Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Li, X" wg kryterium: Autor


Tytuł:
Effects of inner and outer scale on beam spreading for a Gaussian wave propagating through anisotropic non-Kolmogorov turbulence
Autorzy:
Gao, C.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/174609.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
anisotropy
Gaussian wave
long-term spreading radius
non-Kolmogorov turbulence
inner scales of turbulence
outer scales of turbulence
Opis:
Experimental results and empirical research have shown that atmospheric turbulence can present the anisotropic property not only at a few meters above the ground but also at high altitudes of up to several kilometers. This paper investigates beam spreading for a Gaussian wave propagating along a horizontal path in weak anisotropic non-Kolmogorov turbulence. Mathematical expressions for the long-term beam spreading radius were obtained based on the generalized von Kármán spectrum for anisotropic turbulence. The final model includes an anisotropic factor, which parameterizes the asymmetry of a turbulence cell, the spectral power law for non-Kolmogorov turbulence, the inner and outer scale of turbulence, and other essential optical parameters of a Gaussian wave. Numerical simulations indicate that the long-term beam spreading radius decreases with an increase in the anisotropic factor. We also analyze how the geometrical optics approximation may cause large errors for a small spectral power law value.
Źródło:
Optica Applicata; 2017, 47, 1; 63-74
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Simulation Research on Chaotic Behavior of Parabolic and Elliptic Underwater Acoustic Ray Equations
Autorzy:
Li, S
Li, X
Powiązania:
https://bibliotekanauki.pl/articles/1400284.pdf
Data publikacji:
2013-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
43.30.+m
05.45.Pq
Opis:
The chaotic behavior of underwater ray system is studied. Because the parabolic equation is an approximation under small ray angle with respect to horizontal, the elliptic equation system is considered here besides the parabolic system. We pay main attention to the interval of large ray angle. A comparison between these two forms of system is performed. We find that when the ray angle is not large (θ_0=0° - 18°), the two systems show the same qualitative behavior. However, in interval of large ray angle (θ_0 ≥ 19°), if the perturbation strength is not very small, e.g. δ=0.05, the parabolic system shows regular motion, while the elliptic system exhibits chaotic behavior in most of this interval except a few quasiperiodic islands studded in the chaotic ocean. Dynamical behaviors of the two systems show surprising difference.
Źródło:
Acta Physica Polonica A; 2013, 123, 1; 53-57
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
State estimation based on Generalized Gaussian distributions
Autorzy:
Li, X.
Xie, Y.
Powiązania:
https://bibliotekanauki.pl/articles/220888.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Generalized Gaussian distributions
state estimation
Gaussian particle pilter
nonlinear systems
Opis:
This paper presents a novel strategy of particle filtering for state estimation based on Generalized Gaussian distributions (GGDs). The proposed strategy is implemented with the Gaussian particle pilter (GPF), which has been proved to be a powerful approach for state estimation of nonlinear systems with high accuracy and low computational cost. In our investigations, the distribution which gives the complete statistical characterization of the given data is obtained by exponent parameter estimation for GGDs, which has been solved by many methods. Based on GGDs, an extension of GPF is proposed and the simulation results show that the extension of GPF has higher estimation accuracy and nearly equal computational cost compared with the GPF which is based on Gaussian distribution assumption.
Źródło:
Metrology and Measurement Systems; 2013, 20, 1; 65-76
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of prefabricated concrete in residential buildings and its safety management
Zastosowanie prefabrykowanego betonu w budynkach mieszkalnych i zarządzanie jego bezpieczeństwem
Autorzy:
Jiao, L.
Li, X. D.
Powiązania:
https://bibliotekanauki.pl/articles/230286.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
beton prefabrykowany
budynek mieszkalny
zarządzanie bezpieczeństwem
prefabricated concrete
residential building
safety management
Opis:
With the development of the society in recent years, there are more and more housing construction areas. The traditional concrete has not been able to satisfy the demand of housing construction. In this study, prefabricated concrete was applied in the design of assembling style houses considering their characteristics, and its economic, environmental and social benefits were analyzed combining risk matrix evaluation method and management strategy. It was found that the use of prefabricated concrete as a building material could effectively shorten the construction period, reduce the construction cost and improve the construction safety, playing a role of energy saving and environmental protection. Therefore it was concluded that prefabricated concrete can improve the efficiency of construction, reduce environmental pollution and save energy. This work provides a reference for the application of prefabricated concrete in residential buildings and its safety management.
Prefabrykowany beton jest rodzajem betonowej konstrukcji budowlanej, która jest wznoszona poprzez montaż i połączenie prefabrykowanych komponentów. Tego rodzaju prefabrykowane komponenty są produkowane, instalowane i podłączane w trybie fabrycznym. Wymagania jakościowe dla komponentów o odmiennych zastosowaniach są różne podczas prefabrykacji. Oprócz kształtu i wydajności, kontrola jakości obejmuje również złożoność struktury łączącej. W aspekcie budowlanym, jakościowym i środowiskowym, budynki mieszkalne, w których stosuje się prefabrykowany beton, mają więcej zalet niż tradycyjne budynki. Może to skrócić czas budowy, poprawić jakość konstrukcji, ułatwić konserwację na późniejszym etapie oraz przyspieszyć wycofanie funduszy. W niniejszym badaniu zastosowano prefabrykowany beton podczas projektowania budynków mieszkalnych, a ponadto zastosowano strategię oceny i zarządzania opartą na macierzy ryzyka. W oparciu o teoretyczne podstawy przetwarzania, środków transportu i instalacji, pokazano przykłady podsumowujące zastosowanie prefabrykowanego betonu w budowie budynków mieszkalnych i zarządzaniu jego bezpieczeństwem.
Źródło:
Archives of Civil Engineering; 2018, 64, 2; 21-35
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Agent-based evacuation in passenger ships using a goal-driven decision-making model
Autorzy:
Ni, B.
Li, Z.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/258666.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
ship evacuation analysis
agent-based model
goal-driven decision-making model
social force model
steering behavior
Opis:
A new agent-based model is proposed to support designers in assessing the evacuation capabilities of passenger ships and in improving ship safety. It comprises models for goal-driven decision-making, path planning, and movement. The goal-driven decision-making model determines an agent’s target by decomposing abstract goals into subgoals. The path-planning model plans the shortest path from the agent’s current position to its target. The movement model is a combination of social-force and steering models to control the agent in moving along its path. The utility of the proposed model is verified using 11 tests for passenger ships proposed by the Maritime Safety Committee of the International Maritime Organization.
Źródło:
Polish Maritime Research; 2017, 2; 56-67
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved linear complexities of the frequency hopping sequences in two optimal sets
Autorzy:
Gao, J.
Li, X.
Wei, Y.
Powiązania:
https://bibliotekanauki.pl/articles/206234.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Instytut Badań Systemowych PAN
Tematy:
frequency hopping sequence
linear complexity
permutation polynominal
optimal set
Opis:
For the anti-jamming purpose, high linear complexity is desired for each frequency hopping sequence in an optimal set. Using a proper power permutation, Wang has shown that an optimal set of frequency hopping sequences with small linear complexity can be transformed into a new optimal set of frequency hopping sequences with large linear complexity. This paper conains two results. First, we extend the result of Wang. A power permutation is only suitable for a special construction of optimal set of frequency hopping sequences, see Wang (2011). However, the power permutation chosen in this paper applies to the general construction of optimal set of frequency hopping sequences. Second, by using a binomial permutation polynomial P(x), which is different from those permutations used before, we obtain a novel optimal set of frequency hopping sequences with high linear complexity from an optimal set of frequency hopping sequences with small linear complexity. By counting the number of different roots in the sequence representation, we determine the linear complexities of the frequency hopping sequences in two optimal sets transformed by the power permutation or binomial permutation.
Źródło:
Control and Cybernetics; 2012, 41, 2; 317-334
0324-8569
Pojawia się w:
Control and Cybernetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design of Rascheltronic Vamp Fabric with Double-Colour Pitting Effect
Projektowanie dzianin dwukolorowych z efektem pittingu
Autorzy:
Li, X.
Zhang, A.
Jiang, G.
Powiązania:
https://bibliotekanauki.pl/articles/232311.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
warp knitting
rascheltronic
vamp fabric
double-colour pitting effect
CAD
projektowanie dzianin dwukolorowych
wspomaganie komputerowe
dzianina
Opis:
Applications of Piezo jacquard and CAD technology in warp-knitting have provided traditional jacquard fabrics with the possibility of innovating the structure design. Research on innovative design and fabrication is conducted aiming at knitting jacquard vamp fabric with the double-colour pitting effect on a technical back. By utilising Piezoelectric jacquard’s performance of displacing both underlapping and overlapping, new structures are formed, such as mesh stitches, koper stitches and float structures. Based on threading with yarns in two colors, jacquard bars in split execution create a pattern with a double-colour effect. To realize a highly efficient design, the paper proposes a computer-aided jacquard design method covering technical parameters and jacquard pattern design modules. Additionally, to pursue convenience and efficiency, mathematic models are built in terms of an automatic borderline design, loop stitching inspection and structure database. The method of jacquard vamp fabric design with a double-color pitting effect has been proven practically by illustrating a vamp design example which meets the requirement of fashion and performance well.
Projektowanie dzianin dwukolorowych z efektem pittingu jest możliwe przy użyciu komputerowego systemu projektowania opartego na specjalnej metodzie dziewiarskiej. Dzięki macierzy i modelowi matematycznemu system obejmuje wszystkie podstawowe parametry techniczne modułów projektowego i kontrolnego oraz modułu bazy danych struktur, które współpracują w celu sprawnego projektowania dzianiny. Na podstawie otrzymanych wyników badań stwierdzono, że wspomagana komputerowo metoda projektowania może być z powodzeniem stosowana w projektowaniu dzianin dwukolorowych z efektem pittingu.
Źródło:
Fibres & Textiles in Eastern Europe; 2017, 3 (123); 92-97
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pseudo-static experiment and analysis on seismic behavior of the RC columns strengthened by GHPFRCC
Autorzy:
Li, X.
Wang, J.
Luo, M.
Powiązania:
https://bibliotekanauki.pl/articles/259179.pdf
Data publikacji:
2015
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
green high performance fiber reinforced cementitious composites (GHPFRCC)
pseudo-static test
reinforced concrete column
strengthening
seismic performance
Opis:
Green high performance fiber reinforced cementitious composites (GHPFRCC) are a new class of sustainable cementitious composites, employing a high volume of fly ash to replace cement. In addition to increasing the sustainability of the construction environment, GHPFRCC exhibits a high tensile ductility and multiple cracking behaviors in the strainhardening state. These materials can effectively improve the structural energy dissipation capacity and structural durability. In this study, the optimum mixture ratio of GHPFRCC is presented established using an orthogonal experiment for a specific engineering application. The described GHPFRCC sustains the mechanical performance of concrete and is employed as the outer cladding to strengthen concrete columns. The finite element analysis of the material was based on the software ABAQUS and pseudo static experiments were conducted to exhibit retrofitting of GHPFRCC applied in the rehabilitation of seismic-damaged concrete columns. The computed and experimental results showed that GHPFRCC, while incorporating high volume fly ash, can retain significant multiple cracking behaviors. The energy dissipation capacity of the GHPFRCC reinforced concrete (RC) column is better than the comparable unreinforced column.
Źródło:
Polish Maritime Research; 2015, S 1; 56-60
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Experimental Study on Unipolar Induction
Autorzy:
Chen, K.
Li, X.
Hui, Y.
Powiązania:
https://bibliotekanauki.pl/articles/1030345.pdf
Data publikacji:
2017-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
01.55.+b
03.50.De
06.30.Ka
41.20.Gz
Opis:
Unipolar induction phenomenon is a special kind of electromagnetic induction. There are two quite opposite theoretical explanations for this phenomenon, i.e., the N theory and the M theory. The research of unipolar induction has made significant progress, but there is no final conclusion by now. In this paper, an experiment of inversely rotating double Faraday disks and double magnets are designed, and the unipolar induction phenomenon is verified by means of theoretical calculation and experiment. Comparing and analyzing the theoretical calculation and experiment results, our experimental results support the N theory, that is to say, our experiment shows that the magnetic field does not rotate when the magnet rotates.
Źródło:
Acta Physica Polonica A; 2017, 131, 2; 271-274
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Asymmetry and Contradiction of Mirror Misalignments Influence of Off-Axial Cylindrical Hybrid Resonator
Autorzy:
Wang, N.
Li, X.
Zhu, H.
Powiązania:
https://bibliotekanauki.pl/articles/1399267.pdf
Data publikacji:
2013-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
42.55.Xi
42.60.Da
42.60.Jf
Opis:
The output far-field intensity distributions of off-axial cylindrical hybrid resonator with different mirror misalignments are simulated by coordinate transformation fast Fourier-transform algorithm. The simulations showed that the mirror misalignments influence is different in anticlockwise and clockwise tilt direction. According to the calculation results, the output beam quality of off-axial unstable resonator is analyzed, from the aspects of $M^2$ value and power in the bucket curves. Furthermore, the analysis brings out an interesting contradiction that the beam quality changing evaluated by $M^2$ value is different from that by power in the bucket curves when the mirror misalignments occurred in anticlockwise direction. It demonstrated that the beam quality evaluation of off-axial unstable resonator should not be one-sided.
Źródło:
Acta Physica Polonica A; 2013, 124, 4; 661-664
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Buckling analysis of airframe jointed panel under combined loading
Autorzy:
Li, X.
Jia, D.
Meng, C.
Powiązania:
https://bibliotekanauki.pl/articles/264575.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
wytrzymałość
wyboczenie
obciążenie
strength
buckling analysis
jointed panel
combined loading
Opis:
The complicated relationship of the high order static indeterminate structure will lead to a lot of calculation work. The strength analysis of the structure is very difficult. In aircraft design phase, a structural simplified method should be used to model the load characteristics of the structure. In the paper, the buckling analysis of airframe jointed panel is investigated under combined loading and the effect of jointed position to buckling load is also presented. For the buckling analysis of special joined structure, one new method which is better than traditional methods is described.
Źródło:
International Journal of Applied Mechanics and Engineering; 2018, 23, 4; 1035-1042
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Properties of RDX-Nitrocellulose Microspheres
Autorzy:
Shi, X.
Wang, J
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/358363.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
RDX
nitrocellulose
flash vaporization process
thermal stability
Opis:
A new insensitive explosive based on RDX and with Nitrocellulose (NC) as binder has been prepared using a flash vaporization process. Scanning electron microscopy was used to characterize the morphology and particle size of the resulting RDX-NC microspheres. X-ray photoelectron spectroscopy, Differential Scanning Calorimetry, impact sensitivity, vacuum stability and burning rate of raw RDX, RDX-NC and RDX-1 were also used to characterize the explosive. The RDX-NC microspheres were found to have a fibrous surface. The microspheres ranged in size from 0.5 μm to 4 μm. The NC formed a coat on the surface of the RDX. The activation energies of raw RDX, RDX-1 and RDX-NC were found to be 200.8 kJ·mol−1, 183.9 kJ·mol−1 and 187.2 kJ·mol−1, respectively. The drop heights of raw RDX, RDX-1 and RDX-NC were found to be 21.3 cm, 51.7 cm and 82.9 cm, respectively. The friction sensitivity of RDX-NC was lower than that of raw RDX and RDX-1. In the vacuum stability test, the volumes of evolved gas from raw RDX, RDX-1 and RDX-NC were 0.12 mL·g−1, 0.12 mL·g−1, and 0.09 mL·g−1, respectively. The burning rates of RDX-NC-based propellants were higher than that of RDX-1 and raw RDX based propellants at 5-15 MPa. The burning rate pressure exponent of RDX-NC based propellants is 0.9929 at 40-200 MPa.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 4; 871-881
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A cyclonic-static micro bubble flotation column for enhancing coalescence of oil droplets from emulsion
Autorzy:
Li, X.
Yan, X.
Zhang, H.
Powiązania:
https://bibliotekanauki.pl/articles/109842.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cyclonic-static micro-bubble flotation column
coalescence
multi-flow pattern
oily wastewater
Opis:
In this work a novel cyclonic-static micro bubble flotation column, using hydraulic separator with a conventional flotation column, was developed to separate oil droplets from emulsions. The system integrated the cyclonic and laminar flow coalescence with the pipe flow coalescence. The effect of process parameters such as circulation pressure, aeration rate, feed volumetric flow rate and viscosity of fluid on the efficiency of multi-flow pattern coalescence was investigated. The obtained results indicated that the coalescence efficiency increased with the circulation pressure, feed volumetric flow rate and aeration rate, whereas an increase in viscosity of fluid reduced the extent of coalescence. Besides, the size distribution of oil droplets in the cyclonic separator, pipe flow section and column flotation section were simulated in the flotation column using a special software. The simulation was compared with experimental data on the mean size of oil droplets.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 1; 307-320
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design of LED collimator for uniform illumination using two freeform lenses
Autorzy:
Zeng, J.
Li, X.
Ge, P.
Powiązania:
https://bibliotekanauki.pl/articles/173429.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
illumination design
lenses
light-emitting diodes
optical design
high uniformity
Opis:
Regulating the illuminance distribution of an LED collimator to produce a uniform illumination in both the near field and the far field is a challenge in illumination design. In this paper, we present an effective method for designing two separated freeform lenses to control the illuminance distribution and the direction of the rays from the LED. The first lens redistributes the ray energy, and the second one collimates them to obtain a uniform collimated illumination. According to the conservation law of energy, Snell’s law, Fermat’s law and tangent-plane iterative method, the two freeform surfaces could be calculated simultaneously. The simulation results show that the two freeform lenses can control most of rays into an angle within ±1.5° for an LED with 1 × 1 mm size. The illuminance uniformities are higher than 0.9 in both the near field and the far field.
Źródło:
Optica Applicata; 2018, 48, 3; 413-420
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An overview of design, control, power management, system stability and reliability in electric ships
Autorzy:
Ni, K.
Hu, Y.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/1193412.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
electric ship
control algorithms
power electronics techniques
power drive system
stability
Opis:
With the fast development of power electronics techniques, electrification of shipboard power systems (SPS) is an unstoppable trend, and the concepts of electric ships (ESs) and all-electric ships (AESs) emerge. In order to meet the constantly increasing electricity demand in SPS, the medium voltage direct current (MVDC) SPS becomes a promising shipboard electrical network architecture. This paper aims to present a comprehensive review of the design, control, power management, system stability and reliability in ESs. The most recent technologies and academic achievements in these fields are discussed. In the near future, it is possible that the electric propulsion technology will be widely applied to various types of ships.
Źródło:
Power Electronics and Drives; 2017, 2, 37/2; 5-29
2451-0262
2543-4292
Pojawia się w:
Power Electronics and Drives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Characterization of CL-20/EPDM by a Crystal Refinement and Spray Drying Method
Autorzy:
Ji, W.
Li, X.
Wang, J.
Powiązania:
https://bibliotekanauki.pl/articles/358349.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
CL-20/EPDM
spray drying
impact sensitivity
thermal stability
Opis:
A 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) based mixed explosive was prepared by a spray drying method using CL-20 suspended in hexane containing EPDM rubber (ethylene-propylene-diene monomer), and made into a stable suspension. The samples were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD), and their thermal stability and impact sensitivity were also measured. The results showed that the ethylene-propylene-diene-monomer rubber (EPDM) can be successfully coated on to the CL-20 crystal surface. Compared to refinement-spray CL-20, the impact sensitivity of CL-20/EPDM was significantly reduced. The characteristic drop height was increased from 28.12 to 39.78 cm. The thermal stability was better than refinement-spray CL-20.
Źródło:
Central European Journal of Energetic Materials; 2015, 12, 4; 831-840
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Analytic Investigation of "Hot-Spot" Formation in Compressible Energetic Materials
Autorzy:
Li, X.
Zhao, F.
Liu, J.
Powiązania:
https://bibliotekanauki.pl/articles/358425.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
analytic model
bulk compressibility
pore collapse
"hot-spot" formation
Opis:
In this paper, the formation of the shock-induced “hot-spot” in compressible energetic materials has been analyzed. By applying the compressible elastic-viscoplastic material model to a hollow sphere, and solving the governing equations with the initial and boundary conditions, this paper proposes an analytic pore collapse model that is able to simulate the viscoplastic deformation which determines the formation of a “hot-spot”. In this new model there are three mechanisms, of which instantaneous deformation and the subsequent quasi-static incompressible deformation dominate “hot-spot” formation, while quasi-static compressible deformation is of little effect. In comparison with the incompressible solution, this model demonstrates that the bulk compressibility has a great influence on “hot-spot” formation, as the degree of the “hot-spot” reaction is a positive quasi-linear function of Poisson’s ratio ν. An error in Kim’s original pore collapse model has also been discussed.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 4; 806-820
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On controllability for fractional differential inclusions in Banach spaces
Autorzy:
Wang, J.
Li, X.
Wei, W.
Powiązania:
https://bibliotekanauki.pl/articles/256046.pdf
Data publikacji:
2012
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
controllability
fractional differential inclusions
Bohnenblust-Karlin's fixed point theorem
Opis:
In this paper, we investigate the controllability for systems governed by fractional differential inclusions in Banach spaces. The techniques rely on fractional calculus, multivalue mapping on a bounded set and Bohnenblust-Karlin's fixed point theorem.
Źródło:
Opuscula Mathematica; 2012, 32, 2; 341-356
1232-9274
2300-6919
Pojawia się w:
Opuscula Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Milan, a history in recreational spaces
Autorzy:
Fabris, L. M. F.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/344869.pdf
Data publikacji:
2016
Wydawca:
Politechnika Krakowska im. Tadeusza Kościuszki. Wydział Architektury. Katedra Kształtowania Środowiska Mieszkaniowego
Tematy:
Milan
public garden
urban park
requalification
regreening
Mediolan
ogród publiczny
park miejski
przekwalifikowanie
Opis:
Milan can count in its attractions one of the most ancient public parks in Europe, the ‘Giardini Pubblici’ (Public Gardens) opened in 1784 by Austrian Government to bring in Lombardy the Vienna’s grandeur. It was a success and can be reported as the first recreational public open space in Italy. After almost 200 hundred years, Milan started to face with the problem of the loss of its green structure overwhelmed by the continuous growing of the urban fabric. The answers were two wide parks devoted with the idea of reforestation that created a new definition of the outskirts of the Lombard metropolis: Boscoincittà (‘Wood-in-the-town’) coming out from the requalification of former agricultural fields and Parco Nord Milano (Northern Milan Park) renovating the brownfields left by heavy industry. Both of them were and are devoted for the recreational use and improved the quality of life of the people living in Milan. At the end of the XX century a new series of parks, at a quarter scale, replaces some former derelict industrial areas, left in various places inside the historic urban context of Milan. Finally in the last ten year Milan regenerated itself changing its skyline, but this kind of ‘revolution’ brought a quantity of new parks and opens spaces really devoted to recreational use at various scales, always in direct connection with the built environment both dedicated to residential or office use. The paper illustrates this time line reporting and discussing how the perception of recreational open spaces has changed in Milan, the un-expected green growing city.
Źródło:
Środowisko Mieszkaniowe; 2016, 17; 107-112
1731-2442
2543-8700
Pojawia się w:
Środowisko Mieszkaniowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Two-Dimensional Optical Imaging of Artificial Magnetic Field in the Laboratory
Autorzy:
Li, X.
An, N.
Feng, X.
Bai, J.
Powiązania:
https://bibliotekanauki.pl/articles/1400280.pdf
Data publikacji:
2013-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
42.25.Ja
42.30.-d
78.20.Ls
Opis:
Two-dimensional images of the artificial magnetic field created by permanent magnets were obtained by means of the Faraday magnetic rotation effect. This provides a convenient and effective means to observe and measure macro-scale magnetic field, as well as lays a base for three-dimensional optical imaging of magnetic field. The magnetic field imaging here can also be considered as a key part of the magnetic rotation geomagnetic field imaging method which we put forward before, and will provide experimental support for this method.
Źródło:
Acta Physica Polonica A; 2013, 123, 1; 34-38
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of nano-silver coating on microbial control of microwave-freeze combined dried sea cucumber
Autorzy:
Li, X.
Zhang, M.
Duan, X.
Mujumdar, A.
Powiązania:
https://bibliotekanauki.pl/articles/25122.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
nano-silver coating
microbial control
microwave-freeze drying
sea cucumber
echinoderm
Stichopus japonicus
Holothurioidea
Źródło:
International Agrophysics; 2011, 25, 2
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Salicylic acid induces physiological and biochemical changes in peony under waterlogging stress
Autorzy:
Zhu, X.
Shi, H.
Li, X.
Jin, S.
Powiązania:
https://bibliotekanauki.pl/articles/12703759.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Opis:
In this study, the effects of salicylic acid to antioxidative activity and photosynthetic characteristics in waterlogging stress of two peony cultivars (‘Fengdanbai’ and ‘Mingxing’) were investigated. 4-year-old peony grown in different levels of waterlogging stress and then different concentration prepared SA (0.0, 0.1, 0.5 and 1.0 mmol L⁻¹) sprayed on fresh leaves of peony. The antioxidative enzymes activities include superoxide dismutase (SOD), peroxidase (POD) and catalase (CAT), chlorophyll content, relative conductivity and MDA content were measured in leaves about different waterlogging treatment, the photosynthetic characteristics were also measured using photosynthetic measurement system. The results showed that waterlogging stress decreased the chlorophyll content in all peony cultivars leaves, but with SA treatment can inhibit the decrease of chlorophyll content. Relative conductivity increased as the extension of waterlogging time in two cultivars. SA treatment could effectively inhibit the increase of relative conductivity, and 0.5 mmol L⁻¹ of SA was the most suitable concentration. SOD, POD, CAT activity increased first and then decreased in different waterlogging condition, SA significantly increased the activity of various enzymes. MDA content was increase as the expansion of waterlogging time in two cultivars. SA inhibits the increase of MDA content. Of all concentration of SA, 0.5 mmol L⁻¹ was the best concentration to inhibit the waterlogging stress. For the photosynthetic characteristics, the net assimilation rate (Pn), stomatal conductance (Gs), transpiration rate (Tr) and intercellular CO₂ (Ci) were decreased under different waterlogging condition. SA treatment can increase Pn, Gs, Tr and Ci of peony.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2020, 19, 1; 41-52
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Health index synthetization and remaining useful life estimation for turbofan engines based on run-to-failure datasets
Synteza wskaźników stanu technicznego oraz ocena pozostałego okresu użytkowania silników turbowentylatorowych z wykorzystaniem zbiorów danych o pracy do czasu uszkodzenia
Autorzy:
Shi, J.
Li, Y.
Wang, G.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/301447.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
hierarchical clustering
relevance vector machine
run-to-failure
remaining useful life
health indices
prognostics
grupowanie hierarchiczne
maszyna wektorów istotnych
praca do czasu uszkodzenia
pozostały okres użytkowania
wskaźnik stanu technicznego
prognostyka
Opis:
Turbofan engines will gradually degrade until failure occurs or life ends if without maintenance. Reliable degradation assessment and remaining useful life (RUL) estimation make sense on both aviation safety and rational maintenance decisions. This paper proposes a data-driven prognostic method on the premise of run-to-failure (RtF) data which are multivariate sensory data collected from the engines operating from normal to failure. After necessary pre-processing to the data, clustering analysis is executed to generate the clusters which represent the multi-states of the degradation process. The failure state cluster is extracted, and then the distance between the pre-processed data and the cluster is calculated. Therefore, one-dimensional time series are generated and defined as the health indices. Afterwards the degradation models are built based on the health indices. Finally, the RUL of a testing unit can be estimated by similarity analysis with the models. Hierarchical clustering (HC) and relevance vector machine (RVM) are the main algorithms employed in this paper. To validate the proposition, a case study is performed on turbofan engines data from Prognostics Center of Excellence (PCoE) at NASA Ames Research Center, and sufficient comparisons were given.
Silniki turbowentylatorowe niepoddane konserwacji ulegają stopniowej degradacji aż do czasu wystąpienia uszkodzenia lub zakończenia cyklu życia. Rzetelna ocena degradacji oraz pozostałego okresu użytkowania (RUL) mają wpływ zarówno na bezpieczeństwo maszyn lotniczych jak i racjonalne podejmowanie decyzji dotyczących utrzymania ruchu. W artykule zaproponowano sterowaną danymi metodę prognostyczną opartą na danych o pracy do czasu uszkodzenia (run-to failure, RTF), które są wielowymiarowymi danymi sensorycznymi zbieranymi podczas normalnej pracy silnika aż do jego uszkodzenia. Po niezbędnej wstępnej obróbce danych, przeprowadzono analizę skupień w celu wygenerowania skupień reprezentujących multi-stany procesu degradacji. Wyodrębniono klaster stanów uszkodzenia, a następnie obliczono odległość między wstępnie przetworzonymi danymi a wyodrębnionym klastrem. Następnie wygenerowano jednowymiarowe szeregi czasowe, które zdefiniowano jako wskaźniki stanu technicznego. Na podstawie tych wskaźników zbudowano modele degradacji. Wreszcie, w oparciu o analizę podobieństwa do opracowanych modeli oceniono RUL jednostki testowej. Główne algorytmy zastosowane w niniejszym opracowaniu to algorytmy grupowania hierarchicznego (HC) oraz maszyny wektorów istotnych (RVM). Aby zweryfikować zaproponowaną w pracy metodę, przeprowadzono studium przypadku z wykorzystaniem danych dot. silników turbowentylatorowych pochodzące z Prognostic Center of Excellence (PCoE) przy NASA Ames Research Center oraz przedstawiono odpowiednie porównania.
Źródło:
Eksploatacja i Niezawodność; 2016, 18, 4; 621-631
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New application of D-π-A molecules as a sensor for recognition of Cu2+ in polluted water
Autorzy:
Niu, H.
Zhu, G.
Zhu, M.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/207782.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
polluted water
nuclear magnetic resonance spectroscopy
Cu(II)
woda zanieczyszczona
spektroskopia magnetycznego rezonansu jądrowego
Opis:
Novel chromophore GZP1 with D-π-A structure was designed and prepared for its application as a sensor for the recognition of Cu2+ ions in polluted water. Reaction of aldimine condensation was used to synthesize chromophore GZP1. Its chemical structure of was characterized by mass spectrum, nuclear magnetic resonance spectroscopy and ultraviolet-visible absorption spectrum. Cu2+ ions were recognized via fluorescence spectra. Chromophore GZP1 showed specific detection ability of Cu2+. 14 other metal ions were used as reference. The detection limit was estimated to be 0.06 μmol/dm3 in aqueous solution, which was significantly lower than the typical concentration of blood Cu2+ in normal individuals and the limit of copper(II) in drinking water.
Źródło:
Environment Protection Engineering; 2017, 43, 4; 67-72
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przyspieszone badania degradacji przy stałym naprężeniu w analizie diod superelektroluminescencyjnych i wrażliwości parametrycznej
Constant stress adt for superluminescent diode and parameter sensitivity analysis
Autorzy:
Li, X.
Jiang, T.
Sun, F.
Ma, J.
Powiązania:
https://bibliotekanauki.pl/articles/301041.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
analiza wrażliwościowa
ruchy Browna
obniżenie charakterystyk
badania przyspieszone
SLD
sensitivity analysis
Brownian motion
performance degradation
accelerated testing
Opis:
Ruchy Browna są jednym z najpotężniejszych procesów stochastycznych w ciągłym czasie i ciągłej przestrzeni, który ma też mocne podstawy fi zyczne. W analizie przyspieszonych badań degradacji (ADT), rozkład odwrotny gaussowski, będący rozkładem czasu pierwszego przejścia ruchu Browna z dryfem (drift Brownian motion), staje się bardzo popularnym modelem predykcji statystycznej życia i niezawodności produktów. Diody superelektroluminescencyjne (SLD) o długiej żywotności i wysokiej niezawodności mają wiele zalet fi zycznych, które sprawiają, że zastępują one diody laserowe (LD) oraz diody elektroluminescencyjne (świecące) (LED) i mają szerokie zastosowanie w czujnikach światłowodowych. W niniejszym artykule przeprowadzono badania ADT diody SLD przy stałym naprężeniu. Aby ocenić możliwość zastosowania rozkładu odwrotnego gaussowskiego do badań diod SLD, określono najpierw trwałość i niezawodność SLD na podstawie danych o spadku mocy optycznej uzyskanych z badania ADT prowadzonego przy stałym naprężeniu. Następnie przeprowadzono analizy wrażliwości parametrycznej w trzech wymiarach: niezawodności, czasu życia i parametru analitycznego. Wreszcie, kierując się wynikami analizy wrażliwościowej, przedstawiono niektóre zasady planowania i przeprowadzania testów ADT przy stałym naprężeniu.
Brownian motion is one of the most powerful stochastic processes in continuous time and continuous space and has a good physics background. For the analysis of accelerated degradation testing (ADT), the inverse Gaussian (IG) distribution, which is the fi rst passage time distribution of the drift Brownian motion (DBM), becomes a very popular statistical prediction model of product life and reliability. Instead of laser diode (LD) and Light Emitting Diode (LED), long-life and high-reliability super-luminescent diode (SLD) has many physical advantages and has been widely used in optical fi ber sensors. In this paper, the constant stress ADT (CSADT) of SLD was conducted. In order to evaluate the applicability of IG distribution to SLD, we fi rst estimate the life and reliability of SLD based on the optical power degradation data collected in CSADT. Then parameter sensitivity analyses are conducted in the 3-dimensions of reliability, lifetime and the analytic parameter. Finally, according to the sensitive analysis results, some CASDT planning and testing principles are presented.
Źródło:
Eksploatacja i Niezawodność; 2010, 2; 21-26
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Renewable warranty policy for multiple-failure-mode product considering different maintenance options
Polityka odnawiania gwarancji dla produktówo mnogich przyczynach uszkodzeń uwzględniająca różne opcje obsługi
Autorzy:
Li, X.
Jia, Y.
Wang, P.
Zhao, J.
Powiązania:
https://bibliotekanauki.pl/articles/301949.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
multiple failure modes
renewing warranty
preventive maintenance
warranty cost
product availability
upgrading maintenance
mnogie przyczyny uszkodzeń
odnowienie gwarancji
obsługa profilaktyczna
koszty gwarancji
gotowość produktu
konserwacja modernizacyjna
Opis:
Along with the advancement of manufacturing techniques, the quality of the spares for product is likely to be improved during the warranty period. There can be two types of spares, i.e. low-quality spares and high-quality spares for replacement maintenance. And the manufacturers (customers) may have to decide whether or not to provide (buy) the warranty considering upgrading maintenance. This paper presents a renewing warranty policy considering three maintenance options for products with multiple failure modes. The cost and availability models of these maintenance options are proposed. Of these options, upgrading maintenance is taken into account with the assumption that the warrantied item will be upgraded one time during the warranty cycle. After upgrading maintenance, the high-quality spares are used to replace the failed item. By minimizing the ratio between cost and availability of the product, the optimal upgrading opportunity is obtained. In the numerical example, the results of these options are presented. Monte Carlo simulation results are compared with the analytical results to demonstrate the correctness and efficiency of the proposed models considering upgrading maintenance. The renewing warranty policy considering upgrading maintenance policy is compared with the one without considering upgrading maintenance. The results show that the former is better than the latter in some cases. The sensitivity of the cost model and availability model to different parameters is analyzed at last.
Wraz z postępem techniki produkcji, wzrasta prawdopodobieństwo, że jakość części zamiennych do produktu ulegnie poprawie w przeciągu okresu gwarancyjnego. Istnieją dwa rodzaje części zamiennych: części zamienne niskiej i wysokiej jakości. Producenci (klienci) mogą być zmuszeni podjąć decyzję czy objąć produkt gwarancją (wykupić gwarancję) zapewniającą konserwację modernizacyjną. W artykule przedstawiono politykę odnawiania gwarancji z uwzględnieniem trzech różnych opcji obsługi produktów narażonych na mnogie przyczyny uszkodzeń. Zaproponowano modele kosztów i gotowości dla omawianych opcji obsługi. Spośród badanych opcji, do dalszej analizy wybrano konserwację modernizacyjną zakładającą, że element podlegający gwarancji zostanie poddany jednokrotnej modernizacji podczas cyklu gwarancyjnego. Po wykonaniu konserwacji modernizacyjnej, uszkodzony element zastępuje się częściami zamiennymi wysokiej jakości. Minimalizując stosunek kosztów do gotowości produktu, uzyskuje się optymalną możliwość modernizacji Przykład numeryczny przedstawia wyniki uzyskane dla omawianych opcji. Wyniki symulacji Monte Carlo porównano z wynikami analitycznymi w celu wykazania prawidłowości i efektywności proponowanych modeli uwzględniających konserwację modernizacyjną. Politykę odnawiania gwarancji uwzględniającą konserwację modernizacyjną porównano z polityką, która takiej konserwacji nie uwzględnia. Wyniki pokazują, że pierwsza z tych opcji jest w niektórych przypadkach korzystniejsza od drugiej. Badania wieńczy analiza czułości modelu kosztów i modelu gotowości na różne parametry.
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 4; 551-560
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design and Simulation of Jacquard Warp-knitted Towel Fabric
Projektowanie i symulacja żakardowej ręcznikowej dzianiny osnowowej
Autorzy:
Cong, H.
Li, X.
Zhang, A.
Gao, Z.
Powiązania:
https://bibliotekanauki.pl/articles/231894.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
warp knitting
towel
jacquard
model
design
simulation
ręczna symulacja żakardowa
struktura dzianiny
projektowanie CAD
Opis:
This article proposes a method for designing and simulating jacquard warp-knitted towel fabric. Artistic conception drawing was used in realising the CAD design function of jacquard warp-knitted towel fabric based on the fabric structure and knitting principle. This study applied NURBS curves and the surface principle to build a three-dimensional solid model of the terry loop. Then using microscope type measurement instruments, the terry loop forms of the fabric surface were analysed and models of different forms of terry loop on the fabric surface built. With visual C++ for development tools combined with OpenGL graphics libraries, a CAD design and simulation function of jacquard warp-knitted towel fabric were finally realized within the CAD system.
W artykule zaproponowano metodę projektowania i symulacji żakardowej ręcznikowej dzianiny osnowowej. Artystyczną koncepcję uwidocznioną na rysunku wykorzystano przy realizacji funkcji projektowania CAD w oparciu o strukturę dzianiny i zasady dziania. W analizie wykorzystano krzywe NURBS i charakterystykę powierzchni dla konstrukcji trójwymiarowych brył modelu pętli frotte. Następnie za pomocą pomiarów mikroskopowych analizowano pętle frotte utworzone na powierzchni dzianiny i stworzono modele różnych form tych pętli. Wykorzystując wizualizacje C++ w kombinacji z programem graficznym OpenGL zaprojektowano przy pomocy CAD wzory i symulacje funkcji żakardowej dzianiny osnowowej.
Źródło:
Fibres & Textiles in Eastern Europe; 2014, 5 (107); 54-58
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel method of handling tolerances for analog circuit fault diagnosis based on normal quotient distribution
Autorzy:
Ao, Y.
Shi, Y.
Zhang, W.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/221119.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
soft-fault diagnosis
analog circuit
Normal Quotient Distribution
Slope Fault Model
Opis:
While the Slope Fault Model method can solve the soft-fault diagnosis problem in linear analog circuit effectively, the challenging tolerance problem is still unsolved. In this paper, a proposed Normal Quotient Distribution approach was combined with the Slope Fault Model to handle the tolerances problem in soft-fault diagnosis for analog circuit. Firstly, the principle of the Slope Fault Model is presented, and the huge computation of traditional Slope Fault Characteristic set was reduced greatly by the elimination of superfluous features. Several typical tolerance handling methods on the ground of the Slope Fault Model were compared. Then, the approximating distribution function of the Slope Fault Characteristic was deduced and sufficient conditions were given to improve the approximation accuracy. The monotonous and continuous mapping between Normal Quotient Distribution and standard normal distribution was proved. Thus the estimation formulas about the ranges of the Slope Fault Characteristic were deduced. After that, a new test-nodes selection algorithm based on the reduced Slope Fault Characteristic ranges set was designed. Finally, two numerical experiments were done to illustrate the proposed approach and demonstrate its effectiveness.
Źródło:
Metrology and Measurement Systems; 2012, 19, 4; 817-830
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Safety problem of cavity under open pit bench
Zagadnienie bezpieczeństwa zapadlisk pod warstwą wybierania w kopalni odkrywkowej
Autorzy:
Liu, X.
Li, X.
Gong, F.
Liu, K.
Powiązania:
https://bibliotekanauki.pl/articles/219373.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cavity
open pit
laser scanning
stability analysis
acoustic emission monitoring
pustki
kopalnie odkrywkowe
skanowanie laserowe
analiza stabilności
monitorowanie emisji akustycznej
Opis:
Some open pits in China are severely threatened by hidden cavities under benches which are always inaccessible and unmapped. The first thing to be well considered is safe and precise cavity detection, as the conventional detection methods cannot output a clear cavity vision, a three-dimensional laser measurement system is employed to perform detection, which is deployed from the surface through boreholes. The results from the scanner demonstrated very well the detailed level of information that can be collected In a cavity using this method, with the cavities’ layout under various benches being fully mapped. As detected cavities are always in horizontal and vaulted roof shape, two different theoretical calculation methods are proposed to analyze the cap rock stability for different roof shape. And also, the three-dimensional solid model generated through scanned laser data is used for stability numerical simulation by converting the data format into the one that recognized in corresponding software. Furthermore, acoustic emission technique is adopted to carry out long term real time rupture monitoring in cap rock, and four kinds of typical monitoring results are discussed which represent the rupture behavior in cap rock of unstable cavity, stable cavity, cavity with large working drill above and cavity beside explosion site. Thus, a complete safety evaluation system for such cavity will be established to ensure safe operation above.
W wielu kopalniach odkrywkowych na terenie Chin powstało zagrożenie wskutek istnienia ukrytych pustek pod warstwami wybierania (ławami), część z nich jest trudno dostępna, a niektóre nie są nawet naniesione na mapach. Najważniejszą kwestią jest więc bezpieczna i dokładna lokalizacja pustek. Ponieważ konwencjonalne metody wykrywania nie są w stanie ujawnić dokładnego obrazu pustek, zastosowano trójwymiarowy laserowy system detekcji pustek, zakładany z powierzchni poprzez wywiercone otwory. Odczyty ze skanera ujawniły dokładne zarysy pustek. Z pomocą tej metody można dokładnie obrazować układy pustek pod warstwami wybierania (ławami). Ponieważ stropy w wykrywanych pustkach są zawsze poziome lub sklepione, zaproponowano dwie teoretyczne metody obliczania stabilność stropu dla różnych jego kształtów. Ponadto, na podstawie danych ze skanera wygenerowano model bryły trójwymiarowej, który wykorzystany został do numerycznych badań stabilności stropu poprzez przekształcenie formatu danych na format rozpoznawalny w zastosowanym oprogramowaniu. Zastosowano także techniki pomiary emisji akustycznej w długofalowym monitorowaniu spękań stropu w czasie rzeczywistym, przeanalizowano cztery rodzaje uzyskanych wyników opisujących zachowanie stropu w przypadku pustek niestabilnych, stabilnych, pustek ponad którymi wykonano otwory znacznych rozmiarów oraz pustek w pobliżu miejsc prowadzenia prac strzałowych. Opracowano w ten sposób pełny system oceny stabilności pustek zapewniający bezpieczne prowadzenie prac ponad nimi.
Źródło:
Archives of Mining Sciences; 2015, 60, 2; 565-580
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Characterization of HMX/Estane Nanocomposites
Autorzy:
Shi, X.
Wang, J.
Li, X.
An, Ch.
Powiązania:
https://bibliotekanauki.pl/articles/358274.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
HMX
Estane 5703
spray drying
nanocomposites
thermal stability
Opis:
A new insensitive explosive based on octahydro-1,3,5,7-tetranitro1,3,5,7-tetrazocine (HMX) was prepared by spray drying using Estane 5703 as a binder. Scanning electron microscopy was used to characterize the morphology and particle size of the HMX/Estane 5703 nanocomposites. The composites were analyzed by X-ray diffractometry and differential scanning calorimetry and their impact sensitivity was determined. For comparison, raw HMX was also tested using these three methods. The nanocomposite morphology was found to be microspherical (1 to 8 μm diameter) and composed of many tiny particles, 30 to 150 nm in size. The crystal type of the HMX/Estane 5703 nanocomposites was unchanged. The activation energy, self-ignition temperature and average drop height of the raw HMX were 515.66 kJ·mol-1, 278.63 °C and 18.4 cm, respectively. In comparison, the corresponding values for the HMX/Estane 5703 nanocomposites were 488.92 kJ·mol-1, 279.3 °C and 75.4 cm, respectively.
Źródło:
Central European Journal of Energetic Materials; 2014, 11, 3; 433-442
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of all-optical logic XOR gate based on linear optical amplifier cross-gain modulation
Autorzy:
Li, X
Jin, J
Li, H
Zhang, Q
Powiązania:
https://bibliotekanauki.pl/articles/174514.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
linear optical amplifier
cross-gain modulation
XOR gate
Opis:
All-optical logic is the key to future high speed and large capacity optical transmission, the realization of optical packet switching and optical computing, and it has a very profound influence on the development of future optical communication. A linear optical amplifier as a new type of semiconductor optical amplifier, which has a good gain characteristic, has better signal performance than a traditional semiconductor optical amplifier in the wavelength conversion. This article presents a numerical simulation model of all-optical logic XOR gate and its logic operation based on cross-gain modulation of linear optical amplifier, and has also completed some of the basic logic operations, including AND, OR, NOT operations.
Źródło:
Optica Applicata; 2015, 45, 4; 447-457
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Bayesian networks approach for event tree time-dependency analysis on phased-mission system
Oparte na sieciach bayesowskich podejście do analizy zależności czasowychw systemach o zadaniach okresowych wykorzystujące metodę drzewa zdarzeń
Autorzy:
Li, X.-T.
Tao, L.-M.
Jia, M.
Powiązania:
https://bibliotekanauki.pl/articles/301908.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
time-dependency
Bayesian networks
event tree
fault tree
phased-mission system
reliability
risk analysis
zależność czasowa
sieć bayesowska
drzewo błędów
system o zadaniach okresowych
niezawodność
analiza ryzyka
Opis:
Event tree/ fault tree (E/FT) method is the most recognized probabilistic risk assessment tool for complex large engineering systems, while its classical formalism most often only considers pivotal events (PEs) being independent or time-independent. However, the practical difficulty regarding phased-mission system (PMS) is that the PEs always modelled by fault trees (FTs) are explicit dependent caused by shared basic events, and phase-dependent when the time interval between PEs is not negligible. In this paper, we combine the Bayesian networks (BN) with the E/FT analysis to figure such types of PMS based on the conditional probability to give expression of the phase-dependency, and further expand it by the dynamic Bayesian networks (DBN) to cope with more complex time-dependency such as functional dependency and spares. Then, two detailed examples are used to demonstrate the application of the proposed approach in complex event tree time-dependency analysis.
Metoda drzewa zdarzeń/drzewa błędów jest najbardziej znanym narzędziem probabilistycznej oceny ryzyka w złożonych, dużych systemach inżynieryjnych; jednak jej klasyczny formalizm najczęściej uwzględnia jedynie niezależne lub niezależne od czasu zdarzenia kluczowe. Praktyczną trudnością występującą w systemach o zadaniach okresowych jest to, że zdarzenia kluczowe, które zazwyczaj przedstawiane są w modelach drzewa błędów jako powiązane zależnościami jawnymi, mającymi związek ze wspólnym zdarzeniem podstawowym, tutaj powiązane są zależnościami czasowymi, jako że przedział czasowy pomiędzy pojedynczymi zdarzeniami kluczowymi nie jest bez znaczenia. W niniejszej pracy, połączyliśmy metodologie sieci Bayesa i analizy drzewa zdarzeń/ błędów aby opisać za pomocą pojęcia prawdopodobieństwa warunkowego, zależności czasowe w systemach o zadaniach okresowych, a następnie rozwinęliśmy tę metodę, wykorzystując dynamiczne sieci Bayesa, które pozwalają na analizę bardziej złożonych zależności czasowych, takich jak zależności funkcjonalne i związane z użyciem części zamiennych. W końcowej części pracy przedstawiliśmy dwa szczegółowe przykłady zastosowania proponowanej metody do analizy złożonych zależności czasowych w drzewach zdarzeń.
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 2; 273-281
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Compatibility Study of 2,6-Diamino-3,5-dinitropyridine-1-oxide with Some Energetic Materials
Autorzy:
Li, X.
Wang, B.-L,
Lin, Q.-H.
Powiązania:
https://bibliotekanauki.pl/articles/358871.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
compatibility
energetic materials
ANPyO
Opis:
For the application of 2,6-diamino-3,5-dinitropyridine-1-oxide (ANPyO) in composite explosives, the compatibility of ANPyO with some energetic materials was studied by the use of differential scanning calorimetry (DSC), where the energetic materials were cyclotrimethylenetrinitramine (RDX), cyclotetramethylenetetranitramine (HMX), 3,4-dinitrofurazanfuroxan (DNTF), hexanitrohexazaisowurtzitane (CL-20), 2,4,6-trinitrotoluene (TNT), 2,4,6-triamino-1,3,5-trinitrobenzene (TATB), 3-nitro-1,2,4-triazol-5-one (NTO), 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105), 5-amino-1H-tetrazole nitrate (5-ATEZN), ammonium perchlorate (AP), potassium perchlorate (KP), aluminum powder (Al), boron powder (B), magnesium hydride (MgH2) and magnesium borohydride (Mg(BH4)2). The results showed that the binary systems of ANPyO/CL-20, ANPyO/NTO, ANPyO/5-ATEZN, ANPyO/Al, ANPyO/B, ANPyO/MgH2 and ANPyO/Mg(BH4)2 are compatible, and that the systems of ANPyO with RDX, LLM-105, HMX, AP and KP are sensitive, and with DNTF, TNT and TATB are incompatible.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 4; 978-988
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Forest in Karst Mountain sinkhole of southeastern China provides refugium for the preservation of bryophyte diversity
Autorzy:
Li, X.
Zhang, Z.
Wang, Z.
Shi, K.
Powiązania:
https://bibliotekanauki.pl/articles/2130582.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
negative landform
natural refuge
complex microenvironment
karst rocky
desertification
Opis:
The negative landform of sinkholes provides belowground level refugia for a high diversity of forest species compared to the forests on the surface of surrounding karst plateaus in southeastern China. Bryophyte diversity in sinkhole forests is also likely to be high. In this study, bryophytes of an underground forest sinkhole (UFS), and two forests (Forest Karst Mountain 1; FKM1) and (Forest Karst Mountain 2; FKM2) on the surface of the karst plateau were compared to understand the role of the sinkhole forest in the conservation of bryophyte diversity and the relationships between bryophyte diversity, environmental factors, and soil nutrients. Significantly more bryophyte taxa were recorded from the sinkhole forest (71 taxa, 36 genera, 23 families) than those in the forest on the plateau surface, which was the closest to the sinkhole (FKM1; 29 bryophyte taxa, 16 genera, 12 families), and even fewer bryophytes were found in the forest more distant to the sinkhole (FKM2; 22 taxa, 17 genera, eight families). Twenty-four liverwort taxa were collected from the sinkhole forest, two from the closest surface forest (FKM1) and none from the furthest surface forest (FKM2). Ninety-three percent of the bryophytes in karst mountain sinkhole were not found on surface forest. The diversity index trend was as follows: UFS > FKM1 > FKM2, and the evenness index trend was in the opposite direction as follows: UFS < FKM1 < FKM2. The beta diversity showed that the Jaccard index among the three forests was 0–0.25, reflecting a huge difference between the sinkhole forest and the two surface forests. Canonical correspondence analysis showed that light was the most important factor affecting the distribution of bryophytes in the sinkhole forest, while temperature and humidity were key factors for the distribution of bryophytes in the two surface forests. Further, soil parameters, namely, soil organic carbon, total nitrogen, total phosphorus, total potassium, alkali- hydrolyzed nitrogen, and available phosphorus changed gradually from UFS to FKM1 and to FKM2. The sinkhole forest, located in a landform with the unique negative topography enclosed by cliffs, and with a complex microenvironment, provides a natural refuge for bryophyte species in areas where forests have been negatively impacted by karst rocky desertification.
Źródło:
Acta Societatis Botanicorum Poloniae; 2020, 89, 4
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of surface functional groups of nanosilica on the properties of polyamide 6/SiO2 nanocomposite
Autorzy:
Xu, Q.
Chen, F.
Li, X.
Zhang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/779538.pdf
Data publikacji:
2013
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
nanosilica
polyamide 6
nanocomposite
in situ polymerization
Opis:
The present study investigated the effect of the surface functional groups of nanosilica on the interfacial, crystallization, and thermal stability of polyamide 6/SiO2 (PA6/SiO2) nanocomposite, in which nanosilica was modified in situ with both 3-triethoxysilylpropylamine and 3-methacryloxypropyltrimethoxy silane¬ (KH-550 and KH-570). The FTIR analysis results showed the chemical bonding action between the reacting amino groups of nanosilica and end carboxyl groups of polyamide 6 enhanced with increasing the ratio of KH-550 and KH-570. The XRD spectrum indicated that the crystal structure of PA6/SiO2 nanocomposites tended to form α crystal type that was beneficial to an improvement of mechanical properties, and which was in agreement with the results of mechanical strength measurements. It was also found that crystallization temperature and crystallization rate of PA6/SiO2 nanocomposites were lower than that of neat polyamide 6.
Źródło:
Polish Journal of Chemical Technology; 2013, 15, 3; 20-24
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kalman filter based method for fault diagnosis of analog circuits
Autorzy:
Li, X.
Xie, Y.
Bi, D.
Ao, Y.
Powiązania:
https://bibliotekanauki.pl/articles/221517.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
analog fault diagnosis
signature extraction
Kalman filter
Shannon entropy
Opis:
This paper presents a Kalman filter based method for diagnosing both parametric and catastrophic faults in analog circuits. Two major innovations are presented, i.e., the Kalman filter based technique, which can significantly improve the efficiency of diagnosing a fault through an iterative structure, and the Shannon entropy to mitigate the influence of component tolerance. Both these concepts help to achieve higher performance and lower testing cost while maintaining the circuit.s functionality. Our simulations demonstrate that using the Kalman filter based technique leads to good results of fault detection and fault location of analog circuits. Meanwhile, the parasitics, as a result of enhancing accessibility by adding test points, are reduced to minimum, that is, the data used for diagnosis is directly obtained from the system primary output pins in our method. The simulations also show that decision boundaries among faulty circuits have small variations over a wide range of noise-immunity requirements. In addition, experimental results show that the proposed method is superior to the test method based on the subband decomposition combined with coherence function, arisen recently.
Źródło:
Metrology and Measurement Systems; 2013, 20, 2; 307-322
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Gradient flow optimization for reducing blocking effects of transform coding
Autorzy:
Gao, F.
Li, X.
Wang, X.
Wee, W. G.
Powiązania:
https://bibliotekanauki.pl/articles/907251.pdf
Data publikacji:
2004
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
przepływ gradientu
efekt blokowania
kodowanie transformatowe
gradient flow
blocking effects
optimization
transform coding
Opis:
This paper addresses the problem of reducing blocking effects in transform coding. A novel optimization approach using the gradient flow is proposed. Using some properties of the gradient flow on a manifold, an optimized filter design method for reducing the blocking effects is presented. Based on this method, an image reconstruction algorithm is derived. The algorithm maintains the fidelity of images while reducing the blocking effects. Experimental tests demonstrate that the presented algorithm is effective.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2004, 14, 1; 105-111
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Four stage hybrid constructed wetlands treating low-strength aquaculture wastewater with and without artificial aeration
Autorzy:
Zhang, S.-Y.
Li, G.
Li, X.
Tao, L.
Powiązania:
https://bibliotekanauki.pl/articles/207748.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
wastewater treatment
aquaculture
water pollution
wetlands
aquaculture wastewater
artificial aeration
oczyszczanie ścieków
akwakultura
zanieczyszczenie wody
mokradła
sztuczne napowietrzanie
tereny podmokłe
Opis:
Driven by the booming demands for healthy food, aquaculture industry has to deal with the problem of water pollution appropriately so as to achieve sustainable development. In this study, a combination of four stage CWs (three horizontal subsurface flows followed by one free water surface flow) was configured to treat low-strength aquaculture wastewater. For performance assessment, the wetlands were monitored over three years, during which artificial aeration was added to them. By the results, the organic matters and nutrients were mainly sequestered in the anterior subsurface flows, while the surface flow mainly contributed to DO improvement. These results probably implied no necessity of excessive subsurface flows connected in a staged manner. In addition, the artificial aeration improved the treatment performance on ammonium-N, TN and TP in the first-stage CW.
Źródło:
Environment Protection Engineering; 2015, 41, 3; 31-42
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surfactant assisted removal of engine oil from synthetic soil
Autorzy:
Ramamurthy, A. S.
Chen, Z.
Li, X.
Azmal, M.
Powiązania:
https://bibliotekanauki.pl/articles/207953.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
sodium dodecyl sulfate
SDS
desorption
polyethylene oxides
sodium
sodium sulfate
soils
surface active agents
dodecylosiarczan sodu
surfaktanty anionowe
desorpcja
tlenki polietylenu
sód
siarczan sodowy
gleba
środki powierzchniowo czynne
detergenty
Opis:
Effectiveness of surfactants SDS (sodium dodecyl sulfate), AOT (sodium dioctyl sulfosuccinate) and Brij 35 (polyoxyethylene lauryl ether) in removing residual oil from soils have been determined. Experimental results indicated that oil desorption efficiencies with surfactants are 7 to 18 times higher than using water alone. 0.6% Brij 35 at was the most effective surfactant to remove oil from soil, and it did not display any significant change in oil desorption with pH changes. A comparison study also showed that pore volume was a more significant parameter than soil washing flow rate to improve oil desorption.
Źródło:
Environment Protection Engineering; 2015, 41, 2; 67-79
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prognozowanie uszkodzeń przekładni mostu napędowego z wykorzystaniem wstępnego przetwarzania sygnału drgań w połączeniu z sieciami neuronowymi typu RBF
Rear axle gear damage prediction using vibration signal preprocessing coupled with RBF neural networks
Autorzy:
Shao, Y.
Li, X.
Mechefske, Ch. K.
Chen, Z.
Powiązania:
https://bibliotekanauki.pl/articles/301429.pdf
Data publikacji:
2009
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
uszkodzenie
predykcja
sygnały drganiowe
sieć neuronowa typu RBF
damage
prediction
vibration signals
RBF neural network
Opis:
Przekładnia mostu pędnego stanowi kluczową część samochodowego układu przeniesienia napędu, a trafne przewidywanie uszkodzeń jest istotne dla bezpiecznego użytkowania samochodu. Jednakże precyzja przewidywania uszkodzenia przekładni jest obecnie niska ze względu na zmienne prędkości obrotowe i zmieniające się obciążenia występujące podczas używania pojazdu. W celu zredukowania zmienności drgań i zwiększenia trafności przewidywania trwałości resztkowej przekładni, w artykule zaproponowano nową metodę predykcyjną, która łączy sieć neuronową o radialnych funkcjach bazowych (RBF) i rekurencyjne przetwarzanie wstępne. Metoda rekurencyjnego przetwarzania wstępnego zmniejsza wpływ zmienności chwilowego obciążenia i prędkości na charakterystyczne parametry uzyskane z sygnałów drganiowych. Sieć neuronowa typu RBF modeluje nieliniowe charakterystyki przenoszenia napędu przez przekładnię mostu pędnego. Sieć taka charakteryzuje się zachowaniem samoadaptacyjnym i szybką zbieżnością. Wyniki badań symulacyjnych i eksperymentalnych pokazują, że ta nowa metoda może pozwolić na udoskonalenie tradycyjnych metod predykcyjnych oraz osiąganie wysokiej precyzji w przewidywaniu uszkodzeń przekładni mostu pędnego.
The rear axle gear is a key part of the automobile transmission system and accurate damage prediction is important for car safety. However, the precision of gear damage prediction is currently low because of the varying rotating speeds and the changing loads when a truck is in use. In order to reduce the fluctuation of vibrations and enhance the predicting accuracy of gear residual life, a new predictive method, which combines the Radial Basis Function (RBF) neural network with recursive preprocessing is proposed in this paper. The recursive preprocessing method reduces the effects of instantaneous load and speed fluctuations on the characteristic parameters extracted from vibration signals. The RBF neural network models the non-linear characteristics of the rear axle gear transmission. The RBF neural network is characterized by its self-adaptive behavior and its rapid convergence. The simulated and experimental results have shown that this new method can enhance traditional prediction methods and obtain high precision for the damage prediction of rear axle gears.
Źródło:
Eksploatacja i Niezawodność; 2009, 4; 57-64
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Jiyuan tetrapod fauna of the Upper Permian of China: new pareiasaur material and the reestablishment of Honania complicidentata
Autorzy:
Xu, L.
Li, X.-W.
Jia, S.-H.
Liu, J.
Powiązania:
https://bibliotekanauki.pl/articles/22012.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Opis:
Honania complicidentata and Tsiyuania simplicidentata are pareiasaur taxa based on material from the Shangshihezi Formation of Jiyuan, Henan Province, China that were earlier designated as nomina vana. Based on the study of new material, and the reexamination of old specimens, we determine that the pareiasaur material from Jiyuan represents a single species that differs from all known species from other localities. Thus, we resurrect the name H. complicidentata for the material from Jiyuan. H. complicidentata is characterized by maxillary teeth with high crowns, dentary teeth slightly posteriorly inclined compared to the dentary dorsal margin, nearly all preserved marginal teeth have a cusped cingulum on the lingual surface, and humerus without an ectepicondylar foramen. Phylogenetic analysis shows Honania is more basal than Shansisaurus and Shihtienfenia from the Sunjiagou Formation of China.
Źródło:
Acta Palaeontologica Polonica; 2015, 60, 3
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Soil texture distribution simulation and risk assessment using transition probability-based geostatistics
Autorzy:
Li, X.
Liu, J.
Zhang, J.
Wang, W.
Xin, W.
Powiązania:
https://bibliotekanauki.pl/articles/24270.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
soil texture
conditional simulation
risk assessment
transition probability
geostatistics
Opis:
Three dimensional soil textural structure in a township was conditionally simulated using a transition pro- bability-based indicator geostatistical method based on 270 soil texture samples from 27 profiles. Additionally the distribution of soil profiles lacking clay interlayers (indicating high irrigation water and nutrient leaching risk) was analyzed using 500 realizations from the simulation. The results indicated that the simulation could predict the soil texture distribution with low uncertainties using the existing data, and the predicted soil map (0-10 cm) formed by the maximum probable soil textures also exhibited a good agreement with the legacy soil survey map. For water and nutrient leaching risk analysis, the areas lacking clay interlayer could be located; however, their distribution was still highly uncertain if based only on the existing sampling data. That means supplementary sampling in future is required for the risk assessment, and the existing study can help to optimise the sampling points and their distribution. Generally, the transition probability-based geostatistical simulation, as a stochastic conditional simulation method, exhibited its potential in soil texture spatial reproduction and related risk assessment.
Źródło:
International Agrophysics; 2014, 28, 4
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of quinoline from aqueous solutions by lignite, coking coal and anthracite. Adsorption isotherms and thermodynamics
Autorzy:
Xu, H.
Huagn, G.
Li, X.
Gao, L.
Wang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/110016.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
quinoline adsorption
coking coal
adsorption isotherms
thermodynamics
Opis:
Based on the concept of circular economy, a novel method of industrial organic wastewater treatment by using adsorption on coal is introduced. Coal is used to adsorb organic pollutants from coking wastewaters. After adsorption, the coal would be used for its original purpose, its value is not reduced and the pollutant is thus recycled. Through systemic circulation of coking wastewater zero emissions can be achieved. Lignite, coking coal and anthracite were used as adsorbents in batch experiments. The quinoline removal efficiency of coal adsorption was investigated. The coking coal and anthracite exhibited properties well-suited for adsorption onto both adsorbents. The experimental data were fitted to Langmuir and Freundlich isotherms as well as Temkin, Redlich–Peterson (R-P) and Dubinin-Radushkevich (D-R) models. Both Freundlich Isotherm and D-R model provided reasonable models of the adsorption process. The thermodynamic parameters of quinoline adsorption on coking coal were calculated. The thermodynamic parameters indicated that the adsorption process is exothermic and is a physical adsorption. The △S° value indicated that the adsorption entropy decreased because the adsorbate molecule was under restrictions after it adsorption on the coal surface. The coal adsorption method for removing refractory organic pollutants is a great hope for achieving zero emission waste water for a coking plant.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 214-227
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of landing mat composition on ankle injury risk during a gymnastic landing: a biomechanical quantification
Autorzy:
Xiao, X.
Xiao, W.
Li, X.
Wan, B.
Shan, G.
Powiązania:
https://bibliotekanauki.pl/articles/306922.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
symulacja komputerowa
właściwości mechaniczne
sztywność
tarcie
computer simulation
impact load
mechanical properties of floor mats
stiffness
dampness
friction
Opis:
Purpose: About 70% injury of gymnasts happened during landing – an interaction between gymnast and landing mat. The most injured joint is the ankle. The current study examined the effect of mechanical properties of landing mat on ankle loading with aims to identify means of decreasing the risk of ankle injury. Method: Gymnastic skill – salto backward stretched with 3/2 twist was captured by two high-speed camcorders and digitized by using SIMI-Motion software. A subject-specific, 14-segment rigid-body model and a mechanical landing-mat model were built using BRG.LifeMODTM. The landings were simulated with varied landing-mat mechanical properties (i.e., stiffness, dampness and friction coefficients). Result: Real landing performance could be accurately reproduced by the model. The simulations revealed that the ankle angle was relatively sensitive to stiffness and dampness of the landing mat, the ankle loading rate increased 26% when the stiffness was increased by 30%, and the changing of dampness had notable effect on horizontal ground reaction force and foot velocity. Further, the peak joint-reaction force and joint torque were more sensitive to friction than to stiffness and dampness of landing mat. Finally, ankle muscles would dissipate about twice energy (189%) when the friction was increased by 30%. Conclusion: Loads to ankles during landing would increase as the stiffness and dampness of the landing mat increase. Yet, increasing friction would cause a substantial rise of the ankle internal loads. As such, the friction should be a key factor influencing the risk of injury. Unfortunately, this key factor has rarely attracted attention in practice.
Źródło:
Acta of Bioengineering and Biomechanics; 2017, 19, 1; 105-113
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation on biomass performance of a submerged membrane bioreactor for treating soy sauce wastewater
Autorzy:
Lv, S.
Liang, Z.
Li, X.
Fan, H.
Zen, Y.
Powiązania:
https://bibliotekanauki.pl/articles/206949.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
discharge limit
membrane bioreactor (MBR)
mixed liquor suspended solids
polishing steps
pollutants removal
submerged membrane bioreactors
treated wastewate
retencja osadu
bioreaktor membranowy MBR
koagulacja
etapy polerowania
Opis:
A pilot study for investigating a membrane bioreactor (MBR) performance in treating soy sauce wastewater was divided into three stages. At stage 1, the MBR was operated without excess sludge withdrawal, and pollutants removal increased gradually and entered into a pseudo-stable phase eventually along with increasing mixed liquor suspended solid (MLSS). At stage 2, the growth of biomass and removal of pollutants were obviously decreased by lowering temperature. At stage 3, membrane permeate flux and sludge yield under various MLSSs were studied. Additional polishing steps including coagulation and oxidation were validated to be effective to ensure the treated wastewater to meet the discharge limits.
Źródło:
Environment Protection Engineering; 2016, 42, 1; 135-148
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Insensitive Booster Explosive: DAAF Surface-coated with Viton A
Autorzy:
Li, X.
Wu, B.
Liu, S.
An, C.
Wang, J.
Powiązania:
https://bibliotekanauki.pl/articles/358841.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
DAAF
refinement
surface-coated
thermal analysis
impact sensitivity
Opis:
3,3’-Diamino-4,4’-azoxyfurazan (DAAF) is the principal component of an insensitive booster explosive; refined DAAF and DAAF surface-coated with Viton A were prepared. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and differential scanning calorimetry (DSC) were employed to characterize the morphology, composition, and thermal decomposition of these samples. The impact sensitivity and theoretical detonation velocity of DAAF-based composites were also measured and analyzed. The results showed that DAAF surface-coated with Viton A was successfully obtained, and the impact sensitivity of DAAF/Viton A composites was much lower than that of crude DAAF. In addition, DAAF/Viton A composites exhibited better thermal stability compared to crude DAAF and refined DAAF. The theoretical detonation velocity of DAAF/Viton A composites and TATB/Viton A composites are roughly the same. Therefore, there is still great potential for DAAF to be used as the main explosive component of a booster explosive.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 3; 445-455
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Non-isothermal Decomposition Kinetics of 1-Amino-1,2,3-triazolium Nitrate
Autorzy:
Du, X.-J.
Zou, M.-S.
Li, X.-D.
Yang, R.-J.
Powiązania:
https://bibliotekanauki.pl/articles/358020.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
1-amino-1,2,3-triazolium nitrate
thermal decomposition
TG
non-isothermal kinetics
compensating effect
Opis:
The thermal decomposition kinetics of 1-amino-1,2,3-triazolium nitrate (ATZ-NO3) was investigated by non-isothermal TG-DTG at various heating rates (2, 5, 10, 15, and 20 °C∙min-1). The results showed that the thermal decomposition of ATZ-NO3 consists of two mass-loss stages. The first mass-loss stage corresponds to the loss of nitrate anion and the substituent group, while the second stage corresponds to the splitting of the triazole ring. The kinetic triplets of the two stages were described by a three-step method. Firstly, the Kissinger and Ozawa methods were used to calculate the apparent activation energies (E) and pre-exponential factors (A) of the two decomposition stages. Secondly, two calculation methods (the Šatava-Šesták and Achar methods) were used to obtain several probable decomposition mechanism functions. Thirdly, three assessment methods (the Šatava, double-extrapolation, and the Popescu methods) were used to confirm the most probable decomposition mechanism functions. The reaction models for both stages are random-into-nuclear and random-growth mechanisms, with n = 3/2 for the first stage and n = 1/3, m = 3 for the second stage. The kinetic equations for the two decomposition stages of ATZ-NO3 may be expressed as [wzór]. Mathematical expressions for the kinetic compensation effect were derived.
Źródło:
Central European Journal of Energetic Materials; 2014, 11, 1; 99-114
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Process Optimization and Characterization of an HMX/Viton Nanocomposite
Autorzy:
Shi, X.
Wang, C.
Wang, J.
Li, X.
An, C.
Ji, W.
Powiązania:
https://bibliotekanauki.pl/articles/358667.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
HMX
spray drying
processing parameters
optimization
impact sensitivity
nanoparticles
Opis:
HMX/Viton A nanocomposites were prepared by a spray drying process using different processing parameters, which included the dry gas inlet temperature, the air flow rate, and the solution feed flow rate. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were used to characterize the nanocomposites. The effects of the processing parameters on the morphology of the samples were investigated and are discussed. The thermal decomposition behaviour and impact sensitivity of the raw HMX and HMX/Viton A nanocomposites were also measured and compared. Optimal morphology and dispersion of the coated samples was achieved when the dry gas inlet temperature and the air and solution feed flow rates were 55 °C, 660 L/h and 1.5 mL/min, respectively. Under these optimal processing conditions, the nanocomposites were spherical in shape, ranged from 0.2-2 μm in size, and were composed of many tiny particles of 50-100 nm in size. The crystal phase of the nanocomposites was the same as that of raw HMX. Compared with those of raw HMX, the melting point and impact sensitivity of the nanocomposites were lower and the thermal decomposition rate was slightly higher.
Źródło:
Central European Journal of Energetic Materials; 2015, 12, 3; 487-495
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of gas holdup on the efficiency of cyclonic-static microbubble flotation column for oily wastewater treatment
Autorzy:
Ning, K.
Huang, G.
Xu, H.
Wu, L.
Li, X.
Wang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/208139.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
bubble columns
efficiency
flotation
wastewater treatment
oil water separation
kolumna flotacyjna
efektywność
flotacja
oczyszczanie ścieków
separacja wody
Opis:
A cyclonic-static microbubble flotation column of a novel construction was used in oil-water separation fields and has high efficiency for oil-water separation. The gas holdup is a key parameter for the evaluation of the performance of a flotation column. The gas holdup, closely related to the bubble size, bubble velocity and superficial gas velocity, is one of the most important parameters characterizing the hydrodynamics of a bubble column. The effect of gas holdup in a cyclonic-static microbubble flotation column was investigated. In addition, several operating parameters such as the circulating pressure, superficial gas velocity, and frother consumption were also investigated. The gas holdup was positively correlated to the superficial gas velocity. The gas holdup of clean water and oil wastewater increased along with the increase of the frother consumption. The separation mechanism of cyclonic-static microbubble flotation column was analyzed.
Źródło:
Environment Protection Engineering; 2018, 44, 2; 5-17
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the photosynthetic pathway on the hydrogen isotopic profile of glucose
Autorzy:
Zhang, B.
Billault, I.
Li, X.
Mabon, F.
Remaud, G.
Martin, M.
Powiązania:
https://bibliotekanauki.pl/articles/146974.pdf
Data publikacji:
2002
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
deuterium
glucose
isotope ratio
plant metabolism
SNIF-NMR
Opis:
The SNIF-NMR method (site-specific natural isotope fractionation studied by Nuclear Magnetic Resonance) was used to examine the isotopic profile of glucoses derived from plants with different photosynthetic pathways. It is shown that the type of photosynthetic metabolism, either C3 (beet-root, orange, grape), C4 (maize, sugar-cane) or CAM (pineapple), exerts a strong influence on the deuterium distribution in the sugar molecules. The isotopic profile also depends, secondarily, on the physiological status of the precursor plant. Consequently, the isotopic fingerprint of glucose may be a rich source of information in mechanistic comparisons of metabolic pathways. Moreover, from an analytical point of view, it may provide complementary criteria with respect to the ethanol probe for origin inference of sugars.
Źródło:
Nukleonika; 2002, 47,suppl.1; 63-65
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Large deformation and stability analysis of a cylindrical rubber tube under internal pressure
Autorzy:
Sang, J.
Xing, S.
Liu, H.
Li, X.
Wang, J.
Lv, Y.
Powiązania:
https://bibliotekanauki.pl/articles/279927.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
large deformation analysis
stability analysis
rubber tube
nonlinear elastic theory
Opis:
Rubber tubes under pressure can undergo large deformations and exhibit a particular nonlinear elastic behavior. In order to reveal mechanical properties of rubber tubes subjected to internal pressure, large deformation analysis and stability analysis have been proposed in this paper by utilizing a modified Gent’s strain energy function. Based on the nonlinear elastic theory, by establishing the theoretical model of a rubber tube under internal pressure, the relationship between the internal pressure and circumferential principal stretch has been deduced. Meanwhile stability analysis of the rubber tube has also been proposed and the relationship between the internal pressure and the internal volume ratio has been achieved. The effects on the deformation by different parameters and the failure reasons of the rubber tube have been discussed, which provided a reasonable reference for the design of rubber tubes.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 1; 177-188
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Antioxidant activity and mechanism in flower of Hylocereus undatus (Haw.) Britt. et Rose
Autorzy:
Li, X.
Gao, Y.
Han, W.
Lin, J.
Hu, Q.
Chen, D.
Powiązania:
https://bibliotekanauki.pl/articles/19838.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
Hylocereus undatus flower is commonly used as food or for medicinal purposes in south China. To study its antioxidant activity and mechanism we used antioxidant and chemical assays to compare two commercial samples from different locations (Shenjing, Qixing). The difference in antioxidant levels corresponded with differences in chemical content (including total phenolics, total flavonoids, kaempferol and quercetin) between Shenjing and Qixing. The antioxidant ability of H. undatus flower seems attributable to total phenolics (mainly total flavonoids). Kaempferol is one of the main bioactive components. H. undatus flower exerts its antioxidant effects through metal chelation and radical scavenging via hydrogen atom (H•) and electron (e) donation.
Źródło:
Acta Biologica Cracoviensia. Series Botanica; 2013, 55, 1
0001-5296
Pojawia się w:
Acta Biologica Cracoviensia. Series Botanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation of Al Nanoparticles and Their Influence on the Thermal Decomposition of RDX
Autorzy:
Hou, C.
Geng, X.
An, Ch.
Wang, J.
Xu, W.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/358260.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
Al nanoparticles
properties
RDX
thermal decomposition
Opis:
Aluminum (Al) nanoparticles were prepared by the DC arc plasma method in order to study the influence of Al nanoparticles on the thermal decomposition of cyclotrimethylenetrinitramine (RDX). The Al powder was characterized by TEM, BET, XRD, and LSA, and the thermal decomposition of RDX and RDX/nanometer Al were examined by DSC. Based on the DSC curves, the thermal decomposition parameters of the samples were calculated and compared. The results showed that the particles of Al are homogeneous and fine, and that the surface is smooth. The TEM results showed that the nanoparticles are spherical, with an average diameter of approximately 60 nm. The peak temperature of RDX decomposition decreased by 4.36 K at the heating rates of 5, 10, and 20 K/min after the addition of nano-Al powder, and the activation energy for decomposition decreased by about 11 kJ/mol. Furthermore, the critical explosion temperature was also reduced. These observable changes indicate that Al nanoparticles act as catalysts for the thermal decomposition of RDX.
Źródło:
Central European Journal of Energetic Materials; 2013, 10, 1; 123-133
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Fast Method of Feature Extraction for Lowering Vehicle Pass-By Noise Based on Nonnegative Tucker3 Decomposition
Autorzy:
Wang, H.
Cheng, G.
Deng, G.
Li, X.
Li, H.
Huang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/177883.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
vehicle pass-by noise
NTD
feature extraction
sound pressure level
Opis:
Usually, the judgement of one type fault of vehicle pass-by noise is difficult for engineers, especially when some significant features are disturbed by other interference noise, such as the squealing noise is almost simultaneous with the whistle in the exhaust system. In order to cope with this problem, a new method, with the antinoise ability of the algorithm on the condition by which the features are entangled, is developed to extract clear features for the fault analysis. In the proposed method, the nonnegative Tucker3 decomposition (NTD) with fast updating algorithm, signed as NTD_FUP, can find out the natural frequency of the parts/components from the exhaust system. Not only does the NTD_FUP extract clear features from the confused noise, but also it is superior to the traditional methods in practice. Then, an aluminium-foil alloy material, which is used for the heat shield for its lower noise radiation, replaces the aluminium alloy alone. Extensive experiments show that the sound pressure level of the vehicle pass-by noise is reduced 0.9 dB(A) by the improved heat shield, which is also considered as a more lightweight design for the exhaust system of an automobile.
Źródło:
Archives of Acoustics; 2017, 42, 4; 619-629
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CdSe/ZnS Colloidal Quantum Dots with Alloyed Core/Shell Interfaces: A Photoluminescence Dynamics Study
Autorzy:
Dziatkowski, K.
Ratchford, D.
Hartsfield, T.
Li, X.
Gao, Y.
Tang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/1492859.pdf
Data publikacji:
2011-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.67.Hc
78.47.jd
78.55.Et
Opis:
Time-resolved photon counting technique was employed to study dynamics of photoluminescence from the ensemble and single CdSe/ZnS quantum dots with the alloyed core/shell interfaces. The ensemble data revealed enhanced effect of disorder-induced trap states for increasing emission energy, as implied from the changes in the distribution of total decay rates. The emission trajectories collected for single quantum dots showed familiar, two-state blinking pattern. It suggests that in a large-band-offset CdSe/ZnS system, the introduced alloying of the core-to-shell region cannot smooth enough the confinement potential in order to suppress nonradiative Auger recombination and blinking.
Źródło:
Acta Physica Polonica A; 2011, 120, 5; 870-873
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An enigmatic, possibly chemosymbiotic, hexactinellid sponge from the early Cambrian of South China
Autorzy:
Botting, J.P.
Muir, L.A.
Li, X.-F.
Lin, J.-P.
Powiązania:
https://bibliotekanauki.pl/articles/19994.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
Porifera
Hexactinellida
symbiosis
chemosynthesis
Early Cambrian
South China
Cambrian
China
Opis:
Six specimens of a strongly curved, cylindrical hexactinellid sponge have been recovered from the Tommotian– Atdabanian Hetang Biota of South China, and are described as Decumbispongia yuani gen. et sp. nov. The robust, thick−walled sponge shows no evidence of an osculum or basal structures, and the body form is inconsistent with an upright, filter−feeding life position. Interpretations as a detritivore feeding by amoeboid extensions, or as a facultative chemosynthetic symbiosis of sponge and bacteria are considered. The latter interpretation is preferred due to the highly constrained body shape, and the body form is interpreted from this perspective. The species indicates that Cambrian sponges occupied at least some autecological niches that appear to have been vacant since that time.
Źródło:
Acta Palaeontologica Polonica; 2013, 58, 3
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Polytetrafluorethylene on the Mechanical and Safety Properties of a Composite Modified Double Base Propellant
Autorzy:
Sun, S.
Zhang, T.
Zhao, B.
Zhang, G.
Li, X.
Luo, Y.
Powiązania:
https://bibliotekanauki.pl/articles/358296.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
PTFE fibres
CMDB propellant
mechanical properties
mechanical sensitivity
combustion
Opis:
A novel Composite Modified Double Base (CMDB) propellant, formed by mechanically mixing aluminium/polytetrafluorethylene (Al/PTFE) powders, was prepared through a rolling process. A variety of tests, such as tensile properties, particle size analysis etc., were carried out to study the influence of PTFE on the CMDB propellant properties. The PTFE deformed from particles to fibres under a uniform shear force, forming a fibre network which greatly improved the propellant’s mechanical properties. Compared to that of the CMDB propellant without PTFE, the elongation of the propellant containing 6% PTFE was increased by 26 times, and moreover, the impact strength was enhanced by 326% at −40 °C. Significantly, the propellant friction and impact sensitivities were reduced by 75.8% and 35.6%, respectively. In addition, the presence of PTFE in the propellant resulted in fluorination of the Al. The gaseous combustion product AlF3 reduced the propellant combustion agglomeration. Consequently, PTFE significantly promoted the propellant’s mechanical performance, decreased the shock (friction, impact) sensitivity and reduced combustion agglomeration.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 3; 468-484
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of quinoline from aqueous solutions by lignite, coking coal and anthracite. Adsorption kinetics
Autorzy:
Xu, H.
Wang, Y.
Huagn, G.
Fan, G.
Gao, L.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/110664.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
quinoline adsorption
coking coal
kinetics
adsorption activation energy
coal adsorption
Opis:
Basing on the concept of circular economy, a novel method of industrial organic wastewater treatment by using adsorption on coal is introduced. Coal is used to adsorb organic pollutants from coking wastewaters. After adsorption, the coal would be used in its original purpose, as its value was not reduced and the pollutant was reused. Through the systemic circulation of coking wastewater zero emissions can be achieved. Lignite, coking coal and anthracite were used as adsorbents in batch experiments. The quinoline removal efficiency of coal adsorption was investigated. Both the coking coal and anthracite exhibited properties well-suited for quinoline adsorption removal. The experimental data were fitted to the pseudo-first- order and pseudo-second-order kinetic equations as well as intraparticle diffusion and Bangham models. An attempt was made to find the rate-limiting step involved in the adsorption processes. Both boundary-layer diffusion and intraparticle diffusion are likely involved in the rate-limiting mechanisms. Effect of pH on coal adsorptions by coking coal was investigated. The process of quinoline adsorption on coal was researched. The coal adsorption method for removing refractory organic pollutants is a great hope for achieving wastewater zero emission for coking plants.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 397-408
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A class of nonlocal integrodifferential equations via fractional derivative and its mild solutions
Autorzy:
Wang, J.
Yan, X.
Zhang, X. H.
Wang, T. M
Li, X. Z.
Powiązania:
https://bibliotekanauki.pl/articles/255673.pdf
Data publikacji:
2011
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
integrodifferential equations
fractional derivative
nonlocal conditions
resolvent operator and their norm continuity
fixed point theorem
mild solutions
Opis:
In this paper, we discuss a class of integrodifferential equations with nonlocal conditions via a fractional derivative of the type: [formula]. Some sufficient conditions for the existence of mild solutions for the above system are given. The main tools are the resolvent operators and fixed point theorems due to Banach's fixed point theorem, Krasnoselskii's fixed point theorem and Schaefer's fixed point theorem. At last, an example is given for demonstration.
Źródło:
Opuscula Mathematica; 2011, 31, 1; 119-135
1232-9274
2300-6919
Pojawia się w:
Opuscula Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Seasonal dynamics in cambial activity and the formation of xylem and phloem in the branches of Cinnamomum camphora
Autorzy:
Dong, M.
Xu, Y.M.
Lin, H.
Li, X.Q.
Xia, Q.Q.
Powiązania:
https://bibliotekanauki.pl/articles/41385.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
seasonal dynamics
cambial activity
formation
xylem
phloem
branch formation
tree
tropical tree
Cinnamomum camphora
wood formation
phenology
Opis:
The cambial activity and periodicity of secondary xylem and phloem formation have been less studied in tropical tree species than in temperate ones. Cambium activity is the only source of timber production. Studies on its activity and xylem formation can provide helpful data for dendrochronology and possible factors that control tree growth, the yield and quality of wood. Cinnamomum camphora is an important fast-growing tree for furniture and sculpture wood in South China. Its dynamics of cambial activity was not reported. During the growth season in 2011, five trees of Cinnamomum camphora plantation were monitored on the campus of Huazhong Agricultural University in central china (located on 113°41’ to 115°05’ E and 29°58’ to 31°22’ N). Sampling time was from 13, February 2011 to 13, February 2012. Some small stems of 15–20 cm length were selected to sample in the middle of 2–3 years old health branches in the central crown of these trees. The observational study found that the cambium of camphor trees was active from March to October and dormant from November to February. Onset of cambial cell division was observed in early March, one week after sprouting of new buds. The morphology of the cells and number of cell layers in the cambium zone varied throughout the year. In early March, cambium reactivated with the rising of temperature, the cell wall was relative thick. The number of cell layers increased from 2–3 in middle Feb. to 3–5. In June, the number of cell layers in cambium reached the maximum of 5–7 in a radial direction. In mid March, phloem cells began to differentiate, followed by xylem three weeks later. The number of cell layers in immature phloem and xylem increased dramatically before mid June and the increment of cell layers in xylem was almost fifth times of phloem in the differentiating process. The phloem cells mainly stopped dividing new cells in end of October, but xylem cells were still in the activity a week later. The annual activities of cambium was in accordance with the air mean temperature change in 2011–2012. The results showed that the cambial activity and formation of xylem and phloem were related to the environmental factors, especially the temperature.
Źródło:
Dendrobiology; 2016, 75
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on the influence of excavation and loading on Z-Direction displacement in surrounding soil mass
Badania wpływu prac wydobywczych i składowania na wielkość przemieszczenia gruntu w kierunku z w otaczającym górotworze
Autorzy:
Li, X.
Zhou, W.
Han, L.
Xi, W. J.
Crusoe Jr., G. E.
Powiązania:
https://bibliotekanauki.pl/articles/220213.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wydobycie
składowanie
wytrzymałość gruntu w trakcie składowania
naprężenia
przemieszczenia
kołowy przebieg przemieszczenia
excavation
loading
unloading strength
stress
region displacement
displacement circle
Opis:
To probe into the pattern in which the excavation and loading process have on such factors as stress and displacement in neighboring regions of deep open pits, a mechanical unloading model in coal mining process and another model for the loading process are set up respectively. Besides, FLAC3D software is used to simulate dynamic excavating and loading process in open pits and record such data as the unbalanced stress, unloading strength and displacement fluctuations, which further serve as basis for studying the functional relationship about different mining heights and scope of influence using fitting method. The research results indicate that the unloading strength enhances with increasing mining depth in a linear fashion. In addition, a noticeable displacement circle takes shape around the stope, which would also extends with growing mining depth. As to waste loading, it brings about large-scale surface subsidence in neighboring regions, which follows a logarithm function convergence pattern with the distance away from the dump border. Under combined effects of excavation and loading, the value of the soil mass displacement would increase with growing mining depth and loading height. Specifically, the soil displacement at a distance of 100 m away from the stope border (around 200 m away from the outer dump border) is abnormally significant and it further develops at a rate of 0.0228 mm/h.
W celu zbadania zależności pomiędzy procesami wydobycia i składowania urobku a takimi czynnikami jak naprężenia i przemieszczenia w sąsiadujących partiach głębokich wyrobisk odkrywkowych, wykorzystano model mechaniczny procesu urabiania węgla oraz model procesu jego składowania. Wykorzystano oprogramowanie FLAC 3D do symulacji procesów wydobycia i składowania w wyrobiskach odkrywkowych, zapisano odpowiednie dane: niezrównoważone naprężenia, wytrzymałość w trakcie odciążania oraz wahania przemieszczeń gruntu, które wykorzystane zostały następnie jako podstawa do badania funkcjonalnych zależności pomiędzy wysokością poziomu wydobycia a skalą oddziaływania, przy użyciu odpowiednich metod dopasowania. Wyniki badań wskazują, że wytrzymałość w trakcie odciążania wzrasta liniowo z głębokością. Ponadto, zarejestrowano wyraźny kołowy przebieg przemieszczenia wokół zbocza, który także rośnie z głębokością. W przypadku obciążenia wskutek urobku odpadowego, zanotowano obniżenia terenu o dużym zasięgu o przebiegu konwergencji opisanym funkcją logarytmiczną odległości od miejsca składowania urobku odpadowego. W przypadku wystąpienia połączonych efektów wydobycia i składowania, wielkość przemieszczeń mas gruntu wzrastać będzie wraz z głębokością prowadzenia prac i wysokością składowania. Przemieszczenie gruntu w odległości 100 m od brzegu wyrobiska (ok. 200 od zewnętrznej granicy składowiska) okazuje się niepokojąco duże i postępujące w tempie 0.0228 mm/h).
Źródło:
Archives of Mining Sciences; 2014, 59, 4; 959-970
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
In vitro cloning potential and phytochemical evaluations of aneuploid individuals produced from reciprocal crosses between diploid and triploid in Echinacea purpurea L.
Autorzy:
Li, Q.
Jiang, W.
Ren, Y.
Chen, R.
Li, X.
Yang, Y.
Wu, H.
Powiązania:
https://bibliotekanauki.pl/articles/58769.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Botaniczne
Opis:
Aneuploidy often presents large variations in morphology, physiology, biochemistry, and genetics owing to karyotypic imbalance. This study aimed to evaluate the efficacy of aneuploid breeding in Echinacea purpurea L, an important medicinal plant. Reciprocal crosses between diploid and triploid plants were performed to generate aneuploid plants. Cross with triploid as female parent resulted in increased production of aneuploid individuals (19 of 23; 82.61%), while using diploid as female parent yielded much higher percentage of diploid progenies (130 of 133; 97.74%). Each aneuploid had particular karyotypic characteristics compared to the parents. The proportions of median, submedian, and subterminal centromere location chromosomes in gross chromosomes among aneuploids and two parents showed large variations. Although aneuploids had relatively lower adventitious bud regeneration rates than their parents, almost half of them looked morphologically normal, with high survival rates when transplanted to ex vitro conditions. Among the bioactive compounds assessed, cichoric acid and chlorogenic acid contents were extremely encouraging. Most aneuploids had higher cichoric acid and chlorogenic acid contents than their parents. For example, A2 had the highest cichoric acid content of 21.98 mg/g dry weight, more than twice the values of diploid and triploid. Meanwhile, A21 had the highest chlorogenic acid content of 1.84 mg/g, approximately five times more than the parental values. Eleven superior aneuploid lines were successfully screened as breeding candidates. The present findings indicated E. purpurea is highly tolerant of karyotypic imbalance and aneuploid plants could serve as prospective breeding resources in E. purpurea.
Źródło:
Acta Societatis Botanicorum Poloniae; 2017, 86, 3
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Defect Recovery in α-Fe e$\text{}^{-}$-irradiated at 300 K
Autorzy:
Dai, G. H.
Li, X. H.
Moser, P.
Moya, G.
Van Duysen, J. C.
Powiązania:
https://bibliotekanauki.pl/articles/1928989.pdf
Data publikacji:
1993-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.70.Bv
61.80.Fe
78.70.Bj
Opis:
Defect annealing recovery has been studied, by measuring positron lifetime spectra, in high-purity α-iron irradiated at 300 K with 3 MeV electrons to a fluency of 7 × 10$\text{}^{19}$ cm$\text{}^{-2}$. Vacancy clusters containing 6-10 single vacancies were observed immediately after irradiation during which they were possibly forming (the so-called "irradiation annealing"). With increasing temperature, the agglomerates continually grow in size at the expense of their concentration, giving rise to the formation of microvoids (> 15 vacancies). Also present were other types of defects, probably immobile vacancies trapped by impurity (e.g. carbon) atoms and dislocation/loops generated presumably from collapse of voids during the relatively high dose irradiation and/or the annealing. The immobile vacancies eventually became movable at around 350 K, supplying the growing clusters and thus leading to a stabilization in their concentration till around 500 K. Between 500 and 700 K, microvoids gradually evaporated, but the dislocation-associated defects were able to survive annealing at temperatures as high as 700 K. The void size and concentration and their evolution have been evaluated on the basis of both the to date theoretical and experimental studies. The temperature dependence was also, observed of positron trapping into vacancy agglomerates of various sizes.Za
Źródło:
Acta Physica Polonica A; 1993, 83, 3; 277-286
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Molecular cloning, recombinant expression, and purification of osteocalcin in sika deer (Cervus nippon) antler
Autorzy:
Li, X.
Liu, M.
Bai, X.
Li, Y.
Zhao, Y.
Wang, S.
Wang, J.
Powiązania:
https://bibliotekanauki.pl/articles/2087587.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Cervus nippon
osteocalcin
molecular cloning
expression
purification
Źródło:
Polish Journal of Veterinary Sciences; 2019, 1; 143-150
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Weighted prediction method with multiple time series using multi-kernel least squares support vector regression
Metoda ważonej predykcji wielokrotnych szeregów czasowych z wykorzystaniem wielojądrowej regresji wektorów wspierających metodą najmniejszych kwadratów (LS-SVR)
Autorzy:
Guo, Y. M.
Ran, C. B.
Li, X. L.
Ma, J. Z.
Zhang, L.
Powiązania:
https://bibliotekanauki.pl/articles/302067.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
szereg czasowy
predykcja ważona
regresja wektorów wspierających metodą najmniejszych kwadratów (LS-SVR)
uczenie wielojądrowe (MKL)
time series
weighted prediction
least squares support vector regression (LS-SVR)
multiple kernel learning (MKL)
Opis:
Least squares support vector regression (LS-SVR) has been widely applied in time series prediction. Based on the case that one fault mode may be represented by multiple relevant time series, we utilize multiple time series to enrich the prediction information hiding in time series data, and use multi-kernel to fully map the information into high dimensional feature space, then a weighted time series prediction method with multi-kernel LS-SVR is proposed to attain better prediction performance in this paper. The main contributions of this method include three parts. Firstly, a simple approach is proposed to determine the combining weights of multiple basis kernels; Secondly, the internal correlative levels of multiple relevant time series are computed to present the different contributions of prediction results; Thirdly, we propose a new weight function to describe each data's different effect on the prediction accuracy. The experiment results indicate the effectiveness of the proposed method in both better prediction accuracy and less computation time. It maybe has more application value.
Regresja wektorów wspierających metodą najmniejszych kwadratów (LS-SVR) jest szeroko stosowana w predykcji szeregów czasowych. Opierając się na fakcie, że jeden rodzaj niezdatności może być reprezentowany przez wiele relewantnych szeregów czasowych, w niniejszej pracy wykorzystano wielokrotne szeregi czasowe do wzbogacenia informacji predykcyjnych ukrytych w szeregach czasowych oraz posłużono się metodą uczenia wielojądrowego (multi-kernel) w celu mapowania informacji do wysoko wymiarowej przestrzeni cech, a następnie zaproponowano metodę ważonej predykcji wielokrotnych szeregów czasowych z wykorzystaniem wielojądrowej regresji LS-SVR służącą osiągnięciu lepszej wydajności prognozowania.Metoda składa się z trzech głównych części. Po pierwsze, zaproponowano prosty sposób określania łącznej wagi wielu jąder podstawowych. Po drugie, obliczono wewnętrzne poziomy korelacyjne wielokrotnych szeregów czasowych w celu przedstawienia różnego udziału wyników prognozowania. Po trzecie, zaproponowano nową funkcję wagi do opisu różnego wpływu poszczególnych danych na trafność predykcji. Wyniki doświadczenia wskazują na skuteczność proponowanej metody zarówno jeśli chodzi o lepszą trafność predykcji jak i krótszy czas obliczeniowy. Proponowane rozwiązanie ma potencjalnie dużą wartość aplikacyjną.
Źródło:
Eksploatacja i Niezawodność; 2013, 15, 2; 188-194
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Easy Vortex Motion in an Artificial Channel of $YBa_2Cu_3O_{7-δ}$ Superconducting Films
Autorzy:
Jukna, A.
Barboy, I.
Jung, G.
Abrutis, A.
Li, X.
Wang, D.
Sobolewski, R.
Powiązania:
https://bibliotekanauki.pl/articles/1813381.pdf
Data publikacji:
2008-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
74.25.Sv
74.25.Qt
74.78.Bz
Opis:
Quasi-Josephson effect produced by a coherent vortex motion in the horizontal part of the laser-performedΠ-shaped channel of a $YBa_2Cu_3O_{7-δ}$ superconducting bridge was investigated by means of electric transport measurements. We observed that in our structures, in a limited range of temperatures and bias currents, the vortices were confined in the channel only and moved coherently with the velocity of $3×10^4$ m/s. The corresponding current-voltage characteristics of the bridge exhibited Josephson-like voltage steps with the amplitude dependent on temperature, but independent of the bias current.
Źródło:
Acta Physica Polonica A; 2008, 113, 3; 959-962
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Isolation of biosynthesis related transcripts of 2,3,5,4-tetrahydroxy stilbene-2-O-beta-D-glucoside from Fallopia multiflora by suppression subtractive hybridization
Autorzy:
Zhao, W.
Sheng, S.
Liu, Z.
Lu, Di.
Zhu, K.
Li, X.
Zhao, S.
Yao, Y.
Powiązania:
https://bibliotekanauki.pl/articles/58239.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
isolation
biosynthesis
transcriptome
2,3,5,4'-tetrahydroxy stilbene-2-O-beta-D-glucoside
Fallopia multiflora
hybridization
gene expression
medicinal plant
Chinese herb
Opis:
2,3,5,4'-tetrahydroxy stilbene-2-O-ß-D-glucoside (THSG) exerts multiple pharmacodynamic actions, found in Fallopia multiflora, but the biosynthesis pathway of THSG is still unclear. To clear this ambiguity, we constructed suppression subtractive hybridization (SSH) libraries to screen the genes involved in THSG biosynthesis from two F. multiflora varieties, which vary significantly in THSG content. Twelve non-redundant differentially expressed sequence tags were obtained and the full lengths of 4 unreported fragments were amplified by rapid amplification of cDNA ends. We totally got 7 fulllength transcripts, and all of them were aligned to the transcriptome and digital gene expression tag profiling database of four F. multiflora tissues (root, stem and leaf from Deqing F. multiflora and another root from Chongqing F. multiflora; data unpublished) using local BLAST. The results showed that there was a significant, organ specific difference in the expression of fragments and full-length sequences. All the sequences were annotated by aligning to nucleotide and protein databases. Kyoto Encyclopedia of Genes and Genomes pathway analysis indicated that THSG biosynthesis was correlated with multiple life activities.
Źródło:
Acta Societatis Botanicorum Poloniae; 2014, 83, 2
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetics of photoelectrocatalytic degradation of diclofenac using N, S co-doped TiO2 nano-crystallite decorated TiO2 nanotube arrays photoelectrode
Autorzy:
Cui, Y.
Deng, X.
Ma, Q.
Zhang, H.
Cheng, X.
Li, X.
Xie, M.
Cheng, Q.
Li, B.
Powiązania:
https://bibliotekanauki.pl/articles/207955.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
effluents
nanotubes
sodium sulfate
sulfur compounds
yarn
photoelectrocatalytic degradation
ścieki
nanorurki
siarczan sodu
związki siarki
przędza
Opis:
As a non-steroidal anti-inflammatory drug, diclofenac, was commonly used as analgesic, antiarthritic and antirheumatic, and has frequently been detected in municipal wastewater treatment plants (MWTPs) effluents and demonstrated to be potentially environmental risk on human beings. In the present study, N, S co-doped TiO2 nano-crystallites decorated TiO2 nano-tube arrays (N, S-TiO2 NCs/TiO2 NTAs) photoelectrode was used to degrade diclofenac containing wastewater. In addition, the effects of some critical parameters including initial pH, external positive potential, sodium sulfate concentration and initial diclofenac concentration on the photoelectrocatalytic (PEC) degradation of diclofenac containing wastewater and dynamic characteristics were investigated systematically. Results showed that N, S-TiO2 NCs/TiO2 NTAs photoelectrode exhibited high PEC efficiency for the degradation of diclofenac, in which the PEC processes fitted well with the Langmuir–Hinshelwood (L–H) model. Furthermore, external additional anions such as Cl, ClO and NO3 – played an important role in inhibiting the degradation of diclofenac. Also, the N, S-TiO2 NCs/TiO2 NTAs photoelectrode possessed good stability for consecutive applications for degradation of diclofenac, which could potentially be utilized in wastewater treatment.
Źródło:
Environment Protection Engineering; 2018, 44, 2; 117-130
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Research on Characterization of Crushability for Foundry Sand Particles
Autorzy:
Dai, Y.
Ma, Q. Y.
Li, X. H.
Zhang, X.
Hu, F. P.
Zhang, Y.
Xie, W. D.
Powiązania:
https://bibliotekanauki.pl/articles/379689.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
foundry sand particle
mechanical load
AFS grain fineness
crushability
piasek odlewniczy
obciążenie mechaniczne
rozdrobnienie ziarna
Opis:
In this paper, crushability of foundry sand particles was studied. Three kinds of in-service silica sands in foundry enterprises selected as the study object, and foundry sand particles were subjected to mechanical load and thermal load during service were analyzed. A set of methods for simulating mechanical load and thermal load by milling and thermal-cold cycling were designed and researched, which were used to characterize the crushability for silica sand particles, the microstructure was observed by SEM. According to the user’s experience in actual application, the crushability of Sand C was the best and then Sand B, the last Sand A. The results indicated that mechanical load, thermal load and thermal-mechanical load can all be used to characterize the crushability of foundry sand particles. Microscopic appearances can qualitatively characterize the crushability of foundry sand particles to a certain extent, combining with the additions and cracks which are observed on the surface.
Źródło:
Archives of Foundry Engineering; 2017, 17, 4; 231-235
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on the rheological properties of CL-20/HTPB casting explosives
Autorzy:
Li, H.-X..
Wang, J-Y.
An, C.-W.
Powiązania:
https://bibliotekanauki.pl/articles/358310.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
casting explosive
particle gradation
rheological properties
plasticizer
Opis:
The rheological properties of ε-2,4,6,8,10,12-hexanitro-2,4,6,8,10,12hexaazaisowurtzitane (CL-20)/hydroxy-terminated polybutadiene (HTPB) casting explosives with different formulations were tested and analyzed. The effects of both the weight percentage (wt.%) of CL-20 and its particle size, as well as the type and content of plasticizers, on the rheological properties of CL-20/HTPB casting explosives were investigated in detail. The results show that the viscosity and pseudoplasticity of CL-20/HTPB casting explosives increase with increasing wt.% of CL-20 and decreasing particle size. The gradation of CL-20 particle size also affects the rheological properties of the casting explosives. When the mixing ratio of 30 μm to 2 μm particles is 3:1, the viscosity reaches its lowest value and the non-Newtonian index reaches the maximum value of 0.5698. The viscosity, non-Newtonian index and impact sensitivity of the samples studied are clearly decreased by the addition of dioctyl adipate (DOA), dioctyl sebacate (DOS) or dibutyl phthalate (DBP). However, the three plasticizers do not appear to affect the thermal decomposition of CL-20/HTPB casting explosives. With respect to the rheological properties, mechanical properties and sensitivity, DOA is the optimum plasticizer to use in CL-20/HTPB casting explosives.
Źródło:
Central European Journal of Energetic Materials; 2014, 11, 2; 237-255
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Indicated mean effective pressure oscillations in a natural gas combustion engine by recurrence plots
Analiza wykresów rekurencyjnych dla średniego efektywnego ciśnienia indykowanego w silniku spalinowym zasilanym gazem naturalnym
Autorzy:
Litak, G.
Syta, A.
Yao, B. -F.
Li, G.-X
Powiązania:
https://bibliotekanauki.pl/articles/280206.pdf
Data publikacji:
2009
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
engine
combustion
recurrence plot
nonlinear oscillations
Opis:
We investigate the nonlinear time series of Indicated Mean Effective Pressure (IMEP) of the spark ignition engine cyclic combustion process of a natural gas. By applying the embedding theorem and the recurrence plots technique, we show changes in the engine dynamics for different equivalence ratios. Especially, we provide arguments for intermittency behaviour.
Zbadano nieliniowe przebiegi czasowe Średniego Ciśnienia Indykowanego cyklicznego procesu spalania w silniku spalinowym zasilanym gazem naturalnym. Stosując twierdzenie o zanurzeniu oraz technikę wykresów rekurencyjnych, pokazano istotne różnice w dynamice silnika przy zmianie składu mieszanki paliwa wyrażonej wartością współczynnika równowagowego. W szczególności podano argumenty przemawiające za występowaniem zjawiska intermitencji.
Źródło:
Journal of Theoretical and Applied Mechanics; 2009, 47, 1; 55-67
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of Polymeric Binders on the RDX-based Explosive Response Character under Slow Cook-off Conditions
Autorzy:
Yan, X.
Li, X. D.
Zhang, Y. R.
Liu, L.
Zhang, X. M.
Tan, Y. X.
Wang, H.
Wang, X. Q.
Powiązania:
https://bibliotekanauki.pl/articles/358419.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
RDX-based explosive
slow cook-off experiment
binder content
binder type
Opis:
Due to safety requirements, insensitive behaviour under slow thermal heating (cook-off) conditions is a desirable behaviour for today’s munitions. In this paper a cook-off device is designed to test two groups of RDX-based PBX explosives. In the first group the binder type was varied and in the second group the binder content of the RDX-based explosive was changed. Eleven samples were examined in order to evaluate the influence of four different binders and seven different binder contents on the shell deformation and the degree of the involved reaction. The test results showed that the degree of the reaction can be improved by changing the binder content, but not by the binder type. This phenomenon was explained by the thermal-conduction theory.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 2; 339-350
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simplified analyses of stress induced anisotropy in remolded soft clay under undrained conditions
Autorzy:
Lin, P.
Li, Z.-x.
Garg, A.
Yadav, J. S.
Powiązania:
https://bibliotekanauki.pl/articles/1818489.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
stress induced anisotropy
Shantou soft clay
true triaxial experiment
anizotropia wywołana naprężeniem
miękka glinka Shantou
prawdziwy eksperyment trójosiowy
Opis:
Purpose: The soil’s anisotropy induced by stress (i.e. stress induced anisotropy) has an important effect on the behavior of soil. This paper focuses on analyzing the anisotropy of remolded Shantou soft clay under compression stress path. Design/methodology/approach: Experiments were executed by using three axle experimental instruments. The data obtained from the plain strain tests were analyzed and the relationship between stress and strain was calculated by using the modified Duncan- Chang and Lade-Duncan models. The models were modified under the condition of plain strain and cohesion. Findings: It was concluded that in complex stress path conditions, the conventional triaxial tests may not fully reflect the actual stress of soil and its response in the Duncan-Chang and Lade-Duncan models. Research limitations/implications: The formulation of Mohr-Coulomb failure criterion in the plasticity framework is quite diffcult. As a result, dilatancy cannot be described. The properties of soil in unload or drained conditions remain to be part of further investigated. Practical implications: Based upon the two stiffness parameters, the modified Duncan- Chang model has captured the soil behaviour in a very conformable way and is recommened for practical modeling. These constitutive models of soil are widely used in the numerical analyses of soil structure such as embankments. Originality/value: Duncan-Chang and Lade-Duncan models widely used in engineering practices are modes based on conventional triaxial cases. Both models have have some inherent limitations to represent the stress-strain characteristics of soils, such as shear-induced dilatancy and stress path dependency and required corrections. In this investigation, the tests are carried out in undrained conditions. It is related to the properties of soil in load conditions.
Źródło:
Archives of Materials Science and Engineering; 2020, 105, 2; 56--64
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of medicinal plant Schisandra chinensis using a potential DNA barcode ITS2
Autorzy:
Li, X.-K.
Wang, B.
Han, R.-C.
Zheng, Y.-C.
Yin, H.-B.
Xu, L.
Zhang, J.-K.
Xu, B.-L.
Powiązania:
https://bibliotekanauki.pl/articles/56996.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
identification
internal transcribed spacer
medicinal plant
Schisandra chinensis
DNA barcode
Opis:
To test whether the internal transcribed spacer 2 (ITS2) region is an effective marker for using in authenticating of the Schisandra chinensis at the species and population levels, separately. And the results showed that the wild populations had higher percentage of individuals that had substitution of C→A at site 86-bp than the cultivated populations. At sites 10-bp, 37-bp, 42-bp and 235-bp, these bases of the Schisandra sphenanthera samples differed from that of S. chinensis. Two species showed higher levels of inter-specific divergence than intra-specific divergence within ITS2 sequences. However, 24 populations did not demonstrate much difference as inter-specific and intra-specific divergences were concerned. Both S. chinensis and S. sphenanthera showed monophyly at species level, yet the samples of different populations shown polyphyly at population level. ITS2 performed well when using BLAST1 method. ITS2 obtained 100% identification success rates at the species level for S. chinensis, with no ambiguous identification at the genus level for ITS2 alone. The ITS2 region could be used to identify S. chinensis and S. sphenanthera in the “Chinese Pharmacopoeia”. And it could also correctly distinguish 100% of species and 100% of genera from the 193 sequences of S. chinensis. Hence, the ITS2 is a powerful and efficient tool for species identification of S. chinensis.
Źródło:
Acta Societatis Botanicorum Poloniae; 2013, 82, 4
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Microstructural Evolution in HMX Based Plastic-bonded Explosive During Heating and Cooling Process: an in situ Small-angle Scattering Study
Autorzy:
Yan, G.
Tian, Q.
Liu, J.
Fan, Z.
Sun, G.
Zhang, C.
Wang, Y.
Chen, B.
Gong, J.
Zhou, X.
Yang, Z.
Nie, F.
Li, J.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/358618.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
SANS
SAXS
HMX-PBX
thermal damages
phase transition
Opis:
The thermal damage in octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) based plastic-bonded explosive (PBX) was investigated using in situ small-angle neutron and X-ray scattering techniques. The microstructural evolution was quantitatively characterized by the model fitting parameters of total interfacial surface area (Sv) and void volume distribution. The Sv of HMX-PBX decreased markedly above 100 °C, indicating the movement of binder into the voids. After subsequent cooling to room temperature, the scattering intensity increased significantly with increasing storage time, and a new population of voids with average diameter of 20 nm was observed, accompanied by the gradual phase transition of HMX from δ- to β-phase. The experimental results implied that serious damage within the HMX-PBX was developed during storage after heating.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 4; 916-926
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental and Numerical Simulation of the Tensile Behaviour of a Biaxial Warp-knitted Composite
Eksperymentalna i numeryczna symulacja rozciągania kompozytów wzmocnionych dwuosiową dzianiną osnowową
Autorzy:
Gao, X.
Yang, X.
Li, D.
Li, Y.
Powiązania:
https://bibliotekanauki.pl/articles/233474.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
biaxial warp-knitted composite
tensile behavior
finite element analysis
dwuosiowy kompozyt z osnową
zachowanie na rozciąganie
analiza elementów skończonych
Opis:
In this paper a composite reinforced with biaxial warp-knitted fabric and epoxy resin was manufactured by applying vacuum assisted resin transfer moldings (VARTM). The quasi-static tensile behaviour was experimentally tested in 0° and 90° directions, respectively. A finite element model of biaxial warp-knitted composites was developed on a meso-scale. The tensile behaviour of the composites was numerical simulated and compared with the experimental results. It showed that there is an approximate agreement between experimental and numerical results. There are maximum errors sum of squares of 14.52% and 33.29%. The finite element model of biaxial warp-knitted composites has higher accuracy, which can be used to study the static and dynamic mechanical properties.
Wykonano kompozyt wzmocniony dwuosiową dzianiną osnowową i żywicą epoksydową z zastosowaniem próżniowego przenoszenia żywicy (VARTM). Quasi-statyczne właściwości rozciągania badano doświadczalnie odpowiednio w kierunkach 0° i 90°. Opracowano model skończonych elementów dwuosiowych kompozytów z dzianinami. Dokonano symulacji numerycznej zachowania kompozytów podczas rozciągania, a następnie porównano wyniki teoretyczne z wynikami eksperymentalnymi. Wykazano, że istnieje przybliżona zgodność między wynikami eksperymentalnymi i liczbowymi. Stwierdzono, że błędy maksymalne błędy kształtują się na poziomie 14,52% i 33,29%. Zaprezentowany model elementów skończonych ma wysoką dokładność i można go wykorzystać do badania statycznych i dynamicznych właściwości mechanicznych kompozytów.
Źródło:
Fibres & Textiles in Eastern Europe; 2018, 6 (132); 71-76
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic response of a base-isolated concrete rectangular liquid-storage structure under large amplitude sloshing
Dynamiczna odpowiedź prostokątnej struktury magazynowania substancji ciekłych z wykorzystaniem betonu izolacyjnego
Autorzy:
Cheng, X.
Li, D.
Li, P.
Zhang, X.
Li, G.
Powiązania:
https://bibliotekanauki.pl/articles/230249.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
chlupotanie cieczy
amplituda duża
trzęsienie ziemi
struktura prostokątna
substancja ciekła
magazynowanie
nieliniowość
odpowiedź dynamiczna
liquid sloshing
large amplitude
earthquake
rectangular structure
liquid substance
storage
nonlinearity
dynamic response
Opis:
Considering concrete nonlinearity, the wave height limit between small and large amplitude sloshing is defined based on the Bernoulli equation. Based on Navier-Stokes equations, the mathematical model of large amplitude sloshing is established for a Concrete Rectangle Liquid-Storage Structure (CRLSS). The results show that the seismic response of a CRLSS increases with the increase of seismic intensity. Under different seismic fortification intensities, the change in trend of wave height, wallboard displacement, and stress are the same, but the amplitudes are not. The areas of stress concentration appear mainly at the connections between the wallboards, and the connections between the wallboard and the bottom.
Gdy amplituda chlupotania cieczy jest zbliżona do częstotliwości drgań struktury magazynowania substancji ciekłych (CRLSS), wówczas osiągamy rezonans i możemy zaobserwować silne zjawisko nieliniowe. Szkoda jest znacznie większa niż chlupotanie o małej amplitudzie. Obecnie brak jest odpowiedniego raportu na temat badań dynamicznej odpowiedzi struktury magazynowania substancji ciekłych z wykorzystaniem betonu izolacyjnego (CRLSS) z chlupotaniem o dużej amplitudzie, a wpływ materiałów betonowych nie jest brany pod uwagę. W związku z tym, w niniejszej pracy, w oparciu o równanie Bernoulliego, otrzymano ograniczone wysokości fali o dużej amplitudzie chlupotania oraz małej amplitudzie chlupotania. Na podstawie równań Naviera-Stokesa ustanowiono matematyczny model chlupotania o dużej amplitudzie i zbadano odpowiedź sejsmiczną CRLSS podczas chlupotania o dużej amplitudzie. Rozważając równanie Bernoulliego i zadowalający stan, chlupotanie substancji ciekłej jest liniowe, a nieliniowy kwadratowy człon jest lekceważony. W stałym i płynnym interfejsie, struktura magazynowania substancji ciekłych spełnia warunki ciągłości przemieszczania i równowagi siły oddziaływań. Właściwość mechaniczna gumowego zabezpieczenia izolacyjnego została opisana w oparciu o konstytutywną relacje modelu Mooney-Rivlin.
Źródło:
Archives of Civil Engineering; 2017, 63, 1; 33-45
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical Studies of the Local Structures and EPR Spectra for $VO^{2+}$ in $MB_4O_7$ (M = Zn, Cd) Glasses
Autorzy:
Li, C.
Zheng, X.
Powiązania:
https://bibliotekanauki.pl/articles/1206562.pdf
Data publikacji:
2014-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
76.30.Fc
Opis:
Electron spin resonance spectral parameters (g factors $g_{∥}$, $g_{⊥}$ and hyperfine structure constants $A_{∥}$, $A_{⊥}$) of a tetragonal $V^{4+}$ centers in $MB_4O_7$ (M = Zn, Cd) are theoretically investigated by using the perturbation formulae for a $3 d^1$ ion in tetragonally compressed octahedra. In these formulae, the contributions to the g factors from the tetragonal distortion, characterized by the tetragonal field parameters $D_{s}$ and $D_{t}$ are taken into account by considering the local structures of the ligand octahedron around the $V^{4+}$ due to the Jahn-Teller effect. Based on the calculations, the ligand octahedra around $V^{4+}$ are suggested to suffer about 5.7% and 4.3% relative compression along $C_4$ axis for $MB_4O_7$ glasses with M = Zn and Cd, respectively, and negative signs of the hyperfine structure constants $A_{∥}$ and $A_{⊥}$ for $V^{4+}$ centers in $MB_4O_7$ glasses were suggested in the discussion.
Źródło:
Acta Physica Polonica A; 2014, 125, 1; 73-76
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Self-assembling micelles obtained from PLLA/PEG and PDLA/PEG block copolymers in aqueous solutions
Autorzy:
Wu, X
Li, S.
Powiązania:
https://bibliotekanauki.pl/articles/285984.pdf
Data publikacji:
2012
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
polylactide
polyethylene glycol
stereocomplexation
self-assembly
anisotropy
Opis:
A series ofpolylactide-poly(ethylene glycol) (PLA- PEG) block copolymers were synthesized by ring-opening polymerization of L- or D-lactide in the presence of mono- or dihydroxyl PEG, using nontoxic zinc lactate as catalyst. Micelles were then prepared by direct dissolution of the obtained copolymers in aqueous medium without heating or using any organic solvents. Aqueous gel permeation chromatography and dynamic light scattering measurements were carried out to characterize the resulting micelles. Generally, mixed micelles containing both PLLA/PEG and PDLA/PEG copolymers appear lager and more compact compared to single ones. However, the size of mixed micelles is smaller than that of single ones which exhibit an anisotropic structure since stereocomplexation disfavors the formation of anisotropic micelles. The copolymer parameters such as structures, molar mass and PEG fraction strongly influence the formation of anisotropic micelles, and thus lead to various micellar sizes.
Źródło:
Engineering of Biomaterials; 2012, 15, 113; 6-8
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved dolphin swarm optimization algorithm based on information entropy
Autorzy:
Li, Y.
Wang, X.
Powiązania:
https://bibliotekanauki.pl/articles/200085.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
dolphin swarm optimization
information entropy
convergence
self-adaptive
combinational optimization
Opis:
In order to overcome the shortcomings of the dolphin algorithm, which is prone to falling into local optimum and premature conver-gence, an improved dolphin swarm algorithm, based on the standard dolphin algorithm, was proposed. As a measure of uncertainty, information entropy was used to measure the search stage in the dolphin swarm algorithm. Adaptive step size parameters and dynamic balance factors were introduced to correlate the search step size with the number of iterations and fitness, and to perform adaptive adjustment of the algorithm. Simulation experiments show that, comparing with the basic algorithm and other algorithms, the improved dolphin swarm algorithm is feasible and effective.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2019, 67, 4; 679-685
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flotation of molybdenite in the presence of microemulsified collector
Autorzy:
You, X.
Li, L.
Lyu, X.
Powiązania:
https://bibliotekanauki.pl/articles/109765.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
molybdenite
flotation
microemulsified collector
diesel
Opis:
In this paper molybdenite flotation using microemulsified collector was reported. The flotation performance of microemulsified collector and conventional diesel was compared. This study is a prelimi-nary investigation which uses pure molybdenite mineral in a modified Hallimond tube. The pH tests showed that the highest recovery of molybdenite in the presence of diesel and microemulsion was ob-tained at pH=6, reaching the recoveries of 93% and 90%, respectively. In the case of obtaining similar results, it was observed that the microemulsion consumption was lower in comparison to diesel. In the flotation tests with microemulsified collector the recovery slightly decreased because too large collector amount caused formation of more unstable bubbles. The contact angle measurements showed that the microemulsified collector was more effective for increasing the hydrophobicity of molybdenite surface. An adsorption model was proposed and it was suggested that the non-ionic surfactant present in the mi-croemulsified collector formed a continuous bimolecular layer, resulting in the increased surface hydro-phobicity. The accomplishment of this research demonstrated the viability of the use of microemulsified collector in molybdenite flotation, attempting to simplify the molybdenite flotation process, especially replace the conventional emulsified collector with high energy consumption and difficult storage.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 1; 333-341
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Finite element analysis of a superelastic shape memory alloy considering the effect of plasticity
Autorzy:
Jiang, X.
Li, B.
Powiązania:
https://bibliotekanauki.pl/articles/281467.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
SMAs
superelasticity
plasticity
constitutive law
finite element analysis
Opis:
In the present study, a shape memory alloy (SMA) phenomenological constitutive model is proposed that is capable of describing SMA superelastic behavior and the plasticity effect. The phase transformation constitutive model, by using strain and temperature as control variables to judge the phase transformation points in order to avoid the complexity of transformation correction, incorporates plasticity described by the von Mises isotropic hardening model. Further, the proposed model is implemented into the finite element package ANSYS by the user subroutine USERMAT. The results produced by the proposed model of simulated superelastic and plasticity behavior are compared with experimental data taken from the literature.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 4; 1355-1368
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Regional geographies of land transport networks in the Pearl River Delta mega-region, China: A longitudinal analysis
Autorzy:
Gao, X.
Li, T.
Powiązania:
https://bibliotekanauki.pl/articles/2140889.pdf
Data publikacji:
2018
Wydawca:
Fundacja Centrum Badań Socjologicznych
Tematy:
transport network
network efficiency
spatiotemporal evolution
Pearl River Delta
PRD
Opis:
This paper uses network-based efficiency measures to evaluate the efficiency implications of the evolution of the transport network in the Pearl River Delta (PRD) over the period 1988-2008. The network-based efficiency measures consider the relative ease of access between cities in terms of weighted relative travel cost. The results indicate that the spatial patterns of network efficiency are different from ‘core-periphery’ pattern derived from classical accessibility indicators. This implies that there are low network efficiency cities and high network efficiency cities in core and peripheral regions at the same time. In the first stage (1988-1998), the efficiency contour shows a ‘corridor’ pattern along the GuangShen traffic corridor between Guangzhou and Shenzhen in the eastern side of the Pearl estuary; in the following decade (1998-2008), with large-scale infrastructural developments, the spatial pattern has changed from a north-south corridor to an east-west contiguous distribution pattern. By 2008, the mean network efficiency value indicates that the efficiency levels within the PRD as a whole are tending towards optimal levels. We conclude by suggesting ways to promote the urban economic development based on the relationship between the network efficiency and per capita GDP.
Źródło:
Journal of Sustainable Development of Transport and Logistics; 2018, 3, 1; 37-52
2520-2979
Pojawia się w:
Journal of Sustainable Development of Transport and Logistics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mental health status of frontline clinical nurses fighting the Omicron variant of COVID-19 – a cross-sectional survey in China
Autorzy:
Li, T.
Qiu, X.
Gong, X.
Zhan, R.
Zheng, X.
Powiązania:
https://bibliotekanauki.pl/articles/28761758.pdf
Data publikacji:
2022
Wydawca:
Instytut Medycyny Wsi
Źródło:
Annals of Agricultural and Environmental Medicine; 2022, 29, 3; 375-382
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The cross-sectional survey on COVID-19 vaccine hesitancy and it predictors among Chinese parents of 3–17 years aged children in Shenzhen City
Autorzy:
Li, T.
Qiu, X.
Gong, X.
Zhan, R.
Zheng, X.
Powiązania:
https://bibliotekanauki.pl/articles/28761874.pdf
Data publikacji:
2022
Wydawca:
Instytut Medycyny Wsi
Źródło:
Annals of Agricultural and Environmental Medicine; 2022, 29, 1; 120-125
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of 2D and 3D models of salinity numerical simulation
Autorzy:
Li, C.
Pan, X.
Ke, J.
Dong, X.
Powiązania:
https://bibliotekanauki.pl/articles/260550.pdf
Data publikacji:
2015
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
2D model
3D model
salty
strong brine
numerical simulation
Opis:
For the study of the effect of 2D and 3D mathematical model in salinity simulation, with Liuheng island strong brine discharge of seawater desalination project as an example, using 2D and 3D salinity mathematical models of Liuheng island to simulate coastal hydrodynamic environment and salinity distribution before and after the concentrated brine discharge, and analyzed the results. Finally got the applicable scope of the two models, it has an important significance in the study of similar problems.
Źródło:
Polish Maritime Research; 2015, S 1; 26-29
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flotation kinetics and separation selectivity of coal size fractions
Autorzy:
Li, Y.
Zhao, W.
Gui, X.
Zhang, X.
Powiązania:
https://bibliotekanauki.pl/articles/110676.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal
flotation rate
combustible matter recovery
ash
particle size
Opis:
Flotation recovery and kinetics for three size fractions of coal were investigated. Flotation of combustible matter recovery was approximated with the first order kinetic equation while flotation of the ash forming minerals with the second order equation. Next, the equations for each size fraction were combined and a formula was obtained which was used for approximation of the experimental results using the so-called Fuerstenau upgrading curve, which relates the recovery of combustible matter recovery and recovery of ash forming minerals, both in concentrate. The Fuerstenau upgrading plot showed that the best selectivity was obtained for the middle size fraction of 0.25–0.075 mm, while the flotation selectivity of larger 0.5–0.25 mm and smaller –0.075 mm particles was diminished. This finding agrees with many other investigations.
Źródło:
Physicochemical Problems of Mineral Processing; 2013, 49, 2; 387-395
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Internal Friction of Phase Transformations Observed Around Room Temperature in Ga-In-Sn Eutectic Alloys
Tarcie wewnętrzne przemian fazowych obserwowanych przy temperaturze pokojowej w eutektycznym stopie Ga-In-Sn
Autorzy:
Jin, M.
Li, Q.
Ying, R.
Lu, X.
Jin, X.
Ding, X.
Powiązania:
https://bibliotekanauki.pl/articles/352781.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ga-In-Sn alloy
internal friction
liquid-liquid transition
stop Ga-In-Sn
tarcie wewnętrzne
wstępne krzepnięcie
Opis:
The phase transformation phenomena in eutectic Ga-In-Sn alloys around room temperature are studied by thermal analysis, internal friction, and in-situ XRD methods. The results show that in addition to the solidification transformation, a novel the so-called ‘pre-solidification’ phase transition, demonstrating first-order feature, is observed prior to the crystallization during cooling. The internal friction increases when the ‘pre-solidification’ effect occurs. The shear modulus increases until crystallization. An internal friction peak is attributed to the melting process observed during heating. The mechanism of the ‘pre-solidification’ transformation in Ga-In-Sn eutectic alloy is discussed.
Zjawiska przemian fazowych w eutektycznych stopach Ga-In-Sn, około temperatury pokojowej, badane są metodami analizy termicznej, tarcia wewnętrznego i XRD in-situ. Wyniki pokazują, że w dodatku do przemiany krzepnięcia, nowa przemiana tzw. „wstępne krzepnięcie”, o charakterze przemiany pierwszego rzędu, obserwowana jest przed krystalizacją podczas chłodzenia. Tarcie wewnętrzne zwiększa się, gdy występuje „wstępnie krzepnięcie”. Moduł sprężystości poprzecznej zwiększa się aż do krystalizacji. Wewnętrzny pik tarcia przypisany jest do topienia obserwowanego podczas ogrzewania. Omówiono mechanizm przemiany „wstępnego krzepnięcia” w eutektycznym stopie Ga-In-Sn.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 3A; 2097-2100
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pilling Performance of Cashmere Knitted Fabric of Woollen Ring Yarn and Mule Yarn
Pilling dzianin kaszmirowych wykonanych z wełnianych przędz obrączkowych i wózkowych
Autorzy:
Li, L.
Zhu, M.
Wei, X
Powiązania:
https://bibliotekanauki.pl/articles/231821.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
cashmere knitted fabric
ring yarn
mule yarn
pilling
kaszmirowe dzianiny
przędza ring
przędza muł
mechacenie
Opis:
The yarn for cashmere knitted fabric is mainly processed by ring spinning and mule spinning. In this paper, four kinds of cashmere dye colours (red, black, grey, and beige) were selected to compare the pilling performance of cashmere knitted fabric of mule yarn and ring yarn. The pilling rates of the fabrics for different colours and spinning methods were tested using ICI’s Pilling Box, and the worn-off weight of the pill and fuzz for each sample was measured using an electronic balance. The results showed that the pilling rate of cashmere knitted fabric of mule yarn is higher than that of ring yarn, and that the worn-off weight of cashmere knitted fabric of mule yarn is less than that of ring yarn.
Przędze przeznaczone dla dzianin kaszmirowych są głównie produkowane na przędzarkach obrączkowych i wózkowych. W pracy badano przędze barwione czterema kolorami (czerwony, czarny, szary i beż). Pilling dzianin wykonanych z przędz o czterech kolorach i na dwóch rodzajach przędzarek sprawdzono za pomocą „ICI Pilling Box”, za pomocą ważenia dzianin oraz wytworzonego puchu pil każdej z próbek. Stwierdzono, że pilling dzianin wykonanych z przędz przędzarek wózkowych jest większy niż z przędz obrączkowych.
Źródło:
Fibres & Textiles in Eastern Europe; 2014, 1 (103); 74-75
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model tests for shallow-water ship maneuverability in Three Gorges Reservoir
Autorzy:
Cai, C.
Cai, X.
Li, Y.
Powiązania:
https://bibliotekanauki.pl/articles/259922.pdf
Data publikacji:
2015
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
shallow-water test of ship model
simulated computation
maneuverability calibration
scale effect
Z shape test
K and T indexes
navigation safety
Opis:
This paper conducts calibration tests on the shallow-water maneuverability of 1:100 ship models for the typical navigation fleets in Three Gorges Reservoir. Major influential factors for the maneuverability similitude between models and prototypes and for scale effect were identified. A correction method for model scale was also established through model tests. Test results indicate that, by correcting the model scales of various fleets based on scale effect, the maneuverability indexes K’ (dimensionless of K) and T’ (dimensionless of T) of ship models are suitable for shallowwater tests, and properly reflect the maneuvering characteristics of prototypes. The findings provide an experimental basis for the navigation safety in Three Gorges Reservoir.
Źródło:
Polish Maritime Research; 2015, S 1; 136-140
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experiment on pressure characteristics of submerged floating tunnel with different section types under wave condition
Autorzy:
Li, Q.
Jiang, S.
Chen, X.
Powiązania:
https://bibliotekanauki.pl/articles/260098.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
submerged floating tunnel
section type
irregular waves
pressure characteristics
physical test
Opis:
Submerged floating tunnel (SFT for short) is a special underwater traffic structure, and wave load is one of the main environmental loads of SFT structure. In this paper, the 1:60 physical model test of three kinds of SFT in a two-dimensional wave flume is tested. The effects of random irregular waves on the SFT structure under different wave heights and periods are discussed. The study shows that: (1) Compared with circular and polygonal sections, there are multiple local peaks in the elliptical section during the period. with the increase of wave height, the number of local peaks also increases. It suggests that the rotational moment plays an important role in the elliptical section which has a relatively small depth-width ratio. (2) The position of the maximum and minimum pressure in the three kinds of SFT sections is consistent. Their vertical wave forces are all larger than their horizontal wave forces. The increase of vertical wave force relative to horizontal wave force in polygon section is larger than that in elliptical section, and the difference in the circular section is the smallest. (3) Under the same traffic condition, the wave force of the elliptical and polygon section is smaller, but they are more sensitive to the change of wave height, and the increase is obvious. The distribution of wave force in the circular section is more uniform.
Źródło:
Polish Maritime Research; 2018, S 3; 54-60
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Elastic-plastic analysis for circumferential through crack at boundary of semi’s brace under beam wave
Autorzy:
Wang, F.
Deng, X.
Li, Y.
Powiązania:
https://bibliotekanauki.pl/articles/260258.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
theoretical model
crack damaged brace
semi-submersible platform
beam wave
Opis:
In order to ensure the safety and reliability of the horizontal brace of semi-submersible platform (SEMI) which functions as the supporting structure in SEMI, this article presents an elastic-plastic method to analyze the variations of the crack tip opening displacement, elastic zone and plastic zone of the cracked section of the horizontal brace under beam wave. The brace of the SEMI was assumed to be located a circumferential through crack at its boundary in this article. In addition, the cracked section of the brace has been divided into crack zone, tensile plastic zone, elastic zone and compressive plastic zone in the presented theoretical model. Moreover, the closed form of the solution has been found in this article which is especially suitable solving complicated problems in practical engineering application. Also, a typical new-generation SEMI that is in practical use was selected to analyze the variation tendency of the cracked brace’s parameters using the proposed model which could give good suggestion to semi-submersible platform designers and managers.
Źródło:
Polish Maritime Research; 2018, 4; 106-113
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Existence of solutions for a four-point boundary value problem of a nonlinear fractional differential equation
Autorzy:
Dou, X.
Li, Y.
Liu, P.
Powiązania:
https://bibliotekanauki.pl/articles/255738.pdf
Data publikacji:
2011
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
four-point boundary value problem
Riemann-Liouville fractional derivative
Green's functions
Schauder fixed point theorem
Opis:
In this paper, we discuss a four-point boundary value problem for a nonlinear differential equation of fractional order. The differential operator is the Riemann-Liouville derivative and the inhomogeneous term depends on the fractional derivative of lower order. We obtain the existence of at least one solution for the problem by using the Schauder fixed-point theorem. Our analysis relies on the reduction of the problem considered to the equivalent Fredholm integral equation.
Źródło:
Opuscula Mathematica; 2011, 31, 3; 359-372
1232-9274
2300-6919
Pojawia się w:
Opuscula Mathematica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Machine Learning Method of PIDVCA
Autorzy:
Li, L.
Wang, X.
Chen, G.
Powiązania:
https://bibliotekanauki.pl/articles/1841618.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
learning methods
personified intelligence
collision avoidance
dynamic collision avoidance
static collision avoidance
Opis:
Building a dynamic collision knowledge base of self-learning is one of the core contents of implementing "personified intelligence" in Personifying Intelligent Decision-making for Vessel Collision Avoidance (short for PIDVCA). In the paper, the machine learning method of PIDVCA combined with offline artificial learning and online machine learning is proposed. The static collision avoidance knowledge is acquired through offline artificial learning, and the isomeric knowledge representation integration method with process knowledge as the carrier is established, and the Dynamic collision avoidance knowledge is acquired through online machine learning guided by inference engine. A large number of simulation results show that the dynamic collision avoidance knowledge base constructed by machine learning can achieve the effect of anthropomorphic intelligent collision avoidance. It is verified by examples that the machine learning method of PIDVCA can realize target perception, target cognition and finally obtain an effective collision avoidance decision-making.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2020, 14, 3; 533-540
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Life assessment of marine ethylene propylene rubber power cables based on hardness retention rate
Autorzy:
Meng, X.
Wang, Z.
Li, G.
Powiązania:
https://bibliotekanauki.pl/articles/141470.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ethylene propylene rubber (EPR)
nondestructive
hardness retention rate
elongation at break retention rate (EAB %)
termination index
Opis:
The lifetime of ethylene propylene rubber (EPR) insulated cables will decrease because of complex aging processes. From the safety perspective, insulation condition assessment of the cable is essential to maintain an efficient and reliable operation. As a nondestructive and online evaluation method, a hardness retention rate was used to estimate the lifetime of cable. First, accelerated thermal aging tests in the laboratory were performed to measure the elongation at break retention rate (EAB%) and a hardness retention rate at different temperatures. Second, the aging values were processed by the Arrhenius equation and time temperature superposition to assess aging lifetime of insulation at different temperatures and end levels. As the insulation condition assessment of the cable by hardness retention test has no approved standard, the EAB% data were correlated with hardness retention to provide an evaluation basis. The results show that when EAB% picks out the time corresponding to a certain amount of 50% degradation, 10% of hardness retention was chosen as the termination index.
Źródło:
Archives of Electrical Engineering; 2017, 66, 3; 475-484
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Decoupling control for permanent magnet in-wheel motor using internal model control based on back-propagation neural network inverse system
Autorzy:
Li, Y.
Zhang, B.
Xu, X.
Powiązania:
https://bibliotekanauki.pl/articles/200933.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electric vehicle
permanent magnet in-wheel motor
back-propagation neural network
inverse system
internal model control
pojazd elektryczny
silnik z napędem na magnesy stałe
inwersja systemu
propagacja wsteczna
model odwrotny
system odwrotny
Opis:
The permanent magnet in-wheel motor (PMIWM) is a nonlinear, multivariable, strongly coupled and highly complex system. The key to the development and application of the PMIWM consists in the improvement of its control accuracy and dynamic performance. In order to effectively decouple the PMIWM, this paper presents a novel internal model control (IMC) approach based on the back-propagation neural network inverse (BPNNI) control method. First, theoretical analysis is conducted to show the existence of the PMIWM inverse system, to be modeled mathematically. The inverse system approximated and identified by the back-propagation neural network (BPNN) constitutes the back-propagation neural network inverse (BPNNI) system. Then, by cascading the BPNNI system on the left side of the original PMIWM system, a new decoupling, pseudo-linear system is established. Moreover, the 2-DOF internal model control (IMC) method is employed to design the extra closed-loop controller that further improves disturbance rejection and robustness of the whole system. Consequently, the proposed decoupling control approach incorporates the advantages of both the BPNNI and the IMC. Effectiveness of thus proposed control approach is verified by means of simulation and real-time hardware-in-the-loop (HIL) experiments.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2018, 66, 6; 961-972
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental study on triboelectrostatic beneficiation of wet fly ash using Microwave Heating
Autorzy:
Li, H.
Chen, Y.
Zhang, X.
Zhao, Y.
Tao, Y.
Li, C.
He, X.
Powiązania:
https://bibliotekanauki.pl/articles/110399.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
wet fly ash
triboelectrostatic beneficiation
microwave heating
efficiency
Opis:
Triboelectrostatic beneficiation, as a physical method, of fly ash cannot only meet the technical requirements of fly ash application but also recycle of an unburned carbon as a useful energy source. The aim of this study was to investigate the feasibility of improving efficiency of triboelectrostatic beneficiation of wet fly ash using microwave heating. The wet fly ash with different moisture contents had an average loss-on-ignition of 12.56%. The fly ash samples were heated in a microwave oven before the experiments. The experimental conditions were electric field voltage of 40 kV and air flux ranging from 12 to 30 m3/h. The influence of the microwave heating on the wet fly ash triboelectrostatic beneficiation was discussed under the conditions of different microwave intensity and irradiation time. The results indicated that the removal rate and recycle rate of the unburned carbon showed a significant increase performance as the wet fly ash was processed by the microwave heating which was attributed to changes of moisture contents and dielectric constants caused by the microwave heating. The feasibility had been verified according to the experimental study on fly ash with different moisture contents. It can be concluded that the microwave heating process was efficiently applied for the wet fly ash triboelectrostatic beneficiation.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 328-341
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal stability and mechanical properties of hybrid materials based on nitrocellulose grafted by aminopropylisobutyl polyhedral oligomeric silsesquioxane
Stabilność termiczna i właściwości mechaniczne materiałów hybrydowych na bazie nitrocelulozy szczepionej oligomerycznym wielofunkcyjnym aminopropyloizobutylosilseskwioksanem
Autorzy:
Yang, X.
Wang, Y.
Li, Y.
Li, Z.
Song, T.
Liu, X.
Hao, J.
Powiązania:
https://bibliotekanauki.pl/articles/945783.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
nitrocellulose
hybrid material
aminopropylisobutyl polyhedral oligomeric silsesquioxane
thermal stability
mechanical properties
nitroceluloza
materiał hybrydowy
oligomeryczny wielofunkcyjny aminopropyloizobutylosilseskwioksan
stabilność termiczna
właściwości mechaniczne
Opis:
The need for improvement in nitrocellulose (NC) storage safety and convenience of application requires an increase in NC thermal stability and enhancement of its mechanical properties. To this aim, hybrid materials were synthesized by grafting NC with aminopropylisobutyl polyhedral oligomeric silsesquioxane (amino-POSS) using isophorone diisocyanate (IPDI) as a crosslinking agent. The structure and elemental composition of the resulting products were confirmed by Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (1H NMR and 29Si NMR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). It was found, based on the silicon mapping using energy dispersive X-ray spectroscopy (EDS), that amino-POSS was well dispersed in NC matrix. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) studies showed that hybrid amino-POSS-NC materials have higher thermal decomposition activation energy (Ea) compared to NC control sample. According to TGA results, the temperatures of 5 % weight loss (T5 %) and 50 % weight loss (T50 %) as well as the residual masses at 240 °C (CR240 °C), were increased as a result of NC modification with amino-POSS. As can be seen from the digital and scanning electron microscopy (SEM) images, the char layers of amino-POSS-NC hybrid materials after burning in air became more compact with increasing amino-POSS content. XPS studies have shown an increased content of the graphitized carbon in the char residues of the modified samples. The results of DSC, TGA, SEM and XPS studies have directly proved the enhancement of the thermal stability of amino-POSS-NC hybrid materials. In addition, tensile strengths and Young's moduli of amino-POSS-NC hybrid materials were increased gradually with the amino-POSS content in the uniaxial tensile tests. All these results show that the proposed modification of nitrocellulose improves the safety of manufacture and use of this material.
Poprawa bezpieczeństwa przechowywania nitrocelulozy (NC) wymaga zwiększenia jej stabilności termicznej, a wygoda używania poprawy właściwości mechanicznych. W tym celu zsyntetyzowano materiały hybrydowe, w których NC szczepiono oligomerycznym wielofunkcyjnym aminopropyloizobutylosilseskwioksanem (amino-POSS) stosując jako środek sieciujący izoforonodiizocyjanian (IPDI). Strukturę i skład otrzymanych materiałów potwierdzono za pomocą spektroskopii w podczerwieni z transformatą Fouriera (FT-IR), jądrowego rezonansu magnetycznego (1H NMR i 29SiNMR), dyfraktometrii rentgenowskiej (XRD) oraz spektroskopii fotoelektronów rentgenowskich (XPS). Na podstawie wyników badań mapowania Si, otrzymanych metodą spektroskopii dyspersji energii promieniowania rentgenowskiego (EDS), stwierdzono, że amino-POSS został dobrze zdyspergowany w matrycy NC. Badania stabilności termicznej przeprowadzone za pomocą różnicowej kalorymetrii skaningowej (DSC) wykazały, że materiały hybrydowe typu amino-POSS-NC charakteryzują się większymi wartościami energii aktywacji rozkładu termicznego (Ea) niż próbka kontrolna NC. Zgodnie z wynikami analizy termograwimetrycznej (TGA) wartości temperatury ubytku 5 % (T5 %) i 50% (T50 %) masy próbki oraz pozostałości masy w temperaturze 240 °C (CR240 °C) zwiększały się na skutek modyfikacji NC za pomocą amino-POSS. Według fotografii cyfrowych i fotografii wykonanych metodą skaningowej mikroskopii elektronowej (SEM) warstwy węglowe powstałe po spaleniu materiałów hybrydowych w powietrzu wraz ze zwiększeniem zawartości amino-POSS stawały się coraz bardziej zwarte, a wyniki badań XPS wykazały, że tworzyło się coraz więcej węgla w postaci grafitu. Wszystkie wyniki DSC, TGA, SEM i XPS dowodzą poprawy stabilności termicznej materiałów hybrydowych amino-POSS-NC. Stwierdzono także, że wytrzymałość na rozciąganie i moduł Young'a podczas prób jednoosiowego rozciągania materiałów hybrydowych rosną ze zwiększaniem się zawartości amino-POSS. Wyniki wszystkich przeprowadzonych badań dowodzą, że zaproponowana modyfikacja NC poprawia bezpieczeństwo wytwarzania i użytkowania tych materiałów w porównaniu z niemodyfikowanym NC.
Źródło:
Polimery; 2017, 62, 7-8; 576-587
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nonlinear inverse solution by the look-up table method for Risley-prism-based scanner
Autorzy:
Li, A.
Sun, W.
Gao, X.
Powiązania:
https://bibliotekanauki.pl/articles/173899.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
risley prism
lookup table method
inverse solution
scanner
Opis:
A pair of rotation Risley prisms can perform superior optical pointing and tracking functions with large visual field and high accuracy. Crucial to the function implementation are the nonlinear inverse solutions to the double-prism orientation angles for tracking a given target trajectory. In the paper, a novel look-up table method is proposed to solve this problem. Because there are two groups of solutions to the rotation angles achieved from an arbitrary target point, a "jump" phenomenon occurs and generates the discontinuous curves of multi-group rotation angle solutions. According to the mapping relation between the coordinate values of the target point and the corresponding rotation angles of two prisms, we can establish the continuous solution curves by adding constraints and employing an optimization algorithm. Experimental results validate the obtained inverse solutions applicable to scan a trajectory close to the given one within an error threshold. The proposed look-up table method can provide foundation for the continuous control of the Risley-prism-based scanner in its inverse applications.Keywords: Risley prism, look-up table method, inverse solution, scanner.
Źródło:
Optica Applicata; 2016, 46, 4; 501-515
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies