Skocz do pozycji: 1.

Tytuł:

Valorization of Cobalt from Waste LIB Cathode through Cobalt Oxalate and Cobalt Oxide Synthesis by Leaching-Solvent Extract-Precipitation Stripping

Autorzy:

Swain, B.
Lee, J.-C.
Lee, C.-G.

Powiązania:

https://bibliotekanauki.pl/articles/352333.pdf

Data publikacji:

2018

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

valorization of cobalt
cobalt oxide powder
rod-shaped cobalt oxalate
precipitation stripping

Opis:

An ecoefficient, economical and sustainable valorization process for the synthesis of Co₃O₄ from waste lithium-ion battery (LIB) by leaching-solvent extract-scrubbing-precipitation stripping route has been developed. Through an optimization, the waste LIB cathode was leached using 2000 mole/m³ of H₂SO₄ and 5 Vol. % of the H₂O₂ at a pulp density of 100 kg/m³ under leaching time 60 minutes and temperature 75°C. From the separated leach liquor, cobalt was purified by saponified Cyanex 272. From cobalt, loaded Cyanex 272 impurities were scrubbed and the CoC₂O₄·2H₂O was recovered through precipitation stripping. Finally, the precipitate was calcined to synthesize Co₃O₄, which is a precursor for LIB cathode materials manufacturing. From TGA-DTA, followed by XRD analysis it was confirmed that at 200°C the CoC₂O₄·2H₂O can be converted to anhydrous CoC₂O₄ and at 350°C the anhydrous can be converted to Co₃O₄ and at 1100°C the Co₃O₄ can be converted to CoO. Through reported route waste LIB can back to LIB manufacturing process through a versatile and flexible industrial approach.

Źródło:

Archives of Metallurgy and Materials; 2018, 63, 2; 1037-1042
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 2.

Tytuł:

Cardiac Autonomic Control during Alternate Nostril Breathing in Subjects Novice to Yoga Practice

Autorzy:

Ghiya, Shreya
Lee, C. Matthew

Powiązania:

https://bibliotekanauki.pl/articles/1167049.pdf

Data publikacji:

2018

Wydawca:

Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN

Tematy:

Alternate nostril breathing
Anulom-Vilom breathing
Pranayama
Slow breathing
Yoga

Opis:

Objectives: To examine heart rate variability during alternate nostril breathing (ANB) in a group of individuals novice to yoga practice and to compare the effects of ANB to that of paced breathing (PB) at the same respiratory rate. Design: The study involved randomized repeated measures of two different breathing patterns. Participants: Twenty healthy individuals (22.3 ± 2.9 years) participated. Intervention: Subjects were asked to rest for 5 minutes (PRE-ANB and PRE-PB) before they participated in two different breathing exercises (ANB and PB) in a random order for 30 min. Outcome Measures: Heart rate (HR), mean arterial pressure (MAP) and heart rate variability (HRV) were measured during PRE-ANB, PRE-PB, ANB, and PB and compared using analysis of variance. HRV was reported as frequency and time domain parameters. Total power (TP; 0.0-0.4 Hz), low- (LF; 0.04-0.15 Hz), and high-frequency (HF; 0.15-0.40 Hz) ranges were selected and were natural log (ln) transformed. Time domain variables such as RMSSD, pNN50, and SDNN were also reported. Results: There was a main effect of breathing condition on HR and MAP (p < 0.05 for both) such that HR was higher during PRE-ANB and ANB compared to PRE-PB and PB and that MAP was greater during ANB compared to the other conditions. There were main effects of time on lnTP, lnLF, and lnHF (p < 0.001 for all) such that lnTP and lnLF were greater and lnHF was lower during ANB and PB compared to the PRE conditions. There was a breathing x time interaction on lnLF/lnHF (p <0.05) such that it was greater during PB compared to ANB and that it was greater during ANB and PB compared to PRE-ANB and PRE-PB. There was a main effect of breathing on pNN50 such as that it was lower during Pre ANB and ANB. There was also a main effect of time on SDNN such that it was higher during PB and ANB. No significant changes were noted in RMSSD measurements during any conditions. Conclusions: During both ANB and PB, there was a decrease in parasympathetic and/or increase sympathetic control of the heart. Additionally, ANB may result in less of a reduction in parasympathetic control than PB.

Źródło:

World Scientific News; 2018, 105; 134-144
2392-2192

Pojawia się w:

World Scientific News

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 3.

Tytuł:

A Study Of The Die Roll Height Of SHP-1 And SCP-1 Materials In The Fine Blanking Process
Badanie wysokości deformacji krawędzi wycinanych elementów ze stali SHP-1 i SCP-1 procesie wykrawania

Autorzy:

Lee, C. K.
Kim, Y. C.

Powiązania:

https://bibliotekanauki.pl/articles/356499.pdf

Data publikacji:

2015

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

die roll
fine blanking
SCP-1
share speed
SHP-1
v-rings
krawędzie
wykrawanie
szybkość działania
deformacja

Opis:

The height of the die roll, the distance of the V-ring, and the shear rate were varied with the aim of investigating the effects of the applied changes on the fine blanking line in a cold-rolled and a pickled steel sheet, referred to as SCP-1 and SHP-1, respectively. Both materials consisted primarily of a ferrite phase with small amounts of impurities including F, Mn, and Cr. The distance was found to be a very important factor in controlling the shear of the V-ring in the fine blanking process. When the position of the V-ring was set at distances of 1.5 mm and 2 mm, the die roll height increased with increasing shear speeds from 6.4 m/min to 10 and 16 m/min. Analysis of the influence of the shear rate revealed that low rates resulted in the lowest die roll heights since the flow of material was effectively inhibited.

Źródło:

Archives of Metallurgy and Materials; 2015, 60, 2B; 1397-1402
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 4.

Tytuł:

Development of Carbon Nanotube Based Reflection Type X-ray Source

Autorzy:

Choi, H.
Kim, J.
Lee, C.

Powiązania:

https://bibliotekanauki.pl/articles/1807922.pdf

Data publikacji:

2009-06

Wydawca:

Polska Akademia Nauk. Instytut Fizyki PAN

Tematy:

75.47.Lx
75.47.Gk
73.50.Fq

Opis:

X-ray imaging technology is a useful and leading medical diagnostic tool for health care professionals to diagnose disease in human body. Carbon nanotube based X-ray source, which we have developed in this study, could be also useful and supply integrated diagnostic X-ray imaging tool in diagnosis. Conventionally, thermionic type of tungsten filament X-ray tube is widely employed in the field of biomedical and industrial application fields. However, intrinsic problems, such as poor emission efficiency, low imaging resolution, and high electrical energy consumption etc., may cause the limitation of using the X-ray tube. To fulfill the current market requirement, specifically for medical diagnostic field, we have developed rather a portable and compact carbon nanotube based X-ray device in which microfocus high imaging resolution can be feasible.

Źródło:

Acta Physica Polonica A; 2009, 115, 6; 1078-1080
0587-4246
1898-794X

Pojawia się w:

Acta Physica Polonica A

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 5.

Tytuł:

A Study on the Optimal Design of Air Pockets in an Air Bearing Applied Tilting Index Table

Autorzy:

Lee, M.-J
Lee, C.-M

Powiązania:

https://bibliotekanauki.pl/articles/971152.pdf

Data publikacji:

2009

Wydawca:

Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych

Tematy:

optimal design
tilting index table
air bearing
air pocket

Opis:

The tilting index table has attached to CNC machining center with 3axes, it can be improvement of its performance and its machining efficiency. The tilting index table is a key unit in order to manufacture some non-rotational and 3-dimensional parts, using the conventional machining center. The tilting index table is directly connected to a processing object. Regarding the increase in the deflection of the table, it directly affects processing objects and increases errors and that makes impossible to obtain desired processing precision. Thus, this study performed the shape optimization of air pockets in order to minimize the deflection presented in the existing table. In the numerical optimizing method for implementing optimal design, the general full factorial design and response surface method in the design of experiments were used. A finite element analysis was used for computational experiments in which the finite element analysis was performed by using the ANSYS Workbench, which is a type of commercial FEM tool. In addition, the analysis of the results was performed by using the commercial program, Minitab 15. The results show that the optimum design results is better than those of the initial design.

Źródło:

Journal of Machine Engineering; 2009, 9, 2; 114-123
1895-7595
2391-8071

Pojawia się w:

Journal of Machine Engineering

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 6.

Tytuł:

Safety Management in a Relationship-Oriented Culture

Autorzy:

Hsu, S. H.
Lee, C. C.

Powiązania:

https://bibliotekanauki.pl/articles/91057.pdf

Data publikacji:

2012

Wydawca:

Centralny Instytut Ochrony Pracy

Tematy:

safety management
safety climate
relationship-oriented culture
high-risk industry
safety culture

Opis:

A relationship-oriented culture predominates in the Greater China region, where it is more important than in Western countries. Some characteristics of this culture influence strongly the organizational structure and interactions among members in an organization. This study aimed to explore the possible influence of relationships on safety management in relationship-oriented cultures. We hypothesized that organizational factors (management involvement and harmonious relationships) within a relationship-oriented culture would influence supervisory work (ongoing monitoring and task instructions), the reporting system (selective reporting), and teamwork (team communication and co-ordination) in safety management at a group level, which would in turn influence individual reliance complacency, risk awareness, and practices. We distributed a safety climate questionnaire to the employees of Taiwanese high-risk industries. The results of structural equation modeling supported the hypothesis. This article also discusses the findings and implications for safety improvement in countries with a relationship-oriented culture.

Źródło:

International Journal of Occupational Safety and Ergonomics; 2012, 18, 1; 35-45
1080-3548

Pojawia się w:

International Journal of Occupational Safety and Ergonomics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 7.

Tytuł:

A Study on Changes in Thickness of STS304 Material in the Progressive Drawing Process

Autorzy:

Lee, C. K.
Kim, Y. C.

Powiązania:

https://bibliotekanauki.pl/articles/356710.pdf

Data publikacji:

2017

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

body thickness
drawing
flange thickness
corner roundness
material thickness

Opis:

In the drawing process, the roundness of corners in the punch and the die are very important factors in determining the thicknesses of the product. The results clearly revealed that the thickness of a flange was increased and the thickness of body parts reduced when the roundness of the die entrance was small. The material thickness of the top part was decreased when the corner roundness of the punch was large. The smooth inflow of materials was found to have a significant effect on the thickness during the post-process. The compressive strength of STS 304 material exhibited a higher value compared with other processing methods. Moreover, we clearly observed the corner roundness of the punch and the die to be a very important factor for STS 304 materials.

Źródło:

Archives of Metallurgy and Materials; 2017, 62, 2B; 1319-1323
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 8.

Tytuł:

Enhancement of Drilling Safety and Quality Using Online Sensors and Artificial Neural Networks

Autorzy:

Liu, T.- I.
Kumagai, A.
Lee, C.

Powiązania:

https://bibliotekanauki.pl/articles/90529.pdf

Data publikacji:

2003

Wydawca:

Centralny Instytut Ochrony Pracy

Tematy:

drilling safety
online sensors
artificial neural networks
bezpieczeństwo pracy
ocena ryzyka zawodowego
wiertnictwo
sieci neuronowe

Opis:

Cutting force sensors and neural networks have been used for the occupational safety of the drilling process. The drill conditions have been online classified into 3 categories: safe, caution, and danger. This approach can change the drill just before its failure. The inputs to neural networks include drill size, feed rate, spindle speed, and features that were extracted from drilling force measure-ments. The outputs indicate the safety states. This detection system can reach a success rate of over 95%. Furthermore, the one misclassification during online tests was a one-step ahead pre-alarm that is acceptable from the safety and quality viewpoint. The developed online detection system is very robust and can be used in very complex manufacturing environments.

Źródło:

International Journal of Occupational Safety and Ergonomics; 2003, 9, 1; 37-56
1080-3548

Pojawia się w:

International Journal of Occupational Safety and Ergonomics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 9.

Tytuł:

Late Ordovician trilobites from the Xiazhen Formation in Zhuzhai, Jiangxi Province, China

Autorzy:

Lee, D.-C.

Powiązania:

https://bibliotekanauki.pl/articles/20075.pdf

Data publikacji:

2013

Wydawca:

Polska Akademia Nauk. Instytut Paleobiologii PAN

Opis:

Trilobites from mudstone of the Upper Ordovician Xiazhen Formation of South China are described. The reef−associated, unique fauna comprises 25 species, 14 genera, and ten families. Five new species are named: Remopleurides xiazhenensis sp. nov., Hibbertia aodiensissp. nov., Vietnamia yushanensissp. nov., Ceraurinus zhuzhaiensissp. nov., and Pliomerina tashanensis sp. nov. The paucity of trilobites in reef−associated carbonates is interpreted that the trilobites diversified after the reef system decimated. Compared to the Late Ordovician trilobite faunas in other areas of South China, the Xiazhen mudstone fauna is unique in that the phacopids including Vietnamia, Ceraurinus, and Pliomerina account for 75% of the specimens collected. The occurrence of the same trilobite assemblage at different sampling localities along the dip direction of the formation suggests that the outcrops may be overlapped due to structural movement. The Xiazhen trilobite fauna is unique among the Late Ordovician fauna in that it is predominated by phacopids and associated with reef.

Źródło:

Acta Palaeontologica Polonica; 2013, 58, 4
0567-7920

Pojawia się w:

Acta Palaeontologica Polonica

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 10.

Tytuł:

A study on the development of a new grinding processes for high-lead ball screw nuts

Autorzy:

Choi, Ch.
Ha, Y.
Kim, H.
Lee, C.

Powiązania:

https://bibliotekanauki.pl/articles/99599.pdf

Data publikacji:

2010

Wydawca:

Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych

Tematy:

high-lead ball screw nuts
new grinding process
surface roughness

Opis:

This paper proposes a method that machines the race of high-lead ball screw nuts, which is difficult to machine using the existing geometrical machining method, without any interferences and changes in its load rating in order to perform the high-speed in ball screws. This study calculates the inclination angle of the axis of the grinding stone for avoiding the contact of the axis to the inner diamete of the nut and determines the shape of the grinding stone through changing the inclination angle and dressing curvature determined in a dressing device Then, the grinding condition will be determined by measuring the shape meter of the screw race for solving the problem. Also, the surface roughness of the grinded surface was measured using a surface roughness tester, and check with applying a grinding process of product not being high-lead ball screw.

Źródło:

Journal of Machine Engineering; 2010, 10, 1; 50-57
1895-7595
2391-8071

Pojawia się w:

Journal of Machine Engineering

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 11.

Tytuł:

Synthesis, Structure, Photoluminescence, and Raman Spectrum of Indium Oxide Nanowires

Autorzy:

Kim, H.
Na, H.
Yang, J.
Lee,, C.

Powiązania:

https://bibliotekanauki.pl/articles/1505485.pdf

Data publikacji:

2011-02

Wydawca:

Polska Akademia Nauk. Instytut Fizyki PAN

Tematy:

81.07.-b
78.55.-m

Opis:

Production of indium oxide $(In_2O_3)$ whiskers at a very low temperature of 650°C was reported. The synthetic route was comprised of a thermal heating process of a mixture of In and Mg powders. We have investigated the structural properties of the as-synthesized nanowires by using X-ray diffraction and scanning electron microscopy. The product consisted of one-dimensional nanowires, with a crystalline cubic structure of $In_2O_3$. The photoluminescence measurement with the Gaussian fitting exhibited visible light emission bands centered at 2.1 eV and 2.8 eV. The peaks of the Raman spectrum were indexed to the modes being associated with cubic $In_2O_3$.

Źródło:

Acta Physica Polonica A; 2011, 119, 2; 143-145
0587-4246
1898-794X

Pojawia się w:

Acta Physica Polonica A

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 12.

Tytuł:

Rapid Synthesis of Gold Nano-Particles Using Pulse Waved Potential in a Non-Aqueous Electrolyte

Autorzy:

Jang, J. G.
Lee, J.-O.
Lee, C. K.

Powiązania:

https://bibliotekanauki.pl/articles/352529.pdf

Data publikacji:

2017

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

gold
nanoparticle
nonaqueous electrolyte
pulse wave
catalyst

Opis:

Rapid synthesis of gold nanoparticles (AuNPs) by pulsed electrodeposition was investigated in the non-aqueous electrolyte, 1-ethyl-3-methyl-imidazoliumbis(trifluoro- methanesulfonyl)imide ([EMIM]TFSI) with gold trichloride (AuCl₃). To aid the dissolution of AuCl₃, 1-ethyl-3-methyl-imidazolium chloride ([EMIM]Cl) was used as a supporting electrolyte in [EMIM]TFSI. Cyclicvoltammetry experiments revealed a cathodic reaction corresponding to the reduction of gold at −0.4 V vs. Pt-QRE. To confirmthe electrodeposition process, potentiostatic electrodeposition of gold in the non-aqueous electrolyte was conducted at −0.4 V for 1 h at room temperature. To synthesize AuNPs, pulsed electrodeposition was conducted with controlled duty factor, pulse duration, and overpotential. The composition, particle-size distribution, and morphology of the AuNPs were confirmed by field-emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), and transmission electron microscopy (TEM). The electrodeposited AuNPs were uniformly distributed on the platinum electrode surface without any impurities arising from the non-aqueous electrolyte. The size distribution of AuNPs could be also controlled by the electrodeposition conditions.

Źródło:

Archives of Metallurgy and Materials; 2017, 62, 2B; 1389-1392
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 13.

Tytuł:

An Experimental Study on the Determination of Optimal Lubrication Conditions in a High-Speed Spindle

Autorzy:

Park, S.-J.
Hwang, Y.-K
Lee, C.-M

Powiązania:

https://bibliotekanauki.pl/articles/971161.pdf

Data publikacji:

2009

Wydawca:

Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych

Tematy:

optimal lubrication condition
oil-air lubrication
high speed spindle

Opis:

The heat generation inside spindles becomes a major factor that limits the allowable maximum rotational speed in machine tools and decreases the cutting quality. It is necessary to accurately estimate the temperature distribution in spindles caused by the heat generation in bearings and its heat transfer characteristics in order to perform the high-speed and high-precision in high-speed spindles. In addition, an accurate correction process is required according to the results of the estimation through investigating the thermal deformation error. A commercial program, MINITAB, was used to establish an experiment plan that analyzes the heat generation characteristics of the spindle system according to the operation and lubrication conditions of the spindle. Also, the change in the outer ring temperature of bearings was measured according to the experimental plan. After establishing a response surface model using the results of the experiment, the estimation equation of the quadratic polynomial model was proposed for determining the optimal lubrication condition. A verification experiment was applied to verify the accuracy of the experimental equation determined by the estimated regression model and the experimental value used in the estimation of the regression model.

Źródło:

Journal of Machine Engineering; 2009, 9, 2; 106-113
1895-7595
2391-8071

Pojawia się w:

Journal of Machine Engineering

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 14.

Tytuł:

On the monitoring system of collision risks among multiple ships

Autorzy:

Son, N. S.
Kim, S. Y.
Lee, C. S.

Powiązania:

https://bibliotekanauki.pl/articles/320903.pdf

Data publikacji:

2012

Wydawca:

Polskie Forum Nawigacyjne

Tematy:

collision risk among multiple ships

Opis:

To reduce crewmembers’ error and increase the safety of ships’ navigation, a recognition system of collision risks among multiple ships is newly-developed. By using ships’ navigational information such as AIS data, an algorithm to calculate collision risks among multiple ships is newly-designed. Collision risks of multiple ships can be estimated considering ships’ position and course of now and future by using fuzzy algorithm. To evaluate the performance of new system, replay simulation is carried out by using actual AIS data of actual collision accident in Korea. In this paper, main features of the monitoring system of collision risks and the results of replay simulation are discussed.

Źródło:

Annual of Navigation; 2012, No. 19, part 1; 149-163
1640-8632

Pojawia się w:

Annual of Navigation

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 15.

Tytuł:

Effect of Surfactant Addition on Bi2Te3 Nanostructures Synthesized by Hydrothermal Method

Autorzy:

Dharmaiah, P.
Lee, C. H.
Madavali, B.
Hong, S.-J.

Powiązania:

https://bibliotekanauki.pl/articles/351609.pdf

Data publikacji:

2017

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

bismuth telluride
hydrothermal synthesis
spark plasma sintering
thermoelectric materials
X-ray diffraction

Opis:

In the present work, we have prepared Bi₂Te₃ nanostructures with different morphologies such as nano-spherical, nanoplates and nanoflakes obtained using various surfactant additions (EG, PVP, and EDTA) by a hydrothermal method. The shape of the nanoparticles can be controlled by addition of surfactants. The samples were characterized by x-ray diffraction (XRD) and scanning electron microscopy (SEM). It is found that the minority BiOCl phase disappears after maintained pH at 10 with EG as surfactant. SEM bulk microstructure reveals that the sample consists of fine and coarse grains. Temperature dependence of thermoelectric properties of the nanostructured bulk sample was investigated in the range of 300-450K. The presence of nanograins in the bulk sample exhibits a reduction of thermal conductivity and less effect on electrical conductivity. As a result, a figure of merit of the sintered bulk sample reached 0.2 at 400 K. A maximum micro Vickers hardness of 102 Hv was obtained for the nanostructured sample, which was higher than the other reported results.

Źródło:

Archives of Metallurgy and Materials; 2017, 62, 2B; 1005-1010
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 16.

Tytuł:

Development of a high-speed air bearing spindle

Autorzy:

Ha, Y.-H.
Lee, D.-W.
Hwang, Y.-K.
Lee, C.-M.

Powiązania:

https://bibliotekanauki.pl/articles/1429126.pdf

Data publikacji:

2008

Wydawca:

Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych

Tematy:

aerostatic bearing
metal foam
porous thrust bearing
porous radial bearing

Opis:

This paper investigates an air spindle with both radial and thrust air bearings of newly developing one-directional porous materials. At present, orifice type and porous type are adopted for thrust air bearings. Orifice type thrust air bearing is fabricated by machining several micro-holes on a bearing pad bearing, permeability significantly affected by particle size and machining conditions is an important factor of performance, but it is hard to c porosities is suggested. It has many micro-porosities through axial direction, so stable and plenty of air can be supplied to the thrust bearing pad. A radial air bearing also can be substituted by a radial direction porous bearing as the same reason. In case of driving parts, built-in motor type is widely applied. But it needs additional cooling parts to drop heat from a motor. So application of an air turbine drive with light-weight shaft is suggested and additionally it will reduce fabricating cost.

Źródło:

Journal of Machine Engineering; 2008, 8, 4; 25-31
1895-7595
2391-8071

Pojawia się w:

Journal of Machine Engineering

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 17.

Tytuł:

Photoluminescence Studies of Aluminum Nitride Nanowires

Autorzy:

Yang, J.
Na, H.
Kim, H.
Kebede, M.
Choi, R.
Jeong, J.
Lee, C.

Powiązania:

https://bibliotekanauki.pl/articles/1505466.pdf

Data publikacji:

2011-02

Wydawca:

Polska Akademia Nauk. Instytut Fizyki PAN

Tematy:

81.07.-b
78.55.-m

Opis:

We report the production of AlN nanowires by the thermal heating method, for exploring their photoluminescence properties. The room-temperature photoluminescence properties were investigated with different annealing environment. While broad emissions with peaks at around 2.45 and 2.95 eV were obtained from both unannealed and annealed samples, the additional 2.1 eV peak was found from the annealed samples. We have suggested the possible emission mechanisms based on the assumption that both 2.45 eV peak and 2.1 eV peak are ascribed to the nitrogen vacancies. Annealing in N_2 environment exhibited lower intensities of 2.45 eV peak and 2.1 eV peak in comparison to those in Ar environment, presumably due to the suppression of nitrogen vacancies.

Źródło:

Acta Physica Polonica A; 2011, 119, 2; 125-127
0587-4246
1898-794X

Pojawia się w:

Acta Physica Polonica A

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 18.

Tytuł:

Characterization of Cladding Hull Wastes from Used Nuclear Fuels
Charakterystyka odpadów z okładzin reaktora wodnego ciśnieniowego

Autorzy:

Kang, K. H.
Lee, C. H.
Jeon, M. K.
Han, S. Y.
Park, G. I.
Hwang, S.-M.

Powiązania:

https://bibliotekanauki.pl/articles/357036.pdf

Data publikacji:

2015

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

used nuclear fuels
metal waste
cladding hulls
zircaloy
radioactivity
reaktor wodny ciśnieniowy
odpady metalowe
odpady z okładzin
radioaktywność

Opis:

Used cladding hulls from pressurized water reactor (PWR) are characterized to provide useful information for the treatment and disposal of cladding hull wastes. The radioactivity and the mass of gamma emitting nuclides increases with an increase in the fuel burn-up and their removal ratios are found to be more than 99 wt.% except Co-60 and Cs-137. In the result of measuring the concentrations of U and Pu included in the cladding hull wastes, most of the residues are remained on the surface and the removal ratio of U and Pu are revealed to be over 99.98 wt.% for the fuel burn-up of 35,000 MWd/tU. An electron probe micro-analyzer (EPMA) line scanning shows that radioactive fission products are penetrated into the Zr oxide layer, which is proportional to the fuel burn-up. The oxidative decladding process exhibits more efficient removal ratio of radionuclides.

Źródło:

Archives of Metallurgy and Materials; 2015, 60, 2B; 1199-1203
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 19.

Tytuł:

Structural Properties and Mechanical Behavior of the 2 Step-Reinforced Al-Si/SiCp Metal Matrix Composite by Titanium-Fiber

Autorzy:

Oak, J.-J.
Lee, Y. C.
Park, Y. H.

Powiązania:

https://bibliotekanauki.pl/articles/356010.pdf

Data publikacji:

2017

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

metal matrix composite
sintering
Ti fiber
mechanical properties
diffusion

Opis:

In this study, the newly designed Al-9Si/SiC particles (SiC_p) + Ti-fiber (2step-reinforced Al-9Si alloy matrix) metal matrix composites (MMCs) were fabricated by hot-pressing sintering at 560°C. 2step-reinforced Al-based MMCs were characterized by thermal shrinkage, phase transition, microstructure and tensile strength. The addition of Ti-fiber reduced thermal shrinkage was caused by temperature difference in sintering process as well as enhanced assistance for tensile strength and plastic deformation at room temperature. Experimental results reveal that the 2step-reinforcment sintering by ceramic and metal has a significant effect to increase interface bonding in boundary of each component material and the improved mechanical properties were due to the influence of interfacial product by diffusion. Tensile strength and elongation at room temperature by 2step-reinforcement were improved in 19.5% and 26.2% more than those of Al-9Si/SiC_p, respectively. Especially, it reveals that diffusion direction may be varied by sintering methods at low temperature in this study.

Źródło:

Archives of Metallurgy and Materials; 2017, 62, 2B; 1089-1097
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 20.

Tytuł:

Carbon Co-Deposition During Gas Reduction of Water-Atomized Fe-Cr-Mo Powder

Autorzy:

Ali, B.
Choi, S. H.
Seo, S. J.
Maeng, D. Y.
Lee, C. G.
Kim, T. S.
Park, K. T.

Powiązania:

https://bibliotekanauki.pl/articles/352709.pdf

Data publikacji:

2017

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

water atomization
Fe-based powder
oxide reduction
powder metallurgy
sinter-hardening alloys

Opis:

The water atomization of iron powder with a composition of Fe-3Cr-0.5Mo (wt.%) at 1600°C and 150 bar creates an oxide layer, which in this study was reduced using a mixture of methane (CH₄) and argon (Ar) gas. The lowest oxygen content was achieved with a 100 cc/min flow rate of CH₄, but this also resulted in a co-deposition of carbon due to the cracking of CH₄. This carbon can be used directly to create high-quality, sinter hardenable steel, thereby eliminating the need for an additional mixing step prior to sintering. An exponential relationship was found to exist between the CH₄ gas flow rate and carbon content of the powder, meaning that its composition can be easily controlled to suit a variety of different applications.

Źródło:

Archives of Metallurgy and Materials; 2017, 62, 2B; 1119-1124
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 21.

Tytuł:

Effect of Trace Elements (Co, Cr) on the Microstructure and Physical Properties of Al-Si-Cu-Mg-Fe Extruded Alloy

Autorzy:

Ahn, S. S.
Sharief, P.
Lee, C. H.
Son, H. T.
Kim, Y. H.
Kim, Y. C.
Hong, S.
Hong, S. J.

Powiązania:

https://bibliotekanauki.pl/articles/352787.pdf

Data publikacji:

2019

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

Al-Si alloy
microstructure
extrusion
coefficient of thermal expansion
trace elements

Opis:

Trace elements Co, Cr were added to investigate their influence on the microstructure and physical properties of Al-Si extruded alloy. The Co, Cr elements were randomly distributed in the matrix, forms intermetallic phase and their existence wereconfirmed by XRD, EDS and SEM analysis. With addition of trace elements, the microstructure was modified, Si particle size was reduced and the growth rate of β-(Al₅ FeSi) phase limited. Compared to parent alloy, hardness and tensile strength were enhanced while the linear coefficient of thermal expansion (CTE) was significantly reduced by 42.4% and 16.05% with Co and Cr addition respectively. It is considered that the low CTE occurs with addition of Co was due to the formation of intermetallic compound having low coefficient of thermal expansion. The results suggested that Co acts as an effective element in improving the mechanical properties of Al-Si alloy.

Źródło:

Archives of Metallurgy and Materials; 2019, 64, 3; 857-862
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 22.

Tytuł:

System Identification from Multiple-Trial Data Corrupted by Non-Repeating Periodic Disturbances

Autorzy:

Phan, M. Q.
Longman, R. W.
Lee, S. C.
Lee, J. W.

Powiązania:

https://bibliotekanauki.pl/articles/908209.pdf

Data publikacji:

2003

Wydawca:

Uniwersytet Zielonogórski. Oficyna Wydawnicza

Tematy:

automatyka
robotyka
system identification
disturbance identification
iterative learning control
repetitive control
interaction matrix

Opis:

Iterative learning and repetitive control aim to eliminate the effect of unwanted disturbances over repeated trials or cycles. The disturbance-free system model, if known, can be used in a model-based iterative learning or repetitive control system to eliminate the unwanted disturbances. In the case of periodic disturbances, although the unknown disturbance frequencies may be the same from trial to trial, the disturbance amplitudes, phases, and biases do not necessarily repeat. Furthermore, the system may not return to the same initial state at the end of each trial before starting the next trial. In spite of these constraints, this paper shows how to identify the system disturbance-free dynamics from disturbance-corrupted input-output data collected over multiple trials without having to measure the disturbances directly. The system disturbance-free model can then be used to identify the disturbances as well, for use in learning or repetitive control. This paper represents the first extension of the interaction matrix approach to the multiple-trial environment of iterative learning control.

Źródło:

International Journal of Applied Mathematics and Computer Science; 2003, 13, 2; 185-192
1641-876X
2083-8492

Pojawia się w:

International Journal of Applied Mathematics and Computer Science

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 23.

Tytuł:

Reduced expression of AURKA in peripheral blood of breast cancer patients

Autorzy:

Goh, L.P.W.
See, E.U.H.
Chua, K.H.
Lee, P.-C.

Powiązania:

https://bibliotekanauki.pl/articles/81279.pdf

Data publikacji:

2018

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

breast cancer
patient
Aurora kinase
gene expression
peripheral blood
cell cycle
quantitative real-time polymerase chain reaction

Źródło:

BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2018, 99, 1
0860-7796

Pojawia się w:

BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 24.

Tytuł:

Efficient online handwritten Chinese character recognition system using a two-dimensional functional relationship model

Autorzy:

Chang, Y. F.
Lee, J. C.
Mohd Rijal, O.
Syed Abu Bakar, S. A. R.

Powiązania:

https://bibliotekanauki.pl/articles/908140.pdf

Data publikacji:

2010

Wydawca:

Uniwersytet Zielonogórski. Oficyna Wydawnicza

Tematy:

2D
współczynnik determinacji
rozpoznawanie
pismo odręczne
pismo chińskie
falka Haara
model relacyjny
2D functional classifier
coefficient of determination
handwritten Chinese character recognition
Haar wavelet
multidimensional functional relationship model

Opis:

This paper presents novel feature extraction and classification methods for online handwritten Chinese character recognition (HCCR). The X-graph and Y-graph transformation is proposed for deriving a feature, which shows useful properties such as invariance to different writing styles. Central to the proposed method is the idea of capturing the geometrical and topological information from the trajectory of the handwritten character using the X-graph and the Y-graph. For feature size reduction, the Haar wavelet transformation was applied on the graphs. For classification, the coefficient of determination [...] from the two-dimensional unreplicated linear functional relationship model is proposed as a similarity measure. The proposed methods show strong discrimination power when handling problems related to size, position and slant variation, stroke shape deformation, close resemblance of characters, and non-normalization. The proposed recognition system is applied to a database with 3000 frequently used Chinese characters, yielding a high recognition rate of 97.4% with reduced processing time of 75.31%, 73.05%, 58.27% and 40.69% when compared with recognition systems using the city block distance with deviation (CBDD), the minimum distance (MD), the compound Mahalanobis function (CMF) and the modified quadratic discriminant function (MQDF), respectively. High precision rates were also achieved.

Źródło:

International Journal of Applied Mathematics and Computer Science; 2010, 20, 4; 727-738
1641-876X
2083-8492

Pojawia się w:

International Journal of Applied Mathematics and Computer Science

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 25.

Tytuł:

Finite element analysis of three-point bending of a T-beam structural biaxial highly oriented polymer material
Analiza metodą elementów skończonych zginania trójpunktowego belki teowej wykonanej z wysoko zorientowanego dwuosiowo materiału polimerowego

Autorzy:

Wei, C.-L.
Chang, Y.
Lee, Y.-C.
Lee, R.
Luo, T.-W.
Chen, J.-H.

Powiązania:

https://bibliotekanauki.pl/articles/946988.pdf

Data publikacji:

2018

Wydawca:

Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej

Tematy:

solid phase processing
highly oriented polymer (HOP)
orthotropic materials
T-beam
three-point bending
finite element
proces w fazie stałej
wysoko zorientowany polimer
materiały ortotropowe
belka teowa
zginanie trójpunktowe
elementy skończone

Opis:

Polymers with biaxial aligned molecular chains are also orthotropic materials, which are characterized by high tensile strength and low shear strength in the length direction. When orthotropic materials are used as structural shapes with poor shear strength, they are likely to undergo premature failure under shear stress. Therefore, in three-point bending, the cross-section of the entire profile not only bears tensile stress and compressive stress in the length direction, but also simultaneously exhibits shear stress. This study analyzes the distribution of tensile stress, compressive stress and shear stress in the length direction of highly oriented polymers (HOP) by finite element analysis to find the most suitable length-to-height ratio for these materials when used as structural shapes. The finite element analysis software, Abaqus, is utilized to simulate HOP T-beam to analyze the load stress of a T-beam. With a fixed cross–section area, as the length of the material changes, its shear strength also changes. Accordingly, the order of occurrence of tensile failure and shear failure can be investigated. The simulation reveals that when the length-to-height ratio is between 4 : 1 and 20 : 1, a zone of stress in which tensile failure and shear failure occur can be found. This result can be exploited in the design and development of structural beam.
Polimery o dwuosiowo zorientowanych łańcuchach makrocząsteczek są materiałami ortotropowymi, wykazującymi dużą wytrzymałość na rozciąganie oraz niewielką wytrzymałość na ścinanie w kierunku długości. Elementy konstrukcyjne wytworzone z materiału ortotropowego o małej wytrzymałości na ścinanie są podatne na przedwczesne uszkodzenie pod wpływem naprężeń ścinających. Przy zginaniu trójpunktowym w przekroju ich profilu występują zarówno naprężenia rozciągające i ściskające w kierunku podłużnym, jak i naprężenia ścinające. Metodą elementów skończonych analizowano rozkład naprężeń rozciągających, ściskających i ścinających w kierunku podłużnym wysoko zorientowanych polimerów (HOP) w celu określenia optymalnego stosunku długości do wysokości w kształtach konstrukcyjnych. Do symulacji naprężeń obciążeniowych w zginaniu trójpunktowym belki teowej wykorzystano program komputerowy Abaqus. Stwierdzono, że przy stałej powierzchni przekroju poprzecznego belki jej wytrzymałość na ścinanie zmienia się wraz ze zmianą długości. Badano również kolejność występowania uszkodzeń pod wpływem działania sił rozciągających i ścinających. Symulacja wykazała, że przy stosunku długości do wysokości w zakresie od 4 : 1 do 20 : 1 występuje strefa naprężeń, w której mogą się pojawiać uszkodzenia w wyniku rozciągania lub ścinania. Uzyskane wyniki można wykorzystać w projektowaniu i optymalizacji belek konstrukcyjnych.

Źródło:

Polimery; 2018, 63, 3; 219-223
0032-2725

Pojawia się w:

Polimery

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 26.

Tytuł:

Characterization Of The Graded Microstructure In Powder Sintered Porous Titanium
Charakterystyka gradientowej mikrostruktury porowatego tytanu spiekanego z proszku

Autorzy:

Oak, J.-J.
Bang, J. I.
Bae, K.-C.
Kim, Y. H.
Lee, Y. C.
Chun, H. H.
Park, Y. H.

Powiązania:

https://bibliotekanauki.pl/articles/356239.pdf

Data publikacji:

2015

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

titanium
powder metallurgy
porous structure
sintering
biomaterial
tytan
metalurgia proszków
struktura porowata
spiekanie
biomateriał

Opis:

The proposed sintering process produce porosity and functional graded microstructure in the sinterd titanium powders. Titanium powders with different micro sizes were sintered at the proposed temperature region at 1200 and 1300°C for 2h. The apatite-forming on the graded microstructure is observed by immersion test in Hanks balanced salt soluion at 37°C. Sintering condition of titanium powders is estimated by thermogravitmetry-differential thermal analysis (TG-DTA). The synthersied surface structures and apatite-forming ability were characterized by a field emission scanning electron microscopy (FE-SEM) observation and energy dispersive X-ray spectroscopy (EDS) analysis. As results, these graded microstructure of sintered porous titanium powders reveals apatite-forming ability as osseointegration by calcification in Hanks balanced salt soluion(HBSS) at 37°C.

Źródło:

Archives of Metallurgy and Materials; 2015, 60, 2B; 1265-1269
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 27.

Tytuł:

Supercontinuum fiber laser source for water quality and heavy metals detection

Autorzy:

Teh, P. C.
Ho, Y. H.
Ong, C. E.
Lee, S. C.
Lo, P. K.
Lai, K. C.
Yeap, K. H.
Loh, S. H.
Teh, P. S.
Tey, K. L.

Powiązania:

https://bibliotekanauki.pl/articles/174135.pdf

Data publikacji:

2017

Wydawca:

Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej

Tematy:

supercontinuum generation
master oscillator power amplifier
nonlinear optics
transmittance measurement
heavy metal contaminants

Opis:

We report a compact, all fiber, 150 ps fiber master oscillator power amplifier operating at 1064 nm that has the ability of producing a maximum average output power of 2.16 W with peak power as high as 10 kW. The output from the master oscillator power amplifier is spliced with a highly nonlinear photonic crystal fiber, generating a supercontinuum with an average power of 250 mW at repetition rate of 1 MHz and spectrum bandwidth spanning from 600 to 1700 nm. The developed supercontinuum system is used to detect the presence of heavy metal contaminants in water by a simple light transmittance method to ensure that the water is free from heavy metal contaminants and safe for consumption. The supercontinuum laser source was shone onto a water sample with a detector placed at another end in order to measure the transmitted supercontinuum light. By measuring the amount of light attenuated at particular wavelength, the concentration of heavy metal contaminants present in the water sample could be determined.

Źródło:

Optica Applicata; 2017, 47, 3; 445-456
0078-5466
1899-7015

Pojawia się w:

Optica Applicata

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 28.

Tytuł:

A Study On Dispersion Stability Of Nickel Nanoparticles Synthesized By Wire Explosion In Liquid Media
Badanie stabilności dyspersji nanocząstek niklu wytworzonych metodą WEP w ciekłym medium

Autorzy:

Kim, C. K.
Lee, G.-J.
Lee, M. K.
Rhee, C. K.

Powiązania:

https://bibliotekanauki.pl/articles/356909.pdf

Data publikacji:

2015

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

nickel nanofluid
pulsed wire evaporation
surfactant
zeta potential
dispersion stability
nanocząstka niklu
środek powierzchniowo czynny
stabilność dyspersji
potencjał zeta
dyspersja

Opis:

In this study, nickel nanoparticles were synthesized in ethanol using portable pulsed wire evaporation, which is a one-step physical method. From transmission electron microscopy images, it was found that the Ni nanoparticles exhibited a spherical shape with an average diameter of 7.3 nm. To prevent aggregation of the nickel nanoparticles, a polymer surfactant was added into the ethanol before the synthesis of nickel nanoparticles, and adsorbed on the freshly synthesized nickel nanoparticles during the wire explosion. The dispersion stability of the prepared nickel nanofluids was investigated by zeta-potential analyzer and Turbiscan optical analyzer. As a result, the optimum concentration of polymer surfactant to be added was suggested for the maximized dispersion stability of the nickel nanofluids.

Źródło:

Archives of Metallurgy and Materials; 2015, 60, 2B; 1379-1382
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 29.

Tytuł:

Non-parametric machine learning methods for evaluating the effects of traffic accident duration on freeways

Autorzy:

Lee, Y.
Wei, C.-H.
Chao, K.-C.

Powiązania:

https://bibliotekanauki.pl/articles/223569.pdf

Data publikacji:

2017

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

accident on freeway
accident duration
effect evaluating
correlation
artificial neural networks
k-nearest neighbour method
wypadek na autostradzie
czas trwania wypadku
ocena skutków
korelacja
sztuczne sieci neuronowe
metoda najbliższego sąsiada

Opis:

Traffic accidents usually cause congestion and increase travel-times. The cost of extra travel time and fuel consumption due to congestion is huge. Traffic operators and drivers expect an accurately forecasted accident duration to reduce uncertainty and to enable the implementation of appropriate strategies. This study demonstrates two non-parametric machine learning methods, namely the k-nearest neighbour method and artificial neural network method, to construct accident duration prediction models. The factors influencing the occurrence of accidents are numerous and complex. To capture this phenomenon and improve the performance of accident duration prediction, the models incorporated various data including accident characteristics, traffic data, illumination, weather conditions, and road geometry characteristics. All raw data are collected from two public agencies and were integrated and cross-checked. Before model development, a correlation analysis was performed to reduce the scale of interrelated features or variables. Based on the performance comparison results, an artificial neural network model can provide good and reasonable prediction for accident duration with mean absolute percentage error values less than 30%, which are better than the prediction results of a k-nearest neighbour model. Based on comparison results for circumstances, the Model which incorporated significant variables and employed the ANN method can provide a more accurate prediction of accident duration when the circumstances involved the day time or drunk driving than those that involved night time and did not involve drunk driving. Empirical evaluation results reveal that significant variables possess a major influence on accident duration prediction.

Źródło:

Archives of Transport; 2017, 43, 3; 91-104
0866-9546
2300-8830

Pojawia się w:

Archives of Transport

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 30.

Tytuł:

Microstructure Evolution of Tungsten-Based ODS Alloys Reinforced with the γ(Ni, Fe) Phase by a Secondary Ball Milling Method

Autorzy:

Chen, C.
Zeng, Y.
Lee, J.

Powiązania:

https://bibliotekanauki.pl/articles/1375180.pdf

Data publikacji:

2014-10

Wydawca:

Polska Akademia Nauk. Instytut Fizyki PAN

Tematy:

81.20.Ev
81.20.Wk
81.07.Bc
81.05.Ni

Opis:

In the current study, $W-5Ni-2Fe-Y_2O_3$ model alloys were produced using a high-energy planetary ball mill. The presence of the γ(Ni, Fe) phase is favored with respect to material properties in this alloy. Therefore, a secondary ball milling method was introduced to obtain a fine and uniformly distributed γ(Ni, Fe) phase. Phase development of mechanical alloyed powders was investigated by X-ray diffraction. The results show that the formation of the γ(Ni, Fe) phase was found after 18 h of a pre-milling procedure. A further secondary milling method produced a uniform microstructure with grain refinement. TEM results also show changes in the lattice parameters of the tungsten and γ(Ni, Fe) phase associated with the solid solubility limits in the alloy produced by secondary ball milling.

Źródło:

Acta Physica Polonica A; 2014, 126, 4; 907-911
0587-4246
1898-794X

Pojawia się w:

Acta Physica Polonica A

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 31.

Tytuł:

Analysis of Working Postures at a Construction Site Using the OWAS Method

Autorzy:

Lee, T. H.
Han, C. S.

Powiązania:

https://bibliotekanauki.pl/articles/90807.pdf

Data publikacji:

2013

Wydawca:

Centralny Instytut Ochrony Pracy

Tematy:

construction
posture
occupational injury
OWAS
budownictwo
pozycja przy pracy
analiza bezpieczeństwa

Opis:

This study used OWAS to analyze the working postures of construction workers on building the foundations of a log cabin. Three construction workers, with an average work experience of 40 years, participated in this study. Eight elementary jobs of building the foundations of a log cabin were videotaped at a construction site and analyzed later in the laboratory. For an overall distribution of trunk postures, OWAS identified that a bent and twisted trunk posture (34%), which fell into action category 3, was the major poor posture for construction workers. This study also identified that tying beams with steel bars, assembling column templates, and cement grouting of the ground were the 3 principal jobs in which workers building the foundations exhibited poor working posture. This article suggests ways to reduce and evaluate poor posture in a dynamic construction site.

Źródło:

International Journal of Occupational Safety and Ergonomics; 2013, 19, 2; 245-250
1080-3548

Pojawia się w:

International Journal of Occupational Safety and Ergonomics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 32.

Tytuł:

Grip Force and Heart Rate Responses to Manual Carrying Tasks: Effects of Material, Weight, and Base Area of the Container

Autorzy:

Lee, T. H.
Tseng, C. Y.

Powiązania:

https://bibliotekanauki.pl/articles/91134.pdf

Data publikacji:

2014

Wydawca:

Centralny Instytut Ochrony Pracy

Tematy:

liquid
solid
carriage
manual materials handling
pracownik fizyczny
chwyt
transport ręczny

Opis:

This study recruited 16 industrial workers to examine the effects of material, weight, and base area of container on reduction of grip force (ΔGF) and heart rate for a 100-m manual carrying task. This study examined 2 carrying materials (iron and water), 4 carrying weights (4.4, 8.9, 13.3, 17.8 kg), and 2 base areas of container (24 ´ 24 cm, 35 ´ 24 cm). This study showed that carrying water significantly increased ΔGF and heart rate as compared with carrying iron. Also, ΔGF and heart rate significantly increased with carrying weight and base area of container. The effects of base area of container on ΔGF and heart rate were greater in carrying water condition than in carrying iron condition. The maximum dynamic effect of water on ΔGF and heart rate occurred when water occupied ~60%–80% of full volume of the container.

Źródło:

International Journal of Occupational Safety and Ergonomics; 2014, 20, 3; 377-383
1080-3548

Pojawia się w:

International Journal of Occupational Safety and Ergonomics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 33.

Tytuł:

Flexion and Extension Angles of Resting Fingers and Wrist

Autorzy:

Lee, K.-S.
Jung, M.- C.

Powiązania:

https://bibliotekanauki.pl/articles/90396.pdf

Data publikacji:

2014

Wydawca:

Centralny Instytut Ochrony Pracy

Tematy:

finger
wrist
resting posture
angle
palce
nadgarstek
kąt zgięcia
pozycja odpoczynku

Opis:

This study determined flexion and extension angles of resting fingers and wrist in terms of forearm posture (neutral, pronation and supination) and shoulder flexion (0°, 45°, 90° and 135°). The participants participated in 12 angle measurements for 16 finger joints and wrist. The finger joints flexed more in supination than in neutral posture and pronation and the thumb flexed more than the other fingers because of the gravity and skin tension. This phenomenon became more apparent as the shoulder flexed. The carpometacarpal joint had the largest flexion angle in the thumb joints, whereas the proximal interphalangeal joints had the largest flexion angles in the other finger joints. The resting posture of the wrist extended of ~16° in any forearm postures when the shoulder was at 0°. The results of this study could be useful for rehabilitation tool and product designs.

Źródło:

International Journal of Occupational Safety and Ergonomics; 2014, 20, 1; 91-101
1080-3548

Pojawia się w:

International Journal of Occupational Safety and Ergonomics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 34.

Tytuł:

Investigation of the peat-fired power generation in Ireland
Badania NORM w energetyce opartej na spalaniu torfu w Irlandii

Autorzy:

Organo, C.
Lee, E.
Menezes, G.

Powiązania:

https://bibliotekanauki.pl/articles/340264.pdf

Data publikacji:

2004

Wydawca:

Główny Instytut Górnictwa

Tematy:

ochrona radiologiczna w Irlandii
Dyrektywa 96/29/Euratom
spalanie torfu
naturalne izotopy promieniotwórcze
radiological protection in Ireland
Directive 96/29/Euratom
peat-fired
naturally occurring isotopes

Źródło:

Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2004, 1; 16-18
1643-7608

Pojawia się w:

Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 35.

Tytuł:

Applying LCS to affective image classification in spatial - frequency domain

Autorzy:

Lee, P. -M.
Hsiao, T.-C.

Powiązania:

https://bibliotekanauki.pl/articles/91808.pdf

Data publikacji:

2014

Wydawca:

Społeczna Akademia Nauk w Łodzi. Polskie Towarzystwo Sieci Neuronowych

Tematy:

image classification
pattern recognition
Hilbert-Huang transform
HHT
empirical mode decomposition
EMD
Hilbert transform
HT
Extended Classifier Systems
XCSs
Area Under Curve
AUC
Radial-Basis Function Network
RBF Network
LCS

Opis:

Recent studies have utilizes color, texture, and composition information of images to achieve affective image classification. However, the features related to spatial-frequency domain that were proven to be useful for traditional pattern recognition have not been tested in this field yet. Furthermore, the experiments conducted by previous studies are not internationally-comparable due to the experimental paradigm adopted. In addition, contributed by recent advances in methodology, that are, Hilbert-Huang Transform (HHT) (i.e. Empirical Mode Decomposition (EMD) and Hilbert Transform (HT)), the resolution of frequency analysis has been improved. Hence, the goal of this research is to achieve the affective image-classification task by adopting a standard experimental paradigm introduces by psychologists in order to produce international-comparable and reproducible results; and also to explore the affective hidden patterns of images in the spatial-frequency domain. To accomplish these goals, multiple human-subject experiments were conducted in laboratory. Extended Classifier Systems (XCSs) was used for model building because the XCS has been applied to a wide range of classification tasks and proved to be competitive in pattern recognition. To exploit the information in the spatial-frequency domain, the traditional EMD has been extended to a two-dimensional version. To summarize, the model built by using the XCS achieves Area Under Curve (AUC) = 0.91 and accuracy rate over 86%. The result of the XCS was compared with other traditional machine-learning algorithms (e.g., Radial-Basis Function Network (RBF Network)) that are normally used for classification tasks. Contributed by proper selection of features for model building, user-independent findings were obtained. For example, it is found that the horizontal visual stimulations contribute more to the emotion elicitation than the vertical visual stimulation. The effect of hue, saturation, and brightness; is also presented.

Źródło:

Journal of Artificial Intelligence and Soft Computing Research; 2014, 4, 2; 99-123
2083-2567
2449-6499

Pojawia się w:

Journal of Artificial Intelligence and Soft Computing Research

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 36.

Tytuł:

An Empirical Investigation of the Influence of Safety Climate on Organizational Citizenship Behavior in Taiwan’s Facilities

Autorzy:

Lee, T. Z.
Wu, C. H.
Hong, C. W.

Powiązania:

https://bibliotekanauki.pl/articles/91216.pdf

Data publikacji:

2007

Wydawca:

Centralny Instytut Ochrony Pracy

Tematy:

safety climate
organizational citizenship behavior
social exchange relationship
psychological effect

Opis:

Although the social exchange relationships between employers and employees are increasingly important to the performance of safety management systems, the psychological effects of work attitudes on this relationship have been less studied. Using a sample of first-line operators and their supervisors from 188 facilities in Taiwan which had Occupational Health and Safety Assessment Series 18000 (OHSAS 18000) certification, the current research conducted an empirical investigation of the influence of safety climate on organizational citizenship behavior (OCB). Work attitude was used to disclose the psychological effect. Research results indicated that (a) safety climate was a significant predicator of OCB, (b) the psychological effect significantly influenced social exchange relationships, and (c) job satisfaction showed a stronger mediating influence than organizational commitment due to the frequent top management turnover. Discussions and implications are also addressed.

Źródło:

International Journal of Occupational Safety and Ergonomics; 2007, 13, 3; 255--269
1080-3548

Pojawia się w:

International Journal of Occupational Safety and Ergonomics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 37.

Tytuł:

Effect of Laser Preheating AISI 4140 Specimens for Micro-Forging

Autorzy:

Jung, C.
Lee, M. G.
Jeon, Y.

Powiązania:

https://bibliotekanauki.pl/articles/351766.pdf

Data publikacji:

2017

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

laser preheating
micro-forging
fatigue strength
ultrasonic fatigue test
hardness

Opis:

Many high performance and permanent service parts require suitable material characteristics-high fatigue strength is one of the most important characteristics. For this reason, surface treatment processes are essential to increase the material performance and avoid the use of costly ineffective material. There exist various surface treatment processes for various applications. Each process has advantages and disadvantages and hybridization can solve various problems. The micro-forging process delivers a controlled and uniform surface hardness, but the depth of the forged surface is limited. On the other hand, laser heat treatment can increase the hardness drastically, but the surface may become brittle, which reduces the fatigue life. Laser-assisted micro-forging is a novel hybrid process of laser heat treatment and micro-forging that has the potential to increase the forging depth and relax the stress caused by the high temperature of the forging process. This study examines the effect of laser preheating in the micro-forging of AISI 4140. The processes were varied as follows: no treatment, micro-forging only, and laser-assisted micro-forging. The fatigue strength of the specimens was examined by means of an ultrasonic fatigue tester and then compared. The microstructural changes were investigated with respect to the processes by using scanning electron microscopy. In conclusion, it was confirmed that the laser preheating auxiliary forging affects the fatigue life. It was confirmed that the fatigue life was the mostly increased in 550°C temperature laser preheating micro forging process and the temperature was identified as the most important factor.

Źródło:

Archives of Metallurgy and Materials; 2017, 62, 2B; 1209-1213
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 38.

Tytuł:

Effect Of Heat-Treatment On Microstructure And Magnetic Properties Of Nanocrystallized Mn-Zn Ferrite Powders
Wpływ obróbki cieplnej na mikrostrukturę i właściwości magnetyczne nanokrystalicznych proszków ferrytu Mn-Zn

Autorzy:

Lee, W. H.
Hong, C. S.
Chang, S. Y.

Powiązania:

https://bibliotekanauki.pl/articles/351552.pdf

Data publikacji:

2015

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

high energy ball milling
nanosized particles
crystallite size
magnetic properties
frezowanie kulowe
nanocząstki
wielkości krystalitów
właściwości magnetyczne

Opis:

The initial ferrite powders were subjected to high energy ball milling at 300rpm for 3h, and subsequently heat-treated at 573-1273K for 1h. Based on the observation of microstructure and measurement of magnetic properties, the heat-treatment effect was investigated. The size of initial powders was approximately 70μm. After milling, the powders with approximately 230nm in size were obtained, which were composed of the nano-sized particles of approximately 15nm in size. The milled powders became larger to approximately 550nm after heat-treatment at 973K. In addition, the size of particles increased to approximately 120nm with increasing temperature up to 973K. The coercivity of initial powders was almost unchanged after milling, whereas the saturation magnetization increased. As the heat-treatment temperature increased, the saturation magnetization gradually increased and the maximum coercivity was obtained at 773K.

Źródło:

Archives of Metallurgy and Materials; 2015, 60, 2B; 1347-1350
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 39.

Tytuł:

Enhancement of Life Time of the Dimensionally Stable Anode for Copper Electroplating Applications

Autorzy:

Son, S. H.
Park, S. C.
Lee, M. S.

Powiązania:

https://bibliotekanauki.pl/articles/356684.pdf

Data publikacji:

2017

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

dimensionally stable anode
surface treatment
life time
copper
electrodeposition

Opis:

In order to enhance the long-term stability of DSA for copper electroplating process, in the present study, noble metal oxides with excellent electrochemical properties was used and optimum condition was determined the ratio of noble metal oxides, surface pre-treatment of titanium substrate and heat treatment. The effect of the surface pretreatment of titanium substrate and ratio of noble metal oxides were estimated by accelerated test at the highly current density conditions. The lifetime of DSA increase six-fold higher as the oxide thickness of Ta 7 : Ir 3 composition ratio. Under the optimal condition, surface pretreatment led to dramatic increase in the lifetime of DSA.

Źródło:

Archives of Metallurgy and Materials; 2017, 62, 2B; 1019-1022
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 40.

Tytuł:

The key factors of selecting electronics manufacturing service suppliers - an example of company u in Taiwan

Autorzy:

Chiu, H. -F.
Lee, T. -R.
Kao, C. -K.

Powiązania:

https://bibliotekanauki.pl/articles/407004.pdf

Data publikacji:

2015

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

Electronics Manufacturing Service
evaluation criteria
AHP based approach
key factors

Opis:

In a highly competitive environment with a developed network, the customers of electronics manufacturing service (EMS) manufacturers always seek a wide range of choices. EMS manufacturers can attract loyal customers and establish long-term partnerships if they understand and satisfy their customers’ needs to execute a response plan successfully with limited resources. If these conditions are met, EMS manufacturers can create high customer equity. This study investigates how the demand of downstream enterprises can be satisfied on the basis of the opinion of upstream suppliers in the electronics manufacturing industry. Domestic and foreign literature related to the dimensions and elements of supplier evaluation criteria were investigated to extract 22 elements of supplier selection by corporate customers. Five supplier evaluation dimensions were then established through interviews with the internal experts of the case company. An analytic hierarchy process-based (AHPbased) approach is used to design the questionnaire for the external corporate customers of the case company. The questionnaire is then used to investigate the supplier evaluation criteria of the customers of EMS manufacturers. Conclusions and suggestions are provided on the basis of the results to provide the case company with references that can be used to develop and maintain customer relationship and create high customer equity.

Źródło:

Management and Production Engineering Review; 2015, 6, 4; 4-14
2080-8208
2082-1344

Pojawia się w:

Management and Production Engineering Review

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 41.

Tytuł:

Biological Evaluation of Anodized Biodegradable Magnesium-Calcium Alloys

Autorzy:

Kim, J.
Lee, J.
Lee, K.
Park, S.
Lim, H.
Park, C.
Bae, J.
Yun, K.

Powiązania:

https://bibliotekanauki.pl/articles/1398763.pdf

Data publikacji:

2016-04

Wydawca:

Polska Akademia Nauk. Instytut Fizyki PAN

Tematy:

87.85.jj
87.85.J-

Opis:

The objective of this study was to evaluate the biocompatibility of studied binary magnesium-calcium (Mg-Ca) alloys for biodegradable intraosseous implants. Mg is necessary for health and is a non-toxic biodegradable material that decomposes naturally in the body. Nevertheless, Mg has been implicated in problems including diminished physical properties and corrosion resistance when degradation is too rapid prior to bone healing. This study has explored the effect of Ca on the corrosion resistance and biological evaluation after anodizing treatment with different contents of Ca alloy. Binary Mg-0.5Ca, Mg-1Ca and Mg-5Ca alloys were prepared by the casting method under an argon atmosphere and cut into disc-shaped pieces. Pure Mg alloy was used as the control. Anodic oxidation was performed for 15 minutes at a voltage of 120 V using an electrolyte solution containing Ca gluconate, sodium hexametaphosphate, and sodium hydroxide at room temperature. Corrosion resistance was analyzed using a corrosion tester. After a hydrogen evolution test, the surface pattern and phase changes were observed on a scanning electron microscop (SEM) and energy dispersive spectroscop (EDS). Microscopic evaluation of the adhesion and cell biological functions of Mg was conducted by observing the response of human fetal osteoblastic 1.19 cells with regard to changes in surface film properties, depending on the amount of Ca. Our results support the view that in Mg-xCa alloys (x=0.5, 1, 5 wt.%) treated using anodic oxidation, the increasing Ca content controls the rate of decomposition and improves corrosion resistance.

Źródło:

Acta Physica Polonica A; 2016, 129, 4; 728-735
0587-4246
1898-794X

Pojawia się w:

Acta Physica Polonica A

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 42.

Tytuł:

AC Microcalorimetry of Superconducting $MgCNi_3$ Single Crystals

Autorzy:

Kačmarčík, J.
Pribulová, Z.
Samuely, P.
Marcenat, C.
Klein, T.
Jang, D.
Lee, H.
Lee, S.

Powiązania:

https://bibliotekanauki.pl/articles/1813689.pdf

Data publikacji:

2008-01

Wydawca:

Polska Akademia Nauk. Instytut Fizyki PAN

Tematy:

74.70.Ad
74.25.Bt

Opis:

The low-temperature specific heat of single-crystal samples of superconducting $MgCNi_3$ with typical dimensions 200 μm were measured for the first time. A computer controlled ac microcalorimeter using an optical fiber and an infrared light-emitting diode as the heat source was used down to 2 K at magnetic fields up to 8 T. The specific heat data suggest a moderate coupling in $MgCNi_3$.

Źródło:

Acta Physica Polonica A; 2008, 113, 1; 363-366
0587-4246
1898-794X

Pojawia się w:

Acta Physica Polonica A

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 43.

Tytuł:

Investigation of Localized Electric Field in the Type-II InAs/GaAsSb/GaAs Structure

Autorzy:

Lee, S.
Kim, J.
Yoon, S.
Kim, Y.
Honsberg, C.

Powiązania:

https://bibliotekanauki.pl/articles/1398577.pdf

Data publikacji:

2016-11

Wydawca:

Polska Akademia Nauk. Instytut Fizyki PAN

Tematy:

78.66.Fd
78.40.-q
73.40.Lq
73.50.Pz

Opis:

The effect of localized electric field (F) was investigated in the type-II InAs/GaAsSb/GaAs structures. To compare type-I to type-II, two types of samples with different Sb contents was grown by molecular beam epitaxy, whose Sb contents are 3% (type-I) and 16% (type-II), respectively. In the both samples, we performed excitation power dependent-photoreflectance at 10 K and the result showed that the period of the Franz-Keldysh oscillation, revealed above the band gap $(E_{g})$ of GaAs, was broadened in the only type-II system, which means that F was also increased because it is proportional to the period of the Franz-Keldysh oscillation while the period of the Franz-Keldysh oscillations stayed unchanged in type-I system. This phenomenon is explained by that the F was affected by the band bending effect caused by the spatially separated photo-excited carriers in the interface between GaAsSb and GaAs. The F changed linearly as a function of square root of excitation power as expected for the F. Moreover, F was calculated using fast Fourier transform method for a qualitative analysis, which is in a good agreement with the theory of triangular well approximation.

Źródło:

Acta Physica Polonica A; 2016, 130, 5; 1213-1216
0587-4246
1898-794X

Pojawia się w:

Acta Physica Polonica A

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 44.

Tytuł:

High Temperature Deformation Flow Of A ZK60A Magnesium Alloy After Extrusion
Płynięcie stopu magnezu ZK60A podczas wysokotemperaturowego odkształcenia w trakcie wytłaczania

Autorzy:

Kawasaki, M.
Lee, H. J.
Oh, M. C.
Ahn, B.

Powiązania:

https://bibliotekanauki.pl/articles/354374.pdf

Data publikacji:

2015

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

activation energy
extrusion
flow mechanics
magnesium alloy
tensile property
energia aktywacji
wytłaczanie
mechanika przepływu
stop magnezu
rozciąganie

Opis:

Flow behavior of a ZK60A magnesium alloy after continuous casting and subsequent extrusion was examined in tension at a range of strain rates of 3.0×10^-6 − 1.0×10^-2 s^-1 at temperatures of 473-623K. The results demonstrated that the alloy exhibited a maximum elongation of ~250% at 523K when tested at an initial strain rate of 1.0×10^-5 s^-1 and strain rate sensitivity, m, of ~0.3-0.4 and the activation energy of ~94 kJ/mol were calculated under the testing conditions. The detailed investigation suggested that the high temperature flow of the ZK60A alloy having submicrometer grains demonstrates quasi-superplastic flow behavior controlled by a dislocation viscous glide process.

Źródło:

Archives of Metallurgy and Materials; 2015, 60, 2B; 1327-1330
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 45.

Tytuł:

Morphology Change Of Si Deposit In Molten Salt Electrorefining
Zmiana morfologii osadu Si podczas elektrorafinacji w stopionych solach

Autorzy:

Ryu, H. Y.
Kwon, S. C.
Han, M. H.
An, Y. S.
Lee, J. S.
Lee, J. H.

Powiązania:

https://bibliotekanauki.pl/articles/354346.pdf

Data publikacji:

2015

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

molten salt
silicon
morphology
electrorefining
current density
sól stopiona
krzem
morfologia
elektrorafinacja
gęstość prądu

Opis:

The effects of processing parameters on the morphology change in a Si deposit recovered by means of molten salt electrorefining are evaluated using electrochemical techniques such as cyclic voltammetry and chronopotentiometry at 800°C. It was found that concentration of K₂SiF₆ and current density were important parameters in determining deposit size. Higher concentrations of K₂SiF₆ were effective in coarsening the silicon deposit and decreasing the cell potential. Silicon nanofiber was recovered at 5 wt% of K₂SiF₆ whereas dense particles were prepared at 30 and 50 wt% of K₂SiF₆. The morphology of the Si deposit was determined by the concentration of Si in the electrolyte which is related to the formation of crystal and growth of Si. The formation mechanism of the Si deposit was interpreted by using high resolution TEM as well as electrochemical properties.

Źródło:

Archives of Metallurgy and Materials; 2015, 60, 2B; 1491-1497
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 46.

Tytuł:

A Recommended Integrated Mechanism to Enhance OSH Management of Blue-Collar Foreign Workers in Taiwan

Autorzy:

Liao, H. C.
Cheng, S. F.
Wang, Y.
Lee, L. H.

Powiązania:

https://bibliotekanauki.pl/articles/90376.pdf

Data publikacji:

2014

Wydawca:

Centralny Instytut Ochrony Pracy

Tematy:

occupational safety and health
Labor Safety and Health Act
OSH training program
manpower agency
blue-collar foreign worker
bezpieczeństwo i higiena pracy
zdrowie
szkolenie BHP

Opis:

This study examines the roles and functions of businesses, labor-exporting countries’ representative offices in Taiwan, religious organizations, and manpower agencies in promoting occupational safety and health (OSH). It also offers advice to Taiwanese authorities on making policies and improvements regarding the oversight mechanism mandated by the Labor Safety and Health Act, giving them an idea of what to focus on when enforcing control over blue-collar foreign workers’ OSH conditions. This study also proposes that Taiwanese authorities may serve not only as an overseer/inspector of those hiring blue-collar foreign workers in Taiwan, but also expand their role to lay down policies regarding a variety of OSH teaching materials in the blue-collar foreign workers’ native languages (spoken or written), the qualifications of translators in blue-collar foreign workers’ OSH training programs, and regulations concerning the longer hours such training programs take.

Źródło:

International Journal of Occupational Safety and Ergonomics; 2014, 20, 4; 537-549
1080-3548

Pojawia się w:

International Journal of Occupational Safety and Ergonomics

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 47.

Tytuł:

A stepwise ISO-based TQM implementation approach using ISO 9001:2015

Autorzy:

Chen, C.-K.
Anchecta, K.
Lee, J. -D.
Dahlgaard, J. J.

Powiązania:

https://bibliotekanauki.pl/articles/407353.pdf

Data publikacji:

2016

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

Total Quality Management
TQM
ISO QMS
ISO 9000
ISO 9001:2015
international standard

Opis:

The lack of an implementation roadmap always deters enterprises from choosing Total Quality Management (TQM) as its major management approach. This paper proposes a stepwise ISO-based TQM implementation approach which is based on the notion of the new threedimensional overall business excellence framework developed by Dahlgaard et al. [1]. The proposed approach consists of nine steps comprising three categories: “TQM faith building”, “TQM tools and techniques learning”, and “system development”. The steps in each of the three categories are arranged to span across the proposed nine-step approach. The ISO 9001:2015 standard is used as a case study to demonstrate the proposed approach. The ideas and benefits of the proposed approach are further discussed in relation to this illustration.

Źródło:

Management and Production Engineering Review; 2016, 7, 4; 65-75
2080-8208
2082-1344

Pojawia się w:

Management and Production Engineering Review

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 48.

Tytuł:

Oxide Formation In Metal Injection Molding Of 316L Stainless Steel
Tworzenie tlenków podczas wtryskiwania proszku stali nierdzewnej 316L

Autorzy:

Jang, J. M.
Lee, W.
Ko, S.-H.
Han, C.
Choi, H.

Powiązania:

https://bibliotekanauki.pl/articles/351352.pdf

Data publikacji:

2015

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

powder injection molding
sintering
316L stainless steel
sintering atmosphere
micro parts
wtryskiwanie proszku
spiekanie
stal nierdzewna 316L
mikro-część

Opis:

The effects of sintering condition and powder size on the microstructure of MIMed parts were investigated using water-atomized 316L stainless steel powder. The 316L stainless steel feedstock was injected into micro mold with micro features of various shapes and dimensions. The green parts were debound and pre-sintered at 800°C in hydrogen atmosphere and then sintered at 1300°C and 1350°C in argon atmosphere of 5torr and 760torr, respectively. The oxide particles were formed and distributed homogeneously inside the sample except for the outermost region regardless of sintering condition and powder size. The width of layer without oxide particles are increased with decrease of sintering atmosphere pressure and powder size. The fine oxides act as the obstacle on grain growth and the high sintering temperature causes severe grain growth in micro features due to larger amount of heat gain than that in macro ones.

Źródło:

Archives of Metallurgy and Materials; 2015, 60, 2B; 1281-1285
1733-3490

Pojawia się w:

Archives of Metallurgy and Materials

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 49.

Tytuł:

Development of a large beam facility

Autorzy:

Oh, B.
In, S.
Lee, K.
Jeong, S.
Seo, C.
Chang, D.

Powiązania:

https://bibliotekanauki.pl/articles/147420.pdf

Data publikacji:

2006

Wydawca:

Instytut Chemii i Techniki Jądrowej

Tematy:

beam facility
high power ion beam
o neutral beam
beam line component
cryosorption pump

Opis:

A large beam facility for the application of high power ion beams has been developed at the Korea Atomic Energy Research Institute (KAERI). The primary usage of this facility is to develop an 8 MW neutral beam heating system for a tokamak, but other applications using a large beam would also be possible in the near future. The facility is composed of a bucket ion source (120 kV, 65 A), related beam line components including a large vacuum chamber (3 m x 4 m x 5 m), power supplies for the ion source, control and DAS (Data Acquisition System), beam diagnostics system, and a water circulation system (2 MW) for cooling of the beam line components. The maximum beam parameters at present are a beam energy of 87 kV and a beam current of 17.5 A with a beam size of 13 x 45 cm2. A maximum pulse length of 10 s could be achieved with a 1 MW beam power. The beam power with a hydrogen ion will be increased up to 7.5 MW during 5 s.

Źródło:

Nukleonika; 2006, 51, 1; 37-42
0029-5922
1508-5791

Pojawia się w:

Nukleonika

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce

Skocz do pozycji: 50.

Tytuł:

The effect of patterns on image-based modelling of texture-less objects

Autorzy:

Hafeez, J.
Jeon, H.-J.
Hamacher, A.
Kwon, S.-C.
Lee, S.-H.

Powiązania:

https://bibliotekanauki.pl/articles/221814.pdf

Data publikacji:

2018

Wydawca:

Polska Akademia Nauk. Czytelnia Czasopism PAN

Tematy:

structure-from-motion
feature detection
patterns analysis
3D reconstruction
surface comparison

Opis:

The task of generating fast and accurate three-dimensional (3D) models of objects or scenes through a sequence of non-calibrated images is an active field of research. The recent development in algorithm optimization has resulted in many automatic solutions that can provide an accurate 3D model from texture-full objects. Structure-from-motion (SfM) is an image-based method that uses discriminative point-based feature identifier, such as SIFT, to locate feature points in the images. This method faces difficulties when presented with the objects made of homogenous or texture-less surfaces. To reconstruct such surfaces a well-known technique is to apply an artificial variety by covering the surface with a random texture pattern prior to the image capturing process. In this work, we designed three series of image patterns which are tested based on the contrast and density ratio which increases from the first to the last pattern within the same series. The performance of the patterns is evaluated by reconstructing the surface of a texture-less object and comparing it with the true data. Using the best-found patterns from the experiments, a 3D model of a Moai statue is reconstructed. The experimental results demonstrate that the density and structure of a pattern highly affects the quality of the reconstruction.

Źródło:

Metrology and Measurement Systems; 2018, 25, 4; 755-767
0860-8229

Pojawia się w:

Metrology and Measurement Systems

Dostawca treści:

Biblioteka Nauki

/5

Artykuł

Zmień widok

• na półce