Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

English (EN)·Polski (PL)·Yкраїнський (UK)
Przejdź do strony domowej biblioteki Centralna Biblioteka Wojskowa Link otwiera się w nowym oknie Logo biblioteki Prolib Integro - strona głównaCentralna Biblioteka Wojskowa

Wyszukujesz frazę "Lee, J. J." wg kryterium: Autor

  Lista filtrów
Wyrównaj
Wyświetlanie 1-25 z 136
Tytuł:
An analysis on the thermal characteristics according to the viscosity of bearing lubricant and the cooling condition for the high speed motor spindle
Autorzy:
Choi, D. B.
Lee, J. J.
Kim, S. T.
Kwon, H. D.
Kim, C. Y.
Powiązania:
https://bibliotekanauki.pl/articles/1429194.pdf
Data publikacji:
2008
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
high speed motor spindle
thermal displacement cooling condition
lubricant viscosity
Opis:
Thermal displacement of the high speed machine tools has a large influence on machining accuracy. The high speed motor spindle with many heat sources is widely used for the high speed machine tools recently. The important problem in this spindle is to reduce and minimize the thermal effects by motor and bearings. This paper presents the analysis on thermal characteristics for high speed motor spindle system with oil-air lubricated angular contact ceramic ball bearings and built-in motor. An analysis on the thermal characteristics of spindle is performed according to the cooling conditions and the viscosity of bearing lubricants by using finite element method. This results can be applied to the design and manufacturing for the high speed motor spindle.
Źródło:
Journal of Machine Engineering; 2008, 8, 4; 88-98
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
EPR Paradox Solved by Special Theory of Relativity
Autorzy:
Lee, J.
Powiązania:
https://bibliotekanauki.pl/articles/1198533.pdf
Data publikacji:
2014-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
03.65.Ud
Opis:
This paper uses the special theory of relativity to introduce a novel solution to Einstein-Podolsky-Rosen paradox. More specifically, the faster-than-light communication is described to explain two types of EPR paradox experiments: photon polarization and electron-positron pair spins. Most importantly, this paper explains why this faster-than-light communication does not violate the special theory of relativity.
Źródło:
Acta Physica Polonica A; 2014, 125, 5; 1107-1109
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tiling Spaces of Taylor-Socolar Tilings
Autorzy:
Lee, J.
Powiązania:
https://bibliotekanauki.pl/articles/1373221.pdf
Data publikacji:
2014-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
61.44.Br
61.44.-n
Opis:
The Taylor-Socolar tiling has been introduced as an aperiodic mono-tile tiling. We consider a tiling space which consists of all the tilings that are locally indistinguishable from a Taylor-Socolar tiling and study its structure. It turns out that there is a bijective map between the space of the Taylor-Socolar tilings and a compact Abelian group of a Q-adic space (Q̅) except at a dense set of points of measure 0 in Q̅. From this we can derive that the Taylor-Socolar tilings have quasicrystalline structures. We make a parity tiling from the Taylor-Socolar tiling identifying all the rotated versions of a tile in the Taylor-Socolar tiling by white tiles and all the reflected versions of the tile by gray tiles. It turns out that the Taylor-Socolar tiling is mutually locally derivable from this parity tiling.
Źródło:
Acta Physica Polonica A; 2014, 126, 2; 508-511
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hearing impairment among Korean farmers, based on a 3-year audiometry examination
Autorzy:
Lee, S.
Lee, K.
Lee, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/2082988.pdf
Data publikacji:
2019
Wydawca:
Instytut Medycyny Wsi
Tematy:
agriculture
sensorineural hearing loss
audiometry
Opis:
Introduction and objective. Work noise exposure among farmers can cause hearing loss. Farmers are exposed to hazardous noise from equipment and domestic animals, and experience high rates of noise-induced hearing loss. The aim of our study was to evaluate the hearing thresholds of farmers in Korea. This study is the first to evaluate hearing impairment in Korean farmers nationwide. There have been few studies that have performed audiometric testing to measure hearing impairment at the national level in Korea. Materials and method. Through the Farm Work Safety Model Project among the 40 villages in which inhabitants received health check-ups from 2006–2008, 2,027 people from 35 villages were targeted (957 people in 16 villages in 2006, 436 people in five villages in 2007, and 634 people in 14 villages in 2008) and underwent pure tone audiometry tests. 2,027 people from 35 villages underwent pure tone audiometry tests through the Farm Work Safety Model Project. The tests were conducted using a portable audiometer, and air conduction thresholds were determined. Results. Hearing impairment at 3kHz and above was more prevalent in men than in women. The prevalence of moderate- to-profound hearing impairment was 19.6% in the total study population and increased with age. Conclusions. It is proposed that the high prevalence rate of farmers’ hearing impairment may be due to excessive workplace noise. To manage farmers’ hearing health, precise evaluations of farmers’ hearing acuity and noise exposure on farms should be conducted. This study might be a stepping-stone to protect farmers’ hearing health.
Źródło:
Annals of Agricultural and Environmental Medicine; 2019, 26, 1; 148-153
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of applied frequency on microstructural and electrochemical characteristics of ceramic coating produced on Al-Mg alloy by pulsed plasma electrolytic oxidation
Autorzy:
Lee, J.
Lee, S.
Kim, S.
Powiązania:
https://bibliotekanauki.pl/articles/1155322.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.16.Pr
Opis:
Plasma electrolytic oxidation (PEO) coating is gaining attention as a promising surface treatment technique for lightweight metals and alloys such as Al, Mg and Ti. The coating involves complex interactions among various process parameters including substrate composition, current modes and electrolyte composition. In this study, ceramic coating was produced in silicate based alkaline solution on Al-Mg alloy by pulsed PEO with different applied frequencies (100, 500, 1000, 2000 Hz). The resultant coating was characterized using FE-SEM, EDS and HR-XRD. The electrochemical characteristics of the PEO coating were also investigated in seawater solution. It was found that changing frequency in the PEO process had a prominent effect on both surface and cross-sectional morphology of the coating. The electrochemical studies indicated that the pulsed PEO have improved the corrosion resistance of the Al-Mg substrate. In particular, the applied frequency of 100 Hz has produced one order of magnitude lower corrosion current density than that of the Al-Mg substrate.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 753-758
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rapid Synthesis of Gold Nano-Particles Using Pulse Waved Potential in a Non-Aqueous Electrolyte
Autorzy:
Jang, J. G.
Lee, J.-O.
Lee, C. K.
Powiązania:
https://bibliotekanauki.pl/articles/352529.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gold
nanoparticle
nonaqueous electrolyte
pulse wave
catalyst
Opis:
Rapid synthesis of gold nanoparticles (AuNPs) by pulsed electrodeposition was investigated in the non-aqueous electrolyte, 1-ethyl-3-methyl-imidazoliumbis(trifluoro- methanesulfonyl)imide ([EMIM]TFSI) with gold trichloride (AuCl3). To aid the dissolution of AuCl3, 1-ethyl-3-methyl-imidazolium chloride ([EMIM]Cl) was used as a supporting electrolyte in [EMIM]TFSI. Cyclicvoltammetry experiments revealed a cathodic reaction corresponding to the reduction of gold at −0.4 V vs. Pt-QRE. To confirmthe electrodeposition process, potentiostatic electrodeposition of gold in the non-aqueous electrolyte was conducted at −0.4 V for 1 h at room temperature. To synthesize AuNPs, pulsed electrodeposition was conducted with controlled duty factor, pulse duration, and overpotential. The composition, particle-size distribution, and morphology of the AuNPs were confirmed by field-emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), and transmission electron microscopy (TEM). The electrodeposited AuNPs were uniformly distributed on the platinum electrode surface without any impurities arising from the non-aqueous electrolyte. The size distribution of AuNPs could be also controlled by the electrodeposition conditions.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1389-1392
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Graphite Nanosheet Exfoliation From Graphite Flakes Through Functionalization Using Phthalic Acid
Złuszczanie nanoarkuszy grafitu z płatków grafitu przy użyciu kwasu ftalowego
Autorzy:
Kim, J. H.
Lee, J. H.
Powiązania:
https://bibliotekanauki.pl/articles/351457.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
exfoliation
graphite nanosheet
functionalization
grafting molecule
Friedel-Crafts acylation
złuszczanie
nanoarkusz grafitu
funkcjonalizacja
kwas ftalowy
acylowanie Friedela-Craftsa
Opis:
In order to fabricate graphite nanosheets from graphite flakes, edge-functionalized graphite nanosheets were prepared by a functionalization method using phthalic acid as the molecule to be grafted. A polyphosphoric acid/P2O5 solution containing graphite and phthalic acid were heated at different temperatures for 72 h in a nitrogen atmosphere. It was confirmed by transmission electron microscopy and atomic force microscopy that the resultant phthalic acid-functionalized graphite nanosheets had a large surface area of 20.69 μm2 in average and an average thickness of 1.39 nm. It was also found by X-ray diffractometry and Fourier transform infrared spectroscopy (FT-IR) analysis that the functionalization caused the formation of C=O bonds at the edges of the graphite nanosheets. The yield from this functionalization method was found to be dependent on the reaction temperature, only when it is between 70 and 130°C, because of the dehydration of phthalic acid at higher temperatures. This was confirmed by FT-IR analysis and the observation of low thermal energies at low temperatures.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1251-1255
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study on the Optimal Design of Air Pockets in an Air Bearing Applied Tilting Index Table
Autorzy:
Lee, M.-J
Lee, C.-M
Powiązania:
https://bibliotekanauki.pl/articles/971152.pdf
Data publikacji:
2009
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
optimal design
tilting index table
air bearing
air pocket
Opis:
The tilting index table has attached to CNC machining center with 3axes, it can be improvement of its performance and its machining efficiency. The tilting index table is a key unit in order to manufacture some non-rotational and 3-dimensional parts, using the conventional machining center. The tilting index table is directly connected to a processing object. Regarding the increase in the deflection of the table, it directly affects processing objects and increases errors and that makes impossible to obtain desired processing precision. Thus, this study performed the shape optimization of air pockets in order to minimize the deflection presented in the existing table. In the numerical optimizing method for implementing optimal design, the general full factorial design and response surface method in the design of experiments were used. A finite element analysis was used for computational experiments in which the finite element analysis was performed by using the ANSYS Workbench, which is a type of commercial FEM tool. In addition, the analysis of the results was performed by using the commercial program, Minitab 15. The results show that the optimum design results is better than those of the initial design.
Źródło:
Journal of Machine Engineering; 2009, 9, 2; 114-123
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural Transformation of Minimal Spanning Trees in World Commodity Market
Autorzy:
Lee, J.
Nobi, A.
Powiązania:
https://bibliotekanauki.pl/articles/1029531.pdf
Data publikacji:
2018-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
89.20.-a
89.65.Gh
89.75.-k
Opis:
We consider structural change of a world trade-flow network for different commodities from 1995 to 2013. A minimum spanning tree is generated from the trade flow data, and we investigate the hierarchical organization of the tree by changing the hub node. Only a few countries are the hub nodes for many of the commodities. We observed the structural transitions, from a chain-like tree (many countries are hub nodes) to a bi-starlike tree (only two countries are hub nodes). In the bi-starlike tree, China and Germany are the only two hub nodes.
Źródło:
Acta Physica Polonica A; 2018, 133, 6; 1414-1416
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sensitizing Effects of Ti Alloying Contents on Damage Behavior of Austenitic Stainless Steel Exposed to Ultrasonic Vibratory Cavitation
Autorzy:
Lee, J.
Kim, S.
Powiązania:
https://bibliotekanauki.pl/articles/1186947.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
47.55.dp
Opis:
The cavitation damage characteristics of austenitic stainless steel with different concentrations of Ti were investigated. The microstructure of the alloys was observed with optical microscope to identify its correlation with cavitation resistance. Hardness of the alloys was measured to examine its contribution to cavitation damage. It was found that the microstructure played a more significant role in cavitation damage behavior of austenitic stainless steel with Ti than the hardness. The findings in this study revealed that Ti addition in austenitic stainless steel may present either a beneficial or detrimental effect on cavitation damage behavior, depending on the microstructural characteristics. In particular, Ti content of 1.0% represented the most deteriorated cavitation characteristics due to the formation of relatively coarse precipitates. Therefore, control of Ti concentration is essential for marine application of austenitic stainless steel.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 578-583
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
$SiO_x$ Nanowires Produced on Molybdenum-Coated Si Substrates
Autorzy:
Kim, H.
Lee, J.
Yang, J.
Powiązania:
https://bibliotekanauki.pl/articles/1813396.pdf
Data publikacji:
2008-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.07.-b
78.55.-m
Opis:
We synthesized $SiO_x$ nanowires with diameters of 30-140 nm, for the first time by the simple heating of the Mo-coated Si substrates. X-ray diffraction, selected area electron diffraction, and energy-dispersive X-ray spectroscopy indicated that the nanowires were in an amorphous state, comprising Si and O only. Fitting the photoluminescence spectrum with Gaussian functions revealed that the nanowires exhibited significant photoluminescence intensities near blue and green light regions. We extensively discussed the possible growth mechanism of $SiO_x$ nanowires.
Źródło:
Acta Physica Polonica A; 2008, 113, 3; 1017-1020
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Fatigue Fracture Study on TDCB Aluminum Foam Specimen of Type Mode III Bonded with Adhesive
Autorzy:
Lee, J. H.
Cho, J. U.
Powiązania:
https://bibliotekanauki.pl/articles/356731.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
aluminum foam
fatigue fracture
fatigue analysis
load
Mode III type
specimen thickness
Opis:
This paper studies the characteristics of junction structure of closed-cell type aluminum foam, which is generally used as a shock absorber. TDCB specimens were designed for mode III type with thickness as a variable and performed a fatigue experiment on them by thickness. As the result, the load value of all specimens peaks under 0 to 25 cycles and decreases as the cycles increase. As the specimen thickens by 10 mm, the maximum load value is 1.2 times. When the thickness increases by 20 mm, the maximum value increases by 1.5 times. This study result can be utilized by investigating the mechanical characteristics of TDCB specimens for mode III type under fatigue loading conditions systematically and efficiently.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1359-1362
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Transient Liquid Phase Behavior of Sn-Coated Cu Particles and Chip Bonding using Paste Containing the Particles
Autorzy:
Hwang, J. H.
Lee, J.-H.
Powiązania:
https://bibliotekanauki.pl/articles/353042.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Sn-coated Cu
immersion plating
chip bonding
intermetallic compounds (IMC)
transient liquid phase (TLP)
sintering
Opis:
Sn-coated Cu particles were prepared as a filler material for transient liquid phase (TLP) bonding. The thickness of Sn coating was controlled by controlling the number of plating cycles. The Sn-coated Cu particles best suited for TLP bonding were fabricated by Sn plating thrice, and the particles showed a pronounced endothermic peak at 232°C. The heating of the particles for just 10 s at 250°C destroyed the initial core-shell structure and encouraged the formation of Cu-Sn intermetallic compounds. Further, die bonding was also successfully performed at 250°C under a slight bonding pressure of around 0.1 MPa using a paste containing the particles. The bonding time of 30 s facilitated the bonding of Sn-coated Cu particles to the Au surface and also increased the probability of network formation between particles.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1143-1148
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Properties of Copper Doped Neodymium Nickelate Oxide as Cathode Material for Solid Oxide Fuel Cells
Autorzy:
Lee, K. J.
Choe, Y-J.
Hwang, H-J.
Powiązania:
https://bibliotekanauki.pl/articles/351292.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
solid oxide fuel cells
copper
electrical conductivity
excess oxygen
Opis:
Mixed ionic and electronic conducting K2NiF4-type oxide, Nd2Ni1-xCuxO4+δ (x=0~1) powders were synthesized by solid state reaction technique and solid oxide fuel cells consisting of a Nd2Ni1-xCuxO4+δ cathode, a Ni-YSZ anode and ScSZ as an electrolyte were fabricated. The effect of copper substitution for nickel on the electrical and electrochemical properties was examined. Small amount of copper doping (x=0.2) resulted in the increased electrical conductivity and decreased polarization resistance. It appears that this phenomenon was associated with the high mean valence of nickel and copper and the resulting excess oxygen (δ). It was found that power densities of the cell with the Nd2Ni1-xCuxO4+δ (x=0.1 and 0.2) cathode were higher than that of the cell with theNd2NiO4+δ cathode.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 2A; 625-628
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Valorization of Cobalt from Waste LIB Cathode through Cobalt Oxalate and Cobalt Oxide Synthesis by Leaching-Solvent Extract-Precipitation Stripping
Autorzy:
Swain, B.
Lee, J.-C.
Lee, C.-G.
Powiązania:
https://bibliotekanauki.pl/articles/352333.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
valorization of cobalt
cobalt oxide powder
rod-shaped cobalt oxalate
precipitation stripping
Opis:
An ecoefficient, economical and sustainable valorization process for the synthesis of Co3O4 from waste lithium-ion battery (LIB) by leaching-solvent extract-scrubbing-precipitation stripping route has been developed. Through an optimization, the waste LIB cathode was leached using 2000 mole/m3 of H2SO4 and 5 Vol. % of the H2O2 at a pulp density of 100 kg/m3 under leaching time 60 minutes and temperature 75°C. From the separated leach liquor, cobalt was purified by saponified Cyanex 272. From cobalt, loaded Cyanex 272 impurities were scrubbed and the CoC2O4·2H2O was recovered through precipitation stripping. Finally, the precipitate was calcined to synthesize Co3O4, which is a precursor for LIB cathode materials manufacturing. From TGA-DTA, followed by XRD analysis it was confirmed that at 200°C the CoC2O4·2H2O can be converted to anhydrous CoC2O4 and at 350°C the anhydrous can be converted to Co3O4 and at 1100°C the Co3O4 can be converted to CoO. Through reported route waste LIB can back to LIB manufacturing process through a versatile and flexible industrial approach.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 1037-1042
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cr Poisoning On Nd2Ni0.95Cu0.05O4+δ Cathode for Solid Oxide Fuel Cells
Autorzy:
Choe, Y-J.
Lee, K. J.
Hwang, H-J.
Powiązania:
https://bibliotekanauki.pl/articles/354728.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
chromium poisoning
Ruddlesden-Popper
layered perovskite
solid oxide fuel cells
Nd2NiO4
Opis:
In this study, Nd2Ni1-xCuxO4+δ (x=0, 0.05, 0.1, and 0.2) layered perovskite powders were synthesized by the glycine nitrate process (GNP) and the chromium poisoning effect on the electrochemical performance of the Nd2Ni0.95Cu0.05O4+δ and La0.6Sr0.4Co0.2Fe0.88O3-δ cathodes were investigated. In the case of the LSCF cathode, the strontium chromite phase formed after the exposure of the gaseous chromium species, while there was no additional phase in the Nd2Ni0.95Cu0.05O4+δ cathode. The area specific resistance (ASR) of the Nd2Ni0.95Cu0.05O4+δ cathode did not change significantly after the exposure of the gaseous chromium species at 800°C
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 2A; 629-634
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Compressive Deformation Behavior of Thick Micro-Alloyed HSLA Steel Plates at Elevated Temperatures
Autorzy:
Lee, J.-H.
Kim, D.-O.
Lee, K.
Powiązania:
https://bibliotekanauki.pl/articles/351774.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
alloys
rolling
strain rate
compression test
HSLA steel
Opis:
The hot deformation behavior of a heavy micro-alloyed high-strength low-alloy (HSLA) steel plate was studied by performing compression tests at elevated temperatures. The hot compression tests were carried out at temperatures from 923 K to 1,223 K with strain rates of 0.002 s-1 and 1.0 s-1. A long plateau region appeared for the 0.002 s-1 strain rate, and this was found to be an effect of the balancing between softening and hardening during deformation. For the 1.0 s-1 strain rate, the flow stress gradually increased after the yield point. The temperature and the strain rate-dependent parameters, such as the strain hardening coefficient (n), strength constant (K), and activation energy (Q), obtained from the flow stress curves were applied to the power law of plastic deformation. The constitutive model for flow stress can be expressed as σ = (39.8 ln (Z) – 716.6) · ε(−0.00955ln(Z) + 0.4930) for the 1.0 s-1 strain rate and σ = (19.9ln (Z) – 592.3) · ε(−0.00212ln(Z) + 0.1540) for the 0.002 s-1 strain rate.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1191-1196
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phase Transformation And Mechanical Properties Of Ti-12.1Mo-1Fe Alloy With Nano-Sized Precipitation
Przemiany fazowe i właściwości mechaniczne stopu Ti-12.1Mo-1Fe z nanometrycznymi wydzieleniami
Autorzy:
Lee, D.-G.
Seo, J.
Li, Ch.
Lee, Y.
Powiązania:
https://bibliotekanauki.pl/articles/352551.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
age hardening
Omega phase
Ti-Mo-Fe alloy
precipitation
hartowanie
faza omega
stop Ti-Mo-Fe
wydzielenia
Opis:
Microstructural characterization and aging hardening behaviors of a new designed Ti-12.1Mo-1Fe alloy during solution treatment and aging were investigated in the present study. It is well known that when β-Ti alloys are generally under solution treatment or aging, α phases and ω phases appear or disappear dependent on heat treatment temperature and holding time. It is very necessary to understand the phase transformation phenomenon and to control the microstructure because these phases can control the drastic changes of the mechanical and physical properties of these alloys. According to the calculated [Mo]eq value and the microstructural observation, the β-transus temperature was about 780°. After the solution treatment, this alloy was composed of the β-phase and the microstructure mainly consisted of the equiaxed β grains with the average size of 25 μm. ω phases which were precipitated during aging process, played a more important role to the hardening effect than α phases. The highest hardness value of Ti-12.1Mo-1Fe alloy showed in the condition of the aging temperature of 450°. The hardening due to ω-phase precipitation can lead to a high hardness about 480 Hv but the coarse α-phase result in hardness below 300 Hv.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1393-1396
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Pre-Sintering on the Diffusion Treatment of HRE for Coercivity Enhancement of a NdFeB Sintered Magnet
Autorzy:
Lee, M. W.
Lee, J. K.
Jang, T. S.
Powiązania:
https://bibliotekanauki.pl/articles/355250.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
grain boundary diffusion process
GBDP
NdFeB magnet
coercivity
pre-sintering
Opis:
We investigated the effect of pre-sintering process on the penetration behavior of Dy in a NdFeB sintered magnet which was grain boundary diffusion treated with Cu/Al mixed Dy source. The pre-sintering of a magnet was performed at 900°C in vacuum and then the pre-sintered body was dipped in the solutions of DyH2, DyH2 + Cu, and DyH2 + Al, respectively. The dipped pre-sintered body were then fully sintered 4 hours at 1060°C followed by a subsequent annealing. The pre-sintering apparently improved the diffusivity of Dy atoms. The penetration of Dy into the magnet extended almost to 2,000 μm from the surface, about four times deeper than that of the normally sintered and diffusion treated one, when the DyH2 + Al solution was used as a Dy source. However, the resulting increase of coercivity was about 4 kOe, somewhat lower than that of the normally treated one, mostly due to excessive oxide formation that hindered to make a continuous Nd-rich grain boundary phase and a core-shell type structure.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 2; 597-601
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Ni Content on the Austenite Stability and Mechanical Properties of Nanocrystalline Fe-Ni Alloy Fabricated by Spark Plasma Sintering
Autorzy:
Park, D.
Oh, S.-J.
Shon, I.-J.
Lee, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/352972.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Fe-Ni alloy
austenite stability
mechanical properties
spark plasma sintering
Opis:
The mechanical behavior and the change of retained austenite of nanocrystalline Fe-Ni alloy have been investigated by considering the effect of various Ni addition amount. The nanocrystalline Fe-Ni alloy samples were rapidly fabricated by spark plasma sintering (SPS). The SPS is a well-known effective sintering process with an extremely short densification time not only to reach a theoretical density value but also to prevent a grain growth, which could result in a nanocrystalline structures. The effect of Ni addition on the compressive stress-strain behavior was analyzed. The variation of the volume fraction of retained austenite due to deformation was quantitatively measured by means of x-ray diffraction and microscope analyses. The strain-induced martensite transformation was observed in Fe-Ni alloy. The different amount of Ni influenced the rate of the strain-induced martensite transformation kinetics and resulted in the change of the work hardening during the compressive deformation.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1477-1480
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Immobilization of rambutan (Nephelium lappaceum) peel as a sorbent for Basic Fuchsin removal
Autorzy:
Lee, H.-J.
Ong, S.-T.
Powiązania:
https://bibliotekanauki.pl/articles/207651.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fuchsin
Fourier transform infrared spectrophotometry
FTIR
Nephelium lappaceum
fuksyna
spektroskopia w podczerwieni z transformatą Fouriera
Opis:
The potential of rambutan (Nephelium lappaceum) peel as a low-cost adsorbent in an immobilized condition to remove Basic Fuchsin from aqueous solution was studied. The effect of initial dye concentration, contact time, pH and adsorbent dosage for the dye removal was studied at room temperature (26±2 °C). Infrared spectrum of rambutan peel indicates the presence of C–O, –OH and C=C functional groups. The adsorption rate was found to be high at the first 30 min and the process reached equilibrium after 3 h with more than 80% of dye being removed. The uptake of Basic Fuchsin was more promising at pH slightly above 7. The study of sorption model and kinetic model showed that the adsorption of Basic Fuchsin on rambutan peel conformed to the Freundlich isotherm and pseudo-second order kinetics with a high correlation coefficient, R,sup>2 > 0.98. This indicates the Basic Fuchsin adsorbs chemically on the heterogeneous surface of rambutan peel. The maximum adsorption capacity determined from the Langmuir isotherm was 108.696 mg/g. It seems that rambutan peel has the potential to substitute activated carbon as an alternative low-cost adsorbent in the treatment of the dye effluent.
Źródło:
Environment Protection Engineering; 2017, 43, 1; 169-181
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure Evolution of Tungsten-Based ODS Alloys Reinforced with the γ(Ni, Fe) Phase by a Secondary Ball Milling Method
Autorzy:
Chen, C.
Zeng, Y.
Lee, J.
Powiązania:
https://bibliotekanauki.pl/articles/1375180.pdf
Data publikacji:
2014-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.20.Ev
81.20.Wk
81.07.Bc
81.05.Ni
Opis:
In the current study, $W-5Ni-2Fe-Y_2O_3$ model alloys were produced using a high-energy planetary ball mill. The presence of the γ(Ni, Fe) phase is favored with respect to material properties in this alloy. Therefore, a secondary ball milling method was introduced to obtain a fine and uniformly distributed γ(Ni, Fe) phase. Phase development of mechanical alloyed powders was investigated by X-ray diffraction. The results show that the formation of the γ(Ni, Fe) phase was found after 18 h of a pre-milling procedure. A further secondary milling method produced a uniform microstructure with grain refinement. TEM results also show changes in the lattice parameters of the tungsten and γ(Ni, Fe) phase associated with the solid solubility limits in the alloy produced by secondary ball milling.
Źródło:
Acta Physica Polonica A; 2014, 126, 4; 907-911
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of Carbon Nanotube Based Reflection Type X-ray Source
Autorzy:
Choi, H.
Kim, J.
Lee, C.
Powiązania:
https://bibliotekanauki.pl/articles/1807922.pdf
Data publikacji:
2009-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.47.Lx
75.47.Gk
73.50.Fq
Opis:
X-ray imaging technology is a useful and leading medical diagnostic tool for health care professionals to diagnose disease in human body. Carbon nanotube based X-ray source, which we have developed in this study, could be also useful and supply integrated diagnostic X-ray imaging tool in diagnosis. Conventionally, thermionic type of tungsten filament X-ray tube is widely employed in the field of biomedical and industrial application fields. However, intrinsic problems, such as poor emission efficiency, low imaging resolution, and high electrical energy consumption etc., may cause the limitation of using the X-ray tube. To fulfill the current market requirement, specifically for medical diagnostic field, we have developed rather a portable and compact carbon nanotube based X-ray device in which microfocus high imaging resolution can be feasible.
Źródło:
Acta Physica Polonica A; 2009, 115, 6; 1078-1080
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation of Submicroscale Ag-Coated Cu Particles by Multi-Step Addition of Ag Plating Solution and Antioxidation Properties for Different Ag Shell Thicknesses
Autorzy:
Choi, E. B.
Lee, J.-H.
Powiązania:
https://bibliotekanauki.pl/articles/351202.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ag-coated Cu particle
submicrometer
Glycol-based Ag plating solution
mult-step addition
antioxidation
Opis:
For application as a low-cost conductive filler material, submicroscale Cu@Ag particles were fabricated at room temperature without any reductants by a multi-step addition method using an ethylene glycol-based Ag plating solution. Scanning electron microscopy images of the Ag-coated Cu particles demonstrated the formation of discrete Ag particles less than 100 nm in size as well as a thin Ag coating on Cu particles, during the early addition steps. However, as the thickness of the Ag coating increased, the small Ag particles agglomerated into Ag coatings with an increase in the number of Ag plating steps. Owing to the absence of additives such as surfactants, a comparison between the microstructural images and calculations indicated increased agglomeration between fabricated Ag-coated Cu particles with an increase in the number of Ag plating steps. However, thermogravimetric-differential scanning calorimetry of the agglomerated Ag-coated Cu particles after the fifth addition of the Ag plating solution demonstrated their antioxidation behavior even after 70 min in air at 150°C.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1137-1142
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Wyświetlanie 1-25 z 136

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies