Skocz do pozycji: 1.

Tytuł:

Numerical Simulations of the Effects of Droplet Size and Concentration on Vapour-Droplet JP-10/Air Detonations

Autorzy:

Liu, L.
Zhang, Q.

Powiązania:

https://bibliotekanauki.pl/articles/358150.pdf

Data publikacji:

2018

Wydawca:

Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego

Tematy:

multiphase detonation
discrete phase model
evaporation and breakup model
droplet size effect
initial concentration effect

Opis:

Two-dimensional simulations were conducted for JP-10 mono-dispersed vapour-droplet detonation in air, based on the detonation mechanism for clouds and validation of the extending critical droplet size limits in previous tests. In the simulations, the discrete phase model combined with the droplet evaporation and droplet breakup models was used. Utilizing a wide range of mono-dispersed droplet sizes and initial droplet concentrations, all cases of JP-10 droplets with a certain amount of pre-vaporized fuel can successfully achieve the deflagration to detonation transition. Detonation velocities at the equivalent concentration with droplet diameters no larger than 50 μm are in good agreement with the theoretical detonation velocities. The effects of droplet size and initial droplet concentration on the detonation behaviour were also investigated. Detonation velocities attained with droplet diameters below 50 μm appear to decrease very slightly with droplet size, but are almost equal to the velocity in gases. When the droplet diameter is above 50 μm, there is a decrease in simulated detonation velocity compared with fine droplets, and no secondary pressure peak was observed. For fuel-rich combustion, detonation velocities decrease rapidly with an increase in initial droplet concentration, and post-wave pressure fluctuation was obviously irregular, caused by the secondary local explosion of the droplets.

Źródło:

Central European Journal of Energetic Materials; 2018, 15, 1; 175-190
1733-7178

Pojawia się w:

Central European Journal of Energetic Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 2.

Tytuł:

Explosion Parameters of Gaseous JP-10/Air Mixtures

Autorzy:

Zhang, Q.
Liu, X.

Powiązania:

https://bibliotekanauki.pl/articles/358896.pdf

Data publikacji:

2016

Wydawca:

Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego

Tematy:

JP-10
fuels
decane
explosion pressure
explosible limits

Opis:

This paper describes flammability measurements and data on the missile fuel, JP-10. The measurements include maximum explosion pressure, maximum rate of pressure rise and limiting flammability concentrations. Through a series experiments, the influences of the concentration of gaseous JP-10 in air on the explosion pressure and on the rate of explosion pressure rise have been analyzed, and the results are discussed. The explosion pressure of gaseous JP-10/air mixtures reached their highest values within the studied range at a concentration of 1.88%. The variation trends in the explosion pressure and the rate of pressure rise of gaseous JP-10/air mixtures with volume % appear similar. When the volume % of gaseous JP-10 lies in the range 0.5-1.8%, the explosion pressure and the rate of pressure rise for gaseous JP-10/air mixtures increase with the volume %, while in the range 1.8-5% these parameters decrease with the volume %. The flammability limits of gaseous JP-10/air mixtures are near those of gaseous n-decane/air mixtures. However, the maximum explosion pressure and the maximum rate of pressure rise of gaseous JP-10/air mixtures are much higher than those of gaseous n-decane/air mixtures.

Źródło:

Central European Journal of Energetic Materials; 2016, 13, 1; 261-270
1733-7178

Pojawia się w:

Central European Journal of Energetic Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 3.

Tytuł:

Sensitivity analysis of Kozeny-Carman and Ergun equations

Autorzy:

Sobieski, W.
Zhang, Q.

Powiązania:

https://bibliotekanauki.pl/articles/297987.pdf

Data publikacji:

2014

Wydawca:

Uniwersytet Warmińsko-Mazurski w Olsztynie

Tematy:

porous media
Kozeny-Carman
Ergun
porosity
tortuosity

Opis:

In the article a sensitivity analysis of linear and nonlinear terms in the Kozeny-Carman and Ergun equations was shown. In the first case the impact of the porosity, tortuosity, specific surface of the porous body and the model constant was investigated. In the second case the porosity, the particle diameter and the sphericity function were taken into account. To express the model sensitivity by numbers, an earlier developed method was used. In this way the order and the importance of the impact of individual parameters was determined. The motivations to create this article were questions, which occurred during developing a novel investigation method, linking the Discrete Element Method and the CFD techniques. The first aim was to predict what will happen, if individual parameters will be set with an error: which data should be set as accurately as possible and which data are not very important for the result value. The second intention was to state which of parameters used in porous media investigations should be expressed by functions and which by constant values. The article may be treated as set of pointers helping in using of Kozeny-Carman and Ergun laws or as an example of research methodology based on the sensitivity analysis.

Źródło:

Technical Sciences / University of Warmia and Mazury in Olsztyn; 2014, 17(3); 235-248
1505-4675
2083-4527

Pojawia się w:

Technical Sciences / University of Warmia and Mazury in Olsztyn

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 4.

Tytuł:

Interaction between Polymer Brush and Nanoparticle: Brownian Dynamics Investigation

Autorzy:

Zhang, Q.
Xiang, X.

Powiązania:

https://bibliotekanauki.pl/articles/1400121.pdf

Data publikacji:

2013-04

Wydawca:

Polska Akademia Nauk. Instytut Fizyki PAN

Tematy:

05.45.Xt
05.45.Jn

Opis:

We use Brownian dynamics simulations to study the adsorption behavior of a nanosized particle on polymer brushes. The adsorption process, the dynamic behavior of the nanoparticle in brush, the penetration depth, and the diffusion coefficient of the nanoparticle in different depths of the brush are all investigated for different grafting densities. We provide an area density Γp, which is the area average of the monomer number above the embedded nanoparticle in brush. We find that this area density explains well qualitatively the experimental phenomenon that the nanoparticles exhibit a maximum in the adsorbed amount as a function of the grafting density of brush.

Źródło:

Acta Physica Polonica A; 2013, 123, 4; 642-646
0587-4246
1898-794X

Pojawia się w:

Acta Physica Polonica A

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 5.

Tytuł:

Prediction of Detonation Pressure and Velocity of Explosives with Micrometer Aluminum Powders

Autorzy:

Zhang, Q.
Chang, Y.

Powiązania:

https://bibliotekanauki.pl/articles/358334.pdf

Data publikacji:

2012

Wydawca:

Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego

Tematy:

aluminized explosives
detonation pressure
nonideal explosives
detonation velocity

Opis:

The data reported shows that the Chapman-Jouguet (CJ) detonation parameters of non-ideal explosives calculated from existing thermodynamic computer codes are significantly different from experimental results. We use CJ detonation theory to present a new approach predicting detonation pressure and velocity of aluminized explosives by thermodynamic detonation theory. There is no need to use the assumption of full and partial equilibrium of aluminum powder in reaction zones in the new approach. In this work the best agreement with experimental data was obtained by adjusting the parameter k in the Becker- Kistiakosky-Wilson equations of state (BKW-EOS). The detonation pressure and velocity values calculated by the present method agree well with the experimental results. All of the deviations for the calculated pressures of aluminized explosives are less than 9% and those for the detonation velocities are less than 7%.

Źródło:

Central European Journal of Energetic Materials; 2012, 9, 1; 77-86
1733-7178

Pojawia się w:

Central European Journal of Energetic Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 6.

Tytuł:

A Predictive Method for the Heat of Explosion of Non-ideal Aluminized Explosives

Autorzy:

Zhang, Q.
Chang, Y.

Powiązania:

https://bibliotekanauki.pl/articles/358737.pdf

Data publikacji:

2013

Wydawca:

Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego

Tematy:

aluminized explosives
heat of explosion
thermodynamic
nonideal explosives
high energy materials

Opis:

The heat of explosion is one of the most important thermodynamic parameters of aluminized explosives. Two improvements in numerical calculations to predict the behaviour of the explosion of non-ideal aluminized explosives were completed in this work. The chemical reaction between aluminum and the C-J detonation products of high energy ingredients was determined and the equation of state for the detonation products of high energy ingredients was revised. The constant k in the BKW equation was revised to obtain perfect results for predicting the C-J parameters for high energy ingredients. The predicted results show that the heats and temperatures of aluminized explosives become maximized when the mass fraction of aluminum powder is 30%, which is in good agreement with the results obtained by empirical formulae.

Źródło:

Central European Journal of Energetic Materials; 2013, 10, 4; 541-554
1733-7178

Pojawia się w:

Central European Journal of Energetic Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 7.

Tytuł:

Morphology Transformation of a Polymeric Micelle Induced by Two Encapsulated Particles

Autorzy:

Zhang, Q.
Xiang, X.

Powiązania:

https://bibliotekanauki.pl/articles/1377854.pdf

Data publikacji:

2014-12

Wydawca:

Polska Akademia Nauk. Instytut Fizyki PAN

Tematy:

82.35.Np
82.35.Jk

Opis:

We begin with a pair of spherical particles encapsulated in a micelle and solve the problem within the self-consistent field theory to investigate the morphology transformation of the micelle induced by two nano-particles. The micelles are based on amphiphilic diblock copolymer AB in homopolymer A solvents. The nano-particles are simple models of proteins or colloids. We predict different micelle structures, and relate these morphologies to particle sizes, distances between two particles, and chemical potentials of the amphiphile molecules. There are found complex structures of the micelle induced by the twin particles: many reverse micelles only with even numbers or only one micelle attached at one of the two particles. These results are of immediate interests to the interactions of micelles and particles, as well as to the transitions between vesicles and micelles.

Źródło:

Acta Physica Polonica A; 2014, 126, 6; 1338-1342
0587-4246
1898-794X

Pojawia się w:

Acta Physica Polonica A

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 8.

Tytuł:

Numerical modeling of hydrodynamic and sediment siltation due to typhoon in estuary channel regulation

Autorzy:

Zhao, H.
Zhang, Q.
Xie, M.

Powiązania:

https://bibliotekanauki.pl/articles/259087.pdf

Data publikacji:

2015

Wydawca:

Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa

Tematy:

Oujiang Estuary
numerical model
channel regulation
sediment siltation
typhoon

Opis:

Oujiang Estuary is a complex tidal estuary with many channels and shoals in the East China Sea, which was affected by typhoon frequently. The navigation channel of Wenzhou Port is located in the north branch of Oujiang Estuary, which happened serious sediment siltation in many times due to typhoon impact. The regulation is considered to decrease siltaion of the channel and protect shoals as well. According to the site survey data, the mathematic model is established and validated, which simulates the hydrodynamic, sediment transport and channel siltation due to typhoon in Oujiang Estuary. The channel regulation scenario is studied by the model simulation after analysis of the silation character. It indicates that the high concentration sediment from shoals north of channel is main sediment source caused siltation in the channel, which can be prevented into the channel by the regulation scenario and decrease siltation efficiently.

Źródło:

Polish Maritime Research; 2015, S 1; 61-66
1233-2585

Pojawia się w:

Polish Maritime Research

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 9.

Tytuł:

Fatigue damage of V-lock chain ring under random load

Autorzy:

Zhang, Q.
Wang, H.
Guo, T.

Powiązania:

https://bibliotekanauki.pl/articles/259449.pdf

Data publikacji:

2016

Wydawca:

Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa

Tematy:

V-lock chain ring for mining
dynamic model
fatigue damage
random load
finite element
sensitivity analysis

Opis:

To study the influence of the random load on the V-lock chain ring for mining, the numerical simulation technology is used. The dynamic tension is obtained by using the dynamic model of the plough. The life and damage nephograms are obtained by using ANSYS Workbench. The analysis results show that the short fatigue life region of the V-lock chain ring for mining is mainly concentrated on the transition region between the medial straight edge and arc, and the fatigue damage of the link chain on the side of the motion direction of the plow head is larger than that on the other side. This link chain has strong anti-fatigue performance.

Źródło:

Polish Maritime Research; 2016, S 1; 4-9
1233-2585

Pojawia się w:

Polish Maritime Research

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 10.

Tytuł:

Existence and exponential stability of a periodic solution for fuzzy cellular neural networks with time-varying delays

Autorzy:

Zhang, Q.
Yang, L.
Liao, D.

Powiązania:

https://bibliotekanauki.pl/articles/930186.pdf

Data publikacji:

2011

Wydawca:

Uniwersytet Zielonogórski. Oficyna Wydawnicza

Tematy:

sieć neuronowa
stateczność wykładnicza
rozwiązanie okresowe
fuzzy cellular neural networks
global exponential stability
periodic solution
coincidence degree

Opis:

Fuzzy cellular neural networks with time-varying delays are considered. Some sufficient conditions for the existence and exponential stability of periodic solutions are obtained by using the continuation theorem based on the coincidence degree and the differential inequality technique. The sufficient conditions are easy to use in pattern recognition and automatic control. Finally, an example is given to show the feasibility and effectiveness of our methods.

Źródło:

International Journal of Applied Mathematics and Computer Science; 2011, 21, 4; 649-658
1641-876X
2083-8492

Pojawia się w:

International Journal of Applied Mathematics and Computer Science

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 11.

Tytuł:

An improved space vector modulation strategy for common-mode voltage reduction in matrix rectifier

Autorzy:

Liu, X.
Zhang, Q.
Hou, D.

Powiązania:

https://bibliotekanauki.pl/articles/950664.pdf

Data publikacji:

2014

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

matrix converter
space vector modulation
common-mode voltage

Opis:

The matrix rectifier modulated by the classical space vector modulation (SVM) strategy generates common-mode voltage (CMV). The high magnitude and high du/dt of the CMV causes serious problems such as motor damage, electromagnetic noise and many others. In this paper, an improved SVM strategy is proposed by replacing the zero vectors with suitable couple of active ones that substantially eliminate the CMV. Theoretical analysis proves that the proposed strategy can reduce the amplitude of the CMV to half of the original value. In addition, the quality of the input and output waveforms is not affected by extra active vectors. Simulation and experimental results demonstrate the feasibility and effectiveness of the proposed strategy are shown.

Źródło:

Archives of Electrical Engineering; 2014, 63, 1; 93-106
1427-4221
2300-2506

Pojawia się w:

Archives of Electrical Engineering

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 12.

Tytuł:

Removal of clofibric acid and diclofenac during anaerobic digestion of sewage sludge

Autorzy:

Zhou, H.
Zhang, Q.
Zhang, Q
Ma, L.
Tu, B.
Li, H.
Zhou, Y.

Powiązania:

https://bibliotekanauki.pl/articles/207894.pdf

Data publikacji:

2013

Wydawca:

Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej

Tematy:

fermentacja beztlenowa
osady ściekowe
farmaceutyki
kwas klofibrowy
diklofenak
anaerobic digestion
sewage sludge
pharmaceuticals
clofibric acid
diclofenac

Opis:

Removal of two acidic pharmaceuticals, clofibric acid and diclofenac, present in sewage sludge using two kinds of anaerobic digestions was investigated. The effective isolation and purification pretreatment to extract the target compounds from the sewage sludge samples was firstly established, followed by gas chromatography-mass spectrometry (GC-MS) analysis to identify and quantify them. Under mesophilic conditions, the removal efficiencies for clofibric acid and diclofenac with the initial concentrations of 5 μg /dm3 were up to 95% and 97%. After thermophilic anaerobic digestion, the removal efficiency could be increased to 99.3% for clofibric acid, however, it did not increase for diclofenac. In general, anaerobic digestion could effectively remove the target compounds from the sewage sludge (all above 90%).

Źródło:

Environment Protection Engineering; 2013, 39, 4; 63-77
0324-8828

Pojawia się w:

Environment Protection Engineering

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 13.

Tytuł:

Effect of provenance and water stress on biomass and polyphyllin content in the medicinal plant Paris polyphylla Smith var. yunnanensis

Autorzy:

Wu, X.
Zuo, .
Zhang, Q.
Wang, Y.

Powiązania:

https://bibliotekanauki.pl/articles/12304075.pdf

Data publikacji:

2019

Wydawca:

Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie

Tematy:

plant cultivation
Paris polyphylla
medicinal plant
herbal plant
water stress
biomass
polyphyllin content

Opis:

Water stress and provenance could affect the secondary metabolites synthesis and accumulation in herbs. Thus, this study explored the effect of soil water moisture and provenance on the growth of Paris polyphylla Smith var. yunnanensis (PPY). Three provenances (Jinping, Luquan and Weixi in Yunnan, China) of PPY samples were grown in different soil water moisture conditions [0.80, 0.70 and 0.50 field capacity (FC)] during Dec. 2015 to Sep. 2017. Results showed that the highest biomass weight was presented in 0.70 FC for Luquan and Weixi samples. Biomass weight for Jinping provenance presented a decreasing tendency with the decreased soil water moisture and the highest biomass were shown in 0.80 FC. However, quantitative analysis revealed that the total content of polyphyllin increased with decreasing the soil water moisture for Jinping and Weixi samples. The highest total content of polyphyllin in rhizome was inclined to show in Jinping samples, while the stem and leaf tissues were shown in Weixi samples. Additionally, results of ANOVA combined with PCA indicated that the difference among these three provenances were significant. Correlation analysis results revealed that 0.50 FC induced the competitive relationship occurrence for polyphyllin distribution. Thus, 0.70 FC was the most suitable soil-water condition for PPY growth. Besides, provenance collected from Jinping could consider as a good quality germplasm. Consequently, this study might provide a preliminary foundation for irrigation project formulated and provenance screened for PPY cultivation.

Źródło:

Acta Scientiarum Polonorum. Hortorum Cultus; 2019, 18, 2; 171-191
1644-0692

Pojawia się w:

Acta Scientiarum Polonorum. Hortorum Cultus

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 14.

Tytuł:

Band gap properties of periodic tapered beam structure using traveling wave method

Autorzy:

Li, T.
Ma, X.
Zhang, Q.
Wang, Z.

Powiązania:

https://bibliotekanauki.pl/articles/279452.pdf

Data publikacji:

2016

Wydawca:

Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej

Tematy:

band gap
periodic structure
traveling wave method
Bloch theorem
tapered beam

Opis:

The wave motion equations of a tapered beam with respect to axial, torsional and flexural deformations are deduced including the transmission and waveguide equations. Combining the force equilibrium and displacement coordination conditions at the junction, we obtain the relation between the wavenumber and frequency, and the band gap properties of periodic tapered beam structures by the Bloch theorem. The modeling accuracy and efficiency of the traveling wave method are verified by the finite element method. The band gap properties of periodic tampered and uniform beam structures are analyzed and compared for the same materials and lengths as well as the same volumes.

Źródło:

Journal of Theoretical and Applied Mechanics; 2016, 54, 4; 1297-1308
1429-2955

Pojawia się w:

Journal of Theoretical and Applied Mechanics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 15.

Tytuł:

Experimental Evidence for Jahn-Teller Transition in a Fe(II)Fe(III) Bimetallic Oxalate

Autorzy:

Tang, G.
He, Y.
Xu, F.
Zhang, Q.

Powiązania:

https://bibliotekanauki.pl/articles/1400401.pdf

Data publikacji:

2013-01

Wydawca:

Polska Akademia Nauk. Instytut Fizyki PAN

Tematy:

75.50.Xx
76.80.+y

Opis:

Bimetallic oxalate ${[N-(n-C_4H_9)_4][FeFe(C_2O_4)_3]}_{n}$ has been investigated by the Mössbauer spectroscopy. The Mössbauer studies confirm that high-spin Fe(III) (S=5/2) and Fe(II) (S=2) ions are present in the compound. These spectra above 60 K consist of three quadrupole doublets, indicating that there are three different Fe sites in the material. The Mössbauer results reveal that spontaneous magnetization of Fe(II) sublattices increases more steeply than that of Fe(III) sublattices as the temperature decreases from $T_{C}$. Great increase of quadrupole splitting at 50 K provides compelling evidence for the predicted Jahn-Teller transition.

Źródło:

Acta Physica Polonica A; 2013, 123, 1; 118-120
0587-4246
1898-794X

Pojawia się w:

Acta Physica Polonica A

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 16.

Tytuł:

Study of all-optical logic XOR gate based on linear optical amplifier cross-gain modulation

Autorzy:

Li, X
Jin, J
Li, H
Zhang, Q

Powiązania:

https://bibliotekanauki.pl/articles/174514.pdf

Data publikacji:

2015

Wydawca:

Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej

Tematy:

linear optical amplifier
cross-gain modulation
XOR gate

Opis:

All-optical logic is the key to future high speed and large capacity optical transmission, the realization of optical packet switching and optical computing, and it has a very profound influence on the development of future optical communication. A linear optical amplifier as a new type of semiconductor optical amplifier, which has a good gain characteristic, has better signal performance than a traditional semiconductor optical amplifier in the wavelength conversion. This article presents a numerical simulation model of all-optical logic XOR gate and its logic operation based on cross-gain modulation of linear optical amplifier, and has also completed some of the basic logic operations, including AND, OR, NOT operations.

Źródło:

Optica Applicata; 2015, 45, 4; 447-457
0078-5466
1899-7015

Pojawia się w:

Optica Applicata

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 17.

Tytuł:

Population diversity maintenance in brain storm optimization algorithm

Autorzy:

Cheng, S.
Shi, Y.
Qin, Q.
Zhang, Q
Bai, R.

Powiązania:

https://bibliotekanauki.pl/articles/91571.pdf

Data publikacji:

2014

Wydawca:

Społeczna Akademia Nauk w Łodzi. Polskie Towarzystwo Sieci Neuronowych

Tematy:

brainstorm
optimization algorithm
convergence
divergence
brainstorm optimization
BSO
swarm intelligence
BSO algorithm

Opis:

The convergence and divergence are two common phenomena in swarm intelligence. To obtain good search results, the algorithm should have a balance on convergence and divergence. The premature convergence happens partially due to the solutions getting clustered together, and not diverging again. The brain storm optimization (BSO), which is a young and promising algorithm in swarm intelligence, is based on the collective behavior of human being, that is, the brainstorming process. The convergence strategy is utilized in BSO algorithm to exploit search areas may contain good solutions. The new solutions are generated by divergence strategy to explore new search areas. Premature convergence also happens in the BSO algorithm. The solutions get clustered after a few iterations, which indicate that the population diversity decreases quickly during the search. A definition of population diversity in BSO algorithm is introduced in this paper to measure the change of solutions’ distribution. The algorithm’s exploration and exploitation ability can be measured based on the change of population diversity. Different kinds of partial reinitialization strategies are utilized to improve the population diversity in BSO algorithm. The experimental results show that the performance of the BSO is improved by part of solutions re-initialization strategies.

Źródło:

Journal of Artificial Intelligence and Soft Computing Research; 2014, 4, 2; 83-97
2083-2567
2449-6499

Pojawia się w:

Journal of Artificial Intelligence and Soft Computing Research

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 18.

Tytuł:

Growth, proline content and proline-associated gene expression of autotetraploid Betula platyphylla responding to NaHCO3 stress

Autorzy:

Mu, H.
Lin, L.
Zhang, Q.
Tang, X.
Zhang, X.
Cheng, G.

Powiązania:

https://bibliotekanauki.pl/articles/41683.pdf

Data publikacji:

2016

Wydawca:

Polska Akademia Nauk. Instytut Dendrologii PAN

Tematy:

plant growth
proline content
stress response
gene expression
autotetraploid
Betula platyphylla
birch
Sodium bicarbonate
plant stress

Opis:

Plant breeders have focused much attention on polyploid trees because of their resistance for forestry. To evaluate the impact of intraspecies genome duplication on NaHCO3 stress, a series of Betula platyphylla autotetraploids and diploids were generated from the same family. The growth, proline content and proline-associated gene expression of these autotetraploid individuals were compared with those diploid trees. Autotetraploids were superior in injury index and relative growth of height and base diameter compared to diploids. The proline content was higher in autotetraploid individuals compared to diploids. Gene expression data revealed autotetraploids were generally higher expression in BpP5CS1, BpP5CS2, Bp- P5CR1, BpP5CR2, BpP5CR3 and BpOAT and were lower expression in BpProDH and BpP5CDH compared to diploid trees. These results shed light on resistance variation in birch autotetraploidization and polyploidy breeding as a new approach for genetic improvement of birch trees.

Źródło:

Dendrobiology; 2016, 75
1641-1307

Pojawia się w:

Dendrobiology

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 19.

Tytuł:

Preparation and cytological study of collagen/nano-hydroxyapatite/graphene oxide composites

Autorzy:

Wang, J.
Wang, Y.
Liu, D.
Yang, Q.
Huang, C.
Yang, C.
Zhang, Q.

Powiązania:

https://bibliotekanauki.pl/articles/307450.pdf

Data publikacji:

2018

Wydawca:

Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej

Tematy:

nanohydroksyapatyt
tlenek grafitu
mineralizacja
kolagen
nano-hydroxyapatite
graphene oxide
biomimetic mineralization
collagen

Opis:

Biomimetic mineralized composite scaffolds are widely used as natural bone substitute materials in tissue engineering by inducing and assembling bonelike apatite. In this study, the single lamellar structure of graphene oxide (GO) powder was prepared via an improved Hummers’ method. Methods: To better mimic natural bone, the collagen (COL)/Nano-hydroxyapatite (nHA)/graphene oxide (GO) composite material was prepared by simulated body fluid (SBF) method using COL/GO as a matrix template. Hydroxyapatite (HA) with calcium ion deficiency was achieved via biomimetic mineralization, and it had properties closer to those of natural bone than pure HA has. Results: The mineralized COL/nHA/GO composites exhibited loose porous structures, and the connectivity of the holes was good and thus beneficial to the exchange of nutrients and excreted metabolites. Conculsions: Antibacterial and MTT experiment confirmed that the COL/nHA/GO composite material had excellent antibacterial property and biocompatibility. Hence, these results strongly suggested the mineralized COL/nHA/GO composite is a good candidate biomaterial to be applied in bone tissue engineering.

Źródło:

Acta of Bioengineering and Biomechanics; 2018, 20, 4; 65-74
1509-409X
2450-6303

Pojawia się w:

Acta of Bioengineering and Biomechanics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 20.

Tytuł:

UV-Vis spectroscopic detection coupled with chemometrics for the measurement of mixed organic acids in water samples enriched by radial electric focusing solid phase extraction

Autorzy:

Guo, Y.
Liu, X.
Liu, J.
Bian, X.
Zhang, Q.
Pan, J.
Wan, D.

Powiązania:

https://bibliotekanauki.pl/articles/221808.pdf

Data publikacji:

2018

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

chemometrics
UV-Vis spectrophotometer
radial electric focusing solid phase extraction
mixed organic acids

Opis:

Due to the difficulty of detecting traces of organic acid mixture in an aqueous sample and the complexity of resolving UV-Vis spectra effectively, a combinatory method based on a self-made radical electric focusing solid phase extraction (REFSPE) device, UV-Vis detection and partial least squares (PLS) calculation is proposed here. In this study, REFSPE was used to enhance the extraction process of analytes between the aqueous phase and the membrane phase to enrich the trace of mixed organic acid efficiently. Then, the analytes, which were eluted from the adsorption film by ethanol with the assistance of an ultrasonic cleaning machine, were detected with UV-Vis spectrophotometry. After that, the PLS method was introduced to solve the problem of overlapping peaks in UV-Vis spectra of mixed substances and to quantify each compound. The linearly dependent coefficients between the predicted value of the model and the actual concentration of the sample were all higher than 0.99. The limit values of detection for benzoic acid, phthalic acid and p-toluene sulfonic acid were found at 9.9 μg/L, 12.2 μg/L and 13.8 μg/L with the relative recovery values between 84.8% and 117.9%. The RSD (n = 20) values of each component are 1.17%, 1.11% and 0.86%, respectively. Therefore, the proposed combined method can determine traces of complex materials in an aqueous sample efficiently and has wonderful potential applications.

Źródło:

Metrology and Measurement Systems; 2018, 25, 2; 317-329
0860-8229

Pojawia się w:

Metrology and Measurement Systems

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 21.

Tytuł:

Genome-wide association study of terpenoids in resin reveals candidate genes for resin yield in Pinus massoniana

Autorzy:

Bai, Q.
Zhang, Q.
Cai, Y.
Lian, H.
Liu, W.
Luo, M.
Zeng, L.
He, B.

Powiązania:

https://bibliotekanauki.pl/articles/2078149.pdf

Data publikacji:

2020

Wydawca:

Polska Akademia Nauk. Instytut Dendrologii PAN

Tematy:

Pinus massoniana
GC-MS
terpenoid
GWAS
candidate gene

Opis:

Masson pine (Pinus massoniana) is an important species for resin tapping in China. Molecular assisted selection (MAS) has been gradually introduced in to the selection and breeding of masson pine. Until now, the lack of connection between genome information and phenotypic data has hindered the breeding and selection of important chemical compounds of xylem resin. In this study, gas chromatography mass spectrometer (GC-MS) was employed for qualitative and quantitative analysis of chemical compounds of resin collected from 69 masson pine germplasm resources. Then, genome-wide association study (GWAS) was conducted for the terpenoids with higher heritability. A total of 15 primary compounds, including six diterpenes and nine monoterpenes/sesquiterpenes, were detected from xylem resin. By using five GWAS methods, 42 associated SNPs were identified from these masson pines. The P. taeda genome database was used for detecting candidate genes related to the associated SNPs. By using transcriptome data, several members of PKc_like super family, Cytochrome P450, AP2-ERF, F-box, and ABC transporter were found to be highly expressed in the masson pines with higher resin-yielding capacity. The terpenoids associated SNPs can be directly used for MAS. These candidate genes, especially the two F-box members, will contribute to the study of terpenoid biosynthesis mechanisms in the future.

Źródło:

Dendrobiology; 2020, 84; 109-121
1641-1307

Pojawia się w:

Dendrobiology

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 22.

Tytuł:

Influence of cutting angle on mechanical properties of rock cutting by conical pick based on finite element analysis

Autorzy:

Qiao, S.
Zhang, Z. Q.
Zhu, Z. M.
Zhang, K.

Powiązania:

https://bibliotekanauki.pl/articles/2016448.pdf

Data publikacji:

2021

Wydawca:

Politechnika Wrocławska. Wydział Geoinżynierii, Górnictwa i Geologii. Instytut Górnictwa

Tematy:

conical pick
energy consumption ratio
cutting angle
computer simulation

Opis:

In view of the current situation that it is difficult to obtain the actual cutting force received by the conical pick of Continuous-Miner and to deal with the characteristics of the cutting force. By using contact dynamics, rock mechanics, and finite element methods, based on the display dynamics analysis program ANSYS/LS-DYNA and the Holmquist–Johnson–Cook model, the contact mechanical characteristics between conical pick and rock are analyzed. The resultant force was obtained by obtaining the force curve of the conical pick under X, Y and Z directions, analysis of cutting gear cutting speed of 2.5 m/s, cutting depth of 5, 10, 15, 20 and 25 mm, cutting angle of 30°, 35°, 40°, 45°, 50° parameters of the size of cutting force and cutting ratio energy consumption, thus, the best cutting angle of the conical pick is obtained. The conclusions are as follows: when the cutting depth and cutting speed are constant, and the cutting angle is 45°, the mean cutting force received by the conical pick is the least, the specific energy consumption is the least, and the cutting efficiency is the highest. The best cutting angle of the conical pick should be 45°; When the cutting angle and cutting speed are constant, the energy needed by the cutter to cut the rock increases with the increase of cutting depth. The research results provide a theoretical basis for improving cutting efficiency and cutting life, and for choosing cutting angle and cutting thickness.

Źródło:

Mining Science; 2021, 28; 161-173
2300-9586
2353-5423

Pojawia się w:

Mining Science

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 23.

Tytuł:

A new basal actinopterygian fish from the Anisian (Middle Triassic) of Luoping, Yunnan Province, Southwest China

Autorzy:

Wen, W.
Zhang, Q.-Y.
Hu, S.-X.
Zhou, C.-Y.
Xie, T.
Huang, J.-Y.
Chen, Z.Q.
Benton, M.J.

Powiązania:

https://bibliotekanauki.pl/articles/21811.pdf

Data publikacji:

2012

Wydawca:

Polska Akademia Nauk. Instytut Paleobiologii PAN

Tematy:

actinopterygian fish
fish
Anisian
Middle Triassic
Luoping
Yunnan Province
China
Actinopterygii
Halecomorphi
Triassic

Opis:

The new neopterygian fish taxon Luoxiongichthys hyperdorsalis gen. et sp. nov. is established on the basis of five specimens from the second member of the Guanling Formation (Anisian, Middle Triassic) from Daaozi Quarry, Luoping, Yunnan Province, Southwest China. The new taxon is characterized by the following characters: triangular body outline with a distinct apex located between skull and dorsal fin; free maxilla; slender preopercular almost vertical; three suborbitals; at least eight strong branchiostegals with tubercles and comb−like ornamentation on the anterior margin; clavicles present; two postcleithra; ganoid scales covered by tubercles and pectinate ornamentation on the posterior margin with peg−and−socket structure; hemiheterocercal tail slightly forked. Comparison with basal actinopterygians reveals that the new taxon has parasemionotid−like triangular symplectics, but a semionotid opercular system. Cladistic analysis suggests that this new genus is a holostean, and either a basal halecomorph or basal semionotiform.

Źródło:

Acta Palaeontologica Polonica; 2012, 57, 1
0567-7920

Pojawia się w:

Acta Palaeontologica Polonica

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 24.

Tytuł:

Coelacanths from the Middle Triassic Luoping Biota, Yunnan, South China, with the earliest evidence of ovoviviparity

Autorzy:

Wen, W.
Zhang, Q.-Y.
Hu, S.-X.
Benton, M.J.
Zhou, C.-Y.
Tao, X.
Huang, J.-Y.
Chen, Z.-Q.

Powiązania:

https://bibliotekanauki.pl/articles/23008.pdf

Data publikacji:

2013

Wydawca:

Polska Akademia Nauk. Instytut Paleobiologii PAN

Tematy:

coelacanth
Middle Triassic
Triassic
Yunnan province
South China
China
evidence
ovoviviparity
Anisian
Actinistia
Coelacanthoidei
Latimerioidei

Opis:

The fossil record of coelacanths is patchy, with very few taxa known from the Triassic of Asia. We report here two new genera and species of coelacanths from the Luoping Biota, a recently found site of exceptional fossil preservation from Yunnan, South China. The first new taxon, Luopingcoelacanthus eurylacrimalis, is based on four specimens, which to− gether show most aspects of the anatomy. One specimen shows two small coelacanths inside the ventral portion of the ab− dominal cavity, and these are interpreted as intrauterine embryos, close to birth size, based on comparisons with previ− ously reported embryos of the fossil coelacanths Rhabdoderma and Undina, and the extant genus Latimeria. Our new find extends the evidence for ovoviviparity in coelacanths back from the Late Jurassic to the Middle Triassic. The second new taxon, Yunnancoelacanthus acrotuberculatus, is based on one specimen, and differs from Luopingcoelacanthus in the dentary, lachrymojugal, number of rays of the first dorsal fin, and especially in the ornament on dermal bones and scales. Acladistic analysis shows that the new taxa are closest relatives to the derived clade Latimerioidei. The relatively high di− versity of coelacanths in the Early Triassic, and adaptations of living Latimeria to low−oxygen conditions, suggests that the group may have included ‘disaster taxa’ that benefited from anoxic and dysoxic ocean conditions in the aftermath of the end−Permian mass extinction.

Źródło:

Acta Palaeontologica Polonica; 2013, 58, 1
0567-7920

Pojawia się w:

Acta Palaeontologica Polonica

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 25.

Tytuł:

Analysis of strain localization in porous media with transversely isotropic elasticity under undrained conditions

Autorzy:

Zhang, Y. Q.
Wang, L. Z.
Pang, M.
Fan, L. F.

Powiązania:

https://bibliotekanauki.pl/articles/949143.pdf

Data publikacji:

2017

Wydawca:

Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej

Tematy:

porous medium
strain localization
transverse isotropic elasticity
undrained condition
pore fluid compressibility

Opis:

The properties of strain localization for elastic-plastic porous media with transversely isotropic elasticity under undrained conditions are investigated. Under non-associated plasticity and tri-axial stress states, the conditions for strain localization of elastic-plastic porous media are derived, in which the effects of deviation from isotropic elasticity and pore fluid compressibility are included. Based on the Mohr-Coulomb yield criterion, the influences of the deviation from isotropic elasticity and pore fluid compressibility on the direction angle of localized band initiation and the corresponding critical hardening modulus for the case of plane strain are discussed. As a result, the properties of strain localization are dependent upon the deviation from isotropic elasticity and pore fluid compressibility. The deviation from isotropic elasticity and pore fluid compressibility has significant impacts on the direction angle of localized band initiation and the corresponding critical hardening modulus.

Źródło:

Journal of Theoretical and Applied Mechanics; 2017, 55, 1; 199-211
1429-2955

Pojawia się w:

Journal of Theoretical and Applied Mechanics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 26.

Tytuł:

Selection of reference genes for quantitative real-time RT-PCR on gene expression in Golden Pompano (Trachinotus ovatus)

Autorzy:

Chen, X.J.
Sun, Y.
Zhang, X.Q.
Huang, S.
Cao, Z.J.
Qin, Q.W.
Hu, W.T.
Zhou, Y.C.

Powiązania:

https://bibliotekanauki.pl/articles/2087908.pdf

Data publikacji:

2017

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Źródło:

Polish Journal of Veterinary Sciences; 2017, 3; 583-594
1505-1773

Pojawia się w:

Polish Journal of Veterinary Sciences

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 27.

Tytuł:

A New Potential Superhard Phase of $OsN_2$

Autorzy:

Fan, Q.
Wei, Q.
Yan, H.
Zhang, M.
Zhang, D.
Zhang, J.

Powiązania:

https://bibliotekanauki.pl/articles/1205218.pdf

Data publikacji:

2014-08

Wydawca:

Polska Akademia Nauk. Instytut Fizyki PAN

Tematy:

62.20.de
65.40.-b
62.20.dq

Opis:

A new phase of C2/m $OsN_2$ is proposed in this paper. The crystal structure, elasticity and electronic properties of C2/m $OsN_2$ were studied by first-principles calculations. The elastic constants, the elastic moduli (B, G, and E) and Poisson's ratio v of $OsN_2$ have been investigated. From the first-principles calculations, we find that C2/m $OsN_2$ is metallic and mechanically stable. The quasi-harmonic Debye model, using a set of total energy versus molar volume obtained from the first-principles calculations, is applied to the study of the thermal and vibrational effects. The dependence of structural parameters, thermal expansions, heat capacities, Grüneisen parameters and Debye temperatures on the temperature and pressure are obtained in the whole pressure range from 0 to 80 GPa and temperature range from 0 to 800 K as well as compared with available data.

Źródło:

Acta Physica Polonica A; 2014, 126, 3; 740-746
0587-4246
1898-794X

Pojawia się w:

Acta Physica Polonica A

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 28.

Tytuł:

Lignite cleaning in NaCl solutions by the reverse flotation technique

Autorzy:

Zhang, H.
Liu, Q.

Powiązania:

https://bibliotekanauki.pl/articles/110516.pdf

Data publikacji:

2015

Wydawca:

Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej

Tematy:

lignite
reverse flotation
NaCl
kinetics
coal preparation

Opis:

A cleaning possibility of low (BD) and high ash content (IM) lignites in NaCl solutions using a reverse flotation technique was studied. Preliminary test results indicated that BD lignite cannot be cleaned effectively in the traditional manner because gangue was floated first rather than a combustible material. Further studies indicated that the lignite cleaning in NaCl solutions using the reverse flotation technique is possible. However, a large quantity of dodecyl amine hydrochloride (DAH) was required. A lower ash content in a concentrate can be obtained by addition of NaCl. A concentrate yield can be im-proved by addition of starch. Under the test conditions, for BD lignite with the ash content in the feed 15.19%, the ash content in the concentrate 11.44% and the concentrate yield 67.38% were obtained. Similarly, for IM lignite with the ash content in the feed 57.40%, the ash content in the concentrate 32.90% and the concentrate yield 25.08% were obtained. The flotation rate constant k and maximum ash recovery ε∞ significantly increased with the NaCl concentration.

Źródło:

Physicochemical Problems of Mineral Processing; 2015, 51, 2; 695-706
1643-1049
2084-4735

Pojawia się w:

Physicochemical Problems of Mineral Processing

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 29.

Tytuł:

Experimental and optimization design of offshore drilling seal

Autorzy:

Zhang, Y.
Zhang, X.
Chang, X.
Wu, Q.

Powiązania:

https://bibliotekanauki.pl/articles/260627.pdf

Data publikacji:

2017

Wydawca:

Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa

Tematy:

offshore drilling
design optimization
seals
finite element analysis
MATLAB

Opis:

Three-cone bit is the key equipment in the exploration of the oil in offshore drilling and exploration, the bearing system and the seal system are the critical components for the bit. Especially in the offshore drilling environment, the seal design need to be carefully considered. A multi-objective optimization design including orthogonal design method and F-test with finite element analysis for a three-cone bit seal is proposed. Firstly, the calculation method of optimization targets are given, including the minimization of maximum contact pressure and leakage rate analyzed by ANSYS and MATLAB respectively, to maximize seal life and reliability. Then, an orthogonal experiment approach is used to investigate the effects of the eleven parameters on the seal performance, and the influence degrees of the seal factors on the optimization targets have been confirmed by F-test, and the reasonable factors can be determined by the trend of the targets. Finally, in order to validate the analysis results, a new seal was designed and tested on a seal tester compared to the previous seal. In this test, the seal maximum interface temperature that reflects the position of maximum contact pressure can be obtained by using three high precision thermocouples. Both the experiment results and the numerical analyses proved that the maximum contact pressure and leakage rate of the improved seal have been reduced compared to the previous.

Źródło:

Polish Maritime Research; 2017, S 3; 72-78
1233-2585

Pojawia się w:

Polish Maritime Research

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 30.

Tytuł:

Adsorption of congo red from aqueous solutions by porous soybean curd xerogels

Autorzy:

Zhang, Z.
Li, Y.
Du, Q.
Li, Q.

Powiązania:

https://bibliotekanauki.pl/articles/778311.pdf

Data publikacji:

2018

Wydawca:

Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie

Tematy:

Soybean curd
Congo red
Adsorption
Kinetics
Thermodynamics

Opis:

Soybean curd is a very popular food containing high-quality protein, polyunsaturated fats, vitamins, minerals and other nutrients. This study aims to prepare porous soybean curd xerogels via a vacuum freeze drying method and uses them as adsorbents to remove congo red from aqueous solutions. The morphology and functional groups of the soybean curd xerogels were characterized using scanning electron microscopy and Fourier transform infrared spectroscopy, respectively. The adsorption properties of congo red onto the soybean curd xerogels were carried out through investigating the influencing experimental parameters such as the drying method, solution pH, adsorbent dose, contact time and temperature. The results showed that the adsorption isotherm data were fitted well to the Freundlich isotherm. Adsorption kinetics of congo red onto the soybean curd followed the pseudo-second-order kinetic model. The thermodynamic parameters, such as ΔG°, ΔH° and ΔS°, were also determined.

Źródło:

Polish Journal of Chemical Technology; 2018, 20, 3; 95-102
1509-8117
1899-4741

Pojawia się w:

Polish Journal of Chemical Technology

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 31.

Tytuł:

Effects of pretreated ozone and modified atmosphere packaging on the quality of fresh-cut green asparagus

Autorzy:

An, J.
Zhang, M.
Lu, Q.

Powiązania:

https://bibliotekanauki.pl/articles/25240.pdf

Data publikacji:

2006

Wydawca:

Polska Akademia Nauk. Instytut Agrofizyki PAN

Tematy:

fresh-cut green asparagus
Asparagus officinalis
ozone
modified atmosphere packaging
pretreatment
lignifying
packaging
quality
cell wall composition
asparagus

Źródło:

International Agrophysics; 2006, 20, 2
0236-8722

Pojawia się w:

International Agrophysics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 32.

Tytuł:

Ship collision avoidance decision model and simulation based on collision circle

Autorzy:

Zhang, J.
Hu, Q.
Liao, B.

Powiązania:

https://bibliotekanauki.pl/articles/116588.pdf

Data publikacji:

2019

Wydawca:

Uniwersytet Morski w Gdyni. Wydział Nawigacyjny

Tematy:

collision avoidance
anti-collision
collision circle
decision model
ship collision avoidance decision model
Possible Point of Collision (PPC)
Java Topology Suite (JTS)
colregs

Opis:

In order to give consideration to both comprehensive evaluation and efficient decision-making in collision avoidance decision-making process, a collision avoidance decision-making model based on collision circle is proposed by introducing the concept of collision circle. Firstly, the factors causing ship collision are analyzed. Secondly, the static and dynamic characteristics of collision circles are analyzed and summarized by using collision circle simulation cases. Thirdly, based on the static characteristics, a reasonably distributed collision avoidance decision model of (Possible Point of Collision,PPC) was established. Finally, the spatial data operations core algorithm (Java Topology Suite, JTS) is used for logical operation and visualization, so as to realize the ship collision avoidance evaluation and decision. The decision model was used to verify the accident scenario of "SANCHI", and the results showed that the obtained collision avoidance scheme was reasonable and in line with the "International Regulations for Preventing Collisions at Sea" and safety requirements, thus providing a reference for maritime operators to avoid collisions between ships.

Źródło:

TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2019, 13, 2; 325-334
2083-6473
2083-6481

Pojawia się w:

TransNav : International Journal on Marine Navigation and Safety of Sea Transportation

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 33.

Tytuł:

Fatigue Behavior and Mechanism of FV520B-I Owing to the Effect of Loading Frequency on the Fatigue Property in HCF and VHCF Regime

Autorzy:

Wang, J.
Zhang, Y.
Shi, B.
Zhao, Q.
Sun, Q.
Zhang, Z.
Lu, H.

Powiązania:

https://bibliotekanauki.pl/articles/353784.pdf

Data publikacji:

2018

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

ultrahigh loading frequency
FV520B-I
fatigue strength
fatigue conversion model

Opis:

Fatigue property of FV520B-I is affected by the ultrahigh loading frequency significantly, and the ultrasonic fatigue experimental data can’t be employed directly to analyze the fatigue failure in the actual remanufacturing engineering. However few theories about the effect of loading frequency on the fatigue property of FV520B-I has ever been proposed. In this paper, both ultrasonic experiment and conventional experiment are conducted out to obtain the fatigue data. The effect of loading frequency on the fatigue data distribution is discussed firstly, its fatigue limit declines with the increase of the loading frequency. Then the fracture surface observations are captured, the fatigue property and fatigue behavior mechanism of FV520B-I is examined by analyzing the fracture surface features, crack initiation and failure observations. A new material frequency correction factor is proposed and introduced to eliminate the influence of the loading frequency on the FV520B-I fatigue property. FV520B-I empirical fatigue life conversion model and fatigue strength conversion model are established with comprehensive use of a fitting algorithm based on the combination of experimental data and classic formula. A clear understand of the effect of loading frequency on the fatigue property of FV520B-I is novel and has an important significance in guaranteeing the accuracy of the actual fatigue analysis of FV520B-I in the remanufacturing engineering.

Źródło:

Archives of Metallurgy and Materials; 2018, 63, 1; 347-357
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 34.

Tytuł:

Reliability analysis for multi-state system based on triangular fuzzy variety subset bayesian networks
Analiza niezawodności systemu wielostanowego z zastosowaniem sieci bayesowskich opartych na rozmytych podzbiorach zmienności opisanych przez trójkątną funkcję przynależności

Autorzy:

He, Q.
Zha, Y.
Zhang, R.
Sun, Q.
Liu, T.

Powiązania:

https://bibliotekanauki.pl/articles/302183.pdf

Data publikacji:

2017

Wydawca:

Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN

Tematy:

teoria zbiorów rozmytych
system wielostanowy
sieć bayesowska
wypadek podczas ruchu wózka windy
analiza niezawodności
reliability analysis
fuzzy set theory
Multi-State System
Bayesian network
elevator free movement accident

Opis:

W niniejszej pracy zaproponowano nową metodę analizy niezawodności systemów wielostanowych wykorzystującą sieci Bayesa (BN) oparte na rozmytych podzbiorach zmienności opisanych za pomocą trójkątnej funkcji przynależności. Metoda ta uwzględnia rozmyty charakter danych dotyczących uszkodzeń, wielostanowość systemu oraz zmienność prawdopodobieństwa wystąpienia uszkodzenia w czasie. BN, które znalazły zastosowanie w modelowaniu i metodach obliczeniowych, wykorzystuje się także do analizy niezawodności. W przedstawionych badaniach, analizę BN uzupełniono o elementy teorii zbiorów rozmytych wykorzystując do opisu prawdopodobieństwa wystąpienia uszkodzenia, podzbiory zmienności opisane przez trójkątną funkcję przynależności. Niepewność zależności logicznej pomiędzy awariami reprezentowanymi przez różne węzły sieci opisano za pomocą tabel rozmytego prawdopodobieństwa warunkowego. W pierwszej kolejności analizowano prawdopodobieństwo uszkodzenia każdego korzenia (węzła głównego) w funkcji czasu. Następnie, wyznaczono trójkątny rozmyty podzbiór zmienności, za pomocą którego opisano rozmyte prawdopodobieństwo uszkodzenia węzłów głównych. Podzbiór ten wykorzystano do analizy niezawodności systemu wielostanowego przy pomocy rozmytych BN. Artykuł kończy opis wypadku podczas ruchu wózka windy szybkobieżnej, który potwierdza skuteczność i możliwość praktycznego wykorzystania proponowanej metody. Wyniki pokazują, że proponowane podejście może skutecznie rozwiązywać na wczesnym etapie problemy związane z niepewnością informacji oraz wielostanowością systemu.
In this paper, a novel reliability analysis method for multi-state system is proposed on the basis of triangular fuzzy variety subset Bayesian network (BN). The method considers fuzziness, multi-state, and variety of failure probability over time. With advantages in modeling and computation, the BN is utilized for reliability analysis. Fuzzy set theory is introduced into the BN analysis by using triangular fuzzy variety subset to describe failure probability. The uncertainty of fault logical relationship between different nodes is described through fuzzy conditional probability tables. As a function of time, the failure probability of each root node is analyzed first. Subsequently, the triangle fuzzy variety subset is established to describe the fuzzy failure probability of root nodes. This subset is applied to analyze the reliability of multi-state system fuzzy BN. Finally, a case study on the car free movement accident of flexible high-speed elevator lift system is used to demonstrate the effectiveness and practicality of the proposed method. Results show that the proposed approach could effectively address the problems on information uncertainty and multi-state in the early stage.

Źródło:

Eksploatacja i Niezawodność; 2017, 19, 2; 158-165
1507-2711

Pojawia się w:

Eksploatacja i Niezawodność

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 35.

Tytuł:

Prediction of moisture content uniformity using hyperspectral imaging technology during the drying of maize kernel

Autorzy:

Huang, M.
Zhao, W.
Wang, Q.
Zhang, M.
Zhu, Q.

Powiązania:

https://bibliotekanauki.pl/articles/24685.pdf

Data publikacji:

2015

Wydawca:

Polska Akademia Nauk. Instytut Agrofizyki PAN

Tematy:

prediction
moisture content
uniformity
hyperspectral imaging
drying
maize kernel

Opis:

Moisture content uniformity is one of critical parameters to evaluate the quality of dried products and the drying technique. The potential of the hyperspectral imaging technique for evaluating the moisture content uniformity of maize kernels during the drying process was investigated. Predicting models were established using the partial least squares regression method. Two methods, using the prediction value of moisture content to calculate the uniformity (indirect) and predicting the moisture content uniformity directly, were investigated. Better prediction results were achieved using the direct method (with correlation coefficients RP = 0.848 and root-mean-square error of prediction RMSEP = 2.73) than the indirect method (RP = 0.521 and RMSEP = 10.96). The hyperspectral imaging technique showed significant potential in evaluating moisture content uniformity of maize kernels during the drying process.

Źródło:

International Agrophysics; 2015, 29, 1
0236-8722

Pojawia się w:

International Agrophysics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 36.

Tytuł:

Effect of ammonium sulfate on the sulfidation flotation of malachite
Wpływ obecności siarczanu amonu na przebieg procesu sulfitacji (siarczkowania) w trakcie flotacji malachitu

Autorzy:

Liu, C.
Feng, Q.
Zhang, G.

Powiązania:

https://bibliotekanauki.pl/articles/220224.pdf

Data publikacji:

2018

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

malachit
siarczek amonu
flotacja poprzez sulfidację (siarczkowanie)
budowa powierzchniowa
malachite
ammonium sulfate
sulfidization-flotation
surface morphology

Opis:

The effect of ammonium sulfate on the sulfidation flotation of malachite was investigated by micro-flotation tests, scanning electron microscope (SEM) and energy dispersive spectrometer (EDS) measurements. Micro-flotation results show that the sodium sulfide concentration and strring time are difficult to control on the sulfidation flotation of malachite. However, when ammonium sulfate was used, the detrimental effect of mixing time and high dosage of sodium sulfide on the sulfidization flotation of malachite can be efficiently eliminated. SEM results showed that sulfidized film on malachite in the presence of ammonium sulfate, and EDS analysis results showed that more S element absorbed and distributed equality on the malachite surface, which was agreed well with the macro-flotation results.
Badano wpływ siarczanu amonu na przebieg procesu siarczkowania w trakcie flotacji malachitu przy wykorzystaniu badania mikroskopowego, mikroskopii elektronowej skanningowej (SEM) oraz pomiarów spektrometrycznych rozpraszania energii EDS. Testy mikroskopowe wykazały, że stężenie siarczku sodu i długość czasu mieszania są parametrami, które niezwykle trudno kontrolować w trakcie procesu siarczkowania towarzyszącemu flotacji malachitu. Z kolei przy zastosowaniu siarczanu amonu, udaje się skutecznie wyeliminować niekorzystne efekty związane z czasem mieszania oraz wysokimi stężeniami siarczku sodu w trakcie flotacji malachitu poprzez siarczkowanie. Wyniki mikroskopii skaningowej wskazują, że przy zastosowaniu siarczanu amonu powstaje cienki film siarczkowy na malachicie zaś pomiary spektrometryczne wykazały większe ilości zaabsorbowanej i bardziej równomiernie rozłożonej siarki pierwiastkowej S na powierzchni malachitu, co pozostaje w pełnej zgodności z wynikami uzyskanymi z badania procesu flotacji w skali makro.

Źródło:

Archives of Mining Sciences; 2018, 63, 1; 139-148
0860-7001

Pojawia się w:

Archives of Mining Sciences

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 37.

Tytuł:

General concerns life-cycle design of economical ice-resistant structures in the Bohai Sea

Autorzy:

Zhang, D.
Yu, S.
Yue, Q.

Powiązania:

https://bibliotekanauki.pl/articles/258458.pdf

Data publikacji:

2017

Wydawca:

Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa

Tematy:

ice zone
economical ice-resistant structure
life-cycle design
performance-based design
cost-effective code

Opis:

In China, the oil and natural gas resources of Bohai Bay are mainly marginal oil fields. It is necessary to build both iceresistant and economical offshore platforms. However, there are many risks during the life cycle of offshore platforms due to the imperfect preliminary design for the Bohai Sea economical ice-resistant structures. As a result, the whole life-cycle design should be considered, including plan, design, construction, management and maintenance design. Based on the demand of existing codes and research of the basic design, structural ice-resistant performance and the reasonable management and maintenance, the life-cycle design theory is discussed. It was concluded that the life-cycle cost-effective optimum design proposed will lead to a minimum risk.

Źródło:

Polish Maritime Research; 2017, S 2; 164-191
1233-2585

Pojawia się w:

Polish Maritime Research

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 38.

Tytuł:

Research and application of rule updating mining algorithm for marine water quality monitoring data

Autorzy:

Sun, Q
Zhang, J.
Xu, X

Powiązania:

https://bibliotekanauki.pl/articles/258822.pdf

Data publikacji:

2018

Wydawca:

Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa

Tematy:

marine water quality monitoring
database updating
data mining
rule updating

Opis:

This paper studies the characteristics of marine water quality monitoring data monitored by photoelectric sensor network, mines the potential information from the massive data. on account of the continuous accumulation of monitoring data, this paper focuses on the study of database with numerical attribute and proposes a rule updating algorithm for solving the rule maintenance issues caused by changes in the database. according to the rule, the algorithm forms a new database from part of the original data and the new data, and searches the new database by random search, thus can avoid creating a large number of redundant rules and can quickly mine effective rules at the same time. experimental results show that this method not only can avoid mining in the whole original massive data, but also can improve work efficiency, and can quickly and effectively find new data and find useful rules in the data with high practicability.

Źródło:

Polish Maritime Research; 2018, S 3; 136-140
1233-2585

Pojawia się w:

Polish Maritime Research

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 39.

Tytuł:

Investigation and statistical analysis on the deterrence effect of police patrol

Autorzy:

Suo, Q.
Suo, R.
Zhang, D.

Powiązania:

https://bibliotekanauki.pl/articles/2140956.pdf

Data publikacji:

2018

Wydawca:

Fundacja Centrum Badań Socjologicznych

Tematy:

road crash
safety measure
drivers' behaviour and attitude
deterrence effects

Opis:

This study investigated the deterrence effect of the police patrol on the road safety in China and the research purpose was achieved by questionnaire survey and data regression. Firstly, a questionnaire survey was carried out to investigate the drivers’ illegal behaviours and attitudes to safety measures, such as police patrol, surveillance cameras and warning signs, and 137 drivers participated in the survey; the statistical results showed that 45.3%, 4.4% and 16.8% of the respondents had the experience of speeding, driving under influencing of alcohol and fatigued driving respectively; all of the participants believed that traffic police patrol would change their dangerous driving behaviours and police patrol is most effective among three road safety measures based on the investigations. Secondly, data about police patrol frequency and road crash rate on the road segment was collected from the local Transportation Administration Bureau and the regression analysis based on the data was conducted to investigate the direct effect of traffic police patrol on road safety improvement. The results indicated that increasing the frequency of police patrol has an obvious positive effect on improving the road safety and it is consistent with the results from self-reported questionnaire survey.

Źródło:

Journal of Sustainable Development of Transport and Logistics; 2018, 3, 3; 69-76
2520-2979

Pojawia się w:

Journal of Sustainable Development of Transport and Logistics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 40.

Tytuł:

Application of nitrogen injection displacement for fire extinguishment
Zwalczanie pożarów endogenicznych za pomocą azotu

Autorzy:

Tang, Q.
Qin, R. X.
Chen, Q. H.
Zhang, G. S.

Powiązania:

https://bibliotekanauki.pl/articles/348639.pdf

Data publikacji:

2012

Wydawca:

Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH

Tematy:

technologia ochrony przeciwpożarowej w szczelnych zrobach
technologia ochrony przeciw pożarowej metodą wtrysku gazów szlachetnych
technologia zwalczania pożarów za pomocą azotu
technologia separacji
nowe rozwiązania w technologii ochrony pożarowej
fire-prevented technology in sealed gob
fire-prevented technology by infusing inert gases
infusing-permuting nitrogen technology
separation technology
new development in fire-prevented technology

Opis:

The article introduced the basic theory of nitrogen injection displacement for fire extinguish, which is presented by Professor Guoshu Zhang, applied this technology in coal mine, and then verified the results through numerical simulation, the production got from the technology's application. Presented some new views in specific implementation of nitrogen injection displacement for fire extinguish.
W niniejszym artykule opisano zastosowanie podstawowej teorii wypełniania zrobów azotem podczas gaszenia pożarów endogenicznych zaprezentowanej przez profesora Guoshu Zhang, jej zastosowanie w kopalni oraz weryfikację wyników za pomocą symulacji numerycznej i uzyskane efekty w związku z zastosowaniem tej technologii. Zaprezentowano szczegółowe zasady oraz poglądy na temat wypełniania zrobów azotem do zwalczania pożarów.

Źródło:

AGH Journal of Mining and Geoengineering; 2012, 36, 3; 345-351
1732-6702

Pojawia się w:

AGH Journal of Mining and Geoengineering

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 41.

Tytuł:

The Interaction of Water with Glycine: A Combined Inelastic Neutron Scattering and Raman Spectra Studies

Autorzy:

Zhang, P.
Zhang, Y.
Han, S.
Yan, Q.
Li, J.

Powiązania:

https://bibliotekanauki.pl/articles/2044762.pdf

Data publikacji:

2006-03

Wydawca:

Polska Akademia Nauk. Instytut Fizyki PAN

Tematy:

36.20.Ng
87.64.Je
25.40.Fq
82.30.Rs

Opis:

The vibrational dynamics of water around glycine was investigated by using Raman spectroscopy and inelastic neutron scattering. Experiments of deuterated glycine versus deuterium were performed as comparison. The study shows that for glycine, the exchange of proton-deuteron on the active NH$\text{}_{3}^{+}$ side was easy, whereas there was hardly exchange on the CH$\text{}_{2}$ side. Comparing different proportion of glycine vs. water molecules we obtained that the presence of water hardly changes the main features of glycine illustrating its hydrophobic character. The intralayer hydrogen bonds of glycine crystal are difficult to be replaced due to its stronger bond than water.

Źródło:

Acta Physica Polonica A; 2006, 109, 3; 399-404
0587-4246
1898-794X

Pojawia się w:

Acta Physica Polonica A

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 42.

Tytuł:

Effect of water activity and glass transition on critical preservation conditions of dried squids

Autorzy:

Ren, A.-Q.
Zhang, M.
Mujumdar, A.

Powiązania:

https://bibliotekanauki.pl/articles/25846.pdf

Data publikacji:

2011

Wydawca:

Polska Akademia Nauk. Instytut Agrofizyki PAN

Tematy:

critical preservation condition
dried squid
glass transition
glass transition temperature
physical parameter
preservation
sorption isotherm
squid
water activity

Źródło:

International Agrophysics; 2011, 25, 3
0236-8722

Pojawia się w:

International Agrophysics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 43.

Tytuł:

A numerical approach in applying panel method for the added mass of a group of sections in fluids

Autorzy:

Zhang, D.
Li, P.
Wang, Q.
Yang, Y.

Powiązania:

https://bibliotekanauki.pl/articles/38695713.pdf

Data publikacji:

2023

Wydawca:

Instytut Podstawowych Problemów Techniki PAN

Tematy:

numerical method
panel method
fluid-structure interaction
confined fluid
fluid mass coefficients

Opis:

This paper firstly expands an efficient numerical methodology developed from the source panel method to the added mass calculation of long column systems in fluid. Structures submerged in fluid are considered as two-dimensional and are discretized into a number of source panels. The influence coefficient matrices and the potential function are then calculated and the fluid forces are calculated by the unsteady Bernoulli equation. Finally, we utilize this present method to calculate the mass coefficients of some typical problems, which effectively verifies its feasibility and accuracy. This method takes into account both applicability and computational efficiency. On the one hand, in contrast to the analytical method which is only applicable to specific cross-sections, this method is applicable to arbitrary boundaries with C⁰ continuity in mathematics. On the other hand, this method requires less mesh and computation than commercial software. This paper extends the application of the source panel method which is widely used in aerodynamics to provide a reference for added mass calculation problems in engineering.

Źródło:

Archives of Mechanics; 2023, 75, 1-2; 151-168
0373-2029

Pojawia się w:

Archives of Mechanics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 44.

Tytuł:

Sea ice management for oil and gas platforms in the Bohai Sea

Autorzy:

Zhang, D.
Yu, S.
Wang, Y.
Yue, Q.

Powiązania:

https://bibliotekanauki.pl/articles/258746.pdf

Data publikacji:

2017

Wydawca:

Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa

Tematy:

Bohai
sea ice management
ocean platform
ice-induced vibration
ice risk prediction

Opis:

Bohai is a typical marginal oil field in an ice region, where most of the oil and gas platforms are economical. Sea ice is the main factor that affects the safety of oil and gas platforms in Bohai. Due to the complexity of the ice load and ice-induced vibrations, there are large security risks when developing Bohai oil and gas in the winter. It is difficult to ensure the safe production of oil and gas in winter using existing sea ice disaster warning technologies. Based on winter oil and gas production in the Bohai Sea’s Liaodong Bay, a set of suitable sea ice management systems is proposed in this paper. These systems integrate sea ice monitoring, risk assessment and risk prediction technologies. Based on the risk warning system, an ice management model of a Bohai ice platform has been put into practice, which ensures the safe production of the platform in winter.

Źródło:

Polish Maritime Research; 2017, S 2; 195-204
1233-2585

Pojawia się w:

Polish Maritime Research

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 45.

Tytuł:

Magnetohydrodynamic Calculation on Double-Loop Channel Induction Tundish

Autorzy:

Yue, Q.
Pei, X.
Zhang, C.
Wang, X.

Powiązania:

https://bibliotekanauki.pl/articles/350969.pdf

Data publikacji:

2018

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

induction heating
electromagnetic field
channel
tundish

Opis:

A mathematical model is developed to investigate the electromagnetic induction heating in a continuous casting tundish with the double-loop inductor. Maxwell’s equations are solved using finite element method to obtain the magnetic flux density, electromagnetic force, and Joule heating. Results show that the induced current through the two channels generates a current loop. The electromagnetic force points to the center of the channel, thus generating a pinch effect on the molten steel. With the skin effect and proximity effect, Joule heating rate reaches its maximum and minimum values at the corners and the center of the crosssection area respectively. Power ampere-turn has a significant influence on the electromagnetic force and Joule heating density. As ampere-turns vary from 3.6×10⁴ to 2.16×10⁵, Joule heating rate increases from 2.4 MW m^-3 to 85 MW m^-3. Electromagnetic force also increases from 8×10⁴ N m^-3 to 3×10⁶ N m^-3 in the center axis line of the channel. The present work reveals the relationship between magnetic flux density and electromagnetic force. The results will be helpful in adjusting the electromagnetic field in channel-induction furnaces and modifying the design of channel parameters.

Źródło:

Archives of Metallurgy and Materials; 2018, 63, 1; 329-336
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 46.

Tytuł:

Catalytic performances of cross-linking humic acids supported Pd/Ni bimetallic catalyst for heck reaction

Autorzy:

Xu, Q.
Zhang, L.
Shi, W.
Cui, Y.

Powiązania:

https://bibliotekanauki.pl/articles/778727.pdf

Data publikacji:

2009

Wydawca:

Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie

Tematy:

kwas humusowy
epichlorohydryna
katalizator bimetaliczny Pd/Ni
katalizator nośnikowy
reakcja Hecka
cross-linking humic acid
epichlorohydrin
Pd/Ni bimetallic catalyst
supported catalyst
Heck reaction

Opis:

The cross-linking humic acids (CL-HAs), epichlorohydrin as the cross-linking reagent and the supported Pd/Ni bimetallic catalysts (CL-HAs-Pd/Ni) were prepared and characterized by IR, AAS, XPS, TEM. The effects of reaction time, temperature, base, solvent and the amount of catalyst on the properties of the catalyst were studied. These catalysts could catalyze the Heck reaction of aryl halides and substituted aryl halides with acrylic acids or styrene successfully; the yields were all above 95%.

Źródło:

Polish Journal of Chemical Technology; 2009, 11, 3; 22-26
1509-8117
1899-4741

Pojawia się w:

Polish Journal of Chemical Technology

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 47.

Tytuł:

3-aminopropyltriethoxysilane functionalized nanoscale zero-valent iron for the removal of dyes from aqueous solution

Autorzy:

Zhang, J.
Liu, Q.
Ding, Y.
Bei, Y.

Powiązania:

https://bibliotekanauki.pl/articles/779270.pdf

Data publikacji:

2011

Wydawca:

Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie

Tematy:

3-aminopropylotrietoksysilan
żelazo zerowartościowe
separacja magnetyczna
3-aminopropyltriethoxysilane
nano zero-valent iron
acid brilliant scarlet GR
reactive brilliant red K-2BP
magnetic separation

Opis:

Batch studies were conducted to investigate the potential of 3-aminopropyltriethoxysilane modified nano zero-valent iron (APS-NZVI) to adsorb two dyes (acid brilliant scarlet GR and reactive brilliant red K-2BP) from aqueous solution. APS-NZVI showed good adsorption performance for two dyes. Under the adsorption conditions of pH 4.5, initial concentration was 100 mg/L, and time=4h, the maximum adsorption capacities of APS-NZVI were 121.06 mg/g for acid brilliant scarlet GR and 191.5 mg/g for reactive brilliant red K-2BP, respectively. The results revealed that the adsorption behavior of the dyes on the nano-particles fitted well with the Langmuir model and the sorption kinetics fits well the pseudo-second-order rate equation.

Źródło:

Polish Journal of Chemical Technology; 2011, 13, 2; 35-39
1509-8117
1899-4741

Pojawia się w:

Polish Journal of Chemical Technology

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 48.

Tytuł:

The effect of surface functional groups of nanosilica on the properties of polyamide 6/SiO2 nanocomposite

Autorzy:

Xu, Q.
Chen, F.
Li, X.
Zhang, Z.

Powiązania:

https://bibliotekanauki.pl/articles/779538.pdf

Data publikacji:

2013

Wydawca:

Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie

Tematy:

nanosilica
polyamide 6
nanocomposite
in situ polymerization

Opis:

The present study investigated the effect of the surface functional groups of nanosilica on the interfacial, crystallization, and thermal stability of polyamide 6/SiO2 (PA6/SiO2) nanocomposite, in which nanosilica was modified in situ with both 3-triethoxysilylpropylamine and 3-methacryloxypropyltrimethoxy silane¬ (KH-550 and KH-570). The FTIR analysis results showed the chemical bonding action between the reacting amino groups of nanosilica and end carboxyl groups of polyamide 6 enhanced with increasing the ratio of KH-550 and KH-570. The XRD spectrum indicated that the crystal structure of PA6/SiO2 nanocomposites tended to form α crystal type that was beneficial to an improvement of mechanical properties, and which was in agreement with the results of mechanical strength measurements. It was also found that crystallization temperature and crystallization rate of PA6/SiO2 nanocomposites were lower than that of neat polyamide 6.

Źródło:

Polish Journal of Chemical Technology; 2013, 15, 3; 20-24
1509-8117
1899-4741

Pojawia się w:

Polish Journal of Chemical Technology

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 49.

Tytuł:

Research on relationship between carbon dioxide emissions, imports, exports, and population in China

Autorzy:

Jin, Q.-Y.
Zhang, J.
Gao, Y.-Q.
Su, X.
Fu, Y.-S.

Powiązania:

https://bibliotekanauki.pl/articles/207318.pdf

Data publikacji:

2014

Wydawca:

Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej

Tematy:

population statistics
carbon dioxide
global warming
carbon dioxide emissions
total carbon
statystyki ludności
dwutlenek węgla
globalne ocieplenie
emisja dwutlenku węgla
węgiel całkowity

Opis:

Empirical relationships between carbon dioxide emission, imports, exports, and population have been investigated. An empirical model with carbon dioxide emissions, structure and scale of import and exports, populations was built Using ridge regression analysis and observed data from 1985 to 2006 in China, we examined the relationship between each part of carbon dioxide emission and corresponding coefficients, including GIV (gross imports value), GXV (gross exports value), and P (populations). The results have shown that the increasing trend in TCOE (total carbon dioxide emissions) was determined by the exports, while its standard level is determined by population. Increasing the imports may reduce TCOE. Considering working to expand economy, the best ways for China to reduce TCOE are to introduce advanced technology and take actions to guarantee strict execution of cut-emission policy. Although the increasing imports also can reduce TCOE, it is not reasonable for the global cut-emission policy. To control population is not applicable as the immense population base, so government's publicity for low-carbon live is a necessary and feasible way to reduce carbon dioxide emission.

Źródło:

Environment Protection Engineering; 2014, 40, 2; 75-85
0324-8828

Pojawia się w:

Environment Protection Engineering

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 50.

Tytuł:

An improved feature extraction method for rolling bearing fault diagnosis based on MEMD and PE

Autorzy:

Zhang, H.
Zhao, L.
Liu, Q.
Luo, J.
Wei, Q.
Zhou, Z.
Qu, Y.

Powiązania:

https://bibliotekanauki.pl/articles/259770.pdf

Data publikacji:

2018

Wydawca:

Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa

Tematy:

improved feature extraction method
rolling bearing fault diagnosis
MEMD
PE

Opis:

The health condition of rolling bearing can directly influence to the efficiency and lifecycle of rotating machinery, thus monitoring and diagnosing the faults of rolling bearing is of great importance. Unfortunately, vibration signals of rolling bearing are usually overwhelmed by external noise, so the fault frequencies of rolling bearing cannot be readily obtained. In this paper, an improved feature extraction method called IMFs_PE, which combines the multivariate empirical mode decomposition with the permutation entropy, is proposed to extract fault frequencies from the noisy bearing vibration signals. First, the raw bearing vibration signals are filtered by an optimal band-pass filter determined by SK to remove the irrelative noise which is not in the same frequency band of fault frequencies. Then the filtered signals are processed by the IMFs_PE to get rid of the relative noise which is in the same frequency band of fault frequencies. Finally, a frequency domain condition indicator FFR(Fault Frequency Ratio), which measures the magnitude of fault frequencies in frequency domain, is calculated to compare the effectiveness of the feature extraction methods. The feature extraction method proposed in this paper has advantages of removing both irrelative noise and relative noise over other feature extraction methods. The effectiveness of the proposed method is validated by simulated and experimental bearing signals. And the results are shown that the proposed method outperforms other state of the art algorithms with regards to fault feature extraction of rolling bearing.

Źródło:

Polish Maritime Research; 2018, S 2; 98-106
1233-2585

Pojawia się w:

Polish Maritime Research

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce