Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Dryzek, E." wg kryterium: Wszystkie pola


Wyświetlanie 1-18 z 18
Tytuł:
Positron Lifetime Measurements of Subsurface Region in Aluminium Alloy and Aluminium Alloy Composite after Dry Sliding
Autorzy:
Dryzek, E.
Powiązania:
https://bibliotekanauki.pl/articles/2043305.pdf
Data publikacji:
2005-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
Opis:
This paper presents positron lifetime studies of the subsurface region of AK12 aluminium alloy and Al$\text{}_{2}$O$\text{}_{3}$-particle-reinforced AK12 aluminium alloy composite after sliding against steel in the pin-on-disc machine. The defect depth profile detected in the AK12 alloy extended up to 300μm but for the composite AK12 the range of this profile was significantly shortened to less than 90μm. The positron lifetime dependence on depth evidences a steep gradient of defect concentration near the surface. The subsurface zones have been also examined using scanning electron microscopy.
Źródło:
Acta Physica Polonica A; 2005, 107, 5; 753-760
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Positron Implantation Profile in Kapton
Autorzy:
Dryzek, J.
Dryzek, E.
Powiązania:
https://bibliotekanauki.pl/articles/2047124.pdf
Data publikacji:
2006-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.-g
Opis:
The discussion presented in the paper focuses on processes accompanying positron implantation in condensed matter. They finally constitute the positron implantation profile which generally does not exhibit the exponential behavior as it is concluded from the Monte Carlo simulation made using the EGSnrc 4.0 code. The simulation was performed for the kapton and two commonly used positron sources $\text{}^{22}$Na and $\text{}^{68}$Ge/g$\text{}^{68}$Ga. New formula for the implantation profile was proposed.
Źródło:
Acta Physica Polonica A; 2006, 110, 5; 577-582
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Positron Annihilation Studies of the Subsurface Zone in Aluminium Alloys
Autorzy:
Dryzek, E.
Dryzek, J.
Powiązania:
https://bibliotekanauki.pl/articles/2047123.pdf
Data publikacji:
2006-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
Opis:
The paper presents positron lifetime studies of the subsurface region of the aluminium cast AK64 alloy containing silicon as a main alloying element after sliding against stainless steel in the pin-on-disc tester. The subsurface zone of the depth exceeding 150μm has been detected. The scanning electron microscopy revealed only the plastically deformed region occurring at the depth up to ca. 50μm and cracks at the depth less than 30μm. The comparison with the results obtained for the AK12 alloy containing almost a twice higher amount of silicon demonstrates the influence of the hard silicon rich particles on the total depth of the subsurface zone. A higher amount of hard particle prevents to some extend the propagation of defects inside the material.
Źródło:
Acta Physica Polonica A; 2006, 110, 5; 569-575
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Positron Annihilation Lifetime Spectroscopy of ABS Objects Manufactured by Fused Deposition Modelling
Autorzy:
Dryzek, M.
Dryzek, E.
Powiązania:
https://bibliotekanauki.pl/articles/1033901.pdf
Data publikacji:
2017-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
61.41.+e
Opis:
Positron annihilation lifetime spectroscopy was used to study acrylonitrile butadiene styrene (ABS) specimens manufactured using fused deposition modelling to explore possibilities of identifying differences in molecular structure. The set of specimens was prepared including square tiles and long rectangular tiles (100 mm and 200 mm long) with all filament roads parallel to the longer edge. All types of tiles were produced with various infill line distance parameter resulting in different overlapping of the roads in horizontal and vertical directions. The slight increase of the ortho-positronium lifetime indicating increase of the mean free volume radius was observed for the longest tiles for which influence of weld interface is expected to be most pronounced. No differences were observed for different infill line distance parameters.
Źródło:
Acta Physica Polonica A; 2017, 132, 5; 1506-1508
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Positron Lifetime Studies of the Subsurface Zones Created under Dry and Lubrication Conditions
Autorzy:
Dryzek, J.
Dryzek, E.
Powiązania:
https://bibliotekanauki.pl/articles/2024223.pdf
Data publikacji:
2001
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
Opis:
We present the measurement of the positron lifetime spectra in the subsurface zones in copper samples with surfaces damaged in dry and lubrication conditions. We observe that close to the damaged surface the single vacancies were present, but deeper in the sample treated in the dry condition the vacancy clusters were detected. A zone with dislocations was located deeper than the zone with the vacancies and their clusters.
Źródło:
Acta Physica Polonica A; 2001, 99, 3-4; 351-354
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural Changes in Surface-Modified Polymers for Medical Applications
Autorzy:
Pamula, E.
Dryzek, E.
Powiązania:
https://bibliotekanauki.pl/articles/1812545.pdf
Data publikacji:
2008-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
82.35.-x
82.35.Lr
78.70.Bj
83.85.Jn
68.37.Ps
Opis:
Biological properties of synthetic polymers can be improved by surface modification with the use of liquid oxidizers. A resorbable biomedical polymer - poly(glycolide-co-ε-caprolactone) (PGCL) was incubated in 0.1 M NaOH for 2, 6, 16, and 24 h, followed by excessive washing and drying in vacuum. Surface properties of the materials before and after modification were evaluated: wettability by contact angle measurements, topography by atomic force microscopy, and chemical functions by infrared spectroscopy. Applied modification improved wettability of PGCL due to creation of chemical oxygenated functionalities, and resulted in a slight alternation of the surface topography and roughness. In order to determine whether NaOH incubation caused structural changes in bulk of PGCL, positron annihilation lifetime spectroscopy, differential scanning calorimetry and viscosity measurements were performed. It was found that the ortho-positronium lifetime in PGCL declines as a function of modification time. It suggests that NaOH incubation causes structural changes in PGCL not only on the surface but also in bulk.
Źródło:
Acta Physica Polonica A; 2008, 113, 5; 1485-1493
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reverse Transformation of Deformation Induced Martensite in Austenitic Stainless Steel
Autorzy:
Dryzek, E.
Sarnek, M.
Powiązania:
https://bibliotekanauki.pl/articles/1196051.pdf
Data publikacji:
2014-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
81.05.Bx
Opis:
Cumulative isochronal annealing of stainless steel 1.4307 samples deformed by compression was investigated using the Doppler broadening of the annihilation line measurements. Higher level of plastic deformation is accompanied not only by higher concentration of defects but also by higher amount of α' martensite. The annealing studies revealed creation of defects in the temperature range between 450C and 650C pointing out the reverse transition of α' martensite to austenite. This is confirmed by magnetic susceptibility and microhardness measurements.
Źródło:
Acta Physica Polonica A; 2014, 125, 3; 710-713
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Positron annihilation in liquid crystals
Autorzy:
Dryzek, E.
Juszyńska-Gałązka, E.
Powiązania:
https://bibliotekanauki.pl/articles/148118.pdf
Data publikacji:
2015
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
liquid crystals
positron annihilation
phase transitions
Opis:
Positron annihilation studies of liquid crystals are reviewed with particular reference to thermotropic liquid crystals with rod-like molecules. The studies of compounds exhibiting smectic A or smectic E phases indicate that local arrangement of dipole molecules play an important role because high electron density at the end group of molecules can influence substantially formation and annihilation of positronium. The obtained ortho-positronium lifetimes in these phases can be explained by antiparallel pairing of molecules in case of the smectic A phase or a structure with a nanosegregation of alkyl chains and others parts of molecules into sublayers and liquid-like state of alkyl chains in case of the smectic E phase.
Źródło:
Nukleonika; 2015, 60, No. 4, part 1; 703-708
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Defect Profile Induced by Friction and Wear Processes Detected by Positron Annihilation Method
Autorzy:
Dryzek, J.
Dryzek, E.
Cleff, B.
Powiązania:
https://bibliotekanauki.pl/articles/1933487.pdf
Data publikacji:
1995-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
Opis:
The positron annihilation studies of defect profile in Cu samples whose surfaces were exposed to the friction and wear processes are presented. The values of the S-parameter and its dependences on the depth from the Cu surface are the functions of the value of the load applied in the sliding contact between two metals. It indicates possibilities of applying the presented measurement method in the industry.
Źródło:
Acta Physica Polonica A; 1995, 88, 1; 129-133
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The implantation profile of positrons emitted in beta plus decay of 48V in water
Autorzy:
Dryzek, J.
Horodek, P.
Dryzek, E.
Powiązania:
https://bibliotekanauki.pl/articles/148130.pdf
Data publikacji:
2009
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
positron implantation range in water
V-48 positron emitter
Opis:
The experimental technique based on scanning of positron implantation profile, hereafter referred to as the DSIP is used for the determination of linear absorption coefficient for positrons emitted from a 48V source into water. This coefficient is equal to 1/(299š62) mi m–1. The determined value is in agreement with the one obtained from the computer simulations using the well known EGS nrc 4.0 and GEANT4 codes. The experimental technique was used for the determination of linear absorption coefficients for 48V positrons in materials of biological origin. The presented data can be useful for PET studies because of similarities of the 18F and 48V positron implantation profiles.
Źródło:
Nukleonika; 2009, 54, 4; 223-226
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Positron Annihilation in Cotton Cellulose
Autorzy:
Golonka, P.
Mayer, J.
Dryzek, E.
Powiązania:
https://bibliotekanauki.pl/articles/2024232.pdf
Data publikacji:
2001
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
42.70.Jk
Opis:
The changes of the cotton fibre microstructure as a result of annealing at temperatures from 20ºC to 300ºC were investigated by positron lifetime spectroscopy and differential scanning calorimetry. The aim of the paper was to examine the cotton cellulose thermal degradation process.
Źródło:
Acta Physica Polonica A; 2001, 99, 3-4; 363-367
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Positron annihilation studies of high-manganese steel deformed by rolling
Autorzy:
Dryzek, E.
Sarnek, M.
Wróbel, M.
Powiązania:
https://bibliotekanauki.pl/articles/146593.pdf
Data publikacji:
2015
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
plastic deformation
positron annihilation
high-manganese steel
Opis:
Positron annihilation spectroscopy (PAS) has been used to study the annealing behavior of cold rolled Fe – 21 wt% Mn steel with 0.05 wt% C. After the initial annealing of defects shown by Doppler broadening of the annihilation line, a slight increase in the annihilation line shape parameter, i.e., the so-called S parameter and then its decrease in the temperature range between 225◦C and 450◦C indicates generation of new defects and their subsequent annealing. This temperature range coincides with X-ray diffraction measurements, which indicate reversion of deformation-induced ε-martensite. However, for annealing in this temperature range with slow cooling of the sample, the formation of ferrite already starts. The results are compared with our previous results for deformed austenitic stainless steel 1.4301 (EN) where only reversion of deformation-induced α'-martensite was detected.
Źródło:
Nukleonika; 2015, 60, No. 4, part 1; 709-712
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Annealing behaviour of plastically deformed stainless steel 1.4307 studied by positron annihilation methods
Autorzy:
Dryzek, E.
Sarnek, M.
Siemek, K.
Powiązania:
https://bibliotekanauki.pl/articles/148014.pdf
Data publikacji:
2013
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
plastic deformation
positron annihilation
stainless steel
Opis:
Isochronal and isothermal annealing of stainless steel 1.4307 samples deformed by compression were investigated using Doppler broadening measurements of the annihilation line. We made an attempt to describe the obtained dependencies in terms of vacancy migration and sinking to the grain boundaries. The model assumed spherical grains with a homogeneous initial distribution of vacancies. The model was capable of following the isochronal annealing data quite accurately. However, the obtained activation energy of vacancy migration equal to 0.44 plus or minus 0.05 eV seemed too low. The isothermal annealing dependency was reproduced less precisely. The reason for this may be the presence of the alfa'-martensite particles in the samples, which can introduce additional defects seen by positrons in the temperature range in which the martensite reversion takes place.
Źródło:
Nukleonika; 2013, 58, 1; 215-219
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydrolytic Degradation of Poly(L-Lactide-co-Glycolide) Studied by Positron Annihilation Lifetime Spectroscopy and Other Techniques
Autorzy:
Pamuła, E.
Dryzek, E.
Dobrzyński, P.
Powiązania:
https://bibliotekanauki.pl/articles/2047148.pdf
Data publikacji:
2006-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
82.35.-x
82.35.Lr
78.70.Bj
61.18.Fs
82.56.Ub
83.85.Jn
68.37.Ps
Opis:
Changes of the poly(L-lactide-co-glycolide) structure as a function of degradation time in phosphate-buffered saline for 7 weeks were investigated by gel permeation chromatography, differential scanning calorimetry, nuclear magnetic resonance ($\text{}^{1}$H NMR), and positron annihilation lifetime spectroscopy. Surface properties as wettability by sessile drop and topography by atomic force microscopy were also characterized. Chain-scission of polyester bonds in hydrolysis reaction causes a quite uniform decrease in molecular weight, and finally results in an increase in semicrystallinity. Molecular composition of the copolymer and water contact angle do not change considerably during degradation time. Atomic force microscopy studies suggest that the copolymer degrades by "in bulk" mechanism. The average size of the molecular-level free volume holes declines considerably after one week of degradation and remains constant till the sixth week of degradation. The free volume fraction decreases as a function of degradation time.
Źródło:
Acta Physica Polonica A; 2006, 110, 5; 631-640
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Free-Volume and Tensile Properties of Glass Fibre Reinforced Polyamide 6 Composites
Autorzy:
Dryzek, E.
Wróbel, M.
Juszyńska-Gałązka, E.
Powiązania:
https://bibliotekanauki.pl/articles/1033894.pdf
Data publikacji:
2017-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
61.41.+e
Opis:
The tensile properties and free volume of commercially available modified polyamid 6 and polyamid 6 composites with 15 and 30 wt% of glass fibre were the subject of the studies. The tensile test allowed us to obtain the stress-strain curves and determine the tensile properties of the polyamid 6 samples. The positron lifetime measurements were performed for the samples before the test and for the samples in the vicinity of the break after they failed. The composites exhibited slightly lower values of the ortho-positronium lifetime and therefore smaller size of the local free volumes in comparison to polyamid 6 without reinforcement. The analysis of the positron lifetime spectra indicated size distribution of the free volume. The initially narrower distributions for the composite samples became broader as a result of the deformation. The deformation caused also increase of the ortho-positronium intensity in the obtained positron lifetime spectra.
Źródło:
Acta Physica Polonica A; 2017, 132, 5; 1501-1505
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Positron annihilation in bioactive glass/poly(glycolide-co-L-lactide) composites
Autorzy:
Dryzek, E.
Cholewa-Kowalska, K.
Pamuła, E.
Powiązania:
https://bibliotekanauki.pl/articles/146311.pdf
Data publikacji:
2010
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
poly(glycolide-co-L-lactide)
bioglass
composites
positron annihilation
Opis:
Composites made of bioactive glasses and resorbable polymers are promising biomaterials for bone tissue regeneration. In this study several types of composites produced from bioactive glasses, differing in chemical composition (A2 and S2) and poly(glycolide-co-lactide) (PGLA) were obtained. The resulting composite materials were investigated with positron lifetime spectroscopy and Doppler broadening of annihilation line. It was found that for the composites made of S2 bioglass the intensity of the third positron lifetime component coming from the positronium (Ps) annihilation decreased with increasing in volume fraction of bioglass particles exhibiting behaviour characteristic of microcomposites. For the composites produced from A2 bioglass, such a dependence was not found. The differences obtained may be connected with chemical composition of the bioglass and/or its crystallinity.
Źródło:
Nukleonika; 2010, 55, 1; 79-83
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preferential Positron Annihilation in Binary Alloys
Autorzy:
Kuriplach, J.
Dryzek, E.
Dryzek, J.
Šob, M.
Powiązania:
https://bibliotekanauki.pl/articles/2008109.pdf
Data publikacji:
1999-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
71.60.+z
Opis:
The effect of preferential positron annihilation at individual constituent atoms in binary alloys is examined theoretically and experimentally. In particular, the results of recently studied alloys Fe-Al and Mg-Cd together with new preliminary results for the Sn-In system are discussed and summarised. In the case of the Sn-In system, the concentration dependencies of positron annihilation rates and Doppler broadening spectra are analysed.
Źródło:
Acta Physica Polonica A; 1999, 95, 4; 605-611
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Estimate of the Crystallite Size for Nanocrystalline AISI 316L Stainless Steel and Armco Iron Processed by Hydrostatic Extrusion Using Variable Energy Positron Beam
Autorzy:
Sarnek, M.
Dryzek, E.
Horodek, P.
Pachla, W.
Powiązania:
https://bibliotekanauki.pl/articles/1033950.pdf
Data publikacji:
2017-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
stainless steel
Armco iron
plastic deformation
hydrostatic extrusion
variable energy positron beam
X-ray diffraction
Opis:
The paper presents the results of research of nanocrystalline AISI 316L type stainless steel and nanocrystalline Armco pure iron processed by severe plastic deformation using hydrostatic extrusion method. Surface and subsurface of the steel samples extruded at different pressure were investigated using variable energy positron beam. It enabled us to determine the positron diffusion length and compare its values with those for annealed AISI 304 stainless steel. Furthermore positron lifetime and microhardness were measured for all the samples and X-ray diffraction was used to estimate the crystallite size.
Źródło:
Acta Physica Polonica A; 2017, 132, 5; 1598-1601
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-18 z 18

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies