Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "temperature sensor" wg kryterium: Temat


Tytuł:
Utilization of telecommunication optical routes to power fiber-optic polarization sensors
Autorzy:
Vyležich, Zdeněk
Kyselák, Martin
Powiązania:
https://bibliotekanauki.pl/articles/2172859.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
power supply
optical route
polarization
temperature sensor
Opis:
A single-mode telecommunication optical route can be used for reliable power supplies of a remote non-electric temperature fiber-optic polarization sensor, but the optical route, due to many physical factors, affects an immediate state of polarization during the transmission. This negative phenomenon changes the sensitivity of the sensor itself. The thesis proposes two main approaches to solving that problem. The first approach is based on the suitable connection of a depolarizer and linear polarizers. The second approach is based on signal interference, which takes place in a polarization-maintaining fiber coupler. This article also evaluates the advantages and disadvantages of the two approaches and graphically demonstrates the functionality of the fiber-optic sensor, which was tested by applying a container with water of different temperatures. A big advantage of this type of sensor is that it is not necessary to have components, that are dependent on electricity, near the monitored place, where there may be no access to electricity, or the place may be sensitive to an electric charge. Paper demonstrates the possibility of successfully powering the non-electric sensor via a classical optical route.
Źródło:
Optica Applicata; 2022, 52, 4; 565--574
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reflektometryczny pomiar temperatury
Reflectometric measurement of temperature
Autorzy:
Kusznier, J.
Mińko, W.
Powiązania:
https://bibliotekanauki.pl/articles/157082.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
czujniki światłowodowe
czujniki temperatury
optical fibre sensor
temperature sensor
Opis:
Artykuł przedstawia budowę oraz wyniki pomiarów światłowodowego, reflektometrycznego czujnika temperatury. Głowica w badanym czujniku została umieszczona na końcu toru pomiarowego. Zasada działania opiera się na zmianach wartości współczynników załamania światła w funkcji temperatury. Powoduje to zmiany poziomu reflektancji w głowicy pomiarowej. Czujniki tego typu umożliwiają wykonanie pomiarów w miejscach trudnodostępnych (małe wymiary poprzeczne włókien światłowodowych i jednocześnie transmisja możliwa również na znaczne odległości), jako tory dielektryczne nie wytwarzają i nie podlegają wpływom pól elektromagnetycznych oraz zapewniają wysoką odporność na wilgoć i wibracje.
The paper presents construction and results of measurements of a reflectometric temperature sensor. The examined sensor head was located at the measurement path end. Operation of the sensor is based on changes of the refractive index value with temperature. Such sensors enable measuring under difficult conditions (places hard to reach, electromagnetic fields, humidity, vibrations). Use of the optical time-domain reflectometer enables distributed and multi-point measurements. This sensor works in reflection mode. The measuring head was located at the end of a 100 and 300 meter fibre optic line. Experiments were carried out for the 1300 nm optical wave with use of OTDR (Wandel & Goltermann GmbH typ OFT-30 Optical Fiber Tester). The reflectometric function of the measured fibre optic path is shown in Fig. 4, while the characteristic of the designed temperature sensor is presented in Fig. 5. Changes of the examined sensor power level go up to 5.5 dB at the temperature variations from 20 to 1250C. It is 20% of the examined reflectivity. The research was conducted in the Bialystok University of Technology within the framework of Subject S/WE/2/08.
Źródło:
Pomiary Automatyka Kontrola; 2010, R. 56, nr 5, 5; 443-444
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Komputerowe stanowisko do badania czujników temperatury
Computer stand for testing temperature sensors
Autorzy:
Leśnikowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/151394.pdf
Data publikacji:
2007
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pomiary temperatury
czujnik temperatury
kalibracja
temperature measurements
temperature sensor
calibration
Opis:
W artykule przedstawiono krótką charakterystykę zbudowanego stanowiska do badania tekstronicznych czujników temperatury. Opisano jego konstrukcję, podstawowe dane techniczne. Podano przykładowe wyniki pomiarów.
In the paper the short characteristic of measuring unit for textronic, temperature sensors calibration were described. Stand construction, basic technical data of stand elements and an example test was also presented.
Źródło:
Pomiary Automatyka Kontrola; 2007, R. 53, nr 9, 9; 42-43
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Passive UHF RFID-enabled sensor system for detection of products exposure to elevated temperature
Autorzy:
Janeczek, K.
Jakubowska, M.
Kozioł, G.
Jankowski-Mihułowicz, P.
Powiązania:
https://bibliotekanauki.pl/articles/220717.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
RFID
temperature sensor
printed antenna
screen printing
printed electronics
Opis:
Temperature change is one of key factors which should be taken into account in logistics during transportation or storage of many types of goods. In this study, a passive UHF RFID-enabled sensor system for elevated temperature (above 58°C) detection has been demonstrated. This system consists of an RFID reader and disposable temperature sensor comprising an UHF antenna, chip and temperature sensitive unit. The UHF antenna was designed and simulated in an IE3D software. The properties of the system were examined depending on the temperature level, type of package which contains the studied objects and the type of antenna substrate.
Źródło:
Metrology and Measurement Systems; 2013, 20, 4; 591-600
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Generation of a zone chirp in uniform Bragg grating as a way of obtaining double functionality of a sensor
Autorzy:
Kisała, P.
Powiązania:
https://bibliotekanauki.pl/articles/221165.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
fibre Bragg gratings
strain and temperature sensor
temperature-insensitive measurement method
Opis:
This paper presents a method of using a sensor with uniform Bragg grating with appropriately generated zone chirp. The presented method can be used for measuring two physical quantities, namely strain and temperature. By providing the same temperature sensitivity and different sensitivity to strain of two parts of a sensor, and experimental measurement of qualities of the proposed system and its calibration (experimental determination of sensitivity), verification of the results obtained from laboratory tests and the possibility of its practical implementation has been confirmed. The sensor grating was placed in such a way that its half was in the zone of a variable value of axial strain caused by changes of the cross-section of the sample. The other half, however, was in the zone of a constant cross-section of the sample and of constant value of strain, caused by the force stretching the sample. The obtained errors of non-linearity of processing characteristics for measuring strain and temperature of the proposed system were 2.7% and 1.5% respectively, while coefficients of sensitivity to strain and temperature were 0.77 x 10-6 m/e and 4.13 x 10-12 m/K respectively. The maximum differences between the values obtained from the indirect measurement and the set values were 110 žε for strain and 3.8°C for temperature, for a strain of 2500 žε and a temperature of 40°C.
Źródło:
Metrology and Measurement Systems; 2012, 19, 4; 727-738
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A weakly coupled multi-core fibre-based Michelson interferometer composed of an in-fibre coupler
Autorzy:
Mumtaz, Farhan
Dai, Yutang
Wenbin, Hu
Abbas, Lashari Ghulam
Parveen, Rashda
Ashraf, Muhammad Aqueel
Powiązania:
https://bibliotekanauki.pl/articles/2063883.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Elektryków Polskich
Tematy:
Michelson interferometer
in-fibre coupler
seven core fibre
temperature sensor
Opis:
A compact temperature measuring device using a weakly coupled multi-core fibre in the Michelson interferometer structure is proposed and experimentally demonstrated. The device is manufactured by an easy and simple splicing approach which consists of a multi-core fibre segment and an in-fibre coupler. In-fibre coupler is made of a cascaded single-mode fibre and multi-core fibre balls. It enhances the interference phenomenon of light nergy between the central core and the outer cores of a multi-core fibre. The sensor shows a high quality fringe visibility of about 14–18 dB in the wavelength spectrum. Multi-core structure presents multi-path interferences and exhibits a maximum temperature sensitivity of 70.6 pm/°C in the range of 20–90°C with an insensitive response to the refractive index in the range of 1.334 to 1.354. The device has the advantages of compact size, easy manufacturing, and it solves cross-sensitivity between temperature and refractive index making it an authentic real-time temperature monitoring solution.
Źródło:
Opto-Electronics Review; 2021, 29, 4; 117--125
1230-3402
Pojawia się w:
Opto-Electronics Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of dual-core photonic crystal fiber based temperature and pressure sensor for oceanic applications
Autorzy:
Jegadeesan, Subramani
Dhamodaran, Muneeswaran
Sri Shanmugapriya, Swaminathan
Powiązania:
https://bibliotekanauki.pl/articles/175134.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
dual core
photonic crystal fiber
birefringence
temperature sensor
pressure sensor
finite element method
Opis:
In this paper, a microstructured optical fiber with dual core was proposed which is known as photonic crystal fiber. Specific optical properties of a dual-core photonic crystal fiber were used to obtain high birefringence, small beat length, flattened dispersion, for different values of structural parameters varied over a wide range of wavelength and analyzed for application such as temperature and pressure sensors. The sensitivity of the temperature sensor is calculated as 20 pm/°C for 6 cm fiber, the sensitivity of the pressure sensor for a range from 0 to 1000 kPa is calculated as –10.5 nm/MPa.
Źródło:
Optica Applicata; 2019, 49, 2; 249-264
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza problemów pomiarów ciepła z wykorzystaniem hydrodynamicznego przepływomierza z wbudowanym rezystancyjnym czujnikiem temperatury
Analysis of problems of heat energy measurements with use of hydrodynamic flow-meters with embedded resistance temperature sensor
Autorzy:
Dorozhovets, M.
Kulyk, O.
Powiązania:
https://bibliotekanauki.pl/articles/152153.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pomiary
ciepło
przepływomierz
czujnik temperatury
measurement
heat energy
flowmeter
temperature sensor
Opis:
Autorzy na podstawie analizy typowego układu pomiaru ilości ciepła wykazali, że ma on kilka wad, m.in. nieuwzględnienie możliwej zmiany przepływu masowego z powodu straty technologicznej cieczy lub jej nieuprawnionego odbioru oraz wpływu zmiany charakterystyk cieplnych cieczy ze zmianą temperatury. W udoskonalonym układzie pomiaru ilości ciepła wykorzystuje się dwa przepływomierze (na wejściu i wyjściu), co pozwala uwzględnić stratę masowego przypływu cieczy.
The authors consider typical systems for heat energy measurements (Fig. 1). It is assumed that the liquid mass flow input and output are the same in a typical system. If there are technological losses of heat liquid or its stealing in a heating system, the output amount of liquid is less than the input amount. Then the methodical measurement error of the heat energy (formula (2)) appears. Another component of the measurement error is due to the influence of temperature on the heat capacity of liquid which is different at the input and output of the heating system (formula (3)). To eliminate the above-mentioned methodological errors, the heat energy must be measured at the input and output of the heating system (formula (5)). For this purpose there was proposed an improved system for measuring the amount of heat (Fig. 3). In this system there are used two flow-meters (input and output), which allows taking into account possible losses in the heating liquid. Hence, the relationship between the temperature of the liquid heat capacity (also at the input and output) (Fig. 3) is taken into consideration, too. In order to increase the accuracy of determining the heat by measuring the amount of the liquid movement and its temperature at the same point (which eliminates the appropriate component of the systematic measurement error), the authors developed a hydrodynamic flow-meter with a built-in resistance temperature sensor (Fig. 4). The instrumental component of the error of measuring the heat quantity (which is caused by use of two flow meters instead of one) was examined (formulas (6, 7)).
Źródło:
Pomiary Automatyka Kontrola; 2012, R. 58, nr 11, 11; 1000-1002
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The study of temperature measurement based on the transmission of fixed wavelengths for helical long-period grating
Autorzy:
Bai, Yunfeng
He, Zelong
Dang, Suihu
Powiązania:
https://bibliotekanauki.pl/articles/2060686.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
helical long-period grating
fixed wavelength
dual-wavelength ratio
temperature sensor
Opis:
This research involves a fixed wavelength and dual-wavelength ratio temperature measurement for helical long-period grating. There are two resonant dips near 1475 and 1520 nm, with the pitch length 782 μm. The temperature sensitivity of resonance wavelengths is about 0.06 nm/°C. Both theoretical simulation and experiment results show that the transmission of a fixed wavelength linearly changes with the temperature. It has a high application value for measuring temperature. Besides, the dual-wavelength ratio is studied to eliminate the influence of light source. The temperature sensitivity of transmission intensity ratio of I1469.6nm/I0 and I1469.6nm/I1526.5nm are about 1.0076/°C and 0.0155/°C, respectively, so the dual-wavelength ratio is more practical. And the 0.0155 times intensity change could be much more easily measured than the 0.06 nm wavelength change for each degree Celsius. So the dual-wavelength ratio of the helical long-period gratings is very suitable for temperature sensors.
Źródło:
Optica Applicata; 2022, 52, 1; 129--137
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of selected factors on shaping of milk temperature during cow machine milking
Wpływ wybranych czynników na kształowanie się temperatury mleka w czasie doju maszynowego krów
Autorzy:
Jędruś, A.
Beba, J.
Powiązania:
https://bibliotekanauki.pl/articles/334064.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
temperature sensor
diagnostics
machine milking
temperature
milk
czujnik temperatury
diagnostyka
dój maszynowy
temperatura
mleko
Opis:
In the research the assessment of the impact of sensors found in the milking unit during the process of machine cow milking on selected metrological properties of temperature sensors installed in a milking cluster has been done. The analyses have been made on the basis of the temperature curves of milk flow in cows’ udder quarters obtained during the cowshed tests. In the research a microprocessor measuring system has been used. The system has been designed in the Institute of Biosystem Engineering at the University of Life Sciences in Poznan. The system is cooperating with thermistors installed in teat cups. The results of variance analysis has shown statistically highly essential influence of the thermistor’s initial temperature and sort of a quarter on the time of establishing the maximum milk temperature.
W pracy dokonano oceny wpływu czynników występujących na stanowisku udojowym w czasie doju maszynowego krów na wybrane własności metrologiczne czujników temperatury zamontowanych w aparacie udojowym. Analiz dokonano w oparciu o uzyskane w trakcie testów oborowych termogramy spływu mleka z ćwiartek wymion krów. Do badań wykorzystano opracowany w Instytucie Inżynierii Biosystemów Uniwersytetu Przyrodniczego w Poznaniu mikroprocesorowy system pomiarowy współpracujący z termistorami zamontowanymi w kubkach udojowych. Wyniki analizy wariancji wykazały statystycznie wysoko istotny wpływ temperatury początkowej termistora oraz rodzaju ćwiartki na czas ustalenia wartości maksymalnej temperatury mleka.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2014, 59, 1; 48-51
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Automatic measurement of time constant for temperature sensors
Autorzy:
Boguta, A.
Horynski, M.
Powiązania:
https://bibliotekanauki.pl/articles/793627.pdf
Data publikacji:
2013
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
time constant
temperature sensor
automatic measurement
quick cooling
measuring cylinder
heat capacity
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2013, 13, 1
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optymalizacja struktury niezawodnościowej czujki temperatury w systemie bezpieczeństwa
Optimalisation of structure of reliable temperature sensor in a security system
Autorzy:
Paś, J.
Dąbrowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/327860.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
system bezpieczeństwa
czujka temperatury
symulacja komputerowa
security system
temperature sensor
computer simulation
Opis:
Każdy system bezpieczeństwa zainstalowany w obiekcie powinien posiadać podsystem sygnalizacji pożaru. Aby taki podsystem mógł wykonywać swoje zadania z określonym prawdopodobieństwem zdatności powinien posiadać optymalną strukturę wewnętrzną. W artykule zaproponowano, na podstawie symulacji komputerowej, określoną strukturę czujki temperatury, która wchodzi w skład systemu ochrony obiektu. Dla optymalnej struktury czujki temperatury zaproponowano rozwiązanie układowe gwarantujące wymaganą czułość oraz prawdopodobieństwo zdatności.
Each security system installed in an object should have a sub-system of fire security. Such a system should have an optimal internal structure so that it could perform its operation with a defined probability of avoioding damage. On the basis of computer simulation, the article proposes optimal structure of temperature sensor, which is part of a secured object. For an optimal structure of a temperature sensor, a project was proposed increasing sensibility and probability of avoiding damage.
Źródło:
Diagnostyka; 2006, 4(40); 93-100
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza porównawcza czujników temperatury zamontowanych w kubku udojowym
Comparative analysis of temperature sensors mounted in a teat cup
Autorzy:
Jędruś, A.
Powiązania:
https://bibliotekanauki.pl/articles/291000.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
czujnik temperatury
fluktuacja temperatury
kubek udojowy
materiał osłonowy
temperature sensor
temperature fluctuation
teat cup
shielding material
Opis:
Celem pracy było porównanie wybranych parametrów metrologicznych dwóch typów termistorów: bez materiału osłonowego oraz z materiałem osłonowym wykonanym ze stali kwasoodpornej. Badania przeprowadzono w warunkach laboratoryjnych z wykorzystaniem opracowanego na potrzeby badań komputerowego stanowiska badawczego. Analizę porównawczą czujników temperatury przeprowadzono z wykorzystaniem metody funkcji skokowej Heaviside’a, realizowanej przy użyciu programowanego sterownika pompy i rejestratora sygnałów pomiarowych o dużej rozdzielczości. Badania wykazały większą czułość termistora bez dodatkowej osłony, w porównaniu z konstrukcją czujnika z dodatkową osłoną ze stali kwasoodpornej. Największe różnice wartości czułości badanych czujników temperatury uzyskiwano przy krótkich czasach przerw w przepływie cieczy.
The objective of the paper was comparison of the selected metrologic parameters of two types of thermistors: without a shielding material made of acid-proof steel. The research was carried out in laboratory conditions with the use of the computer test stand, developed for the research needs. Comparative analysis of temperature sensors was carried out with the use of Heavside's jump function method carried out with the use of the programmed pump controller and a recorder of measuring signals of high resolution. The tests proved higher sensibility of a thermistor without additional shield in comparison to the sensor structure with additional shield made of acid-proof steel. The highest values of sensibility of the researched temperature sensors were obtained at short intervals in the liquid flow.
Źródło:
Inżynieria Rolnicza; 2013, R. 17, nr 3, t. 2, 3, t. 2; 103-111
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bezprzewodowy pomiar temperatury z wykorzystaniem rezonatora kwarcowego z akustyczną poprzeczną falą powierzchniową
Wireless temperature measurement based on surface transverse wave quartz resonator
Autorzy:
Wróbel, T.
Brzozowski, E.
Powiązania:
https://bibliotekanauki.pl/articles/192127.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Materiałów Elektronicznych
Tematy:
poprzeczna akustyczna fala powierzchniowa
rezonator
czujnik temperatury
czujnik bezprzewodowy
surface transverse wave
resonator
temperature sensor
wireless sensor
Opis:
W artykule przedstawiono wyniki badań urządzenia laboratoryjnego do bezprzewodowego pomiaru temperatury, w którym wykorzystano rezonator kwarcowy z akustyczną poprzeczną falą powierzchniową o liniowej zależności częstotliwości rezonansowej od temperatury. Model urządzenia składa się z części nadawczej i odbiorczej. Układ nadawczy z rezonatorem o środkowej częstotliwości ~ 434 MHz, umieszczonym w pętli sprzężenia zwrotnego szerokopasmowych wzmacniaczy, generuje sygnał, który po wzmocnieniu we wzmacniaczu mocy jest przesyłany przy pomocy anteny do układu odbiorczego. Układ odbiorczy składa się z anteny odbiorczej, z szerokopasmowego wzmacniacza i licznika częstotliwości. Opracowany model umożliwia pomiar temperatury w zakresie 0 ÷ 100 °C z odległości ~ 30 m o dokładności ~ ± 0,2 °C.
In this paper the results of investigation of a laboratory wireless temperature measurement system are presented. A surface transverse wave quartz resonator with a linear dependence of resonance frequency on temperature was used to produce a model of the sensor. The model consists of a transmitter unit and a receiver unit. In the transmitter unit, the resonator, with the center frequency of about 434 MHz, located in a coupling loop of a broadband amplifier generates a signal, which is sent by an antenna to the receiver unit after amplification by a power amplifier. The receiver unit consists of an antenna, a broadband amplifier and a frequency counter. The developed model can measure temperature in a range of 0 ÷ 100 °C, at a distance of about 30 m, with an accuracy of about ± 0.2 °C.
Źródło:
Materiały Elektroniczne; 2014, T. 42, nr 2, 2; 13-17
0209-0058
Pojawia się w:
Materiały Elektroniczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fiber Bragg grating-based high temperature sensor and its low cost interrogation system with enhanced resolution
Autorzy:
Mamidi, V R
Kamineni, S
Ravinuthala, L N S P
Madhuvarasu, S S
Thumu, V R
Pachava, V R
Putha, K
Powiązania:
https://bibliotekanauki.pl/articles/949414.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fiber Bragg grating (FBG)
long period grating
fiber optic temperature sensor
optical intensity modulation
Opis:
A fiber Brag grating-based high temperature sensor together with a low cost, high speed and compact size interrogation system using a long period grating was designed, developed and tested. The designed sensor measures the temperature from room temperature to 550 °C. The sensor head was configured by encapsulating an fiber Brag grating (type-I) of Bragg resonance wavelength at 1552.88 nm in a capillary tube made of copper. Long period grating with peak transmission loss at 1550 nm was employed to convert the wavelength information from fiber Brag grating into an intensity modulated signal. Temperature related optical intensity information was again converted into its equivalent electrical signal by using a photodiode. The achieved resolution of the sensor was found to be 0.5 °C.
Źródło:
Optica Applicata; 2014, 44, 2; 299-308
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parallel temperature measurement system for electric vehicle
Równoległy pomiar temperatury akumulatorów w pojazdach elektrycznych
Autorzy:
Wojtkowski, W.
Lewczuk, R.
Powiązania:
https://bibliotekanauki.pl/articles/269025.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
Digital temperature sensor
temperature measurement
CAN bus
1-Wire bus
cyfrowy czujnik temperatury
pomiary temperatury
CAN
1-Wire
Opis:
A parallel temperature measurement system for monitoring a battery stack in an electric vehicle is presented in the paper. The proposed system utilizes parallel multi-channel temperature measurements with digital temperature sensors operating on separate serial buses. An FPGA device collects data from sensors and translates it into CAN bus frames. The CAN bus is incorporated for communication with car Battery Management System. The described system can parallel measure 8 temperatures but it can be extended in case of additional needs. The structure of the system as well as particular devices are described in the paper. Selected results of experimental investigations which show proper operation of the system are presented as well.
W artykule przedstawiono system równoległego pomiaru temperatury zestawu akumulatorów stosowanego w pojazdach elektrycznych EV lub hybrydowych HEV. Podczas ładowania lub rozładowywania akumulatorów Li-ion, może dochodzić do nadmiernego nagrzewania a nawet do pożaru. Aby tego uniknąć stosuje się układy nadzorowania akumulatorów pełniące także funkcje balansowania ładunku. Takie układy potrzebują do działania informacji o temperaturze zewnątrznej poszczególnych akumulatorów. Cyfrowe czujniki temperatury wyposażone w interfejs szeregowy komunikują się z procesorem nadzorującym w sposób sekwencyjny. Przy większej liczbie czujników czas odczytu wszystkich wartości jest nadmiernie wydłużony. W prezentowanym rozwiązaniu zastosowano oddzielne magistrale szeregowe dla każdego czujnika. W związku z tym czas pełnego odczytu nie zależy od liczby czujników. Aby to było możliwe, wykorzystano układ FPGA z zaimplementowanymi interfejsami 1-Wire. Całość jest kontrolowana przez procesor programowy NIOS, który dodatkowo zapewnia komunikację z systemami pojazdu przez magistralę CAN. W artykule przedstawiono strukturę proponowanego systemu oraz zostały przedstawione wybrane wyniki badań laboratoryjnych.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2017, 54; 237-240
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The control of fan speed using FPGA boards
Sterowanie prędkością wentylatora przy użyciu bezpośrednio programowalnej macierzy bramek (FPGA)
Autorzy:
Daboul, M.
Nouman, Z.
Powiązania:
https://bibliotekanauki.pl/articles/408300.pdf
Data publikacji:
2014
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
fan speed control
FPGA
PWM
VHDL
digital temperature sensor
sterowanie prędkością wentylatora
cyfrowy czujnik temperatury
Opis:
This article describes the implementation of a DC fan controller using a field-programmable gate array (FPGA). Hardware description language (VHDL) is used to design and implement the processor of this controller. The processor is composed of a memory block that has a function of generation a Look up Table (LUT). Data saved in the memory block are used to generate a triangular signal. A carried signal can be added. This signal can be generated from digital temperature sensors. A comparator compares between the triangular signal and the carried signal to generate a Pulse-Width Modulation (PWM) output that controls the fan speed. The fan speed depends on the digital temperature sensor output. When the output signal of the sensor equals the output of the triangular wave, the fan speed is maximal and the temperature is high. This design requires a FPGA board and software ISE 14.4.
Artykuł przedstawia implementację sterownika DC wentylatora używając bezpośrednio programowalnej macierzy bramek - FPGA (ang. Field programmable gate array). Język VHDL (ang. Very High Speed Integrated Circuits Hardware Description Language ) użyto do projektowania i implementacji procesora tego kontrolera. Procesor składa się z bloku pamięci, mającej funkcję generowania struktury nazywanej tablicą (ang. Look up Table – LUT). Dane zapamiętane w bloku pamięci używane są do generowania przebiegów trójkątnych. Komparator porównuje sygnał użyteczny, ten wygenerowany przez cyfrowy czujnik temperatury, z sygnałem trójkątnym, aby sygnał wyjściowy modulowany szerokością impulsu (ang. PWM) regulował prędkość wentylatora. Prędkość wentylatora zależy od sygnału wyjściowego z cyfrowego czujnika temperatury. Kiedy sygnał wyjściowy czujnika jest równy fali trójkątnej, wtedy prędkość wentylatora jest maksymalna a temperatura jest wysoka. Takie projektowanie wymaga FPGA i software ISE 14.4.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2014, 3; 54-57
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Urządzenie do lokalizacji sensorów pomiarowych w sondach temperatury wykorzystywane do precyzyjnego wyznaczania SND w konserwie
A device for locating measuring sensors in temperature probes used for precise determination of SHZ in cans
Autorzy:
Szczepka, Maciej
Stasiak, Alicja
Czyżewski, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/270989.pdf
Data publikacji:
2019
Wydawca:
Centralny Ośrodek Badawczo-Rozwojowy Aparatury Badawczej i Dydaktycznej, COBRABiD
Tematy:
strefa najmniejszego dogrzania
sonda temperatury
wielokanałowa sonda temperatury
czujnik temperatury
slowest heating zone
temperature probe
multi-channel temperature probe
temperature sensor
Opis:
Artykuł opisuje przyrząd pomiarowy służący do precyzyjnego lokalizowania czujników temperatury w obudowach sond temperatury. Opis dotyczy budowy urządzenia oraz metody pomiarowej.
The article describes a measuring instrument used for precise location of temperature sensors in temperature probe casings. The description concerns the construction of the device and the measurement method.
Źródło:
Aparatura Badawcza i Dydaktyczna; 2019, 24, 3; 193-196
2392-1765
Pojawia się w:
Aparatura Badawcza i Dydaktyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problems of temperature sensor checking at the exploitation place with the calibrators usage
Problemy weryfikacji sensorów temperatury na miejscu eksploatacji z wykorzystaniem kalibratorów
Autorzy:
Stadnyk, B
Jacuk, J.
Parakuda, V.
Powiązania:
https://bibliotekanauki.pl/articles/155036.pdf
Data publikacji:
2006
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
kalibrator temperatury
weryfikacja
półprzewodnikowy czujnik temperaturowy
unifikacja charakterystyk przetwarzania
temperature calibrator
verification
semiconducting temperature sensor
unification of transducer characteristics
Opis:
The problems of temperature sensor checking at the exploitation place with the calibrator's usage are presented in this paper. We came to conclusion to fix the moments of entrance and exit to/from a temperature platform that correspondent to phase transition of fixed-point material. The usage of small sized semiconducting sensors which are placed on inner surfaces of temperature calibrator receiving camera is stipulated. The structural scheme, mathematical models and job algorithm of digital thermometer which provide unification of transducer characteristics for semiconducting sensors are described too.
W artykule przeanalizowano problem weryfikacji czujników temperatury w miejscu ich zainstalowania i opracowano podstawową koncepcje jego rozwiązania na podstawie wykorzystania wbudowanych temperaturowych punktów stałych MST-90. W celu ujawnienia momentu nastąpienia przejścia fazowego materiału referencyjnego na tylnej powierzchni komory kalibratora temperatury zainstalowane są dwa półprzewodnikowe mikroczujniki temperatury. Opisano również strukturę, modele matematyczne oraz algorytm przetwarzania termometru cyfrowego, zabezpieczającego unifikację jego charakterystyk.
Źródło:
Pomiary Automatyka Kontrola; 2006, R. 52, nr 12, 12; 38-40
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Telematics based concept focused to avoid engine and vehicle trouble due to overheating
Autorzy:
Szpytko, J.
Udoji, C.
Powiązania:
https://bibliotekanauki.pl/articles/393539.pdf
Data publikacji:
2019
Wydawca:
Polskie Stowarzyszenie Telematyki Transportu
Tematy:
transport telematics
transport device availability
overheating
temperature sensor
telematyka transportu
dostępność urządzenia transportowego
przegrzanie
czujnik temperatury
Opis:
Overheating of vehicles is gradually becoming a common problem especially in tropical areas and during tropical seasons in the world. Although there are so many factors can cause overheating, hot weather is the most common cause of overheating. Coolants and thermostats in the radiator are no longer sufficient anymore. Traditional solutions preventing an engine from becoming overheated are: coolant levels must be maintained and without leaks; the oil level and viscosity must have the required properties; accepted technical conditions of radiator hoses and the radiator fan; the engine temperature must be acceptable. Modern cars are equipped with the systems supporting the operation process. The aim of this article is the concept of a solution that uses telematics to minimize engine failures due to overheating and to increase the operational readiness of transport means.
Źródło:
Archives of Transport System Telematics; 2019, 12, 4; 31-35
1899-8208
Pojawia się w:
Archives of Transport System Telematics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Power semiconductor devices temperature monitoring system
System monitorowania temperatury półprzewodnikowych przyrządów mocy
Autorzy:
Wojtkowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/266661.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
digital temperature sensor
temperature measurement
1-Wire bus
semiconductor power devices
cyfrowe czujniki temperatury
pomiary temperatury
magistrala 1-Wire
półprzewodnikowe przyrządy mocy
Opis:
The temperature measurement system, for parallel monitoring of temperatures of the power semiconductors devices in power converters is presented in the paper. The system was implemented in a power electronics converter for rapid recognition of the power losses level generated by individual power components. This information is important when evaluating system efficiency, current flow symmetry, and allowable output power in a given inverter configuration. The proposed system utilizes parallel multi-channel temperature measurements with digital temperature sensors operating on separate serial 1-Wire buses. FPGA device collects data from the temperature sensors and sends them through wireless interface to a PC terminal. The structure of the system as well as particular devices are described in the paper. Selected results of experimental investigations which show proper operation of the system are presented as well.
W artykule przedstawiono system równoległego pomiaru temperatury półprzewodnikowych przyrządów mocy w przekształtnikach energoelektronicznych. Prezentowany system jest użyteczny podczas badania laboratoryjnego nowych topologii przekształtników energoelektronicznych. System ten umożliwia szybkie wykrycie nadmiernego nagrzewania jednego z monitorowanych przyrządów półprzewodnikowych i jednocześnie może automatycznie włączyć sygnał dźwiękowy oraz przesłać informację do sterownika przekształtnika. Otrzymywana informacja związana z poziomem strat mocy wydzielanej w poszczególnych monitorowanych elementach jest cenna przy badaniu sprawności układu, symetrii rozpływu prądów oraz przy badaniu dopuszczalnej mocy wyjściowej przekształtnika w danej konfiguracji. Cyfrowe czujniki temperatury wyposażone w interfejs szeregowy 1-Wire komunikują się z procesorem nadzorującym w sposób sekwencyjny. Przy większej liczbie czujników czas skanowania wszystkich wartości jest nadmiernie wydłużony. W prezentowanym rozwiązaniu zastosowano oddzielne magistrale szeregowe dla każdego czujnika. W związku z tym czas pełnego odczytu nie zależy od liczby czujników. Aby to było możliwe, wykorzystano układ FPGA z zaimplementowanymi interfejsami 1-Wire. Prezentowany system ułatwia wykrywanie wielu nieprawidłowości występujących w badanym przekształtniku i w przebiegach sterujących, gdyż większość z nich wiąże się z nadmiernym nagrzewaniem zagrożonego przyrządu mocy.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2017, 54; 233-236
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sterownik LED z zabezpieczeniem termicznym
LED driver with thermal protection
Autorzy:
Wojtkowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/268715.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
cyfrowy czujnik temperatury
przekształtnik DC/DC
sterownik LED
diody LED mocy
LED
LED driver
DC-DC converter
Digital temperature sensor
Opis:
W artykule prezentowany jest sterownik diody LED mocy, zbudowany na bazie przekształtnika podwyższająco – obniżającego DC-DC, wyposażony w kontrolę temperatury sterowanej diody LED. Prezentowany układ jest przystosowany do zasilania napięciem z zakresu typowego dla ogniw Li-ion i może być zastosowany w urządzeniach przenośnych. Dzięki zastosowaniu dodatkowego mikrokontrolera posiada niestandardowe funkcje, takie jak możliwość sterowania jasnością świecenia zewnętrznym sygnałem analogowym, zabezpieczenie termiczne sterowanej diody, programowanie cyklu pracy. W artykule przedstawiono procedurę doboru kluczowych elementów układu przekształtnika oraz zaprezentowano wybrane wyniki badań laboratoryjnych.
The DC-DC power converter for high brightness LED lighting applications supplied by a lithium-ion batteries and equipped with a digital temperature sensor is presented in the paper. The converter is built using specialized integrated chip MCP1652 and an additional microcontroller from the AVR family – ATtiny13, for additional functionality. Typical application of the MCP1651 was extended with a couple of elements. The converter was tested experimentally and some results are presented. The converter works well, especially at higher input voltages, when the efficiency is higher. Lower input voltages like 2.7 or even less are also possible, but the efficiency would be worse. For very low input voltages proposed configuration can be simply modified for bootstrap operation. The bootstrap applications will work with output voltage not higher than 6 V. Additional potentiometer R2 allows for easy regulation of the output current what can be used for dimming light intensity. The LED driver has an additional temperature measurement circuit based on the digital DS18B20 temperature sensor. Monitoring of LED temperature may be important in many applications. The microcontroller can turn-off the LED when the temperature crosses the preset threshold value.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2018, 59; 211-214
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie testowych czujników pomiaru temperatury w quasi-przestrzennych (3D) sieciach pomiarowych w hydrotechnicznych budowlach ziemnych – wyniki wstępne
Application of testing temperature sensors for quasi-dimensional (3D) measurement systems used in measuring hydrotechnical earthworks–prelilinary results
Autorzy:
Borecka, A.
Sekuła, K.
Kessler, D.
Majerski, P.
Powiązania:
https://bibliotekanauki.pl/articles/2075719.pdf
Data publikacji:
2017
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
testowy czujnik temperatury
wał przeciwpowodziowy
wyciek
monitoring termiczny
ISMOP
monitorowanie quasi-ciągłe (przestrzenne)
testing temperature sensor
levee (dike)
leakage
thermal monitoring
monitoring quasi-continuous (spatial)
Opis:
This paper presents the test point temperature sensors, designed for the ISMOP project. The point temperature sensors allow for full realization of spatial measurement by using a distributed measurement based on MESH type topology. The designed solutions described the selection and design of all elements of the sensors. It is also described how to install them at the existing levee. Applied construction and method of selection of the location of the point temperature sensors allow monitoring of levees in the quasi-spatial (3D) system, what is an alternative to termomonitoring performed by means of optical fibers.
Źródło:
Przegląd Geologiczny; 2017, 65, 10/2; 748--755
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Poprawność lokalizacji strefy najmniejszego dogrzania a jakość i bezpieczeństwo żywności utrwalanej termicznie
Correctness location the least-heat zone and quality and safety of thermally preserved food
Autorzy:
Czyżewski, Ł.
Szczepka, M.
Mizgalski, I.
Stasiak, A.
Powiązania:
https://bibliotekanauki.pl/articles/1366445.pdf
Data publikacji:
2018
Wydawca:
Centralny Ośrodek Badawczo-Rozwojowy Aparatury Badawczej i Dydaktycznej, COBRABiD
Tematy:
sterylizacja
strefa najmniejszego dogrzania
wieloczujnikowa sonda temperatury
sterilization
least-heat zone
multi-sensor temperature probe
Opis:
W pracy opisano pomiar procesów sterylizacji dwóch produktów – sosu bolońskiego w opakowaniu szklanym oraz fasoli czerwonej w stalowej puszce, przy wykorzystaniu opracowanej w COBRABiD sp. z o.o. wieloczujnikowej sondy temperatury. Badania dotyczyły różnic zmierzonych wartości sterylizacyjnych w zależności od odległości między elementem pomiarowym sondy temperatury a strefą najmniejszego dogrzania w przetworze. Uzyskane podczas pomiarów rezultaty pozwoliły na eksperymentalne wyznaczenie strefy najmniejszego dogrzania, która znajdowała się w najbliższym otoczeniu elementu pomiarowego umieszczonego najgłębiej w produkcie. Wieloczujnikowa sonda temperatury umożliwiła dokładną analizę rozkładu temperatury w obrębie wsadu poddanego procesowi sterylizacji, co w zdecydowany sposób ograniczyło liczbę koniecznych do wykonania pomiarów przy wykorzystaniu tradycyjnych sond jednoczujnikowych.
This paper describes the sterilization processes of two products – the Bolognese sauce in a glass packaging and red beans in a steel can with the use of the multi-sensor temperature probe developed in COBRABiD Ltd. The research concerned the differences of the measured sterilization values depending on the distance of the temperature probe measuring element from the least-heat zone in the product. The results obtained during the measurements allowed for the experimental determination of the zone of the smallest heating, which was located in the immediate vicinity of the measuring element placed deepest in the product. The multi-sensor temperature probe made it possible to accurately analyze the temperature distribution within the charge subjected to the sterilization process, which significantly reduced the number of measurements necessary to perform using the traditional single sensor probes.
Źródło:
Aparatura Badawcza i Dydaktyczna; 2018, 23, 3; 111-116
2392-1765
Pojawia się w:
Aparatura Badawcza i Dydaktyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The comparing of the selected temperature sensors compatible with the Arduino platform
Autorzy:
Škultéty, E.
Pivarčiová, E.
Karrach, L.
Powiązania:
https://bibliotekanauki.pl/articles/409599.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
temperature
sensor
measurement
Arduino
Opis:
One of the most frequently measured quantity is temperature, which is also one of the most important physical quantities. Temperature has influence on the almost all states and processes in the nature as well as in technique. A wide range of temperature sensors is currently available on the market. They use different measurement principles and exist in many designs. According to the location of the sensing element in the measured environment, they are divided into two main groups: contact and non-contact. Further, we can divide the temperature sensors according to the physical principle on which they work. The article deals with the analysis and comparison of selected Arduino-compatible contact temperature sensors. The temperature measurement of machine functional nodes and its diagnostics are part of maintenance and engineering diagnostics. At present, NC and CNC machine diagnostics are an important trend in machine condition monitoring and machine status prediction to maintain production quality. Machine status monitoring allows reducing of machine service costs as well as maintaining the high production quality.
Źródło:
Management Systems in Production Engineering; 2018, 3 (26); 168-171
2299-0461
Pojawia się w:
Management Systems in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of variation in measurement chain on temperature measurement calibration with resistant temperature sensors
Autorzy:
Deutsch, Jessica
Riedel, Mirko
Müller, Jens
Ihlenfeldt, Steffen
Powiązania:
https://bibliotekanauki.pl/articles/99818.pdf
Data publikacji:
2019
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
temperature measurement
calibration
PRT sensor
Opis:
Temperature is one of the most important key parameter to consider in measurement and mechanical engineering, because every measurement has to be conducted with reference to standard temperature conditions (20°C, ISO 1). Strictly speaking, almost every measurement depends on the accuracy of the temperature measurement, which requires proper calibration. Therefore, standards list detailed criteria to fulfil temperature calibration with high precision. In fact, any calibration is only valid, if the whole measurement chain is taken into account. This would make recalibration necessary with each variation of the components in the measuring set-up (varying cable length, different measurement channel etc.), which is time-consuming or even impossible in practice. For that reason, this paper presents a practicable calibration strategy, which specifies each component individually and later combines the calibration results according to the composition of the measurement chain. This provides a fast and useful way to achieve the required accuracy of temperature measurement. The examined, exemplary measurement chain consists of an industrial platinum resistance thermometer (IPRT), cables with different lengths, an electrical amplifier and a reference temperature calibrator.
Źródło:
Journal of Machine Engineering; 2019, 19, 3; 56-65
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New type of Piezoresistive Pressure Sensors for Environments with Rapidly Changing Temperature
Autorzy:
Tykhan, M.
Ivakhiv, O.
Teslyuk, V.
Powiązania:
https://bibliotekanauki.pl/articles/221026.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pressure
sensor
non-stationary
temperature
Opis:
The theoretical aspects of a new type of piezo-resistive pressure sensors for environments with rapidly changing temperatures are presented. The idea is that the sensor has two identical diaphragms which have different coefficients of linear thermal expansion. Therefore, when measuring pressure in environments with variable temperature, the diaphragms will have different deflection. This difference can be used to make appropriate correction of the sensor output signal and, thus, to increase accuracy of measurement. Since physical principles of sensors operation enable fast correction of the output signal, the sensor can be used in environments with rapidly changing temperature, which is its essential advantage. The paper presents practical implementation of the proposed theoretical aspects and the results of testing the developed sensor.
Źródło:
Metrology and Measurement Systems; 2017, 24, 1; 185-192
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Environmental evaluation with chemical sensors in the Palace Museum of Wilanow
Autorzy:
Pena-Poza, J.
Garcia-Heras, M.
Palomar, T.
Laudy, A.
Modzelewska, E.
Villegas, M.
Powiązania:
https://bibliotekanauki.pl/articles/200179.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
heritage
sensor
acidity
temperature
sol-gel
Wilanów
Opis:
Environmental evaluation arises as an innovative procedure to carry out preventive conservation of Cultural Heritage items. Parameters contributing to the proper conservation of such items can be monitored and assessed. Chemical sensors with optical response synthesised by the sol-gel method are useful for a complete and accurate environmental evaluation. Physical-chemical mechanisms of decay and degradation of materials can be predicted from the sensors response, which will favour the decisions on the adequate procedures to avoid damage. Sol-gel sensors prepared and applied in the present work are reversible, reusable and regenerable. Their optical response provides a change of colour vs. the parameters to which they are sensitive. Both temperature and environmental acidity have been monitored in several selected chambers of the Palace Museum of Wilanów (Warsaw, Poland). The optical response of sensors was recorded by visible spectrophotometry from June 2010 to December 2010. The results inform on the environmental conservation conditions, both indoor and outdoor the Palace. Main innovation of the research carried out concerns the evaluation of the environmental acidity as an essential parameter to be taken into account for the proper conservation that can not be measured by conventional methods.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2011, 59, 3; 247-252
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Discretization Method of Continuous-Time Dynamic Linear Model
Autorzy:
Gryś, Sławomir
Minkina, Waldemar
Powiązania:
https://bibliotekanauki.pl/articles/27311915.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
sensor dynamics
compensation
discrete models
temperature measurement
Opis:
The article presents a new discretization method of a continuous-time linear model of sensor dynamics. It can be useful to reduce measuring errors related to the inertia of the sensor. For example it is important in the measurement of rapid processes as temperature changes in combustion chambers, or for shortening the time needed to establish the sensor readings in a transition state. There is assumed that sensor dynamics can be approximated by linear differential equation or transfer function. The searched coefficients of equivalent difference equation or discrete transfer function are obtained from Taylor expansion of a sensor output signal and then on the solution of the linear set of equations. The method does not require decomposition of sensor transfer function for zeros and poles and can be applied to the case of transfer function with zeros equal to zero. The method was used to compensate the dynamics of sensor measuring fast signals. The Bode characteristics of a compensator were compared with others derived using classical methods of discretization of linear models. Additionally, signals in time were presented to show the dynamic error before and after compensation.
Źródło:
International Journal of Electronics and Telecommunications; 2023, 69, 2; 281--286
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Conditions in exhaust pipe in CI engine in light of monitoring of catalytycal converter
Autorzy:
Rychter, M.
Powiązania:
https://bibliotekanauki.pl/articles/242319.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
catalytic converter
emission
monitor
pressure
sensor
temperature
Opis:
The paper presents main method of monitoring catalytically comerter in CI engines. In this paper presents modified test bedwitch used to testes of exhaust pipe in light of determination possibility of application measurement probę to determine of NOx concentration. Those investigation could help to evaluate of possibility catalytically converter monitoring within the framework on board diagnostic systems The OBD system is an integral part of the vehicle connected with the engine control system, Nowadays the investigation on the on board diagnostic systems in their different applications are one of the basic problems that the OBD method is concerned with. The implementation of the investigation method for the OBD system efficiency is one of the main questions of the matter in hand. Diagram of modification exhaust pipe with installed catalytically converter in test bed and present of measurement points, distribution of temperature in measurement point TO-T8 exhaust pipe of testing engine without catalytically converter during realization ESC test, distribution of temperature in measurement point TO-T8 exhaust pipe of testing engine with 200 cpsi catalytically converter during realization ESC test, distribution of pressure in measurement point pO-p8 exhaust pipe oftesting engine without catalytically converter during realization ESC test, distribution of temperature in measurement point pO-p8 exhaust pipe of testing engine with 200 cpsi catalytically converter during realization ESC test are presented in the paper.
Źródło:
Journal of KONES; 2009, 16, 2; 401-406
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydrogen Detection With a Gas Sensor Array – Processing and Recognition of Dynamic Responses Using Neural Networks
Autorzy:
Gwiżdż, P.
Brudnik, A.
Zakrzewska, K.
Powiązania:
https://bibliotekanauki.pl/articles/221723.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gas sensor
sensor array
temperature modulation
dynamic response
feature extraction
neural networks
Opis:
An array consisting of four commercial gas sensors with target specifications for hydrocarbons, ammonia, alcohol, explosive gases has been constructed and tested. The sensors in the array operate in the dynamic mode upon the temperature modulation from 350°C to 500°C. Changes in the sensor operating temperature lead to distinct resistance responses affected by the gas type, its concentration and the humidity level. The measurements are performed upon various hydrogen (17-3000 ppm), methane (167-3000 ppm) and propane (167-3000 ppm) concentrations at relative humidity levels of 0-75%RH. The measured dynamic response signals are further processed with the Discrete Fourier Transform. Absolute values of the dc component and the first five harmonics of each sensor are analysed by a feed-forward back-propagation neural network. The ultimate aim of this research is to achieve a reliable hydrogen detection despite an interference of the humidity and residual gases.
Źródło:
Metrology and Measurement Systems; 2015, 22, 1; 3-12
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simultaneity Analysis In A Wireless Sensor Network
Autorzy:
Malović, M.
Brajović, L.
Mišković, Z.
Šekara, T.
Powiązania:
https://bibliotekanauki.pl/articles/220479.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
time
frequency
simultaneity
synchronization
temperature
wireless sensor networks
Opis:
An original wireless sensor network for vibration measurements was designed. Its primary purpose is modal analysis of vibrations of large structures. A number of experiments have been performed to evaluate the system, with special emphasis on the influence of different effects on simultaneity of data acquired from remote nodes, which is essential for modal analysis. One of the issues is that quartz crystal oscillators, which provide time reading on the devices, are optimized for use in the room temperature and exhibit significant frequency variations if operated outside the 20–30°C range. Although much research was performed to optimize algorithms of synchronization in wireless networks, the subject of temperature fluctuations was not investigated and discussed in proportion to its significance. This paper describes methods used to evaluate data simultaneity and some algorithms suitable for its improvement in small to intermediate size ad-hoc wireless sensor networks exposed to varying temperatures often present in on-site civil engineering measurements.
Źródło:
Metrology and Measurement Systems; 2015, 22, 2; 275-288
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of Optical Fiber Macrobendings in Temperature Sensor Dedicated for Power Transformer Monitoring
Ocena wprowadzanych makrozgięć na światłowodzie na działanie czujnika temperatury dedykowanego do monitorowania transformatorów
Autorzy:
Guzowski, Bartłomiej
Łakomski, Mateusz
Shatarah, Iyad S. M.
Powiązania:
https://bibliotekanauki.pl/articles/27312472.pdf
Data publikacji:
2023
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
GaAs sensor
temperature
power transformer
optical fiber
monitoring
sensor GaAs
temperatura
transformator
światłowód
monitorowanie
Opis:
Optical fiber sensing techniques are recognized as very promising in diagnostic and condition monitoring of power transformers. According to the IEC standard 60076-2, the winding hot-spot temperature can be designated with the optical fiber sensor. In this paper, the investigation of the influence of macrobending of the optical fiber temperature sensor on the sensing performance is presented. The obtained results prove that the optical fiber sensor wrapped six times around the 14 mm cylinder still provides temperature sensing abilities.
Sensory światłowodowe doskonale sprawdzają się w diagnostyce i monitorowaniu stanu transformatorów. Norma IEC 60076-2:2011 wskazuje na możliwość użycia czujników światłowodowych do pomiaru temperatury uzwojenia transformatora. W niniejszym artykule badany jest wpływ makrozgięć na działanie światłowodowego czujnika temperatury. Uzyskane dane potwierdzają, że czujnik nadal działa prawidłowo, pomimo wprowadzonego makrozgięcia w postaci sześciokrotnego zawinięcia światłowodu wokół cylindra o średnicy 14 mm.
Źródło:
Pomiary Automatyka Robotyka; 2023, 27, 4; 39--44
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On possibility of application of InSb-based high-temperature Hall sensors for ITER magnetic diagnostics
O możliwości zastosowania wysokotemperaturowych czujników Halla opartych o InSb w diagnostyce magnetycznej tokamaka ITER
Autorzy:
Jankowski, J.
El-Ahmar, S.
Oszwaldowski, M.
Prokopowicz, R.
Pytel, K.
Powiązania:
https://bibliotekanauki.pl/articles/159884.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
Tematy:
high-temperature
neutron irradiation
Hall sensor
ITER
magnetic diagnostics
Opis:
We report on irradiation experiments of InSb-based Hall samples at two types of neutron spectrums. One with thermal neutrons (natural neutron spectrum of fission reactor) and second with fast neutrons (filtered spectrum). Fluences in both cases reached almost 1018 cm-2 and that led to significant decreasing of electron mobility of samples. In case of thermal neutrons, transmutation process led to increasing of electron concentration of about 2.3×1018 cm-3. For samples irradiated with fast neutrons, twofold effect was observed: increase in electron concentration for samples with low carrier density and decrease in electron concentration for samples with high carrier density. All results raise important issue, that in case of ITER ex-vessel steady state sensors, research at different spectrum of neutrons are necessary.
W artykule przedstawione zostały wyniki badań nad napromieniowaniem neutronami struktur halotronowych bazujących na antymonku indu (InSb). Część próbek została napromieniowana w strumieniu neutronów termicznych (widmo naturalne neutronów reaktora MARIA w Świerku), a pozostałe próbki w strumieniu neutronów prędkich (widmo filtrowane neutronów reaktora). W obu przypadkach dozy neutronów były zbliżone do poziomu 1018 cm-2, doprowadzając do znacznego spadku ruchliwości elektronów w cienkich warstwach InSb. W przypadku napromieniowania neutronami termicznymi zaobserwowano wzrost koncentracji elektronów o wartość ok. 2,3×1018 cm-3, głównie za sprawą transmutacji In -> Sn. Dla próbek napromieniowanych neutronami prędkimi wystąpiły dwa przeciwne efekty: wzrost koncentracji elektronów dla próbek o niskiej początkowej koncentracji elektronów, oraz spadek koncentracji dla próbek o wysokiej początkowej koncentracji elektronów. Wyniki badań wskazują, że w przypadku zastosowania czujników Halla w tokamaku ITER niezbędne jest przeprowadzenie badań w strumieniach neutronów o różnym widmie energetycznym.
Źródło:
Prace Instytutu Elektrotechniki; 2012, 258; 149-156
0032-6216
Pojawia się w:
Prace Instytutu Elektrotechniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of Fiber-Optic Sensors System, Based on Fiber Bragg Gratings
Autorzy:
Kalizhanova, Aliya
Kunelbayev, Murat
Wojcik, Waldemar
Kozbakova, Ainur
Aitkulov, Zhalau
Malikova, Feruza
Powiązania:
https://bibliotekanauki.pl/articles/2202138.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
fiber Bragg grating
sensor
deformation
temperature
modeling
MATLAB
Simulink
Opis:
An article herein considers the development of a fiber-optic sensor system, based on fiber Bragg gratings. Presently, fiber-optic sensors has become world-widely known amongst sensor technologies, used for monitoring engineering and construction structures. The work is linked with developing the system from fiber-optic sensors on the basis of fiber optic gratings, its characteristics, deformation behavior and temperature, acting at fiber Bragg grating by means of computer modeling. The research is focused at the analysis of characteristics and deformation and temperature behavior of fiber-optic Bragg sensor. Fiber-optic Bragg sensor with tilted grating is used for measuring deformation of the object, the strength of which is changed, dependent on the applied force, as well, for measuring and detecting any temperature deviations, influencing at fiber Bragg grating, which might bring to fire and accidents. In the research, simulation modeling there was made in the MATLAB (Simulink) software.
Źródło:
Journal of Ecological Engineering; 2022, 23, 10; 98--106
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Offset Drift Dependence of Hall Cells with their Designed Geometry
Autorzy:
Paun, M. A.
Sallese, J. M.
Kayal, M.
Powiązania:
https://bibliotekanauki.pl/articles/226531.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
hall effect sensor
individual and residual offset drift
temperature coefficient
Opis:
In this paper, the performance of CMOS Hall Effect Sensors with four different geometries has been experimentally studied. Using a characteristic measurement system, the cells residual offset and its temperature behavior were determined. The offset, offset drift and sensitivity are quantities that were computed to determine the sensors performance. The temperature coefficient of specific parameters such as individual, residua offset and resistance has been also investigated. Therefore the optimum cell to fit the best in the performance specifications was identified. The variety of tested shapes ensures a good analysis on how the sensors performance changes with geometry.
Źródło:
International Journal of Electronics and Telecommunications; 2013, 59, 2; 169-175
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optoelektroniczny przetwornik E/U operujący w 77K
An optoelectronic light to voltage converter operating at 77K
Autorzy:
Pająkowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/152870.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
czujnik optyczny
fotodioda
niskie temperatury
optoelectronic sensor
photodiode
low temperature
Opis:
W pracy przedstawiono wyniki badań zachowania fotodiody BPW34S w temperaturze z zakresu od 77 K do 300 K Przedstawiono zmiany wybranych parametrów wzmacniaczy operacyjnych BiFET w niskiej temperaturze. Zaproponowano rozwiązanie kriogenicznego przetwornika E/U (natężenie oświetlenia/napięcie) pracującego w temperaturze z zakresu od 77 K do 300 K, z użyciem fotodiody BPW34S i wzmacniacza TL081 wykonanego w technologii BiFET. Porównano wyniki badań temperaturowych kriogenicznego przetwornika E/U z wynikami badań nad pracą scalonego czujnika optoelektronicznego OPT101 w temperaturach z zakresu od 77 K do 300 K. Pokazano pracę skonstruowanego przetwornika E/U mogącego operować w 77 K.
The paper presents the results of performance tests of a BPW34S photodiode in the temperature range from 77 K to 300 K (Fig. 2). Also the results of tests of a BiFET operational amplifier are presented: the open loop gain and gain bandwidth of TL081 in the temperature range from 77 K to 300 K (Fig. 4). There is introduced a cryogenic light to voltage converter operating within the above mentioned temperature range. (Fig. 5). In the cryogenic light to voltage converter there are used the BPW34S photodiode and TL081 BiFET operational amplifier. The stand for testing characteristics of electric parameters of electronic elements in low temperatures is shown in the block diagram (Fig. 7) and the photo (Fig. 9). It was proved that the cryogenic light to voltage converter could operate in temperature range 77 K to 300 K with a relative error less than 6% (Tab. 1) (Fig. 8). Finally, the results of low temperature tests of the designed converter with the results of tests of the optoelectronic sensor OPT101 are compared (Fig. 10, 11). There is also presented the spectral sensitivity of the tested light sensors (Fig. 12). The presented solutions can be used in devices working in temperature of 77 K in e.g. high-temperature superconductivity equipment.
Źródło:
Pomiary Automatyka Kontrola; 2014, R. 60, nr 8, 8; 583-586
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wirelessly Powered High-Temperature Strain Measuring Probe Based on Piezoresistive Nanocrystalline Diamond Layers
Autorzy:
Bouřa, A.
Kulha, P.
Husák, M.
Powiązania:
https://bibliotekanauki.pl/articles/220924.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nano-crystalline diamond
strain sensor
high temperature
remote sensing
wireless powering
Opis:
A high-temperature piezo-resistive nano-crystalline diamond strain sensor and wireless powering are presented in this paper. High-temperature sensors and electronic devices are required in harsh environments where the use of conventional electronic circuits is impractical or impossible. Piezo-resistive sensors based on nano-crystalline diamond layers were successfully designed, fabricated and tested. The fabricated sensors are able to operate at temperatures of up to 250°C with a reasonable sensitivity. The basic principles and applicability of wireless powering using the near magnetic field are also presented. The system is intended mainly for circuits demanding energy consumption, such as resistive sensors or devices that consist of discrete components. The paper is focused on the practical aspect and implementation of the wireless powering. The presented equations enable to fit the frequency to the optimal range and to maximize the energy and voltage transfer with respect to the coils’ properties, expected load and given geometry. The developed system uses both high-temperature active devices based on CMOS-SOI technology and strain sensors which can be wirelessly powered from a distance of up to several centimetres with the power consumption reaching hundreds of milliwatts at 200°C. The theoretical calculations are based on the general circuit theory and were performed in the software package Maple. The results were simulated in the Spice software and verified on a real sample of the measuring probe.
Źródło:
Metrology and Measurement Systems; 2016, 23, 3; 437-449
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Soft Sensing Method Of LS-SVM Using Temperature Time Series For Gas Flow Measurements
Autorzy:
Xu, W.
Fan, Z.
Cai, M.
Shi, Y.
Tong, X.
Sun, J.
Powiązania:
https://bibliotekanauki.pl/articles/221824.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gas flow
soft sensor
support vector machine (SVM)
temperature time series
Opis:
This paper proposes a soft sensing method of least squares support vector machine (LS-SVM) using temperature time series for gas flow measurements. A heater unit has been installed on the external wall of a pipeline to generate heat pulses. Dynamic temperature signals have been collected upstream of the heater unit. The temperature time series are the main secondary variables of soft sensing technique for estimating the flow rate. A LS-SVM model is proposed to construct a non-linear relation between the flow rate and temperature time series. To select its inputs, parameters of the measurement system are divided into three categories: blind, invalid and secondary variables. Then the kernel function parameters are optimized to improve estimation accuracy. The experiments have been conducted both in the single-pulse and multiple-pulse heating modes. The results show that estimations are acceptable.
Źródło:
Metrology and Measurement Systems; 2015, 22, 3; 383-392
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis, evaluation, and optimization of bio-medical thermo-resistive micro-calorimetric flow sensor using an analytical approach
Autorzy:
Babaelahi, Mojtaba
Sadri, Somayyeh
Powiązania:
https://bibliotekanauki.pl/articles/2051855.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermo-resistive
micro-calorimetric
sensor
temperature
variable conductivity
analytical solution
optimization
Opis:
Sensitive MEMS-based thermal flow sensors are the best choice for monitoring the patient’s respiration prompt diagnosis of breath disturbances. In this paper, open space micro-calorimetric flow sensors are investigated as precise monitoring tools. The differential energy balance equation, including convection and conduction terms, is derived for thermal analysis of the considered sensor. The temperature-dependent thermal conductivity of the thin silicon-oxide membrane layer is considered in the energy balance equation. The derived thermal non-linear differential equation is solved using a well-known analytical method, and a finite-element numerical solution is used for the confirmation. Results show that the presented analytical model offers a precise tool for evaluating these sensors. The effects of flow and thin membrane film parameters on thermo-resistive micro-calorimetric flow sensors’ performance and sensitivity are evaluated. The optimization has been performed at different flow velocities using a genetic algorithm method to determine the optimum configuration of the considered flow sensor. The geometrical parameters are selected as a decision variable in the optimization procedure. In the final step, using optimization results and curve-fitting, the expressions for the optimum decision variables have been derived. The sensor’s optimum configuration is achieved analytically based on flow velocity with the analytical terms for optimum decision variables.
Źródło:
Metrology and Measurement Systems; 2022, 29, 1; 109-125
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Challenges in Integrating Wireless Sensor Network and Internet of Things for Environmental Monitoring
Autorzy:
Vijayalakshmi, S. R.
Muruganand, S.
Powiązania:
https://bibliotekanauki.pl/articles/1193537.pdf
Data publikacji:
2016
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Environmental monitoring
Internet of Things
Temperature and humidity measurement
Wireless Sensor Network
Opis:
Hardware technology developments and wireless communications enables the development of wireless sensor networks (WSNs). WSN will need to be connected to the Internet due to its variety of applications and their importance. This paper discusses the challenges in integrating WSN and IoT (Internet of Things). The best ways of integrating WSN and IoT for environmental monitoring are analyzed. The sensor node is developed to monitor environmental parameters such as temperature and humidity. The sensor SHT75 to sense the temperature and humidity of the environment, XBeePro to communicate with gateway, LCD to display information are interfaced with MSP430 Microcontroller. The microcontroller is used for processing, controlling and communicating the information. The sensor nodes are deployed to measure the parameter in the target area. The information is communicated to the world of Internet in one of the best integrating ways discussed in the paper.
Źródło:
World Scientific News; 2016, 41; 1-8
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sterowanie oraz wizualizacja procesem technologicznym w obiektach szklarniowych
Control and visualisation of technological process in greenhouse facilities
Autorzy:
Rutkowski, K.
Grodny, K.
Powiązania:
https://bibliotekanauki.pl/articles/289290.pdf
Data publikacji:
2010
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
szklarnia
czujnik
temperatura
system grzewczy
sterowanie
greenhouse
sensor
temperature
heating system
control
Opis:
Przedmiotem pracy była analiza nowo wdrożonego systemu sterowania i wizualizacji w obiekcie szklarniowym o powierzchni 0,5 ha. W opisywanym obiekcie system sterowania oparty jest na sterownikach PLC firmy Siemens S-5 oraz S-7 (ang. Programmable Logic Controller). Każdy ze sterowników wyposażony jest w układy wejściowe i wyjściowe do podłączania standardowych, fizycznych sygnałów automatyki. Przejrzysta i ergonomiczna wizualizacja połączona z możliwością wprowadzania zmian w pracy urządzeń wykonawczych z poziomu operatorskiego oraz zdalne sterowanie poprzez łącza internetowe procesem produkcji jest obecnie jednym z elementów nowoczesnego zarządzania, opartego na optymalizacji kosztowej procesu.
The subject of the work was to analyse the newly implemented control and visualization system in a greenhouse facility with total area of 0.5 ha. In the described facility control system is based on controllers manufactured by Siemens: S-5 and S-7 (Programmable Logic Controllers). Each of them is equipped with input and output systems allowing to connect standard, physical signals from automatics. Clear and ergonomic visualisation combined with capacity to introduce modifications in operation of executive equipment from operator's level, and remote control over production process via Internet links is currently one of elements of modern management based on cost optimization for the process.
Źródło:
Inżynieria Rolnicza; 2010, R. 14, nr 3, 3; 171-176
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phase response of polarization-maintaining optical fiber to temperature changes
Autorzy:
Kyselak, M.
Dvorak, F.
Maschke, J.
Vlcek, C.
Powiązania:
https://bibliotekanauki.pl/articles/173787.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fiber sensor
polarization maintaining
optical fiber
observable Poincare sphere
birefringence
temperature field disturbance
Opis:
This paper deals with the phase shift development in the polarization-maintaining fiber owing to different temperatures of an applied defined body, where both polarization axes are excited. A variation of the Stokes parameters induced by the phase shift is expressed by the Jones matrix and a depiction on the observable Poincaré sphere. The temperature response of polarization-maintaining fiber and the effects of heat transfer on the phase shift variation of polarization-maintaining fiber were described theoretically. The time dependence of the phase shift development and its direction of rotation on the observable Poincaré sphere was measured and presented graphically. In addition, different response measures for higher and lower temperatures compared with the ambient temperature were experimentally evaluated.
Źródło:
Optica Applicata; 2017, 47, 4; 635-649
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Gas temperature meter
Autorzy:
Zashchepkina, N. M.
Svyta, M. P.
Powiązania:
https://bibliotekanauki.pl/articles/2105505.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
meter
temperature
PT100
thermal converter
sensor
probe
miernik
temperatura
przetwornik termiczny
czujnik
sonda
Opis:
Purpose: of the article is to develop a digital portable gas temperature meter in the range of -50…+600°C. To measure the temperature of dusty gas flows in the air pollution sources with the least significant digit of the digital device 1°C. Design/methodology/approach: The microprocessor measuring unit, probe and software is proposed. It leads to build a high-precision temperature meter based on a thin film sensor HM220 type "pt100". Findings: The calculation of the electrical schematic diagram parameters for signal conditioning of the sensor relative to the input range of the analog-to-digital converter. The experimental measuring unit and the probe of the gas temperature meter are assembled. The principle of the gas temperature meter calibration with the help of a precision resistance box MSR-60M is considered. The experimental gas temperature meter has a total standard uncertainty determined by type B for a maximum value of the measurement range of 1.94°C. The error of the sensor "pt100" makes the largest contribution to the total standard uncertainty, so the error increases in proportion to the value of the measured temperature. Research limitations/implications: On the basis of the proposed design of gas temperature meter it is possible to construct devices with various lengths of probes. Practical implications: The proposed meter is designed for environmental laboratories that measure the velocity, flow and sampling of dust and gas emissions from sources of air pollution. Originality/value: The device design differs due to the use of thermostable wire made of constantan as extending conductors of the temperature sensor, which is included in the unbalanced Wheatstone bridge. This solution allows the use of unipolar power supply 3.3 V for both analog and digital part of the meter. Temperature meter based on a thin film resistance thermometer is characterized by relative ease of manufacture, low material consumption, cost and high reliability.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2022, 111, 1; 33--41
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research of parameters of fiber-optical measuring systems
Badanie parametrów światłowodowych systemów pomiarowych
Autorzy:
Wójcik, Waldemar
Kalizhanova, Aliya
Kashaganova, Gulzhan
Kozbakova, Ainur
Aitkulov, Zhalau
Orazbekov, Zhassulan
Powiązania:
https://bibliotekanauki.pl/articles/407660.pdf
Data publikacji:
2019
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
Bragg grating
optical sensor
temperature
mathematical model
siatka Bragga
czujnik optyczny
temperatura
model matematyczny
Opis:
At present there exist a lot of technical devices, the failure of which can be connected not only with huge financial losses, but with the treat to the environment as well. Therefore, an important problem is the effective devices conditions diagnostics, including electronic components and check of their operation. Timely faults detecting allows introducing the prevention measures and avoiding serious consequences. Fiber-optic sensors have several advantages, more important of which include the immunity to electromagnetic disturbances, little weight and possibility to be included into the structure being measured. The most perspective are the sensors based on the Bragg fiber gratings. Bragg fiber gratings have several advantages, for instance, they allow creating the distributed measuring massifs, which contain several sensors. As well, they are insensitive to the optic power source vibrations. Variety of using the fiber sensors based on the Bragg fiber gratings has led to producing the Bragg fiber gratings with different spectral characteristics. Homogeneous Bragg fiber gratings have the spectra with solid side lobes, which can influence at the temperature sensor processing characteristics. To level the side lobes there is applied the apodization method, which is one of the means to affect the spectral form. The article herein considers the issues of the Bragg fiber gratings mathematical and computer modeling using the transfer matrix method. Transfer matrix method allows defining the optical components spectral characteristics based on the bound modes theory and description of electromagnetic wave, passing through an optic fiber. In the article there have been analyzed the Bragg fiber gratings in compliance with spectral features, such as transmission and reflectance spectra. As well, there has been carried out the experiment with influence of various parameters at the Bragg fiber gratings spectral characteristics. There have been studied the Bragg fiber gratings spectral features and selected the grating optimal parameters for designing the fiber-optic sensors based on the Bragg fiber gratings.
Obecnie istnieje wiele urządzeń technicznych, których awarię można powiązać nie tylko z ogromnymi stratami finansowymi, ale także z troską o środowisko. Dlatego ważnym problemem jest skuteczna diagnostyka warunków pracy urządzeń, w tym elementów elektronicznych i kontrola ich działania. Wykrywanie błędów w odpowiednim czasie umożliwia wprowadzenie środków zapobiegawczych i uniknięcie poważnych konsekwencji. Czujniki światłowodowe mają kilka zalet, z których ważniejsze to odporność na zakłócenia elektromagnetyczne, niewielka waga i możliwość włączenia do mierzonej struktury. Najbardziej perspektywiczne są czujniki oparte na siatkach Bragga (FBG). Optyczne siatki Bragga mają kilka zalet, na przykład umożliwiają tworzenie rozproszonych układów pomiarowych, które zawierają kilka czujników. Są również niewrażliwe na wibracje źródła zasilania optycznego. Różnorodność wykorzystania czujników światłowodowych opartych na siatkach Bragga doprowadziła do wytworzenia siatek Bragga o różnych charakterystykach spektralnych. Jednorodne, optyczne siatki Bragga mają widma z pełnymi płatkami bocznymi, które mogą wpływać na charakterystykę przetwarzania czujnika temperatury. Aby wyrównać płatki boczne, stosuje się metodę apodyzacji, która jest jednym ze sposobów wpływania na formę widmową. W niniejszym artykule omówiono zagadnienia światłowodowych siatek Bragga, modelowania matematycznego i komputerowego z wykorzystaniem metody macierzy transferu. Metoda macierzy transferu pozwala na określenie charakterystyki widmowej składników optycznych w oparciu o teorię modów wiązanych i opis fali elektromagnetycznej, przechodzącej przez światłowód. W artykule przeanalizowano siatki Bragga zgodnie z cechami widmowymi, takimi jak widma transmisji i odbicia. Przeprowadzono również eksperyment z wpływem różnych parametrów na charakterystyki widmowe siatek Bragga. Zbadano cechy widmowe siatek Bragga i wybrano optymalne parametry siatki do projektowania czujników światłowodowych opartych na siatkach Bragga.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2019, 9, 2; 28-31
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Distributed temperature sensing in optical fibers based on Raman scattering: theory and applications
Autorzy:
Shatarah, I. S. M.
Olbrycht, R.
Powiązania:
https://bibliotekanauki.pl/articles/114537.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
Distributed Temperature Sensing (DTS)
Optical Time Domain Reflectometry (OTDR)
spontaneous Raman scattering
distributed fiber sensor
Opis:
Distributed temperature sensing (DTS) based on Raman scattering in optical fibers gains more importance in several applications, due to its accuracy, immunity to electromagnetic interference and corrosion, durability, low cost and availability. DTS systems are configured differently depending on the environment of application, and uses Optical Time Domain Reflectometry (OTDR) or Optical Frequency Domain Reflectometry (OFDR) for data analyzes. This study features a theoretical background and an introduction to DTS systems’ configurations and applications.
Źródło:
Measurement Automation Monitoring; 2017, 63, 2; 41-44
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sensitivity and dynamic phase response to thermal radiation of a polarization-maintaining fiber
Autorzy:
Kyselak, M.
Dvorak, F.
Maschke, J.
Vlcek, C.
Powiązania:
https://bibliotekanauki.pl/articles/173541.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fiber sensor
polarization-maintaining fiber
PMF
optical fiber
birefringence
temperature field disturbance
approximation equations
approximation parameters
Opis:
This paper deals with the phase shift development between two polarization modes in birefringent fiber, caused by body heat transfer of different temperatures. The aim is to analyze sensitivity and dynamic behaviors, which are significant when optical fiber is used as a sensor of temperature field disturbance. The analysis is based on the values measured during thermal exposure of a section of type PANDA birefringent optical fiber to heat emitted by an exposure body of chosen temperature, placed at a defined distance. The effect of heat transfer through conduction and convection is suppressed by shielding with plastic wraps. The analyzed results, the Stokes parameters and subsequent phase shift, are measured by the polarimeter. The paper follows up on previously published measurement results.
Źródło:
Optica Applicata; 2018, 48, 2; 249-261
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal analysis of pavement for the east Bielsko-Biala bypass
Autorzy:
Loga, W.
Maczyński, A.
Brzozowski, K.
Ryguła, A.
Powiązania:
https://bibliotekanauki.pl/articles/393593.pdf
Data publikacji:
2019
Wydawca:
Polskie Stowarzyszenie Telematyki Transportu
Tematy:
mobile road sensor
road surface temperature
traffic safety
mobilny czujnik drogowy
temperatura powierzchni drogi
bezpieczeństwo ruchu
Opis:
Road surface temperature and road longitudinal temperature gradient value, may present a considerable challenge in the matter of traffic safety. The awareness of thermal conditions with due regard to location of significant temperature variability areas could be desirable information for road infrastructure operators. That knowledge would allow to select an appropriate location of traffic signs, variable message signs and road weather stations. In the wintertime it would enable road maintenance authorities to take more efficient actions. In the study authors present road surface temperature variability analysis based on measurements conducted on a 6.25-kilometer section of eastern bypass of Bielsko-Biala city. In analysis authors used the data from mobile road weather sensor. The sensor enables to measure road surface and dew point temperature, water film height and calculated friction.
Źródło:
Archives of Transport System Telematics; 2019, 12, 3; 8-14
1899-8208
Pojawia się w:
Archives of Transport System Telematics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of high efficiency engines and hybrids on exhaust systems
Autorzy:
Weber, M.
Powiązania:
https://bibliotekanauki.pl/articles/133204.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
high efficiency engines
low exhaust temperature
NH3 sensor
low backpressure DPF
silnik o wysokiej wydajności
niska temperatura spalin
Opis:
Increased efficiency of the combustion process itself and low losses in the Engine, lead to lower temperatures in the exhaust line. Combined with the exhaust gas energy recovery as well as the hybridization of the drivetrain, this temperature decrease will require additional efforts for the exhaust gas aftertreatment in future. Current technologies like SCR with urea could only be used in future with additional heating elements or will need to change to different catalysts or gaseous Ammonia, to keep the current efficiency and conversion rates. Catalyst and filter elements with ultra-low backpressure creating additional new challenges for the correct and robust diagnostics of these aftertreatment components and all emission relevant parts and thresholds. New technologies are needed like the direct measurement of the DPF soot loading with radio frequencies or NH3 sensors to precisely control the ammonia slip for high conversion rates of SCR catalysts.
Źródło:
Combustion Engines; 2017, 56, 4; 207-210
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bezprzewodowy pomiar ciśnienia i temperatury powietrza w kole samochodowym
Wireless measurement of pressure and temperature of air inside the car wheel
Autorzy:
Gryś, S.
Tkacz, M.
Gancarczyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/268847.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
technika samochodowa
czujnik ciśnienia i temperatury
adiustacja dwupunktowa
procesor stm32
automotive
driving safety
sensor of the pressure and temperature TPMS
Opis:
Publikacja ma charakter dydaktycznopopularyzatorski z zakresu nauczania metrologii, w szczególności systemów pomiarowych. W artykule przedstawiono problematykę bezprzewodowego bezpośredniego pomiaru ciśnienia oraz temperatury powietrza w kole samochodowym. Zostało stworzone stanowisko laboratoryjne pozwalające na zapoznanie się z metodą pomiaru oraz elementami systemu TPMS (ang. Tire Pressure Measurement System), jednego z nowoczesnych systemów bezpieczeństwa stosowanych w branży motoryzacyjnej. W artykule opisano konstrukcję oraz zasadę działania poszczególnych elementów stanowiska, budowę zintegrowanego czujnika, sposób komunikacji z modułem odbiorczym TPMS. Ponadto, przedstawiono obsługę stanowiska, sposób przeprowadzenia pomiarów, metodę adiustacji wskazań czujników z wykorzystaniem przyrządów kontrolnych.
The paper is focused on the issue of teaching metrology. It presents the method of wireless measurement of pressure and temperature of air in a car wheel. For the cognitive and learning purposes it was created an experimental setup to get familiar with the measuring method and elements of Tire Pressure Measurement System. TPMS is one of the modern safety systems used in the automotive industry. Paper describes the construction and operating principle of key elements of setup, i.e. object, integrated sensors, TPMS system, control instruments, the format of data frame transferred between TPMS and computer, CRC codes. Furthermore, there were presented the basic features of two software tools working with Windows based PC computer or embedded system. There was discussed a proposal of carrying out the measurements in simulated conditions with ability to change pressure and also temperature of air inside the wheel using inner heaters. The software for embedded system let to observe raw sensors' readings and additionally adjusted based on a two-point measurements involving control instruments. The adjusting routine was illustrated with an example for better clarity.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2016, 49; 25-32
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies