Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "samples" wg kryterium: Temat


Wyświetlanie 1-87 z 87
Tytuł:
Further Discussion on Modeling of Measuring Process via Sampling of Signals
Autorzy:
Borys, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/226039.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
measuring process
sampling of signals
smearing of signal samples
averaging of signal samples
Opis:
In this paper, we continue a topic of modeling measuring processes by perceiving them as a kind of signal sampling. And, in this respect, note that an ideal model was developed in a previous work. Whereas here, we present its nonideal version. This extended model takes into account an effect, which is called averaging of a measured signal. And, we show here that it is similar to smearing of signal samples arising in nonideal signal sampling. Furthermore, we demonstrate in this paper that signal averaging and signal smearing mean principally the same, under the conditions given. So, they can be modeled in the same way. A thorough analysis of errors related to the signal averaging in a measuring process is given and illustrated with equivalent schemes of the relationships derived. Furthermore, the results obtained are compared with the corresponding ones that were achieved analyzing amplitude quantization effects of sampled signals used in digital techniques. Also, we show here that modeling of errors related to signal averaging through the so-called quantization noise, assumed to be a uniform distributed random signal, is rather a bad choice. In this paper, an upper bound for the above error is derived. Moreover, conditions for occurrence of hidden aliasing effects in a measured signal are given.
Źródło:
International Journal of Electronics and Telecommunications; 2020, 66, 3; 507-513
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
QUANTITATIVE METHODS IN ACCOUNTING RESEARCH
Autorzy:
Gruszczyński, Marek
Powiązania:
https://bibliotekanauki.pl/articles/453702.pdf
Data publikacji:
2009
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Katedra Ekonometrii i Statystyki
Tematy:
accounting research
corporate disclosure
binary response
choice-based samples
matched samples
sample selection.
Opis:
Quantitative methods are in frequent use in modern accounting research. The evidence may be found e.g. in the journals like “Journal of Accounting Research”, “European Accounting Review”, “Review of Quantitative Finance and Accounting” or in the Accounting Research Network in SSRN base. Paper presents a brief survey of research areas and statistical-econometric approaches in accounting research. Particular reference goes to research on corporate disclosure. Methodological component of the paper includes remarks on the use of binary response models with choice-based and matched samples as well as comments on the sample selection approaches.
Źródło:
Metody Ilościowe w Badaniach Ekonomicznych; 2009, 10, 1; 76-87
2082-792X
Pojawia się w:
Metody Ilościowe w Badaniach Ekonomicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
ON GENERATING MULTIVARIATE SAMPLES WITH ARCHIMEDEAN COPULAS
Autorzy:
Stelmach, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/655822.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
Archimedean copulas
multivariate samples
permutation tests
Opis:
Archimedean copulas are one of the most known classes of copulas. They allow modeling the dependencies between variables with small number of parameters. This paper presents a method designated to generate multivariate samples of the same distribution like primary sample with Archimedean copulas. Such generator may be used in Monte Carlo investigations to create multivariate samples. Apart from theoretical considerations there are presented the examples of application of the method. All the calculations were carried out with R 2.15.0 packages.
Źródło:
Acta Universitatis Lodziensis. Folia Oeconomica; 2014, 3, 302
0208-6018
2353-7663
Pojawia się w:
Acta Universitatis Lodziensis. Folia Oeconomica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Population Genetics Models for the Statistics of dna Samples Under Different Demographic Scenarios---Maximum Likelihood Versus Approximate Methods
Autorzy:
Polański, A.
Kimmel, M.
Powiązania:
https://bibliotekanauki.pl/articles/908157.pdf
Data publikacji:
2003
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
demografia
statystyka
DNA samples
demography
coalescence
Opis:
The paper reviews the basic mathematical methodology of modeling neutral genetic evolution, including the statistics of the Fisher-Wright process, models of mutation and the coalescence method under various demographic scenarios. The basic approach is the use of maximum likelihood techniques. However, due to computational problems, intuitive or approximate methods are also of great importance.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2003, 13, 3; 347-355
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
ESTIMATION OF POPULATION PARAMETERS USING INFORMATION FROM PREVIOUS PERIOD IN THE CASE OF OVERLAPPING SAMPLES – SIMULATION STUDY
Autorzy:
Kowalczyk, Barbara
Powiązania:
https://bibliotekanauki.pl/articles/453323.pdf
Data publikacji:
2013
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Katedra Ekonometrii i Statystyki
Tematy:
survey methodology
rotating surveys
repeated surveys overlapping samples
Opis:
The paper concerns the problem of estimating population parameters for repeated rotating surveys. Coefficients required for theoretical BLUE estimator for rotating surveys are for actual real surveys usually not known. There are no theoretical papers relating to this problem. It is therefore necessary to conduct suitable simulation studies. Broad simulation analyses conducted in the paper are carried out on the basis of two populations: generated from a multivariate normal distribution and based on real data derived from agricultural censuses.
Źródło:
Metody Ilościowe w Badaniach Ekonomicznych; 2013, 14, 1; 283-292
2082-792X
Pojawia się w:
Metody Ilościowe w Badaniach Ekonomicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement the natural radioactivity of Sheep meat samples from Karbala governorate
Autorzy:
Kadhum, Nada Farhan
Omron, Auras Muse
Powiązania:
https://bibliotekanauki.pl/articles/1078152.pdf
Data publikacji:
2019
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
HPGe detector
Natural radioactivity
Soil samples
Wassit governorate
Opis:
In this paper, the measurement of natural radioactivity in Sheep meat samples from different regions of Karbala governorate by using (Na(Tl)) detector. The results of measurements have shown that the specific activity and the determination of some other related parameters such as (Raeq , Hin, Iɣ, Iα, DƔ, Eff dos and AGDE). In fourteen four sheep meat samples by using NaI(Tl) detector. The results have shown that, the mean specific activity of (40K, 238U and 232Th) which were (6.813±1.82 Bq/kg, 3.865±1.033 Bq/kg and 1.02±1.03), respectively, were found to be less than the recommended values of specific activity given by (UNSCEAR, 2000).
Źródło:
World News of Natural Sciences; 2019, 22; 110-118
2543-5426
Pojawia się w:
World News of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New Dynamic Method for Examination of Elastic Properties of Thin Wire Samples
Autorzy:
KVETAN, Karol
KUBLIHA, Marian
OŽVOLDOVÁ, Miroslava
BOŠÁK, Ondrej
NAĎ, Milan
KOTIANOVÁ, Janette
Powiązania:
https://bibliotekanauki.pl/articles/455675.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Rzeszowski
Tematy:
elastic modulus
connected reverse pendulums
thin wire samples
Opis:
Classical reverse pendulums are currently used for measuring the gravity acceleration g, or – when pendulums bodies are connected by the spring – for demonstration of composition of parallel vibrations. In this paper we present the reversed pendulums in „non-traditional” position – as a device for measuring of elastic modulus of wire samples. The connection is realized by the measured wire sample with the circle shape.
Źródło:
Edukacja-Technika-Informatyka; 2015, 6, 2; 179-185
2080-9069
Pojawia się w:
Edukacja-Technika-Informatyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of surfaces for characterization of fungal burden – Does it matter?
Autorzy:
Viegas, Carla
Faria, Tiago
Meneses, Márcia
Carolino, Elisabete
Viegas, Susana
Gomes, Anita Q.
Sabino, Raquel
Powiązania:
https://bibliotekanauki.pl/articles/2177424.pdf
Data publikacji:
2016-05-12
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
surface samples
fungal burden assessment
high fungal load settings
low fungal load settings
air samples
occupational environments
Opis:
Objectives Mycological contamination of occupational environments can be a result of fungal spores’ dispersion in the air and on surfaces. Therefore, it is very important to assess it in both types of the samples. In the present study we assessed fungal contamination in the air and in the surface samples to show relevance of surfaces sampling in complementing the results obtained in the air samples. Material and Methods In total, 42 settings were assessed by the analysis of air and surfaces samples. The settings were divided into settings with a high fungal load (7 poultry farms and 7 pig farms, 3 cork industries, 3 waste management plants, 2 wastewater treatment plants and 1 horse stable) and a low fungal load (10 hospital canteens, 8 college canteens and 1 maternity hospital). In addition to culture-based methods, molecular tools were also applied to detect fungal burden in the settings with a higher fungal load. Results From the 218 sampling sites, 140 (64.2%) presented different species in the examined surfaces when compared with the species identified in the air. A positive association in the high fungal load settings was found between the presence of different species in the air and surfaces. Wastewater treatment plants constituted the setting with the highest number of different species between the air and surface. Conclusions We observed that surfaces sampling and application of molecular tools showed the same efficacy of species detection in high fungal load settings, corroborating the fact that surface sampling is crucial for a correct and complete analysis of occupational scenarios.
Źródło:
International Journal of Occupational Medicine and Environmental Health; 2016, 29, 4; 623-632
1232-1087
1896-494X
Pojawia się w:
International Journal of Occupational Medicine and Environmental Health
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Some Remarks on Statistical Inference for Complex Samples
Uwagi o wnioskaowaniu statystycznym dla prób nieprostych
Autorzy:
Domański, Czesław
Powiązania:
https://bibliotekanauki.pl/articles/904714.pdf
Data publikacji:
2005
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
complex samples
estimation
goodness of fit tests
Opis:
Klasyczna teoria wnioskowania statystycznego dostarcza nam metod estymacji nieznanych parametrów rozkładu, szacowanie postaci funkcji określającej ten rozkład oraz weryfikację hipotez na podstawie prób prostych, tzn. takich, w których obserwacje są niezależne i mają ten sam rozkład prawdopodobieństwa. Na ogół jednak ze względu na koszty i efektywność badań posługujemy się próbami nieprostymi lub złożonymi (complex samples). Wyniki obserwacji w tych próbach są realizacjami stochastycznie zależnych zmiennych losowych o różnych rozkładach. W badaniach reprezentacyjnych wyróżniamy między innymi następujące schematy: losowanie zależne (bez zwracania), losowanie z różnymi prawdopodobieństwami wyboru, warstwowe, zespołowe i wielostopniowe. Przykładowo, losowanie bez zwracania eliminuje stochastyczną niezależność obserwacji, proces warstwowania zróżnicowanie prawdopodobieństw wyboru elementów próby, natomiast losowanie wielostopniowe wpływa na różnorodność rozkładów. Przedmiotem tej pracy są problemy związane z estymacją (metody adaptacji centralnego twierdzenia granicznego dla prób nieprostych) oraz weryfikacja hipotez o zgodności rozkładów dla prób nieprostych.
Classic theory of statistical inference gives us methods and verification of hypothesis for simple samples (observations are stochastically independent and have the same distribution). Because of costs and effectiveness of research we use simple samples. Observations in these samples are stochastically dependent and have different distribution. The paper presents problems in estimation and verifications of hypothesis of consistency of distributions for complex samples.
Źródło:
Acta Universitatis Lodziensis. Folia Oeconomica; 2005, 194
0208-6018
2353-7663
Pojawia się w:
Acta Universitatis Lodziensis. Folia Oeconomica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quantifying the risk of zoonotic geohelminth infections for rural household inhabitants in Central Poland
Autorzy:
Gawor, Jakub
Borecka, Anna
Powiązania:
https://bibliotekanauki.pl/articles/989954.pdf
Data publikacji:
2017
Wydawca:
Instytut Medycyny Wsi
Tematy:
geohelminth eggs
soil samples
contamination
rural environment
Opis:
The objective of this study was to evaluate the risk of soil transmitted zoonotic helminth infections for families with young children, inhabitants of villages in the Mazowieckie Province of Central Poland. Epidemiological survey was conducted at 33 randomly selected households with 2–3 children present. Examination of soil samples from yards surrounding the houses for the presence of geohelminth eggs was conducted, the households were inspected, and family members interviewed using a designed questionnaire. Among 55 localities examined, i.e. 33 backyards, 10 vegetable gardens and 12 sandpits, contamination was found in 2 backyards (6.1%) and 1 sandpit (8.3%) at 3 households (9.1%). Of the total 550 examined soil samples, 4 (0.7%) were found to contain Trichuris and Toxocara eggs, with an average density of 1.5 and 2.0 eggs per sample. The study showed a low level of soil contamination, which was the result of inhabitants care about the sanitation of their domiciles. However, the results of the questionnaire survey demonstrated the need to warn rural residents about the risk factors for zoonotic helmints infections. In particular, parents should be advised how to minimize the threat of parasitic diseases for children in the rural environment. The presented study showed that promotional campaigns implemented in recent years on the prevention of parasitic zoonoses have had little effect to increase the awareness of the rural community. The present results confirmed that Toxocara is the most common zoonotic agent among geohelminths in the rural environment.
Źródło:
Annals of Agricultural and Environmental Medicine; 2017, 24, 1
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Extractive Spectrophotometric Determination of Pd(II) with Sodium salt of hexamethyleneiminecarbodithioate
Autorzy:
Dhanavate, S. D.
Garole, D. J.
Garole, V. J.
Tetgure, S. R.
Sawant, A. D.
Powiązania:
https://bibliotekanauki.pl/articles/412252.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
palladium
sodium hexamethyleneiminecarbodithioate
Extractive Spectrophotometry
synthetic mixture
Real Samples
Opis:
The reagent NaHMICdt•2H2O has found to be a good chelating agent for the spectrophotometric determination of various metal ions. The present investigation deals with spectrophotometric determination of Pd(II) by using NaHMICdt•2H2O. The reagent reacted with Pd(II) to give yellow complex extractable into toluene. Pd (II) was extracted quantitatively in the pH range 0.5-2.0. Pd(II)-HMICdt complex showed λmax at 435 nm. The extracted species has a 1:2 (M:L) stoicheometry. Beer’s law is obeyed in the range of 0.2-0.8 μg ml-1 of Pd (II). The molar absorptivity and the sandells sensitivity were found to be 0.754 x 104 lmol-1cm-1 and 0.0140 μg mol-1 cm-2 respectively. The effect of divers ion on the extraction of Pd(II) has been investigated. The proposed method is highly sensitive, selective, and simple and rapid has been applied for accurate determination of palladium in synthesis mixtures and real samples.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2014, 4; 20-28
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of selected ideas from statistical overlapping samples theory to tendency surveys: Designed panel vs resulting overlapping samples
Autorzy:
Kowalczyk, Barbara
Powiązania:
https://bibliotekanauki.pl/articles/500570.pdf
Data publikacji:
2015
Wydawca:
Szkoła Główna Handlowa w Warszawie
Tematy:
overlapping samples
repeated surveys
business tendency surveys
balance statistics
Opis:
Most tendency surveys are organized to be based on a fixed sample of units across time. This fixed panel constitutes a designed sample. But in practice the resulting sample always differs from the designed one, sometimes quite considerably. In tendency surveys, like in all real surveys, some sampled units refuse to participate, some agree to cooperate but forgo several periods later, some respond irregularly. Consequently, the resulting samples across time never constitute a perfect panel, they form an overlapping sample pattern. In the paper we propose a formula for adjusted balance statistics that takes into account distortion of a sample. The main idea of adjusted balance statistics is analogous to estimators known from statistical overlapping samples theory. Theoretical part of the paper is extended by empirical analysis of monthly business tendency survey data. In particular, the response pattern is studied and comparison of original and adjusted balance statistics is conducted.
Źródło:
Prace i Materiały Instytutu Rozwoju Gospodarczego SGH; 2015, 96: Analyzing and forecasting economic fluctuations; 127-163
0866-9503
Pojawia się w:
Prace i Materiały Instytutu Rozwoju Gospodarczego SGH
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement the natural radioactivity of Chicken meat samples from Karbala governorate
Autorzy:
Ridha, Ali Abdulwahab
Ibrahim, Nadhim Khaleel
Omron, Auras Muse
Kadhum, Nada Farhan
Powiązania:
https://bibliotekanauki.pl/articles/1076107.pdf
Data publikacji:
2019
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Chicken meat samples
Karbala governorate
Na(Tl) detector
Opis:
In this paper, the measurement of natural radioactivity in Chicken meat samples from different regions of Karbala governorate by using (Na(Tl)) detector. The results of measurements have shown that the specific activity and the determination of some other related parameters such as (Raeq, Hin, Iɣ, Iα DƔ, Eff dos and AGDE). In Fourteen four chicken meat samples by using NaI(Tl) detector. The results have shown that, the mean specific activity of (40K, 238U and 232Th) which were (14.272±14.2 Bq/kg, 2.255±0.45 Bq/kg and 1.3±0.26), respectively, were found to be less than the recommended values of specific activity given by (UNSCEAR, 2000).
Źródło:
World Scientific News; 2019, 117; 196-203
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Jak w Polsce rozwija się zjawisko niedostępności respondentów? Analiza na przykładzie badań CBOS 1993–2011
How is the nonresponse phenomenon developing in Poland? A trend analysis of nonresponse in Poland in 1993–2011 based on CBOS research
Autorzy:
Grzeszkiewicz-Radulska, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/413183.pdf
Data publikacji:
2012
Wydawca:
Łódzkie Towarzystwo Naukowe
Tematy:
niedostępność respondentów współczynnik kontaktów
współczynnik kooperacji
próba imienna
próba gospodarstw domowych
PAPI
CAPI
nonresponse
contact rate
cooperation rate
individual samples
household samples
Opis:
Celem artykułu jest przedstawienie i objaśnienie trendów niedostępności respondentów w oparciu o dane z lat 1993–2011 dla sondażu „Aktualne problemy i wydarzenia”, realizowanego techniką wywiadu osobistego przez Centrum Badania Opinii Społecznej. W pracy autorka posługuje się miarami poziomu realizacji przyjętymi przez AAPOR. Wyniki wskazują, że na przestrzeni badanego okresu odsetek odpowiedzi (RR2) spadł o około 40 punktów procentowych, głównie za sprawą wzrostu nieobecności oraz odmów. W analizach wielozmiennowych ustalono, że na kształt krzywej kontaktów (CON1) niekorzystnie wpłynęła przede wszystkim zmiana sposobu doboru próby (przejście z prób gospodarstw domowych na próby imienne) oraz większe obciążenie ankietera pracą. Zmiana sposobu doboru respondentów miała jednak korzystny wpływ na poziom kooperacji (COOP4). Czynniki niesprzyjające partycypacji w sondażach to większe obciążenie ankietera pracą, a także negatywne nastroje społeczne i poprawa sytuacji ekonomicznej w kraju.
1993 to 2011 based on the personal interview survey (CAPI) “Current Problems and Events” conducted in Poland by the Public Opinion Research Center (CBOS). The author shows that since 1993 response rate (RR2) has remarkably decreased (by 40 percentage points) due to nonconatcts and refusals. The findings of multivariate analysis demonstrate that the lower contact rate (CON1) can be explained by changes in sample design (i.e. using individual samples rather than household samples) and interviewer workload. The transition of sampling choices however, positively influenced the level of respondents’ cooperation (COOP4). The adverse factors affecting respondents’ participation are: heavier interviewer workload, a negative social mood and an improvement in the economic situation.
Źródło:
Przegląd Socjologiczny; 2012, 61, 1; 83-111
0033-2356
Pojawia się w:
Przegląd Socjologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of brassica sprouts on short chain fatty acids concentration in stools of rats with thyroid dysfunction
Autorzy:
Dobrowolska-Iwanek, Justyna
Zagrodzki, Paweł
Prochownik, Ewelina
Jarkiewicz, Aneta
Paśko, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/895296.pdf
Data publikacji:
2019-12-29
Wydawca:
Polskie Towarzystwo Farmaceutyczne
Tematy:
thyroid dysfunction
short chain fatty acids
broccoli sprouts
stool samples
Opis:
The aim of the study was to investigate the influence of kohlrabi and broccoli sprouts added to diet on the concentrations of short-chain fatty acids in faeces samples of rats with thyroid dysfunction. Two models of hypothyroidism were used. First one was based on the diet with iodine deficiency and the second by sulfadimethoxine addition to the animal drinking water. In most cases the concentrations of acetic acid, propanoic acid and butanoic acid in stool samples obtained from rats with thyroid dysfunction were insignificantly lower than found in control group. Moreover, almost in all cases the diet enriched with brassica sprouts insignificantly increased the concentration of fatty acids in investigated material. Significant positive correlation between concentrations of butanoic and acetic acids was found in different groups of rats. In conclusion, the addition of brassica or kohlrabi sprouts in rat’s diet may slightly alleviate the decline of concentrations of some fatty acids in stool of animals with thyroid dysfunction. Long term effects of this phenomenon should be evaluated in future studies.
Źródło:
Acta Poloniae Pharmaceutica - Drug Research; 2019, 76, 6; 1005-1014
0001-6837
2353-5288
Pojawia się w:
Acta Poloniae Pharmaceutica - Drug Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zanieczyszczenie wybranych próbek stałych węglowodorami aromatycznymi przy trasach wylotowych z miasta Olecko
PAHs contamination in chosen samples taken from the Olecko region
Autorzy:
Chrząścik, Ireneusz
Szymalska, Magdalena
Kluska, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/1817556.pdf
Data publikacji:
2007-12-31
Wydawca:
Uniwersytet Kardynała Stefana Wyszyńskiego w Warszawie
Tematy:
próbki środowiskowe
sorpcja
węglowodory aromatyczne
environmental samples
sorption
PAHs
HPLC
Opis:
This paper presents the results of research conducted on some samples with soil and cabbage taken from the vicinity of Olecko town (Suwałki, Gołdapia, Ełk, Giżycko) and containing polycyclic aromatic hydrocarbons (PAHs) with 16 aromatic rings, the research is a continuation of a detailed monitoring of progressing pollution in the Olecko region, the samples were taken in August 2006 from the place situated 10 m from a road, this place was at the same time a cabbage plantation, the highest concentration of PAHs (750 pg/kg s. m.) was found in the sample taken close to the road from Olecko to Suwałki and in the sample with cabbage (313 pg/kg s. m.) taken near the road to Gołdapia. The lowest concentration of PAHs was stated in the samples taken in the vicinity of the road to Giżycko, the results don’t overpass the limits permitted in Poland but, unfortunately, are close to the upper limit of natural concentration defined by scientific literature.
Źródło:
Studia Ecologiae et Bioethicae; 2007, 5, 1; 295-304
1733-1218
Pojawia się w:
Studia Ecologiae et Bioethicae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Verification of Hypotheses Concerning Parameters of the Regression Model for Complex Samples
Weryfikacja hipotez dotyczących parametrów modelu regresji dla prób nieprostych
Autorzy:
Domański, Czesław
Powiązania:
https://bibliotekanauki.pl/articles/906878.pdf
Data publikacji:
2007
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
complex samples
test F
testing
design effect
χ² test
Opis:
The paper considers the linear regression function y = βx + ε, where β is a vector of unknown parameters and ε is a rest component. In case of complex samples some modifications of test statistics should be made. Results of simulation study revealed that the verification of the hypothesis H₀:β = β₀ should be conducted by means of modified test F.
Problem szacowania parametrów funkcji regresji na podstawie prób nieprostych jest badany z górą od dwudziestu pięciu lat. Przedmiotem badania będzie liniowa funkcja regresji postaci macierzowej: y = βx + ε, gdzie β jest wektorem nieznanych parametrów, natomiast ε jest składnikiem resztowym. W przypadku prób nieprostych należy dokonać modyfikacji statystyki testowej, uwzględniając tzw. efekt schematu losowania. W pracy prezentowane są wyniki badań symulacyjnych, które wskazują na konieczność weryfikacji hipotezy H₀:β = β₀ za pomocą zmodyfikowanego testu F.
Źródło:
Acta Universitatis Lodziensis. Folia Oeconomica; 2007, 206
0208-6018
2353-7663
Pojawia się w:
Acta Universitatis Lodziensis. Folia Oeconomica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simple, responsive and cost effective simultaneous quantification of Ga(III) and In(III) in environmental water samples
Autorzy:
Grabarczyk, M.
Adamczyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/2082480.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
gallium(III)
indium(III)
trace analysis
environmental
water samples
Opis:
The simultaneous determination of Ga(III) and In(III) in environmental water samples was described. The procedure was based on adsorptive stripping voltammetry using an in situ plated bismuth film electrode as a working electrode. In order to obtain low detection limits and satisfactory separations of gallium and indium peaks on the voltammogram, cupferron was used as a complexing agent. The optimum composition of the supporting electrolyte was found to be: 0.1 mol l-1 acetate buffer (pH=5.0), 2 × 10-4 mol l-1 cupferron, 2 × 10-4 mol l-1 Bi(III), optimal voltammetric parameters were found to be: accumulation potential -0.9 V, accumulation time 60 s. The linear range of Ga(III) as well as In(III) was observed over a concentration range from 2.5 × 10-8 mol l-1 to 1.5 × 10-6 mol l-1. The method was satisfactorily applied to the simultaneous quantification of gallium and indium in environmental water samples. This facilitated a promising application of the recommended procedure for monitoring the environment, which is necessary to evaluate the soil-plant system.
Źródło:
International Agrophysics; 2019, 33, 2; 161-166
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development and application of isothermal amplification methods for rapid detection of F4 fimbriae producing Escherichia coli
Autorzy:
Zhao, L.Y.
Niu, J.H.
Gao, X.L.
Liu, C.N.
Liu, S.M.
Jiang, N.
Lv, X.P.
Zheng, S.M.
Powiązania:
https://bibliotekanauki.pl/articles/2087340.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Escherichia coli
F4 fimbriae
isothermal amplification
rapid detection
clinical samples
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 1; 143-152
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Panel, czyli ujęcie dynamiczne w badaniach społecznych
Autorzy:
Markiewicz, Paulina
Powiązania:
https://bibliotekanauki.pl/articles/2050782.pdf
Data publikacji:
2014-08-31
Wydawca:
Wydawnictwo Adam Marszałek
Tematy:
diachronic research
panel method
social dynamic
social change
sample’s mortality
Opis:
The article presents a specificity of dynamic research based on panel studies. On the basis of chosen examples, including long-term Polish nationwide research, the field of panel studies application as well as difficulties in the implementation of the studies were indicated. The main purpose of this publication was to present some aspects of methodical research tools of panel study projects, that are conducted both by individual researchers and research teams. Basing on examples, panel studies diversified in terms of scope, measurement techniques, sampling and problem assumptions, were presented. The article starts with the research conducted by Ryszard Borowicz at the turn of the sixties and seventies, that includes one typical study cycle of Nicolaus Copernicus University – the research coveres the whole education cycle. Then, the article describes Polish Panel Survey POLPAN research that has been conducted since the end of the eighties. Besides determining individual trajectory of Polish fortunes, the research introduces innovative approach to social structure in a dynamic perspective. The Social Diagnosis panel studies project, of which the first round of studies was held in 2000, was in turn presented in this article with a special emphasis on defining and sampling methods, as well as mechanisms of dealing with the sample’s “mortality”. The last example included in the article, presents the research conducted by Zielonogórski Center (Ośrodek Zielonogórski), in which the panel studies method is particularly applied to the field of pedagogical studies. The comparison of such different projects, in particular studies from the seventies and contemporary studies, allowed to indicate several points differentiating research tools, and in addition, opportunities that are created by using modern technologies in the area of data collection, reaching respondents and dissemination of study results.
Źródło:
Kultura i Edukacja; 2014, 4(104); 332-348
1230-266X
Pojawia się w:
Kultura i Edukacja
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza zużycia stalowych pierścieni współpracujących z żeliwem sferoidalnym poddanym laserowej obróbce cieplnej
A wear analysis of steel rings workings with nodular iron after laser heat treatment
Autorzy:
Paczkowska, M.
Wojciechowski, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/189765.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
zużycie przeciwpróbek
laserowa obróbka cieplna
counter-samples wear
laser heat treatment
Opis:
Celem prezentowanych badań była ocena zużywania przez tarcie stalowych pierścieni współpracujących z żeliwem sferoidalnym poddanym laserowej obróbce cieplnej (LOC). Badania zużycia przez tarcie wykonane zostały na zmodernizowanej maszynie tarciowej Amsler A 135. Próbkę w zestawie pary ciernej stanowił pierścień z zahartowanej objętościowo średniowęglowej stali C45. Przeciwpróbką był prostopadłościan z żeliwa sferoidalnego EN-GJS-500-7 w stanie wyjściowym, zahartowany objętościowo i obrobiony laserowo w celu umocnienia jego warstwy wierzchniej na trzy różne sposoby: hartowanie ze stanu stałego, przetapianie oraz borowanie. Na podstawie wykonanych badań stwierdzono, że LOC mikrostruktury warstwy wierzchniej polegająca na przetopieniu i przynajmniej 4-krotnym zwiększeniu mikrotwardości warstwy wierzchniej (w porównaniu z materiałem rodzimym) przeciwpróbek z żeliwa sferoidalnego spowodowała nawet 3-krotne zmniejszenie ubytku masy współpracujących z nimi pierścieni (w porównaniu z pierścieniami współpracującymi z żeliwem nieobrobionym). W przypadku zastosowania żeliwnych przeciwpróbek po laserowej obróbce polegającej na zahartowaniu warstwy wierzchniej jedynie ze stanu stałego i uzyskaniu mikrotwardości ok. 3-krotnie większej w porównaniu z materiałem rodzimym ubytek masy pierścieni okazał się podobny lub większy od ubytku tych pierścieni, które współpracowały z żeliwem nieobrobionym.
The aim of the presented research was the evaluation of the wear of steel rings working with nodular iron after laser heat treatment (LHT). The wear tests were performed using a modernized friction wear tester Amsler A 135. The sample in the friction couple was thoroughly hardened C45 steel. The counter-sample was a cuboid made of EN-GJS-500-7 nodular iron without any treatment, after thoroughly hardening and after laser treatment in three different ways (to generate a hard surface layer). The three laser treatments were hardening from a solid state, remelting, and boronizing. The research indicated that the laser remelting of the counter-samples’ surface layer causing an increase in hardness (at least 4-times in comparison to the core material) resulted in decreasing the mass loss of the steel rings. This decrease was at least 3-times higher in comparison to steel rings working with counter-samples without any treatment. The mass loss of steel rings working with counter-samples after laser hardening from the solid state (resulting in 300% hardness increase of the surface layer) was similar or higher than the mass loss of rings working with counter-samples without any treatment.
Źródło:
Tribologia; 2015, 5; 99-107
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda opracowania wyników obserwacji bazująca na ich porównaniu z próbami referencyjnymi
Method of the observations processing based on their comparison with the reference samples
Autorzy:
Dorozhovets, M.
Powiązania:
https://bibliotekanauki.pl/articles/154913.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
opracowanie danych
obserwacje
próby referencyjne
data processing
observations
reference samples
Opis:
W artykule została zaproponowana i zbadana metoda opracowania wyników obserwacji, bazująca na ich porównywaniu z próbami referencyjnymi o zadanych właściwościach. Przedstawiono modele matematyczne najlepszego wyniku pomiaru oraz jego standardowej niepewności. Metodą Monte Carlo przeprowadzono badania symulacyjne skuteczności metody dla kilku wybranych rozkładów prawdopodobieństwa populacji przy liczbie obserwacji od 9 do 49. Stwierdzono, że jeśli liczba obserwacji wynosi kilkanaście i więcej, to proponowana metoda zapewnia zmniejszenie niepewności wyniku w porównaniu z niepewnością wartości średniej.
New method of the measurement result and its uncertainty determination, based on the comparison of input sample after its sorting with several reference samples (Fig. 1, Fig. 2), which correspond to models of the general population density distributions, is investigated and analyzed in the paper. Elements of the reference sample are the observations, which ideally reflect the properties of the general population distribution, and their values are calculated as the mathematical expectations of ordinal statistics corresponding to this distribution (1). Mathematical models of the determination of the best result (2), (9) and its standard uncertainty (12), (13) are presented. The effectiveness of propose method is investigated by the Monte Carlo method for 5 models of general population (Laplace, normal, triangular, uniform and arcsine (Fig. 3)) with the number of observations 9, 19, 29, 39 and 49. If the observation distribution significantly differs from normal distribution then the proposed method guarantees considerable decreasing of the uncertainty result in comparison with the uncertainty of average value (Fig. 4). As a result of investigations it is established that if the number of observations exceeds about 12-15, then in approximately ? cases the proposed algorithm identifies distribution correctly and in the rest near ? cases the nearest (accordingly the value of contra kurtosis (5)) distributions (Fig. 5). The proposed method can be used when the number of registered observations is small, when due to this the histogram is unstable and also the statistical tests can be positive for some models of the density distributions of the general populations simultaneously.
Źródło:
Pomiary Automatyka Kontrola; 2009, R. 55, nr 9, 9; 754-757
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Gamma-Ray Spectrometry Laboratory for high-precision measurements of radionuclide concentrations in environmental samples
Autorzy:
Jodłowski, P.
Kalita, S. J.
Powiązania:
https://bibliotekanauki.pl/articles/148485.pdf
Data publikacji:
2010
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
gamma-ray spectrometry
environmental samples
efficiency
self-absorption
coincidence summing
Opis:
The paper outlines the methodology used in the Gamma-Ray Spectrometry Laboratory for high-precision measurements of radionuclide activity concentrations in environmental samples. The Laboratory equipment includes a semiconductor detector HPGe with a 42% relative efficiency. The detector is placed in a Pb housing made of bricks 10 cm in thickness. Three measurement geometries are considered: Marinelli beakers 710 cm3 in volume and two cylindrical geometries 121 and 48 cm3 in volume. In the efficiency calibration (E = 32 division sign 1836 keV) mixed gamma standard solutions were used. Obtained experimental efficiency values epsilon were fitted with two quadratic functions. The junction point is that equivalent to 200 keV. Uncertainty of the calibration curve is 2% for E > 200 keV. The relationship between the total efficiency and the energy epsilon t(E) was also found for energies E = 33 division sign 1250 keV. Self-absorption correction factors Cs are calculated by the method proposed by K. Debertin, the uncertainty level being 1 division sign 2% for E > 100 keV. These correction factors are calculated by an original computer program. Coincidence summing correction factors Cc for the selected nuclides are derived using the ETNA computer program, basing on the relationships epsilon(E) and epsilon t(E). Minimum detectable activity (MDA) for selected nuclides encountered in environmental samples was determined for the water matrix. The methodology used was successfully verified in the course of international intercomparison measurements.
Źródło:
Nukleonika; 2010, 55, 2; 143-148
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Seroprevalence, associated risk factors and clinico-pathological studies of buffalopox disease in various regions of Punjab province, Pakistan
Autorzy:
Usmani, M.W.
Rizvi, F.
Khatoon, A.
Mahmood, M.S.
Powiązania:
https://bibliotekanauki.pl/articles/16539103.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
seropositive
single radial hemolysis
scab samples
PCR
C18L gene
leukocytes
Opis:
Buffalopox (BPX) is a highly contagious disease that causes high morbidity and production losses in buffaloes. During this study, seroprevalence, effect of various associated risk factors, and pathological studies of BPX were recorded in the Punjab province. A total of 97 blood samples and 63 scabs were collected from clinically pox suspected buffaloes. Serum was harvested to perform single radial hemolysis to assess the seroprevalence, and scabs were subjected to PCR for BPX virus confirmation. Results revealed that, animal demographics and environmental associated factors showed significant effect (p<0.05,1<R2>0) on BPX occurrence. The overall BPX seroprevalence was recorded 4.18% in the Punjab province. The BPX was recorded 5.48% in Nili Ravi breed during winter (7.42%), aged 5-7 years (7.46%) under loose housing (5.51%) in the Faisalabad region (8.03%). Further, BPX was 5.37% in pregnant, 6.86% pregnant milking buffaloes during the 3rd lactation period (7.28%) in dairy herds (5.20%). The BPX was 5.22% in non-vaccinated buffaloes where multiple animals were reared together (4.99%) in the herds having 21-30 total number of animals. A total of 49 scab samples were found positive for the BPX virus via PCR with C18L gene amplification. Grossly, inflammatory lesions with pits in the center and wart-like nodules were seen on teats and udder of buffaloes. Increased leukocytes, especially neutrophils and lymphocytes, were seen in the blood of the infected animals. These results provide a broader window to understand the effect of associated risk factors, strengthen the diagnostic aid, and to contain the current spread of BPX in Pakistan to safeguard large ruminant-based livelihood.
Źródło:
Polish Journal of Veterinary Sciences; 2022, 25, 1; 137-147
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Main physical-mechanic properties of concrete samples taken from Bražuolė - first removed dam in Lithuania
Główne właściwości fizykomechaniczne próbek betonu pobranych z Bražuolė - pierwszej usuniętej zapory na Litwie
Autorzy:
Sadzevicius, R.
Adamonyte, I.
Gabrys, K.
Kucharski, M.
Powiązania:
https://bibliotekanauki.pl/articles/2084095.pdf
Data publikacji:
2021
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
concrete samples
dam removal
concrete compression strength
density
water absorption by
weight
Opis:
According to historical records, the dam was first built in the 19th century to power a water mill. In this article, the main attention focused on the main physical-mechanic properties of concrete samples taken from Bražuolė dam – first officially removed dam in Lithuania (in 2020). The purpose of these investigations based on field research is to establish actual quantities of compression strength, density, and water absorption by weight of concrete used in the retaining walls of Bražuolė dam. The concrete water absorption by mass (Wm) and compression strength (fck) testing results based on research data of concrete samples from Bražuolė hydroscheme retaining walls do not meet the requirements of currently valid technical construction regulation.
Źródło:
Acta Scientiarum Polonorum. Architectura; 2021, 20, 4; 11-19
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Method of Calculation of the Specific Electrical Conductivity of the Soil Obtained be the Information and Technical System of Local Operational Monitoring of the Agrobiological State of Agricultural Land
Autorzy:
Brovarets, O.
Powiązania:
https://bibliotekanauki.pl/articles/410708.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:
information and technical system
local operational monitoring
soil
samples
variability
size
research
Opis:
Modern agriculture foresees the implementation of a particular technological operation, according to the appropriate map-task, which is developed pre-based on diverse information. Knowledge of a certain structure of soil cover variability, obtained using information and technical systems of local operational monitoring of the agrobiological state of agricultural lands, allows us to adopt effective operational decisions for efficient management of agrobiological potential of agricultural lands. Obviously, under such conditions there is a need for fundamentally new approaches to agricultural production, which is to ensure the proper quality of technological operations. The quality of the implementation of technological operations is an integral indicator of the efficiency of production of agricultural products within the agrobiological field. The necessary quality of implementation of the basic technological processes in plant growing is provided by the integrated information and technical systems of operational monitoring of the agrobiological state of agricultural lands. This opens new prospects for organic farming using such smart agricultural machines. In connection with it the task is to obtain reliable data on the agrobiological state of the soil environment by reducing the error in determining the magnitude of the electrical conductive properties of the soil, providing individual stabilization of the working electrodes and the mechanism of lifting / lowering the working electrodes, copying inequalities of the soil environment, reducing the intensity of the destruction of the soil structure , selfcleaning of the working contact of the electrode and ensuring the stability of the electrical contact of the electrode with the soil, by instrument design perfection. The task is achieved by using the information and technical system of operational monitoring of the soil environment of the structure to determine the conductive characteristics of the soil environment. The purpose of the research is to determine the critical loading at the loss of stability by thin-walled working electrodes made in the form of working electrodes of various shapes (thin-walled solid, three-spit and four-spindle discs with different thickness of the rim). The information and technical system of localoperational monitoring of agrobiological state of soil environment of different configurations with one-side compression.
Źródło:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2019, 8, 4; 42-49
2084-5715
Pojawia się w:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Information Technology of Optimized Agro-biological State Management of Agricultural Lands
Autorzy:
Snytyuk, V.
Brovarets, O.
Powiązania:
https://bibliotekanauki.pl/articles/411130.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:
soil
samples
size
variability
uncertainty
adequacy
operational monitoring
information and technical system
Opis:
Available techniques for dealing with uncertainties in the agro-industrial complex and their use for describing and assessing the adequacy of the decisions taken are incomplete, and often ineffective, as they usually do not take into account the combination of "field-machine-technological material", which prevents acceptance effective solutions for managing agro-biological potential of agricultural land and, as a consequence, obtaining the maximum economic efficiency of agricultural production. Reliable estimation of variables of agricultural production parameters using the "field-machine-technological material" model makes it possible to provide optimal control of available technical equipment (machinery, sowing machines, etc.), agro-biological (humus content, presence of nutrients, micro-and macro elements, etc. in soil or plant ) and technological resources for making adequate decisions and managing agro-biological potential of agricultural lands, which will provide the necessary economic efficiency. The task is achieved by ensuring the proper quality of the implementation of technological operations that are an integral indicator of economic efficiency and allow providing the necessary economic efficiency through optimal and efficient management of technical means for optimal action on the agro-biological potential of the field and the use of available technological resources. Such control is possible with the use of information and technical systems of local operational monitoring, which are located on machine-tractor units and provide effective control of technological operations by acting on the executive bodies of agricultural machines on the basis of data characterizing the agro-biological state of the soil environment. Information and technical systems of local operational monitoring of the agro-biological state of agricultural lands are used in the following cases: - before performing a technological operation, - simultaneously with the implementation of the technological operation (sowing, fertilizer application, etc.), - during the growing season and after harvesting. This opens new prospects for organic farming using such "smart" agricultural machines.
Źródło:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2019, 8, 2; 27-38
2084-5715
Pojawia się w:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Platinum uptake by mustard (Sinapis alba L.) and maize (Zea mays L.) plants
Autorzy:
Kowalska, J.
Asztemborska, M.
Bystrzejewska-Piotrowska, G.
Powiązania:
https://bibliotekanauki.pl/articles/147295.pdf
Data publikacji:
2004
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
platinum
plant samples
voltammetry
mass spectrometry with inductively coupled plasma (ICP-MS)
Opis:
The ability of platinum uptake by hydroponically cultivated plants - Indian mustard (Sinapis alba L.) and Anawa maize (Zea mays L.) - was investigated. The efficiency of the transport of platinum compounds from the roots to above ground organs was estimated. For platinum determination in plant samples, digested in closed system with microwave energy, very sensitive analytical methods were applied - adsorptive stripping voltammetry (AdSV) and mass spectrometry with inductively coupled plasma (ICP-MS). For validation of the obtained results the recovery of platinum was examined. The accumulation factors (AF) of platinum: more then 800 and 400 for roots of Indian mustard and Anawa maize, respectively and about 90 and 30 for above ground organs of both species were found.
Źródło:
Nukleonika; 2004, 49,suppl.1; 31-34
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Narzędzia do oceny funkcjonalnej zdolności do wykonywania wybranych czynności pracy
Functional capacity assessment tools to perform selected work activities
Autorzy:
Tokarski, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/31342482.pdf
Data publikacji:
2022
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
próby pracy
ocena zdolności do pracy
work samples
evaluation of work capacity
Opis:
Ocena zdolności do wykonywania pracy jest bardzo istotnym elementem w aspekcie powrotu do pracy, np. osób po chorobie lub wypadku oraz osób z niepełnosprawnościami. Ocena ta po winna być przeprowadzona na podstawie znormalizowanych kryteriów. W artykule przedstawiono propozycję narzędzi do oceny funkcjonalnej, dotyczącej możliwości wykonywania wybranych czynności pracy na wielu stanowiskach, na których wymagane są: przyjmowanie zróżnicowanych pozycji ciała, zaangażowanie kończyn górnych, praca precyzyjna i praca powtarzalna.
Assessment of the ability to work is a very important element in terms of return to work, e.g. in regard of persons coming out of illness or accident, and in relation to disabled persons. The assessment should be based on standardized criteria. The article presents a proposal of tools for functional assessment of activities performed simultaneously at numerous workplaces with various body positions, upper limbs, manual and repetitive activities.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2022, 11; 17-19
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of di-n-butyl Phthalate in Environmental Samples
Autorzy:
Ziembowicz, Sabina
Kida, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/27315758.pdf
Data publikacji:
2023
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
di-n-butyl phthalate
aqueous samples
landfill leachate
solid phase extraction
method validation
Opis:
A devised methodology presented here allows the determination of di-n-butyl phthalate in environmental samples (water and landfill leachate) using solid-phase extraction (SPE) and gas chromatography. It is developed based on the use of a gas chromatograph with an FID detector. Preliminary testing has also provided extraction parameters and conditions for chromatographic determination, with calibration applied by reference to an internal standard. The linearity of the calibration curve has been tested in DBP concentrations ranging from 0 to 7.5 mg/L, with the data obtained showing that, throughout this range, the detector readings as a function of the DBP concentrations remain linear (R2 coefficient >0.99). The average levels of recovery of DBP from aqueous solutions of phthalates are in the range of 97-109%, while the corresponding figures for leachates are 85-101%. The values of the coefficients of variation associated with the results obtained do not exceed 5%. The results, therefore, indicate that the applied extraction method is effective as regards DBP extraction from both water and landfill leachate, while numerous other substances present in the leachate from landfill sites apparently do not affect the correct determination of di-n-butyl phthalate by the method developed.
Źródło:
Rocznik Ochrona Środowiska; 2023, 25; 242--249
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of the detection efficiency of haemoparasite DNA in blood and faecal samples – the way to eco-epidemiological studies
Autorzy:
Bajer, A.
Dwużnik, D.
Tołkacz, K.
Alsarraf, M.
Mierzejewska, E.J.
Powiązania:
https://bibliotekanauki.pl/articles/2085115.pdf
Data publikacji:
2019
Wydawca:
Instytut Medycyny Wsi
Tematy:
Babesia canis
Babesia microti
Babesia vulpes
Hepatozoon canis
red fox
faecal samples
faeces
Opis:
Introduction and objective. It is easier and non-invasive to obtain faecal samples compared with blood samples. Molecular techniques may enable detection of parasites even in tiny amounts of blood-containing faeces. We aimed to compare the sensitivity of detection of three Babesia species and Hepatozoon canis in blood and faecal samples, including samples derived from naturally infected hosts. Materials and method. Three groups were involved: 1) Nine BALB/c mice infected with Babesia microti sampled during acute (n=3), post-acute (n=3) and chronic phases of infection (n=3); 2) Eight dogs with symptoms of babesiosis; 3) Six red foxes infected with B. vulpes, one fox infected with B. canis, four foxes infected with H. canis. Genomic DNA was extracted from blood and faeces by use of commercial kits and amplified with genus-specific primers in one-step or nested PCR reactions. Selected PCR products were sequenced. Results. No positive results for faecal samples were obtained from H. canis-positive foxes in contrast to Babesia spp. infections. Positive results from PCRs were obtained for all BALB/c mice (100%), five dogs (62.5%) and four of seven foxes (57.1%). Successful sequencing was obtained for six selected murine samples (B. microti), four canine samples (B. canis) and for one fox sample (B. vulpes). The success of B. microti detection in murine faecal samples from acute, post-acute and chronic phases was identical (100%). Conclusions. Detectability of Babesia spp. infections was lower in naturally infected dogs and foxes, compared to experimentally infected mice. Detection of DNA in faecal samples can be useful in the detection of Babesia infection in populations from which blood samples are hard to obtain, but due regard must be given to the possibility that prevalence of infection may be severely underestimated.
Źródło:
Annals of Agricultural and Environmental Medicine; 2019, 26, 4; 538-543
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rapid and simple screening of transgenic mice: novel extraction-free, filter-based PCR genotyping from blood samples
Autorzy:
Suematsu, Naoya
Isohashi, Fumihide
Powiązania:
https://bibliotekanauki.pl/articles/1041227.pdf
Data publikacji:
2006
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
cytosolic acetyl-CoA hydrolase
blood samples
PCR genotyping
transgenic mice
FTA filter paper
Opis:
We evaluated the effectiveness of using Flinders Technology Associates (FTA) filter paper for the polymerase chain reaction (PCR) genotyping of transgenic mice. Tail prick blood sample dried on an FTA filter disc was processed for genomic PCR. It is easy and rapid to prepare DNA templates because the protocol is extraction-free and only requires minimal handling of wash briefly bloodstained FTA filter discs. Progeny of a transgene-positive founder mated with wild-type mice was screened for the presence of the transgene by the filter-based PCR using transgene-specific primers. The resulting amplicons with expected sizes of 3134 bp, 1152 bp, 877 bp and 688 bp were robust and reproducible, allowing a distinction between transgenic (n=44) and wild-type (n=47) mice showing no signal. The filter-based PCR screening took only half a day. The present study confirmed the validity and usefulness of the novel rapid extraction-free genotyping method.
Źródło:
Acta Biochimica Polonica; 2006, 53, 3; 613-613
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odwzorowanie matematyczne procesu obróbki termicznej prosa w piecu konwekcyjnym
Mathematical representation of millet seeds’ thermal processing in convection - type oven
Autorzy:
Oszczak, Z.
Panasiewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/286928.pdf
Data publikacji:
2005
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
przygotowanie próbek
nasiona
badanie
odwzorowanie matematyczne
seeds samples
preparation to experiments
mathematical representation
Opis:
W pracy przedstawiono metodę doboru funkcji matematycznej umożliwiającej projektowanie przebiegu procesu obróbki cieplnej próbek ziarna lub nasion kierowanych do dalszych badań. Metoda umożliwia dobór obliczeniowy wymaganych wartości wilgotności oraz temperatur końcowych w zależności od czasu obróbki cieplnej oraz wilgotności początkowej. Zasady metody i procedurę wykonawczą zilustrowano przykładem przygotowania próbki 50g ziarna prosa poddanej obróbce cieplnej w suszarce uniwersalnej typu SUP-4 o mocy znamionowej 1200 W z konwekcyjnym wymuszeniem ruchu powietrza.
Paper presented the method of selecting mathematical representation function that enables to design the thermal processing course for grain or seeds samples provided to further investigations. The method enables analytical selection of required final moisture contents and temperatures depending on heat treatment duration and initial moisture content. Methodological principles and operational procedures were illustrated on an example of preparing 50 g milled seeds’ sample, subjected to thermal treatment in an universal drier SUP – 4 type of rated power 1200 W with convection forced air flow.
Źródło:
Inżynieria Rolnicza; 2005, R. 9, nr 11, 11; 349-357
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Method of calculation of specific electrical conductivity of agro-biological soil environment by stationary contact method of operating electrodes of information and technical system of local operating monitoring
Autorzy:
Brovarets, O.
Powiązania:
https://bibliotekanauki.pl/articles/410686.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:
information and technical system
local operational monitoring
soil
samples
variability
size
research
Opis:
Modern agriculture involves the implementation of a particular technological operation, according to the appropriate map-task, which is developed pre-based on diverse information. Knowledge of a certain structure of soil cover variability, obtained using information and technical systems of local operational monitoring of agro-biological state of agricultural lands, allows us to adopt effective operational decisions for efficient management of agro-biological potential of agricultural lands. Obviously, under such conditions, there is a need for fundamentally new approaches to agricultural production,which is to ensure the proper quality of technological operations. The quality of the implementation of technological operations is an integral indicator of the efficiency of production of agricultural products within the agro-biological field. The necessary quality of implementation of the basic technological processes in plant growing is provided by the integrated information and technical systems of operational monitoring of the agro-biological state of agricultural lands. In connection with this, the task is to obtain reliable data on the agro-biological state of the soil environment by reducing the error in determining the magnitude of the conductive properties of the soil, providing individual stabilization of the working electrodes and the mechanism of lifting / lowering working electrodes, copying inequalities of the soil environment, reducing the intensity of the destruction of the soil structure , self-cleaning of the working contact of the electrode and ensuring the stability of the electrical contact of the electrode with the soil, by instrument design perfection. The task is achieved by using the information and technical system of operational monitoring of the soil environment of the structure to determine the conductive characteristics of the soil environment.
Źródło:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2019, 8, 1; 3-10
2084-5715
Pojawia się w:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technologies of supporting decision in understanding conditions for projecting technological processes
Autorzy:
Brovarets, O. O.
Kovbasa, V. P.
Powiązania:
https://bibliotekanauki.pl/articles/411011.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:
information and technical system
local operational monitoring
soil
samples
variability
size
research
Opis:
Modern agriculture involves the implementation of a particular technological operation, according to the appropriate map-task, which is developed pre-based on diverse information. Knowledge of a certain structure of soil cover variability, obtained using information and technical systems of local operational monitoring of the agrobiological state of agricultural lands, allows us to adopt effective operational decisions for efficient managemen tagrobiological potential of agricultural lands. Obviously, under such conditions, there is a need for fundamentally new approaches to agricultural production, which is to ensure the proper quality of technological operations. The quality of the implementation of technological operations is an integral indicator of the efficiency of production of agricultural products within the agrobiological field. The necessary quality of implementation of the basic technological processes in plant growing is provided by the integrated information and technical systems of operational monitoring of the agrobiological state of agricultural lands. This opens new prospects for organic farming using such "smart" agricultural machines. In connection with this, the task is to obtain reliable data on the agrobiological state of the soil environment by reducing the error in determining the magnitude of the electrical conductive properties of the soil, providing individual stabilization of the working electrodes and the mechanism of lifting / lowering the working electrodes, copying inequalities of the soil environment, reducing the intensity of the destruction of the soil structure , self-cleaning of the working contact of the electrode and ensuring the stability of the electrical contact of the electrode with the soil, by instrument design perfection. The task is achieved by using the information and technical system of operational monitoring of the soil environment of the structure to determine the conductive characteristics of the soil environment. The purpose of this research is to determine the critical loading at the loss of stability by thin-walled working electrodes made in the form of working electrodes of various shapes (thin-walled solid, three-spit and four-spindle discs with different thickness of the rim). Information and technical system of local-operational monitoring of agrobiological state of soil environment of different configurations with one-side compression.
Źródło:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2019, 8, 3; 27-36
2084-5715
Pojawia się w:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of water quality Index for groundwater in Ado Ekiti, Nigeria
Autorzy:
Ibe, P. I.
Aigbedion, I. P.
Marcellinus, M.
Okoli, F. U.
Sola, A. B.
Powiązania:
https://bibliotekanauki.pl/articles/1078083.pdf
Data publikacji:
2019
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Ado Ekiti
ArcGIS 10.3
Groundwater
mapping
water quality index
well samples
Opis:
This research focuses on the ground water quality index in Ado-Ekiti State, Nigeria. Groundwater sample wells were randomly collected and their spatial locations captured using a handheld GPS. Water samples were taken from 45 wells and their physio-chemical properties were analyzed in the laboratory. Spatial distribution maps of the water quality parameters were then developed. Herein, the Kriging method of interpolation from geospatial analyst wizard in Esri ArcGIS software was deployed in the generation of thematic maps of water quality parameters. A drinking water quality index was subsequently developed to describe the overall quality of groundwater in the study area. Laboratory analysis of 34 wells showed water of acceptable use as it conforms to WHO standard, while 11 wells were found to have unsuitable water for domestic use. The results further show spatial variation in the water quality. The south central depicts poor water quality, fair water quality in the south-east, while the North, north east, north-west down to the south west depicted the best water quality.
Źródło:
World News of Natural Sciences; 2019, 22; 93-101
2543-5426
Pojawia się w:
World News of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Лiнгвокультурологiчний та дидактичний потенцiал коротких гумористичних текстiв у системi навчання iноземцiв украïнськоï мови
Linguocultural and didactic potential of short humorous texts in the system of Ukrainian language teaching to foreign students
Lingwokulturologiczny i dydaktyczny potencjał humorystycznych tekstów w systemie nauczania cudzoziemców języka ukraińskiego
Autorzy:
Шевченко, Мирослава
Powiązania:
https://bibliotekanauki.pl/articles/2053479.pdf
Data publikacji:
2021-12-01
Wydawca:
Uniwersytet w Białymstoku. Wydawnictwo Uniwersytetu w Białymstoku
Tematy:
tekst humorystyczny
kryteria wyboru
przykładowe zadania
humorous text
selection criteria
exercise samples
Opis:
Celem badania było uzasadnienie sensowności włączenia tekstów humorystycznych do materiałów edukacyjnych z języka ukraińskiego i wypracowanie metodycznie poprawnego systemu pracy z ich wykorzystaniem. Do realizacji rozmaitych celów badawczych zastosowano różnorodne metody: techniki obserwacyjne, pozwalające wyjaśnić reakcje obcojęzycznych studentów na żarty pojawiające się podczas nauki, eksperyment hipotetyczno-indukcyjny, służący określeniu potencjału dydaktycznego i lingwokulturologicznego proponowanych tekstów oraz eksperyment metodyczny, dający możliwość udowodnienia skuteczności dydaktycznej tekstów humorystycznych. Wyniki badania potwierdzają, że twórcza praca z krótkimi tekstami humorystycznymi zachęci studentów do aktywności, zmotywuje ich do komunikacji w języku ukraińskim i pozytywnie wpłynie na stopień ukształtowania kompetencji komunikacyjnych.
The goal of the research is to explain the reasonability of including humorous texts in study materials for the Ukrainian language, and to work out a methodically correct systemof using them with a foreign audience. Observational methods were used to find out how foreign students react to jokes during the study process, hypothetical and inductive experiment – to define the didactic and linguocultural potential of proposed texts and methodic experiment – to prove the educational efficiency of humorous texts. The research results confirm that creative work with short humorous texts will stimulate students to work actively in the classroom, motivate them to communicate in Ukrainian, and positively influence the level of communication proficiency.
Źródło:
Linguodidactica; 2021, 25; 251-262
1731-6332
Pojawia się w:
Linguodidactica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda określania optymalnej wilgotności ziarna gryki przeznaczonego do płatkowania
Method to determine the optimum moisture content of buckwheat grain provided to flaking
Autorzy:
Oszczak, Z.
Panasiewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/289215.pdf
Data publikacji:
2005
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
przygotowanie próbek
kasza
badanie
odwzorowanie matematyczne
buckwheat groats
preparation of samples
testing
mathematical representation
Opis:
W pracy przedstawiono metodę doboru optymalnej wilgotności próbek ziarniaków (kaszy) gryki przeznaczonych do płatkowania. Metoda została oparta na modelowaniu matematycznym funkcji masy płatków akceptowalnych jakościowo w zależności od wielkości szczeliny roboczej gniotownika oraz wilgotności początkowej surowca. Metodę zilustrowano przykładem przygotowania i płatkowania ziarniaków gryki w gniotowniku „TYTAN” H-759. Trwałość płatków określano wykorzystując tester laboratoryjny typu TG-01.
Paper presented the method of selecting optimum moisture content of the buckwheat grain (groats) intended to faking. The method was based on mathematical modeling of the function of flakes’ mass acceptable by quality, depending on the clearance of working gap in crusher and initial moisture content of material. Method was illustrated by an example of buckwheat grain preparation and flaking in TYTAN H 759 crushing mill. Stability of the flakes was tested in TG – 01 type laboratory tester.
Źródło:
Inżynieria Rolnicza; 2005, R. 9, nr 11, 11; 341-348
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technologia przygotowania próbek do badań wytrzymałościowych materiałów stosowanych w konstrukcjach lotniczych
The technology for preparation of samples for the strength tests of materials used in aviation constructions
Autorzy:
Kozioł, S.
Zbrowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/257433.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
badanie materiałowe
wytrzymałość materiałów
próbka
obróbka ścierna
material testing
material strength
samples
abrasive processing
Opis:
Artykuł prezentuje specjalną technologię wykonania próbek do badań wytrzymałościowych materiałów stosowanych w konstrukcjach lotniczych. Uwzględnia ona specyficzne wymagania dotyczące dokładności i geometrii warstwy wierzchniej próbek do badań wytrzymałości zmęczeniowej. Opisano specjalne urządzenie do ściernej obróbki wykańczającej odcinka po-miarowego oraz wyniki pomiarów uzyskanych dokładności.
The article presents the special technology for manufacturing of the samples for strength tests of materials used in aviation constructions. It considers the specific requirements for accuracy and geometry of the top layer of the samples for strength testing. It describes the special device for abrasive processing for finishing of the tested section and presents the results of measurement of the achieved accuracy.
Źródło:
Problemy Eksploatacji; 2011, 2; 251-263
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dobór procesu kondycjonowania próbek zgodnie z wymaganiami kwalifikacji kompozytów polimerowych do zastosowań w konstrukcjach lotniczych
Selection of samples conditioning process in Accordance with the requirements of qualification polymer matrix composites for use in aircraft construction
Autorzy:
Kaczorowska, E.
Powiązania:
https://bibliotekanauki.pl/articles/213263.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
kondycjonowanie
klimatyzowanie
kwalifikacja kompozytowych materiałów lotniczych
samples conditioning
qualifications of materials
composite
aerospace
Opis:
W artykule przedstawiono sposób kondycjonowania próbek wedlug stosowanych na świecie regulacji dotyczących kwalifikacji kompozytowych materiałów lotniczych (FAA – Federalna Administracja Lolnictwa - Federal Aviation Administration, EASA - Europejska Agencja Bezpieczeństwa Lotniczego - European Aviation Safety Agency, MIL-HNBK – Podręcznik Wojskowy - Military Handbook). Przeprowadzono proces kondycjonowania próbek w komorze klimatycznej o zadanej temperaturze oraz wilgotnosci zgodnie z normq ASTM D5229. Przeprowadzono obliczenia w celu doboru parametrów klimatyzowania oraz dokonano weryfikacji stanu nasycenia próbek. Wykonane obliczenia zwróciły wartość współczynnika dyfuzji, dla badanych próbek wytworzonych w technologii bezautoklawowej z prepregu węglowo-epoksydowego CYTEC MTM46. Znajomość współczynnika dyfuzji pozwolila zmniejszyć czas interwałowego ważenia o 30 %. Dokonano także selekcji rodzajow substancji chemicznych, które mogą mieć wpływ na trwałość materiału kompozytowego. Podsumowano i porównano stosowane procesy kondycjonowania według regulacji stosowanych do kwalifikacji materiałów lotniczych, oraz przeprowadzony process klimatyzowania według normy ASTM D 5229.
Kind of the samples conditioning, used on the world according to the regulations of the qualifications of composite aerospace materials (FAA - Federal Aviation Administration, EASA- European Aviation Safety Agency, MIL-HNBK - Military Handbook), is presented in this article. The process of conditioning the samples in a climate chamber set temperature and humidity in accordance with the ASTM D5229 was carried out. Calculations were carried out in order to select the parameters of conditioning and a verification of the saturation of the samples. Types of chemicals that may affect the durability of the composite material have also been selected. The processes of conditioning according to the regulations applicable to the qualification of aerospace materials and conditioning process according to the ASTM D 5229 were summarized and compared. Keywords: samples conditioning, qualifications of materials, composite, aerospace.
Źródło:
Prace Instytutu Lotnictwa; 2016, 3 (244); 83-89
0509-6669
2300-5408
Pojawia się w:
Prace Instytutu Lotnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie analizy obrazu do oceny przełomów próbek po teście udarności
Usage of image analysis to characterization of fractures after impact tests
Autorzy:
Drozd, K.
Walczak, M.
Powiązania:
https://bibliotekanauki.pl/articles/314985.pdf
Data publikacji:
2012
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
analiza obrazu
przełom
próba Charpy'ego
image analysis
fracture of samples
Charpy test
Opis:
Praca zawiera wyniki analizy przełomów uzyskanych podczas testu udarności dla standardowych próbek stalowych z karbem typu Messnager. Próbki były ulepszane cieplnie przy zastosowaniu parametrów obróbki o różnych wartościach a niektóre grupy próbek dodatkowo eksponowano w środowisku korozyjnym. Badania polegały na wyznaczaniu względnego udziału strefy nieodkształconej powierzchni przełomów. Wartość tego udziału umożliwia wnioskowanie dotyczące kruchości materiału w warunkach badania udarności. Badania prowadzono z wykorzystaniem komputerowej analizy obrazów. Stwierdzono istotne zależności pomiędzy analizowaną budową przełomów a wszystkimi badanymi cechami i parametrami obróbki materiału.
The paper consists the results of fracture analysis which were obtained during impact Charpy test for standard Messnagers' specimens with notch. The preparation of the samples were conducted with variable parameters of heat treatment and some groups of samples were exposed in salt sprey chamber. The studies consisted in determination of relative part of unstrained surface of fractures. The value of this contribution allows to deduce the fragility of material in impact test conditions. The studies were conducted using computer applications for image analysis. There were observed significant correlations between structure of the fractures and all parameters of material and samples treatment.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2012, 13, 7-8; 76-80
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bayesian estimation and prediction based on Rayleigh record data with applications
Autorzy:
Awwad, Raed R. Abu
Bdair, Omar M.
Abufoudeh, Ghassan K.
Powiązania:
https://bibliotekanauki.pl/articles/1827533.pdf
Data publikacji:
2021-09-06
Wydawca:
Główny Urząd Statystyczny
Tematy:
Bayesian estimation and prediction
Rayleigh distribution
record values
Markov Chain Monte Carlo samples
Opis:
Based on a record sample from the Rayleigh model, we consider the problem of estimating the scale and location parameters of the model and predicting the future unobserved record data. Maximum likelihood and Bayesian approaches under different loss functions are used to estimate the model's parameters. The Gibbs sampler and Metropolis-Hastings methods are used within the Bayesian procedures to draw the Markov Chain Monte Carlo (MCMC) samples, used in turn to compute the Bayes estimator and the point predictors of the future record data. Monte Carlo simulations are performed to study the behaviour and to compare methods obtained in this way. Two examples of real data have been analyzed to illustrate the procedures developed here.
Źródło:
Statistics in Transition new series; 2021, 22, 3; 59-79
1234-7655
Pojawia się w:
Statistics in Transition new series
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania jądrowego DNA w materiale kostnym - opis wybranych przypadków
Examination of nuclear DNA in bone material - selected cases
Autorzy:
Dębska, Magdalena
Spólnicka, Magdalena
Zbieć-Piekarska, Renata
Powiązania:
https://bibliotekanauki.pl/articles/499764.pdf
Data publikacji:
2013
Wydawca:
Centralne Laboratorium Kryminalistyczne Policji
Tematy:
identyfikacja szczątków ludzkich
badania DNA materiału kostnego
identification of human remains
DNA typing
bone samples
Opis:
Kości niejednokrotnie stanowią jedyne źródło materiału biologicznego pozwalającego na typowanie DNA w przypadku spraw archiwalnych, identyfikacji zaginionych osób, czy też identyfikacji ofiar katastrof. Wynika to z unikalnych cech budowy kości, stanowiących swoistą barierę fizyczną i chemiczną dla czynników powodujących degradację. W artykule przedstawiono kilka przypadków, w których jedynym dostępnym materiałem badawczym był materiał kostny. Dzięki zastosowaniu metodyki badań kości, stosowanej w Centralnym Laboratorium Kryminalistycznym Policji, możliwym było uzyskanie pozytywnych wyników badań. Spośród 13 badanych próbek, dla różnego rodzaju kości, we wszystkich przypadkach uzyskano pełne profile DNA. Jedynie w przypadku badań kości potylicznej otrzymano niepełny profil DNA. Badane kości różniły się budową w zależności jaki stanowiły element szkieletu. W prezentowanych sprawach różny był także wpływ czynników zewnętrznych mających znaczenie w przypadku degradacji DNA.
It happens quite often that bones constitute the only source of biological material allowing for DNA profiling in old cases, identification of missing individuals or unknown remains. This is due to a bone structure providing unique physical and chemical barrier for degrading factors. The aim of this article was to describe cases where the only biological material for examination involved bone samples. Methods routinely used for bone and teeth examination by experts from the Central Forensic Laboratory of the Police allowed for obtaining positive results. Out of 13 examination samples (bones), in all cases full DNA profiles were obtained. The exception was the examination of occipital bone which resulted in partial profile. Examined bones differed in terms of structure depending on which part of skeleton they originated from. In the discussed cases, the impact of external factors contributing to degradation of DNA also varied.
Źródło:
Problemy Kryminalistyki; 2013, 279; 22-28
0552-2153
Pojawia się w:
Problemy Kryminalistyki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie własności wybranej charakterystyki sygnału sinusoidalnego wyznaczanej na podstawie sześciu próbek sygnału
Study of selected sinusoidal signal characteristic obtained from six signal samples
Autorzy:
Sienkowski, S.
Krajewski, M.
Powiązania:
https://bibliotekanauki.pl/articles/158483.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
sześć próbkek sygnału
funkcja autokorelacji
wartość średniokwadratowa
six signal samples
autocorrelation function
mean square estimator
Opis:
W artykule przedstawiono wyniki badania własności wybranej charakterystyki sygnału sinusoidalnego wyznaczanej na podstawie możliwie najmniejszej liczby próbek sygnału. Do badań zastosowano funkcję autokorelacji sygnału. Pokazano, że do wyznaczania wartości funkcji autokorelacji wystarczy sześć próbek sygnału oraz, że podczas obliczania wartości funkcji autokorelacji odpowiedni dobór parametrów sygnału powoduje wyeliminowanie skutków operacji kwantowania.
This paper presents the results of a research of the selected sinusoidal signal characteristic obtained from the smallest possible number of the signal samples. Research was carried out using the autocorrelation function. It was shown that the values of the autocorrelation function can be determined on the basis of six signal samples. It was also shown that the appropriate selection of the signal parameters eliminates the effects of quantization. Chapter 1 provides basic information on the reasons for study of the autocorrelation function properties. In Chapter 2 the results of the theoretical study were presented. Th. 1 deals with the determination of the sinusoidal signal autocorrelation function and her estimator, when M >> 1, where M is the number of samples. Eq. (1) describes the relation between the number of samples and the delay times of the autocorrelation function. Eq. (3) presents the autocorrelation function estimator. In the second Theorem, it has been shown that, to determine the autocorrelation function values can be used only six sinusoidal signal samples. In the next part of Chapter 2 the third Theorem has been presented. It has been shown that if the initial phase of the signal is equal to (...)/2, then the effects of quantization are eliminated. In Chapter 3 the results of the experimental research were presented. Eq. (22) and (23) describes the mean of the mean square estimator obtained on the basis the autocorrelation function. In Fig. 1 the eq. (22) and (23) have been shown.
Źródło:
Pomiary Automatyka Kontrola; 2014, R. 60, nr 11, 11; 948-950
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Molecular Identification of Free-living Amoebae Isolated from Artificial Water Bodies Located in Poland
Autorzy:
LEOŃSKA-DUNIEC, Agata
SKOTARCZAK, Bogumiła
ADAMSKA, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/763628.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Jagielloński. Wydawnictwo Uniwersytetu Jagiellońskiego
Tematy:
Artificial water samples, free living amoebae, thermal tolerance test, PCR, DNA sequencing, Acanthamoeba, Vermoamoeba
Opis:
Free living amoebae (FLA) are amphizoic protozoa that are widely found in various environmental sources. They are known to cause serious human infections, including a fatal encephalitis, a blinding keratitis, and pneumonia. The main aim of the study was detection and molecular identification of Acanthamoeba spp., Naegleria fowleri, Balamuthia mandrillaris, Sappinia pedata, and Vermoamoeba vermiformis (formerly Hartmannella vermiformis) in artificial water bodies in North-Western Poland. We examined 86 water samples collected during 2-year period from 43 water bodies, including outdoor and indoor swimming pools, firefighting reservoirs, fountains, as well as water network. The samples were filtrated using Filta-Max® membrane filters (IDEXX Laboratories, USA) and, in order to select potentially pathogenic, thermophilic strains and to limit the number of PCR examined samples, the thermal tolerance test was carried out. Obtained filtrates were transferred to non-nutrient agar plates with E. coli. The agar plates were incubated at 37°C and then proliferated amoebae were passaged at 42°C. DNA was extracted from the thermophilic trophozoites and then polymerase chain reactions and sequence analysis were performed for molecular identification of FLA. From the 86 collected water samples 57 strains of FLA were able to proliferate at 37°C and 7 of them showed ability to proliferate at 42°C. For molecular identification of Acanthamoeba spp. and V. vermiformis, regions of 18S rDNA were amplified. In order to detect B. mandrillaris DNA, we used mitochondrial 16S rDNA as a marker, and for detection of N. fowleri and S. pedata – ITS regions. Based on molecular analysis, isolates were classified to the genus Acanthamoeba (T4 and T11 genotypes, as well as the new genotypes detected earlier in clinical samples and named T16) and V. vermiformis species. Detected strains were highly similar or identical to pathogenic strains detected earlier in patients. Our results show a wide distribution of potential pathogenic FLA, as Acanthamoeba T4, T11, T16 genotypes, and V. vermiformis species in various artificial water bodies located in North-Western Poland and suggest a potential threat to health of humans in this part of the country.
Źródło:
Acta Protozoologica; 2015, 54, 1
1689-0027
Pojawia się w:
Acta Protozoologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania archeologiczne w kościele pw. Imienia Najświętszej Marii Panny w Szczuczynie – sezon 2020
Archaeological research in the church of the Name of the Blessed Virgin Mary in Szczuczyn – season 2020
Autorzy:
Michalik, Jakub
Powiązania:
https://bibliotekanauki.pl/articles/2079992.pdf
Data publikacji:
2020
Wydawca:
Narodowy Instytut Dziedzictwa
Tematy:
Szczuczyn
the Church of the Name of the Blessed Virgin Mary
archaeobotany
botanical samples
Opis:
The article describes the archaeological works carried out in February 2020 in the crypts of the church of the Name of the Blessed Virgin Mary in Szczuczyn (Podlaskie Voivodeship). Works in the crypts in Szczuczyn had been carried out since 2013, however in this case the main aim of the work was to collect botanical samples to analyse the vegetation that was used in the early modern funeral rite. An important element during the work was the proper selection of places from which botanical samples were to be taken, as well as marking the samples and their further segregation. To this end, it was decided to prepare a common sampling system for all the burials.
Źródło:
Raport; 2020, 15; 219-227
2300-0511
Pojawia się w:
Raport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Is it possible to detect lung cancer by trained dogs?
Autorzy:
Rudnicka, J.
Walczak, M.
Jezierski, T.
Buszewski, B.
Powiązania:
https://bibliotekanauki.pl/articles/2052420.pdf
Data publikacji:
2015
Wydawca:
Akademia Bialska Nauk Stosowanych im. Jana Pawła II w Białej Podlaskiej
Tematy:
breath samples
volatile organic compounds
solid phase microextraction
gas chromatography-mass spectometry
canine olfactory
Opis:
During the illness are released volatile organic compounds with specific smell which could have in diagnosis of diseases. The first aim of the study was qualitative and quantitative analysis of exhaled breath samples obtained from patients with lung cancer, healthy volunteers and people with other lung diseases by gas chromatography-mass spectrometry. This study showed that twenty compounds propane, ethanol, isobutane, butane, propanal, 1-propanol, 2-propanol, 2-methylfuran, 2-butanone, benzene, 2-pentanone, pentanal, hexanal, cyclohexanone, 4-heptanone, 2,4-dimethylheptane, 2,3,4-trimethylhexane, 2,3,5-trimethylhexane, 4-methyloctane, α-pinene separated two research groups of patients and healthy controls. The second goal was to evaluate the sensitivity and specificity of canine scent detection using 5 station scent lineup. Among lung cancer patients and complementary samples, overall sensitivity of canine scent detection was 85.54%, while specificity was 71.84%.
Źródło:
Health Problems of Civilization; 2015, 09, 2; 19-26
2353-6942
2354-0265
Pojawia się w:
Health Problems of Civilization
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Informacja geologiczna : podmioty uprawnione, rozporządzanie, gromadzenie, udostępnianie oraz dokumentowanie prawa do informacji geologicznej
Geological information : authorized entities, disposal, collection, presentaion and documentation of rights to geological information
Autorzy:
Piątkowska, M. A.
Powiązania:
https://bibliotekanauki.pl/articles/2075299.pdf
Data publikacji:
2015
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
informacja geologiczna
dane geologiczne
próbki geologiczne
dokumentacja geologiczna
geological information
geological data
geological samples
geological documentation
Opis:
The geological information is data and geological samples together with the results of their processing and interpretation, particularly given in the geological documentation and recorded on data carriers. The right to the geological information is held by the State Treasury. The use of the geological information, for which the right is held by the State Treasury is free of charge, except for the use of data and geological samples, performing geological information without a charge. In the period of 3 years from the date of obtaining activities within the scope of: exploiting minerals from deposits, underground non-reservoir storage of substances, underground storage of waste and activites, in which the water permit is required. In these situations the contract with the Ministry of the Environment or Voivodship Marshal is needed. However the person incurring the cost of the work carried out in result of decisions issued under Act of 9 June 2011 Geological and Mining Law, has already obtained the decision approving the geological documentation of the deposits, he/she is entitled to the exclusive use of the geological information in order to apply for performance of the activities referred in Art. 100 Act, for example for exploiting the minerals from the deposits.
Źródło:
Przegląd Geologiczny; 2015, 63, 12/1; 1357--1363
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie chromatografii gazowej do detekcji narkotyków w technice kryminalistycznej
Autorzy:
Krzyżewska, I.
Kozarska, A.
Powiązania:
https://bibliotekanauki.pl/articles/273728.pdf
Data publikacji:
2016
Wydawca:
Roble
Tematy:
wykrywanie narkotyków
techniki kryminalistyczne
chromatografia gazowa
próbki biologiczne
drugs detection
forensic techniques
gas chromatography
biological samples
Opis:
Celem pracy jest wprowadzenie do detekcji narkotyków w technice kryminalistycznej przy zastosowaniu chromatografii gazowej. Praca przedstawia opis technik kryminalistycznych, próbek biologicznych podlegających badaniu na obecność narkotyków, proces przygotowania próbek do oznaczania oraz krótkie scharakteryzowanie i podział najważniejszych środków psychoaktywnych.
Źródło:
LAB Laboratoria, Aparatura, Badania; 2016, 21, 2; 12-20
1427-5619
Pojawia się w:
LAB Laboratoria, Aparatura, Badania
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of three different preservative techniques on the mechanical properties of the ovine cortical bone
Autorzy:
Wieding, J.
Mick, E.
Wree, A.
Bader, R.
Powiązania:
https://bibliotekanauki.pl/articles/306558.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
właściwości mechaniczne
kość korowa
zamrażanie
mechanical properties
chemical preservatives
cortical bone
freezing
fresh bone samples
Opis:
Purpose: Preservative treatments are necessary for disinfection and long term storage when dealing with biological tissue. Freezing is a gold standard but infectious risk can only be eliminated by using chemical fluids that may alter the mechanical properties, depending on their composition. Therefore, we experimentally evaluated the influence of freezing and of two commonly used preservative fluids (formalin and alcohol) on the intrinsic mechanical properties of ovine cortical bone samples, compared to purely fresh samples. Methods: Prismatic specimens were prepared from the sheep’s metacarpal bones and were divided into four groups (fresh, fresh-frozen, formalin and alcohol). All samples underwent four-point-bending; fresh samples were tested immediately, preserved samples were tested after 14 days. Bending modulus, bending strength, yield strength and energy absorption for the elastic and plastic region were determined. Results: Significant differences were found for the plastic energy absorption for formalin (–41%) and alcohol (+37%) preservation compared to fresh samples. Formalin preservation revealed embrittlement of the cortical bone samples and alcohol preservation revealed higher ability of plastic energy absorption. Conclusions: Our results indicate that freezing has no influence on the mechanical properties of the ovine cortical bone. Preservation with chemical fluids (formalin and alcohol) showed no influence on the elastic properties but it was observed for the ability of plastic energy absorption. Therefore, these methods seem to be suitable for preservation without evident altering of the elastic mechanical properties.
Źródło:
Acta of Bioengineering and Biomechanics; 2015, 17, 1; 137-146
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania metody opracowania losowych obserwacji na podstawie równoległego ich porównania z zestawem obserwacji referencyjnych
Investigations of the method for processing the random observations based on their parallel comparison with a set of the reference observations
Autorzy:
Dorozhovets, M.
Powiązania:
https://bibliotekanauki.pl/articles/158183.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
opracowanie
obserwacje
obserwacja referencyjne
statystyki pozycyjne
processing
observations
reference
order statistics
reference samples
measurement result
Opis:
W artykule zbadano metodę statystycznego opracowania losowych nieskorelowanych obserwacji o nieznanych a priori rozkładach prawdopodobieństwa (RP). Metoda polega na równoległym porównaniu uporządkowanych obserwacji z zestawem obserwacji referencyjnych, którymi są wartości przeciętne losowych statystyk pozycyjnych odpowiadających wybranym RP. Przedstawione są wyniki badań metodą Monte-Carlo skuteczności zaproponowanych algorytmów obliczania wyniku pomiaru. Metoda zapewnia mniejsza standardową niepewność wyniku pomiaru w porównaniu z niepewnością wartości średniej.
In the paper the method for statistical processing of random uncorrelated observations of unknown a priori probability density distribution (PDD) of the population is investigated. The method is based on parallel comparison by the weighted least squares method ((1), Fig. 2) of the sorted input observations with the collection of the so-called reference observations (Fig. 1) which are the expected values of order statistics, that correspond to the specified PDD. The results of comparison are the estimators of the location ž (measurement result) and width ? parameters (1) of the input observations. The analysis of the residual sums of squares (RSS) (5, Fig. 3) deviations of the input from the all set reference observations is used for determining the best measurement result. The measurement result according to algorithm A1 is based on determination of the minimum value of all RSS (6, Fig. 3), (7) and according to the algorithm A2 the result is calculated as the weighted mean from all results (8), (9). In this case the weight coefficients are proportional to the inverse values of appropriate RSS. The efficiency of both algorithms is investigated by the Monte-Carlo method. It has been stated that algorithm A1 provides the best (after standard deviation) measurement result if the input observations are obtained from population whose PDD is also used for forming the reference observations (Figs. 4, 5). If the input observations are obtained from population whose PDD is not used for forming the reference observations, then algorithm A2 provides the best results. And both algorithms ensure better measurement results in comparison with the average value (Figs. 4, 5).
Źródło:
Pomiary Automatyka Kontrola; 2010, R. 56, nr 10, 10; 1201-1204
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Variability of mercury content in coal matter from coal seams of the Upper Silesia Coal Basin
Zmienność zawartości rtęci w materii węglowej pokładów GZW
Autorzy:
Wierzchowski, K.
Chećko, J.
Pyka, I.
Powiązania:
https://bibliotekanauki.pl/articles/219108.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
materia węglowa
GZW
próbki pokładowe
rtęć
coal matter
Upper Silesia Coal Basin
seam samples
mercury
Opis:
The process of identifying and documenting the quality parameters of coal, as well as the conditions of coal deposition in the seam, is multi-stage and extremely expensive. The taking and analyzing of seam samples is the method of assessment of the quality and quantity parameters of coals in deep mines. Depending on the method of sampling, it offers quite precise assessment of the quality parameters of potential commercial coals. The main kind of seam samples under consideration are so-called “documentary seam samples”, which exclude dirt bands and other seam contaminants. Mercury content in coal matter from the currently accessible and exploited coal seams of the Upper Silesian Coal Basin (USCB) was assessed. It was noted that the mercury content in coal seams decreases with the age of the seam and, to a lesser extent, seam deposition depth. Maps of the variation of mercury content in selected lithostratigraphic units (layers) of the Upper Silesian Coal Basin have been created.
Użytkowanie węgla związane jest z emitowaniem do atmosfery wielu zanieczyszczeń. Jednym z nich, szczególnie niebezpiecznym dla zdrowia i życia ludzi, są związki rtęci. Zanieczyszczenie to szczególnie łatwo rozprzestrzenia się w środowisku i nie ulega biodegradacji. Ocenę jakości węgla prowadzi się na etapie wytwarzania produktów handlowych węgla i ich użytkowania, jak i na etapie przygotowania i prowadzenia eksploatacji. Przykładem tego drugiego jest pobieranie i badanie próbek bruzdowych z pokładów węgla. W zależności od zastosowanych metod ich pobierania dają one możliwości bardziej lub mniej dokładnej oceny parametrów jakościowych, możliwych do uzyskania węgli handlowych. W pracy analizowano zawartości rtęci w pokładach GZW, bazując na standardowo pobieranych przez służby geologiczne kopalń węgla kamiennego, próbkach pokładowych dokumentacyjnych. Są to próbki materii węglowej zawartej w pokładach węgla. Pozyskane próbki poddano kolejnym stadiom rozdrabniania i pomniejszania, aż do uzyskania próbek analitycznych według normy (PN-G-04502:2014-11, 2014). W próbkach analitycznych, poza standardowym zakresem analiz, oznaczono dodatkowo zawartości rtęci. Każda pobrana próbka posiada przyporządkowane współrzędne X, Y, Z, określające miejsca jej pobrania. Pozyskane dane wykorzystano do wyznaczenia zależności statystycznych oraz zaproponowano mapy zmienności zawartości rtęci w materii węglowej grup pokładów, opracowane za pomocą oprogramowania SURFER. Rozkład zawartości rtęci w uzyskanych próbkach przedstawiono graficznie w postaci histogramu na rysunku 2. Rozkład danych jest niesymetryczny i charakteryzuje się dodatnią asymetrią. Obliczona wartość średnia zawartości rtęci wynosi 52,5 μg/kg, a wartości dolnego i górnego kwartyna wynoszą odpowiednio 23 i 70 μg/kg. Na rysunku 3 przedstawiono rozrzut zawartości rtęci w zależności od wartości współrzędnej Z (głębokość pobrania próbki), a na rysunku 4 zobrazowano rozrzut zawartości rtęci w zależności od podziału litostratygraficznego karbonu produktywnego GZW, wyrażonego przez numery pokładów. Na obu rysunkach widoczna jest tendencja zmniejszania się zawartości rtęci w materii węglowej zawartej w pokładach wraz z przechodzeniem do starszych warstw i ogólnie głębiej zalegających, chociaż głębokość zalegania pokładów nie jest pochodną wyłącznie wieku pokładów węgla. W obu wypadkach wartości współczynnika R2 są małe i nie upoważniają do wykazania istnienia zależności statystycznej. Następnie obliczono średnie wartości zawartości rtęci w materii węglowej zawartej w poszczególnych warstwach – grupach pokładów, a wyniki obliczeń zestawiono w tabeli 1, i na rysunku 5. Dane z tabeli 1 i rysunku 5 uwypuklają tendencje zmian zawartości rtęci w próbkach pokładowych w zależności od głębokości pobrania próbek i budowy litostratygraficznej karbonu produktywnego GZW. Obliczona wartość współczynnika korelacji pomiędzy średnimi zawartościami rtęci w poszczególnych grupach pokładów GZW, a numerami grup pokładów, będących liczbowym odwzorowaniem ogniw litostratygraficznych GZW, jest duża i wynosi 0,86. Populację wyników zawartości popiołu w analizowanych próbkach pokładowych bruzdowych dokumentacyjnych, przedstawiony na rysunku 6, w postaci histogramu. Obliczona wartość średnia zawartości popiołu wynosi 7,64%, a wartości dolnego i górnego kwartyla wynoszą odpowiednio 4,44% i 8,90%. Na rysunkach 7 – 10 przedstawiono prawdopodobne przebiegi izolinii zawartości rtęci w materii węglowej w pokładach warstw libiąskich i łaziskich (Rys. 7), orzeskich (Rys. 8), rudzkich (Rys. 9) i siodłowych (Rys. 10).
Źródło:
Archives of Mining Sciences; 2017, 62, 4; 843-856
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metodyka zabezpieczania środowiskowych śladów wpostaci materiału okrzemkowego
Methodology for securing environmental traces in the form of diatomaceous material
Autorzy:
Bogusz, Iwona
Żelazna-Wieczorek, Joanna
Jesionowska, Izabela
Powiązania:
https://bibliotekanauki.pl/articles/30146546.pdf
Data publikacji:
2023-03
Wydawca:
Centralne Laboratorium Kryminalistyczne Policji
Tematy:
diatomologia kryminalistyczna
okrzemki
procedura zabezpieczania prób srodowiskowych
forensic diatomology
diatoms
procedure for securing environmental samples
Opis:
Wykorzystanie okrzemek jako środowiskowych śladów kryminalistycznych stanowi idealne narzędzie do powiązania osoby z konkretnym miejscem – środowiskiem, a także może być pomocne przy diagnozowaniu utonięć lub przy typowaniu miejsca utonięcia. Narzędzie to jest standardowo stosowane przez organy ścigania w wielu krajach Europy, a także w Australii, Chinach, Indiach oraz Stanach Zjednoczonych Ameryki. Celem niniejszej pracy jest wskazanie możliwych metod i zasad, które powinny być stosowane przy zabezpieczaniu okrzemek na miejscu zdarzenia podczas takich czynności procesowych jak: oględziny i przeszukanie, a także propagowanie wiedzy z zakresu diatomologii kryminalistycznej w Polsce. Niniejsza metodyka została opracowana w oparciu o uznane i powszechnie stosowane doświadczenia w pozyskiwaniu i zabezpieczaniu okrzemek do celów badan z zakresu ich taksonomii i ekologii na podstawie piśmiennictwa. Rekomendujemy procedurę postępowania przy zabezpieczaniu materiału okrzemkowego oparta na metodach stosowanych i wypracowanych przez naukowców oraz dostosowana do warunków i technicznych możliwości, którymi dysponuje polski policjant – technik kryminalistyki.
The use of diatoms as environmental forensic traces is an ideal tool for linking a person to a specific place – environment, and may also be helpful in diagnosing drownings or determining the place of drowning. This is a standard tool used by law enforcement agencies in numerous European countries, as well as in Australia, China, India and the United States of America. The aim of this work is to indicate possible methods and principles that should be used to secure diatoms at the scene during procedural activities such as site examination and search, as well as to promote knowledge in the field of forensic diatomology in Poland. This methodology was developed based on recognized and widely used experience in obtaining and securing diatoms for the purposes of research based on their taxonomy and ecology as well as on the literature. We recommend a procedure for securing diatom material based on methods used and developed by scientists and adapted to the conditions and technical capabilities available to a Polish police officer – a forensic technician.
Źródło:
Problemy Kryminalistyki; 2023, 319; 5-18 (pol), 39-52 (eng)
0552-2153
Pojawia się w:
Problemy Kryminalistyki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of the correctness of taking LPG samples from a dispenser pursuant to Company Standard ZN/MG/CN-18:2007, based on proficiency testing
Ocena poprawności pobierania próbek LPG z odmierzacza zgodnie z normą zakładową ZN/MG/CN-18:2007 na podstawie badań biegłości
Autorzy:
Bukrejewski, P.
Skolniak, M.
Grzeszczyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/1363473.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
propane-butane
LPG
taking of fuel samples
fuel dispenser
proficiency testing
propan-butan
pobieranie
odmierzacz
badania biegłości
Opis:
The taking of samples is a very important stage in the process of preparing representative material for tests and obtaining reliable test results. The laboratories that strive for high quality of the services they offer should monitor their test results against the background of the results obtained by other reputable laboratories that provide similar services. In the pursuing of this objective, an excellent tool is the proficiency testing, which makes it possible to confirm the competence of laboratories to carry out fuel tests and/or to take fuel samples. The Automotive Industry Institute (PIMOT), as a leading body engaged in Poland in examining the quality of the propane-butane gas (LPG) used as a fuel, organized tests of the proficiency at taking LPG samples from a dispenser at a filling station. The tests were carried out for a number of laboratories that provided services within a similar scope. The laboratories participating in this project took fuel samples and sent them to the organizer for the samples to be tested and for the method of taking the LPG samples to be verified. In the article, the importance of taking the samples and of participating in the tests of proficiency at taking samples of liquefied propane-butane gas has been presented, the method of preparing representative material for tests and of verifying the homogeneity and stability of the batch under test has been described, and the approach to the examination of proficiency at taking LPG samples from a dispenser at a filling station has been discussed. The proficiency test results obtained from the participants have been presented, discussed, and analysed.
Pobieranie próbek jest bardzo istotnym etapem w procesie przygotowania reprezentatywnego materiału do badań i uzyskania miarodajnego wyniku. Laboratoria, które chcą zapewnić wysoką jakość oferowanych przez siebie usług, powinny monitorować uzyskiwane wyniki na tle innych renomowanych laboratoriów świadczących podobne usługi. W tym celu doskonałym narzędziem są badania biegłości umożliwiające potwierdzenie kompetencji laboratoriów do wykonywania badań i/lub pobierania próbek. Przemysłowy Instytut Motoryzacji, jako wiodąca jednostka badająca w Polsce jakość gazu propan – butan stosowanego jako paliwo, zorganizował badania biegłości pobierania LPG z odmierzacza stacji paliw. Uczestnikami były laboratoria świadczące usługi w podobnym zakresie. Uczestnicy pobierali próbki i przesyłali je do organizatora celem wykonania badań i sprawdzenia sposobu pobierania gazu LPG.W artykule opisano znaczenie pobierania próbek oraz uczestnictwa w badaniach biegłości z zakresu pobierania skroplonego gazu propan – butan, omówiono sposób przygotowania reprezentatywnego materiału badawczego, weryfikacji jednorodności i stabilności partii oraz omówiono podejście do badań biegłości z zakresu pobierania LPG z odmierzacza. W artykule przedstawiono wyniki badań biegłości uzyskane od uczestników i dokonano ich omówienia oraz analizy.
Źródło:
Archiwum Motoryzacji; 2017, 78, 4; 27-42
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problemy oceny procedury pomiaru stężenia szkodliwych związków chemicznych w gazach odlotowych powstających podczas termicznego przekształcania odpadów przemysłowych
Problems of quality evaluation of the exhausted gas monitoring during a thermal process of waste industrial conversion
Autorzy:
Borek., R.
Gieroń, M.
Stec, W.
Powiązania:
https://bibliotekanauki.pl/articles/155060.pdf
Data publikacji:
2006
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
jakość pomiarów
składowe gazu
odpady
przygotowanie próbki
quality of measurement
gaseous components
waste composition
samples preparation
Opis:
W artykule rozpatrzono zagadnienia związane z oceną jakości pomiarów wykorzystywanych do wyznaczenia stężeń składników lotnych powstających w procesie termicznego przekształcania odpadów przemysłowych. Zwrócono uwagę na specyficzne problemy pomiaru składników gazów odlotowych. Rozważano sposób pobierania próbki gazów odlotowych i wynikające stąd błędy analizy.
In this article, problems of quality evaluation of the measurements used for designation of gaseous components concentration generated in the thermal process of waste industrial conversion have been discussed. The attention was paid to some measurement problems of the exhausted gas components when the waste composition changes at random. The method of samples preparation of the exhausted gases and errors of their analysis has been considered.
Źródło:
Pomiary Automatyka Kontrola; 2006, R. 52, nr 12, 12; 34-37
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
O specyfice parametru gruntowego w badaniach geologiczno-inżynierskich
On the soil parameter in the engineering-geological investigations
Autorzy:
Wierzbicki, J.
Radaszewski, R.
Powiązania:
https://bibliotekanauki.pl/articles/2075527.pdf
Data publikacji:
2016
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
parametr gruntowy
analiza geologiczno-inżynierska
analiza skupień
rekonstruowane próbki
soil parameter
engineering-geological analysis
cluster analysis
reconstructed samples
Opis:
The paper deals with the contemporary idea ofsoil parameter used in the engineering- geological analysis. The statistical basis of a characteristic and a design value of the geotechnical parameter based on Eurocode 0 is given. On this basis the idea of soil parameter describing as a spline function and its use for subsoil probabilistic analysis is presented. Furthermore, correlation between the results of tests on undisturbed and reconstructed samples, based on diagrams from Polish Standard PN-B-03020:1981, is discussed. Finally, some conclusions regarding the necessity of a more advanced and complex approach to the engineering-geological analysis are proposed.
Źródło:
Przegląd Geologiczny; 2016, 64, 9; 694--700
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oznaczanie wybranych filtrów UV w próbkach wody
Determination of selected UV filters in water samples
Autorzy:
Gackowska, A.
Gaca, J.
Załoga, J.
Powiązania:
https://bibliotekanauki.pl/articles/1217169.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
filtry EHMC
MBBM
oznaczanie
walidacja
próbki wody i ścieków
filters EHMC
labeling
validation
samples of water and wastewater
Opis:
W artykule przedstawiono metody oznaczania wybranych filtrów UV w próbkach wody i ścieków. Opisano procedurę wzbogacania i izolacji dwóch filtrów UV z próbek wody i ścieków. Do analizy wykorzystano chromatograf gazowy sprzężony z detektorami płomieniowo-jonizacyjnym i spektrometrii mas (GC-FID-MS) oraz chromatograf cieczowy wyposażony w detektor z matrycą diod (HPLC-UV-DAD). Dla obu metod wykonano walidację. Etyloheksylo- metoksycynamonian (EHMC) i 1-(4'-t-butylofenylo)-3-(4''-metoksyfenylo-)propano-1,3-dion (MBBM) oznaczono w próbkach wody i ścieków kąpielowych. Oznaczono granicę wykrywalności i oznaczalności oraz wartość odzysku badanych związków. Uzyskano zadowalającą precyzję (RSD 5 -15 %). Przeprowadzono wstępne badania trwałości EHMC pod wpływem działania promieniowania UV. Wykazano, że produktem degradacji EHMC jest pochodna kwasu cynamonowego.
Methods for the determination of selected UV filters in water and wastewater samples have been presented. Procedure for enrichment and isolation of two UV filters from water and wastewater samples was described. Gas chromatograph coupled with flame ionization detector and mass spectrometry (GC-FID-MS) as well as liquid chromatograph equipped with UV and Diode Array (HPLC-UVDAD) detectors were used for the analysis. For both the methods, validation was performed. 2-Ethylhexyl 3- (4-methoxyphenyl)-2- propenoate (EHMC) and 1-(4'-t-butylphenyl)-3-(4''-methoxyphenyl-) propane-1,3-dione (MBBM) were determined in samples of water and bathing wastewater. Limit of detection, limit of quantification and recovery of the tested compounds were determined. The precision was satisfactory (RSD 5-15 %). Preliminary studies on stability of EHMC under influence of UV radiation were carried out. It was found that cinnamic acid derivative was the product of EHMC degradation.
Źródło:
Chemik; 2012, 66, 6; 615-620
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Occurrence of Cryptosporidium, Giardia and Toxoplasma in surface waters in the area of Cracow
Autorzy:
Polus, M.
Kocwa-Haluch, R.
Powiązania:
https://bibliotekanauki.pl/articles/207841.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
protozoa
surface waters
Cryptosporidiosis
Cryptosporidium
Giardia intestinalis
oocysts
water samples
pierwotniaki
wody powierzchniowe
kryptosporydioza
oocysty
próbki wody
Opis:
Despite some knowledge on the risks from exposure to intestinal parasitic protozoa such as Cryptosporidium, Giardia and Toxoplasma, no occurrence studies of these protozoa were conducted in Cracow area. Therefore, the purpose of the work was to examine the presence of Cryptosporidium, Giardia and Toxoplasma in surface water samples including intakes and recreational waters. The study showed that the vast majority of water samples were positive for Cryptosporidium sp., and some of the samples were positive for Giardia intestinalis. None of the tested water samples showed the presence of Toxoplasma. Given the limitations of the research methods used and the limits of detection, these results indicated that the concentration of protozoan cysts/oocysts may range from <1 to dozens oocysts/cysts per liter of water. These concentrations are comparable to the values given in reports of major worldwide outbreaks of cryptosporidiosis or giardiasis, which indicating a need to further investigate Cracow's surface waters.
Źródło:
Environment Protection Engineering; 2014, 40, 2; 105-113
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The quality of marine fuels and the safety of navigation: case studies
Autorzy:
Kamiński, W.
Krause, P.
Gumiński, D.
Rajewski, P.
Powiązania:
https://bibliotekanauki.pl/articles/135064.pdf
Data publikacji:
2016
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
safety of navigation
fuel samples
quality of marine fuels
procedures of fuel handling on board
requirements
failures
Opis:
The quality of marine fuels is standardised by the international standard ISO 8217. As practice shows, even fuels that meet all standard requirements do not completely guarantee avoiding disruptions in smooth and safe operation of the ship. The future is likely to bring more cases of improper operation of vessels, sometimes leading to main propulsion failures. One cause behind main engine breakdowns is the introduction of new products on the fuel market that are intended to meet the ever-increasing requirements of environmental protection (e.g. low sulphur content). As a result, some fuels are chemically different from the previously used residual fuels. Using them in the engine room requires special care on the part of the ship owner and the ship’s crew. The article analyses two cases in which the use of conventional residual fuels resulted in main engine stoppage. The authors, bearing in mind the causes of those failures, focus on technical consequences of using marine fuels produced by currently employed technologies.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2016, 48 (120); 15-21
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania stężeń włókien azbestu w powietrzu na stanowiskach pracy i w środowisku
Testing of the asbestos fibres concentration in the atmosphere at workstations and in the environment
Autorzy:
Kadlewicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/340579.pdf
Data publikacji:
2009
Wydawca:
Główny Instytut Górnictwa
Tematy:
azbest
włókno azbestowe
zagrożenie azbestem
pobieranie próbek
przepis prawny
asbestos fibres
asbestos hazard
collecting samples
asbestos
law
Opis:
W artykule przedstawiono metodykę badań stężeń włókien azbestu w powietrzu, na stanowiskach pracy i w środowisku. Omówiono regulacje prawne, uzasadniające tego typu badania oraz doświadczenia Laboratorium Badań Środowiska Pracy i Ochrony Powietrza Głównego Instytutu Górnictwa (powstało w 1998 r.) z zakresu badań, kontaktów z inwestorami i wykonawcami prac związanych z usuwaniem wyrobów zawierających azbest Badania są wykonywane na stanowiskach pracy, podczas usuwania wyrobów z azbestem z różnych obiektów, głównie z budynków mieszkalnych, oraz w środowisku, na przykład w rejonach remontowanych obiektów, w celu oceny poprawności wykonywanych prac. W artykule przedstawiono także informacje o wyposażeniu Laboratorium, metodyce pobierania próbek powietrza oraz dokumentowaniu i niepewności wyników. Laboratorium Badań Środowiska Pracy i Ochrony Powietrza posiada Certyfikat Polskiego Centrum Akredytacji nr AB 301. Od 2003 roku zakres akredytacji obejmuje między innymi pobieranie próbek do oznaczania stężeń liczbowych włókien respirabilnych azbestu w środowisku pracy i środowisku zewnętrznym. Próbki są pobierane według opracowanej w Laboratorium procedury badawczej (PB-11), w systemie zarządzania zgodnym z normą PN-EN ISO 17025:2005. W ramach wewnątrzinstytutowej współpracy, oznaczenia liczby włókien azbestu w próbkach są wykonywane metodą mikroskopii optycznej w Laboratorium Pomiarów Zapylenia Powietrza GIG według akredytowanej w Polskim Centrum Akredytacji procedury KD-2205-1.
The paper presents the methodology for determining the concentrations of asbestos fibres in the atmosphere, at workstations and in the environment. There have been discussed the legal regulations, that substantiate this type of tests, and the experience of the Testing Laboratory for Work Environment and Atmosphere Protection of the Central Mining Institute, within the scope of testing, relations with the investors and contractors for works connected with the removal of asbestos-containing produets. The tests are being conducted at workstations, when removing the produets with asbestos from various buildings, mainly from dwelling houses, as well as in the environment, for example in the areas of renovated buildings, for estimation of correetness of performed work. In the article, there have also been presented the information on the equipment of the testing laboratory, methodology of collecting air samples, as well as on documenting, and uncertainty of results. The Testing Laboratory for Work Environment and Atmosphere Protection holds the Certificate of the Polish Centre for Accreditation No. AB 301. Since 2003, the scope of accreditation includes among other things, collecting the samples with the aim to determine the numerical concentrations of respirable asbestos fibres in the work and in the outer environment. The samples are being taken in accordance with the testing procedure (PB-11), worked out in the Laboratory, in the management system corresponding with the PN-EN ISO 17025:2005 standard. Within the range of intrainstitute cooperation, determination of the numbers of asbestos fibres in the samples are made by using the optical microscopy method in the Laboratory for Measurements of Atmospheric Dust, according to the KD-2205-1 procedure, aceredited in the Polish Centre for Accreditation.
Źródło:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2009, 4; 19-39
1643-7608
Pojawia się w:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Porównanie wyników szacowania niepewności pomiaru na podstawie próbek dublowanych w monitoringu jakości wód podziemnych, według różnych schematów badań
Comparison of measurement uncertainty estimation results based on duplicate samples of groundwater quality monitoring according to different experimental designs
Autorzy:
Kostka, A.
Powiązania:
https://bibliotekanauki.pl/articles/2075412.pdf
Data publikacji:
2015
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
niepewność pomiaru
próbki duplikowane
zrównoważone badania
niezrównoważone badania
projekt RANOVA
measurement uncertainty
duplicate samples
balanced and unbalanced design
RANOVA
Opis:
In accordance with EU and Polish legal regulations the obtained results of chemical analysis of groundwater monitoring should include the information about the measurement uncertainty. Sampling process, transportation and analysis procedure – all impact the final outcome of measurement. In this paper, on the basis of duplicated samples taken during groundwater monitoring, various calculations of measurement uncertainty were compared via simplified balanced, full balanced and unbalanced experimental designs. The aforementioned estimations differ in terms of number of chemical analysis, which is reflected in the cost of monitoring. The details of results and the possibility of assessing particular components influencing the value of uncertainty derives from the number of undertaken analysis. Calcium, magnesium, bicarbonate and aluminum were investigated. The calculations were made using RANOVA program, applying robust statistics method. Conclusively, the simplified balanced design fulfills the necessary legal requirements at the lowest possible costs. The major drawback associated with this method is the total measurement uncertainty due to the lack of values of components. The full balanced experimental design provides sufficient information on certain components of measurement uncertainty. However, significant financial input is necessary. The unbalanced experimental design, which allows to estimate the contribution of particular components in the total measurement uncertainty, is more affordable and only one extra chemical analysis (for the pair of samples) is needed.
Źródło:
Przegląd Geologiczny; 2015, 63, 10/1; 834--839
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Software for Information and Technical System of Operational Monitoring of Agrobiological State of Agricultural Land of Oleksandr Brovarets Construction
Autorzy:
Brovarets, O.
Powiązania:
https://bibliotekanauki.pl/articles/972983.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:
information and technical system
local operational monitoring
soil
samples
variability
size
research
functional structure
software
program code
management algorithms
Opis:
Modern agriculture involves the implementation of a particular technological operation, according to the appropriate map-task, which is developed pre-based on diverse information. Knowledge of a certain structure of soil cover variability, obtained using information and technical systems of local operational monitoring of the agrobiological state of agricultural lands, allows us to adopt effective operational decisions for efficient management of agrobiological potential of agricultural lands. Obviously, under such conditions, there is a need for fundamentally new approaches to agricultural production, which is to ensure the proper quality of technological operations. The quality of the implementation of technological operations is an integral indicator of the efficiency of production of agricultural products within the agrobiological field. The necessary quality of implementation of the basic technological processes in plant growing is provided by the integrated information and technical systems of operational monitoring of the agrobiological state of agricultural lands. In connection with this, the task is to use a fundamentally new class of information and technical systems of local operational monitoring of the agrobiological state of agricultural lands. The task is achieved by using the information and technical system of operational monitoring of the soil environment of the structure to determine the conductive characteristics of the soil environment. The purpose of this research is to develop and substantiate the functional structure, software, writing code and algorithms for managing the executive bodies of the information and technical system of operational monitoring of the agrobiological state of the soil environment of agricultural lands.
Źródło:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2019, 8, 4; 28-41
2084-5715
Pojawia się w:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of signal loss episodes on fetal heart rate variability measures
Autorzy:
Wróbel, J.
Roj, D.
Jeżewski, J.
Horoba, K.
Kupka, T.
Jeżewski, M.
Powiązania:
https://bibliotekanauki.pl/articles/333711.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Śląski. Wydział Informatyki i Nauki o Materiałach. Instytut Informatyki. Zakład Systemów Komputerowych
Tematy:
fetal heart rate variability
time event series
missing samples
zmienność tętna płodu
zmienność rytmu serca płodu
zdarzenia czasowe
próbka
Opis:
The most important features indicating appropriate fetal development are the measures of instantaneous variability of a fetal heart rate (FHR), describing fluctuations of the beat-to-beat heart intervals. The most popular method for the FHR acquisition is the Doppler ultrasound technique. However, it is very sensitive to various motion artifacts distorting the signal being acquired. The aim of our work was to evaluate the influence of signal loss episodes on the parameters quantitatively describing the instantaneous variability of the FHR. For this purpose we artificially inserted signal loss episodes to the recordings, in different patterns and percentage, in accordance with the real characteristics of the signal loss segments. We particularly would like to answer the question if the signals with significant amount of signal loss can be reliably evaluated by means of instantaneous variability measures, and which of these measures (numerical indices) are more robust to the missing values.
Źródło:
Journal of Medical Informatics & Technologies; 2014, 23; 35-42
1642-6037
Pojawia się w:
Journal of Medical Informatics & Technologies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Access Panel jako wyzwanie nowych technik badawczych opartych na technologiach internetowych: definicje, standardy badań, wskaźniki jakości oraz dostępność respondentów on-line.
The specificity of Access Panel as a challenge of new research techniques based on internet technologies
Autorzy:
Wais, Kamil
Powiązania:
https://bibliotekanauki.pl/articles/413662.pdf
Data publikacji:
2013-12-31
Wydawca:
Łódzkie Towarzystwo Naukowe
Tematy:
internetowe access panele
CAWI
badania reprezentatywne
response rate
rekrutacja panelistów
on-line access panels
representative samples
panelists’recruitment
Opis:
Dokonujący się na świecie rozwój nowych technik ilościowych badań społecznych, opartych na nowych technologiach, jest szczególnie związany ze wzrostem popularności internetowych access paneli. Internetowe access panele umożliwiają szybką realizację różnego rodzaju interdyscyplinarnych badań na niespotykaną dotąd skalę, jednak same w sobie także generują nowe problemy i wyzwania, konieczne do przezwyciężenia przez zarządzających panelami, badaczy i metodologów. Do wyzwań tych można zaliczyć konieczność: sprecyzowania, przeformułowania lub uzupełnienia wielu definicji; przyjęcia odpowiednich standardów badań; wypracowania porównywalnych z sobą, precyzyjnie i formalnie zdefiniowanych wskaźników jakości paneli itp. Dobrym punktem wyjścia do takich rozważań są zapisy normy ISO 26362:2009 oraz wskazówki ESOMAR, dotyczące wykorzystania i funkcjonowania access paneli. Zapisy te nie rozwiązują jednak wielu problemów i konieczne jest ich dalsze precyzowanie i aktualizowanie. Szczególnie istotnymi kwestiami, wartymi rozważenia, są wyzwania związane ze wskaźnikiem response rate oraz reprezentatywnością badań realizowanych na internetowych access panelach. Kluczowym wyzwaniem rozwoju badań tego typu jest również zapewnienie panelistów/respondentów online chętnych do udziału w badaniach społecznych. Doświadczenia różnych access paneli pokazują, że ich potencjał badawczy stale rośnie i może być intensywniej wykorzystywany również w Polsce – zarówno w bliższej, jak i dalszej przyszłości.
The development of new techniques of quantitative social research, which is performing in the world, is particularly associated with an increase in popularity of online access panels. Internet access panels enable rapid implementation of different types of interdisciplinary research on an unprecedented scale, but they also generate new problems and challenges, which are necessary to clarify, reformulate or complete many definitions; adopt appropriate standards of research, develop comparable with each other, precisely and formally defined indicators of panels’ quality, etc. A good starting point for such considerations is the ISO 26362:2009 standard and ESOMAR guidelines concerning the use and functioning of the access panels. These documents, however, do not solve many problems and further refining and updating them is a necessity. Particularly relevant issues worth considering are the challenges associated with the response rate and the representativeness of studies, carried out in online access panels. The key challenge in the development of this type of research is also to ensure the panelists / on-line respondents willing to participate in social research. Experiences from a variety of access panels show that their research capacities continue to grow and can be used more intensively also in Poland – both in the near and distant future.
Źródło:
Przegląd Socjologiczny; 2013, 62, 1; 189 - 208
0033-2356
Pojawia się w:
Przegląd Socjologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of Microstructure and Mechanical Properties of Cast Steel Carried out on Cast-on Samples and Samples Cast Separately
Autorzy:
Kalandyk, B. E.
Zapała, R. E.
Powiązania:
https://bibliotekanauki.pl/articles/1837717.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast steel
cast-on samples
heat treatment
mechanical properties
metallography
staliwo
próbki odlewu
obróbka cieplna
właściwości mechaniczne
metalografia
Opis:
The results of microstructure examinations and UTS, YS, El, RA carried out on low-carbon cast steel containing 0.15% C. The tests were carried out on specimens cut out from samples cast on a large-size casting and from samples cast in separate foundry moulds. It has been shown that significant differences in grain size observed in the material of the separately cast samples and cast-on samples occur only in the as-cast. In the as-cast state, in materials from different tests, both pearlite percent content in the structure and mean true interlamellar spacing remain unchanged. On the other hand, these parameters undergo significant changes in the materials after heat treatment. The mechanical properties (after normalization) of the cast-on sample of the tested cast steel were slightly inferior to the values obtained for the sample cast in a separate foundry mould. The microscopic examinations of the fracture micro-relief carried out by SEM showed the presence of numerous, small non-metallic inclusions, composed mainly of oxide-sulphides containing Mn, S, Al, Ca and O, occurring individually and in clusters.
Źródło:
Archives of Foundry Engineering; 2021, 21, 2; 81-88
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ metodyki opróbowania na niepewność oznaczeń jodków w wodach powierzchniowych Zlewni Górnej Odry i w wodach kopalnianych do niej odprowadzanych
Influence of sampling method on uncertainty associated with iodide determination in Upper Odra River Basin surface water and coalmine water inducted to it
Autorzy:
Drzymała, M.
Powiązania:
https://bibliotekanauki.pl/articles/203903.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
niepewność pomiaru
próbki kontrolne dublowane
analiza wariancji
jodki
jakość wody
measurement uncertainty
control duplicate samples
variance analyses
iodide
water quality
Opis:
Zgodnie z obowiązującymi przepisami Unii Europejskiej (RDW2000; DWP 2006; DT 2009) monitoring jakości wód powierzchniowych i podziemnych powinien obejmować m.in. identyfikację wszystkich źródeł niepewności procedury analitycznej. Ponadto dyrektywa (DT 2009) oraz rozporządzenie (RMOE 2011) wskazują na konieczność prowadzenia programu zapewnienia i kontroli jakości (QA/QC) badań w monitoringu wód, a także podają wartość graniczną niepewności pomiaru szacowanej na poziomie odpowiednich norm jakości środowiska równej 50% lub mniejszej (k = 2).W rozporządzeniu (RMOE 2011) określono również metody referencyjne stosowane w monitoringu wód. W niniejszej pracy zastosowano empiryczne podejście (Nordest 2006,2007;Witczak i in. 2006; EURACHEM 2007; Kmiecik 2008; Kmiecik, Drzymała 2008; Kmiecik 2011) do oszacowania wartości niepewności całkowitej oraz jej składowych: niepewności geochemicznej, niepewności opróbowania i niepewności analitycznej. Dodatkowo zbadano wpływ metodyki poboru próbek na niepewność pomiaru. Do oceny niepewności wykorzystano wyniki analiz próbek normalnych i kontrolnych (dublowanych), pobranych w ramach monitoringu wód powierzchniowych Zlewni Górnej Odry oraz wód kopalnianych do niej odprowadzanych. Szacowanie niepewności całkowitej i jej komponentów pokazano na przykładzie wyników oznaczeń I– w próbkach normalnych i dublowanych. Określono wpływ rodzaju pojemnika na niepewność pomiaru. W tym celu zastosowano dwie procedury poboru próbek, obejmujące zastosowanie dwóch różnych pojemników na próbki. Analizę zawartości I– wykonano metodę ICP-MS w akredytowanym Laboratorium Hydrogeochemicznym. Każda z próbek poddana była dwukrotnej analizie. Do oszacowania wartości niepewności całkowitej i jej składowych zastosowano program ROBAN.
According to European Union present legal state (RDW2000; DWP 2006; DT 2009) surface and ground water quality monitoring should also include identification of all uncertainty associated with analytical procedure sources. Moreover, directives (DT 2009; RMOE 2011) indicate necessity of implementation the quality assurance and quality control program(QA/QC) of research in water monitoring. They also give the measurement uncertainty threshold value assesst basing on adequate norms of environment quality and is equal to 50% or less (k=2). In directive (RMŚ 2011) there are also defined reference methods, which should be use in water monitoring. In this paper the empirical approach for total uncertainty and its components (geochemical, sampling and analytical) assessment was used (Nordest 2006, 2007; Witczak et al. 2006; EURACHEM 2007; Kmiecik 2008; Kmiecik, Drzymała 2008; Kmiecik 2011). Moreover, the influence of sampling method on the measurement uncertainty was examined. For uncertainty estimation there were used results from analyses of normal and control (duplicate) samples, which were collected within monitoring of Upper Odra River Basin surface water and coalmine water inducted to it. The assessment of total uncertainty and its components was shown on the example of I- results delivered from normal and duplicate samples analyses. The influence of container type on measurement uncertainty was determined. For this aim two procedures of samples collecting were used, concerning two types of samples containers. The iodide analyses was performed using ICP-MS method in accredited Hydrogeochemical Laboratory Each sample was analysed twice. For total uncertainty and its components assessment the ROBAN program was applied.
Źródło:
Technika Poszukiwań Geologicznych; 2012, R. 51, nr 2, 2; 63-75
0304-520X
Pojawia się w:
Technika Poszukiwań Geologicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vliânie rabočikh organov potacionnogo kondicionera na kačestvo obrabotki i skorost obezvožiivaniâ kormowykh trav
Influence of working organs of the rotary conditioner on quality of processing and speed of the dehydration of fodder grasses
Autorzy:
Otroshko, Sergej A
Shevtsov, Aleksey V.
Kosolapov, Vladimir M.
Romaniuk, Wacław
Sharikov, Nikolay D.
Milev, Aleksandr D.
Powiązania:
https://bibliotekanauki.pl/articles/338460.pdf
Data publikacji:
2019
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
kosiarka tarczowa
kondycjoner
zielonka
sianokiszonka
siano
rośliny pastewne
rotary mower
disks
the conditioner
beaters
cereal-legume mixture
dehydration
samples
Opis:
W artykule przedstawiono opracowany w Instytucie im. V.R. Williamsa rotacyjny kondycjoner przystosowany do tarczowej kosiarki KR-2,1M. Jakość kosiarki z rotacyjnym kondycjonerem została oceniona zgodnie z GOST 28722-90. Charakterystyka skoszonej trawy została zbadana zgodnie z ogólnie przyjętymi metodami prowadzenia eksperymentów polowych. Test przeprowadzono na roślinach pastewnych i na trawie. Podczas badań sprawdzono jakość koszenia przez kosiarkę i oceniono jak koszenie wpłynęło na szybkość wysychania roślin. Oceniono, że rotacyjny kondycjoner jest funkcjonalny, ma prostą konstrukcję i wspomaga pracę kosiarki. Dodatkowo koszty jego produkcji są niskie.
Described developed in the Federal Williams Research Center of Forage Production & Agroecology rotary conditioner with beater working organs to mower КR-2,1М produced on the open jointstock company "Sasovkormmash". Jointed beaters, installed directly on disks of the mower, have a dynamic influence on the stems of plants during mowing. The mower with the developed conditioner is tested in field conditions on the cereal-legume mixture of 1st cut. The quality of the mower with a rotary conditioner was evaluated in accordance with GOST 28722-90. The characteristic of the mown grass was determined in accordance with the generally accepted methods of conducting field experiments with forage crops. mown grass. Data on the quality of processing of plants by experimental working organs and their influence on speed of a dehydration of plants are presented. It was established that the rotary conditioner is functional, has a simple design, low material consumption and, accordingly, cost.
Źródło:
Woda-Środowisko-Obszary Wiejskie; 2019, 19, 3; 25-32
1642-8145
Pojawia się w:
Woda-Środowisko-Obszary Wiejskie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie techniki półilościowej spektrometrii mas z indukcyjnie sprzężoną plazmą (SQ-ICP-MS) do oznaczania pierwiastków śladowych w próbkach środowiskowych
The use of semiquantitative technique of inductively coupled plasma mass spectrometry (SQ-ICP-MS) analysis in the study of trace elements concentration in environmental samples
Autorzy:
Krzciuk, K.
Powiązania:
https://bibliotekanauki.pl/articles/271154.pdf
Data publikacji:
2018
Wydawca:
Centralny Ośrodek Badawczo-Rozwojowy Aparatury Badawczej i Dydaktycznej, COBRABiD
Tematy:
SQ-ICP-MS
technika półilościowa
pierwiastki śladowe
metoda przesiewowa
próbki środowiskowe
semiquantitative technique
trace elements
screening method
environmental samples
Opis:
Oznaczenia pierwiastków śladowych z wykorzystaniem spektrometrii mas z plazmą wzbudzoną indukcyjnie (ICP-MS) są popularne w laboratoriach w kraju i za granicą. ICP-MS stanowi rutynową metodę w analizie różnych rodzajów próbek, a w tym próbek środowiskowych; rekomendowana jest w wielu przypadkach przez Amerykańską Agencję Ochrony Środowiska (EPA). Stwarza ona możliwość wykonania oznaczeń wielu pierwiastków jednocześnie z dużą dokładnością i precyzją, jednak wymaga podczas kalibracji użycia metody wzorca zewnętrznego. Gdy uzyskanie wysokiej dokładności pomiarów nie jest wymagane (np. w tzw. badaniach przesiewowych), możliwe jest wykorzystanie techniki półilościowej (ang. semiquantitative - SQ) ICP-MS. SQ-ICP-MS daje możliwość pominięcia etapu kalibracji z użyciem wzorców zawierających wszystkie oznaczane pierwiastki, przez co oszczędza się czas oraz odczynniki. Dokładność SQ-ICP-MS mieści się zwykle w przedziale 30-50%. Technika ta jest głównie wykorzystywana w sytuacjach, gdy niedostępny jest odpowiedni wzorzec kalibracyjny oraz w przypadkach analizy ciał stałych z użyciem ablacji laserowej. SQ-ICP-MS ma duży potencjał aplikacyjny w badaniach przesiewowych, jak np. poszukiwanie roślin akumulujących pierwiastki śladowe. Jej wykorzystanie w wielu przypadkach stanowi rozwiązanie bliższe ideom zielonej chemii analitycznej. Choć technika ta daje duże możliwości, nadal jest mało popularna, nawet wśród specjalistów. Niniejszy artykuł poświęcony jest ocenie tej techniki, wskazuje jej możliwości i ograniczenia, szczególnie w odniesieniu do analiz próbek środowiskowych.
Determination of trace elements by inductively coupled plasma mass spectrometry (ICP-MS) is a popular approach used in laboratories all over the world. ICP-MS is a routine method in analysis of different types of samples, including environmental samples and is recommended in many cases by the American Environmental Protection Agency (EPA). It provides the possibility of determining many elements at the same time with a good accuracy and precision, but requires the use of a calibration procedure using external standard calibration. If a high accuracy is not a priority (e.g. during screening tests), a semi-quantitative (SQ-ICP-MS) technique can be used. The SQ-ICP-MS does not require a complicated calibration protocol, which saves time and reagents. The accuracy of SQ-ICP-MS is usually in the range of 30-50%. The SQ-ICP-MS is applied if no calibration standards are available or during solid samples analysis with the use of laser ablation ICP-MS. Semi-quantitative technique has a high application potential in screening tests, such as searching for plants accumulating trace elements. SQ-ICP-MS meets criteria of technique recommended by the green analytical chemistry. Although the technique offers great opportunities, it is not very popular, even among specialists. This article is the critical review of the method, indicates its possibilities and limitations, especially in the context of environmental sample analysis.
Źródło:
Aparatura Badawcza i Dydaktyczna; 2018, 23, 2; 77-82
2392-1765
Pojawia się w:
Aparatura Badawcza i Dydaktyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the percentage of reinforcement by un-stressed rebar on the deformability of pre-stressed RC beams
Autorzy:
Blikharskyy, Yaroslav
Selejdak, Jacek
Bobalo, Taras
Khmil, Roman
Volynets, Myhailo
Powiązania:
https://bibliotekanauki.pl/articles/23965519.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
wzmocnienie
belka RC
próbki w rzeczywistym rozmiarze
wyniki eksperymentalne
pre-stressed
reinforcement
RC beam
real size samples
experimental results
Opis:
This article presents the materials of deformability studies of pre-stressed steel-concrete beams reinforced with a package of reinforcement with different ratio of tape and rebar in the pure bending moment zone. The aim of the research was determination of the reinforcement percentage influence, for pre-stressed reinforced concrete beams reinforced with a package of reinforcement on their deformability. Also, the aim was to evaluate the effectiveness of using pre-stressed rebar in combined reinforcement. The practical significance of the experimental research is to study the deformability in pre-stressed bending elements with external tape and rebar reinforcement, taking into account the influence of different ratios of reinforcement areas within the combined reinforcement and development of proposals for such structures` calculation and design. The scientific novelty of the research is in obtaining the deformability characteristics of reinforced concrete beams reinforced with a package of reinforcement (tape and steel bars with periodic profile) with different ratios in the case of static loads` action.
Źródło:
Production Engineering Archives; 2021, 27, 3; 212--216
2353-5156
2353-7779
Pojawia się w:
Production Engineering Archives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie teorii perkolacji do wyznaczania mocy wydzielanej na próbkach kompozytowych
Application of percolation theory for determination of power emitted on composite samples
Autorzy:
Frączak, P. S.
Czajkowski, A. A.
Powiązania:
https://bibliotekanauki.pl/articles/135872.pdf
Data publikacji:
2015
Wydawca:
Wyższa Szkoła Techniczno-Ekonomiczna w Szczecinie
Tematy:
prąd upływnościowy powierzchniowy
próbki kompozytowe
teoria perkolacji
moc pozorna
symulacja
MathCAD
surface leakage current
composite samples
percolation theory
apparent power
simulation
Opis:
Wstęp i cele: W pracy przedstawiono sposób analityczno-numeryczny wyznaczania wartości mocy wydzielanej na próbkach walcowych kompozytowych przez prąd upływnościowy powierzchniowy w ujęciu teorii perkolacji. W przyjętym modelu sformułowano w zapisie macierzowym prąd perkolacji, impedancję i moc wydzielaną na powierzchni próbek kompozytowych. Celem pracy było wyznaczenie wartości mocy traconej na powierzchni próbek kompozytowych. Materiał i metody: Podstawą opracowania była literatura dotycząca perkolacji. Badania starzeniowe oparto metodzie MGR (ang. Merry-Go-Round) dla próbek kompozytowych. Zastosowano metodę tak analityczno-numeryczną jak i doświadczalną. Wyniki opracowano numerycznie w programie MathCAD. Wyniki: W wyniku obliczeń analityczno-numerycznych uzyskano wartości mocy pozornej wydzielanej na powierzchni badanych próbek kompozytowych. Opracowano graficznie charakterystyki mocy pozornej. Wniosek: Podczas badania starzeniowego próbki kompozytowej metodą MGR, po osiągnięciu progu perkolacji następuje wzrost mocy pozornej wydzielanej na jej powierzchni.
Introduction: Analytical and numerical determination of power occurring on cylinder composite samples by surface leakage current in the aspect of percolation theory have been presented in the paper. In the given model the value of percolation current, impedance and power occurring on the samples have been defined in matrix notation. Some determinations of power in the aspect of percolation theory have been elaborated in the paper. The main aim of the paper is some determination of apparent power values on the surface of composite samples. Material and methods: The basis of the study was literature contained percolation theory. The study was based on aging method MGR (Merry-Go-Round) for composite samples. In the paper have been used not only the analytical and numerical but also some experimental method. The results have been numerically elaborated in the MathCAD program. Results: Using some analytical and numerical calculations have been obtained the values of apparent power emitted on the surface of the tested composite samples. The apparent power characteristics have been graphically elaborated in the study. Conclusion: During the senescence study of the composite sample by MGR method, after reaching the percolation threshold there is an increase apparent power emitted on its surface.
Źródło:
Problemy Nauk Stosowanych; 2015, 3; 107-116
2300-6110
Pojawia się w:
Problemy Nauk Stosowanych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prawdopodobieństwo przejścia i efektywna liczba próbek cyfrowego sygnału z multipleksacją OFDM
Transition probability and effective number of samples of a digital OFDM signal
Autorzy:
Rudziński, A.
Powiązania:
https://bibliotekanauki.pl/articles/317404.pdf
Data publikacji:
2012
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
przetwornik cyfrowo-analogowy
multipleksacja OFDM
prawdopodobieństwo przejścia
efektywna liczba próbek
digital-to-analog converter
OFDM
transition probability
effective number of samples
Opis:
W artykule przedstawiono wyprowadzenie wyrażenia opisującego efektywną liczbę próbek sygnału cyfrowego z multipleksacją OFDM. Wyprowadzenie oparte jest na obliczeniu prawdopodobieństwa przejścia dla tego sygnału. Otrzymane wyrażenie wskazuje wprost zależności między efektywną liczbą próbek a parametrami sygnału i stanowi uzupełnienie modelu teoretycznego.
This paper presents a derivation of the expression for the effective number of samples of a digital signal with OFDM coding. The derivation is based on the calculation of transition probability for the signal. The obtained expression explicitly reveals dependencies of the effective number of samples on parameters of the signal and supplements the theoretical model discussed previously.
Źródło:
Telekomunikacja i Techniki Informacyjne; 2012, 1-2; 58-66
1640-1549
1899-8933
Pojawia się w:
Telekomunikacja i Techniki Informacyjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ metod analiz na niepewność oznaczeń chlorowców w wodach powierzchniowych zlewni górnej Odry i w wodach kopalnianych do niej odprowadzanych
Influence of analyses method on uncertainty associated with halogens determination in Upper Odra River Basin surface water and coalmine water inducted to it
Autorzy:
Dwornik, M.
Kmiecik, E.
Bebek, M.
Powiązania:
https://bibliotekanauki.pl/articles/2075369.pdf
Data publikacji:
2015
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
niepewność pomiaru
kontrola duplikatów próbek
analiza wariancji
halogeny
jakość wody
measurement uncertainty
control duplicate samples
variance analyses
halogens
water quality
Opis:
In this paper the total uncertainty and its components (geochemical, sampling and analytical) were assessed with use of the empirical approach. For uncertainty estimation there were used results from analyses of normal and control (duplicate) samples, which were collected within monitoring of Upper Odra River Basin surface water and coalmine water inducted to it. Moreover, the influence of analyses method on the measurement uncertainty was examined. Results of ICP-MS, IC and titration methods were compared. The assessment of total uncertainty and its components was shown on the example of halogens (Cl −, Br − and I −) results delivered from normal and duplicate samples analyses.
Źródło:
Przegląd Geologiczny; 2015, 63, 10/1; 705--709
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Praktyczne zastosowanie metodyki FAA do przyklejania próbek kompozytowych, do testów kwalifikacji materiału
Practical application of FAA methodology of composite specimens used to material tests qualifications
Autorzy:
Jaśkiewicz, R.
Stepniowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/213356.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
preparatyka płyt kompozytowych
kompozyty polimerowe
dokument FAA
piaskowanie kompozytów
szlifowanie kompozytów
composities samples preparation
polimer composities
FAA document
composities sandblasting
composities grinding
Opis:
Artykuł ma na celu sprawdzenie praktycznego zastosowania metodyki FAA (Federalna Administracja Lotnictwa - Federal Aviation Administration) do przygotowania próbek kompozytowych, do testów kwalifikacji materiału. Dokonano przeglądu literaturowego na potrzeby weryfikacji postanowień FAA w aspekcie testów kwalifikacji materiału. Przedmiotem badanym była plyta kompozytowa wykonana z włókna węglowego, o wymiarach 30x56 cm oraz średniej grubości 3,187 mm. W artykule porównano stosowane dwie metody przygotowania powierzchni płyt kompozytowych do badań: piaskowanie i szlifowanie. W trakcie piaskowania zmiennymi parametrami był czas (30s, 40s i 50s), ciśnienie (3 bar i 3,5 bar) i rodzaj ścierniwa (mikrokulki szklane oraz mikrokulki ceramiczne). Pozwoliło to na weryflkację wpływu różnych wartości parametrów na jakość powierzchni piaskowanej, a takż porównać ją z obszarami szlifowanymi.
Test practical application of FAA (Federal Aviation Administration) methodology for composite samples preparation for material qualification testing was written in this article. Review of the literature was made to verify the FAA provisions in aspect of material qualification testing. Research has been done with a composite panel (30x56 cm, average thickness 3.187 mm). The article compares two methods used for composite panel surface preparation: sandblasting and grinding. During sandblasting tests, variable parameters was: time (30 s, 40 s and 50 s), pressure (3 bar and 3.5 bar), and the type of abrasive (glass microspheres and ceramic microspheres). This allowed to verify effects of various parameters on the quality of sandblasted surface, and to compare it with grinded areas.
Źródło:
Prace Instytutu Lotnictwa; 2016, 3 (244); 72-76
0509-6669
2300-5408
Pojawia się w:
Prace Instytutu Lotnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwości oceny zanieczyszczenia handlowego węgla kamiennego rtęcią na podstawie analiz próbek pokładowych
Possibilities of assessment of commercial hard coal contamination with mercury on the basis of analyses of seam coal samples
Autorzy:
Pyka, I.
Wierzchowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/167296.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
węgiel kamienny do celów energetycznych
próbki pokładowe
zawartość rtęci
prognozy emisji rtęci
steam hard coal
seam samples
mercury content
mercury emissions prognosis
Opis:
W artykule omówiono badania zawartości rtęci w próbkach pokładowych bruzdowych dokumentacyjnych oraz dwóch grupach produktów handlowych: sortymentach średnich i grubych łącznie (węgiel wzbogacony) oraz w sortymentach innych (węgiel głównie surowy – niewzbogacony). Przeprowadzono poróżniania w celu oceny czy wyniki oznaczeń zawartości rtęci w próbkach pokładowych bruzdowych dokumentacyjnych mogą być wykorzystane do prognozowania wyników zawartości rtęci w węglach handlowych, czyli do oceny zagrożeń środowiskowych (emisje) zużytkowania węgla, jako alternatywy dla bezpośrednich pomiarów emisji rtęci u użytkowników węgla. Możliwości te są ograniczone, a różnice między zawartością rtęci w próbkach bruzdowych dokumentacyjnych, a zawartością rtęci w produktach są nieco inne niż opisane w literaturze, np. dotyczące węgli amerykańskich. Badania są ograniczone do węgla kamiennego do celów energetycznych, wydobywanego w kopalniach Górnośląskiego Zagłębia Węglowego.
This paper presents the analyses of mercury content in samples taken from coal seams, so called seam channel samples, for documentary purposes in two groups of coal commercial products (sized coals): pea coals, nuts and cobbles analyzed together (constituting the cleaned coal) and all remaining sized coal products analyzed together (constituting raw coal or only partially cleaned). Comparisons were performed to assess whether the results of mercury content determinations for seam coal samples could be used for prognoses of the results of mercury content determinations for coal products and furthermore for the assessment of the environmental impacts (emission) of coal usage, as the alternative to direct mercury emissions measurements. One can conclude that such prognoses are limited and the differences between the results of determinations of mercury content in coal in seams and in products are different than those described in the literature, for example concerning US coals. The analyses are limited to the steam coal exploited in collieries located in the Upper Silesian Coal Basin.
Źródło:
Przegląd Górniczy; 2015, 71, 6; 50-56
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Micromechanical Properties and Stress Measurements with Diffraction Methods
Autorzy:
Gadalińska, E.
Baczmański, A.
Powiązania:
https://bibliotekanauki.pl/articles/97807.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
X-ray diffraction
stress measurements on riveted samples
duplex steel
composites
stress measurements during in-situ tensile test
stress concentarion tensor
necking phenomenon
Opis:
Diffraction methods are commonly used for the determination of the elastic lattice deformation and distortion from the displacement and broadening of the diffraction peak. These methods enable researchers to measure stresses and elastic properties of polycrystalline materials. The main advantages of diffraction methods are their non-destructive character and the possibility of macrostress and microstress analysis for multiphase and anisotropic materials. Measurements are performed selectively only for crystallites contributing to the measured diffraction peak, i.e. for the grains having lattice orientations for which the Bragg condition is satisfied. When several phases are present in the sample, measurements of separate diffraction peaks allow for the behaviour of each phase to be investigated independently. This method can be applied without any limitations to flat specimens. Numerical calculations of residual stresses around the rivets imply a very high stress gradientin the case of tangential stresses as well in the case of radial stresses. Attempting to verify these predictions, the residual stress measurements with an X-ray diffractometer were performed on riveted samples after the riveting process. In addition, complementary measurements of strain values with strain gauges during the riveting process were performed as well as the finite elements modelling. The aim of these measurements was to determine the stress values around the rivets and to compare results obtained with different techniques. On the other hand, the multi-scale crystallographic model of elastoplastic deformation is very convenient for the study of elastoplastic properties in microscopic and macroscopic scales. Comparison of experimental data with model predictions allows us to understand the physical phenomena that occur during a sample's deformation at the level of polycrystalline grains. Moreover, the micro and macro parameters of elastoplastic deformation can be experimentally established. It should be stated that the characterisation of the residual stress field and elastic properties is important in the study of the mechanical behaviour of polycrystalline materials, including plasticity and damage phenomena. In this work, a new analysis method of neutron diffraction results obtained during in-situ tensile load is proposed and tested. The methodology is based on the measurements of lattice strains during in-situ tensile testing for several hkl reflections and for different orientations of the sample with respect to the scattering vector. As the result, the full stress tensor for preferred texture orientations in function of the applied stress can be determined using the crystallite group method. The experimental data are presented and compared with the self-consistent model calculations performed for groups of grains selected by different hkl reflections.
Źródło:
Fatigue of Aircraft Structures; 2013, 5; 18-39
2081-7738
2300-7591
Pojawia się w:
Fatigue of Aircraft Structures
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
SB V 8754: Apostoloi, antapostoloi, and the Ptolemaic grain transport
Autorzy:
Balamoshev, Constantinos
Powiązania:
https://bibliotekanauki.pl/articles/1195407.pdf
Data publikacji:
2019
Wydawca:
Fundacja im. Rafała Taubenschlaga
Tematy:
Ptolemaic
first century bc
grain transport
samples
administration
archives
naukleros
dioiketes
sitologos
strategos
basilikos grammateus
apostoloi
antapostoloi
phylakitai
ship security guards
shipping
shipowners
corrections
Opis:
This paper offers new annotated readings and corrections to the original edition of P. Berlin inv. 16876 = SB V 8754 (from the archive of Har chebis, the royal scribe of the Herakleopolite nome), also discussing subsequent corrections proposed by various scholars in the past. Special attention is placed on the hapax legomenon technical term antapostoloi. The connection of these documents with the term apostoloi is investigated as well as their function within the framework of the shipping procedure and the officials involved in their issuance. Finally, appended is a transcription that reflects the current state of the papyrus, together with a translation into English.
Źródło:
The Journal of Juristic Papyrology; 2019, 49; 1-16
0075-4277
Pojawia się w:
The Journal of Juristic Papyrology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ poziomu wzbogacenia próbek żywności solami magnezu, wapnia, potasu i sodu na współczynnik odzysku wyznaczony metodą płomieniowej absorpcyjnej spektrometrii atomowej
The impact of the level of enrichment of food samples by salts of magnesium, calcium, potassium, and sodium for the recovery factor determined by the flame atomic absorption spectrometry
Autorzy:
Bajek, D.
Łęska, J.
Nowicki, D.
Kozłowski, C.
Powiązania:
https://bibliotekanauki.pl/articles/410301.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Humanistyczno-Przyrodniczy im. Jana Długosza w Częstochowie. Wydawnictwo Uczelniane
Tematy:
żywność
składnik mineralny
próbka wzbogacona
mineralizacja mikrofalowa
walidacja metody
food
mineral component of food
enriched samples
microwave mineralization
validation of analytical methods
Opis:
W artykule podjęto próbę określenia wpływu poziomu wzbogacenia próbek żywności na wartości współczynników odzysku substancji badanej. Na podstawie badań przeprowadzonych techniką FAAS na próbkach żywności należących do siedmiu różnych grup produktów spożywczych stwierdzono zależność pomiędzy rodzajem zastosowanej matrycy, wielkością naważki, poziomem wzbogacenia i warunkami mineralizacji, a wyznaczonymi wartościami współczynników odzysku. Średnie wartości współczynników odzysku wyznaczone dla analizowanych matryc były najbardziej zbliżone w przypadku wapnia, a najbardziej rozbieżne w przypadku sodu. Spośród analizowanych próbek żywności mięso surowe było matrycą, dla której średnie wartości współczynników odzysku wyznaczone dla wszystkich oznaczanych pierwiastków miały zbliżoną wartość. Z kolei najmniej wyrównanym poziomem średniej wartości odzysku charakteryzowało się mleko surowe.
The article attempts to identify the impact of the state of food samples, their complexity, size, and homogeneity of weighed amounts, the level of enrichment, as well as the conditions used for mineralization on the recovery coefficients of the test substance. The research conducted by the FAAS technique on samples of food belonging to seven different groups of food products showed a relationship between the type of matrix used, the size of the sample, the level of enrichment, and mineralization conditions and the designated recovery coefficients. Average values of the coefficients set for the recovery among analyzed matrices were most similar for calcium, and the most divergent in the case of sodium. Among the analyzed samples of food raw, meat was the matrix for which the average values of coefficients determined for the recovery of all elements had similar value. The lowest average balanced level of recovery was observed for raw milk.
Źródło:
Chemistry, Environment, Biotechnology; 2016, 19; 105-109
2083-7097
Pojawia się w:
Chemistry, Environment, Biotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wczesna reakcja epigeicznych kusakowatych (Coloeoptera, Staphylinidae) na wycięcie i zaoranie zrębu w borze sosnowym
Early effect of clear-cuts and their tilling on assemblages of epigeic rove beetles (Coloeoptera, Staphylinidae) in Pinus sylvetris stands
Autorzy:
Tamutis, V.
Skłodowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/989084.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Leśne
Tematy:
lesnictwo
bor sosnowy
zrab zupelny
orka
zmiany srodowiska
bioindykatory
kusakowate
Staphylinidae
zgrupowania zwierzat
dynamika zmian
ecological traits
lirter samples
indval analysis
prc analysis
Opis:
The studies were conducted on three plots, established in 100−130 year old Scots pine (Pinus sylvestris L.) stands (type: Pinetum vaccinio−mirtyllosum) situated in the southern and central parts of Lithuania (Kaunas and Vare˙na districts). Their canopy closure was from 0.6 to 0.8. The study areas comprised of a mature stand (control) and clear−cut felled in spring 2016 and tilled after 5 months. Altogether 30 litter samples (five per stand) were taken from randomly chosen locations twice: the first sampling took place one month after cutting (in May) and the other after five months (in October). In total, 921 adults and larvae representing 49 species of rove beetles (Coleoptera: Staphylinidae) were collected. The higher number of individuals was harvested in control stands (fig. 1a, tab. 1). The collected individuals were significantly more abundant during the second sampling in all studied stands (fig. 1b, tab. 1). In the same way the higher number of species was detected in control stands, but significant differences were observed only during the first sampling. Amount of forest species differed insignificantly between control stands and clear−cuts, while the rate of zoophagous species was significantly higher in control stands (fig. 2a, tab. 1). The number of mixophagous species was significantly higher in clear−cuts during the second sampling (fig. 2b−c, tab. 1). Both the felling and the tilling had a distinct impact on transformation of rove beetles assemblages in clear−cuts comparing to the mature stands (fig. 3). Ischnosoma splendidum, Othius subuliformis, Stenichnus scutellaris, Trimium brevicorne, Xantholinus tricolor, Philonthus cignatus and Sepedophilus sp. were revealed as associated with mature pine stands sites, while only Acrotona parens and Amischa analis were connected with clear−cuts (tab. 2). We propose to use these two species as indicators of strong transformation of rove beetles assemblages due to clearcutting and management. The results of the study proved that negative impact of clearcutting on number of individuals and number of forest species in rove beetles assemblages is distinct even in short period after cutting as well as that transformation of rove beetles assemblages increase after cutting of stand, especially after tilling.
Źródło:
Sylwan; 2017, 161, 06; 504-511
0039-7660
Pojawia się w:
Sylwan
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metodyka wyznaczania wybranych charakterystyk barwienia polietylenu z wykorzystaniem systemu CIELab
Methodology for determining selected characteristics of polyethylene dyeing using CIELab system
Autorzy:
Chorobiński, Mateusz
Skowroński, Łukasz
Bieliński, Marek
Powiązania:
https://bibliotekanauki.pl/articles/947562.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
pomiar koloru
barwienie tworzyw
mieszanie tworzyw
dozowanie tworzyw
metodyka przygotowania próbek
color measurements
coloring of polymers
mixing of polymers
dosage of polymers
methodology of samples preparation
Opis:
Przedstawiono oryginalną metodę przygotowywania barwnych próbek z polietylenu, wykorzystaną do oceny zmiany barwy w skali CIELab, w wyniku zmieszania wybranych barwników. Do weryfikacji i oceny zmienności barwy serii próbek PE z udziałem czterech pigmentów (R, G, B, Y) wykorzystano spektrofotometr Cary 5000 rejestrujący widma odbiciowe odzwierciedlające efekt wzajemnego mieszania stosowanych w badaniach koncentratów barwiących.
The paper presents the original method for the preparation of polyethylene samples used to assess the color change in the CIELab scale, by using a mixture of selected dyes. In order to verify and evaluate the color variability of a series of PE samples with four pigments (magenta, blue, green, yellow), the Cary 5000 spectrophotometer was used for recording reflectance spectra of individual samples demonstrating the effect of mutual mixing of the dyeing concentrates used in the study.
Źródło:
Polimery; 2019, 64, 10; 690-696
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hybrydowy algorytm wzajemnej entropii do oceny niezawodności systemów typu konfiguracja-redundancja
A hybrid cross-entropy algorithm for reliability assessment of confi guration-redundancy system
Autorzy:
Wang, G. B.
Huang, H. Z.
Sun, L. S.
Powiązania:
https://bibliotekanauki.pl/articles/301627.pdf
Data publikacji:
2009
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
ocena niezawodności
konfiguracja-redundancja
optymalizacja systemu
metoda wzajemnej entropii
generowanie próbek stochastycznych
reliability assessment
configuration-redundancy
system optimization
cross-entropy method
stochastic samples generating
Opis:
Stosowane w praktyce inżynieryjnej różnorakie redundancje zwiększają dostępność danego systemu zarazem powiększając jego złożoność, co czyni niepewnymi ocenę niezawodności i wykrywanie uszkodzeń komponentów systemu. Wobec powyższego, poddano badaniom system typu konfguracja-redundancja oraz sformułowano jego funkcję niezawodności. Kiedy niedostępna jest wiedza na temat poprzednich uszkodzeń komponentów systemu, problem uszkodzeń systemu ma charakter problemu stochastycznego. Tymczasem, aby wyeliminować niepewność systemu, konieczne jest wykrycie uszkodzeń w serii komponentów. Zaproponowano model przewidywanej najkrótszej ścieżki oraz model wykrywania uszkodzeń mające służyć optymalizacji niezawodności. Metodę wzajemnej entropii wykorzystano jako algorytm heurystyczny do oceny niezawodności systemu i wykrywania uszkodzeń komponentów. Zastosowane stochastyczne podejście do generowania próbek umożliwia otrzymanie ważnych próbek. W celu poprawienia wydajności obliczeniowej, stworzono hybrydowy algorytm wzajemnej entropii, który łączy w sobie stochastyczne podejście do generowania próbek i metodę wzajemnej entropii. Wyniki numeryczne wskazują na potencjalną poprawę alokacji niezawodności złożonych systemów, która prowadziłaby do jak najlepszego działania wszystkich komponentów systemu.
Engineering practices with various redundancies increase the availability of a system as well as complexity which bring the uncertainty of reliability estimation and failure detection of system components. Under such conditions, a confi gurationredundancy system is studied and the reliability function of the system is formulated. When no prior failure of system components is available, failure problem of system is a stochastic shortest path problem. Meanwhile to eliminate the uncertainty of system, it is necessary to detect failures series of components. The expected shortest path model and failure detecting model are proposed for system reliability optimization. The Cross-Entropy (CE) method is applied as a heuristic algorithm to estimate the system reliability and detect the failure of components. A stochastic sample generating approach is designed to obtain some valid samples. In order to improve the effi ciency of computing, a hybrid CE algorithm which combines the stochastic sample generating approach and the CE method is developed. Numerical results indicate potential improvements in reliability allocation of complex systems that would lead to the best performances of all system components.
Źródło:
Eksploatacja i Niezawodność; 2009, 3; 4-13
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of random vertical irregularities of railway tracks
Autorzy:
Podwórna, M.
Powiązania:
https://bibliotekanauki.pl/articles/264887.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
ballasted railway track
continuously welded track
random vertical irregularities
track irregularities modeling
track irregularities random samples
Monte-Carlo method
tor kolejowy
metoda Monte Carlo
modelowanie numeryczne
Opis:
The study presents state-of-the-art in analytical and numerical modelling of random vertical irregularities of continuously welded ballasted railway tracks. The common model of railway track irregularity vertical profiles is applied, in the form of a stationary and ergodic Gaussian process in space. Random samples of track irregularity vertical profiles are generated with the Monte-Carlo method. Based on the numerical metod developed in the study, the minimum and recommended sampling number required in the random analysis of railway bridges and number of frequency increments (harmonic components) in track irregularity vertical profiles simulation are determined. The lower and upper limits of wavelengths are determined based on the literature studies. The approach yields track irregularity random samples close to reality. The track irregularity model developed in the study can be used in the dynamic analysis of railway bridge / track structure / highspeed train systems.
Źródło:
International Journal of Applied Mechanics and Engineering; 2015, 20, 3; 647-655
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Chromatograficzne metody oznaczania parabenów w próbkach środowiskowych i kosmetykach. Cz. 2
Autorzy:
Kozarska, A.
Krzyżewska, I.
Powiązania:
https://bibliotekanauki.pl/articles/273853.pdf
Data publikacji:
2017
Wydawca:
Roble
Tematy:
wysokosprawna chromatografia cieczowa
HPLC
parabeny
kosmetyki
próbki środowiskowe
elektroforeza
chromatografia gazowa
GC
oznaczanie parabenów
high-performance liquid chromatography
parabens
cosmetics
environmental samples
electrophoresis
gas chromatography
parabens determination
Źródło:
LAB Laboratoria, Aparatura, Badania; 2017, 22, 2; 6-12
1427-5619
Pojawia się w:
LAB Laboratoria, Aparatura, Badania
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of Extensive Polish Handwritten Characters Database for Text Recognition Research
Autorzy:
Tokovarov, Mikhail
Kaczorowska, Monika
Miłosz, Marek
Powiązania:
https://bibliotekanauki.pl/articles/102832.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
OCR
Handwriting character samples
Database for optical character recognition
Polish handwritten characters database
Próbki znaków pisma ręcznego
Baza danych do optycznego rozpoznawania znaków
Baza polskich znaków pisanych odręcznie
Opis:
In the modern world, fast and efficient processing of non-digital (handwritten or typed) texts is the task of extreme importance. Similar to many other fields, optical character recognition (OCR) benefits from the application of machine learning (ML) which allows developing effective and accurate methods. In order to achieve good performance, a machine learning algorithm requires great amount of data. Nowadays, a large database of handwritten characters prepared by National Institute of Standards and Technology (NIST), USA, can be used for training an ML model. However, significant differences between the manners of handwriting exist in the US and Poland. That fact, along with the absence of Polish diacritical marks, causes the NIST database to be less useful for development of an OCR model for the Polish language. According to the best of the authors’ knowledge, no database with samples of Polish handwriting exists. The present research is focused at filling this gap, i.e. gathering and preparing an extensive database of Polish handwritten characters. The paper presents the very first database of Polish handwriting samples. The database is by far larger than all the datasets used in the previous attempts of implementing OCR for the Polish handwriting. It is also the first fully publicly accessible database of Polish handwriting of this scale. The same method and developed tools can be used to build handwritten characters databases of other languages.
Źródło:
Advances in Science and Technology. Research Journal; 2020, 14, 3; 30-38
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostyka laboratoryjna w toksykologii weterynaryjnej
Laboratory diagnostics in veterinary toxicology
Autorzy:
Niemczycka, Eliza Anna
Bracha, Urszula
Dubniewicz, Klaudia
Powiązania:
https://bibliotekanauki.pl/articles/22180021.pdf
Data publikacji:
2020
Wydawca:
Krajowa Izba Lekarsko-Weterynaryjna
Tematy:
toksykologia weterynaryjna
badania toksykologiczne
analiza toksykologiczna
substancje toksyczne
wykrywanie
diagnostyka laboratoryjna
chromatografia
chromatografia cienkowarstwowa
chromatografia gazowa
chromatografia cieczowa wysokosprawna
spektrofotometria
spektrometria atomowa absorpcyjna
próbki biologiczne
pobieranie próbek
zabezpieczenie próbek
metody badań
veterinary toxicology
laboratory methods
samples
Opis:
The aim of this article was to present laboratory methods used in veterinary toxicology together with the choice of material or specimen for analysis, securing the sample and procedure of preparing this chosen material for sending to laboratory with covered letter. Poisoned animals are an important group of veterinary patients. Finding of the cause of poisoning, gives not only an opportunity to apply targeted treatment. It significantly helps to prevent similar poisoning in the future, gives a confirmed diagnosis to the owner and becomes one more important clinical experience to veterinarian. Laboratory result may serve as an evidence in the court in a poisoning case also. Every step of choosing the material for analysis, then securing the sample, and preparing it for transportation, with properly constructed cover letter, to appropriate, preferably authorized laboratory, is extremely important to the reliable result of investigation.
Źródło:
Życie Weterynaryjne; 2020, 95, 12; 764-771
0137-6810
Pojawia się w:
Życie Weterynaryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
OGRANICZENIA STOSOWANIA TESTÓW STATYSTYCZNYCH
LIMITATIONS OF APPLICABILTY OF STATISTICAL HYPOTHESIS TESTING
Autorzy:
Domański, Czesław
Powiązania:
https://bibliotekanauki.pl/articles/453448.pdf
Data publikacji:
2015
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Katedra Ekonometrii i Statystyki
Tematy:
the Cox test
model statystyczny
idea Neymana-Pearsona
moc i rozmiar testu
test Coxa
testy dla prób nieprostych
a statistical model
the Neyman-Pearson idea
power and size of the test
tests for not simple samples
Opis:
Celem artykułu jest wskazanie ograniczenia stosowania testów statystycznych opartych na teorii Neymana-Pearsona. Najważniejszą cechą każdego testu jest jego moc, którą możemy zbadać, wtedy gdy jednoznacznie mamy sformułowaną zarówno hipotezę zerową, jak i hipotezę alternatywną. W artykule przedstawimy przykład takiego testu, dla którego określimy empiryczną moc i jego rozmiar.
The aim of this article is to show limits of applications of statistical tests based on the theory Neyman-Pearson. The most important feature of each test is its power, which we can examine if only we had formulated both the null hypothesis and the alternative hypothesis. In this paper we present an example of a test, for which we defined empirical power and size.
Źródło:
Metody Ilościowe w Badaniach Ekonomicznych; 2015, 16, 3; 18-25
2082-792X
Pojawia się w:
Metody Ilościowe w Badaniach Ekonomicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Krótki przegląd zastosowań cyklodekstryn dotyczący analiz farmaceutycznych, biomedycznych oraz środowiskowych
Short review of cyclodextrins applications in separation science focusing on pharmaceutical, biomedical and environmental analisys
Autorzy:
Lamparczyk, H.
Chmielewska, A.
Zarzycki, P. K.
Powiązania:
https://bibliotekanauki.pl/articles/92324.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Przyrodniczo-Humanistyczny w Siedlcach
Tematy:
cyklodekstryny
chromatografia gazowa
wysokosprawna chromatografia cieczowa
chromatografia cienkowarstwowa
zależność struktura-retencja
sterydy
próbki biologiczne i środowiskowe
efekty temperaturowe
kompleksy inkluzyjne
cyclodextrins
gas chromatography
high-performance liquid chromatography
thin-layer chromatography
structure-retention relationships
steroids
biological and environmental samples
temperature effects
inclusion complexes
Opis:
Przedstawiona praca jest ostatnim projektem naukowym nad jakim pracował Profesor Henryk Lamparczyk, który przedwcześnie zmarł 16 listopada 2012 roku w wieku 65 lat. Przeglądowa praca o charakterze dydaktyczno-poglądowym dotyczy zastosowania cyklodekstryn w bioanalityce i została napisana w oparciu o prace opublikowane przez Profesora i współpracowników. Niniejsza wersja bazuje na artykule pt. “Natural cyclodextrins: development in theory, chromatography and pharmacy, A. Chmielewska, H. Lamparczyk;” opublikowanej w materiałach Supramolecular Chemistry and Advanced Materials. Wojciech Macyk & Konrad Szaciłowski, Editors, Kraków Jagielonian University 2007, pages 131-136 i jest rozszerzona o wiadomości przedstawione w najnowszych publikacjach dotyczących zastosowania cyklodekstryn w HPLC, głównie do oznaczeń sterydów i analiz przesiewowych próbek środowiskowych.
This is the last research project of Professor Henryk Lamparczyk that prematurely passed away at age 65. In his intention it was to prepare a demonstrative review paper concerning application of cyclodextrins in bioanalysis, based on his and co-worker contributions to the field of supramolecular chemistry. This version of paper is based on the manuscript entitled “Natural cyclodextrins: development in theory, chromatography and pharmacy, A. Chmielewska, H. Lamparczyk;” that was published in Supramolecular Chemistry and Advanced Materials. Wojciech Macyk & Konrad Szaciłowski, Editors, Kraków Jagielonian University 2007, pages 131-136 and now is extended for the latest papers concerning HPLC application of cyclodextrins for steroids analysis and environmental samples screening. The main tools applied in described investigations were various chromatographic techniques such as gas chromatography (GC), high performance liquid chromatography (HPLC) and thin-layer chromatography (TLC). Topics such as structure-retention relationships, equilibrium constants between cyclodextrins (CDs) and guest molecules, thermodynamics and CDs separations were discussed. Additionally few examples of practical applications of CDs in pharmacy as well as biomedical and environmental analysis are given.
Źródło:
Camera Separatoria; 2013, 5, 1; 27-34
2083-6392
2299-6265
Pojawia się w:
Camera Separatoria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie wybranych innowacyjnych technik służących do izolacji i/lub wzbogacania pozostałości wybranych farmaceutyków w próbkach środowiskowych
Application of some innovative techniques for the isolation and enrichment of selected pharmaceutical residues in environmental samples
Autorzy:
Migowska, N.
Kumirska, J.
Powiązania:
https://bibliotekanauki.pl/articles/92374.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Przyrodniczo-Humanistyczny w Siedlcach
Tematy:
pozostałości farmaceutyków
próbki środowiskowe
techniki izolacji i wzbogacania
ekstrakcja z wykorzystaniem polimerów z odwzorowaniem cząsteczkowym
mikroekstrakcja do fazy stacjonarnej
ekstrakcja za pomocą ruchomego elementu sorpcyjnego
mikroekstrakcja poprzez membranę do fazy ciekłej
pharmaceutical residues
environmental samples
Molecularly Imprinted Solid-Phase Extraction
Solid-Phase Microextraction
Stir Bar Sorptive Extraction and Hollow-Fiber Liquid-Phase Microextraction
Opis:
Oznaczanie pozostałości farmaceutyków w próbkach środowiskowych jest zadaniem trudnym, ze względu na fakt, iż często stężenie zanieczyszczeń w próbce znacznie przewyższa stężenie szukanych związków. Postęp w dziedzinie technik izolacji i wzbogacania analitów, który nastąpił w przeciągu kilkunastu lat, sprawił, iż obecnie analityka dysponuje szeregiem technik, które mogą być wykorzystane do ekstrakcji wybranych związków. W pracy dokonano przeglądu zastosowań innowacyjnych metod ekstrakcji takich jak ekstrakcja z wykorzystaniem polimerów z odwzorowaniem cząsteczkowym, mikroekstrakcja do fazy stacjonarnej, ekstrakcja za pomocą ruchomego elementu sorpcyjnego oraz mikroekstrakcja poprzez membranę do fazy ciekłej do oznaczania pozostałości farmaceutyków w próbkach środowiskowych.
This paper focuses on the application of novel extraction techniques such as Molecularly Imprinted Solid-Phase Extraction, Solid-Phase Microextraction, Stir Bar Sorptive Extraction and Hollow-Fiber Liquid-Phase Microextraction used for isolation and enrichment of pharmaceutical residues in environmental samples. Determination of pharmaceutical residues in such complex matrix is a difficult task, due to the fact that the concentration of the matrix impurities are much higher than analytes. A great progress in extraction approaches, which has occurred within a few years, means that the analysts have a number of techniques that can be used for the extraction of selected compounds.
Źródło:
Camera Separatoria; 2012, 4, 1; 37-59
2083-6392
2299-6265
Pojawia się w:
Camera Separatoria
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-87 z 87

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies