Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Ma, H." wg kryterium: Wszystkie pola


Tytuł:
Preparation of Temperature-Sensitive Polyurethanes Based on Modified Castor Oil
Otrzymywanie termowrażliwych poliuretanów na bazie zmodyfikowanego oleju rycynowego
Autorzy:
Bao, L.-H.
Ma, H.-T.
Powiązania:
https://bibliotekanauki.pl/articles/231815.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
modified castor oil
temperature-sensitive polyurethane
waterproof fabrics
breathable fabrics
zmodyfikowany olej rycynowy
termowrażliwe poliuretany
tkaniny wodoodporne
tkaniny oddychające
przepuszczalność pary wodnej
Opis:
A series of temperature-sensitive polyurethanes (TSPUs) with polytetrahydrofuran glycol (PTMG), poly(ethylene glycol) (PEG) and maleic anhydride modified castor oil (MCO) as soft segments were prepared in this paper. The morphology of the temperature-sensitive polyurethane films was characterised by SEM, DSC and WAXD. SEM studies were also carried out to investigate the surface structure of coated and uncoated fabrics. The water vapour permeability of the coated and uncoated fabrics were measured as well. The results showed that a nonporous TSPU layer was formed on the coated fabric surface. The tailor -made TSPUs had one to three soft segment crystal melting point temperatures, with the lower peak temperature Tpm1 belonging to the soft segment PTMG and the higher peak temperature Tpm2 to the hydropilic soft segment PEG2000. The water vapour permeability of TSPUs coated fabrics increased with an increase in PEG2000 concentration and PEG molecular weight, but decreased with an increase in the hard segment content, and triggered around the soft segment crystal melting point temperature of TSPUs.
W pracy otrzymano termowrażliwe poliuretany (TSPU) z glikolu politetrahydrofuranowego (PTMG), glikolu polietylenowego (PEG) i bezwodnika maleinowego zmodyfikowanego olejem rycynowym (MCO). Za pomocą SEM, DSC i WAXD zbadano morfologię termowrażliwych folii poliuretanowych. Przeprowadzono również badania SEM w celu zbadania struktury powierzchni powleczonych i niepowleczonych tkanin. Zmierzono także przepuszczalność pary wodnej powleczonych i niepowleczonych tkanin.
Źródło:
Fibres & Textiles in Eastern Europe; 2017, 3 (123); 34-39
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Control system design for multi-rotor MAV
Autorzy:
Wang, W.
Ma, H.
Sun, C.-Y.
Powiązania:
https://bibliotekanauki.pl/articles/280407.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
MAV
attitude control
altitude control
LQG
memory based control
Opis:
Abstract MAVs (Micro Air Vehicles) have attracted more and more attention in recent years because of their wide applications, such as investigations of inhospitable environment, nuclear or hazardous material polluted regions and other inaccessible areas. In this paper, both attitude and altitude controls of a Quad-Rotor type MAV are discussed and analyzed. To stabilize the attitude, one order memory based controller is selected, the performance of which is independent of the detail model information, leading to enhanced robustness. While for the altitude, a Linear Quadratic Gaussian (LQG) controller is proposed. The experimental results of the real flight demonstrate the stability and robustness of the controllers.
Źródło:
Journal of Theoretical and Applied Mechanics; 2013, 51, 4; 1027-1038
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A study on the sustainable management framework and the economic value evaluation for Taiwan reservoir watershed
Badania struktury zrownowazonej gospodarki oraz ocena wartosci ekonomicznej zlewni zbiornikow wodnych na Tajwanie
Autorzy:
Lu, S -H
Peng, S.-H.
Ma, H.-W.
Powiązania:
https://bibliotekanauki.pl/articles/81829.pdf
Data publikacji:
2010
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
sustainable management
economic value
Taiwan
reservoir
watershed
valuation method
Opis:
Recently lack of sustainable management for the reservoir watershed becomes a predicament for the water issues in Taiwan. The study tried to recognize the framework of the sustainable management of the Taiwan reservoir watershed and its key factors by using the analytic hierarchy process and the Delphi method. Through the identification questionnaires and the CVM (contingent valuation method), it also discussed the gap of expert and public for the identification of satisfaction, environmental protection and the potential value for the recent reservoir watershed. However, the results showed that the “natural stability” is the significant factor in the first level and the “Nature resources conservation” and “Water storage amount” are the most important factors for the detailed level. In addition, the expert opinions were not proved by public identification, and the present governance budgets are too low to respond to the potential values of public expectancy.
W pracy przedstawiono wyniki badań przeprowadzonych dla określenia hierarchii ważności czynników ekologicznych, ekonomicznych i socjalnych związanych ze zrównoważonym zagospodarowaniem zlewni zbiorników wodnych na Tajwanie. W badaniach zastosowano metodę ankietową, w której respondenci stosując pięciostopniową skalę mieli wskazać ważność 22 określonych przez ekspertów czynników związanych z ochroną i zrównoważonym korzystaniem z zasobów środowiska, wpływających na standard życia mieszkańców oraz możliwości rozwoju gospodarczego na obszarze zlewni zbiorników wodnych. Stwierdzono, że najważniejsze znaczenie dla ludności mają czynniki ekologiczne, w szczególności zapewnienie stabilności przyrodniczej poprzez zachowanie bioróżnorodności oraz ochrony zasobów naturalnych, w tym ilości retencjonowanej wody.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation; 2010, 42, 1; 219-225
0208-5771
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Process simulation of dimethyl ether synthesis via methanol vapor phase dehydration
Autorzy:
Bai, Z.
Ma, H.
Zhang, H.
Ying, W.
Fang, D.
Powiązania:
https://bibliotekanauki.pl/articles/779378.pdf
Data publikacji:
2013
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
dimethyl ether
methanol dehydration to DME
process simulation
Opis:
The production processes included catalytic dehydration of methanol in an adiabatic fixed-bed reactor and two columns product separations. In this study, the technological process for dimethyl ether (DME) synthesis is built on PRO/II platform based on the combined parameters of the reaction dynamic model for methanol dehydration reaction, the improved NRTL model of the liquid phase, the PR model of vapor phase. In order to validate the proposed model, the simulation results have been compared with the available data from a set of industrial production equipment with a production capacity of 200 000 tonnes per annum. A comparison between the calculated and measured results has proved that these results are satisfactory. The bed height and the volume of the catalytic bed are calculated aim at one million t/a DME yields and while taking account of high-purity DME production. After discussing the influence of feed stage location and reflux ratio for DME product purity, the suitable unit operation conditions are chosen. Accordingly, accurate process simulation results provide the basis and guidance for an improvement and development of the similar industrial device.
Źródło:
Polish Journal of Chemical Technology; 2013, 15, 2; 122-127
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
One-dimensional isothermal multicomponent diffusion-reaction model and its application to methanol synthesis over commercial Cu-based catalyst
Autorzy:
Lei, K.
Ma, H.
Zhang, H.
Ying, W.
Fang, D.
Powiązania:
https://bibliotekanauki.pl/articles/778972.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
global kinetics
internal effectiveness factor
diffusion-reaction model
methanol synthesis
Opis:
The present work was a study on global reaction rate of methanol synthesis. We measured experimentally the global reaction rate in the internal recycle gradientless reactor over catalyst SC309. The diffusion-reaction model of methanol synthesis was suggested. For model we chose the hydrogenation of CO and CO2 &enspas key reaction. CO and CO2 &enspwere key components in our model. The internal diffusion effectiveness factors of CO and CO2&enspin the catalyst were calculated by the numerical integration. A comparison with the experiment showed that all the absolute values of the relative error were less than 10%. The simulation results showed that decreasing reaction temperature and catalyst diameter were conducive to reduce the influence of the internal diffusion on the methanol synthesis.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 1; 103-109
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of preparation method on the performance of PtSn/Al2O3 &enspcatalysts for acetic acid hydrogenation
Autorzy:
Zhang, K.
Zhang, H.
Ma, H.
Ying, W.
Fang, D.
Powiązania:
https://bibliotekanauki.pl/articles/779525.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Pt-Sn catalysts
preparation method
acetic acid hydrogenation
XPS
CO-FTIR
Opis:
PtSn/Al2O3 &enspcatalysts with a given loading of 1 wt% Pt and 1 wt% Sn were prepared by co-impregnation or successive impregnation with aqueous solutions of Pt, Sn precursors and a commercial alumina. The catalysts were characterized by N2 &enspadsorption, H2-TPR (H2&ensp temperature-programmed reduction), H2-pulse chemisorption, XPS (X-ray photoelectron spectroscopy) and CO-FTIR (Fourier transform infrared spectroscopy), and tested in the hydrogenation of acetic acid. The results showed that the preparation method affected both the chemical properties and their performance in the hydrogenation of acetic acid. Sn enrichment on the catalysts surface was observed on the co-impregnated catalyst and catalyst in which the Pt precursor had been loaded first. It was found that the modification of Pt was a function of the sequence of Sn addition as revealed by CO-FTIR. Co-impregnated catalyst showed the highest activity and ethanol selectivity.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 1; 11-17
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on Underwater Explosive Welding of Al-Steel Coaxial Pipes
Autorzy:
Yu, Y.
Ma, H.
Zhao, K.
Shen, Z.
Cheng, Y.
Powiązania:
https://bibliotekanauki.pl/articles/358620.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
metal-matrix composites
explosive welding
surface ablation
microstructures
bonding interface
Opis:
In order to solve the aluminum surface ablation issue of Al-Steel bimetallic pipes manufactured by the explosive welding technique, a novel explosive welding system has been designed to weld Al-Steel coaxial pipes. The stand-off distance was chosen according to an empirical formula. A special Explosive Cord with an aluminum coating was used as the explosive. Four experiments were performed using Explosive Cords 1, 2, 3 and 4, respectively. In each experiment, three reliable PVDF (Polyvinylidene Fluoride) piezoelectric film sensors were used to sample the impact pressure between the parent pipe and the flyer pipe along the detonation direction. p-t Curves were obtained at different points on the bimetallic pipe manufactured by Explosive Cord 1. In order to observe the inner surface and to judge the bonding interface, specimens were cut along the axial direction. BSE (Backscattering Electron) images of the interfaces were obtained. According to these pictures from all of the specimens cut along the axial direction, the surface ablation phenomenon has disappeared. The bimetallic pipe manufactured by the new welding system using Explosive Cord 3 has an irregular wavy interface, between micro and small wavy interface, which is one of the best bonding forms.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 1; 251-265
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of boron on ZSM-5 catalyst for methanol to propylene conversion
Autorzy:
Xu, A.
Ma, H.
Zhang, H.
Ying, W.
Fang, D.
Powiązania:
https://bibliotekanauki.pl/articles/777971.pdf
Data publikacji:
2013
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
methanol to propylene
ZSM-5
boron modifi cation
propylene
Opis:
B-ZSM-5 catalysts were prepared by various modification methods with boric acid, including ion-exchange, impregnation and direct synthesis. The catalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), NH3-Temperature Programmed Desorption (NH3-TPD), N2 adsorption-desorption, Fourier Transform Infrared spectrometry (FT-IR), 27Al and 11B MAS NMR spectra. The results revealed that the weak acidity of catalysts was significantly increased by modification. The catalytic activity was measured in a fixed bed at 460°C for methanol to propylene (MTP) reaction. The results of MTP reaction showed a great increment of the propylene selectivity for the boron modified samples, especially for the directly synthesized B-ZSM-5 which also displayed high activity and selectivity towards C2 =-C4 = olefins. It was found that the remarkable selectivity strongly depended on the intensity of weak acidity.
Źródło:
Polish Journal of Chemical Technology; 2013, 15, 4; 95-101
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Converged ultra-wideband and multi-level wired signal downstream transport over single wavelength in wavelength-division multiplexing passive optical network
Autorzy:
Ma, H
Wang, F.
Wang, W.
Zhang, X
Yu, Q.
Powiązania:
https://bibliotekanauki.pl/articles/174929.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
ultra-wideband (UWB)
multi-level amplitude switch keying (M-ASK)
wavelength-division multiplexing passive optical network (WDM-PON)
Opis:
Simultaneous providing services of ultra-wideband and wired signal over single wavelength can greatly decrease the complexity and reduce the costs of a wavelength-division multiplexing passive optical network. However, ultra-wideband signal occupies the spectrum range from 3.1 to 10.6 GHz, and a narrow idle frequency band (from 0 to 3.1 GHz) could be employed to transport wired signal with a limited rate. In this paper, we proposed a scheme to simultaneously provide ultra-wideband and wired services, in which the information rate of the wired signal is enhanced by employing a multi-level amplitude switch keying signal in the idle frequency band formed by ultra-wideband signal. In comparison with other advanced modulation formats used for wavelength-division multiplexing passive optical networks such as orthogonal frequency division multiplexing, multi-level amplitude switch keying signal can be easily received by using intensity modulation direct detection, which will greatly reduce the cost of end-users. Especially, if a multi-band ultra-wideband signal is substituted for the direct-sequence ultra-wideband signal, the available spectrum range to transport wired signal will be easily extended to 5 GHz as multi-band ultra-wideband signal has a narrower spectrum width and flexible center frequency, so 4-amplitude switch keying signal with a rate of 5 Gbaud will achieve an information rate of 10 Gbit/s.
Źródło:
Optica Applicata; 2015, 45, 4; 433-445
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Frictional Coefficient Change of Groove Surface in Compact Spinning with a Suction Groove
Zmiana współczynnika tarcia powierzchni rowka w przędzeniu kompaktowym z rowkiem ssącym
Autorzy:
Ma, H. C.
Lu, S.
Cheng, L. D.
Hua, Z.
Powiązania:
https://bibliotekanauki.pl/articles/231666.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
suction groove
compact spinning
frictional coefficient
twisting
rowek ssania
przędzenie kompaktowe
współczynnik tarcia
skręcanie
tor przędzenia
Opis:
Compared with conventional ring spinning, compact spinning with a suction groove can reduce hairiness and improve yarn quality, and it has certain advantages to long staple fibre. In this article, we analyse the changing rule of rotational speed and study the change curve of the frictional coefficient in the gathering zone. The results show that the fibre bundles’ rotational speed at each point along the surrounding arc gradually decreases from the maximum to zero in the gathering area, but the rotating speed of the fibre bundles is constant in the suction hole. The angle between the parallel component speed and that at each point is near to a linear change in the no suction hole, with there being no change in the suction hole. The parallel component of the frictional coefficient for each point is a variable in the no suction hole, being constant in the suction hole.
Porównując konwencjonalne przędzenie obrączkowe i przędzenie kompaktowe z zastosowaniem rowka ssącego można stwierdzić, że uzyskuje się polepszenie włochatości przy stosowaniu przędzenia z rowkiem. Analizowano charakterystykę zmiany prędkości i krzywe współczynnika tarcia w strefie zbiorczej. Stwierdzono, że prędkość wirowania wiązek włókien zmniejsza się w każdym punkcie łuku toru przędzy, ale prędkość wirowania wiązek włókien jest stała w rowku ssącym. W artykule poddano szczegółowej analizie prędkości i zachowanie przędzy w poszczególnych punktach toru przędzenia.
Źródło:
Fibres & Textiles in Eastern Europe; 2013, 5 (101); 40-42
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies of Negative Pressure and Cleaning Condition Effects on Gathering for Ramie Compact Spinning with a Suction Groove
Badanie podciśnienia i warunków czyszczenia na skupienie włókien ramii przy przędzeniu kompaktowym z rowkiem zasysającym
Autorzy:
Ma, H C
Cheng, L. D.
Yan, G X
Xu, S P
Powiązania:
https://bibliotekanauki.pl/articles/232971.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
suction groove
compact spinning
ramie
negative pressure
hairiness index
przędzenie kompaktowe
ramia
redukcja włochatości tkanin
Opis:
The application of the compact spinning technique with a suction groove could reduce the spinning triangle to a minimum and dramatically decrease the hairiness of ramie yarn. The change range of negative pressure was discussed when the hairiness index was reduced to a minimum for the best gathering effect. The relationship between the doffing time and hairiness index of compact yarn was studied. When the suction groove was not cleaned, the spinning times influenced the fibre number accumulated inside the suction groove. The cleaning suction groove made airflow run smoothly, and the gathering effect of fibres was basically unchanged; thus the hairiness index of yarn rarely fluctuated. For compact yarn compared with 100% 27.8 tex traditional ring-spun yarn, the 4 mm hairiness index and above decreases by more than 79.72%. The result shows that ramie compact spinning with a suction groove could gather edge fibres effectively and reduce harmful hairiness markedly.
Zastosowanie przędzenia kompaktowego z rowkiem zasysającym pomogło zredukować trójkąt przędący i w ten sposób intensywnie zmniejszyć włochatość otrzymywanych przędz. Ustalono zakres stosowania podciśnienia dla uzyskania najlepszego efektu. Kiedy rowek zasysający nie był czyszczony, czas przędzenia wpływał na ilość włókien akumulowanych wewnątrz tego rowka. Czyszczenie rowka zasysającego powoduje, że powietrze przepływa równomiernie i efekt skupienia włókien pozostawał niezmieniony dzięki czemu indeks włochatości przędzy zmieniał się w małym stopniu. Wyniki pokazały, że kompaktowe przędzenie ramii z zastosowaniem rowka zasysającego pozwala skutecznie gromadzić skrajne włókna i redukować włochatość.
Źródło:
Fibres & Textiles in Eastern Europe; 2014, 3 (105); 54-57
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of the Energetic Additive Coated MgH2 on the Power of Emulsion Explosives Sensitized by Glass Microballoons
Autorzy:
Cheng, Y.
Wang, Q.
Liu, F.
Ma, H.
Shen, Z.
Guo, Z.
Liu, R.
Powiązania:
https://bibliotekanauki.pl/articles/357940.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
emulsion explosive
power
hydrogen storage material
magnesium hydride
Opis:
Traditional emulsion explosives, in spite of excellent water resistance, safe handling and good storage performance, have low power problems which seriously hinders their use. In order to improve the power of emulsion explosives, a hydrogen based emulsion explosive was devised. Scanning electron microscope pictures and experimental storage results show that the coating effect and stability of coated magnesium hydride (MgH2) are very good. The power of an emulsion explosive sensitized by glass microballoons was significantly increased (24.30 mm compression of lead block) after adding coated MgH2, compared to only 16.10 mm compression when not added. Thus emulsion explosives with coated MgH2 as an energetic additive have many potential applications.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 3; 705-713
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
iTRAQ-based quantitative proteomics analysis reveals inhibitory mechanismsof the antimicrobial peptide MDAP-2 against Salmonella gallinarum
Autorzy:
Zhang, Y.
Yu, S.
Ying, X.
Jia, B.
Liu, L.
Liu, J.
Kong, L.
Pei, Z.
Ma, H.
Powiązania:
https://bibliotekanauki.pl/articles/2087299.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Salmonella gallinarum
AMP
iTRAQ
inhibitory mechanism
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 3; 405-414
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Theoretical Studies of a New Insensitive Explosive, 2’-Methyl-3-nitro-2’H-[1,3’-bi(1,2,4-triazole)]-5,5’-diamine
Autorzy:
Luo, J.
Liu, Y.
Wang, J.
Chai, T.
Yuan, J.
Chang, S.
Yu, Y.
Jing, S.
Ma, H.
Powiązania:
https://bibliotekanauki.pl/articles/358633.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
insensitive explosive
synthesis
theoretical studies
density functional theory
new 1,2,4-triazole derivative
Opis:
A new insensitive energetic material 2’-methyl-3-nitro-2’H-[1,3’-bi(1,2,4-triazole)]-5,5’-diamine (1) was prepared by a three-step synthesis from commercially available chemicals. The energetic title compound was comprehensively characterized by various means, including FT-IR, multinuclear (1H, 13C, 14N) NMR spectroscopy, elemental analysis, HPLC and thermal analysis. The sensitivities of the synthesized material towards various external stimuli (impact, friction) were determined according to the BAM method. The optimized structure and related thermodynamic parameters were obtained at the DFT-B3LYP/6-31+G** theoretical level. The detonation properties of the material were also predicted according to the Kamlet-Jacobs formulae and the Monte-Carlo method. The results show that the density, heat of formation, detonation velocity, detonation pressure, impact sensitivity and purity were 1.83 g/cm3, 369 kJ/mol, 7.52 km/s, 25.4 GPa, 82.3 J and 97.7%, respectively. In addition, the compound was an insensitive high explosive which could meet the requirements of high energetic materials.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 2; 269-280
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Free chlorine loss during spraying of membraneless acidic electrolyzed water and its antimicrobial effect on airborne bacteria from poultry house
Autorzy:
Zhao, Y.
Xin, H.
Zhao, D.
Zheng, W.
Tian, W.
Ma, H.
Liu, K.
Hu, H.
Wang, T.
Soupir, M.
Powiązania:
https://bibliotekanauki.pl/articles/49243.pdf
Data publikacji:
2014
Wydawca:
Instytut Medycyny Wsi
Źródło:
Annals of Agricultural and Environmental Medicine; 2014, 21, 2
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Seasonal variations in the abundance and sinking flux of biogenic silica in Daya Bay, Northern South China Sea
Autorzy:
Zhao, X.
Yang, W.
Ma, H.
Li, J.
Chen, M.
Fang, Z.
Zhang, X.
Zeng, J.
Qiu, Y.
Zheng, M.
Powiązania:
https://bibliotekanauki.pl/articles/48777.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
biogenic silica
flux
thorium
seasonal variation
shallow water
Daya Bay
China Sea
Źródło:
Oceanologia; 2019, 61, 2
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biological characteristics of a new antibacterial peptide and its antibacterial mechanisms against Gram-negative bacteria
Autorzy:
Pei, Z.
Ying, X.
Tang, Y.
Liu, L.
Zhang, H.
Liu, S.
Zhang, D.
Wang, K.
Kong, L.
Gao, Y.
Ma, H.
Powiązania:
https://bibliotekanauki.pl/articles/2087656.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
antimicrobial peptide
biological characteristics
antibacterial mechanism
Gram-negative bacteria
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 3; 533-542
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
H. Franceschi, M.A. Ortiz (red.), Discrezione di giudizio e capacità di assumere: la formulazione del canone 1095, Pontifìcia Università della Santa Croce. Monografie Giuridiche 43, Milano 2013, 262 ss.
Autorzy:
Nowicka, Urszula
Powiązania:
https://bibliotekanauki.pl/articles/663065.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Kardynała Stefana Wyszyńskiego w Warszawie
Źródło:
Ius Matrimoniale; 2014, 25, 1; 115-118
1429-3803
2353-8120
Pojawia się w:
Ius Matrimoniale
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removing lead from Iranian industrial wastewater
Autorzy:
Salmani, B.K.
Amoozegar, M.A.
Babavalian, H.
Tebyanian, H.
Shakeri, F.
Powiązania:
https://bibliotekanauki.pl/articles/11541.pdf
Data publikacji:
2016
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Opis:
Metals and chemicals have been increased in industrial processes which they contain a high level of toxic heavy metals and cause a lot of disadvantages for the environment and human health .Biosorption of Pb (П) ions has been studied from aqueous solutions in a batch system by using a bacterial strain isolated from petrochemical wastewaters. Strain 8-I was selected to study the impact of different factors on removal rate. According to morphological, physiological and biochemical characterizations of the strain and in comparison with other studies the strain was tentatively identified as Bacillus sp strain 8-I. The maximum Lead biosorption capacity of 8-I isolate was determined to be 41.58 % at pH 4.0 with 80 mg/l concentration in 48 hours equilibrium time. The comparison between the biosorption capacity of live (45.50 mg/g), heat inactivated (30.23 mg/g) and NaN3 pretreated biomass (26.86 mg/g) were indicated that the ability of live biomass for both of active and passive uptake of lead.
Źródło:
International Letters of Natural Sciences; 2016, 57
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Winter Cover Crop Biomass on Summer Weed Emergence and Biomass Production
Autorzy:
Bittencourt, H.H.
Lovato, P.E.
Comin, J.J.
Lana, M.A.
Altieri, M.A.
Costa, M.D.
Gomes, J.C.
Powiązania:
https://bibliotekanauki.pl/articles/65024.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
A greenhouse assay was carried out to evaluate the effect of winter cover crop residues on spontaneous plants that commonly occur on summer annual fields in Southern Brazil. Dry shoot residues of rye (Secale cereale), vetch (Vicia villosa), fodder radish (Raphanus sativus), and a mix of the three species, were applied over pots that had been seeded with alexandergrass (Brachiaria plantaginea), hairy beggarticks (Bidens pilosa), wild poinsettia (Euphorbia heterophylla), and morning glory (Ipomoea grandifolia) at four different depths (0, 1, 2, or 4 cm). Plant emergence and biomass production were measured. Residues of rye reduced the emergence of B. plantaginea, while vetch diminished I. grandifolia and B. plantaginea emergence. Fodder radish reduced emergence of I. grandifolia. The mix of cover crops reduced emergence of I. grandifolia, B. plantaginea, and B. pilosa. None of the cover crops differed from the control on E. heterophylla emergence. The lowest yields in spontaneous plant shoot biomass were obtained from the cover with rye + vetch + fodder radish. The lowest values of root biomass occurred under cover with rye, fodder radish or the mix. Use of vetch residues decreased emergence of B. plantaginea and I. grandifolia, but enhanced biomass accumulation by the latter.
Źródło:
Journal of Plant Protection Research; 2013, 53, 3
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
What if they are not weld-able?
Autorzy:
Zhang, H.
Jayatissa, A. H.
Durbin, S.
Ma, G.
Powiązania:
https://bibliotekanauki.pl/articles/407437.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
hybrid mechanical joining
friction stir welding
riveting
magnesium
aluminum
Opis:
Many light metals, such as aluminum and magnesium alloys, are promised to provide significant weight reduction for automobiles. However, the difficulties in welding these metals seriously hinder their large-scale applications. A new, hybrid mechanical joining process is proposed to avoid the inherited metallurgical complications in welding. By spinning and pressing a solid rivet into the metals, a joint is formed with the locking from the rivet, a stirred/mixed zone around the rivet, and solid bonding at the faying interface. This riveting process combines the actions of friction-stir welding in which metals of difierent sheets are mechanically mixed, and self-piercing riveting process which embeds a rivet in the sheets. Experiments have shown that such a friction-stir riveting process can produce joints of comparable strength to those created by other joining means, and can be applied to dififcult-to-weld metals and dissimilar metals, such as aluminum-to-aluminum, magnesium-to-magnesium, and aluminum-to-magnesium.
Źródło:
Management and Production Engineering Review; 2012, 3, 3; 86-91
2080-8208
2082-1344
Pojawia się w:
Management and Production Engineering Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Isolation, identification and extracellular enzymatic activity of culturable extremely halophilic archaea and bacteria of IncheBoroun wetland
Autorzy:
Rasooli, M.
Amoozegar, M.A.
Sepahy, A.A.
Babavalian, H.
Tebyanian, H.
Powiązania:
https://bibliotekanauki.pl/articles/11626.pdf
Data publikacji:
2016
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Opis:
Extremely halophilic diversity of IncheBroun wetland located in the north of Iran was investigated by using culture-dependent methods. Sampling was carried out in May and September 2014. In each sampling 4 distinct regions of wetland were analyzed by using complex media like MGM, JCM168, MH1 and an alkaliphilic medium containing 23% salts. After incubation at 40˚C, a total of 406 isolates and 2.1 × 106 CFU/ml were obtained in culture media. Among them 361 isolates were obtained from MGM and 39 isolates from JCM 168, 3 isolates from MH1 and 3 isolates from the alkaliphilic media. Initial morphological, biochemical and physiological tests were performed. Production of 4 hydrolytic enzymes by 45 selected strains was assayed qualitatively. A total of 38, 19 and 6 strains were able to produce lipase, DNase and amylase activity. Protease activity was not observed among strains. As total 45 strains were selected randomly and phylogenetic analysis of 16S rRNA was performed for them. Among selected strains 40 isolated strians belonged to Haloarchaea and were belonged to the genera: Haloarcula(30%), Halorubrum(27.5%), Haloferax(17.5%), Halobellus (10%), Halogeometricum(5.2%), Halobacterium(2.6%), Halolamina(2.6%), Halorhabdus (2.6%) and Halostagnicola (2.6%). Haloarcula and Halorubrum were the dominant populations. A total of 5 strains belonged to domain of Bacteria and were similar to members of Rhodovibrio (40%), Pseudomonas (40%) and Salicola (20%).
Źródło:
International Letters of Natural Sciences; 2016, 56
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
In vitro culture of big-sage (Lantana camara L.) plant
Autorzy:
Ibrahim, M.A.
Sabty, M.Z.
Mussa, S.H.
Powiązania:
https://bibliotekanauki.pl/articles/12710538.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Opis:
The study was conducted to mass micropropagation of big sage (Lantana camara L.) plant by shoot multiplication technique. The treatments 2.22 and 2.66 µmol·L⁻¹ BA gave the highest significant increase in the percentage of response to shoot multiplication and number of shoots per explant compared to the other treatments as reached 96.70% and 100.00% and 4.33 and 6.00 shoots, respectively. The results showed that these two treatments did not differ significantly between them. While the 1.33 µmol·L⁻¹ BA gave the lowest values in the percentage of response to shoot multiplication and number of shoots per explant were 80.00% and 2.00 shoots per explant, respectively. The MS medium supplemented with 4.30 or 5.37 µmol·L⁻¹ NAA gave a high response to root formation, number of roots per shoot and root length. While the MS medium supplemented with 6.44 or 7.52 µmol·L⁻¹ NAA gave low values in these characteristics. The MS medium with 2.22 or 2.66 µmol·L⁻¹ concentration of BA or 7.52 µmol·L⁻¹ concentration of NAA recorded the highest significant increase in the percentage of response to callus formation. While the MS medium supplemented with 1.33 µmol·L⁻¹ BA or 4.30 µmol·L⁻¹ NAA gave less response to the callus formation.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2020, 19, 2; 67-73
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on haloalkaliphilic sulfur-oxidizing bacterium for thiosulfate removal in treatment of sulfidic spent caustic
Autorzy:
Makzum, S.
Amoozegar, M.A.
Dastgheib, S.M.M.
Babavalian, H.
Tebyanian, H.
Shakeri, F.
Powiązania:
https://bibliotekanauki.pl/articles/11481.pdf
Data publikacji:
2016
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Opis:
Due to the disadvantages of physiochemical methods for sulfidic spent caustic treatment, attentions are drawn to the environmental-friendly biotreatments including sulfur-oxidizing haloalkaliphiles. Thioalkalivibrio versutus DSM 13738 was grown at alkaline (pH10) autotrophic medium with sodium carbonate/bicarbonate as the sole source of carbon and amended with sodium thiosulfate as the electron and energy source. The effect of various parameters including temperature (25-40 °C), pH (8-11), NaCl concentration (0.5-5 % w/v) and sodium thiosulfate concentrations (100-750 mM) was evaluated on bacterial growth and thiosulfate removal. This strain could eliminate sodium thiosulfate at very high concentrations up to 750 mM. The results showed that the highest specific growth rate was pH 9.5 and thiosulfate removal of Thioalkalivibrio versutus occurred at pH 10.5. The optimum salt concentration for thiosulfate removal was 2.5 % w/v and 5 % NaCl and specific growth rate elevated 2.5% w/v. It was also specified that this strain thrives occurred in 37 ºC and at 35 and 37 ºC higher removal of thiosulfate. Following chemical oxidation of sulfide to thiosulfate, application of Thioalkalivibrio versutus could be promising for spent caustic treatment. Since thiosulfate is utilized as an energy source, highest removal efficiency occurred at marginally different conditions compared to optimal growth.
Źródło:
International Letters of Natural Sciences; 2016, 57
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Test research on the resistance performance of high-speed trimaran planing hull
Autorzy:
Ma, W.
Sun, H.
Zou, J.
Yang, H.
Powiązania:
https://bibliotekanauki.pl/articles/259708.pdf
Data publikacji:
2013
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
trimaran planing hull
side hulls
high speed
step
resistance
model test
Opis:
In order to identify high-speed navigation ability of trimaran planing hull, as well as investigate the characteristics of its resistance and hull form, ship model tests were conducted to measure resistance, trim and heaving under different displacements and gravity centre locations. The test results were then used to study the influence of spray strips on resistance and sea-keeping qualities. Moreover, different planning surfaces were compared in the model tests which helped to look into influence of steps on hull resistance and its moving position. Also, the resistance features of monohull and trimaran planing hulls, both with and without steps, were compared to each other. From the tests it can be concluded that: the two auxiliary side hulls increase aerodynamic lift at high-speed motion, which improves the hydrodynamic performance; the trimaran planing hull has also excellent longitudinal stability and low wave-making action; when Fr∇> 8, its motion is still stable and two distinct resistance peaks and two changes of sailing state (the second change is smaller) appear; spray strips are favourable for sea-keeping qualities at high speed. The change trends before the second resistance peak as to the resistance and sailing behaviour of trimaran planing hull without steps are the same as for monohull planing hull without steps. but when steps in both hulls exist the change trends are different; more specifically: trimaran planing hull with steps has only one resistance peak and its resistance increases along with its speed increasing, and the resistance is improved at the increasing speed as the number of steps increases.
Źródło:
Polish Maritime Research; 2013, 4; 45-51
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ist der Einsatz von Magnetfuhrungen in Gross-Sagewerken sinnvoll?
Czy zastosowanie magnetycznych prowadnic w dużym tartaku ma sens?
Autorzy:
Dietz, H.
Krzosek, S.
Powiązania:
https://bibliotekanauki.pl/articles/8311.pdf
Data publikacji:
2013
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology; 2013, 82
1898-5912
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of some diets on demographic parameters of Ectomyelois ceratoniae (Zeller) (Lepidoptera:Pyralidae) in vitro
Autorzy:
Mortazavi, S.
Samih, M.A.
Ghajarieh, H.
Jafari, A.
Powiązania:
https://bibliotekanauki.pl/articles/65132.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
The carob moth, Ectomyelois ceratoniae (Zeller) (Lepidoptera: Pyralidae), is a cosmopolitan species widely distributed in different habitats worldwide. This moth is a well known pest of many fruits as well as dried fruits in storage. In this study, the biological parameters of the carob moth were studied in a growth chamber under controlled conditions (30±2°C, 65±5% and 16L : 8D). The studied moths were on four diets including pistachio, and pomegranate (both are referred to as the natural diets), and semi-synthetic, and synthetic food. The results demonstrated that survival rate of the carob moth on the two natural diets was higher than the survival rate of the carob moth on the semi-synthetic, and synthetic diets (also referred to as the artificial diets). The highest and lowest amount of life expectancy (ex) were obtained for moths on the pistachio diet (38.82), and the pomegranate diet (29.32), respectively. The highest age-stage specific reproductive value (vxj) was observed for moths on the pistachio diet (181.1). The intrinsic rate of increase (r) and finite rate of increase (λ) were calculated to be highest when the pomegranate diet was used (0.091 and 1.096) and lowest when the synthetic diet was used (0.06) and (1.062). The highest amounts of net reproductive rate and mean fecundity were obtained for moths fed the pistachio diet and the lowest were for moths fed the synthetic diet. Our results also showed that the mean generation times were 48.32, 44.42, 37.19, and 42 days for moths fed synthetic food, pistachio, pomegranate, and semi-synthetic food, respectively. The outcome of this research can be used to effectively select the most useful rearing of carob moths for using them in natural pheromone traps as Integrated Pest Management programs.
Źródło:
Journal of Plant Protection Research; 2015, 55, 2
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A combined hydrocyclone - electrocoagulation treatment for different types of industrial wastewater
Autorzy:
Farghaly, Mohamed G.
Attia, H.
Saleh, H. A.
Ramadan, A. M.
Abdel Khalek, M.A.
Powiązania:
https://bibliotekanauki.pl/articles/1448028.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
hydrocyclone
electrocoagulation
paper industry
iron industry
marble industry
granite industry
Opis:
Every year, a large amount of mineral processing wastewater is discharged from various industries into the environment which is considered a challenging task not only because of its large volume, but more importantly, its hazardous components, while its reuse as feedwater without proper treatments causes great harm to the final product of these industries. Cost-effective methods are required to treat a wide range of industrial wastewater in a diverse range of conditions. In this study, a combined hydrocyclone-electrocoagulation system is tried to treat the wastewater for industries with high water consumption and high pollutants such as paper industry, iron and metal forming industry, and marble industry. The effects of the hydrocyclone operational parameters, such as feed inlet pressure and diameter, vortex finder diameter, apex diameter, and feed solids content, were investigated. In the case, wastewater of paper industry, the following optimum conditions $(P = 4.5$ bar, $D_o = 15.8 mm, D_u = 6 mm, D_i = 4 mm and c_s = 2.3%)$ were achieved. An overflow of about 90.58% water recovery and 21.45% solid at 75.92% separation efficiency was obtained. The results showed that the hydrocycloneelectrocoagulation treatment has efficiently treated the three different types of industrial wastewater. The chemical oxygen demand (COD), biochemical oxygen demand (BOD), total solid (TS), total suspended solids (TSS), colour and turbidity, were reduced sharply and met the effluent discharge or reuse standards. Also, compared with the hydrocyclone-treated wastewater, the hydrocyloneelectrocoagulation-treated wastewater was found to be more enhanced.
Źródło:
Physicochemical Problems of Mineral Processing; 2021, 57, 2; 143-155
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Genome size of the diploid hybrid species Hippophae goniocarpa and its parental species, H. rhamnoides ssp. sinensis and H. neurocarpa ssp. neurocarpa (Elaeagnaceae)
Autorzy:
Zhou, X.
Ma, J.
Wang, W.
Gong, N.
Zhang, Y.
Liu, J.
Powiązania:
https://bibliotekanauki.pl/articles/19367.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Źródło:
Acta Biologica Cracoviensia. Series Botanica; 2010, 52, 2
0001-5296
Pojawia się w:
Acta Biologica Cracoviensia. Series Botanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phosphate-induced changes in fatty acid biosynthesis in Chlorella sp. KS-MA2 strain
Autorzy:
Ahmad, A.
Osman, S.M.
Cha, T.S.
Loh, S.H.
Powiązania:
https://bibliotekanauki.pl/articles/80623.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2016, 97, 4
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Control of infection of Biomphalaria alexandrina (Ehrenberg, 1831) with Schistosoma mansoni Sambon, 1907 using Eucalyptus camaldulensis
Autorzy:
Mossalem, H.S.
Habib, M.R.
Ghareeb, M.A.
Powiązania:
https://bibliotekanauki.pl/articles/84576.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Mikołaja Kopernika. Wydział Biologii i Ochrony Środowiska. Stowarzyszenie Malakologów Polskich
Źródło:
Folia Malacologica; 2018, 26, 3
1506-7629
Pojawia się w:
Folia Malacologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ryzyko działalności gospodarczej w wielkoobszarowych przedsiębiorstwach rolnych produkujących rzepak
Business risk in the large area agricultural enterprises producing rapeseed
Autorzy:
Jerzak, M.A.
Lakowski, H.S.
Powiązania:
https://bibliotekanauki.pl/articles/864807.pdf
Data publikacji:
2013
Wydawca:
The Polish Association of Agricultural and Agribusiness Economists
Opis:
Celem badań była analiza i ocena poziomu ryzyka działalności gospodarczej w wielkoobszarowych przedsiębiorstwach rolnych produkujących rzepak. Badania przeprowadzono na podstawie sprawozdań finansowych 21 podmiotów z województw wielkopolskiego oraz kujawsko-pomorskiego. Poziom ryzyka gospodarczego wyznaczono za pomocą medianowego odchylenia bezwzględnego oraz współczynnika zmienności dla wskaźników reprezentujących obszar rentowności, płynności finansowej, zadłużenia oraz efektywności zarządzania. Dla wszystkich grup wskaźników poziom ryzyka działalności gospodarczego był wysoki lub bardzo wysoki. Stwierdzony poziom ryzyka wskazuje na występowanie znacznej niestabilności dochodowej badanych gospodarstw.
The main objective of this paper was to evaluate the economic risk level of the large scale agricultural enterprises producing rapeseed in the Wielkopolskie and Kujawsko-Pomorskie Provinces. The evaluation of economic risk level was done using the method of financial ratio analysis and methods of descriptive statistics – median absolute deviation and coefficient of variation. Ratio analysis included the following groups of ratios: liquidity, profitability, debt, management efficiency. Studies have shown that the highest level of risk relates to the profitability and efficiency management ratios and that influence on farm income stabilization.
Źródło:
Roczniki Naukowe Stowarzyszenia Ekonomistów Rolnictwa i Agrobiznesu; 2013, 15, 5
1508-3535
2450-7296
Pojawia się w:
Roczniki Naukowe Stowarzyszenia Ekonomistów Rolnictwa i Agrobiznesu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Acaricidal, ovicidal, and repellent effects of Tagetes patula leaf extract against Tetranychus urticae Koch (Acari: Tetranychidae)
Autorzy:
Ismail, M.S.M.
Tag, H.M.
Rizk, M.A.
Powiązania:
https://bibliotekanauki.pl/articles/65234.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
This study investigates the acaricidal, ovicidal, and repellent effects of the Tagetes patula Linn. (Asteraceae) leaf extract against both the adult female and egg stages of Tetranychus urticae Koch (Trombidiformes: Tetranychidae) under laboratory conditions. The Tagetes patula ethanolic leaf extract [TpEtOH70%] was screened for adulticide and ovicide bioassays in order to consider its acute toxicity. One sublethal concentration was used to assess egg-laying capacity (fecundity), repellent, and oviposition deterrent activities. The chemical characterization was conducted by gas chromatography-mass spectrometry (GC-MS) analysis to identify the TpEtOH70% bioactive components. Results showed that the LC50 value of TpEtOH70% leaf extract predicted by Probit analysis against T. urticae adult females at 24 h was 0.99%.The TpEtOH70% leaf extract showed a significant toxic effect as the highest mean mortality rates (± SE) of the treated adult females was 88.9 ± 3.7%. However, the TpEtOH70% leaf extract was insignificant in affecting the egg-laying capacity of the adult females treated with a sublethal dose of 0.5% even after 72 h. The TpEtOH70% leaf extract was classified repellent since the repellent index (RI) value was lower than 1 – SD. In addition, it had a high oviposition deterring effect based on a 100% reduction of the total number of eggs. The TpEtOH70% leaf extract had a significant ovicidal effect on T. urticae eggs, with 56.04% reduction in hatching. Five bioactive compounds from various classes of phytochemicals were identified in the TpEtOH70% leaf extract and the major compound was phytol (62.72%). This pioneering investigation reveals the adulticidal, ovicidal, and repellent activities of the TpEtOH70% leaf extract against T. urticae. A combination of multiple modes of action of different plant components may act alone or in synergism to delay the development of mite resistance.
Źródło:
Journal of Plant Protection Research; 2019, 59, 2
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of pre-sowing magnetic field doses through RSM in pea
Autorzy:
Iqbal, M.
Ahmad, I.
Hussain, S.M.
Khera, R.A.
Bokhari, T.H.
Shehzad, M.A.
Powiązania:
https://bibliotekanauki.pl/articles/25738.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Opis:
Seed pre-sowing magnetic field treatment was reported to induce biochemical and physiological changes. In the present study, response surface methodology was used for deduction of optimal magnetic field doses. Improved growth and yield responses in the pea cultivar were achieved using a rotatable central composite design and multivariate data analysis. The growth parameters such as root and shoot fresh masses and lengths as well as yield were enhanced at a certain magnetic field level. The chlorophyll contents were also enhanced significantly vs. the control. The low magnetic field strength for longer duration of exposure/ high strength for shorter exposure were found to be optimal points for maximum responses in root fresh mass, chlorophyll ‘a’ contents, and green pod yield/plant, respectively and a similar trend was observed for other measured parameters. The results indicate that the magnetic field pre-sowing seed treatment can be used practically to enhance the growth and yield in pea cultivar and response surface methodology was found an efficient experimental tool for optimization of the treatment level to obtain maximum response of interest.
Źródło:
International Agrophysics; 2013, 27, 3
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of hadronic rescattering on the elliptic flow after the hydrodynamics model
Autorzy:
Ma, G.
Ma, Y.
Sa, B.
Cai, X.
He, Z.
Huang, H.
Long, J.
Shen, W.
Zhong, Ch.
Chen, J.
Zuo, J.
Zhang, S.
Shi, X.
Powiązania:
https://bibliotekanauki.pl/articles/148372.pdf
Data publikacji:
2006
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
elliptic flow
hydrodynamic model
hadronic rescattering
LUCIAE model
Opis:
Abstract A hydrodynamics + hadronic rescattering model is used to simulate Au+Au collisions at 200 GeV and a Cooper-Frye method is adopted for hadronization. The effect of hadronic rescattering on elliptic flow V2 in 20 40% Au+Au collisions at 200 GeV has been investigated. It is found that the hadronic rescattering can suppress elliptic flow V2 and makes an asymmetric system in momentum space tend to be less anisotropic. The suppression effect becomes weak with increasing transverse momentum. In addition, the effect of hadronic rescattering on transverse momentum spectra and anisotropy of hadronic coordinate space is presented.
Źródło:
Nukleonika; 2006, 51,suppl.3; 21-27
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Jurassic rhynchonellide brachiopods from the Jordan Valley
Autorzy:
Feldman, H.R.
Schemm-Gregory, M.
Ahmad, F.
Wilson, M.A.
Powiązania:
https://bibliotekanauki.pl/articles/23239.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
Jurassic
rhynchonellid brachiopod
brachiopod
Jordan Valley
Brachiopoda
Rhynchonellida
Mughanniyya Formation
Opis:
Jurassic rhynchonellide brachiopods from the Jordan Valley are herein revised and new taxa are added to the faunal list. In this study of Jurassic rhynchonellides from Wadi Zarqa, northwestern Jordan, we recognize the following taxa: Eurysites rotundus, Cymatorhynchia quadriplicata, Daghanirhynchia triangulata, D. angulocostata, Pycnoria magna, Schizoria elongata, and Schizoria cf. intermedia. The following new taxa are described: Daghanirhynchia susanae sp. nov. and Amydroptychus markowitzi sp. nov. The Middle Jurassic Mughanniyya Formation of northwest Jordan is dominated by limestone beds. The sedimentary environment is interpreted as neritic, light, and nutrient−rich resulting in high faunal diversity. The high rhynchonellide endemism of this fauna is yet another confirmation of pronounced Middle Jurassic endemism along the southern Tethyan margin of the Ethiopian Province. Brachiopods of the Jordanian Mughanniyya Formation can be correlated with the fauna of the Aroussiah Formation in Sinai and the Zohar and Matmor formations in Southern Israel.
Źródło:
Acta Palaeontologica Polonica; 2012, 57, 1
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of plant hormones on micropropagation potential of superior strawberry genotypes and their parents via shoot-tip culture
Autorzy:
Sarıdaş, M.A.
Baktemur, G.
Taşkın, H.
Kargı, S.P.
Powiązania:
https://bibliotekanauki.pl/articles/13054608.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2021, 20, 3; 63-75
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative study to determine food consumption of cotton leafworm, Spodoptera littoralis, on some cotton genotypes
Autorzy:
Khedr, M.A.
Al-Shannaf, H.M.
Mead, H.M.
Shaker, S.A.E.-A.
Powiązania:
https://bibliotekanauki.pl/articles/65971.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
comparative study
food consumption
cotton leafworm
Spodoptera littoralis
cotton
genotype
Opis:
A study was done on the feeding behaviour, development indices, and biochemical response of 4th instar larvae of Spodoptera littoralis in which seven cotton genotypes were used: Giza86, Giza88, Giza92, 10229 × Giza 86, H10, Suvin, and Karshenseki. Castor bean leaves were used as the control. All the tested cotton genotypes decreased the feeding behavior of S. littoralis larvae in terms of consumption percentages, consumption rate (CR), growth rates (GR), efficiency of conversion of ingested and digested food (ECI and ECD), approximate digestibility (AD), and feeding deterrence (FDI) compared to the control. Additionally, all the tested cotton varieties prolonged the time taken for larval and pupal duration and reduced both the pupation percentages and the weight of the resulting pupae, as compared to the control. Giza86 recorded the lowest values of both larval growth index and fitness (7.31 and 1.05, respectively) while the genotype Suvin recorded the lowest standardised growth index (0.020) more than other genotypes and the control that gave 10.16, 1.53, and 0.032, respectively. There was a significant inhibition in the level of both total soluble protein and total lipids, and activities of amylase and the trehalase enzymes in all the tested varieties, compared to that found in the control.
Źródło:
Journal of Plant Protection Research; 2015, 55, 3
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
EGTA, a calcium chelator, affects cell cycle and increases DNA methylation in root tips of Triticum aestivum L.
Autorzy:
Zhang, C.
Shi, W.
Ma, K.
Li, H.
Zhang, F.
Powiązania:
https://bibliotekanauki.pl/articles/57455.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Botaniczne
Opis:
In this study, when germinated Triticum aestivum L. seeds were treated with 0, 2, 4 and 6 mM ethyl glycol tetraacetic acid (EGTA), root growth was suppressed and the mitotic index decreased. These inhibitory effects were positively correlated with EGTA concentration. RT-PCR analysis revealed that the expression of several gene markers related to the G1/S transition of the cell cycle were significantly downregulated. Confocal microscopy of Fluo-3/AM-stained roots showed chelation of nearly all of the Ca2+ within the root meristematic regions. Both random amplified polymorphic DNA (RAPD) and coupled restriction enzyme digestion-random amplification (CRED-RA) techniques showed significant increases in the levels of genomic DNA polymorphisms and degree of DNA methylation. The study provides information concerning the impact of Ca²+) chelator, EGTA, on the growth, expression of cell cycle transition marker genes, and changes in DNA structure and methylation in the wheat roots.
Źródło:
Acta Societatis Botanicorum Poloniae; 2016, 85, 3
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energy feature of a multi-flow column flotation process
Autorzy:
Cheng, G.
Yu, Y.
Ma, L.
Xia, W.
Xu, H.
Powiązania:
https://bibliotekanauki.pl/articles/109768.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
flotation column
turbulent kinetic energy
turbulent dissipation rate
bubble
Opis:
A cyclonic-static micro-bubble flotation column (FCSMC) has been widely used in mineral separation. FCSMC includes countercurrent, cyclone and jet flow mineralization zones in a single column. In this study, the energy feature of the three different zones was compared. The turbulent flow was evaluated in terms of the turbulent kinetic energy (k) and the turbulent dissipation rate (ε). An appropriate computing model was determined by comparing the flow field value measured by PIV with the results of the Fluent numerical simulation. Jet flow separation exhibited the maximum k and ε values among the three columns, whereas counter-current separation displayed the minimum values. The high circulating volumetric flowrate means great energy input and turbulent intensity. The higher turbulent dissipation rate, the smaller the bubble is. The better performance of the FCSMC was mainly attributed to the multiple mineralization steps. The floatability of mineral particles gradually decreases with an increase in flotation time, the mineralization energy gradually increased to overcome the decrease in mineral floatability. By contrast, the countercurrent was beneficial for recovering the coarse particles, and the jet flow was beneficial for recovering the fine particles.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 1266-1284
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Test studies of the resistance and seakeeping performance of a trimaran planing hull
Autorzy:
Ma, W.
Sun, H.
Zou, J.
Zhuang, J.
Powiązania:
https://bibliotekanauki.pl/articles/259495.pdf
Data publikacji:
2015
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
trimaran planing hull
appendix
resistance
seakeeping
model test
Opis:
Towing tank tests in calm water were performed on a trimaran planing hull to verify its navigational properties with different displacements and centres of gravity, as well as to assess the effects of air jets and bilge keels on the hull’s planing capabilities, and to increase the longitudinal stability of the hull. Hydrostatic roll tests, zero speed tests, and sea trials in the presence of regular waves were conducted to investigate the hull’s seakeeping ability. The test results indicate that the influence of the location of the centre of gravity on the hull resistance is similar to that of a normal trimaran planing hull; namely, moving the centre of gravity backward will reduce the resistance but lower the stability. Bilge keels improve the longitudinal stability but slightly affect the resistance, and the presence of air jets in the hull’s channels decreases the trim angle and increases heaving but has little effect on the resistance. Frequent small-angle rolling occurs in waves. The heaving and pitching motions peak at the encounter frequency of , and the peaks increase with velocity and move towards greater encounter frequencies. When the encounter frequency exceeds, the hull motion decreases, which leads to changes in the navigation speed and frequency.
Źródło:
Polish Maritime Research; 2015, 1; 22-27
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Calculations of (γ,n) Reaction Cross Sections using Different Level Density Models for Some Lanthanide Nuclei
Autorzy:
Akçaalan, U.
Ünal, R.
Sarpün, İ.
Yalim, H.
Oruncak, B.
Powiązania:
https://bibliotekanauki.pl/articles/1401985.pdf
Data publikacji:
2015-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
21.10.Ma
Opis:
The discrete level information deficiency requires usage of level density models in cross section calculations. The total reaction cross sections for gamma-induced reactions through the six level density models with a consistent parameterization of some lanthanides ($\text{}^{141}Pr,$ $\text{}^{142}Nd,$ $\text{}^{144}Sm,$ $\text{}^{153}Eu,$ $\text{}^{159}Tb,$ $\text{}^{160}Gd,$ $\text{}^{165}Ho,$ $\text{}^{175}Lu$) were calculated using TALYS 1.6 in the incident energy range from 5 to 30 MeV. All calculations from the present study were compared with each other and with data available in the literature.
Źródło:
Acta Physica Polonica A; 2015, 128, 2B; B-228-B-230
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Chinese cabbage BrMYB34.2 transcription factor regulates indolic glucosinolates biosynthesis in Arabidopsis
Autorzy:
Zhao, Y.
Zhang, Y.
Guo, X.
Ma, Y.
Zhang, P.
Liu, H.
Liu, G.
Guo, J.
Powiązania:
https://bibliotekanauki.pl/articles/12705984.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Opis:
Glucosinolates (GS) are a group of sulfur- and nitrogen-rich plant secondary metabolites that originate from amino acids and exist mainly in plants in the order Brassicales, such as Arabidopsis thaliana (Arabidopsis) and Chinese cabbage (Brassica rapa ssp. pekinensis). To date, several regulatory components responsible for GS biosynthesis have been identified in Arabidopsis. However, the functions of GS biosynthesis regulators in Chinese cabbage have not been clarified. In our current study, a putative ATR1/MYB34 orthologous gene, BrMYB34.2, was isolated from Chinese cabbage leaves. To investigate the function of this gene, we engineered Arabidopsis plants that overexpress BrMYB34.2 ectopically and phenotypic analysis was performed. Moreover, we assayed the accumulation levels of indolic GS (IGS) and aliphatic glucosinolates in transgenic plants and test the expression of key genes of IGS biosynthesis and tryptophan synthesis by Real-time quantitative PCR. And further analysed the resistance of transgenic plants in 5MT stress treatment. The results indicate that ectopic expression of the BrMYB34.2 gene in Arabidopsis was able to up-regulate the accumulation level of IGS due to the increased expression of IGS and Trp biosynthetic genes. Moreover, overexpression of BrMYB34.2 conferred Arabidopsis 5MT resistance. These results suggest that the BrMYB34.2 gene may function as one of the regulators of IGS and Trp biosynthesis in Chinese cabbage.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2020, 19, 1; 85-95
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of clofibric acid and diclofenac during anaerobic digestion of sewage sludge
Autorzy:
Zhou, H.
Zhang, Q.
Zhang, Q
Ma, L.
Tu, B.
Li, H.
Zhou, Y.
Powiązania:
https://bibliotekanauki.pl/articles/207894.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fermentacja beztlenowa
osady ściekowe
farmaceutyki
kwas klofibrowy
diklofenak
anaerobic digestion
sewage sludge
pharmaceuticals
clofibric acid
diclofenac
Opis:
Removal of two acidic pharmaceuticals, clofibric acid and diclofenac, present in sewage sludge using two kinds of anaerobic digestions was investigated. The effective isolation and purification pretreatment to extract the target compounds from the sewage sludge samples was firstly established, followed by gas chromatography-mass spectrometry (GC-MS) analysis to identify and quantify them. Under mesophilic conditions, the removal efficiencies for clofibric acid and diclofenac with the initial concentrations of 5 μg /dm3 were up to 95% and 97%. After thermophilic anaerobic digestion, the removal efficiency could be increased to 99.3% for clofibric acid, however, it did not increase for diclofenac. In general, anaerobic digestion could effectively remove the target compounds from the sewage sludge (all above 90%).
Źródło:
Environment Protection Engineering; 2013, 39, 4; 63-77
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model construction and experimental verification of the equivalent elastic modulus of a double-helix wire rope
Autorzy:
Chen, H. Y.
Zhang, K.
Bai, Y. X.
Ma, Y.
Deng, H. Z.
Powiązania:
https://bibliotekanauki.pl/articles/280950.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
mechanical properties
wire rope
double-helix wire rope
spatial configuration curve
equivalent elastic modulus
Opis:
To accurately describe mechanical properties of a complex wire rope, a double-helix wire rope is used as an example in this study. According to the spatial structure characteristics of the central helical line of each wire rope, the spatial configuration curve for the double- -helix wire rope is obtained by using differential geometry theory. On the basis of this curve, the mathematical model of the equivalent elastic modulus of the wire rope is developed, and the elastic modulus of a 6×7+IWS wire rope is measured using a universal tensile testing machine. The experimental results are compared with the predicted results to verify correctness of the elastic modulus prediction of the double-helix wire rope.
Źródło:
Journal of Theoretical and Applied Mechanics; 2018, 56, 4; 951-960
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Variability to sedimentary dynamics and climatic conditions during the last two millennia at sebkha Souassi in eastern Tunisia
Autorzy:
Essefi, E.
Jmaa, H.B.
Touire, J.
Tagortig, M.A.
Yaich, C.
Powiązania:
https://bibliotekanauki.pl/articles/11975.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
This paper covers work intended to study the interplay of sedimentary dynamics and climatic variability over the last two millennia within Tunisia’s sebkha Souassi. Based on the Visual Core Description, and magnetic susceptibility, we date the core from sebkha Souassi to the last two millennia. Genetic grain-size distribution then provided a basis for the identification of six climatic stages, i.e. the Warming Present (WP), the Late Little Ice Age (Late LIA), the Early Little Ice Age (ELIA), the Medieval Climatic Anomaly (MCA), the Dark Ages (DA), and the Roman Warm Period (RWP). The WP stretches across the uppermost 3 cm, with a high grey scale indicating a dry climate. The Late LIA is located between 3 and 7 cm, and the ELIA between 7 and 28 cm. Intermediate values for GS indicate that this stage may be classified as moderate. The MCA spanning from 28 to 40 cm is marked by a sharp decrease in GS indicative of a wet period. The DA appear along the part between 40 and 79 cm, a shift from light to dark sediments being recorded. The RWP in turn appears between 79 and 114 cm. Based on the grain-size distribution, two low-frequency cycles were identified, indicating radical global changes in climatic conditions, differential tectonics and groundwater fluctuations. High-frequency cycles in turn attest to local modifications of climatic conditions.
Źródło:
Papers on Global Change; 2013, 20
2300-8121
1730-802X
Pojawia się w:
Papers on Global Change
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on electric spring control method considering noncritical load voltage constraint
Autorzy:
Chen, Y.
Ma, G.
Xu, U.
Zhang, H.
Ju, R.
Powiązania:
https://bibliotekanauki.pl/articles/140516.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electric spring
noncritical load
voltage excursion
reactive power compensation
Opis:
With the increasing penetration rate of grid-connected renewable energy generation, the problem of grid voltage excursion becomes an important issue that needs to be solved urgently. As a new type of voltage regulation control method, electric spring (ES) can alleviate the fluctuations of renewable energy output effectively. In this paper, the background and basic principle of the electric spring are introduced firstly. Then, considering the influence of an electric spring on noncritical load voltage, noncritical loads are classified reasonably, and based on the electric spring phasor diagram, the control method to meet the noncritical load voltage constraint is proposed. This control method can meet the requirements of voltage excursions of different kinds of noncritical load, increase the connection capacity of the noncritical load and improve the voltage stabilization capacity of the electric spring. Finally, through the simulation case, the feasibility and validity of electric spring theory and the proposed control method are verified.
Źródło:
Archives of Electrical Engineering; 2018, 67, 4; 709-724
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic electric vehicles charging load allocation strategy for residential area
Autorzy:
Wang, Y.
Ma, X.
Wang, F.
Hou, X.
Sun, H.
Zheng, K.
Powiązania:
https://bibliotekanauki.pl/articles/140939.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electric vehicles
charging power management
allocation strategy
priority assessment
Opis:
A large amount of electric vehicles (EVs) charging load will bring significant impact to the power system. An appropriate resource allocation strategy is required for securing the power system safety and satisfying EVs charging demand. This paper proposed a power coordination allocation strategy of EVs’ in distribution systems. The strategy divides the allocation into two stages. The first stage is based on scores assigned to EVs through an entropy method, whereas the second stage allocates energy according to EV’s state of charge. The charging power is delivered in order to maximize EV users’ satisfaction and fairness without violation of grid constraints. Simulation on a typical power-limited residential distribution network proves the effectiveness of the strategy. The analysis results indicate that compared with traditional methods, EVs, which have higher charging requirement and shorter available time will get more energy delivered than others. The root-mean-square-error (RMSE) and standard-deviation (SD) results prove the effectiveness of the methodology for improving the balance of power delivery.
Źródło:
Archives of Electrical Engineering; 2018, 67, 3; 641--654
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Motion prediction of catamaran with a semisubmersible bow in wave
Autorzy:
Sun, H.
Jing, F.
Jiang, Y.
Zou, J.
Zhuang, J.
Ma, W.
Powiązania:
https://bibliotekanauki.pl/articles/258596.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
SSB catamaran
model test
overset grid
motion region
motion response
Opis:
Compared with standard vessels, a slender catamaran with a semi-submerged bow (SSB) demonstrates superior seakeeping performance. To predict the motion of an SSB catamaran, computational fluid dynamics methods are adopted in this study and results are validated through small-scale model tests. The pitch, heave, and vertical acceleration are calculated at various wavelengths and speeds. Based on the overset grid and motion region methods, this study obtains the motion responses of an SSB catamaran in regular head waves. The results of the numerical studies are validated with the experimental data and show that the overset grid method is more accurate in predicting the motion of an SSB catamaran; the errors can be controlled within 20%. The movement data in regular waves shows that at a constant speed, the motion response initially increases and then decreases with increasing wavelength. This motion response peak is due to the encountering frequency being close to the natural frequency. Under identical sea conditions, the motion response increases with the increasing Froude number. The motion prediction results, that derive from a shortterm irregular sea state, show that there is an optimal speed range that can effectively reduce the amplitude of motion.
Źródło:
Polish Maritime Research; 2016, 1; 37-44
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling study of flue gas flow pattern with pressure, amount and shape variation catalytic converter
Autorzy:
Ghofur, A.
Isworo, H.
Subagyo, R.
Tamjidillah, M.
Siswanto, R.
Ma’ruf, -
Purwanto, H.
Muchsin, -
Powiązania:
https://bibliotekanauki.pl/articles/1818507.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
shape effect
absorption effectiveness
ANSYS
catalytic converter
filter-not- cut
filter-cut
efekt kształtu
skuteczność wchłaniania
katalizator
Opis:
Purpose: The purpose of this study is to analyse the modelling of exhaust gas flow patterns with variations in pressure, number, and shape of filters on the catalytic converter. Design/methodology/approach: The research method used is a simulation using ANSYS, which starts by creating a converter catalytic model with pressure variations: (0.5-1.5 atm), number of filters: (2-5), and the form of filter-cut/filter-not-cut. Findings: The decrease in velocity is caused by non-uniform velocity in the exhaust gas flow that occurs when passing through a bend in the filter-cut that serves as a directional flow to create turbulence. Filter-cut type tends to have fluctuating pressure, turbulence flow pattern shape so that contact between filter and exhaust gas is more effective. Based on the analysis of flow patterns, the speed and pressure of the 5 filter-not-cut design at a pressure of 0.5 are the best, while at pressure (1-1.5 atm) the type 5 filter-cut is the best. Research limitations/implications: This study is limited to filter-not-cut and filter-cut types with variations in the number of filters: 2, 3, 4, and 5, and the inlet pressure between 0.5-1 atm. Practical implications: The practical implications of this study are to find a catalytic converter design that has advantages in the effectiveness of exhaust gas absorption. Originality/value: The results show that the filter-not-cut and filter-cut types have the best effectiveness in the number of 5 filters. Filter-not-cut at the pressure of 0.5 atm and filter-cut at pressure (1-1.5 atm).
Źródło:
Archives of Materials Science and Engineering; 2020, 103, 1; 5--17
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
DFIS: A novel data filling approach for an incomplete soft set
Autorzy:
Qin, H.
Ma, X.
Herawan, T.
Zain, J. M.
Powiązania:
https://bibliotekanauki.pl/articles/331284.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
zbiór rozmyty
napełnianie danych
soft sets
incomplete soft sets
data filling
association degree
Opis:
The research on incomplete soft sets is an integral part of the research on soft sets and has been initiated recently. However, the existing approach for dealing with incomplete soft sets is only applicable to decision making and has low forecasting accuracy. In order to solve these problems, in this paper we propose a novel data filling approach for incomplete soft sets. The missing data are filled in terms of the association degree between the parameters when a stronger association exists between the parameters or in terms of the distribution of other available objects when no stronger association exists between the parameters. Data filling converts an incomplete soft set into a complete soft set, which makes the soft set applicable not only to decision making but also to other areas. The comparison results elaborated between the two approaches through UCI benchmark datasets illustrate that our approach outperforms the existing one with respect to the forecasting accuracy.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2012, 22, 4; 817-828
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel process of dye wastewater treatment by linking advanced chemical oxidation with biological oxidation
Autorzy:
Zou, H.
Ma, W.
Wang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/204846.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
dye wastewater
Fenton's oxidation
biological oxidation
biological aerated filter
advanced oxidation processes
Opis:
Dye wastewater is one of typically non-biodegradable industrial effluents. A new process linking Fenton’s oxidation with biological oxidation proposed in this study was investigated to degrade the organic substances from real dye wastewater. During the combination process, the Fenton’s oxidation process can reduce the organic load and enhance biodegradability of dye wastewater, which is followed by biological aerated filter (BAF) system to further remove organic substances in terms of discharge requirement. The results showed that 97.6% of chemical oxygen demand (COD) removal by the combination process was achieved at the optimum process parameters: pH of 3.5, H22
Źródło:
Archives of Environmental Protection; 2015, 41, 4; 33-39
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A posteriori error estimates for beams with inexact flexural stiffness representation
Autorzy:
Torii, André J.
Gracite, Paula M.A.
Miguel, Leandro F.F.
Lopez, Rafael H.
Powiązania:
https://bibliotekanauki.pl/articles/24201505.pdf
Data publikacji:
2023
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
beam
error estimate
inexact stiffness
belka
oszacowanie błędów
Opis:
In this work, we present a posteriori error estimates for the Euler-Bernoulli beam theory with inexact flexural stiffness representation. This is an important subject in practice because beams with non-uniform flexural stiffness are frequently modeled using a mesh of elements with constant stiffness. The error estimates obtained in this work are validated by means of two numerical examples. The estimates presented here can be employed for adaptive mesh refinement.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2023, 22, 2; 62--74
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetic research of quinoline, pyridine and phenol adsorption on modified coking coal
Autorzy:
Sun, X.
Xu, H.
Wang, J.
Ning, K.
Huang, G.
Yu, Y.
Ma, L.
Powiązania:
https://bibliotekanauki.pl/articles/110365.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
adsorption kinetics
modification
coking coal
coking wastewater
Opis:
Adsorption is widely used in wastewater treatment. In this work, the removal of quinoline, pyridine and phenol from coking wastewater by using modified coking coal, which was treated by four different modification methods i.e. acidification sodium hydroxide (5 mol/dm3), hydrochloric acid (5 mol/dm3) and acetic acid (5 mol/dm3) and low-temperature (105 oC) oxidation, was investigated. The modified coal was characterized by the surface area analysis, SEM, total acidity and basicity and FT-IR. The results showed that the surface area from high to low follows the order: modification with acetic acid, modification with hydrochloric acid, raw coal, modification with sodium hydroxide and modification with low-temperature. Experimental data were fitted to pseudo-first-order, pseudo-second-order and intra-particle diffusion. The adsorption of all followed pseudo-second-order kinetics. The result showed that the removal efficiency of coal modified by hydrochloric acid and acetic acid are higher than raw coal, while modified by sodium hydroxide and low-temperature are lower than raw coal., The coal modified by hydroxide acid had the best adsorption capacity.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 965-974
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Economic analysis and pattern of agrochemicals use among smallholder crop farmers in Edu Local Government Area of Kwara State
Autorzy:
Olayinka, A.S.
Lawal, A.F.
Bwala, M.A.
Mohammed, U.H.
Sulaiman, A.I.
Powiązania:
https://bibliotekanauki.pl/articles/43680.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Przyrodniczy w Poznaniu. Wydawnictwo Uczelniane
Źródło:
Journal of Agribusiness and Rural Development; 2019, 52, 2
1899-5241
Pojawia się w:
Journal of Agribusiness and Rural Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Gametophytic self-incompatibility in Rosaceae fruit trees
Autorzy:
Ma, C.
Qu, H.
Powiązania:
https://bibliotekanauki.pl/articles/12679736.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Tematy:
Rosaceae
Malus
Prunus
Prunus avium
Prunus armeniaca
Prunus dulcis
Prunus mume
Prunus salicina
Pyrus
Pyrus pyrifolia
fruit tree
pollen
gametophyte
self-incompatibility
calcium
Opis:
Rosaceae fruit trees are characterized by gametophytic self-incompatibility, with their production typically requiring artificial pollination or pollination tree is required in production. Both of these solutions cause reductions in production efficiency, and self-incompatibility has become a major issue in agricultural biology, and as such, has been extensively studied. In this review, we discuss the relationship between S-RNase content in the style and self-incompatibility, and the role of the SLF gene in stamen-determining factor. Considering mutations in self-compatibility-related genes and self-compatibility in polyploid fruit trees, we discuss the potential mechanisms of self-incompatibility. Based on a preliminary study of the role of pollen tube Ca2+ gradients in self-incompatibility in Pyrus, we propose a new mechanistic model of self-incompatibility taking into account the effect of Ca2+. We also discuss the potential for hormone regulation to be used to control selfincompatibility in Rosaceae fruit trees.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2019, 18, 4; 149-156
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie psychrometru Peltiera do pomiaru potencjalu wody - prototyp przyrzadu pomiarowego
Autorzy:
Skierucha, W
Sobczuk, H.
Malicki, M.A.
Powiązania:
https://bibliotekanauki.pl/articles/1402592.pdf
Data publikacji:
2001
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
woda glebowa
potencjal wodny
przyrzady pomiarowe
termozlacza
psychrometr Peltiera
water soil
water potential
measurement device
thermocouple
Peltier psychrometer
Źródło:
Acta Agrophysica; 2001, 53; 125-134
1234-4125
Pojawia się w:
Acta Agrophysica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
17 beta-estradiol affects proliferation and apoptosis of canine bone marrow mesenchymal stem cells in vitro
Autorzy:
Zhou, Z.-H.
Gu, C.-W.
Li, J.
Huang, X.-Y.
Deng, J.-Q.
Shen, L.-H.
Cao, S.-Z.
Deng, J.-L.
Zuo, Z.-C.
Wang, Y.
Ma, X.-P.
Ren, Z.-H.
Yu, S.-M.
Powiązania:
https://bibliotekanauki.pl/articles/2087308.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
apoptosis
bone marrow mesenchymal stem cells (BMSCs)
canine
proliferation
17 beta-estradiol (E2)
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 2; 235-245
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A study on chemical characterization and proximate composition of flathead mullet fish (Mugil cephalus) of estuarine region of the Bay of Bengal
Autorzy:
Rowshan-Ali, M.
Roni, M.A.H.
Haque, M.A.
Uddin, M.H.
Powiązania:
https://bibliotekanauki.pl/articles/11517.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
chemical characteristics
proximate composition
flathead mullet
fish
Mugil cephalus
polyunsaturated fatty acid
estuarine habitat
Bengal Bay
Opis:
The Flathead mullet (Mugil cephalus) is a mullet of the genus Mugil in the family Mugilidae, found in coastal tropical, subtropical and estuarine water worldwide. Lipid was extracted from the muscle of Flathead mullet (Mugil cephalus) by solvent extraction method and characterized with respect to various chemical e.g. saponification value, saponification equivalent value, acid value, iodine value, peroxide value, ester value, thicyanogen value, unsaponifiable matter, Henher value, Polenske value, Reichert-Meissl value etc properties and compared with those of different oils. Palmitic acid, Stearic acid and Myristic acid were observed at fatty acid composition of the sample by chromatographic examination. Percentages of protein and mineral (N, P, K, Ca) in the muscle of Flathead mullet were studied by modified Kjeldahl method.
Źródło:
International Letters of Natural Sciences; 2014, 12, 2
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rzęsistkowica u kobiet leczonych w Ośrodku Naukowo-Leczniczym II Kliniki Położnictwa i Chorób Kobiecych AM w Bytomiu
Problem of trichomonadosis in the sanatorium for women
Trikhomonadoz u zhenshhin v Nauchno-Terapevticheskim centre II Kliniki Akusherstva i Zhenskikh Boleznejj M.A. v Bytome pri kurorte v Gochalkovicakh Zdroe
Autorzy:
Skałba, H.
Suchy, H.
Powiązania:
https://bibliotekanauki.pl/articles/2176558.pdf
Data publikacji:
1973
Wydawca:
Polskie Towarzystwo Parazytologiczne
Źródło:
Wiadomości Parazytologiczne; 1973, 19, 3; 337-341
0043-5163
Pojawia się w:
Wiadomości Parazytologiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Towarowe instrumenty pochodne w stabilizowaniu dochodów z produkcji rzepaku w warunkach rosnącego ryzyka cenowego
Commodity derivatives in the income stabilization of rapeseed production under conditions of increasing price risk
Autorzy:
Jerzak, M.A.
Lakowski, H.S.
Powiązania:
https://bibliotekanauki.pl/articles/842382.pdf
Data publikacji:
2013
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Źródło:
Zeszyty Naukowe Szkoły Głównej Gospodarstwa Wiejskiego. Ekonomika i Organizacja Gospodarki Żywnościowej; 2013, 103
2081-6979
Pojawia się w:
Zeszyty Naukowe Szkoły Głównej Gospodarstwa Wiejskiego. Ekonomika i Organizacja Gospodarki Żywnościowej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The use of evolutionary operations to assess the intervention effect on the behaviour of dairy cows
Autorzy:
Czubernat, A.
Makulska, J.
Krogh, M.A.
Stygar, A.H.
Powiązania:
https://bibliotekanauki.pl/articles/2119624.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Zootechniczne
Tematy:
evolutionary operation
dairy cows
cow grouping strategy
lying time
Opis:
The aim of the study was to use evolutionary operations (EVOP) to evaluate changes in the behaviour of dairy cows depending on the strategy according to which they were grouped after calving. The experiment was carried out on a Danish farm keeping about 200 Holstein cows. The farm had two separate areas for lactating cows: a small area with 54 waterbeds and a larger area with 133 beds with mattresses. During the experiment both areas were filled with cows. Cows after calving were introduced to either the small area (group) or the large area (group). After 14 days, the cows from the small group were transferred to the large group. The impact of different cow grouping strategies on their lying time, considered a welfare indicator, was examined. During the 210-day experiment, 195,703 observations were collected. The behavioural data were analysed using a linear mixed-effect regression model fitted by the maximum likelihood method. Days in milk, parity number, and lying time of herd mates were found to significantly affect the lying time of individual cows, while the strategy of cow grouping after calving had no effect on lying time.
Źródło:
Roczniki Naukowe Polskiego Towarzystwa Zootechnicznego; 2020, 16, 4; 59-68
1733-7305
Pojawia się w:
Roczniki Naukowe Polskiego Towarzystwa Zootechnicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identyfikacja stanu sektora biopaliw jako czynnika stymulującego rozwój gospodarstw rolnych i przedsiębiorstw agrobiznesu
Identification of the biofuels sector state as a factor stimulating the development of farms and agribusiness enterprises
Autorzy:
Jerzak, M.A.
Lakowski, H.S.
Powiązania:
https://bibliotekanauki.pl/articles/865241.pdf
Data publikacji:
2011
Wydawca:
The Polish Association of Agricultural and Agribusiness Economists
Opis:
Sektor biopaliw w Polsce znajduje się w początkowej fazie swej aktywności produkcyjnej. Makrootoczenie sektora i fundamentalny, znaczący wpływ przepisów fiskalno-prawnych regulujących działalność podmiotów w branży biopaliw transportowych oraz sytuacja polityczna i jej międzynarodowy charakter, decydują o kierunku rozwoju branży w świetle rosnącej świadomości ekologicznej. Ze względu na ekonomiczne uwarunkowania produkcja biopaliw jest mało opłacalna, w związku z tym wspierana jest różnorakimi prorozwojowymi narzędziami administracyjnymi.
Poland has introducedfiscal and legal regulations that oblige enterprises to use admixture of biofuels in petrol and diesel oil - National Indicator Goal. Therefore, the demand for oilseed rape is high, and there is a growing demand for bio-components used in producing liąuidfuels. Biofuels sector in Poland is developing very dynamically, even though for companies specializing in the production of biofuels, the fiscal and legal regulations are one of the most important factors governing the activity of entities in the sector.
Źródło:
Roczniki Naukowe Stowarzyszenia Ekonomistów Rolnictwa i Agrobiznesu; 2011, 13, 2
1508-3535
2450-7296
Pojawia się w:
Roczniki Naukowe Stowarzyszenia Ekonomistów Rolnictwa i Agrobiznesu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A pedological study attempting to combine soil taxonomy and WRB classification systems
Autorzy:
Zayed, Adel M.A.
Abdel Ghaffar, Mamdouh K.
Ali, Faiza S.
Ewida, Esmail H.
Powiązania:
https://bibliotekanauki.pl/articles/27312660.pdf
Data publikacji:
2023
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
North-East Nile Delta
pedological study
physiographic units
soil classification
Opis:
The study area is located in the North-Eastern part of the Nile Delta, northern of Ismailia canal and western Suez Canal. It comprises an area of about 3,058.8 km 2 (728,285.38 feddans). This work aims to identify the main physiographic units and its features, as well as emphasise the importance of combining soil taxonomy (2014) and WRB classification (2022) systems. Two main physiographic units were distinguished in the study area according to the previous studies, interpretation of satellite image and digital elevation model (DEM) as well as field observations; the first consists of fluvio-marine flats and the second river terraces which include the fluvial and deltaic origin. According to field morphological descriptions as well as chemical and physical analyses, representative profiles are classified by using both Soil Taxonomy and WRB systems. The current study is the third manuscript to emphasise the importance of using both systems together in order to obtain maximum possible characteristics of the earth. Below are examples that illustrate this importance. Soils of profile No. 4 which represent the fluvio-marine soils are classified according to soil taxonomy as follows: Typical Haplosalids, fine silty, mixed, thermic. While these soils are classified according to WRB as follows: Fluvic Sodic Solonchaks (Siltic/Loamy/Clayic, Chloridic, Evapocrustic, Ochric, Hypersalic). Soils of gypsiferous which represent soils of profile No. 6 are classified according to Soil Taxonomy as: Gypsic Aquisalids, loamy over sandy, mixed, thermic, whereas the application of the WRB system reveals the following: Fluvic Calcic Gypsic Sodic Gleyic Solonchaks (Loamic, Chloridic, Hypersalic).
Źródło:
Journal of Water and Land Development; 2023, 57; 197--203
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure and Improvement of Properties of Floss Silk via Scouring and Finishing Treatment
Struktura i możliwość poprawy właściwości jedwabiu naturalnego poprzez procesy wykończenia
Autorzy:
Lin, H.
Ma, P.
Ning, W.
Huang, J.
Jiang, F.
Hu, Z.
Xiao, H.
Powiązania:
https://bibliotekanauki.pl/articles/233484.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
floss silk
finishing treatment
structure
silk fibre properties
nici jedwabne
obróbka wykańczająca
struktura
właściwości włókien jedwabiu
Opis:
In the present study, floss silk was treated by scouring and finishing, respectively. The micro structure was observed with scanning electron microscopy (SEM), the mechanical property tested by an Instron 5566 tensile tester, and the crystal structure was analysed with Fourier transform attenuated total reflection infrared spectroscopy (FTIR) and X-ray diffraction (XRD), respectively. The results show that the properties of floss silk treated with the refining method are better than with the alkali method.
Badania dotyczyły obróbki wykańczalniczej jedwabiu naturalnego. Mikrostruktura jedwabiu była badana za pomocą skaningowej mikroroskopii elektronowej, a właściwości mechaniczne testowane były klasyczną zrywarką firmy Instron, podczas gdy strukturę krystaliczną analizowano za pomocą spektroskopii w podczerwieni (FTIR) oraz rozproszenia promieniowania rentgenowskiego. Wyniki pozwoliły wytypować najlepszą w danych warunkach metodę obróbki.
Źródło:
Fibres & Textiles in Eastern Europe; 2013, 3 (99); 18-21
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Risk factors for outbreaks caused by variant strain of Newcastle disease on environmentally controlled broiler chicken farms in Lahore, Pakistan
Autorzy:
Maqsood, R.
Khan, A.
Mushtaq, M.H.
Yaqub, T.
Aslam, M.A.
Rashid, H.B.
Gill, S.S.
Akram, R.
Rehman, A.
Chaudhry, M.
Powiązania:
https://bibliotekanauki.pl/articles/2087145.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Newcastle disease
retrospective
environmentally controlled house
biosecurity
vaccine
Źródło:
Polish Journal of Veterinary Sciences; 2021, 24, 4; 497-503
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of matrine on reducing damage to bovine mammary epithelial cells induced by Staphylococcus aureus alpha-hemolysin
Autorzy:
Feng, F.
Ma, W.W.
Luo, H.X.
Guan, C.P.
Zhou, X.Z.
Powiązania:
https://bibliotekanauki.pl/articles/2087720.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
α-hemolysin
BMECs
matrine
cell damage
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 2; 409-413
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnosis strategy for complex systems based on reliability analysis and MA DM under epistemic uncertainty
Strategia diagnostyki dla systemów złożonych oparta na analizie niezawodności oraz metodach wieloatrybutowego podejmowania decyzji MA DM w warunkach niepewności epistemologicznej
Autorzy:
Duan, R.
Zhou, H.
Fan, J.
Powiązania:
https://bibliotekanauki.pl/articles/300631.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
train-ground wireless communication system
reliability analysis
MADM
epistemic uncertainty
TOPSIS
system łączności bezprzewodowej pociąg-ziemia
analiza niezawodności
niepewność epistemologiczna
Opis:
Fault tolerant technology has greatly improved the reliability of train-ground wireless communication system (TWCS). However, its high reliability caused the lack of sufficient fault data and epistemic uncertainty, which increased significantly challenges in system diagnosis. A novel diagnosis method for TWCS is proposed to deal with these challenges in this paper, which makes the best of reliability analysis, fuzzy sets theory and MADM. Specifically, it adopts dynamic fault tree to model their dynamic fault modes and evaluates the failure rates of the basic events using fuzzy sets theory and expert elicitation to hand epistemic uncertainty. Furthermore, it calculates some quantitative parameters information provided by reliability analysis using algebraic technique and Bayesian network to overcome some disadvantages of the traditional methods. Diagnostic importance factor, sensitivity index and heuristic information values are considered comprehensively to obtain the optimal diagnostic ranking order of TWCS using an improved TOPSIS. The proposed method takes full advantages of the dynamic fault tree for modelling, fuzzy sets theory for handling uncertainty and MADM for the best fault search scheme, which is especially suitable for fault diagnosis of the complex systems.
Technologia odporna na błędy przyczyniła się do dużej poprawy niezawodności systemów łączności bezprzewodowej pociąg-ziemia (TWCS). Jednakże wysoka niezawodność tych systemów pociąga za sobą brak wystarczających danych o uszkodzeniach oraz niepewność epistemologiczną, której zwiększenie stworzyło liczne wyzwania w zakresie diagnostyki systemów. W niniejszej pracy zaproponowano nowatorską metodę diagnozowania TWCS, która odpowiada na owe wyzwania wykorzystując analizę niezawodności, teorię zbiorów rozmytych oraz metody wieloatrybutowego podejmowania decyzji MADM. W szczególności, zaproponowana metoda wykorzystuje dynamiczne drzewa błędów do modelowania dynamicznych stanów niezdatności oraz pozwala na oszacowanie częstości występowania uszkodzeń dla zdarzeń podstawowych z wykorzystaniem teorii zbiorów rozmytych oraz oceny eksperckiej, rozwiązując w ten sposób problem niepewności epistemologicznej. Ponadto, metoda ta umożliwia obliczenie niektórych parametrów ilościowych na podstawie informacji pochodzących z analizy niezawodności, z zastosowaniem techniki algebraicznej oraz sieci bayesowskich, co pozwala na obejście ograniczeń tradycyjnie stosowanych metod. W artykule przeprowadzono szczegółową analizę czynnika ważności diagnostycznej, wskaźnika czułości oraz wartości informacji heurystycznej w celu określenia optymalnej kolejności działań diagnostycznych dla TWCS z zastosowaniem poprawionej wersji TOPSIS Proponowana metoda w pełni wykorzystuje zalety metody drzewa błędów do modelowania, teorii zbiorów rozmytych – do rozwiązywania problemu niepewności oraz MADM – do wyznaczania najlepszej metody wyszukiwania niezdatności, co jest szczególnie przydatne w przypadku diagnozowania niezdatności systemów złożonych.
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 3; 345-354
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Seed germination and emergence of Eragrostis tenuifolia (A. Rich.) Hochst. ex Steud. in response to environmental factors
Autorzy:
Bittencourt, H.H.
da Silva Bonome, L.T.
de Bortoli Pagnoncelli,Jr, F.
Lana, M.A.
Muzell Trezzi, M.
Powiązania:
https://bibliotekanauki.pl/articles/65859.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
seed germination
emergence
Eragrostis tenuifolia
elastic grass
weed
plant response
environmental factor
irradiance
temperature
weed ecology
weed number
Opis:
Eragrostis tenuifolia is a weed species that is gaining ground in Brazil. This weed occurs in pastures, grasslands, crop fields, and roadsides. The objective of this study was to examine the effects of different environmental factors on E. tenuifolia seed germination and seedling emergence. The optimum constant temperature for germination was around 35–30°C. It was also found that 85% of seeds germinated under a 30/20°C alternate temperature regime. Light appears to have a positive effect on seed germination. No seedlings emerged when seeds were buried 3 cm or deeper. The results suggested that E. tenuifolia has the potential to spread into pastures and in no-tillage crop systems in Brazil. Measures such as the use of cover crops and/or soil cultivation can be used to limit germination and seedling emergence, respectively.
Źródło:
Journal of Plant Protection Research; 2016, 56, 1
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fast and effective extraction for equivalent shunt resistances of triple-junction concentrator solar cells
Autorzy:
Lv, H
Dai, J
Sheng, F
Liu, W
Ma, X
Cheng, C
Lv, Q
Powiązania:
https://bibliotekanauki.pl/articles/174425.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
concentrator photovoltaic
triple junction solar cell
equivalent shunt resistance
Opis:
Fast and effective extraction of equivalent shunt resistance for each subcell of GaInP/GaInAs/Ge triple-junction concentrator solar cells is presented. The two-diode model of single junction was introduced to establish the equivalent circuit of triple-junction solar cells. The current-voltage characteristic of the triple-junction solar cells was measured under AM1.5D spectrum, C = 576 and T = 303 K. Equivalent shunt resistance of each subcell was extracted from its estimated current-voltage curve. The estimated current-voltage curve of the triple-junction solar cells shows a good agreement with the experimental data in 0.31% deviation. The degradation in the equivalent shunt resistance for Ge subcell was intentionally introduced to indicate the mechanism of current-matching operation for different subcells, with the maximum output power of the triple-junction solar cells deteriorating from 3.5 to 3.17 W. The results can offer performance analysis and optimum design of photovoltaic applications.
Źródło:
Optica Applicata; 2015, 45, 2; 227-235
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Gamma radiation treated chitosan solution for strawberry preservation: Physico-chemical properties and sensory evaluation
Autorzy:
Jesmin, S.
Al-Jubayer, A.
bin Eusuf, S.
Kamal, A.H.M.
Islam, J.M.M.
Ferdoush, F.
Kabir, S.E.
Khan, M.A.
Powiązania:
https://bibliotekanauki.pl/articles/11054.pdf
Data publikacji:
2016
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Źródło:
International Letters of Natural Sciences; 2016, 60
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A trial of doramectin injection and ivermectin spot-on for treatment of rabbits artificially infested with the ear mite “Psoroptes cuniculi”
Autorzy:
Elhawary, N.M.
Sorour, Sh. S.G.H.
El-Abasy, M.A.
Bazh, E.K.
Sultan, K.
Powiązania:
https://bibliotekanauki.pl/articles/2087886.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Źródło:
Polish Journal of Veterinary Sciences; 2017, 3; 521-525
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comprehensive surveillance of the antibody response to Borrelia burgdorferi s.l. in small ruminants in China
Autorzy:
Yang, J.
Liu, Z.
Guan, G.
Li, Y.
Chen, Z.
Ma, M.
Liu, A.
Ren, Q.
Wang, J.
Luo, J.
Yin, H.
Powiązania:
https://bibliotekanauki.pl/articles/49708.pdf
Data publikacji:
2015
Wydawca:
Instytut Medycyny Wsi
Źródło:
Annals of Agricultural and Environmental Medicine; 2015, 22, 2
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Youngest agamid lizards from Western Europe (Sierra de Quibas, Spain, late Early Pleistocene)
Autorzy:
Blain, H.-A.
Bailon, S.
Agusti, J.
Pinero-Garcia, P.
Lozano-Fernandez, I.
Sevilla, P.
Lopez-Garcia, J.M.
Sanchez, G.R.
Mancheno, M.A.
Powiązania:
https://bibliotekanauki.pl/articles/21138.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Opis:
Here we report a new Early Pleistocene record of agamid lizards (Agamidae indet.) from the Spanish locality of Quibas (ca. 1.3–1.0 Ma), which represents the latest evidence of the family in Western Europe. Up to now, the family Agamidae was considered to have disappeared in this region at 1.8 Ma. This new record implies the survival of agamid lizards for a large part of the Early Pleistocene in the southernmost Iberian Peninsula, probably because of favourable climatic and environmental conditions. Consequently, the formerly detected Pliocene / Pleistocene boundary is no longer recognisable in the evolution of the herpetological assemblages in Western Europe.
Źródło:
Acta Palaeontologica Polonica; 2014, 59, 4
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Field application of Clethodim herbicide combined with Trichoderma spp. for controlling weeds,root knot nematodes and Rhizoctonia root rot disease in two faba bean cultivars
Autorzy:
El-Dabaa, M.A,T.
Abd-El-Khair, H.
E;-Nagdi, W.M.A.
Powiązania:
https://bibliotekanauki.pl/articles/66487.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
Clethodim herbicide (Cle) and three Trichoderma strains (Tri) were applied either alone or in combination (Cle + Tri) for controlling weeds, root knot nematodes (Meloidogyne arenaria) and Rhizoctonia root rot disease (Rhizoctonia solani) as well as for evaluating their effects on total microbial count in the rhizosphere and the number of Rhizobium nodules on roots in two faba bean cultivars cultivated in naturally heavily infested fields. The evaluated characters were very similar for the two tested cultivars (Nubariya 1 and Sakha 3). Treatment with Cle alone highly reduced the fresh and dry matter of tested weeds (Amaranthus viridis, Cynodon dactylon and Cenchrus ciliaris), followed by Cle + Tri and Tri alone. Cle + Tri highly reduced nematode parameters viz. numbers of J2 in soil or roots, females, eggs, galls and egg-masses when compared with each treatment alone. Tri alone caused a great decrease in Rhizoctonia root rot infection, followed by Cle + Tri and Cle alone. Total microbial count and Rhizobium nodules were affected only with Cle treatment. Plant growth parameters (shoot length, shoot fresh and dry weight and numbers of branches and leaves) and yield parameters (fresh pod and dry weight, seed number per pod, seed weight and ash pod weight of plant) were greatly improved for Cle + Tri treatments when compared with either Tri or Cle alone.
Źródło:
Journal of Plant Protection Research; 2019, 59, 2
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of σ-phase formation on long-term durability of welding joints in SUPER 304H steels
Autorzy:
Horváth, J.
Král, P.
Janovec, J.
Powiązania:
https://bibliotekanauki.pl/articles/1112347.pdf
Data publikacji:
2016-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.70.Jb
68.37.Ma
81.30.Mh
81.20.Vj
62.20.mj
Opis:
Article presents results on the analysis of secondary phases formed in the medium-term static isothermal ageing welding joints of a SUPER 304H (675°C/2×10⁴ h). The investigations of the precipitates were focused on the occurrence of σ-phase because its formation leads to significant deterioration of mechanical properties. The microstructure was investigated on microscopic level by scanning/transmission electron microscopy. The distribution and quantification of brittle σ-phase were studied on macroscopic level by color etching method using light optical microscopy. The effect of microstructural changes (σ-phase formation) on the impact strength of an aged base material was investigated. For comparison impact tests on received state material were also performed. The results showed that long-term ageing led to the significant reduction of impact strength as a result of the formation of the σ-phase. It was found that the σ-phase distribution is influenced by welding process. The influence of brittle σ-phase on long-term durability of the degraded steel regarding its insufficient impact strength has been discussed.
Źródło:
Acta Physica Polonica A; 2016, 130, 4; 960-962
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Reinforcement of the TNT System by a Newly-designed GAP-based Polyurethane-Urea: a Molecular Simulation Investigation
Autorzy:
Qian, W.
Shu, Y.
Ma, Q.
Li, H.
Wang, S.
Chen, X.
Powiązania:
https://bibliotekanauki.pl/articles/358512.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
TNT
GAP
polyurethane-urea
inter-molecular interaction
mechanical properties
Opis:
A glycidyl azide (GAP)-based polyurethane-urea (PUU) modifier used in the 1,3,5-trinitrotoluene (TNT)-based composite explosive was investigated by molecular simulation. Inter-molecular interactions were investigated using quantum chemistry calculation on the dimer of TNT and GAP-PUU, and attractive forces were found between the two molecules. The cohesive energy densities and the solubility parameters were obtained through molecular dynamics simulations combined with thermodynamic calculations on the TNT and GAP-PUU amorphous cell models, and the miscibility of the modifier in molten TNT was predicted to be good. The interaction energies and the mechanical properties were then obtained by molecular simulations and mechanical calculations on the solid-phase models of the GAP-PUU with TNT along three crystalline directions, and an improvement in the mechanical properties was predicted.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 2; 411-426
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Early and Middle Frasnian brachiopod faunas and turnover on the South China shelf
Autorzy:
Ma, X -P
Becker, R.T.
Li, H.
Sun, Y.-Y.
Powiązania:
https://bibliotekanauki.pl/articles/21029.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
Early Frasnian
Middle Frasnian
Frasnian
paleontology
brachiopod fauna
South China shelf
Devonian
Brachiopoda
Cyrtospirifer
faunal turnover
Opis:
The first appearance of the brachiopod Cyrtospirifer and related forms in the Late Devonian of South China significantly postdates the beginning of the Frasnian and the entry of the group in other parts of the world. Scattered data from different sections suggest that its first entry, associated with the emergence of other plicate spiriferids, such as theodossid and conispiriferid brachiopods, was late in the Middle Frasnian. At the same time, many rhynchonellids disappeared or became extinct locally in South China. This brachiopod faunal overturn near the Palmatolepis punctata–Early Pa. hassi zonal boundary is the most significant event in the Early–Middle Frasnian of South China, characterized by about a 35% loss of existing species and the flourishing of the plicate spiriferids, which was coeval with the end of a major biogeochemical perturbation recently recognized in the Pa. punctata Zone. By contrast, atrypid brachiopods do not seem to show any significant diversity change. The brachiopod faunal change was probably related to a (local?) transgressive event in South China, which also brought new pelagic faunas northwards into some intra−shelf deeper water areas, such as the Shetianqiao area in central Hunan Province. Fifteen brachiopod species are described and illustrated, which include some taxa that are first recorded or recognized in South China, e.g., the spiriferid Pyramidaspirifer, which is now known from both North America and South China. One new species, Desquamatia qiziqiaoensis, is erected.
Źródło:
Acta Palaeontologica Polonica; 2006, 51, 4; 789-812
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A new centrosaurine from the Late Cretaceous of Alberta, Canada, and the evolution of parietal ornamentation in horned dinosaurs
Autorzy:
Farke, A.A.
Ryan, M.J.
Barrett, P.M.
Tanke, D.H.
Braman, D.R.
Loewen, M.A.
Graham, M.R.
Powiązania:
https://bibliotekanauki.pl/articles/22176.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Opis:
In 1916, a centrosaurine dinosaur bonebed was excavated within the Campanian−aged deposits of what is now Dinosaur Provincial Park, Alberta, Canada. Specimens from this now−lost quarry, including two parietals, a squamosal, a skull missing the frill, and an incomplete dentary, were purchased by The Natural History Museum, London. The material was recently reprepared and identified herein as a previously unknown taxon, Spinops sternbergorum gen. et sp. nov. Based upon the available locality data and paleopalynology, the quarry lies in either the upper part of the Oldman Formation or the lower part of the Dinosaur Park Formation. The facial region of the partial skull is similar to putative mature specimens of Centrosaurusspp. and Styracosaurus albertensis, with short, rounded postorbital horncores and a large, erect nasal horncore. Parietal ornamentation is consistent on both known parietals and is unique among ceratopsids. Bilateral, procurved parietal hooks occupy the P1 (medial−most) position on the dorsal surface of the parietal and are very similar to those seen in Centrosaurus apertus. Epiparietals in the P2 or possibly P3 position (lateral to P1) manifest as extremely elongate, caudally directed spikes, unlike the condition in C. apertus, S. albertensis, or any other “derived” centrosaurine. Cladistic analysis suggests that S. sternbergorum is closely related to Centrosaurus and Styracosaurus. Historically, based upon the condition in Styracosaurus and related centrosaurines, it was assumed that the medial−most elongated spikes on centrosaurine parietals correspond to the P3 epiparietal position. The exception illustrated in the new taxon suggests that homologies of epiparietals among basal centrosaurines (e.g., Albertaceratops and Diabloceratops) and derived centrosaurines (e.g., Styracosaurus and “pachyrhinosaurs”) should be reconsidered. The medially−placed, caudally−directed “P3” process of basal centrosaurines may, in fact, be homologous with P2.
Źródło:
Acta Palaeontologica Polonica; 2011, 56, 4
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analytical and numerical investigation of the free vibration of functionally graded materials sandwich beams
Autorzy:
Bakhy, S.H.
Al-Waily, M.
Al-Shammari, M.A.
Powiązania:
https://bibliotekanauki.pl/articles/2175761.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
FGMs
sandwich beam
classical beam theory
vibration
FEA
frequency
ANSYS
belka warstwowa
klasyczna teoria belek
wibracje
częstotliwość
Opis:
Purpose: In this study, the free vibration analysis of functionally graded materials (FGMs) sandwich beams having different core metals and thicknesses is considered. The variation of material through the thickness of functionally graded beams follows the power-law distribution. The displacement field is based on the classical beam theory. The wide applications of functionally graded materials (FGMs) sandwich structures in automotive, marine construction, transportation, and aerospace industries have attracted much attention, because of its excellent bending rigidity, low specific weight, and distinguished vibration characteristics. Design/methodology/approach: A mathematical formulation for a sandwich beam comprised of FG core with two layers of ceramic and metal, while the face sheets are made of homogenous material has been derived based on the Euler–Bernoulli beam theory. Findings: The main objective of this work is to obtain the natural frequencies of the FG sandwich beam considering different parameters. Research limitations/implications: The important parameters are the gradient index, slenderness ratio, core metal type, and end support conditions. The finite element analysis (FEA), combined with commercial Ansys software 2021 R1, is used to verify the accuracy of the obtained analytical solution results. Practical implications: It was found that the natural frequency parameters, the mode shapes, and the dynamic response are considerably affected by the index of volume fraction, the ratio as well as face FGM core constituents. Finally, the beam thickness was dividing into frequent numbers of layers to examine the impact of many layers' effect on the obtained results. Originality/value: It is concluded, that the increase in the number of layers prompts an increment within the frequency parameter results' accuracy for the selected models. Numerical results are compared to those obtained from the analytical solution. It is found that the dimensionless fundamental frequency decreases as the material gradient index increases, and there is a good agreement between two solutions with a maximum error percentage of no more than 5%.
Źródło:
Archives of Materials Science and Engineering; 2021, 110, 2; 72--85
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Formulation of the endophytic fungus Cladosporium oxysporum Berk. and M.A. Curtis, isolated from Euphorbia bupleuroides subsp. luteola, as a new biocontrol tool against the black bean aphid (Aphis fabae Scop.)
Autorzy:
Bensaci, O.A.
Daoud, H.
Lombarkia, N.
Rouabah, K.
Powiązania:
https://bibliotekanauki.pl/articles/65785.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
Two formulations containing culture filtrates and conidial suspensions of the endophytic fungus Cladosporium oxysporum Berk. & M.A. Curtis, isolated previously from stems of Euphorbia bupleuroides subsp. luteola (Kralik) Maire, were experimentally tested for their aphicid activity against the black bean aphid Aphis fabae Scop. found in Algeria. It was shown that invert emulsions are more effective against aphids, than using aqueous suspensions. This was especially true for formulations containing culture filtrates. The relatively insignificant mortalities obtained by formulations containing conidial suspensions indicated a low infectious potential towards the aphids. The proteolytic activity seemed to be more important than the chitinolytic activity of the fungus against the black bean aphid A. fabae.
Źródło:
Journal of Plant Protection Research; 2015, 55, 1
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Xerophiles and other fungi associated with cereal baby foods locally produced in Uganda
Autorzy:
Ismail, M.A.
Taligoola, H.K.
Nakamya, R.
Powiązania:
https://bibliotekanauki.pl/articles/67513.pdf
Data publikacji:
2012
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
fungi
cereal product
baby food zob.child food
child food
food product
production
Uganda
xerophilic fungi
mycobiota
spoilage
contamination
Opis:
Fifty samples from five baby food products mainly made of cereal flour(s) were analyzed. The moisture contents of these products were between 11.14% and 11.9%, a level below 14.0%, the recommended level for safe storage of cereal grains and their products. The mycological analysis was carried out using the dilution plate method and two isolation media (DG18 for isolation of xerophilic fungi and DRBC for fungi in general). A total of 80 species related to 37 genera in addition to some unidentified fungal and yeast species were recorded on both media from the five products. The products were contaminated abundantly by xerophilic fungi which were occurring in 88% of food samples and accounting for 18.1% of the total CFU as recorded on DG18. The highest contamination level by xerophiles was registered in Mwebaza rice porridge (a component of rice flour) and the lowest in Mukuza (a product of maize, soyabean and sorghum flours). 11 xerophilic species were recorded of which Aspergillus and Eurotium (4 species each) were the predominant giving rise to 9.1% and 8.9% of the total CFU, with A. wentii, A. candidus, E. cristatum and E. repens were the most contaminating species. Of the fungi recorded other than xerophiles, species of Aspergillus (particularly A. flavus followed by A. niger), Penicillium (P. citrinum, P. oxalicum), Fusarium (F. solani, F. tricinctum), Cladosporium (C. sphaerospermum) and yeasts were the most predominant. Contamination of such foods is a matter of health hazard as these foods are for babies. So, the use of fresh, well-dried and uncontaminated flours for production of such foods is recommended.
Źródło:
Acta Mycologica; 2012, 47, 1
0001-625X
2353-074X
Pojawia się w:
Acta Mycologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of different ripening stages of durian Durio zibethinus fruit on zinc content in liver of rats loaded with cholesterol
Wpływ różnych faz dojrzałości owocu durianu Durio zibethinus na zawartość cynku w wątrobie szczurów obciążonych cholesterolem
Autorzy:
Jesion, I.
Leontowicz, M.
Leontowicz, H.
Gralak, M.A.
Kmiec, H.
Gorinstein, S.
Haruenkit, R.
Powiązania:
https://bibliotekanauki.pl/articles/2630.pdf
Data publikacji:
2014
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
ripening process
durian
Durio zibethinus
fruit
zinc content
liver
rat
cholesterol
Opis:
The effect of different ripening stages of durian Durio zibethinus fruit on zinc content in liver of rats loaded with cholesterol. Durian Durio zibethinus is an exotic, climacteric fruit, rich in dietary fiber, polyphenols, saccharides, vitamins and minerals. Postharvest changes in durian fruit influence its physical and chemical quality, which determined its health protective effect – antioxidant and hypocholesterolemic. Durian is a good source of zinc. The aim of this study was to investigate the zinc content in lyophilisate of durian fruit and in the diets supplemented with durian fruits at different stages of maturity. The in vivo experiment was designed to determine the influence of these diets on zinc content in the liver of rats loaded with cholesterol. The zinc content in durian fruit, in the diets, and in rats livers was examined using a flame atomic absorption spectrophotometry (Perkin-Elemer 1100B). The zinc content in durian fruits ranged from 8.1 to 12.3 mg/kg. The zinc content amounted 45.0, 44.2, 47.1, 47.3 and 48.0 mg/kg in C, ch, chDM, ch DR and chDOR diet, respectively. The content of zinc in the liver in all animal groups was within the normal limits and amounted from 25.0 to 33.0 mg/kg fresh weight. Diet supplemented with durian fruits at different stages of ripening increases accumulation of zinc in the liver of rats loaded with cholesterol. Durian fruits, especially ripe ones, could be used as a natural supplementation of zinc in the diet and might be helpful in prevention of diseases or disorders related to zinc deficiency.
Wpływ różnych faz dojrzałości owocu durianu Durio zibethinus na zawartość cynku w wątrobie szczurów obciążonych cholesterolem. Durian Durio zibethinus to egzotyczny, klimakteryczny owoc, bogaty we włókno pokarmowe, polifenole, oligosacharydy, witaminy i minerały. Zmiany następujące po zbiorze owoców durianu wpływają na ich fizyczne i chemiczne parametry determinujące ich właściwości zdrowotne – przeciwutleniające i hypocholesterolemiczne. Durian jest cennym źródłem cynku. Celem badania było określenie zawartości cynku w owocach durianu, w dietach z dodatkiem durianu w różnych fazach jego dojrzałości. Badanie in vivo miało na celu określenie wpływu tych diet na zawartość cynku w wątrobie szczurów obciążonych cholesterolem. Zawartość cynku w owocach durianu, w dietach i wątrobach oznaczono metodą płomieniowej absorpcji atomowej (Perkin-Elmer 1100B). Zawartość cynku w liofilizacie owoców durianu mieściła się w zakresie 8,1–12,3 mg/kg. Zawartość cynku w dietach: C, ch, chDM, ch DR and chDOR wynosiła odpowiednio 45,0, 44,2, 47,1, 47,3 i 48,0 mg/kg. W wątrobie szczurów wszystkich grup zawartość cynku mieściła się w zakresie wartości referencyjnych i wynosiła od 25,0 do 33,0 mg/kg świeżej masy. Diety z dodatkiem owoców durianu w różnej fazie dojrzałości zwiększają akumulację cynku w wątrobie szczurów obciążonych cholesterolem. Owoce durianu, w szczególności dojrzałe, mogą być stosowane jako naturalny suplement cynku w diecie i być pomocne w prewencji chorób lub stanach związanych z niedoborem cynku.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Animal Science; 2014, 53
1898-8830
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Animal Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mineralogical study and enhanced gravity separation of gold-bearing mineral, South Eastern Desert, Egypt
Autorzy:
El-Sayed, Samah
Abdel-Khalek, N. A.
El-Shatoury, E. H.
Abdel-Motelib, A.
Hassan, M. S.
Abdel-Khalek, M.A.
Powiązania:
https://bibliotekanauki.pl/articles/1845207.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gold
mineralogy
petrography
gravity separation
Falcon concentrator
Opis:
El-Hudi gold deposit, located in the South Eastern Desert of Egypt, represent large vein- type gold occurrence. The representative sample revealed the abundance of quartz as main constituent with minor amounts of mineral impurities. Gold was detectable (12 g/t) as determined using atomic absorption. The petrographic study revealed that the gold grains ranged from 10-40 μm. The grain boundaries of quartz are highly stained with iron minerals as hematite and limonite. Sericite mineral is common in discrete gold-bearing veins. Eroded pyrite was detected with high alteration leaving only cubic-shaped cavities behind. Different techniques for gravity separation were used to separate gold from the quartz mineral. After crushing and grinding of the sample, shaking table was used to upgrade the coarser fractions while Falcon concentrator was employed to upgrade the fine fraction. The best concentrate was obtained through grinding the whole sample to less than 0.2 mm, followed by cleaning steps. The gold content is increased from 12 to 145 g/t with total recovery of 78%.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 5; 839-848
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis, computational, anticancerous and antiproliferative effects of some copper, manganese and zinc complexes with ligands derived from symmetrical 2,2’-diamino-4,4’-dimethyl-1,1’-biphenyl-salicylaldehyde
Autorzy:
Ababneh, Taher S.
El-Khateeb, Mohammad
Tanash, Aissar K.
AL-Shboul, Tareq M.A.
Shammout, Mohammad Jamal A.
Jazzazi, Taghreed M.A.
Alomari, Mohammad
Daoud, Safa
Talib, Wamidh H.
Powiązania:
https://bibliotekanauki.pl/articles/1849324.pdf
Data publikacji:
2021
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
tetradentate schiff base
symmetrical metal complexes
DFT calculation
spectroscopy
anticancerous
antiproliferative
Opis:
Four new symmetrical Schiff bases derived from 2,2’-diamino-4,4’-dimethyl-1,1’-biphenyl-salicylaldehyde have been synthesized and characterized by elemental analysis and different spectroscopic techniques. The reaction of 2,2’-diamino-4,4’-dimethyl-1,1’-biphenyl with two equivalents of 5-tert-butyl-, 3,5-dinitro-, 3,5-dibromo- and 3-tert-butyl-salicylaldehyde yielded 2,2’-bis(5-tert-butyl-salicylideneamino)-4,4’-dimethyl-1,1’-biphenyl (A1) as well as the 3,5-dinitro- (A2), 3,5-dibromo- (A3) and 3-tert-butyl- (A4) substituted derivatives. The tetradentate ligands were then reacted with copper-, manganese- and zinc-acetate producing the tetra-coordinate metal complexes which were characterized by FTIR, UV-Visible spectroscopy, magnetic susceptibility and elemental analysis. Zinc complexes were characterized by 1H-NMR spectroscopy. Density functional theory (DFT) calculations at the B3LYP/6-31G(d) level of theory were carried out to fully optimize and examine the molecular geometries of complexes. Subsequently, IR vibrational and UV-Vis absorption spectra were computed and correlated with the observed values and the results are in good agreement with the experimental data. The anticancerous and antiproliferative activity of the A3 ligand and its metal complexes were determined.
Źródło:
Polish Journal of Chemical Technology; 2021, 23, 1; 7-15
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zapomniany spór o tomizm
The Forgotten Dispute on Thomism
Autorzy:
Tyl, Mirosław
Powiązania:
https://bibliotekanauki.pl/articles/665134.pdf
Data publikacji:
2018
Wydawca:
Wydawnictwo Uniwersytetu Śląskiego
Tematy:
filozofia chrześcijańska
tomizm egzystencjalny
tomizm tradycyjny
światopogląd
A. Siemianowski
H. Bortnowska
B. Celiński
M.A. Krąpiec
J. Tischner
christian philosophy
existential thomism
traditional thomism
world-view
S. Siemianowski
M. A. Krąpiec
Opis:
The aim of the article is the forgotten dispute regarding the world-view value of Thomism, taking place in the early 1960s in the Polish Catholic press. I attempt to present and evaluate the theses and arguments of both sides (critics as well as advocates of Thomism). My claim is that the dispute anticipated the loud discussion with Thomism initiated by J. Tischner in the 1970s and designated the areas of confrontation, as well as, the content and the character of the arguments for and against Thomism.
Przedmiotem artykułu jest zapomniany spór na temat światopoglądowej wartości tomizmu, toczący się na początku lat sześćdziesiątych XX wieku w polskiej prasie katolickiej. Próbuję przedstawić tezy i argumenty obu stron oraz dokonać ich oceny. Twierdzę, że spór ten antycypował głośną dyskusję z tomizmem, podjętą przez J. Tischnera w latach siedemdziesiątych – wyznaczył obszary tej konfrontacji oraz treść i charakter argumentacji za i przeciw.
Źródło:
Folia Philosophica; 2018, 40
1231-0913
2353-9445
Pojawia się w:
Folia Philosophica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of genetic relationships among cultivated and wild pistachios (Pistacia vera L.) using molecular markers
Autorzy:
Pourian, M.A.
Bakhshi, D.
Aalami, A.
Hokmabadi, H.
Powiązania:
https://bibliotekanauki.pl/articles/1880.pdf
Data publikacji:
2019
Wydawca:
Instytut Ogrodnictwa
Tematy:
genetic relationship
molecular marker
microsatellite
Pistacia vera
pistachio
retrotransposon
inter-retrotransposon amplified polymorphism
inter-simple sequence repeat marker
Źródło:
Journal of Horticultural Research; 2019, 27, 1
2300-5009
Pojawia się w:
Journal of Horticultural Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Research on Characterization of Crushability for Foundry Sand Particles
Autorzy:
Dai, Y.
Ma, Q. Y.
Li, X. H.
Zhang, X.
Hu, F. P.
Zhang, Y.
Xie, W. D.
Powiązania:
https://bibliotekanauki.pl/articles/379689.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
foundry sand particle
mechanical load
AFS grain fineness
crushability
piasek odlewniczy
obciążenie mechaniczne
rozdrobnienie ziarna
Opis:
In this paper, crushability of foundry sand particles was studied. Three kinds of in-service silica sands in foundry enterprises selected as the study object, and foundry sand particles were subjected to mechanical load and thermal load during service were analyzed. A set of methods for simulating mechanical load and thermal load by milling and thermal-cold cycling were designed and researched, which were used to characterize the crushability for silica sand particles, the microstructure was observed by SEM. According to the user’s experience in actual application, the crushability of Sand C was the best and then Sand B, the last Sand A. The results indicated that mechanical load, thermal load and thermal-mechanical load can all be used to characterize the crushability of foundry sand particles. Microscopic appearances can qualitatively characterize the crushability of foundry sand particles to a certain extent, combining with the additions and cracks which are observed on the surface.
Źródło:
Archives of Foundry Engineering; 2017, 17, 4; 231-235
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Understanding the Oxide Dispersion Behavior of Yttria in Metal Matrix of MA956 Alloy through High-Energy Milling and Hot Press Sintering
Autorzy:
Swain, B.
Han, D.
Kim, G.-H.
Kong, M.-S.
Ahn, B.
Powiązania:
https://bibliotekanauki.pl/articles/351770.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ODS
mechanical alloying
high-energy milling
oxide particle distribution
Opis:
MA956 (Fe-Cr-Al) alloy powder was high-energy ball milled with various amount of yttria contents (1,2,3, and 4 wt.%) to fabricate an oxide dispersion strengthened alloy. The milled powders were then consolidated using hot press sintering at 1150°C. The surface morphology and crystal structure of MA956 powder during the high-energy milling depending on the yttria contents was investigated using particle size analysis, X-ray diffraction, and scanning electron microscopy. The microstructural analysis of sintered alloy was performed using transmission electron microscopy and energy dispersive spectroscopy to evaluate the dispersion behavior of yttrium oxide. The results showed that, as yttria contents increased, the oxide particles became finer and are uniformly distributed during the high-energy milling. However, after the sintering, the oxide particles were coarsened with more than 3 wt.% of yttria addition.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1377-1381
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Role of metabolic enzymes in resistance to chlorpyrifos-methyl in the cowpea aphid, Aphis craccivora (Koch)
Autorzy:
Mokbel, E.M.S.
Swelam, E.S.H.
Radwan, E.M.M.
Kandil, M.A.-E.
Powiązania:
https://bibliotekanauki.pl/articles/66464.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metabolic enzyme
resistance
chlorpyrifos-methyl insecticide
insecticide
cowpea aphid
aphid
Aphis craccivora
Opis:
The cowpea aphid, Aphis craccivora management relies mainly on chemical control. As a result extensive and repeated treatment of insecticides has led to the development of aphid resistance to commonly used insecticides. To investigate chlorpyrifos-methyl resistance in A. craccivora, a field strain was selected for 24-generations to achieve a resistance factor of 82.3 fold compared with a susceptible strain. In the resistant strain, malathion and lambda-cyhalothrin exhibited obvious cross-resistance; while fenvalerate and dinotefuran showed moderate cross-resistance. In contrast, slight or no cross-resistance was obtained with the other tested insecticides. To investigate metabolic resistance mechanisms, integration of biochemical and synergism assays was conducted. Results showed the key role of esterase (EST) and mixed function oxidases (MFO); however, glutathione-s-transferase (GST) contributed less to resistance. Cross-resistance studies showed the need for rotation with non-cross resistant insecticides as a resistance management tactic.
Źródło:
Journal of Plant Protection Research; 2017, 57, 3
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Expression of endothelin-1, and endothelin A and B receptors in portal hypertensive esophagus of rats
Autorzy:
Ohta, M.
Pai, R.
Kawanaka, H.
Ma, T.
Sugimachi, K.
Sarfeh, I.J.
Tarnawski, A.S.
Powiązania:
https://bibliotekanauki.pl/articles/70561.pdf
Data publikacji:
2000
Wydawca:
Polskie Towarzystwo Fizjologiczne
Tematy:
nitric oxide
endothelin receptor
portal hypertension
oesophagus
oesophageal varix
endothelin-1
rat
Źródło:
Journal of Physiology and Pharmacology; 2000, 51, 1
0867-5910
Pojawia się w:
Journal of Physiology and Pharmacology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prediction of littoral drift with adaptive neuro-fuzzy inference system
Ocena dryfu morskiego z wykorzystaniem systemu ANFIS [Adaptive Neuro-Fuzzy Inference System]
Autorzy:
Sabet, M S
Naseri, M.A.
Sabet, H.S.
Powiązania:
https://bibliotekanauki.pl/articles/81613.pdf
Data publikacji:
2010
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
littoral sand drift
coastal zone
adaptive neuro-fuzzy inference system
validation
physical process
database
Opis:
The amount of sand moving parallel to a coastline forms a prerequisite for many harbor design projects. Such information is currently obtained through various empirical formulae. Despite so many works in the past, an accurate and reliable estimation of the rate of sand drift has still remained a problem. It is a non-linear process and can be described by chaotic time-series. The current study addresses this issue through the use of Adaptive Neuro-Fuzzy Inference System (ANFIS). ANFIS is about taking an initial fuzzy inference system (FIS) and tuning it with a back propagation algorithm based on the collection of input-output data. ANFIS was developed to predict the sand drift from a variety of causative variables. The structure and algorithm of ANFIS for predicting the rate of sand drift is described. The Adaptive Neuro-Fuzzy Inference System was validated by confi rming its consistency with a database of specifi ed physical process.
W artykule przedstawiono adaptację systemu ANFIS do oceny wielkości dryfu fal piaskowych poruszających się wzdłuż wybrzeża morskiego. Pomimo wielu informacji o charakterze ilościowym oraz jakościowym zebranych w badaniach terenowych oraz opracowanych wzorów empirycznych opisujących analizowane zjawisko, autorzy widzą potrzebę stosowania symulacji zjawiska za pomocą metod numerycznych. Takie możliwości daje omówiony w pracy system ANFIS.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation; 2010, 42, 1; 159-167
0208-5771
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Land Reclamation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical study of hydrodynamic derivatives and course stability under ship-bank interaction
Autorzy:
Liu, H.
Ma, N.
Gu, X. C.
Powiązania:
https://bibliotekanauki.pl/articles/116925.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
safety at sea
ship-bank interaction
Reynolds-Averaged Navier-Stokes (RANS)
hydrodynamic derivatives
hydrodynamics
Planar Motion Mechanism (PMM)
Circulating Water Channel (CWC)
User Defined Functions (UDF)
Opis:
Since ship-bank interaction affects the manoeuvrability of a ship navigating close to a bank, the determination of hydrodynamic derivatives is of great importance to assess the ship manoeuvrability. To obtain the hydrodynamic derivatives of the KVLCC2 model ship with different water depths and ship-bank distances, the simulation of PMM tests are carried out using an unsteady Reynolds-Averaged Navier–Stokes (RANS) based solver. Hybrid dynamic mesh technique is proposed to realize the simulation of pure yaw tests in confined water. Studies on the grid convergence and time-step-size convergence are firstly performed. Hydrodynamic derivatives for the ship in different water depths and ship-bank distances are compared. The course stability is investigated based on time-domain simulations and eigenvalue analysis, and the results show that the ship-bank interaction and shallow water effect have a remarkable influence on the course stability.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2018, 12, 4; 747-753
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis And Electrochemical Characteristics Of Mechanically Alloyed Anode Materials SnS2 For Li/SnS2 Cells
Synteza mechaniczna i charakterystyka elektrochemiczna materiałów anodowych SnS2 dla ogniw Li/SnS2
Autorzy:
Hong, J. H.
Liu, X. J.
Park, D. K.
Kim, K. W.
Ahn, H. J.
Ahn, I. S.
Powiązania:
https://bibliotekanauki.pl/articles/356903.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
MA
Li/SnS2 cell
PCA
wet milling process and electrochemical characteristics
ogniwa Li/SnS2
charakterystyka elektromechaniczna
Opis:
With the increasing demand for efficient and economic energy storage, tin disulfide (SnS2), as one of the most attractive anode candidates for the next generation high-energy rechargeable Li-ion battery, have been paid more and more attention because of its high theoretical energy density and cost effectiveness. In this study, a new, simple and effective process, mechanical alloying (MA), has been developed for preparing fine anode material tin disulfides, in which ammonium chloride (AC), referred to as process control agents (PCAs), were used to prevent excessive cold-welding and accelerate the synthesis rates to some extent. Meanwhile, in order to decrease the mean size of SnS2 powder particles and improve the contact areas between the active materials, wet milling process was also conducted with normal hexane (NH) as a solvent PCA. The prepared powders were both characterized by X-ray diffraction, Field emission-scanning electron microscopeand particle size analyzer. Finally, electrochemical measurements for Li/SnS2 cells were takenat room temperature, using a two-electrode cell assembled in an argon-filled glove box and the electrolyte of 1M LiPF6 in a mixture of ethylene carbonate(EC)/dimethylcarbonate (DMC)/ethylene methyl carbonate (EMC) (volume ratio of 1:1:1).
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1191-1194
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
From waste to treat waste : exploitation of marble dust as a harmful pollutant to a green adsorbent for dyes and heavy metals from industrial wastewater
Autorzy:
Attia, H.A.
Farghaly, Mohamed G.
Saleh, A.M.
Abdel Khalek, M.A.
Powiązania:
https://bibliotekanauki.pl/articles/2175448.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
marble dust
pollutant
adsorbent
dye
heavy metals
textile wastewater
Opis:
The marble dust as a harmful industrial waste of marble fabrication was evaluated as aneconomical and efficient green adsorbent for Acid Red-1 dye and lead ions. The XRD, XRF, particle size, surface area and zeta-potential measurements were used to characterize the marble dust. The removal efficiency was optimized by studying several parameters such as pH, temperature, contact time, adsorbent dose and initial concentration. The optimum removal was achieved at pH 6, 20°C after 60 min in the presence of 2.5g/L marble dust. The rates of adsorption were found to follow the pseudo-second-order model. The results showed better fitting to Freundlich isotherm. The thermodynamic studies revealed that the adsorption process is spontaneous, exothermic and favorable at low temperature. The free energy (∆G°), enthalpy (∆H°), and entropy (∆S°) changes were calculated to predict the nature of adsorption.The removal efficiency was improved by calcination of the marble at 700°C. Application for textilewastewater showed high removal efficiency up to 99.9%of inorganic and organic pollutants. The product of treatment was used in the concrete and bricks manufactured, so there is nogeneration of second-order pollutants.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 6; art. no. 154007
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies