Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "dielectric" wg kryterium: Temat


Tytuł:
Study of dielectric properties of fenugreek seeds (Trigonella foenum graecum)
Autorzy:
Khan, Mohd. Shafi
Chandel, Vishal Singh
Manohar, Rajiv
Shukla, Jagdeesh Prasad
Powiązania:
https://bibliotekanauki.pl/articles/2199655.pdf
Data publikacji:
2012-08-20
Wydawca:
Instytut Hodowli i Aklimatyzacji Roślin
Tematy:
ac conductivity
dielectric constant
dielectric loss
fenugreek
moisture
Opis:
The present paper studied the dielectric constant, dielectric loss, and ac conductivity of fenugreek seed, a medicinal seed (Trigonella foenum graecum), within the frequency range of 10 kHz and 10 MHz and the temperature range of 300C and 500C. Impedance gain/phase analyser (HP 4194 A) was used to measure the dielectric constant and the dielectric loss and Julabo (temperature controller, F-25, Germany)  was used for keeping the temperature of fenugreek seeds constant.  It was found that the dielectric constant and the dielectric loss decrease with the increase in the frequency while the same increase with the increase in temperature and moisture content. The ac conductivity increased with the increase in frequency, moisture and temperature.
Źródło:
Plant Breeding and Seed Science; 2012, 66; 17-28
1429-3862
2083-599X
Pojawia się w:
Plant Breeding and Seed Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dielectric Relaxation of Manganese Modified Bi6Fe2Ti3O18 Aurivillius Type Ceramics
Autorzy:
Bartkowska, J. A.
Bochenek, D.
Powiązania:
https://bibliotekanauki.pl/articles/354618.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
activation energy
Aurivillius phase
dielectric constant
dielectric relaxation
Vogel-Fulcher law
Opis:
The five-layer Aurivillius type structures with the general chemical formula Bi5Fe2-xMnxTi3O18, where x = 0, 0.6, 1.2 have been synthesized and tested. The SEM studies showed a significant increase in grain size in the manganese-modified Aurivillius type ceramic material (for x=1.2). The increase in the amount of manganese ions (Mn3+) affects the decrease in the temperature at which the relaxation processes take place. Namely from 525 K (1 kHz) and 725 K (1 MHz) for BFT sample (x=0) to 355 K (1 kHz) and 565 K (1 MHz) for BFM12T sample (x=1.2). Using the Arrhenius’s law and the Vogel-Fulcher’s relationship the activation energy (Ea) and the relaxation time have been calculated. The value of Ea increases with the increase of the Mn amount from 0.737 eV (for x=0) to 0.915 eV (for x=1.2).
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 1; 221-225
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowe podejście w doborze, eksploatacji i przechowywaniu sprzętu bhp dla energetyki
New approach to selection, use and storage of the equipment for power industrial safety
Autorzy:
Dżugan, R.
Powiązania:
https://bibliotekanauki.pl/articles/952762.pdf
Data publikacji:
2012
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
sprzęt dielektryczny
dielectric equipment
Opis:
Omówiono podstawowe informacje techniczne o nowych konstrukcjach wskaźników napięcia, drążków izolacyjnych i uziemiaczy produkowanych w firmie Aktywizacja.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2012, 31; 207-209
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dielectric studies of nano structured BaTi1-xSnxO3 solid solutions
Autorzy:
Bitra, H. Ch. R.
Prasad, B. B. V. S. V.
Powiązania:
https://bibliotekanauki.pl/articles/412300.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
BTSx
XRD
SEM
dielectric constant
Opis:
BaTi1-xSnxO3 (BTSx) ceramics had been prepared by temperature sintering technique. Initially, the samples were calcined at a temperature at 900 °C for 2 hours, after that ball milling was done and then the samples were sintered at a temperature of 1150 °C for 3 hours. X-ray diffractometry, Scanning Electron Microscopy, Energy Dispersive Spectroscopy and Dielectric measurements were carried out and structural, micro structural and elemental analyses were discussed in brief.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2014, 13, 2; 191-201
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Creating the optical bistable switch in the dielectric slab doped with asymmetric semiconductor quantum wells
Autorzy:
Nasehi, R.
Powiązania:
https://bibliotekanauki.pl/articles/174447.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
optical bistability
optical multistability
dielectric slab
Opis:
We have investigated the optical switching in a dielectric slab with a novel configuration of solid-state medium. This new scheme combines the attractive features of all-optical switching in dielectric medium doped with asymmetric quantum well nanostructure with the ability to convert the optical bistability to multistability (or vice versa) by using the strength of Fano interference and the energy splitting effect. The dependence of optical bistability behavior on the intensity of the strong coupling field and the slab thickness is also given.
Źródło:
Optica Applicata; 2016, 46, 4; 541-551
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effective area of measurement electrode in volume resistivity and permittivity of solid dielectrics measurements
Autorzy:
Kołakowska, D.
Lisowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/114298.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
dielectric materials
permittivity
resistivity
measurement electrodes
Opis:
The problems of determination of the effective area of the measurement electrode during the evaluation of volume resistivity and electrical permittivity based on measurements in three electrode system are discussed. The presented analysis shows that because of the inaccuracies of formulas given in the standards concerning the effective area of the measurement electrode, the calculation of the volume resistivity and electrical permittivity might be encumbered with errors. The values of these errors are presented graphically. It has been shown that the factor of the measurement electrode extension at the electrical permittivity measurements also depends on electrical permittivity.
Źródło:
Measurement Automation Monitoring; 2015, 61, 2; 32-34
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Właściwości dielektryczne wybranych odmian miodu
Dielectric properties of selected honey varieties
Autorzy:
Łuczycka, D.
Powiązania:
https://bibliotekanauki.pl/articles/290900.pdf
Data publikacji:
2010
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
miód
właściwości dielektryczne
honey
dielectric value
Opis:
Celem pracy było sprawdzenie możliwości wykorzystania różnych wielkości dielektrycznych do różnicowania miodów naturalnych. Badano wybrane cechy dielektryczne 30 odmian miodów w częstotliwości pola elektromagnetycznego 2 kHz w temperaturze 25°C. Określenie dla patoki przenikalności elektrycznej, współczynnika strat dielektrycznych oraz konduktywności pozwala na różnicowanie miodu. Konduktywność roztworu jednoznacznie różnicuje badane grupy miodów jednak, jak wykazała analiza wyników badań, sposób jej wyznaczania może być źródłem znaczących błędów pomiarowych. Dalsze badania prowadzone na większej ilości i różnorodności miodów mogą doprowadzić do wprowadzenia nowych, skutecznych metod oceny rodzaju i jakości miodu naturalnego. Dalsze prace powinny się skupić nad wyznaczeniem ścisłych warunków pomiaru umożliwiających ocenę jakości miodu na podstawie pomiarów patoki a nie jej wodnego roztworu.
The aim of the work was to check the possibility of use of various dielectric values for differentiation of natural honeys. Selected dielectric characteristics for 30 honey varieties were examined in the frequency of the 2 kHz electromagnetic field at a temperature of 25°C. The determination of permittivity, dielectric loss factor and conductivity for liquid honey helps to differentiate honeys. The conductivity of the solution clearly differentiates groups of honeys under analysis; however, as shown by the analysis of test results, the method of its determination can be a source of significant measurement errors. Further tests carried out for a larger quantity and differentiation of honeys can result in an introduction of new effective methods of evaluation of the kind and quality of natural honey. Further works should focus on the determination of strict conditions of measurement in which the quality of honey can be evaluated on the basis of measurements of liquid honey rather than its water solution.
Źródło:
Inżynieria Rolnicza; 2010, R. 14, nr 5, 5; 137-142
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Terahertz dielectric characterisation of fibres in a time-domain spectrometer
Autorzy:
Pacewicz, Adam
Kopyt, Paweł
Cuper, Jerzy
Krysicki, Mateusz
Salski, Bartłomiej
Powiązania:
https://bibliotekanauki.pl/articles/2204194.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Elektryków Polskich
Tematy:
terahertz spectroscopy
fibre characterisation
dielectric materials
Opis:
An innovative measurement setup for the dielectric characterisation of fibres in a terahertz time-domain spectrometer using an HDPE elliptical lens for coupling into the fibres has been built and validated by measurements of several different types of samples. The setup is based on a commercial all fibre-coupled terahertz time-domain spectrometer. Measurements of the effective refractive index have been conducted on polypropylene-based three-dimensional printing filaments, silica glass rods, and a polytetrafluoroethylene cord of lowered density, covering the frequency range of approximately 100 GHz to 1 THz. The theoretical part of the work includes numerical calculations performed via the finite difference eigenmode method and the characteristic equations of a uniform circular dielectric waveguide for a few guided modes, from which it is clear that primarily the fundamental mode propagates along the fibre. Details on model-based phase corrections, crucial to the accurate determination of the effective refractive index of dispersive fibres, have been presented as well.
Źródło:
Opto-Electronics Review; 2023, 31, 2; art. no. e144596
1230-3402
Pojawia się w:
Opto-Electronics Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Streaming electrification of insulating liquid mixtures
Autorzy:
Zdanowski, Maciej
Maleska, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/141677.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
dielectric liquids
streaming electrification
transformer insulation
Opis:
Extensive efforts have been made for many years by the power generating industry to replace conventional solid and liquid insulation with synthetic materials. Those measures are aimed at increasing the load capacity, improved fire safety and extending transformer life during exploitation. Modern insulating materials include aramid fibre-based paper and insulating fluids made of synthetic and natural esters. The paper presents research results of the electrostatic charging tendency (ECT) of mixtures of fresh and aged mineral oil Trafo En with synthetic ester Midel 7131 and natural ester Midel 1204. The measurements were taken in a flow-through system using the pipes made of metal, cellulose and aramid paper. The influence of the liquid flow velocity, the type of material of the measuring pipe and the mixture content on the level of the streaming electrification current generation was determined.
Źródło:
Archives of Electrical Engineering; 2019, 68, 2; 387-397
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Techniki spektroskopii dielektrycznej w badaniu jakości materiałów i produktów rolniczych
Autorzy:
Skierucha, W.
Wilczek, A.
Powiązania:
https://bibliotekanauki.pl/articles/274129.pdf
Data publikacji:
2012
Wydawca:
Roble
Tematy:
spektroskopia dielektryczna
pomiar własności dielektrycznych
badanie jakości
produkt rolniczy
dielectric spectroscopy
dielectric properties measurement
agricultural product
Opis:
Spektroskopia dielektryczna opisuje właściwości dielektryczne próbki materiału w funkcji częstotliwości. Takimi materiałami mogą być obiekty agrofizyczne, np. gleba, owoce, warzywa, półprodukty i produkty przemysłu spożywczego, ziarno itp. Techniki spektroskopii dielektrycznej umożliwiają pomiar nieniszczący oraz nieinwazyjny obiektów agrofizycznych dając szybką ocenę ich wilgotności oraz jakości.
Źródło:
LAB Laboratoria, Aparatura, Badania; 2012, 17, 1; 6-14
1427-5619
Pojawia się w:
LAB Laboratoria, Aparatura, Badania
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Sn and Pb Ions Substitutions on Dielectric Properties of Barium Titanate
Autorzy:
Bąk, W.
Kajtoch, C.
Ptaszek, S.
Lisińska-Czekaj, A.
Czekaj, D.
Ziętek, D.
Glos, T.
Garbarz-Glos, B.
Powiązania:
https://bibliotekanauki.pl/articles/352509.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
barium titanate ceramics
dielectric properties
phase transition
Opis:
The results of the microstructural and dielectric measurements of (Ba1-xPbx)(Ti1-xSnx)O3 (BPTSx) (x = 0, 0.05, 0.10, 0.30) polycrystalline samples are presented. The samples were obtained by means of a high temperature synthesis and their expected stoichiometry was confirmed by energy dispersive spectroscopy (EDS) measurements. The dielectric properties of BPTSx were studied with the use of broadband dielectric spectroscopy. The measurements over a wide range of temperature (from 140 K to 600 K) and frequency (from 0.1 Hz to 10 MHz) were performed. The experimental results indicate an influence of Pb ions in a sublattice A and Sn ions in a sublattice B substitution on paraelectric - ferroelectric phase transition parameters. Diffused phase transitions from a paraelectric to ferroelectric state (for x = 0.10 and x = 0.30) were observed. From the electric modulus measurements in the frequency domain the relaxation times and the activation energy were determined.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 2A; 905-908
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ zawilgocenia na relaksację dielektryczną impregnowanego olejem mineralnym Nomexu na podstawie pomiarów PDC
Influence of moisture content on dielectric relaxation of oil impregnated Nomex basing on PDC measurements
Autorzy:
Subocz, J.
Zenker, M. Ł.
Powiązania:
https://bibliotekanauki.pl/articles/156184.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
Nomex
relaksacja dielektryczna
PDC
FDS
dielectric relaxation
Opis:
W artykule zaprezentowano pomiary PDC (Polarization Depolarization Current). impregnowanego olejem transformatorowym Nomexu o różnym zawilgoceniu. Analizę jakościową procesów relaksacyjnych przeprowadzono za pomocą aproksymacji pradów polaryzacji funkcją Jonschera LFD. Badania wykazały, że szacowanie zawilgocenia Nomexu za pomocą metody PDC może być utrudnione dla zawartości wody 1 3,5%. Następnie wyniki badań zweryfikowano z wynikami pomiaru metodą FDS (Frequency Domain Spectroscopy).
Nomex has been introduced to electrotechnical industry mainly as a high voltage insulating material, used for example in power transformers. The aim of this paper is to identify the influence of moisture on dielectric relaxation of solid-liquid insulation consisting of Nomex impregnated with transformer oil. To perform such research, there was constructed a special measurement set-up with steel electrodes 20x20 cm large. A sheet of Nomex 410, 0.76 mm thick, was placed between these electrodes. The required values of moisture level were achieved by drying Nomex at 150°C in a laboratory vacuum chamber or through moisturization in a Feutron climate chamber at the relative air humidity 90% and the temperature 24°C. The moisture level was estimated on the basis of measurements of weight changes. Relaxation processes were measured with the PDC method (Polarization Depolarization Current). The research showed that assessment of the moisture content with the PDC method can be difficult for the values from the range 1-3%. The experimental results were verified with FDS (Frequency Domain Spectroscopy) measurements. The analysis of the relaxation process of oil impregnated Nomex showed that: a) water content in Nomex results in significant increase in dielectric losses, which seems to be caused by water particles, b) in the moisture range 1-3% dielectric response of Nomex is practically the same and does not depend on the moisture level. The same effect was observed for both relaxation process and conductivity, c) for the water content above 3-3,5% there is a rapid increase in the conductivity and dielectric losses. It is probably due to the exceeding percolation threshold of water particles gathered between aramid fibres.
Źródło:
Pomiary Automatyka Kontrola; 2013, R. 59, nr 2, 2; 133-136
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Characterization of Manganese Sulphide Thin Films by Chemical Bath Deposition Method
Autorzy:
Geetha, G.
Murugasen, P.
Sagadevan, S.
Powiązania:
https://bibliotekanauki.pl/articles/1030049.pdf
Data publikacji:
2017-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
MnS thin films
XRD
SEM
dielectric studies
Opis:
Manganese sulphide (MnS) thin films were prepared by chemical bath deposition method. X-ray diffraction analysis was used to study the structure and the crystallite size of MnS thin films. The grain size and the surface morphology were studied using scanning electron microscopy. The optical properties were studied using the UV-visible absorption spectrum. The dielectric properties of MnS thin films were studied for different frequencies and different temperatures. Further, electronic properties, such as valence electron plasma energy, average energy gap or the Penn gap, the Fermi energy and electronic polarizability of the MnS thin films were calculated. The ac electrical conductivity study revealed that the conduction depended both on the frequency and the temperature. The temperature dependent conductivity study confirmed the semiconducting nature of the films.
Źródło:
Acta Physica Polonica A; 2017, 132, 4; 1221-1226
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Microstructure and Magnetoelectric Properties of Multiferroic Composites
Autorzy:
Bartkowska, J. A.
Bochenek, D.
Niemiec, P.
Powiązania:
https://bibliotekanauki.pl/articles/355756.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
composites
dielectric constant
magnetoelectric coupling coefficient
multiferroics
Opis:
Multiferroic composites are very promising materials because of their applicability because the magnetoelectric effect occurs in them. The subject of the study were two multiferroic ceramic composites: leaded obtained from powder of the composition PbFe0.5 Nb0.5 O3 and ferrite powder of the composition Ni0.64 Zn0.36 Fe2 O4 and unleaded which was obtained from the powder of the composition BaFe0.5 Nb0.52 O3 and the same ferrite powder Ni0.64 Zn0.36 Fe2 O4. For the both multiferroic materials the following studies were conducted: SEM, BSE, EDS, XRD and the temperature dependence of dielectric constant ε(T). Using the previously developed method of calculating the magnetoelectric coupling factor (g), based on dielectric measurements, the magnitude of the magnetoelectric effect in the multiferroic composites was determined.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 853-858
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling of diffraction radiation processes on periodic metal-dielectric structures in millimeter wavelength range
Autorzy:
Rybalko, O.
Zhurba, V.
Petrovskyi, M.
Rybalko, I.
Buriak, I.
Vorobyov, G.
Powiązania:
https://bibliotekanauki.pl/articles/173723.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
diffraction radiation
metal-dielectric structure
microwave
waveguide
Opis:
A general approach to experimental modeling of Cherenkov and diffraction radiation in vacuum electron devices employing periodic metal-dielectric structures is presented. The potential benefits and drawbacks of this approach to the design of microwave devices are discussed. The approach is based on resemblance of electromagnetic properties between the modulated electron beam and the surface wave in a dielectric waveguide. A dedicated millimeter-wave experimental setup is developed and constructed.
Źródło:
Optica Applicata; 2018, 48, 1; 105-116
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies