Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "slide" wg kryterium: Temat


Tytuł:
The methodology of slide micro-bearings lubrication
Autorzy:
Wierzcholski, K.
Powiązania:
https://bibliotekanauki.pl/articles/245793.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
slide micro-bearings
lubrication
methodology
Opis:
The core of the presented problem is to numerically and experimentally determine, or to indicate, the values of the optimum pressure and liquid velocity values appearing near the cells, of micro-bearing cooperating surfaces, and to find ways of controlling the friction forces between particles of the liquid and the cell of the micro-bearing cooperating bodies in the thin boundary layer. Investigations of the physical and strength features are expected to be performed for various hinds of micro-bearing superficial layer and for efficient and damages micro-bearings. In order to begin treating the surface structure of a superficial layer on the cooperating micro-bearing surfaces it is absolutely necessary to have at one's disposal the proper model of a liquid flow in the thin layer, and to obtain the proper values of friction forces. During presented research are realized the following tasks: 1.  The methodology of analytical and numerical efforts to obtain characteristics on the micro- and nano- level of pressure, liquid velocity and friction forces, 2.          The methodology of experimental efforts on the nano- level to measure thin layer lubricant properties between cooperating micro-bearing surfaces. 3.          The methodology of experimental research on the micro- and macro -level to measure cooperating surfaces in micro-bearing
Źródło:
Journal of KONES; 2009, 16, 3; 483-488
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Teoretyczny model panewki poprzecznego łożyska ślizgowego : wpływ wartości parametru zużycia na temperaturę łożyska
A theoretical model of the transverse acetabular bearing influence wear value parameter on the bearing temperature
Autorzy:
Płuciennik, P.
Maciejczyk, A.
Powiązania:
https://bibliotekanauki.pl/articles/315250.pdf
Data publikacji:
2016
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
łożysko ślizgowe
poprzeczne łożysko ślizgowe
temperatura
panewka
zużycie panewki
slide bearing
slide journal bearing
temperature
acetabulum
wear
Opis:
Artykuł stanowi kontynuację prac teoretycznych, mających na celu analizę zjawisk zachodzących podczas pracy panewki łożyska ślizgowego, zwłaszcza w zakresie zużywania się jej powierzchni. Poznanie wpływu tych zjawisk stanowi niezwykle istotne zagadnienie w zakresie eksploatacji maszyn i urządzeń. W niniejszej pracy przedstawiono założenia i model poprzecznego łożyska ślizgowego. Do wyznaczenia charakterystyk posłużono się równaniem grubości filmu olejowego. W celu określenia wpływu wartości parametru zużycia na temperaturę łożyska, niezbędne obliczenia wykonano w oparciu o opracowaną symulację numeryczną. Wyniki badań wpływu zmiany parametru zużycia na temperaturę łożyska w funkcji zmiennej wartości mimośrodowości względnej λ dla określonych wartości luzu względnego ψ, zaprezentowano w formie wykresów.
The article is a continuation of theoretical work, in order to analyze the phenomena occurring during operation of the acetabular bearing, particularly in terms of wear of its surface. The research is very important problem during operating machines and plants. In this paper, shows assumptions and the model of the acetabular bearing. To determine the characteristics was used the equation of oil film thickness. In order to determine the effect of wear parameter values on bearing temperature, the necessary calculations were performed based on the developed numerical simulation. The results of studies on the effects of wear parameter changes on temperature of the bearing as a function of the value of a variable relative eccentricity for certain values of the relative clearance, presented in the form of graphs.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2016, 17, 12; 1316-1319
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The preliminary research of the influence of grease microcontainers made on the surface of the slide association on the vibration signal recorded for this association
Autorzy:
Boruta, G.
Napadłek, W.
Powiązania:
https://bibliotekanauki.pl/articles/243691.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
vibration
slide association
friction
wear
grease microcontainers
Opis:
There is shown the construction of an elaborated test stand for the test research of sliding friction associations. The following properties of tested friction associations are described: type (chemical composition) and hardening of applied materials, as well as the results of the analysis of topography of their collaborating surfaces (base material and then after creating grease microcontainers in it). The methodology and the range of performed researches are described. The researches were conducted using the accelerometer A0760GP and the industrial measurement device Emerson CSI 2130. On the basis of recorded vibration signals, their amplitude spectra were determined. These spectra were being compared and analysed in reference to the possibilities of application of measurements of vibration signals to indication of the process of association wear. It was found that the process of wear of the tested sliding association without lubrication from grease microcontainers is visible as the change of form of vibration signals recorded for this association as even over-a-dozen-fold changes in the value of amplitudes of some special harmonic components of those signals, especially high-frequency components within the analysed range of frequencies. It was also found that the application of the grease microcontainers on the surface on which rollers slide (not roll) allowed to acquire a significant reduction of the process of wear of the tested slide association, showed by the slower pace of growth of the value of all harmonic components, especially high-frequency components within the analysed range of frequencies. At the end there were provided directions of further researches.
Źródło:
Journal of KONES; 2018, 25, 2; 59-67
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The analysis of friction in the bearing of rocker arms
Autorzy:
Kubiak, P.
Siczek, K.
Powiązania:
https://bibliotekanauki.pl/articles/244722.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
rocker arm
slide bearing
combustion engine
friction
Opis:
Rocker arms are important parts in many valve train systems of combustion engines. They are responsible for translating the profile of the camshaft into motion for opening and closing the inlet and outlet valves. The design, materials and lash adjuster elements for existing rocker arms were discussed. The modified rocker arm bearing was designed for the investigated Benzer 50cc four-stroke engine. The modification for the analysed engine includes the change of bearing for both inlet and outlet rocker arms. The original rocker arm bearing is of the slide type and mates with the axis fixed via the pin to the cylinder head. The modified bearing can be of the needle roller or the slide type and include two bearings mating with the axis, to which the rocker arm is fixed. The aim of the presented study was to obtain the courses of pressure in cylinder against the crankshaft angle, which was needed to calculate the loading force of rocker arm bearing and then friction torque therein. The models of valve train assembly and of the bearing operating under boundary friction were elaborated. Resulted values of the friction torque in rocker arm bearing for different operating conditions of engine were presented in the paper.
Źródło:
Journal of KONES; 2016, 23, 2; 231-238
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The analysis of oil balance in crank bearing
Analiza bilansu oleju w lozysku korbowym
Autorzy:
Kyureghyan, K.
Piekarski, W.
Powiązania:
https://bibliotekanauki.pl/articles/792740.pdf
Data publikacji:
2012
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
hydrodynamic lubrication
cross slide bearing
Reynolds equation
crank bearing
oil balance
slide bearing
technical condition
engine
analysis
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 2
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Distributions of hydrodynamic pressure in the gap of slide journal bearing lubricated with ferro-oil
Autorzy:
Frycz, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/247084.pdf
Data publikacji:
2019
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
temperature distribution
journal slide bearing
ferro-oil
Opis:
This research work is part of a broader comprehensive issue, which is the analysis of flow and operating parameters of journal slide bearings lubricated with ferro-oil. In this article, the author presents only the main assumptions and essential transformations of the analytical and numerical model for determining the pressure distributions in the gap of a slide journal bearing lubricated with ferro-oil. It is cardinal that the rheological and magnetic values of ferro-oil parameters adopted in numerical calculations are based on the results of actual values obtained in the author’s earlier research work. There are presented the pressure distributions by abovementioned method in the article for cases of bearings lubricated with ferro-oils with different concentration of magnetic particles. The obtained results are shown in the form of a set of four complementary characteristics of the dimensionless pressure distributions. First and main of them are the calculations for classical Newtonian lubrication but they take into account the influence of the magnetic field on the distributions. The next of the presented characteristics are so-called "corrections" of pressure distribution values, taking into account as follows: effects of changes in ferro-oil viscosity related to temperature changes, impacts of ferro-oil viscosity changes related to pressure changes and the effect of non-oil properties of the lubricant. The article includes a qualitative and quantitative analysis of the obtained results as well as observations and conclusions are presented in it.
Źródło:
Journal of KONES; 2019, 26, 4; 53-61
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Enhancement of memory capacity in HDD micro- bearing
Autorzy:
Wierzcholski, K.
Powiązania:
https://bibliotekanauki.pl/articles/243528.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
HDD slide micro- bearings
hyperbolic journal shapes
Opis:
The aim of the presented paper is presenting the shapes of HDD micro-bearing journal, which have influence on the enhancement of memory capacity. Moreover the asymmetrically grooved lateral surfaces of journal bearings generate the asymmetric pressure distribution, which leads to concentric rotation and eccentricity of a rotor. Most of the stiffness coefficient due to asymmetric grooves and hyperbolic shapes of lateral journal surfaces are bigger than those of the conventional cylindrical micro-bearings without grooves. The damping coefficients and friction torque due to asymmetric grooves and hyperbolic shapes of lateral journal surfaces are slightly bigger than those of the conventional cylindrical micro-bearings without grooves. The asymmetric grooves of hyperbolic micro journal bearings may have advantages in terms of small whirls radius and large dynamic coefficients occurring during the bearing exploitation. The idea of seeking of the slide micro-bearings with optimum of the capacity memory was implied from the author's investigation of human joints, which fulfil the role of intelligent bio-bearings. This paper investigates the dynamic behaviour of HDD micro-bearings with hyperbolic journal lateral shapes, by solving the proper Reynolds equation and the equation of a motion of a HDD spindle system. This paper presents the friction forces calculation in hydrodynamic HDD micro bearing lubrication with hyperbolic shapes of journals.
Źródło:
Journal of KONES; 2008, 15, 3; 555-560
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of acustic emission for detection of fatigue microdemage in main and crank bearings for diesel engines
Autorzy:
Girtler, J.
Powiązania:
https://bibliotekanauki.pl/articles/2073652.pdf
Data publikacji:
2015
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
frequency analysis
slide bearing
friction factor
bearing bush
Opis:
The article presents reasons for applying the acoustic emission (AE) to detect fatigue microdamage in main bearings and crank bearings of marine main engines. Problem of determination of fatigue life for slide bearing bushes was characterized in general. There were demonstrated properties of the objects of research, which were bushings made of the MB58 alloy, as well as an overall description of the research. It was shown that the frequency bands of AE signals can indicate fatigue damage to the sliding layer of a bearing bush. The fatigue damage in the tested bushes was depicted in figures. General features of the AMSY-6 measuring system, used in the research, were also provided herein.
Źródło:
Journal of Polish CIMEEAC; 2015, 10, 1; 63--74
1231-3998
Pojawia się w:
Journal of Polish CIMEEAC
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Correlation of risk analysis method results with numerical and limit equilibrium methods in overall slope stability analysis of southern wall of Chadormalu iron open pit mine - Iran
Korelacja wyników analizy ryzyka z wynikami obliczeń numerycznych oraz wynikami uzyskanymi w oparciu o metodę równowagi granicznej zastosowanych do badania stabilności wyrobiska pochyłego na południowej ścianie odkrywkowej kopalni rud żelaza w Chadormalu w Iranie
Autorzy:
Ahangari, K.
Paji, A. G.
Behdani, A. S.
Powiązania:
https://bibliotekanauki.pl/articles/219764.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
stabilność wyrobiska pochyłego
ściana południowa kopalni odkrywkowej
FLAC
oprogramowanie SLIDE
ryzyko
slope stability
chadormalu southern wall
SLIDE software
risk
Opis:
Slope stability analysis is one of the most important factors in designing open pit mines. Therefore an optimal slope design that supports both aspects of economy and safety is very significant. There are many different methods in slope stability analysis including empirical, limit equilibrium, block theory, numerical, and probabilistic methods. In this study, to analyze the overall slope stability of southern wall of Chadormalu iron open pit mine three numerical, limit equilibrium and probabilistic methods have been used. Software and methods that is used for analytical investigation in this study are FLAC software for numerical analysis, SLIDE software and circuit failure chart for limit equilibrium analysis and qualitative fault tree and semi-quantitative risk matrix for probabilistic analysis. The results of all above mentioned methods, was a circular failure occurrence in Metasomatite rock zone between 1405 to 1525 m levels. The main factors of failure occurrence in this range were heavily jointing and existing of faults. Safety factors resulted from numerical method; Circular chart method and SLIDE software are 1.16, 1.25 and 1.27 respectively. Regarding instability and safety factors in Metasomatite rock zone, in order to stabilize the given zone, some considerations such as bench angle and height reduction should be planned. In results of risk matrix method this zone was mentioned too as a high risk zone that numerical and limit equilibrium methods confirmed this.
Badanie stabilności wyrobiska pochyłego jest jednym z najważniejszych czynników uwzględnianych przy projektowaniu kopalni odkrywkowych. Optymalne zaprojektowanie wyrobiska pochyłego z uwzględnieniem czynników ekonomicznych oraz bezpieczeństwa jest niezmiernie ważne. Istnieje wiele metod badania stabilności wyrobiska pochyłego, między innymi metody empiryczne, metoda równowagi granicznej, teoria bloków oraz metody numeryczne i probabilistyczne. W pracy tej omówiono zastosowanie trzech spośród tych metod: metody numerycznej, równowagi granicznej oraz metody probabilistycznej, do analizy stabilności wyrobiska pochyłego na południowej ścianie kopalni rud żelaza w Chadormalu w Iranie. Oprogramowanie wykorzystane w badaniach analitycznych to pakiet FLAK przy metodzie numerycznej, oprogramowanie SLIDE oraz wykresy kołowe przy metodzie równowagi granicznej oraz jakościowe drzewa określające występowanie uskoków i pół-jakościowe macierze ryzyka przy metodzie probabilistycznej. Wyniki uzyskane w oparciu o trzy wyżej wymienione metody wykazały wystąpienie zawalenia się skał metasomatycznych na poziomie od 1405 do 1525 m. Głównymi czynnikami warunkującymi zawalenie się skał w tym regionie była obecność licznych pęknięć oraz uskoków. Wskaźniki bezpieczeństwa uzyskane przy pomocy metod numerycznych, wykresu kołowego oraz oprogramowanie SLIDE wyniosły kolejno: 1.16, 1.25, 1.27. W odniesieniu do niestabilności w rejonie skał metasomatycznych, aby uczynić tę strefę bardziej stabilną należy uwzględnić takie czynniki jak kąt nachylenia ławy oraz obniżenie wysokości. Analiza przeprowadzona w oparciu o macierze ryzyka wykazała, że strefa ta jest strefą wysokiego ryzyka, zaś wyniki analizy numerycznej oraz wyników uzyskanych przy pomocy metody równowagi granicznej w pełni ten wniosek potwierdziły.
Źródło:
Archives of Mining Sciences; 2013, 58, 2; 505-519
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of changes in the rotational speed of the shaft journal slide bearing on the acoustic emission signal
Autorzy:
Gesella, G.
Murawski, L.
Powiązania:
https://bibliotekanauki.pl/articles/241564.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
non-destructive testing
diagnostic
acoustic emission
slide bearing
Opis:
The paper presents preliminary studies of a slide bearing operation by using an acoustic emission. These studies were designed to test the usability of this method for the diagnosis and monitoring of bearings in marine drive system (in particular, stern tube bearing). This paper proposes a method of testing the operating status of the slide bearing using acoustic emission. It discusses the research station, where the study was conducted. The authors paid special attention to the impact of rotation speed of the shaft journal bearing sliding to change some parameters of the acoustic emission signal. The gathered results were analysed and it was evaluated how the rotational speed of the shaft journal affects the individual signal parameters of acoustic emission. Additionally, the sensitivity of the method was evaluated. The article describes: the basics of testing with using the acoustic emission, parameters of the acoustic signal (the acoustic emission burst count, arrival time, duration time, signal amplitude, signal energy and RMS) and the equipment necessary for measurements by using this method. This method, unlike the ultrasonic testing detects only the active wave source, and it is very sensitive to detect changes in the moment when the installation is operating under load. It proposes to use the acoustic emission method to study operational conditions of a slide bearing. Slide bearings are used in many constructions of mechanisms, machines and equipment. They are a strategic element of their design and their improper work leads to the machine damage in a very short period of time, which automatically excludes it from further exploitation. For this reason, the correct assessment of the technical condition of slide bearing and knowledge of the current operating conditions of the slide bearing are extremely important (particularly in the case of bearings in marine propulsion system).
Źródło:
Journal of KONES; 2016, 23, 2; 121-128
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Investigations of Motion of Slide of Selected Pistol Types
Autorzy:
Fikus, B.
Koperski, W.
Płatek, P.
Surma, Z.
Trębiński, J.
Powiązania:
https://bibliotekanauki.pl/articles/403494.pdf
Data publikacji:
2016
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
mechanics
pistol slide motion
fast camera measurements
experimental investigations
Opis:
In the presented paper, kinematic characteristics of movable parts of investigated pistols have been experimentally determined with application of high speed camera and appropriate software TEMA motion. Results of measurements can be useful in validation of various theoretical models and can reveal the influence of some technical solutions on parameters of motion of selected parts. Obtained curves presenting dependence of slide velocity versus time, allowed for rough estimation of average value of interaction force between slide and frame of the investigated construction. The results of study highlights advantage of HK USP pistol design. The achieved results are from reduction of the value of the mentioned interaction force (approximately 50%) due to elongation of the most intensive phase of slide motion damping process.
Źródło:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa; 2016, 7, 4 (26); 23-32
2081-5891
Pojawia się w:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Velocity distribution in slide journal bearing gap by laminar unsteady lubrication
Autorzy:
Krasowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/245516.pdf
Data publikacji:
2011
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
laminar unsteady lubrication
journal slide bearing
pressure
velocity perturbation
Opis:
This paper shows results of numerical solutions the modified Reynolds equations for laminar unsteady oil flow in slide journal bearing gap. Laminar unsteady oil flow is performed during periodic and unperiodic perturbations of bearing load or is caused by the changes of gap height in time. Above perturbations occur mostly during the starting and stopping of machine. During modelling crossbar bearing operations in combustion engines, bearing movement perturbations from engine vertical vibrations causes velocity flow perturbations of lubricating oil on the bearing race and on the bearing slider in the circumferential direction. This solution example applies to isothermal bearing model with infinity length. Lubricating oil used in this model has Newtonian properties and constant dynamic viscosity. Perturbations connected with unsteady lubricating oil velocity in the circumferential direction on the slide bearing and on the slider of bearing were taken into consideration. Results are presented in the dimensionless hydrodynamic pressure and velocity distribution diagrams. Received solutions were compared with the solution received by the stationary lubrication flow in the slide journal bearing, which were made with the same parameter assumption by constant dynamic oil viscosity. Isothermal bearing model is similar to friction node model by steady-state heat load conditions.
Źródło:
Journal of KONES; 2011, 18, 3; 177-184
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CFD analysis of influence of axial position of shaft on hydrodynamic lubrication of slide conical bearing
Autorzy:
Czaban, A.
Powiązania:
https://bibliotekanauki.pl/articles/241575.pdf
Data publikacji:
2017
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
hydrodynamic lubrication
conical bearing
slide bearing
radial clearance
CFD
Opis:
During the operation of a slide bearing, the position of its shaft or sleeve varies due to many factors, such as vibrations, load changes, changes in the lubricating viscosity. The vibrations or varying load can cause, that the position of the bearing shaft, measured along its axis of rotation, changes. This is particularly important for sliding bearing with conical geometry. Due to the geometry of this kind of bearing, i.e. where the radius of this bearing (of the shaft and sleeve) has not a constant value, as in the case of a journal bearing, it is more difficult to obtain proper values and describe its hydrodynamic lubrication. This article shows the results of hydrodynamic lubrication of the slide conical bearing, for which the changes in the position of the bearing shaft in the longitudinal direction, i.e. along its axis of rotation, were taken into account. The commercial CFD software, designed for solving general for flow phenomena problems, was used in the simulations. This article shows the results of simulations, assuming that the lubricating oil behaves as a generalized Newtonian fluid. The hydrodynamic pressure distributions, load carrying capacities and friction torques were calculated for the concerned bearing. The aim of this work is to show how the operating parameters of the slide conical bearing can be influenced, by only changes of the position of the shaft along the axis of its rotation.
Źródło:
Journal of KONES; 2017, 24, 3; 37-44
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hints for determination of the reasons of IC engine crank mechanism bearings damage
Autorzy:
Krzymień, A.
Krzymień, P.
Powiązania:
https://bibliotekanauki.pl/articles/244163.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engine
slide bearing
damage
remarks on failure causes
Opis:
In order to reduce the risk of premature wear or sudden failure of slide bearings it is necessary to take the relevant preventive steps. These can be determined on the ground of damage investigation and analysis of their causes. This paper presents some suggestions as to find causes of bearing failure, taking into account operational conditions, loads, applied lubricant and the quality of mating surfaces. A precise recognition of different causes of bearing failures should allow to reduce the hazard of premature wear and to take relevant preventing steps.Remarks on determination of bearing damage presented above and examples of damage presented in references try to show both to user and manufacturer their possible causes. If frequency of definite failure is occasional, most probably it results from unsuitable conditions of bearing operation (e.g. contaminated lubricating oil, oil film rupture, high temperature) or improper assembly (e.g. unsuitable bolt tightness, erroneous bearing clearance) of a certain engine. If damage concerns an entire engine family, one common cause should be defined. A precise recognition of damage various causes allow to diminish the hazard of premature wear by taking the appropriate preventing steps. Because of that very careful examination of the nature and distribution of any damage traces is recommended. Most often the research provide valuable hints how to construct, manufacture, assembly and operate bearings.
Źródło:
Journal of KONES; 2008, 15, 2; 257-262
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczanie współczynników dynamicznych ramy fundamentowej wirnika laboratoryjnego w oparciu o przedziały adekwatności
The laboratory rotor support frame dynamic coefficients obtaining based on the adequacy ranges
Autorzy:
Banaszek, S.
Powiązania:
https://bibliotekanauki.pl/articles/328314.pdf
Data publikacji:
2002
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
łożyska ślizgowe
dynamika konstrukcji
slide bearings
dynamics of construction
Opis:
W niniejszej pracy przedstawiono obiekt badań, jakim jest model MES ramy fundamentowej wielkogabarytowego wirnika laboratoryjnego. Na modelu tym przeprowadzono symulację badania metodą wzbudzeń harmonicznych. Przedstawiono również różne koncepcje doboru przedziałów adekwatności. W oparciu o te przedziały dokonano transformacji charakterystyk. Dla otrzymanych w ten sposób charakterystyk masowo-sztywnościowo-tłumieniowych wykonano następnie obliczenia porównawcze.
The paper presents the object of investigations, which is FE-model of the large laboratory rotor support frame. The harmonic force response was simulated using this model. The different concepts of adequacy ranges' assumption were presented. The characteristics' transformation was made based on those adequacy ranges. A rotor dynamic simulations were made using obtained mass, stiffness and damping characteristics.
Źródło:
Diagnostyka; 2002, 26; 116-120
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CFD analysis of pressure distribution in slide conical bearing lubricated with non-Newtonian oil
Autorzy:
Czaban, A.
Powiązania:
https://bibliotekanauki.pl/articles/241851.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
slide conical bearing
CFD
non-Newtonian oil
pressure distribution
Źródło:
Journal of KONES; 2013, 20, 3; 117-124
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Concept for interpretation and assessment of slide bearings operation in diesel engines in probabilistic approach
Autorzy:
Girtler, J.
Powiązania:
https://bibliotekanauki.pl/articles/244383.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
friction heat
operation
friction energy
slide bearing
friction work
Opis:
The paper provides a proposal of interpretation that valuates operations, which (just like operation of Hamilton and Maupertius shown in the classical mechanics and operation resulting from changes of body momentum) is considered as a physical quantity with: joule-second [joule x second] as a unit of measure. It presents suggestion of a quantitative interpretation of operation of a slide journal bearing, in which energetic interactions proceed at determined time. It has been here motivated that when the suggested interpretation for slide bearing operation in which energy conversions proceed, is accepted the operation can be a carrier of information about states of the systems so, it can become a diagnostic signal. Moreover, an original method of operation analysis and assessment for a slide journal bearing has been herein presented with regards to its reliability and safety. Possibilities of applying this method for the process of taking the rational operating decisions have been shown, too. The homogeneous process of Poison has been applied in order to prove usability of operation in such interpretation. This process has enabled construction of a model of the course of getting-worse operation for a bearing while the operation time goes by. Therefore, the model is a random process of homogenous and independent gains in energy lost due to friction and slide bearing wear.
Źródło:
Journal of KONES; 2007, 14, 4; 83-89
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pressure and velocity distribution in slide journal bearing gap by laminar unsteady lubrication
Autorzy:
Krasowski, P.
Powiązania:
https://bibliotekanauki.pl/articles/950091.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
laminar unsteady lubrication
journal slide bearing
pressure
velocity perturbation
Opis:
This paper shows results of numerical solutions an modified Reynolds equations for laminar unsteady oil flow in slide Journal bearing gap. Laminar unsteady oil flow is performed during periodic and a periodic perturbations of bearing load or is caused by the changes of gap height in time. Above perturbations occur mostly during the starting and stopping of machine. During modelling crossbar bearing operations in combustion engines, bearing movement perturbations from engine vertical vibrations causes velocity flow perturbations of lubricating oil on the bearing race and on the bearing slider in the circumferential direction. This solution example applies to isothermal bearing model with infinity length. Lubricating oil used in this model has Newtonian properties and constant dynamic viscosity. Perturbations connected with unsteady lubricating oil velocity in the circumferential direction on the slide bearing and on the slider of bearing were taken into consideration. Results are presented in the dimensionless hydrodynamic pressure and velocity distribution diagrams. Received solutions were compared with the solution received by the stationary lubrication flow in the slide Journal bearing, which were made with the same parameter assumption by constant dynamic oil viscosity. Isothermal bearing model is similar to friction node model by steady-state heat load conditions.
Źródło:
Journal of KONES; 2009, 16, 2; 239-246
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Use of Additive Manufacturing Technology to Manufacture Slide Bearing Sleeves – a Preliminary Study
Zastosowanie metody wytwarzania addytywnego do wykonania panwi łożysk ślizgowych – badania wstępne
Autorzy:
Andrearczyk, Artur
Bagiński, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/1857781.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
additive manufacturing
slide bearings
polymers
wytwarzanie addytywne
łożyska ślizgowe
polimery
Opis:
The paper presents the application of an unconventional method of manufacturing bearing sleeves as well as the carrying out of preliminary research in which the manufactured components were used on a real object. Additive manufacturing methods are increasingly being used, which leads to the rapid development of technologies and their applications. The MultiJet Printing technology was used in the research, which allows precise 3D printing of sleeves made of polymeric materials. The first part of the article deals with the selected manufacturing method and the preparation of a model. The study aimed at evaluating the usefulness of bearings manufactured using the 3D printing technology to support slow-speed rotors. The preliminary research described focuses on the study of operating parameters such as the moment of friction and the bearing node temperature as a function of rotational speed during operation. Experimental tests were carried out at low rotational speeds. This paper presents and determines the scope of the application of bearings manufactured using 3D printing technology.
W pracy przedstawiono zastosowanie niekonwencjonalnej metody wytwarzania panwi łożysk wraz z przeprowadzeniem badań wstępnych z użyciem wykonanych elementów na obiekcie rzeczywistym. Metody wytwarzania addytywnego stosowane są na coraz większą skalę, co wiąże się ze znacznym rozwojem technologii i ich aplikacjami. Do badań wykorzystano technologię MultiJet Printing, pozwalającą na precyzyjny wydruk 3D panwi z materiałów polimerowych. Pierwsza część pracy poświęcona jest wybranej metodzie wytwarzania i przygotowaniu modelu. Celem pracy było określenie przydatności łożysk wykonanych technologią wydruku 3D do podparcia wolnoobrotowych wirników. Opisywane badania wstępne obejmują poznanie takich parametrów pracy jak moment tarcia oraz temperatura węzła łożyskowego w funkcji prędkości obrotowej podczas pracy. Część eksperymentalną przeprowadzono w warunkach niskich prędkości obrotowych. W niniejszej pracy przedstawiono i określono zakres zastosowań łożysk wytworzonych omawianą w artykule metodą wydruku 3D.
Źródło:
Tribologia; 2020, 291, 3; 7-14
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problem of the selection of the rate of the grip of tyres to the roadway covered with petroleum-derived substances
Autorzy:
Aleksandrowicz, P.
Żółtowski, B.
Powiązania:
https://bibliotekanauki.pl/articles/2073664.pdf
Data publikacji:
2015
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
rate of the adhesion
road safety
slide of the vehicle
Opis:
The area of the roadway covered with petroleum-derived substance is characterized by lowering the grip of tyres of the vehicle to the roadway. In realistic conditions of the road traffic that kind of obstacles are with difficulty noticeable for the driver and sedatenesses constitute the element of surprise which in combination with violent lowering the rate of the adhesion usually results in loss directional of vehicle. The vehicle which fell into the unchecked skid, in particular on the curve of the road is posing a threat to drivers driving up from the opposite direction on account of random migration of such a vehicle to their traffic lane. Driving vehicles on the roadway this way polluted also have limited possibilities of taking defensive action in order to avoid confronting. For the evaluation of the bearing of drivers in understanding violating by them safety rules in the road traffic on the roadway polluted with vehicles with substances mentioned above applying the rate of the adhesion which is appropriate in calculations and simulations is significant to the analysed road situation. In the article so a problem of the selection of this rate was taken relating to the case study of an existing road accident consisting in inducing collision of two vehicles moving along an asphalt wet roadway polluted with petroleum-derived substance - with diesel.
Źródło:
Journal of Polish CIMEEAC; 2015, 10, 1; 7--15
1231-3998
Pojawia się w:
Journal of Polish CIMEEAC
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanism of the fatigue cracks development in bearing slide layer
Autorzy:
Sikora, J.
Kłopocki, J.
Majewski, W.
Powiązania:
https://bibliotekanauki.pl/articles/245360.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
bearings
bearing slide layer
fatigue cracks
fracture mechanics
lubrication
fractography
Opis:
In the paper some problems concerning relations between slide bearings fatigue resistance and the bearing material and structure characteristics of the slide layer have been considered on the basis of bibliographic descriptions. In particular the mechanisms of the nucleation and development of cracks were discussed as dependent not only on the bearing dynamic loading pattern and number of loading cycles but also on the slide layer geometry and its structure design. Two basic types of the possible fatigue cracks were distinguished: structural and "magistral" ones. The process of the fatigue rapture formation and development were analyzed from the viewpoint of fracture mechanics according to the Nemec 's model. In particular types of fatigue cracks, structural cracks (cross-section of the bearing surface layer) and mechanism of fatigue crack development from the viewpoint of fracture mechanics, as well as fracture of magistral type (on the surface of the bearing) almost perpendicular to the circular direction of the bush, fatigue durability for various types of fracture developments, Fractures on the boundary of Si particle in AlSnl2 Si4 alloy and Sn particle in AlSn20 alloy, fractures on the boundary of the intermetallic compound grain CuAl2 in AlSn20 alloy are presented in the paper.
Źródło:
Journal of KONES; 2009, 16, 4; 423-427
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Some geometrical data for the elliptical bearings in artificial robots
Autorzy:
Wierzcholski, K.
Powiązania:
https://bibliotekanauki.pl/articles/245499.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
artificial robots
elliptical slide bearings
comparisons with natural human joints
Opis:
In this paper are considered analogies between elliptical-slide hearing occurring in artificial robots and elliptical natural human joints as well artificial human femoral prosthesis. The comparisons between elliptical human femoral prosthesis and mechanical spherical bearings indicate the advantages implicated from the use ol elliptical slide bearings To prow above statement we describe some remarks referring the elliptical femoral prosthesis and natural human joints. Numerous contemporary studies and experimental measurements regarding the human hip joints indicate, that femoral head is, in fact naturally elliptical. Therefore, the femoral elliptical complete prosthesis as well half prosthesis must be better adapted to the natural hip joint with elliptical bonehead and neck of the femur. The elliptical femoral prosthesis was designed for solving the problem of the relationship between the femoral prosthesis head and the anatomical acetabulum and to minimize the various incidence namely wear protrusion and pain effects. Performed clinical tests indicate that elliptical prosthesis head have the most advanced technological shapes because are based on the anatomy and biomechanics features of the natural human hip joint The same aspects are occurring during functioning the elliptical slide bearing in artificial robots. The mechanics of elliptical-slide bearings can be taken as the appropriate shape in the respect to the operating treatment. Taking into account the hydrodynamic theory of lubrication of cooperating surfaces we must finally find pressure distributions, friction forces, friction coefficients and wear. To prepare this calculations we ought al first determine and calculate the fields of the regions of lubrication on the internal surface lying on the elliptical surfaces and on the external elliptical surface of the sleeve. Surface lubrication regions consist of the sums of spherical triangle, which are lying on the abovementioned surface. In this paper are determined the formulas for the field calculations of elliptical triangle with the three vertexes (points) for coordinates which are foreseen measured.
Źródło:
Journal of KONES; 2014, 21, 2; 295-302
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of influence of bearing material thermal conductivity coefficient on hydrodynamic lubrication of a conical slide bearing
Autorzy:
Czaban, A.
Powiązania:
https://bibliotekanauki.pl/articles/246592.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
slide bearing
hydrodynamic lubrication
conical bearing
heat conduction
pressure distribution
Opis:
One of the main parameters affecting the hydrodynamic lubrication of slide bearings is the viscosity of lubricating oil. Many studies show, that significant changes in the viscosity of oil occur along with changes in its temperature. The influence on the temperature distribution in the lubrication gap of the slide bearing have a variety of factors, and one of them is the amount of heat exchanged between the lubricant and the environment. The temperature of the lubricating oil of operating bearing is usually higher than the ambient temperature. In addition to the convection, which occurs during the flow (heat exchange related to the oil supply and discharge system) some amount of heat is transferred to the bearing sleeve material (and also to the bearing shaft), and then it is conducted to sleeve outer surface. The amount of heat transferred through the bearing sleeve is mainly dependent on the difference of temperatures between inner and outer sleeve surfaces and also depend on the heat conduction coefficient of sleeve material. This article presents the results of modelling of the influence of amount of heat conducted through the bearing material, on the hydrodynamic lubrication of a conical slide bearing. The study concerned various values of the heat conduction coefficient of the bearing material to investigate its influence on the temperature values of lubricating oil, and thus, on its viscosity, on the distribution of hydrodynamic pressure and on the calculated values of bearing load carrying capacities and friction forces.
Źródło:
Journal of KONES; 2018, 25, 2; 89-96
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza zużycia stali bainitycznej w skojarzeniu ślizgowym w wybranych warunkach eksploatacji na stanowisku T-05 (rolka - klocek)
Analysis of wear the bainitic steel in sliding contact for selected operated conditions on T-05 stand (roller – block system)
Autorzy:
Stanik, Z.
Kubik, A.
Bąkowski, H.
Powiązania:
https://bibliotekanauki.pl/articles/253668.pdf
Data publikacji:
2016
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
stal bainityczna
skojarzenie ślizgowe
tarcie
bainitic steel
slide surface
friction
Opis:
W artykule przedstawiona została analiza skojarzenia ślizgowego w różnych warunkach eksploatacji. W pracy przedstawiono wpływ prędkości oraz obciążenia na zużycie i współczynnik tarcia, stali o strukturze bainitycznej w skojarzeniu ślizgowym oraz graficzną interpretację wyników badań na podstawie uzyskanych rezultatów z przeprowadzonych badań doświadczalnych i metalograficznych.
The article presented an analysis of the sliding contact in different operating conditions. In this work showed the influence of speed and load on the wear and friction coefficient of steel with bainitic structure in sliding contact and graphical interpretation of the test results on the basis of the results obtained from the research and metallographic examination.
Źródło:
TTS Technika Transportu Szynowego; 2016, 12; 349-354
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CFD analysis of effect of misalignment plane position on hydrodynamic lubrication of slide conical bearing
Autorzy:
Czaban, A.
Powiązania:
https://bibliotekanauki.pl/articles/246851.pdf
Data publikacji:
2017
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
slide bearing
hydrodynamic lubrication
conical bearing
misalignment
CFD
pressure distribution
Opis:
The numerical calculations of the hydrodynamic lubrication of slide bearings can be carried out by modelling the oil flow for a given value of height of bearing lubrication gap. On the basis of the assumed height of the lubrication gap, the values of hydrodynamic pressures, load carrying capacities, friction forces, temperatures, can be determined. The bearing lubrication gap height can be influenced by many effects, e.g. misalignment between the shaft axis and the axis of the sleeve, vibrations, varying load, change in the viscosity value of lubricating oil caused by changes in temperature, pressure, shear rate or by oil ageing, wear of journal and sleeve surfaces. This article presents the results of numerical simulations concerning the influence of the misalignment between the axis of shaft and the axis of sleeve of the sliding conical bearing on its hydrodynamic lubrication, by taking into account the position of the plane in which the misalignment occurs. In this study, there was defined an angle between the plane in which the misalignment occurs and the plane in which lies the line of centres of corresponding bearing without misalignment. In this research, to investigate the impact of the position of the plane in which the misalignment occurs, the CFD software, designed to solve general flow phenomena, was used. It was assumed, that the bearings operate in a steady state conditions, the flow in the bearing lubrication gap is laminar and non-isothermal. A lubricating oil has shear properties as the Ostwald-de Waele fluid.
Źródło:
Journal of KONES; 2017, 24, 2; 65-72
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies