Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Nickel" wg kryterium: Temat


Tytuł:
Exploitation of spent nickel-metal hydride (Ni-MH) batteries as a source of value-added products
Autorzy:
Farghal, Fatma E.
Abdel-Khalek, Mohamed A.
Powiązania:
https://bibliotekanauki.pl/articles/2146864.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
nickel–metal hydride
batteries
nickel
recovery
cementation
leaching
recycling
Opis:
Spent Nickel–metal hydride batteries can be sources of valuable metals such as nickel, cobalt, manganese, rare earths and toxic chemicals. The recycling of these materials is necessary from both economic and environmental points of view. In this study the nickel is leached in acid solution followed by precipitation and thermal decomposition or by cementation. The affecting parameters such as acid type and concentration, time, temperature and solid/liquid ratio were investigated. The maximum of leached nickel could be obtained in 3M sulfuric acid at 65°C for 60 min with solid-to-liquid ratio of 30 g L-1. The liquid film is a more suitable model for demonstrating the kinetics of the nickel leaching. Thermal decomposition of the precipitated nickel dimethyl-glyoxime was employed in preparation of nickel oxide. Nickel was separated from aqueous solution by cementation on zinc. The cementation process follows pseudo first-order kinetics and diffusion controlling steps. The yield was 91% of the original nickel content.
Źródło:
Physicochemical Problems of Mineral Processing; 2021, 57, 6; 95--101
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of nickel on human health
Wplyw niklu na zdrowie czlowieka
Autorzy:
Duda-Chodak, A
Blaszczyk, U.
Powiązania:
https://bibliotekanauki.pl/articles/15851.pdf
Data publikacji:
2008
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie / Polskie Towarzystwo Magnezologiczne im. Prof. Juliana Aleksandrowicza
Tematy:
human health
nickel
nickel source
nickel exposure
toxicity
carcinogenesis
occupational exposure
drinking water
food
health impact
Opis:
In 2008, nickel received the shameful name of the “Allergen of the Year.” According to dermatologists the frequency of nickel allergies is still growing, and it cannot be explained only by fashionable piercing and nickel devices used in medicine (like coronary stents). Occupational exposure of several million workers worldwide has been shown to give rise to elevated levels of nickel in blood, urine and body tissues. In these cases, workers are exposed to airborne fumes and dusts containing nickel and its compounds and therefore inhalation is the main route of uptake. Nonoccupational sources of nickel exposure for the general population include mainly drinking water and food. Recently, tests of kitchen kettles showed substantial leaching of nickel into drinking water when boiled in kettles with exposed nickel-plated elements. Three types of adverse health impacts as a result of exposure to nickel are discussed in the text. Acute health effects generally result from short-term exposure to high concentrations of pollutants. Chronic noncancer health effects may result from long-term exposure to relatively low concentrations of pollutants. Inhalation of nickel also can cause cancer of the lungs, nose and sinuses. Cancers of the throat and stomach have also been attributed to inhalation of nickel. However, the exact mechanism by which nickel causes cancer is still questionable and needs further investigation. The most popular hypotheses to explain this phenomenon are presented in the text.
W 2008 nikiel zyskał niechlubne miano „alergenu roku”. Według dermatologów, wciąż rosnąca częstość alergii na nikiel nie może być tłumaczona jedynie modą na przekłuwanie ciała lub zwiększone zastosowanie w medycynie urządzeń zawierających nikiel (np. stenty naczyń wieńcowych). Wykazano, że kilka milionów robotników na całym świecie narażonych zawodowo na nikiel i jego związki, ma podwyższony poziom tego pierwiastka we krwi, moczu i tkankach organizmu. W tych przypadkach pracownicy są wystawieni na opary i pyły zawierające nikiel, a zatem głównym sposobem pobierania tego pierwiastka jest inhalacja. Dla większości populacji źródła niklu stanowią jednak woda pitna i żywność. Niedawno w testach czajników kuchennych z odsłoniętymi elementami grzewczymi, wykonanymi ze stopów niklu wykazano uwalnianie znacznych ilości niklu do wody pitnej. W pracy omówiono trzy główne typy szkodliwego dla zdrowia wpływu ekspozycji na nikiel. Ostre zatrucia, jako wynik krótkoterminowej ekspozycji na wysokie stężenia polutantów, chroniczne nienowotworowe efekty powstające na skutek długotrwałej ekspozycji na stosunkowo niskie dawki oraz nowotwory płuc, nosa i zatok spowodowane inhalacją powietrza zanieczyszczonego niklem. Również rak gardła i żołądka przypisuje się wdychaniu związków niklu. Dokładny mechanizm kancerogenezy wywołanej przez nikiel pozostaje niejasny i wymaga dalszych badań. W pracy omówiono najbardziej popularne hipotezy wyjaśniające to zjawisko.
Źródło:
Journal of Elementology; 2008, 13, 4; 685-693
1644-2296
Pojawia się w:
Journal of Elementology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of selected structural properties of orthodontic arches
Autorzy:
Zięty, A.
Grygier, D.
Detyna, J.
Sarul, M.
Powiązania:
https://bibliotekanauki.pl/articles/284614.pdf
Data publikacji:
2018
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
orthodontic arches
biocompatibility
nickel
Źródło:
Engineering of Biomaterials; 2018, 21, 148; 47
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Composite coatings with nickel matrix and graphene as dispersed phase
Autorzy:
Gajewska-Midziałek, A.
Powiązania:
https://bibliotekanauki.pl/articles/778669.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
nickel
graphene
electrodeposition
composite coatings
Opis:
The paper presents the results of the studies of nickel-graphene composite coatings deposited by the electrochemical reduction method. A bath with low concentration of nickel ions, graphene as dispersed particles and organic compounds were used for deposition of the composite coatings nickel-graphene. The results of investigations of coatings deposited from the electrolyte containing 0.33, 0.5 and 1 g/dm3  graphene and two surface-active compounds were shown. The particles content in the coatings, the surface morphology, the cross-sectional structures of the coated samples, thickness and internal stresses were measured. Voltammetric method was used for examination of the corrosion resistance of samples of composite coatings in 0.5 M NaCl solution. The obtained results suggest that the content of incorporated graphene particles increases with an increasing amount of graphene in plating bath. The applications of organic addition agents was advantageous because it caused compressive stresses in the coatings. All of the nickel-graphene composite coatings had better corrosion resistance than the nickel coatings.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 1; 54-59
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Leaching behaviour of a turkish lateritic ore in the presence of additives
Autorzy:
Basturkcu, H.
Acarkan, N.
Powiązania:
https://bibliotekanauki.pl/articles/110446.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
laterite
nickel
agitation leaching
dissolution
Opis:
This paper investigates the dissolution mechanism of a lateritic nickel ore from the Caldag Region of Manisa in Turkey. The ore sample contained 1.2% Ni, 24.8% Fe, and 0.062% Co. The optimum leaching conditions were found to be temperature 80 oC, particle size -74 μm, H2SO4 concentration 200 g/dm3, solids ratio (by weight) 10% and leaching duration 8 h. The extractions of 98.2% Ni, 98.6% Fe and Co 98.9% were obtained under these conditions. Additionally, the effects of additional substances such as NaCl, Na2S2O5, Na2SO4, and KCl were investigated in order to decrease the leaching duration. The results showed that the additives accelerated the leaching kinetics and achieved nearly the same nickel and cobalt extractions at the end of 4 h compared to the results obtained after 8 h without the additives. If the additives containing chlorine were used, it was determined that the iron extraction showed no increase, although both the nickel and cobalt extractions increased.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 112-123
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Macrophytes as Ełk River Quality Status Evaluation Indicators Based on Example of Nickel
Autorzy:
Skorbiłowicz, E.
Skorbiłowicz, M.
Zamojska, E.
Ofman, P.
Wójtowicz, P.
Powiązania:
https://bibliotekanauki.pl/articles/123062.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
river
nickel
bottom sediment
macrophytes
Opis:
The aim of the study was to analyze the content of Ni in fractions of 1.0–0.2 mm, 0.2–0.1 mm, 0.1–0.063 mm, 0.063–0.02 mm, and <0.02 mm of river bottom sediments and plants (root, stem, leaf) of broadleaf cattail (Typha latifolia), yellow water lilies (Nuphar lutea), and cowbane (Cicuta virosa). Nickel content in bottom sediment was slightly higher than the geochemical background. The largest amounts of Ni were associated with the finest fraction, while the smallest with the thickest fraction. The highest content of this element was recorded at the point Ełk Barany, which was connected with developing industry in the city of Ełk. All of the tested plants showed greater Ni contents than the amount naturally occurring in plants. In most cases, most of Ni was associated with plant roots, and the least with leaves. It has been proven that aquatic plants can be good indicators of the aquatic environment status.
Źródło:
Journal of Ecological Engineering; 2016, 17, 3; 155-160
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Content of Selected Heavy Metals In Ni-Contaminated Soil Following the Application of Halloysite and Zeolite
Autorzy:
Radziemska, M.
Mazur, Z.
Powiązania:
https://bibliotekanauki.pl/articles/124419.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
halloysite
nickel
soil contamination
zeolite
Opis:
Nickel has been listed as a priory control pollutant by the United States Environmental Protection Agency (US EPA). Compared with other methods, the combination of vegetation and the addition of mineral sorbents to heavy metal-contaminated soils can be readily applied on a large scale because of the simplicity of technology and low cost. Halloysite and zeolite, among others, can be used for this purpose. A greenhouse study was performed to evaluate the feasibility of using natural zeolite, as well as raw and modified halloysite for the remediation of simulated Ni-contaminated soil. The soil was spiked with five doses of nickel, i.e. 0 (control), 80, 160, 240 and 320 mg·Ni kg-1·soil. The average accumulation of heavy metals in nickel-contaminated soil was found to follow the decreasing order of Ni>Zn>Cr>Cu>Pb. The highest reduction of Pb content was observed in soil samples taken from pots containing 80 and 160 mg·kg-1 of Ni along with the addition of modified halloysite. The strongest effects were caused by natural zeolite, which significantly reduced the average content of chromium. Contamination at 320 mg Ni·kg-1
Źródło:
Journal of Ecological Engineering; 2016, 17, 3; 125-133
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of sulfate-reducing bacteria and different organic fertilizer for bioremediation of ex-nickel mining soils
Autorzy:
Bakhtiar
Sukoso
Saida
Powiązania:
https://bibliotekanauki.pl/articles/35552128.pdf
Data publikacji:
2022
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
organic matter
pH
sulfate
nickel
Opis:
The microbiological activity associated with exmining soil remediation can be considered useful to accelerate the contaminant degradation. The use of sulfate-reducing bacteria (SRB) and organic matter exhibits potential in improving ex-nickel mining soil quality. The purpose of this study was to examine the ability of SRB in several organic fertilizers to reduce sulfate and nickel ions, and to increase pH of soil from nickel in mining areas. This study used the bacteria collection of the Soil Laboratory of the Faculty of Agriculture, Universitas Muslim Indonesia. Those were previously isolated from two cultivating pond of milkfish in the Kuri area of Maros Regency, South Sulawesi, Indonesia. The soil samples were collected from ex-mining areas of the Vale Indonesia Enterprise in Soroako, South Sulawesi, Indonesia. Those were mixed with organic fertilizers, generated from sugarcane sludge, manure, and Quickstick (Gliricidia sepium) leaves, each with 50 and 100 g doses. The 5 kg soil samples were put into a pot and mixed evenly with organic fertil- izers. A general linear model (GLM) repeated measures analysis of variance (ANOVA) was adopted to analyze the data. The results of this study indicate that the application of SRB and fertilizer was effective in reducing concentration of sulfate and nickel. Among the three types of organic fertilizers, manure was effective in reducing sulfate and nickel concentrations, while Quickstick fertilizer was the more effective in stabilizing pH level. Fertilizer doses exhibited a significant effect on decreasing sulfate and nickel concentrations, but it exhibited no significant effect on stabilizing pH levels. At 10 days after treatment (DAT), the sulfate concentration decreased from 2,530 ppm to 1,443 ppm in treatment of SRB and manure with dose of 50 g and 1,363 ppm with that of 100 g. At the end of the observation (30 DAT), those were decreased to 1,217 ppm in treatment of SRB and manure with doses of 50 g and 1,167 ppm with that of 100 g. Among the three types of organic fertilizers used, Quickstick demonstrates the more effective reduction rate. At 10 DAT, pH increased in SRB treatment by 7.06 at a concentration of 50 g and 7.01 at a concentration of 50 g. At the end of the observation (30 DAT), the pH became 6.67 at a concentration of 50 g and 6.82 at a concentration of 50 g. The nickel concentration decreased from an origin concentration to 1,950 ppm in treatment of SRB and manure with doses of 50 g and 1,690 ppm with that of 100 g. Thus, the application of manure fertilizer and the addition of SRB is recommended for bioremediation of sulfate and nickel from ex-mining soil.
Źródło:
Scientific Review Engineering and Environmental Sciences; 2021, 30, 4; 561-572
1732-9353
Pojawia się w:
Scientific Review Engineering and Environmental Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of environmental parameters on the concentration of nickel (Ni) in bones of the hip joint from patients with osteoarthritis
Autorzy:
Łanocha-Arendarczyk, Natalia
Kalisińska, Elżbieta
Kosik-Bogacka, Danuta
Budis, Halina
Lewicka, Katarzyna
Sokołowski, Sebastian
Dobiecki, Konrad
Kołodziej, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/972587.pdf
Data publikacji:
2016
Wydawca:
Instytut Medycyny Wsi
Tematy:
bone
nickel
environmental exposure
implants
Opis:
Introduction. Bone trace elements levels including nickel (Ni) depend on biological and environmental factors: age, gender, remodeling state, exposure to occupational and environmental pollution, smoking, diet, and surgical implants. Objective. The aim of this study was to determine Ni concentrations in bones of femur heads obtained from patients with osteoarthritis. Materials and method. A total of 111 samples of hip joint bones (cartilage, cancellous bone and compact bone) collected from patients from north-western Poland were examined. Ni concentration was determined by ICP-AES (atomic absorption spectrophotometry). Results. It was found that differences in Ni concentrations were statistically significant between cartilage and compact bone. Cartilage Ni concentrations were higher in patients with fractured femur neck than patients with osteoarthritis. Furthermore, higher Ni levels were also found in samples obtained from smokers compared to nonsmokers. In cancellous bone, higher Ni concentrations were found in samples from patients who had received implants than those without them. Moreover, higher Ni concentrations in cancellous bone were found in patients occupationally exposed to heavy metals than in those not exposed. Conclusions. The bone tissue reflects long-term exposure to Ni and may be used as a bioindicator to study the process of Ni accumulation in the human body.
Źródło:
Journal of Pre-Clinical and Clinical Research; 2016, 10, 1; 6-11
1898-2395
Pojawia się w:
Journal of Pre-Clinical and Clinical Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of Cu2+ and Ni2+ ions from aqueous solutions using waste dried activated sludge biomass
Autorzy:
Aslan, S.
Yildiz, S.
Ozturk, M.
Powiązania:
https://bibliotekanauki.pl/articles/777992.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
adsorption
copper
nickel
waste biomass
Opis:
Adsorption of Cu(II) and Ni(II) ions onto the waste powdered activated sludge biomass (PWB), which was obtained from the biological wastewater treatment plant, was investigated in this experimental study. The effects of contact time, pH, temperature, initial sorbate and sorbent concentrations on the adsorption were determined. The BET surface area, pore volume, and pore diameter of PWB were found to be about 0.51 m2/g, 0.0053 cm3/g, and 41.4 nm, respectively. Considering the R2  value, qexp  and qcal , the Langmuir and Freundlich models were well described for Cu(II) and Ni(II) adsorption, respectively. The adsorption mechanism of Cu(II) and Ni(II) onto the PWB could be better simulated by the pseudo-second-order kinetic mechanism than the pseudo-first-order, intra particle diffusion and Elovich models. Thermodynamic aspects of the adsorption of heavy metals were also investigated. Considering the applied desorbing agents for reuse of PWB for Ni(II) recovery, desorption cycle is not feasible due to the deterioration of the PWB structure.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 3; 20-28
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure and Properties of Ni/Diamond Nanocrystalline Coatings
Autorzy:
Mazurek, A.
Trzaska, M.
Powiązania:
https://bibliotekanauki.pl/articles/350997.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
diamond
nickel/diamond
composite coatings
Opis:
This paper presents the results of research of Ni/diamond composite coatings produced by electrochemical reduction method. Research was focused on composite coatings with nickel matrix and diamond as a disperse phase and for comparison purposes on nanocrystalline nickel coatings. Ni/diamond composite coatings were produced in baths with different content of nanodiamond powder. The structures of the dispersed phase and the composite coatings were analysed by using X-ray diffraction, scanning electron microscopy and light microscopy. Measurements of selected properties of the coatings were performed, including roughness, microhardness, adhesion and abrasive wear resistance. The research results indicate that the produced coatings have a compact structure and good adherence to steel substrate. Moreover, nanocrystalline Ni/diamond composite coatings exhibit greater hardness and reduced abrasive wear resistance compared to nanocrystalline nickel coatings.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 4; 1309-1314
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Creep Behaviour of Modified Mar-247 Superalloy
Autorzy:
Cieśla, M.
Mańka, M.
Binczyk, F.
Gradoń, P.
Powiązania:
https://bibliotekanauki.pl/articles/354216.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nickel superalloys
creep
macrostructure
microstructre
Opis:
The paper presents the results of analysis of creep behaviour in short term creep tests of cast MAR-247 nickel-based superalloy samples made using various modification techniques and heat treatment. The accelerated creep tests were performed under temperature of 982 °C and the axial stresses of σ = 150 MPa (variant I) and 200 MPa (variant II). The creep behaviour was analysed based on: creep durability (creep rupture life), steady-state creep rate and morphological parameters of macro- and microstructure. It was observed that the grain size determines the creep durability in case of test conditions used in variant I, durability of coarse-grained samples was significantly higher.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 2A; 701-704
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Distribution of nickel in fractions extracted with the BCR procedure from nickel-contaminated soil
Rozmieszczenie niklu we frakcjach wydzielonych wg procedury BCR w glebie zanieczyszczonej tym metalem
Autorzy:
Kuziemska, B.
Kalembasa, S.
Wieremiej, W.
Powiązania:
https://bibliotekanauki.pl/articles/15035.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie / Polskie Towarzystwo Magnezologiczne im. Prof. Juliana Aleksandrowicza
Tematy:
soil
liming
sewage sludge
nickel fraction
distribution
BCR method
nickel
contaminated soil
soil pollution
Opis:
The objective of the study was to evaluate the impact of liming and the application of waste organic material, i.e. sewage sludge, on the content and distribution of nickel in the fractions extracted with the BCR procedure from soil contaminated with this metal. The study was carried out on soil after a 3-year pot experiment, which included the following factors: I – nickel used in the incremental amounts 0, 50, 100 mg Ni kg-1 soil; II – liming (0 Ca and Ca according to 1 Hh of soil); and III – the addition of sewage sludge (with and without the addition of sewage sludge at the introducing dose of 2 g C kg-1 soil). The test plant was cocksfoot harvested four times (four swaths) in each plant growing season. The total content of nickel was determined with ICP-AES and its fractions with the three-stage BCR procedure. The introduction of nickel into the soil resulted in an increase in its total content and in all fractions as well as in its percentage in the exchangeable fraction. Liming reduced the mobility of nickel and decreased its content in the reducible fraction, whil inccreasing it in the residual fraction. The application of sewage sludge contributed to an increase in the total content of nickel in soil and its proportion in the oxidizable fraction. Liming and the application of sewage sludge reduced the mobility of nickel. Lime and waste organic material (i.e. sewage sludge) were found to be suitable materials for reduction of the mobility of nickel in soil contaminated with this metal.
Celem pracy była ocena wpływu wapnowania i wprowadzenia do gleby odpadowego materiału organicznego – osadu ściekowego na zawartość i rozmieszczenie niklu we frakcjach wydzielonych wg procedury BCR w glebie zanieczyszczonej tym metalem. Badaniami objęto glebę po trzyletnim doświadczeniu wazonowym, w którym uwzględniono następujące czynniki: I – nikiel stosowany we wzrastających dawkach (0, 50, 100 mg Ni kg-1 gleby); II – wapnowanie (0 Ca i Ca wg 1 Hh gleby); III – dodatek osadu ściekowego (bez dodatku i z dodatkiem osadu ściekowego w dawce wprowadzającej 2 g C kg-1 gleby). Rośliną testową była trawa kupkówka pospolita (Dactylisglomerata L.), zbierana każdego roku w czterech pokosach (odrostach). Ogólną zawartość niklu oznaczono metodą ICP-AES, a jego frakcje trzystopniową metodą BCR. Wprowadzenie niklu do gleby spowodowało nie tylko wzrost jego zawartości ogólnej i we wszystkich frakcjach, a jednocześnie zwiększenie procentowego udziału we frakcji wymiennej. Wapnowanie gleby ograniczyło mobilność niklu, zmniejszył się jego udział we frakcji redukowalnej, zwiększył we frakcji rezydualnej. Zastosowany osad ściekowy spowodował zwiększenie ogólnej ilości niklu w glebie i jego udziału we frakcji utlenialnej. Wapnowanie i osad ściekowy ograniczyły mobilność niklu. Wapnowanie oraz zastosowany w doświadczeniu odpadowy materiał organiczny – osad ściekowy okazały się dobrymi materiałami zmniejszającymi mobilność niklu na glebach zanieczyszczonych tym metalem.
Źródło:
Journal of Elementology; 2014, 19, 3
1644-2296
Pojawia się w:
Journal of Elementology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparing the cocoa butter replacer by fractional crystallisation of hydrogenated rapeseed oil
Autorzy:
Pawlowicz, R.
Drozdowski, B.
Hazuka, Z.
Powiązania:
https://bibliotekanauki.pl/articles/1372546.pdf
Data publikacji:
1996
Wydawca:
Instytut Rozrodu Zwierząt i Badań Żywności Polskiej Akademii Nauk w Olsztynie
Tematy:
fat industry
hydrogenation
crystallization
cocoa butter
fat chemistry
nickel catalyst
sulphur-modified nickel
rapeseed oil
Opis:
The rapeseed oil was hydrogenated with sulphur modified nickel catalyst. The parameters of hydrogénation process were found not to affect the physical properties of fats having the same hydrogénation degree. The conditions of fractional crystallisation from acetone of hydrogenated rapeseed oil were optimised for a high yield of the fat replacing cocoa butter. At 22°C and 2°C for the first and second crystallisation, respectively, such product was obtained with an over 60% yield as the middle fraction out of three that were isolated. The degree of hydrogenation of the fractionated fat did not affect the physical properties of the cocoa butter replacer, although it affected the yield. The physical properties of the fractions after the crystallisation of hydrogenated fat resulted mostly from high differences in the content of saturated and trans-unsaturated fatty acids.
Po przeprowadzeniu szeregu uwodornień oleju rzepakowego w obecności katalizatora niklowego modyfikowanego siarką (Rys. 2a) stwierdzono, że zastosowane parametry procesu nie miały istotnego wpływu na własności fizyczne tłuszczu o tym samym stopniu uwodornienia (Rys. 3). Tłuszcz uwodorniony poddano frakcjonowanej krystalizacji z acetonu (Rys. 1). Stwierdzono, że optymalnymi warunkami frakcjonowania są temperatura 22°C przy pierwszej krystalizacji i 2°C przy drugiej krystalizacji. Stosując te parametry otrzymano z uwodornionego oleju rzepakowego tłuszcz mogący znaleźć zastosowanie jako zamiennik masła kakaowego (Rys. 4a). Produkt ten, stanowiący środkową spośród trzech wydzielonych frakcji, otrzymano z wydajnością ponad 60% (Tab. 1). Z oleju rzepakowego o różnym stopniu uwodornienia otrzymano namiastki masła kakaowego o takich samych własnościach fizycznych (Rys. 6). Stwierdzono duży wpływ stopnia uwodornienia tłuszczu poddanego krystalizacji na wydajność frakcji właściwej (Tab. 2). Znaczne różnice we własnościach fizycznych otrzymanych frakcji spowodowane są głównie bardzo dużymi różnicami w zawartości kwasów nasyconych, jak również kwasów nienasyconych w konfiguracji trans (Tab. 2).
Źródło:
Polish Journal of Food and Nutrition Sciences; 1996, 05, 3; 37-48
1230-0322
2083-6007
Pojawia się w:
Polish Journal of Food and Nutrition Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rare occupational cause of nasal septum perforation: Nickel exposure
Autorzy:
Bolek, Ertugrul C.
Erden, Abdulsamet
Kulekci, Cagri
Kalyoncu, Umut
Karadag, Omer
Powiązania:
https://bibliotekanauki.pl/articles/2161840.pdf
Data publikacji:
2017-10-06
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
occupational medicine
nickel
nickel exposure
nasal septum perforation
occupational toxic heavy metal exposure
inhalation toxicity
Opis:
Many etiologies are held accountable for nasal septum perforations. Topical nasal drug usage, previous surgeries, trauma, nose picking, squamous cell carcinoma, some rheumatological disorders such as granulomatosis with polyangiitis (Wegener granulomatosis), some infectious diseases such as syphilis and leprosy are among the causes of the perforations. Occupational heavy metal exposures by inhalation rarely may also cause nasal septum perforation. Here, we present a 29-year-old patient without any known diseases, who is a worker at a metallic coating and nickel-plating factory, referred for investigation of his nasal cartilage septum perforation from an otorhinolaryngology clinic. The patient questioning, physical examination and laboratory assessment about rheumatic and infectious diseases were negative. There was a metallic smell in the breath during the physical examination. The analysis showed serum nickel level at 31 μg/l and urine nickel at 18 μg/l (84.11 μg/g creatinine). Other possible serum and urine heavy metal levels were within normal ranges. Nickel exposure is usually together with other heavy metals (chromium or cadmium), it is rarely alone. Nickel ingested by inhalation usually leads to respiratory problems such as reduced olfactory acuity, ulcers, septum perforation or tumors of the nasal sinuses. This case demonstrates the importance of occupational anamnesis and awareness of diagnosis. Int J Occup Med Environ Health 2017;30(6):963–967
Źródło:
International Journal of Occupational Medicine and Environmental Health; 2017, 30, 6; 963-967
1232-1087
1896-494X
Pojawia się w:
International Journal of Occupational Medicine and Environmental Health
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
N-myc downstream regulated 1 gene and its place in the cellular machinery
Autorzy:
Kitowska, Agnieszka
Pawełczyk, Tadeusz
Powiązania:
https://bibliotekanauki.pl/articles/1040413.pdf
Data publikacji:
2010
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
NDRG1
cancer
hypoxia
metastases
nickel
Opis:
The exact function of the protein product of N-myc downstream regulated 1 gene (NDRG1) is unclear. Depending on the tissue type the NDRG1 protein is localized in the cytoplasm, nucleus, mitochondrion or membranes. Moreover, the expression of NDRG1 may be altered by several factors such as hypoxia, heavy metals, DNA damage, hormones, oncogene, and tumor-suppressor genes. A number of studies emphasize the role of NDRG1 in cancerogenesis. Presumably NDRG1 participates in angiogenesis, metastases, and mechanisms leading to anti-cancer drug resistance. This review summarizes current knowledge about the NDRG1 gene and the position of NDRG1 protein in the cellular machinery. The role of NDRG1 in cancer pathogenesis and its possible usefulness as a prognostic factor for patients with cancer is also discussed.
Źródło:
Acta Biochimica Polonica; 2010, 57, 1; 15-21
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nickel in the environment
Autorzy:
Harasim, P.
Filipek, T.
Powiązania:
https://bibliotekanauki.pl/articles/14480.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie / Polskie Towarzystwo Magnezologiczne im. Prof. Juliana Aleksandrowicza
Tematy:
environment
nickel
micronutrient
heavy metal
allergen
Opis:
The importance of nickel (Ni) in the environment is an issue that is gaining broader recognition. While nickel is an element essential for plants, it is also a heavy metal. Nickel is a component of nine metalloenzymes, including urease, which participates in urea hydrolysis. It also helps some plants to protect themselves against pathogens and herbivorous insects. There are many sources of Ni in the environment, which can be a problem because at higher concentrations this element is toxic to plants and other living organisms. Therefore, standards have been defined for the Ni content in air, water, soil and plants. Its content is monitored in the air. More and more frequently, attention is paid to this element as an allergen in humans. In the world, attempts have been made to phytoextract nickel from contaminated soils using nickelphilous plants, the so-called hyperaccumulators, and even to recover the metal from these plants by so-called phytomining. On the other hand, nickel-containing fertilizers are marketed and used in cases of nickel deficiency in plants. In industry, this element is primarily used for the production of steel and alloys. The most recent application of nickel is related to graphene, which was invented 10 years ago. Although nickel contamination does not occur in Poland, we cannot rule out this risk in the future. Thus, it is important to monitor the fate of nickel in the environment.
Źródło:
Journal of Elementology; 2015, 20, 2
1644-2296
Pojawia się w:
Journal of Elementology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation of Nickel Nanoparticles Using Nickel Raffinate Separated by Solvent Extraction from The Spent FeCl3 Etching Solution
Autorzy:
Park, Il-Jeong
Swain, Basudev
Kim, Dae-Weon
Kim, Geon-Hong
Han, Deok-Hyun
Jung, Hang-Chul
Powiązania:
https://bibliotekanauki.pl/articles/354453.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nickel
recycling
solvent extraction
chemical reduction
Opis:
FeCl3 bearing etching solution is mainly used for etching of metals used in shadow masks, PCBs and so on. Due course of Invar alloy etching process the FeCl3 bearing etching solution get contaminated with Ni2+ which affect adversely the etching efficiency. Hence, FeCl3 bearing etching solution discarded after several cycle of operation causes an environmental and economic problem. To address both the issues the etching solution was purified through solvent extraction and remained Ni2+ recovered by wet chemical reduction using hydrazine. For optimum Fe3+ extraction efficiency, various extraction parameter were optimized and size and morphology of the recovered pure Ni powder was analyzed. The reported process is a simple process to purify and recover Ni from industry etching solution.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 2; 531-534
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Research Regarding the Rolling Technology of the Fe-Ni Alloys
Autorzy:
Bordei, Marian
Tudor, Beatrice
Powiązania:
https://bibliotekanauki.pl/articles/2106568.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
iron-nickel
rolling technology
mechanical characteristics
Opis:
In the domain of the equipment and apparatus construction, a permanent preoccupation worldwide is ensuring technical performances and high fiability in exploitation. The users’ requirement growth in this field led to producing materials with high characteristics such as iron-nickel alloys having a high nickel content with special magnetic, thermal, or elastic properties. The theoretical and experimental researches had the aim of obtaining cold rolled strip, thin (2.6 mm) and narrow (86 mm) from iron-nickel alloys with 41% Ni (low content of C: 0.02-0.04%; Fe: 58%; other elements: Mn, Si, Cu, Cr, Al: under 1%). Our own experiments aimed to establish an optimal cold rolling technology of hot rolled strips of iron-nickel alloys, in order to obtain cold rolled strips with superior mechanical and technological characteristics, strip profile according to current standards, including a finished product characterization.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 2; 501--505
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ethanol oxidation reaction at Pd-modified nickel foam obtained by PVD method
Autorzy:
Mikołajczyk, T.
Turemko, M.
Pierożyński, B.
Powiązania:
https://bibliotekanauki.pl/articles/949482.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
PVD
nickel foam
electrochemical impedance spectroscopy
Opis:
In this study, palladium-modified nickel foam substrate was applied to examine ethanol oxidation reaction (EOR) in 0.1 M NaOH supporting solution. An EOR catalyst was prepared by physical vapour deposition (PVD) of palladium onto Ni foam material. Temperature-dependent kinetics of the EOR were studied over the temperature range: 20-60°C by means of a.c. impedance spectroscopy and cyclic voltammetry techniques. Deposition of a noble metal additive was clearly exposed through scanning electron microscopy: SEM/EDX-supported analysis. Most importantly, this work investigated the effect of pre-deposited fullerene on nickel foam, on the catalytic (EOR) properties of such-produced Ni foam/Pd composite material.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 2; 47-50
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tissue reaction to the nickel implants in the guinea pigs
Autorzy:
Kręcisz, Beata
Kieć-Świerczyńska, Marta
Piasecka-Zelga, Joanna
Chomiczewska-Skóra, Dorota
Stetkiewicz, Jan
Powiązania:
https://bibliotekanauki.pl/articles/2180087.pdf
Data publikacji:
2012-06-01
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
nickel implants
contact allergy
Guinea pigs
Opis:
Objectives: The aim of the study was the assessment of local tolerance to nickel implants during 9 months observation in guinea pigs sensitized to nickel before implantation and non-sensitized ones. Materials and Methods: Three groups of guinea pigs were included in the study: 10 sensitized to nickel by the guinea pig maximization test; 10 previously nonsensitized and 10 in control group. In 20 animals (except control group) the nickel implants were inserted in the muscle of the back. After 9 months of observation, the animals were patch-tested with 5% nickel sulfate. Also percentage of eosinophils in peripheral blood was examined. Next, the tissue surrounding the implant and skin from the area of patch tests were collected for the histological examination. Results: In 70% of previously sensitized animals, the patch test confirmed the sensitivity to nickel. In 60% of previously non-sensitized animals, a positive reaction to nickel occurred. The results of patch tests in control group were negative. Percentage of eosinophils in peripheral blood was fourfold higher in animals sensitized to nickel than in control group. In histological examination, in the tissue surrounding the implant a dissimilarity concerning the intensity of cellular infiltration was observed between animals previously allergic and non-allergic to nickel. In the 2 of 10 previously sensitized guinea pigs quite severe inflammatory reactions in the inside of connective tissue capsule were noted which may indicate a local allergic reaction. The histological images of skin collected from the positive patch test site corresponded with the typical allergic contact dermatitis. Conclusions: Nickel implants may cause primary sensitization to nickel. The nature of the histological changes in the tissues around the implants in guinea pigs sensitized to nickel may correspond to an allergic reaction. The examination of percentage of eosinophils in blood of guinea pigs may be useful in assessing the allergenic activity of metal alloys containing nickel.
Źródło:
International Journal of Occupational Medicine and Environmental Health; 2012, 25, 3; 251-257
1232-1087
1896-494X
Pojawia się w:
International Journal of Occupational Medicine and Environmental Health
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electroplating nickel onto uranium as fission-recoil barrier
Autorzy:
Cieszykowska, I.
Żółtowska, M.
Mielcarski, M.
Powiązania:
https://bibliotekanauki.pl/articles/146450.pdf
Data publikacji:
2009
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
uranium
nickel
plating
fission-recoil barriers
Opis:
Plating experiments have been performed in order to obtain fission recoil barriers on low-enriched uranium (LEU) metal foils used as targets suitable for the production of 99Mo. The results of Ni deposition obtained in electroplating and electroless plating baths are presented. The best method of pretreatment uranium prior to plating is suggested. It was found that etching in solutions containing NiCl2 gave better results on uranium rods, whereas electroplating produces coatings with the desired level of adherence and coverage on uranium foils. The thickness of the nickel plates, evaluated both microscopically and gravimetrically, is sufficient to act as a fission recoil barrier.
Źródło:
Nukleonika; 2009, 54, 1; 29-32
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Manganese oxide based aerogels
Autorzy:
Rudnicka, Małgorzata
Łata, Joanna
Kupracz, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/1161877.pdf
Data publikacji:
2018
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
aerogel
cobalt
manganese
nickel
supercritical drying
Opis:
High purity inorganic aerogels synthetized during sol-gel process show considerable potential for large-scale production. Cobalt-manganese oxides, manganese-nickel oxides and cobalt-manganese-nickel oxides aerogels were obtained during gelation process of transition metal salts. All samples were dried in supercritical conditions. Their specific surface was obtained using both Brunauer-Emmet-Teller and Langmuir methods. Moreover, images received from SEM helped to confirm porous structure.
Źródło:
World Scientific News; 2018, 112; 217-225
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laser heat treatment of nickel-based alloys – a review
Autorzy:
Kukliński, Mateusz
Szymański, Michał
Przestacki, Damian
Powiązania:
https://bibliotekanauki.pl/articles/94176.pdf
Data publikacji:
2019
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
nickel
laser
heat treatment
surface
coating
Opis:
In this paper researches which focus on laser heat treatment of nickel-based alloys are reviewed. Studies published from 1970s until today are taken into consideration. Publications which focus on influence of laser thermal processing on surface layer condition both on solid materials and predeposited coatings are described. Laser technologies in which additional materials are delivered during the process are not considered. In order to focus on studies investigating microstructural changes resulting mainly from material remelting, laser shock processing is also disregarded.
Źródło:
Archives of Mechanical Technology and Materials; 2019, 39; 46-53
2450-9469
Pojawia się w:
Archives of Mechanical Technology and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorption of Ni2+ from aqueous solution by magnetic Fe@graphite nano-composite
Autorzy:
Konicki, W.
Pelka, R.
Arabczyk, W.
Powiązania:
https://bibliotekanauki.pl/articles/778219.pdf
Data publikacji:
2016
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
magnetic nanocomposite
iron nanoparticles
nickel
adsorption
Opis:
The removal of Ni2+  from aqueous solution by iron nanoparticles encapsulated by graphitic layers (Fe@G) was investigated. Nanoparticles Fe@G were prepared by chemical vapor deposition CVD process using methane as a carbon source and nanocrystalline iron. The properties of Fe@G were characterized by X-ray Diffraction method (XRD), High-Resolution Transmission Electron Microscopy (HRTEM), Fourier Transform-Infrared Spectroscopy (FTIR), BET surface area and zeta potential measurements. The effects of initial Ni2+  concentration (1–20 mg L−1 ), pH (4–11) and temperature (20–60°C) on adsorption capacity were studied. The adsorption capacity at equilibrium increased from 2.96 to 8.78 mg g−1 , with the increase in the initial concentration of Ni2+  from 1 to 20 mg L−1  at pH 7.0 and 20°C. The experimental results indicated that the maximum Ni2+  removal could be attained at a solution pH of 8.2 and the adsorption capacity obtained was 9.33 mg g−1 . The experimental data fitted well with the Langmuir model with a monolayer adsorption capacity of 9.20 mg g−1 . The adsorption kinetics was found to follow pseudo-second-order kinetic model. Thermodynamics parameters, ΔHO, ΔGO and ΔSO, were calculated, indicating that the adsorption of Ni2+  onto Fe@G was spontaneous and endothermic in nature.
Źródło:
Polish Journal of Chemical Technology; 2016, 18, 4; 96-103
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Equilibrium and kinetics studies for the adsorption of Ni2+ and Fe3+ ions from aqueous solution by graphene oxide
Autorzy:
Konicki, W.
Aleksandrzak, M.
Mijowska, E.
Powiązania:
https://bibliotekanauki.pl/articles/778711.pdf
Data publikacji:
2017
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
nickel
iron
graphene oxide
adsorption
kinetics
Opis:
In this study, the adsorption of Ni2+  and Fe3+  metal ions from aqueous solutions onto graphene oxide (GO) have been explored. The effects of various experimental factors such as pH of the solution, initial metal ion concentration and temperature were evaluated. The kinetic, equilibrium and thermodynamic studies were also investigated. The adsorption rate data were analyzed using the pseudo-first-order kinetic model, the pseudo-second-order kinetic model and the intraparticle diffusion model. Kinetic studies indicate that the adsorption of both ions follows the pseudo-second-order kinetics. The isotherms of adsorption data were analyzed by adsorption isotherm models such as Langmuir and Freundlich. Equilibrium data fitted well with the Langmuir model. The maximum adsorption capacities of Ni2+  and Fe3+  onto GO were 35.6 and 27.3 mg g-1 , respectively. In addition, various thermodynamic parameters, such as enthalpy (ΔHO), entropy (ΔSO) and Gibbs free energy (ΔGO), were calculated.
Źródło:
Polish Journal of Chemical Technology; 2017, 19, 3; 120-129
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Catalytic activity of Pd-Ni in the oxidation of hydrogen for the safety of Catalytic activity of Pd-Ni in the oxidation of hydrogen for the safety of nuclear power plan
Autorzy:
Łomot, D.
Karpiński, Z.
Powiązania:
https://bibliotekanauki.pl/articles/779451.pdf
Data publikacji:
2016
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
palladium
palladium-nickel
catalyst
hydrogen oxidation
Opis:
Pd-Ni/Al2O3 systems were investigated in the reaction of hydrogen oxidation in terms of their possible application as catalysts used in passive autocatalytic recombiners (PARs) used in nuclear power plants. Testing experiments were carried out in a flowing system at different temperatures and humidity of the reaction mixture. The bimetallic catalysts exhibited higher response to the increase of temperature and higher resistance to inhibit water than the monometallic palladium catalyst. They showed excellent stability during a few tens of hours, similarly, like their monometallic counterpart. Our bimetallic catalysts of hydrogen oxidation can be used as cheaper alternatives to catalysts based on the precious metals in the hydrogen oxidation without loss of their activity over time.
Źródło:
Polish Journal of Chemical Technology; 2016, 18, 1; 15-18
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Content of copper and nickel in soils of Vistula river catchment
Autorzy:
Skorbiłowicz, E.
Samborska, A.
Powiązania:
https://bibliotekanauki.pl/articles/124869.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
soil
copper
nickel
Vistula river catchment
Opis:
Metal pollution attracts growing interest mainly due to their toxic effects on the entire natural environment. It is therefore necessary to monitor, not to exceed acceptable standards of elements in ecosystems. Heavy metals in soils are derived from natural and anthropogenic sources. The purpose of this article is to present the contents of copper and nickel in agricultural soils within the Vistula river catchment based on research carried out by the Institute of Soil Science and Plant Cultivation in the period since 1995 to 2010. The assessment of a degree of soil contamination by these elements according to standards has been also performed. It has been proven that about 91% of agricultural soils in Vistula river catchment shows natural (0°), while approximately 9% higher (Io) copper concentrations. It was found that in the total agricultural area of the Vistula river catchment, soils not contaminated with nickel (0°), with elevated (Io), and weakly contaminated soils (IIo) are respectively 85%, 11%, 4% of the analyzed soils area. There was a significant relationship between the content of copper and nickel in soils and such features as organic matter and pH. Analysis of results confirmed that the highly developed industrial activity affects the increased amount of pollutants in soils; the greatest accumulation occurred in soils of the upper Vistula river catchment, which is caused primarily by interaction of the Upper Silesian Industrial District.
Źródło:
Journal of Ecological Engineering; 2014, 15, 2; 53-59
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Protective role of silibinin over nickel sulfate-induced reproductive toxicity in male rats
Autorzy:
Temamogullari, F.
Atessahin, A.
Cebi Sen, C.
Yumusak, N.
Dogru, M.S.
Powiązania:
https://bibliotekanauki.pl/articles/2087235.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nickel
silibinin
male
rats
reproductive toxicity
Źródło:
Polish Journal of Veterinary Sciences; 2021, 24, 1; 29-34
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of Ni(II) Ions by Citric Acid-Functionalised Aloe vera Leaf Powder – Characterisation, Kinetics, and Isotherm Studies
Autorzy:
Al-Amrani, Waheeba Ahmed
Abdullah, Rohaizan
Megat Hanafiah, Megat Ahmad Kamal
Suah, Faiz Bukhari Mohd
Powiązania:
https://bibliotekanauki.pl/articles/24201761.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
Aloe vera
biosorption
isotherm
nickel
wastewater
Opis:
Aloe vera leaves (AVL), a by-product of agricultural waste, have been applied as a biosorbent for reducing Ni(II) ions in aqueous solutions. The biosorption capability of AVL powder was enhanced through chemical treatment with 0.10 M citric acid solution. Fourier-transform infrared (FTIR) spectrophotometer, scanning electron microscope coupled with energy dispersive X-ray (SEM-EDX), pH of point-zero-charge (pHPZC), and pHslurry analyses were used to study the surface, and chemical properties of citric acid-treated Aloe vera leaf powder (CAAVLP). The setting for experiments such as pH solution, CAAVLP dose, initial concentration, and biosorption time was investigated. Maximum Ni(II) ion biosorption capability was determined to be 48.65 mg/g based on the Langmuir model at pH 6, a CAAVLP dose of 0.02 g, initial Ni(II) concentrations of 5 to 50 mg/L and biosorption time of 120 min. The data for the isotherm and kinetics were well matched with the Freundlich and pseudo-second-order models, respectively, with high regression correlation (R2) and low chi-square (χ2) values. The presence of more-COOH groups after treating AVL with citric acid resulted in more Ni(II) ions being able to be removed.
Źródło:
Journal of Ecological Engineering; 2023, 24, 4; 217--227
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of nickel(II) from industrial wastewater using selected methods: a review
Autorzy:
Kruszelnicka, Izabela
Ginter-Kramarczyk, Dobrochna
Góra, Wojciech
Staszak, Katarzyna
Baraniak, Marek
Lota, Grzegorz
Regel-Rosocka, Magdalena
Powiązania:
https://bibliotekanauki.pl/articles/2202888.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nickel
nickel removal
wastewater
adsorption
electrocoagulation
membrane techniques
nikiel
usuwanie niklu
ścieki
adsorpcja
elektrokoagulacja
techniki membranowe
Opis:
Due to the increasing problem resulting from environmental pollution with heavy metals, great emphasis is placed on the development of removal methods of these pollutants from the environment. This study presents a literature review on the methods for the removal of nickel ions from aqueous solutions such as sorption, especially using low-cost sorbents which are very popular in 21 century, electrochemical processes and membrane techniques. It is often impossible to use a single technique for efficient removal of heavy metals from wastewater as the process depends on many factors, such as wastewater composition, pH, temperature and many others. The aim of this review is to present some selected removal techniques of nickel(II) from wastewater from the point of view of their efficiency and applicability.
Źródło:
Chemical and Process Engineering; 2022, 43, 4; 437--448
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigations of Ni content in human hair
Badania nad zawartoscia niklu we wlosach ludzkich
Autorzy:
Dlugaszek, M
Szopa, M.
Mularczyk-Oliwa, M.
Powiązania:
https://bibliotekanauki.pl/articles/14350.pdf
Data publikacji:
2009
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie / Polskie Towarzystwo Magnezologiczne im. Prof. Juliana Aleksandrowicza
Tematy:
hair
human hair
nickel
bioelement
investigation
toxic metal
atomic absorption spectrometry
statistical analysis
nickel concentration
woman
man
Opis:
Effect of nickel (Ni) on human organism is still evaluated, although there are few research papers dedicated to this problem. The participation of Ni in carcinogenesis and allergic reactions is considered. Nickel is absorbed through the alimentary tract, lungs and skin. Concentration of Ni in blood and urine is low (about 1 μg L-1). More nickel has been determined in tissues such as liver, lungs and osseous tissue. The aim of this work was to assess the Ni level in human hair (n = 220, 110 women and 110 men) and correlations between Ni and other elements i.e. calcium (Ca), magnesium (Mg), zinc (Zn), iron (Fe), lead (Pb), and cadmium (Cd). Hair washed with acetone and redistilled water was mineralized in mixture of HNO3 and HClO4 acids. Content of the elements was determined by the atomic absorption spectrometry method AAS. Concentrations of Ca, Mg, Zn, Cu, and Fe was measured by the flame technique (FAAS), while concentration of Pb, Cd and Ni was analyzed by the electrothermal atomic absorption spectrometry in a graphite furnace (GFAAS). The data were the subject of statistical analysis. The mean Ni concentration in the hair samples was 0.24 μg g-1 (median 0.17 μg g-1, range 0.01-1.77 μg g-1). Slightly more Ni was found in hair of women (0.25 μg g-1) than of men (0.22 μg g-1). Statistically higher concentrations of Ni were noticed in hair of men > 20 years than in younger men (p<0.05). Statistically significant positive correlations (for Zn, negative correlation) were established between Ni and Cd, Pb, and Cu concentration. Hair is available easily and noninvasively for tests and owing to a higher Ni level in hair than in physiological fluids, such tests help reduce analytical error. Therefore, hair is a very suitable material for monitoring elements in the human body.
Oddziaływanie niklu (Ni) na organizm człowieka nadal jest przedmiotem badań, jednak liczba opublikowanych prac poświęconych tej tematyce jest niewielka. Rozpatrywany jest udział tego pierwiastka w procesie kancerogenezy oraz jako czynnika wywołującego alergię. Główne drogi wchłaniania Ni to przewód pokarmowy, płuca i skóra. Stężenie tego pierwiastka we krwi i moczu jest niskie i wynosi ok. 1 μg L-1. Większe jego ilości oznaczono w tkankach (wątrobie, płucach, tkance kostnej). Celem pracy była ocena zawartości Ni we włosach (n=220, 110 kobiet i 110 mężczyzn) oraz korelacji między jego stężeniem a stężeniem innych pierwiastków: wapniem (Ca), magnezem (Mg), cynkiem (Zn), żelazem (Fe), ołowiem (Pb) i kadmem (Cd). Włosy umyte w acetonie i wodzie mineralizowano na mokro w mieszaninie kwasów HNO3 i HClO4. Zawartość pierwiastków oznaczano metodą spektrometrii absorpcji atomowej (AAS). Stężenie Ca, Mg, Zn, Cu i Fe wykonano techniką płomieniową (FAAS), natomiast Pb, Cd i Ni techniką bezpłomieniową w piecu grafitowym (GFAAS). Otrzymane dane poddano analizie statystycznej. Zawartość pierwiastków podano w zależności od płci i wieku. Średnia zawartość Ni w badanych próbkach włosów wynosiła 0,24 μg g-1 (mediana 0,17 μg g-1, rozrzut 0,01-1,77 μg g-1), nieco więcej tego pierwiastka stwierdzono we włosach kobiet (0,25 μg g-1) niż u mężczyzn (0,22 μg g-1) i statystycznie więcej we włosach mężczyzn powyżej 20 lat w porównaniu z grupą wiekową poniżej 20. roku życia (p<0,05). Istotne statystycznie dodatnie korelacje (z wyjątkiem Zn) wyznaczono między zawartością Ni oraz Cd, Pb i Cu. Włosy są tkanką dostępną w sposób łatwy i nieinwazyjny, a ze względu na znacznie wyższą zawartość Ni w porównaniu z płynami ustrojowymi stanowił dobry materiał badań, co umożliwia zmniejszenie błędów pomiarowych podczas analizy.
Źródło:
Journal of Elementology; 2009, 14, 2; 229-237
1644-2296
Pojawia się w:
Journal of Elementology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of compositional analysis and physical properties for Ni-Cr-Nb alloys using laser-induced breakdown spectroscopy
Autorzy:
Salloom, Hussein
Hamad, Tagreed
Powiązania:
https://bibliotekanauki.pl/articles/2033931.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
LIBS technique
elemental analysis
nickel alloys
hardness
Opis:
In this work, laser-induced breakdown spectroscopy (LIBS) analysis is optimized for direct estimation of elemental composition, thermal conductivity and hardness for Ni-Cr-Nb alloys. These alloys were chosen with a variable elemental content of niobium and chromium. The influence of laser energy and shot numbers on measuring line intensity was investigated. Based on the ratio between two spectral lines, calibration curves were formed to estimate the element concentration and LIBS results were confirmed with related energy-dispersive X-ray spectroscopy (EDS) data. Hardness and thermal conductivity estimation using LIBS were done by measuring the ratio between two spectral lines, plasma excitation temperature and electron density for different samples. Semi-empirical formulas correlated hardness and thermal conductivity with plasma temperature were established.
Źródło:
Optica Applicata; 2021, 51, 3; 429-444
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Plant ureases: Roles and regulation.
Autorzy:
Sirko, Agnieszka
Brodzik, Robert
Powiązania:
https://bibliotekanauki.pl/articles/1044275.pdf
Data publikacji:
2000
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
urea
plants
nickel
urease activity
nitrogen metabolism
Opis:
Both urea and urease were subjects of early scientific investigations. Urea was the first organic molecule to be synthesized and jack bean urease was the first enzyme ever to be crystallized. About 50 years later it was shown to be the first nickel metalloenzyme. Since then, nickel-dependent ureases have been isolated from many bacteria, fungi and higher plants. They have similar structures and mechanisms of catalysis. A urease apoenzyme needs to be activated. This process requires participation of several accessory proteins that incorporate nickel into the urease forming catalytic site. In this review, ureases from various organisms are briefly described and the similarities of their structures discussed. Moreover, the significance of urea recycling in plants is explained and recent literature data about the function and activation of plant ureases are presented.
Źródło:
Acta Biochimica Polonica; 2000, 47, 4; 1189-1195
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Annealing effect on nickel oxide nanoparticles synthesized by sol-gel method
Autorzy:
Kavitha, B.
Nirmala, M.
Pavithra, A.
Powiązania:
https://bibliotekanauki.pl/articles/1189956.pdf
Data publikacji:
2016
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Nickel Oxide nanoparticles
XRD
SEM
TGA-DTA
Opis:
NiO nanoparticles were synthesized by Sol-Gel method and the synthesized nanoparticles were annealed at different temperatures. The powders were investigated with x-ray diffraction, scanning electron microscopy and TGA. The structural characterization was carried out by x-ray diffraction which confirms the polycrystalline nature of the films with a cubic structure. SEM analysis of the films enabled the conclusion that the prepared films are uniform, rough, large crystals and agglomeration of particles were observed. The thermal stability of the sample was examined by TGA analysis which showed NiO nanoparticles formed between 130-720 C.
Źródło:
World Scientific News; 2016, 52; 118-129
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Process optimization of nickel extraction from hazardous waste
Autorzy:
Gharabaghi, M.
Irannajad, M.
Azadmehr, A. R.
Majid, E.
Powiązania:
https://bibliotekanauki.pl/articles/204554.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
factorial design
hazardous waste
nickel extraction
optimization
Opis:
Zinc plant residue is a hazardous waste which contains high quantity of nickel and other valuable metals. Process parameters such as reaction time, acid concentration, solid-liquid ratio, particle size, stirring speed and temperature for nickel extraction from this waste were optimized using factorial design. Main effects and their interactions were obtained by the analysis of variance ANOVA. Empirical regression model was obtained and used to predict nickel extraction with satisfactory results and to describe the relationship between the predicted results and the experiment results. The important parameters for maximizing nickel extraction were identifi ed to be a leaching time solid-liquid ratio and acid concentration. It was found that above 90% of nickel could be extracted in optimum conditions
Źródło:
Archives of Environmental Protection; 2012, 38, 3; 29-40
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of Ni(II), Pb(II) and Zn(II) on calcium alginate beads: equilibrium, kinetic and mechanism studies
Autorzy:
Nastaj, J.
Przewłocka, A.
Rajkowska-Myśliwiec, M.
Powiązania:
https://bibliotekanauki.pl/articles/778617.pdf
Data publikacji:
2016
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
biosorption
heavy metal
nickel
lead
zinc
alginate
Opis:
The biosorption process of three divalent metal ions – nickel, lead and zinc- from on calcium alginate from aqueous solution was studied, in single component systems. The biosorbent were investigated by Fourier Transform Infrared Spectroscopy. The batch mode experiments of the adsorption process were carried out as a function of pH, initial metal ions concentration, sorbent dosage and contact time. The adsorption influencing parameters for the maximum removal of metal ions were optimized. The experimental data were analyzed using the Langmuir, Freundlich, Langmuir-Freundlich, Koble-Corrigan and Redlich-Peterson models. The kinetic data of biosorption process were evaluated using pseudo-first and pseudo-second order equations. The Weber and Morris model was employed to interpret the metal ions diffusion in biosorption process.
Źródło:
Polish Journal of Chemical Technology; 2016, 18, 3; 81-87
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of heating rate and solvent on Ni-based catalysts prepared by solution combustion method for syngas methanation
Autorzy:
Zeng, Yan
Ma, Hongfang
Zhang, Haitao
Ying, Weiyong
Fang, Dingye
Powiązania:
https://bibliotekanauki.pl/articles/779390.pdf
Data publikacji:
2014
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
nickel catalysts
syngas methanation
solution combustion method
Opis:
Ni-Al2O3 catalysts prepared by solution combustion method for syngas methanation were enhanced by employing various heating rate and different solvent. The catalytic properties were tested in syngas methanation. The result indicates that both of heating rate and solvent remarkably affect Ni particle size, which is a key factor to the catalytic activity of Ni-Al2O3 catalysts for syngas methanation. Moreover, the relationship between Ni particle size and the production rate of methane per unit mass was correlated. The optimal Ni-Al2O3 catalyst prepared in ethanol at 2°C/min, achieves a maximum production rate of methane at the mean size of 20.8 nm.
Źródło:
Polish Journal of Chemical Technology; 2014, 16, 4; 95-100
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Role of sodium hexametaphosphate in flotation of a nickel ore
Autorzy:
Feng, B.
Wang, P.
Lu, Y.
Feng, Q.
Powiązania:
https://bibliotekanauki.pl/articles/109887.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
nickel ore
lizardite
flotation
concentration process
pentlandite
Opis:
In this work, a role of sodium hexametaphosphate (SHMP) in the flotation performance of a nickel ore was studied and mechanism was discussed in detail. The results showed that the presence of lizardite interferes with the flotation performance of pentlandite. The adsorption of SHMP at the lizardite/solution interface and the removal of magnesium ions from lizardite surface overcompensated the positive charge on the lizardite particle, and made its zeta potential negative. The interaction between lizardite and pentlandite changed from attractive to repulsive in the presence of SHMP. Thus, the addition of SHMP made the mixed sample of pentlandite and lizardite more dispersed, and significantly reduced the adverse effect of lizardite on the flotation of pentlandite. However, when the content of lizardite in the mixed ore was increased, the effect of SHMP weakened. Therefore, in flotation of a nickel ore containing a large amount of lizardite (46% w/w), SHMP usage is not suitable at the roughing stage due to the fact that lizardite in the pulp will consume most of the SHMP, and hence the removal of lizardite slimes from pentlandite surface become impossible. Based upon the results, SHMP usage is found to be suitable at the cleaning stage to improve the grade of concentrate.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 170-181
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetic studies on sorption of ni(ii) and cd(ii) from chloride solutions using selected acidic cation exchangers
Autorzy:
Otrembska, P.
Gega, J.
Powiązania:
https://bibliotekanauki.pl/articles/110403.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
sorption
nickel
cadmium
adsorption kinetics
adsorption isotherm
Opis:
Sorption of nickel(II) and cadmium(II) ions from chloride solutions was tested. Three different strongly acidic cation exchangers, i.e. Lewatit MonoPlus SP 112, Amberlite 200C and Amberlyst 15, were used. Effects of phase contact time, pH and initial concentration of metal ions on equilibrium and kinetics of sorption by batch methods were studied. It was showed that sorption of Ni(II) and Cd(II) could be described by the pseudo-second order equation. Experimental results data were analyzed using the Langmuir and Freundlich isotherms. Sorption of Ni(II) and Cd(II) onto investigated resins followed the Langmuir isotherm.
Źródło:
Physicochemical Problems of Mineral Processing; 2013, 49, 1; 301-312
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Atmospheric pressure leaching of nickel from a low-grade nickel-bearing ore
Autorzy:
Javanshir, S.
Mofrad, Z. H.
Azargoon, A.
Powiązania:
https://bibliotekanauki.pl/articles/110534.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
leaching
kinetics
calcination
laterite ore
nickel recovery
Opis:
This study focused on the extraction of nickel from a low-grade lateritic ore. The characterization of representative samples was done by X-ray diffraction (XRD), X-ray fluorescence (XRF), and microscopic mineralogical studies. Nickel was uniformly distributed in iron (hydr)oxide minerals. The pre-concentration of nickel was attempted by magnetic separation, but was unsuccessful. The effect of the type of lixiviant, acid concentration, S/L ratio, time, and temperature were investigated in the atmospheric leaching process. Based on the experimental data, optimum conditions for the maximum recovery of nickel were determined under the following conditions: 5 M H2SO4, 25% (w/v), 90 ºC, and two hours. Pre-calcination, for increasing nickel extraction by converting goethite to hematite, was carried out on raw ores at different times (30-180 minutes) and temperatures (180-540 ºC). Recovery was found increasing from 69 to 95% under the same conditions. Kinetic studies were conducted by fitting the data with Shrinking Core (SC) models. The study determined, from the estimate of activation energy, that the rate of reaction controlled by chemical reaction.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 890-900
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electro-Kinetic Remediation of Nickel from Contaminated Soil Using Bio remedies Banana Peels and Surfactant-Enhanced
Autorzy:
Hawal, Laith Hamdan
Al-Zubaidi, Lubna
Allah, Serror Atta
Powiązania:
https://bibliotekanauki.pl/articles/1838411.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
electrokinetic
nickel
soil
removal efficiency
AOT
BP
Opis:
Pollution of the soil by different types of heavy metals is one of the most important problems of the environment. The present study used an electro-kinetic remediation, which is one of the important advanced techniques for the removal nickel from contaminated sandy soil. The study includes many experiments with different pH electrode purging solutions (distilled water at pH of 3, 5 and 7). Anionic surfactant (sodium dioctyl sulfosuccinate, AOT) was used for washing soil as surfactant-enhanced remediation. Bio remedies banana peels (BP) were utilized as eco-friendly, low cost and adsorbent materials to avoid reverse osmosis that effects on the removal process. The results indicated that the greatest removal efficiency (65.2%) was achieved at the pH of purging solution (3) in comparison with pH of (5 and 7). This means that when the pH of the purging solution decreases, the removal efficiency increases. Using AOT as a soil-washing solution increased nickel dissolution and desorption from surface of the soil. Then, the AOT micelles containing nickel easily migrated to the cathode chamber by flow of the electro osmotic; thus, the removal efficiency increased (74.8%). In conclusion, the use of AOT is effective in enhancing nickel removal through the electro kinetic remediation. Bio remedies using banana peels is considered as a successful adsorbent material to avoid the reverse osmosis flow, this will give a new thought for the application these products as adsorption medium.
Źródło:
Journal of Ecological Engineering; 2021, 22, 5; 214-220
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fractionation of Selected Heavy Metals (Zn, Ni, Cu) in Municipal Sewage Sludges from Podlasie Province
Autorzy:
Łukowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/124883.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
zinc
nickel
copper
metal fraction
sewage sludge
Opis:
In the samples of fresh dehydrated sewage sludges from municipal treatment plants in Grajewo, Bielsk Podlaski, Sokółka, Dąbrowa Białostocka, Knyszyn, Mońki, Augustów, Suwałki, Sejny and Suchowola the following determinations were made: pH, pseudo-total content of Zn, Ni and Cu, organic matter and dry mass. The contents of the above-mentioned elements in fractions were evaluated using modified BCR method (four fractions: F1-acid soluble and exchangeable, F2-reducible, F3-oxidizable, F4-residual). The zinc content (mean values) in particular fractions can be arranged quantitatively in a sequence: F3 (60.8%) > F2 (20.0%) > F4 (19.9%) > F1 (3.9%), in the case of nickel: F3 ( 48.6%) > F2 (25.2%) > F4 (25.1%) > F1 (5.6%) and in the case of copper: F4 (66.3%) > F3 (35.3%) > F1 (4.2%) > F2 (3.0%). Cumulative content of zinc in mobile fractions (F1+F2+F3) ranged from 76.0 to 93.3%; for nickel from 56.3 to 89.6% and for copper from 28.8 to 53.3% of pseudo-total content.
Źródło:
Journal of Ecological Engineering; 2017, 18, 3; 133-139
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zinc and copper fractions in soil contaminated with nickel
Frakcje cynku i miedzi w glebie zanieczyszczonej niklem
Autorzy:
Kuziemska, B.
Wieremiej, W.
Jaremko, D.
Powiązania:
https://bibliotekanauki.pl/articles/905684.pdf
Data publikacji:
2015
Wydawca:
Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:
zinc fraction
copper fraction
soil contamination
nickel
Opis:
Soil subject to a three-year pot experiment was analyzed, in which the following factors were considered: (i) soil contamination with nickel (0, 75, 150 and 225 mg Ni kg⁻¹ of soil); (ii) liming (0 Ca and Ca in a dose calculated according to 1 Hh of soil); (iii) organic fertilization (with no organic fertilization, rye straw and brown coal from the Turów coalmine). The test plant was orchardgrass, which was harvested in the amount of four cuts each year of the experiment. The copper and zinc fractions were assessed using the BCR method, whereas the pH was calculated using the potentiometer method. The total content of copper and zinc in the analyzed soil did not exceed the values of the geochemical background of the soils of Poland. No impact of the varied content of nickel in the soil on the total content and distribution of Cu and Zn was found in the investigated fractions. Liming caused an increase in the total content of zinc in the analyzed soil and a decrease in the content of Cu and Zn in the F1 fraction. The straw and brown coal caused an increase in the content of both metals in the soil in the F3 fraction.
Analizowano glebę po trzyletnim doświadczeniu wazonowym, w którym uwzględniono następujące czynniki: 1. zanieczyszczenie gleby niklem (0,75, 150 i 225 mg Ni kg⁻¹ gleby); 2. wapnowanie (0 Ca i Ca w dawce wyliczonej wg 1 Hh gleby); 3. nawożenie organiczne (bez nawożenia organicznego, słoma żytnia i węgiel brunatny pochodzący z kopalni w Turowie). Rośliną testowa była kupkówka pospolita, której w każdym roku eksperymentu zebrano po cztery pokosy. Frakcje miedzi i cynku oznaczono metodą BCR, a pH metodą potencjometryczną. Ogólna zawartość miedzi i cynku w analizowanej glebie nie przekraczała wartości tła geochemicznego gleb Polski. Nie wykazano wpływu zróżnicowanej ilości niklu w glebie na zawartość ogólną i rozmieszczenie Cu i Zn w wydzielonych frakcjach. Wapnowanie spowodowało zwiększenie ilości ogólnej cynku w analizowanej glebie oraz zmniejszenie udziału Cu i Zn we frakcji F₁. Słoma i węgiel brunatny spowodowały zwiększenie w glebie ilości obu metali oraz ich udziału we frakcji F₃.
Źródło:
Polish Journal of Soil Science; 2015, 48, 1
0079-2985
Pojawia się w:
Polish Journal of Soil Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sorption of nickel in soils of an area affected by the metal industry
Sorpcja niklu w glebach w strefie oddziaływania przemysłu metalurgicznego
Autorzy:
Wasylewicz, R.
Kostecki, J.
Greinert, A.
Walczak, B.
Drab, M.
Powiązania:
https://bibliotekanauki.pl/articles/905736.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:
nickel content
sorption
soil
industrial area
metallurgy
Opis:
The analysed area was used for industrial activity for over 130 years. During that time many pollutants (including heavy metals) have been emitted by industrial plants and infiltrated into the soil. This article presents the properties of the soil from industrial sites located in Zielona Góra and analysis of its physical and chemical characteristics.
Źródło:
Polish Journal of Soil Science; 2014, 47, 2
0079-2985
Pojawia się w:
Polish Journal of Soil Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal efficiency of the Trudisk 4002
Autorzy:
Jędrusik, Agnieszka
Opiekun, Zenon
Lenik, Magdalena
Powiązania:
https://bibliotekanauki.pl/articles/2014093.pdf
Data publikacji:
2021
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
welding
Inconel 718 nickel alloy
thermal parameters
Opis:
The article presents the test results of thermal efficiency of the welded thin heatresistant sheets of Inconel 718 nickel alloys using the Trudisk 4002 instalated in the TruLaser 5020 equipment. The thermal efficiency of the laser was determined using a water-cooled calorimeter. Thin sheet metal samples 0,7 and 0,9 mm, installed in the calorimeter were subjected to a laser beam with the power of 400 to 700 W, moved along the line at a constant speed Vs = 25 mm/s. The thermal efficiency was calculated as the quotient of the heat absorber by the welded sheets, determined calorimetrically, to the total amount of heat generated by the laser. The results show that thermal efficiency depends non-linearly on the laser power. The thickness of the plates to be welded does not affect efficiency. As the power of the laser increases from 400 to 600 W, thermal efficiency decreases three times from 21% to 7%, and with the increase of its power to 700 W, thermal efficiency increases to 28%.
Źródło:
Physics for Economy; 2021, 4; 29-34
2544-7742
2544-7750
Pojawia się w:
Physics for Economy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Trace metals in soils and several Brassicaceae plant species from serpentine sites of Serbia
Autorzy:
Tomović, G. M.
Mihailović, N. L.
Tumi, A. F.
Gajić, B. A.
Mišljenović, T. D.
Niketić, M. S.
Powiązania:
https://bibliotekanauki.pl/articles/205251.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Brassicaceae
nickel
trace metal
serpentine soil
Serbia
Opis:
Serpentine soils from 16 sample points in Serbia as well as the roots and shoots of eight Brassicaceae family species: Aethionema saxatile, Alyssum montanum, Alyssum repens, Cardamine plumieri, Erysimum linariifolium, Erysimum carniolicum, Isatis tinctoria, Rorippa lippizensis, were analyzed with regard to their concentrations of P, K, Fe, Ca, Mg, Ni, Zn, Mn, Cu, Cr, Cd, and Pb. Most of the soil samples were typical of ultramafi c sites with low concentrations of P, K and Ca and high concentrations of Mg, Fe, Ni and Zn. Ca/Mg ratio was <1 in most soil samples and Brassicaceae plants. Only in A. montanum, A. repens, E. linariifolium and R. lippizensis was the Ca/Mg ratio >1. The levels of P, K, Fe and Zn were high, Mn and Cu occurred in low amounts, whereas Cr, Cd, Co and Pb were only traceable. In the roots and shoots of A. montanum and A. repens the measured concentrations of Ni were 657 mg kg-1 and 676 mg kg-1 respectively, which is the fi rst instance that such high concentrations of Ni were detected in these two species.
Źródło:
Archives of Environmental Protection; 2013, 39, 4; 29-49
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Monitoring vital functions of A-375 melanoma cell cultures via thin-film nickel capacitors
Autorzy:
Wilczyńska, Aleksandra
Kociubiński, Andrzej
Zarzeczny, Dawid
Szypulski, Maciej
Pigoń, Dominika
Małecka-Massalska, Teresa
Prendecka-Wróbel, Monika
Powiązania:
https://bibliotekanauki.pl/articles/1844972.pdf
Data publikacji:
2020
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
ECIS
nickel
thin layers
melanoma
magnetron sputtering
Opis:
This article deals in the constantly developing branch of microelectronic devices used in various fields of medicine, i.e. diagnostics and treatment of previously incurable human diseases. A method for assessing and monitoring the vital functions of living cells by measuring cellular impedance in real-time using the ECIS® system and a commercial culture substrate is presented. The goal was to develop a substrate significantly less expensive than a commercial substrate that would be suitable for multiple uses and compatible with the ECIS® measurement station. Moreover, thanks to the use of a material with electrochemical properties other than the biocompatible material (gold or platinum) it is possible to observe the cells behavior with regard to the toxic agent. For this purpose, a culture substrate with nickel comb capacitors was used. To make the electrodes, a thin metal layer was sputtered on polycarbonate plates in the magnetron sputtering process. Prior to the next stages, technological masks were designed so as to fit in the ECIS® measuring station. Subsequently, the microelectronic processes of photolithography and etching the metal layer were performed. Finally, the wells were glued onto the culture medium with a biocompatible adhesive. The completed substrates were transferred to the Department of Human Physiology, Medical University of Lublin, for the culture test on A-375 human melanoma cells. The results of the experiment determined the usefulness of the device for monitoring cell culture vital functions by means of impedance measurement.
Źródło:
Engineering of Biomaterials; 2020, 23, 157; 10-14
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of cutting tool geometry on the dynamic load of system in the machining process of nickel Alloy 625
Autorzy:
Hajnyš, J.
Zlámal, T.
Petrů, J.
Pagáč, M.
Rudawska, A.
Powiązania:
https://bibliotekanauki.pl/articles/102943.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
nickel Alloy 625
cutting geometry
cutting force
Opis:
The article is focussed on comparing and determining the impact of the cutting geometry of the cutting tool due to dynamic load on system and microgeometry machined surface. For longitudinal turning nickel alloy Alloy 625 (W. Nr. 2.4856) rounded indexable cutting insert was used (RCMT 10T3M0 – F2) and its equivalent squared indexable cutting insert (SNMG 120412 – MR3) coated with fine-grained PVD (Ti, Al) N + TiN. Experimental testing of nickel Alloy 625 was under predetermined cutting conditions. In the selected depth of the removed material of 0.5 mm and 1.5 mm was measured in the course of machining the size of the individual components of cutting forces.
Źródło:
Advances in Science and Technology. Research Journal; 2016, 10, 32; 24-31
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selective nickel-iron separation from atmospheric leach liquor of a lateritic nickel ore using the para-goethite method
Autorzy:
Basturkcu, H.
Acarkan, N.
Powiązania:
https://bibliotekanauki.pl/articles/110361.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
iron precipitation
nickel loss
para-goethite method
Opis:
The presence of iron in pregnant leach solutions (PLS) is a common problem, and is generally removed using jarosite, goethite, hematite or para-goethite precipitation methods. Although these methods are successfully applied, significant amounts of nickel can be lost. In this study, iron precipitation was performed on a PLS obtained from agitation leaching of a lateritic nickel ore under atmospheric conditions using the para-goethite method. The PLS contained 2.62 g/dm3 Ni, 54.28 g/dm3 Fe and 0.14 g/dm3 Co. During the precipitation tests the effect of pH, time, temperature, and metal concentration were investigated. The influence of the key points, temperature and metal concentration, on nickel loss was explained in reference to SEM and XRD analyses. Ultimately, selective nickel and iron separation was achieved with complete iron precipitation and only 1.2% Ni loss.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 1; 212-226
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of characterization methods for adherent anode slimes in copper electrorefining
Autorzy:
Kiviluoma, M.
Aaltonen, M.
Aromaa, J.
Lundstrom, M.
Forsen, O.
Powiązania:
https://bibliotekanauki.pl/articles/110440.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
anode
slime
copper
electrorefining
nickel
lead
arsenic
Opis:
Adherent anode slimes can cause anode passivation in copper electrorefining and lower the efficiency of copper electrorefining. Declining concentrate grades cause larger impurity levels in anodes, thus creating larger quantities of slimes in the refining process. In order to investigate the characterization methods for adherent anode slimes in copper electrorefining, experiments were conducted for the Boliden Harjavalta Pori refinery material. Methods such as particle size determination, chemical (ICP) analysis, settling rate determination, XRD, SEM-SE, SEM-BSE and SEM-EDS were applied. In addition, adherent anode slime samples were compared to optical micrograph and SEM-BSE images of respective anode copper samples. It was shown that SEM-EDS and SEM-BSE provided precise information about phases formed during electrorefining. The settling rate and particle size had a correlation only with a copper content of anode slime. The main phases in the anode slime were copper and lead sulphates as well as copper-silver selenides. NiO was shown to be the major Ni-bearing phase in the adherent slime. Nickel, tellurium and lead had the strongest, whereas arsenic, selenium and antimony had the weakest tendency to report to the anode slime.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 1; 295-302
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cerium-Promoted Nickel /Alumina Catalyst for Producer Gas Reforming and Tar Conversion
Autorzy:
Aljbour, Salah H.
Kawamoto, Katsuya
Powiązania:
https://bibliotekanauki.pl/articles/2105271.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
cerium
nickel
tar
naphthalene
catalyst
gasification
reforming
Opis:
The catalytic conversion of a model tar compound, namely: naphthalene contained in a simulated producer gas from wood gasification process was investigated. The sol-gel approach was used to create a mesoporous Cepromoted Ni/alumina catalyst with high surface area. A surface area of 333 m2g was achieved by calcination of the mesoporous catalyst (17 wt% Ni and 2.8 wt% Ce) under air conditions at 1123 K. The catalysts were characterized using the N2 adsorption-desorption, XRD, and SEM techniques, and their promotion effect on producer gas reforming and tar removal was studied under dry, steam, and partial oxidation conditions. The Ni-based catalysts effectively converted naphthalene and increased the proportion of H2 and CO in the reformed gas. Incorporating Ce into the catalyst increased the proportion of H2 and CO in the reformed gas, while lowering the amount of CH4 and CO2. In the absence of oxygen, catalytic reforming of the producer gas resulted in 79.6% naphthalene conversion, whereas catalytic partial oxidation conditions resulted in 99.1% naphthalene conversion.
Źródło:
Journal of Ecological Engineering; 2022, 23, 6; 58--66
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biosorption of nickel (II) and zinc (II) from aqueous solutions by the biomass of yeast Yarrowia lipolytica
Autorzy:
Wierzba, S.
Powiązania:
https://bibliotekanauki.pl/articles/778166.pdf
Data publikacji:
2017
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
biosorption
adsorption isotherms
zinc
nickel
Yarrowia lipolytica
Opis:
This study examined the biosorption process of Ni(II) and Zn(II) from an aqueous solution by dead biomass of Yarrowia lipolytica. Optimum biosorption conditions were determined as a function of pH, biomass dosage, contact time, and temperature. The biosorbent was characterized by FTIR, which indicated the participation of hydroxyl, carboxyl, amide and amine groups in the process of binding the metal ions. The results showed that the biosorption processes of both metal ions closely followed pseudo-second order kinetics. The equilibrium data of Ni(II) and Zn(II) ions at 20, 30 and 40°C fitted the Langmuir and Freundlich isotherm models. Langmuir isotherm provided a better fit to the equilibrium data, with a maximum biosorption capacity of the Y. lipolytica biomass for Ni(II) and Zn(II) of 30.12 and 44.44 mg/g respectively. The calculated thermodynamic parameters demonstrated that the biosorption of Ni(II) and Zn(II) ions onto the Y. lipolytica was feasible, spontaneous and endothermic.
Źródło:
Polish Journal of Chemical Technology; 2017, 19, 1; 1-10
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of Ni2+ from Aqueous Solutions by Adsorption Onto Magnetic Multiwalled Carbon Nanotube Nanocomposite
Autorzy:
Konicki, W.
Pełech, P.
Mijowska, E.
Powiązania:
https://bibliotekanauki.pl/articles/778869.pdf
Data publikacji:
2014
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
magnetic nanocomposite
multiwalled carbon nanotubes
nickel
adsorption
Opis:
The removal of Ni2+ from aqueous solution by magnetic multiwalled carbon nanotube nanocomposite (MMWCNTs-C) was investigated. MMWCNTs-C was characterized by X-ray Diffraction method (XRD), High-Resolution Transmission Electron Microscopy (HRTEM), surface area (BET), and Fourier Transform-Infrared Spectroscopy (FTIR). The effects of initial concentration, contact time, solution pH, and temperature on the Ni2+ adsorption onto MMWCNTs-C were studied. The Langmuir and Freundlich isotherm models were applied to fit the adsorption data. The results showed that the adsorption isotherm data were fitted well to the Langmuir isotherm model with the maximum monolayer adsorption capacity of 2.11 mg g–1. The adsorption kinetics was best described by the pseudo-second-order model. The thermodynamic parameters, such as ΔHo, ΔGo and ΔSo, were also determined and evaluated. The adsorption of Ni2+ is generally spontaneous and thermodynamically favorable. The values of ΔHo and ΔGo indicate that the adsorption of Ni2+ onto MMWCNTs-C was a physisorption process.
Źródło:
Polish Journal of Chemical Technology; 2014, 16, 2; 87-94
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nikiel i jego związki – w przeliczeniu na Ni, z wyłączeniem tetrakarbonylku niklu Dokumentacja proponowanych dopuszczalnych wielkości narażenia zawodowego
Nickel and its compounds – as Ni, excluding nickel tetracarbonyl Documentation of proposed values of occupational exposure limits (OELs)
Autorzy:
Daragó, Adam
Sapota, Andrzej
Kilanowicz, Anna
Powiązania:
https://bibliotekanauki.pl/articles/23352092.pdf
Data publikacji:
2023
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
nikiel
związki niklu
toksyczność
substancje rakotwórcze
narażenie zawodowe
NDS
nickel
nickel compounds
toxicity
carcinogens
occupational exposure
MAC-TWA
Opis:
Nikiel (Ni) jest metalem o charakterystycznym połysku. Znalazł zastosowanie do produkcji stopów, w galwanizacji, produkcji baterii, protez, pigmentów, w przemyśle ceramicznym i komputerowym. Skutki narażenia ludzi na nikiel i jego związki w warunkach zawodowych obejmują głównie wpływ na układ oddechowy (w tym ryzyko wystąpienia chorób nowotworowych płuc i jamy nosowej, zwłóknienie i pylicę płuc, astmę oskrzelową) oraz działanie uczulające na skórę i układ oddechowy. Szkodliwy wpływ niklu i jego związków na układ oddechowy potwierdzają wyniki badań doświadczalnych na zwierzętach. Długotrwałe narażenie na nikiel i jego związki powodowało również osłabienie układu odpornościowego oraz skutki nefro- i hepatotoksyczne. Rozpuszczalne sole niklu nie wywoływały mutacji w komórkach bakterii, ale genotoksyczność niklu i jego związków potwierdzono w badaniach z użyciem komórek eukariotycznych ssaków, przy czym jedynie przy wysokich stężeniach niklu. Nikiel i jego związki mogą przenikać przez łożysko oraz do mleka matki. Działanie rakotwórcze na układ oddechowy po narażeniu inhalacyjnym było także wykazane w badaniach na szczurach, głównie dla siarczku niklu oraz tlenku niklu. Zaproponowano przyjęcie wartości wiążących dla związków niklu ujętych w dyrektywie Parlamentu Europejskiego i Rady (UE) 2022/431 z dnia 9 marca 2022 r., zmieniającej dyrektywę 2004/37/WE, jako wartości NDS: 0,01 mg Ni/m³ (frakcja respirabilna), 0,05 mg Ni/m³ (frakcja wdychalna). Zaproponowano przyjęcie do 17 stycznia 2025 r. włącznie okresu przejściowego, podczas którego obowiązywać będzie wartość NDS wynosząca 0,1 mg/m³ w odniesieniu do frakcji wdychalnej związków niklu. Proponuje się oznakować jako substancje o działaniu: uczulającym, rakotwórczym kat. 1A – związki niklu (Carc. 1A), rakotwórczym kat. 2 – nikiel metaliczny (Carc. 2), szkodliwym na rozrodczość.
Nickel (Ni) is a metal with a distinctive luster, and has found applications in alloying, electroplating, battery manufacturing, prosthetics, pigments, ceramics and computer industries. The effects of human exposure to nickel and its compounds under occupational conditions mainly include effects on the respiratory system (including the risk of cancer of the lungs and nasal cavity, fibrosis and pneumoconiosis, bronchial asthma) and sensitization of the skin and respiratory system. The harmful effects of nickel and its compounds on the respiratory system are confirmed by the results of experimental studies on animals. Long-term exposure to nickel and its compounds also caused immune system impairment and nephro- and hepatotoxic effects. Soluble nickel salts did not induce mutations in bacterial cells, but the genotoxicity of nickel and its compounds has been confirmed in studies using mammalian eukaryotic cells, with only high nickel concentrations. Nickel and its compounds can cross the placenta and into breast milk. Respiratory carcinogenic effects after inhalation exposure have also been demonstrated in rat studies, mainly in regard of nickel sulfide and nickel oxide. It has been proposed to adopt the binding values for nickel compounds included in Directive (EU) 2022/431 of the European Parliament and of the Council of March 9, 2022, amending Directive 2004/37/EC, as the NDS values: 0.01 mg Ni/m³ (respirable fraction), 0.05 mg Ni/m³ (inhalable fraction). It is proposed to adopt a transitional period up to and including January 17, 2025, during which an NDS value of 0.1 mg/m³ will apply to the inhalable fraction of nickel compounds. It is proposed to label as substances with the following effects: sensitizer, carcinogen cat. 1A – nickel compounds, Carc. 2 – carcinogenic cat. 2 – nickel metal, reproductive toxicity.
Źródło:
Podstawy i Metody Oceny Środowiska Pracy; 2023, 2 (116); 29--104
1231-868X
Pojawia się w:
Podstawy i Metody Oceny Środowiska Pracy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of increasing nickel content in soil on Miscanthus × giganteus Greef and Deu. Yielding and on the content of nickel in above-ground biomass
Wpływ wzrastającej zawartości niklu w glebie na plonowanie Miscanthus x giganteus Greef i Deu. i zawartość niklu w nadziemnej biomasie
Autorzy:
Bosiacki, M.
Powiązania:
https://bibliotekanauki.pl/articles/204626.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
phytoremediation
continuous phytoextraction
nickel concentration index
nickel contamination
ornamental plants
fitoremediacja
fitoekstrakcja
indeks stężenie niklu
zanieczyszczenie gleby
rośliny ozdobne
Opis:
The aim of the research conducted in a 2-year pot experiment in an unheated plastic tunnel was to determine suitability of Miscanthus × giganteus for phytoextraction of nickel from soil as well as to assess tolerance of this species on increasing concentrations of this metal in soil. Pots were filled with mineral soil (sand) and a mixture of soil with high-moor peat and three levels of nickel were introduced, i.e. 75 mg dm-3, 150 mg dm-3 and 600 mg dm-3 and the control combinations used substrates without the addition of nickel. Nickel was introduced only in the first year of the experiment in the form of nickel sulfate (NiSO4 · 6H2O). Miscanthus × giganteus accumulated a considerable amount of nickel in biomass. Miscanthus × giganteus growing in contaminated mineral soil turned out to be a species tolerant to high nickel concentrations.
Celem badań prowadzonych w dwuletnim doświadczeniu wazonowym w nieogrzewanym tunelu foliowym, było określenie przydatności Miscanthus × giganteus do fitoekstrakcji niklu z gleb, jak również ocena tolerancji tego gatunku na wzrastające stężenia tego metalu w glebie. Wazony wypełniono glebą mineralną (piasek słabo gliniasty) oraz mieszaniną gleby z torfem wysokim i wprowadzono do nich trzy poziomy zawartości niklu: 75 mg·dm-3 , 150 mg·dm-3 oraz 600 mg·dm-3 a jako warianty kontrolne zastosowano podłoża bez jego dodatku. Nikiel został wprowadzony tylko w pierwszym roku badań, w postaci siarczanu niklu (NiSO4·6H2O). Miscanthus × giganteus kumuluje znaczącą ilość niklu w biomasie. Miscanthus × giganteus rosnący w zanieczyszczonej glebie mineralnej okazał się gatunkiem tolerancyjnym na wysokie stężenia niklu.
Źródło:
Archives of Environmental Protection; 2015, 41, 1; 72-79
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of the efficiency factors of the absorption and scattering of nickel nanoparticles
Wyznaczanie współczynników efektywności absorpcji i rozpraszania nanocząstek niklu
Autorzy:
Machulianskyi, O.
Babych, B.
Machulianskyi, V.
Powiązania:
https://bibliotekanauki.pl/articles/408809.pdf
Data publikacji:
2018
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
nickel nanoparticles
optical parameters
nanocząstki niklu
parametry optyczne
Opis:
In the dipole approximation for the spherical nickel nanoparticle with a diameter D0 = 2.5 ÷ 7 nm in the spectral range from 0.2 to 1.1 μm at T = 300 K, efficiency factors of the absorption Κa and scattering Κs were determined with the help of the experimental values of the complex specific electrical polarizability. Numerical calculations of the Κa and Κs of the nickel nanoparticles were carried out in accordance with the theories of classical and quantum dimensional effects. It was shown that it is impossible to explain the photoabsorption of nickel nanoparticles by the intraband (Drude) type of absorption even taking into account classical or quantum dimensional effects.
Na podstawie wartości eksperymentalnych zespolonej właściwej polaryzacji elektrycznej zostały wyznaczone współczynniki efektywności absorpcji Κa i rozpraszania Κs w przybliżeniu dipolowym dla sferycznej nanocząstki niklu o średnicy D0 = 2,5 ÷ 7 nm w zakresie spektralnym od 0,2 do 1,1 μm przy T = 300 K. Wykonano obliczenia numeryczne Κa i Κs nanocząstek niklu na podstawie teorii efektów klasycznego i kwantowego. Wykazano, że fotoabsorpcji nanocząstek niklu nie można wyjaśnić absorpcją wewnątrzstrefową (Drudowską), nawet biorąc pod uwagę efekty klasyczne lub kwantowe.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2018, 8, 1; 4-7
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The contents of nickel in perennial ryegrass (Lolium perenne L.) as affected by application of multicomponent fertilizers
Autorzy:
Draszawka-Bołzan, B.
Powiązania:
https://bibliotekanauki.pl/articles/412583.pdf
Data publikacji:
2013
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
heavy metals
soil
mineral fertilizer
nickel
perennial ryegrass
Opis:
Urbanization is the cause of many changes which is taking place in the environment, including those found in the catchment Three multicomponent fertilizers were applied: Polifoska 8, Polifoska 16 and Polimag 306, at the rates of 0.5; 1.0; and 1.5 g N per pot. The total forms of nickel were determined in dry matter of perennial ryegrass with the use of ASA method. The contents of these elements were higher in the fertilized variants as compared to the control. No significant differences were found among the contents of investigated elements compared in plants treated with different multicomponent fertilizers. The increasing rates of nitrogen decreased soil pH and, thereby, enhanced the availability and concentration of heavy metals in perennial ryegrass. A pot experiment on an acid brown soil was conducted in 1998-2001.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2013, 7, 2; 139-143
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Flotation behavior of nickel sulfide ore in a cyclonic flotation column
Autorzy:
Deng, L.
Li, G.
Cao, Y.
Ma, Z.
Powiązania:
https://bibliotekanauki.pl/articles/109906.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cyclonic flotation column
floatability
flotation
nickel sulfide ore
Opis:
This study aimed to show the flotation behavior of a nickel sulfide ore in a cyclonic flotation column. The flotation experiments were carried out using a sample of nickel sulfide ore obtained from a mineral processing plant of China. Representative samples collected from the feed, concentrate, tailing, and circulation middling were sieved using a cyclonic particle analyzer to collect different size fractions for analysis. The function of the column cyclonic zone of was evaluated by comparing the quality of tailing and circulation middling. The flotation results showed that the concentrate with Ni grade of 1.78% and recovery of 65.56% was obtained under given test conditions. The content of main sulfide minerals and coarse particles in the circulation middling was higher than that in the tailing. The results indicated that, unlike conventional cyclone classification, separation achieved in the cyclonic zone of the column was not dependent on the particle size and density. Sulfide minerals with good floatability were easily captured by bubbles and moved toward the center of the column, even if these particles were coarser and heavier.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 770-780
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of chemical and biogenic leaching on surface area and particle size of laterite ore
Autorzy:
Pawlowska, A.
Sadowski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/110297.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
nickel
laterite ores
leaching
citric acid
Aspergillus niger
Opis:
Currently there is a decline in the world’s nickel sulfide deposits, which are the main source of this metal. Due to the fact, that more than 70% of nickel reserves are in the form of oxide ores, more attention is nowadays paid on laterites. Leaching processes using different organic acids are widely described in the literature, but there is a lack of works linking influence of leaching process with the surface area and particle size distribution. Therefore, the main aim of this study was to examine how citric acid produced by microorganisms and citric acid added as chemical affected the specific surface and particle size distribution of mineral particles. The laterite ore was obtained from Szklary deposit, Poland. This study also compared the effect of chemical citric acid and filtrate after cultivation of Aspergillus niger on nickel extraction. It was observed that higher nickel recovery correspond to higher surface area of particles. The highest yield of nickel extraction was observed for a citric acid concentration of 1 mol/dm3 (67%). The specific surface area after leaching was 159 m2/g. An analysis of particle size distribution showed increase in the median particle size of particles after leaching with citric acid. It may suggest that dissolution of Polish laterites follows a shrinking core-shrinking particle model.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 869-877
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electrochemical deposition of cobalt-nickel coatings in a constant magnetic field
Autorzy:
Miękoś, Ewa
Klepka, Tomasz
Zieliński, Marek
Sroczyński, Dariusz
Powiązania:
https://bibliotekanauki.pl/articles/2146891.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cobalt-nickel coatings
constant magnetic field
electrochemical deposition
Opis:
The electrochemical deposition of Co-Ni coatings on gold-disc electrode with and without of constant magnetic field (CMF) has been investigated using cyclic voltammetry (CV), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). The EDX results showed that CMF applied during the electrodeposition of Co-Ni coatings affects their composition. In particular, an increase by 17% in the content of cobalt in coating, i.e. the main component, with a simultaneous decrease of nickel content has been observed when magnetic induction B of 1200 mT was applied compare to this without of CMF. Moreover, it has been supposed that the increase of internal stresses in electrodeposited Co-Ni coatings under CMF can be attributed to a decrease in their thickness.
Źródło:
Physicochemical Problems of Mineral Processing; 2022, 58, 2 (Special issue - selected papers conference: Physicochemistry of interfaces - instrumental methods); art. no. 146066
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Alloying of Cupronickel Alloy with Aluminum using Tungsten Inert Gas Process
Autorzy:
Koeini, Fatemeh
Sohi, Mahmoud Heydarzadeh
Pirayesh, Parham
Powiązania:
https://bibliotekanauki.pl/articles/2203735.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
copper-nickel
surface alloying
surface melting
aluminum
TIG
Opis:
Surface melting and alloying of Copper-Nickel (Cupronickel) alloy by preplacing aluminum powder and using tungsten inert gas process (TIG) in shielded atmosphere of argon gas were investigated. Surface melting resulted in the formation of a fairly porous dendritic microstructure. Surface alloying with aluminum resulted in the formation of Al2Cu and Al4Cu9 intermetallic compounds along with Cu-rich matrix and unstable martensitic structure. Surface melting reduced the hardness from 140 HV0.1 (substrate) to 70 HV0.1, mainly due to the loss of cold work effect of the initial substrate. On the other hand, surface alloyed zone showed a hardness of 300 HV0.1, mainly due to the formation of intermetallic compound. Tafel polarization results indicated improvement in corrosion resistance of cupronickel alloy after surface melting and alloying.
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 1; 161--170
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Radionuclides of iron (55Fe), nickel (63Ni),polonium (210Po), uranium (234U, 235U, 238U) and plutonium (238Pu, 239+240Pu, 241Pu) in Poland and Baltic Sea environment
Autorzy:
Skwarzec, B.
Strumińska, D.
Boryło, A.
Powiązania:
https://bibliotekanauki.pl/articles/148606.pdf
Data publikacji:
2006
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
radionuclides
iron
nickel
polonium
uranium
plutonium
Baltic Sea
Opis:
The paper presents the results of determination of natural [polonium (210Po), uranium (234U, 235U, 238U)] and artificial radionuclides [iron (55Fe), nickel (63Ni), and plutonium (238Pu, 239+240Pu, 241Pu)] in Poland and the southern Baltic Sea ecosystem as well as the recognition of their accumulation process in the trophic chain. All presented results is a summary of long lasting studies realized by the present authors. Results of this study indicated that the principal sources of 55Fe and 63Ni in the Baltic Sea environment is the release from Swedish nuclear power plants. Investigation on the polonium 210Po and plutonium 238Pu, 239+240Pu and 241Pu concentration in Baltic and land biota revealed that these radionuclides are strongly accumulated by some species. Moreover, it was found that fish, mushrooms, cigarettes constitutes important sources of 210Po for people. The Baltic Sea algae, benthic animals and fish concentrate uranium only to a small degree. In Baltic sediments, the concentration of uranium increases with core depth and it is connected with the diffusion of 234U, 235U and 238U from sediments. The values of 234U/238U activity ratio in the sediments indicated that the reduction process of U(VI) to U(IV) and the removing of autogenic uranium from seawater to sediments in the Gdańsk Deep constitutes a small part only.
Źródło:
Nukleonika; 2006, 51,suppl.2; 45-51
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effects of nickel(II) complexes with imidazole derivatives on pyocyanin and pyoverdine production by Pseudomonas aeruginosa strains isolated from cystic fibrosis
Autorzy:
Gałczyńska, Katarzyna
Kurdziel, Krystyna
Adamus-Białek, Wioletta
Wąsik, Sławomir
Szary, Karol
Drabik, Marcin
Węgierek-Ciuk, Aneta
Lankoff, Anna
Arabski, Michał
Powiązania:
https://bibliotekanauki.pl/articles/1038905.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
Pseudomonas sp.
cystic fibrosis
nickel complexes
pyocyanin
pyoverdine
Opis:
Pseudomonas aeruginosa infection is problematic in patients with cystic fibrosis (CF). P. aeruginosa secretes a diversity of pigments, such as pyocyanin and pyoverdine. The aim of this study was to evaluate the effects of complexes of nickel(II) ([Ni(iaa)2(H2O)2]·H2O (iaa = imidazole-4-acetate anion), [Ni(1-allim)6](NO3)2 (1-allim = 1-allylimidazole) and NiCl2 on pyocyanin and pyoverdine production by 23 strains of P. aeruginosa isolated from cystic fibrosis under growth conditions specific for the CF respiratory system. The antibacterial effects and biophysical properties of the tested substances were measured by spectrofluorometric techniques, as well as by laser interferometry, confocal and atomic force microscopy. The cytotoxic properties of all compounds were measured by Annexin/IP assay against A549 cells. All tested compounds have no effect on pyocyanin production and decrease the pyoverdine secretion in about 40% of tested P. aeruginosa strains at non-cytotoxic range of concentrations. Imidazole-4-acetate anion and 1-allylimidazole have good diffusion properties in the mature P. aeruginosa PAO1 biofilm. In conclusion, the tested nickel(II) complexes do not have clinical implications in P. aeruginosa eradication in cystic fibrosis. The diffusion properties of 1-allylimidazole and imidazole-4-acetate and their lack of effect on A549 cells suggest that they might be considered for chemical synthesis with other transition metals.
Źródło:
Acta Biochimica Polonica; 2015, 62, 4; 739-745
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ niklu na wzrost szczepu stenotrophomonas maltolphilia kb2 w obecności fenolu
Impact of nickel on growth of stenotrophomonas maltolphila kb2 in the presence of phenol
Autorzy:
Szczyrba, Elżbieta
Gąszczak, Agnieszka
Szczotka, Anna
Kolarczyk, Hanna
Janus, Bożena
Powiązania:
https://bibliotekanauki.pl/articles/1955360.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Instytut Inżynierii Chemicznej PAN
Tematy:
nikiel
wzrost bakterii
fenol
nickel
bacterial growth
phenol
Opis:
Wykonano eksperymenty mające na celu zbadanie wzrostu komórek szczepu KB2 w obecności niklu, przy zastosowaniu fenolu jako źródła węgla i energii. Przeprowadzane badania potwierdziły hamujący wpływ niklu na wzrost badanego szczepu nawet dla niskich stężeń tego metalu.
The influence of nickel on the growth of KB2 strain was tested for different concentrations of metal in the presence of phenol as the sole carbon and energy source. The inhibition effect of nickel on bacterial growth was confirmed even for low concentration of tested metal.
Źródło:
Prace Naukowe Instytutu Inżynierii Chemicznej Polskiej Akademii Nauk; 2020, 24; 95--105
1509-0760
Pojawia się w:
Prace Naukowe Instytutu Inżynierii Chemicznej Polskiej Akademii Nauk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Real-time monitoring of cell cultures with nickel comb capacitors
Monitorowanie hodowli komórkowych w czasie rzeczywistym przy zastosowaniu niklowych kondensatorów grzebieniowych
Autorzy:
Kociubiński, Andrzej
Zarzeczny, Dawid
Szypulski, Maciej
Wilczyńska, Aleksandra
Pigoń, Dominika
Małecka-Massalska, Teresa
Prendecka, Monika
Powiązania:
https://bibliotekanauki.pl/articles/408219.pdf
Data publikacji:
2020
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
BioMEMS
ECIS
nickel
thin film
nikiel
cienka warstwa
Opis:
The aim of the study was to present a method for assessing the condition of cell culture by measuring the impedance of cells cultured in the presence of nickel. For this purpose, an impedance measurement technique using nickel comb capacitors was used. The capacitor electrodes were made using a thin film magnetron sputtering. In the experimental part, the culture of cells of mouse fibroblasts on the prepared substrate was performed. The cell culture lasted 43 hours and showed that the presented technique allows it to be used to analyze the effect of nickel on cells.
Celem pracy było przedstawienie metody oceny stanu hodowli komórkowej poprzez pomiar impedancji komórek hodowanych w obecności niklu. W tym celu zastosowano technikę pomiaru impedancji z wykorzystaniem niklowych kondensatorów grzebieniowych. Cienkowarstwowe elektrody kondensatora wykonano metodą rozpylania magnetronowego. W części eksperymentalnej przeprowadzono hodowlę komórek mysich fibroblastów na przygotowanym podłożu. Hodowla komórkowa trwała 43 godziny i wykazała, że przedstawiona technika mogłaby być zastosowana do analizy wpływu niklu na komórki.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2020, 10, 2; 32-35
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Inhibiting effect of citric acid on the floatability of serpentine activated by Cu(II) and Ni(II) ions
Autorzy:
Huang, Jun-wei
Zhang, Cheng-qiang
Powiązania:
https://bibliotekanauki.pl/articles/110224.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
copper ion
nickel ion
serpentine
floatation
activation
inhibiting
Opis:
The laboratory researches about the inhibiting effect of citric acid on the flotation performance of serpentine activated by Cu2+ and Ni2+ were carried out through micro flotation tests, zeta potential measurements, collector adsorption capacity measurements and solution chemistry analysis. The flotation results showed that Cu2+ and Ni2+ could remarkably activate the flotation of serpentine when the pH value was more than 6, however, this activation could be effectively weakened by adding citric acid. Zeta potential measurement and adsorption capacity measurement indicated that the presence of citric acid could prevent the adsorption of Cu2+ and Ni2+, and therefore reduce the adsorption amount of potassium butyl xanthate on serpentine surface. Furthermore, solution chemical analysis of the flotation system showed that copper hydroxide Cu(OH)2(s) and the nickel hydroxide Ni(OH)2(s) were the main component in the pH range of 9 to 10, which adsorbed onto serpentine surface and made it activated; while the citric acid could effectively prohibit the formation of these metal hydroxide in slurry so as to inhibit the activation impact.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 4; 960-968
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis of the Nickel-Cobalt-Manganese Cathode Material Using Recycled Nickel as Precursors from Secondary Batteries
Autorzy:
Jung, Hang-Chul
Han, Deokhyun
Kim, Dae-Weon
Ahn, Byungmin
Powiązania:
https://bibliotekanauki.pl/articles/2049177.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
secondary battery
nickel
recycling
Taylor reaction
cathode materials
Opis:
As the amount of high-capacity secondary battery waste gradually increased, waste secondary batteries for industry (high-speed train & HEV) were recycled and materialization studies were carried out. The precipitation experiment was carried out with various conditions in the synthesis of LiNi0.6Co0.2Mn0.2O2 material using a Taylor reactor. The raw material used in this study was a leaching solution generated from waste nickel-based batteries. The nickel-cobalt-manganese (NCM) precursor was prepared by the Taylor reaction process. Material analysis indicated that spherical powder was formed, and the particle size of the precursor was decreased as the reaction speed was increased during the preparation of the NCM. The spherical NCM powder having a particle size of 10 μm was synthesized using reaction conditions, stirring speed of 1000 rpm for 24 hours. The NCM precursor prepared by the Taylor reaction was synthesized as a cathode material for the LIB, and then a coin-cell was manufactured to perform the capacity evaluation.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 4; 987-990
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ultrasound-assisted emulsification–microextraction and spectrophotometric determination of cobalt, nickel and copper after optimization based on Box-Behnken design and chemometrics methods
Autorzy:
Doroudi, Z.
Niazi, A.
Powiązania:
https://bibliotekanauki.pl/articles/778452.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
ultrasound-assisted emulsification–microextraction
chemometrics
cobalt
nickel
copper
Opis:
A fast, simple, and economical method for extraction, preconcentration and determination of cobalt, nickel and copper as their 1-(2-pyridilazo) 2-naphthol (PAN) complexes based on ultrasound-assisted emulsification–microextraction (USAEME) and multivariate calibration of spectrophotometric data is presented. Various parameters affecting the extraction efficiency were optimized both with univariate and Box–Behnken design. The resolution of ternary mixtures of these metallic ions was accomplished by using partial least-squares regression (PLS), orthogonal signal correction-partial least-squares regression (OSC-PLS), and orthogonal signal correction-genetic algorithmspartial least-squares regression (OSC-GA-PLS). Under the optimum conditions, the calibration graphs were linear in the range of 2.0–150.0, 2.0–120.0 and 2.0–150.0 ng mL−1  for Co2+ , Ni2+ , and Cu2+ , respectively, with a limit of detection of 0.14 (Co2+ ), 0.13 (Ni2+ ) and 0.14 ng mL−1  (Cu2+ ) and the relative standard deviation was <2.5%. The method was successfully applied to the simultaneous determination of these cations in different samples.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 1; 21-28
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Plasma Decomposition Of Nickel And Cobalt Compounds
Rozkład termiczny w plazmie związków niklu i kobaltu
Autorzy:
Woch, M.
Lis, M.
Kołacz, D.
Kamińska, M.
Staszewski, M.
Powiązania:
https://bibliotekanauki.pl/articles/350973.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
plasma
decomposition
cobalt
nickel
plazma
rozkład
kobalt
nikiel
Opis:
The paper presents the study on manufacturing of nickel and cobalt powders by thermal plasma decomposition of the carbonates of these metals. It was shown the dependence of process parameters and grain size of initial powder on the composition of final product which was ether metal powder, collected in the container as well as the nanopowder with crystallite size of 70 - 90 nm, collected on the inner wall of the reaction chamber. The occurrence of metal oxides in the final products was confirmed and discussed.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1361-1364
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Review of new developments in machining of aerospace materials
Autorzy:
Jemielniak, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/1428707.pdf
Data publikacji:
2021
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
machining
aerospace materials
nickel alloy
titanium alloy
composite
Opis:
The paper presents an update of the recent literature on advances in machining of difficult to machine materials such as nickel and titanium-based alloys, and composites used in aeroengine and aerostructure applications. The review covers the following issues: advances in high-performance cooling techniques as cryogenic machining, minimum quantity lubrication, the combination of MQL and cryogenic cooling, and high-pressure lubricoolant supply and hybrid cutting processes – vibration assisted machining (both low and high frequency), laser, plasma and EDM assisted machining. Examples of applications in industrial processes are also given.
Źródło:
Journal of Machine Engineering; 2021, 21, 1; 22-55
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie katodowych produktów powstałych na powierzchni niklu w bezwodnych roztworach elektrolitów
The Study of Cathode Products Generated on the Surface of the Nickel Electrode in Anhydrous Solutions of Electrolyte
Autorzy:
Bisztyga, M.
Lelek-Borkowska, U.
Banaś, J.
Powiązania:
https://bibliotekanauki.pl/articles/380763.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nikiel
elektroda niklowa
metanol
redukcja katodowa
analiza powierzchni
mikroskopia elektronowa
nickel
nickel electrode
methanol
cathodic reduction
surface analysis
electron microscopy
Opis:
W artykule przedstawiono metodykę i wyniki badań, jakie otrzymano identyfikując produkty procesów elektrodowych zachodzących w bezwodnych metanolowych roztworach 0.05M CH3ONa – 0.05M LiCl na powierzchni elektrody niklowej. W badaniach wykorzystano spektroskopię w podczerwieni z techniką całkowitego wewnętrznego odbicia (FTIR-ATR). Ponadto przeprowadzono analizę powierzchni elektrody niklowej, po katodowej redukcji przy określonych potencjałach, za pomocą skaningowej mikroskopii elektronowej SEM wraz z analizą badań EDX.
The paper presents the identifying of morphology and composition of surface products occurring on nickel electrode during cathodic polarization in the anhydrous CH3OH – 0.05M CH3ONa – 0.05M LiCl. SEM, EDX and in situ infrared spectroscopy (FTIR-ATR) were used for analysis of surface layer. The investigations showed that nickel electrode undergoes “pseudopassivation” in cathodic range in course of formation of nickel methoxide film. The mechanism of passivation process has been proposed.
Źródło:
Archives of Foundry Engineering; 2014, 14, 4 spec.; 13-16
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies on resistance to erosion of nickel and its alloys to be used in elements of fluid - flow machines
Badania odporności erozyjnej niklu i jego stopu do zastosowania w elementach maszyn przepływowych
Autorzy:
Waliszyn, Aleksandr
Adamkiewicz, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/1365309.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
physics of erosive contamination
resistance
operation
fluid-flow machine
nickel
nickel alloy
zniszczenia erozyjne
odporność
maszyna przepływowa
nikiel
stopy niklu
Opis:
The article presents results of studies on metal resistance to erosive damage taking place under the influence of hydraulic cavitation. On the basis of earlier research, a hypothesis on fatigue character of erosive wear and a dependence of metal resistance to erosive damage on its crystalline lattice structure has been assumed. To verify this hypothesis, metals with different crystalline lattice structures like steel 45 (flat-centred structure), nickel 200/201 and nickel alloy Monel 400 (hexagonal structure) have been tested at a cavitation-strike stand. Results obtained there confirmed the assumed hypothesis, at the same time justifying the use of nickel protective coatings in fluid-flow machines.
W artykule przedstawiono wyniki badań odporności metali na uszkodzenia erozyjne zachodzące pod wpływem kawitacji hydraulicznej. Na podstawie wyników wcześniejszych badań, przyjęto hipotezę o zmęczeniowym charakterze zużycia erozyjnego oraz zależności odporności metali na zniszczenia erozyjne od struktury ich sieci krystalicznej. Dla potwierdzenia przyjętej hipotezy na stanowisku kawitacyjno-udarowym sprawdzono metale z różnymi sieciami krystalicznymi: stal 45 (sieć płasko centralna), nikiel 200/201 oraz stop niklu Monel 400 (sieć heksagonalna). Otrzymane wyniki badań potwierdziły przyjętą hipotezę, wskazując tym samym na zasadność stosowania niklowych powłok ochronnych w maszynach przepływowych.
Źródło:
Eksploatacja i Niezawodność; 2019, 21, 4; 692-696
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Estimation tool for optimum cutting condition of difficult to cut materials
Autorzy:
Soe, Y. H.
Tanabe, I.
Iyama, T.
Da Cruz, J. R.
Powiązania:
https://bibliotekanauki.pl/articles/99777.pdf
Data publikacji:
2012
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
titanium alloy
nickel alloy
cutting machining and calculation model
Opis:
Titanium alloy and nickel alloy are mainly used for several aeronautical parts due to their high strength and durability at high temperature. However, thermal conductivity of these materials are very low and most of the heat generated during cutting are concentrately conducted into the cutting tool. Therefore, the tool become extremely high temperature resulting shorter tool life. In this paper, a method for calculating the optimum cutting condition for cutting low thermal conductivity materials such as titanium alloy and nickel alloy is developed and evaluated. The temperatures on the cutting tool tip for various combination of tools and work piece materials were calculated by dynamic FEM simulation and the estimation tool for optimum cutting condition is created based on these results. The amount of heat flow and the temperature on the cutting tool were calculated based on cutting theory. Then, optimum cutting conditions for those materials were estimated by newly developed program. The method was finally evaluated by several experiments. It is concluded from the results that (1) The developed program is applicable for estimation of optimum cutting conditions regarding titanium alloy and nickel alloy. (2) Titanium alloy (Ti6Al4V) can be machined with longer tool life using estimated optimum cutting condition.
Źródło:
Journal of Machine Engineering; 2012, 12, 1; 76-88
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Control of tool temperature using neural network for machining materials with low thermal conductivity
Autorzy:
Soe, Y. H.
Tanabe, I.
Iyama, T.
Abe, Y.
Powiązania:
https://bibliotekanauki.pl/articles/99454.pdf
Data publikacji:
2010
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
titanium alloy
nickel alloy
neural network
tool
tool temperature
Opis:
Recently titanium and nickel alloys have become pre-eminent for aeronautic and astronautic parts. Since these cutting and becomes severely demaged. It is important to control cutting tool temperature. In this paper,the control system of tool tip temperature using inverse analysis of neural network for machining these materials was developed and evaluated. The neural network between cutting conditions and tool temperature was firstly created by a set of teaching data. Then, a mathematical model using algebra was developed. Cutting speed was selected as parameter to be controlled in reducing tool temperature. The relationship between the optimum cutting speed and cutting time was calculated with the inverse analysis of neural network by pre-reading of NC program before cutting. The tool temperature can be maintained at the desired value. The developed system is evaluated by the expaeriments using the turning process and workpiece of Ti6Al4V. From the results, it is concluded that; (1) Tool tip temperature can be controlled by using the proposed inverse analysis of the neural network, (2) CThe cutting tool life can be maintained by this method, for cutting materials with low thermal conductivity.
Źródło:
Journal of Machine Engineering; 2010, 10, 3; 78-89
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sequence-specific Ni(II)-dependent peptide bond hydrolysis in a peptide containing threonine and histidine residues
Autorzy:
Krężel, Artur
Mylonas, Marios
Kopera, Edyta
Bal, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/1041163.pdf
Data publikacji:
2006
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
activation parameters
complex formation
nickel(II)
peptide bond hydrolysis
Opis:
Previously we demonstrated that Ni(II) complexes of Ac-Thr-Glu-Ser-His-His-Lys-NH2 hexapeptide, representing residues 120-125 of human histone H2A, and some of its analogs undergo E-S peptide bond hydrolysis. In this work we demonstrate a similar coordination and reactivity pattern in Ni(II) complexes of Ac-Thr-Glu-Thr-His-His-Lys-NH2, its threonine analogue, studied using potentiometry, electronic absorption spectroscopy and HPLC. For the first time we present the detailed temperature and pH dependence of such Ni(II)-dependent hydrolysis reactions. The temperature dependence of the rate of hydrolysis yielded activation energy Ea = 92.0 kJ mol-1 and activation entropy ΔS≠ = 208 J mol-1 K-1. The pH profile of the reaction rate coincided with the formation of the four-nitrogen square-planar Ni(II) complex of Ac-Thr-Glu-Thr-His-His-Lys-NH2. These results expand the range of protein sequences susceptible to Ni(II) dependent cleavage by those containing threonine residues and permit predictions of the course of this reaction at various temperatures and pH values.
Źródło:
Acta Biochimica Polonica; 2006, 53, 4; 721-727
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of Electroless Ni-P Coatings on Sisal Fiber
Opracowanie bezprądowego nanoszenia powłok niklowo-fosforowych na włókna sizalowe
Autorzy:
Hemachandran, R.
Pugazhvadivu, M.
Jayabal, S.
Powiązania:
https://bibliotekanauki.pl/articles/232471.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
electroless
nickel
sisal
SEM
EDAX
pole elektromagnetyczne
nikiel
sizal
Opis:
Improving the properties of natural fibers can be interesting from a technological point of view. Modifications can result in a high specific strength, electromagnetic interference (EMI) shielding, antistatic brush etc. Plant fiber composites would make them an option for use in components such as rifle stocks and knife handles etc. The greatest challenge would be to ensure that the components are all weather capable, but today several materials exist that have a high moisture tolerance. Moreover with proper surface coating techniques, most natural fibers materials can be toughened up to use as reinforcement. An attempt was made using a proprietary experimental set-up to coat natural fiber with electroless nickel phosphorus (ENi-P), since sisal fiber is a non-conducting material. In this article the surface morphology, ingredients and cross-section images of the modified natural fibers were characterised by a scanning electron microscope equipped with EDAX.
Poprawa właściwości włókien naturalnych jest interesująca z technologicznego punktu widzenia. Wynikiem modyfikacji może być wysoka wytrzymałość, poprawa ekranowania pól elektromagnetycznych (EMI), poprawa właściwości antystatycznych itp. Powłoki niklowo-fosforowe na włóknach roślinnych umożliwiają wytworzenie różnego rodzaju kompozytów, min. o powierzchni odpornej na wilgoć. Morfologia powierzchni kompozytów była badana za pomocą SEM-EDAX.
Źródło:
Fibres & Textiles in Eastern Europe; 2017, 1 (121); 32-35
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The occupational environment and its impact on occurrence of cancer cases among workers in nickel refinery
Środowisko pracy i jego wpływ na występowanie przypadków raka wśród pracowników rafinerii niklu
Autorzy:
Gallová, E.
Pekarčíková, J.
Majdan, M.
Kállayová, D.
Rusnák, M.
Powiązania:
https://bibliotekanauki.pl/articles/271604.pdf
Data publikacji:
2011
Wydawca:
Górnośląska Wyższa Szkoła Pedagogiczna im. Kardynała Augusta Hlonda
Tematy:
nikiel
narażenie zawodowe
choroby nowotworowe
nickel
occupational exposure
cancer
Opis:
Objective: To demonstrate an occupation exposure impact on incidence of cancer diseases among nickel smelter workers in Sereď, Slovakia. To analyze the occurrence of cancer diseases among smelter workers. To make a risk assessment and survival analyses in selected group of workers. Methods: Retrospective cohort study is based on data about outcomes of work-related exposures in the present and also on the date about known nickel exposure in the past among smelter workers. Observed historical cohort group were 4622 workers in the nickel smelter in Sereď (Galanta district) who were employed during the years 1963 - 1993. Odds ratio (OR), logistic regression and survival analyses were calculate. Results: There were 1348 non-exposed employees (29%) and 3274 exposed employees (71%). There were 4222 employees without recorded cancer (91%) and 400 employees had recorded cancer disease (9%). Among cancer cases we can assess that they mostly work on manufacture department (52% of cases). The most cases were employed in nickel smelter over the 20 years (42%). The 36% of cases were first time employed in nickel smelter at the age of 31 - 40 years old. With increasing age to start work is increasing chance to be sick (OR = 1,48, CI95% = 1,30 - 1,69, P<0,001). Furthermore, with increasing duration of employment is also higher chance to have cancer (OR = 2,23, CI95% = 2,05 - 2,41, P<0,001). Also the higher risk exposure has impact on higher chance to have cancer (OR = 1,46, CI95% = 1,22 - 1,75, P<0,001). Conclusions: Presented study was the first study, which discussed aspects of the possible occupational exposure in the nickel refinery in Sereď in the Slovak Republic.
Cel: Zaprezentowanie wpływu narażenia zawodowego na występowanie chorób nowotworowych u pracowników huty niklu w Sereď, Słowacja. Analiza występowania przypadków zachorowań na raka wśród pracowników huty. Ocena ryzyka zawodowego i analiza przeżycia wybranej grupy pracowników. Metodyka: Retrospektywne badanie kohortowe w oparciu o dane na temat wyników narażeń związanych z obecnym wykonywaniem pracy zawodowej jak i na podstawie rozpoznanych przypadków narażenia zawodowego pracowników huty w przeszłości. Historyczne badania cohortowe obejmowały grupę 4622 pracowników huty niklu w Sereď (okręg Galanta), zatrudnionych w latach 1963 - 1993. Obliczono iloraz szans, regresję logistyczną oraz wykonano analizę przeżycia. Wyniki: Badana grupa obejmowała 1348 (29%) pracowników nie narażonych oraz 3274 narażonych (71%). U 4222 (91%) pracowników nie rozpoznano choroby nowotworowej, raka stwierdzono natomiast u 400 pracowników (9%). Pośród pracowników z wykrytą chorobą nowotworową większość (52% przypadków) była zatrudniona w dziale wytwórczym, przy czym 42% przypadków to osoby o stażu zatrudnienia w hucie niklu przekraczającym 20 lat. 36% zatrudnionych ze stwierdzoną chorobą nowotworową rozpoczęło pracę w hucie w wieku 31 - 40 lat. Wraz ze wzrastającym wiekiem zatrudnienia w hucie wzrasta ryzyko zachorowania na raka (OR = 1,48, CI95% = 1,30 - 1,69, P<0,001). Ponadto, im dłuższy staż pracy tym większe ryzyko raka (OR = 2,23, CI95% = 2,05 - 2,41, P<0,001). Ryzyko to wzrasta też wraz z wydłużeniem okresu narażenia (OR = 1,46, CI95% = 1,22 - 1,75, P ? 0,001). Wnioski: Zaprezentowane badania stanowią pierwszą próbę omówienia aspektów potencjalnego narażenia zawodowego występującego w hucie niklu w Sereď, Słowacja.
Źródło:
Journal of Ecology and Health; 2011, R. 15, nr 3, 3; 150-154
2082-2634
Pojawia się w:
Journal of Ecology and Health
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Konwersja technologiczna stopów niklu pracujących w ekstremalnych warunkach
Technological conversion of Ni-based superalloys working in extreme conditions
Autorzy:
Latałło-Anulewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/391811.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Odlewnictwa
Tematy:
konwersja materiałowo-technologiczna
nadstopy niklu
technological conversion
nickel superalloys
Opis:
Istotą procesu konwersji w obszarze przemysłu metalowego jest wprowadzenie innowacyjnych pod względem materiałowym i technologicznym odlewanych komponentów w produkowanych maszynach i urządzeniach w miejsce tradycyjnych elementów kutych, spawanych, często wytwarzanych drogą obróbki mechanicznej, łączonych mechanicznie w bardziej złożone komponenty. Powszechnie wiadomo, że technologie odlewania, w przeciwieństwie do innych wymienionych powyżej technik formowania metalu, pozwalają nadać metalowi dowolny i nieraz najbardziej skomplikowany kształt – co daje możliwość wykonania odlewów zintegrowanych – niezbędnych elementów nowoczesnych maszyn i urządzeń. Powszechnie stosowane elementy metalowe wykonane technikami kucia czy też tłoczenia są zazwyczaj łączone (integrowane) dzięki stosowaniu technik spawania lub innych technik łączenia metali. Oznacza to niemal w każdym przypadku znaczną masę całego elementu, mniejszą jego sztywność, niską odporność na pracę w warunkach wysokiej temperatury, zmieniających się obciążeń, a także niższą odporność na zużycie ścierne. Z pomocą w tym przypadku przychodzą technologie odlewnicze, które mają do dyspozycji lekkie, wytrzymałe, odporne na wysokie temperatury i zmęczenie cieplne różnego rodzaju stopy odlewnicze. Jednocześnie przy wykorzystaniu nowoczesnych technik formowania jest możliwe tworzenie odlewów o bardzo złożonych i skomplikowanych kształtach, które jako jeden zintegrowany element w urządzeniu jest w stanie zastąpić kompleks innych elementów metalowych połączonych różnymi technikami. Takie rozwiązanie zapewni optymalizację właściwości użytkowych końcowego urządzenia. Naturalnym, oczywistym i zasadnym jest, że nie każdy metalowy element konstrukcyjny maszyny czy urządzenia powinien być zastępowany zintegrowanym elementem odlewanym. Toteż wykonanie konwersji powinno zostać poprzedzone szczegółowym procesem badawczo-aplikacyjnym ukierunkowanym na techniczną i ekonomiczną opłacalność takiej konwersji. Obecny poziom techniki odlewniczej pozwala na realizację konwersji odlewanych metalowych komponentów istotnych dla budowy maszyn stosowanych w rolnictwie, budownictwie, energetyce i eksploatacji bogactw naturalnych.
The essence of the conversion process is the introduction of innovative in terms of materials and technology of cast parts, as components of manufactured machines and equipment in place of the traditional elements forged, welded, mechanically assembled parts. It is well known that the technology of casting, in contrast to other metal forming, mentioned above techniques will make it possible to give to metal even the most complicated shape – which gives the possibility to make integrated castings – essential elements of modern machines and equipment. Commonly used metal elements made by forging techniques have to be integrated by the use of welding techniques, or other metal joining techniques. This means that in almost every case a significant increase in weight of the entire item, low resistance to work in high temperature conditions, lower abrasion resistance. With the help to solve that case there are foundry technologies that are at the disposal of lightweight, durable, resistant to high temperatures and thermal fatigue different types of metal material. At the same time using modern molding techniques it is possible to create an integrated casting component, which, as an element of the device is able to replace complex combined different techniques other metal parts. This will ensure the optimization of the performance of the final device. It is natural and obvious that not every piece of metal construction machine or equipment will be possible to replace by an integrated casting part. Therefore, the performing of conversion process should be preceded by a detailed study, research and application-oriented process towards the technical and economic viability of such a conversion. The current level of technology allows the realization of the conversion of cast metal components essential for construction machinery used in agriculture, construction, power generation and exploitation of natural resources.
Źródło:
Prace Instytutu Odlewnictwa; 2018, 58, 3; 201-208
1899-2439
Pojawia się w:
Prace Instytutu Odlewnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation of Nickel Powders by Reduction of Nickel Hydroxide Using the Taylor Fluid Flow
Autorzy:
Park, I.-J.
Kim, D.-W.
Kim, G.-H.
Chae, H.-J.
Jung, H.-C.
Powiązania:
https://bibliotekanauki.pl/articles/355021.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ni(OH)2
nickel
Taylor fluid flow
fine powder
Opis:
In this study, Ni(OH)2 was synthesized by the continuous reaction by the Taylor fluid flow and compared with those prepared from the conventional batch type reaction. The nickel powders were synthesized by reduction of Ni(OH)2 in an aqueous solution with hydrazine hydrate acting as the reductant. And then the characteristics of the nickel powder according to the synthesis method were compared. The average particle size of the synthesized Ni(OH)2 using Taylor reactor was generally decreased about 1.5~2.5 times more than the batch reaction. The nickel powders prepared by the batch reaction highly agglomerated with non-uniform particles. In the Taylor reaction, the agglomeration of particles was broken and uniform nickel powder was produced.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1443-1447
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Composition and Optical Dispersion Characterization of Nanoparticles ZnO-NiO Thin Films: Effect of Annealing Temperature
Autorzy:
Oboudi, S.F.
Habubi, N.F.
Mohamed, G.H.
Chiad, S.S.
Powiązania:
https://bibliotekanauki.pl/articles/412573.pdf
Data publikacji:
2013
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
TCOs
Dispersion parameters
Thermal evaporation
zinc oxide
Nickel Oxide
Opis:
Thin films of ZnO0.7NiO0.3 have deposited on glass substrates at room temperature by using thermal evaporation technique under vacuum 10-5 mbar. The optical properties and dispersion parameters of the films have been studied. Changes in direct optical energy band gap of films were confirmed before and after annealing. The optical energy gap Eg decreased from 3.11 to 2.86 eV with increasing of annealing temperature to 200 ºC. Some of the optical absorption parameters, such as optical dispersion energies Eo and Ed, Urbach tails EU , dielectric constant ε, the average values of oscillator strength So, and wavelength of single oscillator λo have been reported. An increase in the annealing temperature causes an increase in the average oscillator strength from 62.02 to 87.71 eV.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2013, 8, 1; 78-86
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Induction of hemolysis and eryptosis by occupational pollutant nickel chloride is mediated through calcium influx and p38 MAP kinase signaling
Autorzy:
Alfhili, Mohammad A.
Alamri, Hassan S.
Alsughayyir, Jawaher
Basudan, Ahmed M.
Powiązania:
https://bibliotekanauki.pl/articles/2085691.pdf
Data publikacji:
2022-02-15
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
calcium
p38 MAPK
oxidative stress
hemolysis
nickel
eryptosis
Opis:
ObjectivesNickel (Ni) is an abundant environmental hazard and an occupational pollutant. Exposure to Ni compounds is prevalent in electroplating workers and in the printing industry, among others. The toxicity of Ni manifests as dermatological, gastrointestinal, respiratory, allergic, and cardiovascular symptoms. In particular, hyperbilirubinemia and reticulocytosis have been detected in intoxicated subjects; an observation possibly implicating selective red blood cell (RBC) toxicity. Herein, the interaction of nickel chloride (NiCl2) with human RBCs and associated molecular mechanisms are described.Material and MethodsCells from healthy donors were incubated for 24 h at 37°C in the presence or absence of 0.5‒10 mM of NiCl2, and cytotoxicity was determined through hemoglobin leakage by colorimetry under different experimental conditions. Eryptotic markers were also identified by flow cytofluorometry using Annexin-V-FITC tagging for phosphatidylserine (PS) exposure, light scatter properties for cellular dimensions, Fluo4/AM labeling for intracellular calcium, and H2DCFDA staining for reactive oxygen species (ROS). Additionally, small molecule inhibitors were used to probe the signaling pathways involved.ResultsIt was found that NiCl2 at 10 mM caused profound intracellular calcium overload and significant calcium-dependent hemolysis. Also, NiCl2 reduced forward scatter and increased side scatter, Annexin-positive cells, and ROS levels. Importantly, NiCl2-induced hemolysis was significantly attenuated by the exclusion of extracellular calcium, and in the presence of p38 MAP kinase (MAPK) inhibitor SB203580.ConclusionsIt is concluded that NiCl2 induces p38 MAPK-dependent hemolysis, and stimulates the canonical features of premature eryptosis. This report presents the first description of the molecular mechanisms underlying the hemolytic and eryptotic potential of NiCl2 and, thus, may explain changes in hematological parameters observed in poisoning victims.
Źródło:
International Journal of Occupational Medicine and Environmental Health; 2022, 35, 1; 1-11
1232-1087
1896-494X
Pojawia się w:
International Journal of Occupational Medicine and Environmental Health
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of fatigue life of aluminized, coarse-grained MAR247 alloy supported by full-field ESPI measurements
Autorzy:
Kopec, Mateusz
Kukla, Dominik
Kowalewski, Zbigniew L.
Powiązania:
https://bibliotekanauki.pl/articles/2200834.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
fatigue development
damage
nickel alloys
electronic speckle pattern interferometry
Opis:
In this paper, fatigue performance of an aluminide layer coated, coarse-grained MAR247 nickel superalloy was monitored by using the full-field Electronic Speckle Pattern Interferometry (ESPI) method in the range of stress amplitude from 350MPa to 650MPa. It was found, that the ESPI method enables precise monitoring of the fatigue behaviour of coated MAR247 specimens since the area of potential failure was accurately indicated within the initial stage of fatigue damage development.
Źródło:
Journal of Theoretical and Applied Mechanics; 2022, 60, 4; 619--623
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wzbogacanie laterytów pochodzących z miejscowości Trestenik w Kosowie
Enrichment of laterite ore from Trstenik locality in Kosovo
Autorzy:
Kova, L.
Kulova, E
Fecko, P.
Powiązania:
https://bibliotekanauki.pl/articles/318120.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
nikiel
rudy laterytowe
złoże rud żelaza Trstenik
ługowanie chemiczne laterytu
nickel
locality Trstenik in Kosovo
chemical extraction of nickel from laterites
Opis:
W artykule omówiono możliwości ekstrakcji niklu z laterytów, wydobywanych z miejscowości Trstenik w Kosowie. Region ten jest jednym z największych w Europie pod względem zasobów niklu. Dlatego konieczne jest prowadzenie badań nad optymalizacją procesów wzbogacania. Do wzbogacania laterytów postanowiono zastosować ługowanie chemiczne stosując następujące rodzaje odczynników chemicznych: kwas solny, kwas azotowy V, kwas siarkowy VI, kwas octowy, kwas szczawiowy, wodorotleneku amonu, wodorotlenek sodu, woda destylowana oraz gorąca woda. Woda królewska była stosowana w postaci mieszaniny kwasu HNO3 i HCl w stosunku 1 do 3. Uzyskane wyniki sugerują, że przy zastosowaniu wody królewskiej możliwe jest uzyskanie roztworu o zawartości 72% Ni. Stosowanie kwasów nieorganicznych, wiąże się z uzyskaniem gorszych wyników ługowania.
The paper deals with possible extraction of nickel from laterites coming from the locality of Trstenik in Kosovo. This locality is one of the largest in Europe as for Ni content and thus, it is necessary to test certain benefication processes. With regard to the fact that it is the case of laterites, chemical leaching was applied testing the following types of chemical agents: hydrochloric acid, nitric acid, sulphuric acid, acetic acid, oxalic acid, ammonium hydroxide, sodium hydroxide, distilled water, warm up water. Aqua regia was applied in the form of acid mixture of HNO3 and HCl in 1:3 proportion. The acquired results imply that applying aqua regia it is possible to retrieve 72% of Ni. Mineral acids provided partial results.
Źródło:
Inżynieria Mineralna; 2011, R. 12, nr 1, 1; 79-88
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zaawansowana metoda symulacyjna zwiększenia efektywności obróbki stopu niklu - studium przypadku
Advanced simulation method of efficiency increase when nickel alloy machining - case study
Autorzy:
Zębala, W.
Matras, A.
Otko, T.
Powiązania:
https://bibliotekanauki.pl/articles/339866.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Zarządzania Produkcją
Tematy:
optymalizacja
toczenie
wydajność skrawania
simulation
efficiency
nickel alloy
machining
Opis:
Paper presents some investigations concerning FEM simulation analysis and optimization of turning process of the external engine block surface. As a part of examinations carried out, selected cutting operations of upper flange were analyzed. These concerned facing, external and internal turning. To conduct the feed speed optimization process a force model was built which enabled to calculate cutting forces values depending on cutting parameters and cross section of machined layer. The optimization research had the aim to stabilize the time course of cutting force values taking place during machining.
Źródło:
Zarządzanie Przedsiębiorstwem; 2017, 20, 2; 34-40
1643-4773
Pojawia się w:
Zarządzanie Przedsiębiorstwem
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Damage development of Inconel 718 due to laboratory simulated creep
Autorzy:
Makowska, K.
Brodecki, A.
Mackiewicz, S.
Kowalewski, Z. L.
Powiązania:
https://bibliotekanauki.pl/articles/949297.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
creep
nickel superalloy
microstructure
pre-deformation
hardness
acoustic birefringence
Opis:
The paper presents an attempt of application of the acoustic birefringence coefficient for early stage degradation assessment of Inconel 718 nickel superalloy after short-term creep. It is shown that it can serve as a good damage sensitive parameter and, moreover, it can be well correlated with hardness variation.
Źródło:
Journal of Theoretical and Applied Mechanics; 2018, 56, 3; 893-896
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recovery of cobalt and nickel by atmospheric leaching of flotation sulfide concentrate from lubin concentrator
Autorzy:
Gibas, K.
Borowski, K.
Chmielewski, T.
Wejman, K.
Powiązania:
https://bibliotekanauki.pl/articles/951849.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
atmospheric leaching
cobalt
nickel
sulphuric acid
Lubin copper concentrate
Opis:
An experimental study on leaching of cobalt and nickel from a Lubin (Poland) sulfide flotation copper concentrate with oxygenated sulphuric acid solution in the presence of iron(III) sulfate is presented. The effect of temperature, iron(III) concentration, initial sulphuric acid concentration, oxygen flow rate and chloride ions addition on cobalt and nickel leaching were examined. The obtained results show, that enhancing investigated leaching parameters increases both the rate and leaching recovery of nickel and cobalt. The effect of iron(III) ions concentration is particularly significant. Additionally, a significant correlation between copper and nickel/cobalt leaching recovery was observed. Due to the fine dissemination of nickel and cobalt, they were leached remarkably faster when copper leaching recovery exceeded 90%.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 1; 191-203
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of silver, nickel and copper cyanides on gold adsorption on activated carbon in cyanide leach solutions
Autorzy:
Sayiner, B.
Acarkan, N.
Powiązania:
https://bibliotekanauki.pl/articles/109675.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
gold
silver
nickel
copper
cyanide leaching
activated carbon adsorption
Opis:
The effect of Ag, Ni and Cu cyanides on gold adsorption on activated coconut carbon in cyanide leach solutions was investigated by synthetic cyanide leach solutions containing gold and other metal cyanides. According to the adsorption tests Ag remarkably reduces the gold adsorption on activated carbon by competing with gold to adsorption sites. When the Ag concentration in solution increases up to 200 ppm the carbon adsorption method for gold recovery becomes inapplicable. Ni has an effect on gold adsorption on activated carbon, however even at as high concentrations of Ni as 250 ppm residual Au in solution is still below 1 ppm. Cu addition up to 300 ppm does not affect the gold loading significantly. According to the adsorption test studies, it is concluded that the metal-cyanides diminish the gold adsorption on activated carbon by adsorbing themselves and competing with gold. When the metals are present in the leach solution all together with gold, they also prevent adsorption of themselves as well as gold. Thus, when Au, Ag, Ni and Cu are present in solution simultaneously, the adsorption of all these metals decreases. The adsorption results were modeled by Fleming k,n adsorption kinetic model.
Źródło:
Physicochemical Problems of Mineral Processing; 2014, 50, 1; 277-287
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Separation of nickel and zinc ions in a synthetic acidic solution by solvent extraction using D2EHPA and Cyanex 272
Autorzy:
Gharabaghi, M.
Irannajad, M.
Azadmehr, A. R.
Powiązania:
https://bibliotekanauki.pl/articles/110275.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
D2EHPA
Cyanex 272
nickel extraction
zinc extraction
Opis:
Solvent extraction was used to recover nickel and zinc from synthetic acidic solution. Many leaching solution and waste waters contain both zinc and nickel at the same time. Bis (2,4,4trimethylpentyl) phosphinic acid (Cyanex 272) and Di(2-ethylhexyl) phosphoric acid (D2EHPA) were used to separate nickel and zinc. In the D2EHPA system, at equilibrium pH of 2, zinc extraction was more than 98% whereas nickel extraction was only 0.36%. The extraction of metals was found to increase with an increase of pH of the aqueous phase. At equilibrium pH 3.5, zinc extraction was completed and higher than 99% zinc was extracted using Cyanex 272. The maximum nickel extractions using D2EHPA and Cyanex 272 were achieved at equilibrium pH 4.5 and 7.5, respectively. Both extractants showed the relatively good separation levels between nickel and zinc. D2EHPA and Cyanex 272 isotherms for single metal solutions showed that the extraction order was Zn2+>Ni2+. ΔpH1/2 value showed that the separation of nickel and zinc using Cyanex 272 was simpler than D2EHPA system. The stripping study was performed using sulphuric acid and it was shown that above 98% zinc and nickel could be extracted. These results demonstrated separation of zinc and nickel from sulphate solutions to be favorable.
Źródło:
Physicochemical Problems of Mineral Processing; 2013, 49, 1; 233-242
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of a novel depressant on the separation of talc and copper –nickel sulfide ore
Autorzy:
Gu, Guohua
Chen, Zhixiang
Zhao, Kaile
Song, Siyu
Li, Shuangke
Wang, Chongqing
Powiązania:
https://bibliotekanauki.pl/articles/110492.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
Sodium alginate
talc
copper–nickel sulfide
polysaccharide depressant
flotation
Opis:
This paper researched the influence of the polysaccharide polymer sodium alginate (SAG) on the depression of talc at a fixed room temperature about 25 °C through micro flotation and batch flotation experiments, zeta potential and contact angle measurements as well as infrared spectroscopy analysis. The flotation results displayed that the SAG had a significant influence on the flotation of talc but less influence on sulphide flotation. Compared with the depressant carboxymethyl cellulose (CMC) and guar gum, using of the SAG gave the highest copper recovery. It could not only eliminate a talc removal step, but also significantly decrease in the depressant consumption by half at least. Sodium alginate apparently adsorbs on the talc surface and promotes hydrophilization, as revealed by contact angle tests (contact angle decreased from 75 to 33° after treating with SAG). It is demonstrated that the SAG obviously absorbed at the surface of talc but rarely for chalcopyrite through the results of zeta potential measurements and infrared spectroscopy analysis.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 1; 116-127
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recovery of copper and nickel from polymetallic sulphate leach solution of printed circuit boards using Dowex M 4195
Autorzy:
Ajiboye, Ayorinde E.
Olashinde, Folorunsho E.
Adebayo, Ojo A.
Ajayi, Olubode. J.
Powiązania:
https://bibliotekanauki.pl/articles/110680.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
recovery
copper
nickel
Dowex M4195
kinetics
isotherms
reuse
Opis:
Sulphuric acid leach solution of waste printed circuit boards (PCBs) contains predominantly copper and iron with later remain problematic during electrowinning of the formal. In this study, performance of Dowex M 4195 resin for recovery of copper and nickel from polymetallic sulphate leach solution of waste PCBs was investigated by batch experiments. It was observed that at pH 0.5, about 45.2 and 3.6 % Cu2+ and Ni2+ was selectively recovered respectively. Recovery efficiency of Ni2+ increased with increase in pH from 0.5 -5.0 while pH2 was optimum for the recovery of Cu2+. Sharp increase in co-recovery of Fe3+/Fe2+ was observed at pH above 2 with that of Zn2+ and Co2+ became low due to hindrance from binding site by high concentration of Cu2+. Adsorption data obtained for Cu2+ and Ni2+ were tested with adsorption isotherms as well as kinetics. It is shown that adsorption of Cu2+2+ was well fitted to both Langmuir and Freundlich isotherm. Kinetics of Cu2+ and Ni2+ fitted into Pseudo-first and well fitted to second order. Reuse studies shows that the resin strong affinities for Cu2+ and Ni2+ remain unchanged.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 5; 1156-1164
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on leaching kinetics of laterite ore using hydrochloric acid
Autorzy:
Li, Jinhui
Xu, Zhifeng
Wang, Ruixiang
Gao, Yang
Yang, Yang
Powiązania:
https://bibliotekanauki.pl/articles/110911.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
nickel laterite
hydrochloride acid
kinetics analysis
hydrometallurgy
leaching mechanism
Opis:
The process of atmosphere-pressure acid leaching of laterites has attracted considerable attention in the nickel industry in recent years. However, the leaching kinetics of laterite using hydrochloride acid has not yet been fully researched. In this paper, the mineral analysis of the ore was carried out, and the leaching mechanism of different minerals at different time was studied comprehensively. The kinetics analysis of the leaching process of nickel, cobalt and manganese showed that the kinetics model of diffusion controlling was suitable and could be described by the linear equation, 1-3(1-a)2/3+2(1-a)=k2t. Based on the linear equation and the Arrhenius equation, the values of activation energy of metal leaching can be deduced (11.56 kJ/mol for nickel, 11.26 kJ/mol for cobalt and 10.77 kJ/mol for manganese). Study of leaching mechanism shows that the order of these minerals dissolution is: goethite, lizardite, magnetite and hematite. Due to the original or product of silica, magnetite, hematite and talc, they can form the solid film which hinders the leaching of valuable metals. Thus, the diffusion controlling step is inner diffusion, namely solid film diffusion controlling.
Źródło:
Physicochemical Problems of Mineral Processing; 2019, 55, 3; 711-720
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nickel catalyst in coupled plasma-catalytic system for tar removal
Autorzy:
Woroszył-Wojno, Joanna
Młotek, Michał
Ulejczyk, Bogdan
Krawczyk, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/1849320.pdf
Data publikacji:
2021
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
gliding discharge
plasma-catalytic system
tar decomposition
nickel catalyst
Opis:
Tar formation is a significant issue during biomass gasification. Catalytic removal of tars with the use of nickel cata-lyst allows to obtain high conversion rate but coke formation on catalysts surface lead to its deactivation. Toluene decomposition as a tar imitator was studied in gliding discharge plasma-catalytic system with the use of 5%, 10% and 15% by weight Ni and NiO catalyst on Al2O3 (α-Al2O3) and Peshiney (γ-Al2O3) carrier in gas composition similar to the gas after biomass pyrolysis. The optimal concentration of nickel was identified to be 10% by weight on Al2O3. It was stable in all studiedinitial toluene concentrations, discharge power while C7H8 conversion rate remained high – up to 82%. During the process, nickel catalysts were deactivated by sooth formation on the surface. On catalysts surface, toluene decomposition products were identified including benzyl alcohol and 3-hexen-2-one.
Źródło:
Polish Journal of Chemical Technology; 2021, 23, 3; 24-29
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dry and steam reforming of methane. Comparison and analysis of recently investigated catalytic materials. A short review.
Autorzy:
Summa, Paulina
Samojeden, Bogdan
Motak, Monika
Powiązania:
https://bibliotekanauki.pl/articles/779028.pdf
Data publikacji:
2019
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
dry methane reforming
steam methane
reforming
nickel catalyst
hydrotalcite
Opis:
In order to produce valuable syngas, industrial processes of dry reforming of methane and steam reforming of methane must be further developed. This paper is focused on reviewing recently examined catalysts, supporting the mentioned technologies. In both processes the most popular active material choice is usually nickel, due to its good availability. On the other hand, noble metals, such as ruthenium, rhodium or platinum, provide better performance, however the solution is not cost-effective. Materials used as a support influence the catalytic activity. Oxides with basic properties, such as MgO, Al2 O3 , CeO2 , are frequently used as carriers. One of the most promising materials for reforming of methane technologies are hydrotalcites, due to adjustable composition, acid-base properties and possibility of incorporation of various metals and complexes.
Źródło:
Polish Journal of Chemical Technology; 2019, 21, 2; 31-37
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Platinum dissolution and ethanol oxidation reaction on Pt-activated nickel foam in sodium hydroxide solution
Autorzy:
Pierozynski, B.
Mikolajczyk, T.
Powiązania:
https://bibliotekanauki.pl/articles/779425.pdf
Data publikacji:
2017
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Pt-activated nickel foam
ethanol oxidation reaction
Pt-dissolution
Opis:
Electrochemical oxidation of ethanol becomes an important process of modern electrochemistry, due to its potential application into direct ethanol fuel cell technology. As rates of ethanol oxidation reaction (EOR) are significantly enhanced in alkaline media, employment of highly corrosion resistant under alkaline conditions, but non-noble metals becomes of superior practical importance. This communication article reports on the process of anodic dissolution of platinum, which is investigated on Pt activated, electrooxidized nickel foam electrodes, employed for ethanol oxidation reaction in 0.1 M sodium hydroxide solution. The above was revealed through the application of cyclic voltammetry and combined SEM/EDX (scanning electron microscopy and energy dispersive x-ray) spectroscopy examinations.
Źródło:
Polish Journal of Chemical Technology; 2017, 19, 3; 41-43
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Various Organic Additives in Galvanic Bath on Properties of Ni-SiC Composite Coatings
Autorzy:
Nowak, M.
Mizera, J.
Kłyszewski, A.
Dobkowska, A.
Boczkal, S.
Kozik, A.
Koprowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/357020.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
organic additives
SiC
composite coatings
nickel coatings
zeta potential
Opis:
The paper presents the results of the electrodeposition of nickel composite coatings reinforced with the ceramic SiC particles. A Watts type galvanic bath modified with various organic additives was used. These additives were: 2-sulfobenzoic acid imide (LSA), dioctyl sulfosuccinate sodium salt (DSS), sodium dodecyl sulfate (SDS), tris (hydroxymethyl) aminomethane (THAM) and hexamethyldisilizane (HMDS). The nickel composite coating was electrodeposited on a 2xxx aluminum alloy series substrate (EN-AW 2017) with zinc interlayer. Studies concerned the effect of the applied organic additives on properties of composite coatings such as: microstructure, microhardness, adhesion to the substrate, corrosion resistance and roughness. The structure of the coatings was assessed by scanning electron microscopy and light microscopy. Based on the studies of zeta potential it was found that the bath modification had a significant impact on the amount of the ceramic phase embedded in metal matrix. The tests conducted in a model 0.01 M KCl solution were not fully representative of the true behavior of particles in a Watts bath.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 4; 1327-1333
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Durability of chitosan/cellulose hydrogel beads regenerated from an ionic liquid in acidic and basic media and their metal adsorptive characteristics
Autorzy:
Matsumoto, Michiaki
Ishikawa, Sayumi
Kamigaki, Tatsuya
Powiązania:
https://bibliotekanauki.pl/articles/1034207.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Polskie Towarzystwo Chitynowe
Tematy:
Chitin
Emim
adsorption
cellulose
copper
ionic liquid
nickel
zinc
Opis:
Chitosan–cellulose gel beads were regenerated from an ionic liquid, and their application to a metal adsorbent was examined. The chitosan–cellulose gel beads, which were prepared from 1-ethyl-3-methyl imidazolium acetate, were more stable in the acidic and basic aqueous solutions than cellulose or chitosan. The adsorption of copper on chitosan–cellulose gel beads was examined, and the adsorption amount of copper ion increased with pH, suggesting that amino groups on chitosan were related to adsorption. The adsorption isotherm of copper, zinc, and nickel ions was well described by the Langmuir model, and the adsorption ability of these metal ions obeyed the Irving-Williams series. Fe3+, Mn2+, and Co2+ from a buffer solution and Pt4+, Au3+, and Pd2+ from a hydrochloric acid solution were not adsorbed on the chitosan–cellulose gel beads.
Źródło:
Progress on Chemistry and Application of Chitin and its Derivatives; 2019, 24; 145-150
1896-5644
Pojawia się w:
Progress on Chemistry and Application of Chitin and its Derivatives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Cutting Conditions on Temperature Distribution in Face Milling of Inconel 718 Nickel-Chromium Alloy
Autorzy:
Grzesik, W.
Nieslony, P.
Habrat, W.
Laskowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/99958.pdf
Data publikacji:
2015
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
3D FEM simulation
milling process
nickel-chromium alloy
Opis:
This paper presents 3D FEM simulation results obtained for the milling operations on a nickel-chromium alloy (Inconel 718) using the Johnson-Cook material constitutive model and variable cutting conditions. Face milling tests were carried out using silicon-aluminum-oxygen-nitrogen (SiAlON) ceramic cutting tools inserts. The machining conditions were selected based on real production data (cutting speed of vc=750 and 800 m/min, feed of f=0.1, 0.125 and 0.15 mm/t, depth of cut of ap=1, 1.5 and 2 mm). The FEM simulations include the maximum and average values of the cutting temperature. They were compared with experimental data obtained by using the high speed infra-red camera.
Źródło:
Journal of Machine Engineering; 2015, 15, 2; 5-16
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cytogenetic toxicity effects of inorganic nickel and organic Ni[II] complexes on Brassica oleracea L. root meristem
Autorzy:
Molas, J
Powiązania:
https://bibliotekanauki.pl/articles/2041800.pdf
Data publikacji:
2001
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
organic nickel
mitosis
metal ion
root meristem
inorganic nickel
cytotoxicity
cabbage
genotoxicity
stress tolerance
cytogenetic toxicity
plant biology
Brassica oleracea
heavy metal
Źródło:
Journal of Applied Genetics; 2001, 42, 3; 257-268
1234-1983
Pojawia się w:
Journal of Applied Genetics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of alkaline promoters on the properties of the Ni/HAp catalyst in the methane dry reforming reaction
Autorzy:
Cichy, Marcin
Zawadzki, Witold
Powiązania:
https://bibliotekanauki.pl/articles/29521159.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
hydrogen
synthesis gas
nickel catalyst
dry reforming
coking
alkaline promoter
Opis:
The reforming of methane with carbon dioxide is still of great interest due to the ever-increasing demand for synthesis gas and hydrogen. This process makes it possible to use two major gases that are considered harmful to the environment. The main problem for its commercial application is the lack of a catalyst that is both active, selective towards syngas (a mixture of hydrogen and carbon monoxide) and resistant to deactivation by coke deposition. Nickel is the most commonly used metal in methane reforming reactions due to its high activity and reasonable price. But still there is a gap in the literature for research on novel catalysts and their properties modifications devoted to strategies to reduce deactivation of the catalysts caused by the coke formation. In the present work a series of hydroxyapatite supported nickel catalysts promoted by alkali metals (Li, Na, K and Cs) were tested. The surface and structural properties of the catalysts were well characterized by physicochemical methods. Activity and selectivity were measured at 600ºC for 20 hours’ time-on-stream test. Resistance to coking was measured with Magnetic Suspension Balance. The stability of the catalyst was improved by the addition of promoters, which reduced the rate of coking. In particular, the cesium-promoted Ni/HAp catalyst significantly inhibited coke deposition, while slightly reducing methane conversion and selectivity to hydrogen.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 4; art. no. 182856
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies