Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Wrobel, E" wg kryterium: Autor


Tytuł:
Centrum kształcenia Kadr Lotnictwa Cywilnego Europy Środkowo-Wschodniej Politechniki Śląskiej jako alternatywa kształcenia lotniczego
Civil Aviation Personnel Edication Centre of Middle and Eastern Europe Silesian Unicersity of Technology as alternative aviation education
Autorzy:
Fellner, A.
Wróbel, E.
Powiązania:
https://bibliotekanauki.pl/articles/213864.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
Centrum Kształcenia Kadr Lotnictwa Cywilnego Europy Środkowo-Wschodniej Politechniki Śląskiej
kształcenie lotnicze
Civil Aviation Personnel Education Centre of Middle and Eastern Europe Silesian University of Technology
aviation education
Opis:
Z opracowań ULC wynika, że w ciągu najbliższych pięciu lat potrzebnych będzie około 23 tys. licencjonowanych specjalistów lotniczych. Natomiast międzynarodowe źródła podają, że obsługa lotnisk, przestrzeni powietrznej, wymaga licencjonowanych specjalistów, menedżerów lotniczych oraz fachowców od szeroko pojętej nawigacji powietrznej. Stwierdzono, że każdy milion pasażerów generuje zatrudnienie tysiąc osób bezpośrednio na lotnisku, 3 tys. osób wokół niego (w usługach, handlu itp.) oraz 15 tys. w całym regionie, obsługiwanym przez port lotniczy. Opracowany przez Ministerstwo Transportu "Program Rozwoju Sieci Lotnisk i Lotniczych Urządzeń Naziemnych" zostal przyjęty Uchwałą Rady Ministraw Nr 86/2007 w dniu 8 maja 2007 r. i tym samym stał się dokumentem rządowym. Wskazuje kierunki rozwoju infrastruktury lotniskowej oraz nawigacyjnej do 2020 r., stanowiącej spójny element komunikacyjny kraju i Europy. Program stanowi strategiczny materiał wspomagający formułowanie wniosków o środki na rozwój infrastruktury lotniczej na lata 2007-2013 z Funduszu Spójności jak i z Europejskiego Funduszu Rozwoju Regionalnego. Powyższe uwarunkowania, rozwój naukowo- techniczny, determinują znaczenie nawigacji jako dyscypliny naukowej, kierunku studiów czy też specjalności. Natomiast ustawa, rozporządzenia ministerialne, podpisane porozumienia i powołana Rada Naukowo-Programowa, umożliwia funkcjonowanie utworzonego w 2008 roku Centrum Ksztatcenia Kadr Lotnictwa Cywilnego Europy Środkowo-Wschodniej na Politechnice Śląskiej. Jego zadaniem jest uruchamianie nowych kierunków studiów, specjalności, specjalizacji, kursów lotniczych. Natomiast uruchomienie nowej specjalności - nawigacji powietrznej na bazie powołanego Centrum, powinno doprowadzić do standaryzacji procedur m.in. do zcertyfikowania satelitarnych systemów - pomocy nawigacyjnych oraz powiązanie ich z systemami informacji geograficznej (GIS). Istotnym jest fakt, że powołane Centrum nastawione jest na szeroko rozumianą współpracę. Obecnie Politechnika Śląska udostępnia infrastrukturę dydaktyczno-szkoleniową, koordynuje działania organizacyjne Centrum i prowadzi podyplomowe studia dla pracowników lotnisk oraz wszystkich zainteresowanych w zakresie organizacji lotnictwa cywilnego w Unii Europejskiej. Równocześnie przygotowane są już programy kolejnych studiów podyplomowych związanych z informatyką i telekomunikacją w lotnictwie a także projektowaniem lotnisk i planami generalnymi. Urząd Lotnictwa Cywilnego będący stroną porozumienia zapewnia autoryzację licencyjnych programów szkolenia lotniczego oraz nadzór gwarantujący zgodność studiów, szkoleń i kursów z międzynarodowymi standardami lotnictwa cywilnego. Z Centrum współpracuje także Polska Agencja Żeglugi Powietrznej. Bardzo ważnym jest fakt, że stroną porozumienia powołujacego Centrum jest Górnośląskie Towarzystwo Lotnicze S.A. zarządzające międzynarodowym lotniskiem "Katowice" w Pyrzowicach. Tym samym udostępniona jest dla potrzeb kształcenia infrastruktura międzynarodowego lotniska - MPL Katowice - Pyrzowice. Równocześnie Centrum jest organizatorem i koordynatorem kształcenia kadry dla szeroko rozumianego sektora lotnictwa cywilnego przez wspólpracę z technicznymi szkołami średnimi w regionie.
Conducted investigations prove that he will be about 23 000 licensed air experts. However international sources pass, that the service of airports, the airspace, requires licensed experts, air managers and experts from comprehended wide air navigation. It was affirmed, that passengers every million generates the employment persons thousand directly on airport, 3 000 persons around him (in services, itp. trade) and 15 000 in the whole region, served through the air harbour. The „Program Rozwoju Sieci Lotnisk i Lotniczych Urządzeń Naziemnych", Worked out by the Ministry Transportation, shows the directions of the development of the aircraft and navigational infrastructure to 2020, makes up the coherent element the communication country and Europe. The programme makes up strategic material helping formulating conclusions about the centres on the development of the air infrastructure on years 2007-2013. Above mentioned conditions, development scientifically - technical, they determine the meaning of navigation as scientific discipline, the direction of studiess or also the speciality. However law, ministerial decrees, undersigned agreements and competent Scientifically-Program Counsel makes possible working of The Civil Aviation Personnel Education Centre of Central and Eastern Europe Silesian University of Technology, created in 2007. Starting the new directions of studiess, speciality, specialisation, air course is his task. However starting the new speciality - air navigation on the base of the qualified Centre, he should conduct to the certification of satellite systems - navigational aids and connection of them with the systems of geographical information (GIS). Essential there is the fact that the qualified Centre is set on the understood wide cooperation. The programmes of next postgraduate studiess connected with computer science and telecommunication in aviation are already prepared simultaneously and also projecting airports and general plans. The Civil Aviation Office, which is the side of the agreement assures the authorization of the licence programmes of air training and supervision guaranteeing the agreement of studiess, training and course with the international standards of civil aviation. The Poland also cooperates from the Polish Air Navigation Service Agency. Very important there is the fact that the GTL is the side of the agreement of the appointing Centre S.A. the manageress the international airport "Katowice - Pyrzowice". The same is made accessible for the needs education the infrastructure of the international airport - MPL Katowice - Pyrzowice. The Centre is organizer and coordinator of the education of the personnel for the understood wide sector of civil aviation by the cooperation with technical average schools in the region simultaneously.
Źródło:
Prace Instytutu Lotnictwa; 2011, 2 (211); 68-75
0509-6669
2300-5408
Pojawia się w:
Prace Instytutu Lotnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reakcja bobiku (Vicia faba L.. minor Harz.) na sposób uprawy roli oraz gęstość siewu
Response of faba bean (Vicia faba L. minor Harz.) to different soil cultivation methods and sowing rate
Autorzy:
Bogucka, B.
Wrobel, E.
Powiązania:
https://bibliotekanauki.pl/articles/46988.pdf
Data publikacji:
2008
Wydawca:
Politechnika Bydgoska im. Jana i Jędrzeja Śniadeckich. Wydawnictwo PB
Tematy:
bobik
cechy morfologiczne
gestosc siewu
metody uprawy
obsada roslin
plony
reakcje roslin
uprawa roli
uprawa uproszczona
Vicia faba var.minor
faba bean
morphological feature
sowing density
cultivation method
plant density
yield
plant response
soil cultivation
simplified tillage
Opis:
Badania przeprowadzono w Zakładzie Produkcyjno-Doświadczalnym Bałcyny (53o35′ N; 19o51′ E) w latach 2000-2002. Celem eksperymentu było określenie wpływu uproszczeń uprawy roli i zróżnicowanej obsady roślin bobiku odmiany Tim na jednostce powierzchni na cechy morfologiczne i plon bobiku. W przeprowadzonym doś-wiadczeniu zagęszczenie roślin bobiku było jedynym czynnikiem różnicującym w sposób istotny wysokość osadzenia pierwszego strąka, liczbę strąków na roślinie, masę tysiąca nasion oraz plon nasion bobiku. W latach badań potwierdził się związek pomiędzy warun-kami termiczno-wilgotnościowymi a elementami struktury plonu.
The study was conducted in north-eastern Poland (53o35′ N; 19o51′ E), over 2000-2002. The aim of the experiment was to determine the effect of simplified tillage and different plant density per area unit on the morphometric characters and yield of faba bean cv Tim. Plant density was found to be the only factor which significantly affected first pod height, the number of pods per plant, thousand seed weight and seed yield. A correlation between temperature and moisture conditions and yield structure components was observed throughout the study period.
Źródło:
Acta Scientiarum Polonorum. Agricultura; 2008, 07, 2
1644-0625
Pojawia się w:
Acta Scientiarum Polonorum. Agricultura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Projekt aparatu do korekcji przodozgryzu
Anteroclusion correction apparatus
Autorzy:
Wróbel, E.
Sajewicz, E.
Powiązania:
https://bibliotekanauki.pl/articles/98696.pdf
Data publikacji:
2014
Wydawca:
Politechnika Śląska. Katedra Biomechatroniki
Tematy:
przodozgryz
korekcja
aparat
anteroclusion
correction
apparatus
Opis:
Celem niniejszego artykułu jest przedstawienie nowego typu aparatu do korekcji przodozgryzu. Urządzenie jest oparte na budowie klasycznej procy bródkowej. Tekst zawiera opis budowy, zasadę działania, jak i analizę zaprojektowanego urządzenia. Aby podkreślić innowacyjność urządzenia, zaprezentowano istniejące już metody korekcji prognatyzmu oraz założenia, którymi się kierowano podczas projektowania.
The purpose of this article is to present a new type of the anteroclusion correction apparatus. This apparatusis is based on a classical chin cap. Text contains description of structure, principle of operation and analysis of this project. The article presents existing apparatus and assumption correction methods, which were helpful during projecting process. In addition it shows the project's innovation.
Źródło:
Aktualne Problemy Biomechaniki; 2014, 8; 173-180
1898-763X
Pojawia się w:
Aktualne Problemy Biomechaniki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ sposobu ochrony przed chorobami grzybowymi na plonowanie pszenżyta ozimego
Autorzy:
Wrobel, E.
Jablonski, H.
Powiązania:
https://bibliotekanauki.pl/articles/46907.pdf
Data publikacji:
2004
Wydawca:
Politechnika Bydgoska im. Jana i Jędrzeja Śniadeckich. Wydawnictwo PB
Tematy:
zaprawy nasienne
struktura plonu
fungicydy
zwalczanie chorob roslin
ochrona roslin
rozwoj roslin
wzrost roslin
choroby grzybowe
plonowanie
pszenzyto ozime
fungal disease
fungicide
plant development
plant disease control
plant growth
plant protection
seed treatment
winter triticale
yield structure
yielding
Opis:
W ścisłym doświadczeniu polowym badano wpływ różnych sposobów ochrony przed chorobami grzybowymi (ochrona pełna, sterowana, bez ochrony) na wzrost, rozwój i plonowanie pszenżyta ozimego odmiany Bogo. W latach badań zasiewy były porażone przez septoriozę liści i plew. W drugim roku badań w bardzo niewielkim nasileniu wystąpiła dodatkowo fuzarioza kłosów. Sposób aplikacji fungicydów istotnie zróżnicował stopień porażenia roślin przez choroby. Dwukrotne stosowanie fungicydu w czasie wegetacji stanowiło najskuteczniejszą ochronę przed wszystkimi chorobami. Całkowita rezygnacja ze stosowania fungicydów spowodowała obniżkę plonu o 15%.1
In field trial the effects of different methods of fungal disease control on growth, development and yield of ‘Bogo’ winter triticale were studied. The following treatments were compared: full control, integrated control and no control of fungal diseases. Over the research years the plantations were infected by leaf and husk septoria. In the second research year there was also observed, however at low intensity, ear fasariosis. The method of fungicide application showed significant differences in the degree of plant infection. The fungicide applied twice during the vegetation period was the most effective method of protection. When no fungicide was applied, the yield decreased by 15%.
Źródło:
Acta Scientiarum Polonorum. Agricultura; 2004, 03, 1; 55-61
1644-0625
Pojawia się w:
Acta Scientiarum Polonorum. Agricultura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tissue engineering of bone: the role of osteoblasts in osteogenesis and peri-implant bone healing
Autorzy:
Wróbel, E.
Witkowska-Zimny, M.
Powiązania:
https://bibliotekanauki.pl/articles/284980.pdf
Data publikacji:
2013
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
bone tissue engineering
osteoblasts
human bone-derived cells
peri-implant bone healing
osteogenesis
cell culture
Opis:
Osteoblasts are cells of mesenchymal origin, which rebuild resorbed bone by synthesizing bone matrix proteins and by inducing bone matrix mineralization. Osteoblasts play a crucial role in creating and maintenance of healthy bone architecture, bone repair, and peri-implant bone healing (osseointegration). These bone-forming cells are also involved in regulation of osteoclasts function, and hence bone resorption in osteoclastogenesis process. We have presented our own studies on the subsequent stages of differentiation of Human Bone-Derived Cells (HBDCs) that could be a good candidate as an autogenous source for reconstruction and rebuilding of own patient's bone using tissue engineering methods. In this review we discussed the biology of osteoblasts, compared with the HBDCs cultures, under the influence of growth factors (FGF-2, TGF-ß, IGF, PDGF) and hormones (PTH, 1,25-dihydroxyvitamin D3, leptin). Our review is also focused on the participation of intercellular adhesion proteins (cadherins, claudins, connexin, 'OsteoMacs'), transcription factors (Cbfal, Msx-2, Osx, ATF4), and others molecules (RANKL, OPG, BMP2, lactofferin, PPARY) in modulating osteoblasts functions on the basis of current reports, throwing new light on the involvement of osteoblasts during osteogenesis and peri-implant bone healing.
Źródło:
Engineering of Biomaterials; 2013, 16, 119; 2-7
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Polarx3 receiver in Egnos data collection network
Autorzy:
Antemijczuk, O.
Cyran, K.
Wróbel, E.
Powiązania:
https://bibliotekanauki.pl/articles/393637.pdf
Data publikacji:
2009
Wydawca:
Polskie Stowarzyszenie Telematyki Transportu
Tematy:
EGNOS
EDCN
GNSS
różnicowy GPS
differential GPS
Opis:
The paper describes the results of engagement into international cooperation within the EDCN network and it draws conclusions based on experience in monitoring of the EGNOS system. Experience gained by the authors in the EDCN project course is expected to have a serious impact on the research and development dedicated for enhancement of the reliability of the EDCN network. Therefore, in the paper not only current results of cooperation are presented, but also the challenging issues to be resolved in the future based on the conclusions drawn on experience gained.
Źródło:
Archives of Transport System Telematics; 2009, 2, 3; 31-36
1899-8208
Pojawia się w:
Archives of Transport System Telematics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przydatność mieszańców kukurydzy o zróżnicowanej wczesności do uprawy na kiszonkę w warunkach województwa warmińsko-mazurskiego
Suitability of early and mid-early maize hybrids grown in the province of Warmia and Mazury for silage production
Autorzy:
Szemplinski, W.
Bogucka, B.
Wrobel, E.
Powiązania:
https://bibliotekanauki.pl/articles/47167.pdf
Data publikacji:
2009
Wydawca:
Politechnika Bydgoska im. Jana i Jędrzeja Śniadeckich. Wydawnictwo PB
Tematy:
gestosc siewu
kukurydza
mieszance
plony
terminy siewu
uprawa na kiszonke
uprawa roslin
wczesnosc mieszancow
woj.warminsko-mazurskie
sowing density
maize
hybrid
yield
sowing term
silage production
plant cultivation
hybrid earliness
Warmia-Mazury voivodship
Opis:
W pracy przedstawiono wyniki badań przeprowadzonych w latach 2000- -2002 w Zakładzie Produkcyjno-Doświadczalnym w Bałcynach (53o35’ N; 19o51’ E). Badania miały na celu określenie przydatności na kiszonkę z całych roślin dwóch mieszańców kukurydzy: Wilga – FAO 190 i Bzura – FAO 239, uprawianych w zróżnicowanych warunkach terminu siewu (trzecia dekada kwietnia – termin wczesny, pierwsza dekada maja – termin opóźniony o 2 tygodnie) i gęstości siewu (8, 12 i 16 roślin na m2). Wykazano, że plon surowca kiszonkowego był determinowany warunkami pogodowymi w poszczególnych latach badań. W warunkach województwa warmińsko-mazurskiego bardziej przydatna do uprawy na kiszonkę z całych roślin, ze względu na wyższy plon świeżej i suchej masy oraz jakość surowca, okazał się średnio wczesny mieszaniec Bzura. Wysiew kukurydzy w pierwszej dekadzie maja w porównaniu z wysiewem o dwa tygodnie wcześniejszym stwarzał lepsze warunki do wzrostu i rozwoju, co skutkowało istotnym zwiększeniem plonu świeżej i suchej masy surowca kiszonkowego oraz plonu białka ogólnego i energii brutto. Wysiew kukurydzy w zagęszczeniu 16 roślin na m2 zapewniał najwyższe plony świeżej masy, a dla plonów suchej masy, białka ogólnego i energii brutto wystarczający okazał się wysiew 12 roślin na m2.
The paper presents the results of a study conducted during the years 2000 – 2002 at the Production and Experimental Station in Bałcyny (53o35’ N; 19o51’ E). The objective of this study was to determine the suitability of two maize hybrids, Wilga (FAO 190) and Bzura (FAO 239), for the production of silage as dependent on sowing time (the last ten days of April – early sowing, the first ten days of May – sowing delayed by two weeks) and density of sowing (8, 12 or 16 plants per m2). It was demonstrated that the yield of silage raw material was determined by weather conditions in particular years of the study. The mid-early hybrid Bzura was found to be more suitable for silage production under climate conditions of the Province of Warmia and Mazury, due to a higher yield of both green matter and dry matter, and a higher quality of raw material. Sowing in the first ten days of May, as compared with sowing in the last ten days of April, provided more favorable conditions for plant growth and development, which resulted in a significant increase in the yield of green matter, dry matter and total protein, and in gross energy value. The density of sowing of 16 plants per m2 ensured attaining the highest yield of green matter, while the highest yield of dry matter and total protein as well as the highest gross energy value were reported for the density of sowing of 12 plants per m2.
Źródło:
Acta Scientiarum Polonorum. Agricultura; 2009, 08, 1
1644-0625
Pojawia się w:
Acta Scientiarum Polonorum. Agricultura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nawożenie azotem a plon kukurydzy uprawianej na ziarno w warunkach północno-wschodniej Polski
Effect of nitrogen fertilization on the yield of grain maize grown under climate conditions of north-eastern Poland
Autorzy:
Bogucka, B.
Szemplinski, W.
Wrobel, E.
Powiązania:
https://bibliotekanauki.pl/articles/47280.pdf
Data publikacji:
2008
Wydawca:
Politechnika Bydgoska im. Jana i Jędrzeja Śniadeckich. Wydawnictwo PB
Tematy:
dawki nawozowe
kukurydza
kukurydza Boruta
kukurydza Junak
nawozenie azotem
odmiany roslin
plony
Polska Polnocno-Wschodnia
struktura plonu
uprawa na ziarno
uprawa roslin
wczesnosc dojrzewania
ziarno
Boruta cultivar
grain
Junak cultivar
North-Eastern Poland
fertilizer dose
maize
nitrogen fertilization
plant cultivar
plant cultivation
yield
yield structure
Opis:
Eksperyment polowy przeprowadzono w latach 2003-2005 w Zakładzie Produkcyjno-Doświadczalnym w Bałcynach (53o35’ N; 19o51’ E). Badania miały na celu określenie wpływu zróżnicowanego nawożenia azotem na plonowanie i cechy jakościowe dwóch mieszańców kukurydzy uprawianej na ziarno – Junak (FAO 210-220) i Boruta (FAO 230-240). Zakres badań obejmował ocenę cech morfologicznych roślin, plon ziarna i jego strukturę oraz analizy chemiczne ziarna. Plony ziarna kukurydzy uprawianej w północno-wschodnim regionie kraju wahały się od 6,67 do 11,16 t·ha-1 i były istotnie determinowane przez warunki termiczno-wilgotnościowe w latach badań. W roku bardzo wilgotnym wyższym poziomem plonowania cechowała się odmiana Junak, natomiast w latach o korzystniejszych warunkach pogodowych plenniejsza okazała się odmiana Boruta. Odmiany Junak i Boruta – pomimo różnic w klasach wczesności – plonowały na wysokim, zbliżonym poziomie (8,48 i 8,68 t·ha-1), co wskazuje na ich przydatność do uprawy na ziarno w północno-wschodniej Polsce. Pod wpływem nawożenia średnie plony ziarna wzrastały regularnie do dawki 150 kg N·ha-1. Dla odmiany Junak wystarczające okazało się nawożenie 150 kg N·ha-1, a dla odmiany Boruta dawkę azotu można zwiększyć do 180 kg·ha-1.
A field experiment was conducted at the Production and Experiment Station in Bałcyny in north-eastern Poland (53o35’ N; 19o51’ E) during the years 2003-2005 to evaluate the effect of different levels of nitrogen fertilization on the yield and qualitative characters of two hybrid grain maize cultivars, Junak (FAO 210-220) and Boruta (FAO 230-240). The morphological characters of maize plants, grain yield and yield structure were determined, and grain samples were subjected to chemical analyses. It was found that the grain yield of maize grown in north-eastern Poland ranged from 6.67 to 11.16 t·ha-1, and it was greatly dependent on temperature and moisture conditions in particular years of the study. Cv. Junak was characterized by a higher yield in the wet year, while cv. Boruta showed a higher yield in years with more favorable weather conditions. A high and comparable grain yield (8.48 and 8.68 t·ha-1) was reported for both cultivars, despite differences between them in respect of the maturity class (FAO ripeness class). This indicates that the grain maize cultivars Junak and Boruta are suitable for growing in north-eastern Poland. Nitrogen applied at rates of up to 150 kg N·ha-1 contributed to a steady increase in grain yield. Nitrogen fertilization at a level of 150 kg N·ha-1 was sufficient for cv. Junak, whereas in cv. Boruta the rate of nitrogen could be increased to 180 kg N·ha-1.
Źródło:
Acta Scientiarum Polonorum. Agricultura; 2008, 07, 3
1644-0625
Pojawia się w:
Acta Scientiarum Polonorum. Agricultura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wplyw nawozenia na plon i cechy jakosciowe ziemniaka przeznaczonego na czipsy
Autorzy:
Bogucka, B
Wrobel, E
Sienkiewicz, S
Powiązania:
https://bibliotekanauki.pl/articles/800920.pdf
Data publikacji:
2006
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
ziemniaki
plony
nawozenie
cechy jakosciowe
chipsy
przetworstwo ziemniaka
odmiany roslin
potato
yield
fertilization
qualitative trait
crisp
potato processing
plant cultivar
Opis:
The effects of different nitrogen fertilization rates (100, 125 kg N·ha⁻¹) on the yield and qualitative characters of one German (Romula) and two Dutch (Lady Claire, Saturna) chip potato cultivars were studied. Field experiment was conducted within 2003-2005 in NE Poland, by using the randomized block and split-plot method, in four replications. The total tuber yield, yield structure, starch content, starch yield, concentration of reducing sugars, suitability of potato tubers for frying, as well as gross and marginal fertilization efficiency, were determined. The growing seasons 2003 and 2005 were classified as dry and warm, whereas the year 2004 was described as wet and warm. The highest total and marketable tuber yields and the highest starch yield were attained in case of the medium-early cultivar Romula. Romula cv. was also characterized by the lowest proportion of small tubers (< 40 mm) and the highest proportion of large tubers (> 60 mm). This cultivar responded to an increase in nitrogen rate by the highest gross productivity. The medium-late Saturna cultivar showed the highest starch content, at highest proportion of small tubers (< 40 mm), lowest proportion of large tubers, and the lowest marketable tuber yield. The early Lady Claire cultivar provided the lowest total tuber yield as well as the lowest yield and content of starch. Both, the concentration of reducing sugars and suitability for frying were satisfactory in all tested potato cultivars. The effect of nitrogen fertilization on total and marketable tuber yield, and starch yield was not confirmed by statistical analysis. Only in 2004 the higher nitrogen rate (125 kg N·ha⁻¹) significantly increased the starch content in tubers.
Określono wpływ zróżnicowanego nawożenia doglebowego, azotowego 100, 125 kg N·ha⁻¹ na plonowanie i cechy jakościowe jednej niemieckiej (Romula) i dwóch holenderskich (Lady Claire, Saturna) odmian ziemniaka na czipsy w latach 2003-2005 w północno-wschodniej Polsce. Doświadczenie polowe założono metodą losowanych bloków i podbloków w czterech powtórzeniach. Zakres badań obejmował plon ogólny bulw i jego strukturę, zawartość i plon skrobi, zawartość glukozy, ocenę przydatności bulw ziemniaka do wysmażania oraz efektywność nawożenia brutto i krańcową. Sezon wegetacyjny 2003 i 2005 roku zakwalifikowano jako suchy i ciepły, natomiast rok 2004 określono z kolei jako mokry i ciepły. Najwyższy plon ogólny i handlowy bulw oraz plon skrobi uzyskano z uprawy średnio wczesnej odmiany Romula. Odmiana Romula wyróżniała się najmniejszym udziałem bulw drobnych < 40 mm i największym udziałem bulw dużych > 60 mm. Odmiana ta zareagowała na wzrost dawki azotu najwyższą produktywnością brutto. Odmianę średnio późną Saturna cechowała najwyższa zawartość skrobi, największy udział bulw drobnych < 40 mm, a zarazem najmniejszy udział bulw dużych oraz najniższy plon handlowy bulw. Z wczesnej odmiany Lady Claire uzyskano najniższy plon ogólny bulw, najniższą zawartość i plon skrobi. Zarówno zawartość glukozy, jak i przydatność do wysmażania u wszystkich odmian ziemniaka była na wymaganym poziomie. Nie udowodniono statystycznie wpływu nawożenia azotowego na plon ogólny i handlowy bulw oraz plon skrobi. Jedynie w 2004 r. wyższe nawożenie azotem 125 kg·ha⁻¹ istotnie zwiększyło zawartość skrobi w bulwach. Nie stwierdzono wpływu zróżnicowanego nawożenia N na barwę czipsów.
Źródło:
Zeszyty Problemowe Postępów Nauk Rolniczych; 2006, 511, 1; 197-208
0084-5477
Pojawia się w:
Zeszyty Problemowe Postępów Nauk Rolniczych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Niektore zwiazki fenolowe jeczmienia browarnego
Autorzy:
Klepacka, J
Fornal, L.
Borejszo, Z.
Wrobel, E.
Powiązania:
https://bibliotekanauki.pl/articles/827167.pdf
Data publikacji:
2000
Wydawca:
Polskie Towarzystwo Technologów Żywności
Tematy:
jeczmien browarny
jeczmien Maresi
ziarno
barwa
kwas ferulowy
zwiazki fenolowe
jakosc browarna
ocena jakosci
nawozenie azotem
brewery barley
Maresi cultivar
grain
colour
ferulic acid
phenolic compound
malting quality
quality evaluation
nitrogen fertigation
Opis:
Analizowano zawartość związków fenolowych ogółem, wolnych, w połączeniach estrowych i kompleksowych w ziarnie jęczmienia browarnego odmiany Maresi, uprawianego przy zróżnicowanym poziomie nawożenia azotowego. Stwierdzono wyraźnie większą zawartość związków fenolowych ogółem w otrębach, w porównaniu z mąką oraz ich wzrost wraz ze zwiększaniem nawożenia azotowego. Wykazano, że kwas ferulowy nie występuje w połączeniach estrowych, natomiast jego ilość w połączeniach kompleksowych zwiększa się wraz ze stosowaniem nawożenia azotowego. Gęstość optyczna (barwa) ziarniaków jęczmienia zmieniała się wraz ze wzrostem nawożenia azotowego i zawartości kwasu ferulowego w połączeniach kompleksowych.
Content of total, free, bound in esters and complexes phenolic compounds, particularly ferulic acid, in malting barley variety Maresi cultivated at different level of nitrogen fertilization was analysed. It was shown that level of total phenolic compounds was higher in bran than in flour of barley, and amount of them increased with the level of nitrogen fertilization. The ferulic acid is not bound in esters, and content of this acid bound in complexes increases with the level of nitrogen fertilization. Optical density (colour) of barley grain changed with increasing of nitrogen fertilization and content of ferulic acid bound in complexes.
Źródło:
Żywność Nauka Technologia Jakość; 2000, 07, 4; 64-71
1425-6959
Pojawia się w:
Żywność Nauka Technologia Jakość
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Integrin αv signaling influences phenotype and maturation of primary human osteoblasts on alumina surface
Autorzy:
Wróbel, E.
Witkowska-Zimny, M.
Mrówka, P.
Głodkowska-Mrówka, E.
Powiązania:
https://bibliotekanauki.pl/articles/284664.pdf
Data publikacji:
2014
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
integrin
human bone-derived cells
osteogenic differentiation
cell adhesion
biomaterial
Opis:
Due to the growing interest in stem cells application in tissue engineering the better understanding of primary human osteoblasts behavior in vitro, on biomaterial surface, is required. Among other molecules integrins may be taken into account as being involved in these phenomena. Integrins are a family of cell adhesion receptors, which may regulate many cellular functions e.g., adhesion, motility, phenotype and cell maturation. The aim of this study was to determine the effect of the biomaterial surfaces and αv integrin signaling pathway on the behavior, phenotype and maturation of human osteoblasts in vitro. Human bone derived cells (HBDCs) obtained from adult femoral bone fragments were cultured on both alumina disks and tissue culture polystyrene (TCPS) dishes. After 7, 14, and 21 days of culture, localization and mRNA expression level of αv integrin subunits and BGLAP (osteocalcin) on polystyrene were analyzed in addition, we treated the cell cultures with monoclonal antibodies against human αv integrin to block its ligand-binding activity, on both alumina and TCPS substrates. We found that the αv integrin was present in focal contacts and cell cytoplasm at subsequent stages of cell maturation and the level of αv integrin mRNA was the highest in mature osteoblasts. Blocking αv integrin transduction pathway caused changes in cell activity and morphology, decreased cells proliferation on TCPS and reduced expression of alkaline phosphatase (ALP) on both materials. The results suggest that αv integrin is involved as an important receptor facilitating osteogenic differentiation.
Źródło:
Engineering of Biomaterials; 2014, 17, 127; 33-39
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Plon i zawartość związków organicznych w bulwach ziemniaka w zależności od dawki azotu i techniki nawożenia
Yield and content of organic compounds in potato tubers depending on nitrogen dose and technique of fertilization
Autorzy:
Wojnowska, T.
Wrobel, E.
Sienkiewicz, S.
Mozolewski, W.
Krzebietke, S.
Powiązania:
https://bibliotekanauki.pl/articles/805214.pdf
Data publikacji:
2002
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Opis:
Celem badań było określenie wpływu rzędowego i tradycyjnego stosowania różnych dawek azotu na plon i zawartość skrobi i białka w bulwach ziemniaka. Polowe doświadczenie przeprowadzono w latach 1998 i 1999 w Stacji Doświadczalnej Tomaszkowo należącej do Uniwersytetu Warmińsko-Mazurskiego w Olsztynie. Testowane odmiany wydały istotnie różne plony bulw i plony handlowe (a = 0,05). Najwyższy plon bulw o średnicy > 40 mm wydała odmiana Rywal. Rzędowe nawożenie azotem w porównaniu do tradycyjnej metody spowodowało wzrost plonu o 1,8 t·ha⁻¹. Wzrastające dawki azotu bez względu na metodę aplikowania mocznika przyczyniały się do istotnego wzrostu plonu handlowego. Najwyższą zawartość skrobi stwierdzono w bulwach odmiany Anielka, natomiast białka ogólnego u odmiany Salto. Wyższe plony skrobi i białka ogólnego w bulwach l ziemniaka otrzymano z obiektów nawożonych rzędowo. Technika nawożenkg mocznikiem nie wpłynęła istotnie na zawartość związków organicznych w bulwajj ziemniaka. Na zmienność plonu bulw ziemniaka oraz koncentrację białka i skrobi znaczący wpływ wywierały warunki meteorologiczne.
The studies were aimed at the determination of effects of different nitrogen rates applied in strip fertilization and by traditional method on the yield and content of protein and starch in potato tubers. Field trials were conducted in the seasons 1998 and 1999 at the Experimental Station at Tomaszkowo belonging to Warmia and Mazury University in Olsztyn. Studied cultivars gave significantly different tubers yield and commercial yield (a = 0.05). The highest yield of tubers of the diameter < 40 mm was found for cultivar Rywal (32.8 t·ha⁻¹). Strip application of nitrogen resulted in the yield increase by 1.8 t-ha-1 as compared to traditional method. Increasing nitrogen rates contributed to significant increase of commercial yield irrespectively of the method of nitrogen application. The- highest content of starch was found in tubers of Anielka cv. whereas total protein in Salto cv. Higher yield of starch and total protein were found in tubers obtained in the treatment of row fertilization. The method of urea fertilization did not affect the content of organic compounds in potato tubers. The variability of potato tuber yield and contents of protein and starch were affected by weather conditions.
Źródło:
Zeszyty Problemowe Postępów Nauk Rolniczych; 2002, 489
0084-5477
Pojawia się w:
Zeszyty Problemowe Postępów Nauk Rolniczych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bezprzewodowy pomiar temperatury z wykorzystaniem rezonatora kwarcowego z akustyczną poprzeczną falą powierzchniową
Wireless temperature measurement based on surface transverse wave quartz resonator
Autorzy:
Wróbel, T.
Brzozowski, E.
Powiązania:
https://bibliotekanauki.pl/articles/192127.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Materiałów Elektronicznych
Tematy:
poprzeczna akustyczna fala powierzchniowa
rezonator
czujnik temperatury
czujnik bezprzewodowy
surface transverse wave
resonator
temperature sensor
wireless sensor
Opis:
W artykule przedstawiono wyniki badań urządzenia laboratoryjnego do bezprzewodowego pomiaru temperatury, w którym wykorzystano rezonator kwarcowy z akustyczną poprzeczną falą powierzchniową o liniowej zależności częstotliwości rezonansowej od temperatury. Model urządzenia składa się z części nadawczej i odbiorczej. Układ nadawczy z rezonatorem o środkowej częstotliwości ~ 434 MHz, umieszczonym w pętli sprzężenia zwrotnego szerokopasmowych wzmacniaczy, generuje sygnał, który po wzmocnieniu we wzmacniaczu mocy jest przesyłany przy pomocy anteny do układu odbiorczego. Układ odbiorczy składa się z anteny odbiorczej, z szerokopasmowego wzmacniacza i licznika częstotliwości. Opracowany model umożliwia pomiar temperatury w zakresie 0 ÷ 100 °C z odległości ~ 30 m o dokładności ~ ± 0,2 °C.
In this paper the results of investigation of a laboratory wireless temperature measurement system are presented. A surface transverse wave quartz resonator with a linear dependence of resonance frequency on temperature was used to produce a model of the sensor. The model consists of a transmitter unit and a receiver unit. In the transmitter unit, the resonator, with the center frequency of about 434 MHz, located in a coupling loop of a broadband amplifier generates a signal, which is sent by an antenna to the receiver unit after amplification by a power amplifier. The receiver unit consists of an antenna, a broadband amplifier and a frequency counter. The developed model can measure temperature in a range of 0 ÷ 100 °C, at a distance of about 30 m, with an accuracy of about ± 0.2 °C.
Źródło:
Materiały Elektroniczne; 2014, T. 42, nr 2, 2; 13-17
0209-0058
Pojawia się w:
Materiały Elektroniczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Free-Volume and Tensile Properties of Glass Fibre Reinforced Polyamide 6 Composites
Autorzy:
Dryzek, E.
Wróbel, M.
Juszyńska-Gałązka, E.
Powiązania:
https://bibliotekanauki.pl/articles/1033894.pdf
Data publikacji:
2017-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
61.41.+e
Opis:
The tensile properties and free volume of commercially available modified polyamid 6 and polyamid 6 composites with 15 and 30 wt% of glass fibre were the subject of the studies. The tensile test allowed us to obtain the stress-strain curves and determine the tensile properties of the polyamid 6 samples. The positron lifetime measurements were performed for the samples before the test and for the samples in the vicinity of the break after they failed. The composites exhibited slightly lower values of the ortho-positronium lifetime and therefore smaller size of the local free volumes in comparison to polyamid 6 without reinforcement. The analysis of the positron lifetime spectra indicated size distribution of the free volume. The initially narrower distributions for the composite samples became broader as a result of the deformation. The deformation caused also increase of the ortho-positronium intensity in the obtained positron lifetime spectra.
Źródło:
Acta Physica Polonica A; 2017, 132, 5; 1501-1505
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie temperatury zabytkowych przedmiotów z wykorzystaniem termografii
Measuring temperature of historical objects by means of thermography
Autorzy:
Wróbel, A.
Greiner-Wrona, E.
Powiązania:
https://bibliotekanauki.pl/articles/130529.pdf
Data publikacji:
2008
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
termografia
temperatura
zabytek
korozja
klimat w muzeum
dziedzictwo kulturowe
thermography
temperature
historical object
corrosion
museum climate
cultural heritage
Opis:
Zabytkowe przedmioty wymagają utrzymania określonej, możliwie stałej temperatury i wilgotności w miejscu ich przechowywania i eksponowania. W tym celu w budynkach muzealnych stosuje się klimatyzację powietrzną lub różne działania pasywne – zacienianie, masywną zabudowę. Celem prezentowanej pracy było badanie temperatury wybranych zabytkowych przedmiotów, eksponowanych w salach muzealnych. Temperatura badanego obiektu zależy nie tylko od temperatury otaczającego powietrza, ale również czynników takich jak: temperatura otaczających ścian, oświetlenie, sposób zabudowy gablot, występowanie różnych źródeł ciepła w pobliżu eksponatów. Dlatego w szczególności zwrócono uwagę na: - równomierność rozkładu temperatury w salach muzealnych w zależności od pór roku i dnia - zależność temperatury okien (i dostarczanego przez nie ciepła) od sposobu ich zasłonięcia - temperaturę eksponatów a ich oświetlenie - wykrywanie i dokumentowanie źródeł ciepła w pobliżu eksponatów Badania przeprowadzono w wybranych salach muzealnych bez klimatyzacji i z klimatyzacja powietrzną. Do badania termiki sal muzealnych wykorzystano technikę termografii. Jej największą zaletą jest uzyskanie wizualnego i dokładnego obrazu rozkładu temperatury na powierzchniach obserwowanych przedmiotów. W wyniku przeprowadzonych badań stwierdzono, że rozkład temperatury w salach muzealnych (również klimatyzowanych) jest nierównomierny i zależy od pory roku i zewnętrznych warunków atmosferycznych. Na powierzchni zabytkowych przedmiotów obserwuje się zróżnicowanie temperatury zależne od sposobu oświetlenia i temperatury otoczenia.
Historical objects are stored and exhibited in specially designed museum buildings. Those buildings are designed and built to provide a climate most appropriate for those objects. Sometimes historical objects are exhibited in historical buildings. As those not always are airconditioned, they can hardly ensure optimal temperature and humidity for the objects. In addition, temperature and humidity are highly dependent on multiple external factors. In museum halls, the natural light is usually limited because of its unfavourable effects on the objects shown and artificial light is used instead. Daily and seasonal changes of temperature, the changing sunlight intensity, and the varying number of visitors make it hard to maintain constant conditions even in air-conditioned halls. Therefore, additional passive operations have to be performed and may include shading of the windows as well as installing additional barriers and constructions. They greatly reduce the load put on the air conditioning system. When measuring temperature of the exhibited objects, it is important that the measurement not be limited to the temperature of the object only. Instead, all the factors that contribute to temperature of a given object should be analysed. These factors include: the temperature of the surrounding air, the temperature of room walls, illumination, construction of the exhibition cabinets, and various heat sources close to the exhibited objects. Thermography can be used for the analysis of exhibition halls. A single major advantage of the technique is that it provides a visual image of temperature distribution on surfaces of objects observed. The paper presents results of a thermographic analysis of exhibition rooms and exhibited historical objects. Several factors were analysed in greater detail: - uniformity of temperature distribution in the exhibition halls in relation to the time of the day and the season of the year; - various methods for shading of the windows and their effect on temperature of the windows (and hence amount of heat transferred); - relationship between illumination of the objects exhibited and their temperature; - detection and documentation of heat sources near the objects exhibited. Experiments and analyses may prove helpful in the selection of optimal methods for stabilizing the microclimate in museum and historical exhibitions.
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2008, 18b; 707-716
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kształtowanie się właściwości chemicznych gleby lekkiej w warunkach wieloletniego nawożenia mineralnego lub organicznego
Formation of chemical properties in light soils under long-term mineral or organic fertilization
Autorzy:
Stanislawska-Glubiak, E.
Wrobel, S.
Powiązania:
https://bibliotekanauki.pl/articles/800775.pdf
Data publikacji:
1999
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Opis:
W wieloletnim doświadczeniu polowym porównywano wpływ różnych systemów nawożenia, tzn. organicznego, mineralnego i organiczno-mineralnego na kształtowanie się chemicznych właściwości gleby płowej. Stwierdzono, że chemiczna degradacja środowiska glebowego zachodzi najszybciej w przypadku wieloletniego stosowania nawozów wyłącznie mineralnych, przy jednoczesnym braku regularnych zabiegów wapnowania gleby. Przejawia się ona głównie w postaci zakwaszenia gleby, tzn. wyraźnego obniżenia się wartości pH, wzrostu kwasowości hydrolitycznej i wymiennej oraz nagromadzenia się glinu ruchomego. W tych warunkach obserwowano niski stopień wysycenia kompleksu sorpcyjnego kationami wapnia i magnezu oraz spadek przyswajalnych dla roślin form magnezu, boru, miedzi i cynku. Najwyższą stabilność badanych cech glebowych stwierdzono w systemie nawożenia wyłącznie organicznego.
The effect of long-term mineral, organic or combined organic-mineral fertilization on formation of chemical properties in lessive soil was investigated. It was stated that exclusive mineral fertilization lack of regular liming led to substantial deterioration of soil's chemical properties. It appears mainly increase of soil acidity i. e. decrease of pH value, rise of hydrolytic and exchangeable acidity as well as mobile aluminium concentration. Under these conditions low level of saturation of absorbing complex with calcium and magnesium cations as well as decline in available forms of magnesium, boron, copper and zinc contents in the soil were observed. The highest stability of the soil features was stated under exclusive organic fertilization system.
Źródło:
Zeszyty Problemowe Postępów Nauk Rolniczych; 1999, 467, 1
0084-5477
Pojawia się w:
Zeszyty Problemowe Postępów Nauk Rolniczych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Positron annihilation studies of high-manganese steel deformed by rolling
Autorzy:
Dryzek, E.
Sarnek, M.
Wróbel, M.
Powiązania:
https://bibliotekanauki.pl/articles/146593.pdf
Data publikacji:
2015
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
plastic deformation
positron annihilation
high-manganese steel
Opis:
Positron annihilation spectroscopy (PAS) has been used to study the annealing behavior of cold rolled Fe – 21 wt% Mn steel with 0.05 wt% C. After the initial annealing of defects shown by Doppler broadening of the annihilation line, a slight increase in the annihilation line shape parameter, i.e., the so-called S parameter and then its decrease in the temperature range between 225◦C and 450◦C indicates generation of new defects and their subsequent annealing. This temperature range coincides with X-ray diffraction measurements, which indicate reversion of deformation-induced ε-martensite. However, for annealing in this temperature range with slow cooling of the sample, the formation of ferrite already starts. The results are compared with our previous results for deformed austenitic stainless steel 1.4301 (EN) where only reversion of deformation-induced α'-martensite was detected.
Źródło:
Nukleonika; 2015, 60, No. 4, part 1; 709-712
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczenie punktów osnowy pomiarowej w procesie aerotriangulacji
Determining survey control points during the process of bundle adjustment
Autorzy:
Pyka, K.
Pastucha, E.
Wróbel, A.
Powiązania:
https://bibliotekanauki.pl/articles/130762.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Geodetów Polskich
Tematy:
aerotriangulacja
punkty wiążące
osnowa pomiarowa
kontur budynku
bundle adjustment
tie points
minor control network
building outline
Opis:
Przedmiotem artykułu jest określenie jaki wpływ na wyniki aerotriangulacji ma wprowadzenie punktów wiążących w postaci narożników dachów lub kalenic. W badaniach wykorzystano blok złożony z 40 zdjęć o GSD=10 cm, który wyrównano w kilku wariantach różniących się doborem punktów wiążących. Uzyskane wyniki dowodzą, że wybór narożników dachów lub kalenic jako punktów wiążących nie obniża dokładności wyrównania. Wniosek jest co prawda neutralny dla samej aerotriangulacji, ale ma ogromne znaczenia praktyczne. Pozwala bowiem uznać narożniki dachów, mierzone podczas aerotriangulacji, jako punkty geodezyjnej osnowy pomiarowej. Konsekwencją takiego założenia jest możliwość odniesienia terenowego pomiaru tachimetrycznego do narożników dachów, co znacznie przyspiesza pomiary konturów budynków.
This paper presents the research on influence of tie points located on corners and ridges of rooftops on the process of bundle adjustment. A set of 40 aerial photographs with 10 cm GSD from ISOK project was used in the research. The bundle adjustment was calculated three times with three different sets of tie points. First one with automatically measured tie points, second with automatic tie points together with manually measured point on rooftops corners and ridges, and third one only with manually collected points on rooftops corners and ridges. Then all different solutions were compared. The results prove that the use of tie points located on corners and ridges of rooftops does not lower the accuracy of bundle adjustment solution, which achieves value about 0.5 pixel. The conclusion might seem to be of low importance from the perspective of process of bundle adjustment, but it has an utmost practical consequence. In accordance with Polish law tie points with coordinates obtained in bundle adjustment process can be used as survey network in land surveying. Typically tie points measurements adopt FBM/ABM matching. In consequence detected tie points are almost impossible to identify in the field. Furthermore automatic measurement of points located on corners and ridges of rooftops is almost an impossibility. Nevertheless, providing tie points measured manually, or collected in automatic or semi-automatic manner with a new different algorithm, could significantly help in land survey. Especially with land survey of building outlines, where measurements could be then easily tied to nearby points.
Źródło:
Archiwum Fotogrametrii, Kartografii i Teledetekcji; 2016, 28; 105-114
2083-2214
2391-9477
Pojawia się w:
Archiwum Fotogrametrii, Kartografii i Teledetekcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Three dimensional image projections and its measurement using the VRML technique
Autorzy:
Wróbel, K.
Porwik, E.
Porwik, P.
Powiązania:
https://bibliotekanauki.pl/articles/333823.pdf
Data publikacji:
2007
Wydawca:
Uniwersytet Śląski. Wydział Informatyki i Nauki o Materiałach. Instytut Informatyki. Zakład Systemów Komputerowych
Tematy:
pomiary medyczne ciała ludzkiego
wizualizacja obrazu 3D
gromadzenie danych tomografii komputerowej
format VRML
human body medical measurements
3D images visualization
CT data acquisition
VRML format
Opis:
Modern digital imaging is used in many areas of human activities. Nowadays, imaging and different human body measurements are also used in medicine, during operation planning by surgeons, dental surgeons, in transplantology, etc. The 3D visualization of human body and some abnormalities of body internal organs can be observed by means of specialized techniques as CT or MRI. During measurements these techniques can present object description by specialized language - VRML (Virtual Reality Modelling Language). Modern VRML browsers offer higher quality visual interfaces for man-computer interaction in real-time environment than ever before. In this paper the simple method of medical images projection and image measurements are presented. Very expensive commercial products can be successfully substituted by means of the computer program proposed in this paper. Proposed approach is based only on VRML and is easy to implement in many programming languages.
Źródło:
Journal of Medical Informatics & Technologies; 2007, 11; 123-133
1642-6037
Pojawia się w:
Journal of Medical Informatics & Technologies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of corrosion wear on the recorded texture of a clad Al-Si coating
Wpływ zużycia korozyjnego na rejestrowaną teksturę platerowanej powłoki Al-Si
Autorzy:
Wróbel, A.
Kulej, E.
Kucharska, B.
Powiązania:
https://bibliotekanauki.pl/articles/352681.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
korozja
tekstura
powłoki
corrosion
coatings
texture
Opis:
An AlSi7,5 clad coating applied one-sided on metal sheet of AlMn1Cu alloy was tested. The coating was made in hot clad rolling process. The coating was subjected to X-ray diffraction measurements paying attention to texturing. Pole figures were recorded for reflections (111), (220), (311) and (331) from the ?Al solid solution. The texture measurements were taken before and after the corrosion test. The coatings were subjected to salt spray corrosion tests (according to the PN-EN-ISO-9227:2007 standard) in three cycles of 6hrs, 12hrs and 18hrs, respectively. Comparison of the state of the surface and the sub-surface structure was also made in macro- and microscopic examinations. It was demonstrated that the corrosion attack had the character of pits and covered only half of the coating. The preferential places of pit initiation were matrix-silicon crystal interfaces. The first corrosion changes occurred after 1 hr of test. After 18 hrs of test, the corrosion attack had encompassed considerable surface areas of the clad coatings. The mass loss of coatings after 18 hrs of test amounted to 0.2%. It was concluded that corrosion has little influence on changing the texture of coatings. Additionally, GIXRD measurements showed change of structure at the layer depth.
Przedmiotem badan przedstawionych w pracy sa powłoki AlSi7,5 jednostronnie platerowane na tasmach AlMn1Cu. Powłoki powstały w procesie walcowania na gorąco. Powłoke poddano rentgenowskim badaniom dyfrakcyjnym pod katem steksturowania, rejestrujac figury biegunowe dla refleksów pochodzacych od płaszczyzn (111), (220), (311) i (331) pochodzace od roztworu stałego Al . Pomiary tekstury wykonano przed i po teście korozyjnym. Powłoki poddano testom korozyjnym w mgle solnej (zgodnie z norma PN-EN-ISO-9227:2007) w trzech cyklach 6h, 12h oraz 18h. Dokonano porównania zuzycia korozyjnego, stanu powierzchni oraz struktury przypowierzchniowej po tescie korozyjnym w badaniach makro i mikroskopowych. Atak korozyjny miał charakter wzerów i obejmował tylko osnowe powłoki. Preferencyjnymi miejscami inicjacji wzerów były granice miedzyfazowe osnowa-kryształy krzemu. Zmiany korozyjne wystapiły po 1 h testu. Po 18 h testu atak korozyjny objał znaczne obszary powierzchni powłok platerowanych. Ubytek masy powłok po 18h testu wyniósł 0,2%. Stwierdzono niewielki wpływ zuzycia powierzchni na teksture powłok, jednoczesnie w pomiarach GIXRD wykazano, zróznicowanie struktury na głebokosci powłoki.
Źródło:
Archives of Metallurgy and Materials; 2011, 56, 4; 897-902
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The biopsychosocial status of women during the antepartum period
Autorzy:
Wróbel, R.
Raba, G.
Kraśnianin, E.
Powiązania:
https://bibliotekanauki.pl/articles/2087792.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Opolski. Instytut Nauk o Zdrowiu
Tematy:
pregnancy
status biopsychosocial
antepartum period
support
anxiety
Opis:
Background: The time leading up to delivery significantly affects the state of a pregnant woman in each of the spheres of human functioning. Aim of the study: The aim of the study was to assess the biopsychosocial status of women in the antepartum period. Material and methods: The study was carried out in St. Queen Jadwiga’s Clinical Regional Hospital No. 2 in Rzeszow. The study group consisted of 200 women awaiting delivery: 100 preparing for physiological delivery, and 100 qualified for elective Caesarean section. The following tools were used: Labor Anxiety Questionnaire, Social Support Scale, Sources of Social Support Questionnaire, Short-form McGill Pain Questionnaire, and the questionnaire developed by the author. Results: Statistical analyses showed a relationship between the biopsychosocial status of pregnant women and the planned mode of delivery. In turn, the sense of availability of social support was influenced by the place of residence and living conditions, the number of people cohabiting with the respondent, and the number of people with whom they maintained contact with during pregnancy. However, the occurrence of somatic complaints was found to be associated with the level of labor anxiety. Conclusion: The biopsychosocial status of women in the antepartum period is influenced by many factors. Proper social relations positively influence psychological well-being, which in turn is closely related to the lack of pain sensations in the biophysical sphere.
Źródło:
Medical Science Pulse; 2020, 14, 3; 41-48
2544-1558
2544-1620
Pojawia się w:
Medical Science Pulse
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the effect of the order of calving, calf sex and milk yield of cows on growth parameters of Limousin calves
Analiza wpływu kolejności wycielenia, płci cielęcia oraz mleczności matek na wyniki produkcyjne cieląt rasy limousine
Autorzy:
Czerniawska-Piatkowska, E.
Wrobel, A.
Cioch, B.
Powiązania:
https://bibliotekanauki.pl/articles/82562.pdf
Data publikacji:
2016
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Źródło:
Folia Pomeranae Universitatis Technologiae Stetinensis. Agricultura, Alimentaria, Piscaria et Zootechnica; 2016, 40, 4(330)
2081-1284
Pojawia się w:
Folia Pomeranae Universitatis Technologiae Stetinensis. Agricultura, Alimentaria, Piscaria et Zootechnica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The position and structure of the nectary in spring heath (Erica carnea L.) flowers
Autorzy:
Weryszko-Chmielewska, E.
Chwil, M.
Wrobel, M.
Powiązania:
https://bibliotekanauki.pl/articles/27074.pdf
Data publikacji:
2009
Wydawca:
Polskie Towarzystwo Botaniczne
Tematy:
position
nectary structure
nectary
Erica carnea
flower
micromorphology
Ericaceae
flower structure
nectar secretion
Opis:
Ecological traits of Erica carnea L. flowers and the morphology of floral nectaries were investigated using stereoscopic, light and scanning electron microscopy. The nectary in the flowers of Erica carnea is located in the basal part of the ovary. It represents the gynoecial nectary type. It has the form of a yellow, ribbed ring with eight outgrowths, pointed towards the base, which alternately adjoin the stamen filaments. The height of the nectary is 400 μm and its thickness 200 – 250 μm. The parenchyma of the nectary is composed of 6 – 8 layers. Nectar secretion occurs through anomocytic stomata with a diameter of 17 μm. Guard cells are only found on the outgrowths of the nectary and they are situated most frequently at the level of other epidermal cells. During nectar secretion, a small degree of pore opening was observed. In the flowers of Erica carnea, secondary nectar presentation was found, with the nectar accumulating at the base of the fused corolla.
Cechy ekologiczne kwiatów Erica carnea L. i morfologię nektarników kwiatowych badano przy użyciu mikroskopii: stereoskopowej, świetlnej i skaningowej elektronowej. Nektarnik w kwiatach Erica carnea położony jest w bazalnej części zalążni. Prezentuje typ genoecial nectary. Ma postać żółtego, żebrowanego pierścienia ze skierowanymi ku nasadzie ośmioma wyrostkami, które międzylegle przylegają do nitek pręcików. Wysokość nektarnika wynosi 400 μm, a miąższość 200 – 250 μm. Parenchyma nektarnika tworzy 6 – 8 warstw. Sekrecja nektaru odbywa się przez anomocytyczne aparaty szparkowe o średnicy 17 μm. Komórki szparkowe występują tylko na wyrostkach nektarnika i są usytuowane najczęściej na poziomie innych komórek epidermy. Podczas sekrecji nektaru obserwowano niewielki stopień rozchylenia szparek. W kwiatach Erica carnea stwierdzono wtórną prezentację nektaru, który gromadził się u nasady zrośniętej korony.
Źródło:
Acta Agrobotanica; 2009, 62, 2
0065-0951
2300-357X
Pojawia się w:
Acta Agrobotanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristic and Application of Knop Fancy Yarns
Charakterystyka i zastosowanie przędz fantazyjnych nopkowych
Autorzy:
Grabowska, K E
Ciesielska-Wróbel, I L
Powiązania:
https://bibliotekanauki.pl/articles/231843.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
knop fancy yarn
mechanical properties
classification
geometric model
production method
przędza nopkowa
przędza fantazyjna
właściwości mechaniczne
model geometryczny
metoda produkcji
Opis:
Apart from the simplest division into continuous and point effects, the classification of fancy yarns does not exist. There is also no published complex guide concerning technological aspects of the production of fancy yarns. The elaboration of such guides could be time consuming and probably they would not fit exactly the requirements of rapidly changing industry and end-user demands. The geometry of the effects could be considered as a classifying factor. Other factors supporting classification are the tensions of component yarns occurring during the twisting process. Thus we can classify knop yarn as a point effect fancy yarn, and according to the tension changes we rank knop yarn as a subgroup of bunch yarns. In the knop yarn group, the component yarns change their functions during the twisting process – periodically one of them is the core yarn and next it changes the function to become an effect yarn. In this way one may obtain fancy colour effects. The properties of this type of yarn were investigated focussing on changing the twist and frequency of occurring effects using multiple regressions. The most useful seems to prediction of the impact of the knop yarn type of aesthetic of fabrics and their mechanical parameters.
Geometrię efektόw punktowych przyjęto jako kryterium klasyfikacji przędz. Inny czynnik wspierający tę klasyfikację to naprężenie komponentόw przędz fantazyjnych występujące podczas procesu skręcania tych komponentόw. W konsekwencji, można zaklasyfikować przędzę nopkową jako przędzę fantazyjną z efektami okresowymi a posługując się kryterium naprężenia komponentόw przędzy, klasyfikujemy tę przędzę jako podgrupę przędzy pęczkowej. W przędzy pęczkowej, jej elementy składowe zmieniają swe funkcje podczas procesu skręcania w taki sposόb, że element będący rdzeniem przędzy staje się elementem zdobniczym. W ten sposόb można otrzymywać przędze kolorowe. Własności takich przędz zostały przebadane, ze szczegόlnym uwzględnienien zmiany liczby skrętόw przędzy i częstotliwości pojawiających się efektόw przy wykorzystaniu regresji wielowymiarowej. Najbardziej przydatne w tego typu analizie jest ocena wpływu rodzaju przędzy pęczkowej na właściwości estetyczne i parametry mechaniczne tkanin wyprodukowanych z tych przędz.
Źródło:
Fibres & Textiles in Eastern Europe; 2015, 1 (109); 17-25
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improving the carbon dioxide uptake efficiency of activated carbons using a secondary activation with potassium hydroxide
Autorzy:
Zgrzebnicki, M.
Michalczyszyn, E.
Wrobel, R. J.
Powiązania:
https://bibliotekanauki.pl/articles/778515.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
activated carbon
activation
pore size distribution
DFT
Opis:
Secondary activation of commercial activated carbon (AC) ORGANOSORB 10-CO was carried out at 600, 700 and 800°C with mass ratios of potassium to AC (K/AC) in range 1–3. Crucial samples have shown following CO2  uptakes and SSA – 3.90 mmol/g and 1225 m2/g, 4.54 mmol/g and 1546 m2/g, 4.28 and 1717 m2/g for pristine material and samples obtained at 700°C with K/AC = 2 and at 800°C with K/AC = 3 respectively. Last sample also indicated significant mesopore volume increase in diameter range 2–5 nm, from 0.11 to 0.24 cm3/g. CO2 uptake increase was explained by formation of micropores up to diameter of 0.8 nm, which distribution was established from CO2  sorption using DFT. Surface chemistry of all samples has not changed during modification, what was proven by XPS. Moreover, deeper incorporation of potassium ions into graphite at higher temperatures was observed as confirmed with EDS, XPS and XRD.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 3; 87-94
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Cadmium on Physiological Parameters of Clone Jorr of Basket Willow (Salix viminalis L) from Aquatic Cultures
Wpływ kadmu na parametry fizjologiczne klonu Jorr wierzby wiciowej (Salix viminalis L) z kultur wodnych
Autorzy:
Malinowska, K.
Mikiciuk, M.
Wróbel, J.
Czeżyk, E.
Powiązania:
https://bibliotekanauki.pl/articles/389622.pdf
Data publikacji:
2011
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
Salix viminalis
kadm
asymilacja CO2
transpiracja
barwniki asymilacyjne
bilans wodny
cadmium
CO2 assimilation
transpiration
assimilation dyes
water balance
Opis:
In the experiment the effect of differentiated doses of cadmium (0; 1.4; 28; 280 mg dm–3), applied in the form of CdCl2 on selected physiological parameters of clone Jorr Salix viminalis, cultivated in water cultures with Hoagland’s medium was determined. The statistical analysis of the results showed a significant influence of cadmium on the examined physiological parameters of clone Jorr. The addition of CdCl2 to the medium in a dose of 280 mg dm–3 caused a decrease in intensity of CO2 assimilation of the examined clone by 70 % and transpiration by nearly 83 % in relation to the intensity of these processes in control leaves. A positive significant correlation between assimilation of CO2 and transpiration was recorded. At all the dates of studies decreased contents of both chlorophyll and carotenoids in leaves were obtained after the application of three doses of cadmium chloride. The increase in the concentration of cadmium salt caused a decrease in the relative water content index (RWC) and an increase in the water saturation deficit (WSD) in the leaves of clone Jorr.
W przeprowadzonym doświadczeniu określano wpływ zróżnicowanych dawek kadmu (0; 1,4; 28; 280 mg dm-3), zastosowanych w formie CdCl2 na wybrane parametry fizjologiczne klonu Jorr Salix viminalis L., uprawianej w kulturach wodnych z pożywką Hoaglanda. Analiza statystyczna wyników wykazała istotny wpływ kadmu na badane parametry fizjologiczne klonu Jorr. Dodatek do pożywki CdCl2 w dawce 280 mg dm-3 spowodował obniżenie intensywności asymilacji CO2 badanego klonu o 70 %, a transpiracji o prawie 83 % w stosunku do intensywności tych procesów w liściach kontrolnych. Stwierdzono statystycznie istotną dodatnią korelację między asymilacją CO2 a transpiracją. We wszystkich terminach badań uzyskano obniżone zawartości zarówno chlorofilu, jak i karotenoidów w liściach po zastosowaniu trzech dawek chlorku kadmu. Wzrost stężenia soli kadmu spowodował spadek wskaźnika względnej zawartości wody (RWC) oraz wzrost deficytu wysycenia wodą (WSD) w liściach klonu Jorr.
Źródło:
Ecological Chemistry and Engineering. A; 2011, 18, 5-6; 763-770
1898-6188
2084-4530
Pojawia się w:
Ecological Chemistry and Engineering. A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On the limits of quotients of polynomials in two variables
Autorzy:
Wituła, R.
Hetmaniok, E.
Wróbel, A.
Matlak, J.
Powiązania:
https://bibliotekanauki.pl/articles/122528.pdf
Data publikacji:
2015
Wydawca:
Politechnika Częstochowska. Wydawnictwo Politechniki Częstochowskiej
Tematy:
Cauchy polynomials
Ma polynomials
Ferrers-Jackson polynomials
limits of quotients of multivariable polynomials
Opis:
The aim of this paper is to discuss different types of decompositions and factorizations concerning a few families of symmetric polynomials in two variables including Ma polynomials, classic Cauchy polynomials, Ferrers-Jackson polynomials and some elementary polynomials as well. Application of the discussed decompositions and factorizations for determining the limits of quotients of the respective polynomials in two variables is presented here and some general theorems on these limits are also proven in this elaboration.
Źródło:
Journal of Applied Mathematics and Computational Mechanics; 2015, 14, 1; 121-132
2299-9965
Pojawia się w:
Journal of Applied Mathematics and Computational Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the homotopy perturbation method for the systems of Fredholm integral equations
Zastosowanie homotopijnej metody perturbacyjnej do układów równań całkowych typu Fredholma
Autorzy:
Hetmaniok, E.
Słota, D.
Wróbel, A.
Zielonka, A.
Powiązania:
https://bibliotekanauki.pl/articles/87304.pdf
Data publikacji:
2015
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
homotopijna metoda perturbacyjna
konwergencja
szacowanie błędu
równanie całkowe
homotopy perturbation method
convergence
error estimation
integral equation
Opis:
In this paper the convergence of homotopy perturbation method for the systems of Fredholm integral equations of the second kind is proved. Estimation of errors of approximate solutions obtained by taking the partial sum of the series is also elaborated in the paper.
W artykule wykazano zbieżność homotopijnej metody perturbacyjnej dla układów równań całkowych Fredholma drugiego rodzaju. Podano także oszacowanie błędu rozwiązania przybliżonego uzyskanego jako suma częściowa tworzonego w metodzie szeregu.
Źródło:
Zeszyty Naukowe. Matematyka Stosowana / Politechnika Śląska; 2015, 5; 61-70
2084-073X
Pojawia się w:
Zeszyty Naukowe. Matematyka Stosowana / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the homotopy perturbation method for the systems of Volterra integral equations
Zastosowanie homotopijnej metody perturbacyjnej do układów równań całkowych typu Volterry
Autorzy:
Hetmaniok, E.
Słota, D.
Wróbel, A.
Zielonka, A.
Powiązania:
https://bibliotekanauki.pl/articles/87306.pdf
Data publikacji:
2015
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
homotopijna metoda perturbacyjna
konwergencja
szacowanie błędu
równanie całkowe
homotopy perturbation method
convergence
error estimation
integral equation
Opis:
In this paper the convergence of homotopy perturbation method for the systems of Volterra integral equations of the second kind is proved. Estimation of errors of approximate solutions obtained by taking the partial sum of the series is also elaborated in the paper.
W artykule wykazano zbieżność homotopijnej metody perturbacyjnej dla układów równań całkowych Volterry drugiego rodzaju. Podano także oszacowanie błędu rozwiązania przybliżonego uzyskanego jako suma częściowa tworzonego w metodzie szeregu.
Źródło:
Zeszyty Naukowe. Matematyka Stosowana / Politechnika Śląska; 2015, 5; 71-77
2084-073X
Pojawia się w:
Zeszyty Naukowe. Matematyka Stosowana / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies on the management of textile floor covering waste
Badania nad zagospodarowaniem odpadów włókienniczych pokryć podłogowych
Autorzy:
Cieślak, M.
Schmidt, H.
Gromadzińska, E.
Wróbel, S.
Powiązania:
https://bibliotekanauki.pl/articles/258278.pdf
Data publikacji:
2006
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
włókiennicze pokrycie podłogowe
WPP
odpady
recykling
textile floor covering
TFC
waste
recycling
Opis:
Textile floor covering waste (TFC) is a complex material, and, to a great extent, non-degradable: therefore, it should not be disposed in landfill sites. The paper discusses some developments connected with the management of this type of waste implemented in the USA, the EU countries and also describes the current situation in Poland. Mechanical recycling of various types of TFC, including the segregation and disintegration of waste has been investigated and the screen analysis of the recycled products has been carried out.
Odpady włókienniczych pokryć podłogowych (WPP) są materiałami złożonymi i w zdecydowanej większości trudno degradowalnymi, nie powinny więc trafiać na składowiska. W artykule przedstawiono rozwiązania związane z ich zagospodarowaniem, stosowane w Stanach Zjednoczonych, krajach Unii Europejskiej oraz aktualną sytuację w kraju. Przeprowadzono badania mechanicznego recyklingu różnych rodzajów WPP, obejmujące segregację i rozdrobnienie opadów oraz analizę sitową uzyskanych recyklatów.
Źródło:
Problemy Eksploatacji; 2006, 2; 181-191
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System monitorowania drgań gruntu wywołanych silnymi wstrząsami na powierzchni obszaru górniczego O/ZG Rudna
Surface seismic monitoring system in the Rudna mining area in the aspects of recorded high-energy mining tremors
Autorzy:
Koziarz, E.
Wróbel, J.
Anderko, A.
Mirek, A.
Powiązania:
https://bibliotekanauki.pl/articles/166279.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
sejsmologia górnicza
oddziaływanie wstrząsów na powierzchnię
monitoring sejsmiczny
mining seismology
impact of mining tremors on the surface
seismic monitoring
Opis:
W referacie przedstawiono aktualną bazę pomiarową oraz wyniki rejestracji oddziaływania wstrząsów na powierzchnię terenu górniczego O/ZG Rudna w latach 2013-2014. Stwierdzono, że maksymalne amplitudy rejestrowanych przyspieszeń drgań osiągają duże wartości, przekraczające 2000 mm/s2. Drgania te nie powodują trwałych uszkodzeń budynków oraz Obiektu Unieszkodliwiania Odpadów Wydobywczych „Żelazny Most”.
This paper presents the current surface measurement base and the results of the recordings of the impact of tremors on the surface mining area Rudna in 2013-2014. It was found that the maximum amplitude of the recorded acceleration achieves high values of 2000 mm/s2 and more. These vibrations do not cause permanent damage to the buildings and the impacts on mining waste treatment facility „Iron Bridge”.
Źródło:
Przegląd Górniczy; 2015, 71, 10; 17-24
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hybrid verification method based on finger-knuckle analysis and keystroke dynamics
Autorzy:
Wesolowski, T. E.
Safaverdi, H.
Doroz, R.
Wrobel, K.
Powiązania:
https://bibliotekanauki.pl/articles/333719.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Śląski. Wydział Informatyki i Nauki o Materiałach. Instytut Informatyki. Zakład Systemów Komputerowych
Tematy:
user verification
keystroke dynamics
finger-knuckle analysis
weryfikacja użytkownika
dynamika pisania na klawiaturze
analiza palców
Opis:
The increasing number of personal data leaks becomes one of the most important security issues hence the need to develop modern computer user verification methods. In the article, a potential of biometric methods fusion for continuous user verification was assessed. A hybrid approach for user verification based on fusion of keystroke dynamics and knuckle images analysis was presented. Verification is performed by a classification module where an ensemble classifier was used to verify the identity of a user. A proposed classifier works on a database which comprises of knuckle images and keyboard events for keystroke dynamics. The proposed approach was tested experimentally. The obtained results confirm that the proposed hybrid approach performs better than methods based on single biometric feature hence the introduced method can be used for increasing a protection level of computer resources against forgers and impostors. The paper presents results of preliminary research conducted to assess the potential of biometric methods fusion.
Źródło:
Journal of Medical Informatics & Technologies; 2017, 26; 26-36
1642-6037
Pojawia się w:
Journal of Medical Informatics & Technologies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Hardening in Alloys and Composites and Its Examination with a Diffraction and Self-Consistent Model
Autorzy:
Gadalińska, E.
Baczmański, A.
Wroński, S.
Wróbel, M.
Scheffzük, C.
Powiązania:
https://bibliotekanauki.pl/articles/97949.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
metal-matrix composites
MMCs
hardening
micromechanics
neutron diffraction
Opis:
The paper presents the results of diffraction stress measurement in Al/SiC composite and in 2124T6 aluminum alloy during the in situ tensile test. The main aim of the work is to observe the stress values for different stages of tensile test for the composite after applying two types of thermal treatment and for the alloy used as a matrix in this composite, to identify the type of hardening process. The experimental results were compared against the calculations results obtained from the self-consistent model developed by Baczmański [1] - [3] to gain the information about the micromechanical properties (critical resolved shear stress τcr and hardening parameter H) of the examined materials. This comparison allowed researchers to determine the role of reinforcement in the composite as well as the impact of the heat treatment on the hardening of the material.
Źródło:
Fatigue of Aircraft Structures; 2018, 10; 31-46
2081-7738
2300-7591
Pojawia się w:
Fatigue of Aircraft Structures
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Steam Reforming Catalyst Geometry on the Performance of Tubular Reformer – Simulation Calculations
Autorzy:
Franczyk, E.
Gołębiowski, A.
Borowiecki, T.
Kowalik, P.
Wróbel, W.
Powiązania:
https://bibliotekanauki.pl/articles/184862.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tubular steam reforming
nickel catalyst geometry
process simulation
catalyst coking
process intensification
symulacja procesu
katalizator koksujący
intensyfikacja
Opis:
A proper selection of steam reforming catalyst geometry has a direct effect on the efficiency and economy of hydrogen production from natural gas and is a very important technological and engineering issue in terms of process optimisation. This paper determines the influence of widely used seven-hole grain diameter (ranging from 11 to 21 mm), h/d (height/diameter) ratio of catalyst grain and Sh/St (hole surface/total cylinder surface in cross-section) ratio (ranging from 0.13 to 0.37) on the gas load of catalyst bed, gas flow resistance, maximum wall temperature and the risk of catalyst coking. Calculations were based on the one-dimensional pseudo-homogeneous model of a steam reforming tubular reactor, with catalyst parameters derived from our investigations. The process analysis shows that it is advantageous, along the whole reformer tube length, to apply catalyst forms of h/d = 1 ratio, relatively large dimensions, possibly high bed porosity and Sh/St ≈ 0.30-0.37 ratio. It enables a considerable process intensification and the processing of more natural gas at the same flow resistance, despite lower bed activity, without catalyst coking risk. Alternatively, plant pressure drop can be reduced maintaining the same gas load, which translates directly into diminishing the operating costs as a result of lowering power consumption for gas compression.
Źródło:
Chemical and Process Engineering; 2015, 36, 2; 239-250
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Women’s expectations and preferences for care of the newborn in the immediate postpartum period
Autorzy:
Kremska, A.
Zych, B.
Wróbel, R.
Kraśnianin, E.
Jeżowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/2087970.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Opolski. Instytut Nauk o Zdrowiu
Tematy:
perinatal care
expectations
midwife
standard
Opis:
Background: The Regulation of the Minister of Health issued on 16th August 2018 addressed the matter of the organizational standard of perinatal care which determines guidelines concerning care of the newborn baby, in which skin-to-skin contact and early breastfeeding are important. Aim of the study: The aim of this study is to explore women’s preferences concerning care of the newborn in the immediate postpartum period. Material and methods: 130 patients attending the Pro-Familia specialist hospital in Rzeszow participated in this research. The cohort consisted of pregnant women who had attended the doctor supervising their pregnancy before delivery. The research was carried out from March to April 2013 and the data collected was statistically analyzed, assuming a significance level of p<0.05. Results: Pregnant women most often expressed a preference of an accompanying person to cut the newborn’s umbilical cord (59.2%), with 23.1% preferring a member of the medical team to do so. The majority (89.2%) of pregnant women wanted their baby to be laid on their stomach immediately following delivery to ensure skin-to-skin contact. In terms of Apgar scoring, 69.2% of women expected information about the Apgar score of their newborn immediately after delivery. Most women (60%) wished their newborn to be given routine vaccinations for hepatitis B and tuberculosis (BCG). Patients most often declare that they want to breastfeed exclusively (77.7%), with 29.2% of women expressing a wish to obtain more information about breastfeeding and 31.5% wishing to consult with a lactation specialist. Conclusions: Pregnant women expect skin-to-skin contact immediately after delivery, the umbilical cord to be cut by an accompanying person and would like to be told their newborn’s Apgar score. The women studied prefer exclusively breastfeeding, and express a wish to obtain information regarding lactation, and expect to be able to consult with a lactation specialist.
Źródło:
Medical Science Pulse; 2020, 14, 2; 30-35
2544-1558
2544-1620
Pojawia się w:
Medical Science Pulse
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of N-(p-ethoxycarbonylphenylmethyl) -p-isopropoxyphenylsuccinimide on the anticonvulsant action of four classical antiepileptic drugs in the mouse maximal electroshock-induced seizure model
Autorzy:
Łuszczki, J.J.
Marzeda, E.
Kondrat-Wrobel, M.W.
Wrobel, J.
Kocharov, S.L.
Florek-Luszczki, M.
Powiązania:
https://bibliotekanauki.pl/articles/3266.pdf
Data publikacji:
2014
Wydawca:
Instytut Medycyny Wsi
Tematy:
N-(p-ethoxycarbonylphenylmethyl) -p-isopropoxyphenylsuccinimide
anticonvulsant action
antiepileptic drug
mice
mouse
electroshock-induced seizure model
seizure
Źródło:
Journal of Pre-Clinical and Clinical Research; 2014, 08, 1
1898-2395
Pojawia się w:
Journal of Pre-Clinical and Clinical Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Some aspects of symplasmic communication during somatic embryogenesis of tree fern Cyathea delgadii
Autorzy:
Wrobel-Marek, J.
Grzyb, M.
Kurczynska, E.
Rybczynski, J.
Mikula, A.
Powiązania:
https://bibliotekanauki.pl/articles/951252.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
somatic embryogenesis
symplasmic communication
tree fern
Cyathea delgadii
plant propagation
sexual reproduction
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2015, 96, 1
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of parents’ satisfaction with caring for children hospitalized in a pediatric ward – part 1
Autorzy:
Kremska, A.
Kołodziej, B.
Wróbel, R.
Kraśnianin, E.
Zych, B.
Ignac, K.
Powiązania:
https://bibliotekanauki.pl/articles/2087605.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Opolski. Instytut Nauk o Zdrowiu
Tematy:
personal satisfaction
parents
delivery of health care
patient care management
Opis:
Background: The quality of medical services offered is a factor that strongly determines patient satisfaction. Aim of the study: The aim of the study was to evaluate parent’s satisfaction with the care and conditions experienced during their child’s stay in a Pediatric Ward. Material and methods: The study involved 293 parents from two pediatric wards of the Clinical Provincial Hospital No. 2 in Rzeszow. The PASAT PEDIATRIA package was used as a research tool. Results: The functioning of the admission room was good. Parents of children on the Pediatric Ward ranked medical and nursing friendliness the highest (mean = 4.34 and 4.37, respectively), followed by the availability of doctors (mean = 3.97) and the amount of time they devoted to the patient’s family (mean = 3.97). Respondents assessed the ward best in terms of the cleanliness of the room (mean = 4.12) and the possibility of spending free time in an interesting way (mean = 4.07). Conclusions: Parents of children hospitalized in the Pediatric Ward were slightly more satisfied with nursing than medical care. Doctors should make every effort to improve the availability and amount of time devoted to the child’s family. The overall assessment of the conditions in the ward was “fairly good”, indicating the need for monitoring and improvement.
Źródło:
Medical Science Pulse; 2020, 14, 4; 18-24
2544-1558
2544-1620
Pojawia się w:
Medical Science Pulse
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Alantolactone and isoalantolactone suppress maximal electroshock-induced tonic seizures in mice
Autorzy:
Luszczki, J.J.
Marzeda, E.
Kondrat-Wrobel, M.W.
Florek-Luszczki, M.
Powiązania:
https://bibliotekanauki.pl/articles/3044.pdf
Data publikacji:
2014
Wydawca:
Instytut Medycyny Wsi
Tematy:
alantolactone
isoalantolactone
electroshock-induced tonic seizure
seizure
mice
mouse
treatment
Źródło:
Journal of Pre-Clinical and Clinical Research; 2014, 08, 1
1898-2395
Pojawia się w:
Journal of Pre-Clinical and Clinical Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Using LCA method to describe logistic system of fuel
Autorzy:
Haller, P.
Jankowski, A.
Jaworska, E.
Kardasz, P.
Markowska, K.
Wróbel, R.
Powiązania:
https://bibliotekanauki.pl/articles/245154.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
logistic system
LCA method
fuel efficiency
life cycle
Opis:
This paper presents the life cycle of the fuel with the use of LCA. This method is taken from the management theory allows to describe and predict the impact of production processes, transport and use of fuels on the environment. The aim of the study is to compare the energy consumption of the test fuels (diesel, a blend of rapeseed oil and butyl alcohol) in the process of their production. The results indicate that most energy is consumed during the processing of crude oil. This process produced a large quantity of sulphur oxides. Very energy intensive (53,859 GJ per 10 k litres of fuel produced) part of the production is rape culture. This is due to the long working hours of agricultural tractors and combines. In this process, are secreted large amounts of exhaust gas: CO (2.664 kg), NOx (23.31 kg). Inter alia, environmental life cycle assessment, schematic structure of the LCA, the energy balance of the life cycle of diesel oil, the energy balance of the life cycle of rape oil mixed with butyl alcohol, the balance of raw material sourcing, the balance of the materials necessary to production of a mixture of rape oil and butanol alcohol are presented in the paper.
Źródło:
Journal of KONES; 2015, 22, 3; 293-299
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of Ballistic Transport in Wires of n-PbTe
Autorzy:
Grabecki, G.
Wróbel, J.
Dietl, T.
Papis, E.
Kamińska, E.
Piotrowska, A.
Ueta, Y.
Sprinholtz, G.
Bauer, G.
Powiązania:
https://bibliotekanauki.pl/articles/1968110.pdf
Data publikacji:
1997-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.61.-r
73.23.Ad
73.50.Dn
Opis:
We present results of magnetotransport studies on quantum wires of submicron PbTe epilayers, fabricated by means of electron beam lithography and dry etching. When the wire width is reduced down to 1 μm, the transition from diffusive to ballistic regime is observed. Effects associated with collimation and boundary scattering are found in the Hall, longitudinal, and van der Pauw magnetoresistance for wires and junctions in the shape of a cross.
Źródło:
Acta Physica Polonica A; 1997, 92, 4; 789-792
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quality of life among patients from urban and rural areas with advanced age-related macular degeneration assessed using the NEI-VFQ-25
Autorzy:
Święch, A.
Dolar-Szczasny, J.
Wróbel-Dudzińska, D.
Kosior-Jarecka, E.
Mackiewicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/28762776.pdf
Data publikacji:
2021
Wydawca:
Instytut Medycyny Wsi
Źródło:
Annals of Agricultural and Environmental Medicine; 2021, 28, 2; 243-249
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka wybranych elementów środowiska przyrodniczego wyspy Chełminek. Część 2. Aktualny stan i wartość przyrodnicza szaty roślinnej wyspy Chełminek
Characteristics of selected components the natural environment of the Chełminek island. Part 2. Current status and the natural value of vegetation cover of the Chełminek island
Autorzy:
Kowalski, W.W.A.
Banas-Stankiewicz, U.
Wrobel, M.
Malinowski, R.
Niedzwiecki, E.
Powiązania:
https://bibliotekanauki.pl/articles/82536.pdf
Data publikacji:
2013
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Źródło:
Folia Pomeranae Universitatis Technologiae Stetinensis. Agricultura, Alimentaria, Piscaria et Zootechnica; 2013, 28
2081-1284
Pojawia się w:
Folia Pomeranae Universitatis Technologiae Stetinensis. Agricultura, Alimentaria, Piscaria et Zootechnica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Lęk przed porodem w III trymestrze ciąży i jego powiązania ze stanem noworodka
Fear of childbirth in the third trimester of pregnancy and its correlation with the condition of neonate
Autorzy:
Gebuza, G.
Kazmierczak, M.
Gierszewska, M.
Mieczkowska, E.
Banaszkiewicz, M.
Wrobel-Bania, A.
Powiązania:
https://bibliotekanauki.pl/articles/3897.pdf
Data publikacji:
2015
Wydawca:
Instytut Medycyny Wsi
Opis:
Wstęp. Wiele badań na świecie sugeruje powiązanie prenatalnego niepokoju i nieprawidłowego przebiegu ciąży ze stanem zdrowia noworodka. Skutecznym predyktorem dobrostanu kobiet ciężarnych i noworodków może być wsparcie społeczne od bliskich osób. Cel. Ocena lęku przed porodem i jego związek ze stanem zdrowia noworodka w skali Apgar, masą ciała i nieprawidłowościami pępowiny oraz określenie predyktorów dobrostanu kobiet. Materiał i metody. Badania przeprowadzono w III trymestrze ciąży u 199 kobiet. Lęk przed porodem mierzono Kwestionariuszem Lęku Porodowego (KLPII). Wykorzystano również Berlińskie Skale Wsparcia Społecznego (BSSS) oraz Skalę Satysfakcji z Życia (SWLS). Po porodzie zebrano dane dotyczące oceny noworodków w skali Apgar, masę ciała noworodków i wystąpienie powikłań pępowinowych podczas porodu. Wyniki. Nie stwierdzono różnicy w poziomie lęku przed porodem u matek ze względu na niską wagę ciała noworodków, niską punktację w skali Apgar i powikłania pępowiny. Satysfakcja z życia jest związana z otrzymanym wsparciem społecznym. Wraz ze wzrostem ryzyka ciąży wzrasta poziom otrzymanego przez kobiety wsparcia społecznego. Wnioski. Lęk przed porodem u kobiet w III trymestrze ciąży nie jest związany ze złym stanem noworodka. Należy prowadzić dalsze badania oceniające związek lęku przed porodem ze stanem zdrowia noworodka.
Background. Many studies worldwide have suggested the existence of a relationship between prenatal anxiety and abnormal course of pregnancy, and the health status of the neonate. Social support received from close friends and relatives may constitute an effective predictor of the welfare of pregnant women and newborns. Objectives. The aim of the present study was to assess the level of childbirth fear and its correlation with neonatal health status evaluated using the Apgar scale, neonatal body mass and umbilical cord complications, as well as to determine the predictors of women’s welfare. Methods. The study included 199 women in the third trimester of pregnancy. The fear of childbirth was measured using the Fear of Childbirth Questionnaire (KLP II). The Berlin Social Support Scales (BSSS) and the Satisfaction with Life Scale (SWLS) were also applied. After parturition, data concerning neonatal assessment in the Apgar scale, neonatal body mass and umbilical cord complications during delivery were collected. Results. No differences were found in the level of childbirth fear in mothers with regard to low neonatal body weight, low scores in the Apgar scale and umbilical cord complications. Satisfaction with life correlates with received social support. The level of social support received by women increases along with an increase in pregnancy risk. Conclusions. The fear of childbirth in women in the third trimester of pregnancy does not correlate with poor health status of the neonate. Further research should be carried out in order to determine correlations between the fear of childbirth and the health status of the neonate.
Źródło:
Medycyna Ogólna i Nauki o Zdrowiu; 2015, 21(50), 1
2083-4543
Pojawia się w:
Medycyna Ogólna i Nauki o Zdrowiu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Low Temperature Processing of Nanostructures Based on II-VI Semiconductors Quantum Wells
Autorzy:
Majewicz, M.
Śnieżek, D.
Wojciechowski, T.
Baran, E.
Nowicki, P.
Wojtowicz, T.
Wróbel, J.
Powiązania:
https://bibliotekanauki.pl/articles/1376129.pdf
Data publikacji:
2014-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.61.Ga
73.63.Hs
68.37.Hk
62.23.St
Opis:
We report the first results of electron beam lithography processes performed on polymethyl methacrylate (PMMA) and hydrogen silsesquioxane (HSQ) resists, which have been pre-backed in vacuum at T ≤ 90°C. For such low temperature processing the lithographical resolution is reduced as compared to standard procedures, however, the exposure contrast and adhesion to CdTe and HgTe substrates have been sufficient for the fabrication of sub-μ m quantum devices. Furthermore, the new method of electrical microcontact forming is proposed, based on the local melting and annealing of an indium metal layer, performed with the application of accelerated electron beam. The method has been tested for CdTe/CdMgTe quantum wells using the lithography techniques, the exposure parameters have been optimized by inspecting the morphology of annealed metal film via the in situ imaging.
Źródło:
Acta Physica Polonica A; 2014, 126, 5; 1174-1176
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Toxicity of parasites and their unconventional use in medicine
Autorzy:
Król, G.
Tomaszewska, A.
Wróbel, G.
Paprocka, P.
Durnaś, B.
Piktel, E.
Bucki, R.
Powiązania:
https://bibliotekanauki.pl/articles/2085134.pdf
Data publikacji:
2019
Wydawca:
Instytut Medycyny Wsi
Tematy:
parasites
toxicity
helminth therapy
Opis:
Introduction. Over 300 species of parasites can possibly be passed on humans. Most of the parasitic infections are defined based on their pathogenicity; however, some positive effects of a parasite existence within the human body have recently been suggested. Beneficial outcomes of parasite infections might result from the production and release of metabolites, modification of host immune response or products uptake of the host. Objective. The aim of the study was a comprehensive analysis of a wide range of effects of parasites on the human body, including an overview of the toxic and positive effects. State of knowledge. In the light of the latest research presenting the unconventional use of parasites in medicine, the widely understood of their impact on the human body can also be considered in a positive context. Clinical cases from diseases caused by the toxic effects of parasites, as described in recent years, indicate that the problem of parasitic infections still persists. Despite a great deal of knowledge about the toxic effects of parasites on the human organism and, above all, despite the improvement in sanitary conditions, there is a resurgence of parasitic infections, as evidenced, e.g. by the examples presented in this review. Conclusions. The examples of positive effects of parasites presented so far give hope for the future in terms of fighting many diseases for which pharmacological treatment has not yet brought a positive effect. A better understanding of those processes might lead to the development of new methods of unconventional medical treatment.
Źródło:
Annals of Agricultural and Environmental Medicine; 2019, 26, 4; 523-531
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies of New Antiferroelectric Liquid Crystal Based on Quantum-Chemical Model
Autorzy:
Tomczyk, W.
Marzec, M.
Juszyńska, E.
Dąbrowski, R.
Ziobro, D.
Wróbel, S.
Massalska-Arodź, M.
Powiązania:
https://bibliotekanauki.pl/articles/1399016.pdf
Data publikacji:
2013-12
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
77.84.Nh
64.70.M-
Opis:
Physical properties of new thermotropic antiferroelectric liquid crystal have been studied. Experiments were done by use of complementary methods such as differential scanning calorimetry, polarizing optical microscopy and X-ray powder diffractometry. Acquired data from X-ray powder diffractometry was examined under application of quantum chemical approach. It has been found that compound studied exhibits stable enantiotropic antiferroelectric SmC_{A}* phase in the wide temperature range while ferroelectric phase SmC* is very narrow.
Źródło:
Acta Physica Polonica A; 2013, 124, 6; 949-953
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prevalence of insomnia and depression in patients with age-related macular degeneration
Bezsenność i zachowania depresyjne u pacjentów ze zwyrodnieniem plamki żółtej związanym z wiekim
Autorzy:
Nowak, E.
Kulik, A.
Wrobel, J.
Nowak, G.
Nowak, D.
Roczniak, W.
Josko-Ochojska, J.
Powiązania:
https://bibliotekanauki.pl/articles/2053002.pdf
Data publikacji:
2018
Wydawca:
Akademia Bialska Nauk Stosowanych im. Jana Pawła II w Białej Podlaskiej
Tematy:
age related macular degeneration
AMD
insomnia
depression
zwyrodnienie plamki żółtej związane z wiekiem
bezsenność
depresja
Opis:
Background. Age Related Macular Degeneration (AMD) affecting the organ of vision, impairs central vision. The study objective was (1) to define the prevalence of sleep disorders and depressive symptoms in patients with AMD, (2) to assess the relationship of depressive symptoms and insomnia with chosen demographic data, (3) to assess a potential correlation of the exacerbating vision quality with depressive symptoms and sleep disorders. Material and methods. The study involved 105 patients, women and men aged 45-88. Patients were asked to complete an original questionnaire subjected to validation, the Beck Depression Inventory and the Athens’s Insomnia Scale. Results. The results were analysed statistically, showing that 71% of the respondents had insomnia and 70% suffered from depression. The patients’ age, time from the diagnosis, marital and occupational status were not found to be related to depression or sleep disorders. Type of education, financial status and family support were significantly correlated with the prevalence of depression and sleep disorders. No correlation was observed between the exacerbation of vision disorders and enhanced depressive symptoms and insomnia. However, such correlation was noted with subjective stress reactions. Conclusions. Since patients with AMD are at a greater risk of sleep disorders and depression they should remain under professional care of a multidisciplinary team, including an ophthalmologist, a family doctor, a psychiatrist and a psychologist.
Wprowadzenie. Zwyrodnienie plamki żółtej związane z wiekiem (AMD, Age Related Macular Degeneration) jest schorzeniem narządu wzroku, które istotnie upośledza widzenie centralne. Celem badania było: (1) określenie częstości występowania zaburzeń snu oraz objawów depresyjnych u pacjentów z AMD, (2) zbadanie zależności pomiędzy objawami depresyjnymi i bezsennością a wybranymi danymi demograficznymi, (3) oszacowanie korelacji pomiędzy pogarszaniem się jakości widzenia a objawami depresyjnymi i zaburzeniami snu. Materiał i metody. W badaniu wzięło udział 105 pacjentów, kobiet i mężczyzn w wieku od 45 do 88 lat. Pacjenci poproszeni zostali o wypełnienie autorskiej zwalidowanej ankiety , skali depresji Becka oraz Ateńskiej Skali Bezsenności. Wyniki. Stwierdzono, że na bezsenność cierpi 71% respondentów, natomiast objawy depresji występują u 70% badanych. Wiek badanych, czas od postawienia diagnozy, stan cywilny oraz status zawodowy nie były związane z zaburzeniami depresyjnymi oraz snu. Rodzaj wykształcania, sytuacja materialna oraz wsparcie ze strony najbliższych (rodziny) były istotnie skorelowane z częstością występowania zaburzeń depresyjnych oraz snu. Nie stwierdzono korelacji pomiędzy narastaniem zaburzeń jakości widzenia a nasileniem objawów depresyjnych i bezsennością, natomiast taką zależność zaobserwowano w odniesieniu do subiektywnej reakcji stresowej. Wnioski. Chorzy na AMD są grupą pacjentów podwyższonego ryzyka wystąpienia zaburzeń snu oraz rozwoju depresji i w związku z tym powinni zostać objęci opieką wielodyscyplinarnego zespołu, w którym oprócz lekarza okulisty powinien znaleźć się lekarz rodzinny, psychiatra oraz psycholog.
Źródło:
Health Problems of Civilization; 2018, 12, 4; 255-264
2353-6942
2354-0265
Pojawia się w:
Health Problems of Civilization
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quantum Hall Ferromagnet in Magnetically-Doped Quantum Wells
Autorzy:
Andrearczyk, T.
Jaroszyński, J.
Wróbel, J.
Karczewski, G.
Wojtowicz, T.
Papis, E.
Kamińska, E.
Piotrowska, A.
Popović, D.
Dietl, T.
Powiązania:
https://bibliotekanauki.pl/articles/2036881.pdf
Data publikacji:
2003-08
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.43.Nq
72.25.Dc
73.61.Ga
75.50.Pp
Opis:
The article reviews our recent studies on quantum Hall ferromagnetism in diluted magnetic semiconductors. We carried out magnetoresistance studies on modulation-doped, gated heterostructures of (Cd,Mn)Te/(Cd,Mg)Te:I. We put into evidence the formation of Ising quantum Hall ferromagnet with Curie temperature T$\text{}_{C}$ as high as 2 K. Quantum Hall ferromagnetism is manifested by anomalous magnetoresistance maxima. Moreover, magnitude of these spikes depends dramatically on the history of the sample, shows hysteresis when either magnetic field or gate voltage are swept, stretched-exponential time evolution characteristic of glassy systems, and strong Barkhausen noise. Our study suggests that these metastabilities stem from the slow dynamics of ferromagnetic domains.
Źródło:
Acta Physica Polonica A; 2003, 104, 2; 93-102
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magneto-Transport Characterization of Four-Arm Nanostructure Based on Ferromagnetic (Ga,Mn)As
Autorzy:
Andrearczyk, T.
Wosiński, T.
Figielski, T.
Mąkosa, A.
Tkaczyk, Z.
Łusakowska, E.
Wróbel, J.
Sadowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/1811912.pdf
Data publikacji:
2008-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.50.Jt
75.50.Pp
75.30.Gw
75.60.Ch
Opis:
We report on results of magneto-transport measurements performed on four-arm nanostructure fabricated from p-type ferromagnetic $Ga_{0.92}Mn_{0.08}As$ layer. The results reveal hysteresis-like behaviors of low field magnetoresistance. We interpret the magnetoresistance in terms of domain walls, which are expected to be trapped inside the nanostructure at some particular positions and which contribute to the total resistance.
Źródło:
Acta Physica Polonica A; 2008, 114, 5; 1049-1054
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies