Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "R.I." wg kryterium: Autor


Tytuł:
Effects of long-term construction noise on health of adult female Wistar rats
Autorzy:
Zymantiene, J.
Zelvyte, R.
Pampariene, I.
Aniuliene, A.
Juodziukyniene, N.
Kantautaite, J.
Oberauskas, V.
Powiązania:
https://bibliotekanauki.pl/articles/32046.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
The aim of this study was to investigate the influence of long-term building construction noise from refurbishment, which including vibration, on some physiological parameters and histopathological changes of organs of Wistar rats. Twenty 12 month old female rats were divided into two groups: rats group I (n = 10) were exposed to long-term construction noise and rats group II (n = 10) were kept under normal noise level. Study results revealed that long-term construction noise from building refurbishment has an influence on body weight, haematological and some serum biochemical parameters affects caecal microbiota, and causes histopathological changes in the organs of adult female Wistar rats. It was noticed that rats in group I exihibited significantly higher mean values for total protein, albumin and lower values for glucose, AST, ALT, blood urea nitrogen, haematological and caecal microbiota parameters than rats in group II. The most common pathologies were determined in the kidney, liver and lungs. Other observed pathologies were lymphadenopathy, catarrhal inflammation of the intestines, spleen hyperplasia and mammary gland adenofibroma. Single cases were subcutaneous fibroma in the thoracic region, abortus with uterine inflammation and thymus hyperplasia with formation of cysts were found.
Źródło:
Polish Journal of Veterinary Sciences; 2017, 20, 1
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Membrane Fouling Effect During Nanofiltration of Wastewater from Dyeing Cellulose and Polyamide Fabrics
Zjawisko foulingu membran podczas nanofiltracji ścieków z barwienia włókien celulozowych i włókien poliamidowych
Autorzy:
Żyłła, R.
Sójka-Ledakowicz, J.
Kamińska, I.
Powiązania:
https://bibliotekanauki.pl/articles/234485.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
textile wastewater treatment
membrane fouling
membrane filtration
nanofiltration
oczyszczanie ścieków włókienniczych
zanieczyszczenia
membrany
filtracja membranowa
nanofiltracja
Opis:
The aim of research was to compare the parameters of nanofiltration of textile wastewater generated in two different dyeing processes. Tests were carried out for wastewater from dyeing cellulose fibres with direct and reactive dyes and from dyeing polyamide fibres with acid dyes. The applicability of selected nanofiltration membranes, including polysulfone, cellulose acetate and polyamide membranes, in the filtration of some wastewater streams was examined. Research was carried out to investigate the fouling of membranes during wastewater nanofiltration. During the filtration of the wastewater after reactive dyeing, a significant reduction in the process efficiency due to membrane fouling was observed. In the case of wastewater from the dyeing of polyamide fibres, a reduction in the process efficiency during the membrane operation did not occur at all or was very small.
Celem badań było porównanie parametrów nanofiltracji ścieków włókienniczych pochodzących z dwóch różnych procesów barwienia. Badania przeprowadzono dla ścieków pochodzących z barwienia włókien celulozowych barwnikami bezpośrednimi i reaktywnymi, oraz ścieków z procesów barwienia wyrobów z włókien poliamidowych barwnikami kwasowymi. W pracy sprawdzono możliwość zastosowania wybranych membran nanofiltracyjnych (w tym polisulfonowych, z octanu celulozy i poliamidowych) w procesie filtracji wybranych strumieni ścieków. Badania prowadzono pod kątem zjawiska foulingu membran w trakcie nanofiltracji ścieków. Podczas filtracji ścieków z barwienia reaktywnego zaobserwowano znaczne obniżenie wydajności procesu na skutek efektu foulingu membrany. W przypadku ścieków z barwienia włókien poliamidowych, zjawisko redukcji wydajności procesu w trakcie pracy membrany nie występowało, lub było niewielkie.
Źródło:
Fibres & Textiles in Eastern Europe; 2016, 6 (120); 225-233
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of sonication and silver nanoparticles doped on viscoelastic structure of agarose gel
Autorzy:
Żyła, G.
Stompor, M.
Kopańska, M.
Stagraczyński, R.
Fal, J.
Traciak, J.
Trybus, M.
Wolski, S.
Zawlik, I.
Cebulski, J.
Konefał-Janocha, M.
Cholewa, M.
Powiązania:
https://bibliotekanauki.pl/articles/1055020.pdf
Data publikacji:
2017-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
83.10.Tv
83.60.Df
83.80.Hj
62.20.F-
66.20.Ej
Opis:
The paper presents result of experimental measurements of viscoelastic properties of agarose gel after sonication and with silver nanoparticles doped. Researches were conducted using a HAAKE MARS 2 rheometer (Thermo Electron Corporation, Karlsruhe, Germany), with serrated plate-plate measuring geometry. Viscoelastic properties of samples were measured with oscillation tests at constant deformation rate 0.1%, and frequency 1 Hz in the temperature range from 278 to 348 K. It was presented that using the sonication before solidification of gel results in increases of the storage modulus and complex viscosity of the solidified gel. It was also presented that when silver nanoparticles are doped into agarose gel, storage modulus and complex viscosity start to decrease at lower temperature.
Źródło:
Acta Physica Polonica A; 2017, 132, 1; 152-154
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
PM10, PM25 and PM10 Indoor and Outdoor Concentrations and Chemical Composition in School Environment
Stężenia oraz skład chemiczny pyłu PM10, PM25 oraz PM10 w powietrzu wewnętrznym i zewnętrznym szkoły
Autorzy:
Zwoździak, A.
Sówka, I.
Skrzętowicz, M.
Worobiec, A.
Nych, A.
Zwoździak, J.
Grieken, R.
Powiązania:
https://bibliotekanauki.pl/articles/389676.pdf
Data publikacji:
2011
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
PM1.0
PM2.5
PM10
powietrze wewnętrzne i zewnętrzne
skład elementarny
PM10 indoor-outdoor particles
elemental composition
Opis:
Simultaneous daily indoor and outdoor measurements of PM1.0, PM2.5, PM10 have been conducted during winter season of 2009/2010 in the secondary school in Wroclaw, Poland. Aerosol samples were analysed for mass concentrations and elemental composition. The factor analysis was applied to identify possible emission sources of the PM1.0 fraction. Mean daily PM10 concentrations was 81 g/m3 indoors and 54 g/m3 outdoors. The corresponding means for PM2.5 and PM1.0 were 62 and 22 g/m3 indoors and 46 and 24 g/m3 outdoors. There were reported 90 % of days with daily mean exceeding the WHO AQG for PM2.5 – 25 g/m3. In many cases the I/O ratio was higher than 1.0, what means that there are some particles sources inside the school building, particularly for the fractions PM10 and PM2.5. The most abundant elements in the PM1.0 fraction were S, Cl and K. Zn and Pb were the dominant heavy metals. Combustion processes contributed to high concentrations of K, S, As, Cl and vehicular emission to Cu, Pb and Zn.
Jednoczesne pomiary stężeń pyłu PM1.0, PM2.5, PM10 w powietrzu wewnętrznym i zewnętrznym zostały przeprowadzone w szkole średniej we Wrocławiu w sezonie zimowym 2009/2010 roku. Pobrane próbki aerozolu analizowano pod względem wysokości stężenia masowego oraz składu pierwiastkowego. Analizę czynnikową wykorzystano do oceny źródeł pochodzenia cząstek frakcji PM1.0. W powietrzu wewnętrznym średnie dobowe stężenie PM10 wynosiło 81 g/m3, a zewnętrznym 54 g/m3. Odpowiednie średnie dla PM2.5 i PM1.0 wynosiły 62 i 22 g/m3 wewnątrz i 46 i 24 g/m3 na zewnątrz budynku. Na podstawie przeprowadzonych pomiarów odnotowano 90 % dni ze średnim dobowym stężeniem frakcji PM2.5 powyżej wartości zalecanej w wytycznych Światowej Organizacji Zdrowia, tj. 25 g/m3. W wielu przypadkach stosunek stężeń w powietrzu wewnętrznym (I) do stężeń w powietrzu zewnętrznym (O), tj. I/O, był większy od 1.0, co oznaczało istnienie źródeł pyłów wewnątrz budynku, a dotyczyło do przede wszystkim frakcji PM10 i PM2.5. We frakcji PM1.0 w największych koncentracjach pojawiały się S, Cl i K, a wśród metali ciężkich Zn i Pb. Procesy spalania miały największy udział w stężeniach K, S, As i Cl, natomiast motoryzacja w przypadku stężeń Cu, Pb i Zn.
Źródło:
Ecological Chemistry and Engineering. A; 2011, 18, 7; 933-940
1898-6188
2084-4530
Pojawia się w:
Ecological Chemistry and Engineering. A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Geomorphological settings of Polish research areas on Spitsbergen
Autorzy:
Zwoliński, Z.
Giżejewski, J.
Karczewski, A.
Kasprzak, M.
Lankauf, K. R.
Migoń, P.
Pękala, K.
Repelewska-Pękalowa, J.
Rachlewicz, G.
Sobota, I.
Stankowski, W.
Zagórski, P.
Powiązania:
https://bibliotekanauki.pl/articles/295146.pdf
Data publikacji:
2013
Wydawca:
Stowarzyszenie Geomorfologów Polskich
Tematy:
polar landform
polar geomorphology
glacial relief
postgalacial relief
Polish geomorphological research
Spitsbergen
Opis:
Paper described geomorphological characteristics of landform sets which occur on research areas investigated by Polish geomorphologists on Spitsbergen. These area involve four areas along the western coast of Spitsbergen, i.e. vicinities of the Kaffiøyra, the Werenskioldbreen, the Calypsostranda, and the Hornsund, as wel as one area located in the central part of Spitsbergen, i.e. vicinity of Billefjord with special emphasis on surroundings of the Petuniabkukta. Landforms are characterized in different morphogenetic terms, mainly glacial, peryglacial, deundational, slope, fluvial, even eolian factors and processes.
Źródło:
Landform Analysis; 2013, 22; 125-143
1429-799X
Pojawia się w:
Landform Analysis
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Shell Ocean Discovery XPRIZE Competition Impact on the Development of Ocean Mapping Possibilities
Autorzy:
Zwolak, K.
Zarayskaya, Y.
Wigley, R. A.
Lacerda, C.
Ketter, T.
Anderson, R.
Bazhenova, E.
Bohan, A.
Dorshow, W.
Elsaied, M.
Fitzcarrald, A.
Falconer, R.
Kearns, T.
Proctor, A.
Roperez, J.
Ryzhov, I.
Sade, H.
Sattiabaruth, S.
Simpson, B.
Sumiyoshi, M.
Tinmouth, N.
Powiązania:
https://bibliotekanauki.pl/articles/320936.pdf
Data publikacji:
2018
Wydawca:
Polskie Forum Nawigacyjne
Tematy:
ocean mapping
bathymetry
AUV/USV
echosounder
hydrography
Opis:
The paper presents the impact that the XPRIZE Foundation competition, the Shell Ocean Discovery XPRIZE, has had on the development of current ocean mapping possibilities. A race for the prize has accelerated the development of innovative seabed mapping approaches that concentrated on new systems engineering or cutting-edge and innovative methods of existing equipment exploitation. The GEBCO - Nippon Foundation (NF) Alumni Team’s entry is presented in details as a state of the art example of mature and robust ocean-mapping solution utilizing a high degree of autonomy and providing the possibilities of deep-ocean mapping that were unattainable before.
W artykule przedstawiono wpływ konkursu Shell Ocean Discovery XPRIZE na rozwój współczesnych technik mapowania głębokowodnych obszarów oceanicznych. Wyścig po główną nagrodę stał się motywacją do pracy nad innowacyjnymi metodami eksploracji głębin i nowatorskim wykorzystaniem istniejących systemów. Przykładem jest przedstawiony szczegółowo system zaproponowany przez drużynę GEBCO - Nippon Foundation (NF) Alumni. Połączenie sprawdzonego pojazdu podwodnego (Hugin) z nową, zaprojektowaną w ramach udziału w konkursie jednostką nawodną (SEA-KIT) tworzy nieistniejące wcześniej możliwości pozyskiwania danych o ukształtowaniu dna akwenów głębokowodnych.
Źródło:
Annual of Navigation; 2018, 25; 125-136
1640-8632
Pojawia się w:
Annual of Navigation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of a diet containing beta-carotene and omega-3 fatty acids on the biochemical and nonspecific humoral immunity indicators and on the results of experimental calf rearing
Autorzy:
Zwierzchowski, G.
Micinski, J.
Pogorzelska, J.
Siwicki, A.
Wojcik, R.
Kobzhassarov, T.Z.
Bermagambetova, N.
Shaikamal, G.I.
Fijalkowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/1189818.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie / Polskie Towarzystwo Magnezologiczne im. Prof. Juliana Aleksandrowicza
Tematy:
animal feeding
diet
beta-carotene
omega-3 fatty acid
biochemical indicator
humoral immunity indicator
immunoglobulin
calf
rearing
Opis:
The aim of this study has been to determine the effect of a diet containing β-carotene and omega-3 fatty acids on the biochemical and nonspecific humoral immunity indicators and on the results of rearing calves to day 60 of life. The study was conducted in 2011-2012, on a herd of Polish Holstein-Friesian cows. 54 calves from the herd were divided into 3 groups, 18 animals in each: CTR, TRT1 and TRT2. During the colostral period lasting for 5 days after birth, calves were drinking the mother’s colostrum. From 6 to 60 days, calves were watered milk replacer formulation. The control group (CTR) consisted of calves after the colostral period given milk replacer formulation without any supplementation. In the two other groups, calves received milk replacers with the supplementation of b-carotene (TRT1 group) in the amount of 25 mg/calf/day or a suspension of liver omega-3 oil (TRT2 group) in the amount of 5g/calf/day. All calves received solid feed ad libitum. The research showed that the parameters of the metabolic profile of calves (ALT, ASP, CHOL, GLU, UREA, ALP, TG, CRE) were within the normal range, indicating good health of the calves. Moreover, the supplementation had a positive impact on the chosen immunological parameters, including a higher IgG concentration, especially at the end of the milk drinking period. The result of B-carotene in a diet was the highest daily gain in the period from 30 to 60 days of life among the analysed groups of calves. No such effect was achieved in the TRT2 group of calves, as their body weight was the lowest. However, noteworthy is the beneficial impact of beta-carotene and omega-3 oil on the non-specific humoral immunity parameters, which was manifested by fewer cases of clinical diarrhoea and upper respiratory tract diseases.
Źródło:
Journal of Elementology; 2016, 21, 1; 283-302
1644-2296
Pojawia się w:
Journal of Elementology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of a diet containing beta-carotene and omega-3 fatty acids on the biochemical and nonspecific humoral immunity indicators and on the results of experimental calf rearing
Autorzy:
Zwierzchowski, G.
Micinski, J.
Pogorzelska, J.
Siwicki, A.
Wojcik, R.
Kobzhassarov, T.Z.
Bermagambetova, N.
Shaikamal, G.I.
Fijalkowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/14928.pdf
Data publikacji:
2016
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie / Polskie Towarzystwo Magnezologiczne im. Prof. Juliana Aleksandrowicza
Tematy:
animal feeding
diet
beta-carotene
omega-3 fatty acid
biochemical indicator
humoral immunity indicator
immunoglobulin
calf
rearing
Opis:
The aim of this study has been to determine the effect of a diet containing β-carotene and omega-3 fatty acids on the biochemical and nonspecific humoral immunity indicators and on the results of rearing calves to day 60 of life. The study was conducted in 2011-2012, on a herd of Polish Holstein-Friesian cows. 54 calves from the herd were divided into 3 groups, 18 animals in each: CTR, TRT1 and TRT2. During the colostral period lasting for 5 days after birth, calves were drinking the mother’s colostrum. From 6 to 60 days, calves were watered milk replacer formulation. The control group (CTR) consisted of calves after the colostral period given milk replacer formulation without any supplementation. In the two other groups, calves received milk replacers with the supplementation of b-carotene (TRT1 group) in the amount of 25 mg/calf/day or a suspension of liver omega-3 oil (TRT2 group) in the amount of 5g/calf/day. All calves received solid feed ad libitum. The research showed that the parameters of the metabolic profile of calves (ALT, ASP, CHOL, GLU, UREA, ALP, TG, CRE) were within the normal range, indicating good health of the calves. Moreover, the supplementation had a positive impact on the chosen immunological parameters, including a higher IgG concentration, especially at the end of the milk drinking period. The result of B-carotene in a diet was the highest daily gain in the period from 30 to 60 days of life among the analysed groups of calves. No such effect was achieved in the TRT2 group of calves, as their body weight was the lowest. However, noteworthy is the beneficial impact of beta-carotene and omega-3 oil on the non-specific humoral immunity parameters, which was manifested by fewer cases of clinical diarrhoea and upper respiratory tract diseases.
Źródło:
Journal of Elementology; 2016, 21, 1
1644-2296
Pojawia się w:
Journal of Elementology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Novel Correlation for Predicting the Density of Tetrazole–N-oxide Salts as Green Energetic Materials through Their Molecular Structure
Autorzy:
Zohari, N.
Bajestani, I. R.
Powiązania:
https://bibliotekanauki.pl/articles/358082.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
tetrazole-N-oxide energetic compounds
density
correlation
multiple linear regression method
molecular structure
Opis:
In this study, a new and reliable model is derived for predicting the density of tetrazole N-oxide salts using molecular structure descriptors through multiple linear regression methods (MLR). The proposed model is based on the elemental, functional group and type of molecule descriptors. The coefficient of determination (R2) of the model was 0.9321 for 36 energetic tetrazole N-oxides with different molecular structures as an exploratoryset. The predictive ability of this model has been checked using a cross validation method (Q2 LOO = 0.9325 and Q2 LMO = 0.9324). The new correlation had a root mean square deviation (RMSD) of 0.033 g·cm−3 and an average absolute deviation (AAD) of 0.025 g·cm−3. This correlation also gave good predicted results for a further 10 energetic tetrazole N-oxides as a test set. The new reliable model can also be appliedfor designing novel energetic tetrazole N-oxides.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 4; 629-651
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza wybranych czynników molekularnych i klinicznych u pacjentek leczonych z powodu raka jajnika taksanami i cisplatyną
Analysis of selected molecular and clinical factors in patients with ovarian cancer treated with taxanes and cisplatin
Autorzy:
Ziółkowska-Seta, I.
Derlatka, P.
Sobiczewski, P.
Panek, G.
Kraszewska, E.
Kupryjańczyk, J.
Bidziński, M.
Mądry, R.
Markowska, J.
Powiązania:
https://bibliotekanauki.pl/articles/908278.pdf
Data publikacji:
2006
Wydawca:
Medical Communications
Tematy:
BAX
BCL-2
TP53
ovarian cancer
taxanes
Opis:
Introduction: Paclitaxel and platinum analogs are standard drugs implemented as first-line therapy in advanced ovarian cancer, after previous surgery. One of causes of resistance to therapy is, among others, disruption of mechanisms leading to cell apoptosis. Aim of the paper is to determine the significance of expression of TP53, BAX and BCL-2 in response to first-line chemotherapy using paclitaxel in patients with advanced ovarian cancer, as well as to assess the role of TP53 as a prognostic and predictive factor in ovarian cancer. Material and method: The study included 164 patients with advanced ovarian cancer. Immunohistochemical staining was performed on histological specimens obtained from paraffin blocks. Monoclonal antibodies anti-BAX, anti-BCL-2 and anti-p53 were used. Results: Accumulation of TP53 was noticed in 60% of tumors. BCL-2 was absent in half of tumors studied. Significant expression of BCL-2 was noticed in 24% of tumors, while that of BAX was seen in 34% of tumors. There was a correlation of histological grade, volume of residual tumor left after surgery and BAX expression with overall survival. Enhanced expression of BAX correlated directly with increased death risk. Accumulation of none of proteins studied had any influence on disease-free survival. Complete remission was obtained in 106 patients. Size of residual tumor has a significant impact on disease-free survival. Conclusions: 1) In ovarian cancer patients, clinical factors clearly have far greater prognostic value than molecular factors. 2) There was no correlation between TP53 expression and clinical response to first-line chemotherapy using paclitaxel, cisplatin or platinum analogs. 3) TP53 expression is not a prognostic or predictive factor in ovarian cancer.
Wstęp:Paklitaksel i analogi platyny są standardem postępowania w pierwszej linii leczenia w zaawansowanym raku jajnika, po uprzedniej chirurgii. Przyczyną oporności na leczenie jest między innymi uszkodzenie mechanizmów prowadzących do apoptozy. Celem naszej pracy jest określenie znaczenia ekspresji TP53, BAX i BCL-2 w odpowiedzi na chemioterapię pierwszej linii z zastosowaniem paklitakselu u pacjentek z zaawansowanym rakiem jajnika, jak również ocena TP53 jako czynnika prognostycznego i predykcyjnego w raku jajnika. Materiał i metody: Badanie przeprowadzono u 164 chorych z zaawansowanym rakiem jajnika. Barwienia immunohistochemiczne zostały wykonane na materiale z bloczków parafinowych. Stosowano przeciwciała monoklonalne anty-BAX, anty-BCL-2 i anty-p53. Wyniki: Akumulację TP53 stwierdzono w 60% guzów. Obecności BCL-2 nie wykazano w połowie badanych guzów. Silną ekspresję BCL-2 stwierdzono w 24%, zaś silną ekspresję BAX – w 34% guzów. Wykazano wpływ histologicznego stopnia zaawansowania, wielkości pozostawionych resztek oraz ekspresji BAX na całkowite przeżycia. Przy silnej ekspresji BAX ryzyko zgonu było większe. Akumulacja żadnego białka nie miała wpływu na długość czasu wolnego od choroby. Całkowitą remisję uzyskano u 106 pacjentek. Wielkość pozostawionych resztek miała znaczący wpływ na długość czasu wolnego od choroby. Wnioski: 1) Czynniki kliniczne mają zdecydowanie większe znaczenie prognostyczne niż czynniki molekularne w raku jajnika. 2) Nie zaobserwowano związku pomiędzy stanem TP53 a odpowiedzią na leczenie pierwszej linii chemioterapii z zastosowaniem paklitakselu i cisplatyny lub analogów platyny. 3) Nie wykazano znaczenia TP53 jako czynnika prognostycznego i predykcyjnego w raku jajnika.
Źródło:
Ginekologia Onkologiczna; 2006, 4, 4; 220-229
1731-5379
Pojawia się w:
Ginekologia Onkologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie modeli quasi-stacjonarnego do opisu kinetyki suszenia marchwi w złożu fluidalno-fontannowym
Application of a quasi-stationary model to describing the kinetics of carrot drying in fluidized-fountain bed
Autorzy:
Zielińska, M.
Białobrzewski, I.
Markowski, M.
Myhan, R.
Powiązania:
https://bibliotekanauki.pl/articles/238867.pdf
Data publikacji:
2005
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
marchew
suszenie
złoże fluidalno-fontannowe
model quasi-stacjonarny
carrot
drying
drying process
fluidized-fontain bed
quasi-stationary model
Opis:
Przedstawiono weryfikację sformułowanych przez Kudrę i Efremova [2003] quasi- stacjonarnych modeli kinetyki suszenia. Wyniki weryfikacji modeli zilustrowano wykresami modeli i dla porównania wynikami pomiarów kinetyki suszenia kostki marchwi w złożu fluidalno-fontannowym. Niskie wartości bezwzględnego lokalnego błędu aproksymacji quasi - stacjonarnego modelu zmian temperatury materiału w procesie suszenia kostki marchwi w złożu fluidalno-fontannowym, świadcząc zadowalającym dopasowaniu modelu do danych eksperymentalnych.
Paper presented the veryfication of quasi-stationary models of drying kinetics, formulated by Kudra and Efremov. The results of models' veryfication were illustrated by diagrams of the models, as well as - for comparison purposes - by the measurement results dealing with drying of carrot slices in a fluidized - fountain bed. Low values of local absolute error of approximation for quasi-stationary model of the dynamics in material temperature changes during drying of the carrot slices in a fluidized - fountain bed, showed satisfactory fitting of the model to experimental data.
Źródło:
Problemy Inżynierii Rolniczej; 2005, R. 13, nr 1, 1; 65-74
1231-0093
Pojawia się w:
Problemy Inżynierii Rolniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Laboratory and numerical experiments into efficient management of VDR filter plants
Autorzy:
Zielina, M.
Dąbrowski, W.
Mackie, R. I.
Powiązania:
https://bibliotekanauki.pl/articles/206922.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
filters
environmental engineering
waste management
deep bed filtration
efficient management
numerical experiments
phenomenological modeling
mathematical model
theoretical modelling
filtry
inżynieria środowiska
gospodarowanie odpadami
filtracja wgłębna
sterowanie efektywne
eksperymenty numeryczne
modelowanie fenomenologiczne
model matematyczny
modelowanie teoretyczne
Opis:
runs are achieved when the highest flow through the most recently backwashed filter and the highest available head loss coincide. This rule has previously been published by Dąbrowski, who used a simplified mathematical model of VDR filters developed by Di Bernardo. However, until now no experimental verification of this optimisation approach has been presented. A series of tests were carried out on a laboratory VDR filter plant, using a suspension collected from an industrial sedimentation tank and using alum as a coagulant. The results of the experiments were compared with computations carried out according to a combined unit bed element (UBE)-phenomenological model of deep bed filtration adapted to VDR operation by Mackie and Zhao. It was confirmed that the longest filtration runs did indeed correspond to the pairs of the highest H and q1/qavr. The UBE-phenomenological model of deep bed filtration gave results of computations quite close to experimental results and improved the accuracy of calculations based on the theoretical model by Di Bernardo.
Źródło:
Environment Protection Engineering; 2015, 41, 3; 101-120
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Теоретические исследования сопротивления движению ходовыхсистем
Theoretical research of resistance motion of running systems
Badania teoretyczne oporów przetaczania układów jezdnych
Autorzy:
Zhdanovich, C. I.
Orda, A. N.
Kamiński, J. R.
Kuboń, M.
Powiązania:
https://bibliotekanauki.pl/articles/337609.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
resistance
boring
tractor
load
opór
przetaczanie
ciągnik
obciążenie
Opis:
The paper presents the analysis of means of transportation used in the theoryand relations of resistance motion of wheel and full-track propellers. It is shown that the available scientific studies leave out singularities of deformation of soil at cyclical loadings by ground wheels. Presented relations of resistance motion of sprockets and reference ground wheels of a full-track propeller take into account a nature of soil deformation at repeated loadings. The decrease in contact stress is also taken in consideration at each subsequent loading. Rolling resistance of a reference ground wheel and overall resistance force of a rolling of a full-track propeller at different conditions of loading are defined.
W artykule przytoczono analizę stosowanych w teorii środków transportowych zależności opisujących opory przetaczania podwozi kołowych i gąsienicowych. Wykazano, że dotychczasowe badania naukowe nie uwzględniają osobliwości odkształcanej gleby przy cyklicznych obciążeniach układami jezdnymi podwozi. Określono zależności oporów przetaczania układów jezdnych od parametrów eksploatacyjnych. Przedstawione zależności oporów przetaczania podwozi kołowych i kół podporowych gąsienicy uwzględniają charakter deformacji gleby przy kolejnych obciążeniach. Uwzględniają także spadek naprężeń kontaktowych przy każdym następnym obciążeniu. Określono opory przetaczania i-tego koła podporowego i sumaryczne opory przetaczania układu gąsienicowego przy różnych obciążeniach.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2017, 62, 1; 182-186
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efektywność wytłaczania oleju z nasion rzepaku
Efficiency of pressing oil from rape seeds
Autorzy:
Zdanowska, P.
Florczak, I.
Wojdalski, J.
Klimkiewicz, M.
Dróżdż, B.
Mruk, R.
Powiązania:
https://bibliotekanauki.pl/articles/289844.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
olej rzepakowy
wytłaczanie
obróbka wstępna
rozpuszczalnik
metanol
rape oil
pressing
initial processing
solvent
methanol
Opis:
Przeprowadzone w pracy badania miały na celu określenie efektywności wytłaczania oleju z nasion rzepaku z zastosowaniem nasączania rozpuszczalnikiem organicznym. Zakres pracy obejmował obróbkę wstępną materiału oraz proces wytłaczania przy użyciu prasy jednoślimakowej wraz z badaniem ilości powstałego oleju w jednostce czasu oraz energii elektrycznej potrzebnej do jego wytłoczenia. Zastosowano cztery prędkości obrotowe ślimaka prasy: 20, 30, 40, 50 obr.·min-1 oraz trzy średnice dyszy wylotowej: 6, 8, 10 mm. Nasiona rzepaku nasączano rozpuszczalnikiem (24 godziny przed wytłaczaniem) - alkoholem metylowym (metanolem) w proporcji masowej 1:40 oraz 1:20. Największa wydajność wytłaczania wyniosła 6,3 kg oleju na godzinę, przy 6 mm średnicy dyszy i 50 obr.·min-1 dla rzepaku nasączonego metanolem w proporcji 1:20. Największy stosunek masy oleju do masy wytłoków - 0,624 i 0,610 kg oleju na kg wytłoków, przy 6 mm średnicy, 20 i 30 obr.·min-1 dla rzepaku z metanolem 1:20. Najmniejsza energochłonność procesu - 0,1051 i 0,1054 kWh na kg oleju, przy 10 mm średnicy i 50 obr.·min-1, co odpowiada najwyższej efektywności energetycznej - 9,515 i 9,487 kg oleju na kWh.
The objective of the research carried out within the paper was to determine efficiency of pressing oil from rape seeds with the use of saturation with organic solvent. The scope of the paper covered an initial processing of the material and the pressing process with the use of a one - screw press along with testing the amount of oil which was formed in the time and electric energy units necessary for pressing it. Four rotational speeds of the press screw were applied: 20, 30, 40, 50 rotations·min-1 and three diameters of the outlet nozzle: 6, 8, 10 mm. Rape seeds were saturated with solvent (24 hours before pressing) - methyl alcohol (methanol) in the mass proportion 1:40 and 1:20. The highest efficiency of pressing was 6.3 (kg of oil)·h-1 at 6 mm diameter of the nozzle and 50 rotations·min-1 for rape saturated with methanol in the 1:20 proportion. The biggest oil mass to pomace mass ratio - 0.624 and 0.610 (kg of oil)·kg of pomace-1 at 6 mm diameter, 20 and 30 rotations·min-1 for rape with methanol 1:20. The lowest energy consumption of the process - 0.1051 and 0.1054 kWh·(kg of oil-1) at 10 mm diameter and 50 rotations·min-1 which corresponds to the highest energy efficiency - 9.515 and 9.487 (kg of oil)·kWh-1.
Źródło:
Inżynieria Rolnicza; 2013, R. 17, nr 1, t. 1, 1, t. 1; 287-293
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New Capabilities of the NTPRO 4000 Full Mission Ship Handling Simulator in the Assessment and Evaluation Processes at Lithuanian Maritime Academy
Autorzy:
Zazeckis, R.
Bartuseviciene, I.
Maksimavicius, R.
Powiązania:
https://bibliotekanauki.pl/articles/116072.pdf
Data publikacji:
2009
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Manoeuvring
ship handling simulator
Full Mission Bridge Simulator (FMBS)
MET System in Lithuania
Assessment Process
Evaluation Process
NTPRO 4000
STCW Implementation
Opis:
Nowadays the equipment used on ships is becoming more and more sophisticated, safety of shipping depends heavily not only on trustworthiness of high-tech products, but also on mariners’ competence. It is necessary to find methods to enable seafarers to keep track with technical developments. Simulators as a tool combined with a properly developed course curriculum and qualified instructors provide an appropriate method not only for training, but also for measuring, assessing and evaluating individual mariner performance in order to test levels of competency and proficiency. According to Nieri (1995, p. 1/6), “The development of performance-based assessment tools would utilize the widely-recognized advantages of simulators and part-task trainers to generate a scenario in which the license candidate must demonstrate his knowledge of system relationships, knowledge of operational procedures, monitor systems and situations, respond to unexpected occurrences, identify and diagnose problems, and manage personnel, in a dynamic world“. This paper discusses the usage of new capabilities of the NTPRO 4000 full mission ship handling simulator in the assessment and evaluation processes at Lithuanian Maritime Academy.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2009, 3, 3; 269-274
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies