Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Wang, S." wg kryterium: Autor


Tytuł:
Effect of surfactants on the flotation performance of low-rank coal by particle sliding process measurements
Wpływ surfaktantów na sprawność flotacji węgla niskiej jakości w pomiarach procesu przemieszczania się cząstek
Autorzy:
Wang, S.
Tao, X.
Powiązania:
https://bibliotekanauki.pl/articles/216970.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
węgiel o niskiej wartości
prędkość kątowa poślizgu
hydrofobowość
środek powierzchniowo czynny
wynik XPS
low rank coal
slip angle velocity
hydrophobicity
surfactant
XPS result
Opis:
In this paper, flotation performances of low-rank coal were investigated in the 2-ethyl hexanol, DAH (dodecyl amine hydrochloride), and SDS (sodium dodecyl sulfate) solutions, respectively. In order to reduce the heterogeneity and hydrodynamic effects on the hydrophobicity and movement trajectory of low-rank coal particles, respectively, experimental coal samples with low ash content and 0.500–0.250 mm in size fraction were adopted. The XPS result demonstrated that the total silicium and aluminum content of 0.500–0.250 mm size fraction was 1.58%. It was also found that the ash content of the 0.500–0.250 mm size fraction was 1.91%. Therefore, it demonstrated that there were few hydrophilic mineral particles on the coal sample surface. Thus, the heterogeneity effect of hydrophilic mineral particles during sliding process measurements can be ignored. The XPS result also indicated that after the grinding process, the mineral content on the low-rank coal surface was very small, which would play a small role in the hydrophobicity of low-rank coal samples. The flotation results indicated that the hydrophobicity of the low-rank coal particles could be improved by nonionic 2-ethyl hexanol and cation DAH surfactants. Moreover, from the analysis of slip angle velocity, it demonstrated that the flotation responses of low-rank coal were depressed by anionic SDS. Furthermore, it was observed that the slip angle velocity can be used to evaluate the effect of surfactant agents on the flotation performance of low-rank coal while the surfactant concentration was more than 10–6 mol/L.
W niniejszym artykule zbadano właściwości flotacyjne węgla niskiej jakości w roztworach 2-etyloheksanolu, DAH (chlorowodorku dodecylu) i SDS (dodecylosiarczanu sodu). W celu zmniejszenia niejednorodności i skutków hydrodynamicznych hydrofobowości i trajektorii ruchu cząstek węgla niskiej jakości przyjęto do doświadczeń próbki węgla o niskiej zawartości popiołu z klasy ziarnowej 0,500–0,250 mm. Wynik XPS wykazał, że całkowita zawartość krzemu i glinu w klasie ziarnowej 0,500–0,250 mm wynosiła 1,58%. Stwierdzono również, że zawartość popiołu w klasie ziarnowej 0,500–0,250 mm wynosiła 1,91%. W związku z tym wykazano, że na powierzchni próbki węgla znajduje się niewiele hydrofilowych cząstek mineralnych. W ten sposób można pominąć efekt heterogeniczności hydrofilowych cząstek mineralnych podczas pomiarów kąta poślizgu. Wynik XPS wskazał również, że po procesie mielenia zawartość minerałów na powierzchni węgla niskiej jakości była bardzo mała, dlatego też występuje słabe oddziaływanie na hydrofobowość tych próbek. Wyniki flotacji wskazują, że hydrofobowość cząstek węgla niskiej jakości można poprawić za pomocą niejonowego 2-etyloheksanolu i kationowych środków powierzchniowo czynnych DAH. Analiza prędkości kąta poślizgu wykazuje, że flotacja węgla niskiej jakości została obniżona przez SDS. Ponadto zaobserwowano, że prędkość kąta poślizgu może być wykorzystana do oceny wpływu środków powierzchniowo czynnych na sprawność flotacji węgla niskiej jakości, gdy ich stężenie jest większe niż 10–6 mol/L.
Źródło:
Gospodarka Surowcami Mineralnymi; 2018, 34, 1; 69-82
0860-0953
Pojawia się w:
Gospodarka Surowcami Mineralnymi
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Solid lubricated bearings performance degradation assessment: A fuzzy self-organizing map method
Ocena obniżenia charakterystyk łożysk ze smarem stałym: metoda rozmytych samoorganizujących się map
Autorzy:
Zhang, Ch.
Wang, S.
Powiązania:
https://bibliotekanauki.pl/articles/301012.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
solid lubricated bearings
performance degradation
fuzzy self-organizing map
łożyska ze smarem stałym
obniżenie charakterystyk
rozmyta mapa samoorganizująca się
Opis:
Solid lubricated bearings are common components in space mechanisms, and their reliability and performance degradation assessment are very crucial. In this study, a fuzzy self-organizing map method is used to perform performance degradation assessment. Feature vectors are constructed by indices of vibration as well as friction torque signal. Self-organizing map is then used to perform performance degradation assessment and the subjection of each feature vector to normal cluster on output layer is used as degradation indicator. Accelerated life test results show that this method can make effective performance degradation assessment and describe degradation degree in the whole life time.
Łożyska ze smarem stałym to powszechnie stosowane elementy urządzeń, a ich niezawodność i ocena degradacji charakterystyk są bardzo istotne. W przedstawionej pracy wykorzystano metodę rozmytych samoorganizujących się map do oceny obniżenia charakterystyk. Wektory cech skonstruowano za pomocą wskaźników wibracji, jak również sygnału momentu tarcia. Następnie dokonano oceny obniżenia charakterystyk z wykorzystaniem samoorganizującej się mapy, a za wskaźnik degradacji przyjęto przynależność każdego wektora cech do normalnej grupy w warstwie wyjściowej. Wyniki badań przyspieszonych pokazują, że przy użyciu omawianej metody można dokonywać skutecznej oceny obniżenia charakterystyk a także opisywać stopień degradacji w całym okresie eksploatacji.
Źródło:
Eksploatacja i Niezawodność; 2013, 15, 4; 397-402
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The technology of preparing green coating by conducting micro-arc oxidation on AZ91D magnesium alloy
Autorzy:
Wang, S.
Liu, P.
Powiązania:
https://bibliotekanauki.pl/articles/778739.pdf
Data publikacji:
2016
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
magnesium alloy
micro-arc oxidation
coating
Opis:
Micro-arc oxidation was applied to AZ91D magnesium alloy by taking K2Cr2O7  as the colouring salt in the silicate system. It was shown that the green coating obtained through performing micro-arc oxidation on magnesium alloy consisted of Mg, Mg2SiO4 , MgO, and Mg2SiO4  based on analysis of X-ray diffraction (XRD), and scanning electron microscopy (SEM). Among which, Mg2SiO4 was the colouring salt; there were something in the lamellar, pit, and convex forms found on the surface of the coating. The coating consisted of a porous, and a compact, layer from the outside to the inside. As demonstrated, the colour of the coating depended on the K2Cr2O7 concentration: it became gradually deeper with the addition of K2Cr2O7 and the increasing micro-arc oxidation time. The corrosion resistance and hardness of the green coating were greater than that of the matrix.
Źródło:
Polish Journal of Chemical Technology; 2016, 18, 4; 36-40
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The gomphotheriid mammal Platybelodon from the Middle Miocene of Linxia Basin, Gansu, China
Autorzy:
Wang, S.
He, W.
Chen, S.
Powiązania:
https://bibliotekanauki.pl/articles/21626.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
gomphotheriid mammal
mammal
Platybelodon
Mammalia
Gomphotheriidae
morphology
cladistics
Middle Miocene
Miocene
Linxia Basin
Gansu province
China
paleontology
Opis:
In this paper, we report on abundant fossils of Platybelodon from the Middle Miocene of the Linxia Basin, China. Most of the fossils were discovered at two localities (Laogou and Zengjia) in the upper Middle Miocene Hujialiang Formation, and possess derived characters for the genus, including a relatively slender upper incisor, the development of a transverse ledge on the narrowest part of the mandibular symphysis, narrow, elongate and hypsodont third molars, the development of fourth loph(id)s on the second molars, and the development of small enamel conules and cementum in the interloph(id)s. Following comparisons with other Eurasian platybelodonts, we assign these remains to Platybelodon grangeri, and demonstrate that they are morphologically intermediate between P. grangeri from the Tunggurian localities of Tarim Nor and Platybelodon Quarry in Inner Mongolia. We suggest that the locality of Laogou may be younger than that of Zengjia, based on the occurrence of platybelodonts showing a suite of more derived characters. In addition, we assign two further specimens of Platybelodon from the lower Middle Miocene Dongxiang Formation of the Linxia Basin to Platybelodon danovi, owing to their retention of plesiomorphic characters distinguishing them from other Linxia Platybelodon fossils. Based on a cladistic analysis, we propose an evolutionary sequence of platybelodonts in Eurasia, and discuss potential functional adaptations.
Źródło:
Acta Palaeontologica Polonica; 2013, 58, 2
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on marine fhotovoltaic power forecasting based on Wavelet Transform and Echo State Network
Autorzy:
Du, X.
Wang, S.
Zhang, J.
Powiązania:
https://bibliotekanauki.pl/articles/260584.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
marine photovoltaic power system
power forecasting
Wavelet Transform
Echo State Network
Opis:
With the rapid development of photovoltaic power generation technology, photovoltaic power generation system has gradually become an important component of the integrated energy system of marine. High precision short-term photovoltaic power generation forecasting is becoming one of the key technologies in ship energy saving and ship energy efficiency improving. Aiming at the characteristics of marine photovoltaic power generation system, we designed a highprecision power forecasting model (WT+ESN) for marine photovoltaic power generation system with anti-marine environmental interference. In this model, the information mining of the photovoltaic system in marine environment is carried out based on wavelet theory, then the forecasting model basing on echo state network is construct ed. Lastly, three kinds of error metrics are compared with the three traditional models by Matlab, the result shows that the model has high forecasting accuracy and strong robustness to marine environmental factors, which is of great significance to save fuel for ships, improve the energy utilization rate and assist the power dispatching and fuel dispatching of the marine power generation system.
Źródło:
Polish Maritime Research; 2017, S 2; 53-59
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved HLL Scheme for 1D Dam-Break Flows over Complex Topography
Autorzy:
Ying, X.
Wang, S. S. Y.
Powiązania:
https://bibliotekanauki.pl/articles/241462.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
dam-break flow
HLL approximate Riemann solver
finite volume method
Saint-Venant equations
Opis:
It has been discovered that the shallow water model based on approximate Riemann solvers can produce unrealistic flows in the case of uneven topography and inaccurate solutions of discharge near hydraulic jumps. To overcome these deficiencies, we proposed a new approach to implement the HLL Riemann solver for open channel flows, including: (1) adopting a form of Saint Venant equations which have only one source term representing driving forces; (2) defining discharge at interface and evaluating it according to the flux obtained by the HLL Riemann solver. In this paper, the performance of this new method is evaluated by means of dam-break flows over a channel with triangular cross-section and a natural river valley with complex topography, respectively. Comparisons of computed results with analytic solutions and data measured from the physical model show that the proposed method is capable of satisfactorily reproducing dam-break flows over complex topography.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2010, 57, 1; 31-41
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research on rub-impact loads response of ship shafting
Autorzy:
Dong, L.
Shi, Y.
Wang, S.
Powiązania:
https://bibliotekanauki.pl/articles/260309.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
rub-impact
Torsional Vibration
Test Rig
Rubbing Generator
Opis:
The anti-impact ability of shafting affects stability and security of the ship power transmission directly. Moreover, it also cannot be ignored that the rub-impact loads have influence on the torsion vibration of ship shafting. In order to solve the problem of engineering application of reliability assessment under rub-impact loads, a test rig with rubbing generator is established. By carrying out the integrative analysis, the torsional vibration characteristics, such as vibration amplitude and orbit of axle center under the rub impact load are studied. According to the rub-impact conditions obtained through numerical simulation, the experimental verification is carried out on the test rig with rubbing generator. The results show that it is not obvious the influence of rub-impact loads upon the shafting torsion vibration except in special working conditions, that can be simulated by the rubbing generator. The maximum amplitude of torsional vibration is influenced by the radial rigidity as well as the friction coefficient of rubbing body, and the degree of influence is difference under conditions of continuous rubbing and serious rubbing. By adjusting the rigidity of stern bearing, the influence of rub-impact upon shafting can be weaken, which provides a theoretical reference for the safety evaluation of ship shafting.
Źródło:
Polish Maritime Research; 2018, S 2; 85-91
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical analysis and research of the conveyor belt of plane turning belt conveyor based on discrete element method
Autorzy:
Li, D. Y.
Wang, S.
Hu, K.
Powiązania:
https://bibliotekanauki.pl/articles/224069.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
przenośnik taśmowy
siła taśmy przenośnikowej
metoda elementów dyskretnych
optymalizacja
belt conveyor
conveyor belt force
Discrete Element Method
optimization design
Opis:
In view of the size and the change of the load force of the conveyor belt at the turning point of the plane turning belt conveyor, the influencing factors of the stress of the conveyor belt at the turning point of the plane turning belt conveyor under full load condition are analyzed. A three dimensional model of the turning point of the plane turning belt conveyor is established. Combined with previous research experience, the formula for calculating the load is put forward. Based on discrete element method, multiple sets of internal curve elevation angle and the belt speed are used for dynamic simulation analysis. The results showed that the middle of conveyor belt is the most stressed, the lateral force second, the force of the inner conveyor belt is the least. Outside force increases with the increase of speed; there is no change in the middle band; the inner band force decreases with the increase of the velocity. Outside force decreases with the decrease of the inclination angle. With the change of the inclination angle, the force is basically unchanged. With the decreasing of the inclination angle, the force increases gradually. By optimizing the design parameters of the plane turning belt conveyor, the force of belt is reduced, and the service life of belt is improved.
Źródło:
Archives of Transport; 2017, 41, 1; 55-62
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of flood event in a reach of the Nile River using CCHE2D model
Autorzy:
Khan, A. A.
Wang, S. S. Y.
Powiązania:
https://bibliotekanauki.pl/articles/240958.pdf
Data publikacji:
2003
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
river flow simulation
flood stage
stage-discharge relationship
Opis:
The impact of design flood in terms of water surface level and maximum velocity in a reach on the Nile River is studied, using a depth-averaged two-dimensional model. The reach includes a proposed site for a shipyard maintenance harbour. The CCHE2D model, a depth-averaged two-dimensional model, is selected to perform both the steady state computation, for calibration purposes, and flood routing through the reach to obtain maximum water surface level and velocity information. Manning's coefficient was obtained by matching the computed and measured water surface level in the reach under steady flow conditions. The computed results of velocity and water surface profiles agreed satisfactorily with the measured data. The verified model was then used to simulate a flood event within the same reach. Stage-discharge relationships for various sections within the reach were obtained. The peak water surface level at each section was compared with the flow stage under normal flow conditions. The peak stage was found to be well below the proposed elevation of the construction site. The estimation of the peak velocity and water surface level might be useful for bank protection work.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2003, 50, 4; 329-341
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of three-dimension side discharge into an open channel
Autorzy:
Jia, Y.
Czernuszenko, W.
Wang, S. S. Y.
Powiązania:
https://bibliotekanauki.pl/articles/241514.pdf
Data publikacji:
2002
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Opis:
A three-dimensional computational model, solving Reynolds equations with the ke turbulence closure, has been presented to simulate the flow field in an open channel near a side-discharge channel. The purpose of this study was to exam this model's applicability for simulating the three-dimensional recirculation velocity field in the vicinity of the side discharge channel. The numerical simulations show that both the height and length of the recirculation zone were correctly predicted when compared with laboratory measurements. The predicted trend of the shape of the recirculation zone under different flow conditions agrees with experimental data. It was confirmed that the SMART upwinding scheme performs better than QUICK and HYBRID schemes, since it induces less numerical diffusion and no oscillations. It was found in this study that the SMART scheme needs some minor modifications for complex flow computations.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2002, 49, 1; 3-21
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimum design of fiber angle and hole orientation of an orthotropic plate
Autorzy:
Zhang, X.
Lu, A.
Wang, S.
Zhang, N.
Powiązania:
https://bibliotekanauki.pl/articles/280011.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
orthotropic plate
fiber orientation angle
hole orientation angle
conformal transformation method
differential evolution algorithm
Opis:
With the goal of decreasing the stress concentration along the hole boundary in an orthotropic plate under inequi-biaxial loadings, an optimum design of the fiber angle and hole orientation is presented. The maximum absolute tangential stress along the hole boundary is taken as the objective function, and the fiber orientation angle and the hole orientation angle are considered as design variables. The conformal transformation method of a complex function and the Differential Evolution (DE) algorithm are used. Two non-circular shapes, ellipse and hexagon are taken as examples to analyze the problem. Based on the results, we can conclude that the major axis of elliptical holes should be designed in the direction of the maximum external loading for a perforated structure in an orthotropic plate. However, the principal direction that has the larger Young’s modulus should be inclined to the direction of the minimum loading, especially for a significantly orthotropic plate.
Źródło:
Journal of Theoretical and Applied Mechanics; 2018, 56, 1; 297-311
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental research on energy release characteristics of water-bearing sandstone alongshore wharf
Autorzy:
Wang, S.
Zhao, Y.
Zou, Z.
Jia, H.
Powiązania:
https://bibliotekanauki.pl/articles/258604.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
sandstone
energy release
water content
confining pressure
Opis:
It is important to evaluate the deformation and failure of sandstone in the foundation engineering of coast, river bank and lake shore. While the deformation and failure of sandstone is a comprehensive result of energy release and dissipation, and energy release is the internal reason which leads to global failure of the sandstone. The experimental analysis is conducted on the character of energy revolution of the sandstone specimen by rating loading and unloading, and the catastrophe model is followed in analyzing elastic strain energy accumulation and release in rock deformation and failure. The index based on elastic energy release is proposed to assess the rock brittleness. It is found that increasing water content is to relieve energy release and catastrophe failure of the rock specimen, and weakening the capacity of elastic energy storage. The peak and residual values of elastic energy are raised as the confining pressure increases, and the post-peak released energy decreases progressively. The confining pressure strengthens energy storage and inhibits energy release of the rock specimen, and saturation of rock will weaken this inhibit effect. The brittleness index decreases with increasing confining pressure as the rock specimen transforming from brittle to ductile.
Źródło:
Polish Maritime Research; 2017, S 2; 147-153
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pleistocene Equid Brain Endocast from Shanxi Province, China
Autorzy:
Hu, Y.
Chen, Y.
Wang, S.
Sun, Q.
Powiązania:
https://bibliotekanauki.pl/articles/946031.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Paleobiologii PAN
Tematy:
mammalia
equus
equid brain
pleistocene
shanxi province
china
Opis:
Brain endocasts are rare in the fossil record because they are only preserved under exceptional conditions. An equid brain endocast from the early Pleistocene of Wanrong County, Shanxi Province, China, is reported in this paper. Measuring approximately 140 × 95.2 × 83 mm, the new specimen represents a relatively advanced adult horse brain. Comparisons indicate that it is more derived than those of Hyracotherium and Mesohippus in having an expanded neocortex, and more than those of Pliohippus and Hipparion in having an enlarged network of branching sulci; in most characters involving these sulci, the Shanxi brain conforms to the extant species Equus caballus. The sulcus diagonalis of the Equus brain appears to have evolved conservatively during the early Pleistocene, whereas the sulcus suprasylvius seems to have evolved rapidly. The specimen demonstrates that the development of a high degree of complexity predates the enlargement of the brain in the horse, which increased in length, breadth, and especially height during the late Cenozoic.
Źródło:
Acta Palaeontologica Polonica; 2014, 59, 2; 253-258
0567-7920
Pojawia się w:
Acta Palaeontologica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena wzrostu niezawodności w bezzałogowym statku latającym podczas kolejnych faz badania w locie
Reliability growth estimation for unmanned aerial vechicle during flight-testing phases
Autorzy:
Yu, Y.
Cui, W.
Song, B.
Wang, S.
Powiązania:
https://bibliotekanauki.pl/articles/301049.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
niezawodność
wzrost niezawodności
badanie wzrostu niezawodności
metoda bayesowska
reliability
reliability growth
reliability growth testing
Bayesian method
Opis:
Samoloty muszą być testowane w locie podczas procesu ich opracowywania i dla zapewnienia niezawodności powinny przejść, podczas faz badania w locie, proces wzrostu niezawodności obejmujący kolejne etapy: testowania, poszukiwania ukrytego uszkodzenia, udoskonalania i ponownego testowania. Jednakże z powodu złożonej budowy samolotów i wysokich kosztów badań w locie, badania wzrostu niezawodności z reguły przeprowadza się na małych próbkach. Trudno jest zatem ocenić wzrost niezawodności w kolejnych fazach badań w locie. W niniejszej pracy do estymacji wzrostu niezawodności zastosowano metodę bayesowską dla dwumianowego wzrostu niezawodności opartą na rozkładzie a priori Dirichleta oraz obliczono parametry rozkładu a posteriori wykorzystując metodę symulacji Markov-Chain Monte Carlo. Metodę zastosowano w kolejnych fazach badań w locie bezzałogowego statku latającego (Unmanned Aerial Vehicle), a użyty przykład pokazuje, iż metoda oparta na rozkładzie a priori Dirichleta może skrócić czas badań w locie. Parametry rozkładu a priori łatwo jest potwierdzić na podstawie uprzednio znanych informacji. Proponowana metoda nadaje się do oceny badań wzrostu niezawodności podczas kolejnych etapów badań w locie.
It is necessary for airplanes to be fl ight-tested during the development process, and they should pass the testing/failurefi nding/improvement/re-testing reliability growth process during the fl ight-testing phases to ensure its reliability. However, due to airplane complexity and the high costs of fl ight-testing, the reliability growth testing is usually done with small samples. It is thus diffi cult to estimate the reliability growth during the fl ight-testing phases. In this paper, Bayesian method for binomial reliability growth based on the Dirichlet prior distribution is applied to reliability growth estimation, and the parameters of the posterior distribution are calculated by using the simulation method of Markov-Chain Monte Carlo. The method is applied to the Unmanned Aerial Vehicle test fl ight phases, and the example shows that the method based on the Dirichlet prior distribution can save the fl ight-testing time. It is easy to confi rm the parameters of the prior distribution by using the prior information. The proposed method is suitable for reliability growth testing estimation during fl ight-testing stages.
Źródło:
Eksploatacja i Niezawodność; 2010, 2; 43-47
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kinetics and mechanism of one-step reductive leaching of manganese oxide ores by EDTA/EDTA-2Na
Autorzy:
Zhang, C.
Wang, S.
Cao, Z.
Zhong, H.
Powiązania:
https://bibliotekanauki.pl/articles/109834.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
kinetics
EDTA
reductive leaching
manganese oxide ores
EDTA-2Na
Opis:
In this research, the kinetics and mechanism of one-step reductive leaching of manganese oxide ores by ethylenediaminetetraacetic acid (EDTA) or its disodium salt (EDTA-2Na) in an aqueous medium have been investigated. The kinetic data of this reductive leaching process may be described by the Avrami model, and the apparent activation energy was determined to be 15.8 kJ·mol-1/7.9 kJ·mol-1 for leaching by EDTA/EDTA-2Na with a reaction order of -1.7/2.0. The EDTA/EDTA-2Na leach liquor characterized and analyzed by X-ray photoelectron spectra (XPS), Fourier transform infrared spectra (FTIR), and total organic carbon (TOC) determination denoted that the oxidation-reduction reaction happened between manganese(IV) and EDTA/EDTA-2Na, and a coordination complex, EDTA-manganese(II/III) formed. This new process can be easily used to leach manganese from manganese oxide ores in a moderate environment with the pH range of 5–8.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 858-867
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on a novel hydroxamic acid as the collector of rhodochrosite
Autorzy:
Zhao, G.
Dai, T.
Wang, S.
Zhong, H.
Powiązania:
https://bibliotekanauki.pl/articles/110816.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
flotation
rhodochrosite
hydroxamic acid
DFT
Opis:
A novel collector, tert-butyl benzohydroxamic acid (TBHA), was first introduced in rhodochrosite flotation. The performance of TBHA was investigated by the density functional theory (DFT) calculation along with the micro flotation test, zeta potential determination and XPS analysis, compared with benzohydroxamic acid (BHA). TBHA has stronger affinity to the mineral than BHA in terms of frontier molecular orbital, atomic net charge and bond population. The substitution of tert-butyl group on the benzene ring improves the affinity of the hydroxamic acid to the mineral. TBHA exhibits excellent collecting ability to rhodochrosite with a recovery of about 99% at a concentration of 3.89×10-4 mol/dm3 and pH 6.5. The hydroxamic acid molecules are adhered on mineral surfaces by chemical adsorption, resulting in negative shifts for the zeta potential of rhodochrosite with the presence of the collector. Chemical adsorption can be also confirmed from XPS analyses that the atomic concentration ratios of C and O to Mn on the treated mineral surfaces were increased and the binding energy of Mn3s was decreased. The experimental data achieve excellent agreement with the computational analyses.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 428-439
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oxidation of a lignin model compound of benzyl-ether type linkage in water with H2O2 under an oxygen atmosphere catalyzed by Co(Salen)
Utlenianie modelowego związku ligniny z typem wiązania benzylowo-eterowego w wodzie z H2O2 w atmosferze tlenu katalizowane Co(Salen)
Autorzy:
Zhou, X.F.
Qin, J.X.
Wang, S.R.
Powiązania:
https://bibliotekanauki.pl/articles/52363.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Drewna
Tematy:
oxidation
lignin model compound
benzyl-ether type
linkage
water
oxygen atmosphere
cobalt salen complex
catalytic property
analytical technique
veratrylglycerol-beta-guaiacyl-alpha,gamma-dimethylether
Opis:
The catalytic properties of Cobalt salen? complex in the oxidation of a lignin model compound [veratrylglycerol-β-guaiacyl-α,γ-dimethylether, VGD] have been investigated in order to obtain the mechanistic aspects of the reaction between Co(salen) and VGD under an oxygen atmosphere using hydrogen peroxide as an oxidant. VGD was found to undergo structural changes in response to the catalytic reaction as characterised by different analytical techniques (FT-IR, H-1 NMR and GC-MS), yielding 2-methoxy phenol and biphenyl. A mechanism for the oxidation of VGD was postulated.
Zbadano katalityczne właściwości kompleksu Co(Salen) w utlenianiu modelowego związku ligniny (veratrylglycerol-β-guaiacyl-α,γ-dimetyleter, VGD) w celu określenia mechanicznych aspektów reakcji pomiędzy Co(salen) i VGD w atmosferze tlenu przy zastosowaniu nadtlenku wodoru jako utleniacza. Zaobserwowano, że w VGD zaszły zmiany strukturalne w odpowiedzi na reakcję katalityczną, co przedstawiono za pomocą różnych technik analitycznych (FTIR, H-1 NMR oraz GC-MS). W efekcie otrzymano 2-metoksy fenol i bifenyl.
Źródło:
Drewno. Prace Naukowe. Doniesienia. Komunikaty; 2011, 54, 186
1644-3985
Pojawia się w:
Drewno. Prace Naukowe. Doniesienia. Komunikaty
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of thermal treatment on colour and texture of Typha latifolia L.
Autorzy:
Zang, M.
Zhou, Y-H.
Wang, S.
Tang, J.
Powiązania:
https://bibliotekanauki.pl/articles/25390.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Opis:
Through the analysis of the residual activity of peroxidase (POD), chromatic aberration, shear intensity and shear power, the effects of different thermal treatment times at 100°C on the POD, surface colour and texture of Typha latifolia L. were evaluated. The results showed that the activity of POD decreased with the increasing thermal treatment time at 100°C. The regeneration amount of POD increased first for some time and then started to decrease with the treatment time. Thermal treatment times 1.0 and 1.5 min at 100°C exhibited maximum regeneration of POD for the samples stored at 20 and 37°C, respectively. The sample had acceptable texture and surface colour when they were treated at 100°C for 4 min because the POD in the sample was inactivated to an acceptable level.
Źródło:
International Agrophysics; 2012, 26, 2
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vibrational Properties of Sundatang Soundboard
Autorzy:
Batahong, R. Y.
Dayou, J.
Wang, S.
Lee, J.
Powiązania:
https://bibliotekanauki.pl/articles/176904.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sundatang
frequency response function
impact testing
mode shape
Opis:
This paper presents the measurement of vibrational properties of sundatang soundboard. Sundatang is a plucked stringed traditional musical instrument that is popular among the Kadazandusun communities in Sabah, Malaysia. The vibrational properties of the soundboard are measured using CADA-X impact hammering system in a condition where the instrument is without any string. There are two types of sundatang used in this study; one made from acacia and the other from vitex wood. In this measurement, frequency response functions (FRFs) and modal parameters of the top plate and back plate of this instrument are obtained. It is found that in free edge, fundamental frequency of both plates of acacia sundatang is greater than the vitex sundatang in a range of 112 Hz to 230 Hz. However, in clamped edge (attached to its ribs), it was modified to a lower frequency and closer to each other in the range of 55 Hz to 59 Hz. Another finding is the detection of the excitation of similar mode shape at different resonance frequencies. This phenomenon is termed as Different State of Mode (DSM) which is observed may be because the number of testing points is not enough. Findings of this study provide important information to the study of quality development of this instrument.
Źródło:
Archives of Acoustics; 2014, 39, 2; 177-187
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Expression and characterisation of cucumber fruit flesh thickness-related gene CSA2M058670.1
Autorzy:
Wang, W.
Wang, S.
Guo, Y.
Li, M.
Hou, L.
Powiązania:
https://bibliotekanauki.pl/articles/12709293.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Opis:
Bulked segregant analysis combined with specific length amplified fragment sequencing techniques have been applied to determine the fine genetic mapping of fruit flesh thickness-related genes in cucumber. Herein, the Csa2M058670.1 gene was subjected to real time fluorescence quantitative PCR (qRT-PCR) and sequence analysis, indicating a strong correlation with cucumber fruit flesh thickness. Expression and characterisation of the Csa2M058670.1 gene were performed based on previous studies. The results of the fluorescence-based quantitative PCR showed that Csa2M058670.1 was expressed in all organs, but levels were highest in fruit peel, fruit flesh, and female flowers. Furthermore, Csa2M058670.1 expression was induced by abiotic stresses including drought, low temperature, and high salt. Domain analysis revealed that the protein encoded by Csa2M058670.1 possesses an SET (Su(var), Enhancern of zeste CE(z), and Trithorax) domain that may control cell division and differentiation. Therefore, we speculated that Csa2M058670.1 might affect fruit flesh thickness in cucumbers by influencing cell division.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2020, 19, 2; 25-33
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel method to extract vanadium from high-grade vanadium slag: non-salt roasting and alkaline leaching
Autorzy:
Liu, B.
Meng, L.
Zheng, S.
Li, M.
Wang, S.
Powiązania:
https://bibliotekanauki.pl/articles/110480.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
high-grade vanadium slag
cleaner production
non-salt roasting
alkaline leaching
mechanisms
Opis:
A new method using non-salt roasting-alkaline leaching to treat vanadium slag was proposed in this study. The V(III) in vanadium slag is oxidized to V(V) by roasting and the latter can be effectively leached out as vanadate by alkaline leaching. This method possesses distinct advantage of being able to treat high-grade vanadium slag. For the South Africa high-grade vanadium slag, the maximum vanadium recovery of 98% was achieved when the reaction conditions were roasting temperature of 850 °C, roasting time of 2 h, alkali concentration of 30 wt.%, leaching temperature of 210 °C, and leaching time of 2 h. The roasting and leaching mechanisms have been well elucidated based on the XRD and SEM analysis results. The phases transitions of vanadium slag were clearly presented. This work has laid the foundation for the industrial application of non-salt roasting-alkaline leaching and provided new insights into effective extraction of high-grade vanadium slag.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 3; 657-667
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The application of dynamic bayesian network to reliability assessment of emu traction system
Zastosowanie dynamicznych sieci bayesowskich do oceny niezawodności elektrycznego systemu trakcyjnego
Autorzy:
Wang, Y.
Bi, L.
Wang, S.
Lin, S.
Xiang, W.
Powiązania:
https://bibliotekanauki.pl/articles/302105.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
dynamiczna sieć bayesowska
system trakcyjny
ocena niezawodności
algorytm przeszukiwania wszerz
DBN
traction system
reliability assessment
breadth-first-search algorithm
Opis:
W artykule omówiono nowatorskie zastosowanie dynamicznej sieci bayesowskiej (DBN) do oceny niezawodności elektrycznego systemu trakcyjnego ze szczególnym uwzględnieniem metod modelowania DBN. W związku z rosnącą złożonością elektrycznych systemów trakcyjnych oraz wynikającą z niej coraz większą ilością współzależności między komponentami, systemy te narażone są coraz częściej na awarie części składowych. Chociaż istnieje wiele badań dotyczących oceny niezawodności systemów trakcyjnych, stosowane obecnie narzędzia nie mają odpowiedniej mocy modelowania koniecznej do opisu zależności funkcjonalnych i czasowych pomiędzy częściami składowymi. W niniejszej pracy zaproponowano nową metodę modelowania generowania DBN, którą można stosować w odniesieniu do systemów składających się z pewnych określonych komponentów oraz różnych typów rozchodzących się przez nie przepływów. Zależności funkcjonalne i czasowe opisano, odpowiednio, za pomocą tablicy komponentowych prawdopodobieństw warunkowych (Component-based Conditional Probability Table, CPT) oraz tablicy czasowo-zależnych prawdopodobieństw warunkowych. Ponieważ złożoność systemu nie pozwala na zamodelowanie go w prosty sposób jako DBN, do automatycznej budowy modelu DBN wykorzystano algorytm przeszukiwania wszerz (Breadth-First-Search). Oceny niezawodności systemu trakcyjnego z wykorzystaniem proponowanej metody opartej na DBN można dokonywać w dowolnym czasie, co ma ogromne znaczenie przy planowaniu konserwacji w celu zapewnienia bezpieczeństwa systemu.
The article introduces a novel application of a Dynamic Bayesian Network (DBN) in the reliability assessment with regard to the traction system of Electric Multiple Units (EMU), which focus on modeling approach to DBN construction. As a result of high complexity and growing interdependencies, it is increasingly vulnerable to the failure of components. Although many studies on the use of BN for estimating the system reliability have been conducted, there is a lack of effective modeling power regarding current tools in depicting both functional and temporal dependencies between components. In this paper, a new modeling approach to DBN generation is submitted, which can be applied to the system made up of certain components and different types of flows propagating through them. The Component-based CPT (Conditional Probability Table) and Time-dependent CPT are used to describe functional dependencies and temporal dependencies respectively. As the complexity of the system cannot be modeled in a tractable way as a DBN, a Breadth-First-Search (BFS) algorithm is introduced for the construction of the DBN model in an automated manner. With the application of the proposed DBN-based approach, the reliability of the traction system can be evaluated at any given time, which is of great significance to determine the plan of maintenance in an effort to ensure the system safety.
Źródło:
Eksploatacja i Niezawodność; 2017, 19, 3; 349-357
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research of lateral force of pipe conveyor belt’s vertical transport section
Autorzy:
Wang, S.
Guo, Y.-C.
Li, D. Y.
Hu, K.
Powiązania:
https://bibliotekanauki.pl/articles/223504.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pipe belt conveyor
vertical transport
lateral force
discrete element simulation
experimental verification
przenośnik taśmowy
transport pionowy
siła boczna
symulacja
platforma doświadczalna
Opis:
In order to release the lateral force of pipe conveyor belt in vertical transportation, the thesis had a study of the lateral force of the conveyor belt. By making use of Janssen Principles and fractal theory, based on reasonable simplification, the author established a mathematical model of the lateral force in vertical transportation, and with the research foundation of the pipe belt conveyor for underground transportation, through solution analysis, the author found out that the change of material diameter would lead to nonlinear variation of the lateral force of the conveyor belt. Under the circumstances of different material diameter, discrete element method was adopted to simulate the lateral force of the conveyor belt, thus working out the distribution curve chart of the lateral force. To verify the reliability of the theory, the author built an experimental platform for pipe conveyor belt in vertical transportation, and experimented with five groups of materials in different diameter, working out the strain of lateral force of the characteristic conveyor belt; by comparing the theoretical result, the simulation result and the experimental result, it showed that the solution to relieving lateral force through optimization selection of material diameter put forward in this thesis was reasonable and effective. It provides theoretical reference for the design of pipe belt conveyor.
Źródło:
Archives of Transport; 2016, 37, 1; 67-75
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On the topological properties of the certain neural networks
Autorzy:
Liu, J.-B.
Zhao, J.
Wang, S.
Javaid, M.
Cao, J.
Powiązania:
https://bibliotekanauki.pl/articles/91804.pdf
Data publikacji:
2018
Wydawca:
Społeczna Akademia Nauk w Łodzi. Polskie Towarzystwo Sieci Neuronowych
Tematy:
neural network
topological indices
graph theory
Opis:
A topological index is a numeric quantity associated with a network or a graph that characterizes its whole structural properties. In [Javaid and Cao, Neural Computing and Applications, DOI 10.1007/s00521-017-2972-1], the various degree-based topological indices for the probabilistic neural networks are studied. We extend this study by considering the calculations of the other topological indices, and derive the analytical closed formulas for these new topological indices of the probabilistic neural network. Moreover, a comparative study using computer-based graphs has been carried out first time to clarify the nature of the computed topological descriptors for the probabilistic neural networks. Our results extend some known conclusions.
Źródło:
Journal of Artificial Intelligence and Soft Computing Research; 2018, 8, 4; 257-268
2083-2567
2449-6499
Pojawia się w:
Journal of Artificial Intelligence and Soft Computing Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling the ecosystem response to summer coastal upwelling in the Northern South China Sea
Autorzy:
Jiang, R.
Wang, Y.-S.
Powiązania:
https://bibliotekanauki.pl/articles/47804.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
nutrient
phytoplankton
zooplankton
ecosystem model
coastal upwelling
hydrographic condition
seasonal change
sea surface temperature
South China Sea
Opis:
A coupled three-dimensional physical model and a nitrogen-based nutrient, phytoplankton, zooplankton, and detritus (NPZD) ecosystem model were applied to simulate the summer coastal upwelling system over the continental shelf of northern South China Sea (NSCS) and its impact on hydrographic conditions and ecosystem. The simulated results were comprehensively validated against field and satellite measurements. The model results show that the near shore ecosystem of NSCS has significant responses to the summer coastal upwelling system. The Shantou Coast to the Nanri Islands of Fujian province (YD) and the east of the Leizhou Peninsula (QD) are two main regions affected by NSCS summer coast upwelling. During summer, these two coastal areas are characterized by nearshore cold and high salinity upwelling current. Further, the summer coastal upwelling serves as a perfect nutrient pump, which lifts up and advects nutrient-rich current from deep to surface, from inner shelf to about 30 km outer shelf. This nutrient source reaches its maximum in the middle of July and then begins to decrease. However, the maximum phytoplankton and chlorophyll a do not coincide with the maximum nutrients and delay for about 10 days. Because of the intensive seasonal thermocline and the complicated current transporting through Qiongzhou strait, the ecological responding of QD is less pronounced than YD. This study has a better understanding of the physically modulated ecological responses to the NSCS summer coastal upwelling system.
Źródło:
Oceanologia; 2018, 60, 1
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The environment and the utilization the status of the subsidence area in the Xu Zhou, Yan Zhou and Huainan and Huaibei region of China
Osiadanie terenu i jego wpływ na środowisko w chińskich regionach Xu Zhou, Yan Zhou oraz Huainan i Huaibei
Autorzy:
Fan, T. G.
Yan, J. P.
Wang, S.
Ruan, S. X.
Powiązania:
https://bibliotekanauki.pl/articles/348809.pdf
Data publikacji:
2012
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
obniżenie poziomu wód
stan zasobów wodnych
utylizacja
coal mine subsidence waters
water resources status
utilization
Opis:
The main coal mining subsidence area of the Xu Zhou, Yan Zhou, Huaihe collapsed state region were investigated including the environment state, water surface area, pollution source, and the utilization state. Some advice wasproposed to protect the environment of the subsidence area.
Badaniem objęto główną strefę osiadania w stanie całkowitego zawału w chińskich regionach Xu Zhou, Yan Zhou i Huaihe, w tym stan otoczenia, wody powierzchniowe, źródła zanieczyszczenia oraz utylizację. Zaproponowano kilka rozwiązań dla ochrony środowiska strefy osiadania.
Źródło:
AGH Journal of Mining and Geoengineering; 2012, 36, 3; 127-133
1732-6702
Pojawia się w:
AGH Journal of Mining and Geoengineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Time-dependent Pancharatnam phases and quantum correlations for coupling superconducting two-qubit system with dissipative environment
Autorzy:
Xue, Liyuan
Wang, Z. S.
Powiązania:
https://bibliotekanauki.pl/articles/1835809.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
Pancharatnam phases
quantum concurrence
quantum discord
dissipative environment
Bloch radius
Opis:
Two coupling superconducting qubits are studied for the quantum concurrence, discord, and Pancharatnam phase, for the X and Y states under the dephasing and instantaneous decay environment as well as their couplings. We find that the X and Y states are special mixed states according to the Bloch radius. In general, the larger the environment and phonon number are at the larger region of time, the larger the quantum concurrence and discord are. But we find that the environment correlations are helpful to implement the quantum computation. The Pancharatnam phases provide a way to distinguish the X and Y states.
Źródło:
Optica Applicata; 2020, 50, 4; 511-537
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adsorption behavior of surfactants on lignite particles with different densities in aqueous medium
Autorzy:
Wang, J.
He, Y.
Wen, B.
Ling, X.
Xie, W.
Wang, S.
Powiązania:
https://bibliotekanauki.pl/articles/110538.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
interfacial surface free energy
adsorption
lignite
surfactant
Washburn equation
Opis:
Lignite is well known for its strong hydrophilicity and hard-to-float properties. However, the surface free energy of the solid is made up of two components, that is the Lifshitz-van der Waals and acid-base interaction energy. Differences in these two components between the low ash (lower density) and high ash fraction (higher density) provide a benefit for improving the separation efficiency through introducing surfactants in flotation. In this paper, thermodynamic characterization of three density lignite fractions was measured by a Washburn dynamic method. Combining the Washburn equation and Van Oss-Chaudhury-Good theory, the surface free energy components of three samples were calculated according to the wetting process by n-hexane, diiodomethane, deionized water and ethylene glycol. The Lifshitz-van der Waals part of surface free energy reduced with the coal density increase, especially between fractions of -1.45 g/cm3 and 1.45-1.80 g/cm3, while the Lewis base part increased slightly. The interfacial interaction free energies between the surfactant and lignite in aqueous medium indicated that the low hydrophilic index benefited for the stronger adsorption intensity. Increase of the surfactant Lifshitz-van der Waals component increases the adsorptive intensity on lower density lignite and the repulsive intensity on higher density lignite, which is beneficial for separation.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 996-1008
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Antibiofilm activity against Staphylococcus aureus and content analysis of Taraxacum Officinale phenolic extract
Autorzy:
Xu, P.
Xu, X.B.
Khan, A.
Fotina, T.
Wang, S.H.
Powiązania:
https://bibliotekanauki.pl/articles/2087162.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Taraxacum Officinale
phenolic
antibacterial mechanism
HPLC
Staphylococcus aureus
Źródło:
Polish Journal of Veterinary Sciences; 2021, 24, 2; 243-251
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Expression analysis of multifunctional RNA-binding protein hnRNP K during development of mammalian testis
Autorzy:
Xu, H.
Zhang, P.
Li, R.
Wu, W.
Wang, S.
Xu, Y.
Powiązania:
https://bibliotekanauki.pl/articles/2087724.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
hnRNP K
testis development
spermatogenesis
pig
rat
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 2; 343-352
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Reinforcement of the TNT System by a Newly-designed GAP-based Polyurethane-Urea: a Molecular Simulation Investigation
Autorzy:
Qian, W.
Shu, Y.
Ma, Q.
Li, H.
Wang, S.
Chen, X.
Powiązania:
https://bibliotekanauki.pl/articles/358512.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
TNT
GAP
polyurethane-urea
inter-molecular interaction
mechanical properties
Opis:
A glycidyl azide (GAP)-based polyurethane-urea (PUU) modifier used in the 1,3,5-trinitrotoluene (TNT)-based composite explosive was investigated by molecular simulation. Inter-molecular interactions were investigated using quantum chemistry calculation on the dimer of TNT and GAP-PUU, and attractive forces were found between the two molecules. The cohesive energy densities and the solubility parameters were obtained through molecular dynamics simulations combined with thermodynamic calculations on the TNT and GAP-PUU amorphous cell models, and the miscibility of the modifier in molten TNT was predicted to be good. The interaction energies and the mechanical properties were then obtained by molecular simulations and mechanical calculations on the solid-phase models of the GAP-PUU with TNT along three crystalline directions, and an improvement in the mechanical properties was predicted.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 2; 411-426
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of the characteristics about insulation damage based on the accelerated life tests
Badanie charakterystyk uszkodzeń izolacji w oparciu o testy przyspieszonego starzenia
Autorzy:
Yang, Y. H.
Wang, K.-S.
Powiązania:
https://bibliotekanauki.pl/articles/300857.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
accelerated life testing
competing failure mode
insulation degradation
Gompertz-type relation shape parameter
Opis:
In this study the Maximum Likelihood Estimator is taken to identify the characteristics of insulation failure about the class-H motors by considering the accelerated life testing data under censored situation from Nelson. Based on the Weibull survival modeling the failure is expressed as the series connection of three modes, namely the turn, phase, and ground, respectively, the so-called competing failure. The main concern in present investigation is about the variation of shape parameters, β with the temperature. The Gompertz-type relation of βi(T) is suggested with the reference temperature, Tri for the i-th failure mode. It is found that the Tri ’s not only distinguish the characteristics of cumulative damage process about the insulation, but also involve the estimation of mean-time-to-failure (MTTF). Physically Tri denotes the turning point of varied βi as the i-th failure mode becomes moderate in a sense of less capability about the accumulation of insulation damage at higher temperature where corresponds the thermal degradation process. The numerical results indicate that the insulation technique used is acceptable as the operation temperature kept in the use condition 363K. According to the predicted lifetime as the temperature rises up to 440K, which still within the allowed range in application, the turn structure needs to be rearranged primarily, then the phase next. The ground mode has only influence on the failure at much higher temperature.
Źródło:
Eksploatacja i Niezawodność; 2013, 15, 4; 325-331
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simultaneous extraction of vanadium and chromium from vanadium slag using low-pressure liquid phase oxidation method
Autorzy:
Xia, J.-P.
Zheng, S.-L.
Wang, S.-N.
Liu, B.
Zou, X.
Powiązania:
https://bibliotekanauki.pl/articles/110818.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
vanadium slag
low pressure leaching
liquid phase oxidation
kinetics
Opis:
A low-pressure liquid oxidation method was proposed and proven to be effective to extract vanadium and chromium simultaneously from the vanadium slag in concentrated NaOH aqueous solutions. The effect of temperature, NaOH mass concentration, liquid-to-solid mass ratio, stirring speed and pressure on the extraction of vanadium and chromium in NaOH aqueous solutions were systematically investigated. Under the optimal reaction conditions (temperature of 473 K, liquid-to-solid mass ratio of 6:1, stirring speed of 700 rpm, NaOH mass concentration of 50%, pressure of 1 MPa and reaction time of 180 min), the vanadium and chromium recovery reached 95% and 90%, respectively. It was found that the reaction temperature and NaOH concentration were important factors for the extraction of vanadium and chromium. The kinetics of the decomposition of vanadium slag in concentrated NaOH aqueous under low pressure was analyzed using the shrinking core model, and the results indicated that the extraction of vanadium and chromium were both governed by the internal diffusion step, with apparent activation energies calculated to be 26.22 and 32.79 kJ/mol, respectively.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 609-619
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fatigue life prediction for Ni-based superalloy GH4169 considering machined surface roughness and residual stress effects
Autorzy:
Wu, Z. R.
Wang, S. Q.
Yang, X.
Pan, L.
Song, Y. D.
Powiązania:
https://bibliotekanauki.pl/articles/1839712.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
surface roughness
residual stress
fatigue crack
life prediction
GH4169
Opis:
Establishing a fatigue life prediction model considering the machined surface state is of great significance to improve fatigue life prediction accuracy. Fatigue tests with different machined surface states of GH4169 alloy were conducted firstly. The influence of surface state parameters on the fatigue life was analyzed. Then, the machined surface stress concentration factor and residual stress were introduced into the fatigue crack initiation and propagation models. Finally, the fatigue life prediction model of GH4169 material considering the surface states was established. The prediction results based on the proposed model are almost within a factor of two scatter band of the test results.
Źródło:
Journal of Theoretical and Applied Mechanics; 2021, 59, 2; 215-226
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Piecewise reliability-dependent hazard rate for composites under fatigue loading adjustment
Konstrukcja funkcji ryzyka uszkodzeń kawałkami zależnej od niezawodności dla kompozytów poddanych różnym scenariuszom obciążenia zmęczeniowego
Autorzy:
Chen, C.-L.
Wang, K.-S.
Powiązania:
https://bibliotekanauki.pl/articles/281955.pdf
Data publikacji:
2012
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
fatigue loading adjustment
hazard rate function
dynamical reliability
Monte Carlo simulation
linear damage sum
Opis:
Based on the derived transition period and reliability drop, this paper proposes a method of piecewise combination of the reliability-dependent hazard rate function named (eocp) model to describe the dynamical reliability in a two-stage fatigue loading process. First, the parameters eo, c, p are fitted through simulated failure data under various constant- amplitude cyclic stresses. The reliability of the high-low loading process is described piecewise with the corresponding values of (eo, c, p) for each respective stress level, and maintains Ra in the transition period while Ra denotes the reliability at which the stress level changes. The reliability of the low-high process is determined by subtracting the portion of reliability drop at Ra from the piecewise fitted curves. The proposed reliability behavior is verified successfully. The linear damage sum is found to be larger than unity for the high-low loading, and on the contrary for the low-high cases. A larger difference between the stress level changed results in larger deviation of damage sum from unity, especially when Ra near 0.9.
W oparciu o wyznaczony okres przejściowy i spadek niezawodności, artykuł prezentuje metodę określania funkcji ryzyka uszkodzenia kawałkami zależnej od poziomu niezawodności, zwanej (eocp) i służącej do modelowania dynamicznej niezawodności dla dwustanowych procesów obciążania zmęczeniowego. Na poczatku, parametry eo, c, i p dopasowano do danych otrzymanych w drodze symulacji uszkodzeń pod wpływem działania cyklicznych naprężeń o kilku stałych amplitudach. Niezawodność dla obciążeń przechodzących od dużej amplitudy do małej opisano kawałkami zależnymi od poziomu przykładanych naprężeń i odpowiadającymi im wartościami eo, c, i p. Wynosi ona Ra w okresie przejściowym, gdzie Ra jest niezawodnością, przy której poziom naprężeń jest zmieniany. Niezawodność przy obciążeniu rosnącym wyznaczono, odejmując część jej spadku przy Ra od kawałkami dopasowanych krzywych. Zaproponowany sposób opisu niezawodności sukcesywnie weryfikowano. Zaobserwowano, że liniowa suma uszkodzeń przekracza jedność dla scenariusza obciążeń stopniowo malejących i nie osiąga tej wartości w przypadku przeciwnym. Większe różnice w poziomach obciążeń skutkowały w większych odstępstwach liniowej sumy uszkodzeń od jedności. Szczególnie duże zauważono dla Ra = 0.9.
Źródło:
Journal of Theoretical and Applied Mechanics; 2012, 50, 1; 231-250
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Derivation of formulas in spherical trigonometry based on rotation matrix
Autorzy:
Hsieh, T. H.
Wang, S. Z.
Liu, W.
Zhao, J. S.
Chen, C. L.
Powiązania:
https://bibliotekanauki.pl/articles/116775.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
spherical trigonometry
rotation matrix
spherical triangle
formulas of spherical triangle
nautical mathematics
geometric method
spherical navigation
Astronavigation
Opis:
The formulas of spherical triangle, which are widely used to solve various navigation problems, are the important basic knowledge of nautical mathematics. Because the sine rules and the cosine rules for the sides are the fundamental formulas to derive the other spherical triangle formulas, they are also called the genetic codes of the spherical triangle formulas. In the teaching process, teachers usually use the geometric method to derive and prove these fundamental formulas. However, the derivation of geometric methods is complicated and difficult to understand. To improve the teaching process, this paper proposes the three-dimensional rotation method, which is based on conversion of two cartesian coordinate frames using the rotation matrices. This method can easily and simultaneously derive the sine rules, the cosine rules for the sides, and the five-part formulas (I), and is also helpful to solve different kinds of spherical navigation problems.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2019, 13, 3; 553-558
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Molecular cloning, recombinant expression, and purification of osteocalcin in sika deer (Cervus nippon) antler
Autorzy:
Li, X.
Liu, M.
Bai, X.
Li, Y.
Zhao, Y.
Wang, S.
Wang, J.
Powiązania:
https://bibliotekanauki.pl/articles/2087587.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Cervus nippon
osteocalcin
molecular cloning
expression
purification
Źródło:
Polish Journal of Veterinary Sciences; 2019, 1; 143-150
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ship recognition and tracking system for intelligent ship based on deep learning framework
Autorzy:
Liu, B.
Wang, S. Z.
Xie, Z. X.
Zhao, J. S.
Li, M. F.
Powiązania:
https://bibliotekanauki.pl/articles/117419.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
intelligent ship
deep learning framework
ship recognition system
ship tracking system
ship recognition and tracking system
intelligent navigation
autonomous ship
maritime safety
Opis:
Automatically recognizing and tracking dynamic targets on the sea is an important task for intelligent navigation, which is the prerequisite and foundation of the realization of autonomous ships. Nowadays, the radar is a typical perception system which is used to detect targets, but the radar echo cannot depict the target’s shape and appearance, which affects the decision-making ability of the ship collision avoidance. Therefore, visual perception system based on camera video is very useful for further supporting the autonomous ship navigational system. However, ship’s recognition and tracking has been a challenge task in the navigational application field due to the long distance detection and the ship itself motion. An effective and stable approach is required to resolve this problem. In this paper, a novel ship recognition and tracking system is proposed by using the deep learning framework. In this framework, the deep residual network and cross-layer jump connection policy are employed to extract the advanced ship features which help enhance the classification accuracy, thus improves the performance of the object recognition. Experimentally, the superiority of the proposed ship recognition and tracking system was confirmed by comparing it with state of-the-art algorithms on a large number of ship video datasets.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2019, 13, 4; 699-705
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optical Properties of InAs Quantum Dots
Autorzy:
Willander, M.
Zhao, Q. X.
Jacob, A. P.
Wang, S. M.
Wei, Y. Q.
Powiązania:
https://bibliotekanauki.pl/articles/2035579.pdf
Data publikacji:
2002
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.67.Hc
78.55.Cr
Opis:
InAs quantum dots grown on GaAs substrate were investigated by optical spectroscopy. We particularly emphasized on the photoluminescence intensity, the stability of the photoluminescence intensity versus temperatures and wavelength of the InAs dot emission at various thermal treatments and different structures. We found that hydrogen can strongly passivate nonradiative centers without causing any structure degradation, and both n- and p-type modulation doping can reduce the decrease in the photoluminescence intensity when the sample temperature increases from the helium temperature to room temperature. The emission wavelength and the efficiency of the InAs quantum dots can also be manipulated by choosing proper materials of cap layer.
Źródło:
Acta Physica Polonica A; 2002, 102, 4-5; 567-576
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Digital control system design for bearingless permanent magnet synchronous motors
Autorzy:
Sun, X.
Shi, Z.
Yang, Z.
Wang, S.
Su, B.
Chen, L.
Li, K.
Powiązania:
https://bibliotekanauki.pl/articles/202311.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
BPMSMs
cyfrowy system kontroli
podwójnie zamknięty system regulacji prędkości
projektowanie oprogramowania
projekt sprzętu
digital control system
double-closed speed regulating system
software design
hardware design
Opis:
This study investigates a digital control system which is used in bearingless permanent magnet synchronous motors (BPMSMs). Compared with traditional permanent magnet synchronous motors, a BPMSM is characterized by higher speed and no mechanic friction. Therefore, the application value of the latter to the special area is higher than that of the former. An analysis from previous work on the BPMSM had proved its feasibility, and some performances such as suspension force, inductance and so on were also investigated. Based on this analysis, this study focuses on solving control problems in practical applications by designing a control system. The control system design includes overall schematic, hardware and software designs. Main software systems, including the force/current transform module and closed loop control module for radial displacement, are analyzed. Interface circuit for radial displacement, current feedback circuit and dead zone protection circuit are designed for the hardware system. Finally, several performance experiments have been conducted to verify the effectiveness of the designed digital control system. Experiment results indicate that the rotor has unique characteristics, such as stable suspension performance, good start-of-suspension performance, and rapid anti-disturbance features.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2018, 66, 5; 687-698
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Response of energy-size reduction to the control of circulating load in vertical spindle pulverizer
Autorzy:
Li, H.
He, Y.
Zhang, Y.
Ge, Z.
Xie, W.
Wang, S.
Li, K.
Powiązania:
https://bibliotekanauki.pl/articles/110803.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
circulating load control
response of energy-size reduction
mixture grinding
energy efficiency
Opis:
In the vertical spindle pulverizer (VSP), the large circulation ratio and high ash and sulfur contents in circulating load would result in intensive energy consumption and low grinding efficiency. Although the control of circulating load would help increase the energy efficiency, no quantitative study has been conducted due to the high temperature and pressure in the closed VSP. In this study, response of energy-size reduction to the control of circulating load was studied by the experimental simulation method. Coal mixtures with fine/coarse ratio of 11:1, 8:1 and 6:1 were ground by a lab-scale roller mill. Energy-size reductions of the coarse coal were compared to evaluate the influence of circulating load control. Results showed that the product with the coarse coal increased by 30% when the specific breakage energy was 1.0 kWht–1 as the circulation ratio decreased from 11 to 6. Meanwhile, a breakage characteristic index of the coarse coal was two times higher due to the cushioning effect of fines. Besides, decrease of circulation ratio led to increase of the breakage rate of coarse coal, and the energy saving improved by 57%. With the same energy input of 2.0 kWht-1, the yield of –0.09 mm pulverized fuel (PF) increased from 22 to 43%. Therefore, controlling the circulating load is an effective method to improve the breakage rate of coarse coal and energy efficiency for PF generation.
Źródło:
Physicochemical Problems of Mineral Processing; 2017, 53, 2; 793-801
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of porcine epidemic diarrhea virus infection on Toll-like receptor expression and cytokine levels in porcine intestinal epithelial cells
Autorzy:
Wang, F.
Wang, S.Q.
Wang, H.F.
Wu, Z.C.
Bao, W.B.
Wu, S.L.
Powiązania:
https://bibliotekanauki.pl/articles/2087351.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pig
porcine epidemic diarrhea virus
TLRs
innate immunity
Źródło:
Polish Journal of Veterinary Sciences; 2020, 23, 1; 119-126
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cloning and expression analysis of LeTIR1 in tomato
Autorzy:
Qiao, Y.
Feng, X.-M.
Liu, Z.-Z.
Wang, S.-S.
Hao, Y.-J.
You, C.-X.
Powiązania:
https://bibliotekanauki.pl/articles/19481.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
The full-length cDNA of LeTIR1 gene was isolated from tomato with EST-based in silico cloning followed by RACE amplification. LeTIR1 contained an open reading frame (ORF) 1872 bp long, encoding 624 amino acid residues. The predicted protein LeTIR1 had one F-box motif and eleven leucine-rich repeats (LRRs), all of which are highly conserved in TIR1 proteins of other plant species. Phylogenetic analysis showed that the LeTIR1 protein shared high similarity with other known TIR1 proteins. Both sequence and phylogenetic analysis suggested that LeTIR1 is a TIR1 homologue and encodes an F-box protein in tomato. Semi-quantitative RT-PCR indicated that LeTIR1 was expressed constitutively in all organs tested, with higher expression in stem than root, leaf, flower and fruit. Its expression level was positively correlated with the auxin distribution in stem or axillary shoot, and was induced by spraying exogenous IAA.
Źródło:
Acta Biologica Cracoviensia. Series Botanica; 2011, 53, 2
0001-5296
Pojawia się w:
Acta Biologica Cracoviensia. Series Botanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sire pedigree error estimation and sire verification of the Taiwan dairy cattle population by using SNP markers
Autorzy:
Chao, C.H.
Yeh, Y.H.
Chen, Y.M.
Lee, K.H.
Wang, S.H.
Lin, T.Y.
Powiązania:
https://bibliotekanauki.pl/articles/16539078.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
Holstein cattle
genetic testing
sire pedigree
Opis:
Information regarding the correct pedigree of and relationship between animals is useful for managing dairy breeding, reducing inbreeding, estimating breeding value, and establishing correct breeding programs. Additionally, the successful implementation of progeny testing is crucial for improving the genetics of dairy cattle, which depends on the availability of correct pedigree information. Incorrect pedigree information leads to bias in bull evaluation. In this study, Neogen GeneSeek Genomic Profiler (GGP) 50K SNP chips were used to identify and verify the sire of Taiwanese Holstein dairy cattle and analyze the reasons that lead to incorrect sire records. Samples were collected from 2,059 cows of 36 dairy farms, and the pedigree information was provided by breeders. The results of sire verification can be divided into three categories: submitted unconfirmed sire, submitted confirmed sire, and incorrectly submitted verified sire. Data on the sires of 1,323 (64.25%) and 572 (27.78%) dairy cows were verified and discovered, respectively. Sires of 1,895 (92.03%) dairy cattle were identified, which showed that the paternal pedigree of dairy cattle could be discovered and verified through genetic testing. An error-like analysis revealed that the data of 37 sires were incorrectly recorded because the bull’s NAAB code number was incorrectly entered into the insemination records: for 19 sires, the wrong bull was recorded because the frozen semen of a bull placed in the wrong storage tank was used, 6 had no sire records, and for 12 sires, the NAAB code of the correct bull was recorded but with a wrong stud code, marketing code, or unique number for the stud or breed. To reduce recorded sire error rates by at least 27.78%, automated identification of the mated bull must be adopted to reduce human error and improve dairy breeding management on dairy farms.
Źródło:
Polish Journal of Veterinary Sciences; 2022, 25, 1; 61-65
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Studies on Charging Operation of a Compact Repetitive Tesla Transformer
Autorzy:
Zhang, Z.
Zhang, J.
Yang, H.
Qian, B.
Meng, Z.
Li, D.
Wang, S.
Cao, Y.
Zhou, W.
Powiązania:
https://bibliotekanauki.pl/articles/1807860.pdf
Data publikacji:
2009-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
84.30.Ng
84.30.Jc
84.30.Qi
84.70.+p
Opis:
Charging operations of a compact Tesla transformer were experimentally investigated, in single-shot and rep-rate (50 pps for 1 s) modes, respectively. The charging limitations were also explored. The experimental results were compared and analyzed. The maximum secondary charging voltages of the Tesla transformer were measured to be 380 kV and 300 kV in single-shot and rep-rate modes, respectively. The RMS pulse-to-pulse instability of the secondary charging voltage is generally less than 10% but increases with the increasing initial voltage across the primary capacitor. Since the secondary capacitor of the Tesla transformer is a pulse forming line (PFL), continued operation is possible if there is breakdown in the PFL. Furthermore, operation can even be continued under occasional breakdown for some pulses, without the effects on the operations of subsequent pulses.
Źródło:
Acta Physica Polonica A; 2009, 115, 6; 973-975
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Bending, Impact Fracture Behavior and Characteristics of Stainless Steel Clad Plates with Different Rolling Temperature
Autorzy:
An, Q.
Fan, K. Y.
Ge, Y. F.
Liu, B. X.
He, J.
Wang, S.
Chen, C. X.
Ji, P. G.
Tolochko, O.
Powiązania:
https://bibliotekanauki.pl/articles/2049433.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
stainless steel clad plate
interface characteristics
bending behavior
impact morphologies
delamination crack
Opis:
The interface characteristics, bending and impact behavior, as well as fracture characteristics of stainless steel clad plates fabricated by vacuum hot rolling at different rolling temperatures of 1100°C, 1200°C and 1300°C are investigated in detail. The interface bonding strength is gradually increased with the increasing rolling temperature due to the sufficient diffusion behavior of alloy element. The bending toughness and impact toughness are gradually decreased, while the bending strength increase with the increase of the rolling temperature, which is attributed to mechanisms of matrix softening and interface strengthening at high rolling temperature. Due to the weak interface at 1100°C, the bending and impact crack propagation path was displaced by delamination cracks, which in turn lead to reduction in stress intensity of the main crack, playing an effective role in toughening the stainless steel clad plates. Moreover, the impact fracture morphologies of clad plates show a typical ductile-brittle transition phenomenon, which is attributed to the matrix softening behavior with the increasing rolling temperature.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 1; 229-239
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of CCHP in deep mine thermal hazard control
Zastosowanie systemu trójgeneracji w systemie kontroli zagrożeń termicznych w kopalni głębinowej
Autorzy:
Yang, D. D.
Wang, B. S.
Zhou, S. G.
Qin, R. X.
Powiązania:
https://bibliotekanauki.pl/articles/348684.pdf
Data publikacji:
2012
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
system trójgeneracji
kopalnia o wysokiej metanowości
kontrola zagrożeń cieplnych
chłodzenie absorpcyjne
CCHP
high gas mine
thermal hazard control
absorption refrigeration
Opis:
Due to the characteristics of high gas, high geothermal temperature and high strength development in Huainan mine area, thermal hazard problem has become more and more serious and also affects safety and productivity in coal mine. The CCHP (combined cooling heating and power), as a new mode to control thermal hazard, is put forward after advantages and disadvantages of all kinds of cooling methods are investigated. The CCHP method not only takes full advantage of gas but also reduces the greenhouse gas emission. At the same time, the application of CCHP remits the pressure of the power supply in summer, providing guarantee for safe and high efficiency exploitation.
W związku z wysoką gazonośnością, wysoką temperaturą pierwotną górotworu i wysokimi wartościami zawartości metanu w kopalni Huainan zaobserwowano zagrożenia natury cieplnej, wpływające również na bezpieczeństwo i wydajność produkcji w kopalni. Po zbadaniu wad i zalet różnych metod klimatyzacji podjęto decyzję o wprowadzeniu systemu trójgeneracji jako nowego sposobu kontroli zagrożeń natury cieplnej. Metoda trójgeneracji nie tylko wykorzystuje pełen potencjał ujętego gazu, ale również pozwala obniżyć emisję gazów cieplarnianych. Zastosowanie tego systemu zmniejsza ponadto pobór energii zasilającej w porze letniej, dając gwarancję bezpiecznej i wydajnej eksploatacji kopalni.
Źródło:
AGH Journal of Mining and Geoengineering; 2012, 36, 3; 443-451
1732-6702
Pojawia się w:
AGH Journal of Mining and Geoengineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multivariate statistical analysis of water quality and phytoplankton characteristics in Daya Bay, China, from 1999 to 2002
Autorzy:
Wang, Y.S.
Lou, Z.P.
Sun, C.C.
Wu, M.L.
Han, S.H.
Powiązania:
https://bibliotekanauki.pl/articles/48049.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
South China Sea
water quality
China
phytoplankton
Daya Bay
multivariate statistical analysis
Opis:
This study analyzed seasonal physicochemical and phytoplankton data collected at 12 marine monitoring stations in Daya Bay from 1999 to 2002. Cluster analysis based on water quality and phytoplankton parameters measured at the 12 stations could be grouped into three clusters: cluster I – stations S1,S2 , S7 and S11 in the southern part and the north-eastern part of Daya Bay; cluster II – stations S5, S6,S9 ,S1 0 and S12 in the central and north-eastern parts of Daya Bay; cluster III – stations S3,S 4 and S8 in the cage culture areas in the south-western part of Daya Bay and in the north-western part of the Bay near Aotou harbor. Bivariate correlations between phytoplankton density and the major physical and nutrient factors were calculated for all stations. Factor analysis shows that there were high positive loadings of pH,T IN and the ratio of TIN to PO4-P in the three clusters, which indicates that all the stations in the three clusters were primarily grouped according to their respective nutrient conditions.
Źródło:
Oceanologia; 2006, 48, 2
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Using chemometrics to identify water quality in Daya Bay, China
Autorzy:
Wu, M.-L.
Wang, Y.-S.
Sun, C.-C.
Wang, H.
Lou, Z.-P.
Dong, J.-D.
Powiązania:
https://bibliotekanauki.pl/articles/49096.pdf
Data publikacji:
2009
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
robust principal component analysis
water quality
chemometrics
China
cluster analysis
Daya Bay
Opis:
In this paper, chemometric approaches based on cluster analysis, classical and robust principal component analysis were employed to identify water quality in Daya Bay (DYB), China. The results show that these approaches divided water quality in DYB into two groups: stations S3, S8, S10 and S11 belong to cluster A, which lie in Dapeng Cove, Aotou Harbor and the north-eastern part of DYB, where water quality is related mainly to anthropogenic activities. The other stations belong to cluster B, which lie in the southern, central and eastern parts of DYB, where the quality is related mainly to water exchange with the South China Sea. Cluster analysis yields good results as a first exploratory method for evaluating spatial difference, but it fails to demonstrate the relationship between variables and environmental quality on the one hand and the untreated data on the other. However, with the aid of suitable chemometric approaches, the relationship between samples or variables can be investigated. Classical and robust principal component analysis can provide a visual aid for identifying the water environment in DYB, and then extracting specific information about relationships between variables and spatial variation trends in water quality.
Źródło:
Oceanologia; 2009, 51, 2; 217-232
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Decomposition Kinetics of Hexanitrohexaazaisowurtzitane/Ammonium Perchlorate
Autorzy:
Zhu, Y.-L.
Wang, K.-K.
Shan, M.-X.
Zheng, X.-D.
Jiao, Q.-J.
Wang, J.-S.
Powiązania:
https://bibliotekanauki.pl/articles/358067.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
hexanitrohexaazaisowurtzitane
ammonium perchlorate
thermal analysis
thermal decomposition kinetics
Opis:
The thermal decomposition kinetics of hexanitrohexaazaisowurtzitane/ ammonium perchlorate (HNIW/AP) have been investigated by thermogravimetrydifferential scanning calorimetry-mass spectrometry (TG-DSC-MS) simultaneous analysis. TG showed that there were three weight loss processes for the thermal decomposition of the HNIW/AP mixture. The first was ascribed mainly to the thermal decomposition of HNIW, while the second and third were assigned to that of AP. The presence of AP has little effect on the thermal decomposition process of the HNIW component. The apparent activation energy of the thermal decomposition of the HNIW component, calculated by the Kissinger method, was little changed compared to that of neat HNIW. The addition of HNIW to AP caused the onset and end temperatures of the thermal decomposition to be decreased and the decomposition process to be shortened. The high-temperature and lowtemperature decomposition processes of AP became blurred in the presence of HNIW, and this was supported by the MS results.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 1; 149-159
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies