Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "powstawanie" wg kryterium: Temat


Tytuł:
Badania spoiw malowideł olejnych oraz mikroanalityczne metody ich identyfikacji
L’ÉTUDE DES LIANTS DES PEINTURES À L’HUILE ET DES MÉTHODES MICRO ANALYTIQUES DE LEUR IDENTIFICATION
Autorzy:
Biliński, Roman
Powiązania:
https://bibliotekanauki.pl/articles/537948.pdf
Data publikacji:
1969
Wydawca:
Narodowy Instytut Dziedzictwa
Tematy:
teoria Englera
spoiwa malowideł olejnych
powstawanie błon olejowych
glicerydy
akroleina
rozkład gliceryny
spoiwa z oleju lnianego
dehydratacja
Opis:
L’article traite du problème difficile et jusqu’à présent non résolu de la création, de la composition chimique et de la construction de tous genres de membranes huileuses, surtout des liants des peintures à l ’huile ainsi que d’autres objets possédant une polychromie, dont la substance sont les produits naturels des processus de „séchage” des huiles végétales. Le côté pratique de l’article est de faire connaître au conservateur ainsi qu’à ceux qui s’occupent du problème des liants huileux, l’identification des microéchantillons prélevés des vieilles peintures. L’article relate les études de la littérature scientifique et les résultats des travaux de recherches, concernant les membranes d’huiles végétales — particulièrement d’huile de lin, la plus souvent employée — en tant que matériel formant les liants huileux. On a présenté par ordre chronologique le développement des travaux de connaissance et d’explication des processus physico-chimiques qui sont liés à la formation et à la composition des membranes huileuses. On s ’est efforcé de présenter de nombreux phénomènes non connus se produisant dans les liants huileux, citant les opinions anciennes et actuelles sur le chimisme et le mécanisme de leur création, ainsi que les problèmes de stabilisation et de destruction. De nombreuses théories et aspects, dont les auteurs sont divers chercheurs des processus de formation des membranes dans la consolidation de la masse d’huiles séchantes, ont été présentés par ordre chronologique du développement de la connaissance de ces problèmes. Renouant à la riche littérature scientifique et technique l ’auteur de l ’article présente les résultats des observations et des recherches concernant l’établissement du rôle direct ou indirect de la glycérine en tant que facteur participant à la construction, la plastification et la stabilisation des membranes créant des liants purs et pigmentés. Les travaux essentiels de l ’auteur portaient sur la solution du problème de l’acroléine provenant du processus naturel automatique de la dehydratation de la glycérine constitutionnelle, en tant que matière première de laquelle, selon les données obtenues sur la base des résultats des expériences effectuées, devrait se former dans la masse d’huile „séchante”, le polymère constituant la partie intégrale de la structure du fondement des liants huileux. On a effectué les essais sur des masses fraiches d’huile de lin se consolidant ainsi que sur les membranes déjà formées, et sur les objectifs dont les liants huileux ont subi des processus de vieillissement de différents degrés. On a établi empiriquement, que l ’acroléine remplit réellement — comme on le prévoyait — le rôle de matière constructive de la membrane du liant huileux. Les résultats des recherches et des expériences effectuées ont été présentés dans des tableaux et illustrés par des graphiques. L’article décrit la fonction et l’importance de la glycerine liée, laissant toujours certaines quantités de eubtraces, même dans les peintures à l ’huile les plus anciennes. Cette trace est caractéristique pour les restes huileux du liant et sur cette base, on peut effectuer l’identification de l ’origine du matériel de l ’objectif examiné. En soumettant à la dehydratation les restes de glycérine contenue dans le liant, on obtient l’acroléine, qui est une substance que l ’on peut découvrir directement. En effet, elle donne avec des réactifs définis des composés colorés ou des composés intérieurement complexes, qui la caractérisent par une fluorescence distinctive dans l ’ultraviolet. Pour développer le processus de dehydratation intensif et complet, l’auteur a élaboré un catalyseur amplement décrit. L’article indique en détail un moyen pratique d’e ffectuer par trois méthodes l ’identification des échantillons des anciens liants huileux et traite le côté théorique de ces réactions colorées de reconnaissance. On a également décrit les accessoires et l’équipement de laboratoire ainsi que ses ensembles typiques, et les éprouvettes nouvellement construites et utilisées par l’auteur de l ’article.
Źródło:
Ochrona Zabytków; 1969, 1; 19-34
0029-8247
Pojawia się w:
Ochrona Zabytków
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Powstawanie i przeobrazanie sie gleb hydrogenicznych w krajobrazie mlodoglacjalnym Pojezierza Mazurskiego i Rowniny Sepopolskiej
Autorzy:
Gotkiewicz, J
Okruszko, H
Smolucha, J
Powiązania:
https://bibliotekanauki.pl/articles/808327.pdf
Data publikacji:
1996
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
siedliska podmokle
Pojezierze Mazurskie
gleby
powstawanie gleb
obszary mlodoglacjalne
przeobrazenia gleb
Rownina Sepopolska
gleby hydrogeniczne
Opis:
Istnieje wyraźna zależność między zróżnicowaniem geomorfologicznym Poj. Mazurskiego i Równiny Sępopolskiego a ilością i iodzajami występujących siedlisk hydrogenicznych i związanych z nimi gleb. W wyróżnionych na badanym terenie 9 typach krajobrazu zróżnicowanie w procentowym udziale powierzchni siedlisk hydrogenicznych w ogólnej powierzchni terenu wynosiło od 3,3 do 26,2%. Najwięcej siedlisk hydrogenicznych występuje na piaszczystych terenach sandrowych równin, najmniej na płaskich, gliniastych równinach zastoiskowych. W siedliskach hydrogenicznych dominują torfowiska, 64.1% na Poj. Mazurskim, 98.5% na Równinie Sępopolskiej. W zależności od stopnia rozkładu torfu oraz jego miąższości różnicują się rodzaje gleb hydrogenicznych. W krajobrazie morenowych wzgórz i pagórków gliniastych dominują gleby zaliczane do kompleksów potencjalnie mokrego lub okresowo mokrego. Gleby te występują w siedliskach o soligenicznym typie zasilania i mają wyraźną tendencję do powtórnego zabagniania się. W krajobrazie sandrowych równin przeważają gleby kompleksów potencjalnie posusznego i okresowo suchego. Związane są z siedliskami o topogenicznym typie zasilania nie podlegającymi wtórnemu zabagnieniu przy braku konserwacji melioracyjnej sieci odwadniającej. W warunkach ekstensywnego użytkowania zaznacza się degradacja organicznej masy glebowej nabierającej cech hydrofobowości. W badaniach wyróżniono odrębny typ hydrologicznego zasilania, określany jako spływowy, swym charakterem zbliżony do fluwiogenicznego, ale związany z wodami powierzchniowymi spływającymi do siedlisk hydrogenicznych z przyległych terenów. Wyniki badań wykazują, że w młodoglacjalnym krajobrazie siedliska hydrogeniczne intensywnie zasilane, soligeniczne, odporne na przesuszenie stanowią 26,8%, siedliska powiązane głównie z zasilaniem podsiąkowym, topogeniczne, podatne na przesuszenie - 47,8%, a siedliska z dopływem powierzchniowym (spływowe i fluwiogeniczne) - 25,4 % ogólnej powierzchni terenów hydrogenicznych. Rozpoznanie zróżnicowania siedlisk hydrogenicznych, powodowanego geomorfologią ułatwia ustalenie zasad ich zrównoważonego rozwoju.
There is a clear dependence between geomorghological differentiation of the Masurian Lake District and Sępopol Plain and the number and type of hydrogenic sites as well as soils, connected with them. 9 types of landscape were distinguished in the examined region. The percentage of hydrogenic sites in the total area of the territory was equal to 3.3 - 26.2%. Sandy outwash plains contain the greatest number of hydrogenic sites, and flat, clay plains of ice - dammed lake origin contain the fewest. The most hydrogenic sites are situated on sandy outwash plains, the fewest - on flat, clay plains of ice-dammed lake origin. Peatbog prevail among hydrogenic sites: they constitute 64.1% in the Masurian Lake District and 98.5% on the Sępopol Plain. Hydrogenic soils are divided into different types according to the degree of peat decomposition, and its thickness. Soils of potentially or periodically wet prognostic soil-moisture complex dominate in morainic landscape of hills and hillocks composed of clay. Such soils are present in sites with a soligenous type of - water - feeding and they show a strong tendency to re-swamping. Soils of potentially dry and dry prognostic soil-moisture complex prevail in landscape of outwash plains. Such soils are connected with sites of topogenous type of - water - feeding and are not subjected to re-swamping when there is a lack of maintenance of the melioration drainage network. Degradation of organic soil matter, which starts to be revealed by the features of hydrophobia takes place in the case of extensive cultivation. A specific type of hydrological feeding was distinguished in the course of research. It was described as superficial run-off, similar in character tofluviogenous, but connected with surface waters flowing to hydrogenic sites from the neighbouring grounds. The results of investigation indicate that in the case of young glacial landscape, hydrogenic sites which are fed intensively, of soligenous type and therefore resistant to overdrying, consitute 26.8% of the total area of hydrogenic sites. The sites connected with ascending feeding, of topogenous type, prone to overdrying constitute 47.8%, and the ones with surface inflow (superficial run-off and fluoviogenous) constitute 25.4% of the total area of hydrogenic sites. Recognition of differentiations concerning hydrogenic sites and related to geomorghology, enables formulation of the rules of their balanced development.
Źródło:
Zeszyty Problemowe Postępów Nauk Rolniczych; 1996, 431; 181-201
0084-5477
Pojawia się w:
Zeszyty Problemowe Postępów Nauk Rolniczych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model matematyczny do obliczania stężenia THM w chlorowanej wodzie
Mathematical model for the estimation of tolal trihalomethane concentration in the chlorinated water
Autorzy:
Hrynaszkiewicz, T.
Kucharski, M.
Powiązania:
https://bibliotekanauki.pl/articles/236997.pdf
Data publikacji:
2000
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
oczyszczanie wody
utleniacze
produkty uboczne utleniania
chlorowanie wody
trihalometany
powstawanie trihalometanów
stężenie trihalometanów
model matematyczny
równanie empiryczne
Opis:
Chlorinated were water samples from the river Supraśl, which is the primary source of municipal supply for the city of Białystok. The riverine water of interest carries large amounts of natural organic compounds (humic substances), which are trihalomethane precursors. Making use of the results obtained, we proposed a mathematical model, which enables the total trihalomethane concentration in the chlorinated water to be calculated. It was found that the maximum deviation from the real quantily did not exceed 6 mg/m3, and about 90% of the results fell in the range of 3 mg/m3, which corresponds with the relative error range of 8%.
Źródło:
Ochrona Środowiska; 2000, 3; 7-12
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przyczyny i możliwości zmniejszenia hałasu technologicznego na prasach mechanicznych
Causes and possibilities of technological noise reduction in mechanical presses
Autorzy:
Sadowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/2070444.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
hałas technologiczny pras
powstawanie hałasu
minimalizacja hałasu
technological noise in presses
occurrence of noise
reduction of noise
Opis:
W pierwszej części artykułu przedstawiono przyczyny powstawania hałasu technologicznego na prasach mechanicznych podczas wykrawania materiałów, a w drugiej części możliwości jego zmniejszenia na przykładzie badań własnych przeprowadzonych w Zakładach Motory-zacyjnych Polmo w Brodnicy, na prasie PMS-100.
Causes of technological noise generation in mechanical presses during materiał cutting arę presented in the first part of paper. In the second part, possibilities of noise reduction on the example of authors' own researches performed on the PMS-100 press at the Polmo Motor Compa- ny in Brodnica are shown.
Źródło:
Inżynieria i Aparatura Chemiczna; 2009, 2; 125-127
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Estimation of significance of AlkB and AlkA proteins in DNA repair in Escherichia coli model
Autorzy:
Sokołowska, B.
Maciejewska, A. M.
Jóźwik, A.
Kuśmierek, J. T.
Powiązania:
https://bibliotekanauki.pl/articles/333316.pdf
Data publikacji:
2011
Wydawca:
Uniwersytet Śląski. Wydział Informatyki i Nauki o Materiałach. Instytut Informatyki. Zakład Systemów Komputerowych
Tematy:
rozpoznawanie obrazów
klasyfikator najbliższych sąsiadów
analiza cech pracy odbiornika
naprawa DNA
adaptacyjna odpowiedź
powstawanie mutacji
bakterie e.coli
pattern recognition
fuzzy k-NN classifier
ROC analysis
DNA repair
adaptive response
mutagenesis
AlkB dioxygenase
AlkA glycosylase
E.coli
Opis:
The paper concerns estimation of significance of differences of mutagenesis level between the wild-type strain (wt) and its derivatives which differ in DNA repair ability, namely alkA and alkB strain, devoided AlkA glycosylase and AlkB dioxygenase activity, respectively. The strains were analyzed for their ability to repair 1,N6-ethenoadenine (εA) - chloroacetaldehyde adduct to DNA. The analysis was done using classical statistical and pattern recognition methods. The obtained results confirmed that AlkB dioxygenase plays the most important role in εA repair in E. coli in the experimental modeling.
Źródło:
Journal of Medical Informatics & Technologies; 2011, 17; 321-326
1642-6037
Pojawia się w:
Journal of Medical Informatics & Technologies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative analysis of selected models of water coning in gas reservoirs
Analiza porównawcza wybranych modeli powstawania stożków wodnych w złożach gazowych
Autorzy:
Smulski, R.
Powiązania:
https://bibliotekanauki.pl/articles/219305.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
powstawanie stożków wodnych
wydajność krytyczna gazu
water coning
critical gas rate
Opis:
Exploitation of natural gas fields with edge or underlying water is usually defined per analogy to the oil fields. The existing models do not correspond to reality as they do not describe relevant processes related with a turbulent gas flow near the well. The natural gas exploitation with productivity greater than critical may be advantageous in view of summaric depletion and rate of depletion. Article presents: the analysis of the selected critical rates models, determining the influence of specific parameters on the critical rate values, introducing new modified formula for critical rates, and comparative calculations for various configurations with the numerical model.
Problem eksploatacji złóż gazu ziemnego z wodą podścielającą lub okalającą jest określany zwykle na podstawie analogii ze złożami ropnymi. Istniejące modele nie odpowiadają rzeczywistości, ponieważ nie opisują istotnych procesów związanych z turbulentnym przepływem gazu w pobliżu odwiertu. Równocześnie eksploatacja gazu z wydajnością większą od krytycznej może być korzystna z punktu widzenia sumarycznego sczerpania złoża oraz szybkości jego sczerpania. W artykule przedstawiono: analizę wybranych modeli wydajności krytycznej, określenie wpływu poszczególnych parametrów na wartości wydajności krytycznych, wprowadzenie nowych zmodyfikowanych formuł określających wydajności krytyczne oraz przeprowadzenie obliczeń porównawczych dla różnych konfiguracji z wykorzystaniem modelu numerycznego.
Źródło:
Archives of Mining Sciences; 2012, 57, 2; 451-470
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of Fly Generation During Cone-Winding Using the Image Processing Technique
Badanie powstawania puchu podczas przewijania przędz z zastosowaniem techniki analizy obrazu
Autorzy:
Ghane, M.
Karbalaei Tafti, S. M.
Semnani, D.
Sheikhzadeh, M.
Powiązania:
https://bibliotekanauki.pl/articles/234267.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
przetwarzania obrazu
powstawanie puchu
proces przewijania
włochatość przędz
fibre fly
winding machine
hairiness
hair counts
image processing
fly length
Opis:
Fibre fly generation is a major problem for the textile industry, not only for health reasons but also because of quality problems associated with products. In this work, fiber ?y generation during the cone-winding process was studied' emphasizing the effect of yarn spinning parameters. 100% acrylic yarns were produced with different twists and linear densities. The hairiness and hair counts of the yarns were measured using an evenness testing machine. In order to collect the fibre fly in the cone-winding process, the whole path of the yarn, from bobbin to cone, was covered with a plastic chamber so that the fly generated could be collected. The image processing technique was then used to calculate the length of flying fibres generated . The number of flies in each group length and also the total length of flies in 100 meters of yarn were calculated. The number of flies in each length group is defined as fly counts. For each yarn type 25 samples, 500 meters of yarn on each sample, were tested. The results revealed that both the twist and linear density of the yarn has a significant effect on the amount of fly generated during the winding process. As the twist of the yarn increases, the amount of fibre fly decreases. This effect is greater in higher linear densities. For all samples the total length of flies was also calculated and compared to the hairiness index of the yarn. The results showed a good linear regression between these two quantities, with a linear regression coefficient of R2 = 0.905.
Powstawanie puchu przy przetwarzaniu przędz jest jednym z głównych problemów przemysłu tekstylnego, nie tylko ze względów zdrowotnych ale również z powodu uzyskania odpowiedniej jakości produktu. W pracy przeanalizowano powstawanie puchu podczas procesu przewijania, ze szczególnym uwzględnieniem parametrów przędzenia. Wyprodukowano 100% przędze akrylowe o różnym skręcie i masie liniowej. Badano włochatość przędz za pomocą przyrządu do pomiaru nierównomierności przędzy. W celu zebrania całkowitej ilości wytworzonego puchu, przewijaną przędzę na odcinku pomiędzy nawojami umieszczono w plastikowych komorach. Technika analizy obrazu została zastosowana w celu pomiaru długości fragmentów włókien tworzących puch. Obliczano ilość włókien w danym przedziale długości i ilość włókien puchu przypadających na 100 m przędzy. Badano 500 metrów przędzy dla 25 typów próbek różniących się skrętem i masą liniową. Stwierdzono, że zarówno skręt jaki i masa liniowa przędz mają istotny wpływ na ilość wytwarzanego przy przewijaniu puchu. Ze wzrostem skrętu i masy liniowej spada ilość wytworzonego puchu. Przeprowadzono również porównanie pomiędzy wytworzonym puchem a włochatością przędzy, stwierdzając liniową zależność miedzy tymi dwoma wielkościami.
Źródło:
Fibres & Textiles in Eastern Europe; 2012, 6A (95); 58-62
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigations of the quality of the reclaim of spent moulding sands with organic binders
Autorzy:
Dańko, R.
Powiązania:
https://bibliotekanauki.pl/articles/380260.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
regeneracja
masa formierska
powstawanie gazu
reclamation
moulding sand
moulding sand examinations
gas formation
Opis:
Modern investigation methods and equipment for the quality estimation of the moulding sands matrices with organic binders, in their circulation process, are presented in the paper. These methods, utilising the special equipment combined with the authors investigation methods developed in the Faculty of Foundry Engineering, AGH the University of Science and Technology, allow for the better estimation of the matrix quality. Moulding sands systems with organic binders require an in-depth approach to factors deciding on the matrix technological suitability as well as on their environmental impact. Into modern methods allowing for the better assessment of the matrix quality belongs the grain size analysis of the reclaimed material performed by means of the laser diffraction and also the estimation of the moulding sand gas evolution rate and identification of the emitted gases and their BTEX group gases content, since they are specially hazardous from the point of view of the Occupational Safety and Health.
Źródło:
Archives of Foundry Engineering; 2012, 12, 3; 13-18
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Photocatalytic mineralisation of humic acids using TiO2 modified by tungsten dioxide/ hydrogen peroxide
Autorzy:
Tryba, B.
Piszcz, M.
Borowiak-Paleń, E.
Grzmil, B.
Morawski, A. W.
Powiązania:
https://bibliotekanauki.pl/articles/779747.pdf
Data publikacji:
2012
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
kwasy humusowe
WO3/TiO2
powstawanie rodników
humic acids photodecomposition
OH radicals formation
Opis:
TiO2 of anatase structure was modified by tungsten dioxide and H2O2 in order to obtain WO3-TiO2 photocatalyst with enhanced photocatalytic activity under both, UV and artificial solar light irradiations. WO2 was dissolved in 30% H2O2 and mixed with TiO2 in a vacuum evaporator at 70°C. Such modified TiO2 was dried and then calcinated at 400 and 600°C.The prepared samples and unmodified TiO2 were used for the photocatalytic decomposition of humic acids (Leonardite standard IHSS) in the aqueous solution under irradiations of both, UV and artificial solar light. Modification of TiO2 with tungsten dioxide and H2O2 improved separation of free carriers in TiO2 which resulted in the increase of OH radicals formation. Calcination caused an increase of anatase crystals and higher yield in OH radicals. The uncalcined samples showed high abilities for the adsorption of HA. Combination of adsorption abilities and photocatalytic activity of photocatalyst caused that the uncalcined TiO2 modified with WO2/H2O2 showed the shortest time of HA mineralisation. The mineralisation of HA under the artificial solar light was much lower than under the UV. It was proved that, although OH radicals are powerful in the decomposition of HA, adsorption can facilitate the contact of the adsorbed molecules with the photocatalyst surface and accelerate their photocatalytic decomposition.
Źródło:
Polish Journal of Chemical Technology; 2012, 14, 2; 54-61
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza powstawania leja w mieszalniku z układem typu rotor-stator użytym jako mieszadło
Analysis of a central vortex formation in a mixer with the rotor-stator system used as a stirrer
Autorzy:
Nykiel, S.
Wesołowski, P.
Alejski, K.
Powiązania:
https://bibliotekanauki.pl/articles/2072224.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
mieszalnik
rotor-stator
powstawanie leja
mixer
vortex formation
Opis:
W pracy badano proces powstawania leja wokół wału wysokoobrotowego układu typu stator-rotor, pracującego jako mechaniczne mieszadło w osi zbiornika pozbawionego przegród. Analizowano wpływ częstości obrotów rotora oraz wysokości zawieszenia mieszadła nad dnem zbiornika na głębokość powstającego leja w trzech mieszalnikach o różnych stosunkach średnicy zbiornika do średnicy mieszadła D/d. Mieszanym medium była woda destylowana (t = 20°C), wypełniająca każdy z testowanych zbiorników do wysokości H - 2D. Stwierdzono, że względna głębokość leja wyraźnie wzrasta zarówno ze wzrostem częstości obrotów rotora jak i ze wzrostem względnej wysokości zawieszenia mieszadła nad dnem zbiornika.
Creation of a central vortex around the high speed shaft in rotor-stator type system, working as mechanical stirrer in the axis of tank without baffles was studied. Influence of rotor speed and the distance between agitator and tank bottom on the depth of a central vortex in three mixers with various geometric ratios Did (tank diameter to impeller diameter) was analyzed. Tested medium was distilled water (t - 20°C) filling each of the examined tanks to the level H = 2D. The relative depth of central vortex increased significantly with the increase of both the rotor speed and the relative distance between agitator and tank bottom.
Źródło:
Inżynieria i Aparatura Chemiczna; 2013, 5; 449--450
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nie wszystkie włókna są równe: o efektywności włókien w betonie – odcinek 1
Autorzy:
Glinicki, M.
Powiązania:
https://bibliotekanauki.pl/articles/343001.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Producentów Cementu
Tematy:
zbrojenie betonu
zbrojenie rozproszone
garaż wielokondygnacyjny
warstwa spadkowa
włókno stalowe
fibrobeton
rysa
powstawanie rys
praca sił zewnętrznych
Źródło:
Budownictwo, Technologie, Architektura; 2013, 2; 56-57
1644-745X
Pojawia się w:
Budownictwo, Technologie, Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The late Silurian-Middle Devonian long-term eustatic cycle as a possible control on the global generic diversity dynamics of bivalves and gastropods
Autorzy:
Ruban, Dmitry A.
Powiązania:
https://bibliotekanauki.pl/articles/94693.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet im. Adama Mickiewicza w Poznaniu
Tematy:
bivalves
gastropods
diversity dynamics
origination
extinction
eustatic changes
Silurian
Devonian
małże
ślimaki
powstawanie
wyginięcie
zmiany eustatyczne
Dewon
Opis:
A long-term eustatic cycle (fall and subsequent rise of the global sea level) embraced the late Silurian-Middle Devonian time interval. Potentially, these sea-level changes could drive global biodiversity. The stratigraphic ranges of 204 bivalve genera and 279 gastropod genera included into the famous Sepkoski database allow reconstructing changes in the total diversity and the number of originations and extinctions of these important groups of marine benthic macro- -invertebrates during this interval. None of the recorded parameters coincided with the long-term global sea-level cycle. It cannot be not excluded, however, that the global sea-level changes did not affect the regions favourable for bivalve and gastropod radiation because of regional tectonic mechanisms; neither can it be excluded that the eustatic control persisted together with many other extrinsic and intrinsic controls. Interestingly, the generic diversity of gastropods increased together with a cooling trend, and vice versa. Additionally, the Ludlow, Eifelian, and Givetian biotic crises affected, probably, both fossil groups under study. There was also a coincidence of the relatively high bivalve generic diversity, initial radiation of gastropods and the entire biota, and the diversification of brachiopods with the Early Devonian global sea-level lowstand, and this may be interpreted as evidence of a certain eustatic control on the marine biodiversity.
Źródło:
Geologos; 2013, 19, 3; 193-200
1426-8981
2080-6574
Pojawia się w:
Geologos
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Continuous versus pulsed origination and extinction and biozones
Autorzy:
Trammer, J.
Powiązania:
https://bibliotekanauki.pl/articles/139157.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
origination
extinction
rates
biozones
powstawanie
wygaśnięcie
tempo
okres
Opis:
The count of biozones as an approximate measure of the origination and extinction rates of index taxa (mostly species) is proposed. The mean number of extinctions of these taxa per m.y. is 1.136 (Palaeozoic mean 0.902, Mesozoic mean 1.680, Cenozoic mean 0.789). In contrast with the majority of taxa, the originations and extinctions of index taxa, as well as of other taxa belonging to biostratigraphically important systematic groups, seems to be continuous.
Źródło:
Acta Geologica Polonica; 2014, 64, 4; 361-366
0001-5709
Pojawia się w:
Acta Geologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies