Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Turos, A." wg kryterium: Autor


Tytuł:
Accelerators in materials research
Autorzy:
Turos, A.
Powiązania:
https://bibliotekanauki.pl/articles/147928.pdf
Data publikacji:
2005
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
materials research
accelerators
ion beam modification
ion beam analysis
Opis:
Abstract Since at least forty years accelerators of charged particles no longer belong to nuclear physics exclusively. This is especially true for accelerators at energies below 1 GeV. The vast majority of accelerators in this energy range is used for materials research and medicine. In materials research the applications are principally twofold: modifications of solids and surface layer microanalysis. Two most important challenges for materials research at the beginning of XXI century as determined by the Materials Research Society are: development of materials able to repair human body and development of materials for new electronic devices able to cope with the enormous amount of information to be stored and transmitted. The role of accelerators with regard to the challenges of modern technology will be discussed.
Źródło:
Nukleonika; 2005, 50,suppl.3; 11-15
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heterogeneous Amorphization of P and As Implanted GaAs at Low Temperatures
Autorzy:
Krynicki, J.
Rzewuski, H.
Turos, A.
Powiązania:
https://bibliotekanauki.pl/articles/1924215.pdf
Data publikacji:
1992-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.80.Jh
61.70.Tm
Opis:
Amorphization of P and As implanted GaAs at liquid nitrogen temperature has been investigated. The post-implantation damage was measured by means of Rutherford Backscattering (RBS) He$\text{}^{+}$ channeling technique. The critical dose and critical energy densities for amorphization were determined. From the results obtained it is concluded that for both ions the amorphization process can be satisfactorily described by the heterogeneous model.
Źródło:
Acta Physica Polonica A; 1992, 82, 5; 871-875
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of Phosphorus Release during Annealing of Au Contacts to InP
Autorzy:
Piotrowska, A.
Kamińska, E.
Kwiatkowski, S.
Turos, A.
Powiązania:
https://bibliotekanauki.pl/articles/1923864.pdf
Data publikacji:
1992-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.40.Ns
Opis:
The analysis of phosphorus release from Au/InP contacts heat treated at temperature from the range 360-480°C showed that P evaporation accompanies any stage of contact reaction. The use of encapsulating layer during contact annealing suppresses the loss of phosphorus and changes the kinetics of thermally activated interfacial reaction.
Źródło:
Acta Physica Polonica A; 1992, 82, 5; 849-852
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
HRXRD study of ZnO single crystals bombarded with Ar ions
Badanie metodami wysokorozdzielczej dyfraktometrii rentgenowskiej monokryształów ZnO bombardowanych jonami Ar
Autorzy:
Wójcik, M.
Gaca, J.
Caban, P.
Turos, A.
Powiązania:
https://bibliotekanauki.pl/articles/192341.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Materiałów Elektronicznych
Tematy:
HRXRD
ZnO monocrystal
ion implantation
radiation defect analysis
wysokorozdzielcza dyfrakcja rentgenowska
monokryształ ZnO
implantacja jonów
analiza defektów radiacyjnych
Opis:
High resolution X-ray diffraction methods (HRXRD) were used to study the tetragonalization of a unit cell in a zinc oxide single crystal resulting from the Ar-ion bombardment. Bulk ZnO (00∙1) single crystals were bombarded with ions with the energy of 300 keV and a dose range between 1 x 1014 cm-2 and 4 x 1016 cm-2. Diffraction profiles, obtained by radial 2Theta/Omega scans in the vicinity of the 00∙4 ZnO reciprocal space node were measured and fitted to the curves calculated by means of a computer program based on the Darwin’s dynamical theory of X-ray diffraction. On the basis of these numerical simulations, the profile of the interplanar spacing between planes perpendicular to the c axis of the ZnO single crystal were determined as a function of the Ar ion dose. It was found that positive deformation parallel to the c-axis appeared for the low doses in the bombarded crystal volume. When the dose is increased this deformation gets ronounced, and after reaching a certain critical value, it becomes saturated. This observation leads to the conclusion that the plastic deformation appears in the implanted volume of the crystal.
Za pomocą wysokorozdzielczej dyfraktometrii rentgenowskiej (HRXRD) badano tetragonalizację komórki elementarnej monokryształu tlenku cynku powstałą pod wpływem bombardowania jonami Ar. Objętościowe monokryształy ZnO o orientacji (00∙1) były bombardowane jonami o energii 300 keV, w przedziale dawek od 1 x 1014 cm-2 do 4 x 1016 cm-2. Zarejestrowano profile dyfrakcyjne otrzymane metodą radialnego skanowania 2Teta/Omega, w otoczeniu węzła 00∙4, sieci odwrotnej ZnO i w oparciu o założenia dynamicznej teorii dyfrakcji promieniowania rentgenowskiego w ujęciu Darwina, wykonano ich symulacje numeryczne. Na tej podstawie określono, w zależności od dawki, profil zmiany odległości płaszczyzn prostopadłych do osi c monokryształu ZnO. Stwierdzono, że dla niskich dawek, w ściśle określonej objętości kryształu, powstaje dodatnie odkształcenie równoległe do osi c, wraz ze wzrostem dawki jonów to odkształcenie wzrasta, a po osiągnięciu pewnej krytycznej wartości ulega nasyceniu. To prowadzi do wniosku, że w implantowanej objętości kryształu powstaje wówczas odkształcenie plastyczne.
Źródło:
Materiały Elektroniczne; 2016, T. 44, nr 3, 3; 9-16
0209-0058
Pojawia się w:
Materiały Elektroniczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Defect Transformations in Ion Bombarded InGaAsP
Autorzy:
Ratajczak, R.
Turos, A.
Stonert, A.
Nowicki, L.
Strupiński, W.
Powiązania:
https://bibliotekanauki.pl/articles/1504046.pdf
Data publikacji:
2011-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.43.-j
61.72.-y
81.05.-t
82.80.-d
85.40.-e
Opis:
Damage buildup and defect transformations at temperatures ranging from 15 K to 300 K in ion bombarded InGaAsP epitaxial layers on InP were studied by in situ Rutherford backscattering/channeling measurements using 1.4 MeV $\text{}^4He$ ions. Ion bombardment was performed using 150 keV N ions and 580 keV As ions to fluences ranging from 5 × $10^{12}$ to 6 × $10^{14}$ at./$cm^2$. Damage distributions were determined using the McChasy Monte Carlo simulation code assuming that they consist of randomly displaced lattice atoms and extended defects producing bending of atomic planes. Steep damage buildup up to amorphisation with increasing ion fluence was observed. Defect production rate increases with the ion mass and decreases with the implantation temperature. Parameters of damage buildup were evaluated in the frame of the multi-step damage accumulation model. Following ion bombardment at 15 K defect transformations upon warming up to 300 K have also been studied. Defect migration beginning above 100 K was revealed leading to a broad defect recovery stage with the activation energy of 0.1 eV for randomly displaced atoms and 0.15 eV for bent channels defects.
Źródło:
Acta Physica Polonica A; 2011, 120, 1; 136-139
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Lattice Deformation in Al$\text{}_{x}$Ga$\text{}_{1-x}$As Epitaxial Layers Caused by Implantation with High Doses of 1 Mev Si Ions
Autorzy:
Wieteska, K.
Wierzchowski, W.
Graeff, W.
Turos, A.
Grötzschel, R.
Powiązania:
https://bibliotekanauki.pl/articles/2011027.pdf
Data publikacji:
1999-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.10.-i
61.80.-x
Opis:
A series of highly perfect Al$\text{}_{0.45}$Ga$\text{}_{0.55}$ As epitaxial layers implanted with 1 MeV Si ions to the doses in a range 7×10$\text{}^{13}$-2×10$\text{}^{15}$ ions/cm$\text{}^{2}$ were studied with various conventional and synchrotron X-ray diffraction methods. The presently used methods allowed both the measurement of lattice parameter changes and strain induced deformation. The evaluation of complete strain profiles was also performed by numerical simulation of diffraction curves. It was found that the implantation induced considerable change of lattice parameter reached the maximum at the dose 3×10$\text{}^{14}$ ions/cm$\text{}^{2}$. The recorded curves proved also that the lattice parameter is almost constant in the near surface region of the implanted layers. The applied doses did not cause lattice amorphisation at room temperature.
Źródło:
Acta Physica Polonica A; 1999, 96, 2; 289-293
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza odkształceń sieci krystalicznej w sąsiedztwie dyslokacji
Analysis of crystal lattice deformations in the vicinity of dislocations
Autorzy:
Jóźwik, P.
Turos, A.
Jagielski, J.
Natarajan, S.
Nowicki, L.
Powiązania:
https://bibliotekanauki.pl/articles/192188.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Materiałów Elektronicznych
Tematy:
analiza defektów złożonych
kanałowanie jonów
symulacje Monte Carlo
complex defect analysis
ion channeling
Monte Carlo simulations
Opis:
W pracy opisano procedury symulacji Monte Carlo procesu rozpraszania wstecznego w kryształach zawierających dyslokacje. Sigmoidalny kształt ugiętych rzędów (płaszczyzn) atomowych można przybliżyć funkcją arctan, co stanowi model dystorsji sieci krystalicznej w pobliżu półpłaszczyzny dyslokacji krawędziowej. Badania strukturalne kryształów AlGaN i SrTiO3 za pomocą HRTEM pozwoliły wyznaczyć parametry geometryczne zaburzeń sieci krystalicznej w sąsiedztwie dyslokacji (kąt ugięcia w punkcie przegięcia funkcji arctan oraz odległość między jej asymptotami). Zależność każdego z tych parametrów od odległości od krawędzi dyslokacji można przybliżyć funkcją ekspotencjalnego zaniku i wyznaczyć współczynniki tej funkcji. Dane te zostały wykorzystane w symulacjach Monte Carlo widm rozpraszania wstecznego AlGaN oraz SrTiO3 i pozwoliły na ilościową parametryzację rozkładu dyslokacji w defektowanych kryształach.
A procedure of Monte Carlo simulation of a backscattering process in crystals containing dislocations was described in this publication. Sigmoidally bent atomic rows (planes) can be approximated by an arctan function being a model of the lattice distortion in the vicinity of a dislocation. HRTEM analysis of AlGaN and SrTiO3 crystals allowed determination of the geometrical parameters of crystalline structure distortion in the vicinity of a dislocation (a bending angle at the inflexion point of the arctan function as well as the distance between its asymptotes). A dependence of each of these parameters on the distance from a dislocation edge can be approximated by an exponential decay function. The parameters of this function can be calculated from the experimental data. The parameters obtained were used in Monte Carlo simulation of the backscattering process in AlGaN and SrTiO3 and enabled quantitative determination of the depth distribution of dislocations in defected crystals.
Źródło:
Materiały Elektroniczne; 2015, T. 43, nr 2, 2; 18-26
0209-0058
Pojawia się w:
Materiały Elektroniczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
X-ray Standing Waves and Rutherford backscattering Studies of the Structure of Si Single Crystals Implanted with Fe Ions
Autorzy:
Vartanyantz, I. A.
Auleytner, J.
Nowicki, L.
Kwiatkowski, S.
Turos, A.
Powiązania:
https://bibliotekanauki.pl/articles/1945411.pdf
Data publikacji:
1996-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.10.-i
Opis:
The X-ray standing wave and Rutherford backscattering spectroscopy in channelling geometry were applied for the investigation of the structure of silicon single crystals implanted with 80 keV Fe ions. Both methods were used for the determination of crystal damage and lattice location of implanted metal atoms before and after thermal annealing. Both methods gave consistent results regarding the amorphization of Si due to the Fe-ion implantation. Moreover, using both methods some Fe substitution fraction was determined. The depth profiles of implanted atoms were compared to the results of computer simulations. Complementary use of X-ray standing wave and Rutherford backscattering spectroscopy channelling techniques for studies of radiation damage and lattice location of implanted atoms is discussed.
Źródło:
Acta Physica Polonica A; 1996, 89, 5-6; 625-633
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stopping Power and Energy Straggling of Channeled He-Ions in GaN
Autorzy:
Turos, A.
Ratajczak, R.
Pągowska, K.
Nowicki, L.
Stonert, A.
Caban, P.
Powiązania:
https://bibliotekanauki.pl/articles/1504098.pdf
Data publikacji:
2011-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.82.Fk
61.85.+p
68.55.Ln
68.35.Dv
Opis:
GaN epitaxial layers are usually grown on sapphire substrates. To avoid disastrous effect of the large lattice mismatch a thin polycrystalline nucleation layer is grown at 500°C followed by the deposition of thick GaN template at much higher temperature. Remnants of the nucleation layer were visualized by transmission electron microscopy as defect agglomeration at the GaN/sapphire interface and provide a very useful depth marker for the measurement of channeled ions stopping power. Random and aligned spectra of He ions incident at energies ranging from 1.7 to 3.7 MeV have been measured and evaluated using the Monte Carlo simulation code McChasy. Impact parameter dependent stopping power has been calculated for channeling direction and its parameters have been adjusted according to experimental data. For virgin, i.e. as grown, samples, the ratio of channeled to random stopping power is constant and amounts to 0.7 in the energy range studied. Defects produced by ion implantation largely influence the stopping power. For channeled ions the variety of possible trajectories leads to different energy loss at a given depth, thus resulting in much larger energy straggling than that for the random path. Beam energy distributions at different depths have been calculated using the McChasy code. They are significantly broader than those predicted by the Bohr formula for random direction.
Źródło:
Acta Physica Polonica A; 2011, 120, 1; 163-166
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dual Role of TiN Reaction Barrier in Gold Based Metallization to GaAs
Autorzy:
Piotrowska, A.
Kamińska, E.
Guziewicz, M.
Adamczewska, J.
Kwiatkowski, S.
Turos, A.
Powiązania:
https://bibliotekanauki.pl/articles/1923915.pdf
Data publikacji:
1992-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.40.Ns
Opis:
Reactively sputtered TiN films were evaluated as annealing cap improving the formation of Au(Zn) ohmic contact and as antidiffusion barrier protecting contact metallization and underlying GaAs against reaction with Au overlayers.
Źródło:
Acta Physica Polonica A; 1992, 82, 5; 857-860
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electron Microscopy and X-ray Diffraction Study of AlN Layers
Autorzy:
Kowalczyk, A.
Jagoda, A.
Mücklich, A.
Matz, W.
Pawłowska, M.
Ratajczak, R.
Turos, A.
Powiązania:
https://bibliotekanauki.pl/articles/2035486.pdf
Data publikacji:
2002-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
52.77.Dq
Opis:
AlN nanocrystalline layers and superstructures are used in the modern optoelectronic technology as reflecting mirrors in semiconductor lasers. In the present work the properties of AlN films prepared by sputtering methods from an AlN target in reactive Ar + N plasma were investigated. The characterisation was performed with HRTEM, SEM, glancing angle XRD and RBS methods. The present measurements confirmed the polycrystalline structure of AlN layers and enabled the evaluation of their grain size. The roughness and thickness of the layers were additionally determined by ellipsometric and profilometric measurements.
Źródło:
Acta Physica Polonica A; 2002, 102, 2; 221-225
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pomiar długozasięgowego odchylenia od płaskości powierzchni płytek Si za pomocą HR XRR
Measurement of long range surface flatness deviation of Si wafers by means of HR XRR method
Autorzy:
Mazur, K.
Sass, J.
Surma, B.
Piątkowski, B.
Wnuk, A.
Gładki, A.
Turos, A.
Powiązania:
https://bibliotekanauki.pl/articles/192401.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Materiałów Elektronicznych
Tematy:
płytka Si
reflektrometria rentgenowska
Si wafers
X-Ray reflectrometry
Opis:
Opracowano metodę oszacowania stopnia długozasięgowego odchylenia od płaskości powierzchni za pomocą rentgenowskiej metody reflektometrycznej XRR w układzie niezwierciadlanym (non - specular). Otrzymane wyniki dla ośmiu płytek krzemowych o zróżnicowanej grubości porównano z wynikami uzyskanymi za pomocą innych metod: (1) optycznej (w przypadku próbek grubości < 200 μm), (2) z wykorzystaniem stykowego miernika grubości (TSK) (dla próbek o grubości > 200 μm). Pomimo różnych założeń dla porównywanych metod uzyskano wystarczająco dobrą zgodność wyników co świadczy o użyteczności opracowanej metody.
The adaptation of the non-specular X-ray reflectivity method to control the long range random deviation of the surface flatness were done. The results obtained for eight Si samples were compared with the ones obtained (1) by optical method (for the samples < 200 μm in thickness), (2) by contact thickness gage (TSK) measurements, (for samples > 200 m in thickness). Despite of the rather rough assumptions made for compared methods, a sufficiently good conformity has been obtained. This is important conclusion confirms the usefulness of the proposed X-ray method
Źródło:
Materiały Elektroniczne; 2008, T. 36, nr 3, 3; 5-22
0209-0058
Pojawia się w:
Materiały Elektroniczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Azotek krzemu stosowany w technologii planarnych fotodiod wykonanych na bazie InP
Silicon nitride for InP based planar photodiode applications
Autorzy:
Zynek, J.
Hejduk, K.
Klima, K.
Możdżonek, M.
Stonert, A.
Turos, A.
Rzodkiewicz, W.
Powiązania:
https://bibliotekanauki.pl/articles/192312.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Materiałów Elektronicznych
Tematy:
azotek krzemu
PECVD
fotodioda planarna
InP
silicon nitride
planar photodiode
Opis:
Przeprowadzono badania warstw azotku krzemu osadzonych na płytkach z fosforku indu metodą PECVD (Plasma Enhanced Chemical Yapor Deposition) z wykorzystaniem do wytwarzania plazmy dwóch generatorów pracujących na różnych częstotliwościach. Celem badań było ustalenie warunków wytwarzania warstw azotku krzemu stosowanych w technologii planarnych fotodiod wykonanych na bazie InP, w których obszarem absorpcyjnym są studnie kwantowe z InxGa1-xAs. Warstwy azotku krzemu były osadzane w temperaturach pomiędzy 250°C i 300°C. Podstawą do oceny wytworzonych warstw były wyniki badań: ich składu chemicznego, struktury, współczynnika załamania, poziomu naprężeń, rezystywności, wytrzymałości dielektrycznej, stałej dielektrycznej i efektywnej gęstości powierzchniowej ładunków elektrycznych. Stwierdzono, że warstwy osadzane w temperaturze 250°C mają najlepszą strukturę, dobrze spełniają rolę maski w procesie selektywnej dyfuzji cynku, a właściwości elektryczne umożliwiają wykorzystanie ich do pasywacji powierzchni bocznych złącz p-n, pod warunkiem zastosowania odpowiedniego cyklu wygrzewań po procesie osadzania.
Silicon nitride films, deposited on InP wafers by the PECVD (Plasma Enhanced Chemical Vapor Deposition) method, have been investigated in terms of their applicability in the technology of InP based planar photodiodes with the InxGa1-xAs quantum well absorption region. In order to compensate the mechanical stress in the films, the plasma was excited by two radio-frequency sources operating at frequencies of 13,56 MHz and 100 kHz. The films were deposited at different temperatures in the range of 250 - 300°C. The chemical composition of all examined films, determined by the RBS (Rutherford Backscattering Spectrometry) method, is very close to that of stoichiometric Si3N4. The films contain a large amount of hydrogen. The hydrogen content, evaluated by the NRA (Nuclear Reactions Analysis) technique, exceeds 30 %. The silicon nitride films deposited at 300°C have grown much faster on InP wafers than on Si wafers placed beside these and the structure of both films is different. As the films deposited on Si are amorphous with smooth surfaces, the films deposited on InP are heterogeneous with rough surfaces. These last ones exhibit lower Si-N bond concentration, lower refractive index, higher extinction coefficient, lower resistivity and lower dielectric breakdown strength than the films deposited on silicon. Deterioration of the film quality is caused probably by the reaction of phosphorus, released from the InP substrate at the beginning of the deposition process, with deposited SiNx:H. Such films should not be used in the fabrication of InP based planar photodiodes. When the deposition temperature decreases, the properties of silicon nitride films improve. Their structure becomes more homogeneous and the Si-N bond concentration increases. The silicon nitride films deposited on InP at 250°C have the same amorphous structure and the same Si-N bond concentration, determined from FTIR (Fourier Transform Infrared Spectroscopy) absorption characteristics, as the films deposited on silicon. They exhibit the highest refractive index, the lowest extinction coefficient, the highest resistivity and the highest dielectric breakdown strength. These films are continuous, they do not crack during thermal processes and they can be applied as masking layers for the selective Zn diffusion used to form the p-n junctions. Unfortunately the films deposited at 250°C have the highest hydrogen content and the highest effective charge density. These films cannot be applied directly to passivate the p-n junction side surfaces. Measurements of hydrogen depth profiles and of FTIR absorption characteristics have revealed that the amount of hydrogen and of Si-N, Si-H and N-H bonds changed during annealing. An analysis of C-V characteristics of Al/Si3N4:H/InP MIS capacitors containing these films has shown, that annealing of the Si3N4:H films reduced the electronic defect state density at the Si3N4:H/InP interface. It is possible to take advantage of the thermal instability of silicon nitrides deposited by the PECVD method and to reduce the trap state density and the effective charge density by proper annealing processes. These investigations have enabled us to achieve reverse current values as low as 4 - 15 pA at the voltage of - 5 V and 200 - 500 pA at the voltage of -50 V for planar InP diodes with the 320 um diameter p-n junction. A high yield of 90 % is obtained. These results make a good base for development of planar photodiodes with InxGa1-xAs quantum wells inserted into the depletion region of the InP p-n junction.
Źródło:
Materiały Elektroniczne; 2008, T. 36, nr 4, 4; 95-113
0209-0058
Pojawia się w:
Materiały Elektroniczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie odkształceń sieci krystalicznej w implantowanej warstwie epitaksjalnej GaN osadzonej metodą MOCVD na podłożu szafirowym o orientacji [001]
Lattice strain study in implanted GaN epitaxial layer deposited by means of MOCVD technique on [001] oriented sapphire substrate
Autorzy:
Wójcik, M.
Gaca, J.
Wierzbicka, E.
Turos, A.
Strupiński, W.
Caban, P.
Sathish, N.
Pągowska, K.
Powiązania:
https://bibliotekanauki.pl/articles/192129.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Materiałów Elektronicznych
Tematy:
HRXRD
implementacja jonowa
dyfrakcja
ion implantation
diffraction
Opis:
W pracy zbadano warstwy epitaksjalne GaN o grubości 1000 nm implantowane jonami Ar++ w zakresie dawek od 7 ⋅ 1013 cm-2 do 1 ⋅ 1015 cm-2. Wyznaczono zakres proporcjonalności pomiędzy dawką a średnią zmianą odległości pomiędzy płaszczyznami równoległymi do powierzchni swobodnej implantowanego kryształu GaN. Wyznaczono korelację pomiędzy wielkością dawki jonów a rozkładem odkształceń sieci krystalicznej występujących w kierunku [001] w warstwie epitaksjalnej. Stwierdzono, że odkształcane są płaszczyzny sieciowe równolegle do interfejsu, a komórka elementarna warstwy implantowanej ulega tetragonalizacji.
In the present work 1000 nm epitaxial GaN layer implanted with Ar++ ions in the dose range from 7 ⋅ 1013 cm-2 to 1 ⋅ 1015 cm-2 was investigated. The range of linearity between dose and the average change of interplanar spacing of planes parallel to the surface of the implanted GaN crystal was determined. It was found a correlation between the distribution of displaced atoms and lattice deformation occurring in the [001] direction in the epitaxial layer. It was also observed the tetragonalization of unit cell due to implantation.
Źródło:
Materiały Elektroniczne; 2011, T. 39, nr 4, 4; 22-31
0209-0058
Pojawia się w:
Materiały Elektroniczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Use of Analytical Methods in Evaluation of Coptic Wall Paintings Conservation - A Case Study
Autorzy:
Ali, M.
Abd El Aal, S.
Mahgoub, G.
Sihame, A.
Turos, A.
Korman, A.
Stonert, A.
Powiązania:
https://bibliotekanauki.pl/articles/1504111.pdf
Data publikacji:
2011-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.En
07.60.Pb
Opis:
Egypt has a lot of ancient monasteries and churches, which were decorated with different kinds of wall paintings. Structure of these wall paintings consists of support, plaster and painting layers. Paintings deterioration is primarily due to physicochemical, natural and human factors. The most detrimental factors are bat patches, old varnish and organic waste of birds. All these lead to the gradual disappearance of paintings. Modern technology of conservation is focused on application of new materials for cleaning of wall paintings. Here we report on the use of enzymes, for cleaning surface of coptic wall paintings. Analytical techniques such as particle induced X-ray emission, Fourier transform infrared and optical microscopy were used to evaluate the enzymatic cleaning processes of coptic wall paintings and to identify the chemical composition of red, yellow and white pigments. Particle induced X-ray emission results indicated that there is no change in the chemical composition of the materials and pigments due to enzymatic cleaning. Fourier transform infrared and optical microscopy results confirmed the stability of organic medium before and after treatment of different kind of patches.
Źródło:
Acta Physica Polonica A; 2011, 120, 1; 171-176
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies