Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "alloy" wg kryterium: Temat


Tytuł:
Microstructure and Fatigue Life of the Binary Lead-free Alloys with High Zn Content
Autorzy:
Pietrzak, K.
Klasik, A.
Maj, M.
Sobczak, N.
Powiązania:
https://bibliotekanauki.pl/articles/382479.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
lead free alloy
alloy microstructure
mechanical properties
stop bezołowiowy
mikrostruktura stopu
właściwości mechaniczne
Opis:
The results of studies presented in this article are an example of the research activity of the authors related to lead-free alloys. The studies covered binary SnZn90 and SnZn95 lead-free alloys, including their microstructure and complex mechanical characteristics. The microstructure was examined by both light microscopy (LM) and scanning electron microscopy (SEM). The identification of alloy chemical composition in micro-areas was performed by SEM/EDS method. As regards light microscopy, the assessment was of both qualitative and quantitative character. The determination of the geometrical parameters of microstructure was based on an original combinatorial method using phase quantum theory. Comprehensive characterization of mechanical behavior with a focus on fatigue life of alloys was performed by means of the original modified low cycle fatigue method (MLCF) adapted to the actually available test machine. The article discusses the fatigue life of binary SnZn90 and SnZn95 alloys in terms of their microstructure. Additionally, the benefits resulting from the use of the combinatorial method in microstructure examinations and MLCF test in the quick estimation of several mechanical parameters have been underlined.
Źródło:
Archives of Foundry Engineering; 2018, 18, 4; 65-70
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Researching the Influence of Chemical Composition and Technological Parameters on the Quality of Copper Alloys
Autorzy:
Rzadkosz, S.
Kozana, J.
Kranc, M.
Powiązania:
https://bibliotekanauki.pl/articles/379548.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
copper alloy
Cu-Zn alloy
mechanical properties
alloying additives
alloy refining
stop miedzi
stop Cu-Zn
właściwości mechaniczne
dodatki stopowe
rafinacja stopu
Opis:
The work presents the results of process efficiency of refining liquid copper with special refining agents and the analysis results of the influence of alloying components on the structure and properties of the chosen alloys. The research undertaken aimed at evaluation of the influence of alloying additives, such as aluminium, silicon and also cobalt in the chosen Cu-Zn alloys. The microstructures were researched with the help of light and scanning microscopy together with X-ray microanalysis to determine significant changes of mechanical properties.
Źródło:
Archives of Foundry Engineering; 2013, 13, 1 spec.; 153-158
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Degradation of Creep Resistant Ni - alloy During Aging at Elevated Temperature Part I: Mechanical Properties
Autorzy:
Kaczorowski, M.
Skoczylas, P.
Gulbinowicz, Z.
Powiązania:
https://bibliotekanauki.pl/articles/381428.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
creep resistant alloy
Ni alloy
mechanical properties
hydrogen embrittlement
stop żarowytrzymały
stop Ni
właściwości mechaniczne
kruchość wodorowa
Opis:
The results of experimental study of mechanical properties degradation of creep resistant Ni-base alloy are presented. The material studied was subjected to long-term influence of high pressure hydrogen atmosphere at temperature 750K and 850K. The mechanical properties of specimens taken at different distance from inner surface of thick wall tube were evaluated. The results of mechanical testing showed distinct influence of the temperature on mechanical properties of Ni creep resistant alloy. Moreover, the mechanical properties of studied alloy depend on the location of the specimen with respect to the dissociated ammonia source i.e. distance from the inner surface of the chamber. The results of mechanical testing show that the higher the distance from inner surface of the chamber the better mechanical properties of studied Ni base super-alloy.
Źródło:
Archives of Foundry Engineering; 2015, 15, 3 spec.; 25-28
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigations of the structure and hardness of dissimilar steel-to-aluminum joints made using laser welding technology
Autorzy:
Misiura, Karolina
Konieczny, Jarosław
Labisz, Krzysztof
Boris, Renata
Powiązania:
https://bibliotekanauki.pl/articles/2098135.pdf
Data publikacji:
2021
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
aluminium alloy
non-alloy steel
laser welding
microstructure
structure
stop aluminium
stal niestopowa
spawanie laserowe
mikrostruktura
struktura
Opis:
Since welding technology is currently used to assemble the frame of driver’s seats, it is important to develop laser welding technology for steel and aluminium. For this reason, the purpose of the present work was to examine the structure and selected properties of aluminium-steel joints using the example of an EN AW-6060 aluminium alloy and DC04 low-alloy steel welded in laser technology. Overlapping joints were made, weld type -following the hole laser welding method -laser beam (LB) using a high power disk laser (TRUMPF TruDisk3302), in which the active medium is a yttrium-aluminium crystal (YAG). Metallographic microstructure investigations were carried out using a light microscope from Carl Zeiss - Observer Z1m, and the weld microstructures were investigated using an SEM Supra 35 microscope, also from Carl Zeiss. The chemical composition analysis in micro-areas was carried out using an X-ray energy dispersion spectrometer from EDAX, which was a part of the SEM Supra 35. The hardness of the substrate material and the welded area was measured following the Vickers method using an FM-ARS 9000 micro hardness tester from Tokyo, Japan. It was found that there is a potential for commercial use of laser welding to make a low-carbon steel-aluminium alloy joint. During the formation of the weld in its microstructure, intermetallic compounds of the FexAly type were created, which significantly reduced the mechanical and plastic properties of the joint. The hardness of the weld created wasabout seven times higher than that of DC04 carbon steel. The choice of laser welding parameters (primarily, laser power and beam speed) significantly impacted the weld structure and properties.
Źródło:
Transport Problems; 2021, 16, 1; 73--86
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of thermo-derivative analysis conditions on microstructure of the Al-Si-Cu alloy
Autorzy:
Dobrzański, L. A.
Krupiński, M.
Labisz, K.
Rdzawski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/380745.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminium alloy
thermo derivative analysis
UMSA
alloy microstructure
mechanical properties
stop aluminium
analiza termopochodna
mikrostruktura stopu
właściwości mechaniczne
Opis:
Microstructure change of the metals and alloys as a result of variable crystallisation conditions also by mind of cooling rate change influence the mechanical properties. In this work there are presented the interdependences between the cooling rate, chemical composition and microstructure of the cast aluminium alloy Al–Si–Cu as a result of the thermo-derivative analysis, using the UMSA (Universal Metallurgical Simulator and Analyzer) device. An important tool for the microstructure evaluation of the Al type AC-AlSi7Cu3Mg alloy was the light and electron scanning microscopy technique.
Źródło:
Archives of Foundry Engineering; 2011, 11, 2 spec.; 19-22
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of casting defects on fatigue resistance of elektron 21 magnesium alloy
Autorzy:
Pikos, I.
Kiełbus, A.
Adamiec, J.
Powiązania:
https://bibliotekanauki.pl/articles/383305.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
casting defect
mechanical properties
microstructure
magnesium alloy
Elektron 21 alloy
wada odlewu
właściwości mechaniczne
mikrostruktura
stop magnezu
stop Elektron 21
Opis:
The Mg-RE alloys are attractive, constructional materials, especially for aircraft and automotive industry, thanks to combination of low density, good mechanical properties, also at elevated temperature, and good castability and machinability. Present paper contains results of fatigue resistance test carried out on Elektron 21 magnesium alloy, followed by microstructural and fractographical investigation of material after test. The as-cast material has been heat treated according to two different procedures. The fatigue resistance test has been conducted with 106 cycles of uniaxial, sine wave form stress between 9 MPa and 90 MPa. Fractures of specimens, which ruptured during the test, have been investigated with scanning electron microscope. The microstructure of specimens has been investigated with light microscopy. Detrimental effect of casting defects, as inclusions and porosity, on fatigue resistance has been proved. Also the influence of heat treatment's parameters has been described.
Źródło:
Archives of Foundry Engineering; 2013, 13, 2; 103-106
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Chemical Composition and Parameters of Heat Treatment on the Mechanical Properties and Electrical Conductivity in Hypoeutectic Aluminium Silicon Alloys
Badania nad wpływem składu chemicznego oraz parametrów obróbki cieplnej na własności mechaniczne i elektryczne stopów aluminium z grupy siluminów podeutektycznych
Autorzy:
Wiecheć, J.
Uliasz, P.
Knych, T.
Piwowarska-Uliasz, M.
Jarosz, R.
Powiązania:
https://bibliotekanauki.pl/articles/381346.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heat treatment
aluminum alloy
hypoeutectic silicon alloy
mechanical properties
electrical properties
obróbka cieplna
stop aluminium
silumin podeutektyczny
właściwości mechaniczne
właściwości elektryczne
Opis:
The silumins are the aluminum alloys with the silicon as the main alloy addition. These are one of the most common types of casting alloys based on aluminum. They are widely used in technologies of casting such as sand casting, chill casting or pressure die casting. As their main characteristics we can include: very good castabillity, corrosion resistance, high mechanical properties and good thermal and electrical conductivity. Thanks to all these properties, the cast aluminum alloys have been used in various industries such as: automotive, engineering, heat exchangers or conductive elements. The last application requires a specific conditions of the process and the optimal chemical composition of the alloy, which allows to obtain high values of conductivity. The paper presents a study covering the impact of silicon content and heat treatment parameters on the electrical conductivity and mechanical properties (hardness HB) hypoeutetic silumin alloys such as AlSi11Mg, AlSi7Mg and AlSi5Mg. The aim of the study was to determine the optimal conditions for heat treatment parameters of various alloys providing to the most favorable mechanical and electrical properties.
Siluminy, czyli stopy aluminium z głównym dodatkiem w postaci krzemu, są jednymi z najczęściej stosowanych typów stopów odlewniczych na bazie aluminium. Są one wykorzystywane w szeregu technologiach odlewniczych takich jak: odlewanie piaskowe, kokilowe czy odlewanie nisko lub wysoko ciśnieniowe. Do podstawowych własności tej grupy stopów możemy zaliczyć bardzo dobrą lejność, odporność na działanie środowiska korozyjnego, wysokie własności mechaniczne oraz dobrą przewodność cieplną i elektryczną. Dzięki tym własnościom, główne zastosowanie odlewów z siluminów to przemysł samochodowy, maszynowy, elementy konstrukcyjne, wymienniki ciepła czy elementy przewodzące prąd elektryczny. Ta ostatnia aplikacja wymaga zapewnienia szczególnych warunków procesu technologicznego oraz odpowiedniego składu chemicznego stopu, tak aby uzyskać wysokie wartości przewodnictwa. W pracy przedstawiono badania obejmujące wpływ zawartości krzemu oraz parametrów obróbki cieplnej na przewodność elektryczną i własności mechaniczne (twardość HB) siluminów podeutektycznych typu AlSi11Mg, AlSi7Mg oraz AlSi5Mg. Celem badań było określenie optymalnych warunków obróbki cieplnej poszczególnych stopów umożliwiających uzyskanie najkorzystniejszych własności mechanicznych i elektrycznych.
Źródło:
Archives of Foundry Engineering; 2013, 13, 3 spec.; 179-184
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure and Mechanical Properties of AlSiCuMg Alloy after Thermo Processing
Autorzy:
Piątkowski, J.
Kamiński, P.
Powiązania:
https://bibliotekanauki.pl/articles/379577.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
hypereutectic Al-Si alloy
overheating
CuP10 master alloy
mechanical properties
microstructure
stop nadeutektyczny Al-Si
przegrzanie
stop CuP10
właściwości mechaniczne
Opis:
In the dissertation it has been shown, that so called „time-thermal treatment” (TTT) of the alloy in liquid state, as overheating the metal with around 250°C above the Tliq. and detaining it in this temperature for around 30 minutes, improves the mechanical properties (HB, Rm, R0,2). It was ascertained, that overheating the AlSi17Cu5Mg alloy aids the modification, resulting with microcrystalline structure. Uniform arrangement of the Si primeval crystals in the warp, and α(Al) solution type, supersaturated with alloying elements present in the base content (Cu, Mg) assures not only increased durability in the ambient temperature, but also at elevated temperature (250°C), what is an advantage, especially due to the use in car industry.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1; 79-82
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of structure and properties of welded joint of magnesium alloy EZ33A-T5
Autorzy:
Kocurek, R.
Adamiec, J.
Powiązania:
https://bibliotekanauki.pl/articles/380590.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mechanical properties
weldability of alloy
magnesium alloy
EZ33
microstructure
quantitative procedure
właściwości mechaniczne
spawalność stopu
stop magnezu
mikrostruktura stopu
metoda ilościowa
Opis:
In recent years, improvement of casting magnesium alloys welding technology has resulted in an increase in the number of publications on this topic. The symptom of this trend is to replace traditional construction materials of magnesium alloys. Magnesium alloys of Mg-Zn-RE-Zr group are used in the automotive, aerospace and defense industries, mainly as gravitional casts to sand moulds or die-casting. Casting defects often appear in these casts (misruns, micro-shrinkage, cracks). The welding technologies are most often applicable to repair of casts, mainly nonconsumable electrode welding in the inert gas cover. The premise of this research work was to define structure and mechanical properties of welded joints of magnesium alloy EZ33A-T5. For this purpose, were attempted trails welding and conducted non-destructive testing, metallographic and strength mechanical tests allowing to assess the properties of welded joints. Evaluation of properties of welded joints was possible by carrying out welding trials and execution of non-destructive tests and metallographic. Research of the microstructure was used with the methodology and test procedures for the quantitative evaluation of the structure of welded joints which was developed in the Department of Materials Science of Silesian University of Technology.
Źródło:
Archives of Foundry Engineering; 2013, 13, 1 spec.; 65-71
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the Effect of the Cr, Mo, V and W Content in an Al-Si Alloy Used for Pressure Casting on its Proof Stress
Autorzy:
Szymczak, T.
Szymszal, J.
Gumienny, G.
Powiązania:
https://bibliotekanauki.pl/articles/380502.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mechanical properties
statistical method
multicomponent alloy
Al-Si alloy
pressure casting
proof stress
właściwości mechaniczne
metoda statystyczna
stop wieloskładnikowy
stop Al-Si
odlewanie ciśnieniowe
Opis:
The study presents the results of the application of a statistical analysis for the evaluation of the effect of high-melting additions introduced into a pressure cast Al-Si alloy on the obtained level of its proof stress Rp0.2. The base Al-Si alloy used for the tests was a typical alloy used for pressure casting grade EN AC-46000. The base alloy was enriched with high-melting additions, such as: Cr, Mo, V and W. The additions were introduced into the base Al-Si alloy in all the possible combinations. The content of the particular high-melting addition in the Al-Si alloy was within the scope of 0.05 to 0.50%. The investigations were performed on both the base alloy and alloy with the high-melting element additions. Within the implementation of the studies, the values of Rp0.2 were determined for all the considered chemical compositions of the Al-Si alloy. A database was created for the statistical analysis, containing the independent variables (chemical composition data) and dependent variables (examined Rp0.2 values). The performed statistical analysis aimed at determining whether the examined high-melting additions had a significant effect on the level of Rp0.2 of the Al-Si alloy as well as optimizing their contents in order to obtain the highest values of the Al-Si alloy's proof stress Rp0.2. The analyses showed that each considered high-melting addition introduced into the Al-Si alloy in a proper amount can cause an increase of the proof stress Rp0.2 of the alloy, and the optimal content of each examined high-melting addition in respect of the highest obtained value of Rp0.2 equals 0.05%.
Źródło:
Archives of Foundry Engineering; 2018, 18, 2; 105-111
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of the strain path and the second phase particles on the microstructure and the texture evolution of the AA3104 alloy processed by ECAP
Wpływ schematu odkształcenia oraz cząstek drugiej fazy na rozwój mikrostruktury i tekstury stopu AA3104 przetwarzanego metodą wyciskania w kanale równokątowym
Autorzy:
Paul, H.
Baudin, T.
Brisset, F.
Powiązania:
https://bibliotekanauki.pl/articles/351090.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ECAP
mikrostruktura
tekstura
stopy aluminium
microstructure
texture
shear band
aluminium alloy
Opis:
The effect of the strain path on the microstructure and the texture evolution of the severely deformed AA3104 aluminium alloy was investigated by a transmission electron microscopy (TEM) and a high resolution scanning electron microscopy (SEMFEG) equipped with the electron backscattered diffraction facility. A commercial purity material was deformed at room temperature via equal channel angular pressing up to 10 passes, following the routes A, BC, and C. A good quality billet after 10 passes was obtained only in the case of route C. In the case of route A and BC, macro-cracking appeared after 5 and 3 passes, respectively. Although the different routes led to differences in the microstructure of the billets, the global texture evolution turned out to follow nearly the same course. The TEM observations and the SEMFEG local orientation measurements allowed to identify the misoriented planar dislocation arrangements in all the samples. Their instability within some narrow areas led to the kink-type bands, which were precursors of the shear bands. The influence of the second phase particles on the deformation microstructure and the local texture depended on the particle size. Irrespective of the applied deformation routes, the large (>5 μm), not deformable second phase particles influenced the strengthening of the matrix by forming local distortions in their vicinity, whereas the fine dispersoids (∼50 nm) had a visibly unclear effect on the dislocation structures formed in the examined strain range.
W pracy analizowano wpływ zmiany drogi odkształcenia na ewolucję mikrostruktury i tekstury silnie odkształcanych próbek stopu aluminium - AA3104, wykorzystując techniki transmisyjnej (TEM) i skaningowej (SEMFEG) mikroskopii elektronowej. Materiał o czystości technicznej odkształcano w temperaturze otoczenia, w matrycy równo kątowej (ECAP) do 10-ciu przepustów, wg drogi A, BC oraz C. Wyniki prowadzonych analiz pokazują, że jedynie w przypadku drogi C uzyskano po 10-ciu przepustach dobry jakościowo wstępniak. W przypadku drogi A i BC po 5 i 3 przepustach, odpowiednio, pojawiały się obserwowane makroskopowo pęknięcia. Pomimo, że zróżnicowane drogi odkształcenia prowadzą do silnego zróżnicowania w obrazie mikrostruktury, ewolucja tekstury globalnej jest podobna. Obserwacje mikrostrukturalne prowadzone w skali TEM oraz pomiary orientacji lokalnych z wykorzystaniem techniki SEMFEG dokumentują formowanie się płaskich układów dyslokacyjnych, niezależnie od zastosowanego schematu odkształcenia. Dodatkowo obserwowana wewnątrz wąskich obszarów niestabilność tych struktur prowadzi do pojawienia się pasm ugięcia które są prekursorami pasm ścinania. Wpływ cząstek drugiej fazy na ewolucję struktury odkształcenia oraz zmiany w lokalnym obrazie tekstury w pobliżu cząstek, silnie uzależnione są od rozmiaru cząstek. Jednakże, niezależnie od zastosowanego schematu odkształcenia, duże (>5 μm) nieodkształcalne cząstki silnie determinują umocnienie osnowy w ich bezpośrednim sąsiedztwie, podczas gdy wpływ drobnych wydzieleń dyspersyjnych (∼50 nm) nie jest jasno zdefiniowany.
Źródło:
Archives of Metallurgy and Materials; 2011, 56, 2; 245-261
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of Impact of Nickel Additions on Tin Bronzes
Autorzy:
Kozana, J.
Garbacz-Klempka, A.
Piękoś, M.
Czekaj, J.
Perek-Nowak, M.
Powiązania:
https://bibliotekanauki.pl/articles/382525.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wear resistant alloys
tin bronze
microstructure
alloy additives
Cu–Sn–Ni alloy
stopy odporne na zużycie
brąz cynowy
mikrostruktura
dodatki stopowe
stop Cu-Sn-Ni
Opis:
High prices of tin and its limited resources, as well as several valuable properties characterising Cu-Sn alloys, cause searching for materials of similar or better properties at lower production costs. The influence of various nickel additions to CuSn10 casting bronze and to CuSn8 bronze of a decreased tin content was tested. Investigations comprised melting processes and casting of tin bronzes containing various nickel additions (up to 5%). The applied variable conditions of solidification and cooling of castings (metal and ceramic moulds) allowed to assess these alloys sensitivity in forming macro and microstructures. In order to determine the direction of changes in the analysed Cu-Sn-Ni alloys, the metallographic and strength tests were performed. In addition, the solidification character was analysed on the basis of the thermal analysis tests. The obtained results indicated the influence of nickel in the solidification and cooling ways of the analysed alloys (significantly increased temperatures of the solidification beginning along with increased nickel fractions in Cu-Sn alloys) as well as in the microstructure pattern (clearly visible grain size changes). The hardness and tensile strength values were also changed. It was found, that decreasing of the tin content in the analysed bronzes to which approximately 3% of nickel was added, was possible, while maintaining the same ultimate tensile strength (UTS) and hardness (HB) and improved plasticity (A5).
Źródło:
Archives of Foundry Engineering; 2018, 18, 1; 53-60
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Modifier on the Microstructure of the AlSi10CuNiMn Alloy
Autorzy:
Cais, Jaromir
Heinrich, Jiri
Jirounkova, Klara
Powiązania:
https://bibliotekanauki.pl/articles/103309.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
Al-Si alloy
microstructure
modification
microscopy
stop Al-Si
mikrostruktura
modyfikacja
mikroskopia
Opis:
This paper deals with different types of modifiers and their effect on the microstructure of the Al-Si alloy. For the purposes of this research, strontium, antimony and calcium were used as the modifiers of the AlSi10CuNiMn alloy. Unmodified alloy was cast in order to be compared with the alloy modified by different modifiers in various concentrations. The results of this research were analysed via light and electron microscopy.
Źródło:
Advances in Science and Technology. Research Journal; 2020, 14, 2; 13-18
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of Densification Process and Structure of PM Al-Mg-Si-Cu-Fe and Al-Zn-Mg-Cu-Sn Alloys
Analiza procesu zagęszczania i struktury spiekanych stopów Al-Mg-Si-Cu-Fe i Al-Zn-Mg-Cu-Sn
Autorzy:
Bidulský, R
Bidulská, J.
Actis Grande, M.
Powiązania:
https://bibliotekanauki.pl/articles/355248.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
powder metallurgy
aluminium alloy
compressibility
microstructure
metalurgia proszków
stop aluminium
ściśliwość
mikrostruktura
Opis:
The paper is focused on the role of the pressing pressure on the densification behaviour of PM aluminium alloys. Commercially aluminium based powders Al-Mg-Si-Cu-Fe and Al-Zn-Mg-Cu-Sn were used as materials to be investigated. The apparent density of the powder mixes was determined according to MPIF St. 04. A set of cylinder test specimen 55x10x10 mm3 was uniaxially pressed in a floating hardened steel die. Compaction pressures ranged from 50 MPa up to 700 MPa. Considering the densification of metal powders in uniaxial compaction, quantification of aluminium compaction behaviour was performed. The compressibility behaviour was evaluated, considering the effect on specimens, as well as on their microstructure. The development of compressibility values with pressing pressure enables to characterize the effect of particles geometry and matrix plasticity on the compaction process.
Przedmiotem pracy jest wpływ ciśnienia prasowania na zagęszczanie proszków stopów aluminium. Materiałem badanym były komercyjne proszki aluminium Al-Mg-Si-Cu-Fe I Al-Zn-Mg-Cu-Sn. Gęstość pozorna mieszanek proszków określono według MPIF St.04. Cylindryczne próbki 55x10x10 mm3 ściskane były jednokierunkowo w samonastawnej matrycy z hartowanej stali. Nacisk wahał się od 50 MPa do 700 MPa. Biorąc pod uwagę zagęszczenie proszków metali w trakcie prasowania jednoosiowego, przeprowadzono kwantyfikacje zagęszczania aluminium. Oceniono zachowanie ściśliwości biorąc pod uwagę wpływ na próbki, jak również na ich mikrostrukturę. Zestawienie wartości ściśliwości z ciśnieniem prasowania pozwala scharakteryzować wpływ geometrii cząstek i plastyczności matrycy na proces prasowania.
Źródło:
Archives of Metallurgy and Materials; 2014, 59, 1; 17-23
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on Extruded Products of MgAlZn Alloys – Microstructure and Mechanical Properties
Badania wyrobów wyciskanych ze stopów MgAlZn – mikrostruktura i właściwości mechaniczne
Autorzy:
Płonka, B.
Remsak, K.
Korczak, P.
Lech-Grega, M.
Rajda, M.
Powiązania:
https://bibliotekanauki.pl/articles/352361.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnesium alloy
extrusion
mechanical properties
structure
stop magnezu
wyciskanie
właściwości mechaniczne
struktura
Opis:
The aim of the study was to test and assess products extruded from the magnesium alloys type MgAlZn: AZ31, AZ61 and AZ80A alloys in the form of Ø35mm round bars and 80x15mm flat bars. The test material was extruded in a direct system with the ram feed speed of 1 mm/s and the extrusion ratio λ = 7 ÷ 9. The extruded bars were examined in as-extruded state and after heat treatment to the T5 temper and T6 temper. The strength properties were tested and microstructure was examined with calculation of the average grain size.
Praca miała na celu zbadanie wyrobów uzyskanych w procesie wyciskania stopów magnezu typu MgAlZn: AZ 31, AZ 61 oraz AZ 80A w postaci prętów Ø35mm oraz płaskowników 80x15mm. Materiał do badań został wyciśnięty w systemie współbieżnym z prędkością posuwu tłoka 1 mm/s, przy współczynniku wydłużenia λ=7÷9. Wyciśnięte pręty analizowano w stanie wyciskanym oraz po obróbce cieplnej do stanu T5 i T6. Zbadano ich właściwości wytrzymałościowe jak również poddano analizie mikrostruktury z określeniem średniej wielkości ziarna.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 4; 2977-2980
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental study of Fe-Ni-Ti-Cr system
Autorzy:
Hoppe, Viktoria
Gibas, Anna
Grzegorczyk, Weronika
Małecki, Marcin
Hasiak, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/1188070.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
właściwości mechaniczne
stopy z pamięcią kształtu
stop Fe-Ni-Ti
stop Fe-Ni-Ti-Cr
mechanical properties
shape memory alloys
Fe-Ni-Ti alloy
Fe-Ni-Ti-Cr alloy
Opis:
The research comprises a discussion about a formation of intermetallic phase with stoichiometric composition Fe2Ti, called Laves phase, and influence of chromium on the whole structure containing this phase by means of comparison of the two alloys. A base Fe35Ni35Ti30 alloy was used as a reference and then compared with a Fe-Ni-Ti chromium doped - Fe30Ni35Ti30Cr5 alloy. The study of microstructure performed with scanning electron microscope enabled to distinguish different phases. These regions are rich in mixture of Fe-Ni and Ti-Ni elements. The identified phases are Fe2Ti and Ni3Ti which was confirmed by X-ray diffraction and simultaneously it is consistent with energy dispersive spectroscopy results. Differential scanning calorimetry confirmed also multi-phase composition. As a result different hardness was measured for these phases using nanoindentation. The overall hardness was established using the Vickers method.
Źródło:
Interdisciplinary Journal of Engineering Sciences; 2019, 7, 1; 1--14
2300-5874
Pojawia się w:
Interdisciplinary Journal of Engineering Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Formation of Structure and Properties in Casting Processes on the Example of AZ91 Magnesium Alloy
Autorzy:
Augustyn, B.
Szymanek, M.
Kapinos, D.
Boczkal, S.
Korczak, P.
Powiązania:
https://bibliotekanauki.pl/articles/383152.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technologies
innovative foundry materials
magnesium alloy
AZ91 alloy
RS process
mechanical properties
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
stop magnezu
stop AZ91
właściwości mechaniczne
Opis:
Contemporary materials engineering requires the use of materials characterised by high mechanical properties, as these precisely properties determine the choice of material for parts of machinery and equipment. Owing to these properties it is possible to reduce the weight and, consequently, the consumption of both material and energy. Trying to meet these expectations, the designers are increasingly looking for solutions in the application of magnesium alloys as materials offering a very beneficial strength-to-weight ratio. However, besides alloying elements, the properties are to a great extent shaped by the solidification conditions and related structure. The process of structure formation depends on the choice of casting method forced by the specific properties of casting or by the specific intended use of final product. The article presents a comparison of AZ91 magnesium alloys processed by different casting technologies. A short characteristic was offered for materials processed by the traditional semi-continuous casting process, which uses the solidification rates comprised in a range of 5 - 20⁰C/s, and for materials made in the process of Rapid Solidification, where the solidification rate can reach 106⁰C/s. As a result of the casting process, a feedstock in the form of billets and thin strips was obtained and was subjected next to the process of plastic forming. The article presents the results of structural analysis of the final product. The mechanical properties of the ø7 mm extruded rods were also evaluated and compared.
Źródło:
Archives of Foundry Engineering; 2014, 14, 2; 43-48
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The mechanical properties of AlSi17Cu5 cast alloy after overheating and modification of CuP master alloy
Autorzy:
Piątkowski, J.
Jabłońska, M.
Powiązania:
https://bibliotekanauki.pl/articles/380532.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
hypereutectic Al-Si alloy
overheating
modification
CuP10 master alloy
mechanical properties
plastic properties
stop nadeutektyczny Al-Si
przegrzanie
modyfikacja
zaprawa CuP10
właściwości mechaniczne
właściwości plastyczne
Opis:
The paper presents the results of studies on the effect of the AlSi17Cu5 alloy overheating to a temperature of 920°C and modification with phosphorus (CuP10) on the resulting mechanical (HB, Rm, R0.2) and plastic (A5 and Z) properties. It has been shown that, so-called, "time-thermal treatment" (TTT) of an alloy in the liquid state, consisting in overheating the metal to about 250°C above Tliq., holding at this temperature by 30 minutes improves the mechanical properties. It has also been found that overheating of alloy above Tliq. enhances the process of modification, resulting in the formation of fine-grain structure. The primary silicon crystals uniformly distributed in the eutectic and characteristics of the \alfa(Al) solution supersaturated with alloying elements present in the starting alloy composition (Cu, Fe) provide not only an increase of strength at ambient temperature but also at elevated temperature (250°C).
Źródło:
Archives of Foundry Engineering; 2013, 13, 3; 68-71
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of Quality of EN AC-43300 Alloy with Use of ATND Method
Autorzy:
Pezda, J.
Powiązania:
https://bibliotekanauki.pl/articles/381845.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum alloy
ATND method
mechanical properties
stop aluminium
metoda ATND
właściwości mechaniczne
Opis:
Application of the silumins expands together with nowadays tendency to reduction of design structures mass. Technological and mechanical properties of Al-Si casting alloys depend mainly from structure of eutectic mixture, which is modified in result of introduction of micro alloying elements to liquid alloy, and that is why proper use of knowledge on crystallization to control of crystallization kinetics of produced alloys to optimize obtained structure is a significant factor leading to improvement of quality of the castings. In the paper one depicts use of the ATND method (thermal-voltage-derivative analysis) and regression analysis to assessment of quality of the EN AC-43300 alloy modified with strontium on stage of its preparation, in aspect of obtained mechanical properties (R0,02, R0,2, Rm, A5). Obtained dependencies enable prediction of mechanical properties of the investigated alloy, basing on values of characteristic points from the ATND method.
Źródło:
Archives of Foundry Engineering; 2013, 13, 1 spec.; 139-142
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure and physical properties of nanocrystalline Fe75B10Si10Cr5 alloy
Autorzy:
Baran, Dominika
Czyzewska, Natalia
Dziuba, Szymon
Przenajkowska, Julia
Piesiak, Mateusz
Hasiak, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/1189908.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
metoda zasysania
stop nanokrystaliczny
właściwości mechaniczne
suction casting
nanocrystalline alloy
mechanical properties
Opis:
The main of this paper is to study the microstructure and physical properties of the Fe75B10Si10Cr5 in condition after being produced. The sample was prepared as cylindrical rod with a diameter of 3 mm. The rod was produced using the arc melting method with a suction casting option. It was found that produced alloy was nanocrystalline with average grains of about 15 nm. Due to the different cooling rates in the inner and outer part of the rod, variable sizes of dendrites in the material were observed. The presence of the dendrites was also confirmed on the surface by AFM investigations. The average roughness calculated for chosen profile of the examined area was 6 nm and average hardness of the material equals 844 HV. The mechanical properties were determined in respect to the Oliver-Pharr method. Young’s modulus of the Fe75B10Si10Cr5 calculated from load-displacement curve equals 128 GPa. Magnetic properties of the sample were measured by the vibrating sample magnetometer. The coercivity was equaled 2.184 kA/m, which is relatively low. It means that the Fe75B10Si10Cr5 alloy is magnetically soft.
Źródło:
Interdisciplinary Journal of Engineering Sciences; 2019, 7, 1; 17--22
2300-5874
Pojawia się w:
Interdisciplinary Journal of Engineering Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure and Texture Evolution During Cold-Rolling in the Fe-23Mn-3Si-3Al Alloy
Rozwój mikrostruktury i tekstury w walcowanym na zimno stopie Fe-23Mn-3Si-3Al
Autorzy:
Kowalska, J.
Ratuszek, W.
Witkowska, M.
Zielińska-Lipiec, A.
Kowalski, M.
Powiązania:
https://bibliotekanauki.pl/articles/356606.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
microstructure
texture
alloy
TRIP effect
TWIP effect
mikrostruktura
tekstura
stop
TRIP
TWIP
Opis:
Fe–23wt.%Mn–3wt.%Si–3wt.%Al alloy was cast, homogenized at 1150ºC, hot-rolled at temperatures between 1200ºC and 900ºC and next cold-rolled from 5% up to 40% reductions in thickness. Microstructure and texture of this alloy, which has a low stacking fault energy, were defined after cold-rolling. Investigation of transmission electron microscopy and X-ray diffraction showed that mechanical twinning and martensitic transformations (γfcc→εhcp and γfcc→εhcp→α′bcc) took place during cold-rolling. The crystallographic Shoji-Nishiyama (S-N) {00.2}ε║{111}γ, <11.0>ε ║ <110>γ and Kurdjumov-Sachs (K-S) {111}γ║{101}α’, <101>γ║<111>α’ relations between martensite (ε, α’) and austenite (γ), were found in the coldrolled material.
W artykule zamieszczono wyniki badań mikrostruktury i tekstury otrzymane dla stopu Fe–23%Mn–3%Si–3%Al (% masowe). Po odlaniu wlewek homogenizowano przy temperaturze 1150ºC, walcowano na gorąco w zakresie temperatur 1200ºC-900ºC i następnie walcowano na zimno do odkształceń od 5% do 40%. Wyniki badań uzyskane przy użyciu transmisyjnej mikroskopii elektronowej i metod dyfrakcyjnych wskazują, że podczas odkształcenia plastycznego na zimno w stopie zachodzi mechaniczne bliźniakowanie i przemiana martenzytyczna. Występują zależności krystalograficzne pomiędzy austenitem (faza γ) i martenzytem (faza ε i faza α’), które opisują zależności: Shoji-Nishiyama {00.2}ε || {111}γ, <11.0>ε || <110>γ i Kurdjumowa-Sachsa {111}γ || {110}α, <110>γ || <111>α.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 3A; 1789-1794
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure and physical properties of Fe59Mn27Ni7Cr3Si4 shape memory alloy
Autorzy:
Lipiński, Piotr
Kowalik, Dawid
Kowalski, Tomasz
Królicki, Michał
Hasiak, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/1189884.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
stopy z pamięcią kształtu
mikrostruktura
twardość
AFM
XRD
shape memory alloy
microstructure
hardness
Opis:
In this work the authors present the properties of the Fe59Mn27Ni7Cr3Si4 (at. %) shape memory alloy. Two different phases were discovered during the XRD analysis and Fe-Mn phase was identified. The hardness of the investigated material in the as-cast state was 194 HV. The nano hardness was 511 HV and Young modulus was determined as 159 GPa. AFM and LFM tests allowed to observe linear arrangement of one phase formed as multiple irregular separations. Shape memory effect was not observed in the temperature range 22 – 600oC.
Źródło:
Interdisciplinary Journal of Engineering Sciences; 2019, 7, 1; 10--16
2300-5874
Pojawia się w:
Interdisciplinary Journal of Engineering Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructural Characterisation of Friction Stir Processed Cast AlSi9Mg Aluminium Alloy
Autorzy:
Węglowski, M. S.
Powiązania:
https://bibliotekanauki.pl/articles/379980.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast aluminium alloy
friction stir processing
FSP
microstructure
stop aluminium
obróbka tarciowa
mikrostruktura
Opis:
Aluminium alloy castings become more popular when a refined microstructure and a uniform distribution of Si particles are easily produced. One of the technologies that can fulfil these requirements is Friction Stir Processing (FSP). Therefore, the formation of various microstructural regions during FSP of AlSi9Mg alloy has been studied. It is presented that each of the regions are characterized by unique microstructures. Prior to FSP, the microstructure of a representative as-cast aluminium alloy was composed of Al dendrites and a nonuniform distribution of Si and Fe. FSP microstructurally modified and significantly refined the as-cast material, effectively eliminating the microstructural segregation and porosity of the base material. The characteristic microstructures are reflected in the hardness distribution. The hardness of the modified area was different from the base material.
Źródło:
Archives of Foundry Engineering; 2014, 14, 3 spec.; 75-78
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of metallurgic purity of the 15CrMoV6-10-3 (15HGMV) steel on technological and mechanical properties of cold-deformed products
Wpływ czystości metalurgicznej stali 15CrMoV6-10-3 (15HGMV) na właściwości technologiczne i mechaniczne wyrobów odkształcanych na zimno
Autorzy:
Burdek, M.
Marcisz, J.
Stępień, J.
Powiązania:
https://bibliotekanauki.pl/articles/182008.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Metalurgii Żelaza im. Stanisława Staszica
Tematy:
mikrostruktura
low-alloy steel
compression
microstructure
electroslag remelting
stal niskostopowa
ściskanie
przetapianie elektrożużlowe
Opis:
The subject of the article is the analysis of the impact of electro-slag remelting - ESR on the technological and mechanical properties of the 15HGMV steel. Uniaxial compression tests were carried out with the use of a Gleeble simulator. The hardness and microstructure of deformed samples were tested. The mechanical properties were measured in a static tensile test. Significantly larger non-metallic inclusions were found in the material without ESR, as compared to the material with ESR, which may be decisive in further processing of the material in the form of thin-walled tubes with the use of cold flow forming.
Przedmiotem artykułu jest analiza wpływu obróbki elektrożużlowej - EŻP na właściwości technologiczne i mechaniczne stali 15HGMV. W pracy wykonano próby ściskania jednoosiowego w symulatorze Gleeble. Badano twardość i mikrostrukturę próbek odkształconych. Wykonano pomiary właściwości mechanicznych w statycznej próbie rozciągania. W materiale bez EŻP w porównaniu do materiału z EŻP stwierdzono występowanie znacznie większych wtrąceń niemetalicznych, co może mieć decydujące znaczenie w dalszym przetwarzaniu materiału w postaci rur cienkościennych metodą zgniatania obrotowego na zimno.
Źródło:
Prace Instytutu Metalurgii Żelaza; 2018, T. 70, nr 2, 2; 30-36
0137-9941
Pojawia się w:
Prace Instytutu Metalurgii Żelaza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of Microstructure of Oriented Eutectic Fe-C Alloy
Autorzy:
Trepczyńska-Łent, M.
Powiązania:
https://bibliotekanauki.pl/articles/381607.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
directional solidification
eutectic alloy
microstructure
longitudinal section
transverse section
krzepnięcie
stop eutektyczny
mikrostruktura
Opis:
Fe - 4,25% C alloy was directionally solidified with a constant temperature gradient of G = 33,5 K/mm and growth rate of v = 83,3 μm/s (300 mm/h) using a vacuum Bridgman-type crystal growing facility with liquid metal cooling technique. To reveal more detailed microstructure, the deep etching was made. This was obtained in the process of electrolytic dissolution. The microstructure of the sample was examined on the longitudinal and transverse sections using an Optical Microscope and Scanning Electron Microscope. Using the Electron Backscattered Diffraction technique, phase map and analysis of phase were made. In this paper the analysis of Fe-C alloy eutectic microstructure is presented. Regular eutectic structure was obtained. The fracture surfaces show lamellar structure. Microscopic observation after electrolytic extraction indicates that the grains of longitudinal shape of eutectic cementite have been obtained. These grains are characterized by layered construction with many rounded discontinuities.
Źródło:
Archives of Foundry Engineering; 2018, 18, 1; 123-128
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie metody ATND do oceny właściwości mechanicznych okołoeutektycznego stopu AlSi12Cu2(Fe)
Application of the ATND method to assessment of mechanical properties of near eutectic AlSi12Cu2(Fe) alloy
Autorzy:
Pezda, J.
Powiązania:
https://bibliotekanauki.pl/articles/269764.pdf
Data publikacji:
2017
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
aluminum alloy
mechanical properties
ATND
modification
crystallization
stop aluminium
właściwości mechaniczne
modyfikacja
krystalizacja
Opis:
Struktura i właściwości mechaniczne siluminów są w dużym stopniu zależne od szybkości chłodzenia, składu oraz operacji modyfikacji i obróbki cieplnej. W artykule opisano badania doświadczalne dotyczące zastosowania metody ATND (analiza termiczno-napięciowo- różnicowa) oraz analizy regresji do oceny jakości stopu AlSi12Cu2(Fe) modyfikowanego strontem na etapie jego przygotowania. Uzyskane zależności pomiędzy wartościami temperatury i napięcia w punktach charakterystycznych krzywych metody ATND umożliwiają predykcję właściwości mechanicznych (Rsp0,02, Rm, A5) badanego stopu. Pozwala to już na etapie przygotowania stopu ocenić jego właściwości mechaniczne bez konieczności prowadzenia pracochłonnych badań i wprowadzić ewentualne działania korygujące, mające na celu poprawę jego właściwości.
Structure and mechanical properties of silumins are highly dependent on cooling rate, composition and operations of modification and heat treatment. The present article describes experimental research concerning use of the ATND method (thermal-voltage-derivative analysis) and regression analysis to assessment of quality of AlSi12Cu2(Fe) alloy modified with strontium at the stage of its preparation. Obtained relationships between values of temperature and voltage in characteristic points on curves from ATND method enable prediction of mechanical properties (R0,02, Rm, A5) of the investigated alloy. This allows, as early as in preparation stage of the alloy, to evaluate its mechanical properties without need of labour consuming tests, and to introduce possible corrective measures aimed at improvement of its properties.
Źródło:
Inżynieria Maszyn; 2017, R. 22, z. 1; 47-57
1426-708X
Pojawia się w:
Inżynieria Maszyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure, castability, microstructural stability and mechanical properties of ZRE1 magnesium alloy
Mikrostruktura, lejność, stabilność mikrostruktury i właściwości mechaniczne stopu magnezu ZRE1
Autorzy:
Rzychoń, T.
Szala, J.
Kiełbus, A.
Powiązania:
https://bibliotekanauki.pl/articles/354630.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
stopy magnezu
ZRE1
płynność
mikrostruktura
magnesium alloys
ZRE1 alloy
fluidity
microstructure
Opis:
The influence of pouring temperature on the microstructure, fluidity and mechanical properties of ZRE1 magnesium alloy was investigated in this paper. The pouring temperature influences on the fluidity, mean area of grain plane section and mechanical properties. The dependence between pouring temperature and volume fraction of the (Mg, Zn)12RE intermetallic phase was not observed. The investigations enabled to determine the optimal pouring temperature of ZRE1 alloy. Moreover, the microstructural stability of ZRE1 alloy during long-term annealing at 150°C, 200°C and 400°C was investigated. ZRE1 magnesium alloy possesses a high microstructural stability up to 200°C, whereas at 400°C magnesium oxides and rare earth metals oxides are observed in the microstructure.
W pracy przedstawiono wyniki badań wpływu temperatury odlewania na mikrostrukturę, lejność i właściwości mechaniczne stopu magnezu ZRE1. Stwierdzono, że temperatura odlewania wpływa na lejność, średnie pole powierzchni płaskiego przekroju ziarna i właściwości mechaniczne stopu ZRE1. Nie zaobserwowano zależności pomiędzy temperaturą odlewania a udziałem objętościowym wydzieleń fazy miedzymetalicznej (Mg, Zn)12RE. Przeprowadzone badania umożliwiły określenie najkorzystniejszej temperatury odlewania do form piaskowych dla stopu ZRE1. Przeprowadzono także badania stabilności strukturalnej podczas długotrwałego wygrzewania w temperaturze 150°C, 200°C i 400°C. Stwierdzono, że do temperatury 200°C mikrostruktura jest stabilna, natomiast w temperaturze 400°C stop ZRE1 charakteryzuje się niską stabilnością i skłonnością do tworzenia tlenków magnezu i metali ziem rzadkich.
Źródło:
Archives of Metallurgy and Materials; 2012, 57, 1; 245-252
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza właściwości mechanicznych blachy wykonanej ze stopu tytanu Ti6Al4V w warunkach quasi-statycznych i dynamicznych obciążeń rozciągających
Mechanical properties analysis of the plate made of Ti6Al4V in the quasi-static and dynamic tensile loading
Autorzy:
Kostrzewski, C.
Moćko, W.
Powiązania:
https://bibliotekanauki.pl/articles/107333.pdf
Data publikacji:
2015
Wydawca:
Instytut Transportu Samochodowego
Tematy:
blacha
stop tytanu
proces rozciągania
właściwości mechaniczne
plate
titanium alloy
tensile process
mechanical properties
Opis:
W artykule przedstawiono metodykę badania próbek wykonanych ze stopu tytanu Ti6Al4V w warunkach quasi-statycznych oraz dynamicznych, przeprowadzonego odpowiednio z wykorzystaniem maszyny wytrzymałościowej oraz metody zmodyfikowanego pręta Hopkinsona. Przebieg procesu rozciągania zastał przeanalizowany metodą cyfrowej korelacji obrazu, w wyniku czego otrzymano rozkład wartości odkształcenia na powierzchni badanych próbek. Na podstawie danych zarejestrowanych przez maszynę wytrzymałościową oraz uzyskanych z użyciem teorii propagacji fal sprężystych w prętach wyznaczono krzywe rozciągania dla poszczególnych prób. W oparciu o uzyskane charakterystyki materiałowe stworzono model, który umożliwił symulację procesu rozciągania z wykorzystaniem metody elementów skończonych w środowisku ABAQUS/Standard.
This paper presents the testing methodology of specimens made of titanium alloy Ti6Al4V in the quasi-static and dynamic conditions. Tests was carried out using the testing machine and the split Hopkinson tensile bar method. The tensile process was analyzed by digital image correlation to give a strain distribution on the specimen surface. Based on data recorded from testing machine and data obtained using the theory of the elastic wave propagation in bars the tensile curves was created for each test. Furthermore the tensile test simulation was carried out using the gained material characteristics in the ABAQUS/Standard environment.
Źródło:
Transport Samochodowy; 2015, 3; 61-80
1731-2795
Pojawia się w:
Transport Samochodowy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modifications ALSI7MG0.3 alloys trough CA, SR and SB
Autorzy:
Cais, Jaromír
Lysoňková, Irena
Kraus, Pavel
Powiązania:
https://bibliotekanauki.pl/articles/102369.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
Al-Si alloy
modifier
microstructure
EDX analysis
stop Al-Si
modyfikator
mikrostruktura
analiza EDX
Opis:
This article deals with examing the effect of modifier on changes in microstructure of the alloy AlSi7Mg0.3. The content of the experiment was to examine the effect of addition of calcium, stroncium, and antimony to change the morphology of the eutectic silicon in the alloy type of Al-Si (namely AlSi7Mg0.3). Besides changes in the morphology of eutectic silicon was explored focused on character exlusion modifiers within microstructure of the modified alloy. Examination of the microstructure was realized by scanning electron microscopy and complemented by EDX analysis of the examined samples.
Źródło:
Advances in Science and Technology. Research Journal; 2018, 12, 2; 180-187
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zmiany w mikrostrukturze stopu PA9 pod wpływem ciśnienia prasowania
Changes in the microstructure of PA9 alloy under the effect of squeeze pressure
Autorzy:
Reguła, T.
Dudek, P.
Powiązania:
https://bibliotekanauki.pl/articles/391698.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Odlewnictwa
Tematy:
stop aluminium
PA9
squeeze casting
ciśnienie prasowania
mikrostruktura
aluminium alloy
squeeze pressure
microstructure
Opis:
W pracy przedstawiono wyniki badań wpływu ciśnienia zewnętrznego - wywieranego na metal w procesie prasowania w stanie ciekłym (squeeze casting), na strukturę stopu PA9. Próbki do badań uzyskano na drodze odlewania badanego stopu PA9 do formy metalowej pod zróżnicowanym ciśnieniem, odpowiednio 0,1 (atmosferyczne), 75 i 150 MPa, wykorzystując maszynę squeeze casting firmy UBE VSC 500. Zaobserwowano znaczący wpływ ciśnienia na średni rozmiar ziarna oraz inne charakterystyki mikrostrukturalne, co świadczy o celowości stosowania metod ciekło-fazowych z wykorzystaniem ciśnienia zewnętrznego w aspekcie podniesienia jakości wytwarzanych odlewów.
This paper presents the results of research on an impact of external pressure applied in the squeeze casting process on the structure of PA9 alloy. Samples for the research were obtained by casting the tested PA9 alloy into a die under a varying pressure of 0.1 (atmospheric), 75 and 150 MPa, using an UBE VSC 500 squeeze casting machine. A significant effect of pressure on the average grain size and other microstructural characteristics was stated, proving the usefulness of liquid-phase methods using external pressure in the improvement of casting quality.
Źródło:
Prace Instytutu Odlewnictwa; 2012, 52, 4; 105-112
1899-2439
Pojawia się w:
Prace Instytutu Odlewnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Cyclic Sintering on the Structure and Mechanical Properties of Tungsten Heavy Alloy
Autorzy:
Skoczylas, P.
Kaczorowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/379571.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tungsten heavy alloy
multiple sintering
mechanical properties
stop ciężki wolframu
spiekanie wielokrotne
właściwości mechaniczne
Opis:
The results of structure and mechanical properties investigations of tungsten heavy alloy (THA) after cyclic sintering are presented. The material for study was prepared using liquid phase sintering of mixed and compacted powders in hydrogen atmosphere. The specimens in shape of rods were subjected to different number of sintering cycles according to the heating schemes given in the main part of the paper From the specimens the samples for mechanical testing and structure investigations were prepared. It follows from the results of the mechanical studies, that increasing of sintering cycles lead to decrease of tensile strength and elongation of THA with either small or no influence on yield strength. In opposite to that, the microstructure observations showed that the size of tungsten grain increases with number of sintering cycles. Moreover, scanning electron microscope (SEM) observations revealed distinctly more trans-granular cleavage mode of fracture in specimens subjected to large number of sintering cycles compared with that after one or two cycles only.
Źródło:
Archives of Foundry Engineering; 2016, 16, 4; 131-136
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure and properties investigation of MCMgAl12Zn1 magnesium alloy
Autorzy:
Dobrzański, L. A.
Król, M.
Powiązania:
https://bibliotekanauki.pl/articles/380517.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermal analysis
microstructure
mechanical properties
magnesium alloy
analiza termiczna
mikrostruktura
właściwości mechaniczne
stop magnezu
Opis:
This work presents an influence of cooling rate on crystallization process, structure and mechanical properties of MCMgAl12Zn1 cast magnesium alloy. The experiments were performed using the novel Universal Metallurgical Simulator and Analyzer Platform. The apparatus enabled recording the temperature during refrigerate magnesium alloy with three different cooling rates, i.e. 0.6, 1.2 and 2.4ºC/s and calculate a first derivative. Based on first derivative results, nucleation temperature, beginning of nucleation of eutectic and solidus temperature were described. It was fund that the formation temperatures of various thermal parameters, mechanical properties (hardness and ultimate compressive strength) and grain size are shifting with an increasing cooling rate.
Źródło:
Archives of Foundry Engineering; 2013, 13, 1; 9-14
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modyfikacja staliwa niskostopowego Cr-Mn-Si-Ni-Mo borem, tytanem i MZR
Grain Refinement of Low Alloy Cr-Mn-Si-Ni-Mo Cast Steel with Boron, Titanium and Rare Elements Additions
Autorzy:
Sobula, S.
Tęcza, G.
Krasa, O.
Wajda, W.
Powiązania:
https://bibliotekanauki.pl/articles/381555.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
modyfikacja staliwa
staliwo niskostopowe
właściwości mechaniczne
grain refinement
low-alloy cast steel
mechanical properties
Opis:
Staliwo niskostopowe jest materiałem o bardzo dobrych właściwościach mechanicznych, chętnie stosowanym na elementy maszyn pracujących w warunkach dużych obciążeń, a także w warunkach zużycia ściernego. Świetne właściwości wytrzymałościowe otrzymywane podczas produkcji odlewów z tego staliwa (Rm>1300 MPa), są uzyskiwane kosztem obniżenia plastyczności, która nie przekracza 10%. Dlatego celem badań była taka modyfikacja mikrostruktury, która pozwoliłaby otrzymać rozdrobnienie ziarna w stanie lanym, gwarantujące dobrą plastyczność po obróbce cieplnej odlewów. W artykule omówiono wyniki modyfikacji mikrostruktury staliwa L20HGSNM o zawartości 0,19÷0,23 %C; 0,75÷0,86 %Si; 0,93÷1,02 %Mn; 0,60÷0,65 %Cr; 1,02÷1,10 %Ni i 0,13÷0,16 %Mo. Modyfikację przeprowadzono przy pomocy żelazoboru, żelazotytanu i miszmetalu. Modyfikatory wprowadzano podczas spustu stali do kadzi. Stal odlewano do form piaskowych. Próbki do badań wycinano z wlewków typu Y przylanych do odlewów. Badano wpływ modyfikatorów na strukturę w stanie lanym, a także właściwości mechaniczne po ulepszaniu cieplnym. Uzyskano wydłużenie staliwa powyżej 12% przy wytrzymałości na rozciąganie przekraczającej 1000 MPa.
The low alloy cast steels have the good mechanical properties, and it finds wide area of applications in the manufacture of this parts, which work with high dynamic loads and in wear conditions. High strength obtained during manufacturing process results in a decrease of the elongation which hardly ever is over 10%. The aim of investigation was grain refinements which leads to small grain size in as-cast condition, resulting in a fine martensite, and an increase of the ductility. In this paper effects of grain refinement is observed in L20HGNM cast steel containing: 0,19÷0,23 %C; 0,75÷0,86 %Si; 0,93÷1,02 %Mn; 0,60÷0,65 %Cr; 1,02÷1,10 %Ni i 0,13÷0,16 %Mo. The grain refinement was treated by ferroboronium, ferrotitanium, and rare earth elements (REM). The refinement elements were introduced to the ladle during tapping. The steel was casted to the sand molds. Specimens were machined from keel-block coupons. The influence of modifying elements on the as-cast microstructure and mechanical properties after heat treatment were examined. It was obtained elongation over 12% and ultimate tensile strength over 1000 MPa.
Źródło:
Archives of Foundry Engineering; 2013, 13, 3 spec.; 153-156
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure and mechanical properties of silicon-free Al-Cu-Ni casting alloys used in heavy duty aircraft engine parts
Mikrostruktura i właściwości mechaniczne odlewniczych bezkrzemowych stopów Al-Cu-Ni stosowanych na silnie obciążone elementy silników lotniczych
Autorzy:
Mrówka-Nowotnik, G.
Sieniawski, J.
Wierzbińska, M.
Nowotnik, A.
Powiązania:
https://bibliotekanauki.pl/articles/176064.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminium alloy
microstructure
heat treatment
mechanical properties
stop aluminium
mikrostruktura
obróbka cieplna
właściwości mechaniczne
Opis:
The main task of this work was to study the microstructure and mechanical properties of silicon-free Al-Cu-Ni casting alloys. The microstructure of tested samples was evaluated in terms of fracture mechanism using an optical microscope - Nikon 300, scanning electron microscope HITACHI S-3400 (SEM) in a conventional back-scattered electron mode and JEOL - JEM 2100 ARP TEM/STEM electron microscope. The mechanical (Rm and R0.2) and plastic (A,Z) properties of the examined alloy were evaluated by uniaxial tensile test at room temperature. The results shows that the casting method and the applied thermal processing did not have a significant influence on the primary (Al6Fe, Al2CuMg, Al7Cu4Ni, Al3(CuFeNi)2 and AlCuMn) intermetallic phase composition and microstructure phase component morphology. However, during prolonged heating growth and change in the shape of separations of the θ'-Al2Cu reinforcing phase occurs proportionally to temperature and heating time. Sand casts show higher mechanical properties: Rm R0.2. The stability of the mechanical properties of the investigated alloys in higher temperatures is the consequence of the increased Cu content.
Celem pracy była analiza mikrostruktury i właściwości mechanicznych odlewniczych, bezkrzemowych stopów Al-Cu-Ni. Obserwacje mikrostruktury prowadzono przy użyciu mikroskopu świetlnego -Nikon 300, elektronowego mikroskopu skaningowego HITACHI S-3400 z systemem EDS do mikroanalizy rentgenowskiej i elektronowego mikroskopu transmisyjnego JEOL - JEM 2100 ARP z systemem STEM/EDS. Właściwości wytrzymałościowe (Rm, R02) i plastyczne (A,Z) badanych stopów wyznaczono w próbie statycznej rozciągania w temperaturze pokojowej. Analiza uzyskanych wyników badań pozwoliła stwierdzić, że sposób odlewania oraz obróbka cieplna nie mają istotnego wpływu na skład fazowy oraz morfologię pierwotnych cząstek faz międzymetalicznych (Al6Fe, Al2CuMg, Al7Cu4Ni, Al3(CuFeNi)2 i AlCuMn. Długotrwałe wygrzewanie, w podwyższonej temperaturze powoduje jednak znaczny wzrost cząstek umacniającej fazy θ'-Al2Cu. Ustalono, że lepsze właściwości mechaniczne: Rm i R02 wykazują stopy odlane do form piaskowych. Stabilność właściwości mechanicznych badanych stopów w podwyższonej temperaturze jest spowodowana większą zawartością Cu.
Źródło:
Advances in Manufacturing Science and Technology; 2014, 38, 3; 77-93
0137-4478
Pojawia się w:
Advances in Manufacturing Science and Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ procesu KOBO na właściwości stopu CuCr1Zr
Influence of KOBO process on the properties of CuCr1Zr alloy
Autorzy:
Rozwalka, J.
Płaczek, G.
Andrzejewski, D.
Powiązania:
https://bibliotekanauki.pl/articles/211910.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Obróbki Plastycznej
Tematy:
stop CuCrZr
wyciskanie KOBO
właściwości mechaniczne
alloy CuCr1Zr
KOBO extrusion
mechanical properties
Opis:
Autorzy pracy podjęli badania nad stopem CuCr1Zr w celu polepszenia jego właściwości mechanicznych oraz określenia ich stabilności w podwyższonej temperaturze. W badaniach wykorzystano niekonwencjonalną metodę obróbki plastycznej – wyciskanie metodą KOBO. Idea metody KOBO oparta jest na zewnętrznym wymuszeniu zlokalizowanego plastycznego płynięcia w pasmach ścinania poprzez nałożenie na jednokierunkowe, robocze oddziaływanie siłowe narzędzi kształtujących, dodatkowego, cyklicznie zmiennego oddziaływania w kierunku odmiennym od kierunku ruchu roboczego danego procesu. Wyciskaniu podano pręt w stanie T6 (bez powodzenia), a następnie pręt po przesycaniu z temperatury 900 i 1030°C (próba zakończona sukcesem). Wyciskanie metodą KOBO przeprowadzono dla prętów po przesycaniu, z dwoma wariantami chłodzenia (do powietrza i do wody). Podczas procesu wyciskania KOBO nastąpiła redukcja przekroju prętów z φ40 mm do φ ok. 12 mm, co dało stopień przerobu ok. 11,1, przy odkształceniu rzeczywistym ok. 2,4. Pręty, wyjściowy i wyciśnięte metodą KOBO, poddano badaniom twardości, statycznej próbie ściskania w temperaturze otoczenia oraz statycznej próbie rozciągania w temperaturze otoczenia i temperaturze podwyż- szonej do 450°C. Na podstawie uzyskanych wyników badań można stwierdzić, że zastosowanie metody odkształceń plastycznych (wyciskanie KOBO) pozwala umocnić materiał do tego stopnia, że wartości jego właściwości wytrzymałościowych przewyższają wartości uzyskane po obróbce cieplnej (stan T6). Natomiast w temperaturze 450°C dochodzi do spadku właściwości wytrzymałościowych o wartość od 25 do 40%.
The authors of this article conducted tests on CuCr1Zr alloy for the purpose of improving its mechanical properties and determining their stability at elevated temperatures. An unconventional plastic working method was utilized – KOBO extrusion. The idea of the KOBO method is based on external forcing of localized plastic flow in shear bands through the superposition onto the unidirectional operational force action of forming tools of an additional, cyclically variable action in a direction different from the direction of the given process’s operating direction. A rod in T6 state was extruded (unsuccessfully), followed by a extrusion of rod after hyperquenching from temperatures of 900 and 1030°C (test successful). KOBO extrusion was performed for hyperquenched rods with two cooling variants (in air and in water). During the KOBO extrusion process, the cross-section of rods was reduced from φ40 mm to approx. φ 12 mm, which yielded a reduction ratio of approx. 11.1 for an actual deformation of approx. 2.4. Rods, in original state and after KOBO extrusion, were subjected to hardness tests, static compression testing at room temperature and elevated temperature up to 450°C. Based on the obtained test results, it can be stated that the application of the method of plastic deformation (KOBO extrusion) makes it possible to harden the extent that the values of its strength properties exceed the values obtained after heat treatment (T6 state). However, at 450°C, strength properties decrease by 25 to 40%.
Źródło:
Obróbka Plastyczna Metali; 2017, 28, 2; 107-122
0867-2628
Pojawia się w:
Obróbka Plastyczna Metali
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Artificial Ageing on the Mechanical Properties of the EN AW 2017 Alloy
Autorzy:
Jirounkova, Klara
Vozka, Jan
Cais, Jaromir
Powiązania:
https://bibliotekanauki.pl/articles/102052.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
aluminium alloy
heat treatment
aging
mechanical properties
stop aluminium
obróbka cieplna
starzenie
właściwości mechaniczne
Opis:
This paper deals with different types of artificial ageing and its effect upon the mechanical properties of an aluminium alloy. For the purposes of this research, the EN AW 2017 alloy was subjected to different types of heat treatment. These samples were subjected to different analyses. The results of hardness measurements (HB and HV) revealed the highest values of the non‑heat treated sample. The static tensile stress test proved the highest ductility of the heat treated samples. Overall, the best were revealed for the sample artificially aged at 160°C.
Źródło:
Advances in Science and Technology. Research Journal; 2020, 14, 1; 75-80
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of squeeze parameters and modification of AlSi7Mg alloy
Autorzy:
Zyska, A.
Konopka, Z.
Łągiewka, M.
Nadolski, M.
Powiązania:
https://bibliotekanauki.pl/articles/381007.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mechanical properties
Al alloy
squeeze casting technology
modification
właściwości mechaniczne
stop Al
technologia prasowania
modyfikacja
Opis:
The paper present the examination results concerning mechanical properties of castings made of AlSi7MG alloy in correlation both with the most significant squeeze casting parameters and with the modification treatment. Experiments were planned and held according to the 23 factorial design. The regression equations describing the influence of the squeeze pressure, the mould temperature, and the quantity of strontium modifier on the strength and elongation of the examined alloy were obtained. It was found that the main factor controlling the strength increase is the squeeze pressure, while the plasticity (A5) of the alloy is affected most advantageously by modification. The application of modification treatment in squeeze casting technology enables for production of the slab-type castings made of AlSi7Mg alloy exhibiting strength at the level of 230 MPa and elongation exceeding 14%.
Źródło:
Archives of Foundry Engineering; 2013, 13, 2; 113-116
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stress rupture test of MAR-M509 alloy with structure refined by rapid resolidification
Autorzy:
Mróz, M.
Orłowicz, W.
Tupaj, M.
Trytek, A.
Powiązania:
https://bibliotekanauki.pl/articles/380450.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
stop MAR M509
mikrostruktura
MAR-M509 alloy
rapid resolidification
microstructure
stress rupture test
Opis:
This study presents results of stress rupture test of MAR-M-509 cobalt alloy samples, as-cast and after surface refining with a concentrated stream of heat. Tests were conducted on samples of MAR-M-509 alloy castings, obtained using the lost-wax method. Casting structure refining was performed with the GTAW method in argon atmosphere, using the current I = 200 A and electrical arc scanning velocity vs = 100, 150, 200 and 250 mm/min. The effect of rapid resolidification of the MAR-M-509 alloy on the microstructure was examined and significant improvement in stress rupture test was observed.
Źródło:
Archives of Foundry Engineering; 2012, 12, 4; 117-120
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High Temperature Mechanical Properties of AZ91 Magnesium Alloy Weld Joint
Autorzy:
Stopyra, M.
Adamiec, J.
Powiązania:
https://bibliotekanauki.pl/articles/382357.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mechanical properties
AZ91 magnesium alloy
welding method
właściwości mechaniczne
stop magnezu AZ91
metoda spawania
Opis:
Magnesium alloys are widely applied in aircraft and automotive industry, due to their low density and high specific strength. Welding methods can be used to join Mg alloy elements and to repair or regenerate defective or worn-out castings. Therefore the influence of weld joint’s microstructure on mechanical properties needs to be studied. In present paper high temperature mechanical properties of AZ91 Mg alloy weld joint was investigated. Tensile tests were conducted in temperature range between 20 and 200°C. Ultimate tensile strength decreased as the temperature increased from 50°C. At temperature up to 150°C rapture occurred in the base metal, at 200°C rupture location switched to the weld fusion zone. Based on metallographic and fractographic observation, the fracture mechanism was described. Macro crack formed from the merger of micro cracks occurring at massive β phase precipitates.
Źródło:
Archives of Foundry Engineering; 2013, 13, 1 spec.; 181-184
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of structures in As-cast alloys from the Mg-Zn-Ca system
Badanie struktury odlewanych stopów magnezu z układu Mg-Zn-Ca
Autorzy:
Kubok, K.
Lityńska-Dobrzyńska, L.
Wojewoda-Budka, J.
Góral, A.
Dębski, A.
Powiązania:
https://bibliotekanauki.pl/articles/356353.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnesium alloy
Mg-Zn-Ca
Ca2Mg6Zn3
microstructure
TEM
stop magnezu
mikrostruktura
Opis:
Alloys of nominal composition Mg-3Zn-xCa (x = 0, 0.2, 0.5, 0.7, 1.0, 1.3) wt.% have been prepared by resistance melting and casting into graphite mould under argon atmosphere. All investigated alloys have revealed α(Mg) dendritic microstructures with intermetallic phases distributed in interdendritic spacing. The Mg4Zn7 has been identified as the main phase which coexists with α(Mg) in the Mg-Zn alloy. Calcium addition causes the formation of ternary Ca2Mg6Zn3 hexagonal phase, denoted also as Ca3MgxZn15-x . The increase of Mg/Zn ratio from 0.59 in Mg-3Zn-0.2Ca wt.% alloy to 2.72 in Mg-3Zn-1.3Ca wt.% alloy in this phase is connected with an increase in the lattice parameters. The microhardness of the Ca containing alloys increases up to 67 HV (for the alloy containing 1.3 wag.% Ca) compared to the 50 HV for Mg-3Zn wt.% alloy.
Stopy o składach Mg-3Zn-xCa (x = 0, 0.2, 0.5, 0.7, 1.0, 1.3) %wag. topiono w piecu oporowym w atmosferze argonu i odlano do tygla grafitowego. Wszystkie badane stopy posiadają po odlaniu mikrostrukturę dendrytyczną α -Mg, z obecnością faz międzymetalicznych w przestrzeniach międzydendrytycznych. Główna faza międzymetaliczna w stopie Mg-3Zn (referencyjnym) była faza Mg4Zn7. Dodatek Ca powoduje tworzenie się heksagonalnej fazy potrójnej Ca2Mg6Zn3, opisywanej również jako Ca3MgxZn15-x . Stosunek Mg/Zn w tej fazie zmienia się od wartości 0.59 dla stopu Mg-3Zn-0.2Ca do 2.72 dla stopu Mg-3Zn-1.3Ca, co związane jest ze zwiększaniem się parametrów komórki elementarnej. Obecność Ca w stopie powoduje wzrost mikrotwardości do 67 HV dla stopu zawierającego 1.3 wag.% Ca (w porównaniu do 50 HV dla stopu Mg-3Zn).
Źródło:
Archives of Metallurgy and Materials; 2013, 58, 2; 329-333
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructural Characterization of the As-cast AZ91 Magnesium Alloy with Rare Earth Elements
Autorzy:
Grzybowska, A.
Braszczyńska-Malik, K.
Powiązania:
https://bibliotekanauki.pl/articles/382210.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Mg-Al-Zn alloy
rare earth elements
microstructure
stop Mg-AI-Zn
pierwiastki ziem rzadkich
mikrostruktura
Opis:
Microstructural analysis of as-cast Mg-9Al-0.9Zn-xRE (x = 0, 1, 2, 3, 5 wt.%) magnesium alloys is presented. Light microscopy (LM) and scanning electron microscopy (SEM+EDX) were used to characterized the obtained material. The results revealed that the as-cast AZ91 alloy consists of α – Mg matrix, binary eutectic α + γ (where γ is Mg17Al12). While rare earth elements were introduced to the Mg-Al-Zn alloy new Al11RE3 phase was formed. Additionally, in the experimental alloys instead of Al-Mn phase, ternary Al-Mn-RE compound was observed. What is more, the influence of RE addition on the area fraction of eutectic and needle-like phase was analysed. With increasing addition of RE, the amount of γ phase decreased, but the amount of Al11RE3 phase increased.
Źródło:
Archives of Foundry Engineering; 2012, 12, 2s; 23-26
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical and Microstructural Characterization of Aluminium Alloy, EN AC-Al Si12CuNiMg
Autorzy:
Sirata, Gotfila G.
Wacławiak, K.
Dyzia, Maciej
Powiązania:
https://bibliotekanauki.pl/articles/2174619.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminium alloy
mechanical properties
metallography
microstructure
fracture properties
stop aluminium
właściwości mechaniczne
metalografia
mikrostruktura
właściwości pękania
Opis:
the manufacture of mechanical structures where low weight is critical. However, when these alloys are subjected to elevated temperatures, their mechanical properties deteriorate significantly. The aim of this study is to investigate the effect of temperature on the mechanical properties of aluminium alloy, EN AC-Al Si12CuNiMg. For this purpose, an experimental investigation was performed at ambient and elevated temperatures on aluminium alloy samples prepared by casting. Tensile and hardness tests were carried out to characterize the mechanical properties of this material. Additionally, an optical microscope was used to examine the microstructures of this alloy. Finally, a scanning electron microscope was used to analyze the fracture modes of this material. The results show that the mechanical properties such as tensile strength, yield strength, and Young's modulus of this alloy dramatically decrease when the temperature exceeds 250oC. The microstructural investigation reveals several factors that are detrimental to the mechanical properties of this alloy. This includes coarse-grained structures, micro-pores, and several intermetallic compounds. Furthermore, fractography reveals a minor cleavage-like pattern and micro-cracks on the fracture surface of all failed samples under various temperatures, indicating semi-brittle fracture mode.
Źródło:
Archives of Foundry Engineering; 2022, 22, 3; 34--40
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Warstwy ochronne na bazie metali wysokotopliwych wytwarzane techniką natryskiwania cieplnego
Protective coatings made of refractory metals by thermal spraying technique
Autorzy:
Wrona, A.
Lis, M.
Bilewska, K.
Czechowska, K.
Więcław, G.
Moskal, G.
Osadnik, M.
Kamińska, M.
Powiązania:
https://bibliotekanauki.pl/articles/211678.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Obróbki Plastycznej
Tematy:
stopy molibdenu
ren
natryskiwanie plazmowe
odporność korozyjna
mikrostruktura
molybdenum alloy
rhenium
plasma spraying
corrosion resistance
microstructure
Opis:
W pracy zaprezentowano nowe warstwy stopowe na bazie molibdenu o wysokiej zawartości renu, przeznaczone do zwiększania odporności korozyjnej elementów ceramicznych/cermetalicznych na działanie ciekłego szkła, w szczególności szkła sodowo-wapniowego. Przeznaczeniem są szczególnie narażone na korozję i erozję elementy instalacji do topienia szkła takie, jak gardziele przelotowe, bubblery, rozdzielniki ciekłego szkła oraz oczka. Cermetalicznym podłożem, na powierzchni którego wytworzono techniką natryskiwania plazmowego warstwy, jest spiekany ogniotrwały materiał na bazie niestabilizowanego ZrO2 z dodatkiem Mo. Wytworzone materiały poddane zostały procesowi krzemowania celem wytworzenia powłoki chroniącej warstwę przed utlenieniem w początkowej fazie zanim nastąpi całkowite stopienie szkła. Wytworzenie warstw wymagało opracowania metody umożliwiającej wytwarzanie proszku stopowego o morfologii pozwalającej na stosowanie go w procesach natryskiwania cieplnego. W celu otrzymania proszku wykazującego dużą sypkość opracowano metodę polegającą na wprowadzaniu renu do molibdenu w procesie redukcji nadrenianu amonu. Badano wpływ zastosowania operacji wygrzewania proszku po procesie redukcji na skład fazowy i mikrostrukturę proszków oraz otrzymanych z nich warstw. Operacja wygrzewania wpływa na jakościowy i ilościowy skład fazowy proszków, natomiast nie ma istotnego wpływu na skład fazowy warstw. Wytworzone materiały poddano próbom odporności korozyjnej, na podstawie których można stwierdzić, że opracowane warstwy bardzo dobrze chronią wyrób ceramiczny/cermetaliczny od korozyjnego działania szkła sodowo-wapniowego. Nie zaobserwowano składników szkła w cermetalu. Istotne jest również to, że rozpuszczalność składników warstwy w szkle jest minimalna.
The article presents novel molybdenum-based alloy coatings with a high rhenium content for improvement of corrosion resistance of ceramic/cermet elements towards molten glass, particularly soda-lime glass. The expected destination of the studied materials are elements especially exposed to corrosion such as passage throats, bubblers, separatory funnels for liquid glass. The substrate is a sintered refractory material made of unstabilized zirconia with Mo addition. Obtained materials were subjected to silicon in order to grow a cover layer to protect coating from oxidizing during the initial phase before glass is completely melted. For the purpose of deposition it was necessary to develop a method for preparation of alloy powder with a morphology applicable for thermal spraying. In order to obtain powder with high flowability a method of introduction of rhenium into molybdenum during ammonium perrhenate reduction was developed. The powders and coatings were investigated for phase composition and microstructure after annealing of reduced powder. The process of annealing was found to influence the phase composition of powders but not of the coatings. Tests of corrosion resistance carried out with the resulting materials indicate that the coatings protect well the underlaying ceramic/cermet core from the corrosive action of soda-lime glass. No glass element were found in the cermet material. It is also important that solubility of layer components in glass is minimal.
Źródło:
Obróbka Plastyczna Metali; 2015, 26, 2; 177-190
0867-2628
Pojawia się w:
Obróbka Plastyczna Metali
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efekt dodatku Ca na mikrostrukturę oraz właściwości mechaniczne stopu AZ91
The effect of Ca addition on the microstructure and mechanical properties of AZ91 alloy
Autorzy:
Reguła, T.
Dudek, P.
Fajkiel, A.
Powiązania:
https://bibliotekanauki.pl/articles/391716.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Odlewnictwa
Tematy:
stop magnezu
dodatek stopowy
wapń
właściwości mechaniczne
mikrostruktura
magnesium alloy
alloying addition
calcium
mechanical properties
microstructure
Opis:
W niniejszym artykule przedstawiono wyniki prac związanych z badaniem wpływu wapnia na mikrostrukturę oraz właściwości mechaniczne stopu AZ91. Próbki z odpowiednio przygotowanych wariantów stopu, zawierających zróżnicowane stężenie dodatku Ca (od 0,1 do 2,5% wag.) poddano statycznej próbie rozciągania w temperaturze otoczenia oraz podwyższonej (150°C). Przeprowadzono również badania mikrostruktury oraz analizę krzywych DSC. Ustalono, że w odniesieniu do bazowego stopu AZ91, wraz z rosnącym stężeniem wapnia, wzrasta wytrzymałość w temperaturze podwyższonej. Efekt ten jest spowodowany zastępowaniem niskotopliwej fazy Mg17Al12 przez fazy zawierające wapń - Al2Ca i (Mg, Al)2Ca oraz wzbogaceniem przestrzeni międzydendrytycznych w Ca. Jednocześnie dodatek wapnia niekorzystnie wpływa na właściwości mechaniczne w temperaturze otoczenia, co tłumaczyć można kruchością faz Mg-Al-Ca.
This paper presents the results of research work related with the effect of calcium on the microstructure and mechanical properties of AZ91 alloy. Samples of appropriately prepared alloy grades containing the addition of calcium in different concentrations (from 0.1 to 2.5 wt%) were examined in a static tensile test at room temperature and at elevated temperatures (150°C). Examinations of the microstructure were also carried out and DSC curves were plotted. It was found that, compared to the base AZ91 alloy, with increasing calcium concentration, the tensile strength at elevated temperatures increases, too. This effect is due to replacement of the low-melting Mg17Al12 phase with calcium-containing phases like Al2Ca and (Mg, Al)2Ca and to enrichment of the interdendritic spaces with Ca. At the same time, the addition of calcium adversely affects the mechanical properties at room temperature, which can be explained by brittleness of the Mg-Al-Ca phases.
Źródło:
Prace Instytutu Odlewnictwa; 2012, 52, 4; 17-24
1899-2439
Pojawia się w:
Prace Instytutu Odlewnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Non-Equilibrium Solidification on the Structure and Mechanical Properties of AZ91 Alloy
Autorzy:
Dziadoń, A.
Bucki, T.
Porzucek, P.
Powiązania:
https://bibliotekanauki.pl/articles/382457.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
AZ91 alloy
microstructure
mechanical properties
heat treatment
Stop AZ91
mikrostruktura
właściwości mechaniczne
obróbka cieplna
Opis:
AZ91 alloy was cast in a steel mould pre-exposed to three different temperatures: -196 ºC, 20 ºC and 650 ºC. The aim of the study was to determine the difference in the microstructure and mechanical properties between the castings formed in a cold mould and those solidifying under near-equilibrium conditions in a mould pre-heated to 650 ºC. Solidification at a low temperature led to dispersion of the structure elements as well as supersaturation of the solid solution of aluminium in magnesium. The heat treatment results indicate that the alloy solidified in the mould pre-exposed to 20 ºC can be successfully aged (heat treated to the T5 temper). It was found that the effect of the ageing process (T5 temper) was greater than the effect of the microstructure fragmentation, which was due to rapid solidification. The ageing results were assessed by comparing the microstructure and mechanical properties of AZ91 brought to the T5 condition with those obtained for the material in the T6 condition.
Źródło:
Archives of Foundry Engineering; 2018, 18, 3; 120-125
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure and Mechanical Characteristics of the Ternary SnZnAl Lead-Free Alloy
Autorzy:
Pietrzak, K.
Klasik, A.
Maj, M.
Sobczak, N.
Powiązania:
https://bibliotekanauki.pl/articles/380398.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
lead free alloy
microstructure
mechanical properties
scanning electron microscopy
stop bezołowiowy
mikrostruktura
właściwości mechaniczne
mikroskop skaningowy
Opis:
The paper describes the studies of ternary SnZn9Al1.5 lead-free alloy from the viewpoint of its mechanical behavior as well as microstructure examined by the light and scanning electron microscopy. The authors focused their attention specifically on the fatigue parameters determined by the original modified low-cycle fatigue method (MLCF), which in a quick and economically justified way allows determination of a number of mechanical parameters based on the measurement data coming from one test sample only. The effect of the addition of 1.5% Al to the binary eutectic SnZn9 alloy on its microstructure and the obtained level of mechanical parameters was analyzed. The phases and intermetallic compounds occurring in the alloy were identified based on the chemical analysis carried out in micro-areas by the SEM/EDS technique. It was shown that the addition of 1.5% Al to the binary eutectic SnZn9 alloy resulted in a more favorable microstructure and consequently had a positive effect on the mechanical parameters of the alloy. Based on the conducted research, it was recommended to use a combinatorial method based on the phase quanta theory to quickly evaluate the microstructure and the original MLCF method to determine a number of mechanical parameters.
Źródło:
Archives of Foundry Engineering; 2018, 18, 3; 31-36
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical Properties and Microstructure of WE43 Magnesium Matrix Composite Reinforced SiC Particles
Autorzy:
Rzychoń, T.
Dybowski, B.
Gryc, A.
Dudek, M.
Powiązania:
https://bibliotekanauki.pl/articles/380522.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnesium matrix composite
microstructure
WE43 alloy
stir casting
stop magnezu
kompozyt
stop WE43
mikrostruktura
Opis:
Magnesium alloys containing yttrium and neodymium are known to have high specific strength, good creep and corrosion resistance up to 250°C. The addition of ceramic particles strengthens the metal matrix composite resulting in better wear and creep resistance while maintaining good machinability. In the present study, WE43 magnesium matrix composite reinforced with SiC particles were fabricated by stir casting. The microstructure of the composite was investigated by optical microscopy, quantitative metallography, scanning electron microscope and XRD analysis. Microstructure characterization of WE43 MMC showed homogeneous reinforcement distribution and presence of the small amount of porosity at the interface. A thin layer consists of zirconium-rich particles was observed at the interface. In the microstructure, inclusions of the yttrium oxide were found. The presence of SiC particles assisted in improving hardness and in decreasing the ultimate tensile strength, yield tensile strength and elongation.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1 spec.; 99-102
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microscopic Analysis of Layers Containing Mg2Si and Mg17Al12 Phases Fabricated on AZ91 Through Thermochemical Treatment
Autorzy:
Mola, R.
Cieślik, M.
Powiązania:
https://bibliotekanauki.pl/articles/380750.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
surface treatment
magnesium alloy
modified surface layer
microstructure
obróbka powierzchniowa
stop magnezu
warstwa powierzchniowa zmodyfikowana
mikrostruktura
Opis:
The thermochemical treatment applied to improve the surface properties of AZ91 consisted in heating the material in contact with AlSi10Mg powder at 445 oC for 30 min. During heat treatment process the powder was held under pressure to facilitate the diffusion of the alloying elements to the substrate and, accordingly, the formation of a modified layer. Two pressures, 1 MPa and 5 MPa, were tested. The resultant layers, containing hard Mg2Si and Mg17Al12 phases, were examined using an optical microscope and a scanning electron microscope equipped with an energy-dispersive X-ray spectrometer (EDS). The experimental data show that the layer microstructure was dependent on the pressure applied. A thicker, three-zone layer (about 200 μm) was obtained at 1 MPa. At the top, there were Mg2Si phase particles distributed over the Mg17Al12 intermetallic phase matrix. The next zone was a eutectic (Mg17Al12 and a solid solution of Al in Mg) with Mg2Si phase particles embedded in it. Finally, the area closest to the AZ91 substrate was a eutectic not including the Mg2Si phase particles. By contrast, the layer produced at a pressure of 5 MPa had lower thickness of approx. 150 μm and a two-zone structure. Mg2Si phase particles were present in both zones. In the upper zone, Mg2Si phase particles were regularly distributed over the Mg17Al12 intermetallic phase matrix. The lower zone, adjacent to the AZ91, was characterized by a higher volume fraction of Mg2Si phase particles distributed over the matrix composed mainly of Mg17Al12. The alloyed layers enriched with Al and Si had much higher hardness than the AZ91 substrate.
Źródło:
Archives of Foundry Engineering; 2019, 3; 119-124
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of Cracking Causes of AlSi5Cu3 Alloy Castings
Określenie przyczyn pękania odlewów ze stopu AlSi5Cu3
Autorzy:
Eperješi, Š.
Matvija, M.
Eperješi, Ľ.
Vojtko, M.
Powiązania:
https://bibliotekanauki.pl/articles/353242.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
AlSi5Cu3 alloy
microstructure
cracks
hardness
stop AlSi5Su3
mikrostruktura
pękanie
twardość
Opis:
Recently, the castings made from aluminum-silicon alloys by pressure die casting are increasingly used in the automotive industry. In practice, on these castings are high demands, mainly demands on quality of their structure, operating life and safety ensuring of their utilization. The AlSi5Cu3 alloy castings are widely used for production of car components. After the prescribed tests, the cracks and low mechanical properties have been identified for several castings of this alloy, which were produced by low pressure casting into a metal mould and subsequent they were heat treated. Therefore, analyses of the castings were realized to determine the causes of these defects. Evaluation of structure of the AlSi5Cu3 alloy and causes of failure were the subjects of investigation presented in this article.
Zastosowanie odlewów ciśnieniowych ze stopów Al-Si ustawicznie wzrasta w przemyśle samochodowym, gdzie stopy te muszą spełniać wysokie wymagania odnośnie do jakości ich struktury, żywotności i bezpiecznego użytkowania. Odlewy ze stopu AlSi5Cu3 są szeroko stosowane w produkcji części samochodów. Wg pracy wady pęknięć wewnętrznych i niskie właściwości mechaniczne posiada część odlewów obrabianych cieplnie, odlanych do form metalowych pod niskim ciśnieniem. Praca poświęcona jest ocenie struktury i przyczynom pękania odlewów ze stopu AlSi5Cu3.
Źródło:
Archives of Metallurgy and Materials; 2014, 59, 3; 1089-1092
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ wanadu na proces krystalizacji, mikrostrukturę i właściwości siluminu EN AC-46000
Effect of vanadium on the crystallization process, microstructure and properties of Al-Si alloy EN AC-46000
Autorzy:
Szymczak, T.
Gumienny, G.
Pacyniak, T.
Powiązania:
https://bibliotekanauki.pl/articles/391604.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Odlewnictwa
Tematy:
silumin
wanad
mikrostruktura
właściwości mechaniczne
odlewanie ciśnieniowe
Al-Si alloy
vanadium
microstructure
mechanical properties
pressure die casting
Opis:
W niniejszej pracy przedstawiono wyniki badań siluminu z dodatkiem wanadu przeznaczonego do odlewania pod ciśnieniem. Jako stop wyjściowy zastosowano silumin podeutektyczny gatunku EN AC-46000. Do siluminu wyjściowego wprowadzano zaprawę AlV10 w ilości pozwalającej na uzyskanie zawartości wanadu w kolejno wytapianych siluminach po około 0,1; 0,2; 0,3; 0,4 i 0,5% wag. Badaniom poddano zarówno silumin wyjściowy, jak i siluminy zawierające wanad. Badania obejmowały analizę termiczną i derywacyjną (ATD) procesu krystalizacji, analizę metalograficzną mikrostruktury odlewów wykonanych w próbniku ATD i ciśnieniowych oraz określenie podstawowych właściwości mechanicznych siluminu odlewanego ciśnieniowo. Badania ATD wykazały wzrost temperatury początku krystalizacji siluminu oraz brak dodatkowych efektów cieplnych. Badania metalograficzne wykazały zmniejszenie średniej wielkości faz w mikrostrukturze stopu odlewanego do próbnika ATD. W siluminach zawierających 0,3; 0,4 i 0,5% wag. V zarówno płytkowe wydzielenia krzemu eutektycznego, jak i faz międzymetalicznych pochodzących z eutektyk charakteryzują się znacząco mniejszymi maksymalnymi wymiarami w porównaniu z siluminami o mniejszej zawartości V. W mikrostrukturze siluminów odlewanych pod ciśnieniem, które zawierają wanad powstają „nowe” fazy niewystępujące w siluminach niezawierających tego pierwiastka. Są to najprawdopodobniej fazy międzymetaliczne zawierające wanad. Wielkość wydzieleń tych faz rośnie wraz ze zwiększeniem zawartości wanadu w siluminie. Przeprowadzone badania podstawowych właściwości mechanicznych siluminów odlewanych pod ciśnieniem wykazały możliwość uzyskania większych wartości wytrzymałości na rozciąganie Rm, umownej granicy plastyczności Rp0,2 oraz twardości HB siluminów zawierających wanad w porównaniu z siluminami bez tego pierwiastka. Największe wartości: Rm = 248 MPa uzyskano w siluminie zawierającym około 0,3% wanadu; Rp0,2 = 113 MPa przy zawartości 0,1 i 0,2% oraz HB = 116 dla dodatku V około 0,2% wag. Względem siluminu bez dodatku V uzyskane wartości powodują podwyższenie Rm o 26%; Rp0,2 o 12% oraz HB o 7%.
The paper presents the results of the study of Al-Si alloys with a vanadium addition used in pressure casting. The hypoeutectic Al-Si alloy grade EN AC-46000 was applied as the initial alloy. The master alloy AlV10 was introduced into the initial alloy in the amount making it possible to obtain the vanadium content in the consecutively melted Al-Si alloys of about 0.1; 0.2; 0.3; 0,4 and 0.5 wt. %. The tests were performed on both the initial Al-Si alloy and alloys containing vanadium. The investigations included a thermal and derivative (DTA) analysis of the crystallization process, a metallographic analysis of the microstructure of casts prepared in DTA tester and pressure casts, as well as the determination of the basic mechanical properties of the pressure cast Al-Si alloy. The DTA tests showed an increase in the temperature at the beginning of the Al-Si alloy crystallization and no additional thermal effects. The metallographic examinations demonstrated a decrease of the average phase size in the microstructure of the alloy cast in the DTA tester. In the Al-Si alloys containing 0.3; 0.4 and 0.5 wt. % V, both the lamellar precipitates of eutectic silicon and of the intermetallic phases originating in the eutectics were characterized by significantly lower maximal dimensions, compared to the Al-Si alloys with lower V contents. In the microstructure of the pressure cast Al-Si alloys, which contain vanadium, “new” phases may form, which did not occur in the Al-Si alloys without V. These are probably intermetallic phases containing vanadium. The size of these precipitates increases with the increase of the vanadium content in the Al-Si alloy. The performed tests of the basic mechanical properties of the pressure cast Al-Si alloys showed the possibility of obtaining higher values of tensile strength Rm, proof stress Rp0.2 and hardness HB of the Al-Si alloys containing vanadium, compared to the Al-Si alloys without this element. The highest values: Rm = 248 MPa were obtained in the Al-Si alloy containing about 0.3% vanadium; Rp0.2 = 113 MPa – with the content of 0.1, and 0.2% and HB = 116 for the V addition of about 0.2 wt. %. As regards the Al-Si alloy without a vanadium addition, the obtained values caused an increase of Rm by 26%; Rp0.2 by 12% and HB by 7%.
Źródło:
Prace Instytutu Odlewnictwa; 2017, 57, 3; 187-199
1899-2439
Pojawia się w:
Prace Instytutu Odlewnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies