Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Diesel engines" wg kryterium: Temat


Tytuł:
BMD ecofuel for diesel engines
Autorzy:
Struś, M.
Sitnik, L.
Piętak, A.
Powiązania:
https://bibliotekanauki.pl/articles/243008.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
ecofuels
biomixdiesel
BMD
engines
diesel engines
Opis:
The World is strongly dependent on crude oil for its transport needs. In order to diminish this dependence, we need to introduce clean, CO2-efficient, secure and affordable transportation fuels. The current production of liquid biofuels in the EU25 is less than 1% of the market. Recent assessments have concluded that the 2010 targets, 18 Mtoe used in the transport sector, are unlikely to be achieved. There can be three basic possibilities of accomplishing this target: i) use of alcohols (first of all ethanol) and their mixing with petrol; ii) use of fatty acids esters (methyl or ethyl) of vegetable oils and their mixing with diesel fuel, iii) use of synthetic hydrocarbons of the synthetic gas coming from biomass resources and eventually their mixing with other "classical" hydrocarbons. This paper presents a novel way of utilizing alcohols as fuels for a diesel engine. It is proposed to use heavy alcohols as a mix with vegetable oils and conventional diesel fuel. It is presented the way to use alcohols. Namely, the use of heavy alcohols as a solvent for vegetable oil (named the biomix or BM) and after the obtainment of the thickness, which would be approximate to diesel fuel, mixing the biomix with diesel fuel to obtained biomixdiesel (BMD). This solution will be shown for example with butanol as heavy alcohol, rape oil as vegetable oil and conventional diesel fuel. The investigations are carried out with a simple diesel engine on the engine test bed. Main parameters of engine (power output, torque, specifically fuel consumption) and the main exhaust gas component (in this case CO, NOx, PM) will be investigated. There were better results achieved than one expected. Opposed to existing experiences, the maximum of power output and the torque of engine are higher in the whole range of the rotational speed of the engine crankshaft when the engine biomixdiesel (BMD) is reinforced. The addition of the component biomix to fuel influences the specific fuel consumption. Generally, with the larger part of the component biomix the specific fuel consumption grows. Because the power of engine also grows up one should expect that in exploitation the specific fuel consumption should not increase. Very important is that this fuel could be used to reinforce old, existing now and the future diesel engines. The production of butanol is known (from biomass and in other way with electrolysis of ethanol). The possibility to get butanol from ethanol gives a very good perspective for the use of ethanol from today's overproduction and moreover without the essential change of infrastructure. All this leads to the conclusion that fulfilling of the expected requirements of European Union regarding the ecofuels is fully possible.
Źródło:
Journal of KONES; 2012, 19, 4; 589-599
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An analysis of cause and effect relations in diagnostic relations of marine Diesel engine turbochargers
Autorzy:
Adamkiewicz, A.
Powiązania:
https://bibliotekanauki.pl/articles/359843.pdf
Data publikacji:
2012
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
diagnostic relations
turbocharger
Diesel engines
Opis:
The article justifies the need to analyse diagnostic relations for turbocharger operation purposes. Types of turbochargers most frequently used in modern marine engines have been presented. Turbocharger decomposition has been conducted on a selected example. The influence of typical inefficiencies in respect to symptom value changes has been worked out for each heat engine and sub-system. Validation of selected cause and effect relations has been based on operational experience in the technical scale.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2012, 31 (103); 5-13
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Self-regeneration method of diesel particulate filter
Autorzy:
Mitianiec, W.
Powiązania:
https://bibliotekanauki.pl/articles/950135.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engines
exhaust emission
DPF
Opis:
Compression ignition engines have no possibility for self-regeneration of DPF and regeneration requires additional energy for soot combustion (additional fuel or electric energy) after some period of the engine work as a result of closing of substrate pores by soot. The innovation method takes into account a self-regeneration of diesel particle filter by use of special heat recovery system. The paper shows one of possible design of DPF self-regeneration. The exhaust temperature behind the turbine and catalytic converter is very low and for an increasing of gas temperature before DPF, the heat from soot combustion can be used. The preliminary studies show a possibility of using the special design of DPF with heat recovery system. The paper presents results obtained from simulations based on one-dimensional model of such system and analysis of increasing the heat recovery ratio by change of geometry of DPF. The gas heat exchange formulas between DPF and the heat exchange model are partly included in the paper. The preliminary results of calculations show the possibility of increase of exhaust gases in front of DPF about 20%, which enables a continuous regeneration of DPF. Heat recovery ratio is depends on soot combustion rate on the wall of DPF monolith. The method enables to recover some part of energy which is lost in the conventional DPF. The paper is a part of further work in European project FP6 IPSY.
Źródło:
Journal of KONES; 2010, 17, 1; 273-281
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of the combustion process in the electronically controlled marine diesel engine
Autorzy:
Kluj, S.
Powiązania:
https://bibliotekanauki.pl/articles/243056.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
marine diesel engines
simulation
combustion engines
electronically controlled engines
Opis:
The introduction of the electronically controlled low-speed diesel engines has raised a number of new problems - caused mainly by the influence of these electronic system settings on the combustion process. The wide set of the combustion press settings is now available for the chief engineers on the board of the ship and for the shipyard experts during the sea trials. This opens many new possibilities for the combustion process optimization but also causes the danger of the serious engine malfunction due to the improper settings. The paper presents the mathematical model of the electronically controlled low-speed marine diesel engine ant the special attention is paid to the available settings of the combustion process. The effective compression ratio, the injection timing and the exhaust valve setting can be adjusted in a similar manner like in the actual engine. The combustion pressure curves, the mean indicated pressure, the exhaust gas temperature can be observed when changing the combustion settings. The paper describes in detail the results of the several most typical simulations like change of the given combustion pressure increase, the change of the effective compression ratio, the change of the exhaust valve opening timing and the change of the maximum load setting.
Źródło:
Journal of KONES; 2014, 21, 4; 233-238
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vert particle filter test procedure and quality standard for new and in-use diesel engines
Autorzy:
Mayer, A.
Czerwinski, J.
Kasper, M.
Leutert, G.
Heeb, N. V.
Ulrich, A.
Jaussi, F.
Powiązania:
https://bibliotekanauki.pl/articles/247808.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
internal combustion engines
diesel engines
ecology
filters
particulates
Opis:
A new approach is needed to test particle filters for retrofitting Diesel engines. Considering the toxicity of the particles as also the physical and chemical attributes of particle filters, the optimal scheme is to test the components themselves independent of the deployment. That scheme ensures the highest effectiveness with least effort. It also enables evaluation of worst-case situations and assesses the hazards of secondary emissions. The Swiss standard SNR 277 205, which mandates the VERT test procedure, is a first step in that direction. The solution is derived from the physics of the filter media. The filtration of fine particles essentially depends on the particle size and the space velocity. The attributes of the emitting engine are only insignificantly relevant. Hence the physics and chemistry of particle filters can be investigated independent of the engine and its deployment duty. This concept facilitates a very thorough investigation of the size-dependent filtration, aging susceptibility, secondary emissions and extreme situations. Filter systems, which pass this detailed test, perform equally well in every retrofit configuration. This filter test concept was implemented 1998 in the VERT project and is successful for assessing retrofltting [4]. VERT approved fllter systems are already deployed in the Low Emission Zones of Europe, North and South America.
Źródło:
Journal of KONES; 2010, 17, 4; 313-322
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental test of common rail diesel engine supplied with diesel fuel - rape seed oil mixtures
Autorzy:
Klimkiewicz, M.
Mruk, R.
Oleszczak, P.
Powiązania:
https://bibliotekanauki.pl/articles/246559.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
Diesel engines
common rail
biofuels
rapeseed oil
Opis:
In the next few decades, the resources of oil will be depleted. From the other hand, growing market and usage of oils cause increase of oil price. Additionally, only some countries have oil deposits large enough to be independent from foreign suppliers. All these reasons show need for searching and development of new fuels, which can replace traditional ones produced from oil. One of the solutions for Diesel engines are bio-fuels produced from various vegetable oils like rapeseed, coconut or palm oil. Nowadays, the majority of new Diesel engines are equipped with Common Rail fuel injections system. It enables to achieve higher power of the engine, lower emissions and lower fuel consumption. This suggests that the Common rail system should be also utilized in Diesel engines supplied with bio-fuels, produced from various plants, as it was mentioned above. However, the bio-fuels have some properties much different from those of conventional Diesel fuel, for example they usually have significantly higher viscosity. In consequence, the fuel supply and fuel injection systems require some modifications. The paper presents results of the experimental test of Common Rail Diesel engine supplied with four fuels: standard Diesel fuel, rapeseed oil and two mixtures of these fuels: 70 percent of Diesel with 30 percent of rape seed oil and 50 percent of Diesel fuel with 50 percent of rape seed oil. For the research, a new test bench was built in Faculty of Production Engineering, Warsaw University of Life Sciences. The main element of the test bench is one cylinder, direct injection engine Farymann Diesel 18W. Originally, the engine was equipped with mechanical Bosh direct injection system, which was replaced with Common Rail system. The test bench enables measurements of various parameters: torque, pressure inside the cylinder, temperature of cooling water and exhaust gases, emissions etc. The tests of the modified engine were conducted with use of several types of piston and injector.
Źródło:
Journal of KONES; 2012, 19, 3; 213-224
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of chosen parameters of water fuel microemulsion on combustion processes, emission level of nitrogen oxides and fuel consumption of CI engine
Autorzy:
Jankowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/247478.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engines
combustion process
ecology
emulsion
microemulsions
Opis:
The microemulsion is the emulsion with dimension of molecules approx. micrometre and smaller. Such microemulsion of water and diesel oil creates new quality and lets on obtainment ecological and economic of effects, as well as eliminates the disadvantageous influence common emulsions, or unprofitable effects of the injection of water to inlet system of the engine, direct to combustion chambers, as well as the sequential injection of water direct to combustion chambers. The essence of apply of the microemulsion is also improve catalytic influence of small molecules of water on combustion process, what, beside decreasing temperature combustion gases, influences both emission level components of toxic combustion gases, as and the level of the specific fuel consumption. The paper presents different ways of microemulsion production, novel way of microemulsion production, which does not demand apply of mixers and suffers obtainment of microemulsion with the volumetric content of water in diesel oil do 40% under conditions of laboratory and stabile the microemulsion with content of water in diesel oil to 25%. Results of laboratory research involving basic parameters of the microemulsion and engine researches with measurements emission ingredients of toxic exhaust gases and fuel consumptions are presented involving basic parameters of the microemulsion and engine researches with measurements emission ingredients (NOx, soot, fuel consumption) of toxic exhaust gases and fuel consumptions are presented in the paper.
Źródło:
Journal of KONES; 2011, 18, 4; 593-600
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Transestrification of biofuel, yes but why?
Autorzy:
Sitnik, L. J.
Powiązania:
https://bibliotekanauki.pl/articles/242003.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
diesel engines
fuels
alternative fuels
biofuel
Opis:
This paper presents a novel way of utilizing alcohols as fuels for a diesel engine. It is proposed to use heavy alcohols as a mix with vegetable oils and conventional diesel fuel. It is presented the another way to use alcohols. Namely, the use of heavy alcohols as a solvent for vegetable oil (named the biomix or BM) and after the obtainment of the thickness, which would be approximate to diesel fuel, mixing the biomix with diesel fuel to obtained biomix diesel (BMD). This solution will be shown for example with butanol as heavy alcohol, rape oil as vegetable oil and conventional diesel fuel. The investigations are carried out with a simple diesel engine on the engine test bed. Main parameters of engine (power output, torque, specifically fuel consumption) and the main exhaust gas component (in this case CO, NOx, PM) will be investigated. There were better results achieved than one expected. Opposed to existing experiences, the maximum of power output and the torque of engine are higher in the whole range of the rotatory speed of the engine crankshaft when the engine biomix diesel (BMD) is reinforced. The addition of the component biomix to fuel influences the specific fuel consumption. Generally with the larger part of the component biomix the specific fuel consumption grows. Because the power of engine also grows up one should expect that in exploitation the specific fuel consumption should not increase. Transestrification process in the proposed solution does not appear. This has large economic meaning. The investment amount (the transestrification plant) is not necessary. The power consumption to get fuel is lower. Vegetable oils are fully used (glycerine is not produced). BMD has stable parameters. The usage of existing infrastructure to this transportation is enough. Very important is that this fuel could be used to reinforce old, existing now and the future diesel engines. The production of butanol is known. It will be interesting to use for the production an electrolysis process, especially in the proposed new plant where the electrolysis process is connected with the process to get the electrical energy from byproducts of electrolysis (i.e. hydrogen and oxygen) in the fuel cell. It seems to be more efficient. The possibility to get butanol from ethanol gives a very good perspective for the use of ethanol from today's overproduction and moreover without the essential change of infrastructure.
Źródło:
Journal of KONES; 2008, 15, 4; 537-544
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Real road tests - exhaust emission results from passenger cars
Autorzy:
Merkisz, J.
Powiązania:
https://bibliotekanauki.pl/articles/245491.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
exhaust emission
road tests
Diesel engines
diesel particulate filters
Opis:
The paper presents the results of on-road exhaust emission tests of passenger car fitted with diesel engine, and a DPF (diesel particulate filter). Under such conditions the author could determine the actual vehicle emissions. The tests were performed on a road portion of a fifty kilometres or so - these tests provide information on the on-road emissions and are a basis for their ecological evaluation. For the measurement of the exhaust emissions the authors used a portable exhaust emissions analyzer SEMTECH DS by Sensors Inc. The analyzer measured the concentration of the exhaust components at the same time measuring the exhaust mass flow. The measurements of the particulate matter (mass) were done with the use of particle analyzer by AVL. The obtained data were used to calculate the relations that characterize the influence of the dynamic engine parameters on the exhaust emissions. These properties were taken into account indirectly using the whole range of speeds and accelerations of the vehicle (engine speeds and loads of the engine) for the preparation of the matrices of the emissions rate. The used data were averaged within individual speed and acceleration ranges thus obtaining the characteristics of the share of operation in individual ranges and the characteristics of the emission matrices of the individual emission components. The above results served for defining of the emission level indicator of the vehicles that can be used for classification of vehicle fleet in terms of their emission level.
Źródło:
Journal of KONES; 2011, 18, 3; 253-260
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aging processes of biodiesel and biodiesel/diesel fuel blends
Autorzy:
Jankowski, A.
Baczewski, K.
Powiązania:
https://bibliotekanauki.pl/articles/246930.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engines
biofuels
FAME
fuel aging
emissions
Opis:
There has been increasing interest in recent years in the use of biodiesel as a substitute for petroleum-based diesel fuel. Fatty acids methyl esters (FAME) in a pure form are applied as a biodiesel B100 or as blends with diesel fuels named as the B10 biodiesel, the B20 biodiesel etc. FAME is susceptible to oxidation and to changes of other essential parameters during aging processes, which have an essential influence the NOx emission. Change of biodiesel parameters results in deterioration of fuel working properties and in increase of the NOx emission level. The increased NOx emission level is accompanied with high viscosity. Experiments with the PDPA laser-equipment showed that high content of biodiesel in a fuel increases the Sauter Mean Diameter (D32) of a fuel spray. The Sauter Mean Diameter increases with time of the aging process of biodiesel, what additionally can unfavourably influence the level of emission of exhaust gases. The research results of samples of aging processes of Rapeseed Methyl Ester (RME) accomplishing requirements of the EN 14214 European Biodiesel Standard, diesel fuel accomplishing requirements of the EN 590 (for based diesel fuel and blends of based diesel fuel and RME containing 1%, 5%, and 20% RME) are presented in the paper. Determination of influence of the fuel properties and the aging process on the acid number, kinematic viscosity, cloud point, cold filter plugging point, and pour point of fuel samples was an aim of performed research, as well the aging RME effect on elastomers comparatively with fresh RME. The process of fuel samples aging was enforced by the daylight (sun) effect, air, the elevated temperature and water. Fuel samples were aged in laboratory conditions during 15 and 60 weeks. Then the changes of fuels properties with relation to the same properties in initial conditions were determined. The water presence intensifles the process of the RME aging, especially in longer contact. An essential novel aspect of the paper is a relation determined between changes of biodiesel properties during aging and the NOx emission level that is connected mostly with increased viscosity. Rise of viscosity increases size of droplets of spray ed fuel, which results in increased emission level. Prevention of viscosity changes is an efficient way of the NOx emission decrease.
Źródło:
Journal of KONES; 2010, 17, 2; 167-180
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Some aspects using of micro emulsion fuel-water for supply of combustion engines
Autorzy:
Jankowski, A.
Sowa, K.
Zabłocki, M.
Powiązania:
https://bibliotekanauki.pl/articles/245346.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engines
combustion processes
ecology
emulsion
microemulsions
Opis:
The emulsion is a mixture of two or more insoluble liquids. Microemulsion is the emulsion with particles dimension in a range of one micrometer and smaller. Such a microemulsion of water and diesel fuel will create a novel quality and allows one to simultaneously achieve environmental and economic effects, as well as eliminate the adverse impact of normal emulsions, or adverse effects of water injection into the engine intake system or directly into the combustion chamber, as well as the sequential injection of water directly into the combustion chamber. Application of microemulsion of water and diesel to fuel diesel engine positively affects the combustion process through the catalytic impact of microparticles of water and to improve the process of preparation of the microemulsion injection into the combustion chamber as a result of water microparticles microexplosions. This article presents the investigation results of an internal combustion engine fuelled by an emulsion of water and diesel fuel and also fuelled by emulsion of FAME and water. It therefore seems appropriate to a strong increase in the degree of dispersion of water droplets in the emulsion by applying the methods to obtain the size of water droplets on nanometric range. This should dramatically improve both the stability of emulsion and its influence on the chemical effects of combustion in diesel engine. The performed analysis and investigation is the first stage of work, which is aimed to reduce emissions of PM and NOx simultaneously. It seems that the simultaneous reduction in emissions is possible through the usage of a stable emulsion, i.e. water-fuel microemulsion.
Źródło:
Journal of KONES; 2009, 16, 4; 531-538
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heat release characteristics in combustion chamber of CI engine
Autorzy:
Jankowski, A.
Lagowski, P.
Slezak, M.
Powiązania:
https://bibliotekanauki.pl/articles/244001.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
internal combustion engines
diesel engines
combustion processes
heat release
Opis:
On the basis of the internal heat balance of CI engine with direct fuel injection, the quantity of heat transported during the combustion process from the combustion zone was determined. The real indicator diagrams are the bases for determination of the heat release Characteristics during the combustion process and making up of the internal heat balance. These diagrams were worked out for the engine fuelled with diesel oil for three sets of the injection timing and for work of the engine according to the full load engine Characteristics, and the load Characteristics taken at the engine speedb for the maximum engine torque. Tests with the three different injection timing were carried out. Tests with the load characteristics of the compression-igniting engine for five values of the power were carried out. The pressure in the cylinder of the engine during combustion process was recorded by means of liąuid cooled a piezo-electric quartz sensor with a load amplifier. Characteristics of heat release depended on the composition, temperature and the mol quantity of the working charge in the cylinder during the combustion process. Characteristics of the heat release were determined with the use of the novel calculation program. The program was worked out by authors at the assumption that the process of complete combustion was finished at the moment of the opening of the engine exhaust valve. For purpose of simplification calculation of the quantity of heat lost into the cooling system, the radiation, dissociation and incomplete combustion, were assumed to change during the combustion process in a linear way.
Źródło:
Journal of KONES; 2010, 17, 3; 155-164
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problems of determining mean indicator pressure of piston combustion engines from developed indicator diagrams
Autorzy:
Monieta, J.
Powiązania:
https://bibliotekanauki.pl/articles/244070.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
marine diesel engines
indicator diagrams
mean indicated pressure
Opis:
The paper presents methods for processing and analysis of in-cylinder pressure course in the combustion chamber of marine engines. In literature are described determinate methods ofmean indicator pressure from closed diagrams, with are but rarely recorded than developed diagrams. There have been showed on limitations occurrence at measurements fast-changed pressures of marine diesel engines in operating conditions and measuring errors the attendants. Mean indicated pressure determined from the indicated timing or angular pressure courses in the cylinders is still a reliable diagnostic symptom. The paper presents too the results of experimental measurement of in-cylinder pressure signals, medium speed marine engines with application resistive sensor and using the photo-optical sensor of crankshaft position, and without the marker position of the crankshaft. Not always possible to altach the marker for the position of the crankshaft, and even there is no way of stopping the engine when you need to diagnose it. The top dead centre of the piston can be determined then analytically. The work developed a method of determining the mean indicated pressure of the developed indicator diagrams. Based on calculations ofmean indicator pressure made many of diagnosis of the medium speed marine diesel engines in the operating conditions.
Źródło:
Journal of KONES; 2010, 17, 3; 301-306
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efficiency of diesel engine fuelled with biofuels of second generation biox
Autorzy:
Struś, M.
Rewolte, M.
Rogula, J.
Powiązania:
https://bibliotekanauki.pl/articles/243380.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
biofuels
Bioxdiesel
Diesel engines
engine test
drive test
Opis:
Paper presents schematic description of the research covering production mechanism of Fatty Acid Ethyl Esters (FAEE) from waste vegetable and animal fats, which are creating a base for multi-component fuel BIOXDIESEL as well as results of physical, chemical analysis and results of engine and vehicles tests. The characteristic of wasted material used for production of fatty acid ethyl esters is showed. Cybernetic chain of biofuel BIOXDIESEL, system analysis and structure and scheme of the chemical reaction of Ethanol esterification of fatty acids is presented. Basic properties of exemplary BIOXDIESEL and Diesel fuel were compared. Caloric values of investigated BIOXDIESELS are shown. Mixtures of the BIOXDIESEL fuels with various composition have been tested and compared with Diesel fuel during engine tests on the engine test bench, vehicle test dyno and drive tests. The diesel engines of Fiat 1.3 Multijet, Mercedes300D, Landrover and ADCR compression ignition engine were tested with biofuels. Functional schema of the measurement set up is described. Cyclodynes obtained during testing of the ADCR engine fuelled with Diesel and BIOXDIESEL fuels with their centres of gravity are presented. Obtained and described results in the form of tables and graphs can be summarized with conclusions, that the performance of engines fuelled with BIOX-DIESELS is similar to engines fuelled with Diesel fuel.
Źródło:
Journal of KONES; 2015, 22, 4; 311-317
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Particle filter test procedure and quality standard for diesel engines
Autorzy:
Mayer, A.
Czerwinski, J.
Kasper, M.
Leutert, G.
Heeb, N.
Ulrich, A.
Jaussi, A.
Powiązania:
https://bibliotekanauki.pl/articles/242255.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
diesel engines
particle filters
quality air standards
air pollution
Opis:
A new approach is needed to test particle filters for retrofitting Diesel engines. Considering the toxicity of the particles as also the physical and chemical attributes of particle filters, the optimal scheme is to test the components themselves independent of the deployment. That scheme ensures the highest effectiveness with least effort. It also enables evaluation of worst-case situations and assesses the hazards of secondary emissions. The Swiss standard SNR 277 205, which mandates the VERT test procedure, is a first step in that direction. Occupational health specialists have studied the toxicity of ultraflne particles for more than 100 years. Extremely toxic are the particles intruding into the lung. Larger particles, which are always naturally present, are intercepted in the upper respiratory paths. The body then expels these larger particles rapidly via the mucus and cilia. The new manmade particles less-than l mi m, however massively intrude into the fine pulmonary alveoli, which do not have the cleansing mechanism. The targeted efficiencies for evaluating modern filters are evident from the progress achieved. Many filters have filtration rates exceeding 99.9%, albeit the directives [4] only require 97%.
Źródło:
Journal of KONES; 2009, 16, 2; 305-314
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania wstępne stanu technicznego niedoładowanego silnika okrętowego na podstawie pomiarów parametrów procesów gazodynamicznych spalin w kanale wylotowym
Preliminary investigation of technical working spaces in marine not loaded engines based on measurements of the gas dynamical parameters inside exhaust channel
Autorzy:
Zacharewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/222672.pdf
Data publikacji:
2011
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
okrętowe tłokowe silniki spalinowe
diagnostyka
marine diesel engines
diagnostics
Opis:
W artykule przedstawiony jest opis silnika pomocniczego LEYLAND typu SW400 zainstalowanego na stanowisku laboratoryjnym w Akademii Marynarki Wojennej. Dokonano analizy możliwości realizacji pomiarów parametrów gazodynamicznych w kanale spalin wylotowych, przedstawiono możliwości systemu pomiaru i rejestracji parametrów szybkozmiennych MA2005 oraz sposób jego wykorzystania w ocenie stanu technicznego przestrzeni roboczych silnika. Dalszą część artykułu stanowią wyniki badań wstępnych prowadzonych na silnikach typu SW400.
The paper presents a description of auxiliary engines SW400 installed in the laboratory of Polish Naval Academy, an analysis of possibility to measure gas dynamical parameters of an exhaust in a discharge channel, capabilities of the system to measure and register fast changing parameters MA2005 and the way to use the system to estimate the technical condition of engine working spaces area. It also includes the results of preliminary investigations carried out on engine SW400.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2011, R. 52 nr 4 (187), 4 (187); 125-132
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Particulate matter emission reduction from marine diesel engines by electrohydrodynamic methods
Autorzy:
Sobczyk, Arkadiusz T.
Jaworek, Anatol
Marchewicz, Artur
Krupa, Andrzej
Czech, Tadeusz
Śliwiński, Łukasz
Charchalis, Adam
Powiązania:
https://bibliotekanauki.pl/articles/241550.pdf
Data publikacji:
2019
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
exhaust gases
marine diesel engines
particulate matter
PM
scrubber
Opis:
Particulate matter (PM) and gaseous compounds (SO2, NOx, VOC) emitted by diesel engines causes serious global environmental problems and health impact. Despite numerous evidences about the harmfulness of diesel particles, the PM emission by diesel engines used by ships, cars, agricultural machines, or power generators is still unregulated, and the efficient removal of PM from diesel exhausts is still the major technological challenge. In order to comply with the International Maritime Organization regulation, the NOx emission is reduced by using selected catalytic reactor, and sulphur oxide emission has been reduced by using fuels of low sulphur content. However, both of those measures cannot be used for the reduction of PM emission produced during combustion of marine fuels. The lack of appropriate regulations results from insufficiently developed technology, which could remove those particles from exhaust gases. Conventional scrubbers currently available on the market remove only sulphur oxide with required collection efficiency, but the collection efficiency for PM2.5 is below 50%. The article discusses the technical means used for the removal of PM from marine diesel engines via applying electrohydrodynamic methods, in particular electrostatic agglomeration, as a method of nanoparticles coagulation to larger agglomerates, which could operate in two-stage electrostatic precipitation systems, and electrostatic scrubbers, which remove particles by electrically charged water droplets. The experimental results were obtained for a 2-stroke 73 kW diesel engine fuelled with marine gas oil (MGO). The agglomerator allowed increasing the collection efficiency from diesel exhausts for PM2.5 particles by about 12%, compared to electrostatic precipitator operating without agglomerator, and the total mass collection efficiency was above 74%. The collection efficiency of electrostatic scrubber was higher than 95wt.%. The advantage of using the electrostatic scrubber is that it can also reduce the SO2 emission by more than 90%, when HFO is used.
Źródło:
Journal of KONES; 2019, 26, 3; 203-210
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of alkalinity changes in lubricating oils used in marine diesel engines
Autorzy:
Młynarczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/242269.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
marine diesel engines
total base number
refilling process
Opis:
As the time is passing, lubricating oil in marine engine lubricating oil system loses its quality because of oil deterioration process. Lubricating oil quality influences the wear of tribological system elements. The total base number (TBN) is one of the most important oil quality properties. During operation of diesel engines the TBN decreases as alkaline additives are exhausted mainly through neutralization offuel burning acid products. So as to improve lubricating oil properties an engineer uses some maintenance methods. One of these methods is refilling process. The paper presents theoretical researches of total base number changes modelling at various lubricating oil refilling methods. Theoretical model of oil-deterioration process was worked out on the basis ofmass balance equation of total base number. The method of sofaing the problem, structural model of experimental unit, total base number change in case of constant refilling process, calculating example, total base number changes in PIELSTICK12PC2-5V engine oil versus parameter d, percentage changes of total base number in PIELSTICK 12PC2-5V engine oil versus parameter d are presented in the paper.
Źródło:
Journal of KONES; 2009, 16, 2; 329-335
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostic and measurement system dedicated for marine engines exploitatory attributes evaluation
Autorzy:
Charchalis, A.
Powiązania:
https://bibliotekanauki.pl/articles/248147.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engines
marine engines
engine diagnostic
exploitatory attributes evaluation
pressure sensors
Opis:
Modern way of machines' exploitation, due to their high level of constructional complication, requires certain level of supervising. That supervising is generally reduced to detection of pre-failure states and evaluation of machines’ single elements or components condition. In the frame of development of the research capacity of the Mechanical Faculty of Maritime Academy in Gdynia, has been developed the Exploitation Decision Aid System for marine engines exploitation, based on existing test bed with the marine diesel engine Sulzer AL 25/30. Modernization of the engine, significantly extended research and measurement capacity, what has resulted with improvement of quality, extension of the span, and acceleration of carried out research and development works in the domain of safety of exploitation and diagnostics of marine power plants. Above stated investments enables also an extension of the range of research and expertise related to engines' failures and exhaust gases emission pollution, in relation to broad spectrum of implemented fuels. The goal has been achieved in the way of the test equipment modernization including: effective pressure sensors, high pressure fuel sensors, monitoring and visualization of the engine systems' parameters, electronic indictors adopted to continuous operation at all cylinders in the same time, and high class decision aid computer equipment.
Źródło:
Journal of KONES; 2012, 19, 1; 35-40
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on purification of the marine engine oil with chemical interaction preparation
Autorzy:
Młynarczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/246370.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
marine diesel engines
lube oils
operating preparations
water
purification
Opis:
Owing to additives, the lubricating oils are characterized by constantly improving properties. Nevertheless, in extreme hard working conditions of the tribological systems (high pressures, velocities and temperatures, temporary lubricating lack during starting) the machine elements are not secured enough. In connection with the above mentioned the idea to introduce the additional substance - operating preparation into tribological systems (with the lubricating oils) was put forward. Now the chemical interaction preparations have the widest application. These preparations are characterized by big molecular weight and high thermal and chemical stability. Besides filtering, lubricating oils used in marine engines are purified. In connection with it the question arises if the operating preparations (which have higher density then oils and water) are able to join permanently with lubricating oil in order not to separate in the purifying process and what influence they have on lubricating oil ability to separate the water. The lubricating oil with operating preparation MOTOR LIFE PROFFESIONAL and water purifying research were presented in the article so as to answer the above questions. The test stand consisted of two WESTFALIA purifiers. One of these purifiers was working in UNITROL, the other in SECUTROL system. In the research the UNITROL system purifier was used. The research object was MARINOL RG 1240 lubricating oil used in marine diesel engines.
Źródło:
Journal of KONES; 2010, 17, 2; 341-349
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Speed irregularity characteristic of low speed, two-stroke marine diesel engine applied as vessels main propulsion
Autorzy:
Kowalak, P.
Powiązania:
https://bibliotekanauki.pl/articles/244760.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
marine diesel engines
combustion processes
speed measurement
speed irregularity
Opis:
The piston engine irregularity is a consequence of the uneven power supply from the engine units. As such, it contains valuable information about engines units working process. Unfortunately, it is strongly influenced by torsional vibration, resonance, and propeller behaviour. In order to better understand the speed irregularity phenomena the instantaneous speed was recorded and its characteristic against engine mean speed was developed. Some statistical parameters: standard error and deviation as well as variance were determined. The results were compared with propulsion plant torsional vibration. The presented results show that the irregularity of the long stroke engine's speed is strongly influenced by torsional vibration phenomena. The analyzed engine has a bared speed range 37-43 rpm. Exactly around that range, the speed irregularity reaches its maximum values of 18% of mean speed. The analysis can be considered as qualitative look into the phenomena. However even based on the presented analysis one can observe some practical inferences. The common type of electronic indicators is used to simplify the measurement by assuming that the shaft speed is equal in between the pickup pulses. In order to increase the accuracy of the indicated power determination the use of such instrument should be avoided in the speed range, which is a multiple number of the barred speed. Due to the fact that the shaft speed is irregular especially in the ranges where torsional resonance may occur the piston positioning (for example for TDC determination) purpose procedure should take it into account.
Źródło:
Journal of KONES; 2008, 15, 4; 263-268
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Właściwości silników spalinowych w aspekcie ochrony środowiska
Properties of diesel engines in the aspect of the environmental preservation
Autorzy:
Marciniak, Z.
Pielecha, I.
Powiązania:
https://bibliotekanauki.pl/articles/250317.pdf
Data publikacji:
2008
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
ochrona środowiska
silniki spalinowe
zanieczyszczenia
diesel engines
environment preservation
pollution
Opis:
Zwiększenie wymagań ochrony środowiska dotyczy coraz częściej szynowej trakcji spalinowej. Silniki lokomotyw spalinowych muszą obecnie spełniać coraz bardziej rygorystyczne normy emisji spalin. Możliwość spełnienia tych wymagań przez silnik spalinowy jest ograniczona. Zna.czącą rolę w tym aspekcie odgrywają układy oczyszczania spalin, które wraz z odpowiednią jakością paliw (zawielkością siarki) umożliwiają spełnienie limitów toksyczności spalin.
Źródło:
TTS Technika Transportu Szynowego; 2008, 5-6; 73-79
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Air Pollution Reduction and Environment Protection Using Methane Fuel for Turbocharged CI Engines
Autorzy:
Ghazal, O. H.
Powiązania:
https://bibliotekanauki.pl/articles/124055.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
air pollution
clean combustion
methane emissions
heavy-duty diesel engines
Opis:
The internal combustion engine is considered as one of the main sources for air pollution due to hydrocarbon fuel combustion. The increased land transport usage requires improvement of the engine efficiency and combustion process technology to reduce the engine emissions. A turbocharged engine and the gaseous fuel replacement are the green tools proposed by researchers to enhance fuel saving and emissions reduction. In this paper, both methods were investigated. The methane is a preferred gaseous fuel due to its lower carbon to hydrogen ratio, resulting in lesser HC and CO emissions. In this paper, a turbocharged compression ignition engine with methane/diesel dual fuel is simulated using professional GT-power code to investigate the effect of methane percentage in mixture on the engine performance and emissions. A turbocharged 6 cylinders compression ignition engine has been built and investigated. During the simulation, the methane/diesel ratios were varied from pure diesel with zero percent methane to 90% methane concentration by mass with 10% increment every run. The results show that the engine brake power and specific fuel consumption increased while the thermal efficiency decreased for lower CH4 concentration. For higher CH4 percentage, the brake power and thermal efficiency increased while specific fuel consumption decreased. Moreover, NO emission has 35% reduction compared to neat diesel fuel when 50% of methane was added to the mixture. Conversely, the CO and HC concentration increased when the methane ratio is less than 50% compared to neat diesel combustion. In general, the engine efficiency improved when methane was added to diesel fuel in compression ignition engine with turbocharger boost, resulting in lesser emissions and cleaner environment.
Źródło:
Journal of Ecological Engineering; 2018, 19, 5; 52-58
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Estimation of undesirable events in operation of bulk carriers
Autorzy:
Monieta, J.
Powiązania:
https://bibliotekanauki.pl/articles/245847.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
bulk carriers
functional systems
elements
adverse events
piston marine diesel engines
Opis:
This paper describes the introduced results of researches of undesirable events at one shipowner for a period of twelve years. The study included mostly merchant vessels bulk carriers and their significant objects. The ships were decomposed on functional systems and elements also divided them into of the navigation and machinery part. There was carried out a quantitative and economics analysis. In the economic analysis have been exchange rates accounted. Attempted classification of the causes of the event and its participation in material losses incurred. These events are also a threat to human life and health as well as the natural environment. One showed on methods and means of diagnostics as manner of limitation their sizes and results. The results should be useful in the design of diagnostic experiments to select the objects that should be subject monitored. The larges losses of adverse events were initiated in the functional systems: navigation, main drive and cargo. The most often adverse events are collisions. The most expensive vessel objects in the engine room proved to be reciprocating internal combustion engines for main propulsion and auxiliary. The investigations were conducted for all types of reciprocating internal combustion engines mounted on the test vessels. Combustion engines were operated under different external and internal conditions and were feed distillate and residual fuel oils.
Źródło:
Journal of KONES; 2013, 20, 2; 291-297
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Akusticeskie harakteristiki mnogodyrcatyh raspylitelej dizelej s predvaritelnoj obrabotkoj topliva
Acoustic characteristics of multipoint diesel injectors with preliminary fuel treatment
Autorzy:
Klyus, O.
Barsukov, S.
Bejger, A.
Osipowicz, T.
Puhov, V.
Powiązania:
https://bibliotekanauki.pl/articles/360285.pdf
Data publikacji:
2008
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
dizel
forsunka
predvaritelnaa obrabotka topliva
diesel engines
injector
preliminary fuel treatment
Opis:
The paper presents catalytic and thermal preliminary fuel treatment in the injector body of diesel engine, mathematical model of turbulizing process and results of laboratory research acoustic characteristics fuel injectors.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2008, 14 (86); 19-24
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling and evaluating piston slap-induced cavitation of cylinder liners in heavy-duty diesel engines
Autorzy:
Liu, Dong
Sun, Nannan
Zhu, Guixiang
Cao, Hengchao
Wang, Tie
Li, Guoxing
Gu, Fengshou
Powiązania:
https://bibliotekanauki.pl/articles/27312785.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
heavy-duty diesel engines
cavitation evaluation
dynamics model
liner acceleration
coolant pressure
Opis:
Cavitation erosion of cylinder liner seriously affects the operational reliability and service life of heavy-duty diesel engines. The accuracy of the modeling-based cavitation risk evaluation is limited by the unclear correspondence between cylinder liner vibration and coolant cavitation. This report is intended to investigate the correspondence between cylinder liner vibration and coolant pressure by combining vibration cavitation test, pressure gradient calculation, and visualization observation. The cavitation risk of the cylinder liner under the piston slap is quantitatively analyzed based on a nonlinear structural dynamics model that incorporates the piston-cylinder liner nonlinear collision, piston thermal deformation, and preload of cylinder head. The results show that the occurrence of cavitation will cause a nonlinear relationship between the cylinder liner acceleration and the coolant pressure. The engine under study has a high risk of cavitation when the cylinder liner acceleration exceeds 1189 m/s2. The difference in cavitation risk for each cylinder is related to the structural modal characteristics of the crankcase. In addition, the effect of piston-liner clearance and piston pin offset on the cavitation risk is investigated based on the dynamics model.
Źródło:
Eksploatacja i Niezawodność; 2023, 25, 3; art. no. 169644
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of injection pressure for fuel consumption and exhaust emissions in a dimethyl ether (DME) engine with a common rail type injection system
Autorzy:
Yanai, T.
Konno, M.
Sato, Y.
Oikawa, H.
Nozaki, S.
Powiązania:
https://bibliotekanauki.pl/articles/247403.pdf
Data publikacji:
2010
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engines
alternative fuels
DME
common rail
injection pressure
fuel consumption
emissions
Źródło:
Journal of KONES; 2010, 17, 2; 511-518
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiysis of propulsion for various types of ships in aspects of power required and fuel consumption during exploitation
Autorzy:
Charchalis, A.
Powiązania:
https://bibliotekanauki.pl/articles/242618.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
shipbuilding
calculation of propulsive marine power
hulls resistances of ship
diesel engines
Opis:
The paper presents comparative analysis of energetic possibilities of different ships with close parameters of displacement and operational ailing range, for selected type of main engine. Analysis is related to three types of ships, i.e. bulk carrier, tanker and container ship, with assumed displacement at level of 120 000DWT and typical for that ships sailing speed. The analysis concerns shipping route from Gdynia to Shanghai. First step of conducted analysis was based on elaboration of the list of contemporary similar ships for every class, their general dimensions, dimensional coefficients, and subsequently evaluation of hulls resistances using Holtrop – Mennen Method necessary for calculation of propulsive power, main engines’ selection, most convenient for every type of ship and calculation of trips durations and fuel consumptions. All calculations were done assuming typical cruising speed for considered types of ships, it means 25 knots for container ships and 15 knots for tankers and bulkers. Results of carried out calculations lets come to the conclusion that total time of trip duration of container ship is 1.5 times shorter and fuel consumption is 2.5 times higher comparing with tankers and bulk carriers going on the same trip. Taking under consideration constantly growing prices of heavy oil, that situation is inconvenient from economical point of view. Above facts explains general trend to reduce speed of container ships presented by almost all shipping companies. The way of speed’s reduction is decreasing of continuous power rate of main engine, what is related to necessity of blinding or dismounting some numbers of turbochargers. Hypothetic example of such operation and its impact at operational properties were analysed, and results showed, that exploitation parameters of the container ship begun closer to bulk carriers and tankers but could not achieve proper level of efficacy due to not optimal hull shape and engine characteristic.
Źródło:
Journal of KONES; 2015, 22, 4; 53-57
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The dynamic TDC assigning on the marine four stroke engines indication diagram
Autorzy:
Kowalak, P.
Powiązania:
https://bibliotekanauki.pl/articles/243233.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
marine diesel engines
combustion processes
power estimation
determination of piston's TDC
Opis:
Determination of the internal combustion piston engine 's indicated power is a complex task. A number of difficulties lead to lots of solutions utilized to increase the accuracy of the result. This paper reports on the experiments concerned with a four stroke engine's piston dynamic position determination. Although the paper is mostly concerned with the piston's TDC definition, the experimental methodology can be utilized in the entire piston movement determination. A specially developed measuring assembly and its working principle utilized in the experiment have been presented too. It allows the acquiring of a set of time-position coordinates. Based on the coordinates, the mathematical algorithm for dynamic piston positioning can be developed. As the piston movement was being observed from the crankcase side, the methodology proved to be relatively cheap and easier for installation, compared to proximity sensors installed in the cylinder head. The advantage of optical sensors and light pipes being used was reduction of the explosion risk in oil mist environment inside the crank case.
Źródło:
Journal of KONES; 2007, 14, 2; 259-266
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza statystyczna napraw samochodów z silnikami ZS na przykładzie firmy Diesel Service Adamczyk
Statistical analysis of diesel car repairs on the example of Diesel Service Adamczyk Companies
Autorzy:
Konieczny, L.
Adamczyk, B.
Adamczyk, G.
Powiązania:
https://bibliotekanauki.pl/articles/198407.pdf
Data publikacji:
2014
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
naprawa samochodów
analiza statystyczna
silniki ZS
car repairs
statistical analysis
diesel engines
Opis:
W ramach artykułu przestawiono analizy statystyczne rodzajów napraw realizowanych w analizowanej firmie obejmujące okres pięciu lat. Analiza jest oparta na bazie danych (SQL), w której zapisywane są wszystkie informacje dotyczące realizowanych zleceń. W ramach analiz określono strukturę zbioru naprawianych pojazdów oraz przeprowadzono analizę najczęstszych usterek pojazdów.
The article presents a statistical analysis of car repair data gathered by an examined company over five-year time interval. It is based on a SQL database which contains information about all realized orders. The analysis defines the structure of the set of repaired car makes and additionally to find the most frequent vehicle defects.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2014, 85; 75-81
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Environmental Benefits of the SCR Systems: a Case Study of the Lublin City Transport
Autorzy:
Zielińska, K.
Haratym, A.
Powiązania:
https://bibliotekanauki.pl/articles/123515.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
MPK
Municipal Transport Company
SCR system
nitrogen oxides
heavy duty diesel engines
Opis:
Standards linked with the environmental protection and vehicles are increasingly restrictive. EURO VI standard and regulations define the acceptable limits for exhaust emissions of new vehicles sold. Because of that, Selective Catalyst Reduction systems are used in a new vehicles with the heavy-duty type engines. This paper presents a study of the SCR system in public transport vehicles of the Municipal Transport Company (MPK) in Lublin, Poland. The tests were performed to study the power consumption of the SCR (the urea applicator into the catalyst) and calculate the results per unit of fuel. The amount of fuel for the Solaris Trollino 12 trolleybus was estimated and the energy demand found was of the order of 343 kWh/year. This gives low diesel fuel consumption, i.e. only 34.3 litres per year. The study also shows a graph of the daily demand of energy by the SCR system in public transport vehicles.
Źródło:
Journal of Ecological Engineering; 2017, 18, 3; 202-207
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania wizualizacyjne jako metoda oceny parametrów wtrysku paliwa do silników o ZS
Visualization research as a method of parameters estimation of fuel injection for diesel engines
Autorzy:
Balawender, K.
Kuszewski, H.
Lejda, K.
Lew, K.
Powiązania:
https://bibliotekanauki.pl/articles/316052.pdf
Data publikacji:
2016
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
silniki wysokoprężne
badania wizualizacyjne
wtrysk paliwa
diesel engines
visualization research
fuel injection
Opis:
W artykule przedstawiono stanowisko oraz przykładowe wyniki badań wizualizacyjnych przebiegu procesu wtrysku wybranych paliw do silników o ZS. Stanowisko to zbudowano w oparciu o stół probierczy firmy Bosch EPS-815 ( z którego zaadoptowany został napęd pompy wysokociśnieniowej) oraz komorę wizualizacyjną o stałej objętości umożliwiającą realizację procesu rozpylenia paliwa. Rejestracji rozwoju strugi paliwa realizowano przy użyciu systemu AVL VisioScope.
The article presents the test stand and sample visualization results of injection process for selected fuels used in diesel engines. The test stand was built based on the Bosch EPS-815 test bench and the constant volume visualization chamber which allows the fuel spraying. From test bench the drive of high-pressure pump was adapted. Using the AVL VisioScope system the spray formation was recorded.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2016, 17, 6; 761-765
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Principy organizacii rabocego processa agregatov kaskadnogo szatia i nekotorye napravlenia ih primenenia
The principle organization of work process unit of cascade compression and its application
Autorzy:
Klyus, O.
Krajnuk, A.
Alekseev, S.
Powiązania:
https://bibliotekanauki.pl/articles/360223.pdf
Data publikacji:
2008
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
dizel
agregat kaskadno-teplovogo szatia
diesel engines
unit of cascade-thermal compression
Opis:
The paper presents principle working unit of cascade thermal compression with different application and main characteristics.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2008, 14 (86); 25-29
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Plasma technology to remove NOx from off-gases
Autorzy:
Pawelec, Andrzej
Chmielewski, Andrzej G.
Sun, Yongxia
Bułka, Sylwester
Torims, Toms
Pikurs, Guntis
Mattausch, Gösta
Powiązania:
https://bibliotekanauki.pl/articles/2055686.pdf
Data publikacji:
2021
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
electron beam
flue gas treatment
marine diesel engines
NOx
SOx
ship emissions
Opis:
Operation of marine diesel engines causes signifi cant emission of sulphur and nitrogen oxides. It was noticed worldwide and the regulations concerning harmful emissions were introduced. There were several solutions elaborated; however, emission control for both SOx and NOx requires two distinctive processes realized in separated devices, which is problematic due to limited space on ship board and high overall costs. Therefore, the electron beam flue gas treatment (EBFGT) process was adopted to ensure the abatement of the problem of marine diesel off-gases. This novel solution combines two main processes: fi rst the fl ue gas is irradiated with electron beam where NO and SO2 are oxidized; the second stage is wet scrubbing to remove both pollutants with high efficiency. Laboratory tests showed that this process could be effectively applied to remove SO2 and NOx from diesel engine off-gases. Different compositions of absorbing solution with three different oxidants (NaClO, NaClO2 and NaClO3) were tested. The highest NOx removal efficiency (>96%) was obtained when seawater-NaClO2-NaOH was used as scrubber solution at 10.9 kGy dose. The process was further tested in real maritime conditions at Riga shipyard, Latvia. More than 45% NOx was removed at a 5.5 kGy dose, corresponding to 4800 Nm3 /h off-gases arising from ship emission. The operation of the plant was the first case of examination of the hybrid electron beam technology in real conditions. Taking into account the experiment conditions, good agreement was obtained with laboratory tests. The results obtained in Riga shipyard provided valuable information for the application of this technology for control of large cargo ship emission.
Źródło:
Nukleonika; 2021, 66, 4; 227--231
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Method of evaluation of the technical condition of the diesel-electric unit
Metoda oceny stanu technicznego okrętowego zespołu spalinowo-elektrycznego
Autorzy:
Zacharewicz, Marcin
Kniaziewicz, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/328441.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
marine diesel engines
diagnostic
diesel-electric unit
okrętowy tłokowy silnik spalinowy
diagnostyka
zespół spalinowo-elektryczny
Opis:
The article presents an innovative method of evaluating technical condition of marine diesel engines driving electric power generator. The presented method is based on measurements of the phase-to-phase voltage of the synchronous generator and on measurements of the acceleration of the injector needle. The basis for the method is an assumption that the shapes of the waveforms of the phase-to-phase voltage of the generator include information on fluctuations of the angular velocity of the engine crankshaft. Consequently, these fluctuations depend directly on the course of the working process occurring in the engine cylinders. The vibrating signal is used to synchronize the shapes of the voltage waveforms with the engine working process.
W artykule przedstawiono nowatorską metodę oceny stanu technicznego okrętowych tłokowych silników spalinowych o zapłonie samoczynnym napędzających prądnice. Prezentowana metoda bazuje na pomiarach napięcia międzyfazowego prądnicy synchronicznej oraz na pomiarze przyspieszeń iglicy wtryskiwacza. Podstawą metody jest założenie, że przebiegi napięcia międzyfazowego prądnicy zawierają informację o fluktuacjach prędkości kątowej wału korbowego silnika. Natomiast fluktuacje te zależą bezpośrednio od przebiegu procesu roboczego realizowanego w cylindrach silnika. Sygnał drganiowy wykorzystywany jest do synchronizacji przebiegów napięcia z cyklem roboczym silnika.
Źródło:
Diagnostyka; 2019, 20, 2; 113-119
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie zużycia wybranych elementów okrętowych średnioobrotowych silników o zapłonie samoczynnym zasilanych paliwami pozostałościowymi
Wear investigations of selected elements of medium speed diesel engines feeded with residual fuels
Autorzy:
Monieta, J.
Powiązania:
https://bibliotekanauki.pl/articles/189028.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
silniki okrętowe
wybrane elementy
zużycie eksploatacyjne
marine diesel engines
selected elements
operating wear
Opis:
W pracy przedstawiono wyniki badań wybranego obiektu, elementów i węzłów tribologicznych w aspekcie procesów zużycia. Obiektami badań były średnio-obrotowe silniki produkowane na licencji firmy Sulzer. Wśród badanych typów silników ten zasilany paliwami pozostałościowymi podlegał intensywnemu zużyciu. Paliwa te zawierają znaczne ilości siarki, wody oraz odznaczają się dużą liczbą Conradsona. Badania zużycia prowadzono w naturalnych warunkach eksploatacji. Opisano także warunki, w których eksploatowane były badane silniki, gdzie występowały często niesprzyjające warunki tropikalne. Stwierdzono istotne zużycie czopów wału korbowego, tulei cylindrowych, tłoków i głowic. Intensywne zużycie wynika z konstrukcji silnika, w którym system smarowania tłoków i tulei oraz łożysk wału korbowego nie jest rozdzielony. Badania zużycia prowadzono głównie z zastosowaniem biernej obserwacji, pomiarów geometrycznych, analizy obrazów oraz z zastosowaniem biernych i bierno-czynnych eksperymentów diagnostycznych. Problemem w badanych silnikach oprócz intensywnego zużycia materiałów metalowych było tworzenie się osadów. Celem badań była również identyfikacja rodzajów zużycia.
The paper presents the results of the selected object, the elements and of tribological systems in the aspect of wear processes. The objects of research were medium speed engines produced under license from Sulzer. Among the tested objects were the types of engines powered by residual fuels subject to intensive wear. These fuels contain significant amounts of sulphur and water and have a large number of Conradson carbon residue. The wear investigations were performed under natural conditions. The paper also describes the conditions under which the test engines operate, which are often unfavourable tropical conditions. A significant wear of crank pins, cylinder liners, pistons, and cylinder heads were indicated. Intensive wear results from engine design, in which the lubrication system of pistons and sleeves and bearings of the crankshaft is the same. The wear investigations were carried out by applying passive observation, geometrical measurements, and analysis of images, and with applying passive and passive-active diagnostic experiments. The inspected engines showed intensive wear of metal materials and the formation of deposits. An identification of types of the wear was also a purpose of the research.
Źródło:
Tribologia; 2014, 2; 111-121
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sterownik do badań silników z systemem wtrysku Common Rail
Research Programmer for Common Rail Injection System
Autorzy:
Stelmasiak, Z.
Knefel, T.
Larisch, J.
Powiązania:
https://bibliotekanauki.pl/articles/157133.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
silnik o zapłonie samoczynnym
common rail
sterownik silnika
Diesel engines
electronic control unit
Opis:
W Katedrze Silników Spalinowych i Pojazdów Akademii Techniczno-Humanistycznej w Bielsku-Białej opracowano i wykonano sterownik do badań silników o zapłonie samoczynnym wyposażonych w układy zasilania typu Common Rail. W niniejszej publikacji przedstawiono opis sterownika oraz na przykładzie menu jego sposób działania i możliwości badawcze. Sterownik umożliwia na pracującym silniku zmianę kąta wyprzedzenia i ciśnienia wtrysku, wielkości dawki i jej podział na pięć dawek częściowych o dowolnym profilu wtrysku. Umożliwia to prowadzenie badań związanych z analizą i optymalizacją procesu spalania w silniku. W publikacji przedstawiono również wybrane algorytmy sterowania silnika. W oparciu o doświadczenia zdobywane na hamowni silnikowej sterownik ten jest w dalszym ciągu rozwijany w zakresie optymalizacji procedur strategicznych, operacyjnych i regulacyjnych, których celem jest wdrożenie elektronicznego układu sterującego dla zastosowań trakcyjnych.
In the Chair of Internal Combustion Engines and Vehicles of the Technical University in Bielsko-Biała the programmer for examina-tions Diesel engines equipped with Common-Rail was made. It is presented in the paper. Operation and options of the controller are showed on the example of the menu. Executed and put into practice controller of the system Common-Rail makes it possible to examine and analyse the combustion process in the engine. The aim of the tests there is the change of the character of the dose of the injection and other parameters of the injection. Some algorithms of the control of the engine speed were also restated. Basing on this experience the engine test bench controller has been developed, allowing the optimization of strategy, operation and regulating procedures. Next the optimal solution of the electronic steering setup could be put into practice also for traction applications. Device parameters and features of the driver are shown on the example of the menu.
Źródło:
Pomiary Automatyka Kontrola; 2010, R. 56, nr 3, 3; 217-220
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pozytywne skutki zastosowania silników Diesla w lotnictwie
Positive effects of Diesel engine use in aviation
Autorzy:
Pągowski, Z. T.
Powiązania:
https://bibliotekanauki.pl/articles/212381.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
silniki lotnicze Diesla
paliwa lotnicze
General Aviation
UAV
aviation Diesel engines
aviation fuels
Opis:
Thielert Aircraft Engines GmbH certyfikował w maju 2002 roku lotniczy silnik Diesla Centurion 1.7 w Europie przez EASA, a w rok później przez FAA w USA. Liczba użytkowanych silników Diesla zasilanych paliwem lotniczym Jet Al, trakcyjnym paliwem dieslowskim i syntetycznymi biopaliwami lotniczymi wzrasta. Wprowadzono po wielu perturbacjach do roku 2012 około 3500 silników Diesla tej firmy. Właściwości nowoczesnego silnika Diesla w stosunku do klasycznego benzynowego silnika lotniczego Otto oraz jego certyfikacja zmieniły zasadniczo sytuację na rynku napędów w lotnictwie zmierzających do zastosowania jednego paliwa dla lotnictwa komercyjnego, General Aviation oraz bujnie rozwijającego się lotnictwa bezpilotowego (UAV). Autor dokonuje przeglądu dynamicznie zmieniającej się sytuacji na rynku napędów i paliw lotniczych.
The Thielert Aircraft Engines GmbH certified in May 2002 Air Centurion 1.7 Diesel engine in Europe by EASA, and a year later in the United States by the FAA. The number of exploited Diesel engines fueled by Jet Al, Diesel fuel and synthetic biofuels is increasing. After many perturbations about 3,500 Diesels were introduced till year 2012.The characteristics of modern Diesel compared to gasoline regular aircraft Otto engine and its certification considerably changed the market situation in aviation propulsion oriented to use one type of fuel for commercial aviation, General Aviation and vigorously developing unmanned aviation (UAV). The author reviews the current rapidly changing situation on the market of aviation propulsion and aviation fuels.
Źródło:
Prace Instytutu Lotnictwa; 2016, 3 (244); 385-392
0509-6669
2300-5408
Pojawia się w:
Prace Instytutu Lotnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie siły tarcia iglicy w korpusie rozpylacza wtryskiwaczy silników okrętowych przy obecności środków smarujących z uwzględnieniem zmian położenia
Research on the friction force of the needle in the nozzle body of marine diesel engines in the presence of a lubricating medium that account position changes
Autorzy:
Monieta, J.
Powiązania:
https://bibliotekanauki.pl/articles/187933.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
silniki okrętowe
rozpylacze wtryskiwaczy
siła tarcia
marine diesel engines
injector nozzles
friction force
Opis:
W artykule przedstawiono wyniki badań siły tarcia między iglicą a korpusem rozpylaczy silników okrętowych. Badano wykonane ze stali stopowej rozpylacze tłokowych silników spalinowych zasilanych olejem napędowym lub paliwem pozostałościowym. Do badań wybrano rozpylacze spośród eksploatowanych w naturalnych warunkach, w których stwierdzono stan niezdatności lub wymieniono je profilaktycznie. Badano rozpylacze przy obecności paliwa lub oleju o zbliżonych własnościach, jak również wykonano pomiary czasów wysuwania się iglic z korpusów rozpylaczy dla stopniowanych ich położeń w płaszczyznach względem osi podłużnej w korpusie rozpylacza. Wykonano pomiary geometryczne par precyzyjnych i badano wpływ wymiarów oraz błędów kształtu i położenia części prowadzących na wartości sił tarcia. Badano wpływ położenia kątowego iglicy względem korpusu rozpylacza i mierzono również luz średnicowy między korpusem a iglicą rozpylacza oraz badano jego wpływ na wartość maksymalnej siły tarcia. Badania siły tarcia przeprowadzono na dwóch stanowiskach, w zależności od jej wartości. Pierwsze z nich wykonane było we własnym zakresie do wyznaczania maksymalnej siły tarcia z wykorzystaniem obciążania siłami ciężkości, a drugie stanowisko przeznaczone było do badań wytrzymałości próbek na rozciąganie. Na wartość maksymalnej siły tarcia między korpusem i iglicą rozpylacza ma wpływ stan współpracujących powierzchni oraz ich wzajemne usytuowanie, zanieczyszczenia itp. Przeprowadzone badania miały na celu wyznaczenie składowej siły tarcia i/lub czasu wysuwania się iglicy w zależności od kąta obrotu iglicy w korpusie rozpylacza, od luzu, rodzaju zastosowanych środków smarowych oraz masy iglicy.
This article presents the results of the friction force between the needle and the nozzle body of marine diesel engines. Injectors made of the alloy steel of piston internal combustion engines fed with diesel oil or residual fuel were investigated. Injector nozzles from among the jets operated in natural conditions in which was found the state of unfitness or replaced preventively are investigated. Nozzles were tested in the presence of fuel oil or oil with similar properties, as well as measurements of ejection time choking the nozzle at different angles of the rotation respect to the longitudinal axis of the nozzle needle in the body. Geometrical measurements were made of precision pairs to investigate the effect of the dimensions and shape and location errors on the values of friction forces. The influence of the angular position of the needle tip relative to the body are investigated, and precise measurements of the diameter clearance between the frictional couple were taken to study its effect on the value of the maximum friction force. The research of the frictional forces was carried at two test stands, depending on its value. The first test stand was designed by the author for appointing the maximum using gravitational loading, and the second stand was intended to research the durability of samples to stretching. The value of the maximum force of friction between the body and the needle tip is influenced by the condition of mating surfaces and their mutual positioning, pollution, etc. The research aimed to determine the component of friction force and/or the time of the withdraw of the needle depending on the angle of the turnover of the needle in the nozzle body, clearance, kind, applied medium and masses of the needle.
Źródło:
Tribologia; 2012, 2; 41-57
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka gęstości czasowej silników spalinowych maszyn eksploatowanych w kopalniach węgla kamiennego
Characteristics of time density of diesel engines in the machines used in hard coal mines
Autorzy:
Kaczmarczyk, K.
Powiązania:
https://bibliotekanauki.pl/articles/199310.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniki Górniczej KOMAG
Tematy:
silniki spalinowe
charakterystyka gęstości czasowej
górnictwo
diesel engines
time density characteristics
mining industry
Opis:
Charakterystyka TD (Time Density), opracowana dla napędów spalinowych eksploatowanych w kopalniach węgla kamiennego, pozwala na sklasyfikowanie silnika i określenie reprezentatywnego cyklu badawczego oraz wagi poszczególnych faz tego cyklu. W artykule przedstawiono metodę sporządzania charakterystyk gęstości czasowej TD maszyn z silnikiem spalinowym oraz metody pośredniego i bezpośredniego określenia momentu obrotowego niezbędnego do sporządzenia charakterystyki TD.
Time Density Characteristics (TD), developed for diesel engines operating in hard coal mines enables classification of engine and determining the representative testing cycle and weight of each phase of the cycle. The method for preparation of TD characteristics of diesel engines as well as indirect or direct determination of torque indispensable for development of TD characteristics, is presented.
Źródło:
Maszyny Górnicze; 2015, 33, 2; 30-34
0209-3693
2450-9442
Pojawia się w:
Maszyny Górnicze
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowoczesne silniki Diesla : układ sterowania i zasilania paliwem
Modern Diesel engines : a control system and a fuel supply system
Autorzy:
Sochaczewski, R.
Wendeker, M.
Gęca, M.
Powiązania:
https://bibliotekanauki.pl/articles/315415.pdf
Data publikacji:
2012
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
silnik Diesla
silnik samochodowy
zasilanie paliwem
Diesel engines
motor-car engine
fuel feed
Opis:
Konieczność spełnienia norm emisji spalin przy jednoczesnym wzroście kosztów materiałów eksploatacyjnych, gdzie największą ich część stanowi koszt paliwa, zmuszają do opracowywania nowych rozwiązań z przeznaczeniem do zastosowania w konstruowaniu silników spalinowych. W artykule przedstawiono obecne oraz przyszłościowe rozwiązania stosowane konstrukcjach silników motoryzacyjnych. Dotyczą one procesu sterowania procesem spalania oraz konstrukcji wysokociśnieniowych układów wtryskowych.
Emissions standards and higher costs of consumables materials where the greatest part is fuel cost are forcing to develop new solutions to improve the construction of internal combustion engines. The paper overviews the current and future solutions used in automotive engine designs. They are related to the control of combustion and a design process of high-pressure injection systems.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2012, 13, 4; 158-165
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Marine diesel engine pistons instantaneous position experimental determination
Eksperymentalne wyznaczanie chwilowego położenia tłoka silnika okrętowego
Autorzy:
Kowalak, P.
Powiązania:
https://bibliotekanauki.pl/articles/258342.pdf
Data publikacji:
2007
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
okrętowy silnik spalinowy
szacowanie położenia
tłok TDC
marine diesel engine
diesel engines indication
piston TDC determination
Opis:
Przedstawiono eksperymentalne możliwości obserwacji ruchu tłoka poprzez skrzynię korbową silnika okrętowego. Wyznaczono charakterystyczne punkty położenia tłoka w czasie. opracowano metodę estymacji wystąpienia GMP tłoka na podstawie jego obserwowanych położeń. Zaproponowano model matematyczny umożliwiający szacowanie położenia dynamicznego GMP tłoka na podstawie obserwacji jego ruchu. Wykazano występowanie różnicy pomiędzy wystąpieniem GMP termodynamicznym, a GMP dynamicznym.
The experimental possibility of piston movement observation through the crankcase has been presented. The characteristic piston positioning points in the time domain have been determined. The piston TDC estimation methodology based on observed positioning points has been developed. A mathematic model for piston TDC estimation has been proposed. The difference between thermodynamic and dynamic TDC has been detected and presented.
Źródło:
Problemy Eksploatacji; 2007, 3; 113-120
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Researches of axially symmetrical model plasma reactor to cleaning diesel exhaust gas of particulates
Badania osiowo-symetrycznego modelowego reaktora plazmowego do oczyszczania spalin silnika o zapłonie samoczynnym z cząstek stałych
Autorzy:
Zawadzki, A.
Irzycki, A.
Kalina, P.
Snopkiewicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/242685.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
silniki spalinowe
silnik Diesla
reaktor plazmowy
oczyszczanie spalin
combustion engines
diesel engines
plasma reactor
exhaust gases purification
Opis:
The investigations were concentrated on axially symmetrical arrangements, which permit more convenient formation of electrostatic field and better practicability. The description of construction and results of preliminary investigations of axially symmetrical arrangement was presented in "Researches of model plasma reactor for purify Diesel exhaust gas of particulates" published in Journal of KONES 2006. In the publication the attention was drawn to the fundamental problems requiring the solution, and namely: - The quick coating of electrodes insulators with soot, which took effect of leakance of corona discharge current and fading away of discharge, - Somewhat low, over a dozen-percentage effectiveness of cleaning process in comparison with previously studied flat arrangement, which effectiveness came up to 40 %. Subsequent investigations were concentrated on capturing of above-mentioned difficulties. Some modified variants of device were prepared. The number of electrodes was limited from three to only one, which was enclosed with insulator serving as the cardinal bracket of blades assembly generating corona discharge and the deflecting electrode. This new arrangement permitted examination of several variants of device described in present publication, which in consequence constrained searching of methods of soot settlement limitation to two final solutions: blowing-in of air stream in place of soot settlement (described in present publication) as well as burning the soot sediment on artificially warmed surface of insulator (in preparation). In order to improve the cleaning effectiveness of the system, the empirical tests of different variants of discharge area formation are carrying out with simultaneously measurement of discharge current, being the measure of its intensity. The subjects of comparison were among other things the mesh of thin wires and the aggregate of linear blades. Applying of filter modules in form of concentric meshes of different diameter of net mesh caused the improvement of cleaning effectiveness to over 40 %.
W badaniach skoncentrowano się na układach osiowo-symetrycznych, które pozwalają na dogodniejsze kształtowanie pola elektrostatycznego i stwarzają lepsze możliwości wykonawcze. Opis konstrukcji i wyniki wstępnych badań układu osiowo-symetrycznego opisano w publikacji zamieszczonej w "Journal of KONES 2006"[1]. W publikacji tej zwrócono uwagę na zasadnicze problemy wymagające rozwiązania, a mianowicie: - szybkie pokrywanie się izolatorów elektrod sadzą, co skutkowało upływnością prądu wyładowań koronowych i zanikiem tych wyładowań, - niską kilkunasto-procentową skuteczność oczyszczania urządzenia w porównaniu z uprzednio badanym układem płaskim, którym skuteczność ta wynosiła ok. 40 %. W dalszych badaniach skoncentrowano się na opanowaniu powyższych trudności. Wykonano zmodyfikowane warianty urządzenia, w którym ograniczono liczbę elektrod z trzech do jednej, otoczonej izolatorem, wykonanym jako główny wspornik zespołu ostrzy generujących wyładowania koronowe i elektrody odchylającej. Pozwoliło to na przebadanie kilku wariantów urządzenia opisanych w niniejszej publikacji, co w konsekwencji sprowadziło poszukiwania metod ograniczenia osadzania się sadzy do dwóch rozwiązań - z nadmuchem strumienia powietrza w miejsca osadzania się sadzy (opisanym w niniejszej publikacji) oraz z wypalaniem sadzy na sztucznie grzanej powierzchni izolatora (w przygotowaniu). W celu poprawy skuteczności oczyszczania, empirycznym badaniom poddawane są różne warianty kształtowania pola wyładowań koronowych, z pomiarem prądu tych wyładowań jako miary ich intensywności. Badaniom poddano m.in. warianty z siatką cienkich drutów w porównaniu z zespołem ostrzy liniowych. Po zastosowaniu modułu filtrów w postaci koncentrycznych siatek o różnej średnicy oczek uzyskano poprawę skuteczności oczyszczania do ponad 40 %.
Źródło:
Journal of KONES; 2007, 14, 4; 563-569
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The use of expert system for marine diesel engine diagnosis
Zastosowanie systemu eksperckiego do diagnozy wysokoprężnych silników okrętowych
Autorzy:
Charchalis, A.
Pawletko, R.
Powiązania:
https://bibliotekanauki.pl/articles/222054.pdf
Data publikacji:
2012
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
diagnostyka techniczna
system ekspercki
wysokoprężne silniki okrętowe
technical diagnostic
expert system
marine diesel engines
Opis:
The paper presents a diagnostic system for marine diesel engine based on an expert system model. The research relevant to knowledge acquisition for this system was done, knowledge data set was built and general structures of the expert system was proposed. Basic sources of knowledge which can be used for construction of knowledge data set are also identified. The basic knowledge related to the diesel diagnostic was undertaken from experts and diagnostic data base. The paper questionnaire was used to the knowledge acquisition from experts. The basic knowledge related to the marine diesel exploitation was undertaken. The rule induction algorithms was used to knowledge acquisition from data base. During the experiment efficiency of LEM induction algorithms was compared to new MODLEM and EXPLORE algorithms. Training and test data were acquired from experiment on marine engine Sulzer 3AL 25/30.
Artykuł przedstawia system diagnostyczny okrętowego silnika wysokoprężnego oparty na modelu systemu eksperckiego. Przeprowadzono badania odpowiednia dla pozyskania informacji o tym systemie, stworzono zestaw danych oraz zaproponowano struktury ogólne systemu eksperckiego. Zidentyfikowano również podstawowe źródła informacji, które mogą być wykorzystane do budowy zestawu danych wiedzy. Podstawowa wiedza odnosząca się do diagnostyki silników wysokoprężnych została wzięta z eksperckich i diagnostycznych baz danych. Wykorzystano kwestionariusz papierowy w celu uzyskania wiedzy od ekspertów. Uzyskano podstawowe informacje odnoszącą się do eksploatacji silników okrętowych. Zastosowano algorytmy rule induction do uzyskania informacji z bazy danych. Podczas eksperymentu sprawność algorytmów induction LEM została porównana z nowymi algorytmami MODLEM i EXPLORE. Dane szkoleniowe i testowe zostały uzyskane z eksperymentu na silniku okrętowym Sulzer 3AL 25/30.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2012, R. 53 nr 1 (188), 1 (188); 49-56
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Durability and wear of engine parts – new methods of testing of alloys and composites
Autorzy:
Ranachowski, Z.
Pawełek, A.
Jasieński, Z.
Piątkowski, A.
Kudela Jr., S.
Lewandowski, M.
Mazuruk, P.
Powiązania:
https://bibliotekanauki.pl/articles/360606.pdf
Data publikacji:
2013
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
Diesel engines diagnostics
light alloys and composites
Common Rail fuel system
Acoustic Emission method
Opis:
The paper deals with the problems related to the diagnostics of selected parts of modern Diesel engines. The evolution of mechanical properties of four alloys of Mg-Li-Al system and four composites made on the base of the alloys mentioned above, caused by variation of its composition was presented. The Acoustic Emission (AE) method applied to monitoring of degradation of mechanical properties of the alloys and composites was described. Moreover, the results of the investigation of failures occurring in the injectors of Common Rail Diesel engines performed with the application of AE method were also reported.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2013, 35 (107); 125-131
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problemy eksploatacji wtryskiwaczy silników Sulzer 6AL20/24D
Operating Problems of Marine Diesel Injectors Sulzer 6AL20/24D
Autorzy:
Monieta, J.
Powiązania:
https://bibliotekanauki.pl/articles/359728.pdf
Data publikacji:
2004
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
silniki okrętowe
wtryskiwacze
problemy eksploatacji
EXPLO-SHIP 2004
marine diesel engines
injectors
operating problems
Opis:
Podano wyniki badań eksploatacyjnych podzespołów okrętowych silników typu 6AL20/24 produkowanych na licencji szwajcarskiej firmy Sulzer. Przedstawiono podstawowe rodzaje uszkodzeń i zużycia wtryskiwaczy oraz podano przykładowe ich skutki dla stanu technicznego silnika.
The paper the contains results of operational investigations of marine diesel engine sub-assemblies (engine type 6AL20/24), manufactured under Sulzer licence. Presented are fundamental kinds of failures and wear of injectors as well as examples of their effects for the technical state of engines.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2004, 1 (73); 423-432
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Residual fuel atomization process simulation
Autorzy:
Klyus, O.
Zamiatina, N.
Powiązania:
https://bibliotekanauki.pl/articles/134168.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diesel engines
residual fuel
mean diameter of Sauter
silnik spalinowy
paliwo pozostałościowe
średnica Sautera
Opis:
The process of atomization of fuel in engines with compression ignition is determining in organization of the combustion process, the result of which are the economic and environmental performance of the engine. One of the main parameters of the spray jet fuel is the mean droplet diameter. The article presents the results of analytical and experimental studies by the definition of mean diameter of Sauter roplet of atomized residual fuel IFO380.
Źródło:
Combustion Engines; 2017, 56, 2; 108-112
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of diesel engines thermal condition on fuel consumption and smoke of exhaust gases
Autorzy:
Pukalskas, S.
Pikunas, A.
Bureika, G.
Powiązania:
https://bibliotekanauki.pl/articles/245614.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engines fuel consumption
engine's thermal condition
temperature of engine's cooling liquid
smoke in exhaust
Opis:
The number of vehicles in the world is growing rapidly. Therefore, the global consumption of crude oil is increasing and its natural resources are being depleted. It causes the rise of oil fuel cost. Constantly rising energy prices and emironmental concerns have made energy saving the highest priority for transportation operators. The main goal of vehicles' operation is economy. The fuel consumption of the most popular internal combustion engines depends on various factors, and one of the most important of them is thermal condition. Energy or fuel saving is the main way to reduce operational expenses of vehicles. This paper aims to investigate fuel consumption of 1.9 liter volume direct injection diesel engine and to construct a diagram of the dependence of the amount of smoke in exhaust on the temperature of engine's operation. The temperature was fixed in the engine's crankcase, while the temperature of cooling liquid was measured at four points as well as during the engine's bench testing. Unexpected test results are obtained: when the temperature of exhaust gases rises above 70-75 °C, the amount of smoke increases by a few times. Finally, basic conclusions and recommendations are given.
Źródło:
Journal of KONES; 2009, 16, 3; 319-324
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preliminary biofuel treatment in injector bodies of diesel engines
Wstępna obróbka paliw pochodzenia roślinnego we wtryskiwaczach silnika z zapłonem samoczynnym
Autorzy:
Klyus, O.
Powiązania:
https://bibliotekanauki.pl/articles/224261.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
paliwo pochodzenia roślinnego
gazy wylotowe
emisja związków toksycznych
silnik o zapłonie samoczynnym
biofuel
diesel engines
Opis:
The paper discusses possibilities of increasing the performance parameters of a diesel engine and decreasing the emission of toxic compounds contained in exhaust gases by using preliminary catalytic treatment of biofuel, executed directly in the injector body. In order to enhance the impact of the catalyst on the flowing fuel the author proposes to utilize the phenomenon of turbulization in injector passages. The results of tests on a 359 type engine have shown an improvement of operational parameters and a decrease of toxic emission in exhaust gases.
W artykule przedstawiono możliwości zwiększenia efektywnych parametrów pracy silnika z zapłonem samoczynnym przy jednoczesnym zmniejszeniu poziomu emisji związków toksycznych w gazach wylotowych przy zastosowaniu wstępnej obróbki paliw pochodzenia roślinnego. W tym celu proponuje się zastosowanie wstępnej obróbki - termicznej, katalitycznej i turbulizacyjnej, która odbywa się bezpośrednio w korpusie rozpylaczy paliwowych. Wyniki badań uzyskanych na silniku typu 359 wskazująna poprawę ekonomicznych i ekologicznych parametrów pracy przy zastosowaniu wstępnej obróbki paliwa.
Źródło:
Archives of Transport; 2012, 24, 1; 17-25
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Functional model of injector of medium-speed marine diesel engine
Model funkcjonalny wtryskiwacza średnio-obrotowego silnika okrętowego
Autorzy:
Monieta, J.
Powiązania:
https://bibliotekanauki.pl/articles/246472.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
statki morskie
silniki okrętowe
wtryskiwacze
funkcjonowanie
modelowanie
seagoing vessels
marine diesel engines
injectors
performance
modelling
Opis:
The paper presents elaborated model of marine diesel engine injector as series of functional blocks notation by means rectangles. The each block is contains determinate number of entrances and exits. The some exits values of one block are entrances values of other blocks. The elaborated model takes qualification of changeable values of pressures in working chamber of cylinder and course variation of pressure in closed space of injection pump and injector. It takes an aspect of course of pressure values as working parameter at exit. There have been simulated for different load of engine on pressure course in each space of injection apparatus and in cylinder during working cycle on subordination crank angle. In article have been formulate of mathematical dependence and utilization of experimental dates, with enabled calculation of interest parameters and for indexes for simulated process. The model takes into consideration the properties of the fuel injected, construction parameters of the injection systems and temperature and temperature course of the working medium.
W artykule przedstawiono opracowany model wtryskiwacza okrętowego silnika spalinowego, jako zbioru bloków funkcjonalnych oznaczonych za pomocą prostokątów, z których każdy zawiera określoną liczbę wejść i wyjść. Określone wielkości wyjściowe jednego bloku są wielkościami wejściowymi innego bloku. Opracowany model obejmuje określenie wartości ciśnień zmieniających się w komorze roboczej cylindra i przebiegu zmian ciśnienia w przestrzeniach zamkniętych pompy wtryskowe i wtryskiwacza. Podejmuje on aspekt przebiegu wartości ciśnienia, jako roboczego parametru wyjściowego. Zasymulowano dla różnych wartości obciążenia silnika na przebieg ciśnienia w poszczególnych przestrzeniach aparatury wtryskowej i w cylindrze w czasie cyklu roboczego w zależności od kąta obrotu wału korbowego silnika. W artykule sformułowano zależności matematyczne i wykorzystano dane eksperymentalne, umożliwiające obliczenie interesujących parametrów i wskaźników charakterystycznych dla symulowanego procesu. Model uwzględnia właściwości wtryskiwanego paliwa, parametry konstrukcyjne sytemu wtryskowego oraz ciśnienie i temperaturę czynnika roboczego
Źródło:
Journal of KONES; 2007, 14, 3; 423-428
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development trends in contemporary container vessels designs
Tendencje rozwojowe w projektach współczesnych statków - kontenerowców
Autorzy:
Charchalis, A.
Krefft, J.
Powiązania:
https://bibliotekanauki.pl/articles/241687.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
okrętownictwo
kontenerowce
TEU
morskie siłownie
silniki wysokoprężne
shipbuilding
container vessels
marine power plants
diesel engines
Opis:
Stały wzrost zapotrzebowania na handel morski spowodował silny rozwój floty kontenerowców. Wielkość światowej floty kontenerowców wynosiła 3400jednostek w marcu 2005 a zaledwie rok później osiągnęła ona wartość około 3800 jednostek. Co więcej, światowa lista zamówień na kontenerowce zawiera ponad 1000 jednostek. Liczba największych kontenerowców rośnie zgodnie z liczbą pływających po morzu kontenerowców. Przewidywalny jest wzrost zapotrzebowania na małe statki dostawcze i statki dostawcze z większą pojemnością handlową, oznaczającą większą liczbę TEU na pokładzie i większą prędkością rejsową, wzrost wynikający z większej liczby kontenerowców o dużych pojemnościach zawijających do kilku głównych portów morskich. Te małe statki dostawcze i statki dostawcze zapewnią handel pomiędzy dużymi terminalami kontenerowymi i małymi portami spełniając funkcje zaopatrzeniowe. Współczesne statki kontenerowe mają pojemność ładunku dochodzącą do 14 000 TEU i przewiduje się, że pojemność ta osiągnie wartość 18 000 TEU z prędkością podróżną wynoszącą 28 węzłów. Powoduje to konieczność wykorzystania jako głównych silników statków silników Diesla o mocach wyjściowych dochodzących do 100 000 kW ze sprawnością około 50%. Artykuł zawiera klasyfikację floty kontenerowców opartą na liczbie TEU i obszarze żeglugowym, jak również zawiera opisy konfiguracji morskich siłowni dla współczesnych kontenerowców, z uwzględnieniem napędu głównego, siłowni elektrycznych i parowych. Ponadto, omówione zostały współczesne trendy w budowie kadłubów okrętowych i morskich siłowni.
Permanent growth of sea trade demand has contributed to strong expansion of container carriers. The capacity of the worlds container fleet was about 3400 vessels in March 2005 and only one year later it reached the number of about 3800 ships. What is more, there are over 1000 container carriers in the world's order book. The number of the biggest capacity container carriers is growing along with the number of container vessels at sea. The increasing demand for small feeders and feeders with higher trade capacity, meaning more TEU on board and higher en route speed resulting from higher number of large capacity container carriers that will call at a few main seaports, is predictable. These small feeders and feeders will trade between big container terminals and smaller ports as suppliers. Contemporary container vessels have a load carrying capacity of up to 14 000 TEU and it is foreseen that the capacity will reach 18 000 TEU with voyage speed amounting to 28 knots. It causes the necessity of using diesel engines whose output power is even 100000 kW with an efficiency of about 50% as the main ship propulsion. The container vessel fleet classification based on TEU number and trading area as well as configurations of marine power plants for the contemporary container vessels regarding main propulsion, electric power and boiler plants have been shown in the article. Moreover, the trends of ship hulls and marine power plants are discussed.
Źródło:
Journal of KONES; 2008, 15, 4; 99-107
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Perspectives of applying of water-coal emulsion in heavy duty stationary diesel engines
Perspektywy zastosowania emulsji węglowo-wodnej w wyskoobciążonych stacjonarnych silnikach o zapłonie samoczynnym
Autorzy:
Mitianiec, W.
Powiązania:
https://bibliotekanauki.pl/articles/133268.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
transport
diesel engines
fuelling
water-coal emulsion
combustion
silnik Diesla
zasilanie
emulsja węglowo-wodna
spalanie
Opis:
Large deposits of coal and lignite in the world enable to utilize as fuel in different thermal machines, especially in internal combustion engines. A carbon powder containing small molecules about 5–10 micrometers dissolved in water is good fuel for applying in large capacity engines in electrical plants. Aqueous emulsion of coal has possibility of good cooling of injectors cooling and has also good lubricity. The paper gives necessary information about obtaining of water-coal emulsion, its physical properties and technical realization of fuelling system. Initial experimental tests indicate a higher thermal efficiency of engine fuelled by water coal emulsion than engine fuelled by diesel oil and also gas turbine driven by gas from coal gasification technology. The in-creased emission of CO2 can be reduced in the plants simply by chemical reduction. The paper explains thermo-chemical processes taking place in the engines during combustion process. The work parameters results obtained from calculations were compared with those obtained from CI engine fuelled by diesel oil. The paper is a certain challenge for finding a new fuel sources as a competition for crude oil and allows to get acquainted with new engine fuelling technology.
Duże pokłady węgla kamiennego i brunatnego na świecie umożliwiają wykorzystanie jako paliwa w rozlicznych maszynach cieplnych, szczególnie w tłokowych silnikach spalinowych. Sproszkowany węgiel zawierający małe drobiny około 5–10 mikrometrów rozpuszczony w wodzie jest dobrym paliwem do zastosowania w silnikach Diesla o dużej pojemności w elektrowniach. Wodny roztwór węgla umożliwia dobre chłodzenie wtryskiwacza oraz wykazuje również dobrą smarność. Artykuł podaje niezbędne informacje o otrzymywaniu emulsji węglowo-wodnej, podaje jej właściwości fizyczne oraz techniczną realizację takiego systemu zasilania. Wstępne badania doświadczalne wykazały większą sprawność cieplną silników zasilanych taką emulsją niż silniki zasilane olejem napędowym oraz turbin gazowych zasilanych produktami zgazowywania węgla. Większa emisja CO2 może być zredukowana w elektrowniach przez chemiczną redukcję albo sekwestrację. Artykuł wyjaśnia procesy termochemiczne występujące w procesie spalania takich silników. Parametry robocze silnika zasilanego emulsją węglowo-wodną otrzymane z symulacji zostały porównane z parametrami silnika zasilanego olejem napędowym. Artykuł jest próbą znalezienia nowego źródła paliwa jako konkurenta w stosunku do ropy naftowej i pozwala zaznajomić się nową techniką zasilania silnika spalinowego.
Źródło:
Combustion Engines; 2015, 54, 3; 744-751
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the suitability of synthetic polymer fuels in self-ignition engines
Autorzy:
Klyus, Oleh
Krause, Paweł
Markov, Vladimir A.
Skarbek-Żabkin, Anna
Sa, Bowen
Powiązania:
https://bibliotekanauki.pl/articles/133585.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
synthetic polymer fuels
Sauter mean diameter
diesel engines
paliwa polimerowe
średnia średnica Sautera
silniki wysokoprężne
Opis:
The article presents a method for determining the quality of spraying a mixture of oil and synthetic fuels obtained from the processing of polymer materials. Laboratory tests of physical parameters of such a mixture were carried out, which made it possible to determine the limit values for the volume fraction of synthetic fuels. The method of determining the suitability of this type of fuel takes into account the criterion numbers Re and Oh, which include physical parameters such as viscosity, density, and surface tension. The experimental part concerning the distribution of droplets of injected fuel and determination of Sauter Mean Diameter using laser diffraction confirmed the usefulness of the developed method for the assessment of the possibility of using a mixture of petroleum-based and synthetic fuels in self-ignition engines.
Źródło:
Combustion Engines; 2019, 58, 3; 129-134
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combustion process of direct injected water-coal mixture in diesel engine
Autorzy:
Mitianiec, W.
Powiązania:
https://bibliotekanauki.pl/articles/134144.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
transport
diesel engines
fuelling
water-coal emulsion
combustion
silnik spalinowy
tankowanie
emulsja wodno-węglowa
spalania
Opis:
The paper describes the problem of coal-water mixture combustion process in heavy duty diesel engines in the energetic sector application. In the future due to depletion of crude oil resources we have to foreseen another fuel for application in power plants. Large deposits of coal and lignite in the world enable to utilize these fuels in different thermal machines, especially in internal combustion engines. A carbon powder containing small molecules about 10–20 micrometers dissolved in water is good fuel for applying in large capacity engines in electrical plants. Aqueous emulsion of coal has possibility of good cooling of injectors cooling and has also good lubricity. Initial experimental tests done in the world indicate a higher thermal efficiency of engine fuelled by water coal emulsion than engine fuelled by diesel oil and also gas turbine driven by gas from coal gasification technology. The increased emission of CO2 can be reduced in the plants simply by chemical reduction. The paper explains thermochemical processes taking place in the engines during combustion process. The work parameters results obtained from calculations were compared with those obtained from CI engine fuelled by diesel oil. The paper is a certain challenge for finding a new fuel sources as a competition for crude oil and allows to get acquainted with new engine fuelling technology.
Źródło:
Combustion Engines; 2016, 55, 1; 37-43
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of the combustion chamber strength of aluminum pistons in diesel engines using the DuralBowl technology
Autorzy:
Żurawski, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/24202436.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diesel engines
DuralBowl
piston
combustion chamber
chamber melting
silnik Diesla
tłok
komora spalania
topnienie komory
Opis:
The article focuses on the problem of loading the combustion chamber of diesel engine pistons together with the method of its optimization using the DuralBowl technology. Along with the growing requirements of exhaust emission standards, the increasing competition in the efficiency of internal combustion engines, the load on the combustion pistons increases due to the increase in pressure and temperature of fuel combustion and the tendency to slim the structure. Numerical analyzes and analyzes of damaged pistons in diesel engines have shown that one of the places most exposed to piston damage are the combustion chambers. There is a concentration of thermomechanical stress at the edge of the combustion chamber, which may lead to the destruction of the piston and the necessity to carry out overhaul of the drive unit. One of the technologies that optimizes the strength of this zone is the DuralBowl local remelting process. This process allows for several timesimprovement in the fatigue strength of pistons in internal combustion engines. The article analyzes the thermomechanical load on the combustion chamber along with the impact of this load on the durability of pistons in diesel engines. An analysis of the DuralBowl process was also performed, aimed at eliminating the negative effects of loading the combustion chamber, extending the piston life. The analysis focused on the microstructure of the material before and after the DuralBowl process.
Źródło:
Combustion Engines; 2023, 62, 1; 91--96
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The development of long-range heat transfer surfaces for marine diesel engine charge air coolers
Autorzy:
Kuznetsov, Valerii
Gogorenko, Oleksiy
Kuznetsova, Svetlana
Powiązania:
https://bibliotekanauki.pl/articles/1818882.pdf
Data publikacji:
2021
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
marine diesel engines
charge air cooler
heat transfer surface
efficiency
finns
dimples
nonround cross section tube
Opis:
Charge air cooling is essential for the efficient operation of marine diesel engines. This work presents the results of research on the characteristics of long-range heat transfer surfaces for marine diesel engines. Elliptical and flat-oval tubes were considered. This study was carried out using mathematical models that consisted of the equations for energy conservation, motion, continuity, and state. The RSM turbulence model was used to close the system of equations. To solve the resulting system of equations, the RANS approach was used, which was implemented in the software package Code Saturne with a free license and the SimScale cloud service. The mathematical model was verified by comparing the model results with the experimental results obtained using a prototype heat-exchange surface of a charge air cooler at a test bench. The discrepancy between the theoretical and experimental heat transfer coefficient α was ≤ 8.3%. An estimate of the compactness of smooth elliptical and flat-oval tube banks compared with round ones was carried out. A 19.6% increase in compactness was obtained for elliptical tubes and 17.5% for flat-oval tubes. Based on the profiled finning surfaces, it is possible to improve their thermohydraulic characteristics by up to 40% when using them together with elliptical tubes compared with round ones and up to 26% when using them with flat-oval tubes.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2021, 65 (137); 51-57
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of the addition of synthetic fuel on the selected physico-chemical properties of the fuel for the diesel engines
Autorzy:
Skarbek-Żabkin, A.
Powiązania:
https://bibliotekanauki.pl/articles/134248.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
alternative fuels
polymer materials
synthetic fuel
diesel engines
paliwa alternatywne
materiały polimerowe
paliwo syntetyczne
silniki spalinowe
Opis:
Plastics present a major threat to today's society and environment. Though mankind has awoken to this threat and responded with developments in creating degradable bio plastics, there is still no conclusive effort done to repair the damage already caused. In this regard, the catalytic depolymerization studied here presents an efficient, clean and very effective means of removing the debris that we have left behind over the last several decades. By converting plastics to fuel, we solve two issues, one of the large plastic seas, and the other of the fuel shortage. This dual benefit, though will exist only as long as the waste plastics last, but will surely provide a strong platform for us to build on a sustainable, clean and green future. The paper presents results of density, viscosity, cetane number, ignition temperature of 100% synthetic fuel and this fuel’s mixture with the diesel oil. The quality of the fuel-air mixture formation is best characterized by the SMD parameter – Sauter's average diameter of spray drops, and its value in analytical studies depends on the physical parameters of the fuel (density, viscosity, surface tension). The results of laboratory tests will be developed in terms of the use of the measured parameters of a synthetic fuel mixture to calculate SMD values and to correct analytical equations taking into account the actual SMD values measured by laser diffraction laboratory tests.
Źródło:
Combustion Engines; 2017, 56, 4; 193-195
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Changes in marine diesel engines operating strategy
Autorzy:
Lus, T.
Powiązania:
https://bibliotekanauki.pl/articles/27315859.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
marine diesel engines
planned maintenance
condition based maintenance
vibration analysis
Morskie silniki wysokoprężne
konserwacja planowa
wibracje
Opis:
Constant changes in the operating strategy of marine diesel engines are observed. They refer to whole engine and different functional systems of the engine in different range. The paper presents changes in marine diesel engines operating strategy. Gradual transition from simple failure response operating strategy - Corrective Maintenance (CM) to a reliability-oriented strategy - Reliability Centered Maintenance (RCM) has been described together with some remarks about Planed Maintenance (PM) systems and Condition Based Maintenance (CBM) systems with their latest form called CBM+. Some information about changes in diesel engines operating strategy in the Polish Navy (PN) at the turn of the last 35 years is also presented. An attempt to build engine analyzer for high-speed diesel engines at the Polish Naval Academy (PNA) in order to improve submarine diesel engines operating strategy is also described in the paper.
Źródło:
New Trends in Production Engineering; 2018, 1, 1; 739-746
2545-2843
Pojawia się w:
New Trends in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preduprezdenie otkazov sistem vozduhosnabzenia sudovyh dizelej
Prevention of Ship Diesel-Air-Supply Systems Failures
Autorzy:
Kantalinskij, V.
Powiązania:
https://bibliotekanauki.pl/articles/358984.pdf
Data publikacji:
2005
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
systems of air supply
gas-turbo-superchargers
surging
causes of failures
prevention of auxiliary diesel engines failures
Opis:
The development of the systems of air-supply and gas-turbo-superchargers is shown through an analysis done in field operation and failures caused by the gas-turbo-superchargers and supercharging systems. An analysis has been performed aiming at emergency prevention measures.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2005, 5 (77); 293-301
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Concept and models for evaluation of black and white smoke components in diesel engine exhaust
Autorzy:
Blayankinshtein, I.
Askhabov, A.
Voevodin, E.
Kashura, A.
Malchikov, S.
Powiązania:
https://bibliotekanauki.pl/articles/374154.pdf
Data publikacji:
2017
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
test of diesel
opacity estimates
toxicity of the exhaust gases diesel engines
test oleju napędowego
ocena nieprzezroczystości
toksyczność spalinowych silników wysokoprężnych
Opis:
A method for measuring exhaust smoke opacity has been developed, which allows estimating the differentiated components forming black exhaust and those forming white smoke. The method is based on video recording and special software for processing the video recording data. The flow of the diesel exhaust gas is visualised using the digital camera, against the background of the screen, on a cut of an exhaust pipe, and with sufficient illumination of the area. The screen represents standards of whiteness and blackness. The content of the black components (soot) is determined by the degree of blackening of the white standard in the frames of the video, and the content of whitish components (unburned fuel and oil, etc.) is determined by the degree of whitening of black standard on the frames of the video. The paper describes the principle and the results of testing the proposed method of measuring exhaust smoke opacity. We present an algorithm for the frame-by-frame analysis of the video sequence, and static and dynamic mathematical models of exhaust opacity, measured under free-acceleration of a diesel engine.
Źródło:
Transport Problems; 2017, 12, 3; 83-91
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rassirenie energeticeskoj bazy topliv rastitelnogo proishozdenia dla ispolzovania v dvigatelah vnutrennogo sgorania
Expansion of Vegetable Fuels Energy Utilization in Engines of Internal Combustion
Autorzy:
Klyus, O.
Vasil'ev, I.
Powiązania:
https://bibliotekanauki.pl/articles/359902.pdf
Data publikacji:
2004
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
EXPLO-SHIP 2004
silniki spalinowe
olej kukurydziany
olej sojowy
paliwa roślinne
diesel engines
fuel injection system
vegetable fuel
Opis:
The Paper considers fuels generated from crops rotation producing oils for application in diesel engines. Experimental data is given on application of various oils mixed with diesel fuel in diesel engines with a swirl chamber.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2004, 1 (73); 333-342
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie wstępnej obróbki paliw pochodzenia roślinnego w silnikach z zapłonem samoczynnym
The using of preliminary biofuel treatment in diesel engines
Autorzy:
Klyus, O.
Powiązania:
https://bibliotekanauki.pl/articles/133280.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
silnik z zapłonem samoczynnym
paliwa pochodzenia roślinnego
wstępna obróbka paliwa
turbulizacja
diesel engines
biofuel
preliminary fuel treatment
turbulized
Opis:
Spełnienie wymagań poziomu emisji związków toksycznych w gazach odlotowych silników z zapłonem samoczynnym możliwe jest przy zastosowaniu wstępnej katalityczno-turbulizacyjnej obróbki paliwa. W artykule przedstawiono wyniki badań silnika z bezpośrednim wtryskiwaniem mieszaniny paliw ropopochodnych i pochodzenia roślinnego dla dwóch wersji układu turbulizacyjnego wtryskiwaczy paliwowych, które wskazują na poprawę parametrów efektywnych (obniżenie jednostkowego zużycia paliwa o 8%) jak i ekologicznych pracy silnika (obniżenie emisji NOx o 15%).
The reduction of unit fuel consumption and exhausts toxic emission in the diesel engines was possible by implementing preliminary catalytic and turbulized fuel treatment that takes place directly in the fuel injector The article presents the results of tests of direct injection diesel engines on diesel fuel and mixtures with biofuel for two versions of turbulized. Preliminary fuel treatment results in the average reduction of unit fuel consumption of those engines by 8%, while toxic emission of nitrogen oxides drops by 15%.
Źródło:
Combustion Engines; 2015, 54, 3; 639-643
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania stanowiskowe instalacji HHO w układzie z silnikiem spalinowym Volvo Penta D5A T
Stand tests of HHO installation in the system with Volvo Penta D5A T diesel engine
Autorzy:
Dobrzaniecki, P.
Kaczmarczyk, K.
Powiązania:
https://bibliotekanauki.pl/articles/198973.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniki Górniczej KOMAG
Tematy:
silniki spalinowe
generator HHO
skład chemiczny spalin
badania
diesel engines
HHO generator
chemical composition of exhaust gases
tests
Opis:
W artykule przedstawiono wyniki badań układu, składającego się z generatora HHO współpracującego z silnikiem spalinowym, wyposażonym w górniczy układ dolotowo-wylotowy. Celem badań była identyfikacja parametrów użytkowych silnika, takich jak moc i moment obrotowy oraz określenie zawartości substancji szkodliwych w spalinach. Na podstawie wyników badań dokonano analizy wpływu generatora na pracę silnika spalinowego.
Results of tests of the system consisting of HHO generator cooperating with diesel engine, equipped with special inlet-outlet system, are presented. Identification of engine operational parameters, such as power and torque, as well as determination of concentration of hazardous substances in exhaust gases were the tests objectives. Impact of generator on operation of diesel engine was analyzed on the basis of test results.
Źródło:
Maszyny Górnicze; 2016, 34, 1; 11-21
0209-3693
2450-9442
Pojawia się w:
Maszyny Górnicze
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
O tehnologiceskih metodah povysenia nadeznosti raspylitelej cudovyh dizelej
Technological Methods of Increasing the Reliability of Ships Diesel Engine Atomizers
Autorzy:
Puhov, V.
Powiązania:
https://bibliotekanauki.pl/articles/359351.pdf
Data publikacji:
2006
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
EXPLO-SHIP 2006
diesel engines atomizers
reliability
section gage log
out-of-roundness profiles
conical gland
production technology
Opis:
This paper, based on analysis of section gage logs and out-of-roundness profiles of cylindric precise surfaces and conical glands of domestic and abroad manufactured atomizers, shows the influence of production technology quality on atomizers' reliability. Besides, some methods of increasing the reliability are offered.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2006, 10 (82); 339-344
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efficiency of raw material selection for the second generation BIOXDIESEL biofuel for diesel engines
Efektywność doboru surowcowego biopaliw II generacji BIOXDIESEL do silników o ZS
Autorzy:
Struś, M.
Poprawski, W.
Rewolte, M.
Powiązania:
https://bibliotekanauki.pl/articles/133244.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
biofuels
Fatty Acid Ethyl Esters
FAEE
Bioxdiesel
Diesel engines
biopaliwa
estry etylowe kwasów tłuszczowych
silniki spalinowe o ZS
Opis:
Paper presents schematic description of research covering raw material selection and production of Fatty Acid Ethyl Esters from waste vegetable and animal fats, which are creating a base for three-component fuel BIOXDIESEL as well as results physical, chemical analysis and results of engine tests. Mixtures of the BIOXDIESEL fuel with various composition have been testing to obtain physical-chemical properties and engine tests on the engine test bed, vehicle test bed and drive tests. Obtained so far and described in this paper results indicate full feedstock interchangeability of waste vegetable and animal fats with hydrocarbons with petrol origins as well as engine work efficiency.
W opracowaniu przedstawiono schemat prac badawczych obejmujących dobór surowców i wytwarzanie estrów etylowych z odpadowych tłuszczów roślinnych i zwierzęcych, stanowiących podstawę trójkomponentowego paliwa BIOXDIESEL i wyniki badań fizykochemicznych oraz silnikowych. Mieszaniny paliwa BIOXDIESEL o zróżnicowanym składzie komponentowym poddano badaniom fizykochemicznym a także silnikowym na hamownianym stanowisku pomiarowym, hamowni podwoziowej oraz badaniom trakcyjnym. Uzyskane dotychczas i opisane w opracowaniu rezultaty wskazują na pełną zamienność surowcową odpadowych tłuszczów roślinnych i zwierzęcych z ropopochodnymi węglowodorami w aspekcie właściwości paliw a także efektywności pracy silników.
Źródło:
Combustion Engines; 2015, 54, 3; 1053-1059
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Filtracja magnetyczna wody chłodzącej zapobiegająca tworzeniu się osadów w układach chłodzenia silników spalinowych lokomotyw
Magnetic filtration of cooling water that prevents scale formation in the cooling systems of locomotive diesel engines
Autorzy:
Laptev, Vladimir
Babel, Marek
Powiązania:
https://bibliotekanauki.pl/articles/34572969.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Poznański Instytut Technologiczny
Tematy:
filtracja magnetyczna
woda chłodząca
osad
układ chłodzenia
lokomotywa
silnik spalinowy
magnetic filtration
cooling water
sediment
locomotive
diesel engines
Opis:
W artykule zaprezentowano metodę filtracji wody w układzie chłodzenia silników lokomotyw spalinowych poprzez zastosowanie aparatu magnetycznego, hydrocyklonu i zaworu regulacyjnego. Zastosowana metoda zapobiega powstawaniu osadów (kamienia kotłowego) i korozji na powierzchniach płaszczy wodnych tulei cylindrowych, przewodów wodnych i sekcji chłodzących. Opisano procesy chemiczne i fizyczne zachodzące w trakcie ciągłej filtracji wody chłodzącej. Zaprezentowano sposoby zabudowy zestawów filtrujących w różnych układach chłodzenia silników lokomotyw spalinowych. Przedstawiono przykłady zabudowanych elementów układu filtracji na lokomotywach spalinowych wraz z wynikami eksploatacyjnymi efektywności filtracji wody chłodzącej.
The article presents a method of water filtration used in the cooling system of the locomotive’s diesel engine which involves the installation of magnetic apparatus, centrifugal filter and a control valve. This method prevents scale and corrosion formation on the surfaces of cylinder cooling jackets, water pipelines and cooling- system sections. There are chemical and physical processes described that occur during continuous filtration of the cooling water. Furthermore the article presents ways in which filtration units are installed in various cooling systems of diesel locomotive engines. The examples of the installed elements of the filtration system in diesel-engine locomotives together with the operational results regarding the effectiveness of cooling water filtration are also presented.
Źródło:
Rail Vehicles/Pojazdy Szynowe; 2013, 3; 39-42
0138-0370
2719-9630
Pojawia się w:
Rail Vehicles/Pojazdy Szynowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparing of High-Cycle Fatigue Lifetimes in Un-corroded and Corroded Piston Aluminum Alloys in Diesel Engine Applications
Autorzy:
Azadi, M.
Aroo, H.
Parast, M. S. A.
Powiązania:
https://bibliotekanauki.pl/articles/2079778.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bending fatigue
corrosion fatigue
piston aluminum alloys
diesel engines
immersion time
zginanie
zmęczenie korozyjne
tłoki
stopy aluminium
silnik Diesla
Opis:
Diesel engine components in the combustion chamber have been exposed to cyclic loadings under environmental effects, including high temperatures and corrosive fluids. Therefore, knowing the corrosion-fatigue behavior of materials is essential for designer engineers. In this article, pure fatigue and corrosion-fatigue behaviors of the piston aluminum alloy have been experimentally investigated. For such an objective, as-cast and pre-corrosive standard samples were tested by the rotary bending fatigue machine, under 4 stress levels. Some specimens were exposed to the corrosive fluid with 0.00235 % of the sulfuric acid for 100 and 200 hours. The results showed higher weight losses for 200 hours immersion times. As another result, it could be concluded that the lifetime decreased in pre-corrosive samples for both 100 and 200 hours of the immersion time, compared to that of as-cast specimens. However, such a lifetime reduction was more significant for 200 hours of the immersion time, especially within the high-cycle fatigue regime (or lower stress levels). Under high stress levels, both pre-corrosive sample types had almost similar behaviors. The field-emission scanning electron microscopy images of specimen fracture surfaces indicated that the brittle region of the fractured surface was larger for specimens after the 200 hours of corrosion-fatigue testing than the other specimen.
Źródło:
Archives of Foundry Engineering; 2021, 21, 1; 89-94
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of structural and operational parameters of selected Euro 6 engines used in long distance commercial vehicles
Porównanie parametrów konstrukcyjno-eksploatacyjnych wybranych silników Euro 6 stosowanych w ciągnikach siodłowych
Autorzy:
Piernikarski, D.
Powiązania:
https://bibliotekanauki.pl/articles/132975.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
commercial vehicles
trucks
heavy duty diesel engines
Euro 6
engine parameters
pojazdy użytkowe
samochody ciężarowe
silniki ZS
parametry silnika
Opis:
The article presents the most important technical solutions used in heavy duty diesel engines powering commercial vehicles – namely tractors – that meet the requirements of the Euro 6 norm. A comparative analysis of selected structural and operational parameters was also made on the example of engines with typical displacement close to 13 dm³ used in long-distance tractors.
W artykule przedstawiono najważniejsze rozwiązania techniczne stosowane w silnikach wysokoprężnych dużej mocy służących do napędu ciągników siodłowych, spełniających wymagania normy Euro 6. Dokonano również analizy porównawczej wybranych parametrów konstrukcyjno-eksploatacyjnych na przykładzie silników o objętości skokowej 13 dm³ stosowanych w ciągnikach transportu dalekobieżnego.
Źródło:
Combustion Engines; 2015, 54, 4; 3-14
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A comparative study on environmental emissions and performance of a stationary type diesel engine fuelled with biodiesels derived from two different feedstocks
Autorzy:
Sairam, K.
Gopinath, A.
Velraj, R.
Powiązania:
https://bibliotekanauki.pl/articles/207424.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
biodiesel
biopaliwo
silniki wysokoprężne
oleje napędowe
paliwa
tlenki azotu
emisja tlenku węgla
silniki Diesla o wtrysku bezpośrednim
zanieczyszczenie środowiska
emisja tlenków azotu
sprawność cieplna
biodiesel fuel
carbon monoxide
diesel engines
diesel fuels
fuels
nitrogen oxides
carbon monoxide emission
direct injection diesel engines
environmental emissions
nitrogen oxides emission
thermal efficiency
Opis:
The objective of the present study was to experimentally investigate environmental emissions and performance of a stationary type diesel engine fuelled with biodiesels derived from two different feedstocks; one is more unsaturated (rice bran biodiesel) and the other one is more saturated in nature (palm biodiesel) and compare with petrodiesel. Tests were conducted in a single cylinder, air cooled, direct injection diesel engine. From the experimental results, it was found that the nitrogen oxides emissions were higher with biodiesel fuels. The hydrocarbon and carbon monoxide emissions of palm biodiesel were lower than the other test fuels. The smoke emission of rice bran biodiesel was the lowest compared to the rest of the fuels. A considerable reduction in thermal efficiency was found with both the biodiesels when compared to diesel. From the present study, it is concluded that the biodiesels derived from palm and rice bran oils with their different fatty acid composition, show lower exhaust emissions and closer performance characteristics to diesel.
Źródło:
Environment Protection Engineering; 2013, 39, 4; 113-124
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The issue of the atmosphere protection against toxic compounds gas emissions in maritime transport
Autorzy:
Witkowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/242376.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
laboratory tests
supercharging air pressure
exhaust gas content
emission of nitric oxides
vessels propulsions
diesel engines
air humidification
Miller systems
Opis:
The paper discusses influence of the charging air parameters marine diesel engine on the emission toxic compounds in aspect of protecting the atmosphere against pollution from the sea vessels, pointed to the possibility of reducing NOx emissions by changing the parameters of charging air. In this group of activities undertaken to reduce nitric oxides emissions applied inter alia cooling the air and changes in pressure at the beginning of compression stroke. This is discussed in the background of normative acts, in particular the 73/78 MARPOL Convention (International Convention for the Prevention of Pollution from Ships) referring to prevention against marine environment pollution, and later amendments to the Convention with Annex VI (Regulation for the Prevention of Air Pollution from Ships) dealing with reducing the emission of nitric oxides and sulphur oxides into the atmosphere by sea vessels engines.It was also discussed the issue of air humidification as a method to reduce NOx by injecting hot water into a stream of pumped air. This is an overview on the example of two methods proposed for using in marine engines: CASS (Combustion Air Saturation System), HAM (Humid Air Motor system). The results of experimental tests of the influence of charging air pressure on content of exhaust gas, especially content nitric oxides (NOx), of ship diesel engine supplied with marine heavy fuel oil IF40 have been presented in this paper.
Źródło:
Journal of KONES; 2014, 21, 3; 293-300
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Types of internal Diesel injector deposits and counteracting their formation
Przegląd typów osadów wewnętrznych we wtryskiwaczach silników z zapłonem samoczynnym oraz przeciwdziałanie ich powstawaniu
Autorzy:
Stępień, Z.
Powiązania:
https://bibliotekanauki.pl/articles/134007.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
injector internal deposits
diesel engines
fuel injection systems
osady wewnętrzne we wtryskiwaczach paliwa
silniki z zapłonem samoczynnym
układ wtrysku paliwa
Opis:
The paper attempts to distinguish types of IDID (Internal Diesel Injector Deposits) with regard to the mechanism of formation, factors facilitating their formation and the method of identification. Investigations into their formation mechanism have been discussed in the paper. The results of the investigations into the chemical nature and probable source of these deposits have also been discussed. It has been pointed out that modern common rail fuel injection systems might be less tolerant to deposits due to tighter fitting tolerances, lower mass of parts and sophisticated injection strategies. Various approaches to IDID formation counteracting have also been discussed.
W artykule przedstawiono próbę podziału wewnętrznych osadów wtryskiwaczy paliwa na typy, biorąc pod uwagę mechanizmy ich tworzenia, czynniki sprzyjające ich powstawaniu oraz sposoby identyfikacji. Zaprezentowano badania dotyczące mechanizmów tworzenia takich osadów. Opisano także wyniki badań natury chemicznej i prawdopodobnych źródeł powstawania osadów. Zwrócono uwagę, że nowoczesne systemy wtrysku paliwa typu common rail są mniej odporne na oddziaływanie osadów ze względu na mniejsze tolerancje wykonawcze, mniejszą masę elementów roboczych i zaawansowane strategie wtrysku paliwa. Opisano też różne sposoby przeciwdziałania tworzeniu się osadów typu IDID.
Źródło:
Combustion Engines; 2015, 54, 4; 79-91
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fuel recognition in compression ignition engine in the real time
Rozpoznawanie spalanego paliwa w silniku o zapłonie samoczynnym w czasie rzeczywistym
Autorzy:
Kekez, M.
Radziszewski, L.
Powiązania:
https://bibliotekanauki.pl/articles/158513.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
diesel engines
cylinder pressure
type of fuel
artificial intelligence
silniki o zapłonie samoczynnym
ciśnienie w cylindrze
rodzaj paliwa
sztuczna inteligencja
Opis:
Contemporary engines allow controlling the fuel injection process, which should be adjusted to a given fuel. On test bench the engine was fuelled by diesel oil, RME or its blends with diesel oil. In this paper selected artificial intelligence methods are used to build classifiers which recognize type of fuel using cylinder pressure curves recorded and averaged for 20, 30, 40, or 50 consecutive engine working cycles. The accuracy of these methods is compared. There is presented the estimation of the minimum number of consecutive engine cycles during which the pressure curves are recorded, required for recognition of type of fuel by a classifier.
Silniki o zapłonie samoczynnym mogą być zasilane różnymi paliwami. Współczesne silniki pozwalają na sterowanie procesem zasilania, który powinien być przystosowany do danego paliwa. Na stanowisku badawczym, silnik był zasilany olejem napędowym, paliwem RME (estry metylowe kwasów tłuszczowych oleju rzepakowego) oraz mieszankami tych paliw. W artykule zastosowano wybrane metody sztucznej inteligencji w celu zbudowania klasyfikatora, który rozpoznaje typ paliwa na podstawie przebiegów ciśnienia w cylindrze zarejestrowanych i uśrednionych dla 20, 30, 40 oraz 50 kolejnych cykli roboczych silnika. Przedstawiono porównanie dokładności zastosowanych metod (sztuczne sieci neuronowe oraz drzewa decyzyjne CART i CHAID, zaimplementowane w pakiecie Statistica Data Mining, a także drzewo decyzyjne See5). Przedstawiono oszacowanie minimalnej liczby kolejnych cykli pracy silnika, podczas których rejestrowane są przebiegi ciśnienia, niezbędnej do rozpoznania typu paliwa przez klasyfikator. Zaproponowano również implementację klasyfikatora na mikrokontrolerze, pozwalającą na rozpoznawanie typu paliwa w czasie rzeczywistym.
Źródło:
Pomiary Automatyka Kontrola; 2013, R. 59, nr 5, 5; 470-472
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reduction of CO2 emissions from offshore combined cycle diesel engine-steam turbine power plant powered by alternative fuels
Autorzy:
Olszewski, Wojciech
Dzida, Marek
Nguyen, Van Giao
Cao, Dao Nam
Powiązania:
https://bibliotekanauki.pl/articles/34613948.pdf
Data publikacji:
2023
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
ship power plants
alternative marine fuel
greenhouse gases
CO2 emissions
combined power system
diesel engines
steam turbine
gas turbine
Opis:
Diverse forms of environmental pollution arise with the introduction of materials or energy that exert adverse effects on human health, climate patterns, ecosystems, and beyond. Rigorous emission regulations for gases resulting from fuel combustion are being enforced by the European Union and the International Maritime Organization (IMO), directed at maritime sectors to mitigate emissions of SOx, NOx, and CO2. The IMO envisions the realisation of its 2050 targets through a suite of strategies encompassing deliberate reductions in vessel speed, enhanced ship operations, improved propulsion systems, and a transition towards low and zero-emission fuels such as LNG, methanol, hydrogen, and ammonia. While the majority of vessels currently depend on heavy fuel or low-sulphur fuel oil, novel designs integrating alternative fuels are gaining prominence. Technologies like exhaust gas purification systems, LNG, and methanol are being embraced to achieve minimised emissions. This study introduces the concept of a high-power combined ship system, composed of a primary main engine, a diesel engine, and a steam turbine system, harnessing the energy contained within the flue gases of the main combustion engine. Assumptions, constraints for calculations, and a thermodynamic evaluation of the combined cycle are outlined. Additionally, the study scrutinises the utilisation of alternative fuels for ship propulsion and their potential to curtail exhaust emissions, with a specific focus on reducing CO2 output.
Źródło:
Polish Maritime Research; 2023, 3; 71-80
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Eksploatacyjna metoda analizy rozkładu obciążeń użytecznych silników napędu głównego statku
Effective Load Analysis Method of the Ship Main Propulsion Unit
Autorzy:
Borkowski, T.
Kowalak, P.
Kijewska, M.
Powiązania:
https://bibliotekanauki.pl/articles/360565.pdf
Data publikacji:
2005
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
okrętowe wolnoobrotowe silniki wysokoprężne
główne napędy statków
eksploatacja statku
OMiUO 2005
marine slow speed diesel engines
ship propulsion
vessel maintenance
Opis:
Okrętowe wolnoobrotowe silniki wysokoprężne stanowią zdecydowaną większość głównych napędów dla statków handlowych. Instalowane są one w najprostszych układach napędowych, gdzie silnik jest bezpośrednio połączony ze śrubą. Taki układ zapewnia najwyższą sprawność i najniższe z możliwych zużycie paliwa. Warunkiem uzyskania najlepszych rezultatów w tym zakresie jest utrzymywanie w czasie eksploatacji statku określonych zasad eksploatacji głównego napędu statku. W artykule przedstawiono uproszczoną metodę analizy istotnych wskaźników pracy głównego układu napędowego statku. Metoda może być stosowana w eksploatacji silników wyposażonych w standardowe urządzenia pomiarowe.
The marine diesel engine today is the prime mover for ship propulsion. The most typical marine propulsion plant of modern merchant ships is a single, slow-speed turbocharged, two stroke diesel engine, directly coupled to the vessel's single, fixed or controllable pitch propeller. This configuration can provide high power outputs and improved fuel economy. The paper deals with basic ship propulsion factors used for fuel consumption calculations.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2005, 5 (77); 121-130
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of fuel atomization quality in compression ignition engines using acoustic emission signal
Autorzy:
Klyus, Oleh
Rajewski, Przemysław
Lebedevas, Sergeus
Olszowski, Sławomir
Powiązania:
https://bibliotekanauki.pl/articles/2202516.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
Diesel engines
fuel injection
atomization
Sauter mean diameter
acoustic emission
silnik Diesla
wtrysk paliwa
atomizacja
średnia średnica Sautera
emisja akustyczna
Opis:
The analysis of fuel injection processes in diesel engines showed the convergence of physical parameters affecting the mean diameter of the Sauter SMD (selected as a spray quality parameter) of the atomized fuel droplets and the parameters of the acoustic signal emission originating from the spring waves accompanying the atomization process. In experimental studies, the laser diffraction method was used to measure the atomization quality with the Malvern Spraytec device. For the acoustic signal recording and processing there was used the measurement set with a Fujicera 1045S sensor. The correlation between the values of the Sauter diameter and the energy of the acoustic signal has been obtained on the basis of which a method has been developed to assess the quality of fuel atomization in compression ignition engines by measuring the acoustic signal recorded during the fuel injection process.
Źródło:
Combustion Engines; 2022, 61, 4; 83--91
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technical evaluation of marine auxiliary diesel engine on the basis of parameters synchronous generator
Ocena stanu technicznego okrętowego tłokowego silnika spalinowego na podstawie badań parametrów elektrycznych prądnicy okrętowej
Autorzy:
Cwalina, A.
Kniaziewicz, T.
Rudnicki, J.
Zacharewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/132860.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
technical diagnostics
marine diesel engines
working spaces
diagnostic information
diagnostic parameters
diagnostyka techniczna
silnik okrętowy
przestrzenie robocze
informacyjność diagnostyczna
parametr diagnostyczny
Opis:
The article presents a method for evaluating the technical condition of selected structural elements of the reciprocating internal combustion engine driving a synchronous generator. Th results of measurements of the electric generator parameters are the diagnostic information source. On this basis it is possible to determine the instantaneous angular speed marine engine crankshaft which, in turn, is the basis for reasoning about the correctness of the process of fuel combustion in the engine cylinders, and efficiency of the speed controller. By that means one can define the technical condition of the fuel equipment, sealing the piston-rings-cylinder system, and the correctness of the process of the working medium exchange in the engine cylinders.
W artykule przedstawiono metodę oceny stanu technicznego wytypowanych elementów struktury konstrukcyjnej pomocniczego tłokowego silnika spalinowego napędzającego prądnicę synchroniczną. Źródłem informacji diagnostycznej są wyniki pomiarów parametrów elektrycznych prądnicy. Na ich podstawie możliwe jest określenie chwilowych prędkości kątowych wału korbowego silnika okrętowego, co stanowi podstawę do wnioskowania o prawidłowości przebiegu procesu spalania paliwa w cylindrach silnika oraz o oprawności pracy regulatora prędkości obrotowej. Pozwala to na określenie stanu technicznego aparatury paliwowej, szczelności zespołu tłok-pierścienie-cylinder oraz poprawności przebiegu procesu wymiany czynnika roboczego w cylindrach silnika.
Źródło:
Combustion Engines; 2013, 52, 3; 222-225
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie parametrów fizycznych zużytych tłuszczów naturalnych i ich wpływ na parametry pracy silnika ciągnika rolniczego
Study of physical properties of waste natural fats and their impact on tractor engine performance
Autorzy:
Czaczyk, Z.
Czechlowski, M.
Golimowski, W.
Dereń, B.
Powiązania:
https://bibliotekanauki.pl/articles/335984.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
tłuszcze naturalne
olej roślinny
biopaliwa
lepkość
gęstość
silniki wysokoprężne
ciągniki
badania
natural fats
vegetable oils
biofuels
viscosity
density
diesel engines
tractors
experimentation
Opis:
Celem pracy było porównanie właściwości fizycznych odpadowego oleju roślinnego (WCO), zużytej mieszaniny tłuszczów zwierzęcych i roślinnych (WFO), rafinowanego oleju rzepakowego (RO), oraz wpływu ich zastosowania jako paliw na parametry pracy silnika wysokoprężnego. W badaniach punktem odniesienia były parametry osiągane dla oleju napędowego (ON). Badania prowadzono na ciągniku rolniczym ZETOR model 5211 obciążanym poprzez wał odbioru mocy (WOM) za pomocą hamulca silnikowego. Zakres badań obejmował pomiar lepkości dynamicznej i gęstości paliw w funkcji temperatury, momentu obrotowego silnika i ogólnego zużycia paliwa. Określono moc i jednostkowe zużycie paliwa w zakresie obrotowym silnika 1000-2300 obr min-1. Z badań wynika, że parametry paliw pochodzenia roślinnego i zwierzęcego są zbliżone do parametrów ON w temperaturze 65-70°C. Zasilany nimi silnik generuje moc niższą o 2 kW, czemu towarzyszy wzrost jednostkowego zużycia paliwa o 16% w stosunku do wartości uzyskanych dla zasilania olejem napędowym.
The aim of this work was the comparison of physical properties of waste cooking oil (WCO), mix of waste animal and vegetable fats (WFO), pure rapeseed oil (RO) and determine the influence of these materials as a fuel on engine performance. The agriculture tractor ZETOR 5211 connected to engine brake was used in this test. Control test was made on diesel fuel (ON). In first stage of research the dynamic viscosity and density in the range of temperature of materials used to this study was determined. Power and unit fuel consumption in rpm engine between 1000-2300 was determined. Parameters like density and viscosity of materials used to study were similar to diesel fuel in 65-70°C. The engine fueled with WCO and WFO generated power about 2 kW lower than fueled with diesel fuel, furthermore unit fuel consumption increase about 16%.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2012, 57, 2; 47-51
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwości eliminacji zakłóceń przy pomiarach ciśnień w komorze spalania silników okrętowych
Possibilities of Eliminating Inference at Pressure Measurements in Marine Diesel Engine Combustion Chambers
Autorzy:
Borkowski, T.
Kowalak, P.
Powiązania:
https://bibliotekanauki.pl/articles/360569.pdf
Data publikacji:
2005
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
okrętowe silniki z zapłonem samoczynnym
indykowanie
proces spalania
czujniki ciśnienia
zakłócenia
OMiUO 2005
marine diesel engines
firing diagrams
combustion process
pressure transducers
interference
Opis:
Potrzeby wprowadzenia systemów monitoringu procesu spalania, wszystkich układów cylindrowych silników okrętowych przez cały okres eksploatacji stymulują rozwój techniki elektronicznego indykowania. Dane z systemów monitoringu mają służyć zaawansowanej diagnostyce pracy silnika. Złożone przetwarzanie sygnałów pomiarowych wymaga zastosowania precyzyjnych i efektywnych elementów przeciwzakłóceniowych. W artykule przedstawiono aspekty zastosowania filtrów elektronicznych w pomiarze ciśnień w komorze spalania.
In order to improve the reliability of the engine system, a new technology for engine control is needed. One of the methods used to meet this requirement is to develop a convenient and real-time measuring system. The equipment can be used in order to evaluate engine performance. Conventional calculations based on the pressure-volume diagram require a high-speed central processing unit (CPU) and a high accuracy measurement instrument. This paper presents some interference problems with combustion pressure measurement and analysis.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2005, 5 (77); 111-120
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Alternatywna metoda badań układu wtryskowego okrętowego silnika spalinowego
Alternative Research Method for the Marine Engine Injection System
Autorzy:
Bejger, A.
Powiązania:
https://bibliotekanauki.pl/articles/360743.pdf
Data publikacji:
2005
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
emisja akustyczna
układ wtryskowy
okrętowe silniki spalinowe
pompa wtryskowa
wtryskiwacz
OMiUO 2005
acoustic emission
fuel injection system
marine diesel engines
injection pump
injector
Opis:
W artykule zaprezentowano fragment wyników badań ukazujących możliwość wykorzystania emisji akustycznej do diagnozowania układu wtryskowego silnika okrętowego. Za pomocą odpowiedniej obróbki można wyselekcjonować źródła sygnału emisji akustycznej odpowiedzialne za rodzaj występującej w układzie wtryskowym niesprawności.
This paper introduces the partial results of research, showing possibilities of acoustic emission use to the diagnosis of the fuel injection systems of marine diesel engines. By means of a suitable signal process we can get to the source of acoustic emission signals dependent on varying kinds of faults in the injection system.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2005, 5 (77); 47-54
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adjustment of cylinder lubricating oil of marine slow-speed engines
Autorzy:
Van Doan, D.
Murawski, L.
Powiązania:
https://bibliotekanauki.pl/articles/244949.pdf
Data publikacji:
2017
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
cylinder lubricating oil system
slow-speed engine
optimal adjustment
Sulzer diesel engines
układ smarowania cylindrycznego oleju
silnik obrotowy
regulacja optymalna
silnik wysokoprężny Sulzer
Opis:
The article refers to the common task of lubrication system. The fast development of the world's maritime sector, makes competition among countries increasing. Because of the deterioration of the global economy, the shipping companies, ship-owners want to reduce freight rates, to meet safety requirements, as well as improving conditions of exploitation and operating the machines to prevent the pollution of the marine environment. While exploiting the diesel engine in general and Sulzer diesel engines in particular, ship owners are always eager to reduce the operating cost and still ensure the engine running are safe and reliable. Provide an example of how to calculate the amount of cylinder lubricating oil according to the theory of slow-speed marine engines. The article refers to the costs of the operation and exploitation of ship, offer solution to reduce extraction costs by optimizing the amount of lubricating oil for the cylinders. The analyses in the article are based on Sulzer RTA engines. The article also refers to the level of actual lubrication oil for the cylinders of slow-speed marine engines during operation and exploitation based on the practical experience of the chief engineers, who had ever worked with these engines. The optimal adjustment of cylinder lubricating oil of Sulzer RTA diesel engines to reduce the operating cost but still ensure the engine running are safe and reliable and the problems need to be noted in the process of adjustment.
Źródło:
Journal of KONES; 2017, 24, 1; 113-119
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Environmental emissions and efficiency of a direct injection diesel engine fueled with various fatty acid methyl esters
Autorzy:
Sairam, K.
Gopinath, A.
Velraj, R.
Powiązania:
https://bibliotekanauki.pl/articles/207516.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
direct injection
brakes
carbon monoxide
cottonseed oil
diesel engines
efficiency
engines
fatty acids
fuels
direct injection diesel engines
environmental emissions
exhaust gas temperature
fatty acid methyl ester
wtrysk bezpośredni
hamulce
tlenek węgla
olej z nasion bawełny
silniki wysokoprężne
wydajność
silniki
estryfikacja
estry
kwasy tłuszczowe
zużycie paliwa
paliwa
emisje gazów
silniki wysokoprężne z wtryskiem bezpośrednim
estry metylowe kwasów tłuszczowych
Opis:
Environmental emissions and efficiency of a direct injection diesel engine fueled with fatty acid methyl esters (FAMEs) have been experimentally investigated and compared with petro-diesel. Rubber seed oil methyl ester, cotton seed oil methyl ester, neem oil methyl ester, and mahua oil methyl ester were used as fuels. The brake specific fuel consumption, brake thermal efficiency, and exhaust gas temperature, nitrogen oxides, carbon monoxide, hydrocarbons, and smoke emissions were investigated. Mahua oil methyl ester exhibits higher brake thermal efficiency compared to other FAMEs. The NOx was found to be higher, while CO, HC, and smoke emissions of rubber seed oil methyl ester were lower than the other fuels at all loads.
Źródło:
Environment Protection Engineering; 2015, 41, 1; 125-135
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Entropy function application in the selection process of diagnostic parameters of marine diesel and gas turbine engines
Autorzy:
Korczewski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/963414.pdf
Data publikacji:
2010
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
marine diesel and gas turbine engines
diagnostics
diagnostic informativeness
entropy function
Opis:
The article presents the method of analysing the diagnostic informativeness of the parameters characterizing gas dynamic processes observed inside the working spaces of marine diesel and gas turbine engines. The entropy function was used as the measure of indeterminacy of the identified set of engine unserviceability states. Based on numerical simulation experiments of the analysed gasodynamic processes, the amount of introduced diagnostic information was assessed and the most adequate parameters for the technical state of the engine were selected. These parameters compose the minimised set of diagnostic parameters which make it possible to assess unmistakably the technical state of the examined working spaces.
Źródło:
Polish Maritime Research; 2010, 2; 29-35
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The reasons and adverse effect of internal diesel injector deposits formation
Przyczyny powstawania i szkodliwy wpływ wewnętrznych osadów we wtryskiwaczach silników o zapłonie samoczynnym
Autorzy:
Stępień, Z.
Powiązania:
https://bibliotekanauki.pl/articles/133807.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
internal diesel injection deposits
IDID injectors deposits type
high pressure common rail
HPCR engine fuel injection systems
Diesel engines
osady typu IDID
układy wtryskowe typu HPCR
silniki o zapłonie samoczynnym
Opis:
The paper report on the state of affairs so far in the scope of internal diesel injection deposits (IDID) issue affecting modern diesel high pressure common rail (HPCR) systems. Different types of deposits have been described and the factors supporting their creation. These deposits have been extensively studied to understand their formation mechanisms and composition. To this end an engine test procedure was developed to assess the deposit forming tendencies of various types. Findings of two long time dynamometer engine tests in which the course of the IDID formation and HPCR performance impairing was followed by measurement different engine parameters have been reported. Performance evaluation of HPCR injectors before and after tests have been presented also.
W artykule omówiono potencjalne przyczyny i skutki tworzenia się wewnętrznych osadów (IDID – Internal Diesel Injector Deposits w wysokociśnieniowych układach wtrysku paliwa typu HPCR (High Pressure Common Rail) silników o zapłonie samoczynnym. Opisano różne typy takich osadów oraz czynniki powodujące ich powstawanie. Przeprowadzono symulowane testy silnikowe, wg własnej metodyki badawczej, w których wytworzono przedmiotowe osady dwóch typów o różnym składzie i charakterze. Przedstawiono wyniki dwóch długotrwałych testów silnikowych, w których obserwowano przebieg powstawania IDID (i związane z tym pogarszanie właściwości użytkowych układu HPCR) poprzez monitorowanie różnych parametrów diagnostycznych silnika, a następnie ocenę wtryskiwaczy po testach.
Źródło:
Combustion Engines; 2014, 53, 1; 20-29
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of alternative configurations of ship power systems using biofuels and renewable energy
Autorzy:
Herdzik, J.
Powiązania:
https://bibliotekanauki.pl/articles/24201481.pdf
Data publikacji:
2023
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
biofuel
ship power systems
marine alternative fuels
carbon dioxide emission
energy efficiency indexes
renewable energy
dual and tri-fuel marine diesel engines
ship power system configuration
Opis:
The requirements to reduce emissions of carbon dioxide and other greenhouse gases from maritime transport require taking actions aimed at increasing the overall efficiency of the propulsion system, optimal and rational use of electricity and heat. Taking such actions is necessary in order to demonstrate the improvement of the energy efficiency index of a ship in operation or an already existing one (EEOI and EEXI), which will allow to obtain category A or B emissions for a given ship. Obtaining similar energy efficiency effects is also possible after switching to fuels containing less carbon in the molecule and the use of renewable energy. Attempts are made to create new configurations of combined energy systems so as to obtain maximum benefits related to the use of various energy sources in order to ensure the production of energy in quantities consistent with the current demand of the ship in the operating condition.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2023, 17, 3; 569--575
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis possibilities of cost reduction related to boil-off fuel gas being carried on LNG gas carriers
Analiza możliwości redukcji kosztów związanych z odparowaniem przewożonego ładunku na gazowcach typu LNG
Autorzy:
Giernalczyk, M.
Powiązania:
https://bibliotekanauki.pl/articles/243187.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport morski
gaz naturalny
gazowce LNG
spalinowe silniki tłokowe
turbiny gazowe
turbiny parowe
sea transportation
boil-off fuel gas
LNG carriers
diesel engines
gas and steam turbines
Opis:
Gas carried on LNG carriers is liquefaction gas at ambient pressure and temperature minus 163oC degree is subject to boil-off and causing increase in pressure. This phenomenon makes danger of explosion. The simplest possibility to circumvent the foresaid event is to release-liquefied gas to atmosphere. However, the mentioned way causes losses of cargo and air pollution. There is an option to re-condensate gas again nevertheless to do it extra energy is required. Method that is more rational is to use boil-off fuel gas as propulsion energy in diesel engines, gas and steam turbines. This paper describes exploitation costing of main propulsion on LNG carriers trying to find out the best solution. There are presented fuel gas supply system as well various type of engine driven by fuel gas. Moreover, author presents further design development of LNG carriers. Possibilities of cost reduction related to boil-off fuel gas, the Moss RS standard setup for gas reliquefaction system, example of dual fuel diesel engines and electric propulsion, basic design concept for two compressor units 100% type 6LP250-5S1, diagram of COGES system, thermal efficiencies for the different propulsion options, technical data of some present dual-fuel engines, as well two-stroke propulsion recommendations for LNG carriers are illustrated in the paper.
Źródło:
Journal of KONES; 2007, 14, 2; 153-160
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of operational characteristics of aviation diesel and gas turbine engines for light passenger aircraft
Analiza operacyjnych charakterystyk lotniczych silników diesla i silników turbin gazowych dla lżejszego samolotu pasażerskiego
Autorzy:
Loginov, V.
Ukraintes, Y.
Powiązania:
https://bibliotekanauki.pl/articles/213016.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
parametric shape
light passenger aircrafts
local airlines
aviation Diesel engines
turboprop engine
gas turbine engine
airplane engine
technical and economic characteristics
operational characteristics
life-cycle hour cost
Opis:
A comparative analysis of aviation diesel and gas turbine engines in the light passenger aircraft system was conducted. Aircraft operational characteristics were obtained with the help of developed modular software system „Integration-2.1". For the formation of 5-9 seater modifications of aircraft as a prototype was taken aircraft Diamond DA42 with the location of passengers without aisle, crew consisted of 1 person. For the formation of 10-20 sealer aircrafts modifications as prototypes were taken aircrafts EV-55 and L-410UVP, the crew consisted of 2 persons, was adopted the full completion of aircraft equipment, power plant consists of two engines was adopted. It shows the economic advisability of the aircraft gas turbine engines use for airplanes of local airlines (5-6 people). It was found that the life-cycle cost of the aircraft with more passengers become lower in modifications with gas turbine engines, therefore, the use of this type of engine is advisable for aircraft with greater passenger capacity. It was found that the main factors influencing the life-cycle cost of the aircraft, are the resource characteristics of the engine, the cost of its maintenance and repair, as well as the price of fuel.
Przeprowadzono analizę porównawczą lotniczych silników diesla i silników turbinowych dla lekkich samolotów pasażerskich. Eksploatacyjne charakterystyki samolotu uzyskane przez rozwinięty modułowy system oprogramowania „Integracja-2.1". Do opracowania modyfikacij 5-9 miejscowych samolotów jako punkt wyjściowy wybrano samolot Diamond DA42 z kabiną pasażerską bez korytarza i jednoosobową załogą. Do opracowania 10-20 miejscowych modyfikacji samolotów jako punkty wyjścia wybrano-samoloty EV-55 i L-410UVP, z dwuosobową załogą, przyjęty przez pełny skład sprzętu lotniczego, punkt mocy składa się z dwóch silników. Wykazano wykonalność ekonomiczną wykorzystania lotniczych turbin gazowych dla samolotów miejscowych linii lotniczych (do 5-6 osób). Stwierdzono, że koszt cyklu życiowego samolotu z wielką ilością pasażerów staje się mniejsza u modyfikacji z turbiną gazową, więc, wykorzystanie tego typu silników jest wskazane na samolotach o większej liczbie miejsc pasażerskich. Stwierdzono, że głównymi czynnikami wpływającymi na koszt cyklu życia samolotu, są cechy silnika, koszt jego utrzymania i naprawy, a także ceny paliwa.
Źródło:
Prace Instytutu Lotnictwa; 2016, 4 (245); 103-115
0509-6669
2300-5408
Pojawia się w:
Prace Instytutu Lotnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Contemporary diagnostic methods for ship engines: a report on scientific research activity of Polish Naval Academy in this field
Autorzy:
Korczewski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/258926.pdf
Data publikacji:
2008
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
marine diesel and gas turbine engines
technical diagnostics
base diagnostic system
operational examinations
Opis:
This paper devoted to ship combustion engine diagnostics, presents short characteristics of experimental test techniques applicable to state assessment of piston and gas turbine engines presently being in use in Polish Navy. Some metrological and organizational aspects of realization of necessary diagnostic tests as well as measurements of control parameters of engines of low susceptibility to control, were highlighted. Such engines are installed a.o. on board American origin frigates of Oliver Hazard Perry type as well as Norwegian origin submarines of Kobben type which have been recently incorporated into Polish Navy (i.e.General Electric turbine engines, Detroit Diesel and Mercedes Benz piston engines), as well as older engines of Russian production (Zorya turbine engines, Zvezda piston engines). Applicability of particular diagnostic methods was also assessed from the point of view of their effectiveness in identifying engine failures in conditions of its operation in ship power plant. Recently realized tests have made it possible to conduct operation of all piston and turbine engines used on board Polish Navy ships in accordance with their current technical state. On the average 120-130 diagnostic expertises are yearly issued, and the carried-out tests cover main functional systems of engines together with their control and safety subsystems.
Źródło:
Polish Maritime Research; 2008, 2; 46-58
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The protection of the environment during the operation of inland and coastal ships
Ochrona środowiska podczas eksploatacji statków żeglugi śródlądowej i przybrzeżnej
Autorzy:
Listewnik, J.
Powiązania:
https://bibliotekanauki.pl/articles/256073.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
żegluga śródlądowa
spalanie gazu
silnik okrętowy
niekonwencjonalne metody oczyszczania
zaolejone wody okrętowe
spaliny
inland shipping
burning gas
marine diesel engines
non-conventional method of purifying
ship's oily waters
exhaust gases
Opis:
This paper considers problems related to environment protection that occur during the operation of inland and coastal ships and proposes a means of changing the used fuel to gas fuel and applying a complex cleaning of both exhaust gases and oily ship's waters in a contact heat exchanger.
Artykuł dotyczy zagadnienia ochrony środowiska podczas eksploatacji statków żeglugi śródlądowej i przybrzeżnej, gdy następuje zmiana dotychczas używanego paliwa na paliwo gazowe. Równocześnie opisana została metoda zastosowania złożonego procesu jednoczesnego oczyszczania spalin oraz zaolejonych wód statkowych w kontaktowym przenośniku ciepła.
Źródło:
Problemy Eksploatacji; 2008, 1; 205-213
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Researches of possibilities of lowering the toxicity of ship diesel exhaust gases by changing the chosen control parameters
Badanie możliwości obniżenia toksyczności spalin silników okrętowych przez zmianę wybranych parametrów regulacyjnych
Autorzy:
Witkowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/242693.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
okrętowe silniki spalinowe
zanieczyszczenie atmosfery
ciśnienie powietrza doładowania
kąt wyprzedzenia wtrysku paliwa
diesel ship engines
atmospheric pollution
charging air pressure
fuel injection advance angle
Opis:
This paper describes the issues of atmospheric pollution created by ship engines. Not long ago the most important issue of ship engine construction was to lower fuel consumption and achieve high durability and reliability. In the recent years another problem has risen. A ship engine must meet more and more strict demands made on account of natural environment - the emission of toxic combustion products to the atmosphere. Although the share of ship engines in global toxic product emission was only 7% nitric oxides (NOx) and 4 - 5% sulphur oxides (SOx), the International Maritime Organization (IMO) and the Marine Environment Protection Committee (MEPC) in November of1990 proposed to reduce the emission of NOx by 70% and SOx by 50% by the year 2000. As the outcome of conducted procedures appropriate changes were made to MARPOL Convention in the form of Appendix VI. In this paper the effects of the influence of the chosen regulation parameters changes (charging air pressure and fuel injection advance angle) on the contents of the exhaust gasses of a diesel engine burning heavy oil fuel are presented and discussed. Necessary research was carried out in Gdynia Maritime Academy. Extraordinary attention was paid to successful reduction of nitric oxides (NOx) in the exhaust gasses. It was proven that decreasing the charging air pressure and increasing the fuel injection delay together lead to significant reduction of the amount of nitric oxides in ship engine exhaust gasses burning heavy oil fuel. Laboratory research was carried out using heavy fuels in a close-to-real environment. Therefore their results may be taken under consideration by ship owners. Considering the possibility of making necessary adjustments by the ship crew, which would lead to similar results, this method could also be used in practice, especially on older engines which usually do not conform to MARPOL Convention, Appendix VI with their nitric oxides emissions.
Artykuł poświęcony jest problemom związanym z zanieczyszczaniem atmosfery przez silniki okrętowe. Do niedawna najważniejszym problemem w budowie silników okrętowych było zmniejszenie zużycia paliwa oraz osiągnięcie ich dużej trwałości i niezawodności. W ostatnich latach pojawił się kolejny problem. Silnik okrętowy musi spełniać coraz ostrzejsze wymagania stawiane ze względu na ochronęśrodowiska naturalnego - emisję toksycznych produktów spalania do atmosfery. Wprawdzie udział silników okrętowych w emisji toksycznych składników wynosi w skali globalnej około 7% w przypadku tlenków azotu (NOx) i 4-5% dla tlenków siarki (SOx), to jednak Międzynarodowa Organizacja Morska (IMO) i Komitet d/s Ochrony Środowiska Morskiego (Marine Environment Protection Committee - MEPC) przy IMO, w listopadzie 1990 roku zaproponowały zmniejszenie emisji do 2000 roku NOx o 70% i SOx o 50%. W wyniku prowadzonej procedury legislacyjnej odpowiednie zapisy wprowadzono do konwencji MARPOL w postaci załącznika VI. W artykule zaprezentowano i przedyskutowano poparte wynikami badań laboratoryjnych przeprowadzonych w Akademii Morskiej w Gdyni rezultaty wpływu zmian wybranych parametrów regulacyjnych (ciśnienia powietrza ładującego i kąta wyprzedzenia wtrysku) na skład spalin silnika wysokoprężnego zasilanego paliwem ciężkim. W badaniach w szczególności zwracano uwagę na skuteczną możliwość obniżenia w spalinach zawartości tlenków azotu (NOx). Wykazano, że spadek ciśnienia powietrza ładującego i wzrost opóźnienia wtrysku paliwa wprowadzone łącznie, prowadzą do istotnego obniżenia zawartości tlenków azotu w spalinach silnika okrętowego pracującego na paliwie ciężkim. Badania laboratoryjne przeprowadzono na paliwach ciężkich, a więc w warunkach zbliżonych do rzeczywistych. Ich rezultaty mogą być więc brane pod uwagę przez armatorów. Z uwagi na możliwość wykonania przez załogę statku regulacji silnika pozwalającej na osiągnięcie podobnych rezultatów, metoda sprawdzona w badaniach laboratoryjnych, może być również właściwa w praktyce, szczególnie w odniesieniu do silników wcześniej budowanych, które zazwyczaj nie spełniają normy emisji tlenków azotu wskazanej w załączniku VI Konwencji MARPOL.
Źródło:
Journal of KONES; 2007, 14, 4; 531-536
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Operational evaluation of piston-rings-cylinder liner assembly wear in high power marine diesel engines
Eksploatacyjna ocena zużycia układu tribologicznego tłok–pierścień–cylinder okrętowych silników spalinowych dużych mocy
Autorzy:
Adamkiewicz, A.
Drzewieniecki, J.
Powiązania:
https://bibliotekanauki.pl/articles/187972.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
tribological wear
piston–piston rings–cylinder liner assembly
high power diesel engines
marine main propulsion
top layer
scavenge ports
zużycie tribologiczne
układ tłok-pierścienie tłokowe-tuleja cylindrowa
silniki spalinowe dużych mocy
napęd główny statku
warstwa wierzchnia
okna przepłukujące
Opis:
This paper presents an operational evaluation of piston-piston rings-cylinder liner (PRC) assembly wear in marine diesel engines of high power. It is based on visual inspection through cylinder liner scavenge ports. Clearance measurements of piston rings in piston grooves and piston ring gap measurements were used to evaluate the extent of wear of the PRC assembly. Moreover, it is shown that piston ring gap measurements can be used as a reference parameter in wear trend analysis to predict the length of time periods between overhauls (TBO). Furthermore, it has been shown that controlling the wear of chromium (protective) layers of piston ring working surfaces by measuring their thickness with induction and eddy current methods is highly useful. They were accepted as a source of information on PRC lubrication correctness and as a symptom of its technical condition. Factors indicating the necessity of an overhaul and introducing operational methods of improving working conditions between the tribological pair – liner and piston rings have been determined.
W artykule przedstawiono metodę eksploatacyjnej oceny zużycia układu tribologicznego: tłok–pierścienie tłokowe–tuleja cylindrowa (TPC) okrętowego silnika spalinowego dużej mocy. Metoda oparta jest na wynikach inspekcji wizualnych z wykorzystaniem okien przepłukujących tulei cylindrowych. Do oceny stopnia zużycia układu TPC wykorzystano pomiary luzów między pierścieniami a rowkami tłoka oraz pomiary luzu w zamkach. Wykazano, że wyniki pomiarów luzów w zamkach pierścieni tłokowych mogą być miarami stopnia zużycia wykorzystywanymi jako parametry referencyjne w analizie trendu zużycia do prognozowania okresów pomiędzy przeglądami. Pokazano przydatność kontroli zużywania się warstw wierzchnich roboczych powierzchni pierścieni tłokowych (pokrytych powłokami ochronnymi) metodami indukcyjnymi. Otrzymane oceny zużycia tribologicznego weryfikowano na podstawie wyników analizy oleju cylindrowego pobieranego z komór podtłokowych silnika. Uznano je za źródło informacji o poprawności smarowania układu TPC oraz jako symptom stanu technicznego układu. Określono czynniki wyznaczające konieczność przeprowadzenia remontu oraz wprowadzenia eksploatacyjnych metod poprawy warunków współpracy układu tribologicznego tuleja cylindrowa–pierścienie tłokowe.
Źródło:
Tribologia; 2017, 271, 1; 5-15
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Injection system assessment to optimize performance and emissions of a non - road heavy duty diesel engine : experiments and CFD modelling
Autorzy:
Auriemma, M.
Iannuzzi, S.
Powiązania:
https://bibliotekanauki.pl/articles/246478.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel combustion
heavy duty engines
STAR-CD
Opis:
The advancing emissions requirements and the customer demand for increased performance and fuel efficiency are forcing the diesel engine technology to keep improving. In particular, the large diesel engines are undergoing to a significant restriction in emission standards. Reaching the new limits requires innovative solutions, improved calibration and controls of the engine combustion technology, as well as the optimization of the injection system that has experienced the most fundamental development over the last decade. The objective of the paper is to present preliminary results of an investigation for the development of an efficient combustion system for marine diesel engines. The effect of different engine parameters on performance and engine out emissions were evaluated. Specifically, different nozzle geometries, injection pressure, injection timings were taken into account. The investigation was carried out both experimentally and numerically. Three different nozzles geometries for three different values of the start of injection were tested. The in-cylinder pressure, rate of heat release, NOx and soot were evaluated for a high load engine condition. The experimental activity was carried out on a large displacement single cylinder direct injection diesel engine equipped with a high-pressure common rail injection system able to manage multiple injections. The engine test bench was equipped with an external air supercharger able to set high air boost levels. The system controls the intake air temperature by means of a heater exchanger. The numerical investigation was carried out using the commercial CFD STAR-CD code in a three-dimensional domain including the cylinder head and piston bowl. Combustion behaviour was simulated using the 3 Zones Extended Coherent Flame Model (ECFM3Z).
Źródło:
Journal of KONES; 2012, 19, 3; 19-30
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The application of non-converted vegetable oils in contemporary self-ignition engines
Autorzy:
Reksa, M.
Powiązania:
https://bibliotekanauki.pl/articles/245366.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
vegetable oils
diesel engine
alternative fuels
Opis:
The paper presents a test of a self-ignition engine equipped with high-pressure fuel-dosing system based on injection units with electronic control system. The engine was fuelled with conventional fuel and few kinds of non-converted vegetable oil. The analysis of the experiment results correlated with knowledge of their properties shows the important conclusions about possibilities, disadvantages and perspectives of the fuels usage in contemporary engines equipped with electronic control fuel-dosing system. The vegetable oils have a special place in history of automotive industry. In 1900 a great event on Word Trades in Paris was compression-ignition engine fuelled by groundnuts oil — a masterpiece of no one else like Rudolf Diesel. R. Diesel, aware of conventional fuels limitation, patented in 1892 a vegetable oil as a fuel. The NOx concentration in exhaust was measuredfor maximum engine speed (1900 rpm). The lowest emission ofmeasured compounds was observed in case of sunflower oil and rape oil "Biedronka" (65% and 75% of emission during engine work fuelled by conventional diesel oil). The highest values were detected for post frying palm oil and rape oil "Aldi" (120% of emission during engine work fuelled by conventional diesel oil).
Źródło:
Journal of KONES; 2009, 16, 4; 385-391
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Możliwość zastosowania silnika Diesla w lekkim śmigłowcu
Diesel engine applicability in a light helicopter
Autorzy:
Magryta, P.
Majczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/310885.pdf
Data publikacji:
2012
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
silnik Diesla
silniki turbinowe
śmigłowce
diesel engine
helicopters
turbine engines
Opis:
W artykule zaprezentowano koncepcję zastosowania silnika Diesla jako jednostki napędowej lekkiego śmigłowca. Przedstawiono zalety i wady takiego rozwiązania w porównaniu z obecnie stosowanymi silnikami turbowałowymi. Proponowany silnik jest proekologiczną jednostką napędową ze względu na znacznie mniejszą emisję toksycznych składników spalin w porównaniu do silników turbowałowych. Jednocześnie poruszono problemy, które muszą być uwzględnione w aspekcie zamontowania silnika Diesla w śmigłowcu. Przedstawiono również główne parametry silnika, którymi powinien się on charakteryzować, aby zapewnić wymaganą moc i osiągi niezbędne do napędu lekkiego śmigłowca.
The paper presents the concept of a diesel engine application as a power unit in a lightweight helicopter. The authors present the advantages and disadvantages of this design compared to existing turbine engines. The proposed engine is eco-friendly power unit due to the much less toxic exhaust emissions compared to turbo shaft engines. The paper also presents the problems that must be considered in the context of a diesel engine mounted in the helicopter. In the end the paper the main engine parameters, which should be characterized to ensure the required power and performance necessary to drive a light helicopter are presented.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2012, 13, 4; 98-103
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of different biofuels on common rail injector flow rate
Autorzy:
Rybak, A.
Hunicz, J.
Krzaczek, P.
Golimowski, W.
Marcinkowski, D.
Powiązania:
https://bibliotekanauki.pl/articles/133525.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
oils
lubrication
engines
injector
diesel
biodiesel
oleje
nawilżanie
silnik
wtryskiwacz
Opis:
In this study dynamic flow rates of a common rail injector using diesel fuel and different biofuels were determined. As biofuels, fatty acid methyl esters originating from canola, poultry, cattle and used cooking oil were tested. The tested fuels exhibited different physical properties e.g. density and viscosity. Measurements of the injector delivery rates were performed on a test stand designed for determination of injectors and injection pumps characteristics. Each fuel was tested at temperatures between 30 and 60°C, under injection pressure in the range of 30–180 MPa and injection time in the range of 200–1600 microseconds. The results showed differences in injector flow rates depending on used fuel, however different fuel properties affected amount of fuel injected especially at short injection durations.
Źródło:
Combustion Engines; 2017, 56, 4; 39-43
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative researches of lube oil consumptions engine WOLA S12-U with composite pistons
Autorzy:
Kołomecki, J.
Powiązania:
https://bibliotekanauki.pl/articles/241861.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
diesel engine
composite pistons
lube oil consumption
engine tests
Opis:
An object of the paper are test results of the lube oil consumption in reference to two versions of standard and novel pistons worked out within the framework of the project of developmental No. O R00 0052 05 under the title "The elaboration of the modern technology of composite materials of the novel generation to uses on the pistons of combustion engines to military uses". The project was coordinated by Institute of Aviation; a project manager was Antoni Jankowski. Unique properties, which are characterized by worked out novel material, mainly high hardness and strength, the low hysteresis and coefficient of thermal expansion ....create many novel opportunities. As one of essential evaluation criteria of the novel piston, is lube oil consumption what is the object of the paper. The researches of the pistons were performed in WOLA S12-U engine. Novel solution of the pistons lets on the optimization of the shape of the piston and decreasing of the clearances between piston and cylinder. This causes decreasing of the lube oil consumption, decreasing of blowthroughs to the crank case, decreasing of the noise level and the vibration and the emission level of harmful components of exhaust gases; the improvement of the durability and dependability of the work of the engine and the pistons; increasing of mechanical loads , the pressure increasing combustion , and to the same opportunities increasing of the engine power and the BSFC decreasing.
Źródło:
Journal of KONES; 2012, 19, 4; 315-320
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental investigation of the combustion of vegetable oils in diesel engine at low engine loads
Autorzy:
Błažek, J.
Vojtišek, M.
Powiązania:
https://bibliotekanauki.pl/articles/243132.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
vegetable oils
diesel fuels
in-cylinderpressure measurement system
combustion engines
emissions
Opis:
Vegetable oils are being increasingly used as fuel in diesel engines in passenger vehicles, with various results. One of the associated problems is excessive emissions of organic compounds at very low engine loads. Aside from an undesirable increase in emissions, such compounds also contribute to the formation of deposits in the engine and in the catalytic reactor. In this study, a typical turbodiesel engine, adapted for operation on vegetable oils, was fitted with fast-response in-cylinder pressure measurement system. The engine was operated on an engine dynamometer at low loads typical for urban driving at several coolant and fuel temperatures. Results will be presented and discussed. Engine and rapeseed oil fuelling system setup, comparison of combustion timing of diesel fuel and rapeseed oil, indicated in-cylinder pressure for diesel fuel and rapeseed oil for different speeds and loads, indicated in-cylinder pressure at original and modified injection timing, comparison of nox and CO2 concentrations at original injection timing, emissions from rapeseed oil relative to diesel fuel at different speeds and loads, effect of injection timing optimization on peak indicated pressure, effect of injection timing optimization on nox and CO concentrations, Brake-specific fuel consumption, are presented in the paper.
Źródło:
Journal of KONES; 2007, 14, 3; 61-72
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nitrogen oxides emission estimator for a diesel engine use to reduce the emission of harmful substances in exhaust gas to environment
Autorzy:
Graba, M.
Mamala, J
Bieniek, A.
Hennek, K.
Powiązania:
https://bibliotekanauki.pl/articles/246302.pdf
Data publikacji:
2017
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
nitrogen oxides emission
diesel engine
estimation
combustion engines
air pollution
environmental protection
Opis:
This article reports the results of experimental and numerical analysis of emissions of nitrogen oxides in exhaust gas to the environment from a turbocharged diesel engine of a tractor. The problem of identifying nitrogen oxides emissions from the exhaust gases was formulated and subsequently solved, based on data gained from measurements. The results of estimation of nitrogen oxides emissions were verified on the basis of research on a test object. The object of the study and a non-linear static model of nitrogen oxides emission were also described for two systems – with and without exhaust gas recirculation. The article demonstrates that the use of an adequately selected mathematical model can lead to the estimation of emissions of nitrogen oxides contained in the exhaust gas of diesel engines in an off-road vehicle. The created model can be used to control the valve of the exhaust gas of recirculation system and so reduce the emission of harmful substances to the environment. The presented research results show the comparison of estimated and measured nitrogen oxides concentration. The estimated value from the mathematical model concentration is about from 0.7 s to 1 s earlier than the value measured by the sensor, therefore the exhaust gas recirculation system could be controlled accordingly before nitrogen oxides are formed.
Źródło:
Journal of KONES; 2017, 24, 3; 87-94
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the impact of combustion hydrogen addition on operating properties of self-ignition engine
Ocena wpływu spalania dodatku wodoru na własności eksploatacyjne silnika o zapłonie samoczynnym
Autorzy:
Kruczyński, S.
Ślęzak, M.
Gis, W.
Orliński, P.
Powiązania:
https://bibliotekanauki.pl/articles/1365770.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
IC engines
hydrogen
diesel
heat emission
silniki spalinowe
wodór
olej napędowy
wydzielanie się ciepła
Opis:
The work presents the results of effect of the addition of hydrogen in an amount up to 9% of mass of diesel oil into the intake system of Perkins1104C-E44TA engine. The impact of hydrogen addition on process heat release in the combustion chamber and the concentration of CO, THC, NOX and PM in the exhaust at predetermined engine operating conditions. It was summarised that the analysis of the results does not justify the use of hydrogen as a fuel additive in self-ignition engines.
W pracy przedstawiono wyniki badań wpływu dodatku wodoru w ilości do 9% masy oleju napędowego do układu dolotowego silnika Perkins1104C-E44T. Oceniono wpływ dodatku na proces wydzielania ciepła w komorze spalanie i stężenia CO, THC, NOX i PM w spalinach w ustalonych warunkach pracy silnika. W podsumowaniu stwierdzono iż analiza wyników badań nie uzasadnia stosowania wodoru jako dodatku do paliwa w silnikach o zapłonie samoczynnym.
Źródło:
Eksploatacja i Niezawodność; 2016, 18, 3; 343-347
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of the injection timing on the performance of two-stroke opposed-piston diesel engine
Autorzy:
Karpiński, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/117835.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Promocji Wiedzy
Tematy:
diesel engine
opposed piston engines
two-stroke engine
injection timing
silnik wysokoprężny
przeciwstawne silniki tłokowe
silnik dwusuwowy
czas wtrysku
Opis:
The performance of the engine strongly depends on the parameters of the combustion process. In compression ignition engines, the fuel injection timing has a significant influence on this process. The moment of its occurrence and its duration should be chosen so that the maximum pressure value occurs several degrees after TDC. In order to analyze the effect of the fuel injection timing on the performance of the tested two-stroke opposed-piston diesel engine, a zero-dimensional model was developed in the AVL BOOST program. Next, a series of simulations were performed based on the defined calculation points for maximum continuous power, which resulted in power, specific fuel consumption and mean in-cylinder pressure. Finally, the engine map was made as a function of the start of combustion angle.
Źródło:
Applied Computer Science; 2018, 14, 2; 69-81
1895-3735
Pojawia się w:
Applied Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Interaction testing of rapeseed methyl esters and their blends with diesel fuel on elastomers
Badania wzajemnego oddziaływania estrów metylowych oleju rzepakowego i ich mieszanin z olejem napędowym z elastomerami
Autorzy:
Baczewski, K.
Powiązania:
https://bibliotekanauki.pl/articles/243167.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
silniki spalinowe estry metylowe oleju rzepakowego (RME)
olej napędowy
elastomery
combustion engines
rapeseed methyl esters (RME)
diesel fuel
elastomers
Opis:
Several elastomers used as seals not compatibility with fatty acid methyl esters (FAME). The paper presents the results of laboratory investigations of five various elastomers (polyethylene rubber, fluorine rubber, butadiene-acrylonitryle rubber, epichlorodidrine rubber and commercial gasoline-resistant rubber) interaction of rapeseed methyl esters (RME) and their blends with diesel fuel. The test results showed that the elastomers made ofpolyethylene rubber and fluorine rubber are compatible with rapeseed methyl esters. The butadiene-acrylonitryle rubber, epichlorodidrine rubber and commercial gasoline-resistant rubber elastomers exhibited changes in physical properties: swelling in crease and hardness reduce in comparison with diesel fuel. Aged rapeseed methyl esters are more active to elastomers in comparison with fresh rapeseed methyl esters. The blends of rapeseed methyl esters with diesel fuel cause high changes of those elastomers volume, mass and hardness, already for blends contain 5% (by volume) of rapeseed methyl esters in comparison to diesel fuel.
Wiele elastomerów stosowanych na uszczelnienia jest mało odpornych na działanie estrów metylowych kwasów tłuszczowych (FAME). W referacie przedstawiono wyniki badań laboratoryjnych wzajemnego oddziaływania pięciu różnych elastomerów (z polietylenu, z kauczuku fluorowego, z kauczuku butadienowo-akrylonitrylowego, z kauczuku epichlorohydrynowego i handlowej gumy benzynoodpornej) z estrami metylowymi oleju rzepakowego (RME) i ich mieszaninami z olejem napędowym. Stwierdzono, że próbki elastomerów polietylenowych i z kauczuku fluorowego są odporne na działanie estrów metylowych oleju rzepakowego. Estry metylowe oleju rzepakowego powodują wzrost pęcznienia i spadek twardości elastomerów z kauczuku butadienowo-akrylonitrylowego, z kauczuku epichlorohydrynowego i z handlowej gumy benzynoodpornej. W porównaniu z olejem napędowym zestarzone estry metylowe oleju rzepakowego są bardziej aktywne w stosunku do elastomerów niż świeże estry metylowe oleju rzepakowego. Także mieszaniny estrów metylowych oleju rzepakowego z olejem napędowym powodują duże zmiany objętości, masy i twardości tych elastomerów, już przy zawartości 5% (objętościowo) estrów metylowych oleju rzepakowego w mieszaninie z olejem napędowym w porównaniu z olejem napędowym.
Źródło:
Journal of KONES; 2007, 14, 2; 19-25
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies