Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "model error" wg kryterium: Temat


Wyświetlanie 1-96 z 96
Tytuł:
A new predictive filter for nonlinear alignment model of stationary MEMS inertial sensors
Autorzy:
Alhassan, Hassan Majed
Ghahremani, Nemat Allah
Powiązania:
https://bibliotekanauki.pl/articles/2052163.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
predictive filter
nonlinear alignment
model error
optimization
MEMS inertial sensors
Opis:
This paper proposes a new approach called the Predictive Kalman Filter (PKF) which predicts and compensates model errors of inertial sensors to improve the accuracy of static alignment without the use of external assistance. The uncertain model error is the main problem in the field as the Micro Electro Mechanical System (MEMS) inertial sensors have bias which change over time, and these errors are not all observable. The proposed filter determines an optimal equivalent model error by minimizing a quadratic penalty function without augmenting the system state space. The optimization procedure enables the filter to decrease both model uncertainty and external disturbances. The paper first presents the complete formulation of the proposed filter. Then, a nonlinear alignment model with a large misalignment angle is considered. Experimental results demonstrate that the new method improves the accuracy and rapidness of the alignment process as the convergence time is reduced from 550 s to 50 s, and the azimuth misalignment angle correctness is decreased from 52′′ ± 47′′ to 4′′ ± 0.02′′.
Źródło:
Metrology and Measurement Systems; 2021, 28, 4; 673-691
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Probabilistyczny model wyniku pomiaru wartości chwilowej wielkości zmiennej w czasie
Probabilistic model of instantaneous value measurement result of varying in time quantity
Autorzy:
Jakubiec, J.
Powiązania:
https://bibliotekanauki.pl/articles/156154.pdf
Data publikacji:
2005
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
sampling
quantizing
probabilistic error model
uncertainty
Opis:
W artykule rozpatrywane jest zagadnienie pomiaru wartości chwilowej wielkości zmieniającej się w czasie za pomocą toru pomiarowego składającego się z układu próbkująco/pamietającego oraz przetwornika A/C. Opisano sposób modelowania właściwości metrologicznych elementów toru oraz probabilistyczny model wyniku pomiaru uzyskiwanego na jego wyjściu. Przedstawiono metodę weryfikacji tego rodzaju modelu dla przypadku, gdy obejmuje on wiele źródeł błędu.
The paper characterizes the problem of instantaneous value measurement of a quantity varying in time by using a measuring chain consists of a Sample/Hold circuit and an AD converter. A method of metrological properties modeling of the chain elements and a model of measurement result obtained at the output of the chain has been presented. A verification method of such a kind model, for the situation when it contains many error sources, has been described.
Źródło:
Pomiary Automatyka Kontrola; 2005, R. 51, nr 2, 2; 28-31
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Variable antennas positions solution to reduce pointing errors due to wind speed and temperature coupled effects during free space optical link using matrix Rician pointing error model
Autorzy:
Teuma Mbezi, Michel
Eke, Samuel
Som, Idelette Hermine Judith
Mouangue, Ruben Martin
Powiązania:
https://bibliotekanauki.pl/articles/27310098.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
atmospheric turbulence
pointing error
free space optical transmission
Rician pointing error model
Opis:
Pointing errors (PE) during free space optical (FSO) transmission can be caused by laser beam wander due to thermal and wind dynamic instability. The aim of this work is to study the coupled effects of temperature and wind speed on PE using matrix Rician pointing error (MRPE) model; then show how variable antennas height can reduce PE due to wind speed and temperature coupled effects. To achieve this purposes, average PE expression was established using MRPE model. Then considering a Gaussian beam wave and Monin–Obukhov similarity functions for the structure parameters of temperature, explicit relationship was established between average PE, temperature and wind speed. It comes out of this study that under dynamic turbulence, one can appropriately modify temperature to reduce PE due to dynamic instability and reciprocally. Depending on turbulence large cells or frozen turbulence eddies distribution, PE can be reduced by appropriately modified antennas height or the distance between transmitter and receiver. That is why this work suggests to install variable or dynamic antennas (rather than fixed ones) which could intelligently modify its positions according to laser beam wander created by atmospheric turbulence.
Źródło:
Optica Applicata; 2023, 53, 3; 393--406
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of climate variability on yield of maize and yam in Cross River State, Nigeria: An autoregressive distributed lag bound approach
Autorzy:
Edet, E. O.
Udoe, P. O.
Isong, I. A.
Abang, S. O.
Ovbiroro, F. O.
Powiązania:
https://bibliotekanauki.pl/articles/1031443.pdf
Data publikacji:
2021
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Sustainable development
error correction model
food security
yield
Opis:
The study examined the impact of climate variability on yield of maize and yam in Cross River State, Nigeria. The specific objectives of the study were to determine the long-run and short-run impact of climate variability factors on yields of maize and yam. Data were sourced from the Nigerian Meteorological Agency (NiMeT) and Cross River State Ministry of Agriculture spanning from 1990-2016. Data obtained were analyzed using inferential statistics. Precisely, the model was estimated by the Ordinary Least Squares (OLS) multiple regression technique, which is within the Autoregressive Distributed Lag Bound approach and error correction testing framework. Both model-1 (maize yield) and model-2 (yam yield) passed through the conditions of the diagnostics and stability test. The study revealed that climate variables had a significant impact on maize yield both in the long and short-run. Based on the findings, it was concluded that proactive measures should be put in place to aid crop farmers adapt to the prevailing and looming threats of climate variability for the purpose of attaining the State’s food security balance sheet. To sustain this drive, an institutional and infrastructural support system is advocated in order to meet one of the goals of sustainable development agenda of the United Nations. Policy recommendations on how to cushion the impact of climate variability on the prescribed crops have been appropriately cited.
Źródło:
World News of Natural Sciences; 2021, 36; 60-74
2543-5426
Pojawia się w:
World News of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of money supply on inflation in Nigeria
Autorzy:
Amassoma, Ditimi
Sunday, Keji
Onyedikachi, Emma-Ebere
Powiązania:
https://bibliotekanauki.pl/articles/522429.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Ekonomiczny w Katowicach
Tematy:
Central Bank of Nigeria
Error correction model
Granger causality
Opis:
Aim/purpose – The aim of this study is to empirically investigate the influence of money supply on inflation in Nigeria. The study was borne out of the curiosity to reexamine the immediate cause of the alarming rate of inflation in Nigeria which is adversely affecting the general welfare of Nigerian populace. Design/methodology/approach – The study employed co-integration test and error correction approach on annual time series data spanning from 1970 to 2016 to ascertain both the long run and short run dynamics relationship among the variables under consideration. Findings – The results showed that money supply does not considerably influence inflation both in the long and short run possibly because the country is in recession. The error correction model has the correct sign of negative and it is significant meaning that about 21% of the errors are corrected yearly. The Granger causality outcome demonstrates that, there is no causality between money supply and inflation in Nigeria within the study period and vice-versa. Research implications/limitations – The implication of this is often that there are different economic conditions which are key determinant of inflation in Nigeria. The study recommends that the government should diversify the economy, minimise importation by encouraging local production of products and services. The Central Bank of Nigeria should guarantee an exchange rate policy that is essentially determined by the state of the economy and not by speculators being a net importation economy. Also, the Central Bank of Nigeria should look inwards into the current interest rate and see how it can be regulated in such a way that will encourage private and foreign investors to be able to invest in the country. This in turn, successively increases income, infrastructure development and economic growth at large. Originality/value/contribution – This paper has been able to confirm that money supply is not a key factor that trigger up inflation in Nigeria.
Źródło:
Journal of Economics and Management; 2018, 31; 5-23
1732-1948
Pojawia się w:
Journal of Economics and Management
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determinants of trade balance in Polish and Czech manufacturing sectors
Autorzy:
Olczyk, Magdalena
Kordalska, Aleksandra
Powiązania:
https://bibliotekanauki.pl/articles/22446541.pdf
Data publikacji:
2018
Wydawca:
Instytut Badań Gospodarczych
Tematy:
CEE economies
trade balance
international competitiveness
manufacturing
error correction model
Opis:
Research background: A strong industrial base is essential for achieving long-term sustainable economic growth and export competitiveness. In that sense, manufacturing remains a significant contributor to exports in the CEE countries. How-ever, its role and its influence vary between CEE economies and change over time. Purpose of the article: The main objective of this paper is to compare the determinants of the international competitiveness, measured by the net exports of the manufacturing sectors in the Czech and Polish economies, by using the database of 13 manufacturing sub-sectors in 1995-2011. The authors research the question of how much foreign and domestic demand, the level of labour costs, the level of sector innovation intensity, the level of sector openness to foreign markets as well as sectoral labour productivity influence the changes in trade balance. Methods: Our approach is based on employing an error correction model and SUR model to disaggregated sectoral manufacturing data. Findings & Value added: The results of the analysis conducted show substantial differences in the roles particular variables play in explaining the net exports in individual sectors. For the majority of Polish and Czech manufacturing sub-sectors, generation of positive trade balance is determined by relative demand growth. An increasing labour productivity influences heavily a positive trade balance of Polish goods in majority of sub-sectors, however, a key factor in Czech sub-sectors is decreasing unit labour costs. The results of the analysis indicate mostly a greater impact of the researched factors on net exports in long rather than short term and the better capacity of the Czech economy to correct deviations from the equilibrium.
Źródło:
Equilibrium. Quarterly Journal of Economics and Economic Policy; 2018, 13, 3; 445-466
1689-765X
2353-3293
Pojawia się w:
Equilibrium. Quarterly Journal of Economics and Economic Policy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reaction of the interest rates in Poland to the interest rates changes in the USA and euro zone
Autorzy:
Przekota, Grzegorz
Waściński, Tadeusz
Sobczak, Lidia
Powiązania:
https://bibliotekanauki.pl/articles/453096.pdf
Data publikacji:
2011
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Katedra Ekonometrii i Statystyki
Tematy:
interest rates
world markets
cointegration analysis
Error Correction Model (ECM)
Opis:
Behavior of interest rates is of key importance for understanding the functioning of an open economy. The simplest models usually assume equal interest rates in individual countries, while the international arbitrage serves as a mechanism of their equalization. In our study an attempt has been made to determine whether and to what extend the interest rates in the Polish market are linked to the USA and the euro zone exchange rates. The analyses have been carried out for rates of different maturity terms, using the integration and co-integration concept.The analyses indicate that differences between the Polish interest rates, and those in the USA and the euro zone have strongly diminished. Cointegration analyses show the existence of a long-term linkages between the domestic and foreign interest rates, in particular with those in the euro zone. The nature of co-integrating relationships was different in the period 2001-2004 as compared with that after 2004, when we see a stronger impact of the euro zone rates than those of the USA. It may be assumed that the Polish accession to the EU had certain influence in the change of the above mentioned relationships.
Źródło:
Metody Ilościowe w Badaniach Ekonomicznych; 2011, 12, 1; 125-134
2082-792X
Pojawia się w:
Metody Ilościowe w Badaniach Ekonomicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Slowdown or Recession? Forecasts Based on Composite Leading Indicator
Autorzy:
Klúcik, Miroslav
Juriová, Jana
Powiązania:
https://bibliotekanauki.pl/articles/483289.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Global economic crisis
recession
composite leading indicator
ARIMAX model
error correction model
Opis:
The economy of Slovakia experienced a turning point in the 1st half of 2008 and entered a phase of decline. The negative impacts of the global economic crisis became evident in the 2nd half of 2008 and led into a recession in the 1st quarter of 2009. The composite leading indicator was originally intended for forecasting of business cycle turning points between the decline and growth phases. The aim of this paper is to transform the qualitative information from composite leading indicator into quantitative forecast and verify whether the beginning of recession in Slovakia could have been identified in advance. The ARIMAX and error correction models are used for the composite reference series and GDP forecasts respectively. The final result shows that the composite leading indicator is useful not only for identifying turning points, but also for the prediction of recession phase.
Źródło:
Central European Journal of Economic Modelling and Econometrics; 2010, 2, 1; 17-36
2080-0886
2080-119X
Pojawia się w:
Central European Journal of Economic Modelling and Econometrics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza powiązań między indeksami giełdy francuskiej, holenderskiej i belgijskiej z wykorzystaniem modelu korekty błędem
Analysis of links between french, dutch and belgian stock market with the use of error correction model
Autorzy:
Prenzena, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/593010.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Ekonomiczny w Katowicach
Tematy:
Indeksy Giełdowe
Kointegracja
Model Korekty Błędem
Cointegration
Error correction model
Stock indices
Opis:
Celem artykułu jest ocena stopnia powiązań między indeksami CAC40, AEX i BEL20 oraz odpowiedź na pytanie, w jakim stopniu sytuacja na danym rynku wpływa na rozwój zdarzeń na rynku z nim powiązanym. W badaniu wykorzystano model korekty błędem, który dostarcza informacji zarówno o zależnościach krótkookresowych między analizowanymi zmiennymi, jak i równowadze długookresowej. W części teoretycznej artykułu przedstawiono podstawowe założenia teorii kointegracji, a także wybrane testy pierwiastków jednostkowych oraz stacjonarności. Wyniki analizy empirycznej potwierdziły, że pomiędzy rozpatrywanymi parami indeksów giełdowych występują istotne zależności oraz istnieje mechanizm powracania do stanu długookresowej równowagi.
The article presents assessment of links between stock indices CAC40, AEX and BEL20 with the use of cointegration analysis and error correction model. This model enables us to capture in one equation short-term dynamics and long-term equilibrium. Research results confirmed, that time series representing examined stock indices are integrated in the same order and residuals from cointegration equations of all models are stationary. This fact enabled us to build error correction model for specific pairs of stock indices. Long-term equilibrium reversion mechanism was observed in all models and the strongest dependence appeared between BEL20 and AEX index.
Źródło:
Studia Ekonomiczne; 2016, 289; 109-126
2083-8611
Pojawia się w:
Studia Ekonomiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ światowych cen ropy naftowej na ceny w Polsce
World oil price impact on prices in Poland
Autorzy:
Baranowski, Paweł
Sztaudynger, Jan Jacek
Powiązania:
https://bibliotekanauki.pl/articles/424758.pdf
Data publikacji:
2014
Wydawca:
Wydawnictwo Uniwersytetu Ekonomicznego we Wrocławiu
Tematy:
oil price
producer price
consumer price
Vector Error Correction Model
Opis:
The world oil price is an exogenous as well as key component and factor influencing domestic prices (especially transportation). The question is: how the oil price influences producer and consumer prices. We focus on a short- and long-term relationship between the domestic prices and oil price (expressed in Polish zloty). We use Vector Error Correction Models, with cost-based specification, i.e. including additionally wages and euro-zloty exchange rate. The degree of estimated long-term pass-through oil prices to producer and consumer prices is 0,15 and 0,05, respectively. Both producer and consumer prices have comparable size of short-term reaction to an oil price shock, but the producer price reaction is more prolonged.
Źródło:
Econometrics. Ekonometria. Advances in Applied Data Analytics; 2014, 2(44); 9-16
1507-3866
Pojawia się w:
Econometrics. Ekonometria. Advances in Applied Data Analytics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Crude Oil Price and Speculative Activity: A Cointegration Analysis
Autorzy:
Socha, Robert
Wdowiński, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/2076245.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
crude oil price
speculation
futures
cointegration
vector error correction model
Opis:
The aim of the study is to discuss the relationship of the crude oil price, speculative activity and fundamental factors. An empirical study was conducted with a VEC model. Two cointegrating vectors were identified. The first vector represents the speculative activity. We argue that the number of short noncommercial positions increases with the crude oil stock and price, decreases with the higher number of long non-commercial positions. A positive trend of crude oil prices may be a signal for traders outside the industry to invest in the oil market, especially as access to information could be limited for them. The second vector represents the crude oil price under the fundamental approach. The results support the hypothesis that the crude oil price is dependent on futures trading. The higher is a number of commercial long positions, the greater is the pressure on crude oil price to increase.
Źródło:
Central European Journal of Economic Modelling and Econometrics; 2018, 3; 263-304
2080-0886
2080-119X
Pojawia się w:
Central European Journal of Economic Modelling and Econometrics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of budget deficits and macroeconomic fundamentals: A VAR-VECM approach
Autorzy:
Epaphra, Manamba
Powiązania:
https://bibliotekanauki.pl/articles/522020.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Ekonomiczny w Katowicach
Tematy:
Budget deficit
Macroeconomic variables
Vector Autoregression
Vector Error-Correction Model
Opis:
Aim/purpose – This paper examines the relationship between budget deficits and selected macroeconomic variables in Tanzania for the period spanning from 1966 to 2015. Design/methodology/approach – The paper uses Vector autoregression (VAR) – Vector Error Correction Model (VECM) and variance decomposition techniques. The Johansen’s test is applied to examine the long run relationship among the variables under study. Findings – The Johansen’s test of cointegration indicates that the variables are cointegrated and thus have a long run relationship. The results based on the VAR-VECM estimation show that real GDP and exchange rate have a negative and significant relationship with budget deficit whereas inflation, money supply and lending interest rate have a positive one. Variance decomposition results show that variances in the budget deficits are mostly explained by the real GDP, followed by inflation and real exchange rate. Research implications/limitations – Results are very indicative, but highlight the importance of containing inflation and money supply to check their effects on budget deficits over the short run and long-run periods. Also, policy recommendation calls for fiscal authorities in Tanzania to adopt efficient and effective methods of tax collection and public sector spending. Originality/value/contribution – Tanzania has been experiencing budget deficit since the 1970s and that this budget deficit has been blamed for high indebtedness, inflation and poor investment and growth. The paper contributes to the empirical debate on the causal relationship between budget deficits and macroeconomic variables by employing VAR-VECM and variance decomposition approaches.
Źródło:
Journal of Economics and Management; 2017, 30; 20-57
1732-1948
Pojawia się w:
Journal of Economics and Management
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Robust fault detection and accommodation of the boiler unit using state space neural networks
Odporna detekcja i kompensacja uszkodzeń układu zbiornika przepływowego za pomocą sztucznych sieci neuronwych w przestrzeni stanów
Autorzy:
Czajkowski, A.
Patan, K.
Powiązania:
https://bibliotekanauki.pl/articles/153742.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
model neuronowy w przestrzeni stanów
niepewność
modelowanie błędu modelu
detekcja i kompensacja uszkodzeń
układ walczaka
state space neural networks
uncertainty
model error modelling
fault detection and accommodation
boiler unit
Opis:
The paper deals with application of state space neural network models to fault detection and accommodation of a boiler unit. The work describes two aspects. The first one is the fault detection. In this paper three methods for fault diagnosis, namely: simple and adaptive threshold as well as more robust method which is model error modelling, are described and compared. The second part of the paper presents the approach to fault accommodation based on the so-called instantaneous linearization of the already trained nonlinear state space model of the system. With the obtained linear model it is possible to derive a new control law of the boiler unit in order to eliminate the fault effect in the case of faults. All data used in experiments are collected from the boiler unit simulator implemented in Matlab/Simulink.
Artykuł dotyczy zastosowania modelu sztucznej sieci neuronowej w przestrzeni stanów do wykrywania i kompensacji uszkodzeń w układzie sterowania zbiornikiem przepływowym. Do wykrycia uszkodzenia zostały zaproponowane i doświadczalnie przetestowane trzy metody. Dwie pierwsze metody czyli progowanie proste oraz adaptacyjne polegają na obserwacji sygnału residuum i podejmowaniu decyzji przy przekroczeniu zadanego dopuszczalnego progu przez wartość tego sygnału. Trzecia metoda opiera się na zastosowaniu dodatkowego modelu dynamicznego do modelowania błędu modelu podstawowego w celu określenia zakresu niepewności jego pracy. W przypadku przekroczenia tego zakresu, można uznać, że wystąpiło uszkodzenie. Drugim podjętym przez autorów tematem jest problem kompensacji wykrytego uszkodzenia. W pracy opisuje się podejście oparte na tzw. chwilowej linearyzacji nauczonego w trybie off-line nieliniowego modelu systemu. Na podstawie zlinearyzowanego modelu możliwe jest wyznaczenie nowego prawa sterowania w celu wyeliminowania wpływu uszkodzenia w przypadku wystąpienia awarii. Wszystkie dane wykorzystywane do celów doświadczalnych są zbierane z symulatora zbiornika zrealizowanego w pakiecie Matlab/Simulink.
Źródło:
Pomiary Automatyka Kontrola; 2011, R. 57, nr 11, 11; 1428-1435
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the impact of selected economic variables on sorghum prices in Nigeria
Autorzy:
Ajibade, Toyin Benedict
Ayinde, Opeyemi Eyitayo
Abdoulaye, Tahirou
Ojoko, Emmanuel Ada
Powiązania:
https://bibliotekanauki.pl/articles/952113.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Przyrodniczy w Poznaniu. Wydawnictwo Uczelniane
Tematy:
autocorrelation
cochrane-orcutt procedure
cereal
cointegration
error correction model
time series
Opis:
Nigeria is the world’s leading producer of sorghum intended for use as food grain. Likewise, there has been growing industrial demand for sorghum in the livestock breeding and brewery sectors. As sorghum prices have been on the increase, it becomes pertinent to identify the determinants of this development in order to nip the imminent food crisis in the bud. This study relied on time series data spanning from 1970 to 2015 retrieved from FAOSTAT and World Bank databases. Analytical methods employed include the unit root test, cointegration test and error correction mechanism. The diagnostic tests indicated the presence of autocorrelation which was subsequently adjusted with the Cochrane-Orcutt procedure. Subsequent tests indicated that variables fit well to the model. As shown by the ADF unit root test, the modeled variables were non-stationary but became stationary after first differencing. At a significance level of 5%, the sorghum price was determined by gross domestic product (GDP), annual money supply, official exchange rate and crude oil price, both in the long and short run, whereas the lagged price of sorghum also had an effect on prices in the short run. The study recommends that macroeconomic variables such as GDP, annual money supply and official exchange rate be taken cognizance of when planning the agricultural development in Nigeria.
Źródło:
Journal of Agribusiness and Rural Development; 2017, 46, 4; 723-729
1899-5241
Pojawia się w:
Journal of Agribusiness and Rural Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the Cobb-Douglas Production Function as a Tool to Investigate the Impact of FDI Net Inflows on Gross Domestic Product Value in Poland in the Period 1994-2012
Autorzy:
Kosztowniak, Aneta
Powiązania:
https://bibliotekanauki.pl/articles/488854.pdf
Data publikacji:
2014
Wydawca:
Instytut Badań Gospodarczych
Tematy:
FDI
GDP
Cobb-Douglas production function
VECM (Vector Error Corection Model)
Opis:
The purpose of this paper is to analyse the impact of foreign direct investments net inflows on changes in GDP value in Poland in the period between 1994 and 2012 with the use of the Cobb-Douglas production function. The paper consist of five parts. Parts I and II present some aspects of the FDI influence on economic growth from the theoretical and empirical point of view. Part III defines conditions indispensable for the positive FDI impact on the economy of the host country. Part IV outlines changes of FDI flows in Poland in the period of 1994-2012. Part V includes the main assumptions of the Cobb-Douglas production function and an estimate of changes in GDP value for Poland in the period 1994–2012 with the use of the VECM. The factors significant for economic growth are also identified, including the significance of the net FDI inflows. Eventually, the effect of gross fixed capital formation, employment, FDI net inflows, exports and R&D on changes in the GDP value are determined.
Źródło:
Oeconomia Copernicana; 2014, 5, 4; 169-190
2083-1277
Pojawia się w:
Oeconomia Copernicana
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A price transmission analysis of pasteurised liquid milk in South Africa: granger causility approach
Autorzy:
Ramoshaba, Tshegofatso
Belete, Abanet
Hlongwane, Johanes Jan
Powiązania:
https://bibliotekanauki.pl/articles/1902627.pdf
Data publikacji:
2019-12-28
Wydawca:
Uniwersytet Przyrodniczy w Poznaniu. Wydawnictwo Uczelniane
Tematy:
price transmission
Granger causality
pasteurized liquid milk
Vector Error Correction model
Opis:
Price transmission studies have become increasingly important in Sub-Saharan Africa over the past decades because of its nature of providing clear and insightful information into these markets. In this study, the price transmission mechanism is described with an agricultural product within the dairy industry, namely pasteurized liquid milk. The aim of this study was to investigate and analyze the nature of the price transmission mechanism for pasteurized liquid milk in South Africa. The study used secondary time series data that covered a sample size of 17 years (2000–2016) for pasteurized liquid milk. The Granger causality test and the Vector Error Correction Model were used for data analysis. The Granger causality tests suggest that a bidirectional causal relationship exists between processor and farmgate prices, and also between retail and processor prices. On the other hand, retail prices were found to have a unidirectional causality effect on farmgate prices. The VECM results showed asymmetric price transmission, implying that retailers and processors react quicker to a price increase than to a price decrease. A price monitoring policy is suggested to be put in place in order to protect the consumers from unfair prices passed on by the retailers.
Źródło:
Journal of Agribusiness and Rural Development; 2019, 54, 4; 345-353
1899-5241
Pojawia się w:
Journal of Agribusiness and Rural Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Spatial Regression in Employment Characteristics Modelling
Zastosowanie regresji przestrzennej do modelowania charakterystyk zatrudnienia
Autorzy:
Pośpiech, Ewa Katarzyna
Mastalerz-Kodzis, Adrianna
Powiązania:
https://bibliotekanauki.pl/articles/660037.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
modelowanie przestrzenne
model błędu przestrzennego
model opóźnienia przestrzennego
zatrudnienie
spatial modelling
spatial error model
spatial lag model
employment
Opis:
W artykule analizowano zagadnienie poziomu zatrudnienia. Zbadano stopę zatrudnienia w wybranych regionach Europy, a następnie dla wybranych zmiennych – ludność pracująca ogółem, pracujące kobiety oraz pracujący mężczyźni – zbudowano klasyczne modele ekonometryczne i zweryfikowano konieczność uwzględnienia w modelowaniu badanego zjawiska czynnika przestrzennego. Jako zmienne objaśniające modelu wybrano zmienne demograficzne oraz PKB na mieszkańca. Badano, czy uwzględnienie w konstrukcji modeli podejścia przestrzennego poprawi ich jakość. W rozważaniach wzięto pod uwagę dwa podstawowe modele przestrzenne – model błędu przestrzennego oraz model opóźnienia przestrzennego, spośród których ten pierwszy okazał się dobrym narzędziem analiz.
The article analyses the employment characteristics. The employment rate was studied in selected regions of Europe, and subsequently, for selected variables: total population employed, women employed and men employed, classic econometric models were constructed and the necessity of including the spatial factor in the process of modelling was verified. The demographic variables and GDP per capita were chosen as explaining variables of the model. It was analysed whether including a spatial approach in the models would improve their quality. Two basic spatial models were taken into consideration: the spatial error model and the spatial lag model, the former of which turned out to be the right tool for the analyses.
Źródło:
Acta Universitatis Lodziensis. Folia Oeconomica; 2018, 3, 335; 63-74
0208-6018
2353-7663
Pojawia się w:
Acta Universitatis Lodziensis. Folia Oeconomica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model monetarny kursu równowagi złoty/euro: analiza kointegracyjna
The Monetary Model of the Zloty-Euro Equilibrium Exchange Rate: Cointegration Analysis
Autorzy:
Wdowiński, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/574303.pdf
Data publikacji:
2011-03-31
Wydawca:
Szkoła Główna Handlowa w Warszawie. Kolegium Analiz Ekonomicznych
Tematy:
Frankel monetary model
zloty/euro equilibrium exchange rate
cointegration analysis
vector error correction model
Opis:
The author carries out a cointegration analysis for the nominal exchange rate of the zloty against the euro according to a monetary theory developed by U.S. economist Jeffrey A. Frankel (1979). Wdowiński estimates a cointegration vector for the period 1999M7-2008M9. Long-term estimates show that the euro exchange rate depends on changes in industrial production and on short- and long-term interest rates, the author says. The influence of M1 money supply proves to be statistically insignificant. The departure of the euro rate from a state of monetary equilibrium was corrected slowly, the author says, because the half-life of the divergence was almost two years. The solution of the model showed that the euro exchange rate diverged significantly from a state of equilibrium determined by fundamental factors in the 1999M7-2004M1 period, while showing smaller deviations in the 2004M2-2008M9 period. Overall, the author observed periods when the zloty was both overvalued and undervalued against the euro due to a long-term equilibrium rate. The deviations stabilized noticeably from May 2003. In the 2003M5-2006M3 period, the zloty was overvalued by 9.6% on average, while in the 2006M4-2008M9 period it was undervalued by 9.3%. In the short term, the zloty tended to appreciate as a result of increases in short-term interest rates. According to the author, fundamental economic factors in Poland and the euro area point to the existence of a trend whereby the zloty is gaining ground against the euro, while short-term changes in this rate may be significant due to a growing macroeconomic risk.
Źródło:
Gospodarka Narodowa. The Polish Journal of Economics; 2011, 246, 3; 67-86
2300-5238
Pojawia się w:
Gospodarka Narodowa. The Polish Journal of Economics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Źródła fluktuacji realnego efektywnego kursu EUR/ PLN
Sources of real exchange rates fluctuations EUR/ PLN
Autorzy:
Waszkowski, Adam
Powiązania:
https://bibliotekanauki.pl/articles/452784.pdf
Data publikacji:
2011
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Katedra Ekonometrii i Statystyki
Tematy:
realny efektywny kurs walutowy, model wektorowej autoregresji, dekompozycja wariancji błędu prognozy
real exchange rate, vector autoregression model, forecast error variance decomposition
Opis:
W artykule poruszono problem wyjaśnienia źródła fluktuacji realnego efektywnego kursu walutowego na przykładzie EUR/ PLN wykorzystując podejście równowagi. Punktem wyjścia było opracowanie modelu wektorowej autoregresji oraz jego strukturalnej postaci. Specyfikacji modelu dokonano w oparciu o pracę Claridy i Galiego [1994], wykorzystując kwartalny szereg czasowy 1996- 2010 dla Polski i strefy euro. Pozwoliło to na estymację sytemu składającego się z trzech zmiennych: PKB, REER oraz HICP. Celem określenia źródła fluktuacji realnego kursu EUR/ PLN przeprowadzono dekompozycję wariancji błędu prognozy. Okazało się, że największe znaczenie (powyżej 80%) w wyjaśnieniu wariancji REER mają szoki popytowe.
In the article we've raised the issue of explaining the source of the fluctuation of the Real Effective Exchange Rate (REER) using a equilibrium approach for EUR/PLN example. The starting point was to elaborate a model of vector autoregression and its structural form. The specification of a model have been made based on Clarida and Gali's work. To determine the source of the fluctuation of the real exchange rate we used Forecast Error Variance Decomposition. It resulted that the most important (more than 80%) in explaining the variance of the REER are demand shocks.
Źródło:
Metody Ilościowe w Badaniach Ekonomicznych; 2011, 12, 2
2082-792X
Pojawia się w:
Metody Ilościowe w Badaniach Ekonomicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie wpływu nierówności płac na wzrost gospodarczy
Wage Disparities and Economic Growth
Autorzy:
Kumor, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/574833.pdf
Data publikacji:
2008-08-31
Wydawca:
Szkoła Główna Handlowa w Warszawie. Kolegium Analiz Ekonomicznych
Tematy:
wage disparities
economic growth
Lorenz ratio
co-integration analysis
error correction model
Opis:
The paper looks at the key economic and social factors that lead to wage disparities and at the same time contribute to economic growth. The author evaluates the influence of wage disparities on Poland’s economic growth in 1985-2006. Kumor measures the uneven distribution of wages with the Lorenz concentration ratio, and he also uses research methods such as a co-integration analysis and an error correction model. The analysis has confirmed the existence of a long-term cause-and-effect relationship between employment, investment, wage disparities and GDP growth.
Źródło:
Gospodarka Narodowa. The Polish Journal of Economics; 2008, 225, 7-8; 43-61
2300-5238
Pojawia się w:
Gospodarka Narodowa. The Polish Journal of Economics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Asymmetric Price Adjustments in the Fuel Market
Autorzy:
Leszkiewicz-Kędzior, Katarzyna
Welfe, Aleksander
Powiązania:
https://bibliotekanauki.pl/articles/483283.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
threshold cointegration
threshold error correction model
asymmetric price adjustment
fuel price transmission
Opis:
The purpose of the article is to verify a hypothesis about the asymmetric pass-through of crude oil prices to the selling prices of refinery products (unleaded 95 petrol and diesel oil). The distribution chain is considered at three levels: the European wholesale market, the domestic wholesale market and the domestic retail market. The error correction model with threshold cointegration proved to be an appropriate tool for making an empirical analysis based on the Polish data. As found, price transmission asymmetry in the fuel market is significant and its scale varies depending on the level of distribution. The only exception is the wholesale price transmission to the domestic refinery price. All conclusions are supported by the cumulative response functions. The analysis sheds new light on the price-setting processes in an imperfectly competitive fuel market of a medium-sized, non-oil producing European country in transition.
Źródło:
Central European Journal of Economic Modelling and Econometrics; 2014, 2; 105-127
2080-0886
2080-119X
Pojawia się w:
Central European Journal of Economic Modelling and Econometrics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determinanty cen ropy naftowej
Determinants of crude oil prices
Autorzy:
Socha, R.
Powiązania:
https://bibliotekanauki.pl/articles/282333.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
ceny ropy naftowej
WTI
model korekty błędem
kointegracja
crude oil prices
error-correction model
cointegration
Opis:
Celem artykułu jest próba identyfikacji oraz oceny stopnia wpływu najważniejszych czynników kształtujących ceny ropy naftowej WTI. Podjęcie takiej tematyki stanowi nawią- zanie do dyskusji prowadzonych przez innych badaczy rynku na łamach światowej literatury oraz podejmowanych przez nich prób określenia przyczyn silnych wahań cen surowca z lat 2007–2009. Z jednej strony w okresie tym obserwowano silne fluktuacje wielkości popytu na ropę naftową, tj. w latach 2000–2007 odnotowano ponadprzeciętny wzrost zapotrzebowania na surowiec (szczególnie w krajach azjatyckich), by w okresie kryzysu finansowego obserwować jego nagły spadek. Rosnący popyt i ceny surowca wpłynęły na zwiększenie przez firmy wydobywcze nakładów na rozpoznanie nowych złóż, czego wynikiem jest obserwowany na terenie Ameryki Północnej po 2013 roku silny wzrost wydobycia ze złóż niekonwencjonalnych. Z drugiej strony początek XXI wieku przyniósł rekordowy wzrost obrotu instrumentami finansowymi opartymi na cenach ropy naftowej. W pierwszej części artykułu zaprezentowano przegląd najważniejszych prac empirycznych w obszarze będącym przedmiotem pracy. Weryfikacja postawionego problemu badawczego opierała się na przeprowadzonej analizie kointegracji z wykorzystaniem metody Johansena oraz w drugim kroku estymacji modelu korekty błędem. Próba, na podstawie której dokonano oszacowania, to lata 2002–2014, a więc uwzględniono szczególnie istotny dla historii handlu ropą naftową okres tzw. trzeciego szoku cenowego z lat 2007–2008. Otrzymane rezultaty pozwalają wnioskować, że wpływ na procesy cenotwórcze na rynku czarnego złota mają zarówno czynniki popytowo-podażowe, jak i te związane z obrotem kontraktami terminowymi na ropę naftową. Co ważne, determinanty z pierwszej kategorii, a więc te o charakterze fundamentalnym, silniej rzutują na kształtowanie się cen. Dodatkowo można przypuszczać, że wzrost liczby transakcji futures zawieranych przez podmioty utożsamiane ze spekulacyjnymi (niezwiązane bezpośrednio z przedmiotowym rynkiem) może wpływać destabilizująco na zmiany cen ropy naftowej.
The article aims to identify and evaluate the degree of influence of the most important factors determining the price of WTI crude oil. This theme of research is fully consistent with discussions in the world literature about the reasons of strong fluctuations of crude oil prices in the years 2007–2009. On the one hand, in that period we observed strong fluctuations in oil demand, especially years 2000–2007 are interesting because we noticed a strong increase in consumption (the highest growth in Asian countries) and other period is the financial crisis when it plummeted. Increasing demand and crude oil prices were the main factors considered by oil refineries as an incentive for boosting budgets for oil fields discovery. Clearly, it resulted with a growth of extraction from the unconventional oil resources. On the other hand 21st century has brought a record growth in the trading of crude oil futures. In the first part of this article a review of the most significant empirical research has been presented. Empirical investigation was conducted using cointegration analysis (Johansen method) and in the second step estimating an error correction model. In this study we have used the sample of years 2002–2014, which are particularly relevant because it covers the years 2007–2009, when we have observed third crude oil price shock. The results of this study show that impact on the price – setting mechanism have not only supply – demand factors, but also trade of crude oil futures. However, determinants from the first group have stronger influence on WTI prices. Furthermore, it can be confirmed that the increase in a number of futures transactions is reinforcing changes of oil prices. Especially when we consider these transactions, that are taken by organizations perceived as speculative.
Źródło:
Polityka Energetyczna; 2017, 20, 1; 49--66
1429-6675
Pojawia się w:
Polityka Energetyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System pomiarowo-sterujący jako metrologiczny obiekt badań
Measuring-control system as a metrological object of investigations
Autorzy:
Jakubiec, J.
Powiązania:
https://bibliotekanauki.pl/articles/158294.pdf
Data publikacji:
2004
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
system pomiarowo-sterujący
model propagacji błędów
obliczanie niepewności
measuring-control system
error propagation model
uncertainty calculation
Opis:
Artykuł zawiera charakterystykę badań prowadzonych w Instytucie Metrologii i Automatyki Elektechnicznej nad metrologicznymi właściwościami systemów pomiarowo-sterujących. W szczególności badania te doprowadziły do opracowania modeli przydatnych do opisu tego rodzaju właściwości systemów, w tym modelu realizacji zadań pomiarowych przez system, modelu błędu i modelu niepewności systemu. Modele te pozwalają na analizę błędów podstawowych ogniw procesu pomiarowego w systemie, takich jak przetworniki próbkujące i algorytmy przetwarzania programowego, a także błędów powodowanych opóźnieniami w realizacji zadań pomiarowych. Opisano model błędu systemu oraz odpowiadający mu model niepewności, który stanowi podstawę obliczania niepewności wyników wyjściowych systemu.
The paper characterizes the research made in the Institute of Electrical Measurement and Control Engineering on the metrological properties of the control-measuring systems. In particular, the investigations carried into development of the models useful for description of the system properties, such as the model of measurement task realization by the system, an error model and an uncertainty model of the system. These models enable error analysis of the basic elements of a measurement process in the system, such as sampling converters and measurement data processing algorithms, as well as analysis of errors caused by delays in measurement task realization. An error model of the system and, adequate to it, an uncertainty model, which is the basis of uncertainty calculation of the results at the system output, has been described.
Źródło:
Pomiary Automatyka Kontrola; 2004, R. 50, nr 6, 6; 8-13
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tendencje zmian cen na światowym rynku ropy naftowej po 2000 roku
Analysis of Oil Market Trends Post-2000
Autorzy:
Socha, Robert
Wdowiński, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/575879.pdf
Data publikacji:
2018-03-31
Wydawca:
Szkoła Główna Handlowa w Warszawie. Kolegium Analiz Ekonomicznych
Tematy:
ceny ropy naftowej
OPEC
kointegracja
model wektorowej korekty błędem
oil price
cointegration
vector error correction model
Opis:
This paper aims to analyse changes in the oil market during the “third oil price shock” in 2007 and 2008. It is particularly important to investigate the influence of disruptions in oil production (in both OPEC and non-OPEC countries) on crude oil prices and consumption. The authors conduct an empirical investigation of this problem, estimating a vector error correction model and an impulse-response function. Based on the empirical data, we noticed that from 2004 to 2008 the growth in oil demand was not compensated by an appropriate increase in oil production. The results of impulse-response functions show that, with the improvement in global demand, we should rather expect OPEC production to increase. Moreover, this kind of reaction in OPEC is delayed by about four months, which can be explained by the restrictions on OPEC’s spare capacity. This limits the room for a short-term increase in OPEC production. Unexpected demand shocks or price innovations increase the level of both OPEC and non-OPEC production, but the response of OPEC is more significant. These findings may be considered as a point of departure for future analyses of OPEC production adjustments.
Celem artykułu jest przeprowadzenie analizy zmian zachodzących na rynku ropy naftowej w okresie trzeciego szoku cenowego w latach 2007-2008. Szczególnie istotna z punktu widzenia poruszanego problemu badawczego jest odpowiedź na pytanie, jaki wpływ na ceny ropy naftowej i wielkość konsumpcji tego surowca mają zaburzenia w wielkości wydobycia w grupie państw OPEC lub w państwach niestowarzyszonych w kartelu. W części empirycznej artykułu dokonano estymacji parametrów modelu wektorowej korekty błędem oraz analizy funkcji reakcji na impuls. Na podstawie wstępnej analizy danych statystycznych można zauważyć, iż wysokie tempo popytu w latach 2004-2008 nie było kompensowane przez odpowiednią dynamikę wydobycia. Na podstawie analizy funkcji reakcji na impuls można zauważyć, iż zaburzenie światowego popytu na ropę naftową wiąże się z pozytywną reakcją wydobycia państw kartelu, co skłania ku refleksji, na ile brak reakcji w latach 2007–2008 stanowił strategię polityki wydobywczej, a na ile pozostawało to poza decyzjami OPEC. Z drugiej strony pozytywna reakcja podaży OPEC na szok popytowy jest opóźniona o 4 miesiące, co daje podstawy do przypuszczeń, że natychmiastowe, krótkookresowe zwiększanie podaży w tej grupie państw jest ograniczone. Szoki wynikające z nieoczekiwanego wzrostu popytu na surowce lub zaburzeń w równaniu cen prowadzą do wzrostu produkcji w obu grupach państw. W obu przypadkach reakcja OPEC jest silniejsza.
Źródło:
Gospodarka Narodowa. The Polish Journal of Economics; 2018, 293, 1; 103-135
2300-5238
Pojawia się w:
Gospodarka Narodowa. The Polish Journal of Economics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stochastyczny model błędu pozycji GNSS
A Stochastic Model of GNSS Position Error
Autorzy:
Tomczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/360597.pdf
Data publikacji:
2006
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
GNSS
GPS
DGPS
modelowanie błędu
stochastyczny model błędu pozycji
inżynieria ruchu morskiego
EXPLO-SHIP 2006
error modeling
stochastic model of position error
marine traffic engineering
Opis:
W artykule przedstawiono metodę budowy stochastycznego modelu błędu pozycji GNSS. Zaprezentowano również wstępne wyniki symulacji błędu DGPS, omówiono algorytm działania programu symulacyjnego i jego zastosowania w badaniach inżynierii ruchu morskiego.
The article presents a method of stochastic modeling of a GNSS position error. Preliminary results of DGPS error simulation are presented, a simulation algorithm is described as well as its application in sea traffic engineering research.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2006, 11 (83); 319-329
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The response of Zimbabwe tobacco exports to real exchange rates volatility
THE RESPONSE OF ZIMBABWE TOBACCO EXPORTS TO REAL EXCHANGE RATES VOLATILITY
Autorzy:
Mutodi, Knowledge
Chuchu, Tinashe
Maziriri, Eugine Tafadzwa
Powiązania:
https://bibliotekanauki.pl/articles/1892227.pdf
Data publikacji:
2020-07-08
Wydawca:
Uniwersytet Przyrodniczy w Poznaniu. Wydawnictwo Uczelniane
Tematy:
Real exchange rate (RER)
Real exchange rate volatility (RERV)
Vector error correction model (VECM)
Opis:
The focus of this study was on investigating the response of tobacco exports to real exchange rates and real exchange rate volatility and other factors in Zimbabwe using secondary data spanning from 1980 to 2019. Bilateral nominal exchange rates and time-variant weights of Zimbabwe’s 10 major trading partners were calculated and used to compute the real exchange rate index. The time-dependent weighting system was used to better represent the evolution of trade patterns in the index. The arithmetic method was employed for computing the index. Generalized autoregressive conditional heteroskedasticity (GARCH) and autoregressive conditional heteroscedasticity (ARCH) models were used to generate the real exchange rate volatility index. The export response function was adopted as the tobacco exports response model. The variables in the tobacco exports response model were the realworld Gross Domestic Product (GDP), real exchange rate, terms of trade, real exchange rate volatility and dollarization. A vector error correction model (VECM) was used to estimate the response of tobacco exports to real exchange rate, real exchange rate volatility and other factors. The VECM results indicated that real world GDP was insignificant in both the short and long run. In the long run, the real exchange rate appreciation had a negative impact on tobacco exports. Conversely, in the short run, the depreciation of real exchange rate had a positive impact on tobacco exports. Hence, the government has to adopt other mechanisms that reduce uncertain movements of exchange rates.
Źródło:
Journal of Agribusiness and Rural Development; 2020, 56, 2; 201-219
1899-5241
Pojawia się w:
Journal of Agribusiness and Rural Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Long-Run Relationship between Daily Prices on Two Markets: The Bayesian VAR(2)–MSF-SBEKK Model
Autorzy:
Osiewalski, Krzysztof
Osiewalski, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/483271.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Bayesian econometrics
vector error correction model
hybrid MGARCH-MSV processes
financial markets
commodity markets
Opis:
We develop a fully Bayesian framework for analysis and comparison of two competing approaches to modelling daily prices on different markets. The first approach, prevailing in financial econometrics, amounts to assuming that logarithms of prices behave like a multivariate random walk; this approach describes logarithmic returns most often by the VAR(1) model with MGARCH (or sometimes MSV) disturbances. In the second approach, considered here, it is assumed that daily price levels are linked together and, thus, the error correction term is added to the usual VAR(1)–MGARCH or VAR(1)–MSV model for logarithmic returns, leading to a reduced rank VAR(2) specification for logarithms of prices. The model proposed in the paper uses a hybrid MSVMGARCH structure for VAR(2) disturbances. In order to keep cointegration modelling as simple as possible, we restrict to the case of two prices representing two different markets. The aim of the paper is to show how to check if a long-run relationship between daily prices exists and whether taking it into account influences our inference on volatility and short-run relations between returns on different markets. In the empirical example the daily values of the S&P500 index and the WTI oil price in the period 19.12.2005 – 30.09.2011 are jointly modelled. It is shown that, although the logarithms of the values of S&P500 and WTI oil price seem to be cointegrated, neglecting the error correction term leads to practically the same conclusions on volatility and conditional correlation as keeping it in the model.
Źródło:
Central European Journal of Economic Modelling and Econometrics; 2013, 5, 1; 65-83
2080-0886
2080-119X
Pojawia się w:
Central European Journal of Economic Modelling and Econometrics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling Nigerian Government Revenues and Total Expenditure: Combined Estimators’ Analysis and Error Correction Model Approach
Autorzy:
Ayinde, Kayode
Bello, Aliyu A.
Ayinde, Opeyemi E.
Adekanmbi, Damilola B.
Powiązania:
https://bibliotekanauki.pl/articles/2076559.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
unit root test
cointegration test
combined estimators
error correction model
feasible generalized linear estimators
Opis:
The national total expenditure of a country is precipitated on several factors of which revenue generated could be one and very significant. This paper therefore examines the contribution of some selected sources of Nigerian government revenue to total national expenditure. Statistical and econometric techniques used for the data analysis are unit root test, cointegration test, combined estimators’ analysis, the error correction model (ECM) and the feasible generalized linear (FGLS) estimators. Results showed that the variables are non stationary but are stationary at first difference. The long-run relationship of total expenditure on oil revenue, non-oil revenue, federation account and federal retained revenue revealed that the variables are cointegrated and required the use of combined estimators. The effect of nonoil revenue and federal retained revenue is very significant. Investigations on the short-run modeling necessitated the use of FGLS estimators. The effect of ECM and federal retained revenue is very significant. Consequently, other sources of revenue apart from federal retained revenue need to be enhanced and tailored towards improving economic growth and development through national expenditure.
Źródło:
Central European Journal of Economic Modelling and Econometrics; 2015, 1; 1-14
2080-0886
2080-119X
Pojawia się w:
Central European Journal of Economic Modelling and Econometrics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rationalization of the energy consumption of road transport for sustainable development
Autorzy:
Szaruga, Elżbieta
Powiązania:
https://bibliotekanauki.pl/articles/135696.pdf
Data publikacji:
2020
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
energy consumption
freight road transport
rationalization
steady-state economy
sustainable development
vector error correction model
Opis:
This paper presents an approach to rationalize the energy consumption of road transport towards sustainability in a steady-state economy. The research hypothesis is that the rationalization of the energy consumption of road transport is affected by drift and shocks, which desynchronizes the adjustment mechanism from equilibrium. The objective of this research was to incorporate the model of energy consumption of road freight transport with the goals of sustainability by considering ecological and constructivist rational orders, the issue of order drift, and the occurrence of shocks. The research investigated Poland from the first quarter of 2004 to the fourth quarter of 2018. A model for rationalizing the energy consumption of road transport was constructed using the vector error correction model and cointegration techniques. The model revealed one cointegrating relationship and showed statistically significant unlimited drift. The level of changes to long-term equilibrium appeared respectively for GDP – 1.8%, PPI for energy – 7.3%, and for energy consumption – 10.9%. We observed a weak sustainability between the energy consumption of road transport and GDP and a strong sustainability between energy consumption of road transport and PPI energy. It was determined that price shocks had a positive impact (at the estimated point level around 0.06) and supply and demand shocks had a negative impact (at the level estimated point around –3).
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2020, 62 (134); 36-42
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of price and income effects on Ukraine’s agricultural export growth
Autorzy:
Shevchuk, V.
Powiązania:
https://bibliotekanauki.pl/articles/94757.pdf
Data publikacji:
2013
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
agricultural exports
error-correction model
exchange rate effects
price and income effects
eksport rolny
model korekty błędów
efekty kursowe
Opis:
Using monthly data for the 2001─2013 period, this paper applies Error- Correction Model (ECM) to estimate export demand effects for Ukraine’s agricultural commodities and foodstuffs. According to our results, the long-run exchange rate sensitivity of export demand seems to be rather weak, whereas the domestic income effect is high enough across all four groups: (i) meat, fish and dairy products; (ii) wheat and vegetables; (iii) vegetable oil and (iv) foodstuffs. No evidence is found of the long-term relationship between agricultural exports and foreign trade-partner industrial output. However, both exchange rate and foreign output are established to strongly affect the demand for agricultural exports in the short-run. Also, there is evidence of a speedy short-run adjustment for all groups of agricultural exports to their long-run relationships.
Źródło:
Information Systems in Management; 2013, 2, 3; 214-226
2084-5537
2544-1728
Pojawia się w:
Information Systems in Management
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studying the Stock Market – Economic Activity Nexus in Poland with a VAR‑VECM Approach
Badanie współzależności pomiędzy rynkiem akcji a poziomem aktywności gospodarczej w Polsce z wykorzystaniem metodologii VAR‑VECM
Autorzy:
Pietraszewski, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/655935.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
WIG
produkt krajowy brutto
autoregresja wektorowa
kointegracja
model korekty błędem
Gross Domestic Product
vector autoregression
cointegration
error correction model
Opis:
W artykule omówiono związki pomiędzy koniunkturą giełdową a realną aktywnością gospodarczą oraz przedstawiono wyniki badania współzależności pomiędzy zmianami głównego indeksu akcji na GPW w Warszawie (WIG) oraz PKB w Polsce w latach 1995–2019. W wielu studiach empirycznych dla krajów wysoko rozwiniętych wykazano istnienie nie tylko dynamicznych interakcji krótkookresowych, ale również długoterminowej relacji kointegrującej pomiędzy poziomami indeksu i produktu. Dotychczasowe badania dla Polski wskazywały głównie na związki krótkookresowe pomiędzy stopami zwrotu z akcji a zmianami aktywności gospodarczej, podczas gdy dowody na istnienie długookresowej relacji kointegrującej są jak dotąd nieliczne. W artykule zastosowano metodologię VAR‑VECM oraz procedurę Johansena do badania kointegracji dla znacznie dłuższego szeregu danych kwartalnych niż w prowadzonych do tej pory badaniach. Badanie wykazało, że stopy zwrotu z akcji są przyczyną w sensie Grangera dla zmian PKB, przy czym wyprzedzenie w czasie sięga do trzech kwartałów. Znaleziono również dowody na istnienie długoterminowej relacji kointegrującej.
The paper discusses the links between stock market performance and real economic activity and presents results of an empirical inquiry into dynamic relationships between the main stock index quoted on the Warsaw Stock Exchange (WIG) and GDP in Poland over the years 1995–2019. In many empirical studies for highly developed countries not only short‑run dynamic interactions but also a long‑run cointegrating relationship between the stock index and output have been found. Previous studies for Poland reported mainly short‑run linkages between stock returns and changes of economic activity whereas the evidence for a long‑run cointegrating relationship is still quite scarce. In this paper, the VAR‑VECM methodology with the Johansen tests for cointegration is used to study a substantially longer quarterly data interval than has been investigated so far. Research results show that stock returns Granger‑cause GDP growth with up to three‑quarters lead. The evidence for the existence of a long‑term cointegrating relationship has also been found.
Źródło:
Acta Universitatis Lodziensis. Folia Oeconomica; 2020, 3, 348; 65-89
0208-6018
2353-7663
Pojawia się w:
Acta Universitatis Lodziensis. Folia Oeconomica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Econometric analysis of SMEs in Eurozone
Autorzy:
Stoklasová, Radmila
Powiązania:
https://bibliotekanauki.pl/articles/1202454.pdf
Data publikacji:
2018
Wydawca:
Wyższa Szkoła Biznesu w Dąbrowie Górniczej
Tematy:
Error correction model
expenditure on R&D
Granger causality
labour productivity
regression analysis
small and medium-size enterprises solow model
Opis:
The purpose of this paper is to empirically investigate the relationship between labour productivity (LP) and government spending on research and development (R&D) in the Euro zone. In particular, its purpose is to investigate this relationship in the case of small and medium enterprises (SMEs). By utilizing causality tests and error correction models, the results suggest that support of research and development is the cause of labour productivity growth in the long-term period. However, for the short-term period changes in labour productivity precede changes in government spending on research and development. Based on the findings, the study has several theoretical and practical implications. The data sources were the Eurostat database. The data used have the character of annual time series in the period between 2004 and 2015. GRETL software was used for the calculations.
Źródło:
Forum Scientiae Oeconomia; 2018, Volume 6 (2018) Issue No. 1: Competitiveness of the modern organization: human, ethical and innovative aspects; 19-30
2300-5947
Pojawia się w:
Forum Scientiae Oeconomia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie modeli przestrzennych w analizie zjawiska starzenia się populacji
Application of spatial models in the analysis of the phenomenon of an aging population
Autorzy:
Zeug-Żebro, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/2011770.pdf
Data publikacji:
2020
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
analiza zjawiska starości
skutki społeczno-ekonomiczne
model błędu przestrzennego
model opóźnienia przestrzennego
analysis of the phenomenon of old age
socio-economic effects
spatial error model
spatial delay model
Opis:
Proces starzenia się społeczeństwa jest zjawiskiem wieloaspektowym, na które ma wpływ m.in. demograficzna i przestrzenna charakterystyka badanych obszarów. Zastosowanie analizy przestrzennej do badania tego procesu pozwala na ustalenie istniejących relacji między badanymi regionami w odniesieniu do tego zjawiska. W artykule podjęto próbę przestrzennego modelowania zjawiska starzenia się ludności. Dla wybranej zmiennej charakteryzującej starzejącą się populację, tj. liczby osób w wieku poprodukcyjnym, stworzono klasyczny model ekonometryczny oraz zweryfikowano konieczność uwzględnienia czynnika przestrzennego w modelowaniu badanego zjawiska. Jako zmienne objaśniające modelu wzięto pod uwagę zmienne demograficzne oraz zmienne o charakterze ekonomiczno-społecznym. W tym celu rozpatrzono dwa modele przestrzenne: błędu przestrzennego i opóźnienia przestrzennego.
The aging process is a multifaceted phenomenon affected by, inter alia, the demographic and spatial nature of individuals. The application of spatial analysis to investigate this process will demonstrate the existing relationships between the studied regions with respect to this phenomenon. The article attempts to model the phenomenon of spatial aging of the population. For selected variables characterizing an aging population, i.e. the total number of post-working age people – classic econometric models were constructed and the necessity of including the spatial factor in the process of modelling was verified. The demographic variables and variables of an economic and social nature were chosen as explaining variables of the model. For this purpose, two spatial models will be considered: the spatial error model and spatial lag model. All calculations and maps will be made in the statistical program R CRAN and Microsoft Excel.
Źródło:
Zeszyty Naukowe Politechniki Poznańskiej. Organizacja i Zarządzanie; 2020, 81; 263-276
0239-9415
Pojawia się w:
Zeszyty Naukowe Politechniki Poznańskiej. Organizacja i Zarządzanie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model korekty błędem i jego funkcja trendu przełącznikowego - symulacja i interpretacja
Error correction model and its switching trend - simulation and interpretation
Autorzy:
Ossowski, Jerzy Czesław
Powiązania:
https://bibliotekanauki.pl/articles/1878412.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska
Tematy:
przyczynowo-skutkowy model dynamiczny
model korekty błędem (ECM)
trend przełącznikowy modelu dynamicznego
cause-effect dynamic model
error correction model (ECM)
switching trend of the dynamic model
Opis:
W części teoretycznej artykułu zdefiniowano funkcję trendu przełącznikowego przyporządkowanego jednoznacznie dynamicznemu modelowi korekty błędem (ECM). Przełącznikami w zdefiniowanym trendzie są zmienne egzogeniczne modelu dynamicznego. Prowadząc rozważania dotyczące obu postaci przyczynowo-skutkowego modelu autoregresyjnego: — zdefiniowano krótko- i długookresowe efekty mnożnikowe oddziaływania zmiennych egzogenicznych na zmienną endogeniczną; — przedstawiono wykresy graficzne trendu przełącznikowego wraz z jego granicznymi poziomami; — przeprowadzono symulację zachowania się zmiennej endogenicznej dla założonych zmian zmiennych egzogenicznych; — sprawdzono równoważność rozpatrywanego modelu korekty błędem z jego trendem przełącznikowym w warunkach deterministycznych i stochastycznych zmian.
The theoretical part of the article defines the function of the switching trend associated with the unambiguously dynamic error correction model (ECM). The switches in the defined trend are exogenous variables of the dynamic model. Conducting considerations regarding both forms of the cause-and-effect autoregressive model include: — short and long-term multiplier effects of impact of exogenous variables on the endogenous variable were defined, — graphical graphs of the switching trend with its boundary levels are presented, — simulated the behavior of endogenous variable for assumed changes of exogenous variables, — the equivalence of the considered error correction model with its switching trend in deterministic and stochastic conditions was checked.
Źródło:
Przedsiębiorstwo we współczesnej gospodarce - teoria i praktyka; 2018, 4, 27; 19-49
2084-6495
Pojawia się w:
Przedsiębiorstwo we współczesnej gospodarce - teoria i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of geometrical and dimensional errors on kinematics and dynamics of Tracta coupling
Wpływ błędów geometrycznych i wymiarowych na kinematykę i dynamikę przegubu równobieżnego typu Tracta
Autorzy:
Valentini, P. P.
Pezzuti, E.
Powiązania:
https://bibliotekanauki.pl/articles/280958.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
Tracta joint
tolerance
mechanical error
multibody model
Opis:
The paper deals with the investigation of the influence of geometrical and dimensional errors on performance of the Tracta coupling. It is one of the most simple constant-velocity joints which has been used in front-wheel drive automobiles, all-wheel drive military vehicles, heavy vehicles and various other applications. The proposed study is based on building and simulating a parametric spatial multibody model of the full joint. Both kinematic and dynamic behaviour have been investigated. Five different linear and angular errors have been studied. The sensitivity of kinematics and dynamics irregularities to these errors has been computed and summarized in design charts. The results can be used in optimal tolerance allocation and accurate vehicle system simulation with the coupling joint sub-model.
W pracy przedstawiono badania wpływu błędów geometrycznych i wymiarowych na pracę przegubu typu Tracta. To jedno z najprostszych rozwiązań konstrukcyjnych przegubu równobieżnego, który szeroko stosowany jest w przednich osiach napędowych samochodów osobowych, pojazdach wojskowych z napędem na wszystkie osie, ciężkich pojazdach i wielu innych maszynach. Przedstawione badania oparto na symulacjach wielobryłowego i przestrzennego modelu przegubu. Przeanalizowano właściwości kinematyczne i dynamiczne modelu uwzględniającego pięć różnych błędów geometrycznych odnoszących się do wymiarów liniowych i kątowych. Wrażliwość modelu na błędy opisano za pomocą charakterystyk kinematycznych i dynamicznych układu w funkcji wielkości tych odchyłek. Otrzymane wykresy mogą stanowić podstawę do optymalizacji obszaru tolerancji w projektowaniu przegubu Tracta oraz być pomocne przy właściwej symulacji zachowania się pojazdów wyposażonych w takie przeguby i opisanych modelem omówionym w pracy.
Źródło:
Journal of Theoretical and Applied Mechanics; 2011, 49, 1; 117-133
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Knowledge base and assumptions for holistic modelling aimed at reducing axial errors of complex machine tools
Autorzy:
Jędrzejewski, J.
Kwaśny, W.
Powiązania:
https://bibliotekanauki.pl/articles/99902.pdf
Data publikacji:
2013
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
holistic model
machine tool
power losses
error
Opis:
The paper presents the idea and need for the holistic modelling of machine tools. The complexity of such modelling is illustrated for a 5-axis machining centre. The need to model errors in the controllable axes of machine tools with rotational and linear motion drives is indicated. The physical dependences having a bearing on the state of deformations produced by temperature and dynamic forces, as well as the assumptions and computational modelsof shift generation in the high-speed bearing sets of spindles, and models of the behaviour of the ball screw are presented. Moreover, the results of experimental studies of the thermal behaviour of linear motor sets and guideways with rolling blocks are reported.
Źródło:
Journal of Machine Engineering; 2013, 13, 2; 7-25
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure numerical model updating on the results of experimental dynamic tests
Autorzy:
Sidorov, V.
Powiązania:
https://bibliotekanauki.pl/articles/402122.pdf
Data publikacji:
2012
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
computational model
natural frequencies
dynamic test
perturbation error
Opis:
The paper presents an algorithm of structure calculation model adjustment by the values of free oscillations frequencies of structures, obtained as a result of experimental research. It is considered that the experimental test of a construction can obtain some values of the natural frequencies of the object and identify the corresponding forms of free oscillations.
Źródło:
Structure and Environment; 2012, 4, 3; 5-7
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Handling ambient temperature changes in correlative thermal error compensation
Autorzy:
Naumann, Christian
Geist, Alexander
Putz, Matthias
Powiązania:
https://bibliotekanauki.pl/articles/28407326.pdf
Data publikacji:
2023
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
machine tool
thermal error
correlative compensation model
ambient effect
ETVE
environmental temperature variation error
Opis:
Thermal errors are one of the leading causes for positioning inaccuracies in modern machine tools. These errors are caused by various internal and external heat sources and sinks, which shape the machine tool’s temperature field and thus its deformation. Model based thermal error prediction and compensation is one way to reduce these inaccuracies. A new composite correlative model for the compensation of both internal and external thermal effects is presented. The composite model comprises a submodel for slow long- and medium-term ambient changes, one for short-term ambient changes and one for all internal thermal influences. A number of model assumptions are made to allow for this separation of thermal effects. The model was trained using a large number of FE simulations and validated online in a five-axis machine tool with measurements in a climate chamber. Despite the limitations, the compensation model achieved good predictions of the thermal error for both normal ambient conditions (21°C) and extreme ambient conditions (35°C).
Źródło:
Journal of Machine Engineering; 2023, 23, 4; 43--63
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczanie parametrów rozszerzonego modelu Strejca w warunkach silnych zakłóceń, przy wykorzystaniu specjalnych charakterystyk
Determination of parameters of an extended Strejc model under strong disturbances using special characteristics
Autorzy:
Żuchowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/156806.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
model Strejca
identyfikacja
zakłócenia
eliminowanie błędów
Strejc model
identification
disturbances
error elimination
Opis:
Stosunkowo szybkie i proste metody wyznaczania parametrów modeli Strejca dla liniowych obiektów dynamicznych oparte o pomiar charakterystyki skokowej i jej wybrane, szczególne cechy, w warunkach występowania silnych zakłóceń, nie gwarantują odpowiedniej dokładności. Proponowane metody wykorzystujące algorytmy genetyczne wymagają użycia specjalnych, złożonych programów komputerowych i zdają się wydłużać czas trwania procesu identyfikacji. Zaproponowano metodę opartą także na pomiarze zakłóconej charakterystyki skokowej, ale na prostych metodach jej całkowania numerycznego, prowadzące do skutecznego uśredniania zakłóceń i przy wykorzystaniu specjalnych charakterystyk. Rozważania zilustrowano przykładami symulacyjnymi.
Relatively fast and simple methods of determining parameters of Strejc models for linear dynamic objects based on the measurement of a step response and its chosen, special features, under strong disturbances do not guarantee appropriate precision. Proposed methods that use genetic algorithms require the usage of special, complex computer programs and seem to increase the time of process identification. A method based on the measurement of the disturbed step response and also on simple methods of numerical integration leading to an effective averaging of disturbances and by using special characteristics is proposed. The considerations are illustrated with the simulation examples.
Źródło:
Pomiary Automatyka Kontrola; 2014, R. 60, nr 12, 12; 1215-1217
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Long-term relationship estimation and coupling/decoupling analysis between motorway traffic and Gross Value Added. Specification of an ARDL cointegration approach and application to the Italian case study
Autorzy:
Pampigna, Andrea
Mauro, Raffaele
Powiązania:
https://bibliotekanauki.pl/articles/2067397.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
toll roads
motorway
traffic
cointegration
transport studies
error-correction model
Italian case study
drogi płatne
ruch na autostradzie
kointegracja
badania transportowe
model korekcji błędów
studium przypadku włoskie
Opis:
As transportation is an activity derived from spatial complementarities between a certain supply at an origin and a certain demand at a destination, according to a general axiom it seems that economic activities entail transport demand. In this perspective, an essential analysis deals with the quantification of the relationships between transport demand and certain socioeconomic variables. Elasticity is a concept widely used in transport economics as a measure of the responsiveness of transport demand concerning different factors represented as independent variables in an econometric model and coupling/decoupling concepts have been proposed in literature. This paper deals with the estimation of elasticities of motorway traffic demand based on Gross Value Added (GVA), and the consequent investigation of coupling/decoupling situation. The analysis is based on the application of an Autoregressive-Distributed Lag (ARDL) cointegration model with the F-bound test and of the related Error Correction model. Starting from the general ARDL model and the methodology for the verification of its robustness, the same model is applied to the Italian toll road network. The time series of GVA for goods and services and the overall length of the toll network from 1995 to 2019 are considered as explanatory variables of the total annual distance traveled by light and heavy vehicles. The various tests in the ARDL framework show a cointegration between the variables, under the fulfillment of all the diagnostic requirements. In this way, the long-term elasticities and the short-term adjustment dynamics are estimated separately for the goods and services components of GVA, and light and heavy vehicles. Starting from stable estimates of elasticities, the long-term coupling and decoupling effects between motorway traffic of light and heavy vehicles and the national production of goods and services can be shown. The paper, as well as providing an updated picture of the Italian situation, identifies a methodological framework that can be transferred to other contexts for a sector of great interest to investors, such as the motorway sector. All this can be useful to meet the needs of numerous stakeholders, who want to deepen the links between the economic cycle and traffic demand on toll motorways.
Źródło:
Archives of Transport; 2021, 60, 4; 39--56
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Makroekonomiczne czynniki ryzyka kredytowego w sektorze bankowym w Polsce
Macroeconomic Credit Risk Factors in Poland’s Banking Sector
Autorzy:
Wdowiński, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/574992.pdf
Data publikacji:
2014-08-31
Wydawca:
Szkoła Główna Handlowa w Warszawie. Kolegium Analiz Ekonomicznych
Tematy:
sektor bankowy
ryzyko kredytowe
testy warunków skrajnych
model korekty błędem
analiza symulacyjna
scenariusz makroekonomiczny
banking sector
credit risk
stress testing
error correction model
simulation analysis
macroeconomic scenario
Opis:
The article explores key micro- and macroeconomic factors with an impact on credit risk and analyzes the credit risk model prevalent in Poland’s banking sector. Credit risk is one of the most important risks in the banking sector, the author says. He adds that risk management should be subject to strict owner control and regulatory and supervisory measures. On the basis of quarterly data for a period from the first quarter of 1997 to the second quarter of 2013, Wdowiński estimated an error correction model for aggregate credit risk in Poland, as measured by the proportion of non‑performing loans (NPLs) in total loans. The key macroeconomic factors considered by the author were GDP, the interest rate, the unemployment rate, and the exchange rate. An ex post simulation for the 2008–2012 period, based on an adverse macroeconomic scenario for Poland, showed that such a scenario could lead to a marked increase in credit risk for non‑financial enterprises and households, Wdowiński says. As a result of this scenario, the banking sector could be affected by a significant decline in activity and its financial position would deteriorate. This would mean fewer investment opportunities for banks and a decline in their capital position, which would reduce their ability to absorb losses. Such a situation, the author concludes, could lead to “second‑round” effects based on limiting financing for the real economy due to increased credit risk and increased lending margins.
Celem artykułu jest przegląd głównych czynników mikro- i makroekonomicznych wpływających na ryzyko kredytowe oraz analiza modelu ryzyka kredytowego w sektorze bankowym w Polsce. Ryzyko kredytowe jest jednym z najważniejszych rodzajów ryzyka jakie podejmuje się w sektorze bankowym. Zarządzanie tym ryzykiem powinno podlegać ścisłej kontroli zarówno ze strony właścicieli, jak i poprzez działania o charakterze regulacyjno‑nadzorczym. Na podstawie kwartalnych danych statystycznych w okresie od I kw. 1997 r. do II kw. 2013 r. oszacowano model korekty błędem dla zagregowanego ryzyka kredytowego w Polsce, mierzonego za pomocą odsetka kredytów z utratą wartości w kredytach ogółem. Za najważniejsze czynniki makroekonomiczne przyjęto PKB, stopę procentową, stopę bezrobocia oraz kurs walutowy. Przeprowadzono symulację ex post w latach 2008-2012 opierając się na scenariuszu makroekonomicznym obrazującym głęboką recesję gospodarczą w Polsce. Pokazano, że jego realizacja mogłaby spowodować wyraźny wzrost ryzyka kredytowego zarówno w odniesieniu do przedsiębiorstw niefinansowych, jak i gospodarstw domowych. W wyniku materializacji tego scenariusza sektor bankowy mógłby zostać dotknięty znacznym spadkiem aktywności i pogorszeniem się wyniku finansowego. Oznaczałoby to mniejsze możliwości inwestycyjne banków i pogorszenie się ich pozycji kapitałowej, co zmniejszyłoby ich zdolność do absorpcji strat. Sytuacja taka mogłaby doprowadzić do efektów „drugiej rundy” polegających na ograniczeniu finansowania sfery realnej gospodarki wskutek wzrostu ryzyka kredytowego i wzrostu marż kredytowych.
Źródło:
Gospodarka Narodowa. The Polish Journal of Economics; 2014, 272, 4; 55-77
2300-5238
Pojawia się w:
Gospodarka Narodowa. The Polish Journal of Economics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On Mean Squared Error of Hierarchical Estimator
Autorzy:
Brodowski, Stanisław
Powiązania:
https://bibliotekanauki.pl/articles/1373498.pdf
Data publikacji:
2011
Wydawca:
Uniwersytet Jagielloński. Wydawnictwo Uniwersytetu Jagiellońskiego
Tematy:
Hierarchial Estimator
hierarchical model
regression
function approximation
error
theorem
Opis:
In this paper a new theorem about components of the mean squared error of Hierarchical Estimator is presented. Hierarchical Estimator is a machine learning meta-algorithm that attempts to build, in an incremental and hierarchical manner, a tree of relatively simple function estimators and combine their results to achieve better accuracy than any of the individual ones. The components of the error of a node of such a tree are: weighted mean of the error of the estimator in a node and the errors of children, a non-positive term that descreases below 0 if children responses on any example dier and a term representing relative quality of an internal weighting function, which can be conservatively kept at 0 if needed. Guidelines for achieving good results based on the theorem are brie discussed.
Źródło:
Schedae Informaticae; 2011, 20; 83-99
0860-0295
2083-8476
Pojawia się w:
Schedae Informaticae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A physical model of separation process by means of jigs
Autorzy:
Surowiak, A.
Brozek, M.
Powiązania:
https://bibliotekanauki.pl/articles/110846.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
jigging process
physical model
Maxwell distribution
probable error
imperfection
Opis:
In the case of ideal separation of minerals, partition into products is conducted according to a specific partition feature which is, for instance, the density of raw material. Usually, enrichment in a jig is described by means of the particle density as a partition feature. However, the degree of particle loosening in the jig's bed is influenced by, among others, the particle free settling velocity. After some time of the pulsating movement duration, particle segregation along the vertical axis according to the settling velocity will occur. It can be said that the particle free settling velocity constitutes a feature characteristic of the feed heterogeneous in terms of physical and geometric properties in the jigging process. In the article on the basis of heuristic considerations, a physical model of the partition function (recovery of the i-th fraction), in which interactions between particles in the working bed of the jig are taken into account, is derived. A cause of the formation of the mechanism of particle dispersion around equilibrium layers is given and the accuracy of particle partition for a narrow size fraction in two variations, i.e. in conditions when a partition feature is, accordingly, the particle density and settling velocity, is calculated. These calculations allowed for the analysis of causes of process and inherent dispersion formation which takes place during the jigging process.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 228-243
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ensembling a linear regression model with an error mitigation component
Autorzy:
Nowosielski, A.
Kowalski, P. A.
Kulczycki, P.
Powiązania:
https://bibliotekanauki.pl/articles/950759.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
ensemble model
error mitigation
regression model
linear regression
FPA
RSS
RSE
model regresji
regresja liniowa
Opis:
This paper presents a proposal of a model error mitigation technique based on the error distribution analysis of the original model and creatng the additional model that tempers the error impact in particular domain areas identified as the most sensitive. both models are then combined into single ensemble model. The idea is demonstrated on the trivial two-dimensional linear regression model.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2018, 12, 1; 40-43
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
KONIUNKTURA NA POLSKIM RYNKU KAPITAŁOWYM WOBEC SYTUACJI NA RYNKACH WIODĄCYCH
CONDITIONS OF POLISH CAPITAL MARKET AGAINST THE SITUATION ON LEADING MARKETS
Autorzy:
Waściński, Tadeusz
Przekota, Grzegorz
Sobczak, Lidia
Powiązania:
https://bibliotekanauki.pl/articles/452768.pdf
Data publikacji:
2009
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Katedra Ekonometrii i Statystyki
Tematy:
rynki kapitałowe
szeregi czasowe indeksów
model korekty błędów
analiza korelacji
modele transmisji
capital markets
temporary rows of indexes
Error Correction Model (ECM)
coefficients of correlation
models of transmission
Opis:
W przedstawionym artykule „Koniunktura na polskim rynku kapitałowym wobec sytuacji na rynkach wiodących” podjęto próbę określenia siły i kierunku powiązań pomiędzy indeksem WIG Giełdy Papierów Wartościowych w Warszawie a indeksami wiodących giełd światowych: Stany Zjednoczone (S&P 500) oraz Japonia (NIKKEI 225). Analizie poddano dane dzienne wartości wybranych indeksów giełdowych za lata 2000-2008. Wykorzystano tutaj proste metody korelacyjne oraz model z Mechanizmem Korekty Błędem. Wyniki badań wskazują na pełne zintegrowanie polskiego rynku z rozwiniętymi rynkami zagranicznymi. Wysoka siła powiązania uwidoczniła się w ostatnich latach. Reakcja rynku polskiego na sytuację na rynkach zagranicznych następuje w czasie rzeczywistym. Podstawową przyczyną integracji rynków jest ich otwartość oraz rozwój technik komunikacji.
The paper presents an attempt towards determination of the strength and direction of relations between the WIG index of Stock Exchange in Warsaw and the indexes of leading world stock exchanges in the United States (S&P 500) and Japan (NIKKEI 225). The daily data values of selected stock exchange indexes for the period 2000-2008 were analyzed, using the simple correlation methods and a model with Error Correction Mechanism. The results point out at full integration of Polish market with the developed foreign markets. The high strength of relations has occurred in recent years. The Polish market response to situation on foreign markets occurs in real time. The basic cause of market integration is their open nature and development of communication techniques.
Źródło:
Metody Ilościowe w Badaniach Ekonomicznych; 2009, 10, 1; 243-251
2082-792X
Pojawia się w:
Metody Ilościowe w Badaniach Ekonomicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ niedokładności Cyfrowego Modelu Rzeźby Terenu na błąd nachyleń i azymutów
An impact of the digital terrain relief model inaccuracy on a slopes and bearings error
Autorzy:
Hejmanowska, B.
Powiązania:
https://bibliotekanauki.pl/articles/130370.pdf
Data publikacji:
2000
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
Cyfrowy Model Rzeźby Terenu
System Informacji Geograficznej
błąd azumutu
błąd nachyleń
Digital Terrain Relief Model
geographic information system (GIS)
bearing error
slope error
Opis:
Cyfrowy Model Rzeźby Terenu (CMRT) wykorzystywany jest powszechnie w Systemach Informacji Geograficznej, między innymi w celu obliczenia spadków i ekspozycji terenu. Mogą one być dalej wykorzystywane do analiz typu np.: wybór optymalnej lokalizacji obiektu lub określenie najkrótszej drogi. CMRT może być także bezpośrednio wykorzystywany do analiz np. zagrożeń powodziowych. Od poprawności, wiarygodności modelu zależy wynik przeprowadzonej analizy. Cyfrowy model terenu występuje w postaci siatki trójkątów tzw. TIN lub kwadratów, tzw. GRID. Pomimo, że model typu TIN jest bardziej „reprezentatywny”, lepiej „przylega” do rzeczywistej powierzchni terenu do analiz przestrzennych wykorzystuje się zwykle model, typu GRID. Gridowe pakiety GIS.’owe zawierają moduły do generowania spadków i azymutów oparte o różne algorytmy obliczeniowe. W Zakładzie Fotogrametrii i Informatyki Teledetekcyjnej AGH w Krakowie badano wpływ algorytmu obliczeniowego na wartości spadków i ekspozycji /Drzewiecki. W,Mularz S., Pirowski T., 1999/.W niniejszym artykule przedstawiony został natomiast problem wpływu niedokładności modelu na błąd nachyleń i azymutów, a nie wpływu różnych algorytmów na poprawność określenia spadków i azymutów.
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2000, 10; 41-1-41-14
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Składanie występujących w systemie pomiarowym błędów opóźnień i przetwarzania
Composing of delay errors and measurement system processing errors
Autorzy:
Żurkowski, R.
Powiązania:
https://bibliotekanauki.pl/articles/152143.pdf
Data publikacji:
2008
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
błąd opóźnienia
składanie błędów
model propagacji błędów
delay error
errors composing
propagation errors model
Opis:
W artykule scharakteryzowano typowe przyczyny powstawania opóźnień w systemach pomiarowych i ich wpływ na błędy danych pomiarowych. W postaci histogramu przedstawiono wyniki pomiarów opóźnień wykonanych w przykładowym systemie. W artykule umieszczono model propagacji błędów w systemie uwzględniający opóźnienia. Model propagacji błędów stanowi podstawę do wyznaczenia niepewności wyników pomiarów wykonywanych w systemie.
This article characterize typical reasons of generations of delays in measuring systems and influence on errors measuring data. It present results of measurements of delays executed in exemplary system in the histogram form. In article place model of propagation of error in system taking into consideration delay. Model of propagation of error presents base for assignment of uncertainty in system.
Źródło:
Pomiary Automatyka Kontrola; 2008, R. 54, nr 6, 6; 368-370
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulations of a multicomponent mixture in the reflux classifier todemonstrate the effect of dispersion coefficient on its internal state
Autorzy:
Syed, Naveedul Hasan
Khan, Naseer Ahmed
Habib, Muddasar
Powiązania:
https://bibliotekanauki.pl/articles/1449637.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
continuum model
dispersion fluxes
ecart probable error
segregation
slip velocity
Opis:
In this study, influence of the dispersion coefficient on the internal state of a multicomponent mixture comprising 35 types of particle species with five different sizes ranging -2.0+0.25 mm and seven different densities, 1400 to 2000 kg/m3, in a reflux classifier under continuous process conditions is presented. Simulations were performed to study the effect of dispersion coefficient on the separation density, D50, separation efficiency, Ep, and solid volume fraction of the multicomponent mixture. The simulation results provided a good agreement with the published experimental results of the reflux classifier, operated at full scale in 2005, for a relatively high value of the dispersion coefficient, 0.0030 m2/s, and a relatively small value of the dispersion, 0.00030 m2/s, in the fluidization and inclined sections of the device, respectively. Moreover, different fixed values of the dispersion coefficient and a published proposed model of the dispersion coefficient were incorporated in the model to examine variations in the system and were compared with the validated simulation results. It was found that the selected values of the dispersion coefficient had not much effect on the $D_{50}$ values. However, the Ep values changed significantly with changes in the dispersion coefficient values. The smaller values of the dispersion coefficient provided lower values of the Ep that did not match well with the validated simulation results. Furthermore, the variations in the total solid volume fraction within the reflux classifier for different values of the dispersion coefficient has been demonstrated.
Źródło:
Physicochemical Problems of Mineral Processing; 2020, 56, 1; 76-88
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Uncertainty analysis of the kinetic model of natural gas combustion in IC Engine
Autorzy:
Mansha, M.
Naqvi, J. H.
Powiązania:
https://bibliotekanauki.pl/articles/778303.pdf
Data publikacji:
2012
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
model kinetyczny
analiza niepewności
analiza błędów
zanieczyszczenia
kinetics model
uncertainty analysis
error analysis
pollutants
Opis:
The purpose of this analysis is to determine the uncertainties originating due to the kinetic parameters of the rate of a reaction proposed kinetic model. A kinetic model consisting of 208 reaction steps and 73 species was adopted for analysis. In the required uncertainty analysis, the accuracy of approximate models, generated by the Chemkin 4.1.1 for pollutant species, is determined. The reactions which contribute the uncertainty in the output concentrations of the pollutnats species formed in the combustion chamber were identifi ed. The percentage contribution to the uncertainty in the output concentrations of pollutants were also determined.
Źródło:
Polish Journal of Chemical Technology; 2012, 14, 1; 1-4
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zagadnienie jakości numerycznych modeli terenu
The quality of digital terrain models
Autorzy:
Hejmanowska, B.
Drzewiecki, W.
Kulesza, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/130368.pdf
Data publikacji:
2008
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
błąd
niepewność
wiarygodność
numeryczny model terenu
NMT
error
uncertainty
reliability
digital terrain model (DTM)
DEM
Opis:
Numeryczne modele terenu (NMT) stanowią bardzo istotną warstwę informacyjną w systemach GIS. Wiele analiz przestrzennych wykonuje się z ich wykorzystaniem - poczynając od prostych zapytań, poprzez analizę map pochodnych NMT: map nachyleń i ekspozycji, aż do wykorzystania NMT w skomplikowanym modelowaniu zjawisk zachodzących w środowisku. Analizy te można przeprowadzać (i tak robi się najczęściej) tzw. metodą twardą, czyli nie biorąc pod uwagę wiarygodności danych źródłowych, lub metodą miękką - biorąc pod uwagę różne aspekty dokładnościowe danych źródłowych oraz przyjmując miękkie, rozmyte warunki analizy. Ostatnio coraz większą uwagę zaczyna się przywiązywać do wiarygodności wyników analiz GIS i w związku z tym częściej pojawia się problematyka jakości i dokładności danych źródłowych w systemach GIS. Problemem jest też fakt, iż producenci oprogramowania GIS rzadko rozwijają w nim wsparcie dla analiz dokładnościowych. Niniejsza publikacja ma charakter przeglądu literatury tyczącej się określania i modelowania dokładności numerycznych modeli terenu. Publikacja została przygotowana w ramach projektu AGH nr: 11.11.150.949.
The Digital Elevation Model is one of very important layers in GIS systems. Many spatial queries are made with the use of DEM, from simple questions to derivatives such as slope, aspect and viewshed maps to complicated modelling of environmental phenomenon. The analyses can be made (and that is the usual case) by the so called hard method, which does not take into account the reliability of source data, or with the fuzzy method, which takes into consideration multiple accuracy aspects. Recently, more and more attention has been paid to the GIS analyses credibility, which makes the accuracy issues more important than ever. Another problem is that GIS software only occasionally delivers tools for algorithm and function accuracy analysis. The paper provides a review of literature concerning the statement and modelling of inaccuracy in Digital Elevation Models. The work was supported by AGH project No. 11.11.150.949.
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2008, 18a; 163-175
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Small Area Prediction under Alternative Model Specifications
Autorzy:
Erciulescu, Andreea L.
Fuller, Wayne A.
Powiązania:
https://bibliotekanauki.pl/articles/465723.pdf
Data publikacji:
2016
Wydawca:
Główny Urząd Statystyczny
Tematy:
unit level model
parametric bootstrap
double bootstrap
measurement error
auxiliary information
Opis:
Construction of small area predictors and estimation of the prediction mean squared error, given different types of auxiliary information are illustrated for a unit level model. Of interest are situations where the mean and variance of an auxiliary variable are subject to estimation error. Fixed and random specifications for the auxiliary variables are considered. The efficiency gains associated with the random specification for the auxiliary variable measured with error are demonstrated. A parametric bootstrap procedure is proposed for the mean squared error of the predictor based on a logit model. The proposed bootstrap procedure has smaller bootstrap error than a classical double bootstrap procedure with the same number of samples.
Źródło:
Statistics in Transition new series; 2016, 17, 1; 9-24
1234-7655
Pojawia się w:
Statistics in Transition new series
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of the publicly available digital terrain model provided by the head office of geodesy and cartography with GNSS satellite measurement
Porównanie powszechnie dostępnego Numerycznego Modelu Terenu udostępnianego przez Główny Urząd Geodezji i Kartografii z pomiarem satelitarnym GNSS
Autorzy:
Zygmunt, Mariusz
Boduszek, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/2124659.pdf
Data publikacji:
2022
Wydawca:
Uniwersytet Rolniczy im. Hugona Kołłątaja w Krakowie
Tematy:
digital terrain model
point cloud
DTM error
GNSS
NMT
chmura punktów
błąd NMT
model numeryczny terenu
Opis:
Due to the ever-better accessibility of the digital terrain model (DTM), it is enjoying growing popularity as a source of information about the surrounding world. It became even more approachable when DTM data covering the whole of Poland was made available free of charge on the Geoportal website. The GRID with a resolution of 1 meter per 1 meter covers virtually the entire country. The data on the Geoportal does not only refer to the measurements processed into a grid of squares, but also includes measurement data. They can be accessed through a systematic division into section sheets in the 1992 system. The paper presents research on assessing the accuracy of these publicly available data, compared to measurements obtained with the GNSS observations. The analysis involved data directly from the measurement device, not yet processed into a grid of squares. As part of the research, the height of 3 objects was compared. It was decided to measure the terrain profiles. To get as close as possible to the source data provided at the Geoportal website, the selected points of profiles previously identified in the point cloud were measured. This approach freed the final results from the need for height interpolation for the data selected for analysis. As result, the potential source of errors in such an approach was eliminated. Although during a classical profile measurement with this technology the selection of points would certainly be different, for research purposes this approach seems optimal. For this reason, in addition to the expected deviations resulting from the height differences of the tested points, deviations from the data from the point cloud of the XY coordinates, related to the adopted technology, are also presented.
Numeryczny model terenu (NMT) jako źródło informacji o otaczającym nas świecie wraz z dostępem do niego staje się coraz bardziej powszechny. Korzystanie z niego stało się jeszcze prostsze w momencie udostępnienia nieodpłatnie danych NMT obejmujących całą Polskę na stronach Geoportalu. Siatka GRID o rozdzielczości 1 metr na 1 metr pokrywa praktycznie cały kraj. Dane zawarte na stronach Geoportalu nie dotyczą tylko przetworzonych pomiarów do siatki kwadratów, ale zawierają także dane pomiarowe. Dostęp do nich jest możliwy poprzez usystematyzowany podział na arkusze sekcyjne w układzie 1992. Artykuł przedstawia prace badawcze polegające na ocenie dokładności tych ogólnodostępnych danych w porównaniu z pomiarem uzyskanym za pomocą obserwacji GNSS. Analizie poddano dane pochodzące bezpośrednio z pomiaru, nie przetworzone do siatki kwadratów. W ramach badań przeprowadzono porównanie wysokości dla 3 obiektów. Zdecydowano się na pomiar profili terenu. Aby podczas badań maksymalnie zbliżyć się do danych źródłowych udostępnionych na stronach Geoportalu, zdecydowano się na pomiar wybranych punktów profili zidentyfikowanych wcześniej na chmurze punktów. Tego typu podejście uwolniło wyniki końcowe z potrzeby interpolacji wysokości dla wybranych do analizy danych. Skutkowało to wyeliminowaniem potencjalnego źródła błędów wynikających z takiego podejścia. Co prawda podczas klasycznego pomiaru profili tą technologią, wybór punktów byłby z pewnością inny, jednak dla celów badawczych takie podejście wydaje się optymalne. Z tego powodu oprócz oczekiwanych odchyłek wynikających z różnic wysokości dla badanych punktów, przedstawiono także odchyłki względem danych pochodzących z chmury punktów dla współrzędnych XY, wynikające z przyjętej technologii.
Źródło:
Geomatics, Landmanagement and Landscape; 2022, 1; 103--116
2300-1496
Pojawia się w:
Geomatics, Landmanagement and Landscape
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
ISO 19113:2002 with reference to digital terrain models
Norma ISO 19113:2002 w odniesieniu do numerycznych modeli terenu
Autorzy:
Kulesza, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/385829.pdf
Data publikacji:
2011
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
jakość
ISO
błąd
wiarygodność
numeryczny model terenu
NMT
quality
error
credibility
digital terrain model (DTM)
DTM
Opis:
The ISO 19113:2002 standard establishes the principles for quantifying the quality of geographic data and specifies components for reporting quality information. It also provides an approach to organizing information about data quality. According to it, the issue of quality is a multifactor problem and includes such elements like: completeness, logical consistency, positional accuracy, temporal accuracy, thematic accuracy. Its principles are applicable to digital geographic data, however they can be extended to many other forms of geographic data such as maps, charts and textual documents. For data users it answers a crucial question whether or not specific geographic data is of sufficient quality for their particular application. Additionally it may be used for describing quality requirements. Digital Terrain Models (DTM) are a very important information layer in GIS applications. Multiple spatial analyses are being held with the usage of DTM – starting from simple queries, through map analysis derived from DTM: slope and aspect maps and finally finding application in complex modelling of environmental phenomenon. Recently more and more attention is paid to the GIS analysis credibility, which makes the quality issues and data sets accuracy more important then ever. Owing to fact that quality is an extensive concept, one criterion assessment cannot be applied to every possible situation. Domain of the problem as well as the goals of specific application need to be recognized and the acquired knowledge must be confronted with the information regarding possessed data. It is in connection with the reliability and fitness to use issue which states that every certain DTM is appropriate only for some set of applications, and the user must be aware of that. It is important for the user to have the sense of purpose. Whether a DTM is of sufficient quality for particular application depends on the data itself and on the purpose of its usage. In current work an attempt was made to discuss the issues regarding DTM quality in the light of guidelines included in ISO 19113:2002 Standard. Practical example of quality assessment of few chosen DTM obtained from different sources was introduced.
Norma ISO 19113:2002 ustala zasady opisywania jakości danych geograficznych i definiuje komponenty służące raportowaniu informacji o jakości. Dostarcza również narzędzi do organizowania informacji o jakości. Według niej problem jakości jest zagadnieniem wieloczynnikowym i obejmuje takie elementy, jak: kompletność, spójność logiczna, dokładność położenia, dokładność czasowa, dokładność tematyczna. Jej zasady mają zastosowanie do cyfrowych danych geograficznych, ale mogą być wykorzystane w odniesieniu do wielu innych form danych geograficznych, takich jak mapy, wykresy oraz dokumenty tekstowe. Odpowiada ona na jakże ważne dla użytkownika pytanie, czy dane geograficzne mają wystarczającą jakość dla konkretnego zastosowania. Dodatkowo norma umożliwia opisywanie zagadnień jakościowych. Numeryczne modele terenu (NMT) stanowią bardzo istotną warstwę informacyjną w systemach GIS. Wiele analiz przestrzennych wykonuje się z ich wykorzystaniem – poczynając od prostych zapytań, poprzez analizę map pochodnych NMT: map nachyleń i ekspozycji, aż po skomplikowane modelowanie zjawisk zachodzących w środowisku. Ostatnio coraz większą wagę zaczyna się przywiązywać do wiarygodności wyników analiz GIS i w związku z tym częściej pojawia się problematyka jakości i dokładności danych źródłowych w systemach GIS. Z uwagi na fakt, iż jakość jest pojęciem szerokim, nie można zastosować jednego kryterium oceny do wszystkich możliwych sytuacji. Należy poznać dziedzinę problemu i scharakteryzować cele, następnie wiedza ta musi zostać skonfrontowana z informacjami na temat posiadanych danych. Ma to związek z przydatnością danego NMT do konkretnego zastosowania (fitness to use), polegającą na tym, że dany model jest właściwy dla pewnego przedziału zastosowań i użytkownik musi mieć tego świadomość. Istotne z punktu widzenia użytkownika jest prawidłowe wyczucie celu zastosowania. To, czy NMT ma wystarczającą dokładność dla konkretnego zastosowania, zależy od samych danych go tworzących, jak również od celu, w jakim ma zostać użyty. W niniejszej publikacji podjęto próbę omówienia zagadnienia jakości NMT według wytycznych zawartych w normie ISO 19113:2002. Przedstawiono także praktyczny przykład oceny jakości wybranych arkuszy NMT, pochodzących z różnych źródeł.
Źródło:
Geomatics and Environmental Engineering; 2011, 5, 1; 61-72
1898-1135
Pojawia się w:
Geomatics and Environmental Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measuring the Quality of Multivariate Statistical Models
Wybrane metody pomiaru jakości modeli statystycznych
Autorzy:
Trzęsiok, Michał
Powiązania:
https://bibliotekanauki.pl/articles/656773.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
jakość modelu
dopasowanie
błąd predykcji
model quality
goodness of fit
prediction error
Opis:
Bardzo ważnym elementem procesu modelowania statystycznego jest etap oceny jakości zbudowanego modelu. W zależności od wykorzystanej metody istnieje wiele różnych podejść do pomiaru jakości modelu. Pomiar ten może skupiać się na dopasowaniu do danych empirycznych albo może przede wszystkim uwzględniać zdolności prognostyczne modelu. Mierniki mogą być absolutne albo względne. Zestaw mierników jakości modelu obejmuje liczną grupę propozycji, z których analityk musi wybrać najodpowiedniejszy do danej sytuacji. W artykule przedstawiono zestawienie mierników jakości modelu oraz sugestię używania innych mierników jakości na etapie wyboru wariantu modelu oraz na etapie oceny jakości modelu końcowego.
Assessing the quality of a statistical model is very important, since it is crucial for the utility of the modelling process’ outcome. There are many different ways of measuring statistical models’ quality. Some of the measures represent a “goodness of fit” approach, some are “prediction ability” orientated. Among them there are absolute and relative measures. It is a researcher’s decision, which model quality measure is the most adequate for the given task. In the paper we present an overview of statistical models’ quality measures and a suggestion of using different ones during the model type selection stage and the stage of assessing the quality of the final model.
Źródło:
Acta Universitatis Lodziensis. Folia Oeconomica; 2018, 6, 339; 99-100
0208-6018
2353-7663
Pojawia się w:
Acta Universitatis Lodziensis. Folia Oeconomica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Model of Surface and Quasi-Spherical Sea Noise and Its Application to Analysis of DIFAR Systems
Autorzy:
Rudnicki, Mariusz
Salamon, Roman
Marszal, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/2097703.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
numerical model
surface sea noise
quasi-spherical sea noise
DIFAR
bearing error
Opis:
Various types of passive sonar systems are used to detect submarines. These activities are complex and demanding. Therefore, computer simulations are most often used at the design stage of these systems. For this reason, it is also necessary to simulate the acoustic ambient noise of the sea. The article proposes a new numerical model of surface and quasi-spherical sea noise and presents its statistical parameters. The results of the application of the developed noise model to analyse the received signals of the DIFAR1 sonobuoy are also presented.
Źródło:
Archives of Acoustics; 2021, 46, 4; 591-604
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Trade liberalization policy and competitiveness of cocoa beans exports in Nigeria (1961-2017)
Autorzy:
Obi-Egbedi, O.
Hussayn, J.A.
Oluwatayo, I.B.
Powiązania:
https://bibliotekanauki.pl/articles/2080922.pdf
Data publikacji:
2021
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
cocoa
competitiveness
market share
trade liberalization policy and vector error
correction model
Opis:
The cocoa sector in Nigeria has experienced decline in production, yield, exports coupled with its inability to attain global standards and targets and, gradual loss of competitiveness at the world market. Trade liberalization was government’s panacea to the sector’s problem although, cocoa competitiveness remains an issue since liberalization. Therefore, the relationship between trade liberalization policy and competitiveness of Nigeria’s cocoa exports was examined in this study using data for the period 1961-2017. Cocoa market share was used to measure competitiveness while analytical tools employed were: ADF test, Johansen co-integration test and the vector error correction model (VECM). Market share, quantity of cocoa export and inflation rate were stationary at original level while others, at first difference. The co-integration test showed seven co-integrating equations. Trade liberalization policy was found to be an important driver of competitiveness. In addition, area harvested, production quantity and export quantity positively influenced competitiveness while world price of cocoa, interest rate on agricultural loans, exchange rate and trade liberalization influenced negatively. Therefore, appropriate trade policy formulation and implementation is recommended while, specific attention should be paid to monetary policies and cocoa production by the government.
Źródło:
Zeszyty Naukowe Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie. Problemy Rolnictwa Światowego; 2021, 21[36], 1; 4-15
2081-6960
Pojawia się w:
Zeszyty Naukowe Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie. Problemy Rolnictwa Światowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Error mitigation algorithm based on bidirectional fitting method for collision avoidance of Unmanned Surface Vehicle
Autorzy:
Song, L.
Chen, Z.
Mao, Y.
Dong, Z.
Xiang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/260298.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
Unmanned Surface Vehicle
position prediction
error mitigation
autoregressive model
particle swarm optimization (PSO)
Opis:
Radars and sensors are essential devices for an Unmanned Surface Vehicle (USV) to detect obstacles. Their precision has improved significantly in recent years with relatively accurate capability to locate obstacles. However, small detection errors in the estimation and prediction of trajectories of obstacles may cause serious problems in accuracy, thereby damaging the judgment of USV and affecting the effectiveness of collision avoidance. In this study, the effect of radar errors on the prediction accuracy of obstacle position is studied on the basis of the autoregressive prediction model. The cause of radar error is also analyzed. Subsequently, a bidirectional adaptive filtering algorithm based on polynomial fitting and particle swarm optimization is proposed to eliminate the observed errors in vertical and abscissa coordinates. Then, simulations of obstacle tracking and prediction are carried out, and the results show the validity of the algorithm. Finally, the method is used to simulate the collision avoidance of USV, and the results show the validity and reliability of the algorithm.
Źródło:
Polish Maritime Research; 2018, 4; 13-20
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A fault tree-based approach for aviation risk analysis considering mental workload overload
Autorzy:
Che, Haiyang
Zeng, Shengkui
You, Qidong
Song, Yueheng
Guo, Jianbin
Powiązania:
https://bibliotekanauki.pl/articles/2038044.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
risk analysis
human error
mental workload overload
multiple resources model
fault tree analysis
Opis:
Many lives and aircrafts have been lost due to human errors associated with mental workload overload (MWLOL). Human errors are successfully considered in existing Fault Tree Analysis (FTA) methods. However, MWLOL is considered through Performance Shaping Factors indirectly and its information is hidden in FT construction, which is not conducive to analyze the root causes of human errors and risks. To overcome this difficulty, we develop a risk analysis method where Multiple Resources Model (MRM) is incorporated into FTA methods. MRM analyzes mental workload by estimating the resources used during performing concurrent tasks, probably including abnormal situation handling tasks introduced by basic events in FT. Such basic events may cause MWLOL and then trigger corresponding human error events. A MWLOL gate is proposed to describe MWLOL explicitly and add these new relationships to traditional FT. This new method extends previous FTA methods and provides a more in-depth risk analysis. An accident, a helicopter crash in Maryland, is analyzed by the proposed method.
Źródło:
Eksploatacja i Niezawodność; 2021, 23, 4; 646-658
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
ROBUSTNESS OF TWEEDIE MODEL OF RESERVES WITH RESPECT TO DISTRIBUTION OF SEVERITY OF CLAIMS
Autorzy:
Boratyńska, Agata
Juszczak, Dorota
Powiązania:
https://bibliotekanauki.pl/articles/453337.pdf
Data publikacji:
2015
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Katedra Ekonometrii i Statystyki
Tematy:
loss reserves
Tweedie model
Poisson and gamma distribution
ε-contamination
generalized linear model
mean square error
bias
prediction
Opis:
The aim of the work is to discuss the robustness of estimation procedures and robustness of prediction in Tweedie's compound Poisson model. This model is applied to the claim reserving problem. The quality of parameter estimators and predictors is studied when the distribution of severity of claims is disturbed. The ε-contamination class of distributions is considered. The example, where errors of estimators are large is presented. The simulation methods, using the R programming environment, are applied.
Źródło:
Metody Ilościowe w Badaniach Ekonomicznych; 2015, 16, 1; 53-74
2082-792X
Pojawia się w:
Metody Ilościowe w Badaniach Ekonomicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena przydatności modelu ekonometrycznego do badania zmian dynamiki gospodarki województwa śląskiego
Evaluation of use of the econometric model for the research on changes in the dynamics of the Silesian voivodship’s economy
Autorzy:
Biolik, Józef
Powiązania:
https://bibliotekanauki.pl/articles/590484.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Ekonomiczny w Katowicach
Tematy:
Błąd prognozy
Model ekonometryczny
Pierwiastek charakterystyczny
Prognoza
Równanie końcowe
Character-istic root
Econometric model
Final equation
Forecast error
Forecast
Opis:
Celem artykułu jest prognostyczna weryfikacja modelu gospodarki województwa śląskiego oraz ocena dynamicznych własności gospodarki na podstawie pierwiastków charakterystycznych równania końcowego. Na podstawie danych z lat 1999-2011 oszacowano parametry modelu charakteryzującego gospodarkę województwa śląskiego. Na bazie obliczonych prognoz na jeden okres naprzód oceniono wartość prognostyczną modelu. Do oceny dynamicznych własności modelu wykorzystano pierwiastki charakterystyczne równania końcowego.
The purpose of the article is a prognostic verification of Silesian voivodship’s economy model and the evaluation of dynamic properties of economy on the basis of characteristic roots of final equation. The parameters of a model characterizing the economy of the Silesian voivodship were estimated on the basis of the data from the period of 1999-2011. The prognostic value of the model was estimated on the basis of prognoses calculated for one period. The evaluation of dynamic properties of the model was based on the characteristic roots of final equation.
Źródło:
Studia Ekonomiczne; 2015, 220; 9-20
2083-8611
Pojawia się w:
Studia Ekonomiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena dokładności numerycznego modelu terenu zbudowanego z danych bezpośrednich
En evaluation in digital terrain model accuracy using direct survey data
Autorzy:
Suchocki, C.
Damięcka-Suchocka, M.
Błoch, P.
Stec, M.
Powiązania:
https://bibliotekanauki.pl/articles/341438.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Przyrodniczy we Wrocławiu
Tematy:
numeryczny model terenu NMT
GRID
TIN
błąd RMS
parametry statystyczne
digital terrain model (DTM)
grid
RMS error
statistical coefficients
Opis:
Podstawowym i szeroko rozpowszechnionym źródłem informacji o ukształtowaniu terenu jest Numeryczny Model Terenu (NMT). Jest on wykorzystywany w wielu dziedzinach naukowych i gospodarczych. Najczęściej powierzchnię terenu prezentuje się w postaci nieregularnej siatki trójkątów (TIN) lub regularnej siatki kwadratów (GRID). Współcześni użytkownicy NMT zgłaszają zapotrzebowanie na coraz wierniejsze zobrazowanie rzeczywistego ukształtowania terenu. Istotnym zagadnieniem staje się więc porównywanie jakości i dokładności numerycznego modelu TIN z modelem GRID. W pracy dokonano oceny dokładności Numerycznych Modeli Terenu zbudowanych z danych bezpośrednich. Dane te pozyskano z pomiaru techniką GPS RTK terenu o powierzchni około jednego hektara i deniwelacji około 12 m. Do badań wybrano model typu TIN oraz dwa modele typu GRID zbudowane algorytmami interpolacyjnymi: Natural Neighbor i Spline. Ocenę dokładności wszystkich modeli przeprowadzono na podstawie wartości błędu RMS oraz wybranych parametrów statystycznych.
A Digital Terrain Model (DTM) is an important, widely used source of information about the shape of the Earth which is integral to many scientific and economic fields. The surface of an area of land is usually represented in the form of a Triangular Irregular Network (TIN) or a regular grid of squares (GRID). Current users of DTM have been expressing a need for more accurate representations of physical land surfaces. Comparisons of the quality and accuracy of TIN and GRID models has become an important topic of interest. This paper presents an evaluation of the accuracy of Digital Terrain Models based on direct survey data. Data were gathered from GPS RTK measurements of a 1-hectare area with about 12m of elevation. One TIN and two GRID models were built using interpolation algorithms: Natural Neighbor and Spline. The assessment of the accuracy of the models was based on errors in the value of the RMS and selected statistical coefficients.
Źródło:
Acta Scientiarum Polonorum. Geodesia et Descriptio Terrarum; 2013, 12, 3; 17-26
1644-0668
Pojawia się w:
Acta Scientiarum Polonorum. Geodesia et Descriptio Terrarum
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CFD simulation and experimental study of ultrasonic flowmeters
Autorzy:
Roman, V.
Matiko, F.
Fedoryshyn, R.
Powiązania:
https://bibliotekanauki.pl/articles/115645.pdf
Data publikacji:
2017
Wydawca:
Fundacja na Rzecz Młodych Naukowców
Tematy:
ultrasonic flowmeter
mathematical model
flow rate
CFD
disturbed flow
error
przepływomierz ultradźwiękowy
model matematyczny
prędkość przepływu
zaburzenie przepływu
błąd
Opis:
This paper deals with CFD simulation and experimental study of ultrasonic flowmeters. A mathematical model of an ultrasonic flowmeter (USM) was built for studying the errors of flow measurement in disturbed flows. The method of defining the position coordinates of the acoustic paths and their weighting factors was improved based on the Gauss-Jacobi method of integration (i.e. the weighting function was improved) which provided the possibility to raise the accuracy of the turbulent flow velocity integration. The effectiveness of the improved method was verified using the Salami functions. New methodology for improving the mathematical model of USM is proposed. According to this methodology the dependence of the calibration factor on the Reynolds number is introduced into the model. A technique for studying the errors of USM in disturbed flows was developed on the basis of the proposed methodology. The developed technique was verified by comparing the CFD simulation results for a 3D model of an acting USM with the experimental results for this meter obtained by means of a reference test rig. The deviation of the simulation results from the obtained experimental data is not more than 1 %. Recommendations on defining the pipe straight lengths for the double-path chordal flowmeters were developed on the basis of the investigation results.
Źródło:
Challenges of Modern Technology; 2017, 8, 1; 37-43
2082-2863
2353-4419
Pojawia się w:
Challenges of Modern Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Iterative-interpolation algorithms for L2 model reduction
Autorzy:
Krajewski, W.
Viaro, U.
Powiązania:
https://bibliotekanauki.pl/articles/970959.pdf
Data publikacji:
2009
Wydawca:
Polska Akademia Nauk. Instytut Badań Systemowych PAN
Tematy:
linear systems
model reduction
output-error minimization
L2 norm
Krylov subspaces
Arnoldi's algorithm
Opis:
This paper is concerned with the construction of reduced-order models for high-order linear systems in such a way that the L2 norm of the impulse-response error is minimized. Two convergent algorithms that draw on previous procedures presented by the same authors, are suggested: one refers to s-domain representations, the other to time-domain state-space representations. The algorithms are based on an iterative scheme that, at any step, satisfies certain interpolation constraints deriving from the optimality conditions. To make the algorithms suitable to the reduction of very large-scale systems, resort is made to Krylov subspaces and Arnoldi's method. The performance of the reduction algorithms is tested on two benchmark examples.
Źródło:
Control and Cybernetics; 2009, 38, 2; 543-554
0324-8569
Pojawia się w:
Control and Cybernetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimality system POD and a-posteriori error analysis for linear-quadratic problems
Autorzy:
Volkwein, S.
Powiązania:
https://bibliotekanauki.pl/articles/206100.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Instytut Badań Systemowych PAN
Tematy:
optimal control
model reduction
proper orthogonal decomposition
a-posteriori error estimates
optimality system POD
Opis:
In this paper an abstract linear-quadratic optimal control problem governed by an evolution equation is considered. To solve this problem numerically a reduced-order approach based on proper orthogonal decomposition (POD) is applied. The error between the POD suboptimal control and the optimal control of the original problem is controlled by an a-posteriori error analysis. However, if the POD basis has bad approximation properties, a huge number of POD basis function is required to solve the reduced-order problem with the desired accuracy. To overcome this problem, optimality system POD (OS-POD) is utilized, where the POD basis is chosen with respect to the optimization criteria.
Źródło:
Control and Cybernetics; 2011, 40, 4; 1109-1124
0324-8569
Pojawia się w:
Control and Cybernetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Błędy i korekcja błędów modeli w aplikacjach przemysłowych
Errors and correction of model errors in industrial applications
Autorzy:
Kornacki, S.
Powiązania:
https://bibliotekanauki.pl/articles/257478.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
model procesów
błąd
monitorowanie
diagnostyka
kocioł energetyczny
process models
error
monitoring
diagnostics
power boiler
Opis:
W referacie omówiono zagadnienia związane ze stosowaniem modeli procesów w aplikacjach przemysłowych, zwłaszcza odnoszące się do błędów modeli, ich zmienności w czasie i możliwości korekcji. Przedstawiono algorytm korekcji wyjść neuronowych modeli zanieczyszczeń emitowanych przez kotły energetyczne, który został zastosowany w wirtualnym analizatorze spalin. Algorytm minimalizuje błąd wartości średniej i wartości skutecznej. Przedstawiono wyniki wieloletniej eksploatacji analizatora świadczące o skuteczności opisanego algorytmu oraz obrazujące wielkość i charakter zmian właściwości modelowanych procesów przemysłowych Przedstawiono modyfikację algorytmu, która umożliwia jego stosowanie w przypadkach, gdy modele są źródłami sygnałów wzorcowych w zadaniach diagnozowania korzystających z metody residuów. Wskazano warunki stosowania algorytmu.
The article presents issues concerning the applicability of process models under industrial conditions. It focuses on model errors, their time variability, and their ability to introduce necessary corrections. It presents an algorithm dedicated to output error corrections for neural net models applied to assess contamination produced by power plant boilers. This model has been successfully applied to the virtual exhaust analyser. This algorithm reduces the mean value and effective value errors. The article presents the results of long term (xxx years) application of this model. It focuses on its efficiency while deployed to large-scale variable industrial processes. Variability of processes under consideration may be large; therefore, it has to be taken into account while planning to deploy models of this kind. For that reason, an algorithm modification was developed in order to make this art of models applicable to the cases where models themselves may be a source of master signals for tasks such as technical diagnostics based on the residual method. Although the group of processes successfully covered by this approach is limited, it is wide enough to make it practically viable. Important advantages of this algorithm are its simplicity of practical deployment and its long-term stable work without human operator's intervention.
Źródło:
Problemy Eksploatacji; 2011, 2; 99-106
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of international trade on employment in orange industry of South Africa
Autorzy:
Molepo, Nkoti Solly
Belete, Abenet
Hlongwane, Jan
Powiązania:
https://bibliotekanauki.pl/articles/1886408.pdf
Data publikacji:
2021-07-04
Wydawca:
Uniwersytet Przyrodniczy w Poznaniu. Wydawnictwo Uczelniane
Tematy:
South African orange industry
employment, wages
international trade
Johansen cointegration
vector error
correction model
Opis:
The purpose of the study is to analyse the long-run and short-run dynamic relations amongst total employment (lnEMPGt), export output (EXPOt) and import output (IMPOt) from 1990 to 2018, by applying a time-series analysis. The study adopts the secondary data for total employment from the Citrus Growers Association of South Africa, while both export and import output were sourced from the Global Trade Atlas. The multivariate cointegration approach is adopted in the study to identify any causal relationships amongst the concerned variables. The chosen optimum lag selection criterion was the Akaike Information Criterion (AIC) due to its association dependence on the log-likelihood ratio. The third lag was selected for the entire analysis. The results from the cointegration test and the Vector Error Correction Model (VECM) suggest a positive long-run effect between total employment and export output, while import output is negatively associated with total employment. The adjustment term of lnEMPGt, EXPOt and IMPOt suggests that the previous year’s errors are corrected for the current year at a convergence speed of 0.002, 1.11 and 25.37 percentage points, respectively. The results of the Granger causality test show that there are bidirectional causality effects between export output and total employment in the long run, while there are no causality effects between import output and total employment. The overall conclusion is that export outputs positively impact employment, while import outputs impact it negatively in the South African orange industry.
Źródło:
Journal of Agribusiness and Rural Development; 2021, 60, 2; 193-201
1899-5241
Pojawia się w:
Journal of Agribusiness and Rural Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Niektóre błędy wyznaczania parametrów modelu reologicznego na podstawie testu relaksacji naprężeń na przykładzie bulwy ziemniaka
Selected errors of rheological model parameters determination evaluated on the basis of stress relaxation test for potato tubers
Autorzy:
Stropek, Z.
Gołacki, K.
Powiązania:
https://bibliotekanauki.pl/articles/291360.pdf
Data publikacji:
2005
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
test relaksacji naprężeń
współczynnik sprężystości
lepkość dynamiczna
model Maxwella
błąd
stress relaxation test
elastic coefficient
viscosity coefficient
Maxwell model
error
Opis:
Artykuł prezentuje procedury oszacowania niektórych błędów wyznaczania parametrów modelu Maxwella opisującego zachowanie się walcowych próbek w teście relaksacji naprężeń na przykładzie tkanki ziemniaka odmiany Irga. Wyznaczono błędy zarówno toru pomiarowego jak i wynikające z niedokładności wykonania próbek. Uwzględniono także zmienny w funkcji siły reakcji próbki błąd systematyczny przy wyliczaniu współczynników sprężystości i lepkości dynamicznej modelu.
This paper presents the estimation procedures of Maxwell’s model parameters describing the behaviour of potato samples during stress relaxation test. Into consideration were taken errors resulting from an inaccuracy of sample preparation, as well as the used measurement device (defined, limited precision). Moreover systematic error depending on sample reaction force, at calculation of elastic and viscosity coefficients was taken into account.
Źródło:
Inżynieria Rolnicza; 2005, R. 9, nr 4, 4; 291-297
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of parametric models with a priori knowledge of process properties
Autorzy:
Janiszowski, K. B.
Wnuk, P.
Powiązania:
https://bibliotekanauki.pl/articles/330128.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
absolute error measure
constrained parameters estimation
parametric MISO models
błąd bezwzględny
estymacja parametrów
model parametryczny
Opis:
An approach to estimation of a parametric discrete-time model of a process in the case of some a priori knowledge of the investigated process properties is presented. The knowledge of plant properties is introduced in the form of linear bounds, which can be determined for the coefficient vector of the parametric model studied. The approach yields special biased estimation of model coefficients that preserves demanded properties. A formula for estimation of the model coefficients is derived and combined with a recursive scheme determined for minimization of the sum of absolute model errors. The estimation problem of a model with known static gains of inputs is discussed and proper formulas are derived. This approach can overcome the non-identifiability problem which has been observed during estimation based on measurements recorded in industrial closed-loop control systems. The application of the proposed approach to estimation of a model for an industrial plant (a water injector into the steam flow in a power plant) is presented and discussed.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2016, 26, 4; 767-776
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Proces predykcji zdarzeń i zjawisk
Rediction process of events and effects
Autorzy:
Ampuła, D.
Powiązania:
https://bibliotekanauki.pl/articles/234942.pdf
Data publikacji:
2012
Wydawca:
Wojskowy Instytut Techniczny Uzbrojenia
Tematy:
predykcja
prognoza
zdarzenie
zjawisko
dokładność
błąd
metoda
model
prediction
prognosis
event
effect
precision
error
method
Opis:
W artykule przedstawiono ogólną definicję procesu predykcji zdarzeń i zjawisk. Określono schemat klasyfikacyjny rodzajów predykcji oraz przedstawiono schemat główny stosowanych metod predykcji, który jest zamieszczany w wielu publikacjach literatury. Stwierdzono, że główną przesłanką rozróżniania predykcji jest jej horyzont stosowania. Określono także dokładność procesu predykcji z jego błędami ex post i ex ante. Przedstawiono typowy model ekonometryczny predykcji, którego konstrukcja stanowi podstawę wnioskowania w przyszłość. Jego pięć głównych etapów charakteryzuje w pełni ten model, który posiada szereg zalet prakseologicznych, takich jak poprawność, ścisłość i uniwersalność. Rozpatrzono klasyczne i zmodyfikowane założenia teorii predykcji. Dokonano analizy tych założeń oraz określono niektóre zasady predykcji ilościowej. Predykcja ta kończy się obliczeniem prognozy ilościowej, czyli podaniem wartości liczbowej w postaci pojedynczej wartości, przedziału liczbowego lub wektora liczb. Na końcu artykułu przedstawiono zwięzłe wnioski dotyczące procesu predykcji zdarzeń i zjawisk.
In the paper a general definition of prediction process of events and effects was presented. There was also defined a classifying scheme of prediction sorts and there was presented the main scheme of applied methods of prediction, which is published in many publications of the literature. It was stated that the main premise of prediction distinguishing is its horizon of application. A precision of prediction process was also defined with its errors ex post and ex ante. A typical econometric prediction model was presented, the construction of which makes up the basis of inference concerning the future. Its five main stages characterize this model fully and it possesses many praxeologic advantages, such as correctness, exactness and generality. Classic and modified foundations of the prediction theory were considered. Analysis of these foundations was conducted and some principles of quantitative prediction were outlined. This prediction leads to calculation of a numerical value in the form of a single value, numerical range or the vector of numbers. Concise conclusions relating to the prediction process of events and effects were presented at the end of the paper.
Źródło:
Problemy Techniki Uzbrojenia; 2012, 41, 122; 29-40
1230-3801
Pojawia się w:
Problemy Techniki Uzbrojenia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System akwizycji danych i model wzorca do weryfikacji dokładności rezystancyjnego systemu tomograficznego
Data Acquisition System and Reference Model Used for Investigation of Resistance Tomography System Verification Method
Autorzy:
Potyrański, P.
Dorozhovets, M.
Powiązania:
https://bibliotekanauki.pl/articles/155050.pdf
Data publikacji:
2006
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
system tomografii elektroimpedancyjnej
weryfikacja
wzorzec
źródła błędów
electroimpedance tomography system
verification
reference model
error sources
Opis:
W artykule przedstawiono praktyczne rozwiązanie i wyniki badań systemu akwizycji danych i metody metrologicznej weryfikacji dokładności rezystancyjnego systemu tomograficznego. Metoda weryfikacji oparta jest na zastosowaniu wzorca (symulującego rozkład rezystywności) złożonego z sieci elementów dyskretnych - rezystorów i kondensatorów. Proponowana metoda pozwala na weryfikację dokładności, selektywną lub sumaryczną, elementów systemu tomograficznego.
In this paper the accuracy verification technique and the data acquisition system are proposed and investigated. The verification method is based on the reference model of conductivity distribution. The reference model is constructed as a network of the discrete resistors and capacitors. Proposed technique permits to verify (jointly or separately) the data acquisition system, reconstruction algorithm and approximation effects. The reference network parameters and the stages of the verification are described.
Źródło:
Pomiary Automatyka Kontrola; 2006, R. 52, nr 12, 12; 26-29
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the Density of Source Data on a Volume Estimation Using DEM
Wpływ gęstości danych źródłowych na określenie objętości przy użyciu DEM
Autorzy:
Sokol, S.
Liptak, M.
Bajtala, M.
Powiązania:
https://bibliotekanauki.pl/articles/319377.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
volume
digital elevation model (DEM)
density of points
interpolation method
relative error
objętość
numeryczny model terenu
gęstość punktów
metoda interpolacji
błąd względny
Opis:
Digital elevation model (DEM) represents an efficient tool for a number of engineering applications. However, decisive for the DEM application is its accuracy, which depends on various factors. The main factors include the surface roughness, the interpolation algorithm, and the accuracy, density and distribution of the source data. This study is devoted to investigating the effect of the source data density on the volume calculation using the grid based DEM. This investigation is provided on the basis of the theoretical surfaces, which are expressed by means of a known mathematical function of the plane coordinates, and also on the experimentally measured surfaces using terrestrial laser scanning. DEMs using data with density from several centimetres to 1 m and using three different interpolation methods were generated and volumes calculated.
Cyfrowy model terenu (digital elevation model – DEM) stanowi skuteczne narzędzie do wielu zastosowań inżynierskich. Decydującym czynnikiem przemawiającym za DEM jest jej dokładność, która zależy od wielu czynników. Głównymi czynnikami są chropowatość powierzchni, algorytm interpolacji oraz dokładność, gęstość i rozkład danych źródłowych. Niniejszy artykuł jest poświęcony zbadaniu wpływu gęstości danych źródłowych na obliczanie objętości przy użyciu siatki opartej na DEM. Badanie to jest przeprowadzone bazując na fundamentach teoretycznych, które wyrażone są przez funkcję matematyczną współrzędnych płaszczyzny, jak również na eksperymentalnie zmierzonych powierzchni przy użyciu naziemnego skaningu laserowego. DEM używająca danych o gęstości od kilku centymetrów do 1 m oraz stosująca trzy różne metody interpolacji została wygenerowana a objętość obliczona.
Źródło:
Inżynieria Mineralna; 2014, R. 15, nr 1, 1; 39-45
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved Estimators of Coefficient of Variation in a Finite Population
Autorzy:
Archana, V.
Aruna Rao, K.
Powiązania:
https://bibliotekanauki.pl/articles/465691.pdf
Data publikacji:
2011
Wydawca:
Główny Urząd Statystyczny
Tematy:
Model based comparison
Coefficient of Variation
Simple Random Sampling Regression estimator
Mean Square Error
Confidence interval
Opis:
Coefficient of Variation (C.V) is a unitless measure of dispersion. Hence it is widely used in many scientific and social investigations. Although a lot of work has been done concerning C.V in the infinite population models, it has been neglected in the finite populations. Many areas of applications of C.V involves the finite populations like the use in official statistics and economic surveys of the World Bank. This has motivated us to propose six new estimators of the population C.V. In finite population studies regression estimators are widely used and the idea is exploited to propose the new estimators. Three of the proposed estimators are the regression estimators of the C.V for the study variable while the other three estimators makes use of the regression estimators of population mean and variance to estimate the ratio , the population C.V for the study variable. The bias and mean square error (MSE) of these estimators were derived for the simple random sampling design. The performance of these estimators is compared using two real life data sets. The simulation is carried out to compare the estimators in terms of coverage probability and the length of the confidence interval. The small sample comparison indicates that two of the proposed estimators perform better than the sample C.V. The regression estimator using the information on the Population C.V of the auxiliary variable emerges as the best estimator.
Źródło:
Statistics in Transition new series; 2011, 12, 2; 357-380
1234-7655
Pojawia się w:
Statistics in Transition new series
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of Turboshaft Engine Adaptive Dynamic Model: Analysis of Estimation Errors
Autorzy:
Yepifanov, Sergiy
Bondarenko, Oleksiy
Powiązania:
https://bibliotekanauki.pl/articles/36807197.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
turbine engine
turboshaft
gas generator
dynamic model
engine time constant
identification
estimation error
design of experiment
Opis:
One of the most perspective directions of aircraft engine development is related to implementing adaptive automatic electronic control systems (ACS). The significant elements of these systems are algorithms of matching of mathematical models to actual performances of the engine. These adaptive models are used directly in control algorithms and are a combination of static and dynamic sub-models. This work considers the dynamic sub-models formation using the Least Square method (LSM) on a base of the engine parameters that are measured in-flight. While implementing this function in the (ACS), the problem of checking the sufficiency of the used information for ensuring the required precision of the model arises. We must do this checking a priori (to determine a set of operation modes, the shape of the engine test impact and volume of recorded information) and a posteriori. Equations of the engine models are considered. Relations are derived that determine the precision of parameters of these models’ estimation depending on the precision of measurement, the composition of the engine power ratings, and durability of observations, at a stepwise change of fuel flow. We present these relations in non-dimensional coordinates that make them universal and ready for application to any turboshaft engine.
Źródło:
Transactions on Aerospace Research; 2022, 4 (269); 59-71
0509-6669
2545-2835
Pojawia się w:
Transactions on Aerospace Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quantum inspiration to build a neural model based on the Day-Ahead Market of the Polish Power Exchange
Autorzy:
Ruciński, Dariusz
Powiązania:
https://bibliotekanauki.pl/articles/2052430.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Przyrodniczo-Humanistyczny w Siedlcach
Tematy:
Neural Modeling
day-ahead market
Polish power exchange
mean square error
determination index
quantum inspired neural model
Opis:
The article is an attempt of the methodological approach to the proposed quantum-inspired method of neural modeling of prices quoted on the Day-Ahead Market operating at TGE S.A. In the proposed quantum-inspired neural model it was assumed, inter alia, that it is composed of 12 parallel Perceptron ANNs with one hidden layer. Moreover, it was assumed that weights and biases as processing elements are described by density matrices, and the values flowing through the Artificial Neural Network of Signals are represented by qubits. Calculations checking the correctness of the adopted method and model were carried out with the use of linear algebra and vector-matrix calculus in MATLAB and Simulink environments. The obtained research results were compared to the results obtained from the neural model with the use of a comparative model.
Źródło:
Studia Informatica : systems and information technology; 2021, 1-2(25); 23-37
1731-2264
Pojawia się w:
Studia Informatica : systems and information technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Practical aspects of the use of the sluice gate discharge equations to estimate the volumetric flow rate in the irrigation channels
Autorzy:
Kubrak, Elżbieta
Kubrak, Janusz
Powiązania:
https://bibliotekanauki.pl/articles/2174345.pdf
Data publikacji:
2022
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
discharge coefficient
discharge calculation error
irrigation channel
laboratory model investigations
submerged sluice gate flow
volumetric flow rate
Opis:
The article presents the experimental results of the calibration of the typical check structure with sluice gates installed in a trapezoidal irrigation channel. Hydraulic experiments on sluice gate discharge capacity were performed on a model made in a 1:2 scale. It has been explained how the method of measuring the downstream water depth below the sluice gate in the check structures installed in a trapezoidal irrigation channels affects the measured depth values. On the basis of hydraulic measurements, regression relationships were developed for the discharge coefficients for submerged outflow through the sluice gate in two types of sluice gates installed in irrigation channels. The formulas allow to calculate the volumetric flow rate below the submerged sluice gate after determining the water depth upstream and below the sluice gate and the gate opening height. The differences in volumetric flow rates calculated from regression relationships and measured values do not exceed 10%, which confirms their practical suitability for calculating the discharge through a sluice gate mounted in a trapezoidal channel. The values of the discharge coefficients determined in the channels with rectangular cross-sections are not useful for the discharge coefficients of sluice gates check structures installed in trapezoidal channels. Nomograms and relationships for discharge coefficients of the analysed sluice gate were developed.
Źródło:
Journal of Water and Land Development; 2022, 55; 129--137
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Error Detection in the Navigational Watch Based on the Behavior Analysis of Navigators
Autorzy:
Nishizaki, C.
Takemoto, T.
Powiązania:
https://bibliotekanauki.pl/articles/116923.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Navigators’ Situation Awareness Model
Human Factor
Situation Awareness
safety at sea
Sea Service
Navigational Watch
Error Detection
watchkeeping
Opis:
Poor lookouts, i.e. one of errors in situation awareness, are pointed out as the major cause of collisions of ships, through investigations of collision accidents. In order to evaluate safety measures for preventing collisions caused by poor lookouts, it is necessary to understand background factors, so called “contexts”, of errors in situation awareness regardless of occurrence of collisions. The purpose of this study is to point out the possible significant contexts, using a navigator’s situation awareness model. As a result, we point out that one of the possible significant contexts is a problem on judgment of priority levels of other ships with regard to attention.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2015, 9, 2; 163-168
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The accuracy of the navigational accelerometer with a nonlinear metrological model in operating conditions
Dokładność nawigacyjnego akcelerometru z nieliniowym modelem metrologicznym w warunkach pracy
Autorzy:
Chernyak, Mycola
Kolesnyk, Vadym
Powiązania:
https://bibliotekanauki.pl/articles/36419664.pdf
Data publikacji:
2020
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
navigational accelerometer
vibration error
metrological model
conversion function
identification of coefficients
static test
akcelerometr nawigacyjny
błąd drgań
model metrologiczny
funkcja konwersji
identyfikacja współczynników
próba statyczna
Opis:
A mathematical model of the error of the navigational accelerometer caused by the nonlinearity of its metrological model, taking into account the influence of vibration, was developed. The method of experimental estimation of the vibration error based on the developed model was proposed. The main idea of the method is to evaluate parameters of the developed model during static tests in the terrestrial gravitational field and to calculate error according to the specific vibration characteristics – the amplitude in the case of harmonic vibration profile or the frequency band and the power spectral density in the case of random vibration. The effectiveness of the proposed method has been tested using three types of navigation accelerometers in comparison with the results of classical dynamic testing in various vibration conditions (harmonic, white noise, etc.).
Opracowano model matematyczny błędu akcelerometru nawigacyjnego spowodowany nieliniowością jego modelu metrologicznego, uwzględniający wpływ wibracji. Zaproponowano metodę eksperymentalnego oszacowania błędu wibracji w oparciu o opracowany model. Główną ideą metody jest ocena parametrów opracowanego modelu podczas prób statycznych w ziemskim polu grawitacyjnym i obliczenie błędu zgodnie ze specyficznymi cechami drgań – amplitudą w przypadku profilu drgań harmonicznych lub pasma częstotliwości i spektrum mocy gęstość w przypadku drgań losowych. Skuteczność proponowanej metody została przetestowana przy użyciu trzech rodzajów akcelerometrów nawigacyjnych w porównaniu z wynikami klasycznych testów dynamicznych w różnych warunkach drgań (harmoniczne, biały szum itp.).
Źródło:
Transactions on Aerospace Research; 2020, 3 (260); 1-10
0509-6669
2545-2835
Pojawia się w:
Transactions on Aerospace Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Funkcja przetrwania strumienia zagrożeń i jej aproksymacja
Survival function of the sequence of risks and its approximation
Autorzy:
Popowska, B.
Andrzejczak, K.
Powiązania:
https://bibliotekanauki.pl/articles/257865.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
funkcja przetrwania
strumień zagrożeń
model szokowych uszkodzeń
czas zdatności systemu
błąd aproksymacji
(D)NBUE
survival function
sequence of risks
shock model
system lifetime
error of approximation
Opis:
W teorii niezawodności podstawowym zagadnieniem jest wyznaczenie funkcji przetrwania dla eksploatowanych obiektów, które są ciągle narażone na utratę zdatności ze względu na różnorakie zagrożenia. Przedstawione w tej pracy metody można zastosować do klasy obiektów, które są zdolne odparować zagrożenie i to wielokrotnie zanim utracą zdatność. Przyjmujemy, że zagrożenia systemu mogą się powtarzać, więc możemy mówić o strumieniach zagrożeń. Rozważamy zagadnienie aproksymacji rozkładu prawdopodobieństwa w oparciu o funkcję przetrwania obiektu technicznego narażonego na losowy strumień zagrożeń. Wprowadzamy ogólną postać funkcji przetrwania zagrożeń jak i dwa szczegółowe modele: Poissonowski i dwumianowy. W okresie eksploatacji obiektu często trudno jest określić jego czas zdatności, więc przedstawiamy aproksymację funkcji przetrwania i szacujemy błąd tej aproksymacji.
In the theory of reliability, a basic topic is determining the survival function of exploited objects. We assume that these objects are constantly exposed to the loss of ability because of various dangers. Methods presented in this publication can be applied to an object that is able to repel the danger many times before it loses its usefulness. We suppose that the danger to the system can repeat many times, which is "the sequence of risks." The technical object is exposed to a random sequence of risks, and we consider the problem of the approximation of the lifetime probability distribution based on the survival function. We introduce a general form of the survival function in the context of a sequence of risks and two particular models: the Poisson and binomial model. In the time of exploitation the object, it is very difficult to find the lifetime distribution, so we introduce an approximation of the survival function, and we estimate the error of this approximation. It can be very useful in practice.
Źródło:
Problemy Eksploatacji; 2011, 1; 149-155
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling sensitive issues on successive waves
Autorzy:
Priyanka, Kumari
Trisandhya, Pidugu
Powiązania:
https://bibliotekanauki.pl/articles/1359283.pdf
Data publikacji:
2019-04-25
Wydawca:
Główny Urząd Statystyczny
Tematy:
Sensitive variable
Successive waves
Scrambled Response model
Class of estimators
Population mean
Bias
Mean squared error
Optimum matching fraction
Opis:
This paper addresses the problem of estimation of population mean of sensitive character using non-sensitive auxiliary variable at current wave in two wave successive sampling. A general class of estimator is proposed and studied under randomized and scrambled response model. Many existing estimators have been modified to work for sensitive population mean estimation. The modified estimators became the members of proposed general class of estimators. The detail properties of all the estimators have been discussed. Their behaviour under randomized and scrambled response techniques have been elaborated. Numerical illustrations including simulation have been accompanied to judge the performance of different estimators. Finally suitable recommendations are forwarded.
Źródło:
Statistics in Transition new series; 2019, 20, 1; 41-65
1234-7655
Pojawia się w:
Statistics in Transition new series
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exploring the Human Handwriting Process
Autorzy:
Bouslama, F.
Benrejeb, M.
Powiązania:
https://bibliotekanauki.pl/articles/911159.pdf
Data publikacji:
2000
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
charakter pisma
model dynamiczny
human handwriting
hand-muscle system
EMG signals
Van der Gon dynamic models
feedback error learning
Opis:
The study of human handwriting movements is of great interest to researchers and biologists. It can lead to an understanding of the properties of the biological system that generates the human handwriting movements. With the identification of a dynamical system that exhibits characteristics similar to the biological one, it is possible to study handwriting movements, to identify their driving motor signals and to try to reproduce by machine the handwriting motion. In this paper, we give an analysis of modeling techniques for the handwriting process proposed in the literature. We show that either mathematical models based on the trajectories of handwritten objects or physical models obtained from the dynamic motion of the human hand can be used for modeling the handwriting process. We study the handwriting movements using these approaches and we give an analysis and synthesis of the driving motor signals. We apply the results to the generation of handwritten Arabic letters. We then propose a new synthesis technique where a more promising and realistic model can be obtained. We present the basic idea and expect that some improvement over the previous techniques can be obtained. The technique is based on Feedback Error Learning neural networks.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2000, 10, 4; 877-904
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Jednomianowy model liczby Nusselta w pomiarze zmiennej temperatury metodą "w ciemno" przy niestacjonarnych przepływach
Monomial model of Nusselt number in case of time-varying temperature measurements with the “blind” correction method
Autorzy:
Nabielec, J.
Jamróz, P.
Powiązania:
https://bibliotekanauki.pl/articles/267356.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
korekcja błędu dynamicznego
pomiar temperatury
niestacjonarny model dynamiki systemu pomiarowego
liczba Nusselta
dynamic error correction method
temperature measurement
non-stationary model of measurement system
Nusselt number
Opis:
Pomiar zmiennej w czasie temperatury medium poruszającego się ze zmienną prędkością obarczony jest istotnym błędem dynamicznym. Jego źródłem są zależne od tej prędkości właściwości dynamiczne toru pomiarowego określone przez współczynnik dynamiki. Metoda "w ciemno" umożliwia zidentyfikowanie jego chwilowych wartości i skorygowanie błędu dynamicznego na drodze numerycznej. Zadanie to jest dobrze postawione przy wykorzystaniu jednomianowej reprezentacji liczby Nusselta, od której zależy chwilowa wartość tego współczynnika. W artykule zaprezentowano podstawy teoretyczne metody pomiarowej, wyniki badań symulacyjnych oraz eksperymentalnej jej weryfikacji.
Measurement result of time-varying temperature of the medium moving at a variable velocity is encumbered with a significant dynamic error. The main reason of that error are the dynamic properties of the measurement channel described by the dynamic coefficient. The “blind” correction method gives a possibility of identifying the instantaneous values of this factor and numerically correcting the dynamic error. This task is well defined when the monomial Nusselt number is used in a dynamic coefficient model. The article presents the theoretical basis of the measurement method, the simulation results and experimental verification.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2016, 49; 79-84
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An improved GM(1.1) model with background value optimization and Fourier-series residual error correction and its application in cost forecasting of coal mine
Ulepszony model GM(1,1) z optymalizacją wartości tła i korekcją błędów resztkowych szeregów Fouriera oraz jego zastosowanie w prognozowaniu kosztów kopalni węgla kamiennego
Autorzy:
Liu, Di
Li, Guoqing
Chanda, Emmanuel K.
Hu, Nailian
Ma, Zhaoyang
Powiązania:
https://bibliotekanauki.pl/articles/216495.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
cost forecasting
dynamic grey model
background value optimization
Fourier series
residual error correction
prognozowanie kosztów
dynamiczny model szary
optymalizacja wartości tła
korekcja błędów resztkowych
szeregi Fouriera
Opis:
This paper researches the application of grey system theory in cost forecasting of the coal mine. The grey model (GM(1.1)) is widely used in forecasting in business and industrial systems with advantages of minimal data, a short time and little fluctuation. Also, the model fits exponentially with increasing data more precisely than other prediction techniques. However, the traditional GM(1.1) model suffers from the poor anti-interference ability. Aimed at the flaws of the conventional GM(1.1) model, this paper proposes a novel dynamic forecasting model with the theory of background value optimization and Fourier-series residual error correction based on the traditional GM(1.1) model. The new model applies the golden segmentation optimization method to optimize the background value and Fourier-series theory to extract periodic information in the grey forecasting model for correcting the residual error. In the proposed dynamic model, the newest data is gradually added while the oldest is removed from the original data sequence. To test the new model’s forecasting performance, it was applied to the prediction of unit costs in coal mining, and the results show that the prediction accuracy is improved compared with other grey forecasting models. The new model gives a MAPE & C value of 0.14% and 0.02, respectively, compared to 1.75% and 0.37 respectively for the traditional GM(1.1) model. Thus, the new GM(1.1) model proposed in this paper, with advantages of practical application and high accuracy, provides a new method for cost forecasting in coal mining, and then help decision makers to make more scientific decisions for the mining operation.
W pracy zbadano zastosowanie teorii szarego systemu w prognozowaniu kosztów kopalni węgla. Szary model (GM(1,1)) jest szeroko wykorzystywany w prognozowaniu w systemach biznesowych i przemysłowych z niewielką ilością danych, krótkim czasem i nieznacznymi wahaniami. Ponadto model dopasowuje wykładniczo dane bardziej dokładnie niż inne techniki prognozowania. Jednak tradycyjny model GM(1,1) ma słabą zdolność przeciwdziałania zakłóceniom. Mając na uwadze wady konwencjonalnego modelu GM(1,1), w artykule zaproponowano – w oparciu o tradycyjny model GM(1,1) – nowy model dynamicznego prognozowania z teorią optymalizacji wartości tła i korektą błędów resztkowych szeregów Fouriera. Nowy model stosuje metodę optymalizacji złotej segmentacji do optymalizacji wartości tła oraz teorię szeregów Fouriera w celu wyodrębnienia okresowych informacji w szarym modelu prognozowania, aby skorygować błąd resztkowy. W proponowanym modelu dynamicznym najnowsze dane są stopniowo dodawane, podczas gdy najstarsze – usuwane z oryginalnej sekwencji danych. Aby przetestować dokładność prognozowania nowego modelu, zastosowano go do prognozowania kosztów jednostkowych pozyskania węgla, a wyniki pokazują, że dokładność prognozowania jest lepsza w porównaniu z innymi szarymi modelami prognozowania. Nowy model daje wartości MAPE & C wynoszące odpowiednio 0,33% i 0,07, w porównaniu z odpowiednio 1,1% i 0,3 dla tradycyjnego modelu GM(1,1). Zatem zaproponowany w artykule, ulepszony model GM(1,1) z zaletami praktycznego zastosowania i wysoką dokładnością, jest nową metodą prognozowania kosztów w górnictwie węgla, która ułatwia decydentom podejmowanie decyzji ugruntowanych naukowo dotyczących operacji pozyskania węgla.
Źródło:
Gospodarka Surowcami Mineralnymi; 2019, 35, 3; 75-98
0860-0953
Pojawia się w:
Gospodarka Surowcami Mineralnymi
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
O formalnych podstawach składania niepewności A i B
On formal bases of composition of A and B type uncertainties
Autorzy:
Jakubiec, W.
Powiązania:
https://bibliotekanauki.pl/articles/155352.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
niepewność wyniku pomiaru
niepewności typu A i B
model wyniku pomiaru
błąd wyniku pomiaru
uncertainty of a measurement result
model of a measurement result
error of a measurement result
Opis:
Przedmiotem rozważań są podstawy formalne procedury składania niepewności typu A i B, zaproponowanej w przewodniku GUM [1]. W artykule poddano analizie podstawy matematyczne tej procedury i wykazano ich niespójność, a następnie omówiono nowy sposób obliczania niepewności, bazujący na modelu wyniku pomiaru.
Considerations presented in the paper deal with the visible absence of formal bases of the A and B type uncertainty composition procedure proposed in GUM [1] and based on partial uncertainty composition described by formula (1). This lack of formality is caused by the fact that the uncertainty of type A is calculated on a basis of the measurement result series and one cannot point any other set of measurements, which may be composed with this series. The first part of the paper is devoted to presentation of a single measurement result model (2) in application to the uncertainty calculation procedure based on the uncertainty definition (3) and determined by functional (4). In the succeeding part, an analysis of formula (1) from the point of view of the random error model given by (6) is realised. By analogy to uncertainties of A and B type, the errors of the same type have been determined, which enabled obtaining equation (10) and comparing it with equation (1). The final part of the paper contains discussion of conclusions which can be drawn from this comparison.
Źródło:
Pomiary Automatyka Kontrola; 2012, R. 58, nr 3, 3; 233-235
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prognozowanie ilości ścieków dopływających do oczyszczalni za pomocą sztucznych sieci neuronowych z wykorzystaniem liniowej analizy dyskryminacyjnej
Forecasting the sewage inflow into a treatment plant using artificial neural networks and linear discriminant analysis
Autorzy:
Szeląg, B.
Studziński, J.
Chmielowski, K.
Leśniańska, A.
Rojek, I.
Powiązania:
https://bibliotekanauki.pl/articles/237303.pdf
Data publikacji:
2018
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
Wastewater inflow
sewage treatment plant
water level
daily precipitation
artificial neural networks
discriminant models
mean square error
mean percentage error
relative error
residual relative error
importance coefficient
dopływ ścieków
oczyszczalnia ścieków
poziom wody
opad dobowy
sztuczne sieci neuronowe
model dyskryminacyjny
błąd średniokwadratowy
średni błąd procentowy
błąd względny
względny błąd resztowy
współczynnik ważności
Opis:
W pracy przedstawiono wyniki prognozowania ilości ścieków dopływających do oczyszczalni komunalnej w Rzeszowie z wykorzystaniem perceptronowych wielowarstwowych sztucznych sieci neuronowych. W modelu prognostycznym przyjęto następujące zmienne niezależne: zmierzona ilość ścieków dopływających do oczyszczalni określona w poprzednich dobach, poziom wody w Wisłoku (odbiornik ścieków), suma dobowych opadów atmosferycznych oraz dobowa ilość wody tłoczonej do sieci wodociągowej. Przeprowadzone obliczenia wykazały, że wśród rozpatrywanych zmiennych istotny wpływ na zdolność predykcyjną modelu prognostycznego miał poziom wody w Wisłoku, wysokość opadów atmosferycznych oraz ilość ścieków dopływająca do obiektu zmierzona w poprzednich dniach. Analizowano również wpływ poszczególnych parametrów strukturalnych modelu opartego na sztucznych sieciach neuronowych na wyniki prognozowania. Przeprowadzone badania, z wykorzystaniem drzew klasyfikacyjnych, wykazały, że na liczbę neuronów w warstwie ukrytej wpływała liczba sygnałów wejściowych do modelu, natomiast rodzaj funkcji aktywacji w warstwach ukrytej i wyjściowej miał mniejsze znaczenie, co potwierdziły wartości o znaczeniu predykcyjnym. Badano również możliwość zastosowania liniowej analizy dyskryminacyjnej do oceny zdolności predykcyjnych skonstruowanych modeli prognostycznych. Uzyskane wyniki wykazały, że liniowa analiza dyskryminacyjna może być ciekawym narzędziem do oceny doboru zmiennych w modelu prognostycznym ilości ścieków dopływających do oczyszczalni.
The paper presents the results of forecasting the sewage inflow into the municipal wastewater treatment plant in Rzeszow using multilayer perceptron neural networks. For the forecast model, the following independent variables were adopted: the measured inflow volume to the treatment plant from the previous days, the water level in the Wislok River (effluent receiver), the total daily precipitation and the daily water inflow into the network. The calculations led to conclusions that variables substantially affecting the prognostic capacity of the forecast model included the water level in the Wislok River, the volume of precipitation and the sewage inflow to the facility from the previous days. Additionally, the impact of individual structural parameters of the model based on artificial neural networks on forecasting results was analyzed. The research conducted with the use of classification trees demonstrated that number of neurons in the hidden layer was influenced by the number of inputs to the model, while the type of activation function in the hidden and output layer was of minor importance which was confirmed by the data of prognostic value. The applicability of a linear discriminant analysis for assessment of prognostic ability of the constructed forecast models was also investigated. The results obtained demonstrated that the linear discriminant model might be an interesting assessment tool to select variables for the forecast model of sewage inflow to a treatment plant.
Źródło:
Ochrona Środowiska; 2018, 40, 4; 9-14
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of the settlement prediction in soft soil by Richards Model: based on a linear least squares-iteration method
Autorzy:
Nadeem, Muhammad
Akbar, Muhammad
Huali, Pan
Xiaoqing, Li
Guoqiang, Ou
Amin, Azka
Powiązania:
https://bibliotekanauki.pl/articles/1852538.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metoda iteracji liniowej
metoda najmniejszych kwadratów
prognoza
grunt słaby
podłoże gruntowe
błąd porównawczy
osiadanie gruntu
model obliczeniowy
linear iterative method
least square method
prediction
soft soil
comparative error
settlement
calculation model
Opis:
Prediction of soft soil sub-grades settlement has been a big challenge for geotechnical engineers that are responsible for the design of roadbed embankment. The characteristics of low strength, poor permeability, high water contents, and high compressibility are dominant in soft soils, which result in a huge settlement in the case of long-term loading. The settlement prediction in soft soil subgrades of Jiehui Expressway A1, Guangdong, China, is the focus of this study. For this purpose, the necessary data of settlement is collected throughout the project execution. The numerical analysis is conducted by using the Richards model based on Linear Least Squares Iteration (LLS-I) method to calculate and predict the expected settlement. The traditional settlement prediction methods, including the hyperbolic method, exponential curve method, and pearl curve method, are applied on field settlement data of soft soil subgrades of Jiehui Expressway A1. The results show that the Richards model based on Linear Least Squares Iteration (LLS-I) method has high precision, and it has proven to be a better option for settlement prediction of soft soil sub-grades. The model analysis indicates that the mean absolute percentage error (MAPE) can be minimized as compared to other soft soil sub-grades settlement prediction methods. Hence, Richards's model-based LLS-I method has a capability for simulation and settlement prediction of soft soil subgrades.
Źródło:
Archives of Civil Engineering; 2021, 67, 2; 491-506
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Portfolios which Compensate Lower Share Prices without Short Sale of Shares
Portfele inwestycyjne, które rekompensują niższe ceny akcji bez sprzedaży krótkiej akcji
Autorzy:
Zaremba, Leszek
Powiązania:
https://bibliotekanauki.pl/articles/509450.pdf
Data publikacji:
2017
Wydawca:
Akademia Finansów i Biznesu Vistula
Tematy:
approximate hedging
Black-Scholes formula
incomplete market
replication error
share prices
hedging przybliżony
model Blacka-Scholesa
rynek niepełny
błąd replikacji
ceny akcji
Opis:
We present a 1-period model of the Polish financial market from the view point of the largest Polish company KGHM, whose share prices suffered huge declines in the last 2 years. For example, they declined from 119 PLN on June 1, 2015 to 68 PLN on December 2, 2015. Our goal is to show how KGHM might create a portfolio (with practically zero cost), which would fully compensate these declines without short sale of KGHM’s shares. The presented methodology is equally suitable for any company in any other country, an investment fund, as well as any other investor. We employ here a matrix model of the Polish financial market and make use of the Black–Scholes formula to value our portfolio. To give more insight to practitioners, we distinguish two cases. In one of them, volatility of KGHM’s share prices is 33%, and in the other case it equals 20%.
Przedstawiamy 1-okresowy model polskiego rynku finansowego z punktu widzenia największej polskiej spółki, KGHM, której ceny akcji odnotowały w ostatnich dwóch latach ogromne spadki. Przykładowo, ceny ich spadły z 119 PLN w dniu 1 czerwca 2015 roku do 68 PLN w dniu 2 grudnia 2015 r. Naszym celem jest pokazanie, jak KGHM mógłby stworzyć portfel inwestycyjny (praktycznie bez żadnych kosztów), który mógłby w pełni zrekompensować owe spadki bez krótkiej sprzedaży akcji KGHM. Zaprezentowana metodologia jest również odpowiednia dla dowolnej spółki w dowolnym innym kraju, funduszu inwestycyjnym, jak również dla dowolnego innego inwestora. Zastosowaliśmy tutaj macierzowy model opolskiego rynku finansowego i wykorzystaliśmy model Blacka-Scholesa do wyceny portfela. W celu lepszego rozeznania ze strony praktyków wyróżniamy dwa przypadki. W jednym z nich zmienność cen akcji spółki KGHM wynosi 33%, w drugim zaś przypadku – 20%.
Źródło:
Zeszyty Naukowe Uczelni Vistula; 2017, 56(5) Ekonomia XV; 97-109
2353-2688
Pojawia się w:
Zeszyty Naukowe Uczelni Vistula
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On the smoothed parametric estimation of mixing proportion under fixed design regression model
Autorzy:
Ramakrishnaiah, Y. S.
Trivedi, Manish
Satish, Konda
Powiązania:
https://bibliotekanauki.pl/articles/1359251.pdf
Data publikacji:
2019-04-25
Wydawca:
Główny Urząd Statystyczny
Tematy:
mixture of distributions
mixing proportion
smoothed parametric estimation
fixed design regression model
mean square error
optimal band width
strong consistency
asymptotic normality
Opis:
The present paper revisits an estimator proposed by Boes (1966) - James (1978), herein called BJ estimator, which was constructed for estimating mixing proportion in a mixed model based on independent and identically distributed (i.i.d.) random samples, and also proposes a completely new (smoothed) estimator for mixing proportion based on independent and not identically distributed (non-i.i.d.) random samples. The proposed estimator is nonparametric in true sense based on known “kernel function” as described in the introduction. We investigated the following results of the smoothed estimator under the non-i.i.d. set-up such as (a) its small sample behaviour is compared with the unsmoothed version (BJ estimator) based on their mean square errors by using Monte-Carlo simulation, and established the percentage gain in precision of smoothed estimator over its unsmoothed version measured in terms of their mean square error, (b) its large sample properties such as almost surely (a.s.) convergence and asymptotic normality of these estimators are established in the present work. These results are completely new in the literature not only under the case of i.i.d., but also generalises to non-i.i.d. set-up.
Źródło:
Statistics in Transition new series; 2019, 20, 1; 87-102
1234-7655
Pojawia się w:
Statistics in Transition new series
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metody wykrywania składowej addytywnej błędu w precyzyjnych mostkach termometrycznych
Methods for the additive component detection of the error of thermometric bridges
Autorzy:
Mikhal, A. A.
Warsza, Z. L.
Powiązania:
https://bibliotekanauki.pl/articles/155888.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pomiar
mostek termometryczny
składowa addytywna błędu
niepewność
kontrola
model rezystancji równej zeru
thermometry
thermometric bridge
additive error component
circuits modeling zero of resistance
Opis:
Rozpatrzono dwa znane sposoby i zaproponowano nowy sposób wyznaczania składowej addytywnej błędu precyzyjnych pomiarowych mostków termometrycznych o czułości względnej poniżej 0,1 ppm. Podano układ realizacji rezystancji do zerowania mostka, w której wykorzystuje się niekonwencjonalne dołączanie czterozaciskowej rezystancji wzorcowej. Wykonane obliczenia dowodzą, że jej wartość nie przekracza 0,1 nΩ. Poprawność rozważań sprawdzono eksperymentalnie uzyskując zbliżone wskazania mostka dla rezystancji czterozaciskowych o wartościach od 1 Ω do 100 MΩ dołączanych w sposób modelujący rezystancję o wartości-równej zeru.
The paper refers to AC bridges with precise voltage dividers formed by the adjustable transformer with the strong magnetic coupling between coils. Metrological model of the temperature measurement using these bridges is presented. The additive, multiplicative and linearity components of temperature measurement error are considered in the model. Conventional two methods for determining the additive systematic error when Kelvin type clips are applied is recalled and as examples the special device used for zero resistance of any type of Kelvin clips and also connections for zero of coaxial bridges are shown. A new method of the determination of the additive error component, which is based on a four-terminal standard resistance connected to measurement bridge in not a standard mode, is developed. In this method the equipotential pairs of current and voltage terminals of the four-terminal standard resistance are now connected unconventionally (see Fig. 6) to the current and voltage terminals of the bridge circuit. Any four-terminal standard resistor of up to 100 MΩ can be used for that. It is estimated, the effective zero resistance is less than 10-10 Ω. Standards of the nominal resistance of 0,1 Ω to 1 MΩ, are used in measurement experimental studies to find bridge readings for the zero input resistance. The results of experimental indicate that the additive error of the bridge is about 0.5 LSB and is independent from the nominal value of standard resistance. Conclusions and final remarks are included.
Źródło:
Pomiary Automatyka Kontrola; 2012, R. 58, nr 12, 12; 1033-1036
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Performance analysis of MPPM FSO transmission over Gamma–Chi-square strong atmospheric turbulence
Autorzy:
Todorovic, Jelena
Spalevic, Petar
Panic, Stefan
Abdullah, Majid Hamid
Pantelic, Ivan
Powiązania:
https://bibliotekanauki.pl/articles/2202766.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
FSO
free space optics
ABER
average bit error rate
MPPM
multi-pulse pulse-position
novel Gamma-Chi-square distribution
channel model
strong atmospheric turbulence
Opis:
In this paper, performance analysis of free space optical (FSO) system operating in conditions of strong atmospheric turbulence over Gamma–Chi-square turbulence model, has been carried out. We have observed reception over multi-pulse pulse-position (MPPM) modulation format for the case of strong atmospheric turbulence conditions modeled with Gamma–Chi-square turbulence model and have compared it with turbulence modeling distributions such are: Gamma–Gamma distribution, K-distribution, negative exponential distribution, log–normal distribution. First, we have provided closed-form analytical expressions for average bit error rate (ABER) at the reception for each observed case and then based on them, we have obtained numerical and Monte Carlo simulation results in order to observe turbulence level impact on system performance.
Źródło:
Optica Applicata; 2023, 53, 1; 111--126
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
PER Estimation of AIS in Inland Rivers based on Three Dimensional Ray Tracking
Autorzy:
Ma, F.
Chu, X. M.
Liu, C. G.
Powiązania:
https://bibliotekanauki.pl/articles/117153.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Ray Tracking
Three Dimensional Ray Tracking
Automatic Identification System (AIS)
Package Error Rate (PER)
Chinese Navigable Waterways
Inland Shipping
PER Estimation
Ray Tracking Model
Opis:
The Automatic Identification System (AIS) is an important maritime safety device, which is populous in inland rivers. Compared with that in open sea, the Package Error Rate (PER) of AIS in inland river has increased sharply due to its complex environment. With the help of hardware in loop simulation, it is possible to make statistical calculation on the PER under a given field strength and describe the data by quadratic rational fraction. Meanwhile, in the three dimensional software environments, the signal field strength is able to be calculated by the ray tracking method, which exhausts all the possible propagation paths, including direct way, reflection, diffractions, and the other medium attenuation matters. Beyond that, in the model, the propagation geography information in inland rivers is required to be simplified in some way, or the computation of the ray tracking is too hard to get. The paper set the Changjiang Wuhan channel as the field testing region, and all the deviations are less than 5% in sunny weather, which proves the method accurate and effective.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2014, 8, 1; 89-94
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel Wiener process model with measurement errors for degradation analysis
Analiza degradacji z zastosowa niem nowego modelu procesu Wienera uwzględniającego błędy pomiarowe
Autorzy:
Wang, Z.
Li, J.
Zhang, Y.
Fu, H.
Liu, C.
Krishnaswamy, S.
Powiązania:
https://bibliotekanauki.pl/articles/301209.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
performance degradation
independent increment process
Wiener process model
linear mean function
linear standard deviation function
measurement error
obniżenie charakterystyk
proces o przyrostach niezależnych
model procesu Wienera
funkcja średniej liniowej
funkcja liniowego odchylenia standardowego
błąd pomiaru
Opis:
Degradation analysis can be used to assess reliability for complex systems and highly reliable products, because few or even no failures are expected in a reasonable life test span. In order to further our study on degradation analysis, an independent increment random process method with linear mean and standard deviation functions is presented to model practical degradation procedures. It is essentially a Wiener process method. Since measurement errors are often created by imperfect instruments, procedures and environments during degradation investigation, the measurement error is incorporated into the independent increment random process. Furthermore, statistical inferences of this model are discussed, and close forms of a product’s median life and percentile of the failure time distribution (FTD) are also derived. The proposed method is illustrated and verified in a comprehensive simulation study and two practice applications for storage disks and Infrared light-emitting diodes. Meanwhile, the time-transformed Wiener process model with measurement error is considered as a reference method. Comparisons show that the proposed model can provide reasonable results, even in considerably small sample size circumstance.
Analizę degradacji można stosować do oceny niezawodności wysoce niezawodnych złożonych systemów i produktów, ponieważ w ich przypadku istnieje bardzo niskie lub zerowe prawdopodobieństwo wystąpienia uszkodzenia w trakcie badania trwałości w przyjętym okresie eksploatacji. W artykule przedstawiono nowo opracowane podejście do modelowania procesu degradacji wykorzystujące metodę procesu o przyrostach niezależnych oraz pojęcia funkcji średniej liniowej i funkcji liniowego odchylenia standardowego. Zasadniczo jest to metoda oparta na procesie Wienera. Ponieważ badania degradacji często wiążą się z błędami pomiarowymi wynikającymi z niedoskonałości stosowanych narzędzi, procedur i warunków badawczych, opisywany proces o przyrostach niezależnych uwzględnia błędy pomiaru. Ponadto, w pracy omówiono wnioski statystyczne, jakie można wyciągnąć na podstawie przedstawionego modelu oraz wyprowadzono wzory ogólne na średnią długość życia produktu oraz na percentyl rozkładu czasu do uszkodzenia. Proponowaną metodę zilustrowano i zweryfikowano na podstawie kompleksowego badania symulacyjnego oraz przykładów praktycznego zastosowania modelu w odniesieniu do dysków pamięci masowej oraz diod podczerwieni. W artykule przedstawiono także model procesu Wienera z transformowanym czasem uwzględniający błąd pomiaru, który posłużył za model referencyjny. Porównania pokazują, że proponowany model może dawać poprawne wyniki, nawet przy bardzo małej liczebności próby.
Źródło:
Eksploatacja i Niezawodność; 2016, 18, 3; 396-405
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of the Artificial Neural Network type on the quality of learning on the Day-Ahead Market model at Polish Power Exchange joint-stock company
Autorzy:
Ruciński, Dariusz
Powiązania:
https://bibliotekanauki.pl/articles/1819257.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Przyrodniczo-Humanistyczny w Siedlcach
Tematy:
Perceptron Artificial Neural Network
Radial Artificial Neural Network
Recursive Artificial Neural Network
neural model quality
Day-Ahead Market
Polish Power Exchange
Mean square error
determination index
Opis:
The work contains the results of the Day-Ahead Market modeling research at Polish Power Exchange taking into account the numerical data on the supplied and sold electricity in selected time intervals from the entire period of its operation (from July 2002 to June 2019). Market modeling was carried out based on three Artificial Neural Network models, ie: Perceptron Artificial Neural Network, Recursive Artificial Neural Network, and Radial Artificial Neural Network. The examined period of the Day-Ahead Market operation on the Polish Power Exchange was divided into sub-periods of various lengths, from one month, a quarter, a half a year to the entire period of the market's operation. As a result of neural modeling, 1,191 models of the Market system were obtained, which were assessed according to the criterion of the least error MSE and the determination index R2.
Źródło:
Studia Informatica : systems and information technology; 2019, 1-2(23); 77--93
1731-2264
Pojawia się w:
Studia Informatica : systems and information technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Monte Carlo Analysis of Forecast Error Variance Decompositions under Alternative Model Identification Schemes
Badanie dekompozycji wariancji błędów prognozy przy różnych schematach identyfikacji modeli wektorowej autoregresji za pomocą metody Monte Carlo
Autorzy:
Staszewska-Bystrova, Anna
Powiązania:
https://bibliotekanauki.pl/articles/654622.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
dekompozycja wariancji błędów prognozy
strukturalne modele wektorowej autoregresji
restrykcje długookresowe
restrykcje krótkookresowe
forecast error variance decomposition
structural vector autoregressive model
long-run restrictions
short-run restrictions
Opis:
Celem artykułu jest zbadanie dokładności estymacji parametrów dekompozycji wariancji błędów prognozy dla strukturalnych modeli wektorowej autoregresji zidentyfikowanych z użyciem restrykcji na parametry krótko‑ i długookresowe. W analizie wykorzystano eksperymenty Monte Carlo. Wykazano, że dla procesów o pierwiastkach, których wartość zbliżona jest do jedności, wybrane parametry dekompozycji wariancji błędów prognozy można oszacować z większą precyzją przy założeniu trójkątnej macierzy mnożników długookresowych niż przy restrykcji trójkątnej macierzy mnożników bezpośrednich. Uzyskane wyniki wnoszą wkład do dyskusji dotyczącej zalet i wad różnych schematów identyfikacji przez wskazanie kontrprzykładów dla hipotezy, że wykorzystanie restrykcji krótkookresowych prowadzi do mniejszych błędów szacunku niż zastosowanie restrykcji na parametry długookresowe.
The goal of the paper is to investigate the estimation precision of forecast error variance decomposition (FEVD) based on stable structural vector autoregressive models identified using short‑run and long‑run restrictions. The analysis is performed by means of Monte Carlo experiments. It is demonstrated that for processes with roots close to one, selected FEVD parameters can be estimated more accurately using recursive restrictions on the long‑run multipliers than under recursive restrictions on the impact effects of shocks. This finding contributes to the discussion of pros and cons of using alternative identification schemes by providing counterexamples for the notion that short‑run identifying restrictions lead to smaller estimation errors than long‑run restrictions.
Źródło:
Acta Universitatis Lodziensis. Folia Oeconomica; 2018, 5, 338; 115-131
0208-6018
2353-7663
Pojawia się w:
Acta Universitatis Lodziensis. Folia Oeconomica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of Parameters to Model Seafarers’ Supply in Latvia
Autorzy:
Gailitis, R.
Fjodorova, A.
Powiązania:
https://bibliotekanauki.pl/articles/116496.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Maritime Education and Training (MET)
MET System in Latvia
Model Seafarers’ Supply
Automatic Identification System (AIS)
Package Error Rate (PER)
Determination of Parameters
Merchant Fleet
Inland Shipping
Opis:
Shortage of seafarers is important topic as maritime industry plays a key role for economy of the European Union. According to the latest assessment of economic value of shipping industry in 2012, the EU shipping industry is estimated to have directly contributed €56 billion to GDP, employed 590,000 people, and generated tax revenues of €6 billion. During recent years increasing attention is paid to the education and training of seafarers as the seafarers and their knowledge are essential to sustainable development of the maritime cluster, as indicated in the maritime strategy of European Union. Indicative estimates suggest there were almost 38,000 students/cadets in maritime academy – type training across the EU and Norway in 2012, a 11% increase from 2004. Understanding of current trends in the pool of seafarers is prerequisite for successful implementation of the strategy. Main obstacle for assessment of effectiveness is lack of possibilities to monitor contribution from maritime education institutions to current state of European seafarers’ pool. The aim of this article is to show parameters which should be taken into account to model seafarers’ supply in future. The parameters are discussed on the basis of information from the Seamen Registry of Maritime Administration of Latvia.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2014, 8, 2; 245-252
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Krótko- i długookresowe skorygowane krańcowe skłonności do konsumpcji : gospodarka Polski w latach 1995-2018
Short and Long-run Corrected Marginal Propensity to Consume : Polish Economy in the Period 1995-2018
Autorzy:
Ossowski, Jerzy Czesław
Powiązania:
https://bibliotekanauki.pl/articles/1826415.pdf
Data publikacji:
2019
Wydawca:
Politechnika Gdańska
Tematy:
error correction mechanism
autoregressive global consumption model
short-run
corrected marginal propensity to consume
long-run corrected marginal propensity to consume
mechanizm korekty błędem
autoregresyjny model konsumpcji globalnej
krótkookresowa skorygowana krańcowa skłonność do konsumpcji
długookresowa skorygowana krańcowa skłonność do konsumpcji
Opis:
In the introductory part of the article – referring to Keynes’ theory – basic macroeconomic relations between global consumption and gross domestic product are discussed and defined. Next, an analysis of statistical information on private consumption expenditure of households (C) and global consumption expenditure of the society (CO) against the background of gross domestic product (GDP) in Poland in 1995–2018 was carried out. The analysis of empirical material carried out allowed formulating preliminary assumptions regarding the analyzed macro-dependencies. In the main theoretical part of the article – referring, inter alia, to the conclusions from the empirical part of the analysis – the research hypothesis was formulated, according to which: the relationship between real consumption (C or CO) and gross domestic product (GDP) is linear, inertial and subject to a correction mechanism. To verify the hypothesis, an autoregressive model of global consumption was formulated, which was subject to the error correction mechanism (ECM). Based on the analytical form of the considered model, the following measures were defined: — short-run, immediate uncorrected marginal propensity to consume (SrMPCim), — short-run corrected marginal propensity to consume (SrMPCcrd), — long-run corrected marginal propensity to consume (LrMPCcrd). In addition, a switch trend function was defined that was assigned to the dynamic error correction model (ECM) under consideration. In the empirical part of the article, two versions of the considered autoregressive consumption model with a correction mechanism were considered. In the first version of the model, real private consumption of households (C) was dependent on domestic product (GDP). On the other hand, the second version makes the total consumption of the society (CO) dependent on the domestic product (GDP). Both versions of the model were estimated, verified and interpreted. The analysis of the estimated versions of the model confirmed the theoretical research hypothesis according to which real consumption: — is linearly dependent on the gross domestic product, — is inertial, — it is corrected in time.
We wstępnej części artykułu - odwołując się do teorii Keynesa - omówiono i zdefiniowano podstawowe relacje makroekonomiczne pomiędzy konsumpcją globalną a produktem krajowym brutto. W następnej kolejności przeprowadzono analizę informacji statystycznych dotyczących prywatnych wydatków konsumpcyjnych gospodarstw domowych (C) oraz globalnych wydatków konsumpcyjnych społeczeństwa (CO) na tle produktu krajowego brutto (PKB) w Polsce w latach 1995-2018. Przeprowadzona analiza materiału empirycznego pozwoliła na sformułowanie wstępnych założeń dotyczących analizowanych makrozależności. W zasadniczej części teoretycznej artykułu - odwołując się między innymi do wniosków z części empirycznej analizy - sformułowano hipotezę badawczą, zgodnie z którą: zależność pomiędzy konsumpcją realną (C lub CO) a produktem krajowym brutto (PKB) ma charakter liniowy, inercyjny oraz podlega mechanizmowi korekty. Celem zweryfikowania postawionej hipotezy sformułowano autoregresyjny model konsumpcji globalnej, który podlegał mechanizmowi korekty błędem (ECM). Na podstawie postaci analitycznej rozważanego modelu zdefiniowano następujące mierniki: — krótkookresową, natychmiastową nieskorygowaną krańcową skłonność do konsumpcji (SrKSKim), — krótkookresową skorygowaną krańcową skłonność do konsumpcji (SrKSKcrd), — długookresową skorygowaną krańcową skłonność do konsumpcji (LrKSKcrd). Ponadto zdefiniowano funkcję trendu przełącznikowego, który przyporządkowano rozważanemu dynamicznemu modelowi korekty błędem (ECM).W części empirycznej artykułu rozpatrzono dwie wersje rozważanego autoregresyjnego modelu konsumpcji z mechanizmem korekty. W pierwszej wersji modelu uzależniono realną konsumpcję prywatną gospodarstw domowych (C) od produktu krajowego (PKB). Z kolei w drugiej wersji uzależniono realną konsumpcję całkowitą społeczeństwa (CO) od produktu krajowego (PKB). Obie wersje modelu oszacowano, zweryfikowano oraz zinterpretowano. Przeprowadzona analiza oszacowanych wersji modelu potwierdziła sformułowaną w części teoretycznej hipotezę badawczą zgodnie z którą realna konsumpcja:-jest liniowo zależna od produktu krajowego brutto,-ma charakter inercyjny,-jest korygowana w czasie.
Źródło:
Przedsiębiorstwo we współczesnej gospodarce - teoria i praktyka; 2019, 2, 29; 27-57
2084-6495
Pojawia się w:
Przedsiębiorstwo we współczesnej gospodarce - teoria i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Praca oczami etyka. Perspektywa personalistyczna
Autorzy:
Szostek, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/611235.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:
work ethics
Biblical model of work
John Paul II’s personalistic view of work
error of economism with regard to work
kinds of work with regard to their results
unemployment
etyka pracy
biblijny model pracy
personalistyczna koncepcja pracy Jana Pawła II
błąd ekonomizmu w traktowaniu pracy
rodzaje pracy ze względu na jej efekty
bezrobocie
Opis:
After a preliminary definition of work as employment for profit, a more profound sense of work is investigated, one that is personalistic, i.e. broader than Christian. The following questions are asked: Can work strengthen a person and uphold them in their personalistic humanness, and if so, how? Or, how can it belittle a person, blocking their personal development? Answers are sought in the Bible and in John Paul II’s anthropology of work. The ideal personalistic model of human work is recalled, one found in the Book of Genesis, with its four truth-postulates: (i) the permission to “subdue” the earth, i.e. to continue the act of creation, must not lead to the earth’s degradation; (ii) the cultivation of Eden must involve a harmonious coexistence of technology and nature; (iii) the mission of ruling the world must contribute to the development of humans; (iv) work must strengthen human relations.The second part of the article is devoted to selected contemporary problems and challenges connected with the ethos of work: a tendency to reduce the value of work to its mere economic effects (the error of capitalist economism, perservering now in globalization); unemployment, caused by technological development and a greater use of automata, which may lead to unacceptable exclusion of the unemployed from human communities.
Autor, wychodząc od definicji pracy jako działalności zarobkowej, sięga do korzeni pojęcia głębszych niż jej zarobkowy wymiar, przyjmuje za punkt wyjścia perspektywę personalistyczną, szerszą niż chrześcijańska, i stawia pytanie: „Czy i czym praca umacnia i buduje człowieka w jego osobowym człowieczeństwie, czym zaś go może pomniejszać, blokując jego osobowy rozwój?” Odpowiedzi szuka w przekazie biblijnym i antropologii pracy proponowanej przez Jana Pawła II. Przypomina personalistyczny (idealny) model ludzkiej pracy przedstawiony w Księdze Rodzaju i cztery zawarte w nim prawdy-postulaty: by zobowiązanie do „czynienia sobie ziemi poddaną”, czyli kontynuowania „dzieła tworzenia”, nie prowadziło do degradacji środowiska; by uprawiając „ogród Eden”, harmonijnie łączyć technikę z naturą; by misja panowania nad światem służyła rozwojowi samego człowieka i po czwarte, by praca budowała więzi międzyludzkie.W drugiej części artykułu autor omawia niektóre współczesne realne trudności i wyzwania związane z etosem pracy: skłonność do sprowadzania wartości pracy wyłącznie do jej ekonomicznych efektów (błąd kapitalistycznego ekonomizmu kontynuowany dziś w ramach procesu globalizacji); bezrobocie wynikające z postępu naukowo-technicznego i zastępowania człowieka przez roboty, grożące niedającym się zaakceptować wykluczaniem bezrobotnych ze wspólnoty ludzkiej.
Źródło:
Etnolingwistyka. Problemy Języka i Kultury; 2015, 27
0860-8032
Pojawia się w:
Etnolingwistyka. Problemy Języka i Kultury
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-96 z 96

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies