Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Pereira, T." wg kryterium: Autor


Tytuł:
Calculation of edge ion temperature and poloidal rotation velocity from carbon III triplet measurements on the COMPASS tokamak
Autorzy:
Tomeš, M.
Weinzettl, V.
Pereira, T.
Imríšek, M.
Seidl, J.
Powiązania:
https://bibliotekanauki.pl/articles/148182.pdf
Data publikacji:
2016
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
high-resolution spectroscopy
spectra processing
peak detection
line detection
line fitting
poloidal plasma rotation
ion temperature
Opis:
A high-resolution spectroscopic system for the measurements of the CIII triplet at 465 nm was installed at the COMPASS tokamak. The Doppler broadening and shift of the measured spectral lines are used to calculate the edge ion temperature and poloidal plasma rotation. At first, the spectroscopic system based on two-grating spectrometer and the calibration procedure is described. The signal processing including detection and removal of spiky features in the signal caused by hard X-rays based on the difference in the behaviour of Savitzky-Golay and median filters is explained. The detection and position estimation of individual spectral lines based on the continuous wavelet transform is shown. The method of fitting of Gaussians using the orthogonal distance regression and estimation of the error of estimation of the rotation velocity and ion temperature is described. At the end, conclusions about the performance of the spectroscopic system and its shortcomings based on summary of results calculated from 2033 processed spectral lines measured in 61 shots are drawn and the possible enhancements are suggested.
Źródło:
Nukleonika; 2016, 61, 4; 443-451
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis and monitoring of electrical grounding grid encapsulated with concrete: case study using simulation in finite element method
Autorzy:
Pereira, T. M.
Lima, R.
Gomes, V. M.
Calixto, W. P.
Alves, A. J.
Powiązania:
https://bibliotekanauki.pl/articles/136184.pdf
Data publikacji:
2017
Wydawca:
EEEIC International Barbara Leonowicz Szabłowska
Tematy:
grounding systems
finite elements method
Opis:
This work study the influence of concrete, plaster, clay and others buried structures in grounding systems. Comparison of soil characteristics between dry and rainy seasons on different grounding systems. The study includes comparison of six different grounding system on dry season and wet season. Simulations in finite element method was performed for tree layer stratified soil and the electrostatic equipotential surfaces were mapped into the region of interest.
Źródło:
Transactions on Environment and Electrical Engineering; 2017, 2, 2; 31-36
2450-5730
Pojawia się w:
Transactions on Environment and Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Calculation of the influence of slot geometry on the magnetic flux density of the air gap
Autorzy:
Lima, R. A. de
Coimbra, A. C. P.
Almeida, T.
Gomes, V. M.
Pereira, T. M.
Alves, A. J.
Calixto, W. P.
Powiązania:
https://bibliotekanauki.pl/articles/136264.pdf
Data publikacji:
2017
Wydawca:
EEEIC International Barbara Leonowicz Szabłowska
Tematy:
Carter's factor
finite element method
rotating machines
Opis:
The objective of this work is to investigate the influence of slotted air gap constructive parameters on magnetic flux density of rotating machines. For this purpose, different approaches were used to solve the air gap field diagram using finite element method and the magnetic field distribution uniformity was evaluated by Carter's factor calculation on two-dimensional and three-dimensional models. Sensitivity analysis of slot constructive parameters was performed and results show that slot geometry modifies the magnetic flux on air gap and shifts the air gap magnetic equipotential midline of double slotted machines. Finally, minimization of Carter’s factor on two-dimensional model presents an optimized slot geometry with a near uniform magnetic flux density distribution.
Źródło:
Transactions on Environment and Electrical Engineering; 2017, 2, 1; 81-89
2450-5730
Pojawia się w:
Transactions on Environment and Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Property identification of viscoelastic solid materials in nomograms using optimization techniques
Autorzy:
de Sousa, T. L.
Kanke, F.
Pereira, J. T.
Bavastri, C. A.
Powiązania:
https://bibliotekanauki.pl/articles/280283.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
identification
optimization
viscoelastic materials
Zener fractional model
Wiechert model
Opis:
Viscoelastic materials have been widely used as devices for vibration control in general. Frequently, dynamic properties of those materials are provided by manufacturers only in a graph form in the frequency domain. This is a recurring problem in industry and academia. Thereby, the goal of this work is to contribute to this important issue which is to obtain the properties of viscoelastic materials from nomograms supplied by the manufacturer. The methodology is based on the digitalization of the nomogram of the material and on the subsequent reading of a set of points from two curves in different temperatures. An optimization problem with simple restrictions is built having characteristic constants of the constitutive models as design variables. The problem is solved by applying a hybrid optimization technique. The results obtained are presented, and prove to be very promising.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 4; 1285-1297
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Inclusion and adaptation beyond disability: Using virtual reality to foster empathy
Autorzy:
Pinto-Coelho, Luis
Laska-Leśniewicz, Anna
Pereira, Elizabeth T.
Sztobryn-Giercuszkiewicz, Joanna
Powiązania:
https://bibliotekanauki.pl/articles/22373777.pdf
Data publikacji:
2023-09-08
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
pregnancy
autism
empathy
disabilities
virtual reality
society
Opis:
Background Virtual reality (VR) has the potential to be a powerful tool in promoting empathy towards inclusion, particularly for individuals with impairments such as mobility difficulties, vision deficits, or autism but also about pregnancy, which can create temporary difficulties. By immersing users in simulated environments that replicate the experiences of those with different abilities, VR can create a sense of understanding and empathy for those who face challenges in their daily lives. For example, VR experiences can simulate the experience of navigating space as someone with a mobility impairment, providing a new perspective and appreciation for the difficulties that others face. Similarly, VR experiences can simulate the experience of vision impairment, pregnancy, or autism, providing a window into the challenges faced by those with these conditions and fostering empathy and understanding. Material and Methods During the development of this study, field experts were consulted to ensure the robustness of the methods employed. Then, questionnaires were specifically developed to explore disabilities and challenges related to inclusion and were administered to a large population. Additionally, guided interviews were conducted with individuals who possess specific impairments to gather first-hand insights. Results The results obtained from the questionnaires and interviews provide a comprehensive overview of the inclusion challenges that necessitate attention and resolution. By drawing on the expertise of both experts and individuals with lived experiences, a holistic landscape of inclusion challenges has been established. Conclusions The VR emerges as a powerful tool for promoting inclusion and fostering understanding among individuals. Its capacity to create immersive experiences that facilitate empathy has the potential to reshape society into a more compassionate and empathetic one. By leveraging the unique capabilities of VR, we can bridge the gap between different perspectives, fostering greater understanding, acceptance, and inclusivity.
Źródło:
Medycyna Pracy. Workers’ Health and Safety; 2023, 74, 3; 171-185
0465-5893
2353-1339
Pojawia się w:
Medycyna Pracy. Workers’ Health and Safety
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fractal dimension and anisotropy of soil CO2 emission in an agricultural field during fallow
Autorzy:
La Scala, N.,Jr.
Panosso, A.R.
Pereira, G.T.
Gonzalez, A.P.
Miranda, J.G.V.
Powiązania:
https://bibliotekanauki.pl/articles/24282.pdf
Data publikacji:
2009
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Źródło:
International Agrophysics; 2009, 23, 4; 353-358
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A concept of in-process measurement system for spline forming
Autorzy:
Wieczorowski, M.
Eichner, T.
Lindner, I.
Pereira, A.
Powiązania:
https://bibliotekanauki.pl/articles/407260.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gear
spline
forming
coordinate metrology
in-process inspection
Opis:
In the paper a possibility of in-process inspection of gear and spline shafts during forming was discussed. Different methods of forming toothed elements were discussed as well as the other technologies were mentioned. Coordinate measurement technique as a way of post process inspection was presented. However, it is not possible to use it for checking features during forming process. To do it different sensors were used and their combinations were described.
Źródło:
Management and Production Engineering Review; 2015, 6, 2; 73-81
2080-8208
2082-1344
Pojawia się w:
Management and Production Engineering Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of machining of EN-GJL-250 and EN-GJS-400 cast irons on tribological behavior
Autorzy:
Martinez, J.
Pereira, A.
Perez, J. A.
Mathia, T.
Powiązania:
https://bibliotekanauki.pl/articles/94140.pdf
Data publikacji:
2015
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
tribological behavior
grey cast iron
spheroidal graphite cast iron
friction
surface wear
Opis:
In transport and, particularly in the case of the present study, naval industries, one of the major objectives of research on wear and friction is focused principally on solid lubrication. In the following paper, the tribological behaviors of two well-known, different cast irons, lamellar grey iron (EN-GJL-250) and spheroidal graphite ductile iron (EN-GJS-400), are compared and the results are analyzed. For each material's family, the surfaces’ properties are characterized at different stages of the machining process. The particular influence of diverse feed rates in a turning facing is evaluated. Moreover, some tests of the laser cladding process, which contribute to the improvement of superficial properties, are carried out; therefore, the initial morphology before surface treatment is carefully characterized and evaluated in the context of subsequent adhesion qualification. The final goal of the study is to deliver feasible initial information concerning two similar cast irons that are traditionally used in the naval industry, which would be manufactured and employed in the future as dry lubricated bearings
Źródło:
Archives of Mechanical Technology and Materials; 2015, 35; 12-22
2450-9469
Pojawia się w:
Archives of Mechanical Technology and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of crystals based on cesium iodide for measurements of gamma radiation and alpha particles
Autorzy:
Pereira, M. C. C.
Filho, T. M.
Hamada, M. M.
Powiązania:
https://bibliotekanauki.pl/articles/148098.pdf
Data publikacji:
2009
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
scintillator
crystals
gamma radiation
alpha particles
luminescence
Opis:
During the past 50 years, scintillators have been among the most important nuclear radiation detectors. Inorganic scintillators are widely used in experimental nuclear physics, high energy physics, nuclear medicine, nuclear tomography, environmental studies and many other fields of use. Scintillation crystals based on cesium iodide (CsI) are matters of relatively low hygroscopy, high atomic number, easy handling and low cost, characteristics that favor their use as radiation detectors. In this work, the growth of pure CsI crystals, CsI:Br and CsI:Pb, using the Bridgman technique, is described. Ions of divalent lead (Pb2+) doped in the crystal structures are efficient emission centers and their application as scintillators is still the reason for intensive studies. Recently, promising results have been found for crystals of CsI doped by bromine (Br) for their use as radiation detectors. The concentration of the bromine doping element (Br) was studied in the range from 1.5 × 10–1 M to 10–2 M and the lead (Pb) in the range from 10–2 M to 5 × 10–4 M. To evaluate the scintillators developed, systematic measurements were carried out for luminescence emission and luminescence decay time for gamma radiation, Vickers microhardness assays, and analysis of crystals response to the gamma radiation, in the energy range from 350 keV to 1330 keV, and alpha particles from a 241Am source, with energy of 5.54 MeV. The obtained values for luminescence decay time for CsI:Br and CsI:Pb crystals, were from 13 to 19 ns.
Źródło:
Nukleonika; 2009, 54, 3; 151-155
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wspomaganie wzrostu komórek kostnych na hydrożelach z gumy gellan za pomocą mineralizacji enzymatycznej
Promotion of bone cells growth on gellan gum hydrogels by enzymatic mineralization
Autorzy:
Pietryga, K.
Costa, J
Pereira, P.
Douglas, T. E. L.
Pamuła, E.
Powiązania:
https://bibliotekanauki.pl/articles/285546.pdf
Data publikacji:
2014
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
hydrożel
kompozyt
mineralizacja
fosfataza alkaliczna
hydrogel
composite
mineralization
alkaline phosphatise
Opis:
Enzymatyczna mineralizacja hydrożeli jest obiecującym sposobem uzyskiwania materiałów do leczenia ubytków tkanki kostnej. Dzięki wytworzeniu wewnątrz materiału fosforanów wapnia (CaP), hydrożele stają się sztywniejsze, przez co bardziej odpowiednie do regeneracji tkanki kostnej. W przedstawionych badanych hydrożele z gumy gellan (GG) zawierające enzym – fosfatazę alkaliczną (ALP, 0,5 mg/ml) były mineralizowane poprzez inkubację w roztworze glicerofosforanu wapnia (CaGP). Porównano trzy różne stężenia GG: 0,7; 1,2 i 1,6%. W celu oceny zawartości CaP oznaczono suchą masę mineralizowanych próbek. Rozmieszczenie fazy mineralnej obserwowano w mikroskopie świetlnym na przekrojach. Przeprowadzono również testy mechaniczne w próbie ściskania. W badaniach komórkowych komórki osteoblastopodobne MG-63 hodowano na powierzchni materiałów jak i na przekrojach w okresie 1 oraz 7 dni. Żywotność komórek oznaczono przy pomocy barwienia live/dead. Badania mechaniczne wykazały znacznie wyższy moduł Younga w przypadku materiałów zmineralizowanych w porównaniu z czystymi hydrożelami jednak wzrost ten nie był tak wyraźny dla hydrożeli o wyższym stężeniu GG. Z powodu wypłukiwania ALP, rozmieszczenie fazy mineralnej w obrębie próbek nie było jednorodne: większość CaP tworzyła się wewnątrz materiału. Obecność fazy mineralnej sprzyjała adhezji komórek MG-63 do materiału, ich rozpłaszczeniu jak również przeżywalności.
Enzymatic mineralization of hydrogels is a promising approach to obtain new materials for the treatment of bone tissue defects. Thanks to creation of calcium phosphates (CaP) inside the material, the hydrogel becomes more rigid and therefore more suitable for bone tissue replacement. In this study, gellan gum (GG) hydrogels containing the enzyme alkaline phosphatase (ALP, 0.5 mg/ml) were mineralized by incubation in mineralization solutions of calcium glycerophosphate (CaGP). Three different concentrations of GG were compared: 0.7, 1.2 and 1.6% (w/v). In order to assess amount of CaP formed, dry mass percentage was calculated while distribution of mineral phase was observed by light microscopy. Mechanical tests in compression mode were also carried out. Osteoblast-like MG-63 cells were cultured for 1 and 7 days on the surface and cross-sections of mineralized and non-mineralized samples. Viability of cells was measured by live/dead staining. Mechanical testing revealed that Young’s modulus of mineralized hydrogels was much higher than unmineralized hydrogels. However, this increase was not particularly pronounced for samples of higher GG content. Due to ALP leaching, the distribution of minerals was inhomogeneous: most of the mineral phase was formed inside the material. The presence of CaP in mineralized samples promoted attachment, spreading and viability of MG-63 cells.
Źródło:
Engineering of Biomaterials; 2014, 17, 125; 6-12
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stem quality of Quercus cerris trees from Kosovo for the sawmilling industry
Autorzy:
Bajrakatri, A.
Pimenta, R.
Pinto, T.
Miranda, I.
Knapic, S.
Nunes, L.
Pereira, H.
Powiązania:
https://bibliotekanauki.pl/articles/52852.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Drewna
Źródło:
Drewno. Prace Naukowe. Doniesienia. Komunikaty; 2018, 61, 201
1644-3985
Pojawia się w:
Drewno. Prace Naukowe. Doniesienia. Komunikaty
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effectiveness of nanoatrazine in post-emergent control of the tolerant weed Digitaria insularis
Autorzy:
Sousa, B.T.
Pereira, A.E.S.
Fraceto, L.F.
De Oliveira, H.C.
Dalazen, G.
Powiązania:
https://bibliotekanauki.pl/articles/2082785.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
atrazine
chemical control
nanoherbicide
nanotechnology
sourgrass
tolerant
weed control
Opis:
Digitaria insularis (sourgrass) is a monocotyledon weed of difficult control and high in- vasive behavior. Atrazine is widely applied in the Americas to control weeds in maize cul- ture, but its efficiency against D. insularis is limited. The incorporation of atrazine into poly(epsilon-caprolactone) nanocapsules increased the herbicidal activity against suscep- tible weeds; however, the potential of this nanoformulation to control atrazine-tolerant weeds including D. insularis has not yet been tested. Here, we evaluated the post-emergent herbicidal activity of nanoatrazine against D. insularis plants during initial developmental stages. The study was carried out in a greenhouse, using pots filled with clay soil. Plants with two or four expanded leaves were treated with conventional or nanoencapsulated at- razine at 50 or 100% of the recommended dosage (1,000 or 2,000 g ∙ ha −1 ), followed by the evaluation of physiological, growth, and control parameters of the plants. Compared with conventional herbicide, both dosages of nanoatrazine induced greater and faster inhibition of D. insularis photosystem II activity at both developmental stages. Atrazine nanoencap- sulation also improved the control of D. insularis plants, especially in the stage with two expanded leaves. In addition, nanoatrazine led to higher decreases of dry weight of four- leaved plants than atrazine. The use of the half-dosage of nanoatrazine was equally or more efficient in affecting most of the evaluated parameters than the conventional formulation at full dosage. Overall, these results suggest that the nanoencapsulation of atrazine potenti- ated its post-emergent herbicidal activity against D. insularis plants at initial developmental stages, favoring the control of this atrazine-tolerant weed.
Źródło:
Journal of Plant Protection Research; 2020, 60, 2; 185-192
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Relationship between performance, dry-land power and kinematics in master swimmers
Autorzy:
Espada, M. C.
Costa, M. J.
Costa, A. M.
Silva, A. J.
Barbosa, T. M.
Pereira, A. F.
Powiązania:
https://bibliotekanauki.pl/articles/307228.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
pływanie
kinematyka
energia
master swimmers
kinematic
dry-land power
performance
Opis:
The purpose of the study was to analyze the relationships between sprint swimming performance, dry-land power, and kinematics in master swimmers. Twenty-two male master swimmers were separated in two groups based on their chronological age: (i) 30–39 years and; (ii) 40–49 years. Maximum dry-land power was determined through counter movement jump and 3 kg medicine ball throwing (Hmax and Tmax, respectively). Kinematic determinants of performance were measured during a maximal bout of 15, 25 and 50 m front crawl (T15, T25, T50). Stroke frequency (SF), stroke length (SL) and stroke index (SI) were calculated as kinematical aspects of the stroke. In the 30-39 group, SI25 was correlated to T25 (r = –0.76, p < 0.01, η2 = 0.96), the same was observed between SI50 and T50 (r = –0.83, p < 0.01, η2 = 0.96). Only SI50 was significantly correlated to T50 (r = –0.86, p < 0.01, η2 = 0.97) in the 40–49 years age cohort. In dryland power variables, Hmax and Tmax were only correlated in the younger master swimmers group (r = –0.87, p < 0.01, η2 = 0.97). There were no significant differences (p < 0.05) between younger (30–39 years) and older (40–49 years) swimmers groups in dry-land tests (Hmax 28.5 ± 5.9 vs. 26.5 ± 3.9 cm and Tmax 4.2 ± 1.0 vs. 4.2 ± 1.1 m). Our results suggest that swimming performance in younger master swimmers (30–39 years) seem more dependent on kinematic swimming variables than on strength parameters, which were most related to swimming performance in the older master swimmers (40–49 years).
Źródło:
Acta of Bioengineering and Biomechanics; 2016, 18, 2; 145-151
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Expression on hypoxia-inducible factor-1α in human tegumentary leishmaniosis caused by Leishmania braziliensis
Autorzy:
Rocha, F.J.S.
Pereira, C.L.D.
de Melo, F.L.
Soares, C.R.P.
Paz, S.T.
Giorgio, S.
Powiązania:
https://bibliotekanauki.pl/articles/6320.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Parazytologiczne
Źródło:
Annals of Parasitology; 2018, 64, 1
0043-5163
Pojawia się w:
Annals of Parasitology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stratigraphy, palynology and organic geochemistry of the Devonian-Mississippian metasedimentary Albergaria-a-Velha Unit (Porto-Tomar shear zone, W Portugal)
Autorzy:
Machado, G.
Francu, E.
Vavrdová, M.
Flores, D.
Fonseca, P. E.
Rocha, F. T.
Pereira, L. C. G.
Gomes, A.
Fonseca, M.
Chaminé, H.
Powiązania:
https://bibliotekanauki.pl/articles/2059150.pdf
Data publikacji:
2011
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
Mississippian
Late Devonian
Ossa-Morena Zone
Porto-Tomar shear zone
palynology
organic geochemistry
Opis:
The Albergaria-a-Velha Unit is one of several tectonostratigraphic out-of-sequence units of the metamorphic belt associated with the Porto-Tomar shear zone (Ossa-Morena Zone, W Portugal). It is composed of considerably deformed - very low grade - metasediments, namely shales, siltstones and rare fine sandstones. In this work we present new sedimentological and biostratigraphical data that suggest the Albergaria-a-Velha Unit was deposited from the (?)early Frasnian to the Serpukhovian in a distal marine environment, where turbiditic and basinal sedimentation prevailed. Palynofacies analysis and lithological data point to a gradual increase of terrestrial input, suggesting a prograding system. Detrital framework data is indicative of a stable cratonic sediment source area composed of low grade metamorphic rocks. The timing of the onset of the Porto-Tomar shear zone activity and consequently its influence on the sedimentation of this unit is discussed. Organic petrology and geochemistry data indicate that the Albergaria-a-Velha Unit is within the dry gas window in terms of hydrocarbon generation ranges.
Źródło:
Geological Quarterly; 2011, 55, 2; 139-164
1641-7291
Pojawia się w:
Geological Quarterly
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies