Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "field model" wg kryterium: Temat


Tytuł:
Modeling of Eutectic Formation in Al-Si Alloy Using A Phase-Field Method
Autorzy:
Ebrahimi, Z.
Powiązania:
https://bibliotekanauki.pl/articles/353792.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
phase-field model
Al-Si alloy
eutectic growth
fluctuations
Opis:
We have utilized a phase-field model to investigate the evolution of eutectic silicon in Al-Si alloy. The interfacial fluctuations are included into a phase-field model of two-phase solidification, as stochastic noise terms and their dominant role in eutectic silicon formation is discussed. We have observed that silicon spherical particles nucleate on the foundation of primary aluminum phase and their nucleation continues on concentric rings, through the Al matrix. The nucleation of silicon particles is attributed to the inclusion of fluctuations into the phase-field equations. The simulation results have shown needle-like, fish-bone like and flakes of silicon phase by adjusting the noise coefficients to larger values. Moreover, the role of primary Al phase on nucleation of silicon particles in Al-Si alloy is elaborated. We have found that the addition of fluctuations plays the role of modifiers in our simulations and is essential for phase-field modeling of eutectic growth in Al-Si system. The simulated finger-like Al phases and spherical Si particles are very similar to those of experimental eutectic growth in modified Al-Si alloy.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 4; 1969-1981
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of Xe redistribution in UO2
Autorzy:
Trujillo, L.
Powiązania:
https://bibliotekanauki.pl/articles/1934014.pdf
Data publikacji:
2011
Wydawca:
Politechnika Gdańska
Tematy:
UO2
grain boundaries
finite element method
phase field model
Opis:
The transport of fission gases in UO2 based nuclear fuels has a significant effect on the fuel performance. They can induce swelling of the fuel by the nucleation of gas bubbles within the fuel, and increase the mechanical interaction between the UO2 pellet and the cladding; also these bubbles can escape through the grain boundaries and contribute to the gaseous atmosphere in the fuel pin. We propose a model for the redistribution of xenon in the presence of different sinks, including nucleation and growth of gas bubbles. The finite element method has been implemented for the numerical solution of the model.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2011, 15, 2; 157-190
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ warunków zasilania na parametry eksploatacyjne silnika z magnesami trwałymi
Preliminary Investigation of an Induction Motor Supplied with Voltage Containing Subharmonics Using Field Methods
Autorzy:
Gnaciński, P.
Hallmann, D.
Powiązania:
https://bibliotekanauki.pl/articles/1367507.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
maszyny indukcyjne
subharmoniczne
interharmoniczne
jakość napięcia
model polowy
induction machines
subharmonics
interharmonics
power quality
field model
Opis:
This paper deals with the effect of voltage subharmononics on stator windings currents and rotational speed of an induction cage machine. The preliminary investigations were carried out with 2D machine model implemented in Ansoft Maxwell environment. The results of calculation are presented for a delta-connected machine of the rated power 3 kW.
Artykuł dotyczy wpływu subharmonicznych napięcia na prądy uzwojeń stojana i prędkość obrotową silnika indukcyjnego klatkowego. Badania wstępne wykonano za pomocą modelu 2D zaimplementowanego w środowisku Ansoft Maxwell. Wyniki obliczeń przedstawiono dla silnika indukcyjnego o mocy 3 kW, połączonego w trójkąt.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2015, 4, 108; 65-69
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Field-circuit analysis of AC machine taking into account stator winding asymmetry
Autorzy:
Pietrowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/1813709.pdf
Data publikacji:
2012
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
winding asymmetry
induction machine
axial flux
field-circuit model
Opis:
The paper presents the influence of an asymmetry of a stator winding on an axial flux in AC machine. The objective research was performed for selected values of asymmetry. The axial flux was calculated as the sum of flux linkage with stator winding. In order to achieve a magnetic field distribution a dedicated 2D finite element model of AC machine was elaborated. The waveforms of axial flux and torque-time characteristic have been shown. It can be concluded that the asymmetry has significant impact on the axial flux and the pulsation of torque.
Źródło:
Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały; 2012, 66, 32; 386-392
1733-0718
Pojawia się w:
Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Current State of Art of Satellite Altimetry
Autorzy:
Łyszkowicz, A.
Bernatowicz, A.
Powiązania:
https://bibliotekanauki.pl/articles/320651.pdf
Data publikacji:
2017
Wydawca:
Polskie Forum Nawigacyjne
Tematy:
satellite altimetry
radar altimeter
waveform retracker
ocean gravity field model
sea level
gravity anomalies
ocean tides
Opis:
One of the fundamental problems of modern geodesy is precise definition of the gravitational field and its changes in time. This is essential in positioning and navigation, geophysics, geodynamics, oceanography and other sciences related to the climate and Earth’s environment. One of the major sources of gravity data is satellite altimetry that provides gravity data with almost 75% surface of the Earth. Satellite altimetry also provides data to study local, regional and global geophysical processes, the geoid model in the areas of oceans and seas. This technique can be successfully used to study the ocean mean dynamic topography. The results of the investigations and possible products of altimetry will provide a good material for the GGOS (Global Geodetic Observing System) and institutions of IAS (International Altimetry Service). This paper presents the achievements in satellite altimetry in all the above disciplines obtained in the last years.
Jednym z podstawowych problemów współczesnej geodezji jest dokładne określenie pola grawitacyjnego i jego zmian w czasie. Ma to zasadnicze znaczenie dla zastosowań w pozycjonowaniu i nawigacji, w geofizyce, geodynamice, oceanografii i innych naukach związanych z klimatem i środowiskiem Ziemi. Jednym z głównych źródeł danych grawimetrycznych jest altimetria satelitarna, która dostarcza dane grawimetryczne z prawie 75% powierzchni globu ziemskiego. Altimetria satelitarna dostarcza również dane do badania lokalnych, regionalnych i globalnych procesów geofizycznych, modelu geoidy na obszarach mórz i oceanów oraz średniej dynamicznej topografii oceanów. Wyniki badań i potencjalne produkty danych altimetrycznych mają stanowić materiał dla Globalnego Geodezyjnego Systemu Obserwacji GGOS (Global Geodetic Observing System) i instytucji IAS (International Altimetry Service).
Źródło:
Annual of Navigation; 2017, 24; 31-47
1640-8632
Pojawia się w:
Annual of Navigation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of Triz SU-Field Models in the Process of Improving the Injector of an Internal Combustion Engine
Autorzy:
Chybowski, L.
Powiązania:
https://bibliotekanauki.pl/articles/2064896.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
Theory of Inventing Problem Solving
TRIZ
Su-Field model
SFM
inventive standards
IS
fuel injector
diesel engine
Opis:
The article describes a method for analyzing and solving problem situations with the use of Su-Field models and 76 inventive standards. These tools are part of the “Theory of Inventive Problem Solving”. The author has presented the basic concepts of Su-Field models, including in the compilation of the most commonly used substances their fields and types of interactions in Su-Field models. The inventive standards have also been presented and grouped. Attempts have been made to solve two undesirable situations that occur during the operation of a complex technical system, which is the fuel injector of the self-ignition engine. Problem situations related to insufficient impact were modelled - too low tightening of the injector spring, and negative (harmful) interaction - erosive wear of the holes in the atomizer nozzle. Using the inventive standards of Class-1 and Class-2, general solutions to these problems have been found. After the transformation, exemplary detailed ways of solving the aforementioned problems have been presented in order to improve the design of the injector for these models. A summary and comments on the applicability of the presented methodology, regarding such complex technical systems, have also been presented.
Źródło:
Multidisciplinary Aspects of Production Engineering; 2018, 1, 1; 257--268
2545-2827
Pojawia się w:
Multidisciplinary Aspects of Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Simulation of Solidification Microstructure based on Adaptive Octree Grids
Autorzy:
Yin, Y.
Li, Y.
Wu, K.
Zhou, J.
Powiązania:
https://bibliotekanauki.pl/articles/947350.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
isothermal solidification
binary alloy
numerical simulation
phase field model
microsegregation
microstructure
krzepnięcie izotermiczne
stop dwuskładnikowy
symulacja numeryczna
Opis:
The main work of this paper focuses on the simulation of binary alloy solidification using the phase field model and adaptive octree grids. Ni-Cu binary alloy is used as an example in this paper to do research on the numerical simulation of isothermal solidification of binary alloy. Firstly, the WBM model, numerical issues and adaptive octree grids have been explained. Secondary, the numerical simulation results of three dimensional morphology of the equiaxed grain and concentration variations are given, taking the efficiency advantage of the adaptive octree grids. The microsegregation of binary alloy has been analysed emphatically. Then, numerical simulation results of the influence of thermo-physical parameters on the growth of the equiaxed grain are also given. At last, a simulation experiment of large scale and long-time has been carried out. It is found that increases of initial temperature and initial concentration will make grain grow along certain directions and adaptive octree grids can effectively be used in simulations of microstructure.
Źródło:
Archives of Foundry Engineering; 2016, 16, 2; 33-40
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model polowy zjawisk elektromechanicznych napędu liniowego z magnesami trwałymi
Field model of electromechanical phenomena in the linear drive with permanent magnets
Autorzy:
Just, K.
Tarnowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/210854.pdf
Data publikacji:
2017
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
mechatronika
modelowanie i symulacja
napęd elektromagnetyczny
metoda elementów skończonych
analiza pola
model polowy
mechatronics
modelling and simulation
electromagnetic drive
finite element method
field analysis
field model
Opis:
W artykule przedstawiono problematykę modelowania i analizy liniowego napędu elektromagnetycznego z magnesami trwałymi z uwzględnieniem podstawowych zjawisk fizycznych. W modelu do analizy pola magnetycznego wykorzystano środowisko Comsol Multiphysics oparte na metodzie elementów skończonych (MES), którego zastosowanie umożliwia przeprowadzenie stosunkowo szybkiego modelowania struktury obiektu oraz wykonanie obszernej analizy zjawisk elektromagnetycznych w celu wyznaczenia parametrów całkowych pola. Na podstawie analizy dwuwymiarowego pola magnetycznego wyznaczono charakterystyki statyczne napędu, takie jak: siła elektromagnetyczna, indukcyjność uzwojeń oraz strumień magnetyczny.
The article presents problems of modelling and analysis of a linear permanent magnet electromagnetic drive taking into account basic physical phenomena. The Comsol Multiphysics environment based on the finite element method (FEM) is used in the magnetic field analysis, which allows for a relatively fast modelling of the object’s structure and performs extensive analysis of electromagnetic phenomena to determine the field integration parameters. Based on the analysis of the two-dimensional magnetic field, the static characteristics of the drive were determined, such as electromagnetic force, winding inductance, and magnetic flux.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2017, 66, 3; 125-131
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polowo-obwodowy model osiowosymetrycznego aktuatora liniowego
The field-circuit model of axis-symmetrical linear actuator
Autorzy:
Mikołajewicz, J.
Wojciechowski, R. M.
Powiązania:
https://bibliotekanauki.pl/articles/1367685.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
Model polowo-obwodowy
aktuator liniowy
analiza numeryczna
Field-circuit model
linear actuator
numerical analysis
Opis:
In the paper a field-circuit model of axis-symmetrical linear actuator has been presented. An actuator with conical armature has been considered and investigated. The integral parameters of the model, such as the inductance and the force have been determined on the basis of 2D electromagnetic field distributions, which have been obtained for the field model. Then, the calculated parameters have been implemented to the circuit model, ie. the model of the system comprising the coupled equations of the electrical circuit and the mechanical equilibrium equation of the considered actuator. In the considerations, the eddy current effect has not been taken account. The selected results of simulations have been presented.
W artykule przedstawiono polowy-obwodowy model osiowosymetrycznego aktuatora liniowego. Rozpatrywano aktuator nurnikowy z nurem stożkowym. Parametry całkowe modelu, takie jak indukcyjność oraz siła, zostały wyznaczone na podstawie rozkładu dwuwymiarowego pola magnetycznego. Obliczone parametry skupione następnie zaimplementowano w modelu obwodowym przetwornika, tzn. modelu obejmującym układ sprzężonych równań obwodu elektrycznego oraz równania dynamiki. W rozważaniach pominięto tłumiący charakter prądów wirowych. Przedstawiono wybrane wyniki badań symulacyjnych.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2015, 3, 107; 173-177
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A field-circuit model of the hybrid magnetic bearing
Autorzy:
Wajnert, Dawid
Powiązania:
https://bibliotekanauki.pl/articles/140245.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
dynamic simulation
field-circuit model
hybrid magnetic bearing
symulacja dynamiczna
model polowo-obwodowy
hybrydowe łożysko magnetyczne
Opis:
The paper presents a simulation model of the hybrid magnetic bearing dedicated to simulations of transient state. The proposed field-circuit model is composed of two components. The first part constitutes a set of ordinary differential equations that describes electrical circuits and mechanics. The second part of the simulation model consists of parameters such as magnetic forces, dynamic inductances and velocity-induced voltages obtained from the 3D finite element analysis. The MATLAB/Simulnik software was used to implement the simulation model with the required control system. The proposed field-circuit model was validated by comparison of time responses with the prototype of the hybrid magnetic bearing.
Źródło:
Archive of Mechanical Engineering; 2019, LXVI, 2; 191-208
0004-0738
Pojawia się w:
Archive of Mechanical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Current state of art of satellite altimetry
Autorzy:
Łyszkowicz, A. B.
Bernatowicz, A.
Powiązania:
https://bibliotekanauki.pl/articles/145515.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wysokościomierz radarowy
anomalia grawitacyjna
pływy oceaniczne
satellite altimetry
radar altimeter
waveform retracker
ocean gravity field model
sea level
gravity anomalies
ocean tides
Opis:
One of the fundamental problems of modern geodesy is precise defi nition of the gravitational fi eld and its changes in time. This is essential in positioning and navigation, geophysics, geodynamics, oceanography and other sciences related to the climate and Earth’s environment. One of the major sources of gravity data is satellite altimetry that provides gravity data with almost 75% surface of the Earth. Satellite altimetry also provides data to study local, regional and global geophysical processes, the geoid model in the areas of oceans and seas. This technique can be successfully used to study the ocean mean dynamic topography. The results of the investigations and possible products of altimetry will provide a good material for the GGOS (Global Geodetic Observing System) and institutions of IAS (International Altimetry Service). This paper presents the achievements in satellite altimetry in all the above disciplines obtained in the last years. First very shorly basic concept of satellite altimetry is given. In order to obtain the highest accuracy on range measurements over the ocean improved of altimetry waveforms performed on the ground is described. Next, signifi cant improvements of sea and ocean gravity anomalies models developed presently is shown. Study of sea level and its extremes examined, around European and Australian coasts using tide gauges data and satellite altimetry measurements were described. Then investigations of the phenomenon of the ocean tides, calibration of altimeters, studies of rivers and ice-sheets in the last years are given.
Źródło:
Geodesy and Cartography; 2017, 66, 2; 259-270
2080-6736
2300-2581
Pojawia się w:
Geodesy and Cartography
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza rozruchu jednofazowego silnika indukcyjnego z pomocniczym uzwojeniem kondensatorowym przy zmianie geometrii żłobka
An Effect of Rotor Slot Geometry on Starting Properties of Single-Phase Capacitor Induction Motor
Autorzy:
Wilk, M. J.
Makowski, K
Powiązania:
https://bibliotekanauki.pl/articles/1368734.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
maszyny elektryczne
jednofazowy
silnik indukcyjny
kondensatorowy
model polowy
optymalizacja
moment rozruchowy
prąd rozruchowy
electrical machines
single-phase
capacitor induction motor
field model
optimization
starting
torque
starting current
Opis:
Single-phase induction motor are widely used in industry and home appliance devices. However, they are characterized by relatively low efficiency and starting torque. Using a finite element model combined with optimization methods can be useful in designing new prototypes (virtual) or to improve exiting motor. The paper outlines the process of optimization of a single-phase capacitor induction motor. Numerical optimization performance depends on the formulation of the optimiaztion problem. Selection of the objective function, the variables and the area of solution can be assessed by performing sensitivity analysis of adopted optimization criteria of tested motor. For this purpose, the effect of geometric variables describing shape of rotor slot and capacitor capacitance on chosen criteria, like rotational torque and current was examined in locked rotor test in Flux2d/GOT-it software.
Jednofazowe silniki indukcyjne są powszechnie stosowane w przemyśle oraz AGD. Charakteryzują się one jednak stosunkowo niską sprawnością oraz momentem rozruchowym. Metody optymalizacyjne oraz dwuwymiarowy model polowo-obwodowy można z powodzeniem zastosować w projektowaniu prototypów (wirtualnych) nowych silników lub poprawy istniejących. W artykule przedstawiono zarys procesu optymalizacji jednofazowego silnika indukcyjnego z pomocniczym uzwojeniem kondensatorowym. Wydajność obliczeń numerycznych optymalizacyjnych zależy od sposobu sformułowania problemu optymalizacji. Wyboru funkcji celu, zmiennych niezależnych oraz obszaru dopuszczalnego zmian parametrów można dokonać przeprowadzając analizę wrażliwości przyjętych kryteriów optymalizacji testowanego silnika. W tym celu zbadano wpływ zmiennych geometrycznych opisujących kształt żłobka wirnika oraz pojemności kondensatora pracy w środowisku obliczeniowym GOT-it/Flux2D na przyjęte kryteria, czyli moment obrotowy i prąd w stanie zahamowanego wirnika.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2013, 4, 100/2; 89-93
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przegląd hybrydowych modeli pożaru
Review of Hybrid Fire Models
Autorzy:
Gałaj, J.
Oleksy, M.
Powiązania:
https://bibliotekanauki.pl/articles/373746.pdf
Data publikacji:
2013
Wydawca:
Centrum Naukowo-Badawcze Ochrony Przeciwpożarowej im. Józefa Tuliszkowskiego
Tematy:
modelowanie pożaru
polowy model pożaru
strefowy model pożaru
hybrydowe modele pożaru
technika CFD
fire modeling
field fire model
zone fire model
hybrid fire model
CFD technique
Opis:
Cel: Celem niniejszego artykułu jest omówienie oraz ocena hybrydowych modeli pożaru, które zostały opracowane na świecie w ostatnich kilkudziesięciu latach. Wprowadzenie: Modelowanie pożarów przy użyciu komputera miało swój początek w latach 80-tych. Od tej pory aż do dzisiaj powstało kilkaset różnych modeli, poczynając od najprostszych integralnych poprzez strefowe do najbardziej złożonych polowych wykorzystujących technikę CFD (Computational Fluid Dynamics). Ze względu na bardzo długi czas obliczeń, jaki jest wymagany w przypadku modeli polowych (przy prostszych obiektach jest to średnio kilkadziesiąt godzin dla jednego scenariusza, przy bardziej złożonych nawet kilkaset), w końcu lat 90-tych zaczęto opracowywać koncepcję modeli, których dokładność byłaby znacznie większa niż modeli strefowych, natomiast czas obliczeń byłby istotnie krótszy. Takim przykładem mogą być hybrydowe modele pożaru. Metodologia: Artykuł zawiera podstawowe informacje na temat aktualnie dostępnych na świecie modeli hybrydowych. Omówiono w nim: model komórkowy Chowa wykorzystujący rozpowszechniony model strefowy CFAST, modele FASIT i FAS3D, które uwzględniają dodatkową warstwę mieszania, model wielowarstwowy Suzuki, w którym zastosowano podział pomieszczenia na n poziomych warstw o tej samej wysokości, model mieszany Hua wykorzystujący kombinację modeli strefowych i polowych. Biorąc pod uwagę ogólne wymagania, jakie powinny spełniać modele pożarów, w pracy zamieszczono ocenę poszczególnych modeli hybrydowych, a także próbę ich porównania ze sobą. Na końcu zamieszczono podsumowanie rozważań i kilka ogólnych wniosków z nich wynikających. Wnioski: Na podstawie przeprowadzonej oceny można stwierdzić, że obecnie istniejące modele hybrydowe nie są w stanie w pełni zastąpić modeli polowych opartych na technice CFD. Aby było to możliwe, należy jeszcze włożyć wiele pracy w ich rozwój, a w szczególności uwzględnić m.in. następujące zagadnienia: zmianę parametrów pożaru w każdej komórce, uniwersalny model gaszenia przy pomocy tryskaczy, dysz mgłowych lub prądownic, wpływ pożaru na konstrukcję budynku, możliwość wpływania użytkownika na dokładność otrzymanych wyników, a tym samym czas obliczeń, określenie bieżącego zapotrzebowania na tlen i wpływu jego stężenia na proces spalania oraz zastosowanie odpowiedniego modelu turbulencji.
Purpose: The main purpose of this article is to describe and evaluate of hybrid fire models which have been developed all over the world in the last several decades. Introduction: Computer modeling of fires was introduced in the early eighties. Several hundred fire models have been created till now from the simplest integral to the most complex field one, using CFD (Computational Fluid Dynamics) technique. Field models require very long time for single simulation (the simpler objects need often about several dozen hours for simple scenario and even hundred hours for more complex scenarios). That was the main reason for appearance of a new idea in modeling of fires. Several hybrid models have been carried out in the end of nineties and in the beginning of this century. Its accuracy was comparable with field models, but time needed for single fire scenario was significantly shorter. Methodology: This article contains basic information on hybrid models and includes their evaluation. One of the first models was a result of work made by Charters and McIntosh on Leeds University (England), which effected in FASIT program created for studying of fires in tunnels and FAS 3D being a three-dimensional version of the first one (fires in compartments). CFD modeling elements were used in this program and each gas layer was divided into the grid of control volumes. For the first time, the mixing zone was separated into upper and lower zone. Obtained model has both main features of the field and zone models, what enables to simulate the gas fire environment in compartments more precisely than with the typical zone model without the need of performing long and expensive calculations. In turn, Chow proposed a method of using the existing CFAST tool for larger compartments. He divided the analyzed volume into several smaller cells (he examined cases with 3, 9 and 15 cells), and then, for each one of them he used the same approach as for single compartment. In 2002, Suzuki et al. proposed a modified multilayer model. He divided single compartments into horizontal layers with equal heights and determined the same parameters for each one of them using the equations following from mass and energy conservation laws. Another approach to the hybrid model was proposed by Hua et al. They used a combination of field and zone models to simulate and analyze the fire smoke propagation in multistorey building. It was assumed that in compartments with more complex fire dynamics, that is, i.e. with a fire source, the calculation mechanism would be consistent with the field model, while in compartments where the hot and cold zones are determined more clearly (i.e. corridors, compartments located farther from the fire source), the zone model should be used. Conclusions: Article presents several characteristics which show time curves of under-ceiling layer thickness achieved for the proposed model and for the typical zone and field models. Last of the mentioned solutions seems to be very interesting, but even in compartments with simpler fire dynamics where the zone model was used, unpredictable processes can occur (i.e. unsteady flows, local whirls). They can result in considerable spatial differences of calculated parameters, such as: temperatures, pressures, gas concentrations, etc. Based on the evaluation and comparison of discussed hybrid models one can claim, that neither of them doesn’t meet all requirements. There is still a lot of work that should be done on these models to improve them by consideration of the following aspects: changes of fire parameters in every cell, turbulence model, application of universal model of extinguishing systems including sprinklers, mist heads and nozzles, affecting of fire on building construction, possibility for user to influence on the calculation accuracy, determining of actual oxygen consumption and influence of different factors on combustion and pyrolysis process.
Źródło:
Bezpieczeństwo i Technika Pożarnicza; 2013, 4; 79-92
1895-8443
Pojawia się w:
Bezpieczeństwo i Technika Pożarnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of field mathematical models for designing of windings of brushless permanent magnet motors
Zastosowanie matematycznych modeli pola w projektowaniu uzwojeń bezszczotkowych silników z magnesami trwałymi
Autorzy:
Volokitina, Y.
Vlasov, A.
Opalev, Y.
Powiązania:
https://bibliotekanauki.pl/articles/158589.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
Tematy:
brushless DC electric motor
motor with external rotor
mathematical field model
electromotive force
harmonic analysis
bezszczotkowy silnik elektryczny prądu stałego
silnik elektryczny z zewnętrznym wirnikiem
model matematyczny pola
siła elektromotoryczna
analiza harmoniczna
Opis:
The article presents a method for the electromotive force (EMF) determination and for correction of a connection diagram of a brushless DC (BLDC) motor winding. An appropriate mathematical field model has been proposed for this purpose. Calculation results are confirmed by experimental researches of the BLDC motor ДБ100-90-1-Р42 with an external rotor.
W artykule przedstawiono metodę wyznaczania siły elektromotorycznej bezszczotkowego silnika prądu stałego, dla sprawdzenia poprawności połączeń w jego schemacie uzwojenia. W tym celu zaproponowano odpowiedni model matematyczny pola. Wyniki obliczeń numerycznych potwierdzono badaniami eksperymentalnymi bezszczotkowego silnika z wirnikiem zewnętrznym typu ДБ100-90-1-Р42.
Źródło:
Prace Instytutu Elektrotechniki; 2014, 267; 59-66
0032-6216
Pojawia się w:
Prace Instytutu Elektrotechniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of the finite element method for parameter estimation of the circuit model of a high power synchronous generator
Autorzy:
Berhausen, S.
Paszek, S.
Powiązania:
https://bibliotekanauki.pl/articles/200790.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
synchronous generator model
finite element method
field-circuit model measurement verification
circuit model parameter estimation
model synchronicznego generatora
metoda elementów skończonych
weryfikacja modelu pomiaru pola obwodu
estymacja parametrów modelu obwodu
Opis:
The paper presents the two-dimensional, field-circuit model of a high power synchronous generator verified by measurements. The model enables determining the waveforms of electromagnetic quantities in steady and transient states. Verification of the model was based on comparison of the measured and calculated waveforms after a disturbance in the voltage regulation system of a TWW-200-2 generator operating in Połaniec Power Plant. There are also presented the field methods for determining electromagnetic parameters (synchronous reactances and time constants) when using the distributions of static and quasi-static, magnetic and electromagnetic fields calculated by the finite element method (FEM). The set of these parameters was used as the starting parameters of the optimization algorithm for estimation of electromagnetic parameters of the synchronous generator circuit model. The dynamic waveforms under the generator load conditions calculated by the finite element method are the basis of parameter estimation. The parameter estimation of the generator model was performed with the use of the least squares method.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2015, 63, 3; 575-582
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza własności akustycznych pomieszczenia w zależności od kształtu sufitu
Analysis of acoustic properties of room depending on the shape of ceiling
Autorzy:
Jabłoński, M.
Powiązania:
https://bibliotekanauki.pl/articles/362605.pdf
Data publikacji:
2010
Wydawca:
Instytut Fizyki Budowli Katarzyna i Piotr Klemm
Tematy:
parametry akustyczne
ocena akustyczna pomieszczeń
komputerowy model pola akustycznego
acoustic parameters
estimate of acoustic accommodation
computer model of acoustic field
Opis:
W pracy przedstawiono porównanie własności akustycznych pomieszczenia dla różnego rodzaju konstrukcji sufitu. Wykorzystano parametry związane ze stosunkiem energii (C80), przestrzenne (LF), określające zrozumiałość mowy (STI) oraz spadek energii w przestrzeni (DL2)
This paper presents a comparison of acoustic properties of room for different types of ceiling construction. We used parameters related to energy ratio (C80), spatial (LF), indicating the speech intelligibility (STI) and a spatial decay (DL2).
Źródło:
Fizyka Budowli w Teorii i Praktyce; 2010, T. 5, nr 3, 3; 13-16
1734-4891
Pojawia się w:
Fizyka Budowli w Teorii i Praktyce
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On spins and genes
Autorzy:
Miękisz, Jacek
Szymańska, Paulina
Powiązania:
https://bibliotekanauki.pl/articles/748773.pdf
Data publikacji:
2012
Wydawca:
Polskie Towarzystwo Matematyczne
Tematy:
Ising model, self-regulating gene, mean-field approximation
Ising model, self-regulating gene, mean-field approximation.
Opis:
Naszym celem jest zrozumienie i przewidywanie zachowania się układów wielu oddziałujących obiektów, takich jak cząstki i spiny w fizyce statystycznej czy geny i białka w biologii molekularnej. Jako matematycy pragniemy udowadniać twierdzenia i wyprowadzać analityczne wzory. Bardzo szybko okazuje się, że w istotnych zastosowaniach jest to niemożliwe. Co robić? Część z nas ucieka w wyrafinowane symulacje komputerowe. Czy nie ma innej drogi? Czy jesteśmy ograniczeni do wyboru pomiędzy Matematyką i Mathematicą? Na pomoc przychodzi metoda samouzgodnionego pola średniego. Ferromagnetyczny model Isinga i samoregulujący się gen zilustrują nam tę niezwykle uniwersalną metodę otrzymywania przybliżonych rozwiązań analitycznych.
Many processes in natural and social sciences can be modeled by systems of interacting objects. It is usually very difficult to obtain analytic expressions describing time evolution and equilibrium behavior of such systems. Very often we rely only on computer simulations. Fortunately, in many cases one can construct useful approximation schemes and derive exact results which capture some specific features of a given process. A frequent approach is to replace interactions between objects by a mean interaction. Here we illustrate a self-consistent mean-field approximation in two examples: the Ising model of interacting spins and a simple model of a self-regulating gene.
Źródło:
Mathematica Applicanda; 2012, 40, 1
1730-2668
2299-4009
Pojawia się w:
Mathematica Applicanda
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental study and mathematical modeling of the residence time distribution in magnetic mixer
Autorzy:
Rakoczy, R.
Kordas, M.
Grądzik, P.
Konopacki, M.
Story, G.
Powiązania:
https://bibliotekanauki.pl/articles/778204.pdf
Data publikacji:
2013
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
mixing model
residence time distribution
modelling
magnetic field
Opis:
This study reports on research results in the field of a mixing process under the action of a transverse rotating magnetic field (TRMF). The main objective of this paper is to present the effect of this type of a magnetic field on residence time distribution (RTD) measurements. This paper evaluates the performance of a magnetic mixer by comparing the results of an experimental investigations in a pilot set-up and theoretical values obtained from mathematical model. This model consisting of the set of ideal continuous stirred tank reactors (CSTR) fitted well the experimental data.
Źródło:
Polish Journal of Chemical Technology; 2013, 15, 2; 53-60
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The MMM Expert System: From a Reference Signal to The Method Validation
Autorzy:
Witoś, M.
Powiązania:
https://bibliotekanauki.pl/articles/97927.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
geomagnetic field
magneto-mechanical effects
numerical model
SHM
Opis:
This paper presents the first step in the methodological approach to the validation of the metal magnetic memory (MMM) method in the non-destructive testing (NDT) applications and in the systems used for diagnosis of early stages of material fatigue in mechanical constructions (structural health monitoring, SHM, and prognosis health management, PHM). The study is focused on the properties of the external natural source of magnetisation of the object under MMM examination and the impact of the magnetisation components. The precise data obtained from measurements of the Earth's geomagnetism (from ground stations and satellites) and the revised model of the Earth's magnetism can be applied in order to calibrate high sensitivity magnetic field sensors, validate the measurement results and extend the functional capacity of the MMM method.
Źródło:
Fatigue of Aircraft Structures; 2012, 4; 123-140
2081-7738
2300-7591
Pojawia się w:
Fatigue of Aircraft Structures
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza oddziaływań indukcyjnych pola magnetycznego na ekrany torów wielkoprądowych w układzie płaskim
Analysis of the induction of the magnetic field on the screens of large current tracks in the flat arrangement
Autorzy:
Leśniak, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/2031412.pdf
Data publikacji:
2021
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
pole magnetyczne
model
tor prądowy
magnetic field
current paths
Opis:
W artykule dokonano graficznej interpretacji pola magnetycznego w żyłach powrotnych wybranego kablowego toru prądowego, przy wykorzystaniu oprogramowaniu komercyjne Ansoft Maxwell. W aspekcie omawianej problematyki, wyznaczenie rozkładu pola magnetycznego w modelu odwzorowującym przekrój prostokątny toru prądowego - w skrócie „PTP”, warunkuje prawidłowy opis skorelowanych z nim zjawisk wtórnych. Zaliczamy do nich m.in. naprężenia cieplne lub mechaniczne, przyspieszające proces starzenia, powodujący powstawanie strat w przesyle energii elektrycznej lub uszkodzenia kabli elektroenergetycznych. W artykule odzwierciedlono ważne aspekty poruszanej problematyki w sposób poglądowy, tzn. na przykładzie obliczeniowym. Z uwagi na obszerność poruszanego zagadnienia, na tym etapie pominięto jego analityczny aspekt.
The paper deals with effects of three phase current flow in screened high-current tracks. The problems related to the analysis of separate phase magnetic field and its influence on the screening elements of the configuration have been considered. Special attention has been paid to the modeling of magnetic field in the screens of flat configuration. The results of quantitative field analysis have been presented and the graphical interpretation of these results has been performed. Some more significant observations have been specified.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2021, 73; 53--56
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical simulation of single- and multi-step shear stress relaxations of isotropic magnetorheological elastomer using fractional derivative viscoelastic models
Autorzy:
Nam, T. H.
Petríková, I.
Marvalová, B.
Powiązania:
https://bibliotekanauki.pl/articles/38695689.pdf
Data publikacji:
2022
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
magnetorheological elastomer
stress relaxation
fractional viscoelastic
model
magnetic field
Opis:
The paper presents numerical simulations of single- and multi-step shear stress relaxations of isotropic magnetorheological elastomer (MRE) using fractional derivative Maxwell and Kelvin–Voigt viscoelastic models. The isotropic MRE has been fabricated by filling micro-sized carbonyl iron particles in silicone rubber. Fractional derivative Maxwell and Kelvin–Voigt viscoelastic models were used to fit the experimental data of the isotropic MRE measured by single- and multi-step relaxation tests at different constant strains and external magnetic fields. The fractional Maxwell viscoelastic model showed a relatively large difference between the measured and calculated results. The fractional Kelvin–Voigt model was fitted well with the experimental data of the isotropic MRE at various constant strain levels under different magnetic fields in both single- and multi-step shear stress relaxations. The calculated shear stress with the long-term prediction is in excellent agreement with the measured one. Therefore, the fractional derivative Kelvin–Voigt viscoelastic model is applicable to predict the long-term stress relaxation of the isotropic MRE.
Źródło:
Archives of Mechanics; 2022, 74, 4; 251-266
0373-2029
Pojawia się w:
Archives of Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Distribution of the Polymer Melt Velocity and Temperature in the Spinneret Channel of Bi-component Fibre Melt Spinning: a Mathematical Model
Autorzy:
Feng, Pei
Liu, Dashuang
Zhang, Ronggen
Yang, Chongchang
Powiązania:
https://bibliotekanauki.pl/articles/2056290.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
composite fibre
spinning assembly
velocity field distribution
mathematical model
Opis:
For the stability of composite fibre spinning, the difference in and distribution of the polymer melt velocity during the spinning are among the factors of importance. Based on the basic equation for the control of composite spinning dynamics, boundary conditions are identified and reported in this paper. A mathematical model for the symmetric and asymmetric distribution of the melt flow velocity in the microhole of the spinneret of the composite spinning assembly was developed. The accuracy of the mathematical model was also ascertained. It gives a theoretical basis for the designing of a composite spinning assembly.
Źródło:
Fibres & Textiles in Eastern Europe; 2021, 6 (150); 49--53
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effectiveness research of physical and chemical methods appfication for oil recovery enhancing using the asp for the strutynsky oil field conditions
Autorzy:
Moroz, Lesya
Uhrynovskyi, Andrii
Popovych, Vasyl
Busko, Bohdan
Kogut, Galyna
Powiązania:
https://bibliotekanauki.pl/articles/409661.pdf
Data publikacji:
2020
Wydawca:
STE GROUP
Tematy:
ASP solution
field
model
oil recovery coefficient
waterflooding pattern
Opis:
The purpose of the article is to enhance the oil recovery coefficient of lower Menilite deposits of the Strutynsky oil field by using an ASP solution (a mixture of three agents: alkaline, surfactant and polymer (ASP)). The tasks were solved by choosing an effective method of enhancing oil recovery by using EORgui software and hydrodynamic modelling software by using Petrel, Eclipse software. Calculations of computer simulations indicate the possibility and technological efficiency of residual oil extraction through the use of ASP solution. After using the method of oil recovery enhancing in the lower Menilite deposits of the Strutynsky oil field by means of ASP solution, the coefficient of final oil recovery will increase from the initial value of 10.4% to the predicted 17.6%. For the first time, geological and hydrodynamic models have been created for the conditions of the Lower Menilite deposits of the Strutynsky oil field, and the most appropriate method for oil recovery enhancing by using the EORgui program has been selected. The suggested method for oil recovery enhancing can be applied within the framework of the concept for reviving the Lower Menilithic deposits of the Strutynsky oil field, as well as in other oil fields of Ukraine, which are developed with waterflood patterns and have similar geological and physical characteristics.
Źródło:
Management Systems in Production Engineering; 2020, 2 (28); 104-111
2299-0461
Pojawia się w:
Management Systems in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On the need to maintain homogenous temperature field within the working agent at the intake of a jet engine turbine
Autorzy:
Pawlak, W. I.
Błachnio, J.
Powiązania:
https://bibliotekanauki.pl/articles/245331.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
turbine jet engine
simulation model
working agent temperature field
Opis:
The paper presents results from numerical experiments with use of the computer model of the SO-3 engine designed for simulations. The model has been purposefully modified to take account of the assumed nonhomogeneity of the temperature field within the working agent at the turbine intake. It turned out that such nonhomogeneity substantially affects dynamic and static properties of the engine are considered as an object of control since it leads to a lag of the acceleration time and to increasing in fuel consumption. The summarized simulation results demonstrate that the foregoing properties of a jet engine are subject to considerable deterioration in pace with gradual increase of the assumed non-homogeneity of the temperature field, The simulations made it possible to find out that variations of the temperature field non-homogeneity within the working agent at the turbine intake lead to huge fluctuation of the turbine rpm for the idle run, which enables a new look to the role of the so-called idle run valve and importance of that component within the supply and control system of the SO-3 engine.
Źródło:
Journal of KONES; 2014, 21, 1; 205-213
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie zdalnie sterowanych modeli latających w inżynierii rolniczej
The use of remotely controlled flying models in agricultural engineering
Autorzy:
Cupiał, M.
Powiązania:
https://bibliotekanauki.pl/articles/291507.pdf
Data publikacji:
2009
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
model zdalnie sterowany
fotografia lotnicza
badanie polowe
remotely controlled model
aerial photography
field research
Opis:
Przedstawiono przykłady zastosowania modeli zdalnie sterowanych w badaniach związanych z inżynierią rolnicza. Modele zdalnie sterowanych helikopterów wykorzystane zostały do fotografowania obiektów, których w takim ujęciu nie dałoby się zobaczyć lub sfotografować innymi metodami.
The work presents examples for using remotely controlled models in agricultural engineering studies. Models of remotely controlled helicopters were used to take photographs of objects, which couldn't be seen or photographed from certain perspective using any other methods.
Źródło:
Inżynieria Rolnicza; 2009, R. 13, nr 6, 6; 31-36
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Penetrative convection due to absorption of radiation in a magnetic nanofluid saturated porous layer
Autorzy:
Mahajan, Amit
Sharma, Mahesh Kumar
Powiązania:
https://bibliotekanauki.pl/articles/178577.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
magnetic nanofluids
penetrative convection
Darcy model
radiation absorption
magnetic field
Opis:
The present study investigates the onset of penetrative convection induced by selective absorption of radiation in a magnetic nanofluid saturated porous medium. The influence of Brownian motion, thermophoresis, and magnetophoresis on magnetic nanofluid treatment is taken into consideration. The Darcy’s model is selected for the porous medium. We conduct a linear stability analysis to examine the onset of instability and evaluate the results for two different configurations, namely, when the layer is heated from below and when the layer is heated from above. The numerical investigations are carried out by applying the Chebyshev pseudospectral method. The effect of the porosity parameter E, parameter Y (represents the ratio of internal heating to boundary heating), Lewis number Le, concentration Rayleigh number Rn, Langevin parameter αL, width of nanofluid layer d, diffusivity ratio η, and modified diffusivity ratio NA is examined at the onset of convection. The results indicate that the convection commences easily with an increase in the value of Y, Le, and NA but opposite in the case with a decrease in the value of E, αL, η and d for both the two configurations. The parameter Rn advances the onset of convection when the layer is heated from below, while delays the onset of convection when the layer is heated from above.
Źródło:
Studia Geotechnica et Mechanica; 2019, 41, 3; 129-142
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigations of Topographic effect on radial current in South Yellow Sea
Autorzy:
Chen, C.
Wang, Y.
Huang, H.
Powiązania:
https://bibliotekanauki.pl/articles/259574.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
field survey
numerical model
topography
radial current
lagrangian residual current
Opis:
Large scaled projects are conducted in South Yellow Sea in recent years. Topographic effect and tidal current are key issues to the coastal engineering and the ocean engineering. In this study, field surveys were conducted to investigate the tidal level, current velocity, and current direction in South Yellow Sea. A numerical model was developed to simulate the radial current field based on the field data. To investigate the mechanism of the radial current field, the actual topography and a smoothed topography were applied in the numerical model, respectively. Results show that, the current field appeares radial because of the tidal system rather than the submarine topography. Local topography centralized the radiation centre and shifted the high-velocity zones. The actual topographic effect is proposed, and results show that local topography increases the flood tide velocity and decreases the ebb tide velocity. Lagrangian residual currents are calculated to illustrate possible sediment sources and transport routes.
Źródło:
Polish Maritime Research; 2017, S 3; 123-129
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda tworzenia modelu ziemskiego pola magnetycznego zoptymalizowanego dla obserwatora orientacji satelity
Method for creating earths magnetic field model optimized for satellite attitude observer
Autorzy:
Zagórski, P.
Powiązania:
https://bibliotekanauki.pl/articles/158761.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
Tematy:
ziemskie pole magnetyczne
satelita
model
CubeSat
Earth's magnetic field
satellite
Opis:
Jedna z metod określania orientacji przestrzennej małych satelitów orbitujących wokół Ziemi polega na jej odtwarzaniu poprzez porównywanie pomiarów pola magnetycznego oraz kierunku położenia słońca z odpowiednimi modelami. By było możliwe wykonywanie tego zadania w czasie rzeczywistym, modele takie muszą być wystarczająco dokładne, a jednocześnie nie mogą być zbyt kosztowne obliczeniowo. Niniejszy artykuł przedstawia sposób tworzenia dedykowanego modelu pola magnetycznego Ziemi, powstały przez redukcję bardziej złożonego jego odwzorowania. Rozwiązanie to zapewnia możliwość elastycznego dostosowania wymaganej dokładności przy jednoczesnej redukcji kosztu obliczeniowego.
One of the methods of determining orientation of a small satellite orbiting Earth is based on recreating spacecraft's orientation from comparison of measured magnetic field vector and Sun position with their respective models. To achieve this in real-time regime it is necessary that those models have sufficient precision and are relatively easy to compute. In this paper a methodology of creating Earth magnetic field model will be proposed. It will be shown that by reducing more complex model and optimizing its parameters it is possible to achieve adjustable precision with simultaneous reduction of computational cost.
Źródło:
Prace Instytutu Elektrotechniki; 2012, 260; 45-56
0032-6216
Pojawia się w:
Prace Instytutu Elektrotechniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Лобізм і теоретичні моделі політичної комунікації
Lobbing i teoretyczne modele komunikacji politycznej
Autorzy:
Годний, Сергій
Powiązania:
https://bibliotekanauki.pl/articles/489448.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Naukowe w Żytomierzu
Tematy:
lobbying
political field
political communication
political communication model
communicative influence
Opis:
The article highlights the importance of lobbying in conditions of modern Ukraine. The objective necessity of its existence in the society is shown. In conditions, when the state cannot sufficiently satisfy the interests of various social strata, layers and groups, this role is taken over by lobbying. The growth of its role in the society changes the vector pf democracy transformation form civic representation to representation of interests of social groups. The article determines that today lobbying is one of the key mechanisms of development and political decisionmaking; it is a considerable and efficient force, which influences the state authorities and institutions. The efficiency of lobbying depends on the level of its actual implementation. The article reveals that the phenomenon of lobbying is in a fact a communicative phenomenon as lobbyists and government representatives use various communicative resources. The author interprets the term of “political communication” as the process of transfer, exchange of political information, which shapes the political activity and gives it a new sense, forms public opinion and is part of political socialization of the citizens with the consideration of their needs and interests. It is emphasized that today communication plays the role of the main resource of the authorities. All the resources are influenced by communication. Any message, any information exchange implies some form of resources exchange. The author analyses various models of political communication described by H. Lasswell, M. DeFleur, J. Bordewijk, B. van Kaam, J.-M. Cotteret. Is has been determined, that of all the existing communication models, there was no model designed specifically for the analysis of communication lobbying. The presented models of political communication may describe the lobbyist contact as a process, but they all are narrowed to transfer of information, significant for political system functioning. It has been emphasized that contemporary communication theories transfer of information is crystalized into the so-called transmission model of communication. This model remains basic for the formation of understanding the nature of political communication. The study determines that in the context of the research, J.-M. Cotteret’s model is the most appropriate way to determine the peculiarities of lobbying in the Ukrainian society. It most accurately corresponds to the realities of Ukraine, which is sometimes called “oligarch economy”. This is a particular form of structural connection between the oligarch layer of the society and its economy (also through lobbying the economic interests of oligarchs). The specifics of the Ukrainian lobbying model lies in the fact that there is a total economic dependency of party circles, which may be seen both at the nation and local levels. It is emphasized that the key feeding source of oligarchy is parasitizing on the economic body of the state. That is why Ukrainian oligarchy received the name of “carnival-parasitizing”. And, unfortunately, corruption remains the main interaction mechanism between the power and the big business. The author determines the current problems of the lobbying process in Ukraine. Firstly, the national legislation has no clear definition of such terms as “corruption” and “lobbying” as a form of interaction between the authorities and the interested party. The issue of lobby legalization still remains an important issue as well as the necessity of establishment of legal and lobbying principles to ensure the legitimacy of its functioning. It has been suggested to develop the methodology of carrying out the political and legal expert evaluation of draft projects and to adopt it in the form of a legal act. The necessity of ensuring the transparency of the lobbying process improving the order of drafting and deliberation of legislation at the plenary sessions of the Ukrainian parliament are emphasized.
Źródło:
Studia Politologica Ucraino-Polona; 2018, 8; 193-198
2312-8933
Pojawia się w:
Studia Politologica Ucraino-Polona
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Temperature distribution in multi domain construction of the permanent magnet linear actuator
Autorzy:
Tomczuk, B.
Waindok, A.
Powiązania:
https://bibliotekanauki.pl/articles/140715.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
linear actuators
thermal field models
heating curves calculation
finite element model
Opis:
The transient thermal model of the permanent magnet linear actuator (PMLA) has been considered. The characteristics of heating have been calculated including the main subdomains of the actuator. The carcasses from various materials have also been considered. The calculations have been verified experimentally and a good conformity was obtained.
Źródło:
Archives of Electrical Engineering; 2013, 62, 3; 417-424
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Teoretyczny i rzeczywisty rozkład cieczy dla wybranych parametrów ustawienia rozpylacza
Theoretical and actual liquid distribution for selected atomiser setting parameters
Autorzy:
Szewczyk, A.
Wilczok, G.
Powiązania:
https://bibliotekanauki.pl/articles/291961.pdf
Data publikacji:
2007
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
technika opryskiwania
uprawa polowa
rozkład cieczy
model matematyczny
sprying technique
field crops
liquid distribution
mathematical model
Opis:
Opracowano matematyczny model ruchu cząsteczki rozpylanej cieczy składający się z układu trzech równań. Do weryfikacji wyznaczonego modelu skonstruowano specjalne stanowisko badawcze na którym uzyskiwano rozkład podłużny cieczy dla przyjętych do badań parametrów pracy rozpylacza. Otrzymane wyniki rozkładów rzeczywistych rozpylonej cieczy porównane zostały z rozkładami uzyskanymi z obliczeń modelowych. Porównanie wyników badań laboratoryjnych rozkładów rozpylonej cieczy oraz wyników obliczeń teoretycznych wykazało duże podobieństwo.
The researchers developed mathematical model describing motion of atomised liquid molecule, consisting of a system of three equations. Special testing station was designed in order to verify the determined model, which allowed to obtain liquid longitudinal distribution for atomizer working parameters taken for the tests. Obtained results showing actual distributions of atomized liquid were compared to the distributions obtained from model computations. Comparison of the results obtained during laboratory tests of atomised liquid distributions and the results of theoretical computations proved high similarity of both.
Źródło:
Inżynieria Rolnicza; 2007, R. 11, nr 8 (96), 8 (96); 265-272
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of explosion stress field of air radial decoupling charge
Autorzy:
Yang, Deqiang
Lei, Zhen
An, Huaming
Powiązania:
https://bibliotekanauki.pl/articles/1402294.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Wydział Geoinżynierii, Górnictwa i Geologii. Instytut Górnictwa
Tematy:
air radial decoupling charge
explosion stress field
concrete model
numerical simulation
Opis:
In order to study the effect of air radial decoupling charge on blasting excavation effect of slope, the effect of radial decoupling coefficient on explosive stress field in rock mass is analyzed theoretically. ANSYS/LS-DYNA software is used to establish a numerical model for stress monitoring of monitoring points. At the same time, the concrete model is poured, the explosion stress field around the blast hole is measured by means of the high-speed multi-channel dynamic stress testing system, and the monitoring results of the two methods are compared with the theoretical analysis results. The results show that with the increase of the radial decoupling coefficient of blasting, the peak value of explosive stress at the same side point decreases obviously, and with the increase of the distance, the stress attenuation becomes slower. Applying the test results to the blasting of slope, it is found that the blasting effect is the best when the aperture decoupling coefficient is 2.75 and the hole spacing is 1.0 m, and the larger the hole spacing is, the less obvious the blasting crack is, which has certain guiding significance for improving the blasting effect.
Źródło:
Mining Science; 2020, 27; 19-38
2300-9586
2353-5423
Pojawia się w:
Mining Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Сфера бизнеса в лингвокогнитивных мо-делях социума
Business sphere in linguocognitive models of society
Autorzy:
Kilewaja, Ludmiła
Sternal, Elżbieta
Powiązania:
https://bibliotekanauki.pl/articles/523611.pdf
Data publikacji:
2018-11-26
Wydawca:
Uczelnia Lingwistyczno-Techniczna w Świeciu
Tematy:
biznes
kognitywny model
socjoekonomiczny tezaurus
socjalny dyskurs
asocjatywne pole
business
cognitiv model
thesaurus
social discurs
associative field
Opis:
W artykule zostaje poruszony problem społecznego kontekstu, w którym przebiega i rozwija się biznes. Na znaczącą część tego kontekstu składają się kognitywne modele, oparte na wiedzy i percepcji biznesu przez ludzi, bezpośrednio nie biorących w nim udziału. Faktyczny materiał badań został zgromadzony przez użycie metody psycholingwistycznej pod postacią asocjatywnego eksperymentu. Wzięły w nim udział 62 osoby, mające wyższe i średnie wykształcenie, głównie nauczyciele i wykładowcy państwowych i prywatnych uczelni. Autorki wprowadzają termin socjoekonomiczny tezaurus. Wychodzą z założenia, że kognitywne modele stają się źródłem dyskursu społecznego i tą drogą wywierają istotny wpływ na przebieg i rozwój biznesu. Przedstawione w artykule kognitywne modele są skonstruowane na podstawie analizy reakcji na słowo-bodziec biznes. U przeciętnego mieszkańca społeczeństwa kojarzy się on przede wszystkim z pieniędzmi, ciężką pracą i nieobecnością czasu dla siebie i bliskich. Przeprowadzona analiza pozwoliła ujawnić związek wzajemnych i współzależnych modeli kognitywnych i komponentów dyskursu, a także skonstruować asocjatywne pole i schematycznie przedstawić ramy, skrypty i gesztalty jako kognitywne modele tezaurusu socjoekono-micznego. Konstrukcja aspektów funkcjonowania biznesu została opracowana na podstawie analizy dyskursu z pozycji społecznego konstruktywizmu. Zdobyte wyniki świadczą o pozytywnym imidżu biznesu jako ekonomicznego fenomenu w społeczeństwie.
The article takes up the problem of social context in which business operates and develops. Meaningful part of this context is constituted by cognitive models formed on the basis of knowledge and business perception of the people who are not directly involved in it. Research material was gathered through the use of psycholinguistic method in the form an associative experiment. 62 persons participated in it, representing academic or higher secondary education: mainly lecturers and teachers of state and private institutions of higher learning. The authors introduce the term socioeconomic thesaurus. They assume that cognitive models become a source of social discourse and, in this way, exert substantial influence on the functioning and development of business. The cognitive models expounded in the article are constructed on the basis of analysis of reaction to the word-stimulus business. An average society member associates the word primarily with money and lack of time in private life. The conducted analysis allowed to show connection of mutual and interdependent cognitive models and components of the discourse. It also allowed to construct the associative field and to give a schematic presentation of frames, documents and geshtalts as cognitive models of socialeconomic thesaurus. The construction of aspects of business functioning was worked out on the basis of discourse-analysis from the point of view of social constructivism. The obtained results testify to positive attitude to business image as the economic phenomenon in the society.
Źródło:
humanistica 21; 2018, 2; 149-168
2544-1345
Pojawia się w:
humanistica 21
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Functional verification of working section for Strip-Till cultivation
Weryfikacja funkcjonalna sekcji roboczej do uprawy pasowej
Autorzy:
Talarczyk, W.
Szulc, T.
Szczepaniak, J.
Łowiński, Ł.
Pikosz, M.
Powiązania:
https://bibliotekanauki.pl/articles/334945.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
research model
strip-till cultivation
working section
field test
model badawczy
uprawa pasowa
sekcja robocza
badanie polowe
Opis:
The paper presents research results of working section for Strip-Till cultivation, developed in a project PBS1/B8/4/2012 conducted under the Applied Research Programme. Working section is composed of several working elements which pre-pare the row of soil for sowing. The purpose of the study was to verify the functional aspect of the working section in the field.
Przedstawiono wynika badań sekcji roboczej do uprawy pasowej opracowanej w projekcie PBS1/B8/4/2012 realizowanym w ramach Programu Badań Stosowanych. Sekcja składa się z kilku elementów roboczych, które przygotowują pas gleby pod siew, a celem badań była jej weryfikacja funkcjonalna w warunkach polowych.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2014, 59, 4; 103-106
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal influences on turbogenerator dynamic behaviour
Wpływ temperatury na dynamiczne zachowanie turbogeneratora
Autorzy:
Jevtić, M.
Zeljković, V.
Dapić, M.
Powiązania:
https://bibliotekanauki.pl/articles/320316.pdf
Data publikacji:
2006
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
turbogenerator
nierównowaga termiczna
pole temperaturowe
model matematyczny
program komputerowy
thermal unbalance
temperature field
mathematical model
computer program
Opis:
Temperature fields in electric energy generation may lead to the mechanical disbalance of an already balanced rotor. The authors collected information in a number of Serbian steam power plants and they realized the existence of the problem. On the grounds of the relevant physical aspects they propose a mathematical model for identifying temperature fields in a turbo-generator rotor, and they suggest the optimum control by which the unwanted effects are eliminated.
Pole temperaturowe w wytwarzaniu energii elektrycznej może prowadzić do nierównowagi mechanicznej wirnika będącego w stanie równowagi. Autorzy zebrali informacje w wielu elektrowniach cieplnych na terenie Serbii i stwierdzili istnienie tego problemu. Biorąc pod uwagę istotne czynniki fizyczne zaproponowano model matematyczny dla celów identyfikacji pól temperaturowych w wirniku turbogeneratora i na jego podstawie dobrano sposób sterowania optymalny ze względu na eliminacje niepożądanych zjawisk.
Źródło:
Elektrotechnika i Elektronika; 2006, 25, 2; 157-161
1640-7202
Pojawia się w:
Elektrotechnika i Elektronika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Germination of wheat grain in an alternating magnetic field
Autorzy:
Pietruszewski, S.
Kornarzynski, K.
Lacek, R.
Powiązania:
https://bibliotekanauki.pl/articles/25028.pdf
Data publikacji:
2001
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
magnetic field
development
wheat grain
pre-sowing period
mathematical model
seed
germination
Źródło:
International Agrophysics; 2001, 15, 4
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of suitability for development of new mining field in northern part of Kosovo lignite basin - Sibovc
Analiza możliwości udostępnienia nowego obszaru wybierania w północnej części zagłębia węgla brunatnego Sibovc w Kosowie
Autorzy:
Cehlar, M.
Rybar, R.
Pinka, J.
Haxhiu, L.
Beer, M.
Powiązania:
https://bibliotekanauki.pl/articles/220108.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
obszar wybierania w Sibovc
Republika Kosowo
lignit
model geologiczny
Sibovc mining field
Republic of Kosovo
lignite
geological model
Opis:
This review describes the possibility of development a new lignite deposit in northern Kosovo lignite basin - Sibovc. Analysis of the initial state briefly evaluates Kosovo energy sector, geomorphological conditions and quality of lignite from Sibovc deposit. With using Dataminesoft it was created geological model and approximate calculation of lignite reserves in the deposit. The data obtained from Dataminesoft were used as starting points of the financial analysis of project. The result of the analysis is exactly describe the qualitative and quantitative characteristics of deposit Sibovc compared to other deposits in the area and creating of geological model with productive horizons deposit of lignite. Based on these data lignite deposit Sibovc was classified, according to the classification of deposits the UN, as economical.
W pracy tej omówiono możliwości udostępnienia nowego obszaru wybierania złoża węgla brunatnego (lignitu) w północnej części zagłębia węgla brunatnego Sibovc w Kosowie. W analizie stanu początkowego krótko scharakteryzowano sektor energetyczny Kosowa, warunki geo-morfologiczne oraz parametry jakościowe węgla brunatnego z zagłębia Sibovc. Przy pomocy pakietu Dataminesoft stworzono model geologiczny i przeprowadzono przybliżone obliczenia zasobów węgla brunatnego w złożu. Dane uzyskane przy zastosowaniu pakietu Dataminesoft zostały następnie wykorzystane jako dane wejściowe do analizy finansowej przedsięwzięcia. Na podstawie wyników analizy uzyskuje się jakościową i ilościową charakterystykę złoża w odniesieniu do pozostałych złóż w regionie. Opracowano model geologiczny ze szczegółowym wskazaniem poziomów wybierania lignitu. W oparciu o te dane dokonano klasyfikacji złoża węgla brunatnego (lignitu) w Sibovc zgodnie z międzynarodowymi zasadami klasyfikacji wykazując, że złoże będzie ekonomiczne.
Źródło:
Archives of Mining Sciences; 2013, 58, 2; 557-568
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laminar field optimization in connection with the current pandemic situation caused by COVID-19
Optymalizacja z wykorzystaniem pola laminarnego w odniesieniu do obecnej sytuacji pandemicznej spowodowanej przez COVID-19
Autorzy:
Hrnková, Bronislava
Hečko, Dávid
Kapjor, Andrej
Mičko, Pavol
Vantúch, Martin
Powiązania:
https://bibliotekanauki.pl/articles/2055095.pdf
Data publikacji:
2021
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
laminar field
clean room
air flow
CFD model
outlet
pole laminarne
czyste pomieszczenie
przepływ powietrza
model CFD
wywiew
Opis:
COVID-19 is constantly spreading around the world. Doctors, nurses and medical staff spend more time providing their professional help than usual. It is especially important to provide them with a suitable working environment. Therefore, in the following article we will deal with the design of a computational model of a laminar field in a clean room using CFD methods.
COVID-19 nieustannie rozprzestrzenia się w świecie. Lekarze, pielęgniarki i personel medyczny spędzają więcej czasu niż zwykle niosąc profesjonalną pomoc. Jest zatem szczególnie istotne, aby zapewnić im odpowiednie środowisko pracy. Dlatego też w prezentowanym artykule zajęto się zaprojektowaniem modelu komputerowego pola laminarnego w czystym pomieszczeniu z wykorzystaniem metod CFD.
Źródło:
Structure and Environment; 2021, 13, 1; 5--9
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Calculation for Acoustic Radiation Force from Rectangular Weakly Focusing Transducer Using the Ray Acoustic Model
Autorzy:
Yu, Lili
Qiao, Shuchang
Shou, Wende
Li, Junhua
Powiązania:
https://bibliotekanauki.pl/articles/2141691.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
radiation force calculation
ray acoustic model
rectangular weakly focusing transducer
far-field integration
Opis:
Based on the ray acoustic model, a new relationship between the radiation force and the acoustic power is studied for a rectangular weakly focusing transducer. The effect of pressure reflection coefficient on this model is discussed. For a totally absorbing target, an approximate closed-form expression is also derived and the performance of this model is compared with that of the far-field integration model. The numerical results show that the agreement is excellent with these two models, which can be both used for correction of measured results, but the formula based on the ray acoustic model can be applied more widely in practice because of its simpler expression. The experimental results show further the effectiveness of the relationship between radiation force and acoustic power for rectangular weakly focusing transducer based on the ray acoustic model. The results presented in this paper are important for application of ultrasound transducers in therapy.
Źródło:
Archives of Acoustics; 2022, 47, 1; 81-88
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vehicle-deck fires aboard RoPax ships: a comparison between numerical modelling and experimental results
Autorzy:
Salem, Ahmed
Powiązania:
https://bibliotekanauki.pl/articles/259491.pdf
Data publikacji:
2019
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
vehicle-deck fires
RoPax ships
zone models
field models
model-scale fire tests
Opis:
According to an official study conducted by the IMO Correspondence Group on Casualty Analysis concerning the fire incidents that occurred on the vehicle-decks of RoPax ships, covering the period from 1994 to 2011, it has been shown that a very serious incident has occurred every other year since 2002, resulting in six constructive total losses. The results of this review shed the light on the need to investigate the application of fire models to simulate fire scenarios that may occur on the vehicle-decks aboard RoPax ships. This will be very useful for the RoPax designers who are willing to introduce new technologies or deviate from the current prescriptive regulations of fire safety design in order to reduce the risk of such catastrophic accidents. The aim of this paper is to present the results of a comparison between the predictions of three different fire models and the experimental results of a model-scale fire test that represents a fire scenario on a vehicle-deck aboard a RoPax ship. A statistical analysis technique was used to illustrate the ability of each fire model to predict five outputs of concern. The main conclusion of this comparison is that there is always an optimal fire model that can predict one or more of the five outputs of concern with results in good agreement with the measured values.
Źródło:
Polish Maritime Research; 2019, 2; 155-162
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical modeling of magnetic stray fields defects ferromagnetic products
Matematicheskoe modelirovanie magnitnykh polejj rassejanija defectov ferromagnitnykh izdelijj
Autorzy:
Bezkorovaynyy, V.
Ivanovskij, P.
Yakovenko, V.
Powiązania:
https://bibliotekanauki.pl/articles/791958.pdf
Data publikacji:
2013
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
mathematical modelling
magnetic field
defect
ferromagnetic product
numerical solution
integral equation
geometrical model
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2013, 13, 4
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ethological Changes and Teratogenesis of Model Organisms as an Indicator of Biotesting of the Electromagnetic Radiation Influence
Autorzy:
Wójcik, Waldemar
Kalizhanova, Aliya
Sakun, Oksana A.
Nykyforov, Volodymyr V.
Nykyforova, Larysa E.
Nahorniak, Svitlana V.
Kistion, Volodymyr Ev.
Shevchenko, Liudmyla S.
Yesmakhanova, Laura
Junisbekov, Mukhtar
Orazbekov, Zhaslan
Turgantarova, Aigul
Powiązania:
https://bibliotekanauki.pl/articles/2173307.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
biotesting
ecological safety
electromagnetic radiation
magnetic field
model organism
activity level
teratogenesis
mortality
Opis:
With the development of information technology, electromagnetic radiation becomes a tangible view of the physical (wave) environmental pollution. Modern scientific research aimed at the components of the elec tromagnetic environment pollution problems mainly involves the anthropocentric approach. There is no procedure for determining the influence of harmful physical factors on biota, in particular in terms of water (Daphnia magna Straus) and air (Drosophila melanogaster L.) environments. A clear system of rationing of maximum permissible levels of electromagnetic radiation, including volume and ecosystems protected areas has not been developed. The article considers the relevant scientific and practical problem of creating a framework for assessing and predicting the negative impact of electromagnetic radiation on the biota related to ethological changes and teratogenesis. The characteristic of all the constituent elements of the system determines the degree of the negative impact of the induction of the magnetic field on the biota: activity, mortality; reproduction; availability, and frequency of Teratology. A method for determining the activity levels of Daphnia and Drosophila total average activity biota was developed and described. The trajectory patterns of Daphnia motion at low activity in the state of stability, with increased activity in the excited state, were created. The results of the research on the negative impact of electromagnetic radiation of industrial frequency on biota were presented. The critical levels of the magnetic field and noise pollution, which cause the depletion and destruction of the test object, the relationship between ethological changes and the occurrence of mutations depending on radiation levels were determined. The biological test objects were proven to minimize the error of the results of determination of electromagnetic effects on the biota, in comparison with the mathematical methods of research.
Źródło:
Journal of Ecological Engineering; 2022, 23, 7; 42--49
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Using 1D and 2D computer models when predicting hydrodynamic and morphological parameters of a boulder block ramp: Poniczanka stream, Carpathians
Autorzy:
Plesiński, Karol K.
Radecki-Pawlik, Artur
Rivera-Trejo, Fabian
Powiązania:
https://bibliotekanauki.pl/articles/2203562.pdf
Data publikacji:
2022
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
boulder blocks ramps
low head hydraulic structures
field measurement
hydraulics
riverbed morphology
HEC-RAS model
CCHE2D model
Opis:
When modelling flow and/or sediment transport in streams and rivers, one must frequently use the computer software of differing levels of complexity. The level of sophistication, accuracy, and quality of results are the parameters by which models can be classified as being 1D, 2D, or 3D; it seems certain that in the future, there will also be 4D and 5D models. However, the results obtained from very sophisticated models are frequently questionable, and designers in the field of hydraulic structures must have considerable experience distinguishing important information from irrelevant information. Thus, this paper aims to investigate the effect of the selected boulder block ramp hydraulic structure at Poniczanka stream on the bed-load transport. We evaluated sediment transport using the CCHE2D numerical model. We analysed several scenarios depending on the river bed type (erodible, non-erodible, rocky) and examined the rock blocks used for hydraulic structure construction. The obtained results were compared with the Hjulström and the Shields graph, which are a classic approach for identifying fluvial processes in river channels. In addition to these two methods, numerical modelling using the 1D HEC-RAS (Hydrologic Engineering Center’s River Analysis System) modelling were conducted, which included the determination of horizontal and vertical changes to the river bed morphology of the examined section of river reach as well as providing the basic hydrodynamics parameters which, from the practical point of view, designers involved in the process of designing ramps could use.
Źródło:
Journal of Water and Land Development; 2022, Special Issue; 34--48
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza wpływu zużywania na ustalone pole temperatury pary tarciowej
Analysis of the impact of wear on the stable temperature field of a friction couple
Autorzy:
Kochanek, H.
Sadowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/189868.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pole temperatury
zużycie tarciowe
modele procesów cieplnych
temperature field
friction wear
thermal processes model
Opis:
Prezentowane w literaturze przedmiotu modele procesów cieplnych spowodowanych tarciem zbudowane są na założeniu równości pracy i ciepła tarcia. Uproszczenie takie jest uzasadnione niewielkim, najczęściej kilkuprocentowym udziałem w bilansie energii składowej potrzebnej do tworzenia się produktów zużycia. W pracy [L. 1] autorzy wykazali istotny wpływ tego udziału na niestacjonarne pole temperatury elementów modelowej pary tarciowej, którą stanowiły dwie półnieskończone rury cienkościenne wymieniające ciepło z otoczeniem. Niniejsza praca nawiązuje do pracy [L. 1] i poświęcona jest analizie stacjonarnych procesów cieplnych w elementach systemu tribologicznego również przy założeniu, że część pracy tarcia powoduje zużywanie. Dodatkowo uwzględniono skończone długości rur cienkościennych. Wybór do analizy pary tarciowej z liniowym polem temperatury został podyktowany potrzebą uzyskania przejrzystej interpretacji wyników. Ustalono temperaturę styku tarciowego i rozkłady temperatury w poszczególnych rurach. Uwzględniono własności fizyczne materiałów, warunki wymiany ciepła z otoczeniem i niektóre cechy geometryczne trących się elementów. W celu zilustrowania wpływu zużywania na pola temperatury przybliżono także model trących się rur cienkościennych, oparty na założeniu o równości między pracą i ciepłem tarcia. Następnie porównano ze sobą oba modele. Przykłady obliczeniowe wykonano, stosując programy komputerowe Delphi i Excel. Wykazano, że zużywanie przyczynia się istotnie do zmniejszenia temperatury w poszczególnych punktach analizowanej pary tarciowej.
The article investigates the models of the heat processes due to friction were constructed based the assumption of equality of work and the friction heat. Such a simplicity is justified by a small (most often a few percentage) share in the power balance of the power component is needed to create wear products. In publication [L. 1], the authors showed the significant effect of this small share on the non-stationary temperature field of the elements of the model friction couple, which were two half-non-finite, thin-walled tubes that exchange heat with the environment. This study refers to study [L. 1] and is dedicated to analyse the stationary heat processes in elements of a tribological system with the assumption that part of the friction work causes the wear. Additionally, finite lengths of the thin-walled tubes were considered. The selection of the friction couple of the linear field of temperature was governed by the need to obtain a transparent interpretation of the results. The temperature in friction contact and the temperature distributions in individual tubes were determined. In this study, the following was taken into account: the physical properties of materials, the conditions of heat exchange with the environment, and some of geometrical features of friction elements. In order to illustrate the impact of wear on the temperature fields, the assumption of the equality of work and friction heat in the model of friction thin-wall tubes was done. Then, two models were compared. Examples of calculations were performed using Delphi and Excel software. The calculations indicate that wear contributes significantly to lower temperatures at particular points of the analysed friction couple.
Źródło:
Tribologia; 2015, 1; 49-63
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zagadnienie wpływu zużycia na pole temperatury pary tarciowej
The issue of the influence of wear on the temperature field of a friction couple
Autorzy:
Kochanek, H.
Sadowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/187907.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
pole temperatury
zużycie tarciowe
modele procesów cieplnych
temperature field
friction wear
thermal processes model
Opis:
Próby określenia pola temperatury w elementach pary tarciowej były podejmowane w licznych pracach eksperymentalnych i teoretycznych. Bezpośrednie badania temperatury uwzględniają realne warunki cieplne, informując jedynie wycinkowo o polu tej temperatury. Z kolei znane modele nagrzewania tarciowego ciał stałych opierają się na założeniu o równości pracy i ciepła tarcia. Oznacza to pomijanie w prowadzonych rozważaniach energii rozpraszanej również wskutek zużywania. W niniejszej pracy podjęto próbę uogólnienia modelu procesów cieplnych spowodowanych tarciem poprzez uwzględnienie straty energii na zużywanie. Aby uzyskać przejrzystą i jednoznaczną interpretację wyników rozważań, przedstawiono parę tarciową z liniowym rozkładem temperatury w jej elementach w postaci rur cienkościennych zetkniętych ze sobą czołowo. Opisano temperaturę styku tarciowego i rozkłady temperatury w poszczególnych rurach. Uwzględniono własności fizyczne materiałów, warunki wymiany ciepła z otoczeniem, czas tarcia, zużywanie i niektóre cechy geometryczne trących się elementów. W celu zilustrowania wpływu zużywania na pola temperatury przybliżono także model trących się rur cienkościennych, oparty na założeniu o równości między pracą i ciepłem tarcia. Następnie porównano ze sobą oba modele. Przykłady obliczeniowe wykonano, stosując programy komputerowe Delphi i Excel. Stwierdzono istotny wpływ zużywania na przebieg procesów cieplnych. Przejawia się to jako zmniejszenie temperatury styku tarciowego, której wartość nie może przekroczyć wartości temperatury błysku. Zamieszczone przykłady ilustrują także wpływ chłodzenia i własności fizycznych trących się materiałów na pola temperatury w parze tarciowej.
Trials for the identification of the temperature field of friction couple elements have been made in numerous experimental and theoretical researches. The direct investigation of temperature taking into consideration the actual thermal condition give only partial information about that temperature field. On the other hand, well-known models of the frictional warming of solids are based on the equality assumption of friction work and heat. This means that, during consideration, the models' authors have ignored the energy dissipation that was caused by wear. This article presents the model generalisations of thermal processes caused by friction, which take into consideration the losses of energy due to wear. To obtain a clear and unambiguous interpretation of the results, a pair of friction elements that have linear temperature distribution was presented in the form of thin-walled pipes of face contact. The temperature of friction contact and the distribution of temperature in individual pipes are described. The authors took into account the following: physical properties of materials, conditions of heat exchange with the environment, the time of friction, wear, and some geometrical characteristics of rubbing parts. In order to illustrate the impact of wear on the temperature field, the model of rubbing thin-walled tubes, based on the assumption of the equality between work and the heat of friction was used. Then the presented models are compared. Computational examples are developed with the use of Delphi and Excel programs. The significant influence of wear on the course of thermal processes is presented. This is reflected as a reduction in frictional contact temperature, whose value can not exceed the flash temperature. The examples illustrate the impact of cooling and the physical properties of the frictional materials on the temperature field of the friction pair.
Źródło:
Tribologia; 2012, 1; 73-84
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on gravity field modelling and gravimetry in Poland in 2015–2018
Autorzy:
Krynski, Jan
Dykowski, Przemysław
Olszak, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/145412.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pole grawitacyjne
grawimetria
geoida
gravity field
gravimetry
global geopotential model
geoid
absolute gravity measurements
Opis:
Activities of the Polish research gSDroups concerning gravity field modelling and gravimetry in a period of 2015–2018 are reviewed and summarised in this paper. The summary contains the results of research on the evaluation of GOCE-based global geopotential models (GGMs) in Poland and geoid modelling. Extensive research activities are observed in the field of absolute gravity surveys, in particular for the maintenance of national gravity control in Poland, Sweden, Denmark, the Republic of Ireland and in Northern Ireland as well as for geodynamics with special emphasis on metrological aspects in absolute gravimetry. Long term gravity variations were monitored in two gravimetric laboratories: the Borowa Gora Geodetic-Geophysical Observatory, and Jozefoslaw Astrogeodetic Observatory with the use of quasi-regular absolute gravity measurements as well as tidal gravimeter records. Gravity series obtained were analysed considering both local and global hydrology effects. Temporal variations of the gravity field were investigated using data from GRACE satellite mission as well as SLR data. Estimated variations of physical heights indicato the need for kinematic realization of reference surface for heights. Also seasonal variability of the atmospheric and water budgets in Poland was a subject of investigation in terms of total water storage using the GLDAS data. The use of repeatable absolute gravity data for calibration/validation of temporal mass variations derived from satellite gravity missions was discussed. Contribution of gravimetric records to seismic studies was investigated. The bibliography of the related works is given in references.
Źródło:
Geodesy and Cartography; 2019, 68, 1; 31-63
2080-6736
2300-2581
Pojawia się w:
Geodesy and Cartography
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Non-uniformity of the combustor exit flow temperature in front of the gas turbine
Autorzy:
Błachnio, J.
Pawlak, W.
Powiązania:
https://bibliotekanauki.pl/articles/386460.pdf
Data publikacji:
2014
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
gas turbine
blade
simulation model
working agent temperature field
health/maintenance status
turbina gazowa
łopatka turbiny
model symulacyjny
warunki techniczne
Opis:
Various types of damages to gas-turbine components, in particular to turbine blades, may occur in the course of gas turbine operation. The paper has been intended to discuss different forms of damages to the blades due to non-uniformity of the exit flow temperature. It has been shown that the overheating of blade material and thermal fatigue are the most common reasons for these damages. The paper presents results from numerical experiments with use of the computer model of the aero jet engine designed for simulations. The model has been purposefully modified to take account of the assumed non-homogeneity of the temperature field within the working agent at the turbine intake. It turned out that such non-homogeneity substantially affects dynamic and static properties of the engine considered as an object of control since it leads to a lag of the acceleration time and to increase in fuel consumption. The summarized simulation results demonstrate that the foregoing properties of a jet engine are subject to considerable deterioration in pace with gradual increase of the assumed non-homogeneity of the temperature field. The simulations made it possible to find out that variations of the temperature field nonhomogeneity within the working agent at the turbine intake lead to huge fluctuation of the turbine rpm for the idle run.
Źródło:
Acta Mechanica et Automatica; 2014, 8, 4; 209-213
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model matematyczny mocy efektywnej toporowego zespołu tnącego wyposażonego w elementy wspomagające rozdrabnianie roślin
Mathematical model for effective power of a flywheel cutting unit equipped with elements supporting plant shredding process
Autorzy:
Lisowski, A.
Wardecki, P.
Kostyra, K.
Świątek, K.
Powiązania:
https://bibliotekanauki.pl/articles/290270.pdf
Data publikacji:
2008
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
sieczkarnia polowa
model matematyczny
rozdrabnianie roślin
toporowy zespół tnący
field chaff cutter
mathematical model
plant shredding process
flywheel cutting unit
Opis:
Celem pracy było określenie wpływu dodatkowych elementów wspomagających rozdrabnianie roślin na nakłady energetyczne, poniesione przez toporowy zespół tnący sieczkarni polowej wyposażony w dodatkowe elementy robocze. Opracowano model teoretyczny do określenia zapotrzebowania mocy efektywnej zespołu tnącego z dodatkowymi elementami roboczymi. Struktura modelu odzwierciedla zidentyfikowane zjawiska (w tym również nowe), związane z cięciem roślin przez noże zespołu tnącego, odrzuceniem odciętych roślin na powierzchnię obudowy zespołu, które było wspomagane przez listwy promieniowe, tarciem na tej powierzchni obudowy oraz na powierzchni karbowanych płytek dennych, ściskaniem cząstek roślin w szczelinie roboczej między płytką denną a łopatkami rzutnika oraz wyrzutem sieczki do kanału wyrzutowego sieczkarni polowej.
The purpose of the work was to determine the impact of extra elements supporting plant shredding on expenditure of power from flywheel cutting unit in field chaff cutter, equipped with additional working elements. A theoretical model was developed for the purposes of determining effective power demand of cutting unit with extra working elements. The model structure reflects identified phenomena (including new ones too) related to: plant cutting by cutting unit knives, rejection of cut off plants onto the unit housing surface (supported by radial strips), friction on this housing surface and on the surface of corrugated bottom plates, squeezing of plant pieces in a working gap between bottom plate and feeder beater blades, and chaff ejection to field chaff cutter ejection conduit.
Źródło:
Inżynieria Rolnicza; 2008, R. 12, nr 1(99), 1(99); 245-250
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Crystal electric field parameters determination for R2Fe14B compounds based on Yamada - Kato model
Autorzy:
Bogacz, B. F.
Pędziwiatr, A. T.
Powiązania:
https://bibliotekanauki.pl/articles/147342.pdf
Data publikacji:
2013
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
crystal electric field parameters
model Yamada-Kato
Mössbauer effect
permanent magnet materials
spin reorientation
Opis:
Semi-empirical model developed by Yamada-Kato enables calculation of magnetic spin directions for R2Fe14B compounds, based on minimization of free energy, and - in further steps - determination of spin reorientation temperatures for transitions from basal plane to axial easy magnetization direction. In our study, this model has been successfully used to determine crystal field and exchange field parameters for Er2-xCexFe14B compounds based on spin reorientation temperatures obtained experimentally from Mössbauer measurements.
Źródło:
Nukleonika; 2013, 58, 1; 31-33
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Field validation of DNDC and SWAP models for temperature and water content of loamy and sandy loam Spodosols
Autorzy:
Balashov, E.
Buchkina, N.
Rizhiya, E.
Farkas, C.
Powiązania:
https://bibliotekanauki.pl/articles/972349.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
field validation
agroecosystem
modelling
soil water content
soil temperature
DNDC model
SWAP model
temperature
water content
loamy sand
sandy loam
Spodosol
Opis:
The objectives of the research were to: fulfil the preliminary assessment of the sensitivity of the soil, water, atmosphere, and plant and denitrification and decomposition models to variations of climate variables based on the existing soil database; validate the soil, water, atmosphere, and plant and denitrification and decomposition modelled outcomes against measured records for soil temperature and water content. The statistical analyses were conducted by the sensitivity analysis, Nash-Sutcliffe efficiency coefficients and root mean square error using measured and modelled variables during three growing seasons. Results of sensitivity analysis demonstrated that: soil temperatures predicted by the soil, water, atmosphere, and plant model showed a more reliable sensitivity to the variations of input air temperatures; soil water content predicted by the denitrification and decomposition model had a better reliability in the sensitivity to daily precipitation changes. The root mean square errors and Nash-Sutcliffe efficiency coefficients demonstrated that: the soil, water, atmosphere, and plant model had a better efficiency in predicting seasonal dynamics of soil temperatures than the denitrification and decomposition model; and among two studied models, the denitrification and decomposition model showed a better capability in predicting the seasonal dynamics of soil water content.
Źródło:
International Agrophysics; 2014, 28, 2
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies