Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "GC-MS" wg kryterium: Temat


Tytuł:
Determination of N-nitrosodiethanolamine in trolamine by GC-FID method
Autorzy:
Rykowska, I.
Wasiak, W.
Powiązania:
https://bibliotekanauki.pl/articles/347009.pdf
Data publikacji:
2010
Wydawca:
Politechnika Bydgoska im. Jana i Jędrzeja Śniadeckich. Wydział Technologii i Inżynierii Chemicznej
Tematy:
N-nitrosodiethanolamine
GC-FID
GC-MS
Opis:
This study investigated the possibility of determination of N-nitrosodiethanolamine in triethanolamine by GC-FID methods. Triethanolamine is a component of many pharmaceuticals, including Lamiderm and Ketoprofen. According to the 5th European Pharmacopoeia, the maximum permissible concentration of N-nitrosodiethanolamine is 25 ppb. N-nitrosodiethanolamine is characterized by high volatility and low concentration in real samples. Thus, vacuum distillation was applied for the preconcentration of an analyte. Chromatographic separation was performed using a J&W Scientific DB-WAX (30 m x 0.251 mm; DF = 0.25 µm) capillary column. The method was linear from 8 ppb to 1 ppm (R2 = 0.9995). According to the definition of the International Union of Pure Applied Chemistry (IUPAC), the detection limit (S/N = 3) of the present method for N-nitrosodiethanolamine is 7 ppm. The proposed GC-FID method is an efficient method for the separation and quantitative determination of N-nitrosodiethanolamine.
Źródło:
Ars Separatoria Acta; 2009-2010, 7; 77-83
1731-6340
Pojawia się w:
Ars Separatoria Acta
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Homocysteine level in urine of autistic and healthy children
Autorzy:
Kałużna-Czaplińska, Joanna
Michalska, Monika
Rynkowski, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/1039943.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
GC/MS
urine
autism
homocysteine
Opis:
Homocysteine is an amino acid which plays several important roles in human physiology and is an important biomarker for possible deficiencies of various vitamins (vitamin B6 and B12, folic acid). In this work GC-MS method was used to determine the levels of homocysteine in the urine of autistic and healthy children. The levels of homocysteine in urine samples from 34 autistic and 21 healthy children were 2.36 ± 1.24 and 0.76 ± 0.31 (mmol∙mol-1 creatinine), respectively. The higher level of homocysteine in autistic children may indicate deficiencies of folic acid and vitamins B6 and B12 in nutrition of these children. The results of this work were taken into consideration in the nutrition of autistic children treated in the Navicula Centre of Diagnosis and Therapy of Autism in Łódź (Poland).
Źródło:
Acta Biochimica Polonica; 2011, 58, 1; 31-34
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie analizy związków lotnych techniką HS-SPME-GC/MS w badaniach autentyczności wybranych produktów spożywczych
Appliance of volatile analysis technique HS-SPME-GC/MS in the studies of authenticity of chosen food products
Autorzy:
Bryła, M.
Berezińska, A.
Obiedzińska, A.
Obiedziński, M.
Powiązania:
https://bibliotekanauki.pl/articles/270712.pdf
Data publikacji:
2010
Wydawca:
Centralny Ośrodek Badawczo-Rozwojowy Aparatury Badawczej i Dydaktycznej, COBRABiD
Tematy:
produkty spożywcze
technika HS-SPME-GC/MS
food products
HS-SPME-GC/MS technique
Opis:
Na podstawie badań własnych wykonanych w ostatnich latach dokonano przeglądu możliwości wykorzystania techniki analizy fazy nadpowierzchniowej (head-space) za pomocą mikroekstrakcji do fazy stałej (SPME - solid phase microextraction) i analizy na drodze chromatografii gazowej sprzężonej ze spektrometrią mas. Obiektami badań były kawy Arabica i Robusta, sery pleśniowe, bio-oleje roślinne oraz sery pleśniowe. Celem pracy była ocena przydatności wybranych wyróżników składu chemicznego ziarna kawowego do rozróżniania kaw różnych gatunków i o różnym pochodzeniu geograficznym oraz serów pleśniowych. W zależności od obiektów, badania związków lotnych uzupełniano badaniami innych związków występujących w matrycy żywnościowej m.in.: steroli, składu kwasów tłuszczowych. Uzyskane wyniki poddane zostały statystycznej analizie składowych głównych (PCA). W oparciu o analizę związków lotnych uzyskano dość wyraźne grupowanie pod względem pochodzenia geograficznego. Wskazano również na możliwości wykorzystania techniki HS-SPME-GCMS jako specyficznego i skutecznego e- Nosa dla celów autentyczności i identyfikowalności produktów spożywczych. Dotychczasowe rezultaty badań wskazują na dalsze, różnorodne możliwości zastosowania sprzężonych technik analitycznych w analizie jakości i bezpieczeństwa żywności.
Our work carried out in recent years was scoped to investigate the possible use of solid-phase head space micro extraction techniques coupled to gas chromatography - mass spectrometry to the food analysis. The aim of this study was to evaluate the usefulness of the product chemical composition as a factor allowing to distinguish different species of coffee and blue cheeses and differentiate its geographical origin. Arabica and Robusta coffee, blue cheese and various bio-oils samples were taken into investigation. Composition of the volatile headspace fraction was determined. Additional chemical analysis including determination of the fatty acid composition and sterol contents was also performed. Obtained results were statistically analyzed applying principal component analysis (PCA). Results of this study revealed that determination of the volatile fraction composition was sufficient to differentiate the sample geographical origin, and the fairly clear grouping was obtained. The possibility of HS-SPME technique GC-MS as a specific and effective e-nose for authenticity and traceability of food products was also indicated. Results of this and previous research indicate various further possibilities of the combined analytical techniques application in the area of food quality and food safety.
Źródło:
Aparatura Badawcza i Dydaktyczna; 2010, 15, 4; 97-108
2392-1765
Pojawia się w:
Aparatura Badawcza i Dydaktyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of quantitative and qualitative extractive components extracted from hornbeam (Carpinus betulus L.) and yakal (Shorea astylosa Foxw.) wood
Autorzy:
Sierant, Dominik
Szadkowska, Dominka
Powiązania:
https://bibliotekanauki.pl/articles/2171743.pdf
Data publikacji:
2022
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
wood extractives
GC-MS
yakal
hornbeam
Opis:
The aim of the study was analysis of quantitative and qualitative extractive components extracted from hornbeam (Carpinus betulus L.) and yakal (Shorea astylosa Foxw.) wood. Two wood species similar to each other in terms of microscopic structure and physical properties, the native wood of Hornbeam (Carpinus betulus L.) and the yakal wood (Shorea astylosa Foxw.) endemic to the Philippines, which is still little understood, were investigated. Wood is a material composed mainly of polymers called lignocellulose which includes: (cellulose, lignin and hemicelluloses), but also contains many extractive and mineral substances. . The extractive content of wood in temperate climates is approximately for up to 5% by weight of wood. Their identification is difficult because of the wide variety and multiplicity of compounds present. However, extractive compounds are important for the resistance of trees and wood to biological agents such as fungal infestation or insect infestation. Usually the zones of dead wood (heartwood or cored wood) are characterized by a higher content of extractives. The understanding of the chemical composition of extractives in wood can contribute to the development of wood preservative products and environmentally friendly and would be part of the green chemistry policy.
Celem pracy była analiza ilościowa i jakościowa składników ekstrakcyjnych wyekstrahowanych z drewna grabu (Carpinus betulus L.) i drewna jakalu (Shorea astylosa Foxw.). Badaniom poddano dwa podobne do siebie pod względem budowy mikroskopowej i właściwości fizycznych gatunki drewna, rodzime drewno grabu (Carpinus betulus L.) oraz drewno endemicznego gatunku występującego na Filipinach yakalu (Shorea astylosa Foxw.), który jest wciąż mało poznany. Drewno jest materiałem składającym się głównie z polimerów zwanych lignocelulozą, w skład których wchodzą: (celuloza, lignina i hemicelulozy), ale zawiera również wiele substancji ekstrakcyjnych i mineralnych. . Zawartość ekstraktów w drewnie w klimacie umiarkowanym wynosi około do 5% suchej masy drewna. Ich identyfikacja jest trudna ze względu na dużą różnorodność i mnogość występujących związków. Związki ekstrakcyjne są jednak ważne dla odporności drzew i drewna na czynniki biologiczne, takie jak infekcje grzybów lub owadów. Zazwyczaj strefy martwego drewna (twardziel lub drewno rdzeniowe) charakteryzują się większą zawartością ekstraktów. Poznanie składu chemicznego substancji ekstrakcyjnych w drewnie może przyczynić się do opracowania produktów do konserwacji drewna, które byłyby przyjazne dla środowiska i wpisywałyby się w politykę zielonej chemii.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology; 2022, 117; 63--73
1898-5912
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of Methods For Ethylhexyl 4-Methoxycinnamate Acid Ester Oxidation In Water Medium
Autorzy:
Studziński, W.
Gackowska, A.
Powiązania:
https://bibliotekanauki.pl/articles/124606.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
EHMC
oxidation
by-products
GC-MS
Opis:
The aim of the studies was to compare an impact of oxidizing agents on degradation of ethylhexyl 4-methoxycinnamate acid (EHMC). The oxidation reaction was carried out in the presence of sodium hypochlorite, hydrogen peroxide and ozone with/without UV radiation. EHMC degradation and the analysis of products were performed using gas chromatograph coupled with a mass spectrometry detector. The most effective method of EHMC degradation turned out to be ozonation with participation of UV radiation. In this system, degradation proceeded most quickly and generated a small amount of by-products (2-propyl-1-pentanol; 4-metoxybenzaldehyde and Z-EHMC). Under the influence of sodium hypochlorite, numerous chloroorganic products were formed, which can cause secondary contamination of water. Application of appropriate oxidation processes can contribute to degradation of micropollutants and thus to improvement of water quality.
Źródło:
Journal of Ecological Engineering; 2017, 18, 4; 204-210
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The chromatographic analysis of extracts from poplar (Populus sp.) - Laying program GC-MS
Autorzy:
Szadkowska, Dominika
Szadkowski, Jan
Powiązania:
https://bibliotekanauki.pl/articles/2200140.pdf
Data publikacji:
2020
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
GC-MS
poplar wood
extractives
biofuels
Opis:
The chromatographic analysis of extracts from poplar (Populus sp.) - Laying program GC-MS. The aim of the study was to develop the method of analysis by gas chromatography of the liquid obtained after extraction with cyclohexane of wood of different poplar varieties (Populus sp.). After applying an appropriate method, the application of gas chromatography with mass detector facilitates the analysis of the chemical composition of extracts from different types of lignocellulosic biomass. It is also possible to verify included compounds as well as to compare the content of individual compounds contained in the analysed sample. Moreover, this sample will make it possible to determine the significance of the influence of given substances on biofuel production processes based on lignocellulosic materials. One of the key chemical substances influencing the process of enzymatic hydrolysis and fermentation are extraction substances contained in lignocellulose materials used in 2nd and 3rd generation biofuels. These compounds can inhibit the whole process of producing biofuels from lignocellulosic biomass.
Analiza chromatograficzna ekstraktów z drewna topoli (Populus sp.)- układanie programu GC-MS. Celem pracy było opracowanie metodyki przeprowadzania analizy przy pomocy chromatografii gazowej cieczy pozyskanej po ekstrakcji za pomocą cykloheksanu drewna różnych odmian topoli (Populus sp.). Zastosowanie chromatografii gazowej z detektorem mas (GC-MS) umożliwia po zastosowaniu odpowiedniej metody na analizę składu chemicznego ekstraktów z różnych rodzajów biomasy lignocelulozowej oraz weryfikacje związków w niej występującej, a także porównanie zawartości poszczególnych związków w analizowanej próbce, co umożliwi określenie istotności wpływu danych substancji na procesy wytwarzania biopaliw w oparciu o materiały lignocelulozowe. Jednymi z kluczowych substancji chemicznych wpływających na proces hydrolizy enzymatycznej oraz fermentacji są substancje ekstrakcyjne zawarte w materiałach lignocelulozowych wykorzystywanych w biopaliwach 2 i 3 generacji. Związki te mogą inhibitować cały proces wytwarzania biopaliw z biomasy lignocelulozowej.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology; 2020, 111; 32--36
1898-5912
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie emisji formaldehydu z wyrobów budowlanych metoda komorową z zastosowaniem techniki GC-MS-PT
Determination of formaldehyde emissions from construction products using chamber method and GC-MS-PT
Autorzy:
Nowacka, M D
Kaniowska-Klarzyńska, E.
Powiązania:
https://bibliotekanauki.pl/articles/1819416.pdf
Data publikacji:
2012
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
materiały budowlane
formaldehyd
technika GC-MS-PT
Opis:
Increased public awareness and concern for indoor air pollution health consequences for the internal environment, demand for building materials and items of equipment with low emission of organic compounds. Formaldehyde has been classified as toxic and carcinogenic category 1. Formaldehyde can cause allergies, conjunctivitis, cough, headache, and may cause irreversible changes in the risk of a health condition. In world there is still a lot of information on the toxicity of formaldehyde on the human body. The aim of the study was to evaluate the emission of formaldehyde and other compounds with a new analytical method with the identification. We demonstrated that GC-MS technique in combination with Purge & Trap (P&T) can be useful in the analysis of volatile organic compounds in building products containing synthetic resins. Described method applies techniques to enable the determination of formaldehyde is based on air samples in laboratory chambers, followed by absorption in water, concentrating in Purge & Trap device and analysis volatile organic compounds technique of gas chromatography with MS detection. The combination of GC-MS with Purge & Trap system provides 1000-fold concentration of samples prior to the chromatographic column DB-VRX (length 60 m, diameter 0,25 mm, a thickness of 1,4 microns stationary phase). Elaborated method for determination of emissions of formaldehyde GC-MS-PT is characterised by good linearity of 1-80 mu g/l repeatability is 1.2% (for the concentration of 80 mu g/l) and 7.5% (for concentrations of 1 mg/l). The uncertainty at the level of 1 mu g/l reaches 20.6%. The limit of quantification is 0.26 g/l, corresponding to emission of 1.3 mu g/m3. The method is designed to analyze the emission of formaldehyde from samples: including laminate flooring, parquet, mineral wool and wood-based materials that is made by binding with adhesives or glues one or more of the following materials: wood fibres, or stripped, or sheared wood sheets, and/or wood residues from forest, plantations, sawn-wood, residues from pulp/paper industry as well recycled wood. Wood-based materials comprise: hardboard, fibreboard, medium density fibreboard, particleboard, OSB (Oriented Strand Board), plywood, and panels in solid wood. The term 'wood-based material' also refers to composite materials made from wood-based panels coated by plastics, or laminated plastics, metals and other coating materials as well as finished/semi-finished wood-based panels. The results indicate that target compound varied in the range of 0.75 mg/m3) for the panels completely covered up to 22.5 mg/m3 for MDF. Emission of formaldehyde from samples of mineral wool was of 5.5 to 18.75 mu g/m3. Emissions of plywood veneered panels was 50.88 mg/m3. Emission of formaldehyde from mineral wool samples ranged from 5.5 to 18.75 mg/m3. In the case of MDF emissions were above 50 mg/m3 (58.4 and 54.0 mg/m3). Results of our research concerning emissions of formaldehyde from wood products confirm that such materials meet the requirements for the class of El in Europe. In materials intended for the use inside the premises with mineral wall the limit of formaldehyde concentrations was not exceeded. In construction products containing synthetic resins was confirmed by GC-MS of acetonitrile and acetone. The performed identification of hazardous chemicals showed that wood., based materials emit irritating and allergenic substances: formaldehyde, acetonitrile, acetone, carbamide, formamide, acetaldehyde, acetic acid, dimethylosilanol, butanal, 2-butanone, 3-ethylobutanal. Trace levels of aldehydes, amines, amides, nitriles and esters have been found in construction materials containing plastics resin formaldehyde.
Źródło:
Rocznik Ochrona Środowiska; 2012, Tom 14; 708-717
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simplification of the Procedure of Preparing Samples for PAHs and PCBs Determination
Uproszczenie procedury przygotowania próbek do oznaczania WWA i PCB
Autorzy:
Macherzyński, B.
Włodarczyk-Makuła, M.
Nowacka, A.
Powiązania:
https://bibliotekanauki.pl/articles/204865.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
układ GC-MS
WWA
PCB
osad ściekowy
supernatanty
PAH
PCBs
recovery
GC-MS
SPE
sewage sludge
supernatants
Opis:
W pracy przedstawiono wyniki badań wspólnego oznaczania WWA i PCB w osadach przemysłowych oraz cieczach nadosadowych. Osady pobrano z zakładowej oczyszczalni, a ciecze nadosadowe uzyskano poprzez ich odwirowanie. Przygotowane próbki osadów i cieczy poddawano ekstrakcji z wykorzystaniem mieszaniny organicznych rozpuszczalników. Stosowano cykloheksan i dichlorometan do próbek stałych, a metanol, cykloheksan i dichlorometan – do ciekłych. Ekstrakty, po oddzieleniu od próbek osadów i cieczy, oczyszczano na żelu krzemionkowym w warunkach próżniowych i zatężano w strumieniu azotu. W tak przygotowywanych ekstraktach prowadzono analizę jakościowo-ilościową 16 WWA z wykorzystaniem układu GC-MS. Następnie próbki odparowywano i zalewano wodą oraz metanolem do uzyskania klarownego roztworu. Ekstrakty oczyszczano na kolumienkach octadecylowych C18, a następnie zatężano w strumieniu azotu. W tych ekstraktach oznaczano PCB również z wykorzystaniem chromatografu gazowego ze spektrometrem mas. Zakres stężeń 16 WWA w osadach ściekowych wynosił od 10–16 mg/kgs.m.. Sumaryczne średnie stężenie 16 WWA w cieczach nadosadowych wynosiło 17 žg/L. Średni odzysk WWA wprowadzonych do osadów w postaci mieszaniny wzorcowej wynosił 78% (z uwzględnieniem naftalenu). W przypadku cieczy nadosadowych średnia wartość odzysku to 60%. Średnie stężenie PCB w cieczach nadosadowych wynosiło 10 ng/L. Dla osadów suma oznaczonych PCB wyniosła średnio 1,23 žg/kgs.m.. W przypadku poszczególnych PCB procentowy odzysk mieszaniny wzorcowej dla cieczy nadosadowych sięgał do 86%, natomiast dla osadów do 55%.
Źródło:
Archives of Environmental Protection; 2012, 38, 4; 23-33
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bursztyn bałtycki i inne żywice kopalne w świetle badań fizykochemicznych
Baltic amber and other fossil resins in the light of physicochemical studies
Autorzy:
Matuszewska, A.
Powiązania:
https://bibliotekanauki.pl/articles/2074674.pdf
Data publikacji:
2009
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
bursztyn
bursztyn bałtycki
sukcynit
kopal
fluoroscencja
żywice kopalne
spektroskopia w podczerwieni
IR
metody chromatograficzne
Py-GC-MS
amber
succinite
copal
fossil resins
fluorescence
Py-GC/MS
GC-MS
Opis:
The paper presents some problems in the studies on Baltic amber (succinite) and other fossil resins. Natural resins form a large group of fossils already known from various parts of the world. However, they markedly differ in age and origin which creates problems in their systematic nomenclature. At the beginning of this paper some definitions are presented concerning the scientific nomenclature of fossil resins as well as practical terminology. The fossil resins are the objects of interest of many scientific domains, especially as they are used for many purposes. The resins are investigated by scientists representing various natural sciences as well as archeologists and representatives of other disciplines; and in the aspect of application they are widely used in jewelry making as well as in some branches of industry (e.g. chemical and pharmaceutical). Variability of fossil resins along with complexity of their structure and composition, and broad issues of genesis and various historical aspects form a vast field of for further studies. However, the studies require the use of a multilateral approach, including instrumental analysis. The paper presents several examples of selected physicochemical methods which should be highly useful in solving questions concerning origin and composition as well as properties of fossil resins.
Źródło:
Przegląd Geologiczny; 2009, 57, 12; 1078-1078
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Seasonality study of extracts from leaves of Thuja occidentalis L.
Autorzy:
Chajduk, M.
Gołębiowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/2142057.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
extract
GC-MS
Thuja occidentalis
volatile compounds
Opis:
The market value of essential oils is steadily increasing every year. They are mainly used as aromas and preservatives in food and cosmetics industries. The content and yield of the obtained extracts change across the seasons of the year. The knowledge of these differences is important for essential oils industry to gain the best quality and quantity of products. In this study Thuja occidentalis L. (Eng. northern white cedar) extract was obtained from leaves by maceration in dichloromethane. Plant material was collected during each season of the year and the finished products were thoroughly examined through GC-MS analysis. The seasonal variations of volatile compound composition showed that the most adequate period to obtain T. occidentalis extract on an industrial scale is spring. This is due to the best efficiency (almost 10%) and the highest content of monoterpenes (67%).
Źródło:
Acta Biologica Cracoviensia. Series Botanica; 2022, 64, 1; 7-14
0001-5296
Pojawia się w:
Acta Biologica Cracoviensia. Series Botanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Chemical composition of Marrubium vulgare L. essential oil from Algeria
Autorzy:
Abadi, A.
Hassani, A.
Powiązania:
https://bibliotekanauki.pl/articles/412345.pdf
Data publikacji:
2013
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Marrubium vulgare
Lamiaceae
GC
GC-MS
alfa-pinene
Phytol
Opis:
The chemical constituants of the essential oil from aerial parts of Marrubium vulgare, collected in Algeria, were analyzed by GC and GC/MS. The oil yield of the dried plant aerial parts, obtained by hydrodistillation, was 0.04 % (w/w). 50 compounds, accounting for 82.46 % of the oil, were identified. The major constituants were: 4,8,12,16-Tetramethyl heptadecan-4-olid (16.97 %), Germacrene D-4-ol (9.61 %),?- pinéne (9.37 %) Phytol (4.87 %), Dehydro-sabina ketone (4.12 %), Piperitone (3.27 %), ? - Cadinene (3.13 %), 1-Octen-3-ol (2.35 %) and Benzaldehyde (2.31 %).
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2013, 8, 3; 210-214
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phytochemical analysis, antioxidant and anticancer activity of Aerva javanica growing in district Karak, Khyber Pakhtunkhwa Pakistan
Autorzy:
Afzal, Sajida
Khan, Siraj
Iqbal, Majid
Akhtar, Anam
Powiązania:
https://bibliotekanauki.pl/articles/2087348.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Szczeciński. Wydawnictwo Naukowe Uniwersytetu Szczecińskiego
Tematy:
phytochemistry
antioxidant potential
anticancer potential
GC-MS analysis
Aerva javanica
fitochemia
potencjał antyoksydacyjny
potencjał przeciwnowotworowy
analiza GC-MS
Opis:
The purpose of this study was to evaluate the photochemical, antioxidants and anticancer activity of the medicinal plant Aerva javanica. This plant belongs to the Amaranthaceae family. Locally it is called “bui”. It is a shrub with a long tap root that grows all over India in the wild. The plant extracts were prepared using ethanol, methanol and distilled water as solvents. The antioxidant activity was determined using DPPH (2,2-diphenyl-1-picryl-hydrazyl-hydrate) free radical scavenging activity and IC50 was determined. The total flavonoids compounds found in Aerva javanica ethanolic extract were (0.90 ±0.16) while the total phenolic contents found in ethanolic extract were (0.78 ±0.16), followed by the methanolic and aqueous extract. The antioxidant results of methanolic extract of Aerva javanica showed 0.78 ±0.18 percent inhibition and SCV 49.10% at concentration of 1.5 mg/ml, ethanolic extract showed 0.54 ±0.12 percent inhibition with 64.28% SCV. Phytochemical analysis of best result oriented Aerva javanica extract was done with Gas Chromatography-Mass Spectrometry (GC-MS) technique. The results revealed the presence of different compounds predominantly Acetone (1.18%), Ethyl Acetate (38.95%), (20.77%), n-Propyl acetate (4.09%), Isobutyl acetate (2.71%), (3.84%), isoquinoline,1-[(3,4-diethoxyphenyl)methyl]-6,7-diethoxy- (3.36%), Cyclohexanone (1.43%), 1,1-Diisobutoxy-isobutane (2.02%), n-Hexadecanoic acid (5.61%), Phytol (3.57%), 9-Octadecenoic acid, 1,2,3-propanetriyl ester (10.72%), Octadecanoic acid (1.78%), Bis(2-ethylhexyl) phthalate (3.48%), Squalene (1.40%), 2,2-Dimethyl-3-(3,7,16,20-tetramethyl (1.12%) and 1,6,10,14,18,22-Tetracosahexaen-3-ol (1.195%). The study concludes that extensive research is required to detect more novel compounds in order to develop effective management approaches that significantly reduce the impact of the pathogens on human health as well as on environment.
Celem pracy była ocena fotochemicznej, antyoksydacyjnej i przeciwnowotworowej aktywności rośliny leczniczej Aerva javanica. Ta roślina należy do rodziny Amaranthaceae. Lokalnie nazywa się „bui”. Jest to krzew o długim korzeniu palowym, który dziko rośnie w całych Indiach. Ekstrakty roślinne przygotowano przy użyciu etanolu, metanolu i wody destylowanej jako rozpuszczalników. Aktywność przeciwutleniającą oznaczono za pomocą DPPH (2,2-difenylo-1-pikrylohydrazyl-hydrat) neutralizując wolne rodniki i wyznaczając IC50. Całkowita zawartość związków flawonoidowych znaleziona w ekstrakcie etanolowym Aerva javanica wynosiła (0,90 ±0,16), podczas gdy całkowita zawartość fenoli znaleziona w ekstrakcie etanolowym wynosiła (0,78 ±0,16), a następnie w ekstrakcie metanolowym i wodnym. Wyniki antyoksydacyjne ekstraktu metanolowego z Aerva javanica wykazały 0,78 ±0,18 procent inhibicji, a SCV 49,10% przy stężeniu 1,5 mg/ml, ekstrakt etanolowy wykazał 0,54 ±0,12 procent inhibicji z 64,28% SCV. Analizę fitochemiczną ekstraktu Aerva javanica przeprowadzono techniką chromatografii gazowej ze spektrometrią mas (GC-MS). Wyniki wykazały obecność różnych związków, głównie acetonu (1,18%), octanu etylu (38,95%), (20,77%), octanu n-propylu (4,09%), octanu izobutylu (2,71%), (3,84%), izochinoliny, 1-[(3,4-dietoksyfenylo) metylo]-6,7-dietoksy- (3,36%), cykloheksanon (1,43%), 1,1-diizobutoksy-izobutan (2,02%), kwas n-heksadekanowy (5,61%), fitol (3,57%), kwas 9-oktadecenowy, ester 1,2,3-propanotriylowy (10,72%), kwas oktadekanowy (1,78%), ftalan bis(2-etyloheksylu) (3,48%), skwalen (1,40%), 2,2-dimetylo-3-3,7,16,20-tetrametyl (1,12%) i 1,6,10,14,18,22-tetrakozaheksaen-3-ol (1,195%). Potrzebne są badania mające na celu wykrycie większej liczby nowych związków w celu opracowania skutecznych metod zarządzania, które znacznie zmniejszą wpływ patogenów na zdrowie człowieka, a także na środowisko.
Źródło:
Acta Biologica; 2021, 28; 91-107
2450-8330
2353-3013
Pojawia się w:
Acta Biologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przemiany chemiczne syntetycznego środka smarnego zawierającego ekologiczny dodatek przeciwzużyciowy zachodzące w warunkach tarcia
Investigation of the chemical conversions of synthetic lubricant containing ecological antiwear additive proceeding under friction conditions
Autorzy:
Makowska, M.
Siwiec, E.
Powiązania:
https://bibliotekanauki.pl/articles/189052.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
dodatek ekologiczny
właściwości przeciwzużyciowe
oleje syntetyczne
analiza chromatograficzna GC-MS
ecological additive
antiwear properties
synthetic lubricants
GC/MS analysis
Opis:
Zbadano przemiany chemiczne, jakim ulegają podczas tarcia syntetyczne środki smarowe na bazie oleju poli-α-olefinowego i estrowego, zawierające ekologiczny dodatek przeciwzużyciowy pochodzenia roślinnego. Badania tribologiczne przeprowadzono za pomocą aparatu czterokulowego oraz testera typu kula–tarcza w warunkach różnych wymuszeń termicznych. Produkty przemian tribochemicznych skomponowanych środków smarowych identyfikowano za pomocą chromatografii gazowej, sprzężonej ze spektrometrią masową (GC/MS). Stwierdzono, że w wyniku zachodzących przemian powstają produkty mogące wpływać na efektywność przeciwzużyciową badanych środków smarowych.
Chemical conversions of PAO – and ester-based synthetic lubricants containing ecological antiwear additives of vegetable origin under different friction conditions were investigated. Rubbing tests were performed using a four-ball machine and ball-on-disk tester. Products of tribochemical reactions of the lubricants’ components have been investigated by gas chromatography coupled with mass spectrometry. It has been concluded that the chemical changes lead to the formation of a variety of compounds that influence the antiwear efficiency of the lubricants.
Źródło:
Tribologia; 2013, 2; 129-139
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Essential oil composition and antioxidant activity of Marrubium vulgare L. growing wild in Eastern Algeria
Autorzy:
Abadi, A.
Hassani, A.
Powiązania:
https://bibliotekanauki.pl/articles/412455.pdf
Data publikacji:
2013
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Marrubium vulgare
Lamiaceae
Essential oil composition
GC
GC-MS
antioxidant
Opis:
In previous work [1], the essential oil of the aerial parts of Marrubium vulgare L. obtained by hydrodistillation was analysed by gas chromatography coupled to mass spectrometry (GC-MS) in order to determine their chemical composition. Fifty (50) components in the oil of M. vulgare were identified. The results demonstrated that the major components of the essential oil were: 4,8,12,16-Tetramethyl heptadecan-4-olid (16.97 %), Germacrene D-4-ol (9.61 %), α- pinéne (9.37 %), Phytol (4.87 %), Dehydro-sabina ketone (4.12 %), Piperitone (3.27 %), δ-Cadinene (3.13 %), 1-Octen-3-ol (2.35 %) and Benzaldehyde (2.31 %). In this study, the antioxidant properties of essential oil were examined. The results showed that this oil can be considered an effective source of antioxidants of natural origin. This is the first report on chemical composition of M. vulgare essential oil cultivated in Algeria and the original study on the antioxidant activity of M. vulgare essential oil. The antioxidant activity was investigated with one method: 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging method.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2013, 9, 1; 17-24
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Floral scent compounds and emission patterns of three Styrax species
Autorzy:
Chen, C.
Cao, Y.
Chen, H.
Ni, M.
Yu, F.
Powiązania:
https://bibliotekanauki.pl/articles/2078258.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
Styrax species
volatile compounds
terpenes
SPME-GC/MS
Opis:
Styrax is a gorgeous species combined with high medicinal and ornamental values, however, in- formation about its floral scents is limited. This study aimed to reveal the floral scent compounds and the dynamic changes in the flowering process of Styrax japonicus, S. grandiflora and S. calvescens. Static headspace solid-phase microextraction coupled with gas chromatography-mass spectrometry was adopted in the pres- ent study. The results showed that 24, 22 and 22 volatile compounds were present at three flowering stages, among which linalool, ocimene, α-pinene and germacrene D dominated in different species. Terpenes were the main floral scent compounds in all species, whereas there was considerable relative content of ketones in S. japonicus. Among the major terpenes, α-pinene, ocimene and myrcene were the common volatiles in these species, while β-elemene and allo-ocimene were the specific volatiles in S. japonicus and S. calvescens, respec- tively. The highest content of terpenes occurred at initial flowering stage in three species. The differences in the type and content of principal compounds contributed to the fragrance diversity among these species. A solid foundation for understanding the complexity of volatile emission could be obtained from our findings, meanwhile, effective utilization of abundant terpenes in flowers of Styrax species should be applied.
Źródło:
Dendrobiology; 2021, 85; 30-38
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies