Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "composite material" wg kryterium: Temat


Tytuł:
The potential application of sheep wool as a component of composites
Autorzy:
Szatkowski, P.
Tadla, A.
Flis, Z.
Szatkowska, M.
Suchorowiec, K.
Molik, E.
Powiązania:
https://bibliotekanauki.pl/articles/2119504.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Zootechniczne
Tematy:
sheep wool
material engineering
composite material
polymer
Opis:
Composite materials, which can have a wide range of properties, can have an important role in protecting the natural environment. Until now, the most popular fibres used in composites have been those obtained by chemical processes. Natural fibres are much less commonly used, but interest in them is growing due to the principles of eco-development, care for the environment, and their important fact that they are biodegradable. Sheep wool, due to its unique physicochemical properties, such as thermal and sound insulation and the ability to absorb and release moisture, can be used as a fibre in biodegradable composites. Biodegradable polymers are becoming increasingly popular as an alternative to plastics, which have a negative impact on the environment. Although the use of biodegradable polymers is limited by their poor mechanical and thermal properties, a filler in the form of sheep wool fibres increases the mechanical properties of the composite and reduces production costs, while maintaining its biodegradability. Mixed wool is treated as a waste product which is difficult to utilize in the textile industry, but innovative applications in agriculture and medicine provide the opportunity to make use of it. As a fibre with unique physicochemical properties, wool can be used as an element of biocomposites in line with the strategies of bioeconomy and sustainable development.
Źródło:
Roczniki Naukowe Polskiego Towarzystwa Zootechnicznego; 2021, 17, 4; 1-8
1733-7305
Pojawia się w:
Roczniki Naukowe Polskiego Towarzystwa Zootechnicznego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Radiation Shielding Properties of Some Composite Panel
Autorzy:
Al-Sarray, E.
Akkurt, İ.
Günoğlu, K.
Evcin, A.
Bezir, N.
Powiązania:
https://bibliotekanauki.pl/articles/1031289.pdf
Data publikacji:
2017-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
radiation protection
composite material
radiation measurement
Opis:
With the discovering atomic nucleus, nuclear science started to be used in different fields and researcher focused on radiation protection as it is dangerous for human cell. Thus radiation physics and materials development becomes one of the important subject in science for this purposes. The developed material should be used for radiation shielding. In this work gamma ray shielding properties of some composite materials produced by polymer have been investigated.
Źródło:
Acta Physica Polonica A; 2017, 132, 3; 490-492
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the light source and curing parameters on microhardness of a silorane-based dental composite material
Autorzy:
Malara, P.
Czech, Z.
Świderski, W.
Powiązania:
https://bibliotekanauki.pl/articles/356555.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
dental composite material
light-curing
silorane
microhardness
Opis:
The aim of the study was to determine the influence of the light source and the light-curing parameters (the distance of the material from the light source and time of light-curing) on microhardness of Flitek Silorane dental composite material. Standardized samples of Filtek Silorane material were cured using two types of Light Curing Units (LCUs) - halogen and LED. The distance of the light source and time of curing differed between samples. The Knoops microhardness was tested using microhardness tester Micromet 5103. Using LED light curing unit allowed to achieve significantly higher microhardness of silorane-based dental material Filtek Silorane than using halogen light curing unit. Decreasing the distance from the light source to the surface of silorane-based material Filtek Silorane improved its microhardness. A prolonged curing time could compensate the drop in microhardness of Filtek Silorane material resulting from an increased distance from the light source to the surface of the material only in a limited range of intervals.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 3; 1331-1336
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Detection of very thin defects in CFRP by the lock-in thermography method
Autorzy:
Świderski, W.
Powiązania:
https://bibliotekanauki.pl/articles/247348.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
non-destructive testing
composite material
IR thermography
Opis:
Quick development of constructional composite materials application is caused by their excellent mechanical and strength-related properties, combined with a low specific weight. One of the basic groups of reinforcement materials in composites are carbon fibres discovered back in 19th century. The main reason of defects in structures of composite materials is the variability of working charges in constructions during the process of using. Existed defects are complicated because of the effects like loss of continuity of reinfused fibres, binder cracks and loss of fibres adhesiveness to binder. Diagnostic methods, which are effective with relation to metals became little effective when used in detection of defects in composite materials. This caused greater interest of diagnostic techniques with using infrared thermography. Lock-in thermography is one of NDT methods providing phase images of thermal waves in a sample leading to receiving a distribution of internal defects and allowing for thermal properties evaluation. We used lock-in thermography in connection with modulated thermal source synchronized with the IR image acquisition camera. It was prepared sample of multilayer structure carbon composite with deliberately introduced defects for comparative purposes. Very thin defects of different sizes and shapes made of Teflon or copper having a thickness of 0.1 mm were searches. The results are reported in the paper.
Źródło:
Journal of KONES; 2016, 23, 1; 385-390
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimal design of fiber-reinforced composite disks
Optymalne projektowanie tarcz kompozytowych wzmocnionych włóknami
Autorzy:
Dems, K.
Wiśniewski, J.
Powiązania:
https://bibliotekanauki.pl/articles/279406.pdf
Data publikacji:
2009
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
composite material
fibers layout
optimal design
evolutionary algorithm
Opis:
The paper is devoted to the modeling, analysis and optimization encountered in the design process of two-dimensional structural components made of fiber-reinforced composite materials subjected to service loading. The problem of optimal layout of reinforcing fibers in the composite in order to obtain the assumed mechanical properties of the disk is considered. The case of creation of linear and curvilinear fibers is discussed. The adequate model, relevant optimality conditions for this type of design problem are derived and the optimization procedure based on the evolutionary algorithm is proposed. The problem considered in the paper is illustrated by some numerical examples.
Praca dotyczy zagadnień modelowania, analizy i optymalizacji zachodzących w procesie projektowania płaskich, dwuwymiarowych elementów konstrukcyjnych wykonanych z materiałów kompozytowych i obciążonych statycznie siłami działającymi w ich płaszczyźnie. Rozpatrzono problem projektowania optymalnego ułożenia włókien wzmacniających w kompozycie pod kątem uzyskania przez element konstrukcyjny wykonany z tego materiału wymaganych własności mechanicznych. Rozważania dotyczyły sposobu projektowania oraz generowania rodziny prostoliniowych, jak również krzywoliniowych włókien wzmacniających. Do poszukiwania optymalnych rozwiązań zastosowano opracowaną do tego celu metodę optymalizacyjną opartą na algorytmie ewolucyjnym. Rozpatrywany w pracy problem zilustrowano przykładami numerycznymi.
Źródło:
Journal of Theoretical and Applied Mechanics; 2009, 47, 3; 515-535
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Damage and fracture analysis of bolted joints of composite materials based on peridynamic theory
Autorzy:
Yang, Na-Na
Zhao, Tian-You
Gu, Ji-Guang
Chen, Zhi-Peng
Powiązania:
https://bibliotekanauki.pl/articles/258888.pdf
Data publikacji:
2019
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
peridynamic theory
composite material
damage and fracture
joints
Opis:
It is clear that the advantages of fibre glass-reinforced plastics surpass those of steel, but the failure analysis of composite structures is much more complex than that of isotropic materials as composite materials may fail in a variety of ways. In order to simulate the damage and fracture of bolted joints of fibre reinforced composite, the bond-based peridynamic method suitable for elastic, brittle and anisotropic characteristics of composite material is used. The peridynamic model for composite laminate is validated by the finite element method. Then a peridynamic program of composite damage is applied to calculating the damage of bolted joint structure and the damage propagation process and failure mode of the structure is obtained.
Źródło:
Polish Maritime Research; 2019, 2; 22-32
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Analysis of the Features of Cast Composite Materials Based on Light Alloys Reinforced by Particles
Autorzy:
Dan, Olena
Powiązania:
https://bibliotekanauki.pl/articles/2056036.pdf
Data publikacji:
2022
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
aluminium
magnesium
alloy
composite material
matrix
reinforcing particles
Opis:
Light alloys are widely used in industry and everyday life due to their high physical and mechanical properties, wear and corrosion resistance, as well as low cost. In this regard, the use of light alloys as a basis for composite materials is both justified and expedient. The potential of these materials has not been fully used to this day, despite the growing interest in metal matrix composites and extensive investigations aimed at the development of production technology and the introduction of advanced systems based on light matrices. The article presents a short review of the analysis of the main components of the technology of cast composite materials based on light alloys of aluminum and magnesium reinforced by particles. Particular attention is paid to the choice of the matrix alloy, the type, size and amount of reinforcing particles introduced into it, as well as the thermal-time and kinetic parameters of the process.
Źródło:
Journal of Casting & Materials Engineering; 2022, 6, 1; 8--13
2543-9901
Pojawia się w:
Journal of Casting & Materials Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical strength study of ultra-light composite seat frame destined to passengers transport
Autorzy:
Czechowski, Leszek
Kotełko, Maria
Jankowski, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/2056099.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
numerical simulations
composite material
failure criteria
strength analysis
Opis:
The paper concerns numerical study of the ultra-light seat frame serving transported patients in ambulance. The structure of seat was designed to be built of the carbon fibers, aluminium and steel. The present prototype distinguishes itself with low mass and high strength. During modelling, the stress state and displacement state were verified based on requirements according to regulation ECE14. In simulation, solid, beam and connection elements were employed to consider all the parts of structures. The analysis of the stress state verification based on the assumptions of boundary conditions close to regulation ECE14. The isotropic materials were considered to be in elastic range. In case of composite materials, TSAI-WU (TSW) criterion for assessment of strength was taken into account. Five different variants of seat were taken into consideration to indicate the differences between them. The paper includes the results of analysis of composite structure under static loads which were shown and discussed.
Źródło:
Archiwum Motoryzacji; 2021, 94, 4; 5--15
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effective heat conductivities in certain biperiodically stratified composites
Efektywne współczynniki przewodzenia ciepła dla pewnych biperiodycznych kompozytów warstwowych
Autorzy:
Szlachetka, O.
Wagrowska, M.
Wozniak, C.
Powiązania:
https://bibliotekanauki.pl/articles/40955.pdf
Data publikacji:
2013
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
heat conductivity
heat conductivity coefficient
layered composite material
Źródło:
Acta Scientiarum Polonorum. Architectura; 2013, 12, 4
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vibration damping characteristics of the cork-based composite material in line to frequency analysis
Autorzy:
Karpenko, Mykola
Nugaras, Justas
Powiązania:
https://bibliotekanauki.pl/articles/2200833.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
composite material
cork
frequency
laminate structure
vibration testing
Opis:
The conducted research suggests possibility of replacing extruded polystyrene with a renewable cork-based material in laminated composite structures. Different fractions of the cork-based material of a composite laminate have been applied. The composites have been tested employing a hammer-focused vibration method. Conforming to obtained results, the cork-based material of smaller fraction has damping properties similar to those of the extruded polystyrene composite. Integrating cork into the structure of the composite has the opportunity to develop a more eco-friendlier and sustainable product and to improve the adaptive properties of passive control systems used for vibration damping applications operating in the middle and high frequency zones.
Źródło:
Journal of Theoretical and Applied Mechanics; 2022, 60, 4; 593--602
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical and Thermal Properties of Graphene over Composite Materials: A Technical Review
Autorzy:
Islam, Md. Mashrur
Ahmed, Sadman Saffaf
Rashid, Moshiur
Akanda, Md. Masum
Powiązania:
https://bibliotekanauki.pl/articles/107007.pdf
Data publikacji:
2019
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
graphene
composite material
modern electronics
sensors
modern materials
Opis:
The recent years have seen numerous developments in the research and headway of graphene, the thinnest two-dimensional nuclear material. Graphene-based materials and their composites have promising applications in an extensive variety of fields; for example, gadgets, biomedical guides, films, adaptable wearable sensors, and actuators. The most recent investigations and movement in this branch of knowledge regularly deliver conflicting or uncertain outcomes. This article evaluates and outlines the distributed information in order to give a basic and complete diagram of the cutting edge. Initially, the particular basic nature of accessible graphene materials is illustrated as well as the distinctive generation methods accessible thus far. The appraisal at that point talks about the different composites that center diverse sub-practical routines; for example, mechanical and aggregate utilitarian applications (e.g., vitality, hardware biomedical, layers, and sensors). The use of graphene and its subsidiaries in the fabricate of nanocomposites with various polymer frameworks has been inspected. And finally, an ending and point of view are given to talking about the rest of the difficulties for graphene nanocomposites in useful science and building.
Źródło:
Journal of Casting & Materials Engineering; 2019, 3, 1; 19-30
2543-9901
Pojawia się w:
Journal of Casting & Materials Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulations of representative volume elements for random 2D composites with circular non - overlapping inclusion
Symulacje komórki reprezentacyjnej 2D kompozytu z kołowymi nie nachodzącymi na siebie wtrąceniami
Autorzy:
Czapla, R.
Nawalaniec, W.
Mityushev, V.
Powiązania:
https://bibliotekanauki.pl/articles/375673.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
representative volume element
composite material
Eisenstein-Rayleigh sums
Opis:
Consider two-dimensional two-component periodic composite made from a collection of non-overlapping, identical, circular disks, embedded in a matrix. In accordance with a theory of the representative cells (representative volume elements), the effective conductivity of disks is expressed in terms of the generalized Eisenstein-Rayleigh sums (ER sums). Straightforward computation of the ER sums is possible only for the sums of lower orders. In the present paper, a fast algorithm to compute higher order sums worked out by use of random walks and Monte Carlo simulations. The algorithm is recurrent, i.e., an ER sum of the fixed order is expressed in terms of the ER sums of lower orders by simple formulae. Relations between the Eisenstein and Weierstrass functions and algebraic dependences between their derivatives are also used to improve the algorithm. The obtained numerical results are applied to investigation of the structure of composites.
Rozważmy dwuwymiarowy, dwufazowy okresowy materiał kompozytowy, złożony ze zbioru nienakładających sie na siebie identycznych wtrąceń kołowych zanurzonych w osnowie. Zgodnie z teorią komórki reprezentatywnej, efektywna przewodność badanego materiału wyraża się za pomocą uogólnionych sum Eisensteina-Rayleigha (zwanych dalej sumami ER). Bezpośrednie obliczenie sum ER jest możliwe tylko w przypadku sum niższych rzędów. W artykule przedstawiono szybki algorytm obliczający sumy ER wyższych rzędów, opracowany z wykorzystaniem błądzenia losowego oraz metody Monte Carlo. Algorytm ten jest rekurencyjny, tzn. ustalona suma ER wyrażona jest za pomocą sum niższego rzędu. W celu usprawnienia działania algorytmu wykorzystano algebraiczne zależności między funkcjami Eisensteina i Wieierstrassa oraz między ich pochodnymi. Uzyskane wyniki numeryczne zastosowano do badania struktury materiałów kompozytowych.
Źródło:
Theoretical and Applied Informatics; 2012, 24, 3; 227-242
1896-5334
Pojawia się w:
Theoretical and Applied Informatics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of rheological model coefficients of pipeline composite material layers based on spectrum analysis and optimization
Autorzy:
Bogdevičius, Marijonas
Karpenko, Mykola
Bogdevičius, Paulius
Powiązania:
https://bibliotekanauki.pl/articles/1839709.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
composite material
pipeline
spectrum analysis
rheological model
optimization
Opis:
The article presents theoretical and experimental investigation on properties of a composite material based on rubber. The approach presented in this research is an experimental measurement based on spectrum analysis combined with theoretical investigation held to describe a viscous-elastic behaviour of the material. The proposed mathematical model is represented by five rheological parameters of hybrid Maxwell and Kelvin-Voigt elements and includes an optimization task for determination of the stiffness and damping coefficients. In the proposed rheological model, not only the displacements are unknown but also forces described by second-order differential equations. Validation between the experimental measurement and theoretical investigation is made based on spectrum analysis.
Źródło:
Journal of Theoretical and Applied Mechanics; 2021, 59, 2; 265-278
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of Yield Point of Polymer-Based Composite Material in the Conditions of Increased Temperatures
Autorzy:
Arustamian, A.
Sołek, K.
Kalisz, D.
Powiązania:
https://bibliotekanauki.pl/articles/351130.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mechanical properties
yield point
compression test
composite material
Opis:
Theoretical and practical research on the influence of temperature on mechanical characteristics of the composite material MM “Steel 1018” has been conducted. Both laboratory equipment used to measure of mechanical properties, the technique of material preparation and the experimental procedure were described. The analysis of the the obtained results revealed that with temperature increase the material yield point goes down.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 3; 1561-1566
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of coupling agent on antioxidant properties and structure of PP/ cotton stalk lignin composites
Autorzy:
He, Mingyu
Musajian, Dilhumar
Hasan, Gvlmira
Hou,, Gongbo
Yimit, Mamatjan
Powiązania:
https://bibliotekanauki.pl/articles/780085.pdf
Data publikacji:
2020
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
polypropylene
coupling agent
cotton stalk lignin
composite material
Opis:
In this paper, the effects of coupling agent and lignin extracted from waste cotton stalks in Xinjiang on thermaloxygen aging properties of polypropylene (PP) composites were studied. The melt index test and indoor thermal oxygen aging test was carried out on the samples treated with coupling agent. The mechanical properties, surface micromorphology, rheological properties and element composition of the materials before and after 30 days of aging were studied. The results showed that the titanate coupling agent was the best for improving the melt index and mechanical properties of PP/cotton stalk lignin composites. After the 30-day thermal oxygen aging test, the samples with 2% lignin had the best impact strength and retention rate of fracture elongation, reaching 68.9% and 77.3% respectively. The sample with 3% lignin content had the smoothen surface, no crack appeared. After aging, the increase of C=O was the least, and the crystal peak area decreased less.
Źródło:
Polish Journal of Chemical Technology; 2020, 22, 2; 78-85
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design and implementing possibilities of composite pontoon bridge
Możliwości projektowe i wykonawcze kompozytowego mostu pontonowego
Autorzy:
Błażejewski, W.
Filipiak, A.
Barcikowski, M.
Łagoda, K.
Stabla, P.
Lubecki, M.
Stosiak, M.
Śliwiński, C.
Kamyk, Z.
Powiązania:
https://bibliotekanauki.pl/articles/945899.pdf
Data publikacji:
2018
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
pontoon bridge
composite material
prototype
most pontonowy
materiał kompozytowy
prototyp
Opis:
This work focuses on the analysis of actions conducted by the Military Institute of Engineer Technology and Wroclaw University of Science and Technology regarding the production and testing (on proving ground) of composite pontoon bridge. The starting point for this work was the experience gained from the project named „Light, resistant to environmental hazards, aluminum-composite hybrid pontoon used in constructing floating bridges of MLC 70/110 class”. Each one of the three V-shaped outriggers was designed using different technology. The middle part was constructed mostly of aluminum by company PREMO, but the smaller outrigger and all parts of the bow were made at Wroclaw University of Science and Technology from composite material reinforced with glass, aramid and carbon fibers. The inside was filled with multiple types of foam. During successful tests on proving grounds, conducted by Military Institute of Engineer Technology, elements were connected with PP-64 pontoons. It was proven that Wroclaw scientific society is capable of designing and manufacturing of a prototype pontoon bridge park.
W ramach projektu rozwojowego nr 03003906 zespoły Wojskowego Instytutu Techniki Inżynieryjnej i Politechniki Wrocławskiej zaprojektowały i wykonały pierwszy w świecie, całkowicie kompozytowy ponton przeznaczony do budowy mostów pływających. Kompletny prototypowy zespół pontonowy składa się z trzech członów zespolonych w układzie „V” – szerokiego członu centralnego i dwóch dwukrotnie węższych członów bocznych. Człony boczne do transportu składają się zawiasowo na wierzch członu centralnego. Każdy z trzech członów wykonano według różnej technologii. Jeden z nich – całkowicie kompozytowy – wykonano, wykorzystując włókna szklane, węglowe, aramidowe oraz wiele różnego typu pianek. Ponton jest lekki, niezatapialny, o podwyższonej odporności na uszkodzenia mechaniczne, w tym odłamki i przestrzelenie, a także na ogień. W ostatnim etapie prac ponton włączono w przeprawę i testowano przez najeżdżanie kolejno cięższymi pojazdami wojskowymi. Udowodniono słuszność koncepcji wykorzystania materiałów kompozytowych do budowy pontonów.
Źródło:
Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika; 2018, z. 90 [298], 4; 411-420
0209-2689
2300-5211
Pojawia się w:
Zeszyty Naukowe Politechniki Rzeszowskiej. Mechanika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Analysis of a DMA Epoxy-Carbon Composite Study
Analiza numeryczna metodyki badań DMA kompozytu epoksydowo-węglowego
Autorzy:
Kowaleczko, P.
Panas, A.
Nowakowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/403771.pdf
Data publikacji:
2018
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
composite material
DMA
numerical simulation
COMSOL
materiał kompozytowy
symulacja numeryczna
Opis:
The results of numerical simulations performed for Dynamic Mechanical Analysis (DMA) measurements of thermal and mechanical (or thermomechanical) properties performed on a model composite structure are presented herein. The simulated elastic response of an epoxy-carbon fibre composite specimen was analysed for a case by which the model specimen was subjected to three-point bending with a free support. The epoxy-carbon fibre composite studied as explained herein exhibited extreme differences between the elastic properties of the epoxy resin matrix and the carbon fibre reinforcement. In addition, the carbon fibre reinforcement was both internally and structurally anisotropic. The numerical simulations were performed to demonstrate a qualitative dependence of the DMA measurement results on a certain structure of the investigated specimen and to determine if the DMA results could be qualified as effective or apparent. A macro-mechanical model of the specimen was developed and the numerical calculations were performed by applying a COMSOL/M FEM (Finite Element Method) modelling software. The carbon fibre reinforcement was modelled with an orthotropic composite structure of planar laminar inclusions or as a disperse composite with circular inclusions. While modelling different characteristic dimensions of inclusions were taken into account. Representative material properties were assumed from the results of the appropriate experimental investigations and form certain literature reference data. The effect of the composite layer configuration and their characteristic dimensions on the evaluated model elastic modulus value was also studied. The numerical modelling results are in a qualitative agreement with the results of the DMA investigations performed on real composite. They also proved the effectiveness of the developed numerical simulation methodology in modelling of micro- and macromechanical phenomena occurring during the DMA study.
W pracy przedstawiono wyniki numerycznych badań symulacyjnych pomiaru właściwości cieplnomechanicznych (termomechanicznych) struktury kompozytowej. Uwagę skupiono na symulacji sprężystej odpowiedzi próbki kompozytu epoksydowo-węglowego poddanego analizie termomechanicznej DMA (Dynamic Mechanical Analysis) w trybie zginania z trójpunktowym swobodnym podparciem. Kompozyt epoksydowo-węglowy jako obiekt analizy charakteryzuje się bardzo dużą dysproporcją właściwości sprężystych materiału osnowy i wypełnienia. Dodatkowo cechy anizotropii wykazuje już sam materiał wypełnienia w postaci włókien węglowych. Celem wykonanych badań numerycznych było jakościowe określenie wpływu struktury na wyniki badań DMA i określenie możliwości zaklasyfikowania uzyskiwanych wyników jako właściwości efektywnych bądź pozornych. Do opracowania modelu makromechanicznego badanej próbki i przeprowadzenia obliczeń wykorzystano program modelowania MES COMSOL. Wypełnienie włóknami węglowymi modelowano za pomocą ortotropowych wtrąceń warstwowych lub kołowych o różnych wymiarach charakterystycznych. Reprezentatywne dane materiałowe przyjęto na podstawie wyników badań własnych i danych literaturowych. Zbadany został wpływ rozmieszczenia poszczególnych warstw oraz ich wymiaru charakterystycznego na określany z modelowej zależności moduł sprężystości E’.
Źródło:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa; 2018, 9, 4 (34); 101-112
2081-5891
Pojawia się w:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aramid composites after fragment-proof test by ultrasonic ir thermography
Autorzy:
Pracht, M.
Świderski, W.
Powiązania:
https://bibliotekanauki.pl/articles/245923.pdf
Data publikacji:
2017
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
ultrasonic IR thermography
composite material
aramid fabrics
ballistic protection
Opis:
Modern soft ballistic armour is composed of high-strength fibres often used as packages of loose fabrics or laminates. These fibres include carbon, glass fibres, polymer fibres including aramid fibres and polyethylene fibres. Soft armour is applied to provide ballistic protection typically against the impact of small arms projectiles and fragments. In order to determine the level of ballistic protection for ballistic armour, fragment-simulating projectiles (FSP) are used which simulate the properties of fragments created during the explosion of various types of grenades and projectiles. The above-mentioned composites can include a variety of defects such as manufacturing defects, moisture ingress, projectiles impact and other defects. Infrared thermography is a method, which can be used to non-destructive testing and detecting defects of this type of material. However, ultrasonic stimulation is one of method of thermal stimulation used for detection defects in composite. The article presents the results of experimental research of multilayer aramid composite after fragment-proof tests by ultrasonic IR thermography method.
Źródło:
Journal of KONES; 2017, 24, 2; 191-195
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Surface Treatments on Cast-Bonding Characteristics of Steel-Aluminum Hybrid Composite Materials
Autorzy:
Kim, Hyo-Jung
Kim, Tae Hyeong
Shin, Je Sik
Park, Seung Yeon
Hyun, Soongkeun
Lim, Kyoung Mook
Powiązania:
https://bibliotekanauki.pl/articles/353007.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast-bonding
aluminum
steel sheet
composite material
bonding surface
Opis:
In this study, we investigated the bonding mechanism of surface-treated steel with an Al-Si alloy in order to produce steel-aluminum (STL-Al) hybrid composite materials by cast-bonding. The results showed that there are differences in the phase and properties of the hybrid composite materials bonded specimens depending on the surface treatment of the steel sheet used, and that the bonding conditions can be controlled further by detailed conditions of the surface treatment. Based on the interfacial bonding strengths measured here, the galvanized surface treatment induced metallurgical bonding to form a reaction layer on the bonding surface and was determined to be the most effective surface treatment.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 3; 889-892
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of load transfer into composite structure
Autorzy:
Szymczyk, E.
Jachimowicz, J.
Puchała, K.
Powiązania:
https://bibliotekanauki.pl/articles/118025.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Promocji Wiedzy
Tematy:
mechanical joint
adhesive joint
composite material
load transfer
FEA
Opis:
The paper presents advantages and disadvantages of metal foils insertion between composite layers. Composites are complex materials of aniso-tropic structure leading to various failure mechanisms. Mechanism of compressive load transfer into composite laminates by shear of the matrix is analysed. The method of improvement compressive strength of laminates is presented according to literature and analysed for a sele-cted case. Simplified models of a laminate structure modified using various metal foils configurations are analysed with MSC.Marc code. Axial stress in prepreg layers and shear stress in adhesive layers are studied.
Źródło:
Applied Computer Science; 2014, 10, 3; 86-94
1895-3735
Pojawia się w:
Applied Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of image analysis methods on the example of ultrasonic thermography of an aramid composite
Autorzy:
Świderski, Waldemar
Powiązania:
https://bibliotekanauki.pl/articles/244857.pdf
Data publikacji:
2019
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
non-destructive testing
composite material
IR thermography
image analysis
Opis:
Infrared thermography using ultrasound thermal excitation of the tested material is one of the most effective methods in non-destructive testing of a multi-layer aramid composite. This type of material is very popular in the construction of light ballistic armours. Typical defects are delamination between layers of aramid fabric joined by resin. They are usually filled with air. Delamination located deep under the surface of the test generates very weak temperature signals. They are often at the level of noise. To reduce the impact of noise on the detection of a defect, special methods of image analysis (thermograms) are used. Such methods include principal component analysis and wavelet analysis. Principal Component Analysis is a relatively new procedure of statistical data treatment, which is becoming increasingly popular in non-destructive testing. Mathematically, it is often regarded as implementation of the so-called singular values decomposition technique, which allows extracting of spatial information from a matrix of source data. The wavelet analysis is an integral transform, which represents the convolution of an analysed process with a special mother function called wavelet. Wavelets are characterized by two parameters: scale and shift. The paper presents a comparison of the efficacy of these methods in the detection of defects in the multilayer composite reinforced aramid fibre.
Źródło:
Journal of KONES; 2019, 26, 2; 145-150
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Własności trybologiczne materiałów kompozytowych na bazie stopów EN AW-2024 i EN AW-7075
Autorzy:
Kurzawa, A.
Granat, K.
Grodzka, E.
Naplocha, K.
Kaczmar, J. W.
Powiązania:
https://bibliotekanauki.pl/articles/381611.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
materiał kompozytowy
tlenek glinu
własności trybologiczne
composite material
alumina
tribological properties
Opis:
W pracy zostały przedstawione wyniki badań intensywności zużycia ściernego materiałów kompozytowych na bazie stopów EN AW-2024 i EN AW-7075 umacnianych cząstkami ceramicznymi Al2O3. Materiały zawierające 10÷40%obj. cząstek umacniających wytworzone metodą squeeze casting poddano ścieraniu z zastosowaniem metody pin-on-disc. Pozytywny efekt wzrostu odporności na zużycie ścierne potwierdzono dla materiałów opartych na stopie 7075 umocnionych od 10 do 30%obj. Al2O3. Umocnienie cząstkami stopu 2024, chociaż nieznacznie podniosło ich odporność na ścieranie przy zawartościach objętościowych cząstek ceramicznych 10 i 20% obj. to nie jest jednak satysfakcjonujące. Siła docisku próbki wpływa w zasadniczy sposób na intensywność zużycia materiałów kompozytowych. Pod mniejszym ciśnieniem 0,2 MPa pomiędzy próbką a tarczą materiały kompozytowe wykazały ok. 2-3 krotnie większą odporność na zużycie w porównaniu do stopu nieumocnionego. Zwiększenie ciśnienia do 1,0 MPa i 1,2 MPa spowodowało zwiększenie szybkości zużycia próbek, w szczególności dla materiałów zawierających 40% obj. cząstek Al2O3. Materiały kompozytowe na osnowie stopu AW-2024 generowały o ok 20÷25% większe opory tarcia od materiałów wytworzonych na osnowie stopu AW-7075. W wyniku analizy powierzchni ścierania stwierdzono, że wraz ze wzrostem zawartości objętości cząstek umacniających zmieniał się charakter zużycia z mieszanego, adhezyjno-ściernego występującego w kompozytach z 10% obj. cząstek Al2O3 w typowo ścierne występujące w materiałach zawierających 40% obj. udział umocnienia. Stopień zużycia przeciwpróbki silnie zależał od użytego materiału osnowy. Pomimo że stop nieumocniony AW-2024 wpływał na zużycie żeliwnej tarczy wolniej od stopu AW-7075, to jednak w materiałach zawierających umocnienie tendencja była odwrotna. Chropowatość Ra dna rowka przeciwpróbki potwierdza głębsze bruzdowanie przy ścieraniu kompozytów wytworzonych na osnowie stopu AW-2024. Największą chropowatość wykazały powierzchnie tarcz na których ścierano próbki z zawartością 10% obj. cząstek. Wraz ze wzrostem udziału cząstek w materiałach kompozytowych chropowatość przeciwpróbki maleje.
Źródło:
Archives of Foundry Engineering; 2013, 13, 1 spec.; 97-102
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical analysis of composite structures with embedded piezoelectric active elements
Autorzy:
Dębski, H.
Latalski, J.
Powiązania:
https://bibliotekanauki.pl/articles/248153.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
composite material
smart structure
piezoelectricity
numerical simulation
PZT
macro fibre composite transducer
Opis:
The paper presents a numerical simulation of active multiple layer composite beams in bending test. Within framework of performed analysis glass-epoxy and carbon-epoxy laminates with integrated piezoelectric actuators were considered. In the research macro fiber composite (MFC) type transducers exhibiting d33 effect were used. The numerical models and further calculations were done in ABAQUS/Standard FEM software. Discrete models of the considered composite beam structures were formulated according to the Layup-Ply technique. In performed tests nonlinear geometric effects corresponding to large structural deflections were taken into account. The resulting state equations were solved by means of Newton-Raphson iterative method. Finally, the findings of numerical simulations were compared to the outcomes of laboratory experiments. A very good agreement of numerical and experimental results was achieved; this confirmed the assumptions made to the numerical model and further modelling technique. Numerical model of the piezoelement, analysis of a composite beam with piezoelectric patch, numerical tests for the separated M-8503-P1 piezoelement, electric boundary conditions for the examined actuator, strain state of a glass-epoxy laminate, laboratory test-stand, numerical and laboratory experiment results are presented.
Źródło:
Journal of KONES; 2012, 19, 1; 51-69
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kolektor z kompozytu alternatywą odlewu
Autorzy:
Micker, A.
Owsiński, R.
Powiązania:
https://bibliotekanauki.pl/articles/382134.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
materiał kompozytowy
kolektor dolotowy
ochrona środowiska
composite material
intake manifold
environment protection
Opis:
W artykule przedstawiono nowoczesną alternatywną metodę wykonywania elementów z materiałów kompozytowych, które do tej pory wykonywane były wyłącznie na drodze odlewania. Przedstawione zostały zalety wynikłe z zastosowania tej technologii i materiałów inżynierskich do produkcji kolektora dolotowego do silnika. Zastosowanie technologii wykonywania kolektora z kompozytu będzie miało również korzystny wpływ na środowisko.
Źródło:
Archives of Foundry Engineering; 2011, 11, 2 spec.; 149-151
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Possibilities of Using Low-Density C-C Composites for Thermal Protection of Small Unmanned Aerial Vehicles
Autorzy:
Yanko, Taras
Datsenko, Roman
Karpenko, Hanna
Powiązania:
https://bibliotekanauki.pl/articles/36818980.pdf
Data publikacji:
2023
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
carbon-carbon composite material
low-density
fibre
laser weapon
carbonisation
Opis:
The study demonstrates the possibilities of using, as well as the features associated with the use of, unmanned aerial vehicles (UAVs) for military and peaceful purposes. Information is provided on the need to use components that would contribute towards ensuring thermal protection against modern laser weapons. The requirements for such materials are given, according to the field of application of the UAV. An analysis of the available materials that can be used to create thermal protection of UAVs against laser weapons is provided. The thermophysical characteristics of various materials are presented. The work presents technological features of production and properties of low-density carbon-carbon composite materials (CCCM). It is proposed to consider the prospects of using CCCM materials for not only the UAV structural components but also other purposes.
Źródło:
Transactions on Aerospace Research; 2023, 2 (271); 45-57
0509-6669
2545-2835
Pojawia się w:
Transactions on Aerospace Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowy materiał konstrukcyjny : kompozyt
New material of construction : composite
Autorzy:
Kwiatkowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/2068299.pdf
Data publikacji:
2014
Wydawca:
Politechnika Częstochowska
Tematy:
materiał kompozytowy
kompozyt
naprężenie
taśma węglowa
wzmocnienie konstrukcji
composite material
composite
stress
carbon tape
construction reinforcement
Opis:
W pracy przedstawiono ogólne zależności obliczania naprężeń w materiałach kompozytowych. Omówiono także ich wykorzystanie w różnych gałęziach przemysłu. Pokazano też przykłady zastosowania taśm węglowych do wzmacniania konstrukcji.
The paper presents general dependences concerning the calculation of stresses in composite materials and their application in different branches of industry. The examples of the carbon tapes applications to construction reinforcement are also shown.
Źródło:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo; 2014, 20 (170); 127--132
0860-7214
Pojawia się w:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie badań nieniszczących w podczerwieni wielowarstwowych materiałów kompozytowych
Autorzy:
Świderski, W.
Powiązania:
https://bibliotekanauki.pl/articles/235233.pdf
Data publikacji:
2007
Wydawca:
Wojskowy Instytut Techniczny Uzbrojenia
Tematy:
termografia w podczerwieni
badania nieniszczące
materiał kompozytowy
IR termography
nondestructive testing
composite material
Opis:
W artykule przedstawiono możliwości wykorzystania termografii w podczerwieni w badaniach nieniszczących do wykrywania cienkich wad w wielowarstwowych materiałach kompozytowych. Do symulacji komputerowych wykorzystano oprogramowanie 3D opracowane do analizy przejściowych stanów przewodnictwa ciepła.
Źródło:
Problemy Techniki Uzbrojenia; 2007, R. 36, z. 102; 115-127
1230-3801
Pojawia się w:
Problemy Techniki Uzbrojenia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of thermal signal characteristics on defect detection in GFRP by active optical thermography
Autorzy:
Świderski, W.
Powiązania:
https://bibliotekanauki.pl/articles/247929.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
non-destructive testing
composite material
IR thermography
badania nieniszczące
materiał kompozytowy
termografia IR
Opis:
Advances in technological development, since the 1990s, has been associated with the development of two basic domains of knowledge: information technology and material engineering. The development of material engineering is directly related to composite materials. One group of composite materials are fibre-reinforced composites. Due to their unique properties, they are used in various fields of engineering sectors. Composites reinforced with glass fibre (GFRP) are the second most commonly used composite after carbon fibre reinforced composites (CFRP). GFRP in many cases can replace traditional structural materials, which are usually made from metal. Of course, this material is exposed to damage both in production and operation phases. One method of non-destructive testing that effectively identifies defects in GFRP is active optical thermography. In this method, for thermal stimulation of the tested material, various types of heat sources are used for example: heating lamps, lasers etc. This article analyses the influence of the characteristics of the thermal optical sources on detection of typical defects in GFRP.
Źródło:
Journal of KONES; 2018, 25, 1; 379-383
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vibration control using a modern control system for hybrid composite flexible robot manipulator Arm
Autorzy:
Ramalingam, S.
Mohideen, S. Rasool
Powiązania:
https://bibliotekanauki.pl/articles/27314189.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
composite material
Al6082 alloy
simulation analysis
vibration amplitude
LQR controller
Opis:
In this research, a model of a robotic manipulator flexible structure and an equation of motion for controller design is planned. The structural material chosen for the robot structure was a hybrid composite. A comparison study was carried out for the aluminium 6082 alloy for the flexible manipulator arm application. Vibration behavior and control implementation was analyzed by adding joint flexibility in the system. Using a simulation algorithm, the system parameter calculation is carried out through MATLAB software for vibration amplitude, transient period, steady-state error, and settling time of flexible robotic arm system. In a systematized motion equation, flexible robotic deflections are organized via the assumed mode (AM) and Lagrange techniques (LT). The graph analysis of hybrid composite and AL6082 materials with high stiffness coefficients is plotted. These obtained values from the plot are utilized for Linear Quadratic Regulator (LQR) controller design. The LQR output facts for both aluminium structural robotic arm and composite material robotic arms are established.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2022, 16, 2; 36--45
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A feasibility study of synthetic substances used for the sealing of old workings transformed into underground gas storages
Autorzy:
Rybicki, Cz.
Chromik, M.
Powiązania:
https://bibliotekanauki.pl/articles/299139.pdf
Data publikacji:
2014
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
mining excavation
mining well
composite material
sealing up of rock mass
Opis:
In the now both in the world and in Poland grows the meaning of underground gas storages. Except storages located in depleted gas reservoirs salt caverns the attention deserve storages in mining-excavations. In this type gas storages it exists the problem of the seal of the rock massive. For that purpose comply different methods among other things the housing with the steel-cloak and the water curtain. Authors of the article propose the innovative method of sealing up of the rock massive at the use of plastics as composites. The article has a generał character because in practice this method was not applied. In opinion of authors this method seems to be interesting and effective.
Źródło:
AGH Drilling, Oil, Gas; 2014, 31, 4; 485-493
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Possibility of defects detection by ir thermography in multi-layered polyaramide materials used for military applications
Autorzy:
Panas, A.
Pracht, M.
Świderski, W.
Powiązania:
https://bibliotekanauki.pl/articles/242822.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
infrared thermography
non-destructive testing
composite material
aramide fabrics
light armours
Opis:
Recently the composite materials have been often applied in designs of light ballistic protections as the progress in domain of polymers chemistry has made possible the production of materials providing efficient protection against small arms bullets and fragments. Usually the composites apply textile materials joined with plastic what creates multi-layered composite materials used for personal ballistic protections (vests and helmets for shots and fragments protection) and armours of car vehicles and stationary objects. This type of composite materials is largely made on the basis of very resistant aramid and polyethane fibres joined with phenolic and polyurethane resins and other elastic mixtures. These materials are characterized as lightweight, non-corrosive and easy to form what makes them fit well to the surface, which they have to protect. Defects, which can appear in this type of multi-layered composite materials usually, are inaccuracies in gluing the composite layers and stratifications and delaminations occurring under hits of fragments and bullets. A method that possibly can be used to non-destructive testing of this type of materials and detection of internal defects deploys infrared thermography. In order to determine the potential use of thermal methods the specialized software was developed for computing 3D (three-dimensional) dynamic temperature distributions in anisotropic multi-layered solid body with subsurface defects. The paper includes some results of simulation representing possibilities for the use of IR thermography methods to test such composite materials.
Źródło:
Journal of KONES; 2014, 21, 2; 243-250
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of thermal cycling on the tensile behavior of Cf/Al fiber metal laminates
Autorzy:
Noor, M. F.
Pasha, R. A.
Wakeel, A.
Nasir, M. A
Bilal, Y.
Powiązania:
https://bibliotekanauki.pl/articles/102771.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
composite material
aluminum
anodizing process
carbon fiber
thermal cycling
tensile strength
Opis:
The objective of this research work was to estimate the effect of thermal cycling on the tensile behavior of CARALL composites. Fiber metal laminates (FMLs), based on 2D woven carbon fabric and 2024-T3 Alclad aluminum alloy sheet were manufactured by pressure molding technique followed by hand layup method. Before fabrication, aluminum sheets were anodized with phosphoric acid to produce a micro porous alumina layer on surface. This microporous layer is beneficial to produce a strong bond between the metal and fiber surfaces in FMLs. The effect of thermal cycling (-65 to +70ºC) on the tensile behavior of Cf/Al based FML was studied. Tensile strength was increased after 10 thermal cycles, but it was decreased slightly to some extent after 30 and 50 thermal cycles. Tensile modulus also show similar behavior as that of tensile strength.
Źródło:
Advances in Science and Technology. Research Journal; 2017, 11, 3; 80-86
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Volume Percentage of Reinforcement on the Microstructure and Mechanical Properties of an Al6061-T6/SiC Surface Composite Fabricated Through Friction Stir Processing
Autorzy:
Ansari, Abdul Jabbar
Anas, Mohd
Powiązania:
https://bibliotekanauki.pl/articles/2201914.pdf
Data publikacji:
2023
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
friction stir processing
AMMCs
aluminium metal matrix composite
silicon carbide
microstructure
surface composites
composite material
Opis:
In this research, aluminium metal matrix composites (AMMCs) have been manufactured through friction stir processing (FSP) by reinforcing nano-sized SiC particles in an Al6061-T6 alloy. The consequences of the volume percentage of reinforced SiC particles on mechanical properties and microstructural features were analyzed for the developed AMMCs. Microstructural evaluation of a cross-section of a friction stir processed (FSPed) sample has been conducted through Electron backscatter diffraction (EBSD) Energy dispersive spectroscopy (EDS) and a scanning electron microscope (SEM) technique. Microhardness tests were conducted athwart the cross section of FSPed specimen to obtain microhardness feature. A tensile test of FSPed samples has been conducted on a universal testing machine (UTM). Homogeneous distributions of SiC particles were found in the stir zone without any consolidation of particles. The size of the reinforcement particles was decreased slightly by increasing the volume fraction. It has been found that increasing the volume fraction of SiC particles, enhance the tensile strength and microhardness, but decreases the ductility of the aluminium. The maximum ultimate tensile strength (UTS) and microhardness were obtained as 390 MPa and 150.71 HV, respectively, at 12% volume percentage of reinforcement particles. UTS and microhardness of the FSPed Al/SiC have been improved by 38.29% and 59.48% respectively as compared to Al6061-T6. The brittle nature of the FSPed Al/SiC has increased due to a rise in the volume fraction of nanosized SiC particles, which causes a decrease in ductility.
Źródło:
Advances in Science and Technology. Research Journal; 2023, 17, 2; 247--257
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Residual strength assessment of wind turbine rotor blade composites under combined effects of natural aging and fatigue loads
Autorzy:
Gao, Jian-Xiong
An, Zong-Wen
Ma, Qiang
Bai, Xue-Zong
Powiązania:
https://bibliotekanauki.pl/articles/1841943.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
wind turbine rotor blade
natural aging
fatigue loads
residual strength
composite material
Opis:
In this paper, the combined effects of natural aging and fatigue loads are considered to assess the residual strength of wind turbine rotor blade composites under actual service environments. Firstly, a comprehensive environmental factor (CEF) methodology is adopted to quantify the combined effects of environmental factors on residual strength. Meanwhile, the artificial accelerated aging test data are used to determine the weight coefficients of the CEF. Subsequently, a two-variable function is presented to characterize the relationship among residual strength, aging time and the CEF. The natural aging test data are utilized to estimate the unknown parameters of the two-variable function. Finally, the combined effects of natural aging and fatigue loads are considered, and a residual strength model is proposed to analyze the strength degradation behaviors of the wind turbine rotor blade composites. The results indicate that fatigue loads have negative effect on the residual strength, while natural aging has both positive and negative effects on the residual strength.
Źródło:
Eksploatacja i Niezawodność; 2020, 22, 4; 601-609
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie polimerów w konstrukcjach okrętowych układów napędowych : problemy w diagnozowaniu
Application of polymers in construction of the marine propulsion systems : problems in diagnosing
Autorzy:
Grządziela, A.
Powiązania:
https://bibliotekanauki.pl/articles/278246.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Inżynierii Materiałów Polimerowych i Barwników
Tematy:
materiał kompozytowy
materiał polimerowy
laminat
konstrukcje okrętowe
diagnostyka
composite material
polymeric material
laminate
construction of ships
diagnostics
Opis:
Zastosowanie materiałów polimerowych w konstrukcjach okrętów wojennych rozpoczęło się powszechnie w latach 70-tych XX wieku. W okresie tym istniejąca technologia umożliwiała wykorzystanie tych materiałów najpierw do konstrukcji laminatowych kadłubów a następnie w realizacji elementów napędowych i strukturalnych. Początkowy zachwyt własnościami materiałów laminatowych został wyparty wieloma wątpliwościami oraz pytaniami dotyczącymi możliwościami modelowania cech fizycznych, trwałości, odporności pożarowej i udarowej, oddziaływaniem na środowisko i użytkownika oraz możliwościami oceny degradacji stanu technicznego w trakcie eksploatacji. Referat przedstawia współczesny zakres stosowalności materiałów kompozytowych w konstrukcjach okrętowych oraz problematykę diagnozowania i realizacji napraw doraźnych.
Applications of laminate materials in the construction of warships began generally in the 70s of the twentieth century. Existing technology enabled the use of laminate materials first to the structure of fiberglass hulls and in the implementation of the drive elements and structural characteristics. The initial enthusiasm of laminates properties has been forced out by many doubts and questions about the modeling capabilities of physical characteristics. Moreover, next questions arisen regarding the durability, fire and impact resistance and finally possibilities assessment of the technical state. The paper presents contemporary scope of application of composite materials in the construction of ships and the issue of diagnosis and implementation of emergency repairs.
Źródło:
Przetwórstwo Tworzyw; 2016, T. 22, Nr 1 (169), 1 (169); 11-15
1429-0472
Pojawia się w:
Przetwórstwo Tworzyw
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rola wymiaru cząstek w procesie formowania struktury proszku kompozytowego metodą syntezy mechanicznej
The role of particle size in the process of forming the structure of a composite powder by mechanical alloying
Autorzy:
Gładki, A.
Wójcik-Grzybek, D.
Frydman, K.
Powiązania:
https://bibliotekanauki.pl/articles/192084.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Materiałów Elektronicznych
Tematy:
materiały kompozytowe
materiały stykowe
synteza mechaniczna
modelowanie struktur
composite material
contact material
modeling of structures
Opis:
Publikacja stanowi podsumowanie prac teoretycznych i doświadczalnych związanych z prognozowaniem struktury i otrzymywaniem materiałów kompozytowych z osnową srebrową i kruchymi fazami wzmacniającymi. Dwa modele geometryczne: model pokrycia powierzchniowego (MPP) i model gęstego upakowania (MGU) cząstek sferycznych w i na cząstce kulistej zostały zespolone z podstawowym równaniem procentu objętościowego faz wzmacniających w osnowie. W ten sposób uzyskano przestrzeń, w której kierując się zasadami dynamiki można przewidzieć strukturę kompozytów otrzymywanych metodą syntezy mechanicznej (MS). Prognozowanie modelowe zweryfikowano na dziewięciu zaplanowanych materiałach kompozytowych stosowanych na styki elektryczne, ograniczając się do układów kompozytowych złożonych z osnowy plastycznej i kruchych faz wzmacniających.
This publication provides a summary of theoretical and experimental research related to forecasting the structure and obtaining composite materials with a silver matrix and fragile reinforcing phases. Two geometrical models, i.e. a model of the surface coating (MSC) and high-density model (MHD) of spherical particles in and on a spherical particle have been combined with a basic equation of the volumetric percentage of the reinforcing phase in the matrix. This has provided a space where the structure of the composites obtained by mechanical alloying (MA) can be predicted when guided by the principles of dynamics. The model forecasting has been verified using nine previously selected composite materials applied in electrical contacts, limited to systems composed of a plastic composite matrix and brittle reinforcement phases.
Źródło:
Materiały Elektroniczne; 2012, T. 40, nr 3, 3; 3-16
0209-0058
Pojawia się w:
Materiały Elektroniczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ przygotowania powierzchni zębiny kanałowej na jej adhezję do materiału Herculite
The influence of the preparation of the radicular dentine surface on its adhesion to Herculite material
Autorzy:
Skórska-Jasak, A.
Sokołowski, G.
Klimek, L.
Pawlicka, H.
Powiązania:
https://bibliotekanauki.pl/articles/286098.pdf
Data publikacji:
2009
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
adhezja
zębina korzeniowa
EDTA
kwas cytrynowy
materiał kompozytowy
adhesion
radicular dentine
citric acid
composite material
Opis:
Celem pracy jest porównane wpływu EDTA i kwasu cytrynowego na adhezję pomiędzy zębiną korzeniową a materiałem kompozytowym Herculite. Właściwa adhezja pomiędzy materiałami wypełniającymi a strukturą zęba, stanowi odpowiednie zabezpieczenie przed mikroprzeciekiem, niezbędne do uzyskania zadawalających efektów w leczeniu stomatologicznym. Do badań użyto 40 korzeni ludzkich zębów trzonowych usuniętych ze względów stomatologicznych. Dwadzieścia losowo wybranych zębów przecinano prostopadle w stosunku do długiej osi korzenia zęba (grupa I), kolejne 20 równolegle (grupa II). Następnie poprzeczne (grupa I) i podłużne przekroje zębów (grupa II) podzielono losowo na dwie podgrupy: a i b po 10 zębów każda, aktywowano roztworami powszechnie stosowanymi w leczeniu endodontycznym i wytrawiono 37% kwasem ortofosforowym. Próbki zębów wszystkich grup pokryto systemem wiążącym Opti-Bond Solo Plus i spolimeryzowano. Na przygotowane w ten sposób powierzchnie, przy pomocy specjalnej formy o średnicy 3 mm, nanoszono materiał Herculite. Badania wykazały, że nie występują różnice istotne statystycznie w wytrzymałości na ścinanie pomiędzy połączeniem materiału Herculite z powierzchnią zębiny. Również ułożenie kanalików zębinowych w stosunku do powierzchni połączenia nie wpływa na ich wytrzymałość na ścinanie.
The aim of this study is to compare the influence of EDTA and citric acid on adhesion between radicular dentine and composite material Herculite. Appropriate adhesion between filling material and tooth structure constitutes proper protection against coronal leak-age, indispensable to achieve a satisfactory effects in dentistry treatment. Forty human teeth molars roots, removed from dentistry indications were used in this study. Twenty randomly selected teeth were sliced perpendicularly to the long axis of dental radices (I group), following 20 parallely (group II). In the group I dentinal tubules were parallel to the analysed surface, whereas in group II perpendicular. Transversal and longitudinal teeth profiles were randomly divided into two subgroups of ten teeth each and activated by solutions which are commonly used in endodontic treatment and 37% ortophosphoric acid. Slices of all teeth were covered with a bonding system OptiBond Solo Plus and light cured. On the surfaces prepared in this way, Herculite composite material with using special form of 3 mm in diameter, was applied. The findings reveal that there are not statistical differences in shear strength between the dentine and Herculite material. Also the direction of the dentinal tubules does not influence the shear strength of the analysed samples.
Źródło:
Engineering of Biomaterials; 2009, 12, 85; 19-22
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experience of modern composite materials usage in boreholes construction at cross-border region
Autorzy:
Sobol, K.
Terlyha, V.
Kovalchuk, M.
Tershak, B.
Powiązania:
https://bibliotekanauki.pl/articles/2068313.pdf
Data publikacji:
2014
Wydawca:
Politechnika Częstochowska
Tematy:
materiał kompozytowy
otwór wiertniczy
złoże gazu
złoże ropy
composite material
borehole
gas deposit
oil deposit
Opis:
In the article there were presented the results of modern composite materials for cementing the boring casing during the construction of boreholes at oil-and-gas deposits of Pry-Carpathians region. Implemented investigations evidenced the effectiveness of use of composite oil-well and oil-and-gas materials and deposit.
Źródło:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo; 2014, 20 (170); 250--257
0860-7214
Pojawia się w:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Homogenization techniques of unidirectional composite material
Autorzy:
Kormaníková, E.
Powiązania:
https://bibliotekanauki.pl/articles/131555.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Komisja Inżynierii Budowlanej PAN Oddział w Katowicach
Tematy:
homogenization technique
unidirectional lamina
fiber matrix composite material
technika homogenizacji
homogenizacja
kompozyt włóknisty
Opis:
The paper deals with analytical and numerical homogenization of unidirectional fiber matrix composite. There are described the Mori-Tanaka method, periodic analytical model and numerical periodic and hexagonal models. The example of homogenization is solved by programs Heat and Elasticity Properties, MATLAB and ANSYS. The obtained results are summarized in the table and compared to each other.
Źródło:
Roczniki Inżynierii Budowlanej; 2015, 15; 79-83
1505-8425
Pojawia się w:
Roczniki Inżynierii Budowlanej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania wytrzymałości na ściskanie materiałów kompozytowych na osnowie stopu AW-AlCu4Mg2Mn umacnianych cząstkami SiC
The compression strength investigations of AW-AlCu4Mg2Mn alloy based composites reinforced with SiC particles
Autorzy:
Kurzawa, A.
Kaczmar, J. W.
Powiązania:
https://bibliotekanauki.pl/articles/380442.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
materiał kompozytowy
kształtka ceramiczna
krzywa płynięcia
infiltracja ciśnieniowa
composite material
ceramic chip
flow curve
pressure infiltration
Opis:
W pracy przedstawiono wyniki badań wytrzymałości na ściskanie materiałów kompozytowych na osnowie stopu AW-AlCu4Mg2Mn. Materiały do badań zostały wytworzone metodą infiltracji pod ciśnieniem stopem AW-AlCu4Mg2Mn porowatych kształtek ceramicznych wykonanych z cząstek SiC o wielkości 6÷10μm. Praca zawiera analizę przebiegu σ-ε materiałów kompozytowych dla zawartości cząstek SiC wynoszących 10, 20, 30% obj. oraz stopu nieumocnionego. Ponadto przedstawiono analizę mikroskopową powierzchni złomów próbek w płaszczyźnie równoległej do działania siły ściskającej. Wykazano, że badane kompozyty charakteryzują się wyraźnym zmniejszeniem wartości odkształcenia plastycznego wraz ze wzrostem zawartości cząstek umacniających. Materiały nieumocnione w całym zakresie odkształceń wykazują znaczną plastyczność. W przypadku materiałów zawierających 10%obj. SiC w zakresie odkształceń plastycznych następuje nieznaczne umocnienie materiału. Wprowadzenie większej objętości cząstek umacniających do materiałów kompozytowych powoduje znaczne zmniejszenie plastyczności materiałów. Próbki z materiałów o objętości 20 i 30%obj. cząstek SiC ulegają kruchemu pękaniu przy znacznie większych wartościach naprężeń σ.
In this paper strength tests of composite materials based on AW-AlCu4Mg2Mn obtained in uniaxial compression test was studied. Materials used for examination were made from AW-AlCu4Mg2Mn alloy and porous preforms of SiC particles (grain size 6÷10μm) by pressure infiltration (squeeze casting). The stress-strain curves of the materials with 10% vol., 20% vol., 30% vol. particles of SiC, as well unreinforcement alloy and microstructure of scrap surface samples in a plane parallel to the compressive force were analyzed. The investigated metal matrix composites are characterized by marked reduced the plastic strain values with increasing particle strengthening while the unreinforcement materials throughout the range of deformation show considerable plasticity. In the case of the material containing 10% vol of SiC the plastic strain is a slight strengthening of the material. With increasing of the particle content the plasticity decreases. Materials with 20%vol and 30%vol of SiC particles were brittle cracked at much higher values of stress σ.
Źródło:
Archives of Foundry Engineering; 2011, 11, 2 spec.; 139-142
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Residual life estimation of fabricated humidity sensors using different artificial intelligence techniques
Autorzy:
Bhargava, C.
Aggarwal, J.
Sharma, P. K.
Powiązania:
https://bibliotekanauki.pl/articles/201564.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
composite material
artificial intelligence
humidity sensor
accelerated life testing
SEM
materiał kompozytowy
sztuczna inteligencja
czujnik wilgotności
Opis:
Background: a humidity sensor is used to sense and measure the relative humidity of air. A new composite system has been fabricated using environmental pollutants such as carbon black and low-cost zinc oxide, and it acts as a humidity sensor. Residual life of the sensor is calculated and an expert system is modelled. For properties and nature confirmation, characterization is performed, and a sensing material is fabricated. Methodology: characterization is performed on the fabricated material. Complex impedance spectroscopy (CIS), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM) are all used to confirm the surface roughness, its composite nature as well as the morphology of the composite. The residual lifetime of the fabricated humidity sensor is calculated by means of accelerated life testing. An intelligent model is designed using artificial intelligence techniques, including the artificial neural network (ANN), fuzzy inference system (FIS) and adaptive neuro-fuzzy inference system (ANFIS). Results: maximum conductivity obtained is 6.4£10−3 S/cm when zinc oxide is doped with 80% of carbon black. Conclusion: the solid composite obtained possesses good humidity-sensing capability in the range of 30–95%. ANFIS exhibits the maximum prediction accuracy, with an error rate of just 1.1%.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2019, 67, 1; 147-154
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison crack resistance of RC beams with and without transverse reinforcement after shear testing
Autorzy:
Vegera, Pavlo
Khmil, Roman
Vashkevych, Rostyslav
Blickharskyy, Zinoviy
Powiązania:
https://bibliotekanauki.pl/articles/104011.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
RC beam
crack resistant
shear
composite material
FRCM
belka RC
odporność na pękanie
ścinanie
materiał kompozytowy
Opis:
Main parameters, which characterize shear strength, are crack distribution, width of diagonal crack opening and angle of inclined crack. There are in this article, comparison crack resistant of testing reinforced concrete (RC) beams on the shear with such variable parameters like presence or absence internal reinforcement, different shear span, and presence or absence external composite reinforcement. Shear span (relative span to effective depth ratio) was acquired the following values: a/d=2, 1.5, 1. For internal reinforcement, rebar’s A240C with diameter 8 mm and steps 100 mm was chosen. The composite FRCM system was like external reinforcement with three stripe of composite fabric with width 70 mm and step 100 mm. Eight RC beams were tested. After testing, we discovered that the most influenced on the serviceability capacity was shear span. Internal transverse reinforcing increased shear strength on the same level and it was independent from shear span and other factors. Only quantity of reinforcing determine level of increasing shear capacity. FRCM system is efficient strengthening system, which significant increase shear crack resistant for RC beams. External FRCM reinforcing increase shear crack resistance on the same percentage and independent from presence or absence internal reinforcement.
Źródło:
Quality Production Improvement - QPI; 2019, 1, 1; 342-349
2657-8603
Pojawia się w:
Quality Production Improvement - QPI
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Tests of a Property of Composite Material Assigned for Ballistic Products
Badania eksperymentalne właściwości wytrzymałościowych kompozytów stosowanych na osłony balistyczne
Autorzy:
Czechowski, L.
Jankowski, J.
Kubiak, T.
Powiązania:
https://bibliotekanauki.pl/articles/234056.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
materiał kompozytowy
badania eksperymentalne
próba rozciągania
testy rozwarstwienia
composite material
experimental study
tensile test
delamination test
Opis:
An empirical investigation of a selected static property of a composite is presented in this paper. For the purpose of studying the quality and property of multilayer composite material assigned for manufacturing some ballistic products, the following were conducted: tensile test, hardness test, bending test and delamination test. Before the tests were carried out, procedures were created for each of them. Selected results of the tests performed are shown and discussed.
W niniejszej publikacji przedstawiono sposób przeprowadzania badań eksperymentalnych mających na celu wyznaczanie właściwości wytrzymałościowych materiałów kompozytowych stosowanych na osłony balistyczne. W pracy omówiono próby rozciągania, twardości, zginanie i rozwarstwienia, dla których przygotowano procedury badawcze. Przedstawione i omówione wyniki badań eksperymentalnych mogą posłużyć przy projektowaniu osłon balistycznych.
Źródło:
Fibres & Textiles in Eastern Europe; 2012, 3 (92); 61-66
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computational and experimental study of the strength of a composite drive shaft
Autorzy:
Bolshikh, Aleksandr
Powiązania:
https://bibliotekanauki.pl/articles/2203842.pdf
Data publikacji:
2021
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
composite material
drive shaft
filament winding
racing car
materiał kompozytowy
wał napędowy
metoda nawijania
samochód wyścigowy
Opis:
This computational and experimental work is dedicated to the development of promising designs of vehicle drive shafts made of polymer composite materials. This paper analyzes the existing models of drive shafts of “Formula Student” class vehicles and substantiates the use of a carbon-fiber drive shaft with titanium tips. A manufacturing technology for such a product is also presented. Evaluation of structure performance under the action of ultimate loads was carried out by the finite element method. Prototypes of composite drive shafts were produced for further laboratory and field tests. The author proposed a new design of composite drive shafts and a method for calculating the strength of the proposed design; the results were verified by bench laboratory and field tests. From the results of this work, conclusions about the performance of the developed structures and their applicability to racing cars were drawn.
Źródło:
Transport Problems; 2021, 16, 1; 75--86
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Estimation of strength parameters of aviation products made of polymer composites based on Markov chain theory
Szacowanie parametrów wytrzymałościowych wyrobów lotniczych z kompozytów polimerowych z kompozytów polimerowych z uwzględnieniem teorii łańcuchów Markowa
Autorzy:
Chatys, R.
Stefańska, A.
Piernik, K.
Stefański, K.
Powiązania:
https://bibliotekanauki.pl/articles/212844.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
composite material
composite testing
fatigue strength
Markov's theory
kompozyt
badania kompozytów
wytrzymałość zmęczeniowa
wytrzymałość resztkowa
teoria Markowa
Opis:
The study investigates the fatigue strength of a component made of a glass composite material with polyester matrix, manufactured using a contact method (I) and by vacuum bagging (II). Modeling was carried out only for composite material II, due to significant spread of the strength of the composite material manufactured by contact lamination I, which means that such a material does not guarantee repeatability of the test results. Estimation of the composite material fatigue strength and residual strength was performed using a mathematical model based on the Markov chain theory. The model assumed that the material failure occurs at certain critical microvolume of the components operating within the plastic range. Observed relationships between the probability values and the distribution parameters for the tatic strength of the composite components, as well as the load values allow for deriving a fatigue curve equation. Obtained results are presented in the tables.
W pracy zbadano wytrzymałość zmęczeniową kompozytu szklanego o osnowie poliestrowej, wytworzonego metodą kontaktową (I) i metodą worka próżniowego (II). Modelowanie przeprowadzono tylko dla kompozytu II, ze względu na znaczny rozrzut wytrzymałości kompozytu wykonanego metodą laminowania kontaktowego I, co oznacza kompozyt ten nie daje gwarancji powtarzalności wyników badania. Do szacowania wytrzymałości zmęczeniowej i wytrzymałości resztkowej kompozytów zastosowano model matematyczny bazujący na teorii łańcuchów Markowa. W modelu założono, iż zniszczenie materiału zachodzi przy pewnej krytycznej mikroobjętości komponentów pracujących w zakresie sprężystym. Zaobserwowane związki prawdopodobieństw z parametrami rozkładu wytrzymałości statycznej komponentów kompozytów i wielkości obciążeń pozwalają otrzymać równanie krzywej zmęczeniowej. Uzyskane wyniki badań zestawiono w tabelach.
Źródło:
Prace Instytutu Lotnictwa; 2017, 2 (247); 19-30
0509-6669
2300-5408
Pojawia się w:
Prace Instytutu Lotnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyki cieplne w diagnostyce zmian starzeniowo-zmęczeniowych powłok kompozytowych
Thermal characteristics in the diagnosis of fatigue ageing characteristics of composite cylindrical shells
Autorzy:
Wróbel, G.
Szymiczek, M.
Rojek, M.
Powiązania:
https://bibliotekanauki.pl/articles/279042.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Inżynierii Materiałów Polimerowych i Barwników
Tematy:
materiał kompozytowy
materiał polimerowy
starzenie
zmęczenie
charakterystyka cieplna
powłoka cylindryczna
powłoka kompozytowa
composite material
polymeric material
ageing
fatigue
thermal characteristics
cylindrical shell
composite shell
Opis:
W pracy przedstawiono metodę termograficznej diagnostyki cylindrycznych powłok osiowo-symetrycznych wykonywanych techniką nawijania śrubowego. Badania prowadzono na rurach wykonanych z włókna szklanego i chemoutwardzalnej żywicy poliestrowej degradowanych cieplnie i zmęczeniowo. Wielkością charakteryzującą zmiany w materiale kompozytowym podczas degradacji był pomiar temperatury w funkcji czasu na powierzchni kompozytu nagrzewanego metodą impulsywnej termografii aktywnej. Rozkład mierzonych temperatur w zależności od liczby cykli zmęczeniowych pozwala na określenie stopnia utraty ciągłości materiału. Wizualizacja zmian za pomocą termogramów pozwala na identyfikację obszarów narażonych na zniszczenia.
The paper presents a method of thermography diagnostics of cylindrical coats axially - symmetric performed by the screw winding technic. The research was carried out on pipes made of fiberglass and polyester resin fatigue and thermally degraded. Values characterizing the changes in the degradation of the composite material were to measure the temperature - time on the surface of the composite being heated by the impulsive active thermography. The distribution of measured temperatures depending on the number of fatigue cycles allow to determine the degree of continuity of the material. The visualization of changes using thermal image facilitates the identification of areas exposed to destruction.
Źródło:
Przetwórstwo Tworzyw; 2014, [R.] 20, nr 1 (157), 1 (157); 110-115
1429-0472
Pojawia się w:
Przetwórstwo Tworzyw
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Process of preparing and laying carbon prepregs
Proces przygotowania i układania preimpregnatów węglowych
Autorzy:
Sokołowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/212581.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
carbon prepreg
composite material
release agents
swage
preimpregnat węglowy
element kompozytowy
środki rozdzielcze
foremniki
Opis:
This article contains information on the technological process involved in the production of a composite structure with carbon-epoxy prepregs including critical parameters of the process. The information in the publication shows respectively: 1. Using composite components for constructing the airframe, 2. ways of storing and preserving carbon prepregs on a matrix of thermosetting resins, 3. specific types of varying weave fabrics used in the prepregs, 4. way of preparing material for the process, 5. cutting tools, 6. preparing swage, 7. list of the most popular materials, their characteristics, pros and cons of their applications, 8. issues related to types of release agent, 9. parameters of selecting release agents in the process of manufacturing structures with carbon prepregs, 10. process of laying plies in a layered structure, 11. defects which result from improper material laying in swage, 12. preparing the structure for heating and technical parameters of the process.
Praca zawiera informację na temat procesu technologicznego związanego z wytwarzaniem struktury kompozytowej z użyciem preimpregnatów węglowo-epoksydowych, z uwzględnieniem parametrów krytycznych procesu. Informacje opisane w publikacji przedstawiają kolejno: 1. Wykorzystanie elementów kompozytowych do budowy płatowca; 2. Sposób magazynowania i przechowywania preimpregnatów węglowych na osnowie z termoutwardzalnych żywic; 3. Charakterystyczne rodzaje splotów tkanin wykorzystywanych w preimpregnatach; 4. Sposób przygotowania materiału do procesu; 5. Narzędzia do cięcia; 6. Przygotowanie foremników; 7. Wykaz najpopularniejszych materiałów ich właściwości, plusy i minusy zastosowania; 8. Zagadnienia związane z rodzajami środków rozdzielczych; 9. Parametry doboru środków rozdzielczych w procesie wykonania struktur z preimpregnatów węglowych; 10. Proces układania warstw w strukturę warstwową; 11. Wady które powstają w wyniku niewłaściwego układania materiału w foremniku; 12. Przygotowanie struktury do wygrzewania oraz parametry techniczne samego procesu wygrzewania.
Źródło:
Prace Instytutu Lotnictwa; 2017, 1 (246); 27-34
0509-6669
2300-5408
Pojawia się w:
Prace Instytutu Lotnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Materiały dla jednowarstwowych ogniw paliwowych
Materials for single layer fuel cells
Autorzy:
Winiarz, P.
Powiązania:
https://bibliotekanauki.pl/articles/134696.pdf
Data publikacji:
2016
Wydawca:
ADVSEO
Tematy:
fuel cell
composite material
proton conductor
lanthanum niobate
scanning electron microscopy
x-ray diffraction
Opis:
A composite material, which may be further applied as a single layer fuel cell, was synthesized using solid state synthesis method. Composite consisted of two components. The first was a nanoceramic proton conductor – calcium doped lanthanum niobate. The second one was a nanoceramic semiconductor oxide composed of lithium, nickel and zinc oxides respectively. Structural and electrical investigations were performed on the received material. Scanning electron microscope images showed that the microstructure on the surface of this material is homogeneous. Energy dispersive X-Ray diffraction confirms that the components of the investigated composite are mixed together in a volume of material allowing to current flow through the percolation threshold. Open circuit voltage was changing during measurement from 0.8V to 0.6V. Moreover, the material did not change its structural properties during the current flow, hence it could be a good candidate to the production of single layer fuel cells.
Źródło:
Technical Issues; 2016, 4; 104-109
2392-3954
Pojawia się w:
Technical Issues
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakteryzowanie defektów w kompozytach stosowanych w lekkich osłonach balistycznych metodami tomografii cieplnej
Application of Thermal Tomography Methods for Characterization of Defects in Composite Materials Used for Light Ballistic Armours
Autorzy:
Świderski, W.
Hłosta, P.
Szudrowicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/403268.pdf
Data publikacji:
2016
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
badania nieniszczące
termografia
tomografia cieplna
kompozyt
non-destructive testing
thermography
thermal tomography
composite material
Opis:
Zobrazowanie badanego materiału (obiektu) warstwa po warstwie nazywane jest tomografią. W artykule opisano dwie metody tomografii cieplnej stosowane w badaniach nieniszczących: Dynamiczną Tomografię Cieplną (DTT - Dynamic Thermal Tomography) nazwaną w artykule „klasyczną” i tomografię cieplną „bezwzorcową”. Na przykładzie lokalizacji i charakteryzacji defektów w wielowarstwowych próbkach kompozytu węglowego (CFRP), poddanych wcześniej działaniu udarów mechanicznych o różnej energii, przedstawiono ich efektywność.
Imaging the tested material (object) in layer by layer mode is called tomography. This paper describes two methods of thermal tomography used in nondestructive testing: Dynamic Thermal Tomography (DTT), in the paper called „classical”, and „no reference” thermal tomography. These methods used for location and characterization of defects in the multilayer samples of carbon composite (CFRP) subjected to mechanical impacts of different energy, have shown their effectiveness.
Źródło:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa; 2016, 7, 1 (23); 31-42
2081-5891
Pojawia się w:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Drewno i wyroby drewnopodobne we współczesnych elewacjach
Wood and wood-like product within facades of the contemporary buildings
Autorzy:
Piróg, M.
Chądzyński, A.
Powiązania:
https://bibliotekanauki.pl/articles/160480.pdf
Data publikacji:
2016
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
materiał elewacyjny
drewno
okładzina drewniana
drewno egzotyczne
materiał kompozytowy
kompozyt drewno-polimer
facade material
wood
timber cladding
exotic timber
composite material
wood polymer composite
mounting
Opis:
Artykuł opisuje współczesne elewacje drewniane na ścianach zewnętrznych, które wykonywane są w dwojaki sposób. Pierwszy z nich to okładziny tradycyjne wykonywanie z tarcicy. Drugi to okładziny elewacyjne wykonane z desek i płyt kompozytowych, produkowane z dodatkiem rozdrobnionego drewna oraz produkty okładzinowe z drewnopodobnym licem imitującym fakturę drewnianą. Okładziny drewniane montowane mogą być na ścianach o różnej konstrukcji: murowanych, żelbetowych i drewnianych. Obecnie, zarówno naturalne drewno jak i kompozytowe materiały okładzinowe są stosowane z równym powodzeniem we współczesnym budownictwie.
The article describes the contemporary exterior wooden facades, which are created in two ways. First method employs conventional panels made out of sawn timber. The second method utilizes facade panels made out of boards and composite panels, manufactured with the use of shredded wood, and panels which use wood-like texture, imitating the real material. Wooden panels may be installed on a variety of walls, including walls made out of bricks, ferro-concrete or wood. Currently, both the natural wood, as well as the composite facade panels, are used widely, within the field of contemporary civil engineering.
Źródło:
Przegląd Budowlany; 2016, R. 87, nr 6, 6; 37-40
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies