Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Hall sensor" wg kryterium: Temat


Wyświetlanie 1-12 z 12
Tytuł:
On possibility of application of InSb-based high-temperature Hall sensors for ITER magnetic diagnostics
O możliwości zastosowania wysokotemperaturowych czujników Halla opartych o InSb w diagnostyce magnetycznej tokamaka ITER
Autorzy:
Jankowski, J.
El-Ahmar, S.
Oszwaldowski, M.
Prokopowicz, R.
Pytel, K.
Powiązania:
https://bibliotekanauki.pl/articles/159884.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Elektrotechniki
Tematy:
high-temperature
neutron irradiation
Hall sensor
ITER
magnetic diagnostics
Opis:
We report on irradiation experiments of InSb-based Hall samples at two types of neutron spectrums. One with thermal neutrons (natural neutron spectrum of fission reactor) and second with fast neutrons (filtered spectrum). Fluences in both cases reached almost 1018 cm-2 and that led to significant decreasing of electron mobility of samples. In case of thermal neutrons, transmutation process led to increasing of electron concentration of about 2.3×1018 cm-3. For samples irradiated with fast neutrons, twofold effect was observed: increase in electron concentration for samples with low carrier density and decrease in electron concentration for samples with high carrier density. All results raise important issue, that in case of ITER ex-vessel steady state sensors, research at different spectrum of neutrons are necessary.
W artykule przedstawione zostały wyniki badań nad napromieniowaniem neutronami struktur halotronowych bazujących na antymonku indu (InSb). Część próbek została napromieniowana w strumieniu neutronów termicznych (widmo naturalne neutronów reaktora MARIA w Świerku), a pozostałe próbki w strumieniu neutronów prędkich (widmo filtrowane neutronów reaktora). W obu przypadkach dozy neutronów były zbliżone do poziomu 1018 cm-2, doprowadzając do znacznego spadku ruchliwości elektronów w cienkich warstwach InSb. W przypadku napromieniowania neutronami termicznymi zaobserwowano wzrost koncentracji elektronów o wartość ok. 2,3×1018 cm-3, głównie za sprawą transmutacji In -> Sn. Dla próbek napromieniowanych neutronami prędkimi wystąpiły dwa przeciwne efekty: wzrost koncentracji elektronów dla próbek o niskiej początkowej koncentracji elektronów, oraz spadek koncentracji dla próbek o wysokiej początkowej koncentracji elektronów. Wyniki badań wskazują, że w przypadku zastosowania czujników Halla w tokamaku ITER niezbędne jest przeprowadzenie badań w strumieniach neutronów o różnym widmie energetycznym.
Źródło:
Prace Instytutu Elektrotechniki; 2012, 258; 149-156
0032-6216
Pojawia się w:
Prace Instytutu Elektrotechniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Offset Drift Dependence of Hall Cells with their Designed Geometry
Autorzy:
Paun, M. A.
Sallese, J. M.
Kayal, M.
Powiązania:
https://bibliotekanauki.pl/articles/226531.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
hall effect sensor
individual and residual offset drift
temperature coefficient
Opis:
In this paper, the performance of CMOS Hall Effect Sensors with four different geometries has been experimentally studied. Using a characteristic measurement system, the cells residual offset and its temperature behavior were determined. The offset, offset drift and sensitivity are quantities that were computed to determine the sensors performance. The temperature coefficient of specific parameters such as individual, residua offset and resistance has been also investigated. Therefore the optimum cell to fit the best in the performance specifications was identified. The variety of tested shapes ensures a good analysis on how the sensors performance changes with geometry.
Źródło:
International Journal of Electronics and Telecommunications; 2013, 59, 2; 169-175
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Integracja precyzyjnych dylatometrów hallotronowych oraz tachimetrów zrobotyzowanych dla ciągłego monitorowania przemieszczeń budowli
Integration of precise Hall-effect dilatometers and robotized total stations for continuous monitoring of displacements of buildings
Autorzy:
Mirek, G.
Lenda, G.
Powiązania:
https://bibliotekanauki.pl/articles/156441.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
hallotron
czujnik
dylatometr
tachimetr zrobotyzowany
hall effect sensor
sensor
dilatometer
robotised total station
Opis:
Opracowanie przedstawia propozycję systemu pomiarowego służącego do ciągłego monitorowania przemieszczeń obiektów budowlanych. W jego skład wchodzi zespół dylatometrów hallotronowych wykonujących pomiary względne, sterujących równocześnie pracą tachimetrów zrobotyzowanych wykonujących automatyczne obserwacje do ustalonych na obiekcie punktów. Realizowana jest w ten sposób synchronizacja czasowa pomiarów względnych oraz bezwzględnych. Pomiary tachimetryczne wykonywane są w momencie zarejestrowania przemieszczeń względnych o określonej wartości. Wyniki tych obserwacji w połączeniu z danymi z dylatometrów pozwalają zinwentaryzować stan obiektu w chwili zmian zaistniałych w jego strukturze. W opracowaniu opisano budowę oraz metodę kalibracji dylatometrów hallotronowych, jak również sposób konwersji sygnałów na postać cyfrową, umożliwiającą rejestrację pomiarów i sterowanie pracą tachimetrów. Zaprezentowano również wyniki testów dokładnościowych dla wykonanych dylatometrów.
The idea of the proposed measuring system is to synchronise robotised tacheometric measurements of an object with the existing relative displacements detected by a dilatometer. The system consists of a set of dilatometers, a robotised total station featuring ATR (automatic target recognition) and a dedicated software (Fig. 1). The software and a dilatometer were specially designed and built for the proposed system. The latter one uses Hall-effect sensors and magnets to detect and measure displacements (Fig. 5). Their output voltage is converted into digital signals and transmitted to a computer in which the displacement value is calculated by the software on the basis of the displacement-to-voltage characteristics (Fig. 7). They are precisely determined for each dilatometer during the calibration process, with help of splines, which is essential to ensure the high accuracy of measurements. The prototype of a dilatometer and its principle of operation are described in Subsections 2.1 and 2.2, while the calibration process is presented in Subsection 2.3. The dilatometers were subjected to laboratory tests to trial their operation and determine their accuracy. The results are given in Subsection 2.5. The dilatometers, apart from measuring the relative displacements, are also responsible for triggering the tacheometric measurement of object control points in ATR mode. Such a measurement is started up after exceeding the preset threshold values of displacement (Subsection 2.6). In this way the time synchronization of the relative and absolute measurements is achieved, allowing better assessment of the object deformation than in the case of measurements taken independently.
Źródło:
Pomiary Automatyka Kontrola; 2011, R. 57, nr 1, 1; 77-81
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Device for Measuring the Rotational Speed of a Chain Sprocket of a Petrol Chainsaw
Autorzy:
Wróbel, Mateusz
Jakubek, Bartosz
Rukat, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/2123289.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
magnetic field
chainsaw
rotational speed measurement
chain sprocket
hall effect sensor
Opis:
The procedure for determining the frequency-weighted RMS values of vibration accelerations in the case of petrol chainsaws proposes equal time shares of three operation modes of the chainsaw. In order to assess the actual operator’s vibration exposure, it is necessary to precisely determine the above-mentioned shares. In real-life conditions operation of chainsaws is characterized by frequent and significant rotational speed changes depending on the operation mode. Therefore, a prototype of dedicated device for measuring the rotational speed of a chain sprocket was developed. The article presents development requirements, encountered problems and their solutions, the prototype itself and functional test results.
Źródło:
Advances in Science and Technology. Research Journal; 2021, 15, 3; 99--107
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of rotor position sensor fault tolerant control in electric vehicle with PM BLDC motor drives
Autorzy:
Skóra, M.
Powiązania:
https://bibliotekanauki.pl/articles/140658.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
PM BLDC motor
Hall effect sensor
fault tolerant drive
ZOA
electric vehicle
Opis:
In order to develop a PM BLDC motor control system, which will be tolerant of selected faults, simulation work was first performed and then verified on a universal test stand. The results were published in earlier works. The next stage of works was the implementation of previously developed algorithms on the target research test stand – in this case, the prototype vehicle. This last stage of the laboratory work has been presented in this article, i.e. it has been presented the results of experimental research related to the reproduction of rotor angle position, used after the detection of a rotor position sensor fault. A new test stand with the laboratory prototype of a vehicle with two PM BLDC motors is presented. A zeroth-order algorithm (ZOA) was used as a fault compensation method. The effectiveness and usefulness of the previously proposed methods have been confirmed.
Źródło:
Archives of Electrical Engineering; 2018, 67, 4; 725-738
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hallotron sensor system for control of robotized total station operations to monitor movements of building structures
Hallotronowy system czujników sterujących pracą tachimetrów zrobotyzowanych do monitorowania przemieszczeń budowli
Autorzy:
Mirek, G.
Lenda, G.
Kocierz, R.
Powiązania:
https://bibliotekanauki.pl/articles/385528.pdf
Data publikacji:
2010
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
hallotron
czujnik przemieszczeń
tachimetr zrobotyzowany
hall effect sensor
displacement sensor
robotized total station
measuring system
Opis:
The paper presents a measuring system designed to monitor displacements and deformation of engineering structures. The main concept of the system is a control of ATR type robotized total station operation by specially designed sensors operating on the base of Hall effect and denoting the displacements occurring within the tested object in real time. This allows to quickly detect existing deformations and taking appropriate countermeasures, what is particularly important, e.g. at structure test loading. A specific electronic module of hallotron sensors was designed and built to be utilized within the system. A suitable system control software was also prepared, in order to facilitate the communication of sensors with a computer.
Praca prezentuje system pomiarowy przeznaczony do monitorowania przemieszczeń i odkształceń obiektów inżynierskich. Istotą systemu jest sterowanie pracą zrobotyzowanych tachimetrów typu ATR za pomocą specjalnie zaprojektowanych czujników, których działanie opiera się na zjawisku Halla, rejestrujących zachodzące przemieszczenia na badanym obiekcie w czasie rzeczywistym. Pozwala to na szybkie wykrycie powstających deformacji i przedsięwzięcie środków zaradczych, co może mieć szczególne znaczenie np. przy próbnych obciążeniach. Na potrzeby systemu został zaprojektowany oraz skonstruowany specjalny elektroniczny moduł czujników hallotronowych. Przygotowano również odpowiednie oprogramowanie sterujące systemu, umożliwiające komunikację czujników z komputerem.
Źródło:
Geomatics and Environmental Engineering; 2010, 4, 2; 89-99
1898-1135
Pojawia się w:
Geomatics and Environmental Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda kontroli położenia tłoka w siłowniku profilowym z wykorzystaniem sensora Halla
A control method of piston position in profiling pneumatic cylinder using Hall effect sensor
Autorzy:
Czajka, P.
Powiązania:
https://bibliotekanauki.pl/articles/256158.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
sensor Halla
czujnik kontroli położenia tłoka
siłownik pneumatyczny
indukcja pola magnetycznego
hall effect sensor
proximity sensor
pneumatic cylinder
magnetic induction
Opis:
W artykule zaprezentowano bezdotykową metodę wykrywania położenia tłoka przy wykorzystaniu czujnika półprzewodnikowego z sensorem Halla. Opisano zasadę działania i sposób doboru czujnika w celu zapewnienia prawidłowej współpracy z siłownikami pneumatycznymi. W tym celu wyznaczono rzeczywiste charakterystyki rozkładu indukcji pola magnetycznego w kanałkach siłowników profilowych. Na tej podstawie przeprowadzono badania symulacyjne oraz weryfikację poprawności działania czujnika z siłownikami. Przedstawiona wiedza została wykorzystana podczas opracowania półprzewodnikowych czujników kontroli położenia tłoka.
The article presents a non-contact method of piston position detection using a semiconductor Hall effect sensor. The text describes the principle of operation and the selection method for the sensor to assure correct cooperation with pneumatic cylinders. To achieve this target, the real characteristic of magnetic field induction distribution was measured in canals of pneumatic cylinders. Based on this, research was conducted through the simulation and verification of sensor work with pneumatic cylinders. Gained knowledge was used to produce semiconductor sensors for piston position control.
Źródło:
Problemy Eksploatacji; 2008, 1; 43-54
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przetworniki pola magnetycznego nowej generacji w zabezpieczeniach ziemnozwarciowych kopalnianych linii energetycznych
New generation magnetic field transducers in earth-fault protection systems of mining power energy lines
Autorzy:
Brodziński, G.
Lisowiec, A.
Dzierżanowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/186053.pdf
Data publikacji:
2009
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technik Innowacyjnych EMAG
Tematy:
cewka Rogowskiego
przetwornik halotronowy
przetwornik pola magnetycznego
hall effect sensor
magnetic field transducers
Rogovski coil
Opis:
Przedstawiono wyniki badań przetworników pola magnetycznego (w postaci cewek Rogowskiego) oraz przetworników hallotronowych w układach zabezpieczeń ziemnozwarciowych.
The results of tests of the magnetic field transducers (in a form of Rogovski coils) and Hall Effect sensors used in earth-fault protection systems have been presented in the paper.
Źródło:
Mechanizacja i Automatyzacja Górnictwa; 2009, R. 47, nr 7, 7; 3-7
0208-7448
Pojawia się w:
Mechanizacja i Automatyzacja Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda pomiaru przemieszczenia tłoka z wykorzystaniem sensorów Halla
Measure method of piston position in profiling pneumatic cylinder using Hall effect sensor
Autorzy:
Czajka, P.
Mężyk, J.
Powiązania:
https://bibliotekanauki.pl/articles/258129.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
sensor Halla
siłownik pneumatyczny
pomiar pozycji
tłok
indukcja pola magnetycznego
hall effect sensor
pneumatic cylinder
piston position measurement
magnetic induction
Opis:
W artykule przedstawiono metodę bezdotykowego pomiaru położenia tłoka siłownika pneumatycznego. Zaprezentowane rozwiązanie bazuje na wykorzystaniu linijki analogowych sensorów Halla do pomiaru indukcji pola magnetycznego w kanałku siłownika. Algorytm zaimplementowany w pamięci mikrokontrolera wyznacza położenie tłoka, poprzez porównanie aktualnych sygnałów sensorów z wartościami zapisanymi jako wzorzec. Przedstawiona metoda została wykorzystana przy opracowaniu typoszeregu przetworników do bezkontaktowych pomiarów położenia tłoka siłownika. Zaprezentowano budowę przetwornika oraz wyjaśniono zasadę działania algorytmu obliczającego pozycję tłoka. Opisano sposób montażu sensorów pola magnetycznego w kanałku siłownika oraz dobór rastra rozmieszczenia sensorów Halla na linijce pomiarowej.
The article presents a contactless method for pneumatic piston position measurement. The presented solution is based on a set of analogue Hall sensors measuring magnetic induction in a T-slot in the cylinder chassis. The algorithm embedded in a microcontroller calculates the position of the piston by matching of measured readouts to a pattern. The presented method was used to design a series of sensors for contactless measurement of piston position in pneumatic cylinders. The article describes the construction of the position sensor and explains the operation method of the calculation algorithm. It includes considerations concerning the method of installation of magnetic field sensors in a T-slot. The choice of spacing of Hall sensors on the line of measurement is also described.
Źródło:
Problemy Eksploatacji; 2008, 4; 53-64
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hall effect sensors performance investigation using three-dimensional simulations
Autorzy:
Paun, M.-A.
Sallese, J.-M.
Kayal, M.
Powiązania:
https://bibliotekanauki.pl/articles/398136.pdf
Data publikacji:
2011
Wydawca:
Politechnika Łódzka. Wydział Mikroelektroniki i Informatyki
Tematy:
hallotron
wygładzanie numeryczne
symulacja fizyczna
symulacja 3D
hall effect sensor
numerical offset
numerical drift
3D physical simulations
Opis:
Several Hall effect sensors were modeled and evaluated regarding the Hall voltage and sensitivity using 3D physical simulations. For accurate results the numerical offset and its temperature drift were analyzed. The versatility of the simulation allows various Hall sensor implementations. The simulation procedure could guide the designer in choosing the Hall cell optimum fabrication process, shape and dimensions in terms of the performances envisaged to be achieved.
Źródło:
International Journal of Microelectronics and Computer Science; 2011, 2, 4; 140-145
2080-8755
2353-9607
Pojawia się w:
International Journal of Microelectronics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected Current Sensing Circuits for Motor Control Application
Wybrane metody pomiaru prądu w aplikacjach silników elektrycznych
Autorzy:
Słowik, W.
Piątek, P.
Dziwiński, T.
Baranowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/274787.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
current sensing
low side
high side
current sense amplifier
instrumentation amplifier
hall effect sensor
pomiar prądu
wzmacniacz pomiarowy
wzmacniacz instrumentalny
czujnik Halla
silnik bezszczotkowy
Opis:
Precise current measurements are essential part of modern motor control algorithms. They are also required in switch mode power converters, safety circuits, current sources, supervisor systems and many other applications. In order to select the right method, it is often required from the designer to have wide knowledge of the appropriate integrated circuit, its parameters and applications. Still increasing requirements for the speed and precision of designing solutions, decreasing voltage levels, power consumption and aspects of EMC compatibility impose often contrary initial conditions.
Precyzyjne pomiary prądu są zasadniczą częścią nowoczesnych algorytmów sterowania silnikami. Są także stosowane w przetwornicach mocy, obwodach bezpieczeństwa, źródłach prądowych, systemach nadzoru i wielu innych aplikacjach. W celu wybrania właściwej metody projektant musi mieć szeroką wiedzę na temat odpowiedniego obwodu scalonego, jego parametrów i aplikacji. Rosnące wymagania dotyczące szybkości i precyzji projektowanych rozwiązań, obniżenie poziomów napięć, zużycie energii oraz aspekty kompatybilności elektromagnetycznej powodują często sprzeczne warunki początkowe.
Źródło:
Pomiary Automatyka Robotyka; 2017, 21, 1; 5-12
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design and analysis of MOS based Magnetic Field Sensor
Autorzy:
Kumar, Rakesh
Powiązania:
https://bibliotekanauki.pl/articles/1075557.pdf
Data publikacji:
2019
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
CMOS Technology
Hall Effect
Lorentz force
MagFET device
Magnetic sensor
Opis:
Magnetic sensors are widely used in various applications such as consumer electronic products (mobile phones, laptops), biomedical applications (brain function mapping), navigation, vehicle detection, mineral prospecting, non-contact switching (keyboard), contactless temperature measurement, wireless sensor network etc. Sensitivity of MagFET devices towards magnetic field, depends on the shape, dimensions VGS, VDS. In this paper we have measured effect of Physical design of gate on sensitivity of MagFET.
Źródło:
World Scientific News; 2019, 121; 42-47
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-12 z 12

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies