Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "heat method" wg kryterium: Temat


Tytuł:
Path planning for an autonomous underwater vehicle in a cluttered underwater environment based on the heat method
Autorzy:
Sun, Kaiyue
Liu, Xiangyang
Powiązania:
https://bibliotekanauki.pl/articles/1838198.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
autonomous underwater vehicle
path planning
heat method
heat diffusion
cost function
pojazd podwodny autonomiczny
planowanie trasy
dyfuzja ciepła
funkcja kosztu
Opis:
This paper proposes a novel autonomous underwater vehicle path planning algorithm in a cluttered underwater environment based on the heat method. The algorithm calculates the isotropic and anisotropic geodesic distances by adding the direction and magnitude of the currents to the heat method, which is named the anisotropy-based heat method. Taking account of the relevant influence of the environment on the cost functions, such as currents, obstacles and turn of the vehicle, an efficient collision-free and energy-optimized path solution can be obtained. Simulation results show that the anisotropy-based heat method is able to find a good trajectory in both static and dynamic clutter fields (including uncertain obstacles and changing currents). Compared with the fast marching (FM) algorithm, the anisotropy-based heat method is not only robust, flexible, and simple to implement, but it also greatly saves time consumption and memory footprint in a time-variant environment. Finally, the evaluation criteria of paths are proposed in terms of length, arrival time, energy consumption, and smoothness.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2021, 31, 2; 289-301
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Path planning for an autonomous underwater vehicle in a cluttered underwater environment based on the heat method
Autorzy:
Sun, Kaiyue
Liu, Xiangyang
Powiązania:
https://bibliotekanauki.pl/articles/1838202.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
autonomous underwater vehicle
path planning
heat method
heat diffusion
cost function
autonomiczny pojazd podwodny
planowanie trasy
dyfuzja ciepła
funkcja kosztu
Opis:
This paper proposes a novel autonomous underwater vehicle path planning algorithm in a cluttered underwater environment based on the heat method. The algorithm calculates the isotropic and anisotropic geodesic distances by adding the direction and magnitude of the currents to the heat method, which is named the anisotropy-based heat method. Taking account of the relevant influence of the environment on the cost functions, such as currents, obstacles and turn of the vehicle, an efficient collision-free and energy-optimized path solution can be obtained. Simulation results show that the anisotropy-based heat method is able to find a good trajectory in both static and dynamic clutter fields (including uncertain obstacles and changing currents). Compared with the fast marching (FM) algorithm, the anisotropy-based heat method is not only robust, flexible, and simple to implement, but it also greatly saves time consumption and memory footprint in a time-variant environment. Finally, the evaluation criteria of paths are proposed in terms of length, arrival time, energy consumption, and smoothness.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2021, 31, 2; 289-301
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Określanie parametrów termofizycznych polimetakrylanu metylu, polistyrenu oraz stali stopowej 1H18N9T metodą chwilowego źródła ciepła
Identification of thermophysical parameters (PMMA), extruded polystyrene (XPS) and alloy steel 1H18N9T by using a heat pulse method
Autorzy:
Zmywaczyk, J.
Koniorczyk, P.
Gaj, J.
Powiązania:
https://bibliotekanauki.pl/articles/209633.pdf
Data publikacji:
2007
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
nieustalone przewodzenie ciepła
przewodność cieplna
dyfuzyjność cieplna
pojemność cieplna
materiały termoizolacyjne
kompleksowe badania właściwości termofizycznych
metoda chwilowego źródła ciepła
heat transfer
thermal conductivity
thermal diffusivity
heat capacity
thermal insulation
heat pulse method
Opis:
W pracy przedstawiono metodę chwilowego źródła ciepła do jednoczesnego określania trzech parametrów termofizycznych przewodności cieplnej k, dyfuzyjności a oraz ciepła właściwego cp w czasie jednego pomiaru. Metoda jest obecnie stosowana na świecie nie tylko dla materiałów termoizolacyjnychale również dla stopów metali. Cechuje ją krótki czas pomiaru. Szczególnie ważna jest metodologia badań. W ostatnich latach dokonał się w tym zakresie duży postęp. W pracy przedstawiono wyniki badań k, a i cp dla polimetakrylanu metylu, tzw. pleksiglasu (PMMA), polistyrenu ekstrudowanego firmy BASF (XPS 3035 CS) oraz stali stopowej 1H18N9T. Badania k, a i cp w funkcji grubości próbki przeprowadzono w temperaturze pokojowej dla próbek w kształcie walca o średnicy 50 mm dla PMMA, 1H18N9T i 200 mm dla XPS. Grubości próbek zawierały się w granicach od 2 mm do 30 mm.
A heat pulse method is presented for simulatneous determination of three thermophysical parameters, i. e., the thermal conductivity k, the thermal diffusivity a, and the specific heat cp. All of the thermophysical parameters were determined during a single measurement for a given sample thickness. The method is now commonly used not only for hear insulating materials but also for metal alloys as well. As advantages of the method one can include its wide application possibilities and a short time of measurement duration. The methodology is of vital importance. The paper presents the measurement results of k, a, and cp for plexiglass (PMMA), extruded polystyrene (XPS), and alloy steel 1H18N9T.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2007, 56, 3; 243-256
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Cartan-Monge geometric approach to the generalized characteristics method and its application to the heat equation Ut - Uxx = 0
Autorzy:
Golenia, J.
Prykarpatsky, Y. A.
Wachnicki, E.
Powiązania:
https://bibliotekanauki.pl/articles/255525.pdf
Data publikacji:
2009
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
characteristics method
heat equation
Opis:
The generalized Cartan-Monge type approach to the characteristics method is discussed from the geometric point of view. Its application to the classical one-dimensional linear heat equation Ut - uxx = 0 is presented. It is shown that the corresponding exact solution of the Cauchy problem can be represented in a classical functional-analytic Gauss type form.
Źródło:
Opuscula Mathematica; 2009, 29, 1; 27-39
1232-9274
2300-6919
Pojawia się w:
Opuscula Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical modelling of heat transfer in spherical domains by means of the BEM using discretisation in time
Model numeryczny przepływu ciepła w obszarach sferycznych z wykorzystaniem kombinowanej metody elementów brzegowych
Autorzy:
Mochnacki, B.
Szopa, R.
Powiązania:
https://bibliotekanauki.pl/articles/281477.pdf
Data publikacji:
2002
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
heat transfer
boundary element method
Opis:
A combined variant of the BEM called in literature the BEM using discretization in time consists in an approximation of the time derivative appearing in Fourier's equation by an adequate differential quotient. The next steps of mathematical manipulations and also the numerical algorithm are similar to a typical boudary element approach. In the paper the method is applied to numerical computations concerning a non-steady heat diffusion in homogeneous and non-homogeneous spherical domains. In the final part of the paper the results of computations are presented.
Kombinowany wariant metody elementów skończonych, nazywany w literaturze MEB, z dyskretyzacją czasu polega na zastąpieniu występującej w równaniu Fouriera pochodnej temperatury po czasie odpowiednim ilorazem różnicowym. Dalsze etapy przekształceń matematycznych i konstrukcji algorytmu numerycznego nie odbiegają od typowego podejścia charakteryzującego klasyczną metodę elementów brzegowych. W pracy metodę kombinowaną wykorzystano do modelowania nieustalonej dyfuzji ciepła w obszarach sferycznych jednorodnych i niejednorodnych. W końcowej części przedstawiono przykłady obliczeń numerycznych.
Źródło:
Journal of Theoretical and Applied Mechanics; 2002, 40, 2; 357-370
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The temperature distribution of the materials in the convective heat transfer
Autorzy:
Pavlenko, A.
Powiązania:
https://bibliotekanauki.pl/articles/402531.pdf
Data publikacji:
2015
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
heat equation
method for solving
Opis:
A new method for solving the equations of thermal conductivity materials with specific properties. This method is useful for an approximate estimate of the temperature field of materials.
Źródło:
Structure and Environment; 2015, 7, 4; 185-188
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of the Heat Transfer Coefficient at the Charge Surface Heated on the Chamber Furnace
Autorzy:
Gołdasz, A.
Malinowski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/356595.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat transfer coefficient
inverse method
finite element method
Opis:
The inverse method was applied to determine the heat flux reaching the charge surface. The inverse solution was based upon finding the minimum of the error norm between the measured and calculated temperatures. The charge temperature field was calculated with the finite element method by solving the heat transfer equation for a square charge made of 15HM steel heated on all its surfaces. On the basis of the mean value of heat flux, the value of the heat transfer coefficient at each surface was determined depending on the surface temperature of the material heated.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2A; 509-513
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A sequential and global method of solving an inverse problem of heat conduction equation
Sekwencyjna i globalna metoda rozwiązania zagadnienia odwrotnego dla równania przewodnictwa ciepła
Autorzy:
Ciałkowski, M.
Grysa, K.
Powiązania:
https://bibliotekanauki.pl/articles/280136.pdf
Data publikacji:
2010
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
inverse problem
heat conduction
sequential method
global method
Opis:
The paper presents a solution to an inverse problem based on the analy- tical form of the direct problem solution in the convolutional form. The analytical form T (r, t) is a surface that is fitted to temperature patterns measured (and charged with errors) at the internal points. In the case of quickly-varying patterns, the solution to the inverse problem is highly sen- sitive to measurement errors (short sampling times). In order to obtain reliable results, the method of sequential (step by step) and global solving of the inverse problem was used together with smoothing the measurement results with the help of hyperbolic spline functions. The numerical results confirm effectiveness of the methods presented in the paper.
W pracy przedstawiono rozwiązanie zagadnienia odwrotnego w oparciu o analityczną postać rozwiązania zagadnienia prostego w postaci splotowej. Ta postać analityczna T (r, t) jest powierzchnią, która jest dopasowywana do przebiegów temperatury pomierzonej (obciążonej błędem) w punktach wewnętrznych. Dla przebiegów szybkozmiennych rozwiązanie zagadnienia odwrotnego jest bardzo wrażliwe na błędy pomiarów (małe czasy próbkowania). Dla otrzymania wiarygodnych wyników zastosowano metodę sekwencyjnego (z kroku na krok) i globalnego rozwiązywania zagadnienia odwrotnego w połączeniu z wygładzaniem wyników pomiarowych za pomocą hiperbolicznych funkcji sklejanych. Wyniki obliczeń numerycznych potwierdzają efektywność przedstawionych metod.
Źródło:
Journal of Theoretical and Applied Mechanics; 2010, 48, 1; 111-134
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An efficient analysis of steady-state heat conduction involving curved line/surface heat sources in two/three-dimensional isotropic media
Autorzy:
Mohammadi, M.
Hematiyan, M. R.
Shiah, Y. C.
Powiązania:
https://bibliotekanauki.pl/articles/279914.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
heat conduction
concentrated heat source
curved heat source
mesh-free method
Opis:
In this paper, a new formulation based on the method of fundamental solutions for two/three- -dimensional steady-state heat conduction problems involving internal curved line/surface heat sources is presented. Arbitrary shapes and non-uniform intensities of the curved heat sources can be modeled by an assemblage of several parts with quadratic variations. The presented mesh-free modeling does not require any internal points as in domain methods. Four numerical examples are studied to verify the validity and efficiency of the proposed method. Our analyses have shown that the presented mesh-free formulation is very efficient in comparison with conventional boundary or domain solution techniques.
Źródło:
Journal of Theoretical and Applied Mechanics; 2018, 56, 4; 1123-1137
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heat Flux Identification at the Charge Surface During Heating in Chamber Furnace
Autorzy:
Gołdasz, A.
Malinowski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/351346.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat flux
inverse method
finite element method
chamber furnace
Opis:
In this study, a method of determining the heat flux, which reaches the surface of a charge, has been presented with the use of an inverse analysis. The research on the heating process of a square 15HM steel charge was conducted in a natural gas-fired laboratory furnace. The inverse solution was based on the search of the minimum standard error between the measured and the calculated temperatures. The temperature of the charge has been calculated by the finite element method, solving the heat conduction equation for a square charge heated on all the surfaces. As a result, the mean value of the heat flux on each of the heated surfaces of the charge was estimated.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 4; 2021-2026
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of thermal processes occuring in tissue with a tumor region using bem
Wykorzystanie MEB do analizy procesów cieplnych w tkance zaatakowanej nowotworem.
Autorzy:
Majchrzak, E.
Mochnacki, B.
Powiązania:
https://bibliotekanauki.pl/articles/282077.pdf
Data publikacji:
2002
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
bio-heat transfer
boundary element method
Opis:
In the paper a numerical algorithm based on the boundary element method is used for temperature field computations in the non-homogeneous domain being a composition of healthy tissue and a tumor region. Thermophysical parameters of subdomains, in particular the perfusion coefficients and metabolic heat sources are different. From the mathematical point of view the problem is described by a system of two Poisson's equations with temperature-dependent source functions. These equations are supplemented by adequate boundary conditions. The discussed algorithm allows one to determine the temperature distribution on the surface of the skin. In this way it is possible to analyse the dependence brtween the geometrical features of the tumor region and the external thermal effects. The results can be useful as the information for noninvasive diagnostics. In the final part of the paper examples of computations are shown.
Algorytm numeryczny bazujący na metodzie elementów brzegowych wykorzystano do obliczeń rozkładów remperatury w obszarze niejednorodnym, składającym się ze zdrowej tkanki i podobszaru nowotworowego. Parametry termofizyczne tych podobszarów są zróżnicowane, a w szczególności różnią się współczynniki perfuzji krwi oraz składniki źródłowe związane z metabolizmem. Z matematycznego punktu widzenia rozważane zagadnienie opisane jest układem dwóch równań z zależnymi od temperatury składnikami źródłowymi. Równania te uzupełniają odpowiednie warunki brzegowe. Przedstawiony algorytm pozwala określić rozkład temperatury na powierzchni tkanki skórnej. W ten sposób można analizować zależności między wielkością, kształtem i położeniem podobszaru nowotworowego, a zewnętrznymi efektami termicznymi. Uzyskane wyniki mogą być przydatne w diagnostyce nieinwazyjnej. W końcowej części artykułu przedstawiono przykłady obliczeń.
Źródło:
Journal of Theoretical and Applied Mechanics; 2002, 40, 1; 101-112
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of heat transfer oriented surfaces by thermovision and using CFD method
Autorzy:
Kapjor, A.
Smatanová, H.
Hužvár, J.
Greššak, T.
Jandačka, J.
Powiązania:
https://bibliotekanauki.pl/articles/402248.pdf
Data publikacji:
2013
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
heat transfer
natural convection
CFD method
Opis:
The paper presents applications of infrared measurements. It discusses the use of thermovision and CFD method in the analysis of heat transfer in experimental measurement with natural convection.
Źródło:
Structure and Environment; 2013, 5, 4; 41-44
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heat transfer in compact cross-flow mini heat exchanger
Autorzy:
Prończuk, Mateusz
Pabiś, Aleksander
Powiązania:
https://bibliotekanauki.pl/articles/27315660.pdf
Data publikacji:
2023
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
heat transfer
cross-flow
mini heat exchanger
optimization based method
Opis:
This paper presents the results of an analysis of heat transfer in a cross-flow mini heat exchanger (CFMHE). The purpose of the paper was to analyze the results of the experimental measurements presented in the previous work in order to determine dimensionless correlations that allow for the calculation of heat transfer coefficients for the CFMHE. Analyzed CFMHE consisted of a brass cylindrical core, in which 2 mm circular holes were drilled. A method based on an optimization procedure was used to determine the correlations describing the heat transfer coefficients, allowing the correlations to be determined without the need of measuring the mini channel wall temperature. Overall heat transfer coefficients calculated using the proposed correlations typically did not deviate by more than ±10% from the corresponding experimental results, which was a significant improvement in the quality of the fit compared to the results presented in previous work.
Źródło:
Polish Journal of Chemical Technology; 2023, 25, 3; 79--88
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of changes in the thickness of a perforated plate of the heat exchanger on its structural stability
Wpływ zmian grubości płyty perforowanej wymiennika ciepła na stateczność konstrukcji
Autorzy:
Chudzik, A.
Świniarski, J.
Powiązania:
https://bibliotekanauki.pl/articles/282061.pdf
Data publikacji:
2004
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
finite element method
heat exchangers
heating pipes
Opis:
One of the most important elements of heat exchangers are perforated bottoms. These are perforated plates of significant thickness, in which heating cartridge pipes are mounted. For the designers of heat exchangers, the strength analusis of the connection between the elements, which allows for the determination of the state of stress and calculation of displacements of the perforated bottom after fixing the pipes in it, is of special importance. It results from carried out computations that the maximum reduced stresses in the perforated bottom are significantly lower than the values of admissible stresses. In this paper, computations of stresses and strains for various thicknesses of the perforated bottom have been presented. As a results of a decrease in the thickness of the perforated bottom, its deflectionincrease, and thus the heating system pipes are more exposed to strains and losses of stability.
Jednym z istotnych elementów wymiennika ciepła są dna sitowe - płyty perforowane o znacznej grubości, w których zamocowane są rurki wkładu grzewczego. Dla konstruktorów wymienników ciepła istotna jest analiza wytrzymałościowa połączenia pozwalająca na określenie stanu naprężeń oraz obliczenie przemieszczeń dna sitowego po zamocowaniu rurek. Z przeprowadzonych obliczeń wynika, że maksymalne naprężenia zredukowane w dnie sitowym są dużo niższe od wartości naprężeń dopuszczalnych. W pracy przedstawiono obliczenia naprężeń i odkształceń dla różnych grubości dna sitowego. Na skutek zmniejszenia grubości dna sitowego zwiększa się jego napięcia, przez co rurki wkładu grzewczego bardziej są narażone na utratę stateczności.
Źródło:
Journal of Theoretical and Applied Mechanics; 2004, 42, 2; 325-334
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of Heat Transfer at the Solid to Solid Interface
Autorzy:
Rywotycki, M.
Malinowski, Z.
Falkus, J.
Sołek, K.
Szajding, A.
Miłkowska-Piszczek, K.
Powiązania:
https://bibliotekanauki.pl/articles/958225.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat transfer
inverse method
solid - solid interface
Opis:
In technological process of steel industry heat transfer is a very important factor. Heat transfer plays an essential role especially in rolling and forging processes. Heat flux between a tool and work piece is a function of temperature, pressure and time. A methodology for the determination of the heat transfer at solid to solid interface has been developed. It involves physical experiment and numerical methods. The first one requires measurements of the temperature variations at specified points in the two samples brought into contact. Samples made of C45 and NC6 steels have been employed in physical experiment. One of the samples was heated to an initial temperature of: 800°C, 1000°C and 1100°C. The second sample has been kept at room temperature. The numerical part makes use of the inverse method for calculating the heat flux and at the interface. The method involves the temperature field simulation in the axially symmetrical samples. The objective function is bulled up as a dimensionless error norm between measured and computed temperatures. The variable metric method is employed in the objective function minimization. The heat transfer coefficient variation in time at the boundary surface is approximated by cubic spline functions. The influence of pressure and temperature on the heat flux has been analysed. The problem has been solved by applying the inverse procedure and finite element method for the temperature field simulations. The self-developed software has been used. The simulation results, along with their analysis, have been presented.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 1; 341-346
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of the assumed thermophysical properties of steel on the heat transfer calculation result in contact phenomena
Autorzy:
Rywotycki, Marcin
Malinowski, Zbigniew
Przyłucka, Aleksandra
Sołek, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/29520236.pdf
Data publikacji:
2020
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
heat transfer
inverse method
solid surface contact
Opis:
The article presents a model of heat transfer between two solid surfaces remaining in contact under the effect of the force applied. The presented results were obtained from the authors’ own studies conducted with the application of a new method of determining the heat flux transferred between these surfaces. The method consists of two stages: the experiment and numerical calculations. The experimental tests include temperature measurements in specific points in two samples remaining in contact with each other. The numerical part uses the inverse solution and the finite element method for the calculation of the heat flux on the contact surface. An analysis was performed on the effect of the steel grade used in the tests on the result of heat transfer determination in contact phenomena. The calculations were conducted with the application of proprietary software using the inverse method integrated with FEM.
Źródło:
Computer Methods in Materials Science; 2020, 20, 4; 165-172
2720-4081
2720-3948
Pojawia się w:
Computer Methods in Materials Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of heat transfer on peristaltic flow in presence of heat generation against higher value of Reynolds number using FEM
Autorzy:
Javed, Tariq
Hamid, Abdul H.
Ahmed, Bilal
Ali, Nasir
Powiązania:
https://bibliotekanauki.pl/articles/1839717.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
finite element method
peristaltic flow
heat transfer
Opis:
In the present investigation, heat transfer analysis of peristaltic flow in the presence of heat generation against high values of the Reynolds number using a numerical technique is presented. The Finite Element Method with the assistance of Galerkin’s variational method has been used on the governing Navier-Stokes equation in the stream-vorticity form. The graphs of computed longitudinal velocity, temperature distribution and pressure rise per wavelength are plotted against different values of an emerging parameter using a stream function and vorticity. The presented results are valid beyond the restrictions of long wavelength and low Reynolds number limits. Moreover, large values of the Reynolds number increases pressure rise per wavelength.
Źródło:
Journal of Theoretical and Applied Mechanics; 2021, 59, 2; 279-292
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal performance of porous fins with temperature-dependent heat generation via the homotopy perturbation method and collocation method
Autorzy:
Hoshyar, H. A.
Rahimipetroudi, I.
Ganji, D. D.
Majidian, A. R.
Powiązania:
https://bibliotekanauki.pl/articles/122933.pdf
Data publikacji:
2015
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
collocation method
homotopy perturbation method
porous fin
temperature-dependent heat generation
Opis:
An analysis has been performed to study the problem of the thermal performance of a nonlinear problem of the porous fin with temperature-dependent internal heat generation. Highly accurate semi-analytical methods called the collocation method (CM) and the homotopy perturbation method (HPM) are introduced and then are used to obtain a nonlinear temperature distribution equation in a longitudinal porous fin. This study is performed using passage velocity from the Darcy’s model to formulate the heat transfer equation through porous media. The heat generation is assumed to be a function of temperature. The effects of the natural convection parameter Nc, internal heat generation εg, porosity Sh and generation number G parameter on the dimensionless temperature distribution are discussed. Also, numerical calculations called the fourth order Runge-Kutta method were carried out for the various parameters entering into the problem for validation. Results reveal that analytical approaches are very effective and convenient. Also it is found that these methods can achieve more suitable results compared to numerical methods.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2015, 14, 4; 53-65
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of coolant velocity on the local heat transfer coefficient during steel quenching
Autorzy:
Szajding, Artur
Gołdasz, Andrzej
Telejko, Tadeusz
Powiązania:
https://bibliotekanauki.pl/articles/29520233.pdf
Data publikacji:
2020
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
inverse method
heat transfer coefficient
boundary condition
quenching
Opis:
The results of the calculations of the local heat transfer coefficient HTC and a heat flux HF on the face of a cylindrical sample made of 1.0503 steel are presented. The sample was cooled from a temperature of approx. 930°C in a mineral oil having a temperature equal to 50°C. The experiments were performed for three speeds of the oil stream (0.2, 0.4 and 0.6 m/s). The oil stream was directed perpendicularly to the cooled surface. The temperature of each sample was measured with 4 thermocouples and recorded with a frequency of 10 Hz. The maximum values of HTC always occurred in the axis of the sample and were in the range of 8000 to 10,000 W/(m2 K). The results are presented in the form of useful graphs showing the dependence of HTC and HF on the surface temperature for various velocities of cooling oil. The calculations were made with self-developed software using the inverse solution of the boundary heat conduction problem.
Źródło:
Computer Methods in Materials Science; 2020, 20, 4; 157-164
2720-4081
2720-3948
Pojawia się w:
Computer Methods in Materials Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical modelling of bio-heat transfer using the boundary element method
Modelowanie numeryczne przepływu bio-ciepła za pomocą metody elementów brzegowych
Autorzy:
Majchrzak, E.
Powiązania:
https://bibliotekanauki.pl/articles/281250.pdf
Data publikacji:
1998
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
boundary element method
bio-heat transfer
numerical simulation
Opis:
Numerical models of heat transfer processes proceeding in a biological tissue subjected to a strong external thermal interaction are discussed. In this case one can consider diametrically different phenomena; such as burns resulting from thermal contact of the skin with an external heat source, or the freezing process of biological tissue used in cryosurgery. From the mathematical point of view these processes belong to the group of boundary-initial problems described by the diffusion equation and adequate boundary-initial conditions. At the stage of numerical realization the boundary element method can be applied and such an approach is discussed in this paper.
W pracy przedstawiono opisy matematyczne i modele numeryczne procesów cieplnych zachodzących w tkance biologicznej poddanej silnym termicznym oddziaływaniom zewnętrznym. Można tu rozpatrywać skrajnie różne zjawiska, takie jak oparzenia wynikające z kontaktu skóry z zewnętrznym źródłem ciepła, lub też proces zamrażania tkanki w czasie zabiegu kriochirurgicznego. Z matematycznego punktu widzenia procesy te należą do grupy zadań brzegowo-początkowych opisanych równaniami dyfuzji i odpowiednimi warunkami jednoznaczności. Na etapie realizacji numerycznej można wykorzystać metodę elementów brzegowych i takie właśnie podejście jest prezentowane w niniejszej pracy.
Źródło:
Journal of Theoretical and Applied Mechanics; 1998, 2; 437-455
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical investigation of pool nucleate boiling in nanofluid with lattice Boltzmann method
Autorzy:
Rostamzadeh, A.
Jafarpur, K.
Rad, E. G.
Powiązania:
https://bibliotekanauki.pl/articles/949317.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
pool boiling
nanofluid
lattice Boltzmann method
heat transfer
Opis:
Due to significant improvement of thermal performance and other properties of nanofluids, this group of liquids is in high demand. According to the literature, the effect of nanoparticles on boiling heat transfer enhancement or degradation is not the same among different investigations. In the present article, the pseudo-potential multiphase lattice Boltzmann method is used to simulate nucleate pool boiling with two different fluids: a pure liquid and a nanofluid. The current results indicate that the contact angle is the same for both the fluid and nanofluid when the vapor bubble detachment occurs. Also, bubble departure diameter is greater in the base liquid while bubble release frequency is higher in the nanofluid. In brief, the present results demonstrate that using a nanofluid instead of its base fluid will increase the boiling heat transfer coefficient.
Źródło:
Journal of Theoretical and Applied Mechanics; 2016, 54, 3; 811-825
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Eco-innovative method of cleaning heat exchangers from boiler scale
Autorzy:
Olczak, Piotr
Kowalski, Zygmunt
Kulczycka, Joanna
Makara, Agnieszka
Powiązania:
https://bibliotekanauki.pl/articles/406832.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat exchanger
chemical treatment method
eco-innovative
boiler
Opis:
The operation of thermal devices and installations, in particular heat exchangers, is associated with the formation of various deposits of sediments, forming the boiler scale. The amount of precipitate depends on the quality of the flowing liquids treatment, as well as the intensity of the use of devices. There are both mechanical and chemical treatment methods to remove these deposits. The chemical methods of boiler scale treatment include the cleaning method consisting in dissolving boiler scale inside heat devices. Worked out descaling concentrate contains phosphoric acid (V) and the components that inhibit corrosion, anti-foam substances, as well as anti-microbial substances as formalin, ammonium chloride, copper sulphate and zinc sulfate. Dissolution of the boiler scale results in the formation of wastewater which can be totally utilized as raw materials in phosphoric fertilizer production. As a result, both the preparation produced and its use are entirely free from waste.
Źródło:
Management and Production Engineering Review; 2020, 11, 1; 23--30
2080-8208
2082-1344
Pojawia się w:
Management and Production Engineering Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical modelling of the transient heat transport in 2D silicon thin film using the interval lattice Boltzmann method
Autorzy:
Piasecka-Belkhayat, A.
Korczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/122654.pdf
Data publikacji:
2014
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
heat transport
interval lattice Boltzmann method
transport ciepła
Opis:
In the paper the description of numerical analysis of the heat transfer process proceeding in a two-dimensional silicon thin film is presented. It is assumed that some parameters like relaxation time and boundary temperatures appearing in the mathematical model of the analyzed problem are given as intervals. The discussed problem has been solved using the interval form of the lattice Boltzmann method applying the rules of the directed interval arithmetics. In the final part of the paper, the results of numerical computations are shown.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2014, 13, 2; 95-103
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The inverse determination of volume fraction of fibres in reinforced composite with imperfect thermal contact between constituents
Odwrotne określenie objętościowego udziału włókien we wzmocnionym kompozycie z niedoskonałym kontaktem termicznym pomiędzy składnikami
Autorzy:
Mierzwiczak, M.
Kołodziej, J. A.
Powiązania:
https://bibliotekanauki.pl/articles/279324.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
effective thermal conductivity
inverse heat transfer problem
boundary collocation method
Newton method
Opis:
The paper considers the problem of determination of the volume fraction of fibres in an unidirectionally reinforced composite in order to provide the appropriate effective thermal conductivity. The problem formulated in such a way should be treated as an inverse heat transfer problem. The thermal conductivities of constituents (fibres and matrix) and fibres arrangement are known. The calculations are carried out for an imperfect thermal contact between the fibres and matrix.
W pracy rozważa się problem określenia objętościowego udziału włókien w jednokierunkowo wzmocnionym kompozycie w celu uzyskania odpowiedniego efektywnego współczynnika przewodzenia ciepła. Problem sformułowany w ten sposób jest traktowany jako odwrotny problem przewodzenia ciepła. Współczynniki przewodzenia ciepła składników (włókien i matrycy) oraz sposób ułożenia włókien są znane. Obliczenia są wykonane dla niedoskonałego kontaktu termicznego pomiędzy włóknami i matrycą.
Źródło:
Journal of Theoretical and Applied Mechanics; 2011, 49, 4; 987-1001
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Estimation of distribution of moving heat source during milling of AISIH13 by inverse heat conduction method
Autorzy:
Farahani, Somayeh D.
Powiązania:
https://bibliotekanauki.pl/articles/279414.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
milling
inverse method
moving plane heat source
moving point heat source
cutting temperature
Opis:
This study presents an inverse heat transfer method to estimate the time history of a local heat flow into the work-piece during milling of AISIH13 with considering a 3D thermal model. Temperatures are measured using thermocouples within the work-piece providing input data for the inverse solver. The conjugate gradient method is used as an inverse solver to predict the local time dependent heat flow distribution on the cutting surfaces as well as the temperature distribution in the work-piece. A moving point heat source and a moving plane heat source with different heat source velocity is considered to investigate their influence on the estimated heat flow. Results indicate a good agreement between the experimental and estimated data with an average root mean square error less than 0.2 ◦C. It can be observed that the heat flow distribution is a function of heat source geometry, cutting speed and feed rate, but the temperature distribution is a weak function of geometry of the moving heat source. Changes of temperature with depth are studied. This study suggests that the developed inverse model can be successfully applied for estimating the heat flow and thermal field in the work-piece during milling.
Źródło:
Journal of Theoretical and Applied Mechanics; 2019, 57, 4; 1081-1093
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Interval boundary element method for transient diffusion problem in two-layered domain
Przedziałowa metoda elementów brzegowych dla zadań dyfuzji w obszarach dwuwarstwowych
Autorzy:
Piasecka-Belkhayat, A.
Powiązania:
https://bibliotekanauki.pl/articles/280879.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
directed interval arithmetic
interval boundary element method
heat transfer
Opis:
In the paper, the description of an unsteady heat transfer for one- dimensional problem proceeding in a two-layered domain is presented. It is assumed that all thermophysical parameters appearing in the mathematical description of the problem analysed are given as directed interval values. The problem discussed has been solved using the 1st scheme of the interval boundary element method. The interval Gauss elimination method has been applied to solve the obtained interval system of equations. In the final part of the paper, results of numerical computations are shown.
W pracy przedstawiono opis nieustalonego przepływu ciepła dla zadań jednowymiarowych w obszarach dwuwarstwowych. Założono, że wszystkie parametry termofizyczne pojawiające się w opisie matematycznym analizowanego zadania są wartościami przedziałowymi skierowanymi. Omawiane zagadnienie zostało rozwiązane za pomocą pierwszego schematu przedziałowej metody elementów brzegowych. Do rozwiązania otrzymanego interwałowego układu równań zastosowano przedziałową metodę eliminacji Gaussa. W końcowej części pracy pokazano wyniki obliczeń numerycznych.
Źródło:
Journal of Theoretical and Applied Mechanics; 2011, 49, 1; 265-276
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of heat diffusion in composites
Autorzy:
Bondyra, A.
Powiązania:
https://bibliotekanauki.pl/articles/243729.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
finite element method
glass reinforced composites
heat diffusion
fire
Opis:
Composites structures are widely using in varied fields of industry, where it has to take into account changes of temperature or it is possibility of fire hazards. Heat transfer and fire conditions in composites are very often analysis issues nowadays. A large amount of research in area of modelling heat transfer and fire loading of composites has been performed for both experimental studies and modelling and simulation. The most common areas of analysis of thermal composite structures are: multiscale modelling of heat transfer, simultaneous fire and mechanical loading, fire involved failure and temperature distribution under fire and elevated temperature conditions. This paper presents analysis of heat transfer in composites with taking into account their shape and thickness. The models include a convection mode of heat transfer. The first composite plate is 10 cm wide by 10 cm tall with a thickness of 1 cm. The modified structure has also second part, smaller plate on top 5 cm wide by 5 cm in right corner. They made of glass/vinylester composite. The plates are heating in one, two and three directions. The results are shown in forms of contours of temperature distribution and thermal gradient. Comparison of results for the modelled structures shows differences in the shape and thickness of the analysed structure.
Źródło:
Journal of KONES; 2013, 20, 3; 63-69
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Time integration of stochastic generalized equations of motion using SSFEM
Autorzy:
Poński, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/280057.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
spectral stochastic finite element method
time integration
heat waves
Opis:
The paper develops an integration approach to stochastic nonlinear partial differential equations (SPDE’s) with parameters to be random fields. The methodology is based upon assumption that random fields are from a special class of functions, and can be described as a product of two functions with dependent and independent random variables. Such an approach allows one to use Karhunen-Lo`eve expansion directly, and the modified stochastic spectral finite element method (SSFEM). It is assumed that a random field is stationary and Gaussian while the autocovariance function is known. A numerical example of onedimensional heat waves analysis is shown.
Źródło:
Journal of Theoretical and Applied Mechanics; 2019, 57, 1; 37-48
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of heat flux at a solid-solid intreface
Autorzy:
Rywotycki, M.
Malinowski, Z.
Sołek, K.
Falkus, J.
Miłkowska-Piszczek, K.
Powiązania:
https://bibliotekanauki.pl/articles/356275.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
continuous casting of steel
heat transfer
inverse method
rolls
Opis:
Determining the boundary conditions of heat transfer in steel manufacturing is a very important issue. The heat transfer effect during contact of two solid bodies occurs in the continuous casting steel process. The temperature fields of solids taking part in heat transfer are described by the Fourier equation. The boundary conditions of heat transfer must be determined to get an accurate solution to the heat conduction equation. The heat flux between the tool and the object processed depends mainly on temperature, pressure and time. It is very difficult and complicated to accomplish direct identification and determination of the boundary conditions in this process. The solution to this problem may be the construction of a process model, performing measurements at a test stand, and using numerical methods. The proposed model must be verified on the basis of parameters which can easily be measured in industrial processes. One of them is temperature, which may be used in inverse methods to determine the heat transfer coefficient. This work presents the methodology for determining the heat flux between two solid bodies staying in contact. It consists of two stages – the experiment and the numerical computation. The problem was solved by using the finite element method (FEM) and a numerical program developed at AGH University of Science and Technology in Krakow. The findings of the conducted research are relationships describing the value of the heat flux versus the contact time and surface temperature.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 1; 79-86
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heat conduction problem in a two-layered hollow cylinder by using the Greens function method
Autorzy:
Kukla, S.
Siedlecka, U.
Powiązania:
https://bibliotekanauki.pl/articles/122646.pdf
Data publikacji:
2013
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
heat conduction problem
two-layered cylinder
Green's function method
Opis:
In this paper, a solution of the heat conduction problem in a two-layered hollow cylinder by using the Green’s function method is presented. The considerations concern the heat conduction in the radial direction while taking into account time-dependent boundary conditions. The continuity condition of the temperature at the dividing surface of the layers is written in the form of a Volterra integral equation.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2013, 12, 2; 45-50
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Calculation of distribution of temperature in three-dimensional solid changing its shape during the process
Autorzy:
Bożek, B.
Mączka, C.
Powiązania:
https://bibliotekanauki.pl/articles/255226.pdf
Data publikacji:
2005
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
parabolic partial differential equations
non-stationary distribution of heat
finite element method
Galerkin method
Opis:
The present paper suplements and continues [2]. Galerkin method for the Fourier-Kirchoff equation in the case when Omega(t) - equation domain, dependending on time t, is constructed. For special case Omega(t) rcup R2 the computer program for above method is written. Binaries and sources of this program are available on http://wms.mat.agh.edu.pl/~bozek.
Źródło:
Opuscula Mathematica; 2005, 25, 2; 169-179
1232-9274
2300-6919
Pojawia się w:
Opuscula Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Implicite finite difference method for time fractional heat equation with mixed boundary conditions
Schemat niejawny metody różnic skończonych dla równania przewodnictwa ciepła z pochodną rzędu ułamkowego względem czasu z mieszanymi warunkami brzegowymi
Autorzy:
Brociek, R.
Powiązania:
https://bibliotekanauki.pl/articles/87351.pdf
Data publikacji:
2014
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
metoda różnic skończonych
przewodnictwo cieplne
równanie przewodnictwa ciepła
finite difference method
heat conductivity
heat equation
Opis:
W artykule przedstawiono zastosowanie schematu niejawnego metody różnic skończonych do przybliżonego rozwiązania równania przewodnictwa ciepła z pochodną rzędu ułamkowego względem czasu oraz mieszanymi warunkami brzegowymi. W szczególności rozpatrywane są niejednorodne warunki brzegowe Neumanna oraz Robina. Przedstawione zostały również przykłady obliczeniowe ilustrujące dokładność metody.
This paper describes an application of the implicit finite difference method for solving the time fractional heat equation with mixed boundary conditions. In particular, the differential scheme will be presented for the non-homogeneous Neumann and Robin boundary conditions. To illustrate the accuracy of described method some computational examples will be presented as well.
Źródło:
Zeszyty Naukowe. Matematyka Stosowana / Politechnika Śląska; 2014, 4; 73-87
2084-073X
Pojawia się w:
Zeszyty Naukowe. Matematyka Stosowana / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Verification of heat flux and temperature calculation on the control rod outer surface
Autorzy:
Taler, J.
Cebula, A.
Powiązania:
https://bibliotekanauki.pl/articles/240728.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
strumień ciepła
temperatura
wymiana ciepła
metoda inwersji
CFD
heat flux
heat transfer
inverse method
temperature
Opis:
The paper presents heat transfer calculation results concerning a control rod of Forsmark Nuclear Power Plant (NPP). The part of the control rod, which is the object of interest, is surrounded by a mixing region of hot and cold flows and, as a consequence, is subjected to thermal fluctuations. The paper describes a numerical test which validates the method based on the solution of the inverse heat conduction problem (IHCP). The comparison of the results achieved by two methods, computational fluid dynamics (CFD) simulations and IHCP, including a description of the IHCP method used in the calculation process, shows a very good agreement between the methods.
Źródło:
Archives of Thermodynamics; 2011, 32, 3; 157-173
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The application of Beck’s method combined with FEM and Trefftz functions to determine the heat transfer coefficient in a minichannel
Autorzy:
Maciejewska, B.
Powiązania:
https://bibliotekanauki.pl/articles/281153.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
Beck’s method
FEM
Trefftz functions
heat transfer coefficient
inverse heat conduction problem
flow boiling
Opis:
The aim of this study is to determine the heat transfer coefficient between the heated surface and the boiling fluid flowing in a minichannel on the basis of experimental data. The calculation model is based on Beck’s method coupled with the FEM and Trefftz functions. The Trefftz functions used in the Hermite interpolation are employed to construct the shape functions in the FEM. The unknown local values of the heat transfer coefficient at the foil- -fluid contact surface are calculated from Newton’s law. The temperature of the heated foil and the heat flux on the foil surface are determined by solving a two-dimensional inverse heat conduction problem. The study is focused on the identification of the heat transfer coefficients in the subcooled boiling region and the saturated nucleate boiling region. The results are compared with the data obtained through the one-dimensional method. The investigations also reveal how the smoothing of measurement data affects calculation results.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 1; 103-116
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recuperator with microjet technology as a proposal for heat recovery from low-temperature sources
Autorzy:
Wajs, J.
Mikielewicz, D.
Fornalik-Wajs, E.
Bajor, M.
Powiązania:
https://bibliotekanauki.pl/articles/240624.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat exchanger
microjet technology
heat recovery
Wilson plot method
wymiennik ciepła
odzysk ciepła
metoda Wilsona
Opis:
A tendency to increase the importance of so-called dispersed generation, based on the local energy sources and the working systems utilizing both the fossil fuels and the renewable energy resources is observed nowadays. Generation of electricity on industrial or domestic scale together with production of heat can be obtained for example through employment of the ORC systems. It is mentioned in the EU directive 2012/27/EU for cogenerative production of heat and electricity. For such systems the crucial points are connected with the heat exchangers, which should be small in size but be able to transfer high heat fluxes. In presented paper the prototype microjet heat exchanger dedicated for heat recovery systems is introduced. Its novel construction is described together with the systematical experimental analysis of heat transfer and flow characteristics. Reported results showed high values of the overall heat transfer coefficient and slight increase in the pressure drop. The results of microjet heat exchanger were compared with the results of commercially available compact plate heat exchanger.
Źródło:
Archives of Thermodynamics; 2015, 36, 4; 49-64
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Solving of the two-dimensional unsteady heat transfer problem by using the homotopy analysis method
Rozwiązywanie dwuwymiarowego niestacjonarnego zagadnienia przewodzenia ciepła przy wykorzystaniu homotopijnej metody analizy
Autorzy:
Brociek, R.
Hetmaniok, E.
Matlak, J.
Słota, D.
Powiązania:
https://bibliotekanauki.pl/articles/87318.pdf
Data publikacji:
2014
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
przewodzenie ciepła
homotopijna metoda analizy
heat conductivity
homotopy analysis method
Opis:
W artykule opisano rozwiązanie dwuwymiarowego niestacjonarnego zagadnienia przewodzenia ciepła przy wykorzystaniu homotopijnej metody analizy. W metodzie tej tworzony jest szereg funkcyjny. Podano warunek wystarczający zbieżności tego szeregu, a także oszacowanie błędu rozwiązania przybliżonego, które uzyskujemy, biorąc sumę częściową szeregu.
In this paper a solution of the two-dimensional unsteady heat transfer problem by using the homotopy analysis method is described. In presented method the functional series is generated. This paper contains the sufficient condition for convergence of this series. We also give the estimation of error of the approximate solution obtained by taking the partial sum of received series.
Źródło:
Zeszyty Naukowe. Matematyka Stosowana / Politechnika Śląska; 2014, 4; 89-102
2084-073X
Pojawia się w:
Zeszyty Naukowe. Matematyka Stosowana / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Discretization of the stationary distribution of heat in the non-homogeneous body
Autorzy:
Bożek, B.
Powiązania:
https://bibliotekanauki.pl/articles/2049973.pdf
Data publikacji:
2004
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
elliptic partial differential equations
stationary distribution of heat
discretization method
Opis:
We give a short survey on the theory of the mixed boundary-value problem for the stationary Fourier equation in a non-homogeneous medium defined on any Lipschitz domain $\Omega \rcup \mathbb{R}^{n} (n \ge 2)$. The compatibility condition for the thermal flux has been established by the standard procedure of integration the divergence.
Źródło:
Opuscula Mathematica; 2004, 24, 1; 19-33
1232-9274
2300-6919
Pojawia się w:
Opuscula Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analytical and numerical solution of the heat conduction problem in the rod
Autorzy:
Węgrzyn-Skrzypczak, E.
Skrzypczak, T.
Powiązania:
https://bibliotekanauki.pl/articles/122856.pdf
Data publikacji:
2017
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
heat conduction equation
Fourier’s method
Finite Element Method
przewodzenie ciepła
metoda Fouriera
metoda elementów skończonych
Opis:
In this paper, the results of analytical and numerical solution of the problem of heat transport in the rod of finite length are presented. The analytical solution is obtained with the use of the Fourier series. The numerical model of the problem is based on the Finite Element Method (FEM). In addition, to check the compatibility of both solutions, distributions of the temperature for selected time moments are compared and discussed.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2017, 16, 4; 79-86
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Implementation of the boundary element method to two-dimensional heat transfer with thermal bridge effects
Autorzy:
Lewandowski, M. T.
Powiązania:
https://bibliotekanauki.pl/articles/1933938.pdf
Data publikacji:
2013
Wydawca:
Politechnika Gdańska
Tematy:
heat transfer
boundary element method
temperature field
thermal bridge
Green's functions
Opis:
The work presents an application of the boundary element method applied to a two-dimensional conductive heat transfer. The algorithm of the method is explained and its advantages are outlined. Green’s function as a fundamental solution for Poisson’s equation in two dimension was used and the direct approach was applied. The presented results concern building construction elements as typical cases of thermal bridges. Some properties of the boundary element method which give new possibilities were considered. For instance, forcing selected values of temperature on inner edges of the considered domain or local increasing of the temperature field resolution. The simulations were performed with the author’s own algorithm.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2013, 17, 1-2; 109-117
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the method of fundamental solutions to the analysis of fully developed laminar flow and heat transfer
Autorzy:
Mrozek, K.
Mierzwiczak, M.
Powiązania:
https://bibliotekanauki.pl/articles/280988.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
laminar flow
finned tube
heat transfer enhancement
method of fundamental solutions
Opis:
In this study, fully developed laminar flow and heat transfer in an internally longitudinally finned tube are investigated through application of the meshless method. The flow is assumed to be both hydrodynamically and thermally developed, with a uniform outside-the-wall temperature. The governing equations have been solved numerically by means of the method of fundamental solutions in combination with the method of particular solutions to obtain the velocity and temperature distributions. The advantage of the proposed approach is that it does not require mesh generation on the considered domain or its boundary, but uses only a cloud of arbitrarily located nodes. The results, comprising the friction factor as well as the Nusselt number, are presented for varied length values and fin numbers, as well as the thermal conductivity ratio between the tube and the flowing fluid. The results show that the heat transfer improves significantly if more fins are used.
Źródło:
Journal of Theoretical and Applied Mechanics; 2015, 53, 3; 505-518
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal and fluid analysis on effects of a nanofluid outside of a stretching cylinder with magnetic field using the Differential Quadrature Method
Autorzy:
Ghasemi, S. E.
Hatami, M.
Salarian, A.
Domairry, G.
Powiązania:
https://bibliotekanauki.pl/articles/281394.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
nanofluids
Differential Quadrature Method (DQM)
heat transfer
streching cylinder
magnetic field
Opis:
In this paper, magnetohydrodynamic flow (MHD) of a nonofluid over a stretching cylinder is investigated numerically. The Differential Quadrature Method (DQM) is applied for solving the governing equations. The influence of relevant parameters such as the magnetic parameter, the solid volume fraction of nanoparticles and the type of nanofluid on the flow, heat transfer, Nusselt number and skin friction coefficient is discussed. Also, comparison with the published results is presented. The results show that the Nusselt number increases with growth in the volume fraction coefficient and Reynolds number but decreases with the magnetic parameter.
Źródło:
Journal of Theoretical and Applied Mechanics; 2016, 54, 2; 517-528
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Lattice Boltzmann simulation of fluid flow in porous media of temperature-affected geometry
Symulacje przepływu metodą siatkową Boltzmanna w ośrodku porowatym o geometrii zależnej od temperatury
Autorzy:
Grucelski, A.
Pozorski, J.
Powiązania:
https://bibliotekanauki.pl/articles/281965.pdf
Data publikacji:
2012
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
lattice Boltzmann method
porous media flow and heat transfer
variable geometry
Opis:
The Lattice Boltzmann method (LBM) has been applied for flow and heat transfer computations. The simulations have been performed with the single-relaxation time model and an advanced formulation of boundary conditions for LBM. For nonsothermal cases, a second distribution function has been used. First, validation tests are reported for heated flow past a single obstacle as well as over a set of regularly and randomly arranged obstacles (grains) that make up a simplified model of a porous medium. The Nusselt number for heat transfer in flow past a single obstacle has been computed. Next, novel simulations of non-isothermal flow in a porous medium of temperature-affected geometry have been undertaken. For the purpose, the thermal dilatation of grains has been accounted for. Results are presented for the pressure head loss and time-varying temperature profiles in the medium. Qualitative computations accomplished to date constitute an encouraging first step to proceed further towards the impact of temperature-affected geometry in such flows, in particular for the coking process.
Metoda siatkowa Boltzmanna (LBM) została zastosowana do obliczeń przepływu i wymiany ciepła. Symulacje zostały przeprowadzone dla modelu z pojedynczym czasem relaksacji oraz zaawansowanego schematu warunków brzegowych metody LB. Dla przepływów nieizotermicznych, użyto dwóch funkcji rozkładu. Przedstawiono obliczenia testowe nieizotermicznego opływu pojedynczej przeszkody, jak również opływu regularnie oraz losowo rozmieszczonych przeszkód (ziaren), które tworzą uproszczony model ośrodka porowatego. Wyznaczono liczbę Nusselta dla przepływu ciepła w opływie pojedynczej przeszkody. Podjęto symulacje połączonych zjawisk (przepływ i wymiana ciepła) dla ośrodka porowatego o zmiennej geometrii przeszkód. W tym przypadku uwzględniono rozszerzalność termiczną ziaren. Zaprezentowano wyniki dla straty ciśnienia oraz zmienne w czasie profile temperatury dla przepływu przez ośrodek. Uzyskane dotąd jakościowe wyniki stanowią pierwszy krok do dalszych badań wpływu zależnej od temperatury geometrii ziaren ośrodka na przebieg takich przepływów, a w szczególności na proces koksowania.
Źródło:
Journal of Theoretical and Applied Mechanics; 2012, 50, 1; 193-214
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wymiana ciepła podczas wrzenia FC-72 w przepływie przez wymiennik ciepła z minikanałem modelowana funkcjami Trefftza i z wykorzystaniem programu ADINA
Flow boiling heat transfer of FC-72 in a heat exchanger containing a minichannel, modelled with Trefftz functions and with the aid of the ADINA program
Autorzy:
Piasecki, A.
Łabędzki, P.
Hożejowska, S.
Piasecka, M.
Powiązania:
https://bibliotekanauki.pl/articles/252687.pdf
Data publikacji:
2016
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
wymiana ciepła
ADINA
metoda Trefftza
wrzenie
heat exchange
Trefftz method
boiling
Opis:
Praca dotyczy wymiany ciepła podczas wrzenia czynnika chłodniczego FC-72 przepływającego przez wymiennik ciepła z minikanałem prostokątnym o powierzchni rozwiniętej. Akwizycję temperatury na zewnętrznej powierzchni grzejnej umożliwiło zastosowanie kamery termowizyjnej. W pracy zaproponowano dwuwymiarowy matematyczny model opisujący zagadnienie odwrotne wymiany ciepła w module pomiarowym. W oparciu o wyniki eksperymentu wyznaczono rozkłady temperatury powierzchni grzejnej oraz czynnika chłodniczego, co w dalszej kolejności umożliwiło wyznaczenie lokalnych współczynników przejmowania ciepła na styku płyty grzejnej i płynu FC-72. Lokalne współczynniki przejmowania ciepła wyznaczono również z metody jednowymiarowej. Obliczenia numeryczne wykonane metodą Trefftza zweryfikowano z wynikami otrzymanymi w programie ADINA oraz z wynikami z metody jednowymiarowej.
The present paper focuses on flow boiling heat transfer with FC-72 in a heat exchanger containing a rectangular minichannel with structured surfaces. An infrared camera recorded temperatures at the external heated surface. The results of the experiments were used to model heat transfer in the minichannel by Trefftz functions and with the aid of the ADINA program. The heat transfer mathematical model was proposed. The model described the inverse heat transfer problems in the measurement module and allowed determining local heat transfer coefficients at the interface between the heated plate and FC-72 in the minichannel. Numerical calculations performed with the Trefftz functions were verified with the results obtained both from the ADINA program and from one dimensional method.
Źródło:
TTS Technika Transportu Szynowego; 2016, 12; 186-190
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Applying the topological derivative and the boundary element method to design of shape of the heat exchanger
Autorzy:
Freus, K.
Freus, S.
Powiązania:
https://bibliotekanauki.pl/articles/122334.pdf
Data publikacji:
2015
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
topological derivative
topological sensitivity
Laplace equation
boundary element method
heat transfer
Opis:
In this work, the topological derivative for the Laplace equation is used to solve a design problem. This derivative describes the sensitivity of the problem when a small hole is formed at an arbitrary point of the domain. The goal of this work is to design topology of the domain when the Robin condition is imposed on the holes. Physically, the holes can be construed as cooling channels. For finding the solution of the governing equation the boundary element method is applied. The final part of the paper presents the design of the heat exchanger and results of computations.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2015, 14, 2; 5-12
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the Alternating Direction Implicit Method for numerical solution of the dual phase lag equation
Autorzy:
Ciesielski, M.
Powiązania:
https://bibliotekanauki.pl/articles/281757.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
micro-scale heat transfer
dual phase lag model
control volume method
alternating direction implicit method
numerical simulation
Opis:
The problem discussed in the paper concerns the numerical modeling of thermal processes proceeding in micro-scale described using the Dual Phase Lag Model (DPLM) in which the relaxation and thermalization time appear. The cylindrical domain of a thin metal film subjected to a strong laser pulse beam is considered. The laser action is taken into account by the introduction of an internal heat source in the energy equation. At the stage of numerical modeling, the Control Volume Method is used and adapted to resolve the hyperbolic partial differential equation. In particular, the Alternating Direction Implicit (ADI) method for DPLM is presented and discussed. The examples of computations are also presented.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 3; 839-852
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical approaches to the heat transfer problem in modern electronic structures
Autorzy:
Raszkowski, T.
Samson, A.
Powiązania:
https://bibliotekanauki.pl/articles/952934.pdf
Data publikacji:
2017
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
nanoscale heat transfer
Fourier-Kirchhoff equation
dual-phase-lag equation
finite difference method
Runge-Kutta method
gear’s method
thermal analyses
Opis:
The main aim of this paper is to present a detailed description of the research related to the modeling of heat conduction in modern electronic structures, including special consideration for numerical aspects of analyzed algorithms. The motivation to undertake the research as well as some of the most-important results of the experiments and simulations are also included. Moreover, a numerical approximation of the problem as well as the methodology used and a sample solution of the mentioned problem are presented. In the main part, the discretization techniques, Ordinary Differential Equation algorithms, and simulation results for Runge-Kutta’s and Gear’s algorithms are analyzed and discussed. Additionally, a new effective approach to the modeling of heat transfer in electronic nanostructures is demonstrated.
Źródło:
Computer Science; 2017, 18 (1); 71-93
1508-2806
2300-7036
Pojawia się w:
Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Opracowanie i konstrukcja regulatora pompy ciepła typu powietrze-woda: modelowanie obiektu
Design and construction of the controller for air-water heat pump: modeling of control plant
Autorzy:
Tatjewski, P.
Ławryńczuk, M.
Marusak, P.
Rubik, M.
Ziętek, P.
Szumski, M.
Powiązania:
https://bibliotekanauki.pl/articles/930313.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
pompa ciepła
modelowanie
metoda iteracji prostych
heat pump
modeling
direct iteration method
Opis:
W artykule opisano metodę tworzenia modelu pompy ciepła, który docelowo zostanie wykorzystany do opracowania urządzenia sterującego. Ze względu na szybkie działanie obiektu, skoncentrowano się na opracowaniu modelu statycznego obiektu. Model ten jest złożony z szeregu równań, które opisują poszczególne elementy pompy ciepła, czyli: sprężarkę, skraplacz, zawór rozprężny oraz parowacz. Pomimo stosunkowo bogatej literatury, w której zostały opisane modele poszczególnych elementów pompy ciepła, ich połączenie w jeden model nie jest niestety działaniem prostym i, ze względu na stosunkowo duży stopień skomplikowania zagadnienia, wymaga opracowania funkcji (najczęściej w postaci wielomianów), które opisują zmiany parametrów modelu. Ponadto okazało się być potrzebne zastosowanie algorytmu otrzymywania wartości wyjść, który bazuje na metodzie iteracji prostych. Dzięki opisanemu w referacie podejściu, została uzyskana dobra jakość modelowania, o czym świadczą wyniki przeprowadzonych eksperymentów. Podczas tych badań, przebiegi zmiennych odwzorowujących pracę obiektu zostały porównane z danymi pozyskanymi z rzeczywistego obiektu (pompy ciepła).
A method of design of a heat pump model for developing optimizing control device is described. The control plant is fast, therefore a static control plant model is considered. The model consists of many equations describing elements of the heat pump, namely: a compressor, a condenser, an expansion valve and an evaporator. Despite relatively rich literature describing models of the elements of the heat pump, connection of these models into one is not a simple task. Due to the complexity of the problem some functions describing changes of parameters of the control plant must be obtained (in most cases polynomials are used as these functions). Moreover, as the complexity of the model is considerable an algorithm based on direct iteration method must be used to obtain output values. Thanks to the approach which was described in the paper, good quality of modeling was obtained, what is well illustrated by results of comparison of variables obtained from the model with data collected from the real plant.
Źródło:
Pomiary Automatyka Robotyka; 2015, 19, 1; 21-28
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the method of fundamental solutions with the Laplace transformation for the inverse transient heat source problem
Zastosowanie metody rozwiązań podstawowych i transformacji Laplace’a do odwrotnego niestacjonarnego problemu źródeł ciepła
Autorzy:
Mierzwiczak, M.
Kołodziej, J. A.
Powiązania:
https://bibliotekanauki.pl/articles/281670.pdf
Data publikacji:
2012
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
method of fundamental solutions
radial basis functions
inverse transient heat source problem
Opis:
The paper deals with the inverse determination of heat source in an unsteady heat conduction problem. The governing equation for the unsteady Fourier heat conduction in 2D region with unknown internal heat source is known as the inverse boundary-initial-value problem. The identification of strength of the heat source is achieved by using the boundary condition, initial condition and a known value of temperature in chosen points placed inside the domain. For the solution of the inverse problem of determination of the heat source, the Laplace transformation with the method of fundamental solution and radial basis functions is proposed. Due to ill conditioning of the inverse transient heat conduction problem, the Tikhonov regularization method based on SVD and L-curve criterion was used. As the test problems, the 2D inverse boundary-initial-value problems (2D IBIVP) in region with known analytical solutions are considered.
Artykuł dotyczy odwrotnego problemu określenia mocy źródeł ciepła dla nieustalonego zagadnienia przewodzenia ciepła. Równanie różniczkowe nieustalonego przewodzenia ciepła Fouriera w obszarze dwuwymiarowym z nieznanymi wewnętrznymi źródłami ciepła jest znane jako odwrotny problem brzegowo-początkowy. Przy określeniu mocy źródeł ciepła korzysta się z warunku brzegowego, warunku początkowego oraz znanej wartości temperatury w wybranych punktach rozmieszczonych wewnątrz rozważanego obszaru. Do rozwiązania odwrotnego problemu źródeł ciepła została zaproponowana transformacja Laplace’a połączona z metodą rozwiązań podstawowych i promieniowymi funkcjami bazowymi. Ze względu na złe uwarunkowanie problemu, w pracy zastosowano metodę regularyzacji Tichonowa dla rozkładu SVD oraz kryterium L-krzywej. Jako przykłady testowe rozważono dwuwymiarowe odwrotne problemy brzegowo-początkowe (2D IBIVP) ze znanym rozwiązaniem analitycznymi.
Źródło:
Journal of Theoretical and Applied Mechanics; 2012, 50, 4; 1011-1023
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An inverse backward problem for degenerate two-dimensional parabolic equation
Autorzy:
Atifi, Khalid
Essoufi, El-Hassan
Khouiti, Bouchra
Powiązania:
https://bibliotekanauki.pl/articles/255085.pdf
Data publikacji:
2020
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
data assimilation
adjoint method
regularization
heat equation
inverse problem
degenerate equations
optimization
Opis:
This paper deals with the determination of an initial condition in the degenerate two-dimensional parabolic equation [formula], where Ω is an open, bounded subset of R2, a [formula] with a ≥0 everywhere, and [formula], with initial and boundary conditions [formula] from final observations. This inverse problem is formulated as a minimization problem using the output least squares approach with the Tikhonov regularization. To show the convergence of the descent method, we prove the Lipschitz continuity of the gradient of the Tikhonov functional. Also we present some numerical experiments to show the performance and stability of the proposed approach.
Źródło:
Opuscula Mathematica; 2020, 40, 4; 427-449
1232-9274
2300-6919
Pojawia się w:
Opuscula Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heat transfer and pressure drop characteristics of the silicone-based plate heat exchanger
Autorzy:
Muszyński, Tomasz
Andrzejczyk, Rafał
Park, Il Wong
Dorao, Carlos Alberto
Powiązania:
https://bibliotekanauki.pl/articles/240347.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat transfer coefficient
heat exchangers
enhanced surface
Wilson plot method
współczynnik wnikania ciepła
wymienniki ciepła
czynnik chłodniczy
metoda Wilsona
Opis:
The paper presents an experimental investigation of a silicone based heat exchanger, with passive heat transfer intensification by means of surface enhancement. The main objective of this paper was to experimentally investigate the performance of a heat exchanger module with the enhanced surface. Heat transfer in the test section has been examined and described with precise measurements of thermal and flow conditions. Reported tests were conducted under steady-state conditions for single-phase liquid cooling. Proposed surface modification increases heat flux by over 60%. Gathered data presented, along with analytical solutions and numerical simulation allow the rational design of heat transfer devices.
Źródło:
Archives of Thermodynamics; 2019, 40, 1; 127-143
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bioheat transfer equation : the problem of FDM explicit scheme stability
Autorzy:
Tuzikiewicz, W.
Duda, M.
Powiązania:
https://bibliotekanauki.pl/articles/122648.pdf
Data publikacji:
2015
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
bio-heat transfer
finite difference method
stability condition
von Neumann method
wymiana biociepła
metoda różnic skończonych
stan stateczności
Opis:
In the paper the problem of explicit FDM scheme stability for the bio-heat transfer equation (the Pennes equation) is discussed. To formulate the appropriate condition the von Neumann approach is applied. The first chapter contains the known derivation of FDM stability condition for the Fourier equation. In the second part, a similar condition is found for the case of the bio-heat transfer equation containing both the perfusion and metabolic heat sources.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2015, 14, 4; 139-144
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Distribution of heat exchange coefficient and vertical two-phase cross-flow structures examination over tube bundles, using DPIV and electrochemical methods
Badanie nierównomierności rozkładu współczynnika wnikania ciepła na powierzchni rur oraz niejednorodności struktur wokół rur, przy przepływie mieszaniny dwufazowej z wykorzystaniem metody elektrochemicznej i DPIV
Autorzy:
Karaś, M
Zając, D.
Ulbrich, R.
Powiązania:
https://bibliotekanauki.pl/articles/2073407.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
wymiana ciepła
DPIV
elektrochemiczna
przepływ dwufazowy
heat exchange
electrochemical method
two-phase flow
Opis:
Przeprowadzono badania nad przepływem dwufazowym wznoszącym przez przestawny i równoległy pęk rur. Za pomocą cyfrowej anemometrii obrazowej DPIV dokonano wizualizacji przepływu. Do określenia nierównomierności wymiany ciepła na powierzchni rurek wykorzystano elektrochemiczną metodę opartą na analogii wymiany ciepła i masy. Wyniki otrzymane dwiema metodami zestawiono badając wpływ rozkładu pola prędkości wokół rur na intensywność wymiany ciepła na jej powierzchni.
Two-phase vertical flow over a tube bundle was examined. To calculate the heat transfer coefficient on tubes' surface, the electrochemical technique based on heat and mass transfer analogy was used. The Digital Particle Image Velocimetry (DPIV) technique was applied to create velocity fields around tubes. The results obtained using both methods were compared in order to get an overview of velocity distribution around the tube and its influence on heat transfer intensity on its surface.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 5; 431--432
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ciepło spalania słomy jęczmienia uprawianego w warunkach zmiennego poziomu nawożenia potasowego
Heat of combustion of barley straw cultivated in conditions of a variable level of potassium fertilization
Autorzy:
Żabiński, A.
Sadowska, U.
Powiązania:
https://bibliotekanauki.pl/articles/286353.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
słoma jęczmienna
ciepło spalania
metoda kalorymetryczna
barley straw
heat of combustion
calorimeter method
Opis:
Celem podjętych badań było określenie i porównanie wartości ciepła spalania słomy jęczmienia z uprawy przy dwóch poziomach nawożenia potasowego. Badania wykonano za pomocą kalorymetru zgodnie z obowiązującą normą PN-EN ISO 9831:2005. Na podstawie otrzymanych wyników stwierdzono, że na wartość ciepła spalania badanej słomy jęczmiennej wpływ miała zarówno jej wilgotność, jak też zastosowana podczas uprawy dawka potasu. Przy wilgotności 3,2 i 11,7% słoma jęczmienia nawożonego potasem w dawce 150 kg·ha-1 charakteryzowała się wyższą, w stosunku do drugiego zastosowanego wariantu nawożenia tym składnikiem, wartością ciepła spalania, wynoszącą odpowiednio 18,98 i 18,02 MJ·kg-1. W przypadku jęczmienia, który nawożono o połowę mniejszą dawką potasu, ciepło spalania jego słomy przy wilgotności 3,2% wynosiło 18,3 MJ·kg-1, natomiast 17,51 MJ·kg-1, gdy słoma miała wilgotność 11,7%.
The objective of the research was to determine and compare values of the heat of combustion of barley straw from cultivation at two levels of potassium fertilization. The research were conducted using a calorimeter pursuant to the applicable standard PN-EN ISO 9831:2005. Based on the obtained results it was determined that moisture of barley straw and a dose of potassium used at the cultivation influenced the value of the heat of combustion of barley straw. At the moisture of 3.2 and 11.7% straw of barley which was fertilized with potassium with the dose of 150 kg·ha-1 was characterized by a higher value of the heat of combustion, in comparison to the the second variant of fertilization with this component, which amounted to respectively 18.98 and 18.02 MJ·kg-1. In case of barley, which was fertilized with a half lower dose of potassium, the heat of combustion of its straw, at the moisture of 3.2% was 18.3 MJ·kg-1 and 17.51MJ·kg-1 when the straw was of 11.7% moisture.
Źródło:
Inżynieria Rolnicza; 2013, R. 17, nr 3, t. 1, 3, t. 1; 387-392
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A numerical examination of an unsteady nonlinear MHD flow in the presence of thermal radiation and heat generation
Autorzy:
Agbaje, T. M.
Leach, P. G. L.
Powiązania:
https://bibliotekanauki.pl/articles/1839890.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
przepływ MHD
promieniowanie cieplne
wytwarzanie ciepła
unsteady MHD flow
spectral perturbation method
spectral relaxation method
thermal radiation
heat generation
Opis:
In this study, the spectral perturbation method and the spectral relaxation method are used to solve the nonlinear differential equations of an unsteady nonlinear MHD flow in the presence of thermal radiation and heat generation. The SPM is mainly based on series expansion, generating series approximation coupled with the Chebyshev spectral method. The numerical results generated using the spectral perturbation method were compared with those found in the literature, and the two results were in good agreement.
Źródło:
International Journal of Applied Mechanics and Engineering; 2021, 26, 1; 1-17
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Algorithm of rebuilding a boundary of domain during creation of an optimal shape
Autorzy:
Freus, K.
Freus, S.
Powiązania:
https://bibliotekanauki.pl/articles/122780.pdf
Data publikacji:
2016
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
Laplace equation
boundary element method
heat transfer
topological-shape sensitivity method
równanie Laplace'a
metoda elementów brzegowych
wymiana ciepła
Opis:
In order to achieve the desired topology we often have to remove material of the area considered. This work presents the author's algorithm which can be used in the reconstruction of the boundary of domain after elimination of a certain amount of material. The paper introduces some details about the procedure that allows one to achieve the expected shape of a domain. The topological-shape sensitivity method for the Laplace equation is used to obtain an optimal topology, whereas numerical methodology utilizes the boundary element method. In the conclusion of the paper the example of computation is shown.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2016, 15, 1; 17-24
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Implicit scheme of the finite difference method for the second-order dual phase lag equation
Autorzy:
Majchrzak, E.
Mochnacki, B.
Powiązania:
https://bibliotekanauki.pl/articles/280549.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
microscale heat transfer
dual phase lag model
implicit scheme of finite difference method
Opis:
The second-order dual phase lag equation (DPLE) as a mathematical model of the microscale heat transfer is considered. It is known that the starting point determining the final form of this equation is the generalized Fourier law in which two positive constants (the relaxation and thermalization times) appear. Depending on the order of the generalized Fourier law expansion into the Taylor series, different forms of the DPLE can be obtained. As an example of the problem described by the second-order DPLE equation, thermal processes proceeding in the domain of a thin metal film subjected to a laser pulse are considered. The numerical algorithm is based on an implicit scheme of the finite difference method. At the stage of numerical modeling, the first, second and mixed order of the dual phase lag equation are considered. In the final part of the paper, examples of different solutions are presented and conclusions are formulated.
Źródło:
Journal of Theoretical and Applied Mechanics; 2018, 56, 2; 393-402
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ciepło spalania ziarniaków zbóż z podrodziny wiechlinowatych
Heat of combustion of wheat grains from a gramineae subgroup
Autorzy:
Żabiński, A.
Sadowska, U.
Wcisło, G.
Powiązania:
https://bibliotekanauki.pl/articles/292056.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
ziarniak
zboże
ciepło spalania
metoda kalorymetryczna
wheat grain
heat of combustion
calorimeter method
Opis:
Celem podjętych badań było określenie i porównanie wartości ciepła spalania ziarniaków zbóż przy różnym stopniu ich uwilgotnienia (11, 16, 18%). Badania wykonano za pomocą kalorymetru zgodnie z obowiązującą normą PN-EN ISO 9831:2005. Na podstawie otrzymanych wyników stwierdzono m.in. że największymi średnimi wartościami ciepła spalania przy wilgotności 11 i 18% charakteryzują się ziarniaki owsa i jęczmienia.
The purpose of the research was to determine and compare the value of the heat of combustion of wheat grains with a different degree of humidity (11, 16, 18%). The researches were conducted using the calorimeter pursuant to the applicable standard PN-EN ISO 9831:2005. On the basis of the obtained results it was stated, among others, that oat and barley grains are characterised by the highest values of the heat of combustion with the humidity of 11 and 18%.
Źródło:
Inżynieria Rolnicza; 2011, R. 15, nr 5, 5; 307-312
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of heat treatment of steel elements with the movement of coolant
Modelowanie obróbki cieplnej elementów stalowych z uwzględnieniem ruchów chłodziwa
Autorzy:
Kulawik, A.
Bokota, A.
Powiązania:
https://bibliotekanauki.pl/articles/351051.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
obróbka cieplna
chłodzenie
płyn chłodzący
heat treatment
continuous cooling
meshless method
liquid coolant
Opis:
A mathematical and numerical model of hardening process using the generalized finite difference method for the movement of fluid and heat transport have been proposed in this paper. To solve the Navier-Stokes equation the characteristic based split scheme (CBS) has been used. The solution of the heat transport equation with the convective term has been obtained by a stabilized meshless method. To determine of the phase transformation the macroscopic model built on the basis of CCT diagrams for continuous cooling of medium-carbon steel has been used. The temporary temperature fields, the phase transformation, thermal and structural strains for the heat treated element and the fields of temperature and velocity for the coolant have been determined. The comparative analysis of the results of calculations for the model without taking into account movement of coolant has been carried out. The effect of the notch in the shaft on the cooling rates and fields of the kinetics of the phase transformations has been presented.
W pracy zaproponowano model matematyczny i numeryczny zjawisk termicznych oraz ruchów chłodziwa zbudowany z wykorzystaniem uogólnionej metody różnic skończonych. Do rozwiązania równania Naviera-Stokesa wykorzystano metodę rzutowania (CBS). Rozwiązanie równania przewodzenia ciepła z członem konwekcyjnym uzyskano na podstawie stabilizowanej bezsiatkowej metody różnic skończonych. Do modelowania przemian fazowych wykorzystano makroskopowy model zbudowany na podstawie analizy wykresów ciągłego chłodzenia CTPc dla stali średniowęglowej. Dla elementu obrabianego cieplnie określono chwilowe pola temperatury, udziały fazowe, odkształcenia termiczne, strukturalne oraz pala temperatury i prędkości cieczy chłodzącej. Przeprowadzono analizę porównawczą z wynikami obliczeń z ruchem i bez ruchu chłodziwa. W pracy przedstawiono także wpływ wycięcia (rowka na wałku) na pola prędkości chłodziwa oraz na kinetykę przemian fazowych.
Źródło:
Archives of Metallurgy and Materials; 2011, 56, 2; 345-357
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energy efficiency analysis of railway turnout heating system with a melting snow model heated by classic and contactless heating method
Autorzy:
Flis, Mateusz
Powiązania:
https://bibliotekanauki.pl/articles/140565.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electrical heating
enthalpy method
experimental research
melting process
railway turnouts
thermal field
heat distribution
Opis:
Maintaining railway turnout operability is crucial for ensuring railway transport safety. Electric heating of railway turnouts is a significant technical and economic issue. The classical heating is characterised by high power consumption. For this reason, research is needed to optimise the current system. This paper presents results of a numerical analysis and of experimental researches. The numerical analysis was carried out using the ANSYS software. There was conducted a numerical comparative analysis of energy loss during heating performed using two different heaters. Including the classical method and a heater thermally insulated from a rail. In the first step, heating of a working space filled with a substitute snow model was considered. The snow-covered surface area was held within the working space of the turnout. It was assumed that the snow substitute material had thermal properties approximately the same as real light snow. It was also assumed that the material is in the solid state which would not undergo a phase change. In the next step, a real snow model that included the phase change process was taken into account. The energy efficiency and heat distribution in the turnout have been analysed and compared. The experimental researches were carried out in a physical model. The results showed that the use of a contactless heater results in creating a larger area over which emitted heat affected snow in the working space. Consequently, more snow was melted around the contactless heater than the classic one. This experimental observation supported the results of the numerical analyses presented previously.
Źródło:
Archives of Electrical Engineering; 2019, 68, 3; 511-520
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of Internal Heat Generation on the Thermal Stability of a Porous Fin
Autorzy:
Sobamowo, M. G.
Jayesimi, L. O.
Waheed, M. A.
Powiązania:
https://bibliotekanauki.pl/articles/1031875.pdf
Data publikacji:
2020
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Differential Transformation Method
Porous Fin
Temperature-Dependent Internal Heat Generation
Thermal analysis
Thermal performance
Opis:
In this study, the effects of internal heat generation on thermal stability of porous fin is theoretical investigated using differential transform method. The parametric studies reveal increase in the internal heat generation leads to increase in the value or the range of the thermal stability of the fin. The internal heat generation can be used to control the thermal instability in the fin. Also, as the porosity parameter increase, the rate of heat transfer from the base of the fin and consequently improve the efficiency of the fin increase. However, a high value or an excessive internal heat generation results in an undesirable situation where some of the heat energy cannot escape to the sink and instead ends up flowing into the prime surface and the fin tends to store heat rather than dissipating it. This scenario defeats the prime purpose of the cooling fin. Therefore, the operational parameters must be carefully selected to ensure that the fin retains its primary purpose of removing heat from the primary surface.
Źródło:
World Scientific News; 2020, 149; 110-127
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of thermal and mechanical stresses of Renault Premium DXi11 460 EEV four-stroke piston
Autorzy:
Kaliszewski, M.
Mazuro, P.
Powiązania:
https://bibliotekanauki.pl/articles/245402.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
heat transfer
temperature distribution
four-stroke engine piston
finite element method
1D combustion
Opis:
In this article the engine piston Renault Premium DXi11 430 460 EEV has been analysed using the Finite Element Method. Analysis consider as well heat transfer phenomenon as the thermal and mechanical strains of the piston. Simulations were performed for the point of engine maximum power. Piston material was assumed to be 40HM (1.7225) steel and its properties are delivered basing on available scientific papers. The simulation assumed mean values of heat transfer coefficient, reference temperature and cycle pressure based on engine data, maximum power engine work simulation in AVL Boost software and literature. Part of boundary condition (e.g. cylinder wall temperature) was assumed basing on authors’ engineering intuition and experience. The resulting temperature distribution in the piston was implemented for geometrically nonlinear mechanical FEM analysis. Both the analysis of thermal stresses and stresses of the hot piston in the top dead centre were performed.
Źródło:
Journal of KONES; 2018, 25, 2; 169-175
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of nanofluid concentration on two-phase thermosyphon heat exchanger performance
Autorzy:
Cieśliński, J. T.
Powiązania:
https://bibliotekanauki.pl/articles/240904.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
two-phase thermosyphon
heat exchanger
nanofluid
Wilson method
termosyfon dwufazowy
wymiennik ciepła
metoda Wilsona
Opis:
An approach – relaying on application of nanofluid as a working fluid, to improve performance of the two-phase thermosyphon heat exchanger (TPTHEx) has been proposed. The prototype heat exchanger consists of two horizontal cylindrical vessels connected by two risers and a downcomer. Tube bundles placed in the lower and upper cylinders work as an evaporator and a condenser, respectively. Distilled water and nanofluid water-Al2O3 solution were used as working fluids. Nanoparticles were tested at the concentration of 0.01% and 0.1% by weight. A modified Peclet equation and Wilson method were used to estimate the overall heat transfer coefficient of the tested TPTHEx. The obtained results indicate better performance of the TPTHEx with nanofluids as working fluid compared to distilled water, independent of nanoparticle concentration tested. However, increase in nanoparticle concentration results in overall heat transfer coefficient decrease of the TPTHEx examined. It has been observed that, independent of nanoparticle concentration tested, decrease in operating pressure results in evaporation heat transfer coefficient increase.
Źródło:
Archives of Thermodynamics; 2016, 37, 2; 23-40
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A concrete heat accumulator for use in solar heating systems - a mathematical model and experimental verification
Autorzy:
Sacharczuk, J.
Taler, D.
Powiązania:
https://bibliotekanauki.pl/articles/240260.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat storage
solar heating system
control volume finite element method
akumulowanie ciepła
kolektor słoneczny
Opis:
The article presents a numerical model of the concrete heat accumulator for solar heating systems. Model uses control volume finite element method with an explicit solution method for time integration. The use of an explicit method is an essential advantage in the simulation of time-dependent changes in temperature of the air at the accumulator inlet. The study compares the results of numerical model calculations of the accumulator heating with experimental measurements and with computational fluid dynamics modeling. The comparison shows a good correlation between the results of calculation using the model and the results of measurements.
Źródło:
Archives of Thermodynamics; 2014, 35, 3; 281-295
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The analysis of gradient algorithm effectiveness - two dimensional heat transfer problem
Autorzy:
Łopata, S.
Ocłoń, P.
Powiązania:
https://bibliotekanauki.pl/articles/240515.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
algorytm gradientów
metoda regulacji głośności
wymiana ciepła
control volume method
gradient algorithms
heat transfer
Opis:
The analysis of effectiveness of the gradient algorithm for the two-dimension steady state heat transfer problems is being performed. The three gradient algorithms - the BCG (biconjugate gradient algorithm), the BICGSTAB (biconjugate gradient stabilized algorithm), and the CGS (conjugate gradient squared algorithm) are implemented in a computer code. Because the first type boundary conditions are imposed, it is possible to compare the results with the analytical solution. Computations are carried out for different numerical grid densities. Therefore it is possible to investigate how the grid density influences the efficiency of the gradient algorithms. The total computational time, residual drop and the iteration time for the gradient algorithms are additionally compared with the performance of the SOR (successive over-relaxation) method.
Źródło:
Archives of Thermodynamics; 2010, 31, 4; 37-50
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rozwiązanie zagadnienia przewodzenia ciepła w obszarach wielospójnych metodą elementów brzegowych
Solution of the heat conduction problem in connected multidomain by boundary element method
Autorzy:
Werner-Juszczuk, A J
Sorko, S A
Powiązania:
https://bibliotekanauki.pl/articles/404196.pdf
Data publikacji:
2012
Wydawca:
Polskie Towarzystwo Symulacji Komputerowej
Tematy:
obszar wielospójny
przewodzenie ciepła
metoda elementów brzegowych
connected multidomain
heat conduction
boundary element method
Opis:
W opracowaniu przedstawiono rozwiązanie zagadnienia ustalonego przewodzenia ciepła w układach obszarów płaskich o różnych własnościach materiałowych, metodą elementów brzegowych. Dokonano porównania wyników rozwiązania zagadnienia przewodzenia ciepła w przegrodzie płaskiej oraz ściance cylindrycznej przy pomocy MEB oraz metody analitycznej. Uzyskano wysoki stopień zgodności wyników, co potwierdza skuteczność metody elementów brzegowych w rozwiązywaniu zagadnień wymiany ciepła w obszarach wielospójnych.
In the paper, the solution of steady heat conduction problem in the system of flat domains of various material properties, by boundary element method, is presented. One made the comparison between the results of solving the heat conduction problem with BEM and with analytical method. The results achieved by both methods are in a good agreement, what confirms the efficacy of boundary element method in solving the heat transfer problems in connected multidomain.
Źródło:
Symulacja w Badaniach i Rozwoju; 2012, 3, 1; 57-68
2081-6154
Pojawia się w:
Symulacja w Badaniach i Rozwoju
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania nad doborem parametrów obróbki cieplnej warstw powierzchniowych odlewniczych stopów aluminium odkształconych metodą PWPP
Research on the Selection of Parameters of Heat Treatment of the Surface Layers of Aluminum Cast Alloys Deformed by PWPP Method
Autorzy:
Knych, T.
Uliasz, P.
Wiecheć, J.
Powiązania:
https://bibliotekanauki.pl/articles/381279.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
odlewniczy stop aluminium
obróbka cieplna
metoda PWPP
aluminium casting alloy
heat treatment
PWPP method
Opis:
Stopy typu Al-Si-Mg o zawartości krzemu w przedziale 4 do 24 % mas. (siluminy) należą do jednych z najbardziej rozpowszechnionych tworzyw wykorzystywanych w odlewnictwie metali nieżelaznych. Ich wielka popularność spowodowana jest zestawem własności w postaci między innymi niskiej gęstości czy wysokich własności mechanicznych oraz własności odlewniczych. Z drugiej jednak strony charakterystyka procesu technologicznego wykorzystującego tę grupę materiałów sprzyja pojawianiu się w nich porowatości i rzadzizn, które mogą stać się źródłem pęknięć. Metodą umożliwiającą eliminację negatywnych skutków tej grupy defektów jest Powierzchniowa Wysokotemperaturowa Przeróbka Plastyczna (PWPP). Modyfikacja warstwy wierzchniej odlewu za pomocą tego typu obróbki jest szczególnie pożądana w elementach konstrukcyjnych dla przemysłu transportowego, elektromaszynowego czy w budownictwie. Zastosowania te wymagają od odlewów spójnej, pozbawionej nieciągłości struktury warstwy wierzchniej oraz zwiększonych własności mechanicznych. Jednym ze sposobów polepszenia tych drugich jest obróbka cieplna, polegająca na przesycaniu i sztucznym starzeniu. W pracy przedstawiono badania nad doborem optymalnych parametrów obróbki cieplnej w postaci czasu i temperatury starzenia sztucznego dla stopu AlSi7Mg0,3 po procesie PWPP.
Al-Si-Mg cast alloys with a silicon content in the range of 4 to 24 % by weight (silumins) are among the most common materials used in the casting of non-ferrous metals. Their popularity is due to a large set of properties, inter alia, low density or high mechanical properties and casting properties. On the other hand, that uses characteristics of the technological process of this group of materials in the emergence of their porosity and microshrinkage which can be a source of cracks. The method allows the elimination of the negative effects of this group of defects is Surface High-Temperature Plastic Processing (PWPP method). Modification of the surface layer of the cast with this type of treatment is particularly desirable for the structural components of the transport industry, electrical engineering or in the building industry. These applications require a coherent castings, devoid of discontinuity of the surface layer of the structure and increased mechanical properties. One way to improve on the second properties is heat treatment, which consists of oversaturation and artificial aging. The paper presents research on the selection of optimal parameters of heat treatment time and temperature for the AlSi7Mg0,3 alloy after PWPP method.
Źródło:
Archives of Foundry Engineering; 2013, 13, 3 spec.; 69-74
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efektywność energetyczna okien jako funkcja ich orientacji przestrzennej
Windows’ energetic efficiency as a function of their spatial orientation
Autorzy:
Rzeźnik, I.
Rzeźnik, W.
Powiązania:
https://bibliotekanauki.pl/articles/335401.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
budynki
okna
zużycie energii cieplnej
optymalizacja
metoda
buildings
windows
heat energy consumption
optimization
method
Opis:
Przedstawiono oryginalną metodę optymalizacji orientacji przestrzennej budynków wyposażonych w okna. Kryterium optymalizacji była minimalizacja rocznego zużycia energii cieplnej dla rocznej eksploatacji budynku. Korzystając z metody i odpowiedniej bazy danych wykonano przykładowe obliczenia optymalizacyjne dla budynku mieszkalnego.
In this paper the original optimization method of windows orientation is present. Minimization of yearly heat energy consumption in the building was the optimization criterion. Using this method and appropriate data base the exemplary optimization calculations for dwelling house were made.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2013, 58, 2; 145-148
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of influence of temperature on wellbore tubing dimensions
Autorzy:
Kwietniewski, M.
Miedzińska, D.
Niezgoda, T.
Małek, E.
Powiązania:
https://bibliotekanauki.pl/articles/241587.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
wellbore
tubing
heat
thermal extension
pipe
steel P110
thermal analyses
finite element method
Opis:
The construction of exploitation wellbore is complex, it consists of several columns of pipelines which perform different tasks. It is very important to preclude flow of reservoir fluid between wellbore and ground. Tubing is a kind of a pipeline which is very important element of oil and gas wellbore construction. It allows to transport fracturing medium between wellbore station and underground deposit. Manufacture quality and correct mounting of tubing in the wellbore are the key for effective exploitation. However, during work those pipes are subjected to changeable loads which results in temperature value changes for example. That temperature variations can be caused by cold medium transport inside the pipe. In the paper, analyses of influence of temperature value changes on the tubing shrinkage were presented. Numerical analyses of section of pipe vertically located in the wellbore and loaded with changeable temperature were carried out. The calculations were made with the use of coupled structural and thermal analyses. Received results of tubing shrinkage for fragment of pipe were adapted to the column of pipes of 3000 m length. Results of numerical analyses were verified with the analytical calculations. Material of tubing was assumed as steel P110 which is often applied in the wellbore construction.
Źródło:
Journal of KONES; 2016, 23, 4; 269-273
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical and thermal stresses issues related to a size of a four-stroke piston based on a Renault Premium DXi11 430 460 EEV engine
Autorzy:
Kaliszewski, M.
Mazuro, P.
Powiązania:
https://bibliotekanauki.pl/articles/242061.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
heat transfer
temperature distribution
four-stroke engine piston
finite element method
size related issues
Opis:
The size of an engine is one of the factors affecting its thermal efficiency. It is known that with an increase of the size of the engine, the cubic capacity and heat generation grows in the third power, whereas thermal losses are proportional only to the second power of the size (due to heat exchange surface). However, the increase in the size of the engine generates some problems related to its mass, rotational speed and heat load, the last of which is a subject of these considerations. In the article, the influence of the piston size on its thermal and mechanical stresses is considered. Similar boundary conditions for both cases were assumed. Simulation of the steady-state heat transfer and mechanical simulation were carried out using the Finite Element Method. In each analysis, both the original version of the piston and its scaled version were considered. The boundary conditions were adopted on the basis of engine catalogue data and available literature. The results of analyses were discussed.
Źródło:
Journal of KONES; 2018, 25, 3; 275-282
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania przenoszenia pędu i ciepła przy opływie rur w wymienniku ciepła
Research of heat and momentum transfer during flow over a tube bundle in the heat exchanger
Autorzy:
Karaś, M.
Ulbrich, R.
Zając, D.
Powiązania:
https://bibliotekanauki.pl/articles/2071901.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
przepływ dwufazowy
wnikanie ciepła
metody elektrochemiczne
DPIV
two-phase flow
heat transfer
electrochemical method
Opis:
W pracy przedstawiono wyniki badań przepływu dwufazowego wokół pęku rur. Analizie poddano przestawne i równoległe układy rur w pęku o podział- ce równej 1,66. Wyznaczono pola prędkości oraz rozkład współczynnika wnikania ciepła wokół rur przy pomocy technik DPIV i elektrochemicznej. Wyniki zaprezentowano dla różnych strumieni poszczególnych faz w postaci pól prędkości oraz lokalnych rozkładów liczby Nusselta wokół poszczególnych rur w pęku.
This paper presents results of recent studies in two-phase flow around a tube bundle in the model of shell-and-tube heat exchanger. Two types of models of the in-line and staggered arrays with pitch to diameter ratio equal to 1.66 were examined. Two measuring techniques (DPIV and electrochemical) were combined in order to obtain complex data containing fluid velocity fields around tubes and the heat transfer coefficient on tubes' surface. Keywords: two-phase flow, heat transfer, electrochemical method, DPIV
Źródło:
Inżynieria i Aparatura Chemiczna; 2012, 6; 328-329
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stabilność rozwiązania zagadnienia brzegowego niestacjonarnego profilu temperatury w przegrodzie budowlanej
Autorzy:
Owczarek, M.
Radzikowska-Juś, W.
Powiązania:
https://bibliotekanauki.pl/articles/111166.pdf
Data publikacji:
2018
Wydawca:
Centrum Rzeczoznawstwa Budowlanego Sp. z o.o.
Tematy:
przewodzenie ciepła
krok czasowy
metoda objętości skończonych
heat transfer
time step
finite volume method
Opis:
Jedną z uniwersalnych a zarazem prostych metod dla numerycznego rozwiązywania zadań nieustalonego przewodzenia ciepła w obudowie budynku jest metoda objętości skończonych. Jednak, przy sformułowaniu jawnym konieczne jest dobranie kroku czasowego, gwarantującego stabilność rozwiązania. W tym artykule wartość takiego kroku czasowego została określona z warunku zerowej różnicy pomiędzy teoretycznym a numerycznym rozwiązaniem dla danej geometrii ściany. Rozpatrzono wpływ współczynnika przewodzenia ciepła ściany na długość kroku. Warunki brzegowe przyjęte w artykule odpowiadały obciążeniom ogniowym ściany schronu.
One of the most simple and versatile method for numeric solving of the problems of transient heat conduction in the building envelope is the finite volume method. In explicit scheme however there is a problem of assuming correct time step for solution stability. In this article stable step value was determined from the condition of zero difference between the theoretical and numerical solution for the particular geometry of the wall. The influence of the thermal conductivity on the step length has been evaluated. Condition for the correctness of solutions obtained from the analysis in this article is sharper than the condition of equations stability according to the literature. For the boundary conditions adopted solution can be applied to the study of resistance of buildings shelters to long fire.
Źródło:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych; 2018, 3-4; 30-34
2450-1859
2450-8721
Pojawia się w:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Correlations for the thermal conductivity of selected steel grades as a function of temperature in the range of 0–800◦C
Autorzy:
Wyczółkowski, Rafał
Strychalska, Dominika
Bagdasaryan, Vazgen
Powiązania:
https://bibliotekanauki.pl/articles/2134935.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermal conductivity
heat transfer
least squares method
thermal conduction analysis
thermal treatment of steel
Opis:
Reliable knowledge of thermo-physical properties of materials is essential for the interpretation of solidification behaviour, forming, heat treatment and joining of metallic systems. It is also a precondition for precise simulation calculations of technological processes. Numerical calculations usually require the knowledge of temperature dependencies of three basic thermo-physical properties: thermal conductivity, heat capacity and density. The objective of this work is to find a correlation that fits the thermal conductivity of selected steel grades as a function of temperature (within the range of 0–800◦C) and carbon content (within the range of 0.1–0.6%). The starting point for the analysis are the experimental data on thermal conductivity taken from literature. Using the method of least squares it was possible to fit an equation which allows calculating the thermal conductivity of steel depending on the temperature and carbon content. Two kinds of equations have been analyzed: a linear one (a linear model) and a second degree polynomial (a non-linear model). The thermal conductivity obtained by linear and nonlinear models varies on average from the measured values by 3% and 2.6% respectively.
Źródło:
Archives of Thermodynamics; 2022, 43, 3; 29--45
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Integro-differential form of the first-order dual phase lag heat transfer equation and its numerical solution using the Control Volume Method
Autorzy:
Ciesielski, M.
Mochnacki, B.
Majchrzak, E.
Powiązania:
https://bibliotekanauki.pl/articles/38606551.pdf
Data publikacji:
2020
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
micro-scale heat transfer
dual phase lag model
integro-differential equation
Control Volume Method
Opis:
The start point of the dual phase lag equation (DPLE) formulation is the generalized Fourier law in which two positive constants (the relaxation and thermalization times) appear. This type of equation can be used (among others) to describe the heat conduction processes proceeding in micro-scale. Depending on the number of components in the development of the generalized Fourier law into a power series, one can obtain both the first-order DPLE and the second-order one. In this paper the first-order dual phase lag equation is considered. The primary objective of this research is the transformation of DPLE differential form to the integro-differential one supplemented by the appropriate boundary-initial conditions. The obtained form of the differential equation is much simpler and more convenient at the stage of numerical computations – the numerical algorithm based on the three-time-level scheme reduces to the two-time-level one. To find the numerical solution, the Control Volume Method is used (the heating of thin metal film subjected to a laser beam is considered). The choice of the numerical method was not accidental. The method has a simple physical interpretation ensuring the preservation of the local and global energy balances. To our knowledge, it has not been used so far in this type of tasks. In the final part of the paper the examples of numerical simulations are presented and the conclusions are formulated.
Źródło:
Archives of Mechanics; 2020, 72, 5; 415-444
0373-2029
Pojawia się w:
Archives of Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of particular parameters on the temperature distribution in the impletion of regenerative heat exchanger
Wpływ wybranych parametrów na rozkład temperatury dla okresu nagrzewania wypełnienia regeneracyjnego wymiennika ciepła
Autorzy:
Chylińska, D.
Powiązania:
https://bibliotekanauki.pl/articles/402260.pdf
Data publikacji:
2015
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
regenerative heat exchanger
heat transfer
non-stationary state
method of elementary balances
regeneracyjny wymiennik ciepła
wymiana ciepła
stan niestacjonarny
metoda bilansów elementarnych
Opis:
The article describes the process of unsteady heat transfer that occurs between the impletion of regenerative heat exchanger and the surrounding air. A mathematical model of this phenomenon and its exemplary solution using the method of elementary balances were presented. Numerical calculations using Mathcad were applied. As a result, the set temperature field is formed in the heat exchanger wall. The influence of the geometrical dimensions (length of the filling) and air velocity on the temperature distribution in the fill were analysed.
Źródło:
Structure and Environment; 2015, 7, 1; 29-33
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Integration of experimental and computational methods for identifying geometric, thermal and diffusive properties of biomaterials
Autorzy:
Weres, J.
Kujawa, S.
Olek, W.
Czajkowski, L.
Powiązania:
https://bibliotekanauki.pl/articles/25176.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
experimental method
computational method
identification
geometrical property
thermal property
diffusive property
biomaterial
heat transport
water transport
agro-food product
forest product
Źródło:
International Agrophysics; 2016, 30, 2
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Further Study on Thermal Performance of Porous Fin with Temperature-Dependent Thermal Conductivity and Internal Heat Generation using Galerkin’s method of Weighted Residual
Autorzy:
Sobamowo, M. G.
Kamiyo, O. M.
Adeleye, O. A.
Powiązania:
https://bibliotekanauki.pl/articles/1046542.pdf
Data publikacji:
2019
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Galerkin’s method of weighted residual
Porous Fin
Surface convective heat transfer
Temperature-Dependent Thermal Conductivity and Internal Heat Generation
Thermal performance
Opis:
This work is presented as a further study to our previous work, “Thermal performance analysis of a natural convection porous fin with temperature-dependent thermal conductivity and internal heat" published in "Thermal Science and Engineering Progress. 1 (2017) 39–52”, where it was assumed that the surface convection is negligible and heat is transferred only by natural convection in the porous fin. In this present study, such an assumption has been relaxed. Also, effects of surface convective heat transfer on the thermal performance of porous fin with temperature-dependent thermal conductivity and internal heat generation have been investigated using Galerkin’s method of weighted residual. The results of the Galerkin’s method of weighted residual show excellent agreement with the results of numerical method using shooting method coupled with Runge-Kutta method and also with the results of homotopy perturbation method. Thereafter, the developed analytical solutions are used to investigate the influences of the thermal model parameters on the thermal performance of the porous fin. It is found as the with the other model parameters that as the convective parameter increases, the rate of heat transfer from the base of the fin increases and consequently, the porous fin efficiency improves. However, increase in the nonlinear thermal conductivity parameter decreases the temperature distribution in the fin. Based on the high accuracy of the Galerkin’s method of weighted residual as displayed in this work, it is hoped that the simple analytical solutions given by the approximate analytical method will enhance the analysis of extended surfaces and also assist the designers.
Źródło:
World Scientific News; 2019, 138, 2; 167-191
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczanie dwuwymiarowego pola temperatury wrzącej cieczy w przepływie przez pionowy minikanał
Determination of two-dimensional temperatuure field of boiling liquid flowing in a vertical minichannel
Autorzy:
Hożejowska, S.
Powiązania:
https://bibliotekanauki.pl/articles/2072295.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
metoda Trefftza
minikanał
wrzenie w przepływie
współczynnik przejmowania ciepła
wymiana ciepła
Trefftz method
minichannel
boiling in flow
heat transfer coefficient
heat transfer
Opis:
Celem pracy jest zastosowanie metody Trefftza do wyznaczenia dwuwymiarowego pola temperatury wrzącego czynnika chłodniczego płynącego przez asymetrycznie ogrzewany prostokątny minikanał. Dla równania zachowa¬nia energii przy znanym profilu prędkości wyprowadzono funkcje Trefftza. Obliczenia przeprowadzono dla fazy ciekłej. Wyniki porównano z uproszczonym modelem, gdzie rozwiązanie metodą Trefftza połączono z metodą operacji odwrotnych. W obu podejściach otrzymano zbieżne wyniki.
Application of the Trefftz method in the determination of two-dimensional temperature field of boiling liquid flowing through an asymmetrically heated rectangular minichannel is presented in the paper. The Trefftz functions for a known velocity profile were introduced in the energy balance equation Calculations were performed for liquid phase only. The results were compared with a simplified model where the Trefftz method was combined with inverse operations. Both approaches gave similar results.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 4; 319--320
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ventilation heat loss in a multifamily building under varying air density
Autorzy:
Michalak, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/95344.pdf
Data publikacji:
2020
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
air density
heat capacity
dry air
volumetric heat capacity
ventilation heat loss
EN ISO 13790
monthly method
gęstość powietrza
pojemność cieplna
suche powietrze
objętościowa pojemność cieplna
wentylacyjna strata ciepła
Opis:
Standards related to calculation methods used in building energy performance simulation tools usually impose constant volumetric heat capacity of air. However, this simplification may result in errors if the actual conditions differ from the assumptions made. The paper presents the problem of dry air density and specific heat capacity variation and their influence on calculated energy use for space heating in a multifamily building. The monthly calculation method of PN-EN ISO 13790 was used. Simulations were performed in five cities, each in one climatic zone according to PN-EN 12831. Variation of the air density caused by air temperature and elevation resulted in differences in calculated heating demand from -4.5% to 4.5% in relation to that at constant volumetric heat capacity assumed in PN-EN ISO 13790.
Źródło:
Journal of Mechanical and Energy Engineering; 2020, 4, 1; 97-102
2544-0780
2544-1671
Pojawia się w:
Journal of Mechanical and Energy Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie metody elektrokalorymetrycznej do wyznaczania ciepła właściwego wodnych roztworów soli sodowej karboksymetylocelulozy
Application of electrocalorimetric method for the determination of specific heat of aqueous solutions of carboxymethylcellulose sodium salt
Autorzy:
Prałat, K.
Powiązania:
https://bibliotekanauki.pl/articles/2072828.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
ciepło właściwe
roztwór Na-CMC
metoda kalorymetryczna
specific heat
Na-CMC
aqueous solutions
calorimetric method
Opis:
Praca przedstawia wyniki badań doświadczalnych wyznaczania ciepła właściwego cieczy newtonowskich: wody, gliceryny, oleju rzepakowego oraz wodnych roztworów soli sodowej karboksymetylocelulozy Podczas pomiarów wykorzystano metodę elektrokalorymetryczną. Obliczone wartości ciepła właściwego dla cieczy wzorcowych były w zakresie 1660÷ 4234 [J/(kg K)] i nie różniły się od danych literaturowych więcej niż o 1,1%. W przypadku roztworu polimeru ciepło właściwe wzrasta wraz z jego stężeniem. Istotny wpływ na otrzymane wyniki ma również masa molowa. Najwyższe wartości ciepła właściwego uzyskano dla Na-CMC o masie molowej 7-105 kg/kmol i stężeniu 0,005 kg polim./kg. Otrzymany wynik był o ponad 15% wyższy od ciepła właściwego wody.
Results of the specific heat determination of three Newtonian liquids and six carboxymethylcellulose sodium salt aqueous solutions are presented and discussed in the paper. The electrocalorimetric method was used during measurements. The calculated values of specific heat coefficients were in a range of 1660÷ 4234 [J/(kg.K)] for standard liquids and did not deviate from the literature values more than 1.1 %. The highest values were obtained for Na-CMC with a molar mass of 7-105 [kg/kmol] and concentration of 0.005 [kg p/kg]. This result was more than 15% higher compared to water. Keywords: specific heat, Na-CMC aqueous solutions, calorimetric method
Źródło:
Inżynieria i Aparatura Chemiczna; 2015, 1; 14--15
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of resisdence time measurements on heat exchangers for the determination of dispersive Peclet numbers
Autorzy:
Roetzel, W.
Na Ranong, C.
Powiązania:
https://bibliotekanauki.pl/articles/240480.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat exchanger
dispersion model
transient tracer experiment
evaluation method
wymiennik ciepła
model dyspersji
metoda oceny
Opis:
The recently developed special unity Mach number dispersion model prescribes the corrections to heat transfer coefficients which are simple functions of the dispersive Peclet numbers. They can be determined through the residence time measurements. An evaluation method is described in which the measured input and response concentration profiles are numerically Laplace transformed and evaluated in the frequency domain. A characteristic mean Peclet number is defined. The method is also applied to the parabolic dispersion model and the cascade model. A calculated example of a tube bundle with maldistribution and backflow demonstrates the suitability of the evaluation method.
Źródło:
Archives of Thermodynamics; 2014, 35, 2; 103-115
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of dynamic buckling of FG plate due to heat flux pulse
Autorzy:
Czechowski, L.
Powiązania:
https://bibliotekanauki.pl/articles/265612.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
dynamic buckling
heat flux
finite element method
FGMs
ceramics
metoda elementów skończonych
ceramika
strumień ciepła
Opis:
The paper deals with a FEM analysis of dynamic buckling of functionally graded clamped plates under heat flux loading with huge power. The materials of structures as well as their properties are varying in each layer across the plate thickness formulated by the power law distribution. The heat flux was applied evenly to the whole ceramic surface. The analysis was developed in the ANSYS 14.5 software. The duration of the heat flux loading equal to a period of natural fundamental flexural vibrations of given structures was taken into consideration. To implement large deflections of structures, the Green-Lagrange nonlinear-displacement equations and the incremental Newton-Raphson algorithm were applied. An evaluation of the dynamic response of structures was carried out on basis of the Budiansky-Hutchinson criterion. The studies were conducted for different volume fraction distributions and different shapes of the heat flux loading. The computation results of the heat flux versus maximal plate deflection are shown and discussed.
Źródło:
International Journal of Applied Mechanics and Engineering; 2015, 20, 1; 19-31
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ciepło spalania ziarniaków zbóż o obniżonych cechach jakościowych
Heat of combustion of grains caryopses of lowered quality properties
Autorzy:
Żabiński, A.
Sadowska, U.
Wcisło, G.
Powiązania:
https://bibliotekanauki.pl/articles/291473.pdf
Data publikacji:
2012
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
porośnięte ziarniaki zbóż
ciepło spalania
metoda kalorymetryczna
sprout grain caryopses
heat of combustion
calorimeter method
Opis:
Celem podjętych badań było określenie i porównanie wartości ciepła spalania ziarna jakościowego oraz porośniętego, gatunków zbóż z podrodziny wiechlinowatych. Badania wykonano za pomocą kalorymetru zgodnie z obowiązującą normą PN-EN ISO 9831:2005. Na podstawie otrzymanych wyników stwierdzono m.in., że największą średnią wartością ciepła spalania spośród badanych gatunków zbóż charakteryzują się ziarniaki owsa. Dotyczy to zarówno ziarna jakościowego jak i porośniętego tego gatunku, a otrzymane wartości to odpowiednio 18,62 i 18,02 MJ*kg-1. Najmniejsze wartości ciepła spalania zarejestrowano natomiast dla ziarniaków pszenicy i pszenżyta. Ciepło spalania ziarna jakościowego tych gatunków wynosiło odpowiednio 17,25 i 17,24 MJ*kg-1, porośniętego natomiast 17,07 i 17,01 MJ*kg-1 Porównując wartości ciepła spalania ziarna jakościowego z porośniętym w obrębie każdego z badanych gatunków stwierdzono istotne różnice pod tym względem tylko w przypadku żyta i owsa. Ziarno jakościowe tych gatunków charakteryzowało się istotnie wyższymi wartościami ciepła spalania w stosunku do porośniętego. Dla ziarna jakościowego żyta wartość ta wynosiła 17,68 MJ*kg-1, dla porośniętego 17,22 MJ*kg-1.
The purpose of the research was to determine and compare values of the heat of combustion of the quality and the sprout seed, grain varieties belonging to a sub-variety of graminae. The research was conducted using the calorimeter pursuant to the applicable standard PN-EN ISO 9831:2005. Based on the obtained results it was stated, inter alia, that oat caryopses are characterised by the highest mean value of the heat of combustion among the examined grain varieties. It concerns both the quality seed as well as the sprout seed of this variety and the obtained values are respectively 18.62 and18.02 MJ*kg-1. Whereas, the lowest values of the heat of combustion were recorded for wheat and triticale caryopses. The heat of combustion of the quality seed of these varieties was respectively 17.25 and 17.24 MJ*kg-1, while the sprout seed was 17.07 and 17.01 MJ*kg-1. While comparing values of the heat of combustion of the quality seed with the sprout seed within each of the examined varieties, significant differences were noticed in case of rye and oat. The quality seed of these varieties was characterised by significantly higher values of the heat of combustion in relation to the sprout seed. For the quality seed of rye, this value was 17,68 MJ*kg-1, for the sprout seed 17,22 MJ*kg-1.
Źródło:
Inżynieria Rolnicza; 2012, R. 16, nr 2, t. 1, 2, t. 1; 353-359
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An analytical method for solving the two-phase inverse Stefan problem
Autorzy:
Hetmaniok, E.
Słota, D.
Wituła, R.
Zielonka, A.
Powiązania:
https://bibliotekanauki.pl/articles/200444.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Inverse Stefan problem
homotopy analysis method
heat transfer
solidification
przepływ ciepła
krzepnięcie
homotopijna metoda analizy
Opis:
In the paper we present an application of the homotopy analysis method for solving the two-phase inverse Stefan problem. In the proposed approach a series is created, having elements which satisfy some differential equation following from the investigated problem. We reveal, in the paper, that if this series is convergent then its sum determines the solution of the original equation. A sufficient condition for this convergence is formulated. Moreover, the estimation of the error of the approximate solution, obtained by taking the partial sum of the considered series, is given. Additionally, we present an example illustrating an application of the described method.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2015, 63, 3; 583-590
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of temperature oscillation experiment for the determination of heat transfer coefficient and dispersive Peclet number
Autorzy:
Roetzel, W.
Na Ranong, C.
Powiązania:
https://bibliotekanauki.pl/articles/240047.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat exchanger
temperature oscillation experiment
evaluation method
dispersion model
wymiennik ciepła
metoda oceny
dyspersja
model
Opis:
An evaluation method is developed for temperature oscillation experiments in heat exchangers. The unity Mach number dispersion model is applied. For the consideration of lateral wall heat conduction an effective wall thickness is introduced together with a wall heat transfer coefficient. The evaluation method may also be applied to single blow experiments with pulse signals. A sensitivity analysis describes and discusses the accuracy of different evaluation procedures.
Źródło:
Archives of Thermodynamics; 2018, 39, 1; 91-110
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie metody prądów wirowych w badaniach struktury obrobionej cieplnie stali NC11LV
Application of the eddy current method in the investigation of heat treated NC11LV steel
Autorzy:
Pachutko, B.
Powiązania:
https://bibliotekanauki.pl/articles/211660.pdf
Data publikacji:
2007
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Obróbki Plastycznej
Tematy:
struktura
stal narzędziowa
obróbka cieplna
metoda prądów wirowych
structure
tool steel
heat treatment
eddy current method
Opis:
W artykule przedstawiono wyniki oceny zmian struktury stali NC11LV, obrobionej cieplnie w różnych warunkach tzn. hartowanej z temperatury 1020 i 1150 C oraz odpuszczonej po hartowaniu w zakresie temperatury 180÷575 C, na podstawie badań metodą prądów wirowych przy częstotliwości prądu magnesującego 0,5 kHz (przyrząd Wirotest 03) i 50 kHz (przyrząd Wirotest 301). Strukturę próbek dokumentowano za pomocą mikroskopu świetlnego ECLIPSE L150 oraz mikroskopu skaningowego VEGA TC - dla wybranych próbek. Zawartość austenitu szczątkowego określono metodą rentgenowską. Wskazania przyrządów wiroprądowych odniesiono do zmian twardości HRC próbek hartowanych z obu temperatur i odpuszczonych oraz zmian zawartości austenitu szczątkowego próbek hartowanych z wyższej temperatury i odpuszczonych. W badaniach stwierdzono liniowy charakter zmian wskazań przyrządu wiroprądowego (przy częstotliwości 50 kHz) od zawartości austenitu szczątkowego w próbkach hartowanych z temperatury 1150 C i odpuszczonych w zakresie temperatury 180÷575 C. Pozwala to rekomendować metodę prądów wirowych do określania zawartości austenitu szczątkowego w stalach narzędziowych.
The work presents the results of the assessment of structure changes of NC11LV steel as heat treated under various conditions, i.e. quenched from 1020 and 1150 ?C and tempered after quenching within the temperature range of 180÷575 ?C, based on the investigation by the eddy current method with the magnetizing current frequency of 0.5 kHz (Wirotest 03 device) and 50 kHz (Wirotest 301 device). The structure of the samples has been recorded by means of an ECLIPSE L 150 optical microscope and a VEGA TC scanning Microscope - for selected samples. The content of retained austenite has been determined by the x-ray method. The indications of the eddy current devices have been related to the changes of the HRC hardness of the samples quenched from both temperatures and tempered, as well as to the changes of the retained austenite content of the samples quenched from the higher temperature and tempered. Practical application of the eddy current method for quality assessment of the investigated steel structure can generate some difficulties only in the case of samples in which the effect of secondary hardness takes place during tempering. The investigation has shown linear character of the eddy current device indication changes (at the frequency of 50 kHz) depending on the content of retained austenite in the samples quenched from 1150 ?C and tempered within the range of 180 ÷575 ?C. This allows us to recommend the eddy current method for determining the retained austenite content in tool steels.
Źródło:
Obróbka Plastyczna Metali; 2007, 18, 2; 33-42
0867-2628
Pojawia się w:
Obróbka Plastyczna Metali
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of aerodynamic characteristics on the heat exchanging in the cooling system
Vlijanie aehrodinamicheskikh kharacteristik potoka na teploobmen v sisteme okhlazhdenija
Autorzy:
Gusentsova, E.
Powiązania:
https://bibliotekanauki.pl/articles/791875.pdf
Data publikacji:
2012
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
diesel locomotive
cooling system
heat exchanger
air flow
energy index
aerodynamics
mathematical model
numerical method
calculation
Opis:
The adequate mathematical model of diesel locomotive cooling device is offered. The solution of this model is received by numerical method of calculation. The optimization criterion and the method of accounting the influence of aerodynamics on heat exchange process are offered.
Предложена адекватная математическая модель охлаждающего устройства тепловоза. Решение данной модели получено численным методом. Предложен критерий оптимизации и методика учета влияния аэродинамик на процесс теплообмена. Ключевы е слова : локомотив, охлаждающая система, теплообменник, течение воздуха, энергетический показатель, критерий Прандтля.
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 3
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation method of single blow experiment for the determination of heat transfer coefficient and dispersive Peclet number
Autorzy:
Roetzel, W.
Na Ranong, C.
Powiązania:
https://bibliotekanauki.pl/articles/240735.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat exchanger
single blow experiment
evaluation method
dispersion model
wymiennik ciepła
eksperyment
metoda oceny
model dyspersji
Opis:
An evaluation method is developed for single blow experiments with liquids on heat exchangers. The method is based on the unity Mach number dispersion model. The evaluation of one experiment yields merely one equation for the two unknowns, the number of transfer units and the dispersive Peclet number. Calculations on an example confirm that one single blow test alone cannot provide reliable values of the unknowns. A second test with a liquid of differing heat capacity is required, or a tracer experiment for the measurement of the Peclet number. A modified method is developed for gases. One experiment yields the effective number of transfer units and approximate values of the two unknowns. The numerical evaluation of calculated experiments demonstrates the applicability of the evaluation methods.
Źródło:
Archives of Thermodynamics; 2015, 36, 4; 3-24
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analytical solution for magnetohydrodynamic stagnation point flow and heat transfer over a permeable stretching sheet with chemical reaction
Autorzy:
Rasekh, A.
Farzaneh-Gord, M.
Varedi, S. R.
Ganji, D. D.
Powiązania:
https://bibliotekanauki.pl/articles/279659.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
MHD stagnation point flow
permeable stretching sheet
heat and mass transfer
Optimal Homotopy Asymptotic Method (OHAM)
Opis:
This work deals with the problem of steady two-dimensional magnetohydrodynamic (MHD) stagnation point flow towards a permeable stretching sheet with chemical reaction. The fundamental equations of the boundary layer are transformed into ordinary differential equations, which are then solved analytically using the Optimal Homotopy Asymptotic Method (OHAM). Comparisons are made between the results of the proposed method and the numerical method (fourth-order Runge-Kutta) in solving this problem, and excellent agrement has been observed. Subsequently, effects of different involved parameters on the temperature profiles, concentration profiles, local Nusselt number, local Sherwood number and skin-friction coefficient are presented and discussed in detail.
Źródło:
Journal of Theoretical and Applied Mechanics; 2013, 51, 3; 675-686
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza numeryczna rozkładu temperatury w zewnętrznej przegrodzie pionowej
Numerical analysis of temperature distribution in outside vertical compartment
Autorzy:
Derlatka, A.
Lacki, P.
Powiązania:
https://bibliotekanauki.pl/articles/2065309.pdf
Data publikacji:
2014
Wydawca:
Politechnika Częstochowska
Tematy:
metoda elementów skończonych
rozkład temperatury
współczynnik przenikania ciepła
finite element method
temperature distribution
heat transfer coefficient
Opis:
W pracy przedstawiono analizę zewnętrznej przegrody pionowej. Poprzez współczynnik przenikania ciepła, wyznaczony analitycznie, określono charakterystykę ochrony cieplnej przegrody. Wykorzystując symulacje komputerowe, wyznaczono rozkład temperatury w przegrodzie oraz czas potrzebny do uzyskania stanu ustalonego. Analizę numeryczną przeprowadzono za pomocą programu ADINA System opartego na metodzie elementów skończonych.
The paper presents the analysis of external wall. Based on heat transfer coefficient, the characteristics of the thermal protection of wall was defined. The heat transfer coefficient was estimated by analytical method. The temperature distribution in the partition and time required to achieve steady state were determined by numerical methods. The ADINA System based on the Finite Element Method (FEM) was used for the calculations.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2014, 1 (13); 22--27
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On problems of heat and mass transfer in concrete structures
Metoda stochastycznych różnic skończonych w problemach przepływu ciepła i ruchu wilgoci w elemencie betonowym
Autorzy:
Kowalik, M.
Poński, M.
Powiązania:
https://bibliotekanauki.pl/articles/2067862.pdf
Data publikacji:
2016
Wydawca:
Politechnika Częstochowska
Tematy:
concrete
heat and mass transfer
uncertainty
perturbation method
beton
przepływ ciepła i masy
losowość
metoda perturbacyjna
Opis:
A stochastic finite difference approach based on stochastic finite elements is proposed for heat and mass transfer modeling. Porous structure with random material properties is investigated. The theoretical formulation of the problem is described. A system of partial differential equations is obtained and solved for first two probabilistic moments of the random temperature field. Example of stochastic thermal analysis in concrete structure with random material parameters are given.
W artykule zastosowano metodę stochastycznych różnic skończonych do analizy problemów przepływu ciepła i ruchu wilgoci. Przedstawiono sformułowanie teoretyczne problemu. Badano porowatą strukturę z losowymi parametrami materiałowymi. Do rozwiązania zagadnienia zastosowano metodę perturbacyjną.
Źródło:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo; 2016, 22 (172); 171-183
0860-7214
Pojawia się w:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the finite element method to the determining of boiling heat transfer coefficient for minichannel flow
Autorzy:
Piasecka, M.
Maciejewska, B.
Powiązania:
https://bibliotekanauki.pl/articles/240586.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat transfer
incipience of flow boiling
finite element method
przepływ ciepła
przepływ wrzenia
metoda elementów skończonych
Opis:
Miniature heat exchangers are used to provide higher cooling capacity for new technologies. This means a reduction in their size and cost but the identical power. The paper presents the method for determination of boiling heat transfer coefficient for a rectangular minichannel of 0.1 mm depth, 40 mm width and 360 mm length with asymmetric heating. Experimental research has focused on the transition from single phase forced convection to nucleate boiling, i.e., the zone of boiling incipience. The ‘boiling front’ location has been determined from the temperature distribution of the heated wall obtained from liquid crystal thermography. The experiment has been carried out with R-123, mass flux 220 kg/(m2s), pressure at the channel inlet 340 kPa. Local values of heat transfer coefficient were calculated on the basis of empirical data from the experiment following the solution of the two-dimensional inverse heat transfer problem. This problem has been solved with the use of the finite element method in combination with Trefftz functions. Temperature approximates (linear combinations of Trefftz functions) strictly fulfill the governing equations. In presented method the inverse problem is solved in the same way as the direct problem. The results confirmed that considerable heat transfer enhancement takes place at boiling incipience in the minichannel flow boiling. Moreover, under subcooling boiling, local heat coefficients exhibit relatively low values.
Źródło:
Archives of Thermodynamics; 2013, 34, 1; 55-69
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Określenie przewodności cieplnej wybranych gatunków żeliwa sferoidalnego za pomocą pomiaru przewodnictwa temperaturowego metodą Laser-Flash
Determination of thermal conductivity of selected types of ductile iron (spheroidal graphite/cast iron) by means of thermal diffusivity measurements with Laser-Flash method
Autorzy:
Gazda, A.
Homa, M.
Powiązania:
https://bibliotekanauki.pl/articles/391751.pdf
Data publikacji:
2009
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Odlewnictwa
Tematy:
przewodnictwo temperaturowe
przewodność cieplna
ciepło właściwe
metoda laserowa LF
żeliwo ADI
thermal diffusivity
heat conductivity
specific heat
laser flash method (LFM)
austempered ductile iron (ADI)
Opis:
W pracy przedstawiono wyniki pomiarów przewodnictwa temperaturowego w funkcji temperatury dla dwóch gatunków żeliwa sferoidalnego przy zastosowaniu jednego z najnowocześniejszych zestawów aparaturowych LFA 427 (Laser Flash Apparatus) firmy Netzsch. Do pomiaru ciepła właściwego c[sub]p(T) i gęstości p(T) wykorzystano metody dynamicznej analizy termicznej - różnicową kalorymetrię skaningową DSC i technikę dylatometryczną, co pozwoliło na obliczenie współczynników przewodzenia ciepła λ(T) za pomocą oprogramowania Netzsch LFA Analysis. Zaobserwowano zmiany nachylenia krzywej zależności przewodnictwa temperaturowego od temperatury oraz gwałtowną zmianę przebiegu przewodności cieplnej λ(T) wywołaną przez efekt cieplny, zarejestrowany na krzywej C[sub]p(T). Pozwoliło to na identyfikację procesu dekompozycji struktury ausferrytycznej, polegającego na rozpadzie wysokowęglowego austenitu w żeliwie ADI w temperaturze ok. 400°C.
This paper presents the results of measurements of thermal conductivity coefficient as a function of temperature for two species of spheroidal cast iron by using one of the most modern experimental sets LFA 427 (Laser Flash Apparatus) produced by Netzsch Company. In order to measure the specific heat c[sub]p(T) and density p(T), two methods of dynamic thermal analysis were used - differential scanning calorimetric DSC and dilatometric technique. Based on results of these measurements the coefficients of thermal conductivity were calculated with the use of Netzsch LFA Analysis software. Changes of slope of thermal diffusivity coefficient curvilinear dependence on temperature were observed, as well as rapid change on thermal conductivity λ(T) caused by thermal effect registered on c[sub]p(T) dependence. These observations allowed to identify decomposition process of ausferrite, caused from the disintegration of high-carbon retained austenite in ADI cast iron at approximately 400°C.
Źródło:
Prace Instytutu Odlewnictwa; 2009, 49, 2; 5-18
1899-2439
Pojawia się w:
Prace Instytutu Odlewnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie MES zakłóceń przepływu ciepła przy pomiarach temperatury skrawania metodą termoelementu obcego
FEM modeling of disturbances of the heat flow at measurement of the cutting temperature by the inserted thermocouple method
Autorzy:
Mieszczak, W.
Powiązania:
https://bibliotekanauki.pl/articles/270078.pdf
Data publikacji:
2012
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
skrawanie
przepływ ciepła
modelowanie MES
metoda termoelementu obcego
cutting
heat flow
FEM modelling
method of inserted thermocouple
Opis:
Metoda termoelementu obcego wymaga wykonania otworu w narzędziu skrawającym. Jest to zatem metoda inwazyjna, która ma wpływ na postać narzędzia i tym samym na przepływ ciepła w ostrzu narzędzia. Artykuł przedstawia modelowanie MES, które celem jest sprawdzenie wpływu obecności tego otworu na wartości temperatur ostrza podczas skrawania.
The method of the inserted thermocouple requires making the hole in the machining tool. And so it is the invading method which is affecting the form of the tool. The article is describing the FEM modeling used for checking out the influence of this hole on a temperature field within the tool area when cutting
Źródło:
Inżynieria Maszyn; 2012, R. 17, z. 3; 57-71
1426-708X
Pojawia się w:
Inżynieria Maszyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Solution of fractional heat-like and fractional wave-like equation by using modern strategy
Autorzy:
Mohamed, Zain El Abden
Hamza, Amjad
Elzaki, Tarig
Algolam, Mohamed
Elhussein, Shiraz
Powiązania:
https://bibliotekanauki.pl/articles/2233715.pdf
Data publikacji:
2023
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
fractional-order wave-like equation
fractional-order heat-like equation
initial-boundary value problem
Adomian decomposition method
Opis:
This paper introduces a novel form of the Adomian decomposition (ADM) method for solving fractional-order heat-like and wave-like equations with starting and boundary value problems. The derivations are provided in the sense of Caputo. In order to help understanding, the generalised formulation of the current approach is provided. Several numerical examples of fractional-order diffusion-wave equations (FDWEs) are solved using the suggested method in this context. In addition to examining the applicability of the suggested method to the solving of fractional-order heat-like and wave-like equations, a graphical depiction of the solutions to three instructive cases was constructed. Solution graphs were arrived at for integer and fractional-order problems. The derived and exact solutions to integer-order problems were found to be in excellent agreement. The subject of the present research endeavour is the convergence of fractional-order solutions. This strategy is considered to be the most successful way of addressing fractional-order initial-boundary value issues in science and engineering. This strategy is presented here.
Źródło:
Acta Mechanica et Automatica; 2023, 17, 3; 372--380
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ciepło spalania słomy i zgonin orkiszu pszennego nawożonego zróżnicowanymi dawkami potasu
Heat of combustion of straw and wastes from wheat spelt fertilized with varied doses of potassium
Autorzy:
Sadowska, U.
Żabiński, A.
Wcisło, G.
Powiązania:
https://bibliotekanauki.pl/articles/289903.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
słoma
zgoniny
orkisz pszenny
ciepło spalania
metoda kalorymetryczna
straw
waste
wheat spelt
heat of combustion
calorimeter method
Opis:
Celem podjętych badań było określenie i porównanie wartości ciepła spalania słomy oraz zgonin orkiszu pszennego przy zróżnicowanej wilgotności badanego materiału i nawożeniu potasowym. Badania wykonano za pomocą kalorymetru zgodnie z obowiązującą normą PN-EN ISO 9831:2005. Zwiększone nawożenie potasowe powodowało spadek wartości ciepła spalania zarówno słomy, jak i zgonin przy wszystkich zastosowanych wariantach wilgotności. Największe wartości ciepła spalania zarejestrowano zarówno dla słomy, jak i zgonin o wilgotności 3,2% przy pojedynczej dawce potasu wynoszącej 75 kg·ha-1.
The objective of the research was to determine and compare the value of the heat of combustion of straw and waste from wheat spelt at varied moisture of the researched material and potassium fertilization. The research was conducted by means of the calorimeter pursuant to the applicable standard PN-EN ISO 9831:2005. The increased potassium fertilization caused the decrease of the heat of combustion value of both straw and waste at all applied moisture variants. The highest values of the heat of combustion were registered for both straw and waste of 3.2% moisture at a single dose of potassium amounting to 75 kg·ha-1.
Źródło:
Inżynieria Rolnicza; 2013, R. 17, nr 3, t. 1, 3, t. 1; 355-361
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model numeryczny wymiany ciepła w procesach walcowania wlewków półprzemysłowych w linii LPS i wlewków ciągłych w walcowniach blach i prętów
Numerical model of heat transfer in the hot rolling process of semi-industrial ingots in the LPS line and continuously cast semi-products rolled in industrial plate and bar rolling mills
Autorzy:
Cebo-Rudnicka, A.
Malinowski, Z.
Hadała, B.
Gołdasz, A.
Powiązania:
https://bibliotekanauki.pl/articles/182410.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Metalurgii Żelaza im. Stanisława Staszica
Tematy:
wymiana ciepła
walcowanie płaskowników
metoda elementów skończonych
heat transfer
rolling of bars and flats
finite element method
Opis:
W pracy przedstawiono model numeryczny, opisujący przewodzenie ciepła w prętach i płaskownikach walcowanych w linii LPS i innych układach ciągłego walcowania. Rozwiązanie uzyskano w przekroju poprzecznym płaskownika lub pręta. W modelu uwzględniono zmianę kształtu przekroju bryły w wyniku odkształcenia plastycznego. Zmianę kształtu wprowadzono przez transformację przekroju poprzecznego pręta lub płaskownika. W modelu wymiany ciepła uwzględniono ciepło odkształcenia plastycznego, ciepło tarcia na powierzchni styku odkształcanego materiału z walcami. Uwzględniono również efekty cieplne przemian fazowych. Model numeryczny i oprogramowanie testowano w warunkach linii LPS.
The numerical model describing heat transfer in bars and slabs rolled in LPS line and the other rolling systems has been presented in the paper. The solution was obtained at the cross section of the rolled material. The change of workpiece shape caused by plastic deformation was considered. The workpiece shape deformation was introduced by transformation of the cross section of the rolled bar or fl at. The heat of plastic deformation in the deformation zone and the heat of friction at the material/roll interface have been taken into account. Also the latent heat of phase transformation was considered. Numerical model and developed software have been tested at the LPS line.
Źródło:
Prace Instytutu Metalurgii Żelaza; 2012, T. 64, nr 1, 1; 30-34
0137-9941
Pojawia się w:
Prace Instytutu Metalurgii Żelaza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Geometrical and optical analysis of small-sized parabolic trough collector using ray tracing tool SolTrace
Autorzy:
Singh, Raman Kumar
Chandra, Prakash
Powiązania:
https://bibliotekanauki.pl/articles/27312206.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
parabolic trough collector
SolTrace
Monte Carlo ray tracing method
nonuniform heat flux distribution
optical analysis
geometrical analysis
Opis:
The present work is aimed at geometrical optimization and optical analysis of a small-sized parabolic trough collector (PTC). Improving the performance of parabolic trough collectors can greatly justify the use of solar energy. An optimized curvature geometry, the location of the absorber tube, and the heat flux distribution along the circumference of the absorber tube are major features in the geometric optimization and optical modelling of parabolic trough collectors. Rim angle, aperture width, the diameter of the absorber tube, receiver position, and the optimum value of heat flux are the major parameters considered in this work for geometrical and optical analysis. The Monte Carlo ray tracing method has been adopted for analysis. The non-uniform heat flux distribution profile obtained from optical analysis of the proposed parabolic trough collector has been compared with the profile available in the literature, and good agreement has been obtained, which proves the feasibility and reliability of the model and method used for this study. An experimental new small-sized parabolic trough collector has been fabricated for the optimized rim angle of 90 deg after a successful laser light feasibility test. The effect of the absorber tube position along the optical axis on the heat flux profile was analysed and found to be substantial. Furthermore, the sensitivity analysis of the parabolic trough collector using the software applied has been discussed separately.
Źródło:
Archives of Thermodynamics; 2023, 44, 3; 35--61
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rozwiązywanie belek o zmiennej sztywności metodą różnic skończonych
Solution of beams of changeable rigidity with use of finite-difference method
Autorzy:
Buczkowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/40704.pdf
Data publikacji:
2009
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
belki o zmiennej sztywnosci
metoda roznic skonczonych
obciazenie cieplne
obliczenia
beam rigidity
computation
finite difference method
heat load
Źródło:
Acta Scientiarum Polonorum. Architectura; 2009, 08, 3-4
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Solution of the boundary value problem of heat conduction in a cone
Autorzy:
Ramazanov, Murat
Jenaliyev, Muvasharkhan
Gulmanov, Nurtay
Powiązania:
https://bibliotekanauki.pl/articles/2048719.pdf
Data publikacji:
2022
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
non-cylindrical domain
cone
boundary value problem of heat conduction
singular Volterra integral equation
Carleman–Vekua regularization method
Opis:
In the paper we consider the boundary value problem of heat conduction in a non-cylindrical domain, which is an inverted cone, i.e. in the domain degenerating into a point at the initial moment of time. In this case, the boundary conditions contain a derivative with respect to the time variable; in practice, problems of this kind arise in the presence of the condition of the concentrated heat capacity. We prove a theorem on the solvability of a boundary value problem in weighted spaces of essentially bounded functions. The issues of solvability of the singular Volterra integral equation of the second kind, to which the original problem is reduced, are studied. We use the Carleman–Vekua method of equivalent regularization to solve the obtained singular Volterra integral equation.
Źródło:
Opuscula Mathematica; 2022, 42, 1; 75-91
1232-9274
2300-6919
Pojawia się w:
Opuscula Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An application of generalized least squares method to the conduction heat transfer problem
Wykorzystanie uogólnionej metody najmniejszych kwadratów w analizie przewodzenia ciepła
Autorzy:
Ściążko, A.
Powiązania:
https://bibliotekanauki.pl/articles/274796.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
uogólniona metoda najmniejszych kwadratów
przewodzenie ciepła
błąd pomiarowy
generalized least squares method
conduction heat transfer
error of measurement
Opis:
Article presents an application of generalized least squares method to heat transfer problem (the steady-state one-dimensional heat conduction). The theoretical basis of mathematical method was presented as well as general model of conduction heat transfer problem was introduced. During model creation boundary and internal (additional) measurements of temperature in the plate were used. In article the different locations of additional measuring points were checked and the local and global error of obtained models were determined.
Artykuł prezentuje zastosowanie uogólnionej metody najmniejszych kwadratów w analizie problemu transportu ciepła (stacjonarne, jednowymiarowe przewodzenie ciepła). Zaprezentowano teoretyczne podstawy metody matematycznej oraz wprowadzono ogólny model przewodzenia ciepła. Do stworzenia modelu wykorzystano pomiary temperatury na brzegach płyty oraz dodatkowe, wewnętrzne punkty pomiaru. Sprawdzono wpływ wyboru różnych punktów pomiarowych na sumaryczny oraz lokalny błąd uzyskanych modeli matematycznych.
Źródło:
Pomiary Automatyka Robotyka; 2012, 16, 9; 66-69
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies