Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Wang, B." wg kryterium: Autor


Tytuł:
Underwater target direction of arrival estimation by small acoustic sensor array based on sparse bayesian learning
Autorzy:
Wang, B.
He, C.
Powiązania:
https://bibliotekanauki.pl/articles/260588.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
DOA
underwater acoustic signal processing
sparse Bayesian learning
temporally correlated source
Opis:
Assuming independently but identically distributed sources, the traditional DOA (direction of arrival) estimation method of underwater acoustic target normally has poor estimation performance and provides inaccurate estimation results. To solve this problem, a new high-accuracy DOA algorithm based on sparse Bayesian learning algorithm is proposed in terms of temporally correlated source vectors. In novel method, we regarded underwater acoustic source as a first-order auto-regressive process. And then we used the new algorithm of multi-vector SBL to reconstruct the signal spatial spectrum. Then we used the CS-MMV model to estimate the DOA. The experiment results have shown the novel algorithm has a higher spatial resolution and estimation accuracy than other DOA algorithms in the cases of less array element space and less snapshots.
Źródło:
Polish Maritime Research; 2017, S 2; 95-102
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis and Modelling on Radiated Noise of a Typical Fishing Boat Measured in Shallow Water Inspired by AQUO Project’s Model
Autorzy:
Peng, Z.
Fan, J.
Wang, B.
Powiązania:
https://bibliotekanauki.pl/articles/177092.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
radiated noise
South China Sea
predicted model
shallow water
transmission loss
Opis:
The shipping noise near channels and ports is an important contribution to the ambient noise level, and the depth of these sites is often less than 100 m. However less attention has been paid to the measurement in shallow water environments (Brooker, Humphrey, 2016). This paper presents extensive measurements made on the URN (underwater radiated noise) of a small fishing boat in the South China Sea with 87 m depth. The URN data showed that the noise below 30 Hz was dominated by the background noise. The transmission loss (TL) was modelled with FEM (finite element method) and ray tracing according to the realistic environmental parameters in situ. The discrepancy between the modelled results and the results using simple law demonstrates both sea surface and bottom have significant effect on TL for the shallow water, especially at low frequencies. Inspired by the modelling methodology in AQUO (Achieve QUieter Oceans) project (Audoly et al., 2015), a predicted model applied to a typical fishing boat was built, which showed that the URN at frequencies below and above 100 Hz was dominated by non-cavitation propeller noise and mechanical noise, respectively. The agreement between predicted results and measured results also demonstrates that this modelling methodology is effective to some extent.
Źródło:
Archives of Acoustics; 2018, 43, 2; 263-273
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of Titanium dioxide nanotube photo-electrodes in different electrolyte mixtures and the impacts on their characteristics and photo-catalytic abilities under visible light
Autorzy:
Liu, M-T.
Zhang, J.
Wang, B.
Powiązania:
https://bibliotekanauki.pl/articles/780075.pdf
Data publikacji:
2017
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
TiO2
anodizing
electrolytes
Nanotube arrays
photo-catalysis
water pollution
water treatments
Rhodamine B
Opis:
TiO2  nanotube arrays were fabricated using electrochemical anodization of titanium foils, where different types of electrolytes were tested to determine conceptual choice for nanotubes fabrication. These electrolytes are 1M (NH4)2SO4  containing 0.5% wt NH4F, 1M Na2SO4  containing 0.5% wt NH4F, 1M NaF containing 0.5% wt (NH4)2SO4  and a mixture of water: ethylene glycol 1:9 containing 0.5% wt NH4F. The foils were marked as EG type (Ethylene Glycol), AS type (Ammonium sulfate), SS type (sodium sulfate) and SF type (sodium fluoride). The photocatalytic capabilities and characterization of the fabricated NTAs were analyzed using SEM, XRD, and DRS. The degradation ratio of designated organic pollutants (Rhodamine B) was analyzed. The obtained results have proven that foils fabricated using Ethylene glycol have significant photocatalytic abilities, with a degradation ratio of EG-SS-SF-AS types being 80% to 85%, 70% to 80%, 70% to 75% and 52% to 55%, respectively.
Źródło:
Polish Journal of Chemical Technology; 2017, 19, 1; 34-40
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation and Up-conversion Luminescence of Yb3+/Er3+/GZO Ceramics
Autorzy:
Li, G.
Wang, B.
Wang, R.
Liu, H.
Powiązania:
https://bibliotekanauki.pl/articles/779137.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Up-conversion
Yb3+/Er3+/GZO
Ceramics
High purity
Luminescence
Opis:
Yb3+/Er3+/GZO ceramics have been synthesized with high temperature solid-state method. The phase and structure of the Yb3+/Er3+/GZO ceramics were characterized by X-ray diffraction (XRD). The XRD pattern that following ions Yb3+, Er3+ and Ga3+ were well doped into the ZnO lattice. Effi cient visible up-conversion (UC) red and green emission were observed under 980 nm excitation. The mechanism of the UC luminescence is investigated on the basis of the UC luminescence emission spectra, the power curve and energy level diagram. The infl uence of doping ions to the intensity ratio of red to green is analyzed and high purity of red light (red/green = 29.9) is fi nally obtained.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 3; 15-19
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pre-formulation Compatibility Studies of 5-Amino-1H-tetrazole Nitrate with Several Typical Materials by Thermal and Non-thermal Techniques
Autorzy:
Guo, W.
Han, Z.
Lin, Q.
Wang, B.
Powiązania:
https://bibliotekanauki.pl/articles/358375.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
5-ATN
compatibility
energetic materials
Opis:
The aim of the present study was to assess the physicochemical compatibility of a promising energetic salt, 5-amino-1H-tetrazole nitrate (5-ATN), with some typical materials. Thermal techniques (differential scanning calorimetry (DSC) and vacuum stability test (VST)) and non-thermal techniques (X-ray diffractometry (XRD) and Fourier Transform Infrared Spectroscopy (FTIR)) were applied. Five energetic materials (TNT, RDX, HMX, CL-20 and AP) and three common additives (Al, DOS and F2604-2) were tested to evaluate their compatibility with 5-ATN. Based on the DSC results, except for AP that was only partially compatible with 5-ATN, all of the selected materials exhibited good compatible with 5-ATN. The VST test further confirmed the compatibility of the 5-ATN/AP mixtures. Combined with the thermal methods, the FTIR results agreed with the DSC findings. The XRD results showed some differences.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 1; 100-114
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of sonar detection signal based on fractional Fourier transform
Autorzy:
Wang, B.
Tang, J.
Yu, F.
Zhu, Z.
Powiązania:
https://bibliotekanauki.pl/articles/259724.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
fractional Fourier transform
watermark
sonar
Opis:
Aiming at the source of underwater acoustic emission, in order to identify the enemy emission sonar source accurately. Using the digital watermarking technology and combining with the good time-frequency characteristics of fractional Fourier transform (FRFT),this paper proposes a sonar watermarking method based on fractional Fourier transform. The digital watermark embedding in the fractional Fourier transform domain and combined with the coefficient properties of the sonar signal in the fractional Fourier transform to select the appropriate watermark position. Using the different characteristics of the signals before and after embedding, an adaptive threshold was set for the watermark detection to realize the discrimination of sonar signals. The simulation results show the feasibility and has better resolution and large watermark capacity of this method, while the robustness of the watermark is better, and the detection precision is further improved.
Źródło:
Polish Maritime Research; 2018, S 2; 125-131
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Binary-phase metal-based sandwiched grating with high efficiency
Autorzy:
Wang, B.
Chen, L.
Lei, L.
Zhou, J.
Powiązania:
https://bibliotekanauki.pl/articles/174769.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
binary phase
metal layer
sandwiched grating
Opis:
We describe a novel high efficiency element based on a binary-phase metal-based sandwiched grating, where the binary grating is covered by a dielectric layer and connected by a metal slab on the fused-silica substrate. The modal method is used to optimize the grating duty cycle and period to analyze the feasibility to achieve high efficiency for TE and TM polarizations by effective indices of the modes excited in the grating region. Rigorous coupled-wave analysis (RCWA) is employed to optimize the grating depth and to cover the layer thickness accurately by numerical calculations. It is not easy for the conventional binary grating with a usual duty cycle to achieve high efficiency in the –1st order for TM polarization. For the binary-phase metal-based sandwiched grating, high efficiency can be diffracted into the –1st order for not only TE polarization but also TM polarization. Moreover, the wide fabrication tolerance, the wideband property and the flat surface of easy cleaning should be significant for practical applications in a variety of optical systems.
Źródło:
Optica Applicata; 2013, 43, 3; 607-613
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Polarization-selective beam splitter by a sandwiched grating
Autorzy:
Wang, B
Chen, L
Lei, L
Zhou, J
Powiązania:
https://bibliotekanauki.pl/articles/174875.pdf
Data publikacji:
2013
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
modal method
rigorous coupled-wave analysis (RCWA)
sandwiched grating
high efficiency
beam splitter
Opis:
We describe a polarization-selective beam splitter by a sandwiched grating, which can fulfill the high efficiency element for TE polarization and the two-port output for TM polarization. The modal method and the rigorous coupled-wave analysis (RCWA) are employed together to optimize the polarization-selective beam splitter. According to the modal method, the grating duty cycle and period are discussed to analyze the physical mechanism of such a dual-function element. Using RCWA, grating depth and thickness of the covering layer are accurately optimized to design such a polarization-selective beam splitter. With the optimized grating duty cycle, period, depth and covering layer thickness, TE polarization can be mainly diffracted in the –1st order and two-port output can be achieved for TM polarization in the 0th and the –1st orders. The polarization-selective beam splitter should be a useful element in a variety of applications with advantages of high efficiency, wideband property, and dual functions based on a sandwich grating.
Źródło:
Optica Applicata; 2013, 43, 2; s. 229-236
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of hollow glass microspheres on the properties of high silica glass fiber fabric/liquid silicone rubber composite sheet
Wpływ dodatku mikrosfer szklanych na właściwości kompozytów tkaniny z włókna kwarcowego z ciekłym kauczukiem silikonowym
Autorzy:
Chen, S.
Qin, Y.
Song, Y.
Wang, B.
Powiązania:
https://bibliotekanauki.pl/articles/946990.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
composite sheet
hollow glass microspheres
liquid silicone rubber
dynamic mechanical properties
thermal conductivity
arkusz kompozytowy
mikrosfery szklane
ciekły kauczuk silikonowy
właściwości dynamiczno-mechaniczne
przewodność cieplna
Opis:
In this study, high silica glass fiber fabric/liquid silicone rubber (HSGFF/LSR) composite sheet filled with hollow glass microspheres (HGM) was prepared. The effects of HGM content on the mechanical, thermal insulation and dynamic mechanical properties of the composite sheet were investigated. The results showed that the compatibility and interfacial properties between HGM and the matrix were improved after the HGM was treated with a silane coupling agent, KH550. Composite, in which the HGM content was 7 % by weight, shows the most advantageous mechanical, insulating and damping properties.
Na bazie tkaniny z włókien kwarcowych (HSGFF) nasyconej ciekłym kauczukiem silikonowym (LSR) otrzymywano kompozyty napełniane mikrosferami szklanymi (HGM). Badano wpływ dodatku mikrosfer na właściwości mechaniczne, izolacyjność cieplną i właściwości dynamiczno-mechaniczne kompozytowych arkuszy. Stwierdzono, że modyfikacja mikrosfer szklanych za pomocą silanowego czynnika sprzęgającego KH550 poprawiła kompatybilność i oddziaływania międzyfazowe cząsteczek HGM i nasyconej ciekłym kauczukiem tkaniny z włókien szklanych. Najkorzystniejsze właściwości mechaniczne, izolacyjne i tłumiące wykazywał kompozyt, w którym zawartość HGM wynosiła 7 % mas.
Źródło:
Polimery; 2018, 63, 3; 178-184
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Compatibility Study of 2,6-Diamino-3,5-dinitropyridine-1-oxide with Some Energetic Materials
Autorzy:
Li, X.
Wang, B.-L,
Lin, Q.-H.
Powiązania:
https://bibliotekanauki.pl/articles/358871.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
compatibility
energetic materials
ANPyO
Opis:
For the application of 2,6-diamino-3,5-dinitropyridine-1-oxide (ANPyO) in composite explosives, the compatibility of ANPyO with some energetic materials was studied by the use of differential scanning calorimetry (DSC), where the energetic materials were cyclotrimethylenetrinitramine (RDX), cyclotetramethylenetetranitramine (HMX), 3,4-dinitrofurazanfuroxan (DNTF), hexanitrohexazaisowurtzitane (CL-20), 2,4,6-trinitrotoluene (TNT), 2,4,6-triamino-1,3,5-trinitrobenzene (TATB), 3-nitro-1,2,4-triazol-5-one (NTO), 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105), 5-amino-1H-tetrazole nitrate (5-ATEZN), ammonium perchlorate (AP), potassium perchlorate (KP), aluminum powder (Al), boron powder (B), magnesium hydride (MgH2) and magnesium borohydride (Mg(BH4)2). The results showed that the binary systems of ANPyO/CL-20, ANPyO/NTO, ANPyO/5-ATEZN, ANPyO/Al, ANPyO/B, ANPyO/MgH2 and ANPyO/Mg(BH4)2 are compatible, and that the systems of ANPyO with RDX, LLM-105, HMX, AP and KP are sensitive, and with DNTF, TNT and TATB are incompatible.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 4; 978-988
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis, characterization of Hollandite Ag2Mn8O16 on TiO2 nanotubes and their photocatalytic properties for Rhodamine B degradation
Autorzy:
Thabit, M.
Liu, H.
Zhang, J.
Wang, B.
Powiązania:
https://bibliotekanauki.pl/articles/779645.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
Ag-MnO2/TiO2
Ag2Mn8O16
nanotubes
nanocrystals
Photoelectrode
electrochemical deposition
Rhodamine B
Photo-catalytic efficiency
Opis:
In this research Ag2 Mn8 O16  nanocrysls/TiO2 nanotubes, photoelectrodes were successfully prepared through anodization and annihilation steps, followed by electrodeposition of MnO2  and Ag in a three electrodes cell. The obtained photoelectrodes were dried, then annealed for crystallization, the morphology and structure of the fabricated electrodes were characterized via scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The light absorption and harvesting properties were investigated through UV–visible diffuse refl ectance spectrum (DRS), photocatalytic performances were evaluated by degradation of 50 mL of Rhodamine B (5 mg L–1 ) under Xenon light irradiation for 2 h. Results illustrated that the fabricated photoelectrodes show remarkable photo-degradation properties of organic pollutants in aqueous mediums.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 2; 85-91
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative Theoretical Investigation on Energetic Substituted Furazanyl Ethers
Autorzy:
Liu, N.
Wang, K.
Shu, Y.
Zeman, S.
Wang, B.
Wang, W.
Powiązania:
https://bibliotekanauki.pl/articles/358622.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
furazanyl ethers
heats of formation
bond dissociation energy
detonation performance
melting point
Opis:
Furazanyl ether has great potential to be an important candidate as a casting explosive and energetic plasticizer. The density functional theory (DFT) method was used to investigate the heats of formation (HOFs), molecular stability, detonation performance and melting point of a series of substituted furazanyl ethers at B3LYP/6-311G(d,p) level. The results show that the introduction of –N3 or –N(O)=N– groups significantly improves the HOFs values of the derivatives. The bond dissociation energies (BDEs) were analyzed, showing that the N–O bond in the furazan ring is the weakest for most compounds and the ring is vulnerable to cleavage in thermal decomposition. The calculation of density, detonation velocities and detonation pressures suggests that the substitution of –NF2, –CF(NO2)2, furoxan or –N(O)=N– group is an effective method for enhancing their detonation performance. The melting points were determined according to the variation of specific heat capacity, and good estimates were obtained in comparison with the available experimental data. Taking into account the detonation performance and melting point, four compounds are favoured for application in melt cast explosive or energetic plasticizers.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 1; 47-71
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical touch responses of Arabidopsis TCH1-3 mutant roots on inclined hard-agar surface
Autorzy:
Zha, G.
Wang, B.
Liu, J.
Yan, J.
Zhu, L.
Yang, X.
Powiązania:
https://bibliotekanauki.pl/articles/24565.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
mechanical touch response
mechanical touch simulation
Arabidopsis
TCH1-3 gene
mutant
root growth
Źródło:
International Agrophysics; 2016, 30, 1
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Parameter calibration for the discrete element simulation model of commercial organic fertilizer
Autorzy:
Xie, C.
Yang, J.
Wang, B.
Zhuo, P.
Li, C.
Wang, L.
Powiązania:
https://bibliotekanauki.pl/articles/2082983.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
commercial organic fertilizer
discrete element
repose angle
parameter calibration
parameters for the particle
model
Opis:
The parameters of a discrete element simulation model for commercial organic fertilizer particles were obtained both quickly and accurately, so that the uniformity and stability of the fertilizer discharged from the feeder may be studied using the discrete element simulation method. This study screened out the parameters which significantly influenced the repose angle of the commercial organic fertilizer using the Plackett-Burman test. Then, a model for the quadratic regression response surface of the repose angle vs the parameters was established through a Box-Behnken experiment with the measured repose angle of the fertilizer particles as the optimization index. The optimization results showed that the rolling friction coefficient and static friction coefficient between the fertilizer particles, as well as the optimal simulation parameter for the Johnson-Kendall-Roberts surface energy were 0.056, 0.355 and 0.011 J m-2, respectively. A discrete element simulation test was carried out with the optimal simulation parameters, and the repose angle error of the simulation test was found to be 0.40% relative to that of the physical test, which proved the accuracy and validity of the simulation parameters for the discrete element model of the organic fertilizer. The simulation results may provide the basic parameters for establishing a discrete element model of commercial organic fertilizer particles and investigating the performance of organic fertilizer feeders using the simulation method.
Źródło:
International Agrophysics; 2021, 35, 1; 107-117
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Highly-efficient three-port output by metal-mirror-based grating
Autorzy:
Li, H.
Wang, B.
Shu, W.
Chen, L.
Lei, L.
Zhou, J.
Powiązania:
https://bibliotekanauki.pl/articles/174526.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
three-port output
metal-mirror-based grating
rigorous coupled-wave analysis
Opis:
A highly-efficient three-port output of metal-mirror-based grating is proposed in this paper. The metal-mirror-based grating can function as a beam splitter which can diffract the normal incident wave into the 0th and the +/- 1st orders for both TE and TM polarizations with the usual duty cycle of 0.5. The analysis of the grating parameters can be optimized by rigorous coupled-wave analysis. The high efficiency for TE and TM polarizations shall be realized. By means of the numerical simulation, the depth and connecting layer thickness of grating can be accurately calculated. The efficiency of per port is near 33.3%, so the novel three-port output grating with a connecting layer would be an excellent optical element.
Źródło:
Optica Applicata; 2016, 46, 1; 87-92
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies