Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Sun, X" wg kryterium: Autor


Tytuł:
Pre-concentration of graphite and LiCoO2 in spent lithium-ion batteries using enhanced gravity concentrator
Autorzy:
Zhu, X,-N.
Tao, Y.-J.
He, Y.-Q.
Zhang, Y.
Sun, Q.-X.
Powiązania:
https://bibliotekanauki.pl/articles/109609.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
spent lithium-ion batteries
electrode material
resource utilization
pre-concentration
enhanced gravity concentrator
Opis:
The pre-concentration of electrode material of spent lithium-ion battery has great significance on the resource utilization and environmental protection. The feasibility of separation of graphite and LiCoO2 based on density difference using the enhanced gravity concentrator was verified in this paper. Combustion characteristics of LiCoO2 and graphite were used to propose a simple evaluation index of separation efficiency. Separation tests were carried out to specify the influence of operating parameters on the separation efficiency. Moreover, the effect of particle size on the separation performance was studied. Combustion characteristics results showed that mass loss of graphite was much greater than that of LiCoO2. Thus, mass loss were used to evaluate the purity of product. Effective separation of graphite and LiCoO2 was achieved by the enhanced centrifugal separator. Separation results showed that increasing centrifugal force decreased the overflow yield and increased the graphite content of the overflow stream. In addition, yield of overflow grew an increase in fluidization water pressure, while the purity of graphite in overflow decreased. The effect of particle size on the separation efficiency was also significant, the separation efficiency decreased with the decreasing of particle size.
Źródło:
Physicochemical Problems of Mineral Processing; 2018, 54, 2; 293-299
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Deashing and desulphurization of fine oxidized coal by falcon concentrator and flotation
Autorzy:
Zhu, X.
Tao, Y.
Sun, Q.
Man, Z.
Xian, Y.
Powiązania:
https://bibliotekanauki.pl/articles/951856.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
fine oxidized coal
desulphurization
deashing
flotation
enhanced gravity separation
Opis:
Flotation and enhanced gravity separation based on different separation principles were carried out to investigate the desulphurization and deashing efficiency of fine oxidized coal. Surface properties of fresh and oxidized coals were tested by XPS and results showed that the contents of hydrophobic functional groups decreased while the content of hydrophilic functional groups increased after oxidization. Floatability and density analysis results showed that the floatability of coal samples decreased sharply because of oxidation, however, density composition of coal sample only had slight changes. Separation results showed that yields of gravity concentrates outclassed that of flotation concentrates, meanwhile, ash contents and sulfur contents of gravity concentrates were far lower than that of flotation concentrates. Yields and ash contents increased with the collector dosage and achieved to be 17.83 and 26.94% respectively when the collector dosage was 1600 g•Mg-1. Yields and ash contents of gravity concentrates decreased with the centrifugal force and increased with the recoil water flow with similar sulfur content. Clean coal with yield of 53.86%, ash content of 9.81%, sulfur content of 1.47% and with a corresponding desulphurization efficiency of 44.53% was achieved at centrifugal force of 107 g and recoil water flow of 13.3 dm3•min-1. For fine oxidized coal, enhanced gravity separation has a significant advantage of the separation efficiency compared with flotation.
Źródło:
Physicochemical Problems of Mineral Processing; 2016, 52, 2; 634-646
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Network resource reallocation strategy based on an improved capacity-load model
Strategia realokacji zasobów sieciowych oparta o udoskonalony model przepustowości-obciążenia
Autorzy:
Zhou, J.
Huang, N.
Sun, X.
Xing, L.
Zhang, S.
Powiązania:
https://bibliotekanauki.pl/articles/300643.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
network reliability
maintenance
resource reallocation
cascading failures
capacity-load relationship
niezawodność sieci
utrzymanie ruchu
realokacja zasobów
awarie kaskadowe
zależność przepustowość
obciążenie
Opis:
Network resource reallocation is a common way to help restore performance of network systems subject to cascading failures. Majority of current network resource allocation strategies either give little regard to or make impractical assumptions about the relationship between capacity and load of network nodes, despite this relationship is closely related to the propagation of network failures. In this work we present and verify an improved nonlinear network capacity-load model based on the actual relation between network capacity and load. According to the verified model and realistic dynamic characteristics of network loads, we propose a new network resource reallocation strategy for networks under attacks from the perspective of maintenance. The strategy aims to effectively reallocate new capacity to network nodes after cascading failures occur. Both theoretical analysis and empirical studies are performed on three typical types of complex networks. Results show that the proposed network resource reallocation strategy is more efficient in mitigating devastating impact of cascading failures on network performance, in comparison to other three existing network resource reallocation strategies.
Realokacja zasobów sieci jest powszechnym sposobem, stosowanym w celu przywrócenia działania systemów sieciowych objętych awariami kaskadowymi. Większość współczesnych strategii alokacji zasobów sieciowych kładzie mały nacisk lub czyni niepraktyczne założenia dotyczące zależności między przepustowością i obciążeniem węzłów sieci, choć zależność ta jest ściśle związana z rozchodzeniem się awarii sieci. W niniejszej pracy przedstawiono i zweryfikowano udoskonalony nieliniowy model przepustowości-obciążenia sieci na podstawie rzeczywistej relacji między przepustowością sieci i jej obciążeniem. Na podstawie zweryfikowanych modelu i realistycznych cech dynamicznych obciążeń sieciowych, proponujemy nową strategię realokacji zasobów dla sieci poddawanych atakom z perspektywy utrzymania ruchu. Celem strategii jest skuteczna realokacja nowej przepustowości węzłom sieci po wystąpieniu kaskadowych awarii. Przeprowadzono zarówno teoretyczne analizy, jak i badania empiryczne na trzech typowych rodzajach sieci złożonych. Wyniki pokazują, że proponowana strategia realokacji zasobów sieci jest bardziej skuteczna w zwalczaniu niszczącego wpływu kaskadowych awarii na przepustowość sieci w porównaniu do pozostałych trzech wykorzystywanych strategii realokacji zasobów sieciowych.
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 4; 487-495
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The study on bactericidal effect and ultrastructural alterations of chlorocresol nanoemulsion disinfectant against Staphylococcus aureus
Autorzy:
Zhang, Y.F.
Sun, Y.W.
Liu, X.H.
An, Z.X.
Yang, X.F.
Powiązania:
https://bibliotekanauki.pl/articles/16647452.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
chlorocresol
nanoemulsion
disinfectant
Staphylococcus aureus
bactericidal effect
ultrastructure
Opis:
Chlorocresol nanoemulsion disinfectant (CND) is an environmental disinfectant prepared with nanoemulsion as its drug carrier. This study aimed to investigate the bactericidal effect of CND on Staphylococcus aureus ( S. aureus) and its effect on bacterial ultrastructure. The neutralizing effect of CND against S. aureus was first screened by suspension quantitative evaluation experiment procedure of neutralizer. Disinfection performance was evaluated by the determination of Minimal Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC), quantitative bactericidal experiment, and comparative experiment of disinfection performance between 0.1% CND and 0.1% chlorocresol aqueous solution. Meanwhile, the effect of CND on the ultrastructure of S. aureus was investigated with scanning electron microscope (SEM) and transmission electron microscope (TEM) to preliminarily explore the bactericidal mechanism. The results showed that 3% Tween-80 in PBS could be screened as the neutralizer of CND against S. aureus. MIC and MBC were 100 μg/mL and 200 μg/mL, respectively. The bactericidal rates were all 100% when 0.06% and 0.08% disinfectant acted for 15 and 5 min, respectively. Furthermore, compared with 0.1% chlorocresol aqueous solution, the bactericidal effect of 0.1% CND was significantly enhanced (p<0.01). After treatment with CND for 10 min, SEM observation showed that the morphology of S. aureus cells were changed and the integrity destroyed. TEM observation showed that the cell shape changed, and the structures of the cell wall, cell membrane and cytoplasm were damaged in varying degrees. CND showed the strong bactericidal effect on S. aureus and could cause ultrastructure alterations of S. aureus.
Źródło:
Polish Journal of Veterinary Sciences; 2023, 26, 1; 13-20
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A polarization filter at 1550 nm based on photonic crystal fiber with symmetry around gold-coated holes
Autorzy:
Zha, F.
Li, J.
Sun, P.
Wang, X.
Powiązania:
https://bibliotekanauki.pl/articles/173897.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
photonic crystal fiber
polarization filter
finite element method
surface plasmon resonance
Opis:
A polarization photonic crystal fiber based on surface plasmon resonance is proposed in this paper. The photonic crystal fiber with gold coated holes is studied through using the finite element method. The impacts of structural parameters on the resonance characteristics are discussed. Numerical simulations show that the resonance wavelength can be modulated by changing the parameters of the air holes and thickness of gold layer. At the resonance wavelength 1550 nm, the loss is 3.8045 dB/m in x-polarization and the loss is 28464 dB/m in y-polarization by adjusting the size of the gold-coated holes and the place of air holes. Results show that the loss of y-polarized mode is much larger than the loss of x-polarized mode. The y-polarized mode is suppressed, and only x-polarized mode can be guided at the resonance wavelength of y-polarized mode. The results indicate that the mode polarized in one direction can be filtered out selectively by adjusting the diameter of air holes, and the filtering effect in a communication band is achieved.
Źródło:
Optica Applicata; 2018, 48, 4; 609-620
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Physical purification of diatomite based on laminar-flow centrifugal separation
Autorzy:
Yang, X.
Sun, Z.
Zheng, S.
Powiązania:
https://bibliotekanauki.pl/articles/109881.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
diatomite
physical purification
laminar-flow centrifugal separation
response surface experiment
Opis:
Natural diatomaceous earth or diatomite of good quality becomes rare and a demand for it increases every year. In this paper, we develop a novel method based on laminar-flow centrifugal separation to purify mid- and low-grade diatomite for industrial production purposes. Effects of the drum cone angle, drum speed, feeding concentration, feeding flow rate and feeding time on separation were investigated experimentally. The interdependency of these variables was studied using a response surface experiment. Operating conditions of a laminar-flow centrifugal separator were further optimized. Results showed that the feeding flow rate had a great influence on a silicon dioxide content of diatomaceous in concentrate and tailing. The optimal separation results were achieved as 87.5 wt.%, of SiO2 content of diatomaceous in concentrate and 6.98 wt.% in tailing. The optimal operating conditions included the drum cone angle of 0.0087 rad, the drum speed of 89.62 rad/s, the feeding concentration of 24.66 wt.%, the feeding flow rate of 2.33×10–4 m3/s, and the feeding time of 90 s. A scanning electron microscopy (SEM) clearly indicated that the pore blockage on the surface of diatoms was cleared out. The variation about the breakage rate of diatom shells was lower than 5% through the pilot purification production line. The characterization of original diatomite and derived products after purification were determined by X-ray diffraction (XRD). The results indicated that the impurity content of purified diatomite was improved significantly.
Źródło:
Physicochemical Problems of Mineral Processing; 2014, 50, 2; 705-718
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Microstructural Evolution in HMX Based Plastic-bonded Explosive During Heating and Cooling Process: an in situ Small-angle Scattering Study
Autorzy:
Yan, G.
Tian, Q.
Liu, J.
Fan, Z.
Sun, G.
Zhang, C.
Wang, Y.
Chen, B.
Gong, J.
Zhou, X.
Yang, Z.
Nie, F.
Li, J.
Li, X.
Powiązania:
https://bibliotekanauki.pl/articles/358618.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
SANS
SAXS
HMX-PBX
thermal damages
phase transition
Opis:
The thermal damage in octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) based plastic-bonded explosive (PBX) was investigated using in situ small-angle neutron and X-ray scattering techniques. The microstructural evolution was quantitatively characterized by the model fitting parameters of total interfacial surface area (Sv) and void volume distribution. The Sv of HMX-PBX decreased markedly above 100 °C, indicating the movement of binder into the voids. After subsequent cooling to room temperature, the scattering intensity increased significantly with increasing storage time, and a new population of voids with average diameter of 20 nm was observed, accompanied by the gradual phase transition of HMX from δ- to β-phase. The experimental results implied that serious damage within the HMX-PBX was developed during storage after heating.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 4; 916-926
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dynamic Characteristic Analysis of the Needle Multi-linkage Mechanism in a Carpet Tufting Machine’s Driving System
Analiza charakterystyki dynamicznej mechanizmu napędzającego system igłowy w maszynie do produkcji dywanów
Autorzy:
Xu, Y.
Sun, Z.
Huang, S.
Sheng, X.
Chi, X.
Powiązania:
https://bibliotekanauki.pl/articles/232022.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
carpet tufting machine
needle multi-linkage mechanism
kinematic characteristics
dynamic characteristics
dywan
maszyna igłowa
mechanizm napędzający igły
analiza wektorowa
Opis:
In a typical carpet tufting machine, kinematic and dynamic characteristics of the needle multi-linkage mechanism are the important factors affecting the quality of the tufting carpet. For providing a rational basis for mechanism design and vibration characteristic analysis, a mathematical model of the needle multi-linkage mechanism is constructed using the complex vector analysis method. On the basis of the model, kinematic characteristic curves and dynamic characteristic curves of the needle multi-linkage mechanism are analyzed by simulation methods. Finally experimental validation of the alternating load dynamic characteristics is performed on the needle multi-linkage mechanism in a typical carpet tufting machine. The results prove the theoretical analysis validity of the needle multi-linkage mechanism.
W typowej maszynie wiążącej dywany charakterystyki kinematyczne i dynamiczne mechanizmu napędzającego układ igieł są bardzo ważnym czynnikiem określającym jakość wytwarzanych dywanów. Dla otrzymania racjonalnej podstawy dla projektowania mechanizmu i analizy charakterystyk wibracyjnych opracowano matematyczny model mechanizmu napędzającego igły. Przy opracowaniu modelu zastosowano metodę kompleksowej analizy wektorowej. Posłużyło to do otrzymania kinematycznych i dynamicznych krzywych przebiegu. Przebiegi te analizowano za pomocą metod symulacji. Następnie oceniono wyniki eksperymentalnie stosując typową maszynę do wytwarzania dywanów. Wyniki potwierdziły prawidłowość przyjętych teoretycznie zależności.
Źródło:
Fibres & Textiles in Eastern Europe; 2016, 3 (117); 103-109
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Soft Sensing Method Of LS-SVM Using Temperature Time Series For Gas Flow Measurements
Autorzy:
Xu, W.
Fan, Z.
Cai, M.
Shi, Y.
Tong, X.
Sun, J.
Powiązania:
https://bibliotekanauki.pl/articles/221824.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gas flow
soft sensor
support vector machine (SVM)
temperature time series
Opis:
This paper proposes a soft sensing method of least squares support vector machine (LS-SVM) using temperature time series for gas flow measurements. A heater unit has been installed on the external wall of a pipeline to generate heat pulses. Dynamic temperature signals have been collected upstream of the heater unit. The temperature time series are the main secondary variables of soft sensing technique for estimating the flow rate. A LS-SVM model is proposed to construct a non-linear relation between the flow rate and temperature time series. To select its inputs, parameters of the measurement system are divided into three categories: blind, invalid and secondary variables. Then the kernel function parameters are optimized to improve estimation accuracy. The experiments have been conducted both in the single-pulse and multiple-pulse heating modes. The results show that estimations are acceptable.
Źródło:
Metrology and Measurement Systems; 2015, 22, 3; 383-392
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of experimental infections of various Tembusu virus strains isolated from geese, ducks and chickens on ducklings
Autorzy:
Xu, T.
Huang, X.
Li, Y.
Liu, Q.
Liu, X.
Han, K.
Liu, Y.
Yang, J.
Zhao, D.
Bi, K.
Sun, W.
Powiązania:
https://bibliotekanauki.pl/articles/2087719.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
goose-derived
duck-derived
chicken-derived
Tembusu virus
pathogenicity
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 2; 389-396
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combustion Characteristics and Mechanism of Boron-based, Fuel-rich Propellants with Agglomerated Boron Powder
Autorzy:
Xu, H. -X.
Pang, W.-Q.
Guo, H.-W.
Zhao, F.-Q.
Wang, Y.
Sun, Z.-H.
Powiązania:
https://bibliotekanauki.pl/articles/358733.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
analytical chemistry
boron-based fuel-rich solid propellants
agglomerated boron powder
combustion performance
combustion mechanism
Opis:
In order to extend the burning rate of boron-based, fuel-rich solid propellants with agglomerated boron powder, the effects of the boron content, the AP content, and of the magnesium powder content, on the burning rate and pressure exponent have been studied systematically. It has been shown that when the AP content is constant, the burning rate of the propellants increases with an increase in the agglomerated boron content. Furthermore, the burning rate and pressure exponent increase with increasing the contents of AP and magnesium powder. By means of single colour frame amplification photography and combustion wave tests, the combustion mechanism of these propellants has been investigated. It has been shown that the flame of the propellants becomes brighter by increasing the AP content, the dT/dxcp and dT/dxgp of the propellant FR-5 being around 6815 and 5789 °C/mm respectively, higher than those of FR-4, resulting in greater burning rates. The Ts of these propellants is above 683 °C, which is higher than the decomposition peak temperatures of agglomerated boron powder and of propellants (about 649 °C), which indicates that agglomerated boron powder is partially oxidized on the combustion surface, and the heat released from it may be beneficial to the combustion of the propellants.
Źródło:
Central European Journal of Energetic Materials; 2014, 11, 4; 575-587
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of organohalogens in foodstuffs and environmental samples by neutron activation analysis and related techniques
Autorzy:
Xu, D.
Chai, Z.
Zhang, H.
Mao, X.
Ouyang, H.
Sun, H.
Powiązania:
https://bibliotekanauki.pl/articles/147259.pdf
Data publikacji:
2004
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
instrumental neutron activation analysis (INAA)
pine needle
foodstuff
extractable organohalogen
Opis:
Pine needles and foodstuffs collected from Beijing, China, were analyzed by instrumental neutron activation analysis (INAA) combined with organic solvent extraction for total halogens, extractable organohalogens (EOX) and extractable persistent organohalogens (EPOX). The INAA detection limits are 50 ng, 8 ng and 3.5 ng for Cl, Br and I, respectively. The contents and distribution patterns of organohalogens in these samples are reported. EOCl accounted for 0.013 0.016% and 1.6 2.7% of the total chlorine in yogurt and apples, respectively, which suggested that chlorine in foodstuffs mainly existed as inorganic species and non-extractable organochlorines. EOCl contents in pine needles and foodstuffs were noticeably higher than those of EOBr and EOI. For pine needles, yogurt and apples, 1.6 34%, 23 58% and 29 35% of EOCl remained as extractable persistent organochlorine (EPOCl), respectively. Pine needle containing higher EOCl contents in chemical industrial and traffic hub areas indicated that chemical industries and exhaust emission from vehicle were the main sources of organochlorines in the Beijing's air. The relative proportions of the known organochlorines (such as HCHs, DDTs, chlordanes, heptachlor, HCB and PCBs) to the total EOCl and EPOCl were 0.04 1.6% and 0.7 21.5%, respectively, which implied that the identity of species of a major portion of the EOCl and EPOCl measured in pine needles was unknown.
Źródło:
Nukleonika; 2004, 49, 3; 101-106
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A polarization selective beam splitter based on a subwavelength multisubpart profile grating structure
Autorzy:
Xiao, Y.
Huang, L.
Wu, H.
Sun, X.
Xiao, W.
Duan, J.
Powiązania:
https://bibliotekanauki.pl/articles/174760.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
diffraction and gratings
polarizing beam splitter
PBS
leaky-mode resonance
LMR
Opis:
In this study, a polarization selective beam splitter constructed by only a single layer subwavelength multisubpart profile grating is presented. Rigorous coupled-wave analysis is adopted to investigate the properties of the structure. It is shown that for a transverse electric polarized wave, the device demonstrates very high reflectivity (>97%) from 1.46 to 1.58 μm; and for a transverse magnetic polarized wave, at the wavelength of 1.55 μm, it exhibits about 50/50 beam ratio under normal incidence. To evaluate the response of the polarizing beam splitters under variation in structure parameters, we also investigated the fabrication tolerances of the device.
Źródło:
Optica Applicata; 2016, 46, 4; 665-672
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation, Structure and Kinetic Analysis of the Thermal Behavior of Some Energetic Salts of 3-Hydrazino-4-amino-1,2,4-triazole
Autorzy:
Wu, J. T.
Zhang, J. G.
Sun, M.
Yin, X.
Zhang, T. L.
Powiązania:
https://bibliotekanauki.pl/articles/358073.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
synthesis
crystal structure
thermal analysis
3-hydrazino-4-amino-1,2,4-triazole
energetic salts
Opis:
As a key research objective for low melting explosives and propellants, energetic salts have received worldwide attention. 3-Hydrazino-4-amino-1,2,4triazole (HATr) is an important high-nitrogen compound (73.65% N) with good stability. This paper focuses on the energetic salts which were formed between HATr and picric acid (PA) or 2,4,6-trinitroresorcinol (TNR). Single crystals of HATr·PA and HATr·TNR·H2O were grown and their crystal structures determined at low temperature. They both belong to the monoclinic system, P21/n space group. The thermal characteristics of the two target salts were investigated using DSC and TG-DTG. In addition, the non-isothermal decomposition kinetics, heats of combustion and sensitivity have also been investigated. The detonation pressures (P) and detonation velocities (D) of the salts have been calculated using the K-J equations. The results indicated that both salts have certain potential applications as gunpowder and propellant materials.
Źródło:
Central European Journal of Energetic Materials; 2013, 10, 4; 481-493
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
pUC18-CpG stimulates RAW 264.7 via TBK1-mediated pathway and presents adjuvanticity in mice
Autorzy:
Wu, J.
Chen, Q.
Xin, T.
Sun, Y.
Jia, H.
Hou, S.H.
Guo, X.Y.
Powiązania:
https://bibliotekanauki.pl/articles/2087554.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
adjuvant
CpG DNA
Echinococcus granulosus
TBK1
type I interferons
Źródło:
Polish Journal of Veterinary Sciences; 2019, 2; 195-201
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies