Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "biosorption" wg kryterium: Temat


Wyświetlanie 1-58 z 58
Tytuł:
Biosorption Capacity of Activated Sludge Sand Bed for Removal of Copper from Treated Wastewater
Autorzy:
Trybułowski, Łukasz
Rogowska, Weronika
Zakrzewski, Jakub
Powiązania:
https://bibliotekanauki.pl/articles/2027810.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
copper ions
biosorption
wastewater
Opis:
In this paper, the biosorption capacity of activated sludge sand bed was investigated for copper removal from wastewater. A sand bed consisting of three layers was used for the study: (1) filter gravel with a diameter of 2 to 3 mm, (2) a biological part inoculated with 200 ml of flocculent activated sludge with a dry weight of 5 kg/$m^3$, (3) filter sand with a grain diameter of about 3 mm. The filter was fed with model wastewater prepared with sodium acetate, potassium nitrate, ammonium chloride, and potassium dihydrogen phosphate I and II basic. The source of Cu ions in the wastewater was $CuSO_4$. The model wastewater used in this study was collected every 24 hours. The experiment was terminated when the concentration of Cu in the treated wastewater sample was equal to that in the treated wastewater. Such a phenomenon was indicative of the depletion of the sorption capacity of the tested bed, which was observed after 26 days. The concentration of copper in raw and effluent from the bed was studied using atomic absorption spectroscopy (ASA) in samples mineralized in nitric acid ($HNO_3$) with the addition of perhydrol ($H_2O_2$). Two equilibrium models, Langmuir and Freudlich, were analyzed to study the absorption isotherms.
Źródło:
Journal of Ecological Engineering; 2022, 23, 2; 61-69
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Supporting the process of removing humic substances on activated carbon
Autorzy:
Olesiak, Paulina
Stępniak, Longina
Powiązania:
https://bibliotekanauki.pl/articles/1039200.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
water treatment
biosorption
biodegradation
ultrasounds
Opis:
This study is focused on biosorption process used in water treatment. The process has a number of advantages and a lot of research has been done into its intensification by means of ultrasonic modification of solutions. The study carried out by the authors leads to the conclusion that sonication of organic solutions allows for extension of the time of operation of carbon beds. For the analysis of the results obtained during the sorption of humic substances (HS) from the solution dependencies UV/UV0 or DOC/DOC0 were used. In comparative studies the effectiveness of sorption and sonosorption (UV/UV0) shows that the share of ultrasounds (US) is beneficial for extension of time deposit, both at a flow rate HS solution equal to 1 m/h and 5 m/h. Analysis of the US impact sorption on HS sorption in a biological fluidized bed, both prepared from biopreparat and the activated sludge confirms the higher efficiency compared to sonobiosorption than biosorption. These results confirm the degree of reduction UV254/UV0 and DOC/DOC0 for the same processes. EMS index also confirms the improvement of HSbiodegradation by sludge microorganisms.
Źródło:
Acta Biochimica Polonica; 2014, 61, 4; 711-716
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of dead and living fungal biomass for removal of hexavalent chromium
Autorzy:
Holda, A.
Mlynarczykowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/109742.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
hexavalent chromium
Aspergillus niger
biosorption
bioaccumulation
Opis:
The removal of hexavalent chromium from aqueous solution was carried out in batch experiments using dead and living biomass of Aspergillus niger. The effects of the operating parameters such as influent Cr(VI) concentration, influent pH and biomass concentration on the Cr(VI) reduction were investigated. The results indicates that the removal rate of Cr(VI) increased with a decrease in pH or with increase of Cr(VI) and biomass concentrations. For chromium bioaccumulation along with nutrients the process is the most intensive within the first 5 days of mycelium formation. For biosorption, the greatest binding of this metal is achieved within the first 4 days of the process.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 2; 551-563
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reduction and Biosorption of Cr(VI) from Aqueous Solutions by Acid- -Modifi ed Guava Seeds: Kinetic and Equilibrium Studies
Autorzy:
Ortíz-Gutiérrez, Marel
Alfaro-Cuevas-Villanueva, Ruth
Martínez-Miranda, Verónica
Hernández-Cristóbal, Orlando
Cortés-Martínez, Raúl
Powiązania:
https://bibliotekanauki.pl/articles/778567.pdf
Data publikacji:
2020
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Guava seeds
chromium reduction
biosorption
isotherms
Opis:
The use of guava seeds (GS) and acid-modified guava seeds (MGS) for the removal of Cr(VI) from aqueous solutions was investigated. Batch-type experiments were performed with Cr(VI) aqueous solutions and biosorbents to determine the kinetic and equilibrium sorption parameters. Results indicated that GS and MGS were capable of reducing and remove Cr(VI) from solutions, but the reduction was only observed at some experimental conditions. Infrared analysis showed that several functional groups were involved in the reduction, and biosorption of Cr(VI), particularly alcohol, phenolic, carboxylic, and methoxymethyl structures. The mechanisms of reduction and biosorption depended upon the type of biosorbent, pH, and temperature of the system. The pseudo-second-order kinetic model describes the kinetic sorption data, and the Langmuir-Freundlich (L-F) model describes the isotherm data in most cases. Significantly high total chromium biosorption capacities were obtained. Acid modification of guava seeds improves chromium biosorption performance.
Źródło:
Polish Journal of Chemical Technology; 2020, 22, 4; 36-47
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of Ni(II) Ions by Citric Acid-Functionalised Aloe vera Leaf Powder – Characterisation, Kinetics, and Isotherm Studies
Autorzy:
Al-Amrani, Waheeba Ahmed
Abdullah, Rohaizan
Megat Hanafiah, Megat Ahmad Kamal
Suah, Faiz Bukhari Mohd
Powiązania:
https://bibliotekanauki.pl/articles/24201761.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
Aloe vera
biosorption
isotherm
nickel
wastewater
Opis:
Aloe vera leaves (AVL), a by-product of agricultural waste, have been applied as a biosorbent for reducing Ni(II) ions in aqueous solutions. The biosorption capability of AVL powder was enhanced through chemical treatment with 0.10 M citric acid solution. Fourier-transform infrared (FTIR) spectrophotometer, scanning electron microscope coupled with energy dispersive X-ray (SEM-EDX), pH of point-zero-charge (pHPZC), and pHslurry analyses were used to study the surface, and chemical properties of citric acid-treated Aloe vera leaf powder (CAAVLP). The setting for experiments such as pH solution, CAAVLP dose, initial concentration, and biosorption time was investigated. Maximum Ni(II) ion biosorption capability was determined to be 48.65 mg/g based on the Langmuir model at pH 6, a CAAVLP dose of 0.02 g, initial Ni(II) concentrations of 5 to 50 mg/L and biosorption time of 120 min. The data for the isotherm and kinetics were well matched with the Freundlich and pseudo-second-order models, respectively, with high regression correlation (R2) and low chi-square (χ2) values. The presence of more-COOH groups after treating AVL with citric acid resulted in more Ni(II) ions being able to be removed.
Źródło:
Journal of Ecological Engineering; 2023, 24, 4; 217--227
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sorption of selected radionuclides from liquid radioactive waste by sorbents of biological origin : the alkaline earth alginates
Autorzy:
Fuks, Leon
Oszczak-Nowińska, Agata
Powiązania:
https://bibliotekanauki.pl/articles/2055671.pdf
Data publikacji:
2021
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
alginates
biosorption
radionuclides
caesium
strontium
americium
Opis:
The sorption of 241Am3+, 85Sr2+ and 137Cs+ by calcium, strontium and barium alginates has been studied under different operation conditions. The most prominent adsorption was found in the pH range of 5–6 for all systems, even if the observed dependence on the acidity of the solution was small. The most favourable time for the adsorption process was found to be about 2 h for calcium alginate and 4 h for the other two sorbents.
Źródło:
Nukleonika; 2021, 66, 4; 153--158
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simultaneous adsorption of heavy metals from water by novel lemon-peel based biomaterial
Autorzy:
Šabanović, Elma
Memić, Mustafa
Sulejmanović, Jasmina
Selović, Alisa
Powiązania:
https://bibliotekanauki.pl/articles/778437.pdf
Data publikacji:
2020
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
lemon peel
heavy metals
biosorption
FAAS
Opis:
Simultaneous adsorption of heavy metals in complex multi metal system is insuffnciently explored. This research gives results of key process parameters optimization for simultaneous removal of Cd(II), Co(II), Cr(III), Cu(II), Mn(II), Ni(II) and Pb(II) from aqueous solution (batch system). New lemon peel-based biomaterial was prepared and characterized by infrared spectroscopy with Fourier transformation (FTIR), scanning electron microscopy (SEM), electron dispersive spectroscopy (EDS), while the quantifi cation of metals was made by atomic absorption spectrometry (AAS). Simultaneous removal of seven metals ions was favorable at pH 5 with 300 mg/50 mL solidliquid phase ratio, within 60 min at room temperature with total obtained adsorption capacity of 46.77 mg g–1. Kinetic modeling showed that pseudo-second order kinetic and Weber-Morris diffusion models best describe the adsorption mechanism of all seven heavy metals onto lemon peel.
Źródło:
Polish Journal of Chemical Technology; 2020, 22, 1; 46-53
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Radiostrontium uptake by lichen Hypogymnia physodes
Autorzy:
Pipíška, M.
Horník, M.
Kočiová, M.
Augustín, J.
Lesný, J.
Powiązania:
https://bibliotekanauki.pl/articles/146396.pdf
Data publikacji:
2005
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
85Sr
Hypogymnia physodes
biosorption
kinetics
desorption
Opis:
Radiostrontium 85Sr sorption experiments were carried out at 4°C and 20°C using natural samples of the epiphytic foliose lichen Hypogymnia physodes. Thalli were incubated in water solutions containing 10 5 to 10 1 mol.l 1 SrCl2 for up to 24 h at the initial pH 5.5. Sorption equilibrium at 4°C and 20°C was observed within 1 hour and did not change within the next 24 hours. Sorption process can be described well by Freundlich adsorption isotherm in both linearised and non-linearised form, not by Langmuir adsorption isotherm. Inactivation of lichen biomass by formaldehyde or temperature pretreatment did not cause loss of biosorption activity. 85Sr biosorption was strongly pH dependent increased from negligible values at pH 2 up to nearly 100% uptake at pH 5.5. Bivalent cations Me2+ act as competitors for 85Sr biosorption with the competition effect increasing in the order Co < Mg < Ca < Cd < Ni < Ba < Zn < Cu for Me2+ concentration 0.01 mol.l 1. A number of displacing agents have been tested for their ability to release extracellular bound 85Sr2+ ions from Hypogymnia physodes. Displacing efficiency increases in the order: water <<< EDTA (acid) < NaHCO3 < Na2EDTA < oxalic acid < BaCl2 < MgCl2 < CaCl2 < SrCl2. Efficiency of strontium biosorption by different lichen taxa will reveal their role in fixation of radiostrontium contamination in biosphere.
Źródło:
Nukleonika; 2005, 50,suppl.1; 39-44
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of Pb(II) by the resistant Enterobacter sp. : Investigated by kinetics, equilibrium and thermodynamics
Autorzy:
Liu, Lei
Xia, Mengya
Hao, Jianwen
Xu, Haoxi
Song, Wencheng
Powiązania:
https://bibliotekanauki.pl/articles/2073764.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Pb(II)
biosorption
enterobacter sp.
kinetics
thermodynamics
Opis:
The Pb(II)-resistant bacterium was isolated from heavy metal-contained soils and used as a biosorbent to remove Pb(II). The strain was identified as Enterobacter sp. based on the 16S rRNA sequence analysis. The effect of biosorption properties (pH value, Pb(II) concentration, bacterial concentration and temperature) on Pb(II) was investigated by batch experiments. Results of FTIR and XPS showed that the biosorption process mainly involved some oxygen-containing groups (-OH and -COOH groups). The experimental results and equilibrium data were fitted by pseudo-second-order kinetic model and Langmuir model, respectively. The experimental biosorption isotherms fitted the Langmuir model, and the maximum biosorption capacity was 40.75 mg/g at 298 K. The calculated ΔGо and ΔHо were –4.06 and 14.91(kJ/mol), respectively, which indicated that biosorption process was spontaneous and endothermic. Results show that Enterobacter sp. will be an efficient biosorbent for Pb(II) removal.
Źródło:
Archives of Environmental Protection; 2021, 47, 3; 28--36
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Observations and Assessment of Landfill Leachate Bioremediation by Autochthonous Fungi Species and their Effective Geoactivities
Autorzy:
Muksy, Renjbar
Kolo, Kamal
Powiązania:
https://bibliotekanauki.pl/articles/2202342.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
autochthonous fungi
pathogenic fungi
biosorption
biomineralization
decolorization
Opis:
Autochthonous fungi are potential successful agents in the process of bioremediation through their efficient adaptation to pollutant toxicity and competition with other microorganisms that are present in the leachate treatment plant. The leachate from municipal waste landfills was an important source of fungi. Even though some of these fungi have the potential to be human pathogens, such strains wh en used in biolo gical treatment approaches may serve as a possible tool for integrating the leachate bioremediation process because of the extracellular enzymes produced by fungal strains. In this study, the leachate sample was tested with regard to four parameters, including total dissolved solids (TDS), electrical conductivity (EC), pH, and the decolorization of the leachate sample by a number of indigenous species of fungi, which were observed by use of the culture techniques. The scanning electron microscope coupled with energy dispersive x-ray analysis, UV-spectrum, and reflected and transmitted polarizing light microscope were used in the research project to o bserve and assess the obtained data from the experimental work. The results indicated the various levels of efficiency of the isolated fungal strains in eliminating color, lowering TDS, EC, and pH through their geoactivities potential in metal biosorption and immobilization by biomineralization of new minerals in the growth environment and eventually reducing the metal bioavailability and toxicity.
Źródło:
Journal of Ecological Engineering; 2023, 24, 1; 312--327
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of nickel (II) and zinc (II) from aqueous solutions by the biomass of yeast Yarrowia lipolytica
Autorzy:
Wierzba, S.
Powiązania:
https://bibliotekanauki.pl/articles/778166.pdf
Data publikacji:
2017
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
biosorption
adsorption isotherms
zinc
nickel
Yarrowia lipolytica
Opis:
This study examined the biosorption process of Ni(II) and Zn(II) from an aqueous solution by dead biomass of Yarrowia lipolytica. Optimum biosorption conditions were determined as a function of pH, biomass dosage, contact time, and temperature. The biosorbent was characterized by FTIR, which indicated the participation of hydroxyl, carboxyl, amide and amine groups in the process of binding the metal ions. The results showed that the biosorption processes of both metal ions closely followed pseudo-second order kinetics. The equilibrium data of Ni(II) and Zn(II) ions at 20, 30 and 40°C fitted the Langmuir and Freundlich isotherm models. Langmuir isotherm provided a better fit to the equilibrium data, with a maximum biosorption capacity of the Y. lipolytica biomass for Ni(II) and Zn(II) of 30.12 and 44.44 mg/g respectively. The calculated thermodynamic parameters demonstrated that the biosorption of Ni(II) and Zn(II) ions onto the Y. lipolytica was feasible, spontaneous and endothermic.
Źródło:
Polish Journal of Chemical Technology; 2017, 19, 1; 1-10
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetic studies for the biosorption of chromium using cherry leaves (Muntingia calabura L.)
Autorzy:
Aathithya, R.
Sowparnika, J.R.
Balakrishnan, V.
Powiązania:
https://bibliotekanauki.pl/articles/10873.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
kinetics
biosorption
chromium
cherry
leaf
Muntingia calabura
Opis:
Biosorption is an attractive technology which is used for the sorption of substances by a biomaterial. In this present work the heavy metal chromium was subjected to biosorption because of their non-degradability nature and causes water and land pollution. Cherry leaves were used as a biomaterial for the biosorption. Kinetic studies were performed for the biosorption experiment. From the experiment it was found that the reaction follows pseudo first order reaction because of the larger value of regression coefficient R2 and lower value of standard errors (χ2) for pseudo first order reaction than second order reaction.
Źródło:
International Letters of Natural Sciences; 2014, 20
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of Ni(II), Pb(II) and Zn(II) on calcium alginate beads: equilibrium, kinetic and mechanism studies
Autorzy:
Nastaj, J.
Przewłocka, A.
Rajkowska-Myśliwiec, M.
Powiązania:
https://bibliotekanauki.pl/articles/778617.pdf
Data publikacji:
2016
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
biosorption
heavy metal
nickel
lead
zinc
alginate
Opis:
The biosorption process of three divalent metal ions – nickel, lead and zinc- from on calcium alginate from aqueous solution was studied, in single component systems. The biosorbent were investigated by Fourier Transform Infrared Spectroscopy. The batch mode experiments of the adsorption process were carried out as a function of pH, initial metal ions concentration, sorbent dosage and contact time. The adsorption influencing parameters for the maximum removal of metal ions were optimized. The experimental data were analyzed using the Langmuir, Freundlich, Langmuir-Freundlich, Koble-Corrigan and Redlich-Peterson models. The kinetic data of biosorption process were evaluated using pseudo-first and pseudo-second order equations. The Weber and Morris model was employed to interpret the metal ions diffusion in biosorption process.
Źródło:
Polish Journal of Chemical Technology; 2016, 18, 3; 81-87
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of lead(II), zinc(II) and nickel(II) from industrial wastewater by Stenotrophomonas maltophilia and Bacillus subtilis
Autorzy:
Wierzba, S.
Powiązania:
https://bibliotekanauki.pl/articles/779652.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
heavy metals
biosorption
Bacillus subtilis
Stenotrophomonas maltophilia
Opis:
The biosorption of Pb(II), Zn(II) and Ni(II) from industrial wastewater using Stenotrophomonas maltophilia and Bacillus subtilis was investigated under various experimental conditions regarding pH, metal concentration and contact time. The optimum pH values for the biosorption of the three metals were in the range 5.0-6.0, while the optimal contact time for the two bacterial species was 30 min. Experimental data was analyzed using Langmuir and Freundlich isotherms; the former had a better fit for the biosorption of Pb(II), Zn(II) and Ni(II). The maximum adsorption uptakes (qmax) of the three metals calculated from the Langmuir biosorption equation for S. maltophilia were 133.3, 47.8 and 54.3 for Pb(II), Zn(II) and Ni(II), respectively, and for B. subtilis were 166.7, 49.7 and 57.8 mg/g, respectively. B. subtilis biomass was more favorable for the biosorption of Pb (II) and Ni (II), while S. maltophilia was more useful for the biosorption of Zn (II).
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 1; 79-87
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Increasing Effectiveness of Heavy Metal Sorption by Biosorbent Microalgae Beads
Autorzy:
Rinanti, Astri
Fachrul, Melati Ferianita
Hadisoebroto, Rositayanti
Minarti, Astari
Sunaryo, Thalia
Powiązania:
https://bibliotekanauki.pl/articles/2173268.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
bead
sorbent
biosorption
functional group
heavy metal
Opis:
This research was conducted to overcome the Cu2+ heavy metal pollution in the environment through a biotechnological approach with heavy metal sorption process by microalgae beads. Biosorbent in form of beads was produced from Chlorella sorokiniana, Monoraphidium sp., and Scenedesmus obliquus tropical microalgae mobilized with Naalginate polymer. The sorption process is observed on a controlled batch culture with variations of temperature (25, 35, and 45 °C), and observation periods (200th, 220th, 250th, 270th min) as contact time. The absorption efficiency on each temperature variation reaches more than 90%, but the highest absorption efficiency rate is at 92.20% on 35 °C temperature and 200 minutes of contact time. Biosorbent beads with 2–3 mm of diameters show the best sorption ability than the 3–4 mm and 4–5 mm ones. Sorption process is also evident with the existence of intensity alteration on amide, ketone, and sulfhydryl function groups which were consistently weakened until the end of the sorption process. The beads utilized in this research are potentially reusable as biosorbent. Thus, further examination is required to acknowledge the maximum reutilization rate of the beads as biosorbent on heavy metal absorption process.
Źródło:
Journal of Ecological Engineering; 2022, 23, 7; 50--57
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of temperature, bed height, and particle size on Ni(II) removal in a continuous system: Modelling the break curve
Autorzy:
Villabona-Ortíz, Ángel
Tejada-Tovar, Candelaria
Ortega-Toro, Rodrigo
Peña-Romero, Keily
Botello-Urbiñez, Ciro
Powiązania:
https://bibliotekanauki.pl/articles/2073755.pdf
Data publikacji:
2022
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
biosorption
Dose–Response model
packed bed
Thomas model
Opis:
The objective of this research was to evaluate the adsorption capacity of the shell biomass (Dioscorea rotundata), taking into account the impact of temperature, bed height, and particle size on the removal of nickel(II) ions in aqueous solution in a continuous fixed-bed column system; performing the modelling of the break curve. The biomass was characterised by SEM-EDS analysis. The analysis found that it represents a rough, heterogeneous structure, rich in carbon and oxygen, with mesopores, and is suitable for removing heavy metals. It also determined the optimum parameters of the bed height, particle size, and temperature, keeping the pH and the initial concentration of the solution constant. The results revealed that the bed height and the particle size are the two most influential variables in the process. Ni(II) removal efficiencies range between 85.8 and 98.43%. It was found that the optimal conditions to maximise the efficiency of the process are temperature of 70°C, 1.22 mm particle size, and 124 mm bed height. The break curve was evaluated by fitting the experimental data to the Thomas, Adams-Bohart, Dose-Response, and Yoon-Nelson models, with the Dose-Response model showing the best affinity with a coefficient of determination R2 of 0.9996. The results obtained in this research showed that yam shell could be suggested as an alternative for use in the removal of Ni(II) ions present in an aqueous solution in a continuous system.
Źródło:
Journal of Water and Land Development; 2022, 52; 257--264
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of Chromium by Living Cells of Azotobacter s8, Bacillus subtilis and Pseudomonas aeruginosa using Batch System Reactor
Autorzy:
Kurniawan, Setyo Budi
Imron, Muhammad Fauzul
Purwanti, Ipung Fitri
Powiązania:
https://bibliotekanauki.pl/articles/123932.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
Azotobacter
Bacillus subtilis
bacteria
biosorption
Cr
Pseudomonas Putida
Opis:
Chromium in wastewater is classified as one of the dangerous contaminants that require further treatment before being discharged to water body. The concentration of chromium in water body, especially river, has increased as many industries utilize chromium as raw material and then discharge their wastewater without any treatment. Biosorption is one of methods that are widely used to treat heavy metal containing wastewater. Bacteria are the most common microorganisms to be used as heavy metal treatment agent. Azotobacter s8, Bacillus subtilis and Pseudomonas putida had been proven to have a heavy metal resistant capability. The screening test showed that Minimum Inhibitory Concentration (MIC) value of chromium for all bacteria ranged from 100 to 250 mg/L of CrCl3. The chromium biosorption test by bacteria showed that Azotobacter s8 was able to remove 10.53%, and Bacillus subtilis was able to remove 5.68% chromium from 50 mg/L initial concentration, while Pseudomonas putida showed no chromium removal. The chromium biosorption capacity by Azotobacter s8 was 580.08 mg/g and 349.30 mg/g for Bacillus subtilis.
Źródło:
Journal of Ecological Engineering; 2019, 20, 6; 184-189
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Chitosan microspheres prepared by membrane emulsification for chromium removal from aqueous solutions
Autorzy:
Wolska, Joanna
Powiązania:
https://bibliotekanauki.pl/articles/1034646.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
biosorption
chitosan
chromium VI
membrane emulsification
microspheres
modification
Opis:
Chitosan is naturally abundant biopolymer that could be used as chelating sorbent for removal of metal ions from aqueous solutions. In this study the uniform-sized chitosan microspheres and their modified derivatives were prepared by using the one stage membrane emulsification process. The obtained sorbents were used for removal of chromium VI ions. The sorption evaluation was carried out at different initial ion concentrations and allowed to fit the experimental data to Langmuir isotherm in the case of unmodified materials and to Freundlich isotherm in the case of modified microspheres. The highest sorption towards chromium has been shown by unmodified chitosan with medium molecular weight. The calculated maximum sorption capacity for this polymer was found to be 1.6 mmol/g.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2016, 21; 203-216
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization with response surface methodology of biosorption conditions of Hg(II) ions from aqueous media by Polyporus Squamosus fungi as a new biosorbent
Autorzy:
Uzun, Y.
Şahan, T.
Powiązania:
https://bibliotekanauki.pl/articles/205265.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
biosorption
mercury
optimization
Polyporus squamosus
response surface methodology
Opis:
Removal of mercury(II) (Hg(II)) from aqueous media by a new biosorbent was carried out. Natural Polyporus squamosus fungus, which according to the literature has not been used for the purpose of Hg(II) biosorption before, was utilized as a low-cost biosorbent, and the biosorption conditions were analyzed by response surface methodology (RSM). Medium parameters which were expected to affect the biosorption of Hg(II) were determined to be initial pH, initial Hg(II) concentration (Co), temperature (T (°C)), and contact time (min). All experiments were carried out in a batch system using 250 mL flasks containing 100 mL solution with a magnetic stirrer. The Hg(II) concentrations remaining in filtration solutions after biosorption were analyzed using Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). Based on the RSM results, the optimal conditions were found to be 5.30, 47.39 mg/L, 20°C and 254.9 min for pH, Co, T (°C), and contact time, respectively. Under these optimal conditions, the maximum biosorbed amount and the biosorption yield were calculated to be 3.54 mg/g and 35.37%, respectively. This result was confirmed by experiments. This result shows that Polyporus squamosus has a specific affinity for Hg ions. Under optimal conditions, by increasing the amount of Polyporus squamosus used, it can be concluded that all Hg ions will be removed.
Źródło:
Archives of Environmental Protection; 2017, 43, 2; 37-43
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The use of organic waste for removing Pb2+ ions from aqueous solutions
Wykorzystanie odpadów organicznych do usuwania jonów Pb2+ z roztworów wodnych
Autorzy:
Gala, A.
Sanak-Rydlewska, S.
Powiązania:
https://bibliotekanauki.pl/articles/217002.pdf
Data publikacji:
2009
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
odpady
metale toksyczne
biosorpcja
wastes
heavy metals
biosorption
Opis:
This article presents the use of organic waste substances for the sorption of toxic metal ions from aqueous solutions. Experiments were conducted concerning the sorption of Pb2+ ions on plum stones to study the effect of various factors, such as the pH, the quantity and particle size distribution of the natural sorbent, and the concentration of ions undergoing adsorption in the solution to be purified. Optimal conditions for adsorption were selected (a pH of 4.0, an amount of biosorbent of 10 g and the particle size class of plum stones (1.25-2.50) mm). Pb2+ ions were shown to undergo chemisorption with an efficiency of 60 to 99%. The process of Pb2+ ion sorption on the natural sorbent studied was described by the Langmuir and Freundlich model.
W artykule zaprezentowano zastosowanie odpadowych substancji pochodzenia organicznego do sorpcji jonów metali toksycznych z roztworów wodnych. Wykonano doświadczenia dotyczące sorpcji jonów Pb2+ na pestkach śliwek w zależności od szeregu czynników takich jak: wartość pH środowiska, ilość i klasa ziarnowa sorbentu naturalnego oraz stężenie adsorbowanych jonów w roztworze poddawanym oczyszczaniu. Dobrano optymalne warunki przeprowadzania procesu adsorpcji (pH środowiska 4,0; ilość biosorbentu 10 g oraz klasa ziarnowa pestek (1,25-2,50) mm). Wykazano, że jony Pb2+ sorbują się chemicznie w wydajnością od 60 do 99%. Proces adsorpcji jonów Pb2+ na badanym sorbencie naturalnym opisano za pomocą modelu Langmuira i Freundlicha.
Źródło:
Gospodarka Surowcami Mineralnymi; 2009, 25, 2; 47-59
0860-0953
Pojawia się w:
Gospodarka Surowcami Mineralnymi
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heavy metals biosorption from aqueous solution by Pseudomonas sp. G1
Biosorpcja metali ciężkich z roztworów wodnych przez Pseudomonas sp. G1
Autorzy:
Wierzba, S.
Powiązania:
https://bibliotekanauki.pl/articles/127402.pdf
Data publikacji:
2010
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
biosorption
copper
zink
Pseudomonas sp.
biosorpcja
miedź
cynk
Opis:
The objectives of the study are to compare the living and non-living cells of Pseudomonas sp. G1 in their removal capacity of Cu(II) and Zn(II). For these purposes, the removal capacity, desorption efficiency of living and non-living cells and various factors affecting the adsorption, such as reaction time, initial pH of the solution and metal concentration were determined. It was found that the optimum pH value for Cu(II) removal by living and nonliving cells was 5.0, while it was 6.0 and 5.0, respectively, for Zn(II) removal. The binding capacity by living cells is significantly higher than that of dead cells at tested conditions. Most of the metal adsorption occurred during the first 10 min. Moreover, desorption efficiency of Cu(II) and Zn(II) by living cells was 76.3 and 68.4% under 0.1 M HCl and it was 93.1 and 86.5% by non-living cells, respectively.
Celem prowadzonych badań było porównanie zdolności biosorpcji Cu(II) i Zn(II) ze ścieków przez żywe i martwe komórki Pseudomonas sp. G1. Zakres pracy obejmował ocenę efektywności sorpcji i desorpcji metali przez żywe i martwe komórki oraz wpływ na nią takich parametrów, jak: czas reakcji, wartość pH i stężenie metali w roztworze. Stwierdzono, że optymalne pH dla procesu biosorpcji Cu(II) przez żywne i martwe komórki wynosi 5,0, natomiast w przypadku Zn(II) odpowiednio 6,0 i 5,0. W warunkach doświadczenia komórki żywe wykazywały znacznie większą zdolność do usuwania jonów metali ciężkich niż komórki martwe. Większość jonów metali została zaadsorbowana w ciągu pierwszych 10 minut trwania doświadczenia. Ponadto efektywność procesu desorpcji Cu(II) i Zn(II) za pomocą 0.1 M HCl wynosiła dla żywych komórek 76,3 i 68,4%, a dla martwych odpowiednio 93,1 i 86,5%.
Źródło:
Proceedings of ECOpole; 2010, 4, 1; 85-89
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of Lead and Cadmium Ions on the Green Parts of Daucus Carota
Bioserpcja jonów ołowiu I kadmu na zielonych częściach marchwi Daucus Carota
Autorzy:
Mucha, Martin
Powiązania:
https://bibliotekanauki.pl/articles/318440.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
biosorption
carrot
lead
cadmium
biosorpcja
marchew
ołów
kadm
Opis:
This study deals with utilization of milled stems and leaves of carrot (Daucus carota) for the adsorptive removal of Pb(II) and Cd(II) from the aqueous solution. Carrot was bought in the local grocery, it was dried at the laboratory temperature and milled. Prepared material was analysed by the infrared spectrometry which confirms good structural homogeneity of the sample. Kinetic measurements were performed for estimation of adsorption equilibrium time. Equilibrium of Pb(II) adsorption was established after 6 hours of contact time, equilibrium of Cd(II) adsorption was established after 24 hours of contact time. The isotherms’ measurements were realized with the contact time 24 hours for the estimation of adsorption capacities of the studied sorbent. Adsorption capacities were around 47 mg/g for Cd(II) and 154 mg/g for Pb(II). Changes of pH values of the sorption solutions were negligible but some amount of Ca(II), Mg(II), K(I) and Na(I) ions was released to the solution during adsorption process. Daucus carota stems and leaves exhibit good sorption capacities and they could be utilized for adsorptive removal of Pb(II) and Cd(II) ions from the aqueous solutions.
Artykuł dotyczy wykorzystania zmielonych łodyg i liści marchwi (Daucus carota) do adsorpcyjnego usuwania Pb (II) i Cd (II) z roztworu wodnego. Marchewkę kupiono w lokalnym sklepie spożywczym, wysuszono w laboratorium i zmielono. Przygotowany materiał analizowano za pomocą spektrometrii w podczerwieni, co potwierdziło dobrą jednorodność strukturalną próbki. Pomiary kinetyczne przeprowadzono w celu oszacowania czasu osiągnięcia równowagi adsorpcji. Równowagę adsorpcji Pb (II) ustalono po 6 godzinach czasu kontaktu, równowagę adsorpcji Cd (II) ustalono po 24 godzinach czasu kontaktu. Pomiary izoterm wykonano z czasem kontaktu 24 godziny w celu oszacowania zdolności adsorpcji badanego sorbentu. Zdolności adsorpcyjne wynosiły około 47 mg / g dla Cd (II) i 154 mg / g dla Pb (II). Zmiany wartości pH roztworów sorpcyjnych były znikome, ale pewna ilość jonów Ca (II), Mg (II), K (I) i Na (I) została uwolniona do roztworu podczas procesu adsorpcji. Łodygi i liście Daucus carota wykazują dobre zdolności sorpcyjne i można je wykorzystać do adsorpcyjnego usuwania jonów Pb (II) i Cd (II) z roztworów wodnych.
Źródło:
Inżynieria Mineralna; 2020, 2, 1; 139-143
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of aniline blue from aqueous solution using a novel biosorbent Zizyphus oenoplia seeds: Modeling studies
Autorzy:
Kumar, M.
Elangovan, G
Tamilarasan, R
Vijayakumar, G.
Mukeshkumar, P. C.
Sendhilnathan, S.
Powiązania:
https://bibliotekanauki.pl/articles/778750.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
aniline blue
removal
biosorption
Zizyphus oenoplia seed
modeling
Opis:
This article presents the feasibility for the removal of Aniline Blue dye (AB dye) from aqueous solution using a low cost biosorbent material Zizyphus oenoplia seeds. In this study, a batch mode experiments of the adsorption process were carried out as a function of pH, contact time, concentration of dye, adsorbent dosage and temperature. The experimental data were fitted with Freundlich and Langmuir isotherm equations. The feasibility of the isotherm was evaluated with dimensionless separation factor (RL). The kinetic data of sorption process are evaluated by using pseudo-first order and pseudo-second order equations. The mode of diffusion process was evaluated with intra-particle diffusion model. The thermodynamic parameters like change in enthalpy (ΔHº); change in entropy (ΔSº) and Gibbs free energy change (ΔGº) were calculated using Van’t Hoff plot. The biosorbent material was characterized with Fourier Transform Infrared (FTIR) spectroscopy and the morphology was identified with Scanning Electron Microscope (SEM) in before and after adsorption of AB dye.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 3; 70-77
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of chromium by biosorption method (chitosan)
Autorzy:
Abatneh, Y.
Sahu, O.
Powiązania:
https://bibliotekanauki.pl/articles/11428.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
removal
chromium
biosorption
chitosan
absorbent
polymer
water
rheological measurement
Opis:
Discharge of metal containing effluents into water has been a cause of major concern. Traditional treatment methods are proving to be ineffective and expensive. Chitosan was studied as a potential biosorbent due to its positive charge and relatively low cost. The study involves evaluating the metal binding performance of chitosan in a Polymer Enhanced Diafiltration (PEDF) system which uses an ultra filtration membrane to retain the chitosan which, in turn, binds the metal, thereby preventing passage into the permeate stream. Conditions for binding such as pH, concentration of polymer and chromium were studied. Optimal performance was obtained when the system was operated at pH values lower than the pKa of chitosan i.e. 6.3. Using 6 g/L chitosan at pH 4.0, chromium concentration was reduced to less than 1mg/L from a feed concentration of 20 mg/L. Equilibrium dialysis experiments were done to study the kinetics of binding and the uptake of metal per gram of polymer. Rheological measurements demonstrated that in the presence of 1-100 mM chromate, chitosan was found to be slightly shear thickening at low concentrations such as 4 g/L and 6 g/L whereas it was slightly shear thinning at higher concentrations like 12 g/L and 20 g/L This suggests that neutralization of chromium anions is due to the interaction of multiple chitosan molecules. This result is consistent with the relatively stiff nature of the polysaccharide. Overall, this study suggests that some modification of the native polymer would be required to improve uptake and make it an industrially workable process.
Źródło:
International Letters of Natural Sciences; 2014, 03
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of Pb(II) and Cd(II) ions from aqueous solutions with selected organic wastes
Autorzy:
Bozecka, A.
Bozecki, P.
Sanak-Rydlewska, S.
Powiązania:
https://bibliotekanauki.pl/articles/110900.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
biosorption
Pb(II)
Cd(II)
organic wastes
adsorption isotherms
Opis:
The authors investigated sorption of Pb(II) and Cd(II) ions from aqueous solutions on selected natural wastes: sunflower hulls, walnut shells and plum stones. The chemical and physical structure of the surface of these sorbents was determined using infrared spectrometry and scanning electron microscopy. The most favourable physicochemical parameters of the sorption processes were also defined. The sorption of Pb(II) and Cd(II) ions was described according to the Langmuir and Freundlich models. It has been shown that the adsorbents studied can be effectively used in removing heavy metals from aqueous solutions. The sunflower hulls have the highest sorption capacity for Pb(II) and Cd(II) ions. It is equal to 36.93 mg/g for the Pb(II) ions and 19.93 mg/g Cd(II) ions. The calculated values of thermodynamic functions indicate a spontaneous (ΔGº< 0) and exothermic (ΔHº< 0) nature of the sorption processes. A participation of ion exchange in these processes is significant. Desorption tests confirm that the adsorbed heavy metals can be recovered and the sorbent materials after regeneration can be reused.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 380-396
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of thermodynamic properties for the biosorption of chromium by using cherry leaves (Muntingia calabura L.)
Autorzy:
Aathithya, R.
Sowparnika, J.R.
Balakrishnan, V.
Powiązania:
https://bibliotekanauki.pl/articles/11897.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
thermodynamic property
biosorption
chromium
cherry
leaf
Muntingia calabura
entropy
Opis:
Chromium is a heavy metal which has widely used in tannery and electroplating industries. Contaminations of these industrial metals into the river possess major threat to an environment. Therefore, biosorption is a technique which is applied for the sorption of heavy metal by a biomaterial. In the present study reveals that cherry leaves was used as a biomaterial and for that the thermodynamic properties was evaluated for the biosorption of chromium. From the thermodynamic studies it was found that the reaction was feasible, spontaneous and exothermic because the values of ΔG = negative, ΔS = negative and ΔH = positive. So, it was concluded that the experiment was thermodynamically feasible.
Źródło:
International Letters of Natural Sciences; 2014, 20
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of phenol from wastewater using activated waste tea leaves
Autorzy:
Mohsin, K.
Anwar, R. S.
Nadeem, F.
Amir, Y.
Syed, W. A.
Powiązania:
https://bibliotekanauki.pl/articles/778237.pdf
Data publikacji:
2013
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
acid activation
batch study
biosorption
equilibrium study
kinetic study
Opis:
This investigation enumerates the treatment of phenol contaminated synthetic wastewater by Activated Waste Tea Leaves (AWTL). Phosphoric acid was used for the modification of waste tea leaves. The effects of initial pH, biosorbent dose, contact time, and initial phenol concentration were studied on the phenol uptake from the synthetic solution. Kinetic modelling was performed using pseudo 1st and 2nd order kinetics. The Langmuir and Freundlich’s Models were employed to interpret the AWTL behaviour at various mass transfer gradients. The results show that the optimum values for pH, biosorbent dose and contact time were 2.2 g/L and 180 minutes, respectively. Pseudo 2nd order kinetic and the Langmuir’s Models best described the kinetic and equilibrium behaviours, respectively.
Źródło:
Polish Journal of Chemical Technology; 2013, 15, 2; 1-6
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of Hexavalent Chromium from Aqueous Solution by the Pod of Acacia gerrardii
Autorzy:
Abdulaziz, Mohammed A.
Bakri, Abdulrahman A.
Al-Zahrani, Saleh A.
Al-Zahrani, Majed S.
Al-Lehebi, Abdulrahman N.
Banjar, Fadil M.
Nabag, Mohand I.
Powiązania:
https://bibliotekanauki.pl/articles/779613.pdf
Data publikacji:
2019
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Biosorption
chromium
Acacia gerrardii
isotherm models
Park kinetic models
Opis:
This study aims at investigating the potential of Acacia gerrardii pod for the removal of Cr(VI) in batch system. Effect of solution pH, biosorbent dosage, initial concentration of Cr(VI), contact time on the removal process was examined. Complete removal of hexavalent chromium was achieved at pH values 1.0 and 2.0 whereas maximum removal of total chromium was obtained at pH of 3.0. The study showed that the biosorption and bioreduction mechanisms were involved in the removal process. The time required for complete removal of Cr(VI) using the pod of Acacia gerrardii was shortened with an increase in biomaterial dosage and decrease in Cr(VI) concentration. Kinetic data was well described using Park kinetic model. Freundlich isotherm model adequately fitted the equilibrium data indication multilayer adsorption of total chromium on the surface of biomaterial. The pod of Acacia gerrardii could be used efficiently for the removal of hexavalent chromium from aqueous solutions.
Źródło:
Polish Journal of Chemical Technology; 2019, 21, 2; 14-19
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Utility of Chromobacterium violaceum SUK1a, an indigenous bacterial isolate for the bioremediation of Cr(VI)
Autorzy:
Prabhakaran, D. C.
Krishnan, S.
Ramamurthy, P. C.
Sivry, Y.
Quantin, C.
Subramanian, S.
Powiązania:
https://bibliotekanauki.pl/articles/109867.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
biosorption
bioremediation
chromium
bioreduction
Chromobacterium violaceum SUK1a
Opis:
The potential of an indigenous bacterial strain, Chromobacterium violaceum SUK1a, isolated from surface water samples collected from Sukinda Valley in Odisha, India, has been evaluated for the first time for the bioremediation of toxic hexavalent chromium (Cr(VI)) ions. The isolate was assessed for its Cr(VI) biosorption efficiency and the various parameters affecting the biosorption process were evaluated. A maximum Cr(VI) biosorption of about 50% was obtained, and the residual chromium was in the form of less toxic Cr(III). The Gibbs free energy of biosorption was determined to be -26.3 kJ/mol, suggestive of a chemisorption process. Additionally, the Cr(VI) biosorption by the isolate followed pseudo second order kinetics. FTIR spectral studies indicated that the surface functional groups present on the bacterial isolate such as, carboxyl, hydroxyl, amino, and phosphate groups were involved in the complexation of chromium ions with the bacterial cells. X-ray photoelectron spectroscopic studies on Cr(VI) interacted bacterial cells revealed an additional peak corresponding to Cr(III) in the Cr(2p) spectra. The surface charge of the bacterial cells subsequent to interaction with Cr(VI) were less negative compared to the pristine cells, which further substantiated the bioreduction of Cr(VI) to Cr(III). The bioremediation mechanism of Cr(VI) by the bacterial isolate is delineated to be governed by both biosorption and bioreduction processes under metabolism independent conditions. The results obtained indicate that the isolate can be a promising candidate for Cr(VI) bioremediation applications.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 4; 1266-1281
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of Cr(III) from aqueous solution by activated sludge
Biosorpcja Cr(III) z roztworów wodnych przez osad czynny
Autorzy:
Wierzba, S.
Korbecki, T.
Powiązania:
https://bibliotekanauki.pl/articles/387694.pdf
Data publikacji:
2016
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
activated sludge
biosorption
chromium(III)
osad czynny
biosorpcja
chrom(III)
Opis:
The biosorption of Cr(III) from aqueous solution using activated sludge (AS) microorganisms was investigated under various experimental conditions regarding pH and temperature. Biosorption equilibrium parameters were determined based on the Langmuir and Freundlich isotherm model. The kinetic parameters were established using the equations of pseudo-first order and pseudo-second order. Moreover thermodynamic parameters have been calculated. Langmuir isotherm provided a better fit to the equilibrium data. The maximum experimentally determined sorption capacity 26.95 mg · g–1 obtained at 25oC and pH 5.0. The kinetics model of pseudo-second order row has been better describing experimental data. The negative value of free Gibbs energy (ΔG0) proves spontaneous Cr(III) biosorption by AS biomass and its decreasing along with temperature increase. The negative value of enthalpy (ΔH0) and entropy (ΔS0) indicates exothermic process and limitation of degree of freedom Cr(III) ions on the interphase surface solution/biosorbent. FT-IR spectroscopy analysis indicated the contribution of carboxylate groups towards the biosorption of Cr(III) by AS.
W pracy badano proces biosorpcji jonów chromu(III) z roztworów wodnych przez mikroorganizmy osadu czynnego (OC), w różnych warunkach pH i temperatury. Parametry równowagowe biosorpcji wyznaczono w oparciu o modele izoterm Langmuira i Freundlicha. Parametry kinetyczne określono za pomocą równań pseudopierwszego i pseudodrugiego rzędu. Obliczono również parametry termodynamiczne procesu. Izoterma Langmuira lepiej opisywała dane równowagowe. Maksymalna pojemność sorpcyjna wyznaczona eksperymentalnie wynosiła 26,95 mg · g–1 przy 25oC i pH 5,0. Model kinetyki pseudodrugiego rzędu lepiej opisywał dane doświadczalne. Ujemna wartość energii swobodnej Gibbsa (ΔG0) świadczyła o spontaniczności biosorpcji Cr(III) przez biomasę OC i jej spadku wraz ze wzrostem temperatury. Ujemna wartość entalpii (ΔH0) i entropii (ΔS0) wskazywała na egzotermiczność procesu i ograniczenie stopni swobody jonów Cr(III) na powierzchni międzyfazowej roztwór/biosorbent. Analiza FT-IR wykazała udział grup karboksylanowych w biosorpcji Cr(III) przez OC.
Źródło:
Ecological Chemistry and Engineering. A; 2016, 23, 3; 337-346
1898-6188
2084-4530
Pojawia się w:
Ecological Chemistry and Engineering. A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Applicability of different kinds of yeast biomass to lead removal from water
Możliwość wykorzystania różnych typów biomasy drożdży do usuwania ołowiu z wody
Autorzy:
Duda-Chodak, A.
Tarko, T.
Milotta, K.
Powiązania:
https://bibliotekanauki.pl/articles/1188062.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie / Polskie Towarzystwo Magnezologiczne im. Prof. Juliana Aleksandrowicza
Tematy:
lead
toxicity
biosorption
waste treatment
yeasts
waste yeast
Langmuir isotherm
Opis:
Celem pracy była ocena możliwości wykorzystania biomasy drożdżowej do usuwania ołowiu z roztworów wodnych. Materiał badawczy stanowiły: drożdże piekarskie (BY), odpadowe drożdże browarnicze (WBY) oraz drożdże paszowe (FY), stanowiące łatwo dostępny odpad produkcyjny. Ilość biomasy drożdży (BY, WBY, FY) odpowiadającą 0,1 g suchej substancji zawieszano w 100 cm3 roztworu ołowiu (stężenie 200, 500 lub 1000 mg dm—3) i przeprowadzano biosorpcję przez 20, 40, 60, 90, 120, 240 i 300 minut. Stężenie ołowiu pozostałego w roztworze mierzono metodą adsorpcyjnej spektrometrii atomowej. Wielkość ładunku ołowiu usuniętego przez biomasę drożdży wyliczano na podstawie równania równowagi masowej biosorbenta, a wyniki dopasowywano do izotermy Langmuira. Testowane drożdże usuwały z roztworu ponad 90% ołowiu w ciągu 20 min procesu. Jednakże jedynie zastosowanie BY umożliwiało obniżenie poziomu Pb poniżej 1 mg dm—3 z roztworów o wyjściowym stężeniu 200 i 500 mg Pb dm—3. Wartość qmax oraz współczynnik powinowactwa b, wyznaczone dla drożdży piekarskich po 300 min biosorpcji, wynosify odpowiednio 1250 mg Pb g—1 s.s. i 0,363. Największą wydajność usuwania Pb wykazano stosując drożdże piekarskie (BY), gdy wyjściowe stężenie ołowiu wynosiło 500 mg dm—3. Stężenie równowagowe metalu po 300 min sorpcji wynosiło 0,66 mg dm—3, co odpowiada usunięciu przez biomasę drożdży piekarskich 99,86% ołowiu z roztworu.
Źródło:
Journal of Elementology; 2012, 17, 1; 7-18
1644-2296
Pojawia się w:
Journal of Elementology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of Pb(II) and Zn(II) by Extracellular Polymeric Substance (Eps) of Rhizobium Radiobacter : Equilibrium, Kinetics and Reuse Studies
Autorzy:
Wang, L.
Yang, J.
Chen, Z.
Liu, X.
Ma, F.
Powiązania:
https://bibliotekanauki.pl/articles/204971.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
biosorption
extracellular polymeric substance
EPS
Rhizobium radiobacter
heavy metal
kinetics
Opis:
The extracellular polymeric substance (EPS) produced from Rhizobium radiobacter F2, designated as EPSF2 , was investigated as a biosorbent for the removal of Pb(II) and Zn(II) from aqueous solution. The optimum biosorption pH values were 5.0 for Pb(II) and 6.0 for Zn(II). Kinetics study revealed that the biosorption followed pseudo-first-order model well, and the equilibrium data fit the Langmuir model better. The adsorbed metal ions could be effectively desorbed by HCl. Desrobed EPSF2 regained 80% of the initial biosorption capacity after five cycles of biosorption-desorption-elution. These results demonstrated that EPSF2 could be a promising alternative for Pb(II) and Zn(II) removal from aqueous solution.
Źródło:
Archives of Environmental Protection; 2013, 39, 2; 129-140
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of adsorption isotherm models for the biosorption of chromium using cherry leaves (Muntingia calabura L.)
Autorzy:
Aathithya, R.
Sowparnika, J.R.
Balakrishnan, V.
Powiązania:
https://bibliotekanauki.pl/articles/11799.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
determination
adsorption isotherm model
biosorption
chromium
cherry
leaf
Muntingia calabura
Opis:
Contaminations of industrial metals into the river possess major threat to environment. Chromium is a heavy metal which has the wide applications in tannery and electroplating industries. Above the permitted level of Chromium(VI) into surface water leads to severe health hazards. Therefore, biosorption is a technology used for the sorption of heavy metal. In this present study adsorption isotherm models was studied for the biosorption of chromium by cherry leaves. From the adsorption isotherms it was found that the experimental data fits well with the Langmuir isotherm than the Freundlich isotherm. The monolayer capacity Qm was fond to be 11.98 mg/l and the adsorption affinity was found to be positive which indicates the efficient biosorption of chromium.
Źródło:
International Letters of Natural Sciences; 2014, 20
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of uranium(VI) from aqueous solution by rice husk
Autorzy:
Xia, L.
Li, R.
Xiao, Y.
Zheng, W.
Tan, K.
Powiązania:
https://bibliotekanauki.pl/articles/208201.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
wheat straw
biosorption
uranium
ions
biosorpcja
słoma zbożowa
uran
jony
Opis:
Basic aspects of uranium adsorption by rice husk have been investigated. The influences of various experimental parameters such as pH, time, adsorbent dosage, rice husk size, temperature and various concentrations of uranium on uptake were evaluated. The thermodynamics and kinetics of adsorption were analyzed by FT-IR and SEM. The adsorption capacity for uranium on rice husk increased upon increasing initial concentration of uranium and temperature, while decreased with the increase of the amount of rice husk. Maximum uranium adsorption was observed at pH = 3 and particle size between 120 μm and 150 μm. Adsorption equilibrium was achieved within 60 min. At 25 °C, the saturated adsorption capacity qmax was up to 15.14 mg/g when the initial concentration of uranium ranged from 10 to 400 mg/dm3. The adsorption of uranium followed Langmuir adsorption isotherm and according to quasi-second order kinetic equation. The calculated values of ΔH°, ΔS°, and ΔG° indicated that the biosorption process was endothermic and spontaneous. Based on FT-IR spectra it may be concluded that hydroxyl, carbonyl, P–O and Si=O groups are the main active sites.
Źródło:
Environment Protection Engineering; 2017, 43, 4; 41-53
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Chemiczna modyfikacja biosorbentów jako metoda zwiększania efektywności procesu biosorpcji cynku
Chemical modification of biosorbents as a method of increasing the efficiency of zinc biosorption processes
Autorzy:
Rajczykowski, K.
Sałasińska, O.
Loska, K.
Powiązania:
https://bibliotekanauki.pl/articles/126234.pdf
Data publikacji:
2016
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
biosorpcja
cynk
słoma
modyfikacja chemiczna
biosorption
zinc
straw
chemical modification
Opis:
Adsorbenty pochodzenia naturalnego, zwane biosorbentami, ze względu na niską cenę, łatwość pozyskiwania i brak właściwości toksycznych coraz powszechniej wykorzystywane są do usuwania metali ciężkich ze środowiska. W pracy analizowano możliwość chemicznego modyfikowania słomy, jako charakterystycznego dla Polski odpadu rolnego, w celu poprawy własności biosorbcyjnych, względem cynku. Stosowana w trakcie badań słoma jęczmienna była rozdrobniona do rozmiarów w zakresie 0,2-1,0 mm, a proces biosorpcji prowadzono dla wodnego roztworu cynku przy pH równym 5. Zastosowano dwie różne modyfikacje biosorbentu, tj. estryfikację przy pomocy metanolu oraz modyfikację kwasem cytrynowym w podwyższonej temperaturze. Uzyskane wyniki wskazują na wyraźną poprawę zdolności sorpcyjnych słomy poddanej modyfikacji z użyciem kwasu cytrynowego w porównaniu ze słomą niemodyfikowaną. W przypadku słomy modyfikowanej metanolem wykazano, że efektywność procesu biosorpcji cynku była nawet dwukrotnie niższa w stosunku do słomy niemodyfikowanej. Na podstawie uzyskanych wyników stwierdzono także, że usunięcie metali następowało przede wszystkim na drodze adsorpcji jonowymiennej, poprzez uwalnianie do roztworu, z powierzchni słomy, jonów wapnia i magnezu.
Biosorbents are the natural origin adsorbents, which popularity in environmental engineering is steadily increasing due to their low price, ease of acquisition and lack of the toxic properties. Presented research aimed to analyse the possibility of chemical modification of the straw, which is a characteristic waste in the Polish agriculture, to improve its biosorption properties in respect to removal of selected metals from aqua solutions. Biosorbents used during the tests was a barley straw, that was shredded to a size in the range of 0.2-1.0 mm. The biosorption process was performed for aqueous solutions of zinc at a pH 5. Two different modifications of straw was analysed: esterification with methanol and modification using the citric acid at elevated temperature. The results, obtained during the research show a clear improvement in sorption capacity of the straw modified by the citric acid. In the case of straw modified with methanol it has been shown that the effectiveness of zinc biosorption process was even a twice lower with respect to the unmodified straw. Moreover it was concluded, that the removal of analysed metals was based mainly on the ion-exchange adsorption mechanism by releasing a calcium and magnesium ions from the straw surface to the solution.
Źródło:
Proceedings of ECOpole; 2016, 10, 1; 281-288
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mikrobiologiczne usuwanie metali ciężkich ze ścieków
Microbial removal of heavy metals from wastewater
Autorzy:
Koc-Jurczyk, J
Powiązania:
https://bibliotekanauki.pl/articles/401837.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
metale ciężkie
ścieki
biosorpcja
retardacja
heavy metals
wastewater
biosorption
retardation
Opis:
Uprzemysłowienie i urbanizacja doprowadziły do zwiększonego uwalniania metali ciężkich do środowiska naturalnego (gleby, jeziora, rzeki, morza, oceany, wody podziemne). Badania nad biosorpcją metali ciężkich mają na celu wyszczególnienie typów mikroorganizmów, które skutecznie je wiążą. Ma to znaczenie zarówno ze względu na retardację zużywania metali poprzez ich odzysk, jak i spowalnianie zanieczyszczania środowiska przez ich nadmierne stężenia. Najnowsze badania donoszą o możliwości zastosowania jako biosorbentów biomasy grzybów, alg morskich, odpadów i pozostałości rolniczych, drożdży, bakterii a także materiałów, w których skład wchodzi chitozan wytworzony z powłok skorupiaków. Biohydrometalurgia jest postrzegana jako nowa i „zielona” technologia usuwania metali ciężkich ze ścieków.
Industrialization and urbanization result in increase of heavy metals released into the environment (soil, lakes, rivers, seas, oceans, groundwater). Studies on biosorption of heavy metals are aimed to specify types of microorganisms which could efficiently bind metals. This approach has a very important significance for both slowing down metals exploitation by recovery, and also reduction of environmental pollution by decrease of their excessive concentration. Recent studies have reported about the capabilities of fungi, algae, yeasts, bacteria, waste and agricultural residues or materials containing chitosan derived from crustacean shells as a biosorbents. Biohydrometallurgy could be considered as a new “green” technology of heavy metals removal from wastewater.
Źródło:
Inżynieria Ekologiczna; 2013, 34; 166-172
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption lead(II) and nikel(II) from an aqueous solution by bacterial biomass
Autorzy:
Wierzba, S.
Latała, A.
Powiązania:
https://bibliotekanauki.pl/articles/779193.pdf
Data publikacji:
2010
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
biosorpcja
ołów
nikiel
Pseudomonas fluorescens
Bacillus pumilus
biosorption
lead
nikel
Opis:
The optimum conditions for biosorption of Pb(II) and Ni(II) from aqueous solution were investigated, by using living and nonliving Pseudomonas fluorescens and Bacillus pumilus isolated from wastewater treatment plant. It was found that the optimum pH for Pb(II) removal by living and nonliving cells was 6.0, while 7.0 for Ni(II) removal. At the optimal conditions, metal ion biosorption was increased as the initial metal concentration increased. The binding capacity by living cells is significantly higher than that of nonliving cells at tested conditions. The maximum biosorption capacities for lead and nickel by using Ps. fluo-rescens and B. pumilus were 77.6, 91.4 and 65.1, 73.9 mg/g, respectively. The results of bio-sorption time and desorption experiments suggested that Pb(II) and Ni(II) uptake by the living bacterial biomass might be enhanced by intracellular accumulation.
Źródło:
Polish Journal of Chemical Technology; 2010, 12, 3; 72-78
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ procesów ozonowania i biosorpcji na obniżenie i stabilizację zapotrzebowania wody na dwutlenek chloru
Effect of Ozonation and Biosorption on the Decrease and Stabilization of Chlorine Dioxide Demand in Water Treatment
Autorzy:
Biłozor, S.
Dąbrowska, A.
Ilecki, W.
Raczyk-Stanisławiak, U.
Świetlik, J.
Nawrocki, J.
Powiązania:
https://bibliotekanauki.pl/articles/236380.pdf
Data publikacji:
2003
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
biosorpcja
ozonowanie
zapotrzebowanie na dwutlenek chloru
biosorption
ozonation
chlorine dioxide demand
Opis:
W pracy omówiono przyczyny wysokiego i zmiennego zapotrzebowania wody na dwutlenek chloru i związane z tym niebezpieczeństwo nieskutecznej dezynfekcji wody. Wykazano brak istotnych korelacji pomiędzy zapotrzebowaniem wody na dwutlenek chloru a parametrami charakteryzującymi substancje organiczne obecne w wodzie, takimi jak ogólny węgiel organiczny, absorbancja właściwa (SUVA), czy zapotrzebowanie na ozon. W badaniach stwierdzono, ze ozonowanie wody i następująca po nim filtracja przez biologicznie aktywne złoża węgla aktywnego zapewniają skuteczne obniżenie i stabilizację zapotrzebowania wody na dwutlenek chloru. Zwrócono uwagę na fakt, iż niedostosowanie dawki dwutlenku chloru do wartości zapotrzebowania może nieść z sobą niebezpieczeństwo wtórnego rozwoju bakterii w sieci wodociągowej, tym bardziej, iż w reakcji dwutlenku chloru z substancjami organicznymi powstają łatwo biodegradowalne produkty uboczne.
The paper specifies the contributors to the high and variable chlorine dioxide demand and points out the concomitant risk that the final extent of disinfection will be insufficient. The study has revealed a lack of correlation between chlorine dioxide demand and total organic carbon, SUVA and ozone. Ozonation followed by biofiltration through active carbon filters provides not only a decrease but also a stabilization of the chlorine dioxide demand.
Źródło:
Ochrona Środowiska; 2003, R. 25, nr 3, 3; 41-44
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka biosorbentu Trichoderma viride w procesie biosorpcji jonów Fe (III) z roztworu wodnego
Characteristics of biosorbent Trichoderma viride in Fe (III) biosorption process from water solution
Autorzy:
Szmyt, A.
Nastaj, J.
Powiązania:
https://bibliotekanauki.pl/articles/2071108.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
biosorpcja żelaza
FTIR
Trichoderma viride
roztwór wodny
iron biosorption
water solution
Opis:
Wykonano analizę widm FTIR (Fourier Transform Infrared Spectroscopy) złoża biosorbentu stosowanego w procesie biosorpcyjnego usuwania jonów żelaza z roztworu wodnego. Zastosowano złoże szczepu grzyba pleśniowego Trichoderma viride. Widma podczerwieni wykonano zarówno dla wodorowej jak i sodowej formy grzyba pleśniowego. Dodatkowo przeanalizowano zmiany struktury powierzchni grzyba pleśniowego po procesie biosorpcji żelaza z roztworów wodnych.
The FTIR analysis (Fourier Transform Infrared Spectroscopy) of biosorbent bed used for iron removal from water solution in biosorption process was performed. Fungus Trichoderma viride was used as the biosorption bed. Infrared spectra for both hydrogen and sodium form are presented and analyzed. Additionally, a change of fungus surface structure after biosorption is described.
Źródło:
Inżynieria i Aparatura Chemiczna; 2010, 4; 78-79
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Purification of wastewater by natural flocculants
Autorzy:
Czemierska, M.
Szczes, A.
Jarosz-Wilkolazka, A.
Powiązania:
https://bibliotekanauki.pl/articles/80232.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bioflocculant
biosorption
waste water purification
aggregation
flocculation
molecular weight
environment pollution
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2015, 96, 4
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena biologicznej aktywności filtrów węglowych w uzdatnianiu wód powierzchniowych na przykładzie wodociągu "Sulejów-Łódź"
Evaluating the Biological Activity of Carbon Filters in Surface Water Treatment: A Case Study
Autorzy:
Wolborska, A.
Zarzycki, R.
Cyran, J.
Grabowska, H.
Wybór, M.
Powiązania:
https://bibliotekanauki.pl/articles/236620.pdf
Data publikacji:
2003
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
węgiel aktywny
uzdatnianie wody
sorpcja
biosorpcja
activated carbons
water treatment
sorption
biosorption
Opis:
W pracy przedstawiono wyniki 10-miesięcznych badań pilotowych na złożu granulowanego węgla aktywnego TL 830, prowadzonych w stacji uzdatniania wody w Kalinku (Wodociąg "Sulejów-Łódź"). Równolegle z badaniami jakości wody (utlenialność, absorbancja w UV, rozpuszczony węgiel organiczny, ubytku tlenu rozpuszczonego w wodzie) przeprowadzono kontrolę stopnia wyczerpania węgla przez oznaczenie liczby jodowej. Określono kryteria biologicznego wpracowania węgla aktywnego oraz wyznaczono zapotrzebowanie wody na dwutlenek chloru. Aktywność biomasy oceniono przy pomocy testu EMS, zaś zmiany chłonności węgla aktywnego-liczbą jodową. Filtracja wody przez aktywnie biologicznie złoże węglowe okazała się skuteczną metodą usuwania zanieczyszczeń organicznych, dzięki czemu uzyskano wymaganą jakość wody uzdatnionej oraz 2¸3-krotne zmniejszenie zapotrzebowania wody na dwutlenek chloru, a także ograniczenie powstawania ubocznych produktów dezynfekcji. Jednocześnie stwierdzono efekt bioregeneracji złoża węgla aktywnego.
A 10-month pilot-plant-scale experimental study of TL 830 type granular activated carbon (GAC) was carried out at the water treatment station of the Waterworks of Kalinko (Sulejów-Łódź Water Supply System). The study included analyses of water quality parameters (COD, UV absorbance, dissolved organic carbon, oxygen loss), estimation of GAC exhaustion (by the iodine number method), continuous measurements of the hydraulic parameters of the GAC bed, physicochemical, hydrobiological and bacteriological analyses, as well as the determination of the chlorine dioxide demand for the inflowing and outflowing water. The objective of the study was to determine and compare the biological activity of the TL 820 GAC filter bed and its performance in the biosorption process. The activity of the biomass and the absorbing of the GAC were estimated by the EMS test and ion number, respectively. Water filtration through the biosorption bed was found to be an efficient method of organic matter removal, yielding water of the desired quality. The demand for chlorine dioxide decreased two- and three-fold, the formation of unwanted side products was reduced, and a bioregeneration of the GAC bed was observed.
Źródło:
Ochrona Środowiska; 2003, R. 25, nr 4, 4; 27-32
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena skuteczności oczyszczania wody na węglu aktywnym w ZPW "Goczałkowice"
Assessing the Efficiency of Water Treatment Involving Active Carbon in the Water Treatment Plant Goczałkowice
Autorzy:
Zimoch, I.
Szostak, A.
Powiązania:
https://bibliotekanauki.pl/articles/237510.pdf
Data publikacji:
2005
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
oczyszczanie wody
sorpcja
biosorpcja
węgiel aktywny
water treatment
sorption
biosorption
active carbon
Opis:
Zakład wodociągowy "Goczałkowice" jest jednym z największych zakładów systemu produkcji wody Górnośląskiego Przedsiębiorstwa Wodociągów w Katowicach, dostarczającego wysokiej jakości wodę dla ludności Śląska. Nieuregulowana gospodarka ściekowa w dorzeczu górnej Wisły, jak również wzrost wymagań stawianych wodzie przeznaczonej do spożycia, spowodował podjęcie na początku lat 90. XX w. działań mających na celu udoskonalenie dotychczasowej technologii oczyszczania wody. W pracy przedstawiono uruchomiony w styczniu 2004 r. ciąg technologiczny oczyszczania wody, obejmujący ozonowanie wstępne, koagulację, filtrację na złożach piaskowych, ozonowanie końcowe, filtrację na złożach węglowych oraz dezynfekcję. W oparciu o 16-miesięczne badania jakości wody dopływającej i odpływającej z układu (mętność, utlenialność, absorbancja w UV, OWO, tlen rozpuszczony, wskaźniki bakteriologiczne) dokonano oceny biologicznej aktywności filtrów węglowych. Ponadto przeprowadzono analizę efektów nowych wdrożeń technologicznych w aspekcie poprawy jakości wyprodukowanej wody.
The water treatment plant Goczałkowice is amongst the largest water producing plants of the Upper Silesian Piping Company Katowice, which supplies high quality water to the population. The unreasonable management of natural water resources in the upper river basin of the Vistula, as well as the ever growing demands made on drinking water quality, triggered a number of initiatives in the early 1990s, which aimed at upgrading the efficiency of the treatment train applied. The proposed water treatment train (implemented in January 2004) consisted of pre-ozonation, coagulation, sand filtration and ozonation followed by filtration on active carbon beds and disinfection. After 16-month monitoring of the water quality parameters (turbidity, COD, UV absorbance, TOC, dissolved oxygen, bacterial counts) of the influent and effluent stream, the biological activity of the carbon beds was assessed. The effect of the implemented treatment train on the quality of the water produced was analyzed.
Źródło:
Ochrona Środowiska; 2005, R. 27, nr 3, 3; 17-20
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selective biosorption of heavy metals by algae
Autorzy:
Wilke, A.
Buchholz, R.
Bunke, G.
Powiązania:
https://bibliotekanauki.pl/articles/363090.pdf
Data publikacji:
2006
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
metale ciężkie
biosorpcja
algi
ścieki
immobilizacja
heavy metals
biosorption
algae
wastewaters
immobilization
Opis:
Thirty strains of algae were examined for their biosorption abilities for the uptake of cadmium, lead, nickel and zinc from aqueous solutions. A wide range of adsorption capacities was observed between the different strains of algae and between the four metals. The cyanophyceae Lyngbya taylorii exhibited high uptake capacities for the four metals. It was confirmed by using instrumental analysis including EDX that the resulting capsules of the immobilization process are pervious to the lead. In simultaneous sorption processes of the four metals lead, cadmium, zinc and nickel, the following order of selective sorption was observed: Pb > Ni > Cd > Zn. In contrast to a commercial ion-exchange material, the alkaline metal ions Na, Ca, K, and Mg showed only a small competitive effect on the adsorption abilities of the immobilized L. taylorii.
Źródło:
Environmental Biotechnology; 2006, 2, 2; 47-56
1734-4964
Pojawia się w:
Environmental Biotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorbenty stosowane w usuwaniu jonów metali ciężkich z zanieczyszczonego
Biosorbents for heavy metal-contaminated environment
Autorzy:
Zabochnicka-Świątek, M.
Powiązania:
https://bibliotekanauki.pl/articles/1208156.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
biosorbent
biosorpcja
bioakumulacja
jony metali ciężkich
biosorbents
biosorption
bioaccumulation
heavy metal ions
Opis:
Omówiono możliwości wykorzystania wybranych biosorbentów do usuwania jonów metali ciężkich z zanieczyszczonego środowiska. Zaprezentowano najważniejsze biologiczne materiały stosowane w procesach biosorpcji i bioakumulacji oraz sposoby ich modyfikacji. Dokonano przeglądu możliwości praktycznego zastosowania wybranych biosorbentów.
The application of selected biosorbents for heavy metal-contaminated environment was discussed. The most important biological materials for biosorption and bioaccumulation processes and modification methods of biomass were presented. Practical application of selected biosorbents was discussed.
Źródło:
Chemik; 2013, 67, 10; 971-978
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of zinc, cadmium and nickel from mining waste leachate using walnut shells
Autorzy:
Ayala, Julia
Fernandez, Begona
Powiązania:
https://bibliotekanauki.pl/articles/208277.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
metal ions
adsorption
biosorption
adsorbent
kinetics
copper
jony metali
adsorpcja
biosorpcja
kinetyka
miedź
Opis:
The removal of heavy metals from aqueous solutions using walnut shells was investigated. The effects of pH, contact time, initial metal concentration, adsorbent concentration, and co-ions were studied in synthetic solutions. Metal uptake was found to be dependent on the initial pH of the solution; the removal rate increased upon increasing pH, showing the highest affinity at pH 5–7. The amount of metal removed improved with increasing initial concentration. Increasing adsorbent dosage enhanced removal efficiency, but reduced the amount absorbed per unit mass of walnut shells. The presence of co-ions suppressed the uptake of heavy metals, divalent ions having a more negative effect than monovalentions. The adsorption of Zn, Cd and Ni onto walnut shells was found to fit Langmuir and Freundlich isotherms. The results obtained in the tests with mining waste leachate showed the potential use of walnut shells for the removal of heavy metals.
Źródło:
Environment Protection Engineering; 2019, 45, 2; 141-158
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie kiszonki z kukurydzy Zea Mays L. do usuwania barwników z roztworów wodnych
Application of Maize Silage as a Biosorbent for the Removal of Dyes from Aqueous Solutions
Autorzy:
Filipkowska, U.
Jóźwiak, T.
Rodziewicz, J.
Kuciejewska, J.
Powiązania:
https://bibliotekanauki.pl/articles/1819174.pdf
Data publikacji:
2013
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
roztwory wodne
usuwanie barwników
ow-cost adsorbent
adsorption
biosorption
chitosan
sawdust
biomass
chitin
waste
Opis:
The aim of this study was to determine the effectiveness of synthetic dyes removal from aqueous solutions with the use of silage from common maize Zea mays L. as a biosorbent. Two dyes were used as adsorbates: cationic Basic Violet 10 (BV10) and anionic Reactive Black 5 (RB5). The silage from common maize Zea mays L. originated from the Department of Agrotechnology and Plant Production Management, University of Warmia and Mazury in Olsztyn. Before experiments, the silage was dried at a temp. of 60°C for 12 h and then sieved through a sieve with mesh diameter of 0.25 mm. The scope of analyses included determinations of: the effect of biosorbent dose on the course of adsorption process, optimal time of dyes adsorption, and correlation between type of dye and effectiveness of the adsorption process. The effectiveness of RB5 and BV10 adsorption from aqueous solutions onto silage was analyzed based on a correlation between the quantity of adsorbed dye Q (mg/g d.m.), and its equilibrium concentration C (mg/dm3). Results obtained were analyzed with the use of four sorption isotherms: Freundlich, Langmuir, double Langmuir, and Redlich-Peterson. Poorer fit of experimental results to the model was achieved only in the case of Freundlich isotherm. The remaining three models were very well describing the results. Owing to the presence of negative functional groups like e.g. –COOH and –OH in silage, it has a negative charge in aqueous solutions. This has a beneficial impact on the effectiveness of sorption of positively-charged cationic dyes. In turn, electrostatic repulsion of a negatively-charged surface of a biosorbent and anionic dyes exerts a negative effect on sorption effectiveness. The maximum sorption capacity of silage determined for the cationic dye BV10 was ca. 180 mg/g d.m. and was significantly higher than the sorption capacity assayed for the anionic dye RB5 - ca. 80 mg/g d.m. In comparing the achieved results for the sorption of the analyzed dyes RB5 and BV10 onto maize silage with the effectiveness of dyes sorption on other biosorbents, it may be concluded that the waste maize silage displays very good sorption properties and may be successively applied for dye removal.
Źródło:
Rocznik Ochrona Środowiska; 2013, Tom 15, cz. 3; 2324-2338
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of reactive dye from aqueous solutions using banana peel and sugarcane bagasse as biosorbents
Autorzy:
Ahmed, Arif Eftekhar
Majewska-Nowak, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/2032951.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
reactive dye
biosorption
Eurozol Navy Blue
ENB
banana peel
barwnik reaktywny
biosorpcja
skórka banana
Opis:
The adsorption of Eurozol Navy Blue (ENB) reactive dye was examined using banana peel and sugarcane bagasse powders. Several parameters such as pH, contact time, agitation speed, temperature, initial dye concentration, and adsorbent dosage were considered and their impact on dye adsorption efficiency was evaluated. The removal percentages of ENB dye due to adsorption on banana peel and sugarcane bagasse were 72% and 70%, respectively. Simultaneous dosing of both biosorbents resulted in 68% dye removal. The Langmuir isotherm model was found to fit the adsorption of ENB dye on banana peel and sugarcane bagasse powders. The corresponding maximum adsorption capacities were equal to 24.09, 32.46, and 27.54 mg/g for banana peel powder, sugarcane bagasse powder, and the mixture of adsorbents, respectively.
Źródło:
Environment Protection Engineering; 2020, 46, 3; 121-135
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of Cu(II) by live and dead cells of Yarrowia lipolytica
Biosorpcja Cu(II) przez żywe i martwe komórki Yarrowia lipolytica
Autorzy:
Wierzba, S.
Powiązania:
https://bibliotekanauki.pl/articles/127390.pdf
Data publikacji:
2014
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
biosorption
copper
Yarrowia lipolytica
live cells
dead cells
biosorpcja
miedź
żywe i martwe komórki
Opis:
The biosorption characteristic of Cu(II) using live and dead cells of Yarrowia lipolytica as biosorbents have been investigated in the present research. Biosorption of Cu(II) was enhanced with an increase in pH, temperature, agitation, contact time and initial concentration of the metal ion. It was observed that dead and live biomass efficiently removed copper at 30 min at an initial pH of 5.0. Temperature of 35ºC was optimum at agitation speed of 150 or 200 rpm. For initial copper concentrations of 1-200 mg · dm–3, the adsorption data provide an excellent fit to the Langmuir isotherm. Experimental maximum biosorption capacity turned out to be 12.56 mg · g–1 for living material and 14.31 mg · g–1 for dead sorbents, respectively.
Przedstawiono charakterystykę biosorpcji Cu(II) przy użyciu żywych i martwych komórek Yarrowia lipolytica jako biosorbentu. Biosorpcja Cu(II) zwiększała się wraz ze wzrostem pH, temperatury, szybkości mieszania, czasu kontaktu i początkowego stężenia jonu metalu. W pracy zaobserwowano, że żywa i martwa biomasa skutecznie usuwa miedź w ciągu 30 minut przy początkowym pH 5,0. Temperatura 35ºC była optymalna przy szybkości mieszania wynoszącej 150-200 rpm. Dla początkowego stężenia miedzi z zakresu 1-200 mg · dm–3 uzyskane dane biosorpcji były doskonale dopasowane do modelu Langmuira. Uzyskane w trakcie doświadczeń maksimum biosorpcji dla żywego i martwego sorbentu wynosiło odpowiednio 12,56 i 14,31 mg · g–1.
Źródło:
Proceedings of ECOpole; 2014, 8, 1; 103-108
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of Cu(II) and Pb(II) from aqueous solutions by lactic acid bacteria
Usuwanie Cu(II) I Pb(II) z roztworów wodnych przez bakterie kwasu mlekowego
Autorzy:
Wierzba, S.
Powiązania:
https://bibliotekanauki.pl/articles/127425.pdf
Data publikacji:
2015
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
biosorption
Cu(II)
Pb(II)
isotherm
lactic acid bacteria
biosorpcja
izoterma
bakterie kwasu mlekowego
Opis:
The aim of the study was to compare the removal of Cu(II) and Pb(II) from aqueous solution by lactic acid bacteria (LAB). Effect of various process parameters, viz., initial metal ions concentration, pH, and contact time has been studied for the removal of copper and lead ions. Langmuir and Freundlich models were applied to describe the biosorption isotherm of the metal ions by LAB biomass. Langmuir model fitted the equilibrium data better than the Freundlich isotherm. The sorbent showed the maximum sorptive capacity amounting to be 11.07 and 10.51 mg · g–1 for Cu(II) and Pb(II) ions, respectively. The optimum conditions were pH 6.0 with equilibrium time of 40 min for both metal ions. The involvement of functional groups on the surface of dried biomass in biosorption process is also discussed.
Celem pracy było porównanie zdolności usuwania Cu(II) i Pb(II) z roztworu wodnego przez bakterie kwasu mlekowego (LAB). Badano wpływ różnych parametrów, tj. stężenia jonów metali, pH i czas kontaktu, na proces usuwania jonów miedzi i ołowiu. Do opisu izoterm adsorpcji jonów metali przez biomasę LAB zastosowano modele Langmuira i Freundlicha. Uzyskane dane doświadczalne były lepiej dopasowane do modelu Langmuira niż Freundlicha. Sorbent wykazał maksymalną zdolność sorpcyjną, wynoszącą 11,07 i 10.51 mg · g–1 odpowiednio dla jonów Cu(II) i Pb(II). Optymalne warunki biosorpcji obu jonów metali wynosiły: pH 6,0 i czas równowagi 40 minut. Omówiono również udział grup funkcyjnych na powierzchni biomasy w procesie biosorpcji.
Źródło:
Proceedings of ECOpole; 2015, 9, 2; 505-512
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of Heavy Metal Sorption by Potato Tubers
Badanie sorpcji metali ciężkich przez bulwy ziemniaczane
Autorzy:
Setlak, M.
Rożnowski, J.
Szymońska, J.
Powiązania:
https://bibliotekanauki.pl/articles/388686.pdf
Data publikacji:
2009
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
biosorpcja z roztworów
metale ciężkie
sorbenty ziemniaczane
biosorption from solutions
heavy metals
potato sorbents
Opis:
In the paper a potential application of potato tubers for the removal of heavy metals from aqueous solutions was investigated. Sorption of Cu2+, Fe5+ and Pb2+ was studied for different salts in order to determine the influence of counter anions on the cation uptake by the investigated adsorbents. Potatoes in the form of raw and dried potato cubes and the peels were soaked in 5 % aqueous solution of the following salts: copper(II) acetate, chloride and sulfate, iron(III) chloride and nitrate(V) and lead(II) acetate and nitrate(V). After sample wet mineralization with HNO3 and HClO4, the total metal content was determined by the inductively coupled plasma atomic emission spectroscopy (ICP-AES). The inner structure of the applied sorbents was determined by using the scanning electron microscopy (SEM). Sorption was found to be dependent on both the cation and the anion present in the solution. Acetate ions significantly enhanced the metal uptake from the solution. In all studied samples the uptake of Pb2+ was most effective in comparison with that for the other cations. Among the sorbents, the potato peels have taken higher, than it was obtained for the others, amount of metals, and the raw potato cubes were more effective compared with the dried ones. The metal uptake was positively correlated to the moisture and protein content as well as the amount of Ca2+ and K+ ions in the initial samples. It was also related to the inner structure of used potato materials. The obtained results should be useful in the recovery of the heavy metals from the environmental samples.
W pracy badano sorpcję metali ciężkich przez bulwy ziemniaczane oraz wpływ różnych anionów na wydajność tego procesu. Badano sorpcję Cu2+, Fe3' i Pb2+ z 5 % roztworów wodnych soli, takich jak octan, chlorek i siarczan(VI) miedzi(II), chlorek i azotan(V) żelaza(III) oraz octan i azotan(V) ołowiu(II). W roli sorbentów użyto surowe i suszone ziemniaki w postaci kostki oraz skórki ziemniaczane. Całkowitą zawartość metali w próbkach, po ich mineralizacji przy użyciu HNO3 i HClCu, oznaczono metodą ICP-AES. Wewnętrzną strukturę zastosowanych sorbentów określono przy użyciu skaningowej mikroskopii elektronowej (SEM). Stwierdzono, że wydajność sorpcji zależy zarówno od rodzaju kationów, jak i od anionów obecn w roztworze. Obecność jonów octanowych znacznie zwiększała pobieranie kationów z roztworu. Najwiekszą wydajność procesu, bez względu na zastosowany sorbent zaobserwowano dla jonów Pb2+. Wśród sorbentów skórki ziemniaczane okazały się najbardziej efektywnym materiałem wiążącym badane kationy metali ciężkich, a najmniejszą wydajność uzyskano dla suszonej kostki ziemniaczanej. Zauważono pozytywną' korelację pomiędzy ilością kationów metali związaną z danym sorbentem a jego wilgotnością, zawartością białka oraz ilością jonów Ca2+ i K+. Ponadto, struktura wewnętrzna sorbentów była również czynnikiem wpływającym na efektywność procesu. Uzyskane wyniki wskazują, że bulwy ziemniaczane, a zwłaszcza skórki ziemniaczane mogą być przydatne jako biosorbenty do odzyskiwania metali ciężkich z próbek środowiskowych.
Źródło:
Ecological Chemistry and Engineering. A; 2009, 16, 5/6; 653-660
1898-6188
2084-4530
Pojawia się w:
Ecological Chemistry and Engineering. A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of copper(II) by live and dead cells of Yarrowia lipolytica
Biosorpcja miedzi(II) przez żywe i martwe komórki Yarrowia lipolytica
Autorzy:
Wierzba, S.
Powiązania:
https://bibliotekanauki.pl/articles/389084.pdf
Data publikacji:
2013
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
biosorption
copper
Yarrowia lipolytica
live cells
dead cells
biosorpcja
miedź
żywe komórki
martwe komórki
Opis:
The biosorption characteristic of Cu(II) using live and dead cells of Yarrowia lipolytica as biosorbents have been investigated in the present research. Biosorption of Cu(II) was enhanced with an increase in pH, temperature, agitation, contact time and initial concentration of the metal ion. It was observed that dead and live biomass efficiently removed copper at 30 min at an initial pH of 5.0. Temperature of 35 oC was optimum at agitation speed of 150 or 200 rpm. For initial copper concentrations of 1–200 mg/dm3, the adsorption data provide an excellent fit to the Langmuir isotherm. The maximum metal uptake values (qmax, mg/g) were found as 9.82 and 12.03 for live and dead biomass, respectively.
W pracy przedstawiono charakterystykę biosorpcji Cu(II) przy użyciu żywych i martwych komórek Yarrowia lipolytica jako biosorbentu. Biosorpcja Cu(II) zwiększała się wraz ze wzrostem pH, temperatury, szybkości mieszania, czasu kontaktu i początkowego stężenia jonu metalu. W pracy zaobserwowano, że żywa i martwa biomasa skutecznie usuwa miedź w ciągu 30 minut, przy początkowym pH 5,0. Temperatura 35 oC była optymalna przy szybkości mieszania wynoszącej 150–200 rpm. Dla początkowego stężenia miedzi z zakresu 1–200 mg/g uzyskane dane biosorpcji były doskonale dopasowane do modelu Langmuira. Maksymalne wartości sorpcji (qmax, mg/g) dla żywej i martwej biomasy wynosiły odpowiednio 9,82 i 12.03.
Źródło:
Ecological Chemistry and Engineering. A; 2013, 20, 7-8; 875-883
1898-6188
2084-4530
Pojawia się w:
Ecological Chemistry and Engineering. A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ CaCl2 na sorpcję metali ciężkich w biomasie
The influence of CaCl2 on heavy metals sorption in biomass
Autorzy:
Kłos, A.
Rajfur, M.
Dołhańczuk-Śródka, A.
Krems, P.
Jerz, D.
Powiązania:
https://bibliotekanauki.pl/articles/297346.pdf
Data publikacji:
2015
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
biosorpcja
wymiana jonowa
metale ciężkie
remediacja wód
biosorption
heavy metals
ion exchange
water remediation
Opis:
Zbadano w warunkach laboratoryjnych wpływ chlorku wapnia na sorpcję wybranych kationów metali ciężkich: Cu2+, Zn2+ i Cd2+ w biomasie porostów Hypogymnia physodes, mchów Pleurozium schreberi, glonów słodkowodnych Spirogyra sp., glonów morskich Palmaria palmata oraz makrofitów Elodea canadensis L. Wykazano różne właściwości sorpcyjne biomasy, powodujące m.in. zmiany pH roztworów podczas procesu sorpcji. Wskazano na zmiany wydajności oraz preferencji sorpcyjnych pod wpływem wprowadzanych do roztworu kationów Ca2+, ale także anionów Cl‾, które przesuwają stan równowagi w kierunku tworzenia form jonowych, niebiorących udziału w procesie wymiany jonowej. Interesującym, niewyjaśnionym efektem jest brak wpływu stężenia chlorku wapnia, w zakresie od 0 do 100 mmol/dm3, na sorpcję miedzi, ale tylko w badanych glonach oraz makrofitach.
The influence of calcium chloride on sorption of the selected heavy metal cations: Cu2+, Zn2+ and Cd2+ in the biomass of lichens Hypogymnia physodes, mosses Pleurozium schreberi, fresh water alga Spirogyra sp., sea alga Palmaria palmata and macrophyte Elodea Canadensis L. was tested under laboratory conditions. Various biomass sorption characteristics were determined, which cause, among others, the change of the pH of the solutions during the sorption process. Changes of efficiency and sorption preferences were identified, under the influence of Ca2+ cations and also Cl‾ anions, introduced to the solution, which shift the equilibrium towards creation of the ion forms, which do not participate in the process of ions exchange. The lack of the influence of calcium chloride concentration, within the range from 0 to 100 mmol/ dm3, on the sorption of copper is an interesting, unexplained effect, however, only in the tested alga and macrophyte.
Źródło:
Inżynieria i Ochrona Środowiska; 2015, 18, 2; 169-178
1505-3695
2391-7253
Pojawia się w:
Inżynieria i Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of Pb (II) from aqueous solutions by modified of two kinds of marine algae, Sargassum glaucescens and Gracilaria corticata
Autorzy:
Esmaeli, A.
Kalantari, M.
Saremnia, B.
Powiązania:
https://bibliotekanauki.pl/articles/779711.pdf
Data publikacji:
2012
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
biosorpcja ołowiu
usuwanie Pb(II)
Gracilaria corticata
Sargassum glaucescens
biosorption. Lead (II)
removal
iIsotherm mode
Opis:
In this research, the batch removal of Pb2+ ions from wastewater and aqueous solution with the use o two different modified algae Gracilaria corticata (red algae) and Sargassum glaucescens (brown algae) was examined. The experiment was performed in a batch system and the effect of the pH solution; initial concentration and contact time on biosorption by both biomasses were investigated and compared. When we used S. glaucescens as a biosorbent, the optima conditions of pH, Pb2+ concentration and equilibrium time were at 5, 200 mg/L and 70 min, in the range of 95.6% removal. When G. corticata was used for this process, pH 3, 15 mg/L pb2+ concentration and 50 min contact time, resulted in the maximum removal (86.4%). The equilibrium adsorption data are fitted to the Frundlich and Langmuir isotherm model, by S. glaucescens and G. corticata, respectively. The pb2+ uptake by both biosorbent was best described by the second-order rate model.
Źródło:
Polish Journal of Chemical Technology; 2012, 14, 2; 22-28
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of Heavy Metals with the Use of Mixed Algal Population
Biosorpcja metali ciężkich z udziałem mieszanej populacji glonów
Autorzy:
Kipigroch, K.
Janosz-Rajczyk, M.
Wykrota, L.
Powiązania:
https://bibliotekanauki.pl/articles/204943.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
biosorpcja
glony
metale ciężkie
cynk
nikiel
wytrącanie metali
biosorption
algae
heavy metal
zinc
nickel
metal precipitation
Opis:
This work presents the results of a study whose aim was to determine the influence of algal blooms on precipitation of heavy metals. The scope of the study covered culture of a mixed population made up of Scenedesmus and Pseudokirchneriella algae in experimental conditions and initiating a metal biosorption process with the use of culture biomass by administering ions of Zn(II) and Ni(II). The process was controlled by assessing the level of biosorption of metals entered at a one-off basis in the form of Zn(II) and Ni(II) salts or in the form of mixture of both ions, in comparison to the control sample, at different exposure times (2 hours and 24 hours). The presence of metals was determined both in the biomass and in the culture medium. The presented results of the study confirm the effectiveness of Chlorophyta in the process of zinc and nickel biosorption. A phenomenon of competitiveness between the metals was observed when they were administered at the same time.
Niniejsza praca prezentuje wyniki badań, których celem było określenie wpływu zakwitów glonowych na wytrącanie metali ciężkich. Zakres badań obejmował hodowlę mieszanej populacji złożonej z rodzajów Scenedesmus i Pseudokirchneriella w warunkach eksperymentalnych, a następnie zainicjowanie procesu biosorpcji metali przy udziale hodowlanej biomasy, poprzez dawkowanie jonów Zn(II) i Ni(II). Kontrola procesu polegała na dokonaniu oceny stopnia biosorpcji metali, wprowadzonych jednorazowo w postaci soli Zn(II) lub Ni(II) lub w postaci mieszaniny obu jonów, w porównaniu do próbki kontrolnej przy różnym czasie ekspozycji (2 oraz 24 godziny). Oznaczeniom na obecność metali poddano zarówno biomasę, jak i podłoże hodowlane. Przedstawione wyniki badań potwierdzają skuteczność zielenic w procesie biosorpcji cynku oraz niklu. Zaobserwowano zjawisko konkurencyjności pomiędzy metalami, gdy były dawkowane jednocześnie.
Źródło:
Archives of Environmental Protection; 2012, 38, 2; 3-10
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Śruta sojowa wzbogacona w jony miedzi w procesie biosorpcji – nowy produkt dla zwierząt
Soybean meal enriched with Cu(II) by biosorption – a new product for animals
Autorzy:
Witkowska, Z.
Chojnacka, K.
Samoraj, M.
Tuhy, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/1216338.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Przemysłu Chemicznego. Zakład Wydawniczy CHEMPRESS-SITPChem
Tematy:
biosorpcja
dodatki paszowe
reaktor kolumnowy
mikroelementy
śruta sojowa
biosorption
feed additives
fixed-bed reactor
microelements
soybean meal
Opis:
Wytworzono nowe biologiczne dodatki paszowe z miedzią metodą biosorpcji. Proces prowadzono w trybie ciągłym wykorzystując reaktor kolumnowy ze złożem o pojemności 2,5 dm3. Wypełnienie kolumny stanowiło złoże śruty sojowej, które wzbogacano podając od góry do kolumny roztwór jonów Cu(II) o stężeniu 300 mg/dm3. Proces prowadzono przez 6 godzin. Kinetykę procesu adsorpcji opisano za pomocą modelu kinetycznego Yoon i Nelsona. Analiza próbek wykazała, że po pierwszej i drugiej godzinie stopień związania jonów z roztworu przez biomasę wynosił odpowiednio 97,3% oraz 85,9%. Po kolejnych godzinach prowadzenia procesu stopień wiązania jonów był znacznie mniejszy i wynosił odpowiednio 53,4%, 33,2%, 20,9% oraz 14,3% po trzeciej, czwartej, piątej i szóstej godzinie.
The aim was to develop a new generation feed additive with copper using the biosorption method. The process was conducted in a fixed-bed reactor with capacity of 2.5 dm3. Soybean meal constituted the matrix for microelement ions. The bed was enriched by pouring the solution with Cu(II) ions at concentration of 300 mg/dm3 from the top of the column. The process was conducted for 6 hours. The adsorption kinetics was described using Yoon and Nelson kinetic model. The analysis showed that after the first and the second hour, the degree of ion binding was 97.3 and 85.9%, respectively. In the next hours of the process the degree of ion biding was much lower and was 53.4, 33.2, 20.9 and 14.3% after third, fourth, fifth and sixth hour, respectively.
Źródło:
Chemik; 2013, 67, 7; 642-647
0009-2886
Pojawia się w:
Chemik
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The use of activated carbons for removing organic matter from groundwater
Zastosowanie pylistych węgli aktywnych do usuwania materii organicznej z wody podziemnej
Autorzy:
Kaleta, J.
Kida, M.
Koszelnik, P.
Papciak, D.
Puszkarewicz, A.
Tchórzewska-Cieślak, B.
Powiązania:
https://bibliotekanauki.pl/articles/205458.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
groundwater
powdery activated carbon
granular activated carbon
organic matter
biosorption
woda gruntowa
pylisty węgiel aktywny
granulowany węgiel aktywny
materia organiczna
biosorpcja
Opis:
The article presents research results of the introduction of powdery activated carbon to the existing technological system of the groundwater treatment stations in a laboratory, pilot plant and technical scale. The aim of the research was to reduce the content of organic compounds found in the treated water, which create toxic organic chlorine compounds (THM) after disinfection with chlorine. Nine types of powdery active carbons were tested in laboratory scale. The top two were selected for further study. Pilot plant scale research was carried out for the filter model using CWZ-30 and Norit Sa Super carbon. Reduction of the organic matter in relation to the existing content in the treated water reached about 30%. Research in technical scale using CWZ-30 carbon showed a lesser efficiency with respect to laboratory and pilot-plant scale studies. The organic matter decreased by 15%. Since filtration is the last process before the individual disinfection, an alternative solution is proposed, i.e. the second stage of filtration with a granular activated carbon bed, operating in combined sorption and biodegradation processes. The results of tests carried out in pilot scale were fully satisfactory with the effectiveness of 70–100%.
W artykule przedstawiono wyniki badań w skali laboratoryjnej, półtechnicznej i technicznej nad wprowadzeniem do istniejącego układu technologicznego stacji uzdatniania wody podziemnej, pylistego węgla aktywnego. Celem badań było obniżenie zawartości występujących w wodzie uzdatnionej związków organicznych, które po procesie dezynfekcji chlorem tworzą toksyczne związki chloroorganiczne (THM). W skali laboratoryjnej przebadano 9 rodzajów pylistych węgli aktywnych, z których dwa najlepsze wytypowano do dalszych badań. Badania w skali półtechnicznej realizowano na filtrze modelowym z zastosowaniem węgli: CWZ-30 i Norit Sa Super. Obniżenie materii organicznej w stosunku do jej dotychczasowej zawartości w wodzie uzdatnionej wynosiło ok.30%. Badania w skali technicznej z zastosowaniem węgla CWZ-30 wykazały nieco mniejszą skuteczność w odniesieniu do badań laboratoryjnych i badań w skali półtechnicznej. Obniżenie zawartości materii organicznej wyniosło ok. 15%. Ponieważ ostatnim procesem jednostkowym przed dezynfekcją jest filtracja, zaproponowano alternatywne rozwiązanie – drugi stopień filtracji ze złożem granulowanego węgla aktywnego, pracującego w połączonych procesach sorpcji i biodegradacji. Rezultaty badań zrealizowanych w skali półtechnicznej były w pełni zadowalające – skuteczność 70–100%.
Źródło:
Archives of Environmental Protection; 2017, 43, 3; 32-41
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization and equilibrium studies of Pb(II) removal by Grewia Asiatica seed: a factorial design approach
Autorzy:
Siyal, A. N.
Memon, S. Q.
Khaskheli, M. I.
Powiązania:
https://bibliotekanauki.pl/articles/778329.pdf
Data publikacji:
2012
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
optymalizacja
usuwanie Pb(II)
odpady nasion Grewiii
metodologia powierzchni odpowiedzi
badania równowagi
biosorpcja
optimization
Pb(II) removal
Grewia seed waste
response surface methodology
factorial design
equilibrium studiem
biosorption
Opis:
This study aims to explore the efficiency of an agro waste material for the remediation of Pb(II) contaminated water. A factorial design approach is adopted to optimize removal efficiency and to study the interaction between effective variables. A face-centered Draper-Lin composite design predicted 100% removal efficiency at optimum variables; pH 8, initial concentration of Pb(II) ion 12mg/L, sorbent dose 200mg and agitation time 110 min. Regration coefficient (R2 = 99.9%) of a plot of the predicted versus the observed values and p value (>0.05) confirms the applicability of the predicted model. Langmuir and Dubinin-Radushkevich (D-R) isotherm models were applicable to sorption data with the Langmuir sorption capacity of 21.61š0.78 mg/g. The energy of sorption was found to be 13.62š0.32 kJ/mol expected for ion-exchange or chemisorption nature of sorption process. Characterization of Grewia seed suggested a possible contribution of carboxyl and hydroxyl groups in the process of biosorption. The present study shows that Grewia seeds can be used effectively for the remediation of Pb(II) contaminated water.
Źródło:
Polish Journal of Chemical Technology; 2012, 14, 1; 71-77
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwości zastosowania grzybów w technologiach oczyszczania i remediacji wybranych elementów środowiska
Possible applications of fungi in purification and environmental remediation technologies
Autorzy:
Kołwzan, B.
Adamiak, W.
Dziubek, A. M.
Powiązania:
https://bibliotekanauki.pl/articles/236820.pdf
Data publikacji:
2018
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
environment purification
wastewater
soil
gases
toxic pollution
biodegradation
bioremediation
mycoremediation
biofiltration
decolorization
white rot fungi
ligninolytic
biofilm
xenobiotics
bioaccumulation
biosorption
oczyszczanie środowiska
ścieki
gleba
gazy
zanieczyszczenia toksyczne
biodegradacja
bioremediacja
mykoremediacja
biofiltracja
odbarwianie
grzyby białej zgnilizny
biofilm
ksenobiotyki
bioakumulacja
biosorpcja
Opis:
Grzyby wykazują wiele cech przydatnych w inżynierii środowiska, dających im przewagę nad bakteriami. Udowodniono, że potrafią one rozkładać wiele skomplikowanych związków organicznych, także ksenobiotyków, takich jak trudnobiodegradowalne wielopierścieniowe związki aromatyczne, polichlorowane węglowodory, dioksyny, pestycydy oraz pozostałości materiałów wybuchowych. Ważną rolę w naturalnej regulacji liczebności populacji roślin odgrywają pasożytnicze gatunki grzybów, a gatunki symbiotyczne są niezbędne do prawidłowego rozwoju i wzrostu wielu gatunków roślin. Ich różnorodność taksonomiczna, genetyczna i funkcjonalna jest ogromna i stanowi obszerne źródło organizmów użytecznych w procesie bioremediacji. W dokonanym przeglądzie piśmiennictwa wykazano, że różne gatunki grzybów mogą znaleźć zastosowanie w remediacji środowiska gruntowo-wodnego oraz w oczyszczaniu ścieków i gazów odlotowych. Jednakże dotychczasowe badania nad wykorzystaniem grzybów najczęściej były prowadzone w skali laboratoryjnej. Eksperymenty w skali półtechnicznej i polowej wykazały, że na obecnym etapie praktyczne wykorzystanie grzybów w systemach inżynierii środowiska nie jest ekonomicznie uzasadnione. Problemem, który wymaga rozwiązania jest utrzymanie dominacji szczepów grzybów o wysokiej aktywności degradacyjnej w otwartych układach oczyszczających w warunkach konkurencji ze strony mikroorganizmów autochtonicznych. Duże nadzieje wiąże się z jednoczesnym wykorzystaniem w układach oczyszczania środowiska grzybów i bakterii, których skuteczność biodegradacyjna może się wzajemnie uzupełniać. Aby w pełni wykorzystać specyficzne walory grzybów niezbędne są badania przesiewowe w celu izolacji szczepów o szerszych zdolnościach metabolicznych, a także udoskonalanie szczepów metodami in vitro. Podobnie przyszłościowe jest wykorzystanie w bioremediacji immobilizowanych enzymów grzybowych. Rozwój technik molekularnych pozwoli na zmniejszenie nadal jeszcze wysokich kosztów wytwarzania, oczyszczenia i immobilizacji enzymów na odpowiednich nośnikach.
Fungi possess many features useful to environmental engineering, which gives them an advantage over bacteria. Their ability to decompose many complex organic compounds, including xenobiotics, such as difficult to biodegrade polycyclic aromatic compounds, polychlorinated hydrocarbons, dioxins, pesticides and explosive residues has been documented. Parasitic fungi species play an important role as natural regulators of plant population size, while symbiotic species are essential to proper development and growth of many plant species. The enormous taxonomic, genetic and functional diversity of fungi constitutes a rich source of organisms useful in bioremediation process. The literature review demonstrated that various types of fungi could be employed in remediation of soil-water environment as well as in treatment of wastewater and waste gases. However, most often current studies on fungal applications are carried out on a laboratory scale. At the current stage, as demonstrated by semi-technical and field-scale experiments, practical use of fungi in environmental engineering systems is not economically justified. Maintenance of dominance of fungal strains with high degradation activity in open purification systems in competition with indigenous microorganisms remains an open problem. Great promises are held out for simultaneous use of fungal and bacterial environments in treatment systems, as their biodegradation effectiveness may complement each other. Improvement of strains by the in vitro methods and screening tests to isolate strains with broader metabolic abilities are necessary in order to take full advantage of the specific benefits of fungi. Similarly, use of immobilized fungal enzymes in bioremediation offers good prospects for the future. Development of molecular techniques will allow for reduction of persistently high costs of enzyme production, purification and immobilization on appropriate carriers.
Źródło:
Ochrona Środowiska; 2018, 40, 1; 3-20
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-58 z 58

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies