Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "field model" wg kryterium: Temat


Tytuł:
Modeling of Eutectic Formation in Al-Si Alloy Using A Phase-Field Method
Autorzy:
Ebrahimi, Z.
Powiązania:
https://bibliotekanauki.pl/articles/353792.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
phase-field model
Al-Si alloy
eutectic growth
fluctuations
Opis:
We have utilized a phase-field model to investigate the evolution of eutectic silicon in Al-Si alloy. The interfacial fluctuations are included into a phase-field model of two-phase solidification, as stochastic noise terms and their dominant role in eutectic silicon formation is discussed. We have observed that silicon spherical particles nucleate on the foundation of primary aluminum phase and their nucleation continues on concentric rings, through the Al matrix. The nucleation of silicon particles is attributed to the inclusion of fluctuations into the phase-field equations. The simulation results have shown needle-like, fish-bone like and flakes of silicon phase by adjusting the noise coefficients to larger values. Moreover, the role of primary Al phase on nucleation of silicon particles in Al-Si alloy is elaborated. We have found that the addition of fluctuations plays the role of modifiers in our simulations and is essential for phase-field modeling of eutectic growth in Al-Si system. The simulated finger-like Al phases and spherical Si particles are very similar to those of experimental eutectic growth in modified Al-Si alloy.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 4; 1969-1981
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of Xe redistribution in UO2
Autorzy:
Trujillo, L.
Powiązania:
https://bibliotekanauki.pl/articles/1934014.pdf
Data publikacji:
2011
Wydawca:
Politechnika Gdańska
Tematy:
UO2
grain boundaries
finite element method
phase field model
Opis:
The transport of fission gases in UO2 based nuclear fuels has a significant effect on the fuel performance. They can induce swelling of the fuel by the nucleation of gas bubbles within the fuel, and increase the mechanical interaction between the UO2 pellet and the cladding; also these bubbles can escape through the grain boundaries and contribute to the gaseous atmosphere in the fuel pin. We propose a model for the redistribution of xenon in the presence of different sinks, including nucleation and growth of gas bubbles. The finite element method has been implemented for the numerical solution of the model.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2011, 15, 2; 157-190
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ warunków zasilania na parametry eksploatacyjne silnika z magnesami trwałymi
Preliminary Investigation of an Induction Motor Supplied with Voltage Containing Subharmonics Using Field Methods
Autorzy:
Gnaciński, P.
Hallmann, D.
Powiązania:
https://bibliotekanauki.pl/articles/1367507.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
maszyny indukcyjne
subharmoniczne
interharmoniczne
jakość napięcia
model polowy
induction machines
subharmonics
interharmonics
power quality
field model
Opis:
This paper deals with the effect of voltage subharmononics on stator windings currents and rotational speed of an induction cage machine. The preliminary investigations were carried out with 2D machine model implemented in Ansoft Maxwell environment. The results of calculation are presented for a delta-connected machine of the rated power 3 kW.
Artykuł dotyczy wpływu subharmonicznych napięcia na prądy uzwojeń stojana i prędkość obrotową silnika indukcyjnego klatkowego. Badania wstępne wykonano za pomocą modelu 2D zaimplementowanego w środowisku Ansoft Maxwell. Wyniki obliczeń przedstawiono dla silnika indukcyjnego o mocy 3 kW, połączonego w trójkąt.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2015, 4, 108; 65-69
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Field-circuit analysis of AC machine taking into account stator winding asymmetry
Autorzy:
Pietrowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/1813709.pdf
Data publikacji:
2012
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
winding asymmetry
induction machine
axial flux
field-circuit model
Opis:
The paper presents the influence of an asymmetry of a stator winding on an axial flux in AC machine. The objective research was performed for selected values of asymmetry. The axial flux was calculated as the sum of flux linkage with stator winding. In order to achieve a magnetic field distribution a dedicated 2D finite element model of AC machine was elaborated. The waveforms of axial flux and torque-time characteristic have been shown. It can be concluded that the asymmetry has significant impact on the axial flux and the pulsation of torque.
Źródło:
Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały; 2012, 66, 32; 386-392
1733-0718
Pojawia się w:
Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Current State of Art of Satellite Altimetry
Autorzy:
Łyszkowicz, A.
Bernatowicz, A.
Powiązania:
https://bibliotekanauki.pl/articles/320651.pdf
Data publikacji:
2017
Wydawca:
Polskie Forum Nawigacyjne
Tematy:
satellite altimetry
radar altimeter
waveform retracker
ocean gravity field model
sea level
gravity anomalies
ocean tides
Opis:
One of the fundamental problems of modern geodesy is precise definition of the gravitational field and its changes in time. This is essential in positioning and navigation, geophysics, geodynamics, oceanography and other sciences related to the climate and Earth’s environment. One of the major sources of gravity data is satellite altimetry that provides gravity data with almost 75% surface of the Earth. Satellite altimetry also provides data to study local, regional and global geophysical processes, the geoid model in the areas of oceans and seas. This technique can be successfully used to study the ocean mean dynamic topography. The results of the investigations and possible products of altimetry will provide a good material for the GGOS (Global Geodetic Observing System) and institutions of IAS (International Altimetry Service). This paper presents the achievements in satellite altimetry in all the above disciplines obtained in the last years.
Jednym z podstawowych problemów współczesnej geodezji jest dokładne określenie pola grawitacyjnego i jego zmian w czasie. Ma to zasadnicze znaczenie dla zastosowań w pozycjonowaniu i nawigacji, w geofizyce, geodynamice, oceanografii i innych naukach związanych z klimatem i środowiskiem Ziemi. Jednym z głównych źródeł danych grawimetrycznych jest altimetria satelitarna, która dostarcza dane grawimetryczne z prawie 75% powierzchni globu ziemskiego. Altimetria satelitarna dostarcza również dane do badania lokalnych, regionalnych i globalnych procesów geofizycznych, modelu geoidy na obszarach mórz i oceanów oraz średniej dynamicznej topografii oceanów. Wyniki badań i potencjalne produkty danych altimetrycznych mają stanowić materiał dla Globalnego Geodezyjnego Systemu Obserwacji GGOS (Global Geodetic Observing System) i instytucji IAS (International Altimetry Service).
Źródło:
Annual of Navigation; 2017, 24; 31-47
1640-8632
Pojawia się w:
Annual of Navigation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of Triz SU-Field Models in the Process of Improving the Injector of an Internal Combustion Engine
Autorzy:
Chybowski, L.
Powiązania:
https://bibliotekanauki.pl/articles/2064896.pdf
Data publikacji:
2018
Wydawca:
STE GROUP
Tematy:
Theory of Inventing Problem Solving
TRIZ
Su-Field model
SFM
inventive standards
IS
fuel injector
diesel engine
Opis:
The article describes a method for analyzing and solving problem situations with the use of Su-Field models and 76 inventive standards. These tools are part of the “Theory of Inventive Problem Solving”. The author has presented the basic concepts of Su-Field models, including in the compilation of the most commonly used substances their fields and types of interactions in Su-Field models. The inventive standards have also been presented and grouped. Attempts have been made to solve two undesirable situations that occur during the operation of a complex technical system, which is the fuel injector of the self-ignition engine. Problem situations related to insufficient impact were modelled - too low tightening of the injector spring, and negative (harmful) interaction - erosive wear of the holes in the atomizer nozzle. Using the inventive standards of Class-1 and Class-2, general solutions to these problems have been found. After the transformation, exemplary detailed ways of solving the aforementioned problems have been presented in order to improve the design of the injector for these models. A summary and comments on the applicability of the presented methodology, regarding such complex technical systems, have also been presented.
Źródło:
Multidisciplinary Aspects of Production Engineering; 2018, 1, 1; 257--268
2545-2827
Pojawia się w:
Multidisciplinary Aspects of Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Simulation of Solidification Microstructure based on Adaptive Octree Grids
Autorzy:
Yin, Y.
Li, Y.
Wu, K.
Zhou, J.
Powiązania:
https://bibliotekanauki.pl/articles/947350.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
isothermal solidification
binary alloy
numerical simulation
phase field model
microsegregation
microstructure
krzepnięcie izotermiczne
stop dwuskładnikowy
symulacja numeryczna
Opis:
The main work of this paper focuses on the simulation of binary alloy solidification using the phase field model and adaptive octree grids. Ni-Cu binary alloy is used as an example in this paper to do research on the numerical simulation of isothermal solidification of binary alloy. Firstly, the WBM model, numerical issues and adaptive octree grids have been explained. Secondary, the numerical simulation results of three dimensional morphology of the equiaxed grain and concentration variations are given, taking the efficiency advantage of the adaptive octree grids. The microsegregation of binary alloy has been analysed emphatically. Then, numerical simulation results of the influence of thermo-physical parameters on the growth of the equiaxed grain are also given. At last, a simulation experiment of large scale and long-time has been carried out. It is found that increases of initial temperature and initial concentration will make grain grow along certain directions and adaptive octree grids can effectively be used in simulations of microstructure.
Źródło:
Archives of Foundry Engineering; 2016, 16, 2; 33-40
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Model polowy zjawisk elektromechanicznych napędu liniowego z magnesami trwałymi
Field model of electromechanical phenomena in the linear drive with permanent magnets
Autorzy:
Just, K.
Tarnowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/210854.pdf
Data publikacji:
2017
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
mechatronika
modelowanie i symulacja
napęd elektromagnetyczny
metoda elementów skończonych
analiza pola
model polowy
mechatronics
modelling and simulation
electromagnetic drive
finite element method
field analysis
field model
Opis:
W artykule przedstawiono problematykę modelowania i analizy liniowego napędu elektromagnetycznego z magnesami trwałymi z uwzględnieniem podstawowych zjawisk fizycznych. W modelu do analizy pola magnetycznego wykorzystano środowisko Comsol Multiphysics oparte na metodzie elementów skończonych (MES), którego zastosowanie umożliwia przeprowadzenie stosunkowo szybkiego modelowania struktury obiektu oraz wykonanie obszernej analizy zjawisk elektromagnetycznych w celu wyznaczenia parametrów całkowych pola. Na podstawie analizy dwuwymiarowego pola magnetycznego wyznaczono charakterystyki statyczne napędu, takie jak: siła elektromagnetyczna, indukcyjność uzwojeń oraz strumień magnetyczny.
The article presents problems of modelling and analysis of a linear permanent magnet electromagnetic drive taking into account basic physical phenomena. The Comsol Multiphysics environment based on the finite element method (FEM) is used in the magnetic field analysis, which allows for a relatively fast modelling of the object’s structure and performs extensive analysis of electromagnetic phenomena to determine the field integration parameters. Based on the analysis of the two-dimensional magnetic field, the static characteristics of the drive were determined, such as electromagnetic force, winding inductance, and magnetic flux.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2017, 66, 3; 125-131
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polowo-obwodowy model osiowosymetrycznego aktuatora liniowego
The field-circuit model of axis-symmetrical linear actuator
Autorzy:
Mikołajewicz, J.
Wojciechowski, R. M.
Powiązania:
https://bibliotekanauki.pl/articles/1367685.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
Model polowo-obwodowy
aktuator liniowy
analiza numeryczna
Field-circuit model
linear actuator
numerical analysis
Opis:
In the paper a field-circuit model of axis-symmetrical linear actuator has been presented. An actuator with conical armature has been considered and investigated. The integral parameters of the model, such as the inductance and the force have been determined on the basis of 2D electromagnetic field distributions, which have been obtained for the field model. Then, the calculated parameters have been implemented to the circuit model, ie. the model of the system comprising the coupled equations of the electrical circuit and the mechanical equilibrium equation of the considered actuator. In the considerations, the eddy current effect has not been taken account. The selected results of simulations have been presented.
W artykule przedstawiono polowy-obwodowy model osiowosymetrycznego aktuatora liniowego. Rozpatrywano aktuator nurnikowy z nurem stożkowym. Parametry całkowe modelu, takie jak indukcyjność oraz siła, zostały wyznaczone na podstawie rozkładu dwuwymiarowego pola magnetycznego. Obliczone parametry skupione następnie zaimplementowano w modelu obwodowym przetwornika, tzn. modelu obejmującym układ sprzężonych równań obwodu elektrycznego oraz równania dynamiki. W rozważaniach pominięto tłumiący charakter prądów wirowych. Przedstawiono wybrane wyniki badań symulacyjnych.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2015, 3, 107; 173-177
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A field-circuit model of the hybrid magnetic bearing
Autorzy:
Wajnert, Dawid
Powiązania:
https://bibliotekanauki.pl/articles/140245.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
dynamic simulation
field-circuit model
hybrid magnetic bearing
symulacja dynamiczna
model polowo-obwodowy
hybrydowe łożysko magnetyczne
Opis:
The paper presents a simulation model of the hybrid magnetic bearing dedicated to simulations of transient state. The proposed field-circuit model is composed of two components. The first part constitutes a set of ordinary differential equations that describes electrical circuits and mechanics. The second part of the simulation model consists of parameters such as magnetic forces, dynamic inductances and velocity-induced voltages obtained from the 3D finite element analysis. The MATLAB/Simulnik software was used to implement the simulation model with the required control system. The proposed field-circuit model was validated by comparison of time responses with the prototype of the hybrid magnetic bearing.
Źródło:
Archive of Mechanical Engineering; 2019, LXVI, 2; 191-208
0004-0738
Pojawia się w:
Archive of Mechanical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Current state of art of satellite altimetry
Autorzy:
Łyszkowicz, A. B.
Bernatowicz, A.
Powiązania:
https://bibliotekanauki.pl/articles/145515.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wysokościomierz radarowy
anomalia grawitacyjna
pływy oceaniczne
satellite altimetry
radar altimeter
waveform retracker
ocean gravity field model
sea level
gravity anomalies
ocean tides
Opis:
One of the fundamental problems of modern geodesy is precise defi nition of the gravitational fi eld and its changes in time. This is essential in positioning and navigation, geophysics, geodynamics, oceanography and other sciences related to the climate and Earth’s environment. One of the major sources of gravity data is satellite altimetry that provides gravity data with almost 75% surface of the Earth. Satellite altimetry also provides data to study local, regional and global geophysical processes, the geoid model in the areas of oceans and seas. This technique can be successfully used to study the ocean mean dynamic topography. The results of the investigations and possible products of altimetry will provide a good material for the GGOS (Global Geodetic Observing System) and institutions of IAS (International Altimetry Service). This paper presents the achievements in satellite altimetry in all the above disciplines obtained in the last years. First very shorly basic concept of satellite altimetry is given. In order to obtain the highest accuracy on range measurements over the ocean improved of altimetry waveforms performed on the ground is described. Next, signifi cant improvements of sea and ocean gravity anomalies models developed presently is shown. Study of sea level and its extremes examined, around European and Australian coasts using tide gauges data and satellite altimetry measurements were described. Then investigations of the phenomenon of the ocean tides, calibration of altimeters, studies of rivers and ice-sheets in the last years are given.
Źródło:
Geodesy and Cartography; 2017, 66, 2; 259-270
2080-6736
2300-2581
Pojawia się w:
Geodesy and Cartography
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza rozruchu jednofazowego silnika indukcyjnego z pomocniczym uzwojeniem kondensatorowym przy zmianie geometrii żłobka
An Effect of Rotor Slot Geometry on Starting Properties of Single-Phase Capacitor Induction Motor
Autorzy:
Wilk, M. J.
Makowski, K
Powiązania:
https://bibliotekanauki.pl/articles/1368734.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
maszyny elektryczne
jednofazowy
silnik indukcyjny
kondensatorowy
model polowy
optymalizacja
moment rozruchowy
prąd rozruchowy
electrical machines
single-phase
capacitor induction motor
field model
optimization
starting
torque
starting current
Opis:
Single-phase induction motor are widely used in industry and home appliance devices. However, they are characterized by relatively low efficiency and starting torque. Using a finite element model combined with optimization methods can be useful in designing new prototypes (virtual) or to improve exiting motor. The paper outlines the process of optimization of a single-phase capacitor induction motor. Numerical optimization performance depends on the formulation of the optimiaztion problem. Selection of the objective function, the variables and the area of solution can be assessed by performing sensitivity analysis of adopted optimization criteria of tested motor. For this purpose, the effect of geometric variables describing shape of rotor slot and capacitor capacitance on chosen criteria, like rotational torque and current was examined in locked rotor test in Flux2d/GOT-it software.
Jednofazowe silniki indukcyjne są powszechnie stosowane w przemyśle oraz AGD. Charakteryzują się one jednak stosunkowo niską sprawnością oraz momentem rozruchowym. Metody optymalizacyjne oraz dwuwymiarowy model polowo-obwodowy można z powodzeniem zastosować w projektowaniu prototypów (wirtualnych) nowych silników lub poprawy istniejących. W artykule przedstawiono zarys procesu optymalizacji jednofazowego silnika indukcyjnego z pomocniczym uzwojeniem kondensatorowym. Wydajność obliczeń numerycznych optymalizacyjnych zależy od sposobu sformułowania problemu optymalizacji. Wyboru funkcji celu, zmiennych niezależnych oraz obszaru dopuszczalnego zmian parametrów można dokonać przeprowadzając analizę wrażliwości przyjętych kryteriów optymalizacji testowanego silnika. W tym celu zbadano wpływ zmiennych geometrycznych opisujących kształt żłobka wirnika oraz pojemności kondensatora pracy w środowisku obliczeniowym GOT-it/Flux2D na przyjęte kryteria, czyli moment obrotowy i prąd w stanie zahamowanego wirnika.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2013, 4, 100/2; 89-93
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przegląd hybrydowych modeli pożaru
Review of Hybrid Fire Models
Autorzy:
Gałaj, J.
Oleksy, M.
Powiązania:
https://bibliotekanauki.pl/articles/373746.pdf
Data publikacji:
2013
Wydawca:
Centrum Naukowo-Badawcze Ochrony Przeciwpożarowej im. Józefa Tuliszkowskiego
Tematy:
modelowanie pożaru
polowy model pożaru
strefowy model pożaru
hybrydowe modele pożaru
technika CFD
fire modeling
field fire model
zone fire model
hybrid fire model
CFD technique
Opis:
Cel: Celem niniejszego artykułu jest omówienie oraz ocena hybrydowych modeli pożaru, które zostały opracowane na świecie w ostatnich kilkudziesięciu latach. Wprowadzenie: Modelowanie pożarów przy użyciu komputera miało swój początek w latach 80-tych. Od tej pory aż do dzisiaj powstało kilkaset różnych modeli, poczynając od najprostszych integralnych poprzez strefowe do najbardziej złożonych polowych wykorzystujących technikę CFD (Computational Fluid Dynamics). Ze względu na bardzo długi czas obliczeń, jaki jest wymagany w przypadku modeli polowych (przy prostszych obiektach jest to średnio kilkadziesiąt godzin dla jednego scenariusza, przy bardziej złożonych nawet kilkaset), w końcu lat 90-tych zaczęto opracowywać koncepcję modeli, których dokładność byłaby znacznie większa niż modeli strefowych, natomiast czas obliczeń byłby istotnie krótszy. Takim przykładem mogą być hybrydowe modele pożaru. Metodologia: Artykuł zawiera podstawowe informacje na temat aktualnie dostępnych na świecie modeli hybrydowych. Omówiono w nim: model komórkowy Chowa wykorzystujący rozpowszechniony model strefowy CFAST, modele FASIT i FAS3D, które uwzględniają dodatkową warstwę mieszania, model wielowarstwowy Suzuki, w którym zastosowano podział pomieszczenia na n poziomych warstw o tej samej wysokości, model mieszany Hua wykorzystujący kombinację modeli strefowych i polowych. Biorąc pod uwagę ogólne wymagania, jakie powinny spełniać modele pożarów, w pracy zamieszczono ocenę poszczególnych modeli hybrydowych, a także próbę ich porównania ze sobą. Na końcu zamieszczono podsumowanie rozważań i kilka ogólnych wniosków z nich wynikających. Wnioski: Na podstawie przeprowadzonej oceny można stwierdzić, że obecnie istniejące modele hybrydowe nie są w stanie w pełni zastąpić modeli polowych opartych na technice CFD. Aby było to możliwe, należy jeszcze włożyć wiele pracy w ich rozwój, a w szczególności uwzględnić m.in. następujące zagadnienia: zmianę parametrów pożaru w każdej komórce, uniwersalny model gaszenia przy pomocy tryskaczy, dysz mgłowych lub prądownic, wpływ pożaru na konstrukcję budynku, możliwość wpływania użytkownika na dokładność otrzymanych wyników, a tym samym czas obliczeń, określenie bieżącego zapotrzebowania na tlen i wpływu jego stężenia na proces spalania oraz zastosowanie odpowiedniego modelu turbulencji.
Purpose: The main purpose of this article is to describe and evaluate of hybrid fire models which have been developed all over the world in the last several decades. Introduction: Computer modeling of fires was introduced in the early eighties. Several hundred fire models have been created till now from the simplest integral to the most complex field one, using CFD (Computational Fluid Dynamics) technique. Field models require very long time for single simulation (the simpler objects need often about several dozen hours for simple scenario and even hundred hours for more complex scenarios). That was the main reason for appearance of a new idea in modeling of fires. Several hybrid models have been carried out in the end of nineties and in the beginning of this century. Its accuracy was comparable with field models, but time needed for single fire scenario was significantly shorter. Methodology: This article contains basic information on hybrid models and includes their evaluation. One of the first models was a result of work made by Charters and McIntosh on Leeds University (England), which effected in FASIT program created for studying of fires in tunnels and FAS 3D being a three-dimensional version of the first one (fires in compartments). CFD modeling elements were used in this program and each gas layer was divided into the grid of control volumes. For the first time, the mixing zone was separated into upper and lower zone. Obtained model has both main features of the field and zone models, what enables to simulate the gas fire environment in compartments more precisely than with the typical zone model without the need of performing long and expensive calculations. In turn, Chow proposed a method of using the existing CFAST tool for larger compartments. He divided the analyzed volume into several smaller cells (he examined cases with 3, 9 and 15 cells), and then, for each one of them he used the same approach as for single compartment. In 2002, Suzuki et al. proposed a modified multilayer model. He divided single compartments into horizontal layers with equal heights and determined the same parameters for each one of them using the equations following from mass and energy conservation laws. Another approach to the hybrid model was proposed by Hua et al. They used a combination of field and zone models to simulate and analyze the fire smoke propagation in multistorey building. It was assumed that in compartments with more complex fire dynamics, that is, i.e. with a fire source, the calculation mechanism would be consistent with the field model, while in compartments where the hot and cold zones are determined more clearly (i.e. corridors, compartments located farther from the fire source), the zone model should be used. Conclusions: Article presents several characteristics which show time curves of under-ceiling layer thickness achieved for the proposed model and for the typical zone and field models. Last of the mentioned solutions seems to be very interesting, but even in compartments with simpler fire dynamics where the zone model was used, unpredictable processes can occur (i.e. unsteady flows, local whirls). They can result in considerable spatial differences of calculated parameters, such as: temperatures, pressures, gas concentrations, etc. Based on the evaluation and comparison of discussed hybrid models one can claim, that neither of them doesn’t meet all requirements. There is still a lot of work that should be done on these models to improve them by consideration of the following aspects: changes of fire parameters in every cell, turbulence model, application of universal model of extinguishing systems including sprinklers, mist heads and nozzles, affecting of fire on building construction, possibility for user to influence on the calculation accuracy, determining of actual oxygen consumption and influence of different factors on combustion and pyrolysis process.
Źródło:
Bezpieczeństwo i Technika Pożarnicza; 2013, 4; 79-92
1895-8443
Pojawia się w:
Bezpieczeństwo i Technika Pożarnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of field mathematical models for designing of windings of brushless permanent magnet motors
Zastosowanie matematycznych modeli pola w projektowaniu uzwojeń bezszczotkowych silników z magnesami trwałymi
Autorzy:
Volokitina, Y.
Vlasov, A.
Opalev, Y.
Powiązania:
https://bibliotekanauki.pl/articles/158589.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
Tematy:
brushless DC electric motor
motor with external rotor
mathematical field model
electromotive force
harmonic analysis
bezszczotkowy silnik elektryczny prądu stałego
silnik elektryczny z zewnętrznym wirnikiem
model matematyczny pola
siła elektromotoryczna
analiza harmoniczna
Opis:
The article presents a method for the electromotive force (EMF) determination and for correction of a connection diagram of a brushless DC (BLDC) motor winding. An appropriate mathematical field model has been proposed for this purpose. Calculation results are confirmed by experimental researches of the BLDC motor ДБ100-90-1-Р42 with an external rotor.
W artykule przedstawiono metodę wyznaczania siły elektromotorycznej bezszczotkowego silnika prądu stałego, dla sprawdzenia poprawności połączeń w jego schemacie uzwojenia. W tym celu zaproponowano odpowiedni model matematyczny pola. Wyniki obliczeń numerycznych potwierdzono badaniami eksperymentalnymi bezszczotkowego silnika z wirnikiem zewnętrznym typu ДБ100-90-1-Р42.
Źródło:
Prace Instytutu Elektrotechniki; 2014, 267; 59-66
0032-6216
Pojawia się w:
Prace Instytutu Elektrotechniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of the finite element method for parameter estimation of the circuit model of a high power synchronous generator
Autorzy:
Berhausen, S.
Paszek, S.
Powiązania:
https://bibliotekanauki.pl/articles/200790.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
synchronous generator model
finite element method
field-circuit model measurement verification
circuit model parameter estimation
model synchronicznego generatora
metoda elementów skończonych
weryfikacja modelu pomiaru pola obwodu
estymacja parametrów modelu obwodu
Opis:
The paper presents the two-dimensional, field-circuit model of a high power synchronous generator verified by measurements. The model enables determining the waveforms of electromagnetic quantities in steady and transient states. Verification of the model was based on comparison of the measured and calculated waveforms after a disturbance in the voltage regulation system of a TWW-200-2 generator operating in Połaniec Power Plant. There are also presented the field methods for determining electromagnetic parameters (synchronous reactances and time constants) when using the distributions of static and quasi-static, magnetic and electromagnetic fields calculated by the finite element method (FEM). The set of these parameters was used as the starting parameters of the optimization algorithm for estimation of electromagnetic parameters of the synchronous generator circuit model. The dynamic waveforms under the generator load conditions calculated by the finite element method are the basis of parameter estimation. The parameter estimation of the generator model was performed with the use of the least squares method.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2015, 63, 3; 575-582
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies