Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Additives" wg kryterium: Temat


Tytuł:
Effect of calcium sulfoaluminate additive on linear deformation at different humidity and strength of cement mortars
Autorzy:
Abdulwahid Al-Musawi, Kadhim
Bindhu Abraham, Kottayil
Potses, Tatsiana
Leonovich, Sergey
Kalinouskaya, Natallia
Beulah, M.
Budrevich, Neli
Powiązania:
https://bibliotekanauki.pl/articles/110953.pdf
Data publikacji:
2020
Wydawca:
Centrum Rzeczoznawstwa Budowlanego Sp. z o.o.
Tematy:
shrinkage
cracks
calcium sulfoaluminate additives
expanding additives
Opis:
The effect of calcium sulfoaluminate additives (CSA) on the compression and bending strength of mortar, as well as linear deformation of prism samples at different environmental humidity was studied. Test results indicate that bending strength of mortars with CSA and the referent at the age of 28 days are practically equal. Compressive strength of mortars with CSA reduced by 20 ... 23% for all dosages of CSA. Relative linear deformations depend on the humidity of the environment. At a humidity of 100%, the relative linear deformations are positive and the expansion increases with increasing dosage of the expanding additive. When hardening in dry air at a humidity of 55%, the greatest shrinkage deformations were for mortars with CSA. We can conclude that the expanding effect of CSA is fully manifested at high humidity, i.e. under construction conditions, this means very high-quality moisture care for concrete structures.
Źródło:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych; 2020, 2; 1-9
2450-1859
2450-8721
Pojawia się w:
Inżynieria Bezpieczeństwa Obiektów Antropogenicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nadzór nad stosowaniem dodatków do żywności – bezpieczeństwo spożycia produktów przetworzonych
Supervision of the Use of Food Additives – Safe Consumption of Processed Products
Autorzy:
Kotynia, Zofia
Szewczyk, Przemysław
Powiązania:
https://bibliotekanauki.pl/articles/416869.pdf
Data publikacji:
2019-06
Wydawca:
Najwyższa Izba Kontroli
Tematy:
food additives
additives
ADI
system for monitoring the use of additives
accumulation of food additives
taking additional substances from the diet
Opis:
In Poland, about 70 percent of an average consumer’s diet is composed of industrially processed food that contains additives: preservatives, filling additives, emulsifiers, stabilisers and flavour enhancers. At present, over 330 additives are permitted to be used in food, having 27 various technological functions. The subject of NIK’s audit, which covered the whole country, was to examine the activities of the inspectorates responsible for the health and commercial quality of food products. The objective was to assess whether the system of supervision of the use of additives in food provided for the required quality of marketed food and the safety of consumers’ health. The audit covered the scope of the supervision and the effectiveness of the cooperation among the audited entities.
Źródło:
Kontrola Państwowa; 2019, 64, 3 (386); 58-64
0452-5027
Pojawia się w:
Kontrola Państwowa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Integrated microdisperse additive and concrete on its basis
Zintegrowane dodatki mikrodyspersyjne i beton na ich bazie
Autorzy:
Lukuttsova, N.
Karpikov, E.
Degtyaryov, E.
Powiązania:
https://bibliotekanauki.pl/articles/2068347.pdf
Data publikacji:
2015
Wydawca:
Politechnika Częstochowska
Tematy:
concrete
concrete additives
microdisperse additives
beton
dodatki do betonu
dodatki mikrodyspersyjne
Opis:
There has been developed an integrated microdisperse additive for the production of functional finegrained concrete on the basis of substandard silica sand. It was established that integrated microdisperse additive implies the possibility of getting products with compressive strength up to 50 MPa, at bending equal to 8.3 MPa, water absorption 1.4%, freeze-thaw resistance more than F75 with its content of 5÷10% from the cement weight.
Opracowano zintegrowane dodatki mikrodyspersyjne do produkcji efektywnego drobnoziarnistego betonu na bazie piasku kwarcowego. Ustalono, że dodatki pozwalają na uzyskanie produktu o wytrzymałości na ściskanie do 50 MPa, na zginanie 8,3 MPa, nasiąkliwości 1,4%, mrozoodporności większej niż F75.
Źródło:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo; 2015, 21 (171); 198--204
0860-7214
Pojawia się w:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technika aplikacji dodatków ułatwiających konserwację pasz w rolnictwie ekologicznym
Techniques of application of additives admitted to apply in ecological agriculture
Autorzy:
Dulcet, E.
Borowski, S.
Kaszkowiak, J.
Bujaczek, R.
Powiązania:
https://bibliotekanauki.pl/articles/2071385.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
dodatki
technika aplikacji dodatkowych
pasze
additives
application technique of additives
fodders
Opis:
W pracy przedstawiono sposoby i techniki aplikacji róýnych dodatków dopuszczonych do stosowania w rolnictwie ekologicznym. Skutecznoúă dziaůania róýnych dodatków zaleýy od równomiernoúci rozmieszczenia ich okreúlonej iloúci w masie roúlinnej przeznaczonej do konserwacji. Stwierdzono, ýe elementy aplikatorów wprowadzajŕce dodatek do paszy naleýy umieszczaă w takich miejscach maszyny zbierajŕcej, w których materiaů roúlinny jest najbardziej rozluęniony, co stwarza duýŕ powierzchnić jego styku z preparatem.
Methods and techniques dealing with different additives admitted to appty in ecological agriculture are presented in the paper. Operational effectiveness of additives depends on the distribution uniformity of their specified quantity in floral mass intended for preservation. It was confirmed that applicator units introducing additive to the fodder should be located in such places of collating machine in which floral material is the most loose what creates a large surface of its contact with preparation. Key words: additives, application technique of additives, fodders
Źródło:
Inżynieria i Aparatura Chemiczna; 2010, 5; 39-40
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie właściwości tribologicznych oleju mineralnego z dodatkami przeciwzużyciowymi i przeciwzatarciowymi
Modelling the tribological properties of mineral oil with anti-wear and anti-seizure additives
Autorzy:
Trzos, M.
Ruta, R.
Szczerek, M.
Powiązania:
https://bibliotekanauki.pl/articles/191106.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
kompozycje smarowe
modelowanie
dodatki przeciwzużyciowe
dodatki przeciwzatarciowe
lubricants
modelling
antiwear additives
anti-seizure additives
Opis:
W artykule przedstawiono wyniki badań eksperymentalnych oleju mineralnego zawierającego dodatki jednocześnie przeciwzużyciowe oraz przeciwzatarciowe. Badania zostały zaplanowane według dwóch metod: planu dla mieszanin z ograniczeniami i planu centralnego kompozycyjnego dla identyfikacji powierzchni reakcji. Uzyskane w wyniku przeprowadzonych eksperymentów dane poddano analizie pod kątem wzajemnego wpływu dodatków na zmianę zużycia elementów współpracujących tarciowo w styku smarowanym olejem mineralnym z dodatkami. Opracowano modele opisujące wartość granicznego obciążenia zużycia w zależności od zawartości dodatków. W wyniku przeprowadzonych badań i analiz wykazano, że jednoczesne stosowanie dodatków przeciwzużyciowych i przeciwzatarciowych może spowodować wzajemne zmniejszenie efektu poprawy właściwości tribologicznych. Na podstawie opracowanych modeli oszacowano udział pozytywnego i negatywnego działania dodatków w zmianie wartości granicznego obciążenia zużycia.
The article presents the results of experimental research of mineral oils with the anti-wear and anti-seizure additives. The experiments were designed in accordance with two methods, namely: the designs of experiments for mixture and the central composite and non-factorial response surface designs. The obtained results were analysed to identify the mutual influence of anti-wear and anti-seizure additives on the changes of the wear of the elements working in frictional contacts lubricated with the mineral oil. The mathematical models of the wear limiting load capacity that depended on the percentage share of additives were developed. In the research results, it was proved that simultaneous addition of both kinds of additives can cause the mutual degradation of the positive effect of additives on tribological properties. With the use of models, the positive and negative shares of additives in the changes of the wear limiting load were estimated.
Źródło:
Tribologia; 2014, 2; 155-165
0208-7774
Pojawia się w:
Tribologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of influence of using catalyst and polar additives on engine performance and exhaust emission
Autorzy:
Tkaczyk, Marcin
Skrętowicz, Maria
Krakowian, Konrad
Powiązania:
https://bibliotekanauki.pl/articles/133555.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
catalytic additives
polar additives
diesel engine
exhaust
dodatki katalityczne
dodatki polarne
silnik wysokoprężny
spaliny
Opis:
In the paper researches of influence of using catalyst and polar additives on engine performance and emission of exhaust were carried out. The tests were made on diesel engine DuraTorq-TDDi/TDCi 16v with a capacity of 1998cm3 produced by Ford company. Two additives were investigated: FMAX - catalytic additive to fuel and HDOS - polar additive to lubricating oil in different proportions. The results indicated that using tested additives has a positive effect on exhaust composition (lower concentrations of nitrogen oxides, soot and carbon monoxide) and also decreased fuel consumption.
Źródło:
Combustion Engines; 2019, 58, 2; 3-6
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of Various Additives on the Characteristics of Bubbles Originating from the Combustion of Pyrotechnic Mixtures
Autorzy:
Ouyang, D.-H.
Duan, D.-L.
Zou, Y.-X
Powiązania:
https://bibliotekanauki.pl/articles/358784.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
additives
pyrotechnic mixtures
bubble
underwater combustion
Opis:
The bubbling behaviour originating from the combustion of pyrotechnic mixtures of KClO4/Mg-50%Al alloy, and with additives such as nitrocellulose (NC) and urotropine, were studied by high speed photography. The results revealed that with the addition of the additives the combustion pressure and the gas flow rates increased in the order KClO4/Mg-50%Al/NC (3) > KClO4/Mg-50%Al/urotropine (2) > KClO4/Mg-50%Al (1). Additionally, it is confirmed that the bubbling phenomena can be classified into various stages, i.e. single bubbling, pairing and single coalescence, double coalescence and so on.
Źródło:
Central European Journal of Energetic Materials; 2014, 11, 4; 603-611
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of egg-yolk protein addition on the characteristics of model meat products
Autorzy:
Tril, U.
Salejda, A. M.
Krasnowska, G.
Powiązania:
https://bibliotekanauki.pl/articles/115865.pdf
Data publikacji:
2013
Wydawca:
Fundacja na Rzecz Młodych Naukowców
Tematy:
egg-yolk protein
meat products
functional additives
Opis:
The aim of this study was to analyze the technological, textural, colour and sensory characteristics of model meat products produced with the addition of egg-yolk protein preparation (by-products of phospholipids extraction process at supercritical conditions). Model meat products consisted of pork class I, backfat class I and additives such a NaCl, NaNO2 and sodium isoascorbate. Functional additive (egg-yolk protein preparation) was added at different level of concentration: 0% (C), 2% (P1), 4% (P2) and 8% (P3). Experimental stuffings were heat treated in water bath and stored for 3 weeks under refrigeration. Thermal drip, yield of production process, NaCl, NaNO2 contents, texture profile analysis and physical parameters of colour (according to the CIE L*a*b* colour scale) were determined. Sensory assessment included: overall appearance, colour, odour and consistency of model meat products. It was observed that addition of egg yolk proteins to the model meat products influenced on increasing yield of the production process and on reducing mass losses caused by heat treatment. Furthermore, the addition of protein preparate resulted in increased accumulation of sodium nitrite in experimental products, what may be take into consideration in further studies on reducing the level of this substance in meat processing. The values of hardness, gumminess and chewiness of experimental samples were higher (α ≤ 0.05) than those obtained for control variant. After 3 weeks of storage model products produced with egg-yolk protein addition were characterized by lower (α ≤ 0.05) value of chewiness than control sample. Moreover, after 24 hours there were no statistical (α ≤ 0.05) differences beetwen b* (yellowness) values of P1 variant meat products and control sausages. All investigated variants after 3 weeks of storage did not differ significantly within L* (lightness) and a* (redness) values. Sensory assessment showed that P1 variant of experimental products obtained the highest scores of colour, consistency and overall appearance.
Źródło:
Challenges of Modern Technology; 2013, 4, 3; 28-32
2082-2863
2353-4419
Pojawia się w:
Challenges of Modern Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The aftermarket additives used in lubricating oils
Autorzy:
Młynarczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/245317.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
lubricating oils
aftermarket additives
boundary laye
wear
Opis:
The paper presents literature review concerning the aftermarket additives used in lubricating oils. Classification, principle of operation and scientific research of aftermarket additive operational effectiveness was presented. In majority of cases lubricating oils modified by aftermarket, additives are tested by means of a four-ball extreme pressure tester T-02 or friction machine T-05. Tester T-02 is used to determine lubricating oil parameters like weld load Pz, maximum non-seizure load Pn, seizure load Pt, load wear index Ih and load limit of wear Goz according to Polish Norm (PN-76/C-04147). Investigation of the tribological properties (friction force, wear of the matching elements) is executed by means of friction machine T-05. Until now, scientific research does not result in unequivocal assessment of the aftermarket additives. It come from big variety of aftermarket additives (chemical interaction aftermarket additives, additives that contain molecules of solid lubricants, additives that are able to form conditions for selective transfer lubrication) and their various principles of operation. Now the chemical interaction aftermarket additives have the widest application. These additives join permanently with lubricating oil, so they do not precipitate on the filters and do not create heat-insulating layers unlike the additives which contain molecules of solid lubricants (for example PTFE). Chemical interaction aftermarket additives improve antiwear (AW) and antiseizue (EP) properties of lube oils, decrease temperature in friction area and consequently minimize wear of the machines metal elements. Their functioning efficiency is usually the highest in hard working conditions (high loads, polluted environment, deteriorating technical condition of friction node elements) and in case of oils worse equipped with AW and EP additives (machine and hydraulic oils). In case of polymers, the influence of aftermarket additives is ambiguous.
Źródło:
Journal of KONES; 2013, 20, 4; 293-298
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Functional additives for lubricants of motor-axial bearings of locomotives
Autorzy:
Kolesnikov, V.
Myasnikova, N.
Savenkova, M.
Luneva, E.
Myasnikov, P.
Migal, J.
Powiązania:
https://bibliotekanauki.pl/articles/374244.pdf
Data publikacji:
2011
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
tribosystem
smarowanie
dodatek funkcjonalny
lubrication
functional additives
Opis:
In article possibility of increase in a resource of work of motor-axial bearings of locomotives is considered by quality improvement of lubricants at introduction in their structure of functional additives.
Źródło:
Transport Problems; 2011, 6, 3; 87-92
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zdrowotne właściwości jogurtów smakowych
Health proprerties of flavored yoghurt
Autorzy:
Szwedziak, K.
Antczak, D.
Powiązania:
https://bibliotekanauki.pl/articles/228615.pdf
Data publikacji:
2016
Wydawca:
Wyższa Szkoła Menedżerska w Warszawie
Tematy:
jogurty smakowe
substancje dodatkowe
yogurt flavors
additives
Opis:
W artykule przedstawiono surowce wykorzystywane do produkcji jogurtów smakowych oraz właściwości zdrowotne jogurtów. W tym celu dokonano analizy porównawczej składu wybranych jogurtów powszechnie dostępnych w obrocie handlowym. Wyniki przedstawiono za pomocą wykresu.
The article presents the raw materials used to produce yogurt taste and their health benefits. For this purpose, a comparative analysis of the composition of selected yoghurts widely available commercially. The results are shown graphically.
Źródło:
Postępy Techniki Przetwórstwa Spożywczego; 2016, 1; 19-21
0867-793X
2719-3691
Pojawia się w:
Postępy Techniki Przetwórstwa Spożywczego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improvement of the stainless steel electropolishing process by organic additives
Autorzy:
Lochynski, P.
Kowalski, M.
Szczygiel, B.
Kuczewski, K.
Powiązania:
https://bibliotekanauki.pl/articles/779206.pdf
Data publikacji:
2016
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
electropolishing
organic additives
surface roughness
stainless steel
Opis:
The influence of organic additives on the process of surface electropolishing of AISI 304 type steel was determined. Additives were selected in initial potentiodynamic tests pursuant to the plateau analysis on the current/potential curves. The assessment of the operational effectiveness of additives consisted in determining the relationship between surface gloss after electropolishing and the mass loss of the sample and in determining surface roughness. The applied electropolishing bath consisted of a mixture of concentrated acids: H3PO4  and H2SO4 and the following organic additives were used: triethylamine, ethanolamine, diethanolamine, triethanolamine, diethylene glycol monobutyl ether and glycerol. The best electropolishing result, i.e. low roughness and high gloss of stainless steel surface with a relatively low mass loss of the sample at the same time were obtained for baths containing triethanolamine.
Źródło:
Polish Journal of Chemical Technology; 2016, 18, 4; 76-81
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Encapsulation of hydroxycitronellal in β-cyclodextrin and the characteristics of the inclusion complex
Autorzy:
Zhu, Guangyong
Xiao, Zuobing
Zhou, Rujun
Liu, Junhua
Zhu, Guangxu
Powiązania:
https://bibliotekanauki.pl/articles/2204143.pdf
Data publikacji:
2023
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
food additives
encapsulation
aroma
controlled release
flavor
Opis:
Hydroxycitronellal has been widely used in foods, beverages, perfumery and cosmetics. It can also be used to treat anxiety. The major drawbacks regarding the use of hydroxycitronellal are related to water insolubility, volatility, instability, and sensitization. To overcome these concerns, β-cyclodextrin was adopted as wall material to encapsulate hydroxycitronellal in this work. Hydroxycitronellal-β-cyclodextrin inclusion complex was prepared and the product was characterized. The interaction of hydroxycitronellal and β-cyclodextrin, and the assembly of hydroxycitronellal-β-cyclodextrin inclusion complex were investigated by molecular simulation (MM). The results showed that hydroxycitronellal loading capacity was 8.5%. The thermal stability and lastingness of hydroxycitronellal were im-proved by the formation of the inclusion complex. The minimum binding energy was –151.2 kJ/mol. Among the perpendicular, staggered parallel and ideally parallel orientation of the inclusion complexes, the minimum energy value was found for the staggered parallel arrangement. These basic data are useful to understand the interaction between hydroxycitronellal and β-cyclodextrin.
Źródło:
Polish Journal of Chemical Technology; 2023, 25, 1; 20--27
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Domieszki do modyfikacji betonu
Autorzy:
Szruba, M.
Powiązania:
https://bibliotekanauki.pl/articles/366037.pdf
Data publikacji:
2018
Wydawca:
Nowoczesne Budownictwo Inżynieryjne
Tematy:
beton
konstrukcja
właściwości
dodatki
concrete
construction
properties
additives
Opis:
Stosowanie domieszek i dodatków do betonu to obecnie powszechna praktyka w wysoko uprzemysłowionych krajach świata. To dzięki nim możliwa jest poprawa wielu istotnych właściwości tego podstawowego tworzywa konstrukcyjnego, a także jego funkcji dekoracyjnych. Rynek chemii i domieszek do betonu stale się rozwija, podążając w ślad za coraz wyższymi wymaganiami stawianymi konstrukcjom pod względem nośności, użytkowalności i związanym z tym poszukiwaniem doskonalszych sposobów polepszania właściwości betonu.
Źródło:
Nowoczesne Budownictwo Inżynieryjne; 2018, 3; 60-64
1734-6681
Pojawia się w:
Nowoczesne Budownictwo Inżynieryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Plants as a treasury of fragrant substances for food industry and perfumery
Autorzy:
Danel, Andrzej
Puła, Joanna
Powiązania:
https://bibliotekanauki.pl/articles/2176801.pdf
Data publikacji:
2019-12-31
Wydawca:
Uniwersytet Pedagogiczny im. Komisji Edukacji Narodowej w Krakowie
Tematy:
essential oils
extraction techniques
food additives
fragrant substances
Opis:
Artykuł poświęcony jest niektórym aspektom substancji zapachowych pochodzenia roślinnego, stosowanych jednocześnie w przemyśle spożywczym i perfumeryjnym. Od starożytności opracowano wiele technik ekstrakcji w celu uzyskania olejków eterycznych. Niektóre z nich są nadal stosowane. Nowe ekstrakcje, takie jak: mikrofalowe lub ultradźwiękowe, są coraz bardziej popularne i pozwalają zaoszczędzić czas oraz koszty. Niezależnie od procedury powstałe olejki eteryczne są źródłem wielu związków chemicznych, tzw. izolatów. Mogą one być stosowane jako dodatki do żywności lub jako materiały wyjściowe do syntezy organicznej. Niektóre substancje zapachowe występują w bardzo małych ilościach w materiale roślinnym, dlatego ekstrakcja nie jest opłacalna ekonomicznie, ale po ustaleniu ich struktur chemicznych i opracowaniu procedur syntetycznych, w niektórych przypadkach są one pozyskiwane na skalę przemysłową. Substancje opisane poniżej to tylko niewielka część z 2000-3000 pachnących cząsteczek, które sprawiają, że nasze życie jest przyjemniejsze, zarówno w jedzeniu, jak i perfumach.
Źródło:
Annales Universitatis Paedagogicae Cracoviensis Studia Naturae; 2019, 4; 149-160
2543-8832
2545-0999
Pojawia się w:
Annales Universitatis Paedagogicae Cracoviensis Studia Naturae
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies