Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Yu, J.-H." wg kryterium: Autor


Wyświetlanie 1-38 z 38
Tytuł:
Effect of Heat Treatment on Microstructure and Impact Toughness of Ti-6Al-4V Manufactured by Selective Laser Melting Process
Autorzy:
Lee, K.-A.
Kim, Y.-K.
Yu, J.-H.
Park, S.-H.
Kim, M.-C.
Powiązania:
https://bibliotekanauki.pl/articles/354570.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
selective laser melting
Ti-6Al-4V
microstructure
impact toughness
heat treatment
Opis:
This study manufactured Ti-6Al-4V alloy using one of the powder bed fusion 3D-printing processes, selective laser melting, and investigated the effect of heat treatment (650°C/3hrs) on microstructure and impact toughness of the material. Initial microstructural observation identified prior-β grain along the building direction before and after heat treatment. In addition, the material formed a fully martensite structure before heat treatment, and after heat treatment, α and β phase were formed simultaneously. Charpy impact tests were conducted. The average impact energy measured as 6.0 J before heat treatment, and after heat treatment, the average impact energy increased by approximately 20% to 7.3 J. Fracture surface observation after the impact test showed that both alloys had brittle characteristics on macro levels, but showed ductile fracture characteristics and dimples at micro levels.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1341-1346
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of The Desorption-Recombination Temperature On The Microstructure And Magnetic Properties Of HDDR Processed Nd-Fe-B Powders
Wpływ temperatury desorpcji-rekombinacji na mikrostrukturę i właściwości magnetyczne proszków Nd-Fe-B przetwarzanych metodą HDDR
Autorzy:
Lee, J.-G.
Cha, H.-R.
Liu, S.
Yu, J.-H.
Baek, Y.-K.
Kwon, H.-W.
Powiązania:
https://bibliotekanauki.pl/articles/353723.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Nd-Fe-B
HDDR
permanent magnet
grain boundary
metoda HDDR
magnes trwały
granica ziarna
Opis:
The effect of the desorption-recombination temperature on the microstructure and magnetic properties of hydrogenation-disproportionation-desorption-recombination (HDDR) processed Nd-Fe-B powders was studied. The NdxB6.4Ga0.3Nb20.2Febal (x=12.5-13.5, at.%) casting alloys were pulverized after homogenizing annealing, and then subjected to HDDR treatment. During the HDDR process, desorption-recombination (DR) reaction was induced at two different temperature, 810°C and 820°C. The higher Nd content resulted in enhanced coercivity of the HDDR powder, and which was attributed to the thicker and more uniform Nd-rich phase along grain boundaries. But this uniform Nd-rich phase induced faster grain growth. The remanence of the powder DR-treated at 820°C is higher than that DR-treated at 810°C. In addition, it was also confirmed that higher DR temperature is much more effective to improve squareness.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1499-1501
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Growth and Characterization of Vanadate Laser Crystals
Autorzy:
Yu, H.
Zhang, H.
Wang, J.
Powiązania:
https://bibliotekanauki.pl/articles/1399465.pdf
Data publikacji:
2013-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.10.Fq
42.55.Px
Opis:
Based on the invention and widely application of the Czochralski pulling method, vanadate crystals have been grown and commercialized in recent decades. In this paper, the growth and characterization of a series of neodymium doped vanadate crystals have been reviewed, including $Nd:YVO_4$, $Nd:GdVO_4$, and $Nd:LuVO_4$. The excellent thermal-mechanical and laser property make them to be used in many respects.
Źródło:
Acta Physica Polonica A; 2013, 124, 2; 301-304
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design Of A Bi-Functional α-Fe2O3/Zn2SiO4:Mn2+ By Layer-By-Layer Assembly Method
Projektowanie dwufunkcyjnych proszków α-Fe2O3/Zn2SiO4:Mn2+ metodą warstwa po warstwie
Autorzy:
Yu, R.
Yun, J.
Pee, J-H.
Kim, Y.
Powiązania:
https://bibliotekanauki.pl/articles/352623.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
red pigment
α-Fe2O3
Zn2SiO4:Mn2+ layer
phosphor
bi-functional
czerwony pigment
Zn2SiO4: Mn2+
fosfor
proszki dwufunkcyjne
Opis:
This work describes the design of bi-functional α-Fe2O3/Zn2SiO4:Mn2+ using a two-step coating process. We propose a combination of pigments (α-Fe2O3) and phosphor (Zn2SiO4:Mn2+ ) glaze which is assembled using a layer-by-layer method. A silica-coated α-Fe2O3 pigment was obtained by a sol-gel method and a Zn2+ precursor was then added to the silica-coated α-Fe2O3 to create a ZnO layer. Finally, the Zn2SiO4:Mn2+ layer was prepared with the addition of Mn2+ ions to serve as a phosphor precursor in the multi-coated α-Fe2O3, followed by annealing at a temperature above 1000°C. Details of the phase structure, color and optical properties of the multi-functional α-Fe2O3/Zn2SiO4:Mn2+ were characterized by transmission electron microscopy and X-ray diffraction analyses.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1165-1167
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impacts of BSMV on vegetative growth and water status in hulless barley (Hordeum vulgare var. nudum) in VIGS study
Autorzy:
Liang, J.
Chen, X.
Zhao, H.
Yu, S.
Long, H.
Deng, G.
Pan, Z.
Yu, M.
Powiązania:
https://bibliotekanauki.pl/articles/57548.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
Hordeum vulgare var.nudum
hulled barley
barley
BSMV zob.barley stripe mosaic virus
barley stripe mosaic virus
vegetative growth
water status
VIGS zob.virus induced gene silencing method
virus induced gene silencing method
Opis:
Barley stripe mosaic virus (BSMV) is an established and extensively used virus-induced gene silencing (VIGS) vector for gene function analysis in monocots. However, the phenotypes generated by targeted gene silencing may be affected or masked by symptoms of BSMV infection. To better understand the potential effects of BSMV-VIGS in hulless barley (Hordeum vulgare var. nudum), the accumulation pattern of BSMV and its impacts on vegetative growth and water status were investigated. The results indicated that the vegetative growth of infected plants was significantly and continuously impacted by BSMV from 10 to 40 days post inoculation (dpi). When the accumulation of BSMV was extremely high (7 to 11 dpi), infected plants displayed twisted leaf tips with an increased water lose rate (WLR) and decreased water content (WC). Virus accumulation declined and stabilized after 25 dpi, at this stage, the WLR and WC were unaffected in the infected plants. The efficiency of VIGS was tested by the silencing of Phytoene desaturase (PDS). RT-qPCR indicated that BSMV-VIGS can be sustained with good efficiency for up to 40 dpi under an altered condition with lower temperature (22 ±1°C) and higher relative humidity (70 ±10%). It was concluded that 25 to 40 dpi was the appropriate time zone for drought-related gene analysis by BSMV-VIGS under such condition.
Źródło:
Acta Societatis Botanicorum Poloniae; 2015, 84, 1
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Anti-pruritic effect of topical capsaicin against histamine-induced pruritus on canine skin
Autorzy:
Bae, S.
Yu, J.
Jeong, H.
Oh, T.
Powiązania:
https://bibliotekanauki.pl/articles/2087602.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
anti-pruritic effects
capsaicin
dog
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 4; 789-796
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis on Rib-tubes of seawater open rack vaporizer with the spoiler lever
Autorzy:
Su, H.
Yu, S.
Fan, J.
Xing, W.
Powiązania:
https://bibliotekanauki.pl/articles/258810.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
spoiler lever
Open Rack Vaporizer(ORV)
Rib-tubes
numerical simulation
Opis:
In order to explore a more reasonable structure and operating parameter, guide the design and improve the gasification of seawater Open Rack Vaporizer (ORV), Research on the rules of seawater that flows and heat transfer in the ORV tube was studied in this paper. By simplifying the model, heat transfer tube model with spoiler lever was obtained and simulated, the distribution of temperature field, gas ratio, velocity field and press field in rib tube were analyzed, and different inlet velocity of LNG, roughness of the tube wall both effected on the overall gasification, the results shows that the actual gasification efficiency from heat transfer tube is higher than normal, small difference of gas ratio outlet, velocity and temperature are both lower, LNG could be easer gasified at operating temperature between -162°C~+3°C than that between -162°C~+0°C.
Źródło:
Polish Maritime Research; 2017, S 2; 14-21
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design method of winch driven by contactless magnetic coupling under deepwater
Autorzy:
Zhang, B.
Wang, Z.
Wang, T.
Yu, H. J.
Powiązania:
https://bibliotekanauki.pl/articles/258870.pdf
Data publikacji:
2015
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
magnetic coupling
winch
graph analysis
CAD
Opis:
Through the combination subject of scientific research, the design method of the winch driven by contactless magnetic coupling is researched for the core purpose of the turning shaft sealing in a deepwater environment. This method has six design phases, including domestic and foreign information query and retrieval, graphic analyses of relevant structures, innovative design of 2D assembly sketches, a theoretical computation of structure parameters, the 3D modeling and motion simulation and engineering drawing. This method is of generality, which can provide examples for the postgraduate students and engineering personnel in self-renovation design of scientific research.
Źródło:
Polish Maritime Research; 2015, S 1; 95-99
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Strengthening and toughening mechanisms for polypropylene/Glass fiber composite foams under three-phase coexistence
Mechanizmy wzmacniające i utwardzające pianki kompozytowe polipropylen/włókno szklane w warunkach współistnienia trzech faz
Autorzy:
Gong, W.
Yu, J.
Fu, H.
Zhang, C.
He, L.
Powiązania:
https://bibliotekanauki.pl/articles/947491.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
polypropylene
composite
foam
mechanical properties
polipropylen
kompozyt
pianka
właściwości mechaniczne
Opis:
Composite foams were obtained through a two-step molding process in an injection molding machine. Gas phase was introduced into the mixture of molten polypropylene (PP) and solid glass fiber (GF). The interfacial behavior was investigated, and the strengthening and toughening mechanisms for PP/GF composites under three-phase coexistence were discussed. The incorporation of gas phase significantly increased the tensile strength by 112 % and impact toughness by 105 % in comparison to its unfoamed counterpart. The resulting mechanical properties of the PP/GF composite foams were found to depend considerably on the coexistence state of solid (GF) and gas (cells) phases and the cell structure of the foams.
Pianki kompozytowe otrzymano w dwustopniowym procesie formowania wtryskowego. Fazę gazową wprowadzano do mieszaniny stopionego polipropylenu (PP) ze stałymi włóknami szklanymi (GF). Badano właściwości mechaniczne otrzymanych pianek PP/GF oraz omówiono mechanizmy powodujące wzmacnianie i utwardzanie tych pianek w warunkach współistnienia trzech faz. Zaobserwowano, że wprowadzenie fazy gazowej znacznie zwiększa wytrzymałość na rozciąganie (o 112 %) i udarność pianki (o 105 %) w porównaniu z wartościami otrzymanymi w przypadku jej niespienionego odpowiednika. Stwierdzono, że właściwości mechaniczne pianek kompozytowych PP/GF w znacznym stopniu zależą od stanu współistnienia fazy stałej (GF) i gazowej (pory) oraz struktury komórkowej pianki.
Źródło:
Polimery; 2015, 60, 7-8; 457-461
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Piezoelectric effect on thermoelastic Lamb waves in functionally graded plates
Autorzy:
Wang, X.
Ren, X.
Yu, J.
Zhou, H.
Zhang, X.
Leng, J
Powiązania:
https://bibliotekanauki.pl/articles/38695708.pdf
Data publikacji:
2023
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
thermoelastic wave
attenuation
FGM
piezoelectric effect
physical field distributions
Opis:
Based on the Lord–Shulman thermoelectric elasticity theory, the piezoelectric effect on the thermoelastic Lamb wave propagation in the functionally graded material (FGM) plate is investigated. The coupled wave equations are solved by employing the Legendre polynomial series approach (LSPA), which poses the advantages of small scale of eigenvalues matrix and a convenient solution. It can directly obtain the complex wave number solutions without iteration. The obtained complex solutions, which represent the wave propagation and attenuation, are compared with those available data. Numerical examples show that the influence of gradient is profound. Results indicate that the piezoelectric effects on attenuation with the open and closed circuit condition are consistent for the S0 and S1 modes, but are inconsistent for the A0 and A1 modes. Although the piezoelectric effect is weak on the dispersion and attenuation of thermal waves, it is notable for their physical field distributions. In addition, the relaxation time is critical to electric displacements of a thermal wave mode, but is not essential for those of Lamb-like modes. The results can be used for the optimization of thermo-electric-elastic coupling structures.
Źródło:
Archives of Mechanics; 2023, 75, 1-2; 3-26
0373-2029
Pojawia się w:
Archives of Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polarization dependence of patterning effects in quantum well semiconductor optical amplifier-based wavelength conversion
Autorzy:
Qin, C
Shen, W
Zhao, J.
Yu, H.
Xu, E
Powiązania:
https://bibliotekanauki.pl/articles/173469.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
semiconductor optical amplifiers
polarization
patterning effect
Opis:
In this paper, polarization dependence of patterning effects in quantum well semiconductor optical amplifier-based wavelength conversion is experimentally and theoretically investigated. The carrier and photon density rate equations are numerically solved by using the time-domain traveling wave model. The material gain calculation, including the strain effect in the active layer, is based on the k·p method. By comparing experimental and computational results, it is demonstrated that the polarization of the injection signal has a significant influence on the gain recovery time of quantum well semiconductor optical amplifier. Under the cross-polarized signals injection, the output signals suffer the weakest and strongest patterning effects both for unstrained and tensile strained quantum well semiconductor optical amplifiers.
Źródło:
Optica Applicata; 2015, 45, 2; 163-172
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exchange Bias in Ni-Mn-Sn Heusler Alloy Films
Autorzy:
Gościańska, I.
Załęski, K.
Głowiński, H.
Kudryavtsev, Yu.
Dubowik, J.
Powiązania:
https://bibliotekanauki.pl/articles/1427549.pdf
Data publikacji:
2012-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.70.Ak
75.30.Et
Opis:
We report a relatively large exchange bias effect observed for the first time in Ni-Mn-Sn thin films with different microstructure and composition: a $Ni_{50}Mn_{36}Sn_{14}$ epitaxial film (A), a $Ni_{50}Mn_{43}Sn_7$ film which is phase decomposed (B), and a $NiMn//Ni_{50}Mn_{25}Sn_{25}$ bilayer (C). Despite the samples differ markedly in both microstructure and composition $H_{EB}$ does not substantially differs at 5 K. Exchange bias decreases with increasing T approximately as $H_{EB}$ (T) ∝ $H_{EB}$ (5K)/T with $H_{EB}$ (5K) of 180 Oe and 60 Oe for sample B and C, respectively and almost linearly for sample A with $H_{EB}$ (5K) = 65 Oe. Blocking temperature where the exchange bias vanishes is 40, 50 and 80 K for sample A, C and B, respectively. The results suggest that the role of AFM/FM interfaces is not substantial in formation of exchange bias in Ni-Mn-Sn Heusler alloy films and exchange bias is rather related to AFM/FM interactions in nanoscale.
Źródło:
Acta Physica Polonica A; 2012, 121, 5-6; 1179-1181
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Advanced Characterization of Material Properties on the Nanometer Scale Using Atomic Force Microscopy
Autorzy:
Fenner, M.
Wu, S.
Yu, J.
Huber, H.
Kienberger, F.
Powiązania:
https://bibliotekanauki.pl/articles/1490089.pdf
Data publikacji:
2012-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
77.55.-g
07.79.-v
68.37.Ps
68.37.Uv
07.57.Pt
Opis:
We report recent advances in material characterization on the nanometer scale using scanning microwave microscopy. This combines atomic force microscopy and a vector network analyzer using microwave tip sample interaction to characterize dielectric and electronic material properties on the nanometer scale. We present the methods for calibration as well as applications. Scanning microwave microscopy features calibrated measurements of: (1) capacitance with attofarad sensitivity. For calibration a well characterized array of capacitors (0.1 fF to 10 fF) is used. The method is applied to determine the dielectric properties of thin organic films, (2) Semiconductor dopant density. Calibration is performed by imaging the cross-section of a standard sample with differently doped layers (dopant stair case) from $10^{16}$ atoms/$cm^3$ to $10^{20}$ atoms/$cm^3$.
Źródło:
Acta Physica Polonica A; 2012, 121, 2; 416-419
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sensitive detection of acetylene by second derivative spectra with tunable diode laser absorption spectroscopy
Autorzy:
Deng, H.
Sun, J.
Li, P.
Liu, Y.
Yu, B.
Li, J.
Powiązania:
https://bibliotekanauki.pl/articles/174963.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
tunable diode laser absorption spectroscopy
TDLAS
signal processing
Savitzky–Golay filter
trace gas detection
Opis:
A tunable diode laser absorption spectrometer was developed for trace acetylene gas analysis, the system performance was evaluated by combing an appropriate digital signal processing methods, i.e., Savitzky–Golay smoothing and differentiation algorithm. The calculation of the derivative spectra by this method is accompanied by simultaneous data smoothing. Based on the 2nd deriv- ative spectra detection method, the Allan variance technique indicates a C2H2 detection limit of 1.7ppm for 1-s averaging time, and a minimum noise level of 62ppb (parts per billion), at the optimum integration time of ~60s. The calculated 2nd derivative spectra with better resolution, lower detection limits, save signal processing time, and improve the ability to distinguish unresolved spectral signals.
Źródło:
Optica Applicata; 2016, 46, 3; 353-363
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reliability analysis of gear transmission with considering failure correlation
Analiza niezawodności przekładni z uwzględnieniem korelacji uszkodzeń
Autorzy:
Zuo, F.-J.
Yu, L.
Mi, J.
Liu, Z.
Huang, H.-Z.
Powiązania:
https://bibliotekanauki.pl/articles/301845.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
Reliability analysis
contact stress
bending stress
multiple failure modes
failure correlation
analiza niezawodności
naprężenie stykowe
naprężenie zginające
mnogie przyczyny uszkodzeń
korelacja uszkodzeń
Opis:
Reliability analysis is of great importance in engineering practices. However, reliability analysis of mechanical system under considering correlation for multiple failure modes is very difficult. Gear is the key component in many mechanical transmission systems and therefore its reliability analysis is very important. Based on the standards of strength calculation of gears and stressstrength interference theory as well as copula theory, the reliability of gear transmission with three failure modes, including gear bending fatigue, gear flank contact fatigue and flank adhesion, is analyzed. The correlation of the three failure modes is studied and reliability of their correlation is also evaluated based on the selected copula functions. The proposed method can be used to facilitate the design, manufacturing, and maintenance planning of gears.
Analiza niezawodności ma ogromne znaczenie w praktyce inżynierskiej. Jednakże, analiza niezawodności układu mechanicznego z uwzględnieniem korelacji dla mnogich przyczyn uszkodzeń jest trudnym zadaniem. Koło zębate jest kluczowym elementem w wielu przekładniach mechanicznych i dlatego analiza jego niezawodności jest niezwykle ważna. W oparciu o normy obliczania wytrzymałości kół zębatych i teorię interferencji naprężeń i wytrzymałości, a także teorię kopuł, przeanalizowano niezawodność przekładni zębatej uwzględniając trzy przyczyny uszkodzeń: zmęczenie zginające koła zębatego, zmęczenie stykowe boku zęba i przyczepność boku. Prześledzono korelację trzech przyczyn uszkodzeń i oceniono niezawodność ich korelacji na podstawie wybranych funkcji kopuł. Proponowana metoda może być stosowana w celu ułatwienia projektowania, produkcji i planowania konserwacji przekładni.
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 4; 617-623
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quantitative Analysis of Cryomilled Nanocrystalline Ti-6Al-4V Alloy Powder by X-Ray Diffraction
Autorzy:
Oh, M.
Yu, H. K.
Lee, J.-H.
Oh, M. C.
Jung, S.-H.
Ahn, B.
Powiązania:
https://bibliotekanauki.pl/articles/356265.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanocrystalline
cryomilling
Ti alloy
X-ray diffraction
size-strain plot method
Opis:
A nanocrystalline Ti alloy powder was fabricated using cryomilling. The grain size and lattice strain evolution during cryomilling were quantitatively analyzed using X-ray diffraction (XRD) based on the Scherrer equation, Williamson-Hall (W-H) plotting method, and size-strain (S-S) method assuming uniform deformation. Other physical parameters including stress and strain have been calculated. The average crystallite size and the lattice strain evaluated from XRD analysis are in good agreement with the result of transmission electron microscopy (TEM).
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1439-1442
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
LMPP Effects on Morphology, Crystallization, Thermal and Mechanical Properties of iPP/LMPP Blend Fibres
Wpływ polipropylenu o małej masie cząsteczkowej (LMPP) na morfologię, krystalizację, właściwości termiczne i mechaniczne włókien mieszanych iPP/LMPP.
Autorzy:
Hussain, M.
Zhu, F.
Yu, B.
Han, J.
Memon, H.
Yasin, S.
Powiązania:
https://bibliotekanauki.pl/articles/232887.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
polypropylene
iPP/LMPP blends
morphology
crystallinity
low molecular low modulus polypropylene
polipropylen
mieszanki iPP-LMPP
morfologia
krystaliczność
niski poziom cząsteczkowy
polipropylen o niskim module sprężystości
Opis:
The thermal properties and morphological characterisation of isotactic polypropylene (iPP) homopolymer and its blends with low molecular low modulus polypropylene (LMPP) were studied. Firstly blends were prepared with variant LMPP contents, and their properties were characterised using SEM, DSC, XRD, and DMA. Later the mechanical properties of iPP/LMPP blend fibres were investigated. SEM results showed that the iPP/LMPP blends produced smoother surfaces when the LMPP content was increased, as well as the miscibility. All the Tg values with different LMPP percentages were in-between pure iPP and LMPP. The XRD results indicated the LMPP percentage decreased along with the degree of crystallinity of the iPP/LMPP blends (5% to 15%), which increased and then decreased as compared to pure iPP. The elongation at break increased when the LMPP content increased, with the maximum elongation at break of the LMPP 25% blend reaching 12.95%, which showed great stretch-ability, whereas the elastic modulus of iPP/LMPP blends decreased.
W pracy badano właściwości termiczne i morfologię homopolimeru izotaktycznego polipropylenu (iPP) i jego mieszanek z polipropylenem o małej masie cząsteczkowej (LMPP). Zastosowano następujące proporcje mieszania iPP/LMPP (wt/wt): 95/5, 90/10, 85/15, 80/20 i 75/25, zdefiniowano je odpowiedni: 5%, 10%, 15 %, 20% i 25%. Właściwości włokien mieszanych iPP/LMPP porównano do właściwości czystego PP i LMPP. Włókna mieszane zbadano za pomocą SEM, DSC, XRD i DMA. Następnie zbadano mechaniczne właściwości włókien iPP/LMPP. Wyniki SEM wykazały, że wraz ze zwiększeniem zawartości LMPP powierzchnia włókien charakteryzowała się większą gładkością. Wszystkie wartości Tg włókien mieszanych były pośrednie pomiędzy czystym iPP i LMPP. Stwierdzono, że wydłużenie przy zerwaniu zwiększyło się wraz ze wzrostem zawartości LMPP, przy maksymalnym wydłużeniu przy zerwaniu 12,95%, dla włókien z zawartością 25% LMPP, co wskazywało na dużą rozciągliwość, podczas gdy moduł sprężystości wzdłużnej włókien iPP / LMPP zmniejszył się.
Źródło:
Fibres & Textiles in Eastern Europe; 2018, 2 (128); 26-31
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Functional Properties and Electromagnetic Shielding Behaviour of Elastic Warp-knitted Fabrics
Właściwości funkcyjne i ekranowanie elektromagnetyczne elastycznych dzianin kolumienkowych
Autorzy:
Yu, Z. C.
He, H. L.
Lu, Y. H.
Zhang, J. F.
Lou, C. W.
Chen, A. P.
Lin, J. H.
Powiązania:
https://bibliotekanauki.pl/articles/232038.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
functional properties
electromagnetic shielding effectiveness
protective clothing
elastic warp-knitted fabric
electromagnetic wave
właściwości funkcjonalne
skuteczność ekranowania elektromagnetycznego
odzież ochronna
elastyczna osnowa-dzianina
fala elektromagnetyczna
Opis:
An investigation was made on the electromagnetic shielding behaviour and other functional properties for manufactured multifunctional elastic warp-knitted fabrics. Bamboo charcoal polyester/Crisscross-section polyester (BC-PET/CSP) blended yarns were used as the back of the warp-knitted fabric while conductive composite yarns were used as the front. The variation in the far infrared emissivity and anion density of elastic-warp knitted fabrics produced with different proportions of BC-PET content were studied in detail. Moreover the electromagnetic shielding effectiveness (EMSE) of the fabrics with different elongation was measured in this study. The experimental results showed that increased elongation almost did not significantly affect the EM shielding behaviour of fabric K1 in the elongation range of 0 - 40%. Finally to increase the EMSE of the fabric, the lamination method was used in this study. EMSE measurement results showed that two layer K1 warpknitted fabrics with 90° interval displayed a better shielding effect against the EM wave compared to that with a 0° interval.
Przeprowadzono badania właściwości ekranujących przed polem elektromagnetycznym i innych właściwości funkcyjnych wyprodukowanych wielofunkcyjnych elastycznych dzianin kolumienkowych. Zastosowano przędze kompozytowe z mieszanek zawierających drut ze stali kwasoodpornej, ciągłe włókna poliamidowe i poliestrowe oraz cięte włókna ze regenerowanej celulozy z surowca bambusowego. Badano emisyjność w dalekiej podczerwieni i gęstość anionową dzianin kolumienkowych wytworzonych przy rożnych proporcjach zastosowanych składników. Poza tym badano efektywność ochrony elektromagnetycznej dzianin przy rożnych wydłużeniach. Wyniki eksperymentów pokazują, że zwiększone wydłużenie prawie nie wpływa istotnie na właściwości ekranujące. Dla zwiększenia efektu ekranowania zastosowano metodę laminacji.
Źródło:
Fibres & Textiles in Eastern Europe; 2015, 5 (113); 78-83
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of float-sink and progressive release flotation of ground products of coal middlings
Autorzy:
Xie, W.
He, Y.
Luo, C.
Zhang, X.
Li, H.
Yu, J.
Wang, H.
Shi, F.
Powiązania:
https://bibliotekanauki.pl/articles/109500.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
coal middlings
float-sink
progressive release flotation
XPS
EDX
Opis:
An additional recovery of coking coal middlings can be utilized for increasing of the concentrate yield of coking coal. A combined flow sheet of comminution and flotation can realize this target. To investigate the effect of grinding process on further flotation of ground products, progressive release flotation tests were used to compare with the float-sink tests, which were regarded as a criterion. Coal middlings were ground by wet-milling with iron balls to <0.5 mm. Curves of ash vs. cumulative yields of sized products indicated that the concentrate yield of coal separated by progressive release flotation was lower than that of coal benefited by the float-sink test, with the same ash for four size fractions (0.5-0.25 mm, 0.25-0.125 mm, 0.125-0.074 mm and <0.074 mm). Distributions of elements conducted by energy disperse spectroscopy (EDX) showed that associated kaolinite was liberated and exposed on the surface. It led to the shift of local surface property from hydrophobicity to hydrophilicity. Meanwhile, analyses of chemical property performed by an X-Ray photoelectron spectrometer (XPS) depicted that the hydrophilic mineral FeOOH, which generated in the grinding process, was adsorbed on the coal surface. Flotation of the ground products were worsened due to the increase of hydrophilicity of the coal surface.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 2; 675-684
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Theoretical Studies of a New Insensitive Explosive, 2’-Methyl-3-nitro-2’H-[1,3’-bi(1,2,4-triazole)]-5,5’-diamine
Autorzy:
Luo, J.
Liu, Y.
Wang, J.
Chai, T.
Yuan, J.
Chang, S.
Yu, Y.
Jing, S.
Ma, H.
Powiązania:
https://bibliotekanauki.pl/articles/358633.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
insensitive explosive
synthesis
theoretical studies
density functional theory
new 1,2,4-triazole derivative
Opis:
A new insensitive energetic material 2’-methyl-3-nitro-2’H-[1,3’-bi(1,2,4-triazole)]-5,5’-diamine (1) was prepared by a three-step synthesis from commercially available chemicals. The energetic title compound was comprehensively characterized by various means, including FT-IR, multinuclear (1H, 13C, 14N) NMR spectroscopy, elemental analysis, HPLC and thermal analysis. The sensitivities of the synthesized material towards various external stimuli (impact, friction) were determined according to the BAM method. The optimized structure and related thermodynamic parameters were obtained at the DFT-B3LYP/6-31+G** theoretical level. The detonation properties of the material were also predicted according to the Kamlet-Jacobs formulae and the Monte-Carlo method. The results show that the density, heat of formation, detonation velocity, detonation pressure, impact sensitivity and purity were 1.83 g/cm3, 369 kJ/mol, 7.52 km/s, 25.4 GPa, 82.3 J and 97.7%, respectively. In addition, the compound was an insensitive high explosive which could meet the requirements of high energetic materials.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 2; 269-280
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of usefulness of the mems-based integrated navigation unit in car navigation
Autorzy:
Uradziński, M.
Rapiński, J.
Tomaszewski, D.
Śmieja, M.
Guo, H.
Yu, S.
Jian, X.
Powiązania:
https://bibliotekanauki.pl/articles/298138.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
MEMS
inertial navigation
GNSS
GNSS/IMU integration
car navigation
Opis:
Due to the development of MEMS, there is an opportunity to build a low-cost integrated navigation systems, operating independently of horizon visibility. This paper presents the proposal of an integrated GPS/IMU platform using MEMS technology. In order to verify the performance of a system built at the University of Warmia and Mazury, an experiment was conducted. In this experiment a precise Javad GNSS receiver, commercial grade GPS/IMU XW – ADU5660 and own-built system were used. The experiment was conducted to compare the results obtained from self built device with the working military integrated navigation unit. During the study all three devices were mounted inside moving vehicle. The car drove route inside the Kortowo campus, during which, all equipment performed measurements. Then, the results from both integrated systems were compared with RTK (Real Time Kinematic) results from Javad receiver. Experiments prove that the performance of own device is comparable to the commercial device.
Źródło:
Technical Sciences / University of Warmia and Mazury in Olsztyn; 2017, 20(4); 321-331
1505-4675
2083-4527
Pojawia się w:
Technical Sciences / University of Warmia and Mazury in Olsztyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetic research of quinoline, pyridine and phenol adsorption on modified coking coal
Autorzy:
Sun, X.
Xu, H.
Wang, J.
Ning, K.
Huang, G.
Yu, Y.
Ma, L.
Powiązania:
https://bibliotekanauki.pl/articles/110365.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
adsorption kinetics
modification
coking coal
coking wastewater
Opis:
Adsorption is widely used in wastewater treatment. In this work, the removal of quinoline, pyridine and phenol from coking wastewater by using modified coking coal, which was treated by four different modification methods i.e. acidification sodium hydroxide (5 mol/dm3), hydrochloric acid (5 mol/dm3) and acetic acid (5 mol/dm3) and low-temperature (105 oC) oxidation, was investigated. The modified coal was characterized by the surface area analysis, SEM, total acidity and basicity and FT-IR. The results showed that the surface area from high to low follows the order: modification with acetic acid, modification with hydrochloric acid, raw coal, modification with sodium hydroxide and modification with low-temperature. Experimental data were fitted to pseudo-first-order, pseudo-second-order and intra-particle diffusion. The adsorption of all followed pseudo-second-order kinetics. The result showed that the removal efficiency of coal modified by hydrochloric acid and acetic acid are higher than raw coal, while modified by sodium hydroxide and low-temperature are lower than raw coal., The coal modified by hydroxide acid had the best adsorption capacity.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 965-974
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Opracowanie i walidacja skuteczności produktów fermentowanych na bazie Bacillus jako alternatywy dla antybiotyków u zwierząt domowych
Autorzy:
Cheng, Y.-H.
Horng, Y.-B.
Chen, W.-J.
Hua, K.-F.
Dybus, A.
Hsiao, F.S.-H.
Yu, Y.-H.
Powiązania:
https://bibliotekanauki.pl/articles/3136350.pdf
Data publikacji:
2021
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
domestic animal
antibiotics alternative
Bacillus-based fermented products
validation
efficacy
Źródło:
Acta Scientiarum Polonorum. Zootechnica; 2021, 20, 3; 23-34
1644-0714
Pojawia się w:
Acta Scientiarum Polonorum. Zootechnica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Expression of IFN-λ1 from Congjiang pigs and its effect on anti-PRRSV proliferation
Autorzy:
Xin-qin, J.
Biao, W.
Zhi-qiang, D.
Yong, R.
Yan, H.
Meng-qiu, H.
Shan-shan, D.
Yu-jie, T.
Powiązania:
https://bibliotekanauki.pl/articles/2087291.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
porcine ifn-λ1
porcine type III interferon
eukaryotic expression
anti-proliferation
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 3; 423-430
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electrical Transport and Magnetic Properties of La$\text{}_{2}\text{}_{/}\text{}_{3}$ Pb$\text{}_{1}\text{}_{/}\text{}_{3}$ MnO$\text{}_{3}$ Thin Films
Autorzy:
Baran, M.
Berkowski, M.
Fink-Finowicki, J.
Lewandowski, S. J.
Szymczak, H.
Szymczak, R.
Khartchev, S. I.
Medvedev, Yu. V.
Powiązania:
https://bibliotekanauki.pl/articles/2037109.pdf
Data publikacji:
2004
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.30.-m
72.15.Gd
75.70.Pa
Opis:
The magnetic and transport properties of epitaxial La$\text{}_{2}\text{}_{/}\text{}_{3}$ Pb$\text{}_{1}\text{}_{/}\text{}_{3}$ CuO$\text{}_{3}$ thin films deposited on SrLaGaO$\text{}_{4}$ substrate using dc magnetron sputtering technique are reported. The giant magnetoresistance effect (of about 50% at magnetic field of 1 T) was observed near the Curie temperature. Several mechanisms responsible for temperature dependence of resistivity are discussed. The effect of annealing was studied. It shifted the Curie temperature to the lower value, probably, because of the loss of oxygen.
Źródło:
Acta Physica Polonica A; 2004, 105, 1-2; 115-120
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Resonant State of 4f$\text{}^{14}\text{}^{/}\text{}^{13}$ Yb Ion in Pb$\text{}_{1-x}$Ge$\text{}_{x}$Te
Autorzy:
Grodzicka, E.
Dobrowolski, W.
Story, T.
Slynko, E. T.
Vygranenko, Yu.K.
Willekens, M. M. H.
Swagten, H. J. M.
de Jonge, W. J. M.
Powiązania:
https://bibliotekanauki.pl/articles/1950801.pdf
Data publikacji:
1996-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
71.55.Ht
75.20.Ck
Opis:
The study of transport and of magnetic properties of Pb$\text{}_{1-x}$Ge$\text{}_{x}$Te:Yb mixed crystals (0 ≤ x ≤ 0.04) is reported. It is shown that Yb forms a donor state resonant with the PbTe valence band. The donor state position may be tuned (shifted relative to the energy gap) by admixture of Ge. The properties of the Yb ion in the Pb$\text{}_{1-x}$Ge$\text{}_{x}$Te matrix makes the system unique from the point of view of magnetic properties. It is demonstrated that the change of the conductivity type from p to n induces transitions from the paramagnetic state to the diamagnetic one.
Źródło:
Acta Physica Polonica A; 1996, 90, 4; 801-804
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
iTRAQ-based quantitative proteomics analysis reveals inhibitory mechanismsof the antimicrobial peptide MDAP-2 against Salmonella gallinarum
Autorzy:
Zhang, Y.
Yu, S.
Ying, X.
Jia, B.
Liu, L.
Liu, J.
Kong, L.
Pei, Z.
Ma, H.
Powiązania:
https://bibliotekanauki.pl/articles/2087299.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Salmonella gallinarum
AMP
iTRAQ
inhibitory mechanism
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 3; 405-414
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bacterial communities in PM2.5 and PM10 in broiler houses at different broiler growth stages in spring
Autorzy:
Zhang, J.
Li, Y.
Xu, E.
Jiang, L.
Tang, J.
Li, M.
Zhao, X.
Chen, G.
Zhu, H.
Yu, X.
Zhang, X.
Powiązania:
https://bibliotekanauki.pl/articles/2087465.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bacterial communities
broilers
high-throughput sequencing
particulate matter
Źródło:
Polish Journal of Veterinary Sciences; 2019, 3; 495-504
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
17 beta-estradiol affects proliferation and apoptosis of canine bone marrow mesenchymal stem cells in vitro
Autorzy:
Zhou, Z.-H.
Gu, C.-W.
Li, J.
Huang, X.-Y.
Deng, J.-Q.
Shen, L.-H.
Cao, S.-Z.
Deng, J.-L.
Zuo, Z.-C.
Wang, Y.
Ma, X.-P.
Ren, Z.-H.
Yu, S.-M.
Powiązania:
https://bibliotekanauki.pl/articles/2087308.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
apoptosis
bone marrow mesenchymal stem cells (BMSCs)
canine
proliferation
17 beta-estradiol (E2)
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 2; 235-245
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pharmacokinetics of the recombinant ovine interferon-tau in lambs
Autorzy:
Zhao, J.
Yu, H.Y.
Zhao, Y.
Li, S.Q.
Fu, X.L.
Zhou, W.
Xia, B.B.
Wang, M.L.
Chen, J.
Powiązania:
https://bibliotekanauki.pl/articles/2087588.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bioavailability
ovine interferon-τ
cytopathic effect inhibition assay
pharmacokinetic study
Źródło:
Polish Journal of Veterinary Sciences; 2019, 1; 75-82
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimal expression and purification of sapelovirus A structural protein VP1, and its immunogenicity in mice
Autorzy:
Zhao, T.T.
Cui, L.
Chen, L.
Li, J.J.
Liang, Q.L.
Wu, P.J.
Yu, X.Q.
Zhang, Z.H.
Hua, X.G.
Powiązania:
https://bibliotekanauki.pl/articles/2087686.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sapelovirus A
prokaryotic expression
purification
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 3; 573-579
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magnetic Anisotropy in Eus-pbs Multilayers
Autorzy:
Story, T.
Swüste, C. H. W.
Swagten, H. J. M.
de Jonge, W. J. M.
Stachow-Wójcik, A.
Twardowski, A.
Arciszewska, M.
Dobrowolski, W.
Gałązka, R. R.
Sipatov, A. Yu.
Powiązania:
https://bibliotekanauki.pl/articles/2013042.pdf
Data publikacji:
2000-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.50.Pp
75.70.Ak
Opis:
We present the results of ferromagnetic resonance studies of the thickness dependence of magnetic anisotropy in 2 series of EuS-PbS multilayers grown on (111) BaF$\text{}_{2}$ and (100) KCl substrates with the EuS thickness varying in the range d=6-70 Å. The anisotropy constant K was found to follow the dependence K(d)=K$\text{}_{V}$+2K$\text{}_{S}$/d , with the surface term K$\text{}_{S}$ larger for layers grown on BaF$\text{}_{2}$ as compared to KCl. This difference is discussed in terms of different thermal stress-induced distortions of cubic crystal lattice of EuS. We found that the thickness of EuS layer required for the perpendicular (to the layer) magnetization is d ≤ 2-3 Å, i.e., it is below 1 monolayer.
Źródło:
Acta Physica Polonica A; 2000, 97, 3; 435-438
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of a SYBR Green I real-time PCR assay for detection of novel porcine parvovirus 7
Autorzy:
Li, Y.D.
Yu, Z.D.
Bai, C.X.
Zhang, D.
Sun, P.
Peng, M.L
Liu, H.
Wang, J.
Wang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/2087207.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Capsid gene
PPV7
SYBR Green I real-time PCR
Źródło:
Polish Journal of Veterinary Sciences; 2021, 24, 1; 43-49
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Temperature Dependence of Antiferromagnetic Interlayer Exchange Coupling in EuS-PbS Multilayers
Autorzy:
Chernyshova, M.
Kowalczyk, L.
Baran, M.
Szczerbakow, A.
Story, T.
Smits, C. J. P.
Filip, A. T.
Swagten, H. J. M.
de Jonge, W. J. M.
Sipatov, A. Yu.
Powiązania:
https://bibliotekanauki.pl/articles/2038129.pdf
Data publikacji:
2004-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.20.Ck
75.30.Et
Opis:
Antiferromagnetic interlayer exchange coupling in semiconductor EuS-PbS-EuS ferromagnetic trilayers grown on PbS (001) substrates with ultrathin (0.6-1.2 nm) nonmagnetic PbS spacers is studied by SQUID magnetometry and model calculations. Analysis of the experimentally observed magnetic field and temperature dependence of the magnetization of EuS-PbS structures reveals a rapid decrease in the interlayer coupling energy with increasing temperature indicating a temperature dependence of the microscopic coupling mechanism acting in these all-semiconductor ferromagnetic/nonmagnetic multilayers.
Źródło:
Acta Physica Polonica A; 2004, 105, 6; 599-605
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Relationship of adiponectin, leptin, visfatin and IGF-1 in cow’s venous blood and venous cord blood with calf birth weight
Autorzy:
Shen, L.
Zhu, Y.
Xiao, J.
Deng, J.
Peng, G.
Zuo, Z.
Yu, S.
Ma, X.
Zhong, Z.
Ren, Z.
Zhou, Z.
Liu, H.
Zong, X.
Cao, S.
Powiązania:
https://bibliotekanauki.pl/articles/2087491.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
adiponectin
leptin
IGF-1
birth weights
cow
Źródło:
Polish Journal of Veterinary Sciences; 2019, 3; 541-548
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magnetic and Structural Properties of EuS-PbS Multilayers Grown on n-PbS (100) Substrates
Autorzy:
Chernyshova, M.
Łusakowska, E.
Domukhovski, V.
Grasza, K.
Szczerbakow, A.
Wrotek, S.
Kowalczyk, L.
Story, T.
Smits, C. J. P.
Swagten, H. J. M.
De Jonge, W. J. M.
Palosz, W.
Sipatov, A. Yu.
Volobuev, V. V.
Powiązania:
https://bibliotekanauki.pl/articles/2035589.pdf
Data publikacji:
2002
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.20.Ck
75.30.Et
Opis:
Magnetic properties of semiconductor EuS(t)-PbS(d)-EuS(t) ferromagnetic trilayers (t=30÷300Å and d=7.5÷70Å) grown on n-type monocrystalline PbS (100) substrate were studied by SQUID magnetometry and ferromagnetic resonance technique yielding, in particular, the dependence of the ferromagnetic Curie temperature on the thickness of the EuS layer. Structural parameters of layers were examined by X-ray powder diffraction analysis. A high structural quality of the substrate and the multilayer was verified by the measurements of the X-ray rocking curve width indicating the values of the order of 100 arcsec and by atomic force microscopy revealing the presence on the cleft PbS surface regions practically flat in the atomic scale over the area of 1×0.1μm$\text{}^{2}$.
Źródło:
Acta Physica Polonica A; 2002, 102, 4-5; 609-615
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Scanning Tunneling Spectroscopy Study of Surface States of 3d Metals: Chemical Identification, Magnetic Contrast and Orbital Kondo Resonance States
Autorzy:
Bischoff, M. M. J.
Fang, C. M.
de Groot, R. A.
Heijnen, G. M. M.
Katsnelson, M. I.
Kolesnychenko, O. Yu.
de Kort, R.
Lichtenstein, A. I.
Quinn, A. J.
Vasquez de Parma, A. L.
Yamada, T. K.
van Kempen, H.
Powiązania:
https://bibliotekanauki.pl/articles/2036891.pdf
Data publikacji:
2003
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.20.-r
68.37.-d
75.70.-i
Opis:
The surface states of 3d transition metals are studied by scanning tunneling microscopy and scanning tunneling spectroscopy. The results show that surface states can be used for chemical identification with high spatial resolution. The spin polarized nature of the surface states allows us to obtain magnetic contrast in scanning tunneling miroscopy imaging with near atomic resolution. For Cr(100) we found that the surface state close to the Fermi level can be explained by an orbital Kondo resonance surface state.
Źródło:
Acta Physica Polonica A; 2003, 104, 3-4; 231-243
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of serum adiponectin and leptin in healthy perinatal dairy cows or cows with ketosis, and their effectson ketosis involved indices
Autorzy:
Shen, L.
Qian, B.
Xiao, J.
Zhu, Y.
Hussain, S.
Deng, J.
Peng, G.
Zuo, Z.
Zou, L.
Yu, S.
Ma, X.
Zhong, Z.
Ren, Z.
Wang, Y.
Liu, H.
Zhou, Z.
Cai, D.
Hu, Y.
Zong, X.
Cao, S.
Powiązania:
https://bibliotekanauki.pl/articles/2087289.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
adiponectin
dairy cows
ketosis
leptin
perinatal period
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 3; 373-381
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-38 z 38

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies