Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

English (EN)·Polski (PL)·Yкраїнський (UK)
Przejdź do strony domowej biblioteki Centralna Biblioteka Wojskowa Link otwiera się w nowym oknie Logo biblioteki Prolib Integro - strona głównaCentralna Biblioteka Wojskowa

Wyszukujesz frazę "Park, S.-J." wg kryterium: Autor

  Lista filtrów
Wyrównaj
Wyświetlanie 1-25 z 39
Tytuł:
An Experimental Study on the Determination of Optimal Lubrication Conditions in a High-Speed Spindle
Autorzy:
Park, S.-J.
Hwang, Y.-K
Lee, C.-M
Powiązania:
https://bibliotekanauki.pl/articles/971161.pdf
Data publikacji:
2009
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
optimal lubrication condition
oil-air lubrication
high speed spindle
Opis:
The heat generation inside spindles becomes a major factor that limits the allowable maximum rotational speed in machine tools and decreases the cutting quality. It is necessary to accurately estimate the temperature distribution in spindles caused by the heat generation in bearings and its heat transfer characteristics in order to perform the high-speed and high-precision in high-speed spindles. In addition, an accurate correction process is required according to the results of the estimation through investigating the thermal deformation error. A commercial program, MINITAB, was used to establish an experiment plan that analyzes the heat generation characteristics of the spindle system according to the operation and lubrication conditions of the spindle. Also, the change in the outer ring temperature of bearings was measured according to the experimental plan. After establishing a response surface model using the results of the experiment, the estimation equation of the quadratic polynomial model was proposed for determining the optimal lubrication condition. A verification experiment was applied to verify the accuracy of the experimental equation determined by the estimated regression model and the experimental value used in the estimation of the regression model.
Źródło:
Journal of Machine Engineering; 2009, 9, 2; 106-113
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Treatment And Modification Of Graphene Using Organosilane And Its Thermal Stability
Obróbka powierzchniowa i modyfikacja grafenu przy użyciu organosilanu i jego stabilność termiczna
Autorzy:
Kim, D.-S.
Dhand, V.
Rhee, K.-Y.
Park, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/354056.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
graphite
thermal properties
Raman spectroscopy
surface treatment
3-APTES
grafit
właściwości termiczne
spektroskopia Ramana
obróbka powierzchniowa
Opis:
In this study, graphene was functionalized via acid oxidation in the presence of a mixture of concentrated sulfuric acid and nitric acid. The oxidized graphene was silanized using the coupling agent, 3-aminopropyltriethoxsilane, resulting in functionalized graphene. The oxidized graphene and functionalized graphene were characterized by X-Ray diffraction, Fourier transform infrared spectroscopy, High-resolution micro Raman spectroscopy, thermogravimetric analysis, and atomic force microscopy to confirm the presence of functional moieties on the graphene surface. Thermal studies also demonstrate that the functionalized material is thermally stable up to higher temperatures.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1387-1391
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of Hydrophobic Surgical Forceps using Powder Injection Molding and Surface Treatment
Autorzy:
Park, D. Y.
Park, B. R.
Gal, C. W.
Lin, D.
Han, J. S.
Jeong, M.-S.
Bollina, R.
Hwang, W.
Park, S. J.
Powiązania:
https://bibliotekanauki.pl/articles/352093.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
powder injection molding
hydrophobic
debinding
sintering
surface treatment
Opis:
Hydrophobic surgical forceps of end-effectors for laparoscopic operations or minimally invasive surgery were developed through powder injection molding (PIM) and surface treatment. Processing conditions for mixing, debinding, and sintering were investigated to produce defect-free components. An optimum solid loading was determined by torque rheometry experiments. The optimized processing conditions for debinding and sintering were designed through the measurement of weight loss and shrinkage behavior by thermogravimetric analysis and dilatometry experiments. After producing the surgical forceps based on the optimized processing conditions via PIM, surface treatment was carried out to generate the hydrophobic structure on the surface.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 473-480
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Functional Requirements to Support Traffic Organization Service
Autorzy:
Jeong, J.S.
Park, G.K.
Powiązania:
https://bibliotekanauki.pl/articles/117325.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
marine traffic
e-navigation
Traffic Organization Service (TOS)
IALA
Opis:
In the era of e‐Navigation, the future VTS is anticipated to play an important role on the enhancement of maritime safety and the efficiency of maritime transport as a key stakeholder of e‐Navigation. The VTS services need the advanced Traffic Organization Service(TOS). In this paper, the VTS functions for TOS is revisited from the reports of IMO e‐Navigation Correspondence Group and IALA VTS Committee. In Korea, the research activities to enhance the existing VTS functions have been conducted. In terms of TOS, some VTS functions have been developed. In conclusion, all the past traffic data and real‐time ship data are required to provide the advanced TOS. For this, the advanced functions to support TOS should be implemented on VTS console.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2013, 7, 1; 115-118
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analyzing the factors affecting the safe maritime navigation for training apprentice officers
Autorzy:
Lee, M. K.
Park, S. W.
Park, Y. S.
Park, M. J.
Lee, E. K.
Powiązania:
https://bibliotekanauki.pl/articles/116471.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
maritime education and training (MET)
safe maritime navigation
training apprentice officers
simulation based training
ship maneuver simulation
navigational safety
safety at sea
apprentice officer
Opis:
One of the primary factors that affect the safe maritime navigation is the insufficient experience and skill of an apprentice officer, which may be improved using simulation-based training by ensuring operational efficiency. This study aims to determine appropriate factors for achieving effective and intensive simulation-based training of apprentice officers and present the guidelines for such a training scheme. Initially, a marine traffic risk model, which interprets and accurately measures the risk of collision with other vessels, is analyzed to derive the most influential factors in safe navigation. Subsequently, simulation experiments are conducted by applying machine learning to verify the required safe navigation factors for effectively training the apprentice officers. As a result of the above analysis, it was confirmed that the factor affecting safe maritime navigation was the distance from other vessels. Finally, the differences between these distances in the simulations are analyzed for both the apprentice officers and the experienced officers, and the guidelines corresponding to both these cases are presented. This study has the limitation because of the difference between the ship maneuver simulation and the actual ship navigation. This can be resolved based on the results of this study, in combination with the actual navigation data.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2019, 13, 2; 393-399
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Ni Content on the Austenite Stability and Mechanical Properties of Nanocrystalline Fe-Ni Alloy Fabricated by Spark Plasma Sintering
Autorzy:
Park, D.
Oh, S.-J.
Shon, I.-J.
Lee, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/352972.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Fe-Ni alloy
austenite stability
mechanical properties
spark plasma sintering
Opis:
The mechanical behavior and the change of retained austenite of nanocrystalline Fe-Ni alloy have been investigated by considering the effect of various Ni addition amount. The nanocrystalline Fe-Ni alloy samples were rapidly fabricated by spark plasma sintering (SPS). The SPS is a well-known effective sintering process with an extremely short densification time not only to reach a theoretical density value but also to prevent a grain growth, which could result in a nanocrystalline structures. The effect of Ni addition on the compressive stress-strain behavior was analyzed. The variation of the volume fraction of retained austenite due to deformation was quantitatively measured by means of x-ray diffraction and microscope analyses. The strain-induced martensite transformation was observed in Fe-Ni alloy. The different amount of Ni influenced the rate of the strain-induced martensite transformation kinetics and resulted in the change of the work hardening during the compressive deformation.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1477-1480
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study on the Electrical Characteristics and Oxidation Resistance of the STS434L-High Chrome Powder Green Compact at the High-Temperature
Autorzy:
Park, J. W.
Jung, W. Y.
Park, D. K.
Ahn, I. S.
Powiązania:
https://bibliotekanauki.pl/articles/354543.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
stainless steel
fecraloy
oxidation resistance
metallic oxide
Opis:
Metallic oxide layer of heat resistant element contributes to the high-temperature oxidation resistance by delaying the oxidation, and also has positive effect on the electrical resistivity increase. In this study, the green compacts of Fe-Cr-Al powder mixed with STS434L were oxidized at 950°C up to 210 hrs in order to consider the effect of metal oxide on the oxidation and electrical resistance. It exhibited the low oxidation resistance in case of 434L only, however it increased as the amount of Fe-Cr-Al powder in the 434L compact. The higher electrical resistivity was observed at the Fe-Cr-Al compact with and 434L powder. The metal oxides of (Fe0.6C0.4)2O3, Cr2O3, and Fe2O3 contributed to the electrical resistivity, whereas Al2O2 took a role of oxidation resistance.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 431-435
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and Characterization of a Water-Soluble Ionic Polyacetylene Derivative
Autorzy:
Gal, Y.
Jin, S.
Park, J.
Lim, K.
Powiązania:
https://bibliotekanauki.pl/articles/1398739.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
72.80.L
73.61.P
78.20.C
78.30.J
Opis:
A new water-soluble ionic polyacetylene was synthesized by the acid-catalyzed polymerization of 2-ethynylpyridine using acrylic acid. The polymerization proceeded well to give a high yield of polymer. The acetylenic C ≡ C bond stretching (2110 cm¯¹) and acetylenic ≡ C-H bond stretching (3293 cm¯¹) peaks of 2-ethynylpyridine monomer were not seen in the FT-IR spectrum of polymer. The electro-optical and electrical properties of the ionic polyacetylene were measured and discussed. The resulting polymer showed strong maximum at 513 nm in the UV-Visible absorption, which is corresponding to photon energy of 2.42 eV. The energy gap width of polymer was estimated to be of 2.08 eV. It was observed that the electrochemical process of polymer is reproducible in the potential range of -1.80 to 1.60 V vs Ag/AgNO₃. HOMO and LUMO levels of polymer were 4.85 eV and 2.77 eV, respectively.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 642-646
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Growth of NdBa$\text{}_{2}$Cu$\text{}_{3}$O$\text{}_{7-δ}$ Superconducting Thin Films on SrTiO$\text{}_{3}$(100) and LaSrGaO$\text{}_{4}$(100) Substrates
Autorzy:
Park, J.-C.
Ha, D. H.
Kim, I.-S.
Park, Y.K.
Powiązania:
https://bibliotekanauki.pl/articles/1964239.pdf
Data publikacji:
1997-07
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
74.76.Bz
Opis:
NdBa$\text{}_{2}$Cu$\text{}_{3}$O$\text{}_{7-δ}$ superconducting thin films were grown on SrTiO$\text{}_{3}$(100) and LaSrGaO$\text{}_{4}$(100) substrates by off-axis rf sputtering and pulsed laser deposition. The effects of several deposition parameters, e.g. gas pressure, substrate temperature and energy density were studied. Thin films grown by off-axis rf sputtering were highly c-axis oriented, but those by pulsed laser deposition were predominantly a-axis oriented under our deposition conditions. However, the c-axis oriented portion for the films grown by pulsed laser deposition was increased by increasing the temperature above 800°C. T$\text{}_{c(zero)}$ was 87 K and 83 K for the c- and a-axis oriented films respectively. The critical current density of c-axis oriented films was 10$\text{}^{6}$-10$\text{}^{7}$ A/cm$\text{}^{2}$ below 60 K.
Źródło:
Acta Physica Polonica A; 1997, 92, 1; 105-114
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biological Evaluation of Anodized Biodegradable Magnesium-Calcium Alloys
Autorzy:
Kim, J.
Lee, J.
Lee, K.
Park, S.
Lim, H.
Park, C.
Bae, J.
Yun, K.
Powiązania:
https://bibliotekanauki.pl/articles/1398763.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
87.85.jj
87.85.J-
Opis:
The objective of this study was to evaluate the biocompatibility of studied binary magnesium-calcium (Mg-Ca) alloys for biodegradable intraosseous implants. Mg is necessary for health and is a non-toxic biodegradable material that decomposes naturally in the body. Nevertheless, Mg has been implicated in problems including diminished physical properties and corrosion resistance when degradation is too rapid prior to bone healing. This study has explored the effect of Ca on the corrosion resistance and biological evaluation after anodizing treatment with different contents of Ca alloy. Binary Mg-0.5Ca, Mg-1Ca and Mg-5Ca alloys were prepared by the casting method under an argon atmosphere and cut into disc-shaped pieces. Pure Mg alloy was used as the control. Anodic oxidation was performed for 15 minutes at a voltage of 120 V using an electrolyte solution containing Ca gluconate, sodium hexametaphosphate, and sodium hydroxide at room temperature. Corrosion resistance was analyzed using a corrosion tester. After a hydrogen evolution test, the surface pattern and phase changes were observed on a scanning electron microscop (SEM) and energy dispersive spectroscop (EDS). Microscopic evaluation of the adhesion and cell biological functions of Mg was conducted by observing the response of human fetal osteoblastic 1.19 cells with regard to changes in surface film properties, depending on the amount of Ca. Our results support the view that in Mg-xCa alloys (x=0.5, 1, 5 wt.%) treated using anodic oxidation, the increasing Ca content controls the rate of decomposition and improves corrosion resistance.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 728-735
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of High-Strength Gray Cast Iron Using Permanent Magnet Scrap
Autorzy:
Park, S.-Y.
Kim, J. H.
Seo, S. J.
On, J. S.
Lim, K. M.
Powiązania:
https://bibliotekanauki.pl/articles/352204.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gray cast iron
rare earth element
Nd-Fe-B magnet scrap
graphite formation
microstructure
Opis:
In this study, we have developed the manufacturing technology for high strength gray cast irons by using the spent permanent magnet scraps. The cast specimen inoculated by using a spent magnet scraps showed the excellent tensile strength up to 306MPa. This tensile strength value is 50MPa higher than that of the specimen cast without inoculation, and is similar to that of the specimen inoculated by using the expensive misch-metal. These superior mechanical properties are attributed to complex sulfides created during solidification that promote the formation and growth of Type-A graphite. It is therefore concluded that spent magnets scrap can provide an efficient and cost-effective inoculation agent for the fabrication of high-performance gray cast iron.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1113-1117
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Substituted Elements on Reflection Loss of Ba-Ferrite Nanoparticle
Autorzy:
Yang, S.
Jeong, K.-P.
Park, S.-Y.
Kim, J.-G.
Powiązania:
https://bibliotekanauki.pl/articles/352041.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ba ferrite
substitutional m-type ferrite
reflection loss
sol-gel
additional atom
Opis:
Due to the rapid development of the information communication industries, it is expected that next-generation mobile communication devices in the data communication environment will be used at the same time in the L~X band (1–12 GHz). To mutual electric wave interference prevention, research on wave absorbers in L~X band is needed. In this paper, barium ferrite was researched as L~X band wave absorber. The Barium ferrite (BaM, Ba ferrite) substituted by divalent ions (Co2+, Cu2+, Ni2+, Zn2+) and tetravalent ion (Ti4+). The substituted Ba ferrite nanoparticles were fabricated by sol-gel process. Lattice parameter, particle size, magnetic properties, and reflection loss were analyzed by X-ray diffraction (X-RD), a Vibrating Sample Magnetometer (VSM), and a Network Analyzer. Lattice parameter of Ba ferrite was changed 0.0005 to 0.0078 Å in a-b direction, and 0.0187 to0.0445 Å in c-direction by substituted elements, and it influenced on magnetic anisotropy. In addition, Co-Ti substitution elements influenced that coercive force decrease 5,739 to 2,240 Oe. Moreover, reflection loss frequencies were shifted from 16.3 GHz to 14.4 and 17.4 GHz by substituted elements Co-Ti and Zn-Ti.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1201-1204
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Characterization of Metallic Fuel Slugs Prepared by Modified Injection Casting
Autorzy:
Mun, S.-U.
Kim, K.-H.
Oh, S.-J.
Park, J.-Y.
Hong, S.-I.
Powiązania:
https://bibliotekanauki.pl/articles/351428.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sodium-cooled fast reactor
metallic fuel slug
U-Zr alloy
surface characterization
injection casting
Opis:
Metallic fuel slugs containing rare-earth (RE) elements have high reactivity with quartz (SiO2) molds, and a reaction layer with a considerable thickness is formed at the surface of metallic fuel slugs. The surface characterization of metallic fuel slugs is essential for safety while operating a fast reactor at elevated temperature. Hence, it is necessary to evaluate the surface characteristics of the fuel slugs so that chemical interaction between fuel slug and cladding can be minimized in the reactor. When the Si element causes a eutectic reaction with the cladding, it deteriorates the metallic fuel slugs. Thus, it is necessary to examine the characteristics of the surface reaction layer to prevent the reaction of the metallic fuel slugs. In this study, we investigated the metallurgical characteristics of the surface reaction layer of fabricated U-10wt.%Zr-Xwt.%RE (X = 0, 5, 10) fuel slugs using injection casting. The results showed that the thickness of the surface reaction layer increased as the RE content of the metallic fuel slugs increased. The surface reaction layer of the metallic fuel slug was mainly formed by RE, Zr and the Si, which diffused in the quartz mold.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 1049-1053
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Variable-Focus Fluid Lens Using an Electromagnetic Actuator
Autorzy:
Lee, J.
Park, K.
Choi, J.
Kim, H.
Kong, S.
Powiązania:
https://bibliotekanauki.pl/articles/1399681.pdf
Data publikacji:
2013-02
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
85.85.+j
42.79.Bh
Opis:
A variable-focus fluid lens controlled by an electromagnetic actuator and its characteristics are presented in this paper. The repulsive force between an NdFeB magnet and a solenoid through electromagnetic induction causes deflections in the elastomeric membranes integrated in the lens resulting in a focal-length change. The controllability of the focal length of the fabricated lens with an aperture size of 2 mm was approximately from infinity to 15 mm (with input current of 100 mA). The actuator including the solenoid was carefully designed to avoid thermal crosstalk of the lens fluid and magnet from the electromagnetic induction of the solenoid. The settling time to form a convex shape of the lens membrane was approximately 2.5 ms at an input current of 20 mA.
Źródło:
Acta Physica Polonica A; 2013, 123, 2; 202-204
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Maritime traffic characteristics in waterway with time variant CPA
Autorzy:
Jeong, J.S.
Park, G.K.
Kim, K. I.
Powiązania:
https://bibliotekanauki.pl/articles/320550.pdf
Data publikacji:
2013
Wydawca:
Polskie Forum Nawigacyjne
Tematy:
maritime traffic management
operation rate
risk assessment
collision
CPA
TCPA
Opis:
This paper aims at evaluating the collision risk between the encountering vessels under time- -variant CPA situations and then assessing the maritime traffic characteristics. Radar and AIS data are collected from Mokpo VTS in Korea. All crossing vessels that are navigating within CPA 1 miles of Mokpo-Gu waterway are analyzed. The maritime traffic characteristics is analyzed by surveying the distribution of CPA as a function of TCPA. To make it clear, the traffic operating rate in the Mokpo waterway is also computed. The averages of CPA and TCPA were observed until the encountered vessels pass safety each other after they come in a certain ship domain. As a consequence, the distribution of CPA as a function of TCPA gives a useful information to evaluate the maritime traffic safety.
Celem artykułu jest ocena ryzyka kolizji statków w funkcji zmiany wartości czasu do kolizji, a na tej podstawie oszacowanie charakterystyk determinujących ruch morski. Dane z radarów oraz systemu AIS zostały zarejestrowane w systemie VTS Mokpo w Korei. Przeanalizowano wszystkie przypadki przecinania się tras statków na podejściu do Mokpo-Gu w przypadku, gdy odległość minimalna (CPA) była mniejsza niż jedna mila morska. Charakterystyka ruchu morskiego opisana została poprzez wyznaczenie rozkładu wartości największego zbliżenia statków jako funkcji czasu do nadmiernego zbliżenia (TCPA). Dla pełnej jasności obliczono również współczynnik przepustowości drogi wodnej Mokpo. Opisano średnie wartości odległości największego zbliżenia oraz czasu do wystąpienia CPA bez względu na przekroczenia granic domeny obserwowanych statków. W konsekwencji wyznaczono rozkład wartości CPA jako funkcję TCPA, co okazuje się użyteczne dla oceny bezpieczeństwa ruchu morskiego.
Źródło:
Annual of Navigation; 2013, 20; 49-58
1640-8632
Pojawia się w:
Annual of Navigation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biodegradable Poly(Lactic Acid)/Multiwalled Carbon Nanotube Nanocomposite Fabrication Using Casting And Hot Press Techniques
Wytwarzanie biodegradowalnych nanokompozytów typu poli(kwas mlekowy)/wielościenne nanorurki węglowe technikami odlewania i prasowania na gorąco
Autorzy:
Park, S. G.
Abdal-Hay, A.
Lim, J. K.
Powiązania:
https://bibliotekanauki.pl/articles/356593.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
CNTs
biodegradable polymer
advanced polymer matrix composites
hot press
mechanical properties
polimer biodegradowalny
zaawansowane kompozyty polimerowe
prasowanie na gorąco
właściwości mechaniczne
Opis:
Biodegradable advanced polymer composites have recently received a large amount of attention. The present study aimed to design poly(lactic acid) multiwalled carbon nanotube nanocomposites (PLA/MWCNTs) using a simple fabrication technique. A PLA sheet was first dissolved in dichloromethane, and MWCNTs were subsequently added at various concentrations (0.5, 1.5 and 5%) while applying shear strain stirring to achieve dispersion of carbon nanotubes (CNTs). These solutions were then molded and a hot press was used to generate sheets free of voids with entrapped solvent. The prepared samples were characterized using field emission scanning electron microscopy (FE-SEM), x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). Our data showed composite samples free of defects and voids, indicating that the hot press is capable of generating sufficiently compact polymer matrices. Additionally, TGA and FTIR showed significant bonding interactions between the PLA matrix and the nano-fillers. Collectively, our results suggest that incorporation of CNTs as nano-fillers into biodegradable polymers may have multiple applications in many different sectors.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1557-1559
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High Temperature Oxidation Property of SiC Coating Layer Fabricated by Aerosol Deposition Process
Autorzy:
Ham, G.-S.
Kim, S.-H.
Park, J.-Y.
Lee, K.-A.
Powiązania:
https://bibliotekanauki.pl/articles/352142.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
silicon carbide
aerosol deposition
coating
high temperature oxidation
Opis:
This study investigated the high temperature oxidation property of SiC coated layer fabricated by aerosol deposition process. SiC coated layer could be successfully manufactured by using pure SiC powders and aerosol deposition on the Zr based alloy in an optimal process condition. The thickness of manufactured SiC coated layer was measured about 5 μm, and coating layer represented high density structure. SiC coated layer consisted of α-SiC and β-SiC phases, the same as the initial powder. The initial powder was shown to have been crushed to the extent and was deposited in the form of extremely fine particles. To examine the high temperature oxidation properties, oxidized weight gain was obtained for one hour at 1000°C by using TGA. The SiC coated layer showed superior oxidation resistance property than that of Zr alloy (substrate). The high temperature oxidation mechanism of SiC coated layer on Zr alloy was suggested. And then, the application of aerosol deposited SiC coated layer was also discussed.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1347-1351
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural and Optical Properties of Hydrothermally Synthesized ZnO and $Zn_{0.99}O:Eu^{3+}$ Powders
Autorzy:
Park, K.
Hakeem, D.
Kim, J.
Kim, Y.
Kim, S.
Powiązania:
https://bibliotekanauki.pl/articles/1398243.pdf
Data publikacji:
2018-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.55.-m
78.55.Hx
78.55.Et
Opis:
The structural and optical properties of the ZnO and $Zn_{0.99}O:Eu^{3+}$ powders synthesized by the hydrothermal method at two different temperatures (150°C and 250°C) were studied. The ZnO and $Zn_{0.99}O:0.01Eu^{3+}$ powders synthesized at 150 and 250°C showed rod- and flower-like morphologies, respectively. The as-synthesized and annealed ZnO and $Zn_{0.99}O:0.01Eu^{3+}$ powders formed the wurtzite crystal structure and P6₃mc space group. The crystallite size of the as-synthesized and annealed ZnO powders increased by the incorporation of $Eu^{3+}. The photoluminescence properties of annealed $Zn_{0.99}O:0.01Eu^{3+}$ powders were substantially improved by controlling the synthesis temperature. The annealed $Zn_{0.99}O:0.01Eu^{3+}$ powders synthesized at 250°C displayed much stronger emission intensity than those at 150°C.
Źródło:
Acta Physica Polonica A; 2018, 133, 4; 902-906
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The High Temperature Oxidation Stability of STS434L/Silicon Oxide Compacts
Autorzy:
Park, J. W.
Ko, B. H.
Jung, W. Y.
Park, D. K.
Ahn, I. S.
Powiązania:
https://bibliotekanauki.pl/articles/352481.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high-temperature oxidation stability
metallic oxide
densification
Opis:
In order to improve the high-temperature oxidation stability, a study of 434L sintered stainless steel was focused on the effect of addition of metallic oxides to form stable oxide film on the inner particle surface. In this paper, oxidation behavior of 434L compacted parts in accordance with the addition of metallic oxides were discussed with high temperature oxidative reaction, and sintering behavior analysis under 950°C. Oxidation weight gains of 434 L have increased as a form of parabolic laws. The hightemperature oxidation resistance was improved by the mixed addition of amorphous SiO2 and silica up to 2wt.%. The oxidation rate was decreased and kept constant after 60 hours. It was caused by the restraint succeeding oxidation due to the stable oxide formation of Cr2SiO4 phases on the particle surface to prevent densification and inhibition the external diffusion of Cr. High-temperature stability was confirmed by the electrical resistivity maintains the constant value of 1.3×10-2 Ω ·cm when the silica added less than 2w/o to 1w/o A-SiO2 added 434L.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 1; 307-313
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect Of Grain Size On The Mechanical Properties Of Aluminum
Wpływ wielkości ziarna na właściwości mechaniczne aluminium
Autorzy:
Jeong, G.
Park, J.
Nam, S.
Shin, S.-E.
Shin, J.
Bae, D.
Choi, H.
Powiązania:
https://bibliotekanauki.pl/articles/351200.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanocrystalline aluminum
grain size
microstructure
mechanical properties
tensile behavior
aluminium
wielkość ziarna
mikrostruktura
rozciąganie
właściwości mechaniczne
Opis:
Although many studies have focused on the unique plastic deformation behavior of nanocrystalline aluminum (e.g., the positive deviation from Hall-Petch relation, the unusual yield-drop phenomenon in tensile mode, etc.), the data reported by different research groups are inconsistent with each other, possibly because of different fabrication processes. In this study, aluminum samples with a wide grain-size spectrum – from a few micrometers down to 100 nanometers – are manufactured by powder metallurgy. The grain size was measured by X-ray diffraction analysis and transmission electron microscope observation. Furthermore, the tensile behavior, which varied according to a grain size, is discussed with a comparison of the theoretical models.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1287-1291
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microstructure Evolution of Ni-Based ODS Superalloy Powders During Horizontal Rotary Ball Milling
Autorzy:
Lee, H.-E.
Kim, Y. S.
Park, J. K.
Oh, S.-T.
Powiązania:
https://bibliotekanauki.pl/articles/355552.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high energy ball milling
Ni-base ODS superalloy
particle and crystalline size
microstructure
Opis:
Microstructure evolution of Ni-based oxide dispersion-strengthened alloy powders with milling time is investigated. The elemental powders having a nominal composition of Ni-15Cr-4.5Al-4W-2.5Ti-2Mo-2Ta-0.15Zr-1.1Y2O3 in wt % were ball-milled by using horizontal rotary ball milling with the change of milling velocity. Microstructure observation revealed that large aggregates were formed in the early stages of ball milling, and further milling to 5 h decreased particle size. The average crystalline size, estimated by the peak broadening of XRD, decreased from 28 nm to 15 nm with increasing milling time from 1 h to 5 h. SEM and EPMA analysis showed that the main elements of Ni and Cr were homogeneously distributed inside the powders after ball milling of 5 h.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1253-1255
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Allometric scaling of marbofloxacin pharmacokinetics: a retrospective analysis
Autorzy:
Yohannes, S.
Hossain, M.A.
Kim, J.Y.
Lee, S.J.
Kwak, D.M.
Suh, J.W.
Park, S.C.
Powiązania:
https://bibliotekanauki.pl/articles/31939.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
The association between physiologically dependent pharmacokinetic parameters (CLB, T1/2β, Vdss) of marbofloxacin and body weight was studied in eight animal species based on allometric equation Y = aWb, where ‘Y’ is the pharmacokinetic parameter, ‘W’ is body weight, ‘a’ is allometric coefficient (intercept) and ‘b’ is the exponent that describes relation between pharmacokinetic parameter and body weight. The body clearance of marbofloxacin has shown significant (P<0.0001) relation with size (Bwt) in various animal species. However, half-life and volume of distribution were not in association with body weight. Although half-life and volume of distribution were not in a good correlation with body weight, statistically significant association between the body clearance and body weight suggests validity of allometric scaling for predicting pharmacokinetic parameters of marbofloxacin in animal species that have not been studied yet. However further study considering large sample size and other parameters influencing pharmacokinetics of marbofloxacin is recommended.
Źródło:
Polish Journal of Veterinary Sciences; 2014, 17, 1
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Isotopic water separation using AGMD and VEMD
Autorzy:
Kim, J.
Park, S.
Kim, T.-S.
Jeong, D.-Y.
Ko, K.-H.
Powiązania:
https://bibliotekanauki.pl/articles/147314.pdf
Data publikacji:
2004
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
AGMD
VEMD
oxygen isotopes
PET
FDG
Opis:
The 18O isotopic water permeation and separation characteristics of a hydrophobic PTFE membrane using Air Gap Membrane Distillation (AGMD) and Vacuum Enhanced Membrane Distillation (VEMD) were investigated. Permeation fluxes were measured by weighing the collected membrane-permeated water vapor. 18O/16O of each water sample was analyzed by the Tunable Diode Laser Absorption Spectroscopy (TDLAS). We observed the effects of the air filled membrane pores and the temperature gradient applied to the membrane surfaces on the vapor permeation flux and the oxygen isotope separation for the first time. For both AGMD and VEMD, the permeation flux and the degree of 18O separation increased as the membrane interfacial temperature gradient increased. Even though, oxygen isotope separation and the permeation flux for VEMD is slightly higher than AGMD, the latter may be more efficient from the system's operational point of view.
Źródło:
Nukleonika; 2004, 49, 4; 137-142
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication of Mo-Si-B Intermetallic Compound Powders Under Different Heat Treatment Conditions
Autorzy:
Park, J. H.
Lee, S.
Kim, D.
Kim, Y.
Yang, S. H.
Lee, S. H.
Powiązania:
https://bibliotekanauki.pl/articles/353369.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Mo-Si-B alloys
intermetallic compounds
reitveld refinement
T2 phase
A15 phase
Opis:
In this research, we investigated the effects of reduction atmospheres on the creation of the Mo-Si-B intermetallic compounds (IMC) during the heat treatments. For outstanding anti-oxidation and elevated mechanical strength at the ultrahigh temperature, we fabricated the uniformly dispersed IMC powders such as Mo5SiB2 (T2) and Mo3Si (A15) phases using the two steps of chemical reactions. Especially, in the second procedure, we studied the influence of the atmospheres (e.g. vacuum, argon, and hydrogen) on the synthesis of IMCs during the reduction. Furthermore, the newly produced IMCs were observed by SEM, XRD, and EDS to identify the phase of the compounds. We also calculated an amount of IMCs in the reduced powders depending on the atmosphere using the Reitveld refinement method. Consequently, it is found that hydrogen atmosphere was suitable for fabrication of IMC without other IMC phases.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1509-1512
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of pier contact accident in busan new port of south Korea by System-Theoretic Accident Model and Processes (STAMP)
Autorzy:
Kim, S. R.
Wamugi, W. J.
Camliyurt, G.
Kim, D. W.
Park, Y. S.
Powiązania:
https://bibliotekanauki.pl/articles/24201437.pdf
Data publikacji:
2023
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
maritime accidents
investigation on maritime accidents
accident analysis
System-Theoretic Accident Model and Process
maritime safety
safety at sea
pilotage
lesson
Opis:
Marine accidents are caused by complex and diverse causes. Therefore, it is necessary to analyse accidents from the perspective of the whole system rather than the existing analysis models that focus on cause-effect. The STAMP analysis is a constraint-based model that focuses on improper management or enforcement of safety-related constraints in system operation. Thus, as a case study of the application of the STAMP technique in marine accident analysis, the Milano Bridge pier contact accident that occurred on April 6, 2020 in Busan New Port of South Korea was analysed by the STAMP technique in this study. Through this study, it was proposed to break away from the domestic accident investigation, which focused only on the punishment of the ship operator, and to suggest improvements that enable organizations related to the marine accidents to take initiative to take efforts for safety.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2023, 17, 2; 299--304
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Wyświetlanie 1-25 z 39

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies