Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Tin" wg kryterium: Temat


Tytuł:
Analiza NMT w postaci GRID i TIN na przykładzie danych z OKI
NMT (GRID/TIN) analysis - OKI data example
Autorzy:
Hejmanowska, B.
Powiązania:
https://bibliotekanauki.pl/articles/130062.pdf
Data publikacji:
2007
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
NMT
GRID
TIN
grid
Opis:
Przedmiotem prezentowanych analiz był numeryczny model terenu (NMT) w postaci regularnej i nieregularnej siatki (GRID i TIN - Triangulated Irregular Network). Do budowy NMT wykorzystano dane źródłowe zgromadzone w OKI (Ośrodek Koordynacyjno- Informacyjny przy Regionalnym Zarządzie Gospodarki Wodnej w Krakowie). Wykorzystując dane źródłowe tworzono model TIN, a następnie GRID wykorzystując oprogramowanie Terrain Analyst i aplikacje IT-GIS OKI. Następnie porównywano wyniki modelu GRID z wysokościami z danych źródłowych. Celem prac badawczych była analiza rozbieżności modelu GRID w zależności od wykorzystywanego algorytmu i od wielkości oczka siatki (3m, 2.5m, 2m, 1.5m i 1m). Na podstawie przeprowadzonych badan można sformułować wniosek, _e wyniki obu algorytmów różnią sie od siebie, a GRID wygenerowany za pomocą aplikacji IT-GIS OKI jest bardziej zgodny z wartościami wysokości w punktach pomiarowych w porównaniu z modelem GRID wygenerowanym za pomocą Terrain Analyst. Wzrost rozdzielczości powoduje generalnie zmniejszenie rozbieżności, ale jedynie dla 1 % punktów. Odchyłki w ponad 80% są poniżej +/- 10 cm, a ponad 99% różnic znajduje się w zakresie +/- 60 cm. Podsumowując można sformułować ogólny wniosek, że testowany NMT w postaci GRID o oczku 3m jest wystarczający dla modelowania stref zagrożenia powodziowego, przyjąwszy dokładność założona w specyfikacji technicznej OKI http://oki.krakow.rzgw.gov.pl/).
The subject of the analysis contained herein is the Digital Terrain Model (NMT) in a form of GRID and TIN. Initial data gathered in OKI (Coordination-Information Centre in Regional Water Management Office in Krakow) were applied to NMT generation. With the initial data, TIN was calculated and afterwards, GRID in Terrain Analyst and IT-GIS OKI application. Then, GRID was compared with the initial data. The main issue of the study was to analyse the discrepancy obtained from different algorithms, and with varying GRID resolution (3m, 2.5m, 2m, 1.5m i 1m). From the research made, it can be concluded that the two algorithms (Terrain Analyst and IT-GIS OKI) give different results. The accuracy of GRID generated with IT-GIS OKI application was higher than that obtained using the Terrain Analyst. The smaller the cell size in GRID, the better is the GRID accuracy, but the improvements appear only in 1% of points. There are more than 80% discrepancies below +/- 10 cm, and more than 99% discrepancies below +/- 60 cm. To summarise, it can be stated that GRID of 3 m cell size, generated using IT-GIS OKI application is accurate enough for flood area estimation, according to OKI technical specification (http://oki.krakow.rzgw.gov.pl/).
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2007, 17a; 281-289
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies on Cementation of Tin on Copper and Tin Stripping from Copper Substrate
Autorzy:
Rudnik, E.
Sikora, P.
Powiązania:
https://bibliotekanauki.pl/articles/352941.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tin
copper
cementation
stripping
Opis:
Cementation of tin on copper in acid chloride-thiourea solutions leads to the formation of porous layers with a thickness dependent on the immersion time. The process occurs via Sn(II)-Cu(I) mechanism. Chemical stripping of tin was carried out in alkaline and acid solutions in the presence of oxidizing agents. It resulted in the dissolution of metallic tin, but refractory Cu3Sn phase remained on the copper surface. Electrochemical tin stripping allows complete tin removal from the copper substrate, but porosity and complex phase composition of the tin coating do not allow monitoring the process in unambiguous way.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 2A; 593-598
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Surfactant Types on the Size of Tin Oxide Nanoparticles
Autorzy:
Boran, F.
Çetinkaya, S.
Şahin, M.
Powiązania:
https://bibliotekanauki.pl/articles/1031632.pdf
Data publikacji:
2017-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
nanoparticle
tin oxide
surfactant
Opis:
In this study, tin oxide (SnO₂) nanoparticles were synthesized by hydrothermal method in the presence of hydrazine and ammonia by adding surfactant for 12 h in a Teflon autoclave at 100°C reaction temperature. Tin(II) chloride hydrate as an inorganic precursor, hexadecyl trimethyl ammonium bromide (CTAB), and tetrapropyl ammonium bromide (TPAB) as cationic, and sodium dodecyl sulfonate (SDS) as anionic surfactants were used. The results showed that the size and shape of nanoparticles depended on the surfactant types. The nanoparticles sizes between 17.5 and 19.7 nm were obtained by changing types of surfactants. Synthesized tin oxide nanoparticles were characterized by field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and the Fourier transform infrared spectroscopy.
Źródło:
Acta Physica Polonica A; 2017, 132, 3; 546-548
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preliminary studies on hydrometallurgical tin recovery from waste of tin stripping of copper wires
Wstępne badania hydrometalurgicznego odzysku cyny z odpadów procesu odcynowania drutów miedzianych
Autorzy:
Rudnik, E.
Wincek, D.
Powiązania:
https://bibliotekanauki.pl/articles/263862.pdf
Data publikacji:
2017
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
electrolysis
leaching
tin
tin(IV) oxide
waste
elektroliza
ługowanie
cyna
cyna(IV)
odpady
Opis:
This paper presents the results of tin leaching and electrowinning from SnO2 waste originating from the industrial process of tin stripping of copper wires. The sludge was leached by acids (sulfuric, hydrochloric, tartaric, oxalic) and sodium hydroxide at various temperatures (40–80°C). The highest efficiency of tin leaching (12–18%) was obtained in an oxalic solution, while the lowest effectiveness (0.2–0.5%) was found for sulfuric acid. Tin leaching was accompanied by a transfer of copper residues to the solution. The electrowinning stage was realized under potentiostatic and galvanostatic conditions using oxalate solutions. Cyclic voltammetry was applied to select the potentials for the selective deposition of metals.
W artykule przedstawiono wyniki uzyskane w trakcie ługowania i elektrolitycznego odzysku cyny z odpadów SnO2 pochodzących z przemysłowego procesu usuwania cyny z drutów miedzianych. Szlam ługowano w roztworach kwasów (siarkowego, solnego, winowego, szczawiowego) i wodorotlenku sodu, w różnych temperaturach (40–80°C). Najwyższą skuteczność ługowania cyny (12–18%) otrzymano w roztworze szczawianowym, podczas gdy najniższą wydajność (0,2–0,5%) stwierdzono w przypadku kwasu siarkowego. Ługowaniu cyny towarzyszyło przejście pozostałości miedzi do roztworu. Elektrolityczny odzysk metali został zrealizowany w warunkach potencjostatycznych i galwanostatycznych z zastosowaniem roztworu szczawianowego. Warunki potencjałowe selektywnego osadzania metali wytypowano, opierając się na badaniach metodą woltamperometrii cyklicznej.
Źródło:
Metallurgy and Foundry Engineering; 2017, 43, 1; 7-20
1230-2325
2300-8377
Pojawia się w:
Metallurgy and Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ powłoki TiN na proces mikrowiercenia tworzyw sztucznych
Influence of TiN coating on microdrilling process of plastics
Autorzy:
Gołąbczak, Marcin
Gołąbczak, Andrzej
Matczak, Marek
Powiązania:
https://bibliotekanauki.pl/articles/404589.pdf
Data publikacji:
2019
Wydawca:
Wydawnictwo AWART
Tematy:
microdrilling
microdrill
TiN coating
plastic
machining quality
mikrowiertło
powłoka TiN
mikrowiercenie tworzyw sztucznych
Opis:
In this paper the results of research concerning comparative evaluation of wear and durability of microdrill blades with and without TiN coating, in the process of microdrilling of plastics, as well as the quality of made holes were presented. To evaluate the wear and durability of microdrills' blades, the index of blade corner wear, the measurement of axial cutting force and drilling length were used. The quality of drilled holes was evaluated on the basis of microscopic images of the edges of the holes on the entry and exit side of the drill. Significant differences were found in the effects of using the compared tools.
W artykule przedstawiono wyniki badań dotyczących porównawczej oceny zużycia i trwałości ostrza mikrowierteł z powłoką TiN oraz bez niej, w procesie mikrowiercenia tworzyw sztucznych, a także jakością wykonywanych otworów. Do oceny zużycia i trwałości ostrza mikrowierteł posłużono się wskaźnikiem zużycia naroża ostrza, pomiarem osiowej siły skrawania oraz długością wiercenia. Jakość wykonywanych otworów oceniano natomiast na podstawie obrazów mikroskopowych krawędzi otworów od strony wejścia i wyjścia wiertła. Stwierdzono wyraźne różnice w efektach stosowania porównywanych narzędzi.
Źródło:
Obróbka Metalu; 2019, 2; 16-19
2081-7002
Pojawia się w:
Obróbka Metalu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative Studies on the Codeposition of Antimony and Tin from Acidic Chloride and Sulfate-Chloride Solutions
Autorzy:
Rudnik, E.
Kostępski, M.
Powiązania:
https://bibliotekanauki.pl/articles/352105.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
antimony
electrolysis
speciation
tin
voltammetry
Opis:
Codeposition of antimony and tin from acidic chloride and chloride-sulfate baths was investigated. The calculations of distribution of species showed domination of neutral SnCl2 and anionic SbCl4 - complexes in chloride solution, while in the presence of sulfate ions neutral SnSO4 and cationic SbCl2+ complexes were found. Cyclic voltammetry, anodic stripping analysis and potentiostatic measurements showed that antimony deposited favorably and the reaction run under limiting control. Analysis of chronoamperometric curves suggested instantaneous nucleation of the solid phase in the chloride bath, but progressive model was more probable in the presence of sulfate ions.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 709-717
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical modeling of fracture during nanoindentation of the TiN coatings obtained with the PLD process
Autorzy:
Perzyński, K.
Madej, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/202038.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
crack
nanoindentation
nanolayers
TiN
XFEM
Opis:
In order to improve mechanical, frictional or biocompatibility behavior of well know materials like titanium (Ti) or titanium nitride (TiN) scientists are trying to develop new manufacturing and processing operations. One of those methods, that provide interesting results, is called deposition process. During deposition a material is upgraded with new surface layers that are characterized by specific required properties. These layers have usually different mechanical properties in comparison with a substrate material. A combination of different properties of the deposited layers can significantly change behavior of the structure under an exploitation condition. However, layers have usually nanometer scale, which causes problems with performing standard plastometric tests. One of the possibilities to solve this issue is an application of specially designed tests like nanoindentation. Nanoindentation can provide valuable information regarding mechanical and strength behavior of nanostructure components. These investigations are of importance to properly identify and design properties of the mentioned deposited materials. Unfortunately, experimental analyses at these scales are usually very expensive. That is why Authors decided to develop a numerical model of the nanoindentation test to investigate material behavior under loading conditions that can support experimental research. The overall aim of this research is development of a failure model, which can take into account morphology of microstructure of ceramic TiN layer deposited on the silicon substrate. Modeling of crack behavior was realized on the basis of the extended finite element method (XFEM).
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2013, 61, 4; 973-978
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Obserwacje zużycia powłok wielowarstwowych Ti/TiN w teście ball-on-disc
TEM observations of the wear of Ti/TiN multilayer coatings after Ball-on-disc test
Autorzy:
Major, Ł.
Morgiel, J.
Kot, M.
Rakowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/190428.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
powłoki wielowarstwowe
powłoki Ti/TiN
mikrostruktura
zużycie
multilayer coatings
Ti/TiN coatings
microstructure
wear
Opis:
Przedmiotem badań były procesy zużycia monowarstwowych powłok TiN oraz wielowarstwowych Ti/TiN po teście ball-on-disc nałożonych na podłoża stalowe. Powłoki wytworzone zostały techniką laserowej ablacji aktywowanej magnetronowo. Zużycie badano w testach kula Al2O3/tarcza przy obciążeniu 0,25N i 1N odpowiednio po 10000 i 2000 cykli. Obserwacje miejsc wytarcia przeprowadzono na przekrojach poprzecznych z wykorzystaniem transmisyjnej mikroskopii elektronowej (Tecnai G2 200 kV FEG). Do prowadzenia obserwacji wykorzystano techniki wysokorozdzielczej mikroskopii, jak również analizy składu chemicznego EDS. Cienkie folie do analizy TEM zostały wykonane techniką zogniskowanej wiązki jonów galu (Ga+), tzw. techniką FIB. Badania wykazały, że powłoki TiN w stanie po nałożeniu charakteryzowała silnie zdefektowana mikrostruktura kolumnowa oraz występowanie mikropęknięć wzdłuż granic międzyziarnowych. Obserwacje wczesnych stadiów zużycia, gdzie test na zużycie przeprowadzany był pod obciążeniem 0.25N, wykazały, że mikropęknięcia na granicach międzyziarnowych zwiększyły się, jak również powstały nowe, przecinające pojedyncze kolumny. Zużycie dokonywało się poprzez wykruszanie drobnych fragmentów pojedynczych ziarn. Pod większym obciążeniem (1N) następowała fragmentaryzacja powłoki. Jej kawałki wielkości kilku mikrometrów przesuwały się powodując powstanie uskoków na powierzchni powłoki i odpowiadające im odkształcenia podłoża. Wysokorozdzielcza mikroskopia transmisyjna wykazała, że pęknięcia ziarn przebiegały głównie wzdłuż płaszczyzn krystalograficznych typu {111} TiN. W przypadku powłok wielowarstwowych pod wpływem obciążenia dochodziło najpierw do pękania warstw ceramicznych, natomiast warstwy metaliczne ulegały odkształceniu plastycznemu. Pęknięcia te ponownie otwierają się w kolejnej warstwie ceramicznej (pod metaliczną), jednak ich wielkość jest już znacznie mniejsza. Zużycie monowarstwowych powłok ceramicznych następuje głównie w sposób katastroficzny, tj. poprzez gwałtowną delaminację dużych obszarów powłoki. Powłoki wielowarstwowe, poprzez zastosowanie naprzemianległych warstw ceramika/metal zużywają się równomiernie, tj. warstwa po warstwie.
The wear mechanisms of single- layered TiN coatings as well as multilayered Ti/TiN coatings (Λ =250nm) were investigated with ball-on-disc test. The coatings were obtained by the hybrid pulsed laser deposition (PLD) technique. The wear test was done using Al2O3 ball-on-disc test at 0.25 and 1N after 10000 and 2000 cycles, respectively. Thin foils for TEM observations were cut from the wear track using Quanta 200 3D FIB (Focus Ion Beam) equipped with an Omniprobe lift-up system. The microstructure investigations were performed with the TECNAI G2 SuperTWIN FEG (200kV) transmission electron microscope. Observations exhibited that the deposited TiN single layered coating was characterized by strongly defected columnar microstructure and the presence of micro-cracks along grain boundaries. Early stages of the wear process, where test was performed under 0.25N, showed that the micro-cracks at grain boundaries were much more pronounced and new ones additionally appeared cutting individual grains. The wear track formation starts with the removal of small pieces of individual grains leaving a "broken tooth" like line. The higher load (1N) resulted in activation of side slips along the existing cracks causing steps at the surface and corresponding dent in the substrate. Under the same loading in the central part of wear track, the TiN coating was fractured to a few micron size pieces, which were half way pushed into the steel substrate. The HRTEM observations of coating confirmed that the cracks formed during deposition were located at the column of crystallites boundaries, while wear caused the formation of intercrystalline cracks along {111} planes as well. In the case of multilayer coatings under the applied load, ceramic (TiN) layers were cracked while metallic layers deformed plastically. The vertical cracks in TiN were indeed stopped at the TiN/Ti interfaces, but reopen in TiN layers lying below. In applied wear conditions, the continuity of Ti layers prevails over cracking of the TiN layers and resulted in layer-by-layer wear of investigated multilayer coating.
Źródło:
Tribologia; 2009, 3; 115-123
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Budowa numerycznego modelu terenu dla celów związanych z liczeniem objętości
Creating of a digital terrain model for volume calculation needs
Autorzy:
Poniewiera, M.
Powiązania:
https://bibliotekanauki.pl/articles/113608.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
obliczanie objętości
Numeryczny Model Terenu
powierzchnia TIN
volume calculation
digital terrain model
TIN surface
Opis:
Artykuł zawiera przegląd stosowanych metod liczenia objętości zbiorników, hałd, wyrobisk górniczych itd. Podano w nim przykłady wykonania takich prac w programach Geolisp, AutoCAD Civil 3D i BricsCAD. Opisano generowanie numerycznego modelu terenu, eliminowanie błędów grubych, wprowadzanie linii nieciągłości i tworzenie powierzchni odniesienia. Wymieniono kilka dodatkowych zastosowań powierzchni objętościowej, takich jak: projektowanie filara ochronnego, wyznaczanie linii przecięcia spągu pokładu ze stropem karbonu itp. Podano zalecane parametry ekstrapolacji danych pomiarowych. Przedstawiono bezpłatne narzędzie MP-NMT służące do tworzenia i kontroli NMT, sporządzania izolinii, wykresów, obliczania objętości itp. Omówiono algorytm upraszczania dużej ilości danych.
The paper presents an overview of the methods used to calculate the volume of ponds, refuse piles, mine workings, etc. Examples of such work in Geolisp, AutoCAD Civil 3D and BricsCAD are provided. Paper describes generation process of the numerical terrain model, elimination of major errors, inputting of discontinuity lines and creation of the reference surfaces. A list of few additional applications of volumetric surface is provided, such as: designing a protective pillar, determining the intersection line between seam floor and carbon roof, etc. Paper presents recommended parameters for extrapolation of the measured data. A free MP-NMT tool is presented which is used for creating and controlling NTM, creating isolines, graphs, calculating volume, etc. An algorithm for simplifying large amounts of data is described.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2018, 7, 1; 470-483
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Projektowanie filara ochronnego szybu na podstawie modelu złoża
Designing of the shaft safety pillar based on numerical mineral deposit model
Autorzy:
Poniewiera, M.
Sokalla, K.
Wróbel, M.
Juzek, L.
Powiązania:
https://bibliotekanauki.pl/articles/113552.pdf
Data publikacji:
2016
Wydawca:
STE GROUP
Tematy:
filar ochronny
Numeryczny Model Złoża
powierzchnia TIN
safety pillar
Numerical Mineral Deposit Model
TIN surface
Opis:
W artykule przedstawiono możliwość wykorzystania Numerycznego Modelu Złoża do projektowania filara ochronnego dla szybu wentylacyjnego w przykładowym pokładzie węgla na podstawie danych z otworów.
The paper presents the possibility of use Numerical Deposit Model to design of the safety pillar for the ventilation shaft in an exemplary coal seam, based on the data from the boreholes.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2016, 1 (13); 178-189
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modification of TiN coatings by ion implantation
Autorzy:
Narojczyk, J.
Morozow, D.
Powiązania:
https://bibliotekanauki.pl/articles/386761.pdf
Data publikacji:
2017
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
ion implantation
TiN
silicon
HSS
turning
Opis:
The high-speed steel HS 6-5-2 cutting inserts coated with TiN were subjected to ion implantation with both silicon (dose 2x1017Si+ /cm2 ) and silicon with nitrogen ions (dose (1+1)x1017(Si+ + N+ )/cm2 ) on the subsurface layer of the rake face. Microhardness was examined before and after ion implantation. The composition and structural properties of the subsurface layer were examined by Glow Discharge Optical Emission Spectroscopy (GD-OES). The turning tests of 40H construction steel with the use of the cutting inserts implanted and non-implanted were performed. During the tests the two components of the net cutting force (the main cutting force Fc and feed force Ff) as well as the wear parameters VB on the major flankalong with the surface roughness (Ra) were measured. The implanted inserts exhibited higher durability compared to non-implanted ones.
Źródło:
Acta Mechanica et Automatica; 2017, 11, 3; 190-193
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sustainable development in the tinplate industry: refining tinplate leachate with cementation
Autorzy:
Klimko, Jakub
Urban, Kobialkova Ivana
Piroskova, Jana
Orac, Dusan
Havlik, Tomas
Klein, Dusan
Powiązania:
https://bibliotekanauki.pl/articles/1449632.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
tin sludge
recycling
hydrometallurgy
cementation
electrolysis
Opis:
Tin sludge produced during tin electroplating of steel sheet is an interesting secondary source of tin. Dried sludge usually contains more than 50% tin. Hydrometallurgical sludge treatment consists of several steps, including leaching in hydrochloric acid and electrolytic recovery of tin. The electrowinning process is negatively affected by the presence of impurities such as antimony and bismuth, which can cut overall current efficiency to 11% as well as reducing the quality of recovered tin. It is appropriate therefore to remove these impurities from the leachate before the electrowinning steps. This work studies the refining of leachate using cementation. The experiments were carried out at temperatures of 20, 40 and 60 °C at solid to liquid ratios of 1:60, 2:60, 3:60 and 4:60 using tin and iron dust as cementing metals. The leachates were mixed at a constant rate of 400 rpm during all cementation experiments. Effective removal of impurities was achieved in the case of iron powder cementation at s/l ratio 2:60 and temperature 20 °C. This cementation removed 98.49% bismuth and 99.14% antimony from the leachate solution. Electrolysis efficiency was increased from 11 to 71% after leachate refining. Antimony and bismuth were not detected in the final product obtained from refined electrolyte by means of electrolysis.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 1; 219-227
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania procesu mikrowiercenia w tworzywach kompozytowych
Studies of the microdrilling process of composite materials
Autorzy:
Gołąbczak, Marcin
Gołąbczak, Andrzej
Matczak, Marek
Powiązania:
https://bibliotekanauki.pl/articles/404463.pdf
Data publikacji:
2019
Wydawca:
Wydawnictwo AWART
Tematy:
composite microdrilling
TiN coating
tool wear
mikrowiercenie tworzyw sztucznych
powłoka TiN
intensywność zużycia ostrza
zużycie narzędzia
Opis:
W artykule przedstawiono wyniki badań dotyczących wpływu obecności powłoki TiN na ostrzach mikrowierteł w procesie mikrowiercenia tworzywa kompozytowego na ich zużycie i trwałość, a także na jakość wykonywanych otworów. Do oceny zużycia i trwałości ostrza mikrowierteł posłużono się wskaźnikiem zużycia naroża ostrza, pomiarem osiowej siły skrawania oraz sumaryczną długością wiercenia. Jakość wykonywanych otworów oceniano natomiast na podstawie obrazów mikroskopowych krawędzi otworów od strony wejścia i wyjścia wiertła. Stwierdzono wyraźne różnice w efektach stosowania porównywanych narzędzi.
In this paper the results of investigations concerning the influence of TiN coating on the edges of microdrills on their wear and durability, as well as on the quality of made holes in the process of microdrilling of composite material were presented. To evaluate the wear and durability of microdrills' edges, the index of edge corner wear, the measurement of axial cutting force and drilling length were used. The quality of drilled holes was evaluatedon the basis of microscopic images of the contour of holes on the entry and exit side of the drill. Significant differences were found in the effect of using the compared tools.
Źródło:
Obróbka Metalu; 2019, 3; 42-44
2081-7002
Pojawia się w:
Obróbka Metalu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Athrombogenic diffusive TiN surface layers aplication and evaluation in polish implantable rotary continous flow blood pump
Autorzy:
Gonsior, M.
Kustosz, R.
Gawlikowski, M.
Darlak, M.
Altyntsev, I.
Głowacki, M.
Wierzchoń, T.
Powiązania:
https://bibliotekanauki.pl/articles/284351.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
flow blood pump
surface layers
TiN layers
Źródło:
Engineering of Biomaterials; 2016, 19, 138; 100
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The application of CrN and TiN coatings in slide bearing kinematic coupling pin surface layer modification processes
Autorzy:
Lubas, J.
Powiązania:
https://bibliotekanauki.pl/articles/244165.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
TiN
CrN
wear
sliding friction
surface treatment
Opis:
This work presents the results of tribological stand tests of slide bearings with pins modified with CrN and TiN coatings and pins with a TiN-steel 46Cr2 and CrN-steel 46Cr2 ,,ring" structure. The ,,rin" structure samples features materials with different tribological properties in the form of rings on the pin slide surface. Such a structure is obtained when covering the 46Cr2 steel pin base with a discrete layer of TiN or CrN, using the PVD method. The stand tests of frictional couplings have been performed for the frictional kinematic coupling pin with modified surface layer and CuPb30 and AlSn20 alloy bearing liner slice. During the tests the tribological couplings were lubricated with Castrol magnatec engine oil (5W/40). The tests were performed on a T-05 tribological tester. The test results demonstrated the tribological advantageous using the "ring" structure samples in the frictional couplings. The tests demonstrated that the friction forces and the bearing material quantity wear were the least for couplings with CrN steel, 46Cr2 and nitrogen hardening, and the largest for TiN pin couplings. Modification of the CrN pin surface layer has a beneficial impact on reducing frictional resistance, and temperature reduction in the friction area as well as reduction in bearing alloy wear.
Źródło:
Journal of KONES; 2008, 15, 2; 263-267
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface modification ofaisi440b stainless steel and its influence on surgical drill bits performance
Autorzy:
Łępicka, M.
Grądzka-Dahlke, M.
Powiązania:
https://bibliotekanauki.pl/articles/350989.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
surgical drill bits
corrosion
wear
DLC
TiN
Opis:
The development of modern invasive surgery is highly dependent on the performance of surgical instruments, understood as long-term efficiency arising from high resistance to wear and corrosion. In order to maintain sufficient reliability, surgical cutting instruments are often made of martensitic stainless steels. Nevertheless, the use of ferrous alloys in medical applications is still a concern due to their questionable corrosion and wear resistance. To extend their bioconipatibility, improve stability in variable environmental conditions, improve ease of handling, and maximize their performance, diffusion layers and coatings are applied to the surface. The aim of this work was to evaluate the effect of TiN and diamond-like carbon (DLC) surface modification on the performance of surgical drill bits, that is. wear and corrosion resistance, measured in model and field tests. Based on the findings presented, DLC layers can be recommended as anti-wear and anti-corrosion coatings for surgical drill bits.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 3; 1417-1424
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure and properties of tin bronzes produced by the SPD method
Autorzy:
Sobota, J.
Rodak, K.
Nowak, M.
Powiązania:
https://bibliotekanauki.pl/articles/355126.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tin bronzes
KOBO
microstructure
mechanical properties
corrosion
Opis:
In this article the structural and mechanical properties of grain refinement of Cu-Sn alloys with tin content of 10%, 15% and 20% using the KOBO method have been presented. The direct extrusion by KOBO (name from the combination of the first two letters of the names of its inventors – A. Korbel and W. Bochniak) method employs, during the course of the whole process, a phenomenon of permanent change of strain travel, realized by a periodical, two-sided, plastic metal torsion. Moreover the aim of this work was to study corrosion resistance. The microstructure investigations were performed using an optical microscope Olimpus GX71, a scanning electron microscope (SEM) and a scanning transmission electron microscope (STEM). The mechanical properties were determined with INSTRON 4505/5500 machine. Corrosion tests were performed using «Autolab» set – potentiostat/galvanostat from EcoChemie B.V. with GPES software ver. 4.9. The obtained results showed possibility of KOBO deformation of Cu-Sn casting alloys. KOBO processing contributed to the refinement of grains and improved mechanical properties of the alloys. The addition of tin significantly improved the hardness. Meanwhile, with the increase of tin content the tensile strength and yield strength of alloys decrease gradually. Ductility is controlled by eutectoid composition and especially δ phase, because they initiate nucleation of void at the particle/matrix interface. No significant differences in the corrosion resistance between cast and KOBO processed materials were found.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 1; 95-102
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Statistical optimization of the synthesis of plant-derived fatty acid esters of TMP over homogeneous organometallic tin catalyst
Autorzy:
Nowicki, J.
Drabik, J.
Stańczyk, D.
Mosio-Mosiewski, J.
Woszczyński, P.
Powiązania:
https://bibliotekanauki.pl/articles/778507.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
tin catalyst
trimethylolpropane esters
statistical optimization
tribology
Opis:
A class of very important industrial-grade biolubricants was synthesized from plant-derived fatty acids (oleic and isostearic acid) by direct esterifi cation of trimethylolpropane according to novel effective and high selective method using Sn bis(2-ethylhexanoate) as catalyst. Model transesterifi cation reactions were performed with oleic and isostearic acids to optimize the reaction conditions to obtain maximum content of TMP triesters. Used specifi c homogeneous Sn catalyst allows to obtain TMP esters with very high content of triesters, above of 94 wt% without deep vacuum purifying distillation. Both TMP esters were evaluated for their physicochemical and tribological properties using ASTM standards. Both TMP esters exhibited high viscosity indexes and excellent low temperature properties.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 2; 61-70
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwości wykorzystania naziemnego skaningu laserowego w monitorowaniu deformacji w zakładach górniczych
Possibilities of terrestrial laser scanning method in monitoring of shape deformation in mining plants
Autorzy:
Kovanic, L.
Powiązania:
https://bibliotekanauki.pl/articles/318596.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
naziemny skaning laserowy
model TIN
monitorowanie kamiennego masywu
terrestrial laser scanning
TIN model
monitoring of the rockmassif
Opis:
Organizacja prowadzenia działalności górniczej wysunęła prośbę o przeprowadzenie geodezyjnego monitoringu podziemnych obszarów wydobycia w różnych zakresach celem określenia bezpieczeństwa kontynuowania wydobycia surowców. W referacie zaprezentowano możliwości naziemnego skaningu laserowego w przypadku określenia przemieszczeń i deformacji sztucznie wytworzonych obiektów jak również naturalnie lub górniczo wytworzonych kamiennych masywów. Celem jest określenie stopnia wiarygodności interpretacji zmiany w ich kształcie w odniesieniu do dokładności pomiarów i odległości urządzenia od obserwowanego obiektu. Niniejszy referat zawiera oceny pomiarów trzech obiektów o różnych charakterystykach – od laboratoryjnej po górniczą. Otrzymane wyniki przedstawiają średnie empiryczne błędy zastosowanej metody i przetwarzania danych wraz z szacunkiem minimalnie wykrywalnych zmian obiektów w przypadku wybranej metody wydobycia.
The organization conducting the mining activity placed the request to carry out the geodetic monitoring of the excavated underground areas of the various scope with the objective to assume the safety of the continuing operation of the raw materials extraction. The possibilities of the terrestrial laser scanning method exploitation when determining the displacement and deformation of artificially created objects and either naturally or by mining created rock massifs, are presented in this paper. The objective is to determine the reliability degree of the interpretation of the change in their shape with regard to the measurement accuracy and distance of the instrument from the observed object. This paper contains assessment of the measurements of three objects of different characteristics from laboratory one to the actual mining objects. Obtained results represent the empirical mean errors of the applied measuring method and processing the data with the estimate of the minimum detectable changes of the object in case of the selected method exploitation.
Źródło:
Inżynieria Mineralna; 2013, R. 14, nr 1, 1; 29-41
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parameter Characterization in Processing of Silver - Aluminum Based Electrical Contact Materials
Autorzy:
Praveen Kumar, S.
Parameshwaran, R.
Ananthi, A.
Jenil Jaba Sam, J.
Powiązania:
https://bibliotekanauki.pl/articles/352711.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electrical contactor
silver
aluminum
tin oxide
conduction
Opis:
An electrical contractor is one which plays significant role in day todays life in industries as well as in home appliances. In current scenario the materials for conducting purpose has an overwhelming research capability. Now a day the silver based electrical contact composite material have provided the potential applications in aerospace and automobile industries. Among silver based contact material the silver cadmium oxide and silver tin oxide plays a vital role in fabrication of electrical contactors. In this research an attempt has been made to study the influence of adding Aluminum with silver based electrical contact composite materials by two different processing routes namely stir-casting and powder metallurgy. Silver and aluminum matrix plays a virtual role in composite world owing to their highest conductivity. Optimum parameters were identified for attaining the maximum properties such as conductivity, hardness, density, and porosity of composition. By this better conducting property and mechanical property of the electrical contact can be improved by this system. Thus a screening test has be conducted with addition of Al with silver tin oxide compositions hence this paper aims to process the aluminum – silver based electrical contact materials by stir casting processing and powder metallurgy route and compare the results obtained.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 3; 1895-1901
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Portrety trumienne w kościele pw. Wniebowzięcia Najświętszej Maryi Panny w Skrzatuszu
Coffin portraits in the church of the Assumption of the Virgin Mary Blessed in Skrzatusz
Autorzy:
Fijałkowski, Marek
Powiązania:
https://bibliotekanauki.pl/articles/570893.pdf
Data publikacji:
2016
Wydawca:
Biblioteka Wyższego Seminarium Duchownego Diecezji Koszalińsko-Kołobrzeskiej
Tematy:
Skrzatusz
portret trumienny,
cyna
coffin portraits
tin
Opis:
Autor omawia kolekcję portretów trumiennych z kościoła w Skrzatuszu. Przedstawione obiekty pochodzą z XVII w. i stanowią największy zbiór konterfektów trumiennych w północnej Wielkopolsce.
The author describes the collection of coffin portraits from the church in Skrzatusz. The presented objects date from XVII century and they are the largest collection of coffin portraits in the northern Greater Poland.
Źródło:
Rocznik Skrzatuski; 2016, 4; 105-122
2300-8296
Pojawia się w:
Rocznik Skrzatuski
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thin SnO2 Films Manufactured Via the Sol-Gel and Electrospinning Methods
Autorzy:
Matysiak, W.
Tański, T.
Smok, W.
Polishchuk, O.
Powiązania:
https://bibliotekanauki.pl/articles/351688.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thin films
nanofibers
tin oxide
electrospinning
optical properties
Opis:
The aim of this work was to produce a thin SnO2 film by a technique combining the sol-gel method and electrospinning from a solution based on polyvinylpyrrolidone and a tin chloride pentahydrate as a precursor. The spinning solution was subjected to an electrospinning process, and then the obtained nanofiber mats were calcined for 10 h at 500°C. Then, the scanning electron microscopy morphology analysis and chemical composition analysis by X-ray microanalysis of the manufactured thin film was performed. It was shown that an amorphous-crystalline layer formed by the SnO2 nanofiber network was obtained. Based on the UV-Vis spectrum, the width of the energy gap of the obtained layer was determined.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 2; 761-765
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bioleaching of indium and tin from used LCD panels
Autorzy:
Willner, J.
Fornalczyk, A.
Gajda, B.
Saternus, M.
Powiązania:
https://bibliotekanauki.pl/articles/110195.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
bioleaching
ITO
indium recovery
tin recovery
LCD panels
Opis:
The demand for indium is increasing every year. This metal is mainly used as indium tin oxide (ITO) in the production of transparent conductive coatings for liquid crystal displays (LCD). This paper focuses on biohydrometallurgical methods used for the recovery of indium and tin from LCD sourced from spent mobile phones. Bioleaching experiments were carried out in two different leaching media: 9K medium and H2SO4 solution, using mixed, adapted bacteria Acidothiobacillus ferrooxidans and Acidothiobacillus thiooxidans. The main aim of this study was to evaluate the potential and efficiency of indium and tin extraction in the presence of acidophilic microorganisms. Within 35 days, using 9K medium, 55.6% of indium was bioleached, whereas the chemical leaching resulted in a value of 3.4%. Leaching efficiency of tin was 90.2% on the 14th day of the experiment for the biological system (9K) and 93.4% on 21st day of control leaching.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 639-645
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
LCD panels bioleaching with pure and mixed culture of Acidithiobacillus
Autorzy:
Willner, Joanna
Fornalczyk, Agnieszka
Saternus, Mariola
Sedlakova-Kadukova, Jana
Gajda, Bernadeta
Powiązania:
https://bibliotekanauki.pl/articles/2146845.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
bioleaching
aciditiooxidans
ITO
indium
tin
LCD panels
recovery
Opis:
The influence of pure and mixed culture of A. ferrooxidans and A. tiooxidans as well as different pulp density (1 and 2%) of LCD panels on the In and Sn bioleaching efficiency was investigated. Pulp density is one of the factors affecting the metals extraction efficiency during biological leaching. It has been shown that lower pulp density results in higher indium and tin dissolution. The A. ferrooxidans bioleaching system showed better metal extraction results than A. thiooxidans, especially for tin, indicating the special role of iron and A. ferrooxidans in tin recovery. The highest leaching rate of both indium (94.7%) and tin (98.2%) was obtained using iron and sulfur medium inoculated with mixed bacteria and a pulp density of 1% w/v.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 1; 15--23
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cyna i jej związki nieorganiczne : metoda oznaczania w powietrzu na stanowiskach pracy
Tin and its inorganic compounds : method of determining in workplace air
Autorzy:
Surgiewicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/137756.pdf
Data publikacji:
2016
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
cyna
związki cyny
metoda oznaczania
absorpcyjna spektrometria atomowa
narażenie zawodowe
tin
tin compounds
determination method
atomic absorption spectrometry
occupational exposure
Opis:
Cyna w temperaturze pokojowej jest miękkim, srebrzystoszarym metalem. W przemyśle cyna jest stosowana jako składnik stopów: łożyskowych, lutowniczych i odlewniczych oraz do wytwarzania powłok ochronnych naczyń cynowych i amalgamatów. Związki cyny są toksyczne. Wynikiem narażenia na cynę może być niekolagenowa pylica płuc – określana nazwą cynicy. Cyna i jej związki powodują podrażnienia skórne i przewlekłe zapalenie spojówek. Związki cyny kumulują się w organizmie. Wartość najwyższego dopuszczalnego stężenia (NDS) dla cyny i jej związków nieorganicznych została ustalona na poziomie 2 mg/m3. Celem pracy było opracowanie metody oznaczania stężeń cyny i jej związków nieorganicznych w powietrzu na stanowiskach pracy w zakresie od 1/10 do 2 wartości NDS zgodnie z wymaganiami zawartymi w normie europejskiej PN-EN 482:2012E. Opracowana metoda zastąpi metodę oznaczania cyny opisaną w normie PN-Z-04229-03:1996. Opracowana metoda oznaczania cyny i jej związków nieorganicznych polega na: pobraniu cyny i jej związków zawartych w powietrzu na filtr membranowy, mineralizacji filtra z zastosowaniem stężonego kwasu solnego i azotowego oraz oznaczaniu cyny w roztworze przygotowanym do analizy metodą płomieniową absorpcyjnej spektrometrii atomowej (AAS). Uzyskana krzywa kalibracyjna cyny w zakresie stężeń 5,00 ÷ 120,0 μg/ml charakteryzuje się wysoką wartością współczynnika korelacji (R2 = 1,0000) oraz odpowiada zakresowi stężeń 0,17 ÷ 4,17 mg/m3 cyny i jej związków w powietrzu dla próbki powietrza o objętości 720 l. Średnia wartość współczynnika wydajności mineralizacji wynosi 1,00. Metoda oznaczania cyny i jej związków nieorganicznych pozwala na oznaczanie najmniejszej ilości cyny i jej związków w powietrzu na stanowiskach pracy na poziomie 0,17 mg/m3. Charakteryzuje się dobrą dokładnością i precyzją, a także spełnia wymagania stawiane procedurom stosowanym do oznaczania czynników chemicznych w celu przeprowadzania oceny narażenia zawodowego. Opracowana metoda oznaczania cyny i jej związków nieorganicznych została zapisana w postaci procedury analitycznej, którą zamieszczono w załączniku.
Tin at room temperature is a soft, silvery metal. In the industry it is used as a component of bearing, brazing and casting alloys and for the preparation of protective coatings, dishes and tin amalgam. Tin compounds are toxic. The result of exposure to tin can be a non-collagenous pneumoconiosis referred to as the cynics. Tin and its compounds cause skin irritation and chronic conjunctivitis. Tin compounds accumulate in the body. Exposure limit value (NDS) for tin and inorganic compounds is 2 mg/m3. The aim of this study was to develop a method for determining concentrations of tin and its inorganic compounds in workplace air in the range from 1/10 to 2 NDS values, in accordance with the requirements of Standard No. PN-EN 482:2012E. The developed method replaces the method described in Standard No. PN Z-04229-03:1996. The method involves collecting tin and its compounds from the air on a membrane filter, filter mineralization with concentrated hydrochloric acid and nitric acid, and determining tin in the solution prepared for analysis with flame atomic absorption spectrometry (AAS). The calibration curve obtained in the concentration range 5.00 ÷ 120.0 μg/ml has a high correlation coefficient (R2 = 1.0000) and corresponds to the concentration range of 0.17 ÷ 4.17 mg/m3 for a 720-L air sample. The average value of the efficiency factor of mineralization was 1.00. The developed method for determining tin and its inorganic compounds enables determination of the smallest amount in workplace air at the level of 0.17 mg/m3. The method is accurate, precise and it meets the criteria for procedures for determining chemical agents used to evaluate occupational exposure. The developed method of determining tin and its inorganic compounds has been recorded as an analytical procedure (see appendix).
Źródło:
Podstawy i Metody Oceny Środowiska Pracy; 2016, 2 (88); 113-127
1231-868X
Pojawia się w:
Podstawy i Metody Oceny Środowiska Pracy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Properties of TiN protective coatings on steel
Autorzy:
Fornal, P.
Stanek, J.
Jaglarz, J.
Dąbrowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/148888.pdf
Data publikacji:
2003
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
Conversion Electron Mössbauer Spectroscopy
hard coating
oxidation
TiN
Opis:
The properties of fast cutting steel SW7M, stainless steel 1H18N9T, and tool steel NC11 coated with a TiN protective layer were studied using 57Fe Conversion Electron Mössbauer Spectroscopy. The adhesion of the coatings is determined by the thickness of Fe-N and Fe-Ti interface. The model of the abrasion of the protected tools, based on fast diffusion of Fe ions to the surface though the TiN layer and further oxidation is proposed.
Źródło:
Nukleonika; 2003, 48,suppl.1; 21-24
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oxidative pressurized acid leaching of waste printed circuit boards
Autorzy:
Lundstrom, M.
Seisko, S.
Jascisak, J.
Orac, D.
Aromaa, J.
Havlik, T.
Forsen, O.
Powiązania:
https://bibliotekanauki.pl/articles/109824.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
batch leaching
sulfuric acid
copper
tin
gas formation
Opis:
The amount of waste printed circuit board (WPCB) increases continuously. There is an economic and environmental need to recover valuable metals from WPCBs. In this study, the applicability of oxidative pressurized acid leaching of WPCBs rich in copper and tin was investigated. The effect of leaching parameters such as temperature, partial oxygen pressure and chloride concentration on metal dissolution from WPCBs was studied in sulfuric acid media. It was shown that non-metallic elements present in WPCBs initiated gas formation, namely CO2 and CO, during oxidized pressure acid leach. Decomposition of plastic components already started at 90 °C with 1.5 MPa oxygen overpressure in the presence of 1 g/dm3 chlorides. Gas formation was shown to have a negative impact on the process since copper extraction was reduced to 27% compared to 80-90% extraction achieved from anode slimes used as a reference material. It was suggested that gas formation related to plastic components could have a severe impact on metal yields. The highest dissolution of tin equal to 36% was achieved at room temperature. It was found that higher temperature promoted tin hydrolysis.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 781-792
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Non-wetting to Wetting Transition Temperatures of Liquid Tin on Surfaces of Different Steel Samples Corresponding to their Spontaneous Deoxidation
Autorzy:
Varanasi, D.
Aldawoudi, K. E
Baumli, P.
Koncz-Horvath, D.
Kaptay, G.
Powiązania:
https://bibliotekanauki.pl/articles/2049712.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wetting transition
deoxidation
contact angles
steels
liquid tin
Opis:
The goal of this paper is to measure the non-wetting to wetting transition temperatures of liquid tin on surfaces of different steel samples in vacuum with residual pressure of 10-8 bar. The experiments were conducted on four steels (C45, S103, CK60 and EN1.4034) of varying compositions using pure tin (99.99%) by the sessile drop method. Non-wetting to wetting transition (contact angle decreasing below 90°) by liquid tin was observed as function of increasing temperature in the range of 820-940 K for low alloyed steels C45, S103 and CK60, while it was considerably higher (around 1130 K) for high chromium EN1.4034 steel. it is concluded that at about the same temperatures, the surfaces of the steel samples are spontaneously deoxidized due to the combined effect of high temperature, low vacuum and C-content of steels. After the oxide layer is removed, the contact angles of liquid tin on steel surfaces were found in the range of 45-80° for low alloyed C45, S103 and CK60 steels and around 20° for high chromium EN1.4034 steel. These relatively high contact angle values compared to other metal/metal couples (such as liquid Cu on steels) are due to the formation of not fully metallic intermetallic compounds (FeSn and FeSn2) at the interface (such do not form in the Cu/Fe system).
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 2; 469-476
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microscale interpretation of tribological phenomena in Ti/TiN soft-hard multilayer coatings on soft austenite steel substrates
Autorzy:
Lackner, J.
Major, L.
Kot, M.
Powiązania:
https://bibliotekanauki.pl/articles/200127.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ti/TiN multilayer coating
magnetron sputtering
wear
TEM
Opis:
The mechanical and tribological behavior of physical vapor deposited coatings on soft substrate materials gains increasing interest due to economical and environmental aspects – e.g. substitution of steels by light-weight metals or polymers in transport vehicles. Nevertheless, such soft materials require surface protection against wear in tribological contacts. Single layer hard coatings deposited at room temperature are brittle with a relatively poor adhesion. Therefore, they should be better substituted by tough multilayer coatings of soft-hard material combinations. However, the mechanics of such multilayer coatings with several 10 nm thick bilayer periods is difficult and yet not well described. The presented work tries to fill the gap of knowledge by focusing both on mechanical investigations of hardness, adhesion, and wear and on microscopic elucidation of deformation mechanisms. In the paper 1 ěm thick Ti/TiN multilayer stacks were deposited by magnetron sputtering on soft austenitic steel substrates at room temperature to prevent distortion of functional components in future applications. High hardness was found for 8 and 16 bilayer films with modulation ratio Ti:TiN = 1:2 and 1:4. This was attributed (with use of transmission electron microscopy) to stopping the crack propagation in thin Ti layers of the multilayer systems by shear deformation combined with different fracture mechanisms in comparison with that for the TiN single layers (edge cracks at the border of the contact area and ring cracks outside, respectively).
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2011, 59, 3; 343-355
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aproksymacja powierzchni terenu na podstawie danych lotniczego skaningu laserowego z wykorzystaniem modelu aktywnych powierzchni
Airborne laser scanning data-based approximation of terrain surface using the active surface model
Autorzy:
Borkowski, A.
Jóźków, G.
Powiązania:
https://bibliotekanauki.pl/articles/130806.pdf
Data publikacji:
2008
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
płatki
NMT
TIN
GRID
interpolacja
flakes
DTM
grid
interpolation
Opis:
Model aktywnej powierzchni (flakes) otrzymuje się w wyniku rozwiązania zadania wariacyjnego, w którym minimalizowana jest energia całkowita powierzchni, Energia ta opisuje zarówno właściwości geometryczne modelowanej powierzchni jak i właściwości oraz strukturę danych pomiarowych. Model flakes wykorzystywano dotychczas w procesie filtracji danych skaningu laserowego. W niniejszej pracy model ten zastosowano zarówno do filtracji błędów grubych jak i do interpolacji numerycznego modelu terenu (NMT). Otrzymany NMT porównano z modelem otrzymanym w wyniku interpolacji z wykorzystaniem oprogramowania komercyjnego ImageStation. Wykorzystując model aktywnej powierzchni wyinterpolowano NMT na regularnej siatce (GRID) o boku 1 m. Zbiór punktów terenu powstały w wyniku filtracji posłużył do utworzenia, z wykorzystaniem ImageStation, modelu GRID z węzłami ściśle odpowiadającymi węzłom NMT. Modele zbudowano dla terenu rolniczo-leśnego o powierzchni około 1.5 km². W około 1.5*10⁶ węzłach siatki obliczono różnice wysokości pomiędzy obydwoma modelami. Średnia różnica wysokości pomiędzy modelami wynosi -0.05 m, a błąd średni różnic wysokości wynosi 0.34 m. Największe rozbieżności pomiędzy modelami zaobserwowano dla terenów leśnych. Dla pozostałych terenów różnice wysokości pomiędzy modelami są znikome. Przeprowadzony eksperyment numeryczny pokazał, że model flaks może być z powodzeniem zastosowany zarówno do filtracji danych skaningu laserowego jak i do interpolacji NMT na podstawie tych danych.
The active surface model (the flakes model) is determined by solving a variation problem in which the total energy of the surface is minimized: Etot = Eint + Eext → min. The internal energy, Eint describes geometrical properties of the modelled surface and is defined as the weighted sum of membrane kernel z²x + z²y and thin plate kernel z²xx + 2z²xy + z²yy : Eint = α/2 z²x + z²y + β/2 (z²xx + 2z²xy + z²yy). The weighting parameters α and β are chosen arbitrarily, the choice depending on implementation and geometrical properties (smoothness) of the modelled surface. The external energy Eint depends on the data. Depending on the implementation, the external energy may be described in different ways. So far, the active surface model has been used in research on filtration of airborne laser scanning data. The filtration is based on elimination of points (laser beam reflections) which do not belong to the terrain surface. The numerical tests performed confirmed the correctness of the method of airborne laser scanning data filtering presented. The filtration was correct in more than 90%. In this work, the active surface model was used both for filtering out gross errors and for interpolating the digital terrain model (DTM). The DTM obtained was compared to the DTM built with the commercial software ImageStation. In the active surface model application, a 1 m GRID DTM was interpolated. The filtering process produced a set of terrain points. The set was entered in the ImageStation to build a DTM of irregular TIN type. The software used allowed to transform this DTM to a regular GRID format. The GRID model was generated strictly in the same nodes to which the first DTM (interpolated using the active surface model) was interpolated. The models were developed for a rural-forested area of about 1.5 km². Differences between the DTMs built using the flakes model and the ImageStation were calculated for about of 1.5•10⁶ GRID nodes. The altitude differences ranged from -2.72 to 3.31 m. The mean difference between the models was -0.05 m, the RMS of the differences amounting to 0.34 m. The largest discrepancies between the DTMs were identified in the forested part of the area, particularly where there were few terrain points. In the rural part of the area, the altitude differences between the models were small.
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2008, 18a; 21-29
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza rzeźby brzegu na podstawie numerycznego modelu terenu
Digital terrain model-based coast relief analysis
Autorzy:
Terefenko, P.
Furmańczyk, K.
Łapiński, M.
Powiązania:
https://bibliotekanauki.pl/articles/131062.pdf
Data publikacji:
2008
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
brzeg
bezpieczeństwo
rzeźba
NMT
TIN
coast
safety
relief
DEM
Opis:
Strefa brzegowa morza to bardzo ważny gospodarczo i społecznie obszar wzajemnej interakcji pomiędzy trzema żywiołami: lądem, morzem i atmosferą a obecnością i działalnością ludzką. Od wieków człowiek obserwuje i bada wybrzeże w celu przewidzenia jego zmiennej natury i ujarzmienia jej. Ochrona brzegu morskiego zmierza przede wszystkim do powstrzymania i usuwania skutków niszczącej działalności morza. Aby działania takie mogły przynieść pożądany skutek niezbędna jest wiedza o miejscu występowania najbardziej wrażliwych i narażonych części brzegu. W tym celu przeprowadzono analizę rzeźby dla pasa technicznego Urzędu Morskiego w Szczecinie z wykorzystaniem numerycznego modelu terenu. Numeryczny model terenu z uwagi na duże możliwości jakie daje informatyka stał się istotnym elementem w modelowaniu różnorodnych zjawisk przestrzennych w systemach GIS. W niniejszym opracowaniu model utworzony na podstawie mapy zasadniczej z roku 2002 w skali 1:2000 był podstawą do przeprowadzenia analiz i w rezultacie pozwolił na stworzenie klasyfikacji morfologicznej badanego terenu i jego ocenę pod kątem zagrożeń od strony morza. Niniejsze badania mogą służyć jako podstawa do bardziej złożonych analiz zmian rzeźby brzegu morskiego z uwzględnieniem dodatkowych parametrów takich jak tempo erozji i akumulacji oraz wzrost poziomu morza.
The coastal zone of the sea is an economically and socially important area of interaction between three basic elements: the land, the sea and the atmosphere; it is also affected by human activities. Coastal processes have been for ages investigated to forecast, restrain, and tame their nature. Coastal defence systems are mostly designated to stop or mitigate destructive effects of the sea. Such activities can succeed only if there is sufficient knowledge on the most sensitive and fragile parts of the coast. To identify such areas, a coast strip managed by the Szczecin Maritime Office was analysed with a digital terrain model. Due to its large technical potential, the digital terrain model (DTM) has become a very important tool in modelling of a variety of spatial phenomenon within GIS systems. In this work, a TIN model developed from a 1:2000 map of a technical strip belt for 2002 was used to analyse the morphology of the Polish coast. The analysis allowed to distinguish several morphological classes; in addition, coastal safety classes were identified. The results should be analysed in a wider context taking into account additional variables such as erosion and accumulation rates or the mean sea level rise.
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2008, 18b; 581-588
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nanostructured wear-resistant coatings based on refractory metals nitrides: physical-mechanical propertiesand structural-phase state
Autorzy:
Panda, Anton
Dyadyura, Konstiantyn
Hovorun, Tatyana
Pylypenko, Oleksandr
Dunaeva, Marina
Pandová, Iveta
Powiązania:
https://bibliotekanauki.pl/articles/407251.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanocomposite coatings
friction
wear
hardness
multilayered TiN/ZrN coating
Opis:
Results of scientific researches show the trend of active using nitrides and borides of transition metals and their combination in developing protective materials. While single elements nitrides have been well studied, their multilayer modifications and combinations require more detailed study. Physical-mechanical properties and structural-phase state of multilayer coating according to the deposition conditions is an important task for the study. It will be the analysis of physical-mechanical and electrical properties of coatings based on refractory metals nitrides, their structure and phase composition and surface morphology depending on the parameters of condensation. It was established the structure and behavior of nano scale coatings based on refractory metals nitrides (Ti, Zr) depending on the size of nano grains, texture, stress occurring in coatings.
Źródło:
Management and Production Engineering Review; 2019, 10, 4; 133-139
2080-8208
2082-1344
Pojawia się w:
Management and Production Engineering Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Digital image correlation of coated and uncoated Religa Heart_Ext ventricular assist device
Autorzy:
Kopernik, M.
Gawlikowski, M.
Milenin, A.
Altyntsev, I.
Kustosz, R.
Kąc, S.
Powiązania:
https://bibliotekanauki.pl/articles/307138.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
komorowe wspomaganie pracy serca
VAD
korelacja obrazów
DIC
azotek tytanu
Tin
złoto
ventricular assist device
digital image correlation
titanium nitride
TiN
gold
Opis:
The digital image correlation is used to estimate influence of deposited heamocompatible coatings (gold and titanium nitride) on mechanical response of ventricular assist device Religa Heart_Ext made of Bionate II (thermoplastic polycarbonate urethane) under working conditions by comparison of the coated Religa Heart_Ext with uncoated Religa Heart_Ext. The DIC is applied for experimental investigation of the strains and displacements distribution on external surface of the blood chamber of ventricular assist device during loading. The experiment was conducted in a hydraulic system with water at operating temperatures of 25 and 37 °C, as well as under static pressures: 80, 120, 180, 220 and 280 mmHg, and static underpressures: –25, –45, –75 mmHg. The subsequent images were taken after stabilization of pressure on a set level. The applied research method shows that the nano-coating of 30 nm in thickness significantly affects deformation of the blood chamber of Religa Heart_Ext in macro scale. The proposed composition of coatings increases strain on external surface of the ventricular assist device.
Źródło:
Acta of Bioengineering and Biomechanics; 2015, 17, 4; 49-58
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Duplex type coatings from Ti-Si-N system applied on WC cutting plates
Powłoki typu "duplex" z układu Ti-Si-N zastosowane na płytkach frezarskich z WC
Autorzy:
Mania, R.
Morgiel, J.
Grzonka, J.
Zimowski, S.
Dąbrowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/256735.pdf
Data publikacji:
2006
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
powłoka duplex
warstwa TiN/Si3N4
płytka skrawająca WC
duplex coating
TiN/Si3N4 layer
WC cutting plate
Opis:
The observations of microstructure as well as the results of work test of duplex type coated WC cutting plates are presented. The buffer hard TiN layer was deposited using PUSK-83 Arc system, while the ultra-hard composite TiN/Si3N4 layer was deposited using WM-50 planar magnetron system equipped with the TiSi4% at. target. The transmission electron microscopy observations indicated that the buffer layer is a columnar, relatively coarse crystalline, while the top layer is characterised also by columnar microstructure but of much finer crystallites. It was confirmed that buffer layer is filling up WC cracks and other surface roughness presenting much better deposition condition for the ultra-hard top layer. The work test showed that duplex coating extends the plates life by 60%. Additionally, the cutting plates' lifetime was correlated with their hardness.
W pracy przedstawiono wyniki badań eksploatacyjnych płytek frezarskich TPKN 1603PPR SM 25T/P25 wykonanych z węglików spiekanych pokrytych powłoką typu "duplex" złożoną z twardej warstwy buforowej TiN oraz ultratwardej krystaliczno-amorficznej TiN/Si3N4. Warstwa buforowa TiN nanoszona była metodą łukową na stanowisku PUSK-83, a warstwę wierzchnią TiN/Si3N4 naniesiono z użyciem magnetronu planarnego WM-50 ze specjalnym targetem wykonanym ze spieku TiSi4% at. Badania mikrostruktury powłok z użyciem mikroskopu transmisyjnego wykazały, że warstwa buforowa ma znacznie bardziej grubokrystaliczną budowę w stosunku do kompozytowej warstwy wierzchniej. Równocześnie zastosowanie warstwy buforowej TiN prowadzi do wypełnienia pęknięć i zagłębień na powierzchni płytek oraz wygładzenia powierzchni pod warstwę TiN/Si3N4. Płytki z powłoką "duplex" porównywano z takimi samymi pokrytymi jedynie tzw. warstwą buforową TiN, jak też z płytkami bez pokrycia. Potwierdzono istnienie korelacji pomiędzy trwałością ostrzy badanych płytek a twardością naniesionej warstwy oraz możliwość wydłużenia czasu pracy płytek z powłokami typu "duplex" o 60%.
Źródło:
Problemy Eksploatacji; 2006, 4; 81-90
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Whisker growth in Tin alloys on glass-epoxy laminate studied by scanning ion microscopy and energy-dispersive X-ray spectroscopy
Badanie wzrostu wiskerów w stopach cyny na laminacie szklano-epoksydowym z użyciem skaningowej mikroskopii jonowej i dyspersyjnej spektroskopii rentgenowskiej
Autorzy:
Czerwiński, A.
Skwarek, A.
Płuska, M.
Ratajczak, J.
Witek, K.
Powiązania:
https://bibliotekanauki.pl/articles/354392.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tin whiskers
tin-rich lead-free solders
intermetallic compounds (IMCs)
wiskery cynowe
bezołowiowy stop lutowniczy o wysokiej zawartości cyny
związki międzymetaliczne (IMC)
Opis:
Tin-rich solders are widely applied in the electronic industry in the majority of modern printed circuit boards (PCBs). Because the use of lead-tin solders has been banned in the European Union since 2006, the problem of the bridging of adjacent conductors due to tin whisker growth (limited before by the addition of Pb) has been reborn. In this study tin alloys soldered on glass-epoxy laminate (typically used for PCBs) are considered. Scanning ion microscopy with Focused Ion Beam (FIB) system and energy-dispersive X-ray spectroscopy (EDXS) were used to determine correlations between spatial non-uniformities of the glass-epoxy laminate, the distribution of intermetallic compounds and whisker growth.
Bezołowiowe stopy lutownicze o wysokiej zawartości cyny są szeroko stosowane w przemyśle elektronicznym we współczesnych obwodach drukowanych (PCB). Stosowanie ołowiu w tych stopach jest od 2006 roku zakazane w Unii Europejskiej, co odnowiło problem wzrostu wiskerów cynowych poprzednio ograniczonego dodatkiem Pb. Wiskery zagrażają niezawodności układów elektronicznych, m.in. z powodu wprowadzanych zwarć. Praca dotyczy wzrostu wiskerów na powierzchni lutów naniesionych na najczęściej stosowany laminat szklano-epoksydowy. W oparciu o wyniki skaningowej mikroskopii jonowej (wykorzystujacej zogniskowana wiązkę jonów) i spektroskopii dyspersji energii promieniowania rentgenowskiego określono związek pomiędzy przestrzennymi niejednorodnościami laminatu szklano-epoksydowego, rozkładu wytrąceń międzymetalicznych i wzrostu wiskerów.
Źródło:
Archives of Metallurgy and Materials; 2013, 58, 2; 413-417
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wetting transparency of graphene deposited on copper in contact with liquid tin
Autorzy:
Sobczak, N.
Sobczak, J. J.
Kudyba, A.
Homa, M.
Bruzda, G.
Grobelny, M.
Kalisz, M.
Strobl, K.
Singhal, R.
Monville, M.
Powiązania:
https://bibliotekanauki.pl/articles/391530.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Odlewnictwa
Tematy:
graphene
liquid tin
sessile drop
wetting transparency
liquophilic
liquophobic
Opis:
Wetting behavior of liquid Sn (99.99%) on graphenecoated Cu substrate was investigated by the sessile drop method using two testing procedures: 1) classical contact heating (CH) of a couple of materials; 2) capillary purification (CP) allowing non-contact heating accompanied with squeezing the Sn droplet through a hole in an alumina capillary. The tests were performed in vacuum (p < 1.80 × 10-6 mbar) at 360 °C for 300 s. The images of Sn/substrate couples were recorded by high-resolution high-speed CCD camera. The results of this study evidenced that graphene layer is transparent for liquid Sn and after 300 s interaction, it forms the contact angles (θ) similar to those on pure Cu substrates, both in CH (θ = 59°) and CP (θ = 32°) tests. However, with liquid Sn, apparently the same effect of graphene wetting transparency is more complicated than that with water and it is caused by different mechanism, most probably, accompanied with reconstruction of the graphene layer.
Źródło:
Prace Instytutu Odlewnictwa; 2014, T. 54, nr 3, 3; 3-11
1899-2439
Pojawia się w:
Prace Instytutu Odlewnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ modyfikacji powierzchni TiN metodą litografii na aktywność biologiczną komórek
The effects of TiN modification by lithography on cells behavior
Autorzy:
Zajączkowska, A.
Brudek, M.
Bierła, J.
Borowski, T.
Lappalainen, R.
Wierzchoń, T.
Czarnowska, E.
Powiązania:
https://bibliotekanauki.pl/articles/284347.pdf
Data publikacji:
2009
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
biomateriały
TiN
metoda litografii
modyfikacja powierzchni
biomaterials
lithography
modification
Źródło:
Engineering of Biomaterials; 2009, 12, no. 89-91; 52-54
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of a Novel Silver-Based Electrical Contact Composites and Assessment of Its Mechanical and Electrical Properties
Autorzy:
Kumar, Praveen S.
Senthil, S. M.
Parameshwaran, Rathinasamy
Rathanasamy, Rajasekar
Powiązania:
https://bibliotekanauki.pl/articles/2049131.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
silver tin oxide
electrical contact
composites
tungsten oxide
conductivity
Opis:
The electrical contactors play a crucial role in closing the circuit in many power distribution components like overhead lines, underground cables, circuit breakers, transformers, and control systems. The failure in these components mainly occurs due to the break-down of contactors due to the continuous opening and closing action of contacts. Silver (Ag)-based oxide contact materials are widely used in practice, among which silver tin oxide (AgSnO2) is most common. An attempt is made in increasing the performance of AgSnO2, by adding Tungsten Oxide (WO3) in various weight proportions, thus finding the optimal proportion of AgSnO2WO3 to have increased mechanical and electrical performances. All the composite samples are fabricated in-house using powder metallurgy process. The assessment of physical and electrical properties namely, density, hardness, porosity, and electrical conductivity, showed that 90%Ag-8.5%SnO2-1.5%WO3 composite yielded superior results. With help of morphological tests, wear characteristics are also investigated, which showed that 90%Ag-8.5%SnO2-1.5%WO2 composite has a wear coefficient of 0.000227 and a coefficient of friction of 0.174 at an optimized load of 10 N and sliding velocity of 0.5 mm/s.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 4; 1087-1094
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electrical Characteristics of Tin Oxide Films Grown by Thermal Atomic Layer Deposition
Autorzy:
Yoon, Seong Yu
Choi, Byung Joon
Powiązania:
https://bibliotekanauki.pl/articles/352926.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
atomic layer deposition
tin oxide
electrical property
oxygen adsorption
Opis:
Tin dioxide (SnO2 ) is an n-type semiconductor and has useful characteristics of high transmittance, excellent electrical properties, and chemical stability. Accordingly, it is widely used in a variety of fields, such as a gas sensor, photocatalyst, optoelectronics, and solar cell. In this study, SnO2 films are deposited by thermal atomic layer deposition (ALD) at 180°C using Tetrakis(dimethylamino)tin and water. A couple of 5.9, 7.4 and 10.1nm-thick SnO2 films are grown on SiO2 /Si substrate and then each film is annealed at 400°C in oxygen atmosphere. Current transport of SnO2 films are analyzed by measuring current – voltage characteristics from room temperature to 150°C. It is concluded that electrical property of SnO2 film is concurrently affected by its semiconducting nature and oxidative adsorption on the surface.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 3; 1041-1044
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of electrical resistivity, residual stress and surface roughness of sputtering indium tin oxide films with different thicknesses
Autorzy:
Tien, Chuen-Lin
Lin, Tsai-Wei
Su, Shu-Hui
Powiązania:
https://bibliotekanauki.pl/articles/2033888.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
indium tin oxide
magnetron sputtering
residual stress
surface roughness
Opis:
This paper investigates the influence of film thickness on the electrical and mechanical properties of transparent indium tin oxide (ITO) thin films. Two groups of ITO thin films deposited on unheated substrates were prepared by the radio-frequency magnetron sputtering technique. The biaxial residual stress and surface roughness for two groups of ITO thin films were measured by a Twyman–Green interferometer and a Linnik microscopic interferometer, respectively. The electrical resistivity of the ITO films was measured by a four-point probe apparatus, the thickness was determined mechanically with a profilometer. The measurement results show that the average resistivity of ITO thin films decreases with increasing the deposited thickness. The compressive residual stress in the ITO thin films decreases with increasing the deposited thickness. We also find that an anisotropic stress in the two groups of ITO films is more compressive in a certain direction. The RMS surface roughness in the two groups of ITO films is less than 1 nm.
Źródło:
Optica Applicata; 2021, 51, 4; 499-512
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Porównanie działania algorytmów aktywnego modelu TIN i predykcji liniowej do segmentacji punktów terenowych
Comparison of TIN active model and prediction of linear algorithms for terrain points segmentation
Autorzy:
Brodowska, P.
Powiązania:
https://bibliotekanauki.pl/articles/130626.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
LIDAR
ALS
chmura punktów
algorytm aktywnego modelu TIN
predykcja liniowa
filtracja
segmentacja
lidar
point cloud
active TIN model algorithm
linear prediction
filtration
segmentation
Opis:
Istotną część punktów pozyskanych z wykorzystaniem technologii lotniczego skaningu laserowego stanowią odbicia od obiektów leżących ponad powierzchnią terenu np. drzew, krzewów czy budynków. Jednoznaczna i dokładna segmentacja jest kluczowym procesem pozwalającym na identyfikację obszarów homologicznych pod względem określonych własności w zbiorze punktów, co z kolei umożliwia generowanie NMT czy modelowanie brył budynków. W niniejszej pracy przedstawiono porównanie dwóch najczęściej stosowanych algorytmów filtracji chmury punktów ALS: aktywnego modelu TIN oraz predykcji liniowej. Badania wykonano dla wyodrębnionych 24 pól testowych charakteryzujących się różnym ukształtowaniem i użytkowaniem terenu. Weryfikacja wyników automatycznych filtracji polegała na ich porównaniu ze zbiorami referencyjnymi. W wyniku tego porównania określono względne procentowe błędy segmentacji punktów terenowych, które kształtowały się na poziomie od 0% do około 20% i zależne były od charakteru badanej powierzchni oraz obiektów na niej występujących. Przeprowadzone testy potwierdziły wysoką skuteczność obydwu badanych algorytmów, pokazując jednocześnie ich pewne ograniczenia i różnice w przypadku filtracji terenów o skomplikowanym ukształtowaniu lub pokryciu. Oba algorytmy zwracają podobny wynik w przypadku klasyfikacji chmury punktów opisujących tereny wykorzystywane rolniczo oraz tereny, na których zlokalizowane są pojedyncze budynki, krzewy i drzewa oraz parkingi z samochodami. Metoda oparta na predykcji liniowej lepiej eliminuje punkty zarejestrowane w wyniku odbicia wiązki lasera od podjazdów/wiaduktów/mostów, niż algorytm aktywnego modelu TIN.
A significant part of the data points obtained by using airborne laser scanning technology come from points reflected from objects situated above the ground such as trees, shrubs or buildings. Clear-cut and accurate segmentation is a crucial stage in data processing which allows to identify the homologous regions in terms of specific properties within a dataset of points, which further allows to generate DTM's or model building shapes. This paper shows an analysis of the two most commonly used algorithms for ALS point cloud filtering: active TIN model and linear prediction. The study was performed on 24 specifically extracted testing samples characterized by different topography and land use. The verification of the results of the automatic filtration process of both algorithms was based on comparison to reference datasets. As a result of this comparisons the relative percentage errors of automatic segmentation were determined. The level of the estimated errors varies from 0% to around 20% and depends on the characteristics of the land and the objects which are on the surface. The conducted study confirmed the high efficiency of both evaluated algorithms, at the same time revealing their limitations and differences in the filtration process for areas of a complex topography or terrain coverage. Both algorithms provide similar classification of point clouds describing land use for agriculture, areas on which a single building, shrub or tree is located, and for used car parks. Method based on linear prediction works better than active algorithm TIN model in terms of points recorded by the laser beam being reflected from vehicles/flyovers/bridges.
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2012, 24; 63-71
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fluorine-Doped SnO2 Thin Films in Solar Cell Applications. Morphological, Optical and Electrical Properties
Autorzy:
Lisnic, Petru
Hrostea, Laura
Leontie, Liviu
Girtan, Mihaela
Powiązania:
https://bibliotekanauki.pl/articles/27313873.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
fluorine tin oxide
FTO
thin films
spray pyrolysis
solar cells
Opis:
This study examines the optimal parameters for obtaining fluorine-doped SnO2 (FTO) films with promising potential for photovoltaic applications. Due to its properties, tin oxide is used in a wide range of technologies, among which the manufacture of solar cells is one of the most important. Being doped with fluorine, tin dioxide becomes a good transparent and conductive electrode, suitable for solar cell applications. The chemical stability and low cost of the doped SnO2 makes it an advantageous alternative to tin-doped indium oxide (ITO). Among the most important characteristics of FTO thin films are high photoconductivity under sunlight irradiation and strong UV absorption. The SnO2 compound, doped with fluorine, exhibits a considerable chemical and physical stability, good electrical conductivity and high transmission (over 85%) in the visible range. The spray pyrolysis technique is the most preferable and efficient deposition method of fluorine-doped SnO2 thin films. This work aims to identify the optimal parameters for the spray pyrolysis of SnO2:F films and to analyze the morphology, transparency and strength of as obtained films in relation to the doping amount in the precursor solution, spraying distance and film thickness.
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 2; 483--490
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The content of lead, cadmium, arsenic, mercury and tin in fruit and their products based on monitoring studies – exposure assessment
Autorzy:
Mania, M.
Rebeniak, M.
Chabros, E.
Orshulyak, O.
Postupolski, J.
Powiązania:
https://bibliotekanauki.pl/articles/2082840.pdf
Data publikacji:
2021
Wydawca:
Narodowy Instytut Zdrowia Publicznego. Państwowy Zakład Higieny
Tematy:
food
fruit
monitoring
lead
cadmium
mercury
arsenic
tin
exposure assessment
Opis:
Background. Fruit and fruit products are important part of our daily diet. In addition to the ingredients necessary for the proper functioning of the body, these products can also be a source of intake elements harmful to human health. Objective. Analysis of the results of monitoring studies conducted in Poland in 2015 concerning contamination of lead (Pb), cadmium (Cd), arsenic (As), mercury (Hg) and tin (Sn) in fruit and fruit products and exposure assessment. Material and methods. Approximately 600 samples of fresh, frozen, dried fruits, fruit preserves and canned fruits were tested. The laboratories of State Sanitary Inspection were involved in testing. Accredited and validated analytical methods were used. The test samples were prepared in accordance with the standard PN-EN 13804:2013. The contents of lead, cadmium and tin were determined by using flame atomic absorption spectrometry (FAAS) or flameless with electrothermal atomization spectrometry (GFAAS); arsenic by using hydride generation atomic absorption spectrometry method (HGAAS) and mercury the "cold vapor" atomic absorption spectrometry (CVAAS) method. Results. Contamination of investigated samples with elements harmful to human health (Pb, Ca, As, Hg and Sn does not rise concern to human health and was in most cases comparable with contamination reported in other European Union countries. The estimated average exposure of adults and children to lead intake with fruit and fruit products ranged from 0.5% to 14.6% of the respective Benchmark Dose Lower Confidence Limit (BMDL) established by the European Food Safety Authority (EFSA). The mean intake of cadmium with these groups of foodstuffs was in the range 0.3 - 8.5% of the TWI value (Tolerable Weekly Intake) established by EFSA for adults and children (0.1 - 3.6% of the PTMI (Provisional Tolerable Monthly Intake) established by JECFA. In case of arsenic mean intake was in the range 0.5 - 1.6% BMDL whilst for mercury (inorganic form) intake represented 0.5 - 1.4% of TWI value established by JECFA and then confirmed by EFSA. Conclusions. Based on the obtained results, it was found that content of Pb, Cd, As, Hg and Sn in the tested samples of fruit and their products does not pose a risk to consumer health. Estimated exposure of consumers does not exceed tolerable doses established by EFSA and JECFA for these elements.
Źródło:
Roczniki Państwowego Zakładu Higieny; 2021, 72, 4; 353-360
0035-7715
Pojawia się w:
Roczniki Państwowego Zakładu Higieny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Potential-Current Conditions on the Electrodeposition of Ni-Sn Alloys from Acidic Chloride-Sulphate Solution
Wpływ warunków potencjałowo-prądowych na współosadzanie stopów Ni-Sn z kwaśnego roztworu chlorkowo-siarczanowego
Autorzy:
Rudnik, E.
Włoch, G.
Czarnecka, A.
Powiązania:
https://bibliotekanauki.pl/articles/352011.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electrodeposition
nickel
tin
alloy
speciation
elektroliza
nikiel
cyna
stop
specjacja
Opis:
Ni - Sn alloys were electrodeposited from acidic chloride-sulphate solution in potentiostatic and galvanostatic conditions. Cyclic voltammetry and Hull cell were used for the selection of the appropriate deposition potentials and cathodic current densities, respectively. In the potentiostatic conditions (-1.0 - -1.2 V vs. Ag/AgCl) porous deposits (~7-10 wt% Ni) were obtained, while dense coatings (~15-34 wt% Ni) were produced in the galvanostatic conditions (0.5-1.5 A/dm2). In both cases, deposits consisted of β - Sn and Ni3Sn4 phases. Speciation of the bath was also calculated.
Stopy Ni - Sn osadzano katodowo z kwaśnego roztworu chlorkowo-siarczanowego w warunkach potencjostatycznych i galwanostatycznych. Warunki elektrolizy wytypowano na podstawie pomiarów chronowoltamperometrycznych i testów w komórce Hulla. W warunkach potenjostatycznych (-1.0- -1.2 V wzgl. Ag/AgCl) otrzymano warstwy porowate (7-10%mas Ni), natomiast w warunkach galwanostatycznych (0.5-1.5 A/dm2) tworzyły się warstewki zwarte (15-34%mas Ni). We wszystkich przypadkach uzyskano dwufazowe osady katodowe zawierające (β-Sn i Ni3Sn4. Obliczono także rozkład form jonowych w stosowanej kąpieli.
Źródło:
Archives of Metallurgy and Materials; 2014, 59, 1; 195-198
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Some problems of plasma-material interactions in fusion devices
Autorzy:
Glazunov, G.
Volkov, E.
Lapshin, V.
Tereshin, V.
Sadowski, M.
Langner, J.
Stanisławski, J.
Powiązania:
https://bibliotekanauki.pl/articles/146712.pdf
Data publikacji:
2000
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
boron-carbide erosion
plasma-material interaction
TiN-coated stainless-steel
Opis:
The paper concerns some questions connected with the interaction of high-temperature plasma-ion fluxes with solid materials inside experimental chambers used for fusion-oriented research, and particularly inside the Torsatron-type facilities. Mechanisms of the boron carbide erosion are described and discussed. Also described is the behaviour of TiN-coated stainlesssteel surfaces under the irradiation with hydrogen plasma-ion fluxes. In summary, there are described damages in the boron carbide layers and changes in the composition of the TiN-coatings.
Źródło:
Nukleonika; 2000, 45, 3; 209-213
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
NIP JAKO PODSTAWOWY ELEMENT IDENTYFIKACJI PRZEDSIĘBIORCY
TAX IDENTIFICATION NUMBER (NIP) AS THE BASIC ELEMENT OF ENTREPRENEUR DESIGNATION
Autorzy:
ETEL, Maciej
Powiązania:
https://bibliotekanauki.pl/articles/550869.pdf
Data publikacji:
2016
Wydawca:
Wyższa Szkoła Biznesu i Przedsiębiorczości w Ostrowcu Świętokrzyskim
Tematy:
przedsiębiorca
obowiązki
oznaczenie
identyfikacja
podatki
NIP
entrepreneur
obligations
identification
TIN
Opis:
Numer identyfikacji podatkowej (NIP) stanowi obok firmy, siedziby i adresu podstawowy element oznaczenia przedsiębiorcy. Niniejsze opracowanie, w oparciu o analizę obowiązującego prawa, w tym w szczególności ustawy z dnia 2 lipca 2004 r. o swobodzie działalności gospodarczej (tekst jedn. Dz. U. z 2015 r., poz. 584 ze zm.) i ustawy z dnia 13 października 1995 r. o zasadach ewidencji i identyfikacji podatników i płatników (tekst jedn. Dz. U. z 2016 r., poz. 476 ze zm.), orzecznictwo oraz literaturę przedmiotu przedstawia źródła i zakres obowiązków przedsiębiorcy związanych z NIP, założenia i funkcje przypisywane tym obowiązkom oraz konsekwencje niestosowania się do nich, a także cechy relewantne NIP oraz elementy postępowania w sprawie nadawania i aktualizacji NIP.
In accordance with Article 16 Act of 2 July 2004 on Freedom of Economic Activity, an entrepreneur is obligated to place in writ-ten declarations addressed within the scope of their activity to designated persons and authorities the tax identification number (NIP) and use this number in legal and economic transactions. What is more, the identification of the entrepreneur in particular official registers occurs on the basis of the tax identification number. The fundamental assumption of this obligation was that the tax identification number (NIP) from 1 January 2007 on, became the basic element identifying an entrepreneur in legal and economic transactions. The main aim (goal) of the publication is to point out the ideas and functions of NIP obligations.
Źródło:
Acta Scientifica Academiae Ostroviensis. Sectio A, Nauki Humanistyczne, Społeczne i Techniczne; 2016, 8(2)/2016; 264-274
2300-1739
Pojawia się w:
Acta Scientifica Academiae Ostroviensis. Sectio A, Nauki Humanistyczne, Społeczne i Techniczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of TiN Coating Properties Deposited on HS6-5-2C Steel
Ocena właściwości powłoki TiN osadzonej na stali HS6-5-2C
Autorzy:
Kowalczyk, Joanna
Powiązania:
https://bibliotekanauki.pl/articles/1857779.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
TiN coating
DLC coating
Al2O3
physical vapour deposition
PVD
powłoka TiN
powłoka a-C:H
fizyczne osadzanie z fazy gazowej
Opis:
The article presents selected properties of TiN coating on HS6-5-2C steel by Physical Vapour Deposition (PVD). The coating thickness was measured with a Calotest, and its hardness was measured with a nanohardness tester. Tribological parameters were determined, namely, the coefficient of friction and linear wear on the TRB3 tester operating in a ball-on-disk sliding friction pair. The disc was made of HS6-5-2C steel with a TiN coating and the ball of 100Cr6 steel without coating and with a-C:H coating, with Al2O3. The tests were performed under technically dry friction conditions. The coating structure observations were made using a scanning microscope, and the analysis of the geometric structure of samples, before and after tribological tests, were performed with an optical profile measurement gauge. The test results showed that the lowest linear wear was obtained for friction pairs with an Al2O3 ball and a steel ball with a-C:H coating applied.
W artykule przedstawiono wybrane właściwości powłoki TiN osadzonej na stali HS6-5-2C techniką fizycznego osadzania z fazy gazowej PVD. Zmierzono grubość powłoki przy użyciu Calotestera oraz jej twardość za pomocą nanotwardościomierza. Określono parametry tribologiczne, a mianowicie współczynnik tarcia i zużycie liniowe na testerze TRB3 pracującym w skojarzeniu trącym kula–tarcza w ruchu ślizgowym. Tarcza wykonana była ze stali HS6-5-2C z powłoką TiN, a kula ze stali 100Cr6 bez i z naniesioną powłoką a-C:H, z Al2O3. Badania wykonano w warunkach tarcia technicznie suchego. Obserwacje struktury powłoki zrealizowano przy użyciu mikroskopu skaningowego, a analizę struktury geometrycznej powierzchni próbek przed i po testach tribologicznych wykonano profilometrem optycznym. Wyniki badań wskazały, że najmniejsze zużycie liniowe uzyskano dla par trących z kulą wykonaną z Al2O3 oraz stalową z naniesioną powłoką a-C:H.
Źródło:
Tribologia; 2020, 291, 3; 23-31
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic fragmentation of laser shock-melted metals: some experimental advances
Dynamiczna defragmentacja metalu topionego impulsem laserowym: wybrane rezultaty badań doświadczalnych
Autorzy:
Resseguier, T. de
Loison, D.
Lescoute, E.
Signor, L.
Dragon, A.
Powiązania:
https://bibliotekanauki.pl/articles/280617.pdf
Data publikacji:
2010
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
laser shock
fragmentation
liquid spall
shadowgraphy
fragment recovery
tin
aluminium
Opis:
While spall damage in solid materials has been one of the most widely studied shock-driven phenomena, very little data can be found yet about spallation in liquid metals. In recent papers, some of present authors have reported on exploratory investigations of liquid spall – sometimes called "microspall" – in tin samples melted upon laser shocks of high intensities. Modelling approaches have also been discussed and compared with experimental observations. In particular, theoretical fragment size distributions have been compared with experimental distributions inferred from image analyses on fragment-impacted recovery polymer shields. While the curves representing the number per unit area vs. size of fragments present a similar aspect, the numbers predicted by an energy-based model are significantly greater than those observed experimentally. This is due predominantly to the characterisation technique, limited to surface examination, while a number of fragments penetrate the polymer shield and lay below its surface. This is why a new fragment recovery technique is being tested in this paper. This technique, based on a highly transparent low density gel, allows soft recovery and easier observation (compared e.g. with foams or aerogels) of the fragments size, shape and penetration depth, with improved spatial resolution. Coupled with shadowgraphy, scanning electron micrography and optical micrography, this recovery technique progress allows for an advanced insight into the henomenology of microspall related fragmentation. To show it, laser shocks upon a tin target and an aluminium target are investigated, leading to different scenarios regarding melting conditions and fragmentation processes.
O ile problem łuszczenia i wykruszania się materiałów pod wpływem obciążeń udarowych został bardzo szeroko przeanalizowany, bardzo niewiele informacji spotyka się odnośnie odpryskiwania metali w stanie płynnym. Niektórzy z autorów obecnej pracy przeprowadzili badania nad odpryskiem płynnym, czasem zwanego mikroodpryskiem, polegającym na dezintegracji materiału stopionego impulsami laserowymi o dużej mocy. Zaproponowali oni także sposób modelowania tego zjawiska, weryfikując go z wynikami eksperymentalnymi. W szczególności, rozkłady teoretyczne rozmiaru odprysku porównano z wynikami doświadczeń, gdzie metodami analizy obrazu zmierzono rozmiar odpryśniętych cząstek uwięzionych w specjalnych ekranach polimerowych umieszczonych za próbką. Zauważono, że analityczne krzywe rozkładu reprezentujące liczbę odłamków na jednostkę powierzchni w funkcji wielkości tych odłamków pozostają w zgodzie z eksperymentem, jednak już sama ilość zdefragmentowanego materiału wynikającego z modelu energetycznego znacznie przewyższa rezultat doświadczalny. Ta nadwyżka wynika głównie ze stosowanej metody zliczania ilości odprysku, ograniczającej się jedynie do badań powierzchniowych, tymczasem część odprysku penetruje ekran polimerowy znacznie głębiej. Z tego powodu w niniejszej pracy zaproponowano i przetestowano nową metodę jakościowego i ilościowego określania odprysku oraz przedyskutowano jej skuteczność. Nowa metoda bazuje na zastosowaniu zamiast ekranów polimerowych przezroczystego żelu o małej gęstości, umożliwiającego łatwą obserwację (w porównaniu do pianek i aerożeli) wielkości odpryskiwanych cząstek, ich kształtu oraz głębokości penetracji przy zwiększonej rozdzielczości przestrzennej obrazu. Technika ta, wspomagana cieniografią oraz mikrografią optyczną i elektronową (mikroskop skaningowy), stanowi zaawansowane narzędzie do badań nad zjawiskiem mikroodprysku. Do prezentacji skuteczności tej metody przeprowadzono doświadczenia nad próbkami z cyny i aluminium przy różnych warunkach topienia i defragmentacji pod wpływem impulsu laserowego.
Źródło:
Journal of Theoretical and Applied Mechanics; 2010, 48, 4; 957-972
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wstępne badania ługowania cyny z wykorzystanych puszek do przechowywania żywności
Leaching of tin from tinplate steel from used food cans
Autorzy:
Gajda, B.
Gęga, J.
Siwka, J.
Powiązania:
https://bibliotekanauki.pl/articles/181651.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Metalurgii Żelaza im. Stanisława Staszica
Tematy:
cyna
blacha stalowa
recykling
ługowanie
tin
tinplated steel
recycling
leaching
Opis:
W pracy omówiono wyniki wstępnych badań ługowania odpadowych blach pochodzących z wykorzystanych puszek żywnościowych, pokrytych warstwą cyny. Proces prowadzono w środowisku alkalicznym, a materiał wcześniej poddawany był operacji zgniatania w młynie młotkowym. Najlepsze efekty uzyskano w roztworze NaOH o stężeniu 1 mol/dm3 przy stosunku masy fazy stałej do objętości roztworu równym 1:10.
The paper describes the results of leaching of tin from tinplated food cans. The process was conducted in alkaline solutions with the material earlier crushed in a hammer mill. The best results were obtained for 1 M NaOH solution at ratio of mass of solid phase to volume of solution equal to 1:10.
Źródło:
Prace Instytutu Metalurgii Żelaza; 2016, T. 68, nr 1, 1; 26-29
0137-9941
Pojawia się w:
Prace Instytutu Metalurgii Żelaza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
„Rzeczy gdańskie” w domach mieszczan warszawskich w drugiej połowie XVIII wieku
“Gdansk items” in the houses of Warsaw burghers in the second half of the 18th century
Autorzy:
Barylewska-Szklarska, Ewa
Powiązania:
https://bibliotekanauki.pl/articles/1193691.pdf
Data publikacji:
2015
Wydawca:
Towarzystwo Naukowe w Toruniu
Tematy:
furniture
dishes
faience
tin
fabrics
Gdansk
burghers
Warsaw
material culture
Opis:
As proven by research on Polish cra and material culture, Gdansk has for a long time been considered as a destination for both imported luxurious goods and products made in local craftsmen’s workshops. The Gdansk market of the 18th century responded to the needs of the Polish noblemen, clergy and magnates. Burghers from Warsaw also purchased goods sold in Gdansk. This issue has been touched upon in earlier research by Bożenna Maszkowska and Hanna Szwankowska. There were few Gdansk products in the houses of Warsaw burghers in the second half of the 18th century; however, the phenomenon is worth mentioning. In the houses of Warsaw burghers wardrobes, seating furniture, cabinets andtables could be found. Nevertheless, the most common goods found in Warsaw homes were boxes manufactured in Gdansk. The list also includes faience and tin products, furnishing fabrics, table cloths and towels. Yet, it is uncertain whether the goods described here were manufactured in Gdansk, or perhaps they were made in the north of Poland in smaller centres near Gdansk, which copied the Gdansk manufacturing style.
Źródło:
Zapiski Historyczne; 2015, 80, 3; 105-124
0044-1791
2449-8637
Pojawia się w:
Zapiski Historyczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cięcie serów nożem z powłoką TiN
Cutting of cheeses using a knife with TiN coating edge
Autorzy:
Kowalik, K.
Sykut, B.
Opielak, M.
Michałek, W.
Tomporowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/2072569.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
cięcie
ser
azotek tytanu (TiN)
energochłonność
cutting
cheese
titanium nitride
Opis:
W pracy przedstawiono wyniki badań energochłonności jednostkowej procesu cięcia serów żółtych. Materiały te różniły się zawartością tłuszczu w suchej masie. Proces realizowano dwoma narzędziami. Energochłonność procesu cięcia nożem pokrytym azotkiem tytanu (TiN) porównano z energochłonnością procesu realizowanego nożem ze stali narzędziowej NC6. Zmniejszenie wartości energochłonności jednostkowej procesu wynikające z zastosowania narzędzia pokrytego TiN wynosiło 0,3÷20%.
The paper presents research results dealing with the energy consumption in the cheeses cutting process. Tested materials varied in fat content in dry matter. The energy consumption of cutting process using a knife coated with titanium nitride (TiN) were compared with the energy consumption of cutting process using a knife made of NC6 tool steel. A reduction in the unit energy consumption of cutting process using a knife coated with titanium nitride (TiN) was in the range of 0.3÷20%.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 2; 118-119
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The environmental implications of the exploration and exploitation of solid minerals in Nigeria with a special focus on Tin in Jos and Coal in Enugu
Autorzy:
Omotehinse, Adeyinka O.
Ako, Bankole D.
Powiązania:
https://bibliotekanauki.pl/articles/91927.pdf
Data publikacji:
2019
Wydawca:
Główny Instytut Górnictwa
Tematy:
tin
coal
exploration activities
exploitation activities
cyna
węgiel
poszukiwanie
eksploatacja
Opis:
Mining activities can have serious negative effects on the environment, these effects occur from the exploration stage to the closure stage of a mine's operation. Nigeria has different minerals and exploration/exploitation of these minerals can affect the environment. The objective of this paper is to consider how the exploration and exploitation of Tin in Plateau and Coal in Enugu has affected the environment. The Jos field (Plateau State) is used as a case study for areas with existing mines and the coal mines at Enugu represent areas with closed mines. The methodology used for this research includes a field survey; direct mapping of mining activities; assessment of the impacts of exploration and exploitation; documentary analysis; and observations. The results include analysis of the mining impacts of Tin and Coal on the environment. It is hoped that the conclusion of this study will enable Nigeria to put in place and enforce certain minimum environmental standards for solid mineral exploration and exploitation. In addition, best management practices for reclaiming surface mines could also be put in place.
Źródło:
Journal of Sustainable Mining; 2019, 18, 1; 18-24
2300-1364
2300-3960
Pojawia się w:
Journal of Sustainable Mining
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Area-Storage Capacity Curve of Historic Artificial Water Reservoir Ottergrund, Slovakia – Assessment of the Historical Data With the use of GIS Tools
Autorzy:
Fuska, J.
Kubinský, D.
Weis, K.
Lackóová, L.
Pokrývková, J.
Leitmanová, M.
Panagopoulos, T.
Powiązania:
https://bibliotekanauki.pl/articles/952370.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
area-storage capacity curve
historic map
TIN model
water reservoir
Opis:
The main goal of this work was to verify the historic data of historic artificial water reservoir Ottergrund, Banská Štiavnica district, which is inscribed in the UNESCO world heritage list. Main focus was set to area-storage capacity curve. There is historic map with the display of reservoir bottom contours and area-storage capacity curve in a paper format. These data were analysed and compared with the results of the calculation of area-storage capacity curve that was performed with the use of a new tool with named “ASC_Curve”, which is based on Python script. This tool utilizes ArcPy site package and it works with the TIN model of water reservoir bottom. In case of water reservoir Ottergrund we created the TIN model of the historic bottom; input data for the TIN model creation was the historic contour plan. The results of the analysis have shown that the storage capacity calculated with the use of the developed ASC_Curve tool is 97% of the volume mentioned in the historic map. Analysis has also show the minor mathematical errors in the calculations of the area-storage capacity data in historic contour plan. This tool can also be used also for the analysis of the current storage capacity conditions of the water reservoirs, if the surveying with echosounding equipment is performed to obtain the data to produce the TIN model of the water reservoir bottom.
Źródło:
Journal of Ecological Engineering; 2017, 18, 1; 48-56
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prototyp przecinarki z frezem tarczowo-piłkowym mocowanym od spodu przedmiotu obrabianego
Prototype of the cutter with a circular saw blade fixed from the bottom of the workpiece
Autorzy:
Gustowski, Tomasz
Kurek, Waldemar
Samsonik, Krystian
Grzejda, Rafał
Powiązania:
https://bibliotekanauki.pl/articles/2175489.pdf
Data publikacji:
2022
Wydawca:
STE GROUP
Tematy:
circular saw
circular saw blade
long line profiles
high-speed steel
TiN coating
przecinarka tarczowa
frez tarczowo-piłkowy
długie profile liniowe
stal szybkotnąca
powłoka TiN
Opis:
W artykule przedstawiono prototyp przecinarki tarczowej z narzędziem mocowanym od spodu przedmiotu obrabianego. Układ przeznaczony jest do obróbki długich profili liniowych stosowanych w stalowych konstrukcjach inżynierskich. Umożliwia cięcie profili o zamkniętych lub otwartych przekrojach poprzecznych na zadany wymiar. Układ jest częścią innowacyjnej linii technologicznej do automatycznego cięcia plazmowego, cięcia frezem tarczowo-piłkowym oraz spawania z wykorzystaniem robotów spawalniczych.
In the paper, a prototype of a circular saw with a tool fixed from the bottom of the workpiece is introduced. The system is intended for the processing of long linear profiles used in engineering steel structures. It enables cutting profiles with closed or open cross-sections to a given size. The system is part of an innovative technological line for automatic plasma cutting, circular saw cutting and welding with use of welding robots.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2022, 11, 2; 57--65
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ecological Electroplating Baths and Their Application in the Tin-coating of Copper Wires Intended for Photovoltaic Cables
Autorzy:
Olędzki, Aleksander
Knych, Tadeusz
Zasadzińska, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/24201268.pdf
Data publikacji:
2023
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
tin-coated copper wires
photovoltaic cables
ecological electroplating baths
electrodeposition parameters
Opis:
Copper wires are covered with various coatings for many different applications. The most popular are tin based coatings and both their thickness and quality have been standardized by means of appropriate standard specifications. Copper wires intended for photovoltaic cables are subjected to especially high requirements due to their exceptionally long operating time and extremely unfavourable working conditions. Tin coatings are applied using the electroplating method and generally a fluoroborate bath is used during the process, however, it has been proved to be a health hazard in general and harmful to the environment as a whole. The paper presents the research results of a new ecological methane-sulfonate bath which does not form hazardous waste in the process. The examples of tin coatings of various thickness and the way of obtaining them at varying electrodeposition speeds at constant current or constant speed with varying current intensity were analysed. It has been determined that the use of the new electroplating bath is not only beneficial from an ecological point of view, but also in terms of the coating quality and efficiency of the process.
Źródło:
Journal of Casting & Materials Engineering; 2023, 7, 3; 31--40
2543-9901
Pojawia się w:
Journal of Casting & Materials Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combined Effects of Copper and Tin at Intermediate Level of Manganese on the Structure and Properties of As-Cast Nodular Graphite Cast Iron
Autorzy:
Lacaze, J.
Sertucha, J.
Larrañaga, P.
Suárez, R.
Powiązania:
https://bibliotekanauki.pl/articles/352595.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pearlitic nodular cast irons
copper
manganese
tin
room temperature mechanical properties
Opis:
Copper, manganese and tin are commonly used as pearlite promoter elements in cast irons. A number of studies have been aimed at quantitatively evaluate the effect of each of these elements, individually or at given levels of the others. As a matter of fact, while tin may be necessary for achieving a fully pearlitic matrix, it is known that when in excess it is detrimental for mechanical properties. As the pearlite promoting effect of each of those elements is totally different, it is of real interest to know the optimum combination of them for a given cooling rate. The present report is a first part of a work dedicated at characterizing the best alloying levels in terms of room temperature mechanical properties of as-cast pearlitic materials.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2A; 825-831
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dry Sliding Friction and Wear Behaviour of Leaded Tin bronze for Bearing and Bushing Application
Autorzy:
Dinesh, D.
Megalingam, A.
Powiązania:
https://bibliotekanauki.pl/articles/2049132.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wear
coefficient of friction
microstructure
leaded tin bronze
grey relational analysis
Opis:
Among different bearing materials, copper-based alloys are the most important source for bearing and bushing applications. In this work, the tribological behavior of a leaded tin bronze (Cu-22Pb-4Sn) against an EN31 Steel for various loads (20 N, 70 N, 120 N) and different sliding velocity (1 m/s, 3 m/s, 5 m/s) at 3000 m sliding distance is performed using a pin on disk tribometer. Irrespective of all loads and sliding velocity, a higher specific wear rate is observed at 1 m/s and 120 n that fails to facilitate the formation of lubricating film, whereas a lower specific wear rate is evident when the sliding velocity is increased to 5 m/s. This is attributed to the formation of a stable oxide layer that has been confirmed through the energy dispersive X-ray spectroscopy analysis and scanning electron microscopy. The coefficient of friction is observed in reducing trend from 0.69 to 0.48 for the increasing load (70 N, 120 N) and sliding velocity (3 m/s and 5 m/s) due to stable thin oxide film formation. Also, the increase in frictional force and loading the interacting surface temperature is increased to a maximum of 102°C. The grey relational analysis indicates that the optimal parameters for the minimum specific wear rate and coefficient of friction is 120 N and 5 m/s that has been confirmed with experimental analysis.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 4; 1095-1104
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of TiN nanoparticles on the microstructure and hardness of arc overlaid welding layers
Autorzy:
Kondov, H.
Tashev, P.
Powiązania:
https://bibliotekanauki.pl/articles/391391.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Odlewnictwa
Tematy:
arc overlay welding
nanomodifiers
nanosized TiN
nanopowders
heat treatment
Vickers hardness
Opis:
Electrodes for manual arc overlay welding with coating containing nanomodifier TiN in concentrations between 0.2% and 1.5% were developed and manufactured. Samples of welded overlay layers with electrodes were both examined by electron microscopy and X-ray microanalysis. Some samples were subjected to heat treatment consisting of annealing and subsequent hardening in water and oil. The Vickers hardness HV15/15 of the samples in the prepared state, and both after annealing and hardening were measured. It was found that growth of the hardness of nanomodified layers were up to 180 percent compared to the reference sample.
Źródło:
Prace Instytutu Odlewnictwa; 2017, 57, 4; 309-314
1899-2439
Pojawia się w:
Prace Instytutu Odlewnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Molibden i cyna w glebach Polski
Molybdenum and tin in soils of Poland
Autorzy:
Pasieczna, A.
Powiązania:
https://bibliotekanauki.pl/articles/2062754.pdf
Data publikacji:
2012
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
molibden
cyna
zanieczyszczenie gleb
Polska
molybdenum
tin
environmental soil pollution
Polska
Opis:
Badania miały na celu ocenę zawartości molibdenu i cyny w powierzchniowej warstwie gleb Polski użytkowanych rolniczo. Pierwiastki te mogą być wykorzystane jako wskaźniki zanieczyszczenia środowiska, szczególnie na obszarach pozbawionych mineralizacji. Do celów przeglądowego zdjęcia geochemicznego pobrano gleby z głębokości 0,0–0,2 m z gęstością 1 próbka/2500 km2. Zawartość Mo i Sn oznaczono metodą ICP-AES po roztworzeniu próbek w wodzie królewskiej. Wyniki analiz wykazały zawartość molibdenu w granicach 0,05–1,71 mg/kg, a cyny 0,1–2,6 mg/kg. Przestrzenny rozkład tych pierwiastków w glebach wskazuje, że głównym czynnikiem decydującym o ich zawartości jest skład chemiczny skał macierzystych.
The geochemical research has been conducted to evaluate molybdenum and tin content in topsoil of Poland, because these elements can be used as environmental pollution indicators, especially in areas without mineralization. Topsoil (0.0–0.2 m) samples were collected at a low sampling density (1 sample per 2,500 km2). The Mo and Sn contents, determined using the ICP-AES method, following aqua regia digestion, were 0.05–1.71 mg/kg and 0.1–2.6 mg/kg, respectively. The spatial distribution of these elements indicates that the principal factor determining their contents in topsoil is the chemical composition of parent rocks.
Źródło:
Biuletyn Państwowego Instytutu Geologicznego; 2012, 450; 75--81
0867-6143
Pojawia się w:
Biuletyn Państwowego Instytutu Geologicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved Long-Term Stability of Transparent Conducting Electrodes Based on Double-Laminated Electrosprayed Antimony Tin Oxides and Ag Nanowires
Autorzy:
Koo, B.-R.
Bae, J.-W.
Ahn, H.-J.
Powiązania:
https://bibliotekanauki.pl/articles/355292.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
transparent conducting electrodes
Ag nanwories
antimony tin oxides
long-term stability
Opis:
We fabricated double-laminated antimony tin oxide/Ag nanowire electrodes by spin-coating and electrospraying. Compared to pure Ag nanowire electrodes and single-laminated antimony tin oxide/Ag nanowire electrodes, the double-laminated antimony tin oxide/Ag nanowire electrodes had superior transparent conducting electrode performances with sheet resistance ~19.8 Ω/□ and optical transmittance ~81.9%; this was due to uniform distribution of the connected Ag nanowires because of double lamination of the metallic Ag nanowires without Ag aggregation despite subsequent microwave heating at 250°C. They also exhibited excellent and superior long-term chemical and thermal stabilities and adhesion to substrate because double-laminated antimony tin oxide thin films act as the protective layers between Ag nanowires, blocking Ag atoms penetration.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1275-1279
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
O zawartosci cyny i żelaza w niektórych polskich konserwach rybnych
Soderzhanie olova i zheleza v nekotorykh rybnykh konservakh
The influence of the time of storage on the zinc and iron content in canned fish products
Autorzy:
Wierzchowski, J.
Severin, M.
Powiązania:
https://bibliotekanauki.pl/articles/871680.pdf
Data publikacji:
1957
Wydawca:
Narodowy Instytut Zdrowia Publicznego. Państwowy Zakład Higieny
Tematy:
konserwy rybne
puszki metalowe
zawartosc cyny
zawartosc zelaza
blacha ocynowana
korozja
przechowywanie
czas przechowywania
tinned fish
tin
metal packaging
tin content
iron content
corrosion
storage
storage time
Źródło:
Roczniki Państwowego Zakładu Higieny; 1957, 08, 5
0035-7715
Pojawia się w:
Roczniki Państwowego Zakładu Higieny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odporność na zużycie oraz biozgodność narzędzi stomatologicznych ulepszanych różnymi powłokami
Wear resistance and biocompatibility of dental tools upgraded by different coatings
Autorzy:
Biel-Gołaska, M.
Kalemba, I.
Powiązania:
https://bibliotekanauki.pl/articles/391630.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Odlewnictwa
Tematy:
narzędzia stomatologiczne
powłoki TiN i TiAlN
metoda PAPVD
badania metalograficzne
biozgodność
badania eksploatacyjne
dental tools
TiN and TiAlN coatings
PAPVD method
metallographic observations
biocompatibility
wear resistance
Opis:
Narzędzia stomatologiczne ulegają zniszczeniu, zarówno w procesie ich użytkowania, jak i podczas sterylizacji oraz dezynfekcji. Celem zwiększenia trwałości wierteł stomatologicznych i pincet oraz zwiększenia zgodności biologicznej podjęto próbę ulepszenia ich powierzchni poprzez wytworzenie powłok z TiN i TiAlN. Powłoki zostały naniesione technologią PAPVD (Plasma Assisted Physical Vapour Deposition). Przeprowadzono dwuletnie badania eksploatacyjne wierteł stomatologicznych i pincet oraz obserwacje metalograficzne powierzchni zużytych po 3, 6, 9, 12 i 24 miesiącach. Wyniki badań zostały przedstawione w niniejszym artykule.
Dental tools are sometimes damaged as a results of exploitation or during sterilization and desinfection. The aim of durability improving of dental borers and tweezers and increasing of the biocompatibility was modification of the surface of tools by TiN and TiAlN coatings. The coatings were made by PAPVD technology (Plasma Assisted Physical Vapour Deposition). The dental borers and tweezers were observed after the operation time of 3, 6, 9, 12 and 24 months. The results of investigation are presented in this article.
Źródło:
Prace Instytutu Odlewnictwa; 2008, 48, 1; 31-40
1899-2439
Pojawia się w:
Prace Instytutu Odlewnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of the type of coating on the cutting tool wear during turning of 316L austenitic stainless steel
Autorzy:
Maruda, R. W.
Szczotkarz, N.
Powiązania:
https://bibliotekanauki.pl/articles/94100.pdf
Data publikacji:
2018
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
dry cutting
tool wear
316L austenitic steel
SEM
TiN and TiAlN coatings
cięcie na sucho
zużycie narzędzi
stal austenityczna 316L
powłoki TiN i TiAlN
Opis:
The paper presents the influence of coatings applied with the use of PVD method on cutting tools on the wear of the tool and compares it with an uncoated P25 cemented carbide plate. During the experiment, two types of TiAlN coatings were used, applied in various proportions, as well as TiN coating. During the tests, the average width of the wear band on the flank face in B VBBzone and the width of KBcrater were monitored. Moreover, the scanning analysis of the tool was conducted in order to determine the intensity of adhesive wear. The lowest values of selected tool wear indicators were found out with the use of TiAlN coating applied in eight layers in the proportions 33/67% -TiN/TiAlN. The scanning analysis proved the highest adhesive wear of the uncoated P25 cemented carbide plate, as well as increased abrasive wear of the flank face and the formation of a crater in comparison with coated plates.
Źródło:
Archives of Mechanical Technology and Materials; 2018, 38; 45-49
2450-9469
Pojawia się w:
Archives of Mechanical Technology and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the Change in Thickness of the Thin Double Reduced Steel Sheets by Drawing of Cups
Autorzy:
Majerníková, Janka
Spišák, Emil
Kaščák, Ľuboš
Slota, Ján
Powiązania:
https://bibliotekanauki.pl/articles/102753.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
packaging sheets
tin layer
cupping test
arkusz opakowaniowy
warstwa cyny
test cuppingowy
Opis:
During the processing of the thin packaging sheets by drawing, thickness of the material changes and so does the thickness of tin layer, this has an influence on corrosion resistance. Change in material thickness of the cylindrical cups without a flange has been evaluated in this contribution. Cups were produced from the double reduced continuously annealed packaging sheets. After cupping test, the anisotropy of these sheets was evaluated too, this was expressed through the earring formation on the cups.
Źródło:
Advances in Science and Technology. Research Journal; 2018, 12, 4; 28-34
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stereometryczna weryfikacja NMT uzyskanego ze skaningu laserowego
Autorzy:
Piechocka, N.
Marmol, U.
Jachimski, J.
Powiązania:
https://bibliotekanauki.pl/articles/130266.pdf
Data publikacji:
2004
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
skaning laserowy
stereometria
NMT
powierzchnia topograficzna
TIN
laser scanning
stereometry
topographic survey
Opis:
Lotniczy skaning laserowy zyskuje coraz większe znaczenie jako metoda pozyskiwania informacji o powierzchni topograficznej oraz elementach pokrycia terenu. W ostatnich latach zostało opracowanych kilkanaście algorytmów do automatycznej filtracji danych laserowych. Niestety, istniejące metody posiadają jeszcze widoczne ograniczenia, związane z nieprawidłową eliminacją punktów w obszarach o skomplikowanym ukształtowaniu i użytkowaniu terenu i nadal niezbędny jest znaczący, interaktywny udział operatora. W niniejszym referacie przedstawiona jest stereometryczna weryfikacja dwóch metod filtracyjnych: algorytmu aktywnego modelu TIN i algorytmu częstotliwościowego opartego na FFT. Algorytm aktywnego modelu TIN został rozwinięty na Wydziale Geodezji i Fotogrametrii w Królewskim Instytucie w Sztokholmie. Na opracowanym algorytmie bazuje komercyjne oprogramowanie - TerraScan. Metoda oparta na FFT została opracowana w Zakładzie Fotogrametrii i Informatyki Teledetekcyjnej AGH i jest nadal w fazie badań empirycznych, określających jej wiarygodność i dokładność. W prezentowanym opracowaniu dane uzyskane w wyniku filtracji zostały porównane ze stereogramami cyfrowych zdjęć lotniczych. Obrazy cyfrowe zostały pozyskane w trakcie nalotu laserowego, odpowiadają więc dokładnie danym uzyskanym w procesie skanowania. Analiza polegała na wyborze próbek, charakteryzujących się różnym ukształtowaniem i użytkowaniem terenu (roślinność, zabudowa). Dla każdego obszaru testowego zostały wyznaczone, na podstawie odchyłek pomiędzy wzorcem pochodzącym z pomiaru stereometrycznego a odfiltrowaną powierzchnią, podstawowe parametry statystyczne: średni błąd kwadratowy RMSE, średnia arytmetyczna i odchylenie standardowe. Uzyskane wyniki ujawniają, że w przypadku terenów o skomplikowanym ukształtowaniu lub pokryciu, obydwa algorytmy wykazują pewne ograniczenia i różnice. Algorytm aktywnego modelu TIN, lepiej niż algorytm oparty na FFT, eliminuje pomierzone punkty w miejscach pokrycia terenu gęstymi, wysokimi drzewami liściastymi oraz wysokimi trawami. W miejscach takich jak krzaki, pojedynczo rosnące drzewo, uzyskane wyniki odfiltrowania przy wykorzystaniu obu algorytmów są porównywalne. Natomiast teren o dużym stopniu zurbanizowania został prawidłowo odfiltrowany przez oba algorytmy.
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2004, 14; 1-12
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study On The Electro-Refining Of Tin In Acid Solution From Electronic Waste
Badanie elektrorafinacji cyny w roztworze kwasu z e-odpadów
Autorzy:
Son, S. H.
Park, S. C.
Kim, J. H.
Kim, Y. H.
Lee, M. S.
Ahn, J.-W.
Powiązania:
https://bibliotekanauki.pl/articles/352665.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electrorefining
tin
electronic waste
recycling
high purity
elektrorafinacja
cyna
odpady elektroniczne
recykling
Opis:
The tin metal could be retractable from wasted tin scrap, sludge, and wasted electroplated solution hydrometallurgical treatment, and purification process. In order to be used as resource of electronic devices, the retracted crude metal should be purified to the extent of higher than 99.9%. In this study, tin electro-refining process was performed to purify the casted tin crude metal at various experimental conditions: at the current density of 3, 5A/dm2, and in various electrolytes such as hydrochloric acid, sulfuric acid and methansulfonic acid. Additional experiment was conducted using Rotating Disk Electrode (RDE) in order to investigate the rate determining step of tin electro-refining process. The current efficiency, 65.6%, was achievable at the condition of current density, 5A/dm2, and in the electrolyte of Hydrochloric acid. During tin electro-refining process, impurity dissolved from tin crude metal into the electrolyte was analyzed using Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES), and the result showed the concentration of impurity metal gradually increased. Quantitative analysis on casted tin crude metal showed that it consists of tin with 93.9 wt.% and several impurity metals of Ag, Bi, Pb, Cu, and etc. After tin electro-refining process, the purity of tin increased up to 99.985 wt.%.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1217-1220
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Whisker Formation On Galvanic Tin Surface Layer
Tworzenie whiskerów na powierzchniowej warstwie cyny wytworzonej galwanicznie
Autorzy:
Radanyi, A. L.
Sycheva, A.
Gacsi, Z.
Powiązania:
https://bibliotekanauki.pl/articles/356255.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tin whiskers
galvanic tin layer
mechanical stress
X-ray fluorescence spectrometry
scanning electron microscopy
wiskery cynowe
galwaniczne powłoki cynkowe
naprężenia mechaniczne
rentgenowska spektroskopia fluorescencyjna
mikroskop skaningowy (SEM)
Opis:
The present work reports the effect of substrate composition, thickness of the tin electroplate and its morphology on pressure-induced tin whisker formation. Pure tin deposits of different thickness were obtained on a copper and brass substrates using methane sulfonic industrial bath. The deposits were compressed by a steel bearing ball forming imprint on the surface. The microstructure of tin whiskers obtained at the boundary of each imprint, their length and number were studied using both light and scanning electron microscopy. It was shown that the most intensive formation and growth of whiskers was observed in the first two hours. In general, brass substrate was shown to be more prone to whisker formation than copper independently of the tin coating thickness. The results have been compared with industrial bright tin finish on control unit socket leads and proposals have been made as to modification of the production process in order to minimize the risk of whiskering.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1341-1345
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Obciążenie graniczne powłok wielowarstwowych TiN/CrN w styku tribologicznym kula-tarcza
Load capacity of TiN/CrN multilayers coatings in ball-on-disc tribological contact
Autorzy:
Zimowski, S.
Rakowski, W.
Major, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/190330.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
multiwarstwy
TiN/CrN
obciążenie graniczne
tarcie
zużycie
multilayers
load capacity
friction
wear
Opis:
W artykule przedstawiono wyniki badań strukturalnych, mikromechanicznych i tribologicznych powłok wielowarstwowych typu TiN/CrN. Powłoki o całkowitej grubości 1 μm, zbudowane z 2, 8 i 32 na przemian ułożonych warstw TiN i CrN osadzono laserem impulsowym na stali ferrytycznej metodą PLD (Pulsed Laser Deposition). Strukturę powłok badano z użyciem elektronowego mikroskopu transmisyjnego (TEM). Badania właściwości mechanicznych wykazały zależność twardości i modułu sprężystości od liczby warstw w powłoce. Badania tribologiczne wykonano w styku kula (Al2O3) – tarcza w warunkach tarcia technicznie suchego, stosując obciążenie 0,5; 1 i 2N. Zbyt duże obciążenie powłok ceramicznych pracujących w warunkach styku skoncentrowanego może spowodować przekroczenie nośności układu powłoka–podłoże, co prowadzi do pękania warstwy ceramicznej i gwałtownego jej zużycia. Graniczną wartość obciążenia określono jako najmniejszy nacisk na kulkę powodujący gwałtowne zużycie powłoki o charakterze patologicznym. Na podstawie przeprowadzonych badań można wnioskować, że zwiększenie liczby warstw w powłoce wielowarstwowej od 2 do 32, z równoczesnym zmniejszaniem ich grubości od 500 nm do 31 nm ma silny wpływ na właściwości tribologiczne. Największe obciążenie graniczne oraz największą odporność na zużycie uzyskano dla powłok złożonych z 32 warstw, charakteryzujących się zarazem najmniejszym współczynnikiem tarcia.
The structure and micromechanical and tribological properties of the multilayer of TiN/CrN are presented in the paper. The TiN/CrN coatings built of 2, 8 and 32 layers with the overall thickness of 1μm obtained by Pulsed Laser Deposition (PLD) method were investigated. Analysis of transmission electron microscopy images (TEM) showed highly defective columnar structure of individual layers. The hardness and elastic modulus depend on the number of layers in the coating. In the case when a load carrying capacity of the ceramic coating-substrate system is exceed, ceramic layer cracks are created and multiply wear due to the presence of the hard abrasive particles between sliding surfaces. The load carrying capacity was defined as the smallest load applied on of the ball, which induced rapid abrasive wear of the coating. An increase in the number of the layers in the coating from 2 to 32, with a decrease of their thickness from 500 nm to 31 nm, strongly influence of the tribological properties. The maximum hardness (21 GPa) and the best adherence (LC = 8,4 N) are presented in the 8-layers coating, while the 32-layers coating showed the highest load carrying capacity and wear resistance as well as the lowest friction coefficient (0,1).
Źródło:
Tribologia; 2009, 4; 275-284
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Corrosion Processes on Friction And Wear of Tin Coatings of Wire Connectors
Wpływ procesów korozyjnych na tarcie i zużywanie powłok cynowych na końcówkach konektorowych przewodów elektrycznych
Autorzy:
Grygier, Dominika
Kowalewski, Piotr
Radzińska, Angelika
Powiązania:
https://bibliotekanauki.pl/articles/1857806.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
connectors
corrosion
tin coatings
electrical connectors
konektory
korozja
powłoki cynowe
złączki elektryczne
Opis:
The paper describes the results of metallographic, tribological, and microscopic tests of wire connectors. It was shown that the structure and thickness of the tin layer on the copper element varies greatly. The paper describes the results of tribological investigations for electrical connectors in the initial state and covered with a layer of oxides formed as a result of corrosion. The results of tribological tests have shown a great influence of the oxide layer on friction and wear of tin coatings. The results of friction factor measurements were confirmed by microscopic observations. The tests confirmed that the oxide layer reduces plastic deformation of the tin coating and limits its tribological wear. Due to the brittleness and low adhesion of the oxide layer, friction-induced chipping was observed.
W pracy opisano wyniki badań metalograficznych, tribologicznych i mikroskopowych końcówek wiązek elektrycznych, tzw. końcówek konektorowych. Wykazano duże zróżnicowanie struktury i grubości warstwy cynowej na elemencie wykonanym z miedzi. W pracy opisano wyniki badań tribologicznych dla końcówek konektorowych w stanie wyjściowym i pokrytych warstwą tlenków powstałych na skutek korozji. Wyniki badań tribologicznych wykazały duży wpływ warstwy oksydacyjnej na proces tarcia i zużywanie powłok cynowych. Wyniki pomiarów współczynnika tarcia potwierdzono obserwacjami mikroskopowymi. Wykazano, że warstwa tlenków zmniejsza deformację plastyczną powłoki cynowej i ogranicza jej zużywanie tribologiczne. Ze względu na kruchy charakter i małą przyczepność warstwy tlenkowej zaobserwowano wykruszanie się jej spowodowane tarciem.
Źródło:
Tribologia; 2020, 294, 6; 13-19
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sn-Pd-Ni Electroplating on Bi2Te3-Based Thermoelectric Elements for Direct Thermocompression Bonding and Creation of a Reliable Bonding Interface
Autorzy:
Kang, Seok Jun
Bae, Sung Hwa
Son, Injoon
Powiązania:
https://bibliotekanauki.pl/articles/2049169.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tin electroplating
thermoelectric module
thermocompression bonding
Bi2Te3
direct bonding
Opis:
The Sn-Ag-Cu-based solder paste screen-printing method has primarily been used to fabricate Bi2Te3-based thermoelectric (TE) modules, as Sn-based solder alloys have a low melting temperature (approximately 220°C) and good wettability with Cu electrodes. However, this process may result in uneven solder thickness when the printing pressure is not constant. Therefore, we suggested a novel direct-bonding method between the Bi2Te3-based TE elements and the Cu electrode by electroplating a 100 μm Sn/ 1.3 μm Pd/ 3.5 μm Ni bonding layer onto the Bi2Te3-based TE elements. It was determined that there is a problem with the amount of precipitation and composition depending on the pH change, and that the results may vary depending on the composition of Pd. Thus, double plating layers were formed, Ni/Pd, which were widely commercialized. The Sn/Pd/Ni electroplating was highly reliable, resulting in a bonding strength of 8 MPa between the thermoelectric and Cu electrode components, while the Pd and Ni electroplated layer acted as a diffusion barrier between the Sn layer and the Bi2Te3 TE. This process of electroplating Sn/Pd/Ni onto the Bi2Te3 TE elements presents a novel method for the fabrication of TE modules without using the conventional Sn-alloy-paste screen-printing method.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 4; 963-966
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electrochemical synthesis of tetragonal SnO2 phase
Elektrochemiczna synteza SnO2 o strukturze tetragonalnej
Autorzy:
Mech, K.
Kowalik, R.
Fitzner, K.
Powiązania:
https://bibliotekanauki.pl/articles/351445.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
dwutlenek cyny
synteza elektrochemiczna
elektrochemia
elektrograwimetria
tin dioxide
electrochemical synthesis
electrodeposition
electrogravimetry
Opis:
The main aim of this research was to determine parameters of deposition of tetragonal SnO2 phase by electrochemical method. The influence of different parameters like potential of a working electrode, the electrolyte composition and time of deposition on the morphology of the electrodeposited SnO2 was determined by LSV and QCM techniques. The mechanism of the oxide formation is also discussed. The morphology and structure of films was characterized by AFM and XRD technique.
Celem badań było określenie parametrów osadzania SnO2 o strukturze tetragonalnej metodą elektrochemiczną. Określony został wpływ parametrów takich jak: potencjał elektrody pracującej, skład elektrolitu oraz czas trwania elektrolizy na morfologię osadzonego SnO2. Badania prowadzono z wykorzystaniem technik LSV oraz QCM. W artykule omówiony został również mechanizm tworzenia się SnO2. Do charakterystyki morfologii uzyskanych cienkich warstw wykorzystano mikroskop AFM. Badania strukturalne wykonano metodą XRD.
Źródło:
Archives of Metallurgy and Materials; 2011, 56, 3; 659-663
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Temperature Effect on the Growth Rate and Physical Characteristics of SnO2 Thin Films Grown by Atomic Layer Deposition
Autorzy:
Kim, D.
Kim, D. H.
Riu, D.-H.
Choi, B. J.
Powiązania:
https://bibliotekanauki.pl/articles/353808.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
atomic layer deposition
tin oxide
growth rate
film density
optical band gap
Opis:
Among the various thin film coating techniques, atomic layer deposition (ALD) has features of good controllability of the thickness, excellent step-coverage in 3-dimensional object even in the sub-nm thickness range at the relatively low deposition temperature. In this study, SnO2 thin films were grown by ALD in the variation of substrate temperatures from 150 to 250°C. Even such a low temperature may influence on the growth kinetics of the ALD reaction and thus the physical characteristics of thin films, such as crystallinity, film density and optical band gap, etc. We observed the decrease of the growth rate with increasing substrate temperature, at the same time, the density of the film was decreased with increasing temperature. Steric hindrance effect of the precursor molecule was attributed to the inverse relationship of the growth temperature and growth rate as well as the film density. Optical indirect band gap energy (~3.6 eV) of the ALD-grown amorphous SnO2 films grown at 150°C was similar with that of the literature value, while slightly lower band gap energy (~3.4 eV) was acquired at the films grown at higher temperature.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 1061-1064
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oznaczanie cyny w żywności za pomocą kwercetyny
Opredelenie olova v prodovolstvii pri pomoshhi kvercetina
Tin estimation in foods by means of quercetin
Autorzy:
Malkus, Z.
Powiązania:
https://bibliotekanauki.pl/articles/874629.pdf
Data publikacji:
1957
Wydawca:
Narodowy Instytut Zdrowia Publicznego. Państwowy Zakład Higieny
Tematy:
zywnosc
konserwy
opakowania blaszane
higiena zywnosci
cyna
zawartosc cyny
oznaczanie zawartosci
metoda kolorymetryczna
kwercetyna
food
tinned food
metal packaging
food hygiene
tin
tin content
determination
colorimetric method
quercetin
Źródło:
Roczniki Państwowego Zakładu Higieny; 1957, 08, 1
0035-7715
Pojawia się w:
Roczniki Państwowego Zakładu Higieny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Verify the plasma parameters generated from the Tin material using the laser-induced plasma technique
Autorzy:
Ahmed, Baida M.
Aadim, Kadhim A.
Khalaf, Madyan A.
Powiązania:
https://bibliotekanauki.pl/articles/1030607.pdf
Data publikacji:
2020
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Laser-Induced Plasma (LIP)
Nd:YAG laser
Optical Emission Spectroscopic (OES)
Tin (Sn)
Opis:
In this work, A spectroscopic research on laser-produced tin plasma using optical emission spectroscopy (OES) technology is provided. Laser-induced Sn plasma produced at various laser energy has also been defined by visible emission spectroscopy. Plasma is created by a solid tin object radiated by a pulsed laser in a room environment. A Nd:YAG laser pulse 9 ns in duration with wavelength of 1064 nm and a focal length of 10 cm in the range of energy 500-800 mJ is used to generate plasma from a planar Sn sample. The electron temperature (Te) was calculated in ratio line intensities method, while the electron density (ne) was calculated using Saha-Boltzmann equation, also another plasma parameters was calculated such as plasma (fp), Debye length (λD) and Debye number (ND). The increase in electron temperature and density was observed as a function of laser energies. Measurement of the production of the electron temperature in the rang 0.926-0.952 eV, While the electron density is in the rang (1.9×1015-2.5×1015) cm-3.
Źródło:
World Scientific News; 2020, 144; 326-337
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Elaboration of magnetron deposition conditions of TiN/Si3N4 nanocomposite coatings
Opracowanie warunków otrzymywania warstw nano-kompozytowych z wykorzystaniem techniki magnetronowej
Autorzy:
Morgiel, J.
Major, Ł.
Grzonka, J.
Mania, R.
Rakowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/258107.pdf
Data publikacji:
2006
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
nanokrystality
nanokompozyty
TiN/Si3N4
rozpylanie magnetronowe
nanocrystallites
nanocomposites
magnetron sputtering
Opis:
The TiN/Si3N4 coatings were deposited by reactive single target magnetron sputtering. The TiSi10 and TiSi6 targets were prepared from titanium and silicon elemental powders. The transmission electron microscopy helped to confirm the nanocomposite nanocrystalline TIN/ amorphous Si3N4 microstructure of coatings. The experiments helped to determine the critical coatings thickness at close to 1 žm. The micro-hardness of such coatings deposited on high speed steel was estimated at 11.9 - 13 GPa and characterized by critical loading in the range of 13 - 14 N. The measurements of chemical compositions of coatings showed that the ratio of silicon to titanium was at least twice as high as those in the targets, what might have lowered the coatings mechanical properties.
Powłoki TiN/Si3N4 naniesiono techniką rozpylania magnetronowego przy użyciu targetu o składzie TiSi10 lub TiSi6 (% at.). Targety te zostały przygotowane na drodze spiekania na gorąco proszków krzemu i tytanu. Analizę mikrostruktury nanokompozytowych nanokrystalicznych powłok TiN/Si3N4 o krytycznej grubości delaminacji zbliżonej do l žm, przeprowadzono przy użyciu mikroskopu transmisyjnego. Mikrotwardość powłok na podłożu ze stali szybkotnącej określono na poziomie 11.9 - 13 GPa. Analiza składu chemicznego powłok wykonana techniką EDS wykazała, że stosunek zawartości krzemu do tytanu jest dwa razy większy niż w targetach, co może stanowić przyczynę ich niższej od oczekiwań twardości.
Źródło:
Problemy Eksploatacji; 2006, 2; 33-42
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Evaluation of Mechanical Properties of High-tin Bronzes
Autorzy:
Nadolski, M.
Powiązania:
https://bibliotekanauki.pl/articles/381333.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
właściwości mechaniczne
brąz cynowy
dzwon
mikrostruktura
mechanical properties
tin bronzes
bell material
microstructure
Opis:
High-tin bronzes are used for church bells and concert bells (carillons). Therefore beside their decorative value, they should also offer other functional properties, including their permanence and good quality of sound. The latter is highly influenced by the structure of bell material, i.e. mostly by the presence of internal porosity which interferes with vibration of the bell waist and rim, and therefore should be eliminated. The presented investigations concerning the influence of tin content ranging from 20 to 24 wt% on mechanical properties of high-tin bronzes allowed to prove the increase in hardness of these alloys with simultaneous decrease in the tensile and the impact strengths (Rm and KV, respectively) for the increased tin content. Fractures of examined specimens, their porosity and microstructures were also assessed in order to explain the observed regularities. A reason of the change in the values of mechanical properties was revealed to be the change in the shape of α-phase crystals from dendritic to acicular one, and generation of grain structure related to the increased Sn content in the alloy.
Źródło:
Archives of Foundry Engineering; 2017, 17, 1; 127-130
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure of TiN/Hydroxyapatite Multilayers Deposited on Surface of NiTi Shape Memory Alloy
Struktura warstw TiN/hydroksyapatyt wytworzonych na powierzchni stopów NiTi wykazujących efekt pamięci kształtu
Autorzy:
Dudek, K.
Goryczka, T.
Wierzchoń, T.
Lelątko, J.
Powiązania:
https://bibliotekanauki.pl/articles/353974.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
NiTi
surface modification
glow discharge technique
TiN
hydroxyapatite
modyfikacja powierzchni
metoda jarzeniowa
hydroksyapatyt
Opis:
In order to improve a corrosion resistance and biocompatibility of NiTi shape memory alloys, the surface of the NiTi alloy was covered by protective layers. The paper presents results of the layers composed of titanium nitride and hydroxyapatite (HAp). The TiN layers were deposited using the glow discharge technique and then the bioactive hydroxyapatite layer was formed from simulated body fluids solution. The results of the structure studies and microscopic observations confirmed that on the surface of the NiTi alloy a thin titanium nitride layer 35-50 nm thick (depending on the glow discharge technique parameters) was obtained. The structure of the deposited layers was studied by means of the X-ray diffraction technique. Also, mechanical parameters of obtained layers were characterized using nanoindentation. On the top of the titanium nitride, a layer consisted of hydroxyapatite and NaCl was formed. Applied parameters of deposition process did not lead to decomposition of the NiTi parent phase (B2) to the equilibrium ones.
W celu poprawy właściwości korozyjnych, biokompatybilności oraz biofunkcjonalności stopów NiTi wykazujących efekt pamięci kształtu, stosuje się różne metody modyfikacji ich powierzchni. W prezentowanej pracy przedstawiono wyniki badań warstw powierzchniowych złożonych z azotków tytanu oraz hydroksyapatytu. Warstwy TiN zostały wytworzone przy użyciu metody jarzeniowej, a następnie na ich powierzchni został osadzony hydroksyapatyt z roztworu SBF. Wyniki przeprowadzonych badań strukturalnych oraz obserwacji mikroskopowych potwierdziły, że na powierzchni stopu NiTi wytworzyła się cienka warstwa azotku tytanu o grubości 35-50 nm (w zależności od zastosowanych parametrów procesu jarzeniowego). Z kolei na powierzchni warstwy azotowanej powstała warstwa składająca się z hydroksyapatytu oraz NaCl. Zastosowane parametry wytwarzania warstw nie doprowadziły do rozkładu fazy macierzystej stopu NiTi (B2) na fazy równowagowe. Fakt ten jest niezwykle istotny z uwagi na wystąpienie odwracalnej przemiany martenzytycznej oraz zjawiska pamięci kształtu.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 3A; 1777-1781
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sieciowanie kauczuku chloroprenowego tlenkiem cyny
Tin oxide cross-linking of chloroprene rubber
Autorzy:
Smejda-Krzewicka, A.
Rzymski, W. M.
Kowalski, D.
Powiązania:
https://bibliotekanauki.pl/articles/947344.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
kauczuk chloroprenowy
sieciowanie
tlenek cyny
palność
chloroprene rubber
cross-linking
tin oxide
flammability
Opis:
Przedstawiono nową metodę sieciowania kauczuku chloroprenowego (CR) za pomocą tlenku cyny (SnO). Najlepsze właściwości mechaniczne wykazały wulkanizaty usieciowane tlenkiem cyny w ilości 1—2 cz. mas./100 cz. mas. CR (phr), tj. zdecydowanie mniejszej niż ilości ZnO i MgO użyte do standardowego sieciowania CR. Stwierdzono, że wytrzymałość na rozciąganie wulkanizatu CR usieciowanego tlenkiem cyny jest większa niż wulkanizatu CR usieciowanego standardowo. Oznaczone wartości objętościowego pęcznienia równowagowego i stałych elastyczności świadczą o obecności większej liczby wiązań intermolekularnych. Wykazano, że wprowadzenie do mieszanki kauczukowej krzemionki lub sadzy zwiększyło wytrzymałość na rozciąganie wulkanizatu usieciowanego za pomocą 1 phr SnO, natomiast dodanie kaolinu — nieznacznie pogorszyło właściwości mechaniczne wulkanizatów, jednak wyraźnie zmniejszyło ich palność, o czym świadczy większa wartość wskaźnika tlenowego (OI).
A new method of cross-linking chloroprene rubber (CR) with tin oxide (SnO) is presented. From the viewpoint of the mechanical properties, the optimal SnO contentis between 1 and 2 phr of CR (Table 1, Fig. 1), i.e. definitely less than the amount of ZnO and MgO typically used in CR cross-linking. CR vulcanizate cured with tin oxide demonstrates significantly higher tensile strength than CR cross-linked using a conventional mixture of ZnO and MgO. The determined values of equilibrium volume swelling and Mooney-Rivlin elasticity constants indicate a greater number of intermolecular cross-links. It was found that the incorporation of silica or carbon black into CR leads to an increase in the tensile strength of the vulcanizate crosslinked with 1 phr SnO (Table 2). Although the addition of kaolin to CR cured with SnO results in a slight decrease in the mechanical properties of vulcanizates, it causes a marked reduction of their flammability, as indicated by increase in the oxygen index value (Fig. 2).
Źródło:
Polimery; 2015, 60, 3; 186-191
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Właściwości twardych powłok AlCrTiN/TiN osadzanych na podłożach ze stopu magnezu AZ91D metodą łukowo-próżniową z zastosowaniem pulsacyjnej polaryzacji podłoża
The properties of AlCrTiN/TiN hard coatings deposited on an AZ91D magnesium alloy by the cathodic arc deposition method using a pulse bias voltage
Autorzy:
Bujak, J.
Słomka, Z.
Powiązania:
https://bibliotekanauki.pl/articles/256486.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
pulsacyjna polaryzacja podłoży
powłoki wielowarstwowe AlCrTiN/TiN
metoda łukowo-próżniowa
morfologia
chropowatość
właściwości mechaniczne
adhezja
pulse bias voltage
multilayer AlCrTiN/TiN coatings
cathodic arc deposition method
morphology
roughness
mechanical properties
adhesion
Opis:
W artykule przedstawiono wyniki badania wpływu pulsacyjnej polaryzacji podłoża na wybrane właściwości wielowarstwowych powłok AlCrTiN/TiN, osadzanych metodą łukowo-próżniową na stopie odlewniczym o obniżonej odporności termicznej. Analiza wyników wykazała, że powłoki AlCrTiN/TiN osadzone na stopie AZ91D z zastosowaniem pulsacyjnej polaryzacji podłoża charakteryzują się - w porównaniu z powłokami wytworzonymi z wykorzystaniem stałego ujemnego napięcia polaryzacji - porównywalną lub wyższą twardością, adhezją oraz mniejszym zdefektowaniem powierzchni. Ponadto wykorzystanie pulsacyjnego napięcia polaryzacji pozwala obniżyć temperaturę pokrywanych podłoży nawet o 20%.
The authors present the results of testing an effect of pulse bias voltage on the selected properties of the multilayer AlCrTiN/TiN coatings, which were deposited by the cathodic arc process on a cast magnesium alloy having a lowered thermal resistance. The analysis of the results obtained shows that the AlCrTiN/TiN coatings deposited on the AZ91D alloy using a pulse bias voltage have a similar or higher hardness and adhesion also fewer surface defects when compared to coatings deposited applying a dc negative bias voltage. Moreover, for the cathodic arc deposition using pulse bias voltage, the temperature of the substrate can be reduced by even up to 20%.
Źródło:
Problemy Eksploatacji; 2013, 1; 113-125
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of amphiphilic compounds on membranes.
Autorzy:
Przestalski, Stanisław
Sarapuk, Janusz
Kleszczyńska, Halina
Gabrielska, Janina
Hładyszowski, Jerzy
Trela, Zenon
Kuczera, Janina
Powiązania:
https://bibliotekanauki.pl/articles/1044299.pdf
Data publikacji:
2000
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
monolayer
organic compounds of tin and lead
membrane lipids
quaternary ammonium salts
antioxidant
bilayer
Opis:
On the basis of Gortel & Grendel (J. Exp. Med., 1925, 41, 439-494) discovery, the importance of the lipid bilayer as an integral and indispensible component of the cell membrane is discussed. In particular, attention focuses on the interaction between membranes and amphiphilic substances. The effect on membranes of quaternary ammonium salts, both in the form of pesticides and oxidants as well as organic compounds of tin and lead are discussed in greater detail.
Źródło:
Acta Biochimica Polonica; 2000, 47, 3; 627-638
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of morphology and optical properties of SnO₂ nanowires prepared by electrospinning
Autorzy:
Tański, Tomasz
Smok, Weronika
Matysiak, Wiktor
Powiązania:
https://bibliotekanauki.pl/articles/2090673.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanowires
nanofibers
electrospinning
tin oxide
optical properties
nanodruty
nanowłókna
elektroprzędzenie
tlenek cyny
właściwości optyczne
Opis:
The growing interest in one-dimensional tin oxide-based nanomaterials boosts research on both high-quality nanomaterials as well as production methods. This is due to the fact that they present unique electrical and optical properties that enable their application in various (opto)electronic devices. Thus, the aim of the paper was to produce ceramic SnO₂ nanowires using electrospinning with the calcination method, and to investigate the influence of the calcination temperature on the morphology, structure and optical properties of the obtained material. A scanning electron microscope (SEM) and Fourier-transform infrared spectroscopy (FTIR) were used to examine the morphology and chemical structure of obtained nanomaterials. The optical properties of manufactured one-dimensional nanostructures were investigated using UV-Vis spectroscopy. Moreover, based on the UV-Vis spectra, the energy band gap of the prepared nanowires was determined. The analysis of the morphology of the obtained nanowires showed that both the concentration of the precursor in the spinning solution and the calcination temperature have a significant impact on the diameter of the nanowires and, consequently, on their optical properties.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 5; e137507, 1--8
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie grubości i szczelności powłoki cynowej w tubach ołowianych pocynowanych
Opredelenie tolshhiny i neprohicaemosti olovjanojj obolochki v svincovykhh tjubikakh pokrytykh olovom
Dosage de l'epaisseur et de l'etancheite de la couche interne d'etain dans des tubes de plomb etame
Autorzy:
Legatova, B.
Przybylski, E.
Krauze, S.
Powiązania:
https://bibliotekanauki.pl/articles/871605.pdf
Data publikacji:
1950
Wydawca:
Narodowy Instytut Zdrowia Publicznego. Państwowy Zakład Higieny
Tematy:
przemysl kosmetyczny
tuby opakowaniowe
powloki cynowe
pomiary grubosci
szczelnosc powlok
zawartosc olowiu
zawartosc cyny
preparaty kosmetyczne
cosmetic industry
packaging tube
tin coating
thickness measurement
tightness coating
lead content
tin content
cosmetic preparation
Źródło:
Roczniki Państwowego Zakładu Higieny; 1950, 01, 3-4
0035-7715
Pojawia się w:
Roczniki Państwowego Zakładu Higieny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Compacted Graphite Iron with the Addition of Tin
Autorzy:
Gumienny, G.
Kurowska, B.
Fabian, P.
Powiązania:
https://bibliotekanauki.pl/articles/947624.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
crystallization
graphite irons
tin
cooling curve
microstructure
krystalizacja
żeliwo grafitowe
cyna
krzywa chłodzenia
mikrostruktura
Opis:
The paper presents the effect of tin on the crystallization process, microstructure and hardness of cast iron with compacted (vermicular) graphite. The compacted graphite was obtained with the use of magnesium treatment process (Inmold technology). The lack of significant effect of tin on the temperature of the eutectic transformation has been demonstrated. On the other hand, a significant decrease in the eutectoid transformation temperature with increasing tin concentration has been shown. It was demonstrated that tin narrows the temperature range of the austenite transformation. The effect of tin on the microstructure of cast iron with compacted graphite considering casting wall thickness has been investigated and described. The carbide-forming effect of tin in thin-walled (3 mm) castings has been demonstrated. The nomograms describing the microstructure of compacted graphite iron versus tin concentration have been developed. The effect of tin on the hardness of cast iron was given.
Źródło:
Archives of Foundry Engineering; 2020, 20, 3; 15-20
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Joining Of Green Body And Dense Substrate For Indium Tin Oxide Under Uniaxial Pressure In An Open Condition
Łączenie zielonej masy i gęstego podłoża z tlenku cyny indu w warunkach jednoosiowego ściskania w stanie otwartym
Autorzy:
Moon, G.-S.
Chung, T.-J.
Yang, S. H.
Hong, G.-S.
Oh, K.-S.
Powiązania:
https://bibliotekanauki.pl/articles/355654.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
transparent conducting oxide
indium tin oxide
green body
joining
tlenek indu
zielona masa
łączenie
Opis:
The green body and dense substrate of indium tin oxide was joined by uniaxially pressing at 0.3 MPa at 1300°C to test the restoring of the eroded part of transparent conducting oxide target. The green body was sintered to 98% of theoretical density under the suppression of shrinkage along the boundary below 5%. The boundary between two parts was free of pore but could be recognized from the difference in grain sizes. The joined part had the virtually same density with the substrate, but the grain size was less than one fifth compared with that of substrate.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1209-1212
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of fluorine and tungsten co-doping on optical, electrical and structural properties of tin (IV) oxide thin films prepared by sol–gel spin coating method
Autorzy:
Keskenler, E F
Turgut, G
Aydin, S.
Dogan, S
Duzgun, B
Powiązania:
https://bibliotekanauki.pl/articles/175016.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
tin (IV) oxide (SnO2)
fluorine (F) and tungsten (W) co-doping
sol-gel
Opis:
Fluorine and tungsten co-doped tin (IV) oxide (WFTO) thin films have been prepared first time by a sol–gel spin coating method. The effect of F and W co-dopant ratio on optical, electrical and structural properties of SnO2 was investigated. It was found that the optical properties of the films were obviously affected by the co-dopant ratio. When the F:W co-dopant ratio increases from 0.25:0.25 to 0.75:0.50, the transmittance in the short wavelengths slightly increases and transmittance edge shifts towards shorter wavelength. With an increase in the co-dopant ratio, the reduction and red shifts in the optical transmittance edge are very obvious at all wavelengths. Transmittance values at 550 nm for the films have varied between 79.64% and 50.20%. The indirect and direct band gap values for WFTO-1, WFTO-2, WFTO-3 and WFTO-4 samples were calculated to be 3.73, 3.79, 3.48, 3.40 eV and 4.03, 4.04, 3.98, 3.97 eV, respectively. The crystal structure of the films has been investigated by X-ray diffraction patterns. It has been observed that WFTO-1 and WFTO-2 samples have (111) preferential orientation corresponding to SnO2 cubic phase. This orientation almost disappears and changes to tetragonal phase (110) orientation for WFTO-3 and WFTO-4. To the best of our knowledge, this is the first cubic structure observation for SnO2 grown by the sol–gel technique. The electrical properties were also changed with co-doping ratio. The best optical, electrical and structural properties were obtained for mole ratio 0.75:0.50 (F:W).
Źródło:
Optica Applicata; 2013, 43, 4; 663-677
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The study of local terrain modeling methods for vertical planning of the territory
Autorzy:
Trevoho, Ihor
Ostrovskiy, Apollinariy
Kolb, Ihor
Ostrovska, Olena
Zhyvchuk, Viacheslav
Powiązania:
https://bibliotekanauki.pl/articles/24526020.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
modelowanie terenu
triangulacja laserowa
zdjęcie lotnicze
DEM
RMSE
vertical planning
volume of earthworks
TIN
Opis:
This work aims to study the vertical planning method for the terrain area as part of the process of construction geodetic support. Such planning will be carried out based on the aerial survey data from UAVs, which allow the creation of a high-quality digital elevation model (DEM) with sufficient node density for reliable surface terrain modelling. During the study, we test the hypothesis of the possibility of using archival aerial photographs from UAVs to model the terrain of the local area. Both the actual achievable accuracy of terrain modeling in the course of photogrammetric processing of archived aerial photographs, and methods for creating a polygonal terrain model using input spatial data in the form of clouds of 3D points of a given density require analysis. To do this, we will perform comparisons of the accuracy of calculating earth masses, carried out based on the digital triangulation elevation models (TIN). These models were based on different algorithms for creating Delaunay triangulation with different degrees of 3D point sparsity.We proposed to use sparsity of dense clouds of points representing the surface of the terrain and which were obtained by the photogrammetric method. Computer terrain modelling and calculation of vertical planning parameters were performed by us for the area with flat terrain at angles up to 3.5 degrees. We evaluated the potential of archived UAV aerial photographs and algorithms for creating Delaunay triangulation at different densities of its nodes for calculating the volumes of earth masses.
Źródło:
Geodesy and Cartography; 2021, 70, 2; art. no. e09
2080-6736
2300-2581
Pojawia się w:
Geodesy and Cartography
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical And Experimental Analysis Of Fracture Of Athrombogenic Coatings Deposited On Ventricular Assist Device In Micro-Shear Test
Numeryczna i doświadczalna analiza pękania atrombogennych powłok nanoszonych na komory wspomagania pracy serca w próbie mikrościnania
Autorzy:
Kopernik, M.
Milenin, A.
Kąc, S.
Powiązania:
https://bibliotekanauki.pl/articles/354256.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
micro-shear test
finite element method (FEM)
fracture
ventricular assist device (VAD)
titanium nitride (TiN)
gold (Au)
próba mikrościnania
metoda elementów skończonych (MES)
pękanie
komora wspomagania pracy serca
azotek tytanu (TiN)
złoto (Au)
Opis:
The Polish left ventricular assist device (LVAD – RELIGA_EXT) will be made of thermoplastic polycarbonate-urethane (Bionate II) with deposited athrombogenic nano-coatings: gold (Au) and titanium nitride (TiN). Referring to the physical model, the two-scale model of LVAD developed in the previous works in the authors’ finite element code is composed of a macro-model of blood chamber and a micro-model of wall: TiN, Au and Bionate II. The numerical analysis of stress and strain states confirmed the possibility of fracture based on localization of zones of the biggest values of triaxiality factor. The introduction of Au interlayer between TiN and polymer improved the toughness of the connection, and increased the compressive residual stress in the coating what resulted in reduction of stress and strain close to the boundary between substrate and coating. However, the proper design of multilayer wall of the medical device requires the introduction of the real stress and strain states in the deposited coatings. The characteristics of TiN nano-coating such as residual stress, material model and fracture model were determined in the previously completed studies such as experimental and numercial nanoindentation tests, profilometry studies and in situ SEM’s micro-tension tests. The experimental in situ SEM’s micro-shear test was performed in the present paper and the corresponding numerical model of the test was also developed, and then, interpreted. The critical strains taken from experiment and considered as the effective strains in the model of test are the values which are the function of triaxiality factors for the tested samples. The developed in the authors’ FE code model of multilayer wall of VAD enriched with critical strain determined in the present paper enables prediction of fracture.
Polska lewa komora wspomagania pracy serca (LVAD – RELIGA_EXT) zostanie wykonana z termoplastycznego poliwęglano-uretanu (Bionate II) z naniesionymi atrombogennymi powłokami: złota (Au) i azotku tytanu (TiN). W odniesieniu do modelu fizycznego, dwuskalowy model komory LVAD opracowany we wcześniejszych pracach w autorskim kodzie elementów skończonch jest złożony z modelu makro czaszy krwistej i z mikro-modelu ściany: TiN, Au i Bionate II. Analiza numeryczna stanów naprężenia i odkształcenia potwierdziła prawdopodobieństwo pękania poprzez zlokalizowanie stref o największej wartości współczynnika naprężenia trójosiowego. Wprowadzenie międzywarstwy złota pomiędzy TiN i polimer poprawiło wytrzymałość tego połączenia i powiększyło ściskające naprężenie własne w powłoce, co doprowadziło do redukcji naprężenia i odkształcenia blisko granicy pomiędzy podłożem i powłoką. Jednakże, właściwy projekt wielowarstwowej ściany urządzenia medycznego wymaga wprowadzenia rzeczywistych stanów naprężeń i odkształceń w naniesionych powłokach. Charakterystyki powłok TiN takie jak naprężenie własne, model materiału i model pękania zostały określone we wcześniej wykonanych badaniach takich jak doświadczalne i numeryczne testy nanoindentacji, badania profilometryczne, i testy mikrorozciągania prowadzone pod elektronowym mikroskopem skaningowym. W niniejszej pracy przeprowadzono doświadczalny test mikrościnania pod skaningowym mikroskopem elektronowym, opracowano model numeryczny tego testu, a następnie go zinterpretowano. Odkształcenia krytyczne otrzymane z doświadczenia i określone w modelu testu jako intensywność odkształcenia są wartościami będącymi funkcją współczynników naprężeń trójosiowych dla badanych próbek. Opracowany w kodzie własnym model elementów skończonych wielowarstwowej ściany komory VAD wzbogacony o określone w niniejszej pracy odkształcenia krytyczne umożliwia przewidywanie pękania.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2A; 795-800
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Failure Strain and Strain-Stress Analysis in Titanium Nitride Coatings Deposited on Religa Heart Ext Ventricular Assist Device
Odkształcenie uszkodzenia i analiza odkształceniowo-naprężeniowa w powłokach azotku tytanu nanoszonych na komorę wspomagania pracy serca Religa Heart Ext
Autorzy:
Kopernik, M.
Powiązania:
https://bibliotekanauki.pl/articles/356873.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
titanium nitride (TiN)
left ventricular assist device
finite element method (FEM)
scanning electron microscopy (SEM)
micro-tensile test
azotek tytanu (TiN)
urządzenie wspomagania lewej komory (VAD)
metoda elementów skończonych
skaningowy mikroskop elektronowy
Opis:
The Polish ventricular assist device is made of Bionate II with deposited TiN biocompatible nano-coating. The two scale finite element model is composed of a macro-model of blood chamber and a micro-model of the TiN/Bionate II. The numerical analysis of stress and strain states confirmed the possibility of fracture. Therefore, the identification of a fracture parameter considered as a failure strain is the purpose of the present work. The tensile test in a micro chamber of the SEM was performed to calibrate the fracture parameter of the material system TiN/Bionate II. The failure strain is a function of a temperature, a thickness of coating and parameters of surface's profile. The failure strain was calculated at the stage of the test, in which the initiation of fracture occurred. The finite element micro-model includes the surface roughness and the failure strain under tension condition for two thicknesses of coatings which will be deposited on the medical device.
Polska komora wspomagania pracy serca jest wykonana z Bionate II z naniesioną biokompatybilną powłoką TiN. Dwu-skalowy model elementów skończonych składa się z modelu makro czaszy krwistej i z modelu mikro dla TiN/Bionate II. Numeryczna analiza stanów naprężeń i odkształceń potwierdza prawdopodobieństwo pękania. Zatem, identyfikacja parametru pękania rozpatrywanego jako odkształcenie uszkodzenia jest celem niniejszej pracy. Próba rozciągania w komorze SEM została przeprowadzona, aby skalibrować parametr pękania dla układu materiałowego TiN/Bionate II. Odkształcenie uszkodzenia jest funkcją temperatury, grubości powłoki i parametrów profilu powierzchni. Odkształcenie uszkodzenia zostało obliczone w tym etapie testu, w którym pojawiła się inicjacja pęknięcia. Mikro model elementów skończonych zawiera chropowatość powierzchni i odkształcenie uszkodzenia w warunkach rozciągania dla dwóch grubości powłok, które będą nanoszone w tym urządzeniu medycznym.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 1; 121-129
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Powłoka cynowa jako zabezpieczenie opakowań metalowych przeznaczonych do żywności
Tin coating as protection in foodstuff metal packaging
Autorzy:
Zalewska, A.
Kowalik, J.
Powiązania:
https://bibliotekanauki.pl/articles/2073376.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
opakowania produktów spożywczych
puszki metalowe
blacha cynowana
food packaging
metal cans
tin-plated metal sheet
Opis:
Poddano ocenie jakość powłoki cynowej w puszkach metalowych. Badano puszki po produktach spożywczych: puszki po rybie, brzoskwiniach i ananasie oraz z karmą dla zwierząt. Przeprowadzono analizę mikroskopową przy użyciu mikroskopu optycznego. Topografię powierzchni określono za pomocą mikroskopu konfokalnego. Stwierdzono wyraźne zmiany korozyjne na powierzchni cyny w puszce z przetworzonym ananasem oraz w puszce po karmie dla zwierząt.
A quality of tin coating in metal cans was tested. The cans of food products such a fish, peaches, pineapple and animal feed were studied. Microscopic tests were conducted using an optical microscope. A surface topography of the same was determined using a confocal microscope. The tin corrosion of pineapple and animal food was observed.
Źródło:
Inżynieria i Aparatura Chemiczna; 2017, 6; 224--225
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recovery Of Valuable Metals In Tin-Based Anodic Slimes By Carbothermic Reaction
Odzysk cennych metali ze szlamów anodowych na bazie Sn metodą reakcji karbotermicznej
Autorzy:
Han, C.
Kim, Y.-M.
Son, S. H.
Choi, H.
Kim, T. B.
Kim, Y. H.
Powiązania:
https://bibliotekanauki.pl/articles/352796.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tin
anodic slime
carbothermic reduction
carbon
recovery
cyna
szlam anodowy
reakcja karbotermiczna
węgiel
odzysk metali
Opis:
This study investigated the recovery of anodic slimes by carbothermic reaction in the temperature range of 973~1,273K and amount of carbon as a function of time. Tin anodic slime samples were collected from the bottom of the electrolytic cells during the electro-refining of tin. The anodic slimes are consisted of high concentrated tin, silver, copper and lead oxides. The kinetics of reduction were determined by means of the weight-loss measurement technique. In order to understand in detail of carbothermic reaction, thermodynamic calculation was carried out and compared with experiments. From thermodynamic calculation and experiment, it was confirmed that Sn-based anodic slime could be reduced by controlling temperature and amount of carbon. However, any tendency between the reduction temperature and carbon content for the reduction reaction was not observed.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1213-1216
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dye-sensitized solar cells based on sno2 nanorod and surface treatment with MG(II) film
Autorzy:
Bai, J.
Murakami, K.
Powiązania:
https://bibliotekanauki.pl/articles/384287.pdf
Data publikacji:
2009
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
dye-sensitized solar cell
tin dioxide film
nanorod
spray pyrolysis deposition
surface treatment
magnesium oxide
Opis:
Homocentrically grown SnO2 nanorods were synthesized by a hydrothermal method, whose diameter and length are around 20 nm and 100-200 nm, respectively. The photovoltaic properties of dye-sensitized SnO and MgO-treated SnO2 films were investigated. A light-to-electricity conversion yield of 0.8% was achieved by applying the nanorods as a thin film layer for the dye-sensitized solar cells. Treatment with MgO on SnO2 surface improves the photovoltage, fill factor and cell efficiency owing to preventing a recombination of the electrons injected into SnO with acceptors in the electrolyte.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2009, 3, 4; 69-71
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Solidification Rate on High-tin Bronze Microstructure
Autorzy:
Bartocha, D.
Baron, C.
Suchoń, J.
Powiązania:
https://bibliotekanauki.pl/articles/380563.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high-tin bronze
solidification rate
microstructure
bell’s tone
brąz wysokocynowy
szybkość krzepnięcia
mikrostruktura
dzwon
Opis:
The most important feature of bells is their sound. Their clarity and beauty depend, first of all, on the bell’s geometry - particularly the shape of its profile and the mechanical properties of alloy. Bells are the castings that work by emitting sound in as-cast state. Therefore all features that are created during melting, pouring, solidification and cooling processes will influence the bell's sound. The mechanical properties of bronze depend on the quality of alloy and microstructure which is created during solidification and depend on its kinetics. Hence, if the solidification parameters influence the alloy’s properties, how could they influence the frequencies of bell`s tone? Taking into account alterable thickness of bell's wall and differences in microstructure, the alloy's properties in bell could be important. In the article authors present the investigations conducted to determine the influence of cooling kinetics on microstructure of bronze with 20 weight % tin contents.
Źródło:
Archives of Foundry Engineering; 2019, 1; 89-97
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and Optoelectronic properties of Fluoride tin oxides/porous silicon/p-Silicon heterojunction
Autorzy:
Hadi, H. A.
Powiązania:
https://bibliotekanauki.pl/articles/411926.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
porous silicon
electrochemical etching
spray pyrolysis
fluoride-doped tin oxide film
nanostructures
SEM
AFM
photodetector
Opis:
In this paper, formation of a nanostructure semi transparence fluoride tin oxides (FTO) by spray pyrolysis technique on porous silicon PS layer. Porous silicon PS layer was prepared by anodization of p-type silicon wafers to fabricate of the UV- Visible Fluoride-doped tin oxide /Porous silicon /p-Si heterojunction photodetector. Optical properties of FTO thin films were measured. The optical band gap of 3.77 eV for SnO2 : F for film was deduced. From (I-V) and (C-V) measurements, the barrier ØB height for FTO/PS diode was of 0.77, and the built in voltage Vbi, which was of 0.95 V. External quantum efficiency was 55 % at 500 nm which corresponding to peak responsivity of 1.15 A/W at 1 V bias. The PS band gap in the vicinity of PS/c-Si heterojunction was 1.38 eV.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2014, 17, 2; 142-152
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Formation Mechanism for the TiN-MnS Complex Inclusions in Tire Cord Steel
Autorzy:
Lei, Jialiu
Wang, Xiumin
Zhao, Dongnan
Fu, Yongjun
Powiązania:
https://bibliotekanauki.pl/articles/1837727.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tire cord steel
thermodynamic calculations
inclusions
TiN-MnS
formation mechanism
kord stalowy
obliczenia termodynamiczne
inkluzje
Opis:
High strength tire cord steel is extensively used in radial ply tyres as the framework material, but the presence of brittle single titanium inclusions or complex titanium inclusions can cause failure of the wires and jeopardize their performance in production. In order to provide a key guidance on the control of titanium inclusions, it is necessary to clarify their formation mechanism during solidification. In the present work, the thermodynamic calculations were employed for an elaboration on their formation mechanism, combined with the industrial test. The TiN-MnS complex inclusions observed by SEM-EDS shows that the internal corresponds to TiN and the external is MnS. Thermodynamic calculations based on the microsegregation model indicate that MnS forms first, which can act as a nucleation site for the co-deposit of TiN in the mushy zone. As the MnS inclusions have a better deformation than that of TiN inclusions, then the TiN inclusions are wrapped by the MnS inclusions, generating TiN-MnS complex inclusions after rolling.
Źródło:
Archives of Foundry Engineering; 2021, 21, 2; 65-69
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dokumentacja rysunkowa sarkofagów królewskich z katedry na Wawelu ze zbiorów Muzeum Uniwersytetu Jagiellońskiego i jej wykorzystanie podczas prac konserwatorskich
Pictorial documentation of the Royal Sarcophagi from the Wawel Cathedral in the Jagiellonian University Museum Collection and its use during conservation work
Autorzy:
Kolendo-Korczak, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/2171368.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Jagielloński. Wydawnictwo Uniwersytetu Jagiellońskiego
Tematy:
sarkofagi cynowe
katedra na Wawelu
dokumentacja
konserwacja
Józef Łepkowski
tin sarcophagi
Wawel Cathedral
documentation
conservation
Opis:
In the 1870s, during renovation works in the crypts under the Wawel Cathedral, which were carried out in order to adapt them for visitors, a detailed inventory was created of the sarcophagi from the Royal Tombs. This documentation, which is now stored in the collections of the Jagiellonian University Museum, was initiated by Prof. Józef Łepkowski, a researcher of exceptional merit in the inventory and documentation of historical objects. Pencil drawings, watercolors and pencil frottages were made by Kraków painters and students of the School of Fine Arts. Each of the renovated coffins was meticulously documented in every detail and it also includes reproductions and frottages of memorial plaques. These materials constitute an invaluable base, both as an iconographic source for the art historian and for the conservator during conservation activities. They were used during the recent restoration and conservation of the metal royal sarcophagi carried out by the monument conservation workshop of Agnieszka and Tomasz Trzos. Analysis of the preserved iconographic sources collected by an art historian and of the material research performed by restorers permitted not only the reconstruction of the original color scheme of the royal sarcophagi, but also allowed the restoration of Sigismund II Augustus’ coffin to its primary form. The effects of this conservation work attest to the crucial role of a meticulously prepared documentation.
Źródło:
Opuscula Musealia; 2020, 27; 23-37
0239-9989
2084-3852
Pojawia się w:
Opuscula Musealia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie 3d budynków na potrzeby waloryzacji miejskiego krajobrazu z wykorzystaniem analiz widoczności na przykładzie Krakowa
3d building modelling too needs of the indexation of the urban landscape with using visibility analyses on the example of Cracow
Autorzy:
Piskorski, R.
Powiązania:
https://bibliotekanauki.pl/articles/104986.pdf
Data publikacji:
2017
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
lotniczy skaning laserowy
tin
obiekty multipatch
linia widoczności
airborne lasser scanning
multipatch feature
line of sight
Opis:
Ochrona walorów krajobrazowych w miastach, szczególnie w aspekcie uwzględnienia obiektów zabytkowych, jest istotnym problemem urbanistów i planistów przy kreowaniu sylwety miejskiej. W tego typu zagadnieniach często wykorzystuje się analizy widoczności, które pozwalają na symulację widoku z wybranego miejsca w oparciu o cyfrowe modele terenu (NMT) i jego pokrycia (NMPT). W związku z tym w pracy podjęto badania nad problemem modelowania 3d budynków w aspekcie optymalizacji tworzenia numerycznego modelu pokrycia terenu z wykorzystaniem danych pochodzących z lotniczego skaningu laserowego. Zaproponowano trzy warianty uwzględniania budynków w tego typu analizach: pierwszy bazujący na modelu nieregularnej siatki trójkątów (TIN) oraz dwa warianty wykorzystujące obiekty multipatch o różnym stopniu szczegółowości (LoD1 i quasi-LoD2). W procesie ich generowania wykorzystano informację pochodzącą ze sklasyfikowanej chmury punktów oraz obrysów budynków pochodzących z bazy BDOT10k. Pozostałe komponenty pokrycia terenu (głównie roślinność) oraz powierzchnię terenu uwzględniono w analizach w postaci modelu TIN. Jako obszar badawczy wybrano wzgórze Wawelskie, jedno z najbardziej charakterystycznych miejsc krakowskiego krajobrazu. Z wykorzystaniem algorytmu opartego na liniach widoczności (LoS) sprawdzono wpływ sposobu modelowania budynków na uzyskane wyniki analiz widoczności. W wyniku stwierdzono wyższość rozwiązań opartych na obiektach multipatch, głównie z powodu prostoty ich implementacji względem modelu TIN, bez utraty dokładności modeli budynków. Stwierdzono również, że szczegółowość takich obiektów nie wpływa w znaczny sposób na uzyskane wyniki, głównie ze względu na analizowanie dużego obszaru w trakcie analiz dotyczących oceny miejskiego krajobrazu.
Protecting landscape values in cities, especially in terms of taking into account historical monuments, is an important issue for urbanists and planners in creating urban silhouettes. In these types of issues, visibility analysis is often used to simulate a view from a selected location based on digital terrain models (DTM) and digital surface model (DSM). Therefore, work has been undertaken on the problem of 3d building modeling in the aspect of optimizing the digital surface model using airborne lasser scanning data. Three variants of building models have been proposed for this type of analysis: the first based on the triangulated irregular network model (TIN) and two variants using different type of detail multipatch objects (LoD1 and quasi-LoD2). In the process of generating them, information from the classified cloud of points and outlines of buildings from the BDOT10k topographic base was used. Other components of the land cover (mainly vegetation) and terrain surface were included in analysis as the TIN model. Wawel’s Hill, one of the most characteristic places of Krakow's landscape, was chosen as the research area. Using the line of sight algorithm, the impact of building modeling on the results of the visibility analysis was examined. As a result, the superiority of multipatch-based solutions was found, mainly because of the simplicity of their implementation with respect to the TIN model, without losing the accuracy of the building models. It has also been found that the specificity of such objects does not significantly affect the results obtained, mainly due to the large area analysis during urban landscape assessment studies.
Źródło:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury; 2017, 64, 4/I; 331-341
2300-5130
2300-8903
Pojawia się w:
Czasopismo Inżynierii Lądowej, Środowiska i Architektury
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Process Parameters on Exudation Thickness in Continuous Unidirectional Solidification Tin Bronze Alloy
Autorzy:
Jihui, Luo
Fang, He
Powiązania:
https://bibliotekanauki.pl/articles/382552.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
unidirectional solidification
Tin bronze alloy
orthogonal experiment
exudation
krzepnięcie jednokierunkowe
stop cynowo-brązowy
eksperyment ortogonalny
wysięki
Opis:
The exudation layer seriously affects the properties and the surface finish of the tin bronze alloy. The effective control of the exudation thickness is important measure for improving the properties of the alloy. In order to study the influence of process parameters on the thickness of exudate layer, the tin bronze alloy was prepared by continuous unidirectional solidification technology at different process parameters. The microstructure of the continuous unidirectional solidification tin bronze alloy was analyzed. The effect of process parameters on microstructure and chemical compositions was studied by orthogonal experiment. The results show that there exists an exudation layer on the surface of the continuous unidirectional solidification tin bronze alloy, and the exudation is mainly composed of a tin-rich precipitated phase. It indicates that the continuous casting speed is the main factor affecting the thickness of exudation layer, followed by mold temperature, melt temperature, cooling water temperature and cooling distance.
Źródło:
Archives of Foundry Engineering; 2019, 2; 97-100
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of the Change in the Tin Concentration in Bronzes to the Basic Components of the Sound of Bells
Autorzy:
Cekus, Dawid
Nadolski, Maciej
Powiązania:
https://bibliotekanauki.pl/articles/2049724.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high-tin bronze
components of the sound of bell
frequency analysis
mechanical properties
velocity of sound
Opis:
The subject of the study was to determine the impact of changes in mechanical properties of high-tin bronzes on the basic components of the sound of a bell. Change in the tin concentration in the range of about 7.5 to 20 parts wt. in a casting alloy significantly affects the mechanical properties of the alloy such as Young’s modulus or hardness. The free vibrations of bells were obtained with the help of the finite element method. In the numerical analyses the mechanical properties of standard alloys were adopted. The obtained natural frequencies of the bell made of a bronze with different tin concentration in copper were compared with the acoustic properties of a real bell casted on the basis of the same ribs. A significant effect of the increase in the alloying share of tin on the obtained results was stated. In addition, the acoustic analysis of aluminum bronze C95500 have been performed. Based on the obtained results, authors stated that this material can replace the commonly used high tin bronze C91300 for the unit production of bells.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 2; 531-535
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research of Aluminium Influence on Tin Bronzes
Autorzy:
Rzadkosz, S.
Garbacz-Klempka, A.
Kozana, J.
Piękoś, M.
Czekaj, E.
Perek-Nowak, M.
Powiązania:
https://bibliotekanauki.pl/articles/382669.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
durable alloys
tin bronzes
mechanical properties
metallography
microstructure
trwałość stopów
brązy cynowe
właściwości mechaniczne
metalografia
mikrostruktury
Opis:
During the research a group of copper and tin alloys was investigated. The influence of variable additions of aluminium within the range of 0.3 – 1.4 wt % was analysed on tin bronze CuSn10 with the aim of obtaining durable bronzes, from outside the normalized copper alloy groups. Melts were conducted in order to obtain alloy samples for testing the chosen properties. Metallographic and SEM-EDS tests were carried out to determine the microstructure changes caused by introducing Al addition to CuSn10 alloy. Also, chosen mechanical properties were tested for the alloys investigated. The results showed considerable changes in the microstructure as well as significant hardening of the Cu-Sn alloys as the result of aluminium addition. The thermal and dilatometric analysis confirmed the presence of phase changes, also their parameters were assessed depending on the share of aluminium addition in the CuSn10. The aluminium additive applied within the range of 0.3-1.4 wt% to CuSn10 bronze clearly impacted the microstructure and the strength properties analysed, causing the increase in strength and hardness with simultaneous insignificant decrease of elongation of the CuSn10Al alloys.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1 spec.; 93-98
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Tin Bronze Melting and Pouring Parameters on Its Properties and Bells’ Tone
Autorzy:
Bartocha, D.
Baron, C.
Powiązania:
https://bibliotekanauki.pl/articles/382015.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tin bronze
melting parameters
pouring parameters
bell’s tone
brąz cynowy
parametry wytapiania
parametry zalewania
ton dzwonu
Opis:
The most important feature of bells is their sound. Its clarity and beauty depend, first of all, on the bell’s geometry - particularly the shape of its profile, but also on the quality of alloy used to its cast. Hence, if the melting and pouring parameters could influence the alloy’s properties, what influence they would have on the frequencies of bell’s tone. In the article authors present their own approaches to find answers on that and more questions.
Źródło:
Archives of Foundry Engineering; 2016, 16, 4; 17-22
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies