Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Engines" wg kryterium: Temat


Tytuł:
Improving Diesel Engine Reliability Using an Optimal Prognostic Model to Predict Diesel Engine Emissions and Performance Using Pure Diesel and Hydrogenated Vegetable Oil
Autorzy:
Žvirblis, Tadas
Hunicz, Jacek
Matijošius, Jonas
Rimkus, Alfredas
Kilikevičius, Artūras
Gęca, Michał
Powiązania:
https://bibliotekanauki.pl/articles/28328353.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
engine’s reliability
statistical regression analysis
linear regression models
ANCOVA
MAPE
hydrotreated vegetable oil
Opis:
The reliability of internal combustion engines becomes an important aspect when traditional fuels with biofuels. Therefore, the development of prognostic models becomes very important for evaluating and predicting the replacement of traditional fuels with biofuels in internal combustion engines. The models have been made to model AVL 5402 engine emission, vibration, and sound pressure parameters using a three-stage statistical regression models. The fifteen parameters might be accurately predicted by a single statistic presented here. Both fuel type (diesel fuel and HVO) and engine parameters that can be adjusted were considered, since this analysis followed the symmetry of the methods. The data analysis process included three distinct steps and symmetric statistical regression testing was performed. The algorithm examined the effectiveness of various engine settings. Finally, the optimal fixed engine parameter and the optimal statistic were used to construct an ANCOVA model. The ANCOVA model improved the accuracy of prediction for all fifteen missing parameters.
Źródło:
Eksploatacja i Niezawodność; 2023, 25, 4; art. no. 174358
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental and numerical modelling of combustion process of liquid fuels under laminar conditions
Autorzy:
Żurek, J.
Jankowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/950154.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
modelling of combustion processes
laser Doppler velocimetry
Phase Doppler
Laser Analyser
ANSYS Fluent
laminar bounduary layer
Opis:
The paper presents the results of experimental studies obtained in a special test stand, which was carried out with the addition of mass flow, summarizes the theoretical analysis of the phenomena occurring in the flow, and the calculations, which were performed using the modeling of flow in the channel. The two examples of model calculations for the two laminar Reynolds number values are shown. Paper presents: channel scheme for analyzing the flow arising as a result of adding mass, two-dimensional diagram of the computational domain with the mass addition, grid computing domain, two-component velocity field, the lines of current in the channel, the distribution of the vector field in the channel, the average velocity as a function of the distances, the speed and temperature distributions for each channel cross-sections for flow with various values of the Reynolds number. The increase in lateral velocity Vb , while maintaining constant lower speed Vd , decreases the thickness of the boundary layer, both the velocity and the thermal one, which was also referenced in experimental investigations, carried out on the special test rig, using LDV and PDPA laser techniques.
Źródło:
Journal of KONES; 2014, 21, 3; 309-316
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization of the combustion chamber strength of aluminum pistons in diesel engines using the DuralBowl technology
Autorzy:
Żurawski, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/24202436.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
diesel engines
DuralBowl
piston
combustion chamber
chamber melting
silnik Diesla
tłok
komora spalania
topnienie komory
Opis:
The article focuses on the problem of loading the combustion chamber of diesel engine pistons together with the method of its optimization using the DuralBowl technology. Along with the growing requirements of exhaust emission standards, the increasing competition in the efficiency of internal combustion engines, the load on the combustion pistons increases due to the increase in pressure and temperature of fuel combustion and the tendency to slim the structure. Numerical analyzes and analyzes of damaged pistons in diesel engines have shown that one of the places most exposed to piston damage are the combustion chambers. There is a concentration of thermomechanical stress at the edge of the combustion chamber, which may lead to the destruction of the piston and the necessity to carry out overhaul of the drive unit. One of the technologies that optimizes the strength of this zone is the DuralBowl local remelting process. This process allows for several timesimprovement in the fatigue strength of pistons in internal combustion engines. The article analyzes the thermomechanical load on the combustion chamber along with the impact of this load on the durability of pistons in diesel engines. An analysis of the DuralBowl process was also performed, aimed at eliminating the negative effects of loading the combustion chamber, extending the piston life. The analysis focused on the microstructure of the material before and after the DuralBowl process.
Źródło:
Combustion Engines; 2023, 62, 1; 91--96
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Porównanie wydajności trójwymiarowych gier z użyciem silników CryEngine i Unity
Comparison of 3D games’ efficiency with use of CRYENGINE and Unity game engines
Autorzy:
Żukowski, Hubert
Powiązania:
https://bibliotekanauki.pl/articles/98298.pdf
Data publikacji:
2019
Wydawca:
Politechnika Lubelska. Instytut Informatyki
Tematy:
unity
cryengine
silniki gier
wydajność
game engines
performance
Opis:
W artykule przedstawiono wyniki badań wydajności aplikacji utworzonych na silnikach gier wideo: Unity i CryEngine. Przeprowadzone badania skupiały się na zestawieniu dwóch aplikacji utworzonych na wskazanych silnikach. Wybrano parametry, dla których zostało wykonane porównanie, mianowicie liczbę klatek na sekundę, wykorzystanie procesora, zużycie pamięci RAM, a także czas generowania obiektów 3D przez aplikacje. Wykonane aplikacje korzystały z tych samych zasobów i zbliżonego kodu. Postawiona w artykule hipoteza – Unity jest silnikiem wydajniejszym niż CryEngine – została zweryfikowana i częściowo udowodniona: oba silniki są wydajniejsze w zależności od sposobu wykorzystania.
This article presents the results of the performance studies of applications created with use of CryEngine and Unity game engines. Presented research was mainly focused on comparison of two applications created on selected engines. Several parameters were selected for the research: frame rate, CPU usage, RAM usage and generation time of 3D objects. Created applications were built with the use of the same graphic resources and similar source code. The hypotheses set in the article – Unity game engine is more efficient than CryEngine – have been verified and partially confirmed: engines are more efficient in different environments.
Źródło:
Journal of Computer Sciences Institute; 2019, 13; 345-348
2544-0764
Pojawia się w:
Journal of Computer Sciences Institute
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostyczny system eksploatacji silników spalinowych
Diagnostic system of operation of combustion engines
Autorzy:
Żółtowski, B.
Powiązania:
https://bibliotekanauki.pl/articles/222869.pdf
Data publikacji:
2010
Wydawca:
Akademia Marynarki Wojennej. Wydział Dowodzenia i Operacji Morskich
Tematy:
diagnostyka maszyn
symptomy stanu
wartość graniczna
okresowość diagnozowania
diagnostics of engines
symptoms of the condition
limit magnitude
periodicity of diagnosing
Opis:
W pracy przedstawiono główne deskryptory diagnostycznego systemu eksploatacji maszyn. Określono miary stanu technicznego, ich wartości graniczne oraz okresowość diagnozowania. Na tym tle wyróżniono problematykę i zadania systemu eksploatacji maszyn z wykorzystaniem technik informatycznych.
The paper presents the main descriptors of a diagnostic system of operation of engines. It defines measures of technical condition, their limit magnitudes as well as periodicity of diagnosing. Against this background the issues related to and missions of the system used to operate engines are identified.
Źródło:
Zeszyty Naukowe Akademii Marynarki Wojennej; 2010, R. 51 nr 4 (183), 4 (183); 133-142
0860-889X
Pojawia się w:
Zeszyty Naukowe Akademii Marynarki Wojennej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The investigations of fume emissions of engines
Autorzy:
Żółtowski, B.
Powiązania:
https://bibliotekanauki.pl/articles/243973.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
toxic fume components
environmental protection
Opis:
The results of the investigations of the post and exploitation emissions of the harmful components of the fumes of engines from CI were introduced In the work. Obtained results were subjected to a statistical study according to new computer procedures. Qualitative and quantitative reports were established for the level and kind of emission in reference to the changes of the state of studied engines. The need for detailed analysis ofphenomena changes of state destruction of the examined engines, with a vast number of measuring data, requires the use of specialized methods of statistical concluding. The presented results were submitted to statistical analysis, where the methods OPTIMUM and AVD were used, as well as correlation and regression methods. It gave the possibility of quality and quantity comparison of results of fumes contents from stationary tests and exploitation researches. The results of this research allow a model (mathematical relations) determination of relations between smoking and the quantity of toxic fume components of a high-pressure engine. The performed tests and analyses in his work's researches indicate tothe conclusions: in the engine of self-acting ignition (CI) the emission of carbon oxide (CO), hydrocarbons (HC) and smoking are considerable, especially during start-up and engine warming; along with the decrease of environment temperature, the emission of CO, HC and smoking increase, whilst the quantity of NOx goes down, providing premises confirming the specified regulations of forming dangers on the side of engine fumes emission; the phases of start-up and warming up of the CI engine are characterized by increased fuel usage and increased emission of carbon oxide - CO, giving information and sensitising vehicle users to these harmful for the engine working conditions, the influence of environment temperature on the emission and smoking of fumes during hot start-ups is weaker than during cold start-ups.
Źródło:
Journal of KONES; 2008, 15, 2; 579-592
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of pollutant emissions test cycles for IC engines
Porównanie cykli badawczych do pomiaru emisji zanieczyszczeń z silników spalinowych
Autorzy:
Żółtowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/243136.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
silniki spalinowe
emisja zanieczyszczeń
badania silników
internal combustion engines
emission of pollutants
engine testing
Opis:
Na świecie opracowano wiele cykli badawczych używanych do wyznaczania emisji toksycznych składników spalin z układów wylotowych silników. W niniejszej pracy porównano wyniki badań emisji zanieczyszczeń z silnika stosowanego do napędu autobusu, zmierzone na stanowisku hamownianym przy zastosowaniu trzech różnych cykli badawczych symulujących nieustalone warunki pracy silnika. Użyte w badaniach cykle pomiarowe to European Transient Cycle stosowany w homologacji europejskiej, Heavy Duty Diesel Transient Cycle stosowany w USA oraz Non Road Transient Cycle, stosowany przy homologacji silników maszyn ruchomych. Cykle te porównano ze sobą dokonując ich analizy statystycznej poprzez określenie funkcji rozkładu częstości występowania momentu i prędkości obrotowej silnika. Przeprowadzono dyskusję nad otrzymanymi wynikami pomiarów emisji, wykazano różnice w średnich parametrach charakteryzujących porównywane cykle badawcze uzasadniając tym uzyskane wyniki pomiarów emisji. Praca stanowi próbę odpowiedzi na pytanie, czy jest możliwe zamienne stosowanie cykli badawczych do wyznaczania wskaźników charakteryzujących właściwości emisyjne silnika i czy w wyniku zamiany cyklu badawczego można spodziewać się otrzymania podobnych wyników ?
There are many test cycles used for measurement of pollutant emissions from exhaust systems in internal combustion engines. In the paper are compared results of pollutant emissions testing in three different test cycles simulating transient conditions of engine operating in bus. There were used following test cycles: European Transient Cycle used in European type approval testing, Heavy Duty Diesel Transient Cycle used in USA and Non Road Transient Cycle used in type approval testing for off-road engines. These cycles were compared by using statistic analysis as well as drawing of histogram for engine torque and speed. In discussion about test results are indicated differences between mean parameters specific for each cycle. These differences are the reason why emission test results for each cycle are different. Author of this paper wanted to find answer to following question: is it possible to replace with one another emission transient test cycles and can we look forward similar emission test results for different kind of cycles?
Źródło:
Journal of KONES; 2007, 14, 2; 591-598
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Emissions from engines fuelled with biofuels
Autorzy:
Żółtowski, A
Grzelak, P. L.
Powiązania:
https://bibliotekanauki.pl/articles/243203.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
biofuels
emissions
road transport
combustion engines
environmental protection
Opis:
In recent years, the interest in the use of renewable fuels in transport has increased. This is due to the European Union’s policy to reduce greenhouse gas emissions. These fuels, in addition to the effect of reducing carbon dioxide and the other greenhouse gases, may increase the emissions of other exhaust components. The article describes the problems of pollutants emissions from the engine exhaust system, related to the use of biofuels in combustion engines or their additives in conventional fuels. The influence of the chemical composition of selected biofuels on the emissions properties of vehicles and their engines will be discussed. The tests results of engines fuelled with selected biofuels, carried out by the authors of the article, will be presented. These tests will be carried out on chassis dynamometer and engine test bench, in standard research tests used in measurements of pollutants emissions like NEDC, ESC, ETC, etc. Furthermore, selected operational parameters of vehicles and engines will be compared with biofuels and conventional fuels.
Źródło:
Journal of KONES; 2018, 25, 3; 533-539
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of combustion process in dual fuel diesel engine
Autorzy:
Żółtowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/247295.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
road transport
combustion engines
air pollution
environmental protection
alternative fuels
combustion
Opis:
In this paper are presented results of dual fuel diesel engine bench testing carried out by author. The engine was fuelled parallel with two fuels. The second, additional fuel was compressed natural gas (CNG). CNG was injected into engine inlet system before inlet to engine turbocharger. There was installed a pressure transducer in one of engine cylinders and cylinder pressure was registered at the time of testing. There is discussed place and way of pressure sensor installation and impact on quality of indicating signals of the channel connecting the transducer with combustion chamber. The carried out investigations included measurement of emissions and engine indicating completed with the heat release characteristics. There was considered influence of CNG on CO, NOx, THC and NMHC emissions, especially how pollutant emissions depend on the share of methane in fuel. The effect of using natural gas as an additional fuel injected to regular CI engine on heat release rate was investigated, as well as its rate and duration. Discussed the differences between combustion of methane and diesel oil and ways of spreading flames into air-fuel mixture for these two mixed fuels The processes of combustion of diesel oil and methane are totally different. The study searches for the limits of methane content due to knocking combustion. Additive of methane to the diesel fuel is a reason of retarded heat release, decrease of engine efficiency, greater fuel consumption and changes in emissions corresponding to the lag of self-ignition
Źródło:
Journal of KONES; 2014, 21, 2; 303-309
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Knock combustion in dual fuel diesel engine
Autorzy:
Żółtowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/242833.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
road transport
IC engines
alternative fuels
combustion process in engine
Opis:
This article presents the problem of the knock combustion in a dual fuel compression engine, in which additional fuel besides diesel oil was compressed natural gas (CNG). CNG was injected into the engine intake system and mixed with air supplying the engine. In this paper described the reasons of knock combustion, which occur with more intensity with the increase of methane content in engine fuel. The phenomenon of knock combustion in the dual fuel engine is difficult to eliminate, often impossible to avoid, and it forms a barrier limiting increase of methane share in the fuel. Also, this article contains the results of engine indicating and discussion on changes in the indicating diagrams caused by knock combustion. Carried out tests included engine indicating and numerical calculation of indicator diagrams with using spectral analysis and filtering cylinder pressure signals with high-pass filters. As a result of this calculation, several parameters describing intensity of knock combustion were determined. They allow to tell taking into account only cylinder pressure analysis if there is knock combustion inside engine combustion chamber or not. Knocking is an undesirable type of combustion in the engine, leading to excessive thermal and mechanical loading of the engine parts, causing premature wear of them. For this reason, this type of combustion should be eliminated from the engine operation and researchers of combustion processes must be provided with tools to detect and determine this kind of combustion.
Źródło:
Journal of KONES; 2014, 21, 4; 547-553
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement of emission from engine used in different powertrains
Badania emisji zanieczyszczeń z silnika współpracującego z różnymi odbiornikami mocy
Autorzy:
Żółtowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/243502.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
silniki spalinowe
emisja zanieczyszczeń
badania silników
internal combustion engines
emission of pollutants
engine testing
Opis:
In the article compared emissions of pollutants measured on the same engine operating in different type approval cycles, derived from international regulations, with cycles created as a result of real engine parameter registration in different vehicles. There was tested an engine used alternatively in bus and off-road mobile machinery. It demonstrates and compares emission test results measured on the bench applying different test cycles simulating steady state and transient engine conditions. There were used following test cycles: European Transient Cycle used in European type approval testing, Heavy Duty Diesel Transient Cycle used in USA and Non Road Transient Cycle used in type approval testing for off-road engines, as well as typical steady state cycle. Though homologation tests originated as the reflection effect of real conditions of the engine performance, not less the conditions of engine performance recreated in them can differ much more from conditions met in the selected applications of engine. The article contains discussion about emission test results. The author of this paper wanted to find answer to following question: is it possible to replace with one another emission test cycles and can we expect similar emission test results for different kind of cycles as well how much emission measured in real road condition differs to the emission measured in type approval cycles?
W niniejszym artykule porównano wyniki badań emisji zanieczyszczeń silnika pracującego w wybranych cyklach homologacyjnych opisanych w różnych międzynarodowych przepisach, z cyklami opracowanymi na podstawie rejestracji rzeczywistych parametrów pracy silnika zastosowanego w wybranych odbiornikach mocy (pojazdach). Przebadano zastosowanie silnika w autobusie miejskim oraz maszynie roboczej przeznaczonej do robót ziemnych. Przedstawiono i porównano wyniki pomiarów emisji zanieczyszczeń zmierzone na stanowisku hamownianym przy zastosowaniu różnych cykli badawczych odtwarzających statyczne i dynamiczne warunki pracy silnika. Użyte w badaniach cykle pomiarowe to European Transient Cycle, stosowany w homologacji europejskiej silników pojazdów samochodowych, Heavy Duty Transient Cycle, stosowany w USA oraz Non Road Transient Cycle, stosowany w homologacji silników maszyn ruchomych, oraz cykle opracowane dla potrzeb prac badawczych. Choć testy homologacyjne powstawały jako efekt odwzorowania rzeczywistych warunków pracy silnika, tym niemniej odtwarzane w nich warunki pracy silnika mogą znacznie odbiegać od warunków spotykanych w wybranych zastosowaniach silnika. Przeprowadzono dyskusję nad otrzymanymi wynikami emisji zanieczyszczeń. Praca stanowi próbę odpowiedzi na pytanie, na ile jest możliwe zamienne stosowanie cykli badawczych do wyznaczania wskaźników charakteryzujących właściwości emisyjne silnika oraz na ile emisja rzeczywistych warunkach pracy silnika odbiega od tej wyznaczonej w czasie badań homologacyjnych?
Źródło:
Journal of KONES; 2008, 15, 3; 597-604
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Testing of an engine fuelled with rapeseed oil
Autorzy:
Żółtowski, A
Powiązania:
https://bibliotekanauki.pl/articles/241524.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
road transport
combustion engines
air pollution
environmental protection
emissions testing
Opis:
Rapeseed oil in a few applications can be used as an engine fuel. Although it has worse properties than its methyl esters, it can be considered as an alternative fuel in engines adapted to its use. The article describes some problems resulting from the use of pure rapeseed oil as a fuel for compression ignition internal combustion engines. Differences between basic physical and chemical properties between diesel oil and rapeseed oil will be discussed and their impact on the theoretical engine performance and emission of pollutants from the exhaust system, with a focus on viscosity of rapeseed oil and the impact of this parameter on the fuel injection process. The basic changes in the engine design to be able to run on the rapeseed oil are discussed. The results of author’s own tests of the engine adapted to operate on the rapeseed oil and its blends with diesel oil carried out on the engine dynamometer test bench are presented. The theoretical assumptions presented in the Introduction were tested experimentally in the dynamometric test. Combination of higher density of rapeseed oil and its smaller stoichiometric value caused by the presence of oxygen and a smaller share of hydrogen in the fuel, means that a larger mass of fuel can be injected into the charge compressed into the cylinder. Thanks to this, the engine powered by rapeseed oil and diesel oil can reach similar powers.
Źródło:
Journal of KONES; 2018, 25, 3; 527-532
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tyre pyrolysis oil as an engine fuel
Autorzy:
Żółtowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/247415.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
road transport
combustion engines
air pollution
environmental protection
alternative fuels
combustion
Opis:
Tests have been carried out to evaluate the performance, emissions and heat release characteristics of a double cylinder direct injection diesel engine fuelled with tyre pyrolysis oil and diesel oil. The combustion parameters such as heat release rate, cylinder peak pressure, maximum rate of cylinder pressure, combustion knocking were also analysed. For purposes of this work raw pyrolysis oil was derived from waste vehicle tyres through vacuum pyrolysis realized in experimental installation. Results showed that the brake thermal efficiency of the engine fuelled with pyrolysis oil increased. THC, CO and CO2 emissions were found to be higher due to high aromatic content and longer ignition delay, whereas NOx shows increasing tendency due to greater heat release rate. The cylinder peak pressure did not change. The ignition delay became greater what can be the reason of problems with combustion knocking. Pyrolysis oil has a mass fraction of individual elements similar to diesel fuel but the chemical composition of hydrocarbons included in these fuels is different. The product of pyrolysis contains too much soot, sulphur, light and heavy hydrocarbons fractions for direct using it in engine. Aromatics content gives this fuel a distinctive smell. Pyrolysis oil is toxic and dangerous in use due to the polycyclic aromatic hydrocarbons (PAH). However raw pyrolysis oil is not suitable to use it as a CI fuel and requires additional distillation before using it in diesel engines as an alternative fuel in the future.
Źródło:
Journal of KONES; 2014, 21, 1; 295-302
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane problemy pomiaru emisji cząstek stałych z silników pojazdów ciężkich
Selected problems of pm measurement from engines of heavy duty vehicles
Autorzy:
Żółtowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/107649.pdf
Data publikacji:
2018
Wydawca:
Instytut Transportu Samochodowego
Tematy:
silniki spalinowe
emisja zanieczyszczeń
pomiar emisji cząstek stałych
internal combustion engines
pollutants emission
measurement of particulate matter emission
Opis:
W artykule opisano problemy doboru właściwej regulacji układów pomiarowych do pomiaru emisji masy cząstek stałych z silników pojazdów ciężkich i maszyn niedrogowych na tle wymagań obowiązujących przepisów. W szczególności przeanalizowano sposób regulacji i możliwość adaptacji przyrządu pomiarowego AVL472 Smart Sampler do możliwości wykonywania badań zgodnie z normą Euro VI.
In the article described the problems of selecting the right regulation of measurement systems for measuring the mass particulate emissions from engines of heavy duty vehicles and non-road mobile machineries against the background of the current regulations. In particular, the method of regulation and the possibility of adapting the AVL472 Smart Sampler sampling system to the possibility of performing tests in accordance with the Euro VI standard were analyzed.
Źródło:
Transport Samochodowy; 2018, 1; 55-74
1731-2795
Pojawia się w:
Transport Samochodowy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Detailed modelling of the internal processes of an injector for common rail systems
Autorzy:
Zöldy, M.
Vass, S.
Powiązania:
https://bibliotekanauki.pl/articles/245908.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
common rail
injector
simulation
modelling
internal combustion engines
Opis:
In the last few decades exhaust emissions of road vehicles have decreased dramatically, owing to the more and more stringent emission standards issued by the legislative bodies of different countries, combined with the necessity of cleaner, better performing vehicles from society side. The introduction of Common Rail (CR) injection systems has been a great step towards achieving this target, thanks to its flexibility in fuel injection pressure, timing, and length, along variable engine load conditions. However, it is highly time and resource consuming to set up the injection system for all operating points of different engines, moreover, as the injection is a small scale, high speed process, the behaviour of the internal processes is challenging to measure. The best solution for these problems is to create a detailed model of the injector, where all the hydraulic, mechanic, and electromagnetic subsystems are represented, this way the internal working conditions can be analysed and resources can be saved. In this work, a detailed model of a first generation CR injector for commercial vehicles is presented and validated against needle lift data. The fluid dynamic and mechanic sub-systems are presented in details to thoroughly investigate the working principles of the injector internal parts. The fluid dynamic subsystem contains the chambers, holes, and throttles of the injector, while the mechanic subsystem models the motion and behaviour of the internal parts. The main features of the injector internal working conditions are described and analysed. Apart from the needle lift, these included solenoid anchor, pin and control piston lifts, the control chamber pressure and the mechanical force acting on the anchor. Five test cases were chosen on a medium duty test engine to represent a wide range of operation points from full load to idle and the simulated results were compared to the measured data. The simulated control piston movement accurately matched the measured curves in every test case.
Źródło:
Journal of KONES; 2018, 25, 2; 416-426
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies