Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Zhang, Z." wg kryterium: Wszystkie pola


Tytuł:
Optimal maintenance of a series production system with two multi-component subsystems and an intermediate buffer
Optymalna strategia utrzymania ruchu dla seryjnego systemu produkcji złożonego z dwóch podsystemów wieloskładnikowych oraz buforu pośredniego
Autorzy:
Zhou, Y.
Zhang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/301663.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
series-parallel systems
intermediate buffers
Markov decision process
policy iteration
generalized minimum residual method
układ szeregowo-równoległy
bufor pośredni
proces decyzyjny Markowa
iteracja strategii
uogólniona metoda najmniejszego residuum
Opis:
Intermediate buffers often exist in practical production systems to reduce the influence of the breakdown and maintenance ef subsystems on system production. At the same time, the effects of intermediate buffers also make the degradation process of the system more difficult to model. Some existing papers investigate the performance evaluation and maintenance optimisation of a production system with intermediate buffers under a predetermined maintenance strategy structure. However, only few papers pay attention to the property of the optimal maintenance strategy structure. This paper develops a method based on the Markov decision process to identify the optimal maintenance strategy for a series-parallel system with two multi-component subsystems and an intermediate buffer. The structure of the obtained optimal maintenance strategy is analysed, which shows that the optimal strategy structure cannot be modelled by a limited number of parameters. However, some useful properties of the strategy structure are obtained, which can simplify the maintenance optimisation. Another interesting finding is that a large buffer capacity cannot always bring about high average revenue even through the cost of holding an item in the buffer is much smaller than the production revenue per item.
W systemach produkcyjnych często stosuje się bufory pośrednie w celu zmniejszenia wpływu awarii i konserwacji podsystemów na system produkcji. Jednocześnie, oddziaływanie buforów pośrednich utrudnia modelowanie procesu degradacji systemu. Istnieją badania dotyczące oceny funkcjonowania i optymalizacji utrzymania systemów produkcyjnych wykorzystujących bufory pośrednie przy założeniu wcześniej określonej struktury strategii utrzymania ruchy. Jednak tylko nieliczne prace zwracają uwagę na własności optymalnej struktury strategii utrzymania ruchu. W przedstawionej pracy opracowano opartą na procesie decyzyjnym Markowa metodę określania optymalnej strategii utrzymania ruchu dla układu szeregowo-równoległego z dwoma podsystemami wieloskładnikowymi oraz buforem pośrednim. Przeanalizowano strukturę otrzymanej optymalnej strategii utrzymania i wykazano, że struktury takiej nie można zamodelować przy użyciu ograniczonej liczby parametrów. Jednak odkryto pewne przydatne właściwości struktury strategii, które mogą ułatwić optymalizację utrzymania ruchu. Innym interesującym odkryciem było to, że duża pojemność bufora nie zawsze daje wysoką średnią przychodów mimo iż koszty przechowywania obiektu w buforze są znacznie mniejsze niż przychody z produkcji w przeliczeniu na jeden obiekt.
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 2; 314-325
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Theoretical Studies of the Spin Hamiltonian Parameters and Local Structures for the Two Tetragonal $Cu^{2+}$ Centers in $Ca(OH)_2$
Autorzy:
Zhang, H.
Wu, S.
Zhang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/1493658.pdf
Data publikacji:
2011-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
76.30.Fc
Opis:
The spin Hamiltonian parameters (g factors $g_{∥ },$ $g_{⊥}$ and the hyperfine structure constants $A_{∥ },$ $A_{⊥}$) and the local structures for the two tetragonal $Cu^{2+}$ centers I and II in $Ca(OH)_2$ are theoretically studied from the perturbation formulae of these parameters for a $3d^9$ ion under tetragonally elongated octahedra. The $[Cu(OH)_6]^{4-}$ clusters on the substitutional $Ca^{2+}$ site are found to suffer the relative elongations by about 0.083 Å and 0.065 Å for centers I and II, respectively, along the $C_4$ axis due to the Jahn-Teller effect. The above tetragonal elongations may entirely depress the original trigonal distortion of the host $Ca^{2+}$ site in $Ca(OH)_2$. The calculated spin Hamiltonian parameters based on the above Jahn-Teller elongations show good agreement with the experimental results. The EPR spectra and the local structures for the two centers are compared with one another.
Źródło:
Acta Physica Polonica A; 2011, 120, 3; 507-511
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface probability model for estimation of size distribution on a conveyor belt
Autorzy:
Zhang, Z
Yang, J.
Dou, D.
Powiązania:
https://bibliotekanauki.pl/articles/109982.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
size distribution
surface probability model
conveyor belt
particles
Opis:
Estimation of size distribution by image analysis is a key issue in mineral engineering. However, only the surface information of ore piles can be captured, which is a headache problem in this field while only a few researchers pay attention to this problem. A new surface probability model was proposed for estimation of size distribution on a conveyor belt based on the Chavez Model in this investigation. This model was tested and verified to have smaller errors in single size fraction but have bigger errors in multiple size fractions. Several error trends were found and a correction factor was introduced to correct the higher errors. A series of linear equations were developed to calculate this specific correction factor according to Dm (average particle size) and the height of pile. Therefore, empirical probability can be estimated by the specific correction factor and calculated probability, and the surface information of ore piles can be converted into the global information of piles.
Źródło:
Physicochemical Problems of Mineral Processing; 2014, 50, 2; 591-606
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Performance analysis of variable speed multiphase induction motor with pole phase modulation
Autorzy:
Liu, H.
Wang, J.
Zhang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/140991.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
induction motor (IM)
pole phase modulation (PPM)
efficiency
FEM
Opis:
The pole phase modulation (PPM) technique is an effective method to extend speed range and torque capabilities for an integrated starter and hybrid electric vehicles applications. In this paper, the five pole-phase combination types of a multiphase induction motor (IM) with 36 stator slots and 36 stator conductors are presented and compared quantitatively by using the time-stepping finite element method (TS-FEM). The 36 stator conductors of the proposed multiphase IM are fed by a 36 leg inverter and the current phase angle and amplitude of each stator conductor can be controlled independently. This paper focuses on the winding connection, the PPM technique and the performance comparative analysis of each pole-phase combination types of the proposed multiphase IM. The flux distribution, air-gap flux density, output torque, core losses and efficiency of five pole-phase combination types have been investigated.
Źródło:
Archives of Electrical Engineering; 2016, 65, 3; 425-436
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Arbuscular mycorrhizal Glomus versiforme induced bioprotection of apple tree against scar skin disease
Bioochrona drzew jabłoni wywołana mikoryzą abuskularną Glomus versiforme przed bliznowatością
Autorzy:
Yang, S.
Zhang, Z.
Shi, S.
Powiązania:
https://bibliotekanauki.pl/articles/11542830.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Tematy:
arbuscular mycorrhizal fungi
Glomus versiforme
biological protection
apple tree
apple scar-skin disease
pathogen
protective mechanism
Opis:
Apple scar skin viroid (ASSVd) is a serious pathogen of apple fruits that results in severe loss in apple production. Up to nowadays, many ASSVd management options are applied to resist the disease, but the diserable resulits are not achieved. Therefore, this study was conducted in 2010–2012 at experimental field of Penglai City, Shandong Province, China (E 120°57’22’’, N 370°38’33’’) to investigate whether arbuscular mycorrhizal (AM) Glomus versiforme protects Red Fuji apple trees (Malus × domestica Borkh) against apple scar skin viroid. Red Fuji apple trees were inoculated with Glomus versiforme and then potential protection mechanism was explored and compared to noninoculated plants. The results showed that inoculation with Glomus versiforme significantly increased root length colonization rate and clearly decreased the percentage of disease severity of apple scar skin disease. Compared to non-inoculated plants, Glomus versiforme obviously enhanced total nitrogen and phosphorus concentrations in leaves. Root colonization by Glomus versiforme induced an increase in defense-related enzyme activities in fruits, such as the enhanced activities of catalase, ascorbate peroxidase, chitinase and glucanase. Significant differences in acid content of fruit and fruit yield were observed as apple roots were colonized by Glomus versiforme. It is therefore concluded that Glomus versiforme can be regarded as a biocontrol agent to protect apple trees against the infection with ASSVd.
Wiroid bliznowatości skórki jabłek (ASSVd) jest poważnym patogenem jabłek powodującym znaczne straty w ich produkcji. Obecnie stosuje się wiele opcji kontrolowania ASSVd w celu uzyskania odporności na chorobę, ale nie osiągnięto jeszcze pożądanych rezultatów. Niniejsze badanie przeprowadzono w latach 2010–2012 na polu doświadczalnym miasta Penglai, prowincja Shandong w Chinach (E 120°57’22”, N 370°38’33”) w celu zbadania, czy mikoryza abuskularna (AM) Glomus versiforme chroni jabłonie Red Fuji (Malus × domestica Borkh) przed wiroidem bliznowatości skórki jabłek. Jabłonie Red Fuji zaszczepiono Glomus versiforme a następnie badano mechanizm potencjalnej ochrony oraz porównano go z roślinami nieszczepionymi. Wykazano, że inokulacja Glomus versiforme istotnie zwiększyła szybkość kolonizacji korzeni oraz wyrażnie zmniejszyła procent ostrej choroby bliznowatości skórki jabłek. W porównaniu z roślinami nieszczepionymi, Glomus versiforme wyrażnie wzmagał stężenia całkowitego azotu i fosforu w liściach. Kolonizacja korzeni przez Glomus versiforme powodowała wzrost aktywności enzymatycznej związanej z mechanizmem obronnym, np. wzmożoną aktywność katalazy, peroksydazy askorbinianowej, chitynazy oraz glukanazy. Zaobserwowano istotne różnice w zawartości kwasów oraz plonie owoców w miarę kolonizowania korzeni jabłoni przez Glomus versiforme. Można więc wyciągnąć wniosek, że Glomus versiforme może być uważany za czynnik bio-kontroli chroniący jabłonie przed zakażeniem ASSVd.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2014, 13, 5; 13-24
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A positioning lockholes of container corner castings method based on image recognition
Autorzy:
Shen, Y.
Mi, W.
Zhang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/259938.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
lockholes of container corner
HSV
lockholes positioning
hough transformation
Opis:
This article proposes a method of locating and recognizing lockholes in shipping container corner castings. This method converts the original image of the containers captured by a camera into the HSV (Hue, Saturation, Value) color space. To reduce the influence of the surface color of the containers and lights from the environment on the locating and recognizing algorithm, most noisy points of the image are filtered by binarization and a morphology opening operation to make the features of the containers clearer in the image. Thus, the container body can be separated from the total image. Then, the position and size of the corner castings are defined through calculation based on the international standard of the shipping container size. Lastly, by using this method, we can locate the corner casting in the image by using the General Hough Transform fitting algorithm onto ellipses.
Źródło:
Polish Maritime Research; 2017, S 3; 95-101
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research of Particle Transport with External Driving Force and Entropy Barrier
Autorzy:
Li, S.
Zhang, Z.
Chen, D.
Powiązania:
https://bibliotekanauki.pl/articles/1398914.pdf
Data publikacji:
2016-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
05.40.Jc
05.40.-a
05.10.Gg
05.60.Cd
Opis:
Transport of Brownian particle moving along a three-dimensional throat-like channel is investigated in the presence of an external constant force. The solution of the Fick-Jacobs equation in the situation is solved, and the probability current density and particle current describing the motion of particle are obtained. It is found that entropy barrier and external force can reverse the direction of particle current. The motion of Brownian particle can be tuned by the entropy barrier and the external force.
Źródło:
Acta Physica Polonica A; 2016, 129, 6; 1105-1108
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Seedling growth, root development and nutrient use efficiency of Cypress clones in response to calcium fertilizer
Autorzy:
Zhang, Z.
Jin, G.
Zhou, Z.
Powiązania:
https://bibliotekanauki.pl/articles/2078194.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
Cupressus funebris
root development
nutrient accumulation efficiency
calcium response
fertile
soil
low fertility soil
Opis:
Cypress (Cupressus funebris Endl.) is an important tree species in the subtropical regions of China; it is also a major tree species for afforestation and forest land restoration under low-fertility soil conditions. Cypress is considered a calcicolous tree, and its growth and development can be promoted significantly by exchangeable calcium (Ca2+) in the soil. However, most of the subtropical regions have low-fertility acidic soils, in which Ca2+ gradually becomes a limiting element for Cypress growth. In this study, different concentrations of Ca2+ fertilizer were added under fertile soil (3 g kg−1 NPK fertilizer added) and low-fertility soil (0 g kg−1 NPK fertilizer added) conditions. Cypress clones responded differently to Ca2+ addition in different soil conditions. The seedling height and dry matter quality of Cypress in fertile soil were significantly greater than those in low-fertility soil, but plant height and dry biomass did not differ significantly among Ca2+ treatments. The accumulation efficiencies of nitrogen (N), phosphorous (P) and Ca all differed significantly among the Ca2+ treatments. In low-fertility soil, the addition of 3 g kg-1 Ca2+ significantly promoted development of roots 0.5–2 mm in diameter, and both the C1 and C2 clones achieved their highest N, P and Ca accumulation efficiencies. When the Ca2+ concentration increased to 6 g kg−1, the seedling height, dry matter quality and root development were lower than those of the 3 g kg−1 Ca2+ treatment. In the fertile soil, the addition of Ca2+ significantly inhibited development of roots 0.5–1 mm in diameter. The highest N accumulation efficiency was achieved under the 0 g kg−1 Ca2+ treatment, and the highest Ca accumulation efficiency was achieved under the 6 g kg−1 Ca2+ treatment. Seedling height, root dry weight, roots 0–1.5 mm in diameter and Ca accumulation showed a significant interaction effect between NPK fertilizer and Ca2+. Therefore, Ca accumulation was more efficient in low-fertility soils. Under low-fertility soil conditions, the addition of CaSO4 can promote the root development of seedlings and advance and prolong the fast growth period of seedling height. Cypress clones can be used as an important tree species for afforestation under low-fertility soil conditions, especially under calcareous soil conditions.
Źródło:
Dendrobiology; 2020, 84
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reliability modeling and maintenance optimization of the diesel system in locomotives
Modelowanie niezawodności i optymalizacja utrzymania ruchu układu samoczynnego zapłonu w lokomotywach
Autorzy:
Zhang, Z.
Gao, W.
Zhou, Y.
Powiązania:
https://bibliotekanauki.pl/articles/301930.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
lokomotywowy silnik Diesla
model konkurujących zagrożeń oparty na wielokrotnym rozkładzie Weibulla
optymalizacja utrzymania ruchu
metoda przybliżonego łączenia parametrów (ACPM)
diesel engine of locomotive
multiple Weibull competing risk model
maintenance optimization
approximately combined parameter method(ACPM)
Opis:
Engine system is a prone-fault part in diesel locomotive and its malfunctions always occur regularly in different seasons in practice. However, the current maintenance policy in China has not attached deserving importance to seasonal influence, which is considered as one of the main causes for over/under-maintenance. To assess the current maintenance, in this study a double-fold Weibull competing risk model for summer and winter is developed using the real failure data (2008-2011) of locomotives from Urumqi Railway Bureau. Meanwhile, a new approach, termed as Approximately Combined Parameter Method (ACPM), is proposed to combine the initially estimated parameters into different folds, which can avoid a subjective determination of the model's parameters fold. After that, the combined parameters are used as initial values for maximum likelihood estimate (MLE) to achieve an accurate model. Necessary optimizations are introduced based on the chosen models. Results show that the maintenance period differs a lot between winter and summer, and the optimized maintenance can increase the availability and decrease cost more than the existing Policy.
Układ silnikowy stanowi podatną na uszkodzenia część lokomotywy spalinowej, a w praktyce jego awarie występują zawsze regularnie w zależności od pory roku. Pomimo tego, obecna polityka obsługowa w Chinach nie przywiązuje wystarczającej wagi do wpływu pór roku, co uważa się za główną przyczynę nadmiernych lub niedostatecznych działań obsługowych. Aby ocenić bieżące działania obsługowe, w niniejszym artykule opracowano model zagrożeń konkurujących dla lata i zimy, oparty na połączeniu dwóch rozkładów Weibulla, wykorzystujący rzeczywiste dane o uszkodzeniach (2009-2011) lokomotyw używanych przez Agencję Kolejową Urumqui. Jednocześnie zaproponowano nowe podejście, o nazwie Approximately Combined Parameter Method (Metoda Przybliżonego Łączenia Parametrów, ACPM), które polega na łączeniu wstępnie obliczonych parametrów w różne wielokrotności, co pozwala na uniknięcie subiektywnego wyznaczania liczby parametrów modelu. W celu otrzymania dokładnego modelu, połączone parametry wykorzystuje się jako wstępne wartości w estymacji metodą największej wiarygodności. Konieczne optymalizacje wprowadza się na podstawie wybranych modeli. Wyniki pokazują, że letni okres obsługowy różni się zasadniczo od zimowego, a zoptymalizowana obsługa może zwiększyć gotowość systemu i zmniejszyć koszty utrzymania ruchu w większym stopniu niż dotychczasowa polityka obsługowa.
Źródło:
Eksploatacja i Niezawodność; 2012, 14, 4; 302-311
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of large particle sizes using a machine vision system
Autorzy:
Zhang, Z.
Yang, J.
Su, X.
Ding, L.
Powiązania:
https://bibliotekanauki.pl/articles/109404.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
machine vision
particle size distribution
equivalent ellipse
best-fit rectangle
representing analysis
Opis:
Many methods based on machine vision were used to estimate coarse particles size distribution in recent years, but comparison of accuracy parameters representing particle size has not been carried out and a related representing analysis has not been yet proposed. Nine parameters were investigated. The results indicated the minor axis of equivalent ellipse and breadth of the best-fit rectangle were the most suitable for representing particle size. The former accuracy ratio was 86.43% and the latter accuracy ratio was 85.39%, while the accuracy of other parameters was less than 70%. A related representing analysis was proposed to explain this phenomenon. This research is instructive and meaningful for the size distribution estimation by machine vision.
Źródło:
Physicochemical Problems of Mineral Processing; 2013, 49, 2; 397-405
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energy consumed by valves in conventional water systems and the application of a power-decentralization system
Autorzy:
Fu, Y.
Cai, Y.
Zhang, Z.
Wu, K.
Powiązania:
https://bibliotekanauki.pl/articles/1955328.pdf
Data publikacji:
2006
Wydawca:
Politechnika Gdańska
Tematy:
power-centralized system
power-decentralized system
valves' power consumption
valve
Opis:
The power consumption by valves of a conventional (i.e. power-centralized) water system is analyzed on the example of a water heating system in order to evaluate the extent of energy savings achievable in a power-decentralized system. The configuration and appli-cation of a power-decentralized system is briefly discussed.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2006, 10, 3; 311-320
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optymalizacja zależnego od stanu technicznego utrzymania urządzeń dla dwuskładnikowego systemu szeregowego nie wymagająca z góry ustalonej struktury strategii
Condition-based Maintenance Optimisation without a Predetermined Strategy Structure for a Two-component Series System
Autorzy:
Zhang, Z.
Zhou, Y.
Sun, Y.
Ma, L.
Powiązania:
https://bibliotekanauki.pl/articles/301595.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
semimarkowski proces decyzyjny
condition-based maintenance
system wieloskładnikowy
semi-Markov decision process
multi-component system
Opis:
Większość badań nad optymalizacją utrzymania systemów wieloskładnikowych bierze pod uwagę jedynie rozkład czasu życia elementów składowych. Kiedy przyjmie się dla systemów wieloskładnikowych strategię utrzymania urządzeń zależną od ich bieżącego stanu technicznego (condition-based maintenance, CBM), struktura strategii staje się złożona w związku z dużą liczbą stanów składowych oraz ich kombinacji. W konsekwencji, często przyjmuje się pewne z góry ustalone struktury strategii utrzymania przed optymalizacją utrzymania systemu wieloskładnikowego w kontekście CBM. Opracowanie takich z góry ustalonych struktur strategii wymaga jednak specjalistycznego doświadczenia, a i tak brak dowodów na optymalność tych strategii. W artykule zaproponowano metodę optymalizacji utrzymania szeregowego systemu dwuskładnikowego, która nie wymaga wcześniej ustalonej struktury strategii. Proponowaną metodę opracowano na podstawie semimarkowskiego procesu decyzyjnego (SMDP). Badanie symulacyjne pokazało, że za pomocą proponowanej metody można ustalać optymalną strategię utrzymania w sposób adaptacyjny dla różnych kosztów utrzymania oraz parametrów procesów degradacyjnych. Za pomocą symulacji badano także optymalną strukturę strategii utrzymania, jako punkt odniesienia dla przyszłych studiów nad optymalizacją systemów wieloskładnikowych.
Most existing research on maintenance optimisation for multi-component systems only considers the lifetime distribution of the components. When the condition-based maintenance (CBM) strategy is adopted for multi-component systems, the strategy structure becomes complex due to the large number of component states and their combinations. Consequently, some predetermined maintenance strategy structures are often assumed before the maintenance optimisation of a multicomponent system in a CBM context. Developing these predetermined strategy structure needs expert experience and the optimality of these strategies is often not proofed. This paper proposed a maintenance optimisation method that does not require any predetermined strategy structure for a two-component series system. The proposed method is developed based on the semi-Markov decision process (SMDP). A simulation study shows that the proposed method can identify the optimal maintenance strategy adaptively for different maintenance costs and parameters of degradation processes. The optimal maintenance strategy structure is also investigated in the simulation study, which provides reference for further research in maintenance optimisation of multi-component systems.
Źródło:
Eksploatacja i Niezawodność; 2012, 14, 2; 120-129
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A criticality importance-based spare ordering policy for multi-component degraded systems
Oparta na kryterium krytyczności polityka zamawiania części zamiennych do zdegradowanych systemów wieloelementowych
Autorzy:
Wang, C.
Xu, J.
Wang, H.
Zhang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/301866.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
multi-component
spare ordering
criticality importance
random lead time
reliability threshold
system wieloelementowy
zamawianie części zamiennych
krytyczność
losowy czas realizacji procesu produkcyjnego
próg niezawodności
Opis:
With the increasing complexity and variety of production systems, more attention is being paid to preventive replacement on multicomponent systems. Each component is non-identical and has its own degradation process. In this paper, we propose a criticality importance-based spare ordering policy for a complex system, which consists of multiple series-parallel degrading components. Replacement action is triggered whenever the system reliability drops below a lower threshold and spares for replacement are available. Our policy mainly consists of two steps: (1) determine which components to be replaced; (2) determine when to order spares for components selected. In step 1, when the replacement action is triggered, we select components that most need to be replaced within the system in accordance with the optimum ranking of components until the system meets an upper reliability threshold. In step 2, a spare ordering policy for components selected is made and the optimal spare ordering time is obtained by minimizing the expected replacement cost during the once replacement cycle. Finally, a numerical example is given to illustrate the proposed multi-spare ordering policy. Moreover, the proposed policy is of significance for safety-critical systems such as substation automation system, bridge system, nuclear power plants and aerospace equipment.
Wraz ze wzrostem złożoności i różnorodności systemów produkcyjnych, coraz większą uwagę zwraca się na wymianę zapobiegawczą w systemach wieloelementowych. Każdy element takiego systemu jest nieidentyczny z pozostałymi elementami i charakteryzuje się własnym procesem degradacji. W niniejszym artykule proponujemy strategię zamawiania elementów zamiennych dla systemu złożonego składającego się z wielu ulegających degradacji komponentów tworzących strukturę szeregowo-równoległą. Omawiana strategia wymiany opiera się na kryterium krytyczności elementów. Akcja wymiany uruchamiana jest za każdym razem, gdy niezawodność systemu spada poniżej dolnego progu i dostępne są części zamienne. Na proponowaną strategię składają się zasadniczo dwa etapy: (1) określenie elementów wymagających wymiany oraz (2) określenie terminu zamówienia części zamiennych do wybranych elementów. W 1. etapie, po uruchomieniu akcji wymiany, wybiera się komponenty systemu, które najpilniej wymagają wymiany, kierując się optymalnym rankingiem komponentów, do momentu aż system osiągnie górny próg niezawodności. W 2 etapie, opracowuje się politykę zamawiania części zamiennych dla wybranych komponentów oraz określa się optymalny czas zamawiania części zamiennych poprzez minimalizację oczekiwanego kosztu wymiany podczas jednego cyklu wymiany. W artykule przedstawiono przykład numeryczny, który ilustruje proponowaną strategię jednoczesnego zamawiania wielu części zamiennych. Proponowana strategia może znaleźć zastosowanie w systemach o kluczowym znaczeniu dla bezpieczeństwa, takich jak systemy automatyki podstacji, systemy mostowe, elektrownie jądrowe i sprzęt lotniczy.
Źródło:
Eksploatacja i Niezawodność; 2018, 20, 4; 662-670
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fuzzy Availability Assessment for Discrete Time Multi-State System under Minor Failures and Repairs by Using Fuzzy Lz -transform
Wykorzystanie rozmytej transformaty do oceny rozmytej gotowości eksploatacyjnej dyskretnego w czasie systemu wielostanowego działającego w trybie drobnych uszkodzeń i napraw
Autorzy:
Hu, L.
Zhang, Z.
SU, P.
Peng, R.
Powiązania:
https://bibliotekanauki.pl/articles/301353.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
czas dyskretny
model Markowa
rozmyta transformata
system wielostanowy
dostępność
discrete time
Markov model
fuzzy Lz-transform
Multi-State System
availability
Opis:
W niniejszej pracy badano metodę oceny dynamicznej, rozmytej gotowości eksploatacyjnej (dostępności) dyskretnego w czasie systemu wielostanowego pracującego w trybie drobnych uszkodzeń i napraw. Tradycyjnie zwykło się zakładać, że analiza niezawodności dostarcza dokładnych danych niezawodnościowych na temat danego dyskretnego w czasie komponentu/systemu. W praktyce inżynieryjnej jednak trudno jest uzyskać dokładne dane do oceny właściwości komponentu/systemu. W niniejszej pracy zaproponowano jak problem ten można rozwiązać wykorzystując do oceny dynamicznej gotowości dyskretnego w czasie systemu wielostanowego, teorię zbiorów rozmytych. Rozmyty model Markowa z dyskretnym czasem i rozmytą macierzą prawdopodobieństw przejść zastosowano do analizy rozmytego prawdopodobieństwa stanu każdego elementu w dowolnym czasie dyskretnym. Opracowano rozmytą transformatę Lz rozmytego, dyskretnego w stanach i czasie łańcucha Markowa, która pozwala poszerzyć transformatę Lz modelu Markowa dyskretnego w stanach i ciągłego w czasie o zbiory ostre. W oparciu o metodę alfa przekrojów oraz rozmytą transformatę Lz, obliczono dynamiczną rozmytą gotowość eksploatacyjną systemu, wykorzystując do tego celu technikę programowania parametrycznego. Zastosowanie proponowanej metody zilustrowano na przykładzie liczbowym analizując układ przesyłu.
This paper studies assessment approach of dynamic fuzzy availability for a discrete time multi-state system under minor failures and repairs. Traditionally, it was assumed that the exact reliability data of a component/system with discrete time are given in reliability analysis. In practical engineering, it is difficult to obtain precise data to evaluate the characteristics of a component/system. To overcome the problem, fuzzy set theory is employed to deal with dynamic availability assessment for a discrete time multi-state system in this paper. A fuzzy discrete time Markov model with fuzzy transition probability matrix is proposed to analyze the fuzzy state probability of each component at any discrete time. The fuzzy Lz-transform of the discrete-state discrete-time fuzzy Markov chain is developed to extend the Lz-transform of the discrete-state continuous-time Markov model with crisp sets. Based on the α-cut approach and the fuzzy Lz-transform, the dynamic fuzzy availability of the system is computed by using parametric programming technique. To illustrate the proposed method, a flow transmission system is analyzed as a numerical example.
Źródło:
Eksploatacja i Niezawodność; 2017, 19, 2; 179-190
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical simulation of stress-relief effects of protective layer extraction
Symulacja numeryczna skutków odprężenia warstwy zabezpieczającej w trakcie jej wybierania
Autorzy:
Jia, T.
Zhang, Z.
Tang, C.
Zhang, Y.
Powiązania:
https://bibliotekanauki.pl/articles/219293.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
warstwa ochronna
odprężanie
symulacje numeryczne
strefa wycieku
protective layer
stress relief
numerical simulation
leakage zones
Opis:
Field test and laboratory analog model test on the stress-relief effects of protective layer extraction are time-consuming and laborious. In this paper, on the basis of full consideration of rock heterogeinity and in combination with gas geology at Pingdingshan Mine 5, a numerical model was estalished with the gas-solid coupling rock failure process analysis system RFPA-Gas to simulate the stress variation law, roof and floor deformation, fracture evolution law, displacement in the protected seam, change in gas permeability and gas migration law during protective layer extraction. The simulation results repoduced stress variations in coal and rock strata, roof and floor deformation and fracture evolution process during protective layer extraction. The movement of rock strata were characterized by upper three zones and lower two zones: caving zone, fracture zone and bending subsidence zone in the vertical direction in the overlying strata; floor deformation and failure zone and elasto-plastic deformation zone in the vertical direction in the underlying strata. It showed that stress relief occurred in the protected seam, which led to vertical and horizontal displacements, significant increase in gas permeability, gas desorption and migration. Hence, the outburst threat in the protected seam was eliminated. Meanwhile, with comprehensive analysis of variaition of stress state, deformation characteristics and fracture distribution in coal seam and with consideration of changes in gas leakage rate, gas pressure and permeability, according to gas leakage rate, the floor strata of the protecive layer were divided into four leakage zones. They corresponded to four zones with different stress states and fracture development: original leakage zone - slow reducing leakage zone - dramatic increasing leakage zone- steady increasing leakage zone. This classification provides a clear direction for gas control in the protective layer. The simulation results are in good agreement with the stress-relief effects in field.
Badania terenowe oraz modelowanie w warunkach laboratoryjnych skutków odprężenia warstwy zabezpieczającej w trakcie wydobycia są niezwykle czasochłonne i skomplikowane. Uwzględniając niejednorodność skał i wykorzystując dane geologiczne i o obecności gazów w kopalni Pindingshan 5, opracowano model numeryczny pękania skał w układzie gaz-ciało stałe w oparciu o analizę układu RFPA-Gaz. Model wykorzystano do symulacji zmian naprężeń, odkształceń stropu i spągu, propagacji pęknięć, przemieszczeń w pokładach zabezpieczonych, zmian w przepuszczalności gazów oraz migracji gazów w trakcie wybierania warstwy zabezpieczającej. Wyniki symulacji odwzorowują zmiany naprężeń, odkształceń stropu i spągu, propagacji pęknięć w trakcie wybierania warstwy ochronnej. Ruchy warstw górotworu scharakteryzowano poprzez analizę trzech stref nadkładu i dwóch stref lezących poniżej: w warstwach nadkładu: strefy zawału, strefy spękań oraz strefy osiadania (przemieszczenia w kierunku pionowym), w warstwach leżących poniżej: strefy odkształcenia i pękania spągu, oraz strefy odkształceń elastyczno- plastycznych w kierunku pionowym. Wykazano, że odprężanie miało miejsce w pokładzie zabezpieczającym, co prowadziło do powstania przemieszczeń pionowych oraz poziomych, zanotowano także znaczny wzrost przepuszczalności gazów, desorpcji gazów oraz ich transportu. Z tych względów zagrożenie wybuchem w pokładzie ochronnym zostało wyeliminowane. Całościowa analiza zmian stanu naprężenia, charakterystyki odkształceń i rozkładu pęknięć w pokładzie węgla przeprowadzona została dla czterech stref przecieku gazów, wydzielonych w oparciu zmiany natężenia wypływu gazów, ciśnienia gazów oraz przepuszczalności w odniesieniu do natężenia przepływu gazu w spągu w warstwie ochronnej. Te cztery strefy odpowiadały czterem strefom w których zanotowano odmienne stany naprężeń i rozkładu spękań: pierwotna strefa wycieku, powoli zmniejszająca się strefa wycieku, gramatycznie powiększająca się strefa wycieku i stopniowo powiększająca się strefa wycieku. Powyższa klasyfikacja dostarcza wyraźnych wytycznych dla prowadzenia kontroli wycieku gazu w warstwach ochronnych. Wyniki symulacji skutków odprężania wykazują dużą zgodność z wynikami badań terenowych.
Źródło:
Archives of Mining Sciences; 2013, 58, 2; 521-540
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Insecticide susceptibility of the green plant bug, Apolygus lucorum Meyer-Dur (Homoptera: Miridae) and two predatory arthropods
Autorzy:
Zhang, Z.
Zhang, X.
Liu, F.
Mu, W.
Powiązania:
https://bibliotekanauki.pl/articles/66506.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
insecticide
susceptibility
green plant bug zob.true bug
true bug
Apolygus lucorum
Homoptera
Miridae
arthropod
cotton
pest
Chrysopa sinica
Propylaea japonica
safety evaluation
toxicity
Opis:
The green plant bug (Apolygus lucorum Meyer-Dür) is a key pest of Bt cotton in China. Along with biological control, chemical control is one of the most important strategies in A. lucorum Integrated Pest Management (IPM). The goal of this study was to evaluate the toxicity of eight conventional insecticides to A. lucorum and to assess the susceptibility of two generalist predators Chrysopa sinica (Jieder) and Propylaea japonica (Thunbery) to insecticides that are commonly used in A. lucorum management. Via glass-vial and leaf-dip bioassay, toxicity tests with selected insecticides at two different life-stages of A. lucorum indicated significant differences between the LD50 or LC50 values for these compounds within different insecticidal classes. Phenylpyrazole fipronil had the highest toxicity to 4th-instar nymphs and adults of A. lucorum, whereas neonicotinoid imidacloprid had the lowest toxicity among the insecticides. Females were more tolerant to insecticides than were males, as shown by the higher LD50 values for females. Furthermore, laboratory tests showed that endosulfan had the highest selectivity to C. sinica and P. japonica: the selective toxicity ratios (STRs) were superior to other tested insecticides, particularly imidacloprid, and were 5.396 and 4.749-fold higher than baseline STRs, respectively. From this study, we conclude that fipronil can potentially be used to efficiently control A. lucorum. An alternative control agent worth consideration is endosulfan, owing to its relative safety to non-targeted natural enemies.
Źródło:
Journal of Plant Protection Research; 2015, 55, 4
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Invariants for Time-Dependent Harmonic Oscillators from the Real Representation of Solution
Autorzy:
Liang, M.-L.
Zhang, Z.-G.
Yuan, B.
Powiązania:
https://bibliotekanauki.pl/articles/2037140.pdf
Data publikacji:
2004-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
45.20.Jj
03.65.-w
Opis:
The invariants for the time-dependent one-dimensional harmonic oscillator and the time-dependent two-dimensional harmonic oscillator in a static magnetic field are derived from the real representation of the exact solution to the equation of motion. Mathematically, the orthogonal functions invariant is the angular momentum of an isotropic time-dependent two-dimensional harmonic oscillator. Based on the invariants obtained here, the wave function for time-dependent two-dimensional harmonic oscillator in a static magnetic field in cylindrical coordinate is simply derived and the dynamical and geometrical phases are easily got by expressing the wave function as the superpositions of the wave functions of time-dependent two-dimensional harmonic oscillator in rectangular coordinate. For the driven system, the driving induced dynamical phase and the geometrical phase are respectively associated with the classical Hamiltonian and de Broglie wave of the center motion of the wave function.
Źródło:
Acta Physica Polonica A; 2004, 105, 3; 253-262
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mass transfer process of leaching weathered crust elution-deposited rare earth ore with magnesium salts
Autorzy:
Chen, Z.
Zhang, Z.
He, Z.
Chi, R.
Powiązania:
https://bibliotekanauki.pl/articles/110343.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
mass transfer
magnesium salts
theory plate
weathered crust elution-deposited rare earth ore
Opis:
In order to optimize the leaching process of weathered crust elution-deposited rare earth ore with magnesium salts, the influence of different flow rate, concentration of magnesium ions, initial pH of magnesium salts solution and experimental temperature on the mass transfer process of rare earth and aluminum was investigated in the case of using magnesium salts as leaching agent. The relationship between the flow rate μ and the HETP (Height Equivalent of Theoretical Plate) is in accordance with the Van Deemter equation when magnesium salts were used as leaching agent. The optimum condition for rare earth and aluminum were 0.4 cm3/min of flow rate and 0.2 mol/dm3 of magnesium ion concentration of magnesium sulfate, magnesium chloride and magnesium nitrate respectively. Under this condition the mass transfer efficiency of rare earth and aluminum with three kinds of magnesium salts follow the order of Mg(NO3)2>Mg(Cl)2>MgSO4. High temperature contributes to improving the mass transfer efficiency of rare earth and aluminum. Magnesium nitrate as the leaching agent can get the highest leaching mass transfer efficiency of rare earth and magnesium sulfate as the leaching agent can make the impurity leaching and mass transfer efficiency of Al is the lowest.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 1004-1013
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Forest in Karst Mountain sinkhole of southeastern China provides refugium for the preservation of bryophyte diversity
Autorzy:
Li, X.
Zhang, Z.
Wang, Z.
Shi, K.
Powiązania:
https://bibliotekanauki.pl/articles/2130582.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
negative landform
natural refuge
complex microenvironment
karst rocky
desertification
Opis:
The negative landform of sinkholes provides belowground level refugia for a high diversity of forest species compared to the forests on the surface of surrounding karst plateaus in southeastern China. Bryophyte diversity in sinkhole forests is also likely to be high. In this study, bryophytes of an underground forest sinkhole (UFS), and two forests (Forest Karst Mountain 1; FKM1) and (Forest Karst Mountain 2; FKM2) on the surface of the karst plateau were compared to understand the role of the sinkhole forest in the conservation of bryophyte diversity and the relationships between bryophyte diversity, environmental factors, and soil nutrients. Significantly more bryophyte taxa were recorded from the sinkhole forest (71 taxa, 36 genera, 23 families) than those in the forest on the plateau surface, which was the closest to the sinkhole (FKM1; 29 bryophyte taxa, 16 genera, 12 families), and even fewer bryophytes were found in the forest more distant to the sinkhole (FKM2; 22 taxa, 17 genera, eight families). Twenty-four liverwort taxa were collected from the sinkhole forest, two from the closest surface forest (FKM1) and none from the furthest surface forest (FKM2). Ninety-three percent of the bryophytes in karst mountain sinkhole were not found on surface forest. The diversity index trend was as follows: UFS > FKM1 > FKM2, and the evenness index trend was in the opposite direction as follows: UFS < FKM1 < FKM2. The beta diversity showed that the Jaccard index among the three forests was 0–0.25, reflecting a huge difference between the sinkhole forest and the two surface forests. Canonical correspondence analysis showed that light was the most important factor affecting the distribution of bryophytes in the sinkhole forest, while temperature and humidity were key factors for the distribution of bryophytes in the two surface forests. Further, soil parameters, namely, soil organic carbon, total nitrogen, total phosphorus, total potassium, alkali- hydrolyzed nitrogen, and available phosphorus changed gradually from UFS to FKM1 and to FKM2. The sinkhole forest, located in a landform with the unique negative topography enclosed by cliffs, and with a complex microenvironment, provides a natural refuge for bryophyte species in areas where forests have been negatively impacted by karst rocky desertification.
Źródło:
Acta Societatis Botanicorum Poloniae; 2020, 89, 4
0001-6977
2083-9480
Pojawia się w:
Acta Societatis Botanicorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorption of congo red from aqueous solutions by porous soybean curd xerogels
Autorzy:
Zhang, Z.
Li, Y.
Du, Q.
Li, Q.
Powiązania:
https://bibliotekanauki.pl/articles/778311.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Soybean curd
Congo red
Adsorption
Kinetics
Thermodynamics
Opis:
Soybean curd is a very popular food containing high-quality protein, polyunsaturated fats, vitamins, minerals and other nutrients. This study aims to prepare porous soybean curd xerogels via a vacuum freeze drying method and uses them as adsorbents to remove congo red from aqueous solutions. The morphology and functional groups of the soybean curd xerogels were characterized using scanning electron microscopy and Fourier transform infrared spectroscopy, respectively. The adsorption properties of congo red onto the soybean curd xerogels were carried out through investigating the influencing experimental parameters such as the drying method, solution pH, adsorbent dose, contact time and temperature. The results showed that the adsorption isotherm data were fitted well to the Freundlich isotherm. Adsorption kinetics of congo red onto the soybean curd followed the pseudo-second-order kinetic model. The thermodynamic parameters, such as ΔG°, ΔH° and ΔS°, were also determined.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 3; 95-102
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of surface functional groups of nanosilica on the properties of polyamide 6/SiO2 nanocomposite
Autorzy:
Xu, Q.
Chen, F.
Li, X.
Zhang, Z.
Powiązania:
https://bibliotekanauki.pl/articles/779538.pdf
Data publikacji:
2013
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
nanosilica
polyamide 6
nanocomposite
in situ polymerization
Opis:
The present study investigated the effect of the surface functional groups of nanosilica on the interfacial, crystallization, and thermal stability of polyamide 6/SiO2 (PA6/SiO2) nanocomposite, in which nanosilica was modified in situ with both 3-triethoxysilylpropylamine and 3-methacryloxypropyltrimethoxy silane¬ (KH-550 and KH-570). The FTIR analysis results showed the chemical bonding action between the reacting amino groups of nanosilica and end carboxyl groups of polyamide 6 enhanced with increasing the ratio of KH-550 and KH-570. The XRD spectrum indicated that the crystal structure of PA6/SiO2 nanocomposites tended to form α crystal type that was beneficial to an improvement of mechanical properties, and which was in agreement with the results of mechanical strength measurements. It was also found that crystallization temperature and crystallization rate of PA6/SiO2 nanocomposites were lower than that of neat polyamide 6.
Źródło:
Polish Journal of Chemical Technology; 2013, 15, 3; 20-24
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigations on the Anisotropic g Factors of the $Ni^{3+}$ Site in $La_2Ni_{0.5}Li_{0.5}O_4$
Autorzy:
Kuang, M.
Wu, S.
Zhang, Z.
Song, B.
Powiązania:
https://bibliotekanauki.pl/articles/1400149.pdf
Data publikacji:
2013-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
76.30.Fc
71.70.Ch
75.10.Dg
Opis:
The anisotropic g factors $g_{∥}$ and $g_{⊥}$ of $La_2Ni_{0.5}Li_{0.5}O_4$ are theoretically investigated using the perturbation formulae of the g factors for a low spin $(S=1//2) 3d^7$ ion in tetragonally elongated octahedra. The studied $Ni^{3+} (3d^7)$ center arises from the original $Ni^{2+}$ capturing one hole by $Li^{+}$ doping. The positive anisotropy $\Delta g (= g_{⊥}-g_{∥})$ can be ascribed to the lowest $\text{}^2 A_{1g}$ state due to the obvious (about 0.14 Å) tetragonal elongation of the oxygen octahedron around the $Ni^{3+}$ site via the Jahn-Teller effect, and the effective magnetic moment is also interpreted in a uniform way. The calculated results show good agreement with the experimental data, and the imperfection of the previous studies based on various adjusted tetragonal energy splittings without correlating to the local structure of the magnetic center is thus overcome in this work.
Źródło:
Acta Physica Polonica A; 2013, 123, 4; 734-736
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of cutting angle on mechanical properties of rock cutting by conical pick based on finite element analysis
Autorzy:
Qiao, S.
Zhang, Z. Q.
Zhu, Z. M.
Zhang, K.
Powiązania:
https://bibliotekanauki.pl/articles/2016448.pdf
Data publikacji:
2021
Wydawca:
Politechnika Wrocławska. Wydział Geoinżynierii, Górnictwa i Geologii. Instytut Górnictwa
Tematy:
conical pick
energy consumption ratio
cutting angle
computer simulation
Opis:
In view of the current situation that it is difficult to obtain the actual cutting force received by the conical pick of Continuous-Miner and to deal with the characteristics of the cutting force. By using contact dynamics, rock mechanics, and finite element methods, based on the display dynamics analysis program ANSYS/LS-DYNA and the Holmquist–Johnson–Cook model, the contact mechanical characteristics between conical pick and rock are analyzed. The resultant force was obtained by obtaining the force curve of the conical pick under X, Y and Z directions, analysis of cutting gear cutting speed of 2.5 m/s, cutting depth of 5, 10, 15, 20 and 25 mm, cutting angle of 30°, 35°, 40°, 45°, 50° parameters of the size of cutting force and cutting ratio energy consumption, thus, the best cutting angle of the conical pick is obtained. The conclusions are as follows: when the cutting depth and cutting speed are constant, and the cutting angle is 45°, the mean cutting force received by the conical pick is the least, the specific energy consumption is the least, and the cutting efficiency is the highest. The best cutting angle of the conical pick should be 45°; When the cutting angle and cutting speed are constant, the energy needed by the cutter to cut the rock increases with the increase of cutting depth. The research results provide a theoretical basis for improving cutting efficiency and cutting life, and for choosing cutting angle and cutting thickness.
Źródło:
Mining Science; 2021, 28; 161-173
2300-9586
2353-5423
Pojawia się w:
Mining Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The lobopod Onychodictyon from the Lower Cambrian Chengjiang Lagerstatte revisited
Autorzy:
Liu, J
Shu, D.
Han, J.
Zhang, Z.
Zhang, X.
Powiązania:
https://bibliotekanauki.pl/articles/21235.pdf
Data publikacji:
2008
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
Yunnan
antenna
paleontology
Chengjiang Lagerstatte
Lobopodia
Arthropoda
lobopod
Cambrian
Lower Cambrian
Opis:
Onychodictyon ferox, from the Lower Cambrian Chengjiang Lagerstätte, is a worm−like armored lobopod with 10 pairs of dorsal plates and a pair of probable sensory appendages (“antennae”). Newly discovered complete specimens show that Onychodictyon is represented by two species: O. ferox with a “head” bearing a pair of dorsal “antennae” and a trunk with 11 pairs of limbs, whereas O. gracilis has a blunt anterior end without any appendages and a trunk with 12 pairs of limbs. Because of the close resemblance of the “antennae” of O. ferox and those of the lobopod Miraluolishania, they are considered to be homologous structures. The “antennae” of Cambrian lobopodians are proposed to be homologous with the arthropod antennulae.
Źródło:
Acta Palaeontologica Polonica; 2008, 53, 2
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A large xenusiid lobopod with complex appendages from the Lower Cambrian Chengjiang Lagerstatte
Autorzy:
Liu, J
Shu, D.
Han, J.
Zhang, Z.
Zhang, X.
Powiązania:
https://bibliotekanauki.pl/articles/21541.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
Chengjiang Lagerstatte
Lobopodia
China
arthropod
Jianshanopodia decora
large lobopod
lobopod
body length
Arthropoda
Xenusiidae
Cambrian
paleontology
Lower Cambrian
Opis:
A large lobopod, Jianshanopodia decora gen. et sp. nov., with body length (excluding appendages) about 220 mm from the Lower Cambrian Haikou section, near Kunming, Yunnan, southwest China, shows a mixture of characters, including features of the lobopod Xenusion Pompeckj, 1927, e.g., a large cylindrical body with annulations, stout and strong lobopod appendages each bearing bases of serial tubercles, and of Aysheaia Walcott, 1911, i.e., a pair of large frontal appendages. This suggests that the new genus might be a connecting link between Xenusion and Aysheaia. Besides, Jianshanopodia shares some features with the Early Cambrian stem group arthropod Pambdelurion Budd, 1997, and Kerygmachela Budd, 1993, e.g., the pairs of mid−gut diverticula, the possible presence of tail fan, the mouth cone, the frontal pharyngeal structures and the pharynax are surrounded by the bases of the large frontal appendages. However, compared with a series of segmentally arranged, imbricating, paddle−shaped, movable lateral flaps of both Pambdelurion and Kerygmachela, Jianshanopodia possesses distinct complex appendages with tree−like or lamellate branches. The discovery of this rare transitional form not only throws new light on the early diversification of lobopods, and may also have significance with respect to the origin of arthropods.
Źródło:
Acta Palaeontologica Polonica; 2006, 51, 2
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Two-stage classification approach for human detection in camera video in bulk ports
Autorzy:
Mi, C.
Zhang, Z.
He, X.
Huang, Y.
Mi, W.
Powiązania:
https://bibliotekanauki.pl/articles/259499.pdf
Data publikacji:
2015
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
Human Detection
Histograms of Oriented Gradients
Support Vector Machine
classification
Opis:
With the development of automation in ports, the video surveillance systems with automated human detection begun to be applied in open-air handling operation areas for safety and security. The accuracy of traditional human detection based on the video camera is not high enough to meet the requirements of operation surveillance. One of the key reasons is that Histograms of Oriented Gradients (HOG) features of the human body will show great different between front & back standing (F&B) and side standing (Side) human body. Therefore, the final training for classifier will only gain a few useful specific features which have contribution to classification and are insufficient to support effective classification, while using the HOG features directly extracted by the samples from different human postures. This paper proposes a two-stage classification method to improve the accuracy of human detection. In the first stage, during preprocessing classification, images is mainly divided into possible F&B human body and not F&B human body, and then they were put into the second-stage classification among side human and non-human recognition. The experimental results in Tianjin port show that the two-stage classifier can improve the classification accuracy of human detection obviously.
Źródło:
Polish Maritime Research; 2015, S 1; 163-170
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
3-D simulation of vertical-axial tidal current turbine
Autorzy:
Zhang, Z.
Ma, Y.
Jiang, J.
Liu, W.
Ma, Q.
Powiązania:
https://bibliotekanauki.pl/articles/260421.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
tidal current energy
vertical-axial turbine
hydrodynamic performance
CFD
numerical simulation
3-D effect
Opis:
Vertical-axial tidal current turbine is the key for the energy converter, which has the advantages of simple structure, adaptability to flow and uncomplex convection device. It has become the hot point for research and application recently. At present, the study on the hydrodynamic performance of vertical-axial tidal current turbine is almost on 2-D numerical simulation, without the consideration of 3-D effect. CFD (Computational Fluid Dynamics) method and blade optimal control technique are used to improve accuracy in the prediction of tidal current turbine hydrodynamic performance. Numerical simulation of vertical-axial tidal current turbine is validated. Fixed and variable deflection angle turbine are comparatively studied to analysis the influence of 3-D effect and the character of fluid field and pressure field. The method, put the plate on the end of blade, of reduce the energy loss caused by 3-D effect is proposed. The 3-D CFD numerical model of vertical-axial tidal current turbine hydrodynamic performance in this study may provide theoretical, methodical and technical reference for the optimal design of turbine.
Źródło:
Polish Maritime Research; 2016, 4; 73-83
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Study of the Effect of Furrows on Biosonar Beamforming in Aselliscus Stoliczkanus Bat
Autorzy:
He, W.
Feng, J.
Gao, L.
Zhang, Z.
Lu, H.
Powiązania:
https://bibliotekanauki.pl/articles/176802.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Aselliscus Stoliczkanus bat
furrows
frequency-selective characteristics
finite element method
beam pattern
Opis:
The Aselliscus Stoliczkanus bat, studied here, has intricately shaped structures surrounding the nostrils. These structures are hypothesised to have influence on animals’ acoustic radiation patterns. Using micro-tomography scanning technique, a 3D digital model of the noseleaf is reconstructed and biosonar beam pattern is analysed using a finite element method based on the 3D noseleaf model. The present research focuses on the conspicuous furrows in noseleaf, and our analysis allows to conclude the followings: a) structural details in noseleaf of Aselliscus Stoliczkanus bat can produce acoustic effects even if it is not adjacent to the nostrils, b) the furrows possess frequency-selective characteristics, c) the furrows have the function to manipulate the direction and width of the outgoing ultrasound wave.
Źródło:
Archives of Acoustics; 2017, 42, 3; 395-399
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A geometric accuracy design method of multi-axis NC machine tool for improving machining accuracy reliability
Metoda projektowania i poprawy niezawodności dokładności obróbczej wieloosiowej obrabiarki NC wykorzystująca pojęcie dokładności geometrycznej
Autorzy:
Cai, L.
Zhang, Z.
Cheng, Q.
Liu, Z.
Gu, P.
Powiązania:
https://bibliotekanauki.pl/articles/301459.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
machine tool
geometric error
accuracy distribution
machining accuracy reliability
multi-body system theory
obrabiarka
błąd geometryczny
rozkład dokładności
niezawodność dokładności obróbki
teoria układów wielomasowych
Opis:
The reliability of machining accuracy is of great significance to performance evaluation and optimization design of the machine tools. Different geometric errors have various influences on the machining accuracy of the machine tools. The main emphasis of this paper is to propose a generalized method to distribute geometric accuracy of component for improving machining accuracy reliability under certain design requirements. By applying MBS theory, a comprehensive volumetric model explaining how individual errors in the components of a machine affect its volumetric accuracy (the coupling relationship) was established. In order to reflect the ability to reach the required machining accuracy, the concept of machining accuracy reliability is proposed in this paper. Based on advanced first order and second moment (AFOSM) theory, reliability and sensitivity with single failure modes were obtained and the model of machining accuracy reliability and the model of machining accuracy sensitivity with multiple failure modes were developed. By taking machining accuracy reliability as a measure of the ability of machine tool and taking machining accuracy sensitivity as a reference of optimizing the basic parameters of machine tools to design a machine tool, an accuracy distribution method of machine tools for improving machining accuracy reliability with multiple failure modes was developed and a case study example for a five-axis NC machine tool was used to demonstrate the effectiveness of this method. It is identified that each improvement of the geometric errors leads to a decrease in the maximum values and mean values of possibility of failure, and the gaps among reliability sensitivity of geometric parameter errors improved also decreased. This study suggests that it is possible to obtain the relationships between geometric errors and specify the accuracy grades of main feeding components of mechanical assemblies for improving machining accuracy reliability.
Niezawodność w zakresie dokładności obróbki ma wielkie znaczenie dla oceny funkcjonowania oraz projektowania optymalizacyjnego obrabiarek. Różne błędy geometryczne mają różny wpływ na dokładność obrabiarek. Głównym celem niniejszej pracy jest zaproponowanie uogólnionej metody rozkładu dokładności geometrycznej elementów składowych obrabiarki, pozwalającej na poprawę niezawodności w zakresie dokładności obróbczej przy spełnieniu pewnych wymagań projektowych. Dzięki zastosowaniu teorii układów wielomasowych MBS, opracowano kompleksowy model wolumetryczny, który wyjaśnia, w jaki sposób pojedyncze błędy występujące w elementach składowych obrabiarki wpływają na jej dokładność wolumetryczną (relacja sprzężeń). Zaproponowane w prezentowanym artykule pojęcie niezawodności dokładności obróbki odnosi się do możliwości uzyskania przez urządzenie wymaganej dokładności obróbki W oparciu o zaawansowaną teorię estymacji momentów AFOSM (Advanced First Order and Second Moment therory), obliczono niezawodność i czułość dla przypadku wystąpienia pojedynczej przyczyny uszkodzenia oraz opracowano model niezawodności dokładności obróbki oraz model czułości dokładności obróbki dla przypadku wystąpienia wielu przyczyn uszkodzeń. Przyjmując niezawodność dokładności obróbki za miarę poprawnego działania obrabiarki oraz przyjmując czułość dokładności obróbki za punkt odniesienia dla optymalizacji projektowej podstawowych parametrów obrabiarek, opracowano metodę, opartą na rozkładzie dokładności obrabiarki, mającą na celu poprawę niezawodności dokładności obróbki dla przypadku wystąpienia wielu przyczyn uszkodzeń. Skuteczność metody wykazano na przykładzie pięcio-osiowej obrabiarki NC. Stwierdzono, że każda korekta błędu geometrycznego prowadzi do spadku maksymalnych i średnich wartości możliwości wystąpienia uszkodzenia oraz zmniejsza rozstęp między poszczególnymi czułościami niezawodnościowymi skorygowanych błędów parametrów geometrycznych. Przedstawione badania wskazują, że możliwe jest ustalenie związku pomiędzy błędami geometrycznymi oraz określenie stopni dokładności głównych elementów składowych zespołów mechanicznych odpowiedzialnych za ruch posuwowy obrabiarki w celu poprawy niezawodności dokładności obróbki.
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 1; 143-155
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Soft-tissue preservation in the Lower Cambrian linguloid brachiopod from South China
Autorzy:
Zhang, Z
Han, J.
Zhang, X.
Liu, J.
Shu, D.
Powiązania:
https://bibliotekanauki.pl/articles/20001.pdf
Data publikacji:
2004
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
Lingulellotreta malongensis
Chengjiang Lagerstatte
soft tissue preservation
lophophore
brachiopod
linguloid brachiopod
China
Linguloidea
gastrointestinal tract
Cambrian
Lower Cambrian
paleontology
Opis:
The organization of the lophophore and the digestive system are recognized as two of the diagnostic characters in the definition of higher brachiopod taxa, and hence play a major role in their phylogenetic analysis, their structure, however, is very rarely fossilized. Here we describe and interpret specimens of the brachiopod Lingulellotreta malongensis, from the Lower Cambrian Chengjiang Lagerstätte (South China), one of the earliest known taxa of the Lingulellotretidae, in which lophophores and intact, U−shaped digestive tracts are extraordinarily well−preserved. The lophophore, with clearly preserved tentacles, corresponds to an early spirolophe developmental stage. The digestive tract consists of a mouth, esophagus, distended stomach, intestine and an anterior anus, and differs from that of the Chengjiang obolid Lingulella chengjiangensis by the presence of the dilated stomach and by the absence of a looped intestine as in Lingula. In addition, the relative sizes of the mantle and visceral cavities of Lingulellotreta malongensis also are described. These fossils demonstrate that by the Atdabanian brachiopods had already possessed advanced features, and suggest that a lophophore and a U−shaped intestine with an anterior anus are brachiopod plesiomorphies.
Źródło:
Acta Palaeontologica Polonica; 2004, 49, 2
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multi-direction digital moving mask method for fabricating continuous microstructures
Autorzy:
Zhang, Z
Gao, Y
Luo, N
Zhong, K
Liu, Z
Powiązania:
https://bibliotekanauki.pl/articles/175088.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
multi-direction digital moving mask
superposition
quantization
Opis:
The multi-direction digital moving mask method, employing the superposition of the exposure along various moving directions, is developed for fabricating continuous microstructures. The mask pattern corresponding to each moving direction is determined by projecting the target dose profile in the corresponding moving direction. All the mask patterns are dynamically exposed on the same substrate layer by layer so as to form a 3D profile of the exposure dose. The selection criterion of a quantization number and moving-direction number is discussed. For verification of the multi-direction moving method, experiments are performed to fabricate a square pyramid array and square-based microlens array by moving along two orthogonal directions, and round-based microlens array by moving along six directions.
Źródło:
Optica Applicata; 2015, 45, 1; 79-88
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Trunk ornament on the palaeoscolecid worms Cricocosmia and Tabelliscolex from the Early Cambrian Chengjiang deposits of China
Autorzy:
Han, J
Liu, J.
Zhang, Z.
Zhang, X.
Shu, D.
Powiązania:
https://bibliotekanauki.pl/articles/23260.pdf
Data publikacji:
2007
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
Tabelliscolex hexagonus
Palaeoscolecida
Priapulida
Chengjiang deposit
Cricocosmia jinningensis
trunk ornament
fossil worm
China
Early Cambrian
Cambrian
Lower Cambrian
paleontology
Opis:
Cricocosmia jinningensis, one of the most abundant palaeoscolecid worms from the Lower Cambrian Chengjiang deposits of south China, was originally described as bearing double longitudinal rows of lateral conical sclerites on the trunk. New observation reveals that the ventral trunk bears an additional set of ventral sclerites while the lateral sclerites display a tubercle−bearing (inner surface) and net−like (outer surface) microstructure similar to that of Tabelliscolex hexagonus. These findings mean that: (1) Cricocosmia shows a dorso−ventral and antero−posterior differentiation in trunk ornament; (2) as seen from the microstructure, Cricocosmia is close to Tabelliscolex hexagonus, supporting the idea that lobopodians and arthropods, both of which show an upper capping layer in the outer sclerites, are more closely related than the palaeoscolecidans; and (3) the similarities among the scalids, pharyngeal teeth and the trunk spines of palaeoscolecidans are superficial. Tabelliscolex maanshanensis sp. nov., characterized by an inner concentric circlet of laminae in each tubercle of the lateral trunk plate, is proposed herein. Element mapping reveal that four known pathways of preservation can be found co−occurring in a single specimen of Cricocosmia or Tabelliscolex, which sheds new light on the preservation of the Chengjiang fossils.
Źródło:
Acta Palaeontologica Polonica; 2007, 52, 2
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Provenance-specific climate sensitivity of Pinus massoniana – a multi-environmental trial in subtropical China
Autorzy:
Zhang, Z.
Jin, G.
Feng, Z.
Sun, L.
Zhou, Z.
Powiązania:
https://bibliotekanauki.pl/articles/2078265.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
Pinus massoniana
provenance
climate change
wood density
radial growth
Opis:
Climate change is causing changes in tree species performance and distribution, impacting breeding programme effectiveness. Our aim was to analyse the effects of provenance and climatic factors on the annual ring density of Masson pine (Pinus massoniana Lamb.) at different experimental sites and potential breeding strategies that may be developed in response to future climate change. The study trees represented provenances originating from the western, east-central, northern, and southern regions of P. massoniana distribution in China. The wood density differed significantly among provenances. A multisite variance analysis test showed that the type B correlation coefficients for ring density at the two sites stud- ied were less than 0.8, indicating an interaction effect of genotype by environment (G×E) on tree ring density. Climatic factors directly affected the wood density properties. At Chun’an (CA), the maximum latewood density (MXD) and minimum earlywood density (MND) were positively correlated with absolute maximum temperatures in August and May of the current growing season, respectively. At Taizi Mountain (TZS), MXD was significantly positively correlated with absolute maximum temperature in September of the current year and significantly negatively correlated with precipitation in June. MND was significantly positively correlated with absolute maximum temperature in May of the current year and significantly negatively correlated with precipitation in April. The climatic effects on P. massoniana wood density differed among seed-source origins. This study showed that ring density characteristics differed significantly among provenances, and provenance selection could promote wood density. MXD and MND exhibited significant genotype-by-environment interaction effects, and significant correlations were found between ring density and temperature and precipitation conditions. These findings suggest that climatic factors and site condi- tions in addition to genetics could be strong drivers of wood density variation, and/or that wood density is a highly plastic trait.
Źródło:
Dendrobiology; 2021, 85; 3-18
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efficient learning variable impedance control for industrial robots
Autorzy:
Li, C.
Zhang, Z.
Xia, G.
Xie, X.
Zhu, Q.
Powiązania:
https://bibliotekanauki.pl/articles/200716.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
variable impedance control
reinforcement learning
efficient
Gaussian process
industrial robots
impedancja
poprawa efektywności
wydajność
model Gaussa
roboty przemysłowe
Opis:
Compared with the robots, humans can learn to perform various contact tasks in unstructured environments by modulating arm impedance characteristics. In this article, we consider endowing this compliant ability to the industrial robots to effectively learn to perform repetitive force-sensitive tasks. Current learning impedance control methods usually suffer from inefficiency. This paper establishes an efficient variable impedance control method. To improve the learning efficiency, we employ the probabilistic Gaussian process model as the transition dynamics of the system for internal simulation, permitting long-term inference and planning in a Bayesian manner. Then, the optimal impedance regulation strategy is searched using a model-based reinforcement learning algorithm. The effectiveness and efficiency of the proposed method are verified through force control tasks using a 6-DoFs Reinovo industrial manipulator.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2019, 67, 2; 201-212
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Soft-part preservation in a linguliform brachiopod from the lower Cambrian Wulongqing Formation [Guanshan fauna] of Yunnan, South China
Autorzy:
Hu, S
Zhang, Z.
Holmer, L.E.
Skovsted, C.B.
Powiązania:
https://bibliotekanauki.pl/articles/20740.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
paleontology
preservation
linguliform brachiopo
Lower Cambrian
Cambrian
Wulongqing Formation
Yunnan Province
South China
brachiopod
Linguliformea
benthic community
China
Opis:
Linguliform brachiopods were important components of early Cambrian benthic communities. However, exceptionally preserved soft parts in Cambrian linguliform brachiopods are extremely sparse, and the most important findings are from the early Cambrian Chengjiang Konservat Lagerstätte of Kunming, southern China. Here we describe the first record of preserved soft−part anatomy in a linguliform brachiopod from the early Cambrian Guanshan fauna (Wulongqing Formation, Palaeolenus Zone); a unit which is considerably younger than the Chengjiang fauna. The well preserved soft anatomy include linguliform pedicles, marginal setae and, in a few cases, an intact lophophore imprint. The pedicle has pronounced surface annulations, with its proximal−most part enclosing the apex of the ventral pseudointerarea; the pedicle is up to 51 mm long, corresponding to more than 4 times the sagittal length of the shell, and 12% of the maximum valve width. In details of their preservation, these new fossils exhibit striking similarities with the linguliforms from the older Chengjiang fauna, and all specimens are preserved in a compressed state as flattened impressions. The new linguliform has an elongate oval to subtriangular shell and an elongate triangular ventral pseudointerarea; the pedicle emerged from an apical foramen through a poorly preserved internal pedicle tube. The new linguliform is most similar to the mostly organic−shelled siphonotretoid−like brachiopod Acanthotretella spinosa, recently described from the classic middle Cambrian Burgess Shale Konservat Lagerstätte, British Columbia, Canada. The new species Acanthotretella decaius sp. nov. is described; it differs from A. spinosa in having a slightly thicker pedicle, and a larger and more rigid, probably partly mineralised shell, indicating that the mostly organic shell of A. spinosa may represent a secondary reduction of shell mineralisation. However, the spine−like setae of the new species are unfortunately poorly preserved only at the margin of the shell, but the new species is referred tentatively to the Superfamily Siphonotretoidea. The occurrence of A. decaius in the Guanshan fauna is the first lower Cambrian (Series 2, early Stage 4) record of both Acanthotretella and siphonotretoids, and it represents the first description of a lophophore and digestive tract from the siphonotretoid lineage.
Źródło:
Acta Palaeontologica Polonica; 2010, 55, 3; 495-505
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimal combinatorial replacement policy under a given maintenance interval for the combined governor in diesel locomotives
Optymalna strategia wymiany kombinatorycznej dla danej częstotliwości przeglądów regulacji mieszanej w lokomotywach spalinowych
Autorzy:
Gao, W.
Zhang, Z.
Zhou, Y.
Wang, R.
Jiang, L.
Powiązania:
https://bibliotekanauki.pl/articles/302197.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
modele niezawodności
rozkład Weibulla
strategia wymiany kombinatorycznej
lokomotywa spalinowa o mieszanej regulacji
reliability models
mixed-Weibull distribution
combinatorial replacement policy
combined governor of diesel locomotives
Opis:
Combined governor is one of key components in diesel locomotives, as a subcomponent it must meet the existing maintenance periodic of the diesel locomotive, while it is passively replaced or maintained in a midway because of over/under-maintenance in practice. In this paper, four reliability models of a sequential PM cycle are developed using three years of maintenance data of combined governors in one Chinese Railway Bureau to determine its reliability distribution, in which some zero-failure data and censor data are used. Meanwhile, a novel combinatorial replacement (CR) policy is proposed to optimize its preventive maintenance (PM), in which a component is replaced several times using a preventively maintained one in a given operational interval. After that, necessary optimizations are introduced based on the determined reliability models and the maintenance interval given by the PM criterion of diesel locomotives (23000km ~ 25000km), and then the genetic algorithm is also used to solve the constraint optimization function. Results show that the proposed CR policy is the best policy among the existing policy and the general (T, δ) policy, and other results can be viewed as an optional policy when spare components are limited.
Regulacja mieszana jest jednym z kluczowych elementów w lokomotywach spalinowych, i jako taka musi być ujęta w istniejącym systemie konserwacji okresowej lokomotyw spalinowych. W praktyce jednak, podlega ona biernej wymianie lub przedwczesnej konserwacji z powodu niewystarczających lub nadmiernych praktyk utrzymania w ruchu. W niniejszym artykule opracowano cztery modele niezawodnościowe sekwencyjnego cyklu konserwacji zapobiegawczej z wykorzystaniem danych z trzech lat konserwacji mieszanej regulacji jednego Biura Kolei Chińskich w celu ustalenia ich rozkładu niezawodności, przy użyciu wybranych danych nt. nieuszkadzalności oraz danych cenzurowanych. W celu optymalizacji konserwacji zapobiegawczej (PM), zaproponowano nową strategię wymiany kombinatorycznej (combinatorial replacement - CR), w której element składowy zostaje kilkakrotnie zastąpiony innym elementem uprzednio poddanym konserwacji zapobiegawczej w danym okresie eksploatacyjnym. Następnie, wprowadzono konieczne optymalizacje na podstawie opracowanych modeli niezawodnościowych oraz częstotliwości przeglądów podanej w kryteriach konserwacji zapobiegawczej lokomotyw spalinowych (23000 km ~ 25000 km). W dalszej kolejności, wykorzystano algorytm genetyczny do rozwiązania funkcji optymalizacji ograniczeń. Wyniki pokazują, że proponowana strategia CR jest najlepsza spośród istniejących strategii i ogólnych strategii (T, δ); inne wyniki można traktować jako strategię opcjonalną w sytuacji gdy dostępność elementów zamiennych jest ograniczona.
Źródło:
Eksploatacja i Niezawodność; 2013, 15, 2; 89-98
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimal quasi-periodic preventive maintenance policies for a repairable system with stochastic maintenance interval
Optymalna strategia quasi-okresowej konserwacji zapobiegawczej systemu naprawialnego – czas między przeglądami jako wielkość stochastyczna
Autorzy:
Gao, W.
Zhang, Z.
Ji, H.
Zhou, Y.
Liu, Q.
Powiązania:
https://bibliotekanauki.pl/articles/301503.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
maintenance
quasi-periodic imperfect preventive maintenance policy
implemented period
stochastic preventive maintenance interval
konserwacja
strategia quasi-okresowej niepełnej konserwacji zapobiegawczej
dopuszczalny okres realizacji przeglądu
czas między przeglądami jako wielkość stochastyczna
Opis:
The usual preventive maintenance (PM) of a repairable system is done before failure at integer multiples of time T. In some real cases, PM cannot be performed as soon as a planned PM period is reached because of effects of some random factors, while it is usually done within an implemented period, and thus it makes the PM period become a stochastic interval. From this viewpoint, a quasi-periodic imperfect preventive maintenance policy is proposed in this paper, in which a repairable system experiences either a minor failure or catastrophic failure when a failure occurs, and the first (N-1) PM intervals is divided into a planned PM period and an implemented period. In the former, the system may be suffered an unplanned PM for removing a catastrophic failure and performing a PM, whereas in the latter, the system is preventively maintained following an occurrence of a catastrophic failure or a dynamic PM plan, whichever comes first. At the Nth PM interval, the system is replaced either when a catastrophic failure occurs or operational time reaches T, whichever comes first. An optimization of the proposed mode is introduced, the existence and the uniqueness of the optimal solution are presented, and a useful constraint of the implemented period is obtained. Finally, a real case study of PM on Chinese diesel locomotives is examined to illustrate the proposed maintenance policy.
Zazwyczaj przeglądy okresowe systemu naprawialnego wykonuje się przed wystąpieniem uszkodzenia, w określonych odstępach czasu stanowiących całkowitą wielokrotność czasu T. W warunkach rzeczywistych, jednak, nie zawsze można przeprowadzić przegląd w zaplanowanym terminie ze względu na działanie pewnych losowych czynników, natomiast zazwyczaj przeprowadza się go w dopuszczalnym okresie realizacji, w związku z czym przedział czasu między przeglądami okresowymi staje się wielkością stochastyczną. Biorąc powyższe pod uwagę, w niniejszej pracy zaproponowano strategię quasi-okresowej konserwacji zapobiegawczej, która zakłada, że system naprawialny może ulec albo drobnemu uszkodzeniu albo uszkodzeniu katastroficznemu, a czas, do którego należy wykonać pierwszy przegląd okresowy (N-1) można podzielić na zaplanowany czas przeprowadzenia przeglądu oraz dopuszczalny okres realizacji przeglądu. W pierwszym przypadku, może wystąpić konieczność przeprowadzenia nieplanowanej konserwacji systemu mającej na celu usunięcie uszkodzenia katastroficznego, natomiast w drugim, konserwację przeprowadza się po wystąpieniu uszkodzenia katastroficznego lub zgodnie z dynamicznym harmonogramem przeglądów, zależnie od tego, która z sytuacji zaistnieje wcześniej. W N-tym terminie przeglądu okresowego, dokonuje się wymiany systemu, albo wskutek wystąpienia uszkodzenia katastroficznego albo gdy czas pracy systemu osiągnie wartość T, zależnie od tego, co nastąpi wcześniej. W artykule przedstawiono optymalizację proponowanego trybu działania, wykazano istnienie i jednoznaczność optymalnego rozwiązania oraz wyznaczono przydatne ograniczenie dopuszczalnego okresu realizacji. Na koniec, proponowaną politykę konserwacji zapobiegawczej zilustrowano studium przypadku chińskich lokomotyw spalinowych.
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 3; 389-397
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rejuvenating older apple trees by root pruning combined with arbuscular mycorrhizal fungi
Autorzy:
Zhang, J.
Liu, J.
Zhang, Z.
Pan, S.
Yang, L.
Yang, S.
Powiązania:
https://bibliotekanauki.pl/articles/11855204.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Opis:
Older apple trees often demonstrate physiologically unreasonable shoot distribution due to root system aging, which results in lower fruit yield and poor fruit quality. Therefore this study was conducted to test whether root pruning combined with arbuscular mycorrhizal fungi could restore growth potential of fortyyear-old Red Fuji apple trees (Malus × domestica Borkh.) in a commercial orchard in 2013, by root pruning along both sides of rows, 80 cm from the trunk, to a depth of 30 cm and application of 100 ml arbuscular mycorrhizal inoculum per plant. Results showed that the percentage of root colonized by mycorrhizal fungi increased as root pruning was combined with arbuscular mycorrhizal fungi, however mycorrhizal colonization was not seen in the control roots and roots only by root pruning. For control tree total number of shoots decreased by 28.22% in 2015 than in 2013 and shoots mainly distributed in the outer canopy accounting for 58.10% of the total, which caused the lower light intensity inside the canopy, followed by lower fruit yield and poor fruit quality. Compared to control plant, shoot reduced by 33.96 and 38.51% in the outer canopy but increased by 97.99 and 123.69% in the inner canopy in 2015, as well as 390.20 and 478.43% in the vertical height of 1.5 to 2.5 m canopy, respectively treated by root pruning alone and combined with arbuscular mycorrhizal fungi. Root pruning alone and combined with arbuscular mycorrhizal fungi also raised the relative light intensity by 38.71 and 60.26% in the inner canopy in 2015, subsequent fruit yield by 315.79 and 373.68% respectively, in comparison to control plant. Shoot re-distribution improved fruit quality such as increase in firmness and soluble solid. Data indicated that the effect of root pruning combined with arbuscular mycorrhizal fungi on the rejuvenation of older apple trees was stronger than root pruning alone. It is therefore concluded that root pruning combined with arbuscular mycorrhizal fungi can think of as a measure to renew the older apple trees.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2017, 16, 3; 27-35
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of recent coastline evolution due to marine reclamation projects in the Qinzhou Bay
Autorzy:
Yan, Y.
Zhang, Z.
Wang, C.
Zhang, L.
Huang, Y.
Zhang, J.
Powiązania:
https://bibliotekanauki.pl/articles/258862.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
Qinzhou Bay
marine reclamation
remote sensing
geospatial analysis
coastline evolution
Opis:
Intense marine reclamation activities bring obvious benefits, meanwhile, these activities also influence the coastal natural formation, hydrodynamic processes and water environment etc. In order to investigate the exact influence in the Qinzhou Bay brought by marine reclamation behaviors in recent years, based on the remote sensing image data in the Qinzhou Bay in 2006, 2008, 2009, 2012 and 2014, with the help of GIS and RS software, the thesis interprets Qinzhou Bay coastline and artificial reclamation by man-machine interaction and makes quantitative analysis in the Qinzhou Bay coast evolution recently. The results show: (1) Qinzhou Bay coastal morphology change degree was strong in 2006 - 2012 and the coastline changed greatly. Originally part of the natural shore segments which had twists and turns were gradually filled into artificial coast, the coast constantly advanced to the sea, coastline became regular and straight; (2) The change degree of coastline was relatively small in 2006-2008, the average artificial coastline increased 8.86 km/a, the average artificial reclamation area was 20.79 km2 /a; in 2008-2012, the change range of coastline was the greatest, coastline changed most severely, the average artificial coastline increased 16.07 km/a, the average artificial reclamation area was 58.52 km2 /a; however, in 2012-2014, coastline change degree relatively slowed, the average artificial coastline increased 4.04 km per year, the average artificial reclamation area was 3.464 km2 /a. (3) Compared to the studies of predecessors, the innovation of this paper is that it is the first to carry out the detailed research on coastline evolution caused by reclamation engineerings of the Qinzhou Bay, then formed the change results on coastline that caused by intense human activities in the Qinzhou Bay, provided the area of the marine environment protection with full and accurate data.
Źródło:
Polish Maritime Research; 2017, S 2; 188-194
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
PIV measurement of tube-side in a shell and tube heat exchanger
Autorzy:
Wang, K.
Zhang, Z.
Liu, Q.
Tu, X.
Hyoung-Bum, K.
Powiązania:
https://bibliotekanauki.pl/articles/778192.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
shell and tube heat exchanger
tube-side
PIV
unsteady flow
Opis:
In order to improve the performance of the shell and tube heat exchanger, a porous baffle and a splitter bar are employed in this research. Through the arrangement of the porous baffle in the tube-side inlet and the splitter bar in the tube, the flow distribution of liquid in the heat exchanger is improved. PIV technology is used to investigate the unsteady flow in the tube-side inlet and the outlet of different models. The porous baffle significantly improves the flow of fluid in the shell and tube heat exchanger, especially by eliminating/minimizing the maldistribution of fluid flow in the tube-side inlet. The performance of the arc baffle is better than that of the straight baffle. The splitter bar has a minimal effect on the flow field of the tube-side inlet, but it effectively improves the flow in the tube bundle and restrains the vortex generation in the tube-side outlet.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 1; 60-66
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A study of bubble-particle interactions in a column flotation process
Autorzy:
Cheng, G.
Shi, C.
Yan, X.
Zhang, Z.
Xu, H.
Lu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/109635.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
particle
bubble
column flotation
collision
attachment
detachment
Opis:
Bubble-particle interactions play an important role in flotation. This study examines the behaviour of bubble clusters in a turbulent flotation cell. Particularly, the bubble-particle interaction characteristics in flotation are investigated. The bubble size in a flotation column was measured using an Olympus i-SPEED 3 high-speed camera. Relationships between the circulating volume, bubble size and bubble terminal velocity were discussed. Probabilities of collision, attachment, detachment and acquisition between bubbles and particles in different circulating volumes were calculated based on the flotation kinetic theory. Using the extended Derjaguin–Landau–Verwey–Overbeek (EDLVO) theory, the relationship between the potential energy and distance in bubble-particle interaction was analysed. The results demonstrated that as the circulating volume increased, the bubble size and velocity decreased. When the circulating volume increased from 0.253 to 0.495 m3/h, the bubble diameter decreased from 511 to 462 μm, and the corresponding bubble velocity decreased from 43.1 to 37.5 mm/s. When the circulating volume remained constant as the particle size increased, probabilities of collision, attachment, detachment and acquisition increased. When the particle size remained constant as the circulating volume increased, these probabilities also increased. At a constant circulating volume as the particle size increased, the absolute value of the total potential energy between the particle and bubble increased. When the distance between the bubble and particle was 30 nm, the energy barrier appeared.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 1; 17-33
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
One step purification of impurities in the leachate of weathered crust elution-deposited rare earth ores
Autorzy:
Zhou, F.
Feng, J.
Wang, Z.
Xu, Y.
Zhang, Z.
Chi, R.
Powiązania:
https://bibliotekanauki.pl/articles/110333.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
leachate
weathered crust
rare earth ore
leachate purification
precipitation
Opis:
It is necessary to control and reduce the high content of Al3+, Cu2+ and Pb2+ ions in the leachate of weathered crust elution-deposited rare earth ore to facilitate the rare earth recovery and the quality of rare earth products. Neither NH4HCO3 nor Na2S are suitable for removal of all impurity ions and meanwhile maintain high rare earth recovery. Conventionally, NH4HCO3 is firstly adopted to remove Al3+, and then Cu2+ and Pb2+ are removed by using Na2S. This two steps purification process is quite long and results in lots of complication in operation. In this paper, a one-step purification by using the compound of NH4HCO3 and Na2S was proposed to remove Al3+, Cu2+ and Pb2+. The results showed that after purification 89% Cu, 92% Pb and 74% Al were removed from the leachate solution by using 0.1 M compound of NH4HCO3/Na2S, while maintaining 89% rare earth. The optimal purification parameters were: volume ratio of NH4HCO3 to Na2S of 9:1, volume ratio of compound to leachate of 0.05:1, precipitation time of 30 min.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 1188-1199
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Enhancing light harvesting of organic solar cells by using hybrid microlenses
Autorzy:
Xiao, X
Zhang, Z
Xie, S
Liu, Y
Hu, D
Du, J
Powiązania:
https://bibliotekanauki.pl/articles/174313.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
organic solar cells
hybrid microlens
light harvesting
achromatization
Opis:
Organic solar cells have drawn intense attentions in recent years due to their inherent advantages. But the relatively low power conversion efficiency is the main obstacle in the way of organic solar cell commercialization. One of the main reasons that limit the power conversion efficiency is the mismatch between electrical transmission properties and light absorption properties in an organic active layer. In this work, a highly efficient light trapping scheme with a hybrid microlens array is proposed to resolve this contradiction. This structure can achieve broadband absorption enhancement in the spectrum of interest by chromatic aberration correction and hole parameter adjustment. And the light trapping element can be separated from cells to avoid direct contact with an organic layer that may cause electrical defects. Moreover, it is also compatible with low cost manufacturing technologies.
Źródło:
Optica Applicata; 2015, 45, 1; 89-100
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application the optimization models to analysis of the industrial pollutant emission in China
Autorzy:
Zhang, Z.
Liu, G.-D.
Guo, H.
Liu, L.
Deng, S.-H.
Powiązania:
https://bibliotekanauki.pl/articles/950041.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
industrial emissions
air pollution
mathematical models
sulfur dioxide
air pollutant emission
environmental indicators
industrial pollutants
smoke emission
emisja przemysłowa
zanieczyszczenie powietrza
model matematyczny
dwutlenek siarki
ditlenek siarki
emisja zanieczyszczeń powietrza
wskaźniki środowiskowe
zanieczyszczenia przemysłowe
emisja dymu
Opis:
An industrial planning is made based on the optimization model. Factor analysis was used to reject relativity among the environmental indicators. Then, thirty nine industries were clustered into four clusters. Lastly, optimization model was used to plan the industrial structure. Adjusting the industrial structure, it is difficult to reduce vast SO2, smoke, and dust with total industrial output value growth; the air pollutant emission only can be decreased by 10%. The parameters of smoke emission are limited constrains for the optimization. The reasonable and feasible way to solve the problem is to introduce the lower smoke emission technique of the cluster 2 and 4 industries.
Źródło:
Environment Protection Engineering; 2013, 39, 1; 87-99
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fatigue Behavior and Mechanism of FV520B-I Owing to the Effect of Loading Frequency on the Fatigue Property in HCF and VHCF Regime
Autorzy:
Wang, J.
Zhang, Y.
Shi, B.
Zhao, Q.
Sun, Q.
Zhang, Z.
Lu, H.
Powiązania:
https://bibliotekanauki.pl/articles/353784.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ultrahigh loading frequency
FV520B-I
fatigue strength
fatigue conversion model
Opis:
Fatigue property of FV520B-I is affected by the ultrahigh loading frequency significantly, and the ultrasonic fatigue experimental data can’t be employed directly to analyze the fatigue failure in the actual remanufacturing engineering. However few theories about the effect of loading frequency on the fatigue property of FV520B-I has ever been proposed. In this paper, both ultrasonic experiment and conventional experiment are conducted out to obtain the fatigue data. The effect of loading frequency on the fatigue data distribution is discussed firstly, its fatigue limit declines with the increase of the loading frequency. Then the fracture surface observations are captured, the fatigue property and fatigue behavior mechanism of FV520B-I is examined by analyzing the fracture surface features, crack initiation and failure observations. A new material frequency correction factor is proposed and introduced to eliminate the influence of the loading frequency on the FV520B-I fatigue property. FV520B-I empirical fatigue life conversion model and fatigue strength conversion model are established with comprehensive use of a fitting algorithm based on the combination of experimental data and classic formula. A clear understand of the effect of loading frequency on the fatigue property of FV520B-I is novel and has an important significance in guaranteeing the accuracy of the actual fatigue analysis of FV520B-I in the remanufacturing engineering.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 347-357
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modification Mechanism and Growth Process of Al3(Sc, Zr) Particles in As-cast Al-Si-Mg-Cu-Zr-Sc Alloy
Autorzy:
Li, Y.
Du, X.
Fu, J.
Zhang, Y.
Zhang, Z.
Zhou, S.
Wu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/382672.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
solidification process
Al3(Sc, Zr)
three-dimensional morphology
eutectic growth
krzepnięcie stopu
morfologia trójwymiarowa
wzrost eutektyczny
Opis:
In this study, the modification mechanism and growth process of Al3(Sc, Zr) particles in as-cast Al-Si-Mg-Cu based alloy with addition of Sc and Zr were systematically investigated. It was found that 0.57 wt-%Sc addition caused a significant refinement in the average grain size of the investigated alloy, which brought about a remarkable transformation in as-cast microstructure, from thick dendritic shape to fine equiaxed structure. A large amount of primary Al3(Sc, Zr) particles with the dimension of around 5-6 μm were also observed within the equiaxed grain. Due to the identical orientation and similar crystal structure between primary Al3(Sc, Zr) particles and α-Al matrix, the primary particles always served as heterogeneous nucleus for the α-Al matrix. In addition, these cusped cubic primary Al3(Sc, Zr) particles showed triangle, star, rhomboid morphologies are generated from sectioning the particle in (111), (100) and (110) planes, respectively. Particularly, the typical eutectic structure which contained odd number-layer (Al3(Sc, Zr)+α-Al+ ... +Al3(Sc, Zr)) was observed within the investigated particles.
Źródło:
Archives of Foundry Engineering; 2018, 18, 2; 51-56
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Symulacja MES i optymalizacja prędkości gięcia w procesie kucia ciężkich, jednolitych wałów korbowych z ciągłym przebiegiem włókien metodą N-TR
FE simulation and bending speed optimization of N-TR continuous grain flow forging process for solid heavy crankshaft
Autorzy:
Zhang, L. H.
Zhang, Z. C.
Li, S. Y.
Cui, H.
Cui, H. X.
Powiązania:
https://bibliotekanauki.pl/articles/211742.pdf
Data publikacji:
2006
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Obróbki Plastycznej
Tematy:
ciężkie wały korbowe
kucie z ciągłym przebiegiem włókien
spęczanie
N-TR
symulacja MES
optymalizacja procesu
heavy crankshaft
continuous grain flow forging
upset forging
FE simulation
process optimization
Opis:
Autorzy przedstawili metodę N-TR (nowa TR) będącą nowym procesem kucia ciężkich, jednolitych wałów korbowych z ciągłym przebiegiem włókien. W metodzie N-TR mechaniczne sprzężenie spęczania z równoczesnym wyginaniem, spowodowane działaniem mechanizmu kolanowego w metodzie TR, zostało zlikwidowane dzięki zastosowaniu siłownika powodującego niezależne wyginanie, co umożliwia optymalizację procesu kucia. Przeprowadzono optymalizację procesu kucia ciężkiego wału korbowego typu 601 metodą N-TR korzystając z symulacji MES w programie DEFORM-3D. Badano związek stopnia wypełnienia wykrojów narzędzi z prędkością wyginania. Stwierdzono, że niższa prędkość wyginania na początku procesu i wyższa prędkość wyginania na końcu procesu sprzyjają wypełnieniu wykrojów. Uzyskano optymalne wypełnienie wykrojów narzędzi dla technicznie realnych prędkości wyginania.
N-TR (new TR) is a new continuous grain flow forging process for solid heavy crankshafts forming proposed by the authors. In N-TR process, the mechanical coupling of upsetting and bending action via the toggle mechanism in TR process is decoupled by an independent additional cylinder to provide bending action, which provides the feasibility of process optimization. In this paper, a heavy crankshaft modeled 601 was selected as a case study to optimize the N-TR process with FE simulation in DEFORM-3D. Relationship of die filling versus bending speed-stroke parameters was set up from the simulations, which shows that lower bending speed in the beginning stage and higher speed in the ending stage benefit die filling. Optimum die filling and engineering feasible speed-stroke parameters was acquired.
Źródło:
Obróbka Plastyczna Metali; 2006, 17, 2; 3-13
0867-2628
Pojawia się w:
Obróbka Plastyczna Metali
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Challenges for 10 nm MOSFET process integration
Autorzy:
Östling, M.
Malm, B. G.
Haartman, M.
Hallstedt, J.
Zhang, Z.
Hellström, P. E.
Zhang, S.
Powiązania:
https://bibliotekanauki.pl/articles/309004.pdf
Data publikacji:
2007
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
sstrained silicon
silicon-germanium
silicon-on-insulator (SOI)
high-k dielectrics
hafnium oxide
nanowire
low frequency noise
mobility
metal gate
Opis:
An overview of critical integration issues for future generation MOSFETs towards 10 nm gate length is presented. Novel materials and innovative structures are discussed. The need for high-k gate dielectrics and a metal gate electrode is discussed. Different techniques for strain-enhanced mobility are discussed. As an example, ultra thin body SOI devices with high mobility SiGe channels are demonstrated.
Źródło:
Journal of Telecommunications and Information Technology; 2007, 2; 25-32
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oxygen-containing Tetrazole Salts of 3-Hydrazino-4-amino-1,2,4-triazole (HATr): Nitrogen-rich Ionic Materials with High Thermal Stability
Autorzy:
Wu, J.-T.
Zhang, J.-G.
Yin, X.
Li, T.
Wu, L.
Zhang, Z.-B.
Powiązania:
https://bibliotekanauki.pl/articles/358927.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
energetic salts
thermal stability
oxygen-containing tetrazoles
3-hydrazino-4-amino-1,2,4-triazole
Opis:
Energetic salts of doubly-protonated 3-hydrazino-4-amino-1,2,4-triazole (2-4), and mono-protonated 3-hydrazino-4-amino-1,2,4-triazole (5-7), have been prepared in high yields from the corresponding oxygen-containing tetrazoles by (i) reaction of free acids and neutral 3-hydrazino-4-amino-1,2,4-triazole, or (ii) metathesis reactions of 3-hydrazinium-4-amino-1H-1,2,4-triazolium di-chloride with the silver salts of the corresponding oxygen-containing tetrazoles. All of these energetic salts were fully characterized by single-crystal X-ray diffraction, FT-IR and DSC measurements. All of the structures are dominated by extensive hydrogen bonds due to amino groups, hydrazino groups and oxygen atoms in the molecules. These salts exhibit good thermal stability, especially the salt 3-hydrazinium-4-amino-1H-1,2,4-triazolium 1H,1’H-5,5’-bitetrazole-1,1’-diolate (4), which exhibits a measured onset of decomposition temperature of 237 °C. Quantum chemical calculations, carried out using the Gaussian 03 suite of programs and based on the experimental densities were used to calculate the detonation pressures and velocities of all of the salts.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 1; 217-232
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of TaqMan-based real-time PCR assay based on the E1 genefor the quantitative detection of the Getah virus
Autorzy:
Lin, A.
Hu, X.
Cui, S.
Yang, T.
Zhang, Z.
Li, P.
Guo, M.
Lu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/16647453.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
Getah virus
real-time PCR
TaqMan
detection
Opis:
To develop a sensitive, specific, and rapid approach for the detection Getah virus (GETV), a set of primers targeting the conserved region of the E1 gene was created. The TaqMan-based real-time PCR method for GETV detection was developed by optimizing the reaction conditions. The method demonstrated excellent specificity, and amplification did not occur with the causative agents of all prevalent swine viral infections (CSFV, PRRSV, PRV, PEDV, PTV, and JEV), except GETV. Additionally, upon assessing the sensitivity of the method, the minimum detection limit for GETV was found to be 5.94 copies/μL, which is 10 times higher than that of the traditional PCR approach. Further, the intra- and inter-assay variation coefficients were less than 1%, demonstrating good repeatability. Moreover, GETV was found in 10 of the 20 field serum samples using real-time PCR but only in three of the samples using traditional PCR. Consequently, the first GETV TaqMan-based real-time PCR approach based on the E1 gene was developed for GETV pathogenic diagnoses, and this exhibited high specificity, sensitivity, and repeatability. This assay is practical for the pathogenic diagnosis and epidemiology of GETV.
Źródło:
Polish Journal of Veterinary Sciences; 2023, 26, 1; 21-28
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies