Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "take-off" wg kryterium: Temat


Tytuł:
A conception of vertical take-off air vehicle with self-aligning moving wings
Autorzy:
Lichoń, D.
Powiązania:
https://bibliotekanauki.pl/articles/242818.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
vertical take-off
air vehicle conception
self-aligning wings
flapping wings
Opis:
The possibility of vertical take-off of an aircraft is a valuable feature in air transport. It allows to increase operational characteristics of an air vehicle and requires less field and low cost ground infrastructure. Currently the vertical take-off feature is practically reserved to helicopters and tilt-rotor aircrafts. Both types of air vehicles have their advantages and also have some important limitations. Regarding the helicopters their construction provides natural vertical take-off features and makes them useful in low altitude flight tasks. However the power required for flight and main rotor kinematics results in low cruising speed and short range performance. The tilt-rotor aircraft is an answer which provides good cruise characteristics saving the vertical take-off feature. The construction of tiltrotor aircraft consists of rotors with adjustable position of tip-path plane. The main technical problem of tilt-rotors is necessity of change aerodynamic configuration from vertical mode to cruise mode at low flight altitude and very low flight speed. A proposed conception of a vertical take-off air vehicle using self-aligning moving wings is focused on producing aerodynamic force always on wings without participation of rotors or propellers. The self-aligning or semirotating wing movement enables to produce aerodynamic force in each flight speed. During take-off lift force is generated by means of power unit driving the wings. The transition from hovering to progressive flight is a smooth phase without aerodynamic configuration changes. It occur as a result of change in wing kinematics or gravity center position. As the flight speed increases the lift force is generated like in classic airplane wing and the power unit load decreases. The conception of presented air vehicle assume to join best features of airplanes and helicopters i.e. vertical take-off, good flight performances and lack of strict border between both phases of flight.
Źródło:
Journal of KONES; 2014, 21, 4; 311-317
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
ASPECTS OF KOREAN LITERATURE ACCORDING TO THE STAGE OF ECONOMIC GROWTH: FOCUSED ON THE VIEWS OF AMERICA
경제발전 단계에 따른 한국문학의 양상들: 미국에 대한 관점을 중심으로
WYBRANE ASPEKTY LITERATURY KOREAŃSKIEJ W ŚWIETLE ETAPÓW WZROSTU GOSPODARCZEGO: NA PRZYKŁADZIE AMERYKI
Autorzy:
KIM, Mansu
Powiązania:
https://bibliotekanauki.pl/articles/1040256.pdf
Data publikacji:
2016-11-29
Wydawca:
Uniwersytet im. Adama Mickiewicza w Poznaniu
Tematy:
etapy rozwoju ekonomicznego
Rostow
start
nacjonalizm
era zaawansowanej konsumpcji masowej
europejski sen
stage of economic growth
take-off
nationalism
age of high mass consumption
European dream
Opis:
The main topic of this paper is how the economic growth has changed the aspect of Korean novel in the viewpoints of the theory of W. W. Rostow. But the additional topic is Korean's viewpoint on American which had been reflected in Korean novels. Korea has made a long relationship to the United States since 1882. Korea have kept friendly and cooperative relationship to American. But sometimes the relationship was changed rapidly to the opponent or critical attitudes. It should be the universal phenomenon that the people of weak nations begin to have strong nationalistic feelings with the pace of economic growth and gather to show a strong enmity against the strong nation especially against the United States. According to this universal patterns, Korean admired American at first. But after rising to the stage of ‘take-off’, they began to turn to the opponent and critical attitudes. Finally at the age of high mass consumption, they will not compare to America any more because they belong to the similar economic situation. The economy of Japan, Korea and China rose up to higher level at the rapid speed. But the strong nationalistic feelings remained incessantly among their nations. The “European Dream” is one of the attitudes in which individuals find security not through individual accumulation of wealth, but through connectivity and respect for other nations. Our neighbouring countries and Korea must learn the attitudes of European Dream and try to establish this system in East Asia.
Artykuł ma na celu przeanalizowanie wpływu wzrostu gospodarczego na ewolucję powieści koreańskiej w świetle teorii W. W. Rostowa. Koncentruje się na wizerunku Ameryki ukazanej oczami Koreańczyków. Początki stosunków Korei Południowej z USA datowane są na 1882 rok. W większości przypadków stosunki te były przyjacielskie, jednakże odnotowywano także podejścia krytyczne i mniej przychylne. Jest to typowe dla poszczególnych stadiów rozwoju gospodarczego. Obywatele państw słabszych gospodarczo często przejawiają silne postawy nacjonalistyczne w stosunku do krajów silniejszych, takich jak USA. Podobnie było z Koreą. Początkowo Koreańczycy podziwiali USA, ale z czasem zaczęli widzieć wady amerykańskiego modelu, co przełożyło się na coraz mniejsze i rzadsze porównywanie się do społeczeństwa amerykańskiego w obecnych czasach masowej komunikacji i społeczeństwa konsumpcyjnego. Jest to spowodowane upodobnieniem się sytuacji ekonomicznej w obu krajach. Mimo, że gospodarki Japonii, Korei i Chin szybko się rozwinęły, postawy krytyczne nie zanikły. Rozwiązaniem jest tzw. europejski sen, czyli postawa, w której jednostki znajdują poczucie bezpieczeństwa nie w gromadzeniu dóbr materialnych, lecz w budowaniu poczucia więzi i szacunku dla innych narodów. Autor postuluje, by w Azji nauczać podejścia tzw. europejskiego snu w stosunku do sąsiadujących państw.
본고는 경제발전 단계에 대한 로스토우의 관점을 통해 경제발전이 어떻게 한국소설의 변화와 연결되는지 고찰하고자 한다. 본고는 논의의 집중을 위하여 미국에 대한 한국인의 태도 변화를 중심으로 다루었다. 한국은 1982년 한미수교 이후 130여년간 미국과 직접, 간접적인 관계를 맺어왔다. 이러한 긴 역사 속에서 한국은 미국에 대해 대부분 우호적, 협조적인 자세를 보이지만, 어떤 역사적 상황에서는 대립적, 비판적 태도를 보이기도 했다. 특히 민족주의적 감정이 고조되는 시점에서는 미국에 대해 비판적인 관점을 유지하는데, 이러한 태도는 사실 한국에만 국한된 것이 아니라 경제발전 단계에서 겪는 보편적인 경험이라고 볼 수도 있다. 초기의 한국은 미국에 대해 선망의 시선을 보이지만, 민족주의가 고조되는 ‘도약’의 단계에서는 미국에 대해 경쟁적, 비판적 관점을 보이기도 하며, 대량소비사회로 진입하는 1990년 이후에는 미국에 대한 특정한 시각보다는 자본주의 일반에 대한 비판으로 변화되는 양상을 확인할 수 있다. 일본, 한국, 중국은 이웃나라이면서 급속하게 민족주의 단계에서 대량소비사회로 넘어가는 길목에 놓여 있는 나라들이다. 본고에서는 이들이 편협한 민족주의 감정에서 벗어나는 길이 평화와 공존을 제시하고자 하는 유러피언 드림을 아시아에서 실천하는 길이라는 관점을 제시했다.
Źródło:
International Journal of Korean Humanities and Social Sciences; 2016, 2; 11-24
2449-7444
Pojawia się w:
International Journal of Korean Humanities and Social Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Certification of Unmanned Aircraft (UA)
Autorzy:
Pettke, G.
Kozyro, W.
Gałka, P.
Trzeciak, G.
Wołejsza, P.
Powiązania:
https://bibliotekanauki.pl/articles/1841555.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
unmanned vehicles
Polish Register of Shipping
PRS
Unmanned Aircraft
unmanned aerial vehicle
remotely piloted aircraft systems
ground control station
object’s recognition and classification awareness
vertical take-off and landing
Opis:
PRS (Polish Register of Shipping) is an expert institution acting on the international market, that - by conducting business for the benefit of the community - through the formulation of the requirements, survey and issue of the appropriate documents, assists State Administrations, Underwriters and customers in ensuring the safety of people, floating objects, land undertakings, carried cargo and the natural environment. PRS is a body accredited for certification of management systems, as well as a notified body in the European Commission for conducting product conformity assessment procedures with EU directives and regulations, and certify of personnel and processes. Subject and scope of the Publication The Publication defines requirements and procedures of conformity assessment process of Unmanned Aircraft (UA) and the technical possibilities of their use in the maritime economy segment. Purpose of the publication: Defining technical and formal requirements for design, construction and operation of the Unmanned Aircraft (UA), Determining the scope and methodology of conformity assessment process of Unmanned Aircraft (UA), Determining the technical possibilities of using Unmanned Aircraft (UA) in the maritime economy segment. The publication includes the following issues: basic principles and design requirements as well as technical regulations that ensure the design of the Unmanned Aircraft (UA), as a safe product in operation; the scope and methodology of conformity assessment of Unmanned Aircraft (UA); principles and scope of technical supervision over the Unmanned Aircraft (UA), requirements set by PRS in using Unmanned Aircraft (UA) on sea-going ships. The conclusions of the paper: indication of the way to obtain BSP certification, the basis for launching the procedure for developing the NO defence standard for the certification of ships and naval auxiliary units for cooperation with Unmanned Aircraft (UA).
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2021, 15, 1; 143-155
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computer control and measuring system of HWZ-3 engine dynamometer
Komputerowy system kontrolno-pomiarowy hamowni silnikowej HWZ-3
Autorzy:
Łukomski, M.
Koszela, K.
Przybył, K.
Mueller, W.
Powiązania:
https://bibliotekanauki.pl/articles/337176.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
engine dynamometer HWZ-3
modernization
power take-off dynamometer
external characteristics
wheeled tractor engine
built-in systems
Arduino platform
modernizacja
hamownia silnikowa HWZ-3
hamownia wału odbioru mocy
charakterystyka zewnętrzna
silnik ciągnika kołowego
systemy wbudowane
platforma Arduino
Opis:
This article presents a project that contributed to the computerization of the obsolete measurement and control cabinet SPS1, which is part of a test stand designed to determine the parameters of the engine in wheeled tractors. The test stand is located in the Department of Energy Systems Engineering at the University of Life Sciences in Poznań. Arduino platform was used as a built-in system, which enabled the exchange of information between the computer and the measurement and control cabinet along with the readout of analogue meter readings and the control of the engine dynamometer brake load. In order to clearly display measured parameters, proprietary applications were developed in the .NET environment, which in real time presents the results and graphs the speed characteristics of the engine. The implementation was carried out without violating the design of the test station.
Niniejszy artykuł przedstawia projekt, który przyczynił się do skomputeryzowania przestarzałej szafy pomiarowo-sterującej SPS-1, wchodzącej w skład stanowiska badawczego przeznaczonego do wyznaczania parametrów silnika w ciągnikach kołowych. Stanowisko badawcze znajduje się w Zakładzie Inżynierii Systemów Energetycznych Uniwersytetu Przyrodniczego w Poznaniu. Jako system wbudowany wykorzystano platformę Arduino, która umożliwiła wymianę informacji pomiędzy komputerem a szafą pomiarowo-sterującą wraz z odczytem wskazań analogowych mierników i sterowaniem obciążeniem hamulca hamowni silnikowej. W celu przejrzystego zobrazowania mierzonych parametrów opracowano autorską aplikację w środowisku .NET, która w czasie rzeczywistym prezentuje wyniki oraz wykreśla charakterystykę prędkościową silnika. Implementacja została przeprowadzona bez naruszania konstrukcji stacji badawczej.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2018, 63, 4; 114-116
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Different defuzzification methods in Guimbal Cabri G2 helicopter takeoff possibility evaluation
Autorzy:
Mendrek, M.
Grzesik, N.
Krzyżak, A.
Kuźma, K.
Powiązania:
https://bibliotekanauki.pl/articles/374121.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
fuzzy logic
fuzzy expert system
helicopter take off
logika rozmyta
regułowe systemy ekspertowe
start helikoptera
Opis:
The article discusses the aerodynamic properties of the Guimbal Cabri G2 helicopter. The main considerations concern the helicopters ascending to the altitude under initial conditions, which were assumed in the project and how the change of the defuzzification method affects the work of the fuzzy controller. The authors analyzed the following: the aircraft, the crew and the payload. The authors assessed the altitude and the minimum time of the helicopter climb. In designing and the work simulation process, the authors used Matlab and Simulink software. A comparison of the influence of selected defuzzification methods on the work of the fuzzy controller was made.
Źródło:
Transport Problems; 2018, 13, 2; 27-38
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic load indicators for take-off–landing sequence in blocks and attacks of elite female volleyball players
Autorzy:
Kabaciński, J.
Dworak, L. B.
Murawa, M.
Rzepnicka, A.
Powiązania:
https://bibliotekanauki.pl/articles/307295.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
siła reakcji podłoża
obciążenie dynamiczne
start
atak
biomechanika
ground reaction forces
take-off–landing
dynamic loads
blocks
attacks
volleyball
biomechanics
Opis:
Purpose: Dynamic loads during landings determined by the ground reaction forces (GRFs) may elaborate internal loads and increase the risk of overload knee injuries as a result of performing volleyball jumps many times. The study dealt with a biomechanical assessment of dynamic load indicators in female volleyball players for the motion sequence of take-off–landing in blocks and attacks. Methods: Twelve professional female volleyball players participated in the study. Blocks and attacks were filmed by two cameras. GRFs vs. time graphs were recorded with the use of a force platform. Values of dynamic load indicators in terms of the relations of peak of vertical component of GRF, build-up index of this force (BIF), and power output (P) during landing to the vGRF, BIF and P during take-off (L/T) were calculated. Results: The statistically significant ( p < 0.05) highest values of L/T indicators were found for back row attack spikes: 2.4 (vGRF), 12.2 (BIF) and 3.1 (P). In the case of blocks, slide attack spikes and attack line spikes, results of these variables were in range: 1.8÷2.1, 5.9÷7.6 and 2.1÷2.9, respectively. Conclusions: The reduction of GRFs during landings contributes to decreasing the level of the load indicators L/T which should minimize the incidence of anterior cruciate ligament and patellar tendon injuries in female volleyball players.
Źródło:
Acta of Bioengineering and Biomechanics; 2016, 18, 1; 41-46
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Environmental threats around airports and possibilities limiting them
Zagrożenia ekologiczne wokół lotnisk i możliwości ich ograniczania
Autorzy:
Głowacki, P.
Szczeciński, S.
Powiązania:
https://bibliotekanauki.pl/articles/212476.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
zagrożenie środowiskowe lotniska
mozliwości ograniczania zagrożeń ekologicnych
environmental threats of aviation
ecology
toxins
airport traffic
aircraft take- off
turbofan engine
Opis:
The article has presented some of the most important reasons for and sources of main factors causing interferences with the natural ecosystem within the airport zone- resulting from particularly heavy traffic and from the functioning of various devices on small limited areas of surface and the ground-level layer of the atmosphere. These operations are accompanied by intensive noise and heat emitted in large quantities- which are caused by the work of jet engines of taking off and landing aircraft. The jet engines work contributes to the ‘production’ of not only CO2 and H2O, but also numerous harmful chemical compounds such as CO, HC as well as NOx.
W artykule przedstawiono najważniejsze przyczyny i źródła głównych czynników powodujących zakłócenia „normalnego” systemu ekologicznego w strefie lotnisk–a wynikające ze szczególnie intensywnego ruchu i działania różnych urządzeń na niewielkim obszarze powierzchni ziemi i przyziemnej warstwie atmosfery. Działaniom tym towarzyszą skoncentrowany hałas i wydzielanie ciepła w ogromnych ilościach–których przyczyną jest praca turbinowych silników odrzutowych startujących i lądujących samolotów. Z pracą tych silników wiąże się „produkowanie” nie tylko CO2 i H2O ale także wiele szkodliwych związków chemicznych jak CO, niespalone HC oraz NOx w dużych ilościach.
Źródło:
Prace Instytutu Lotnictwa; 2011, 8 (217); 35-38
0509-6669
2300-5408
Pojawia się w:
Prace Instytutu Lotnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the required ground power of a ground - based system for support of the aircraft safe take - off and landing
Autorzy:
Majka, A.
Powiązania:
https://bibliotekanauki.pl/articles/242165.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
air transport
take-off and landing
magnetic levitation
Opis:
Among the most important problems faced by the air transport today there can be mentioned some negative influences of aircraft and airports on the environment and the increasing costs of air transport. One of the possibilities to improve the situation is to work out innovative solutions aimed at decreasing of the aircraft pollution and improving the transport effectiveness. Among the most innovative ideas is the use of magnetic levitation to aid the take-off and landing of the transport aircraft. The use of the aiding system will bring a lot of benefits, however, regarding its innovative character and the problems connected with it, the idea can have been realized in a couple of years or even decades. The aim of this work was to carry out the analysis of the change to the required thrust of the transport aircraft in the take-off, landing and cruise using the system of magnetic levitation. Magnetic levitation or magnetic suspension is a method by which a body floats due to a special quality of magnets. The generated electromagnetic force is used to balance the weight of the object. The current work describes the ways of determining the weights of the main systems of the aircraft with classical construction solutions where the weight of the whole aircraft is estimated on the basis of the statistical methods. It allows determining the weights of all main systems of the aircraft and verifying the results using the known examples. Thanks to this approach, it could be possible to determine the modified aircraft weight more thoroughly, adding the changes in weights of the modified systems.
Źródło:
Journal of KONES; 2012, 19, 4; 411-418
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of opening time of the take-off pneumatic launcher main valve on take-off pressure losses
Autorzy:
Jastrzębski, G.
Powiązania:
https://bibliotekanauki.pl/articles/243547.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
take-off launcher
pneumatic take-off systems
pressure losses
Opis:
This publication presents UAV rope and pneumatic launchers constructed and operated in the Air Force Institute of Technology. The construction and operating principle were presented, and functional properties of the UAV take-off pneumatic launcher were characterised. Furthermore, a detailed diagram of the take-off pneumatic launcher was shown, and an operating principle of the launcher take-off system and pneumatic control of the take-off procedure were discussed. The operation parameters of the most important operational elements (main ball valve, semi-rotary actuator, pneumatic valves controlling the flow) from the launcher pneumatic system were specified. On the basis of data sheets of pneumatic elements, a calculation model of the mass flow (volumetric flow rate) of compressed air flowing through the main valve (ball valve in the take-off cylinder supply line) of the take-off pneumatic launcher was designed. The possible cracks, through which compressed air leaks and the take-off cylinder dead sections during the main valve opening and shot, were characterised and discussed. The calculation model designed for individual leaks and total compressed air leaks in the take-off line of the pneumatic launcher was presented. Based on the mass flow model (volumetric flow rate) of compressed air flowing through the main valve, and total compressed air leaks, the relationship of compressed air energy losses depending on opening time of the main valve of the take-off pneumatic launcher was determined. In the paper, the results of simulation studies for the times shorter than data sheets of the main valve opening were presented. In addition, the change of the compressed air disposable energy losses was defined. Based on the results of simulation studies, the opening time of the take-off launcher main valve for the acceptable disposable energy loss level of the take-off pneumatic launcher was specified.
Źródło:
Journal of KONES; 2016, 23, 4; 175-182
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Methods for determining the take-off speed of launchers for unmanned aerial vehicles
Autorzy:
Jastrzębski, G.
Ułanowicz, L.
Powiązania:
https://bibliotekanauki.pl/articles/243050.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
aviation
unmanned aerial vehicle
take-off launcher
take-off speed
acceleration recorder
lotnictwo
bezzałogowy statek powietrzny
prędkość startu
rejestrator przyspieszenia
Opis:
Unmanned aerial vehicles (UAV) are currently a very rapidly developing type of aviation. The problem of support during the take-off with the use of, i.e. take-off launchers arose along with their development, especially for UAVs with weights and dimensions preventing manual take-off. One of the major issues associated with UAV take-off launchers is for its UAV accelerating element to obtain its initial speed. The article presents three methods of determining launcher take-off speeds for unmanned aerial vehicles, i.e. the concentrated very oblique projection method, the high-speed camera methods, and the acceleration recorder method. The take-off launcher carriage speed in the oblique projection method is determined from a formula. This method involves “ejections” of concentrated masses from the UAV mass range and measuring the component values resulting from the used formula, which contains the range of the oblique projection, the elevation of the projection and its angle. The method using the high-speed camera involves recording the course of ejections of the concentrated mass from the launcher. The average take-off speed is determined on the basis of a take-off run length (section of the launcher race, where the unit accelerates) and defining the start and end frame of the carriage movement. The third method for the determination of the take-off speed utilizes an acceleration recorder. The method with the recorder involves registering a change in the accelerations when the take-off carriage is being accelerated by a system fixed on the carriage or the accelerated object. The article presents the methodology of dynamic tests of object acceleration on a launcher, necessary for the determination of speed with the mentioned methods. Selected results from actual tests with the use of the 01/WS/2015 launcher, which is an element of the ZOCP JET2 set, were presented. The test results are presented in a tabular form. The methods for the determination of the take-off speed were compared on the basis of performed tests. Based on the obtained results, the factors impacting the accuracy of each of the methods were identified.
Źródło:
Journal of KONES; 2018, 25, 1; 170-176
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Methods of mathematical modeling of the take-off operation of a commercial aircraft
Metody modelowania matematycznego operacji startu samolotu komunikacyjnego
Autorzy:
Beuth-Jakubowska, K.
Stelmach, A.
Powiązania:
https://bibliotekanauki.pl/articles/374295.pdf
Data publikacji:
2011
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
modelowanie
lotnisko
samolot komunikacyjny
take-off operation
modeling
airport
aircraft communications
Opis:
While observing the dynamic increase in the intensity of air traffic, the issue of constant controlling and monitoring every individual operation carried out during the flight process becomes a vital matter. One of the most significant operations in this process is the aircraft’s take-off procedure. On the airports such procedures are observed quite frequently, with a rate of several dozen seconds up to few minutes. The correctness of carrying out the mentioned guidelines has a crucial impact on the traffic capacity of the runway, number of operations completed within the area of the airport and, above all, safety of passengers. The research and analysis of these processes cannot, for obvious reasons, be done on objects in real conditions. Therefore, there is a tendency to use IT tools and methods for the purpose of the analysis of the operations which occur in the area of the airport. In order to make use of the computer simulation it is essential to have mathematical models of these operations. The purpose of this article is to create models for particular stages of take-off operation and to identify elementary models of these stages based on parameters recorded by the on board flight recorder. The created mathematical and computer models (for simulation research), reproducing the aircraft’s real operations in the area of the airport, shall be used for automation of the operations conducted in the airport’s area. For the purpose of the analysis comparison of two models has been done to show the effects of conducting mathematical normalization of parameters prior to the analysis.
Obserwując dynamiczny wzrost ruchu lotniczego istotnym staje się zagadnienie ciągłej kontroli i monitorowania poszczególnych operacji wykonywanych podczas procesu przelotu. Jedną z ważniejszych operacji w tym procesie jest operacja startu samolotu. Na lotniskach komunikacyjnych operacje te odbywają się z częstotliwością od kilkudziesięciu sekund do kilku minut. Poprawność wykonywania tych założonych procedur w czasie tej operacji ma istotny wpływ na przepustowość drogi startowej, liczbę operacji wykonywanych w rejonie lotniska a przede wszystkim na bezpieczeństwo pasażerów. Badanie i analiza tych procesów z przyczyn oczywistych nie mogą być wykonywane na obiektach w rzeczywistych warunkach. W związku z tym dąży się do wykorzystania w analizie operacji zachodzących w rejonie lotniska narzędzi i metod komputerowych. Aby wykorzystać możliwości symulacji komputerowej koniecznym jest posiadanie modeli matematycznych tych operacji. Celem artykułu jest zamodelowanie poszczególnych etapów operacji startu a następnie identyfikacja elementarnych modeli tych etapów w oparciu o parametry zarejestrowane przez pokładowy rejestrator parametrów lotu samolotu. Zbudowane modele odwzorowujące rzeczywiste operacje samolotu w rejonie lotniska, będą mógłby być wykorzystane w praktyce lotniczej.
Źródło:
Transport Problems; 2011, 6, 4; 47-59
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Minimum emission unconventional MAGLEV assisted take-off
Autorzy:
Majka, A.
Powiązania:
https://bibliotekanauki.pl/articles/246124.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
air transport
green trajectory
take-off
aircraft emission
magnetic levitation
Opis:
Among the most important problems faced by the air transport today there can be mentioned some negative influences of aircraft and airports on the environment and the increasing costs of air transport. One of the possibilities to improve the situation is to work out innovative solutions aimed at decreasing of the aircraft pollution and improving the transport effectiveness. Among the most innovative ideas is the use of magnetic levitation (MAGLEV) to aid the take-off and landing of the transport aircraft. The “Integrated Ground and on-Board system for Support of the Aircraft Safe Take-off and Landing” – GABRIEL, deals with radically new integration of the MAGLEV technology into the air transportation system that contains aircraft, airport, air traffic control, authority, logistic and operational support, maintenance, etc. GABRIEL idea includes operation of the aircraft without the conventional undercarriage system and using the ground based power and supporting systems for take-offs and landings. In case of using the GABRIEL system as a catapult, the aircraft on the track must be accelerated to the speed permitting to reach the altitude of 300 m or more. Such take-off and climb results in minimum noise and minimal emission of substances harmful for the environment. After reaching the altitude of 300 m, the aircraft may follow its flight with using different flight strategies. Different conditions of the unconventional take-off needs to shape other way the trajectory of the initial stage of the aircraft flight after the lift-off. The aim of the present work was to determine the optimal conditions of the lift-off and the optimal trajectory of the initial climb minimizing the emission. Simplified realization of the Ritz- Galerkin method was used in this work, which uses an approximate solution to boundary value problems for determining the optimal flight trajectory.
Źródło:
Journal of KONES; 2014, 21, 4; 335-342
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
National policy and big-push theory of development in Nigeria: moving away from low-level economic equilibrium
Autorzy:
Umoru, D.
Onimavo, J. A.
Powiązania:
https://bibliotekanauki.pl/articles/321703.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
development
infrastructure
Nigeria
big-push
take-off
rozwój
infrastruktura
Opis:
The paper analyzes the policy implications of the big-push model for development in Nigeria. The highlights of the analysis include existence of three inter-related perceptions namely, poverty trap, big push (BP) and takeoff. The basic idea is that poor countries are in poverty, hence needs BP linking amplified investment, leading to takeoff in national income and development. This indeed rationalizes necessity for overseas aid. In effect, minimum infrastructure and educational resources be apportioned to development programme to achieve success. However, nations that have implemented coordinated investment programs can achieve industrialization of each sector and thus be able push forward sequence of development.
Źródło:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska; 2018, 116; 177-187
1641-3466
Pojawia się w:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nonlinear PTO effect on performance of vertical axisymmetric wave energy converter using semi-analytical method
Autorzy:
Liu, M.
Liu, H.
Zheng, X.
Chen, H.
Wang, L.
Zhang, L.
Powiązania:
https://bibliotekanauki.pl/articles/258878.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
wave energy converter (WEC)
power take-off (PTO)
capture width ratios
analytical method
eigen function
Opis:
The wave energy, as a clean and non-pollution renewable energy sources, has become a hot research topic at home and abroad and is likely to become a new industry in the future. In this article, to effectively extract and maximize the energy from ocean waves, a vertical axisymmetric wave energy converter (WEC) was presented according to investigating of the advantages and disadvantages of the current WEC. The linear and quadratic equations in frequency-domain for the reactive controlled single-point converter property under regular waves condition are proposed for an efficient power take-off (PTO). A method of damping coefficients, theoretical added mass and exciting force are calculated with the analytical method which is in use of the series expansion of eigen functions. The loads of optimal reactive and resistive, the amplitudes of corresponding oscillation, and the width ratios of energy capture are determined approximately and discussed in numerical results.
Źródło:
Polish Maritime Research; 2017, S 3; 49-57
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimal configurations of wave energy converter arrays with a floating body
Autorzy:
Zhang, W.
Liu, H.
Zhang, X.
Zhang, L.
Ashraf, M. A.
Powiązania:
https://bibliotekanauki.pl/articles/260084.pdf
Data publikacji:
2016
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
wave energy
cylinder array
power take-off
hydrodynamic analysis
Opis:
An array of floating point-absorbing wave energy converters (WECs) is usually employed for extracting efficiently ocean wave energy. For deep water environment, it is more feasible and convenient to connect the absorbers array with a floating body, such as a semi-submersible bottom-moored disk, whose function is to act as the virtual seabed. In the present work, an array of identical floating symmetrically distributed cylinders in a coaxial moored disk as a wave energy device is proposed The power take-off (PTO) system in the wave energy device is assumed to be composed of a linear/nonlinear damper activated by the buoys heaving motion. Hydrodynamic analysis of the examined floating system is implemented in frequency domain. Hydrodynamic interferences between the oscillating bodies are accounted for in the corresponding coupled equations. The array layouts under the constraint of the disk, incidence wave directions, separating distance between the absorbers and the PTO damping are considered to optimize this kind of WECs. Numerical results with regular waves are presented and discussed for the axisymmetric system utilizing heave mode with these interaction factors, in terms of a specific numbers of cylinders and expected power production.
Źródło:
Polish Maritime Research; 2016, S 1; 71-77
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies