Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kowalska, M.E." wg kryterium: Autor


Tytuł:
A Miocene anastomosing river system in the area of Konin Lignite Mine, central Poland
Autorzy:
Widera, M.
Kowalska, E.
Fortuna, M.
Powiązania:
https://bibliotekanauki.pl/articles/191379.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Geologiczne
Tematy:
sedimentology
fluvial deposits
palaeochannel pattern
anastomosing river
sand-filled channels
Opis:
This sedimentological study of the Wielkopolska Member of the Miocene Poznań Formation in the Jóźwin IIB opencast lignite-mining field, central Poland, reveals a late mid-Miocene anastomosing fluvial system with ribbon-shaped channels filled mainly by sandy and muddy deposits. The fluvial system, extending across the eastern flank of the post-Mesozoic Kleczew Graben, was tributive in its eastern upper reaches, but was increasingly distributive and northwards deflected in its lower reaches near the graben axis. Lithofacies analysis of a representative palaeochannel indicates that the river discharge significantly fluctuated and that the channels were filled with mud-bearing stratified fine-grained sand by low-density tractional turbulent flow during the high and low water stages and with a massive mud or sandy mud by a high-density flow during the rising and falling stages. The spatial pattern of fluvial channels and deformation channel-fill sandbodies were controlled by the graben topography and the differential compaction of peat substrate, with possible influence of bedrock faults. The fluvial system is thought to have drained to an endorheic ‘terminal’ basin to the north, rather than into the hypothetical Baltic River and further westwards to the distant North Sea basin, as postulated by some previous authors. The present case study contributes to the known spectrum of anastomosing river systems as a sand- to mud-dominated end-member.
Źródło:
Annales Societatis Geologorum Poloniae; 2017, 87, 2; 157-168
0208-9068
Pojawia się w:
Annales Societatis Geologorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A new strontium and zinc doped bioglasses for tissue engineering
Autorzy:
Zagrajczuk, B.
Dziadek, M.
Menaszek, E.
Cholewa-Kowalska, K.
Łączka, M.
Powiązania:
https://bibliotekanauki.pl/articles/285629.pdf
Data publikacji:
2017
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
bioglasses
tissue engineering
strontium
zinc
Źródło:
Engineering of Biomaterials; 2017, 20, no. 143 spec. iss.; 51
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An anomaly of the reproductive organs in Trochulus hispidus (Linnaeus, 1758) (Gastropoda: Pulmonata: Hygromiidae)
Autorzy:
Prockow, M.
Kuznik-Kowalska, E.
Powiązania:
https://bibliotekanauki.pl/articles/83247.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Mikołaja Kopernika. Wydział Biologii i Ochrony Środowiska. Stowarzyszenie Malakologów Polskich
Tematy:
anomaly
reproductive organ
Trochulus hispidus
Gastropoda
Pulmonata
Hygromiidae
land snail
snail
Opis:
A specimen of Trochulus hispidus from Buchenbach, Germany, had its male and female parts of thereproductive system completely separated. The female part lacked auxiliary organs. The male part opened into the genital atrium, but the vas deferens was blind-ended in a way precluding sperm transfer.
Źródło:
Folia Malacologica; 2012, 20, 1
1506-7629
Pojawia się w:
Folia Malacologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza wybranych właściwości fizycznych i chemicznych kakaowych produktów w proszku o zmodyfikowanym składzie surowcowym
Analysis of some physical and chemical properties of cocoa powder products with modified raw material composition
Autorzy:
Kowalska, J.
Sewastianowicz, E.
Majewska, E.
Druzynska, B.
Ciecierska, M.
Derewiaka, D.
Powiązania:
https://bibliotekanauki.pl/articles/35747.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Opis:
Celem pracy była analiza wpływu składu surowcowego oraz procesu aglome-racji na wybrane właściwości fizyczne i chemiczne kakaowych produktów w proszku. Materiał badawczy stanowiły surowce w proszku: kakao, sacharoza, glukoza, mleko dla dzieci, ich mieszaniny oraz aglomeraty. Zakres badań obejmował analizę wybranych właściwości fizykochemicznych badanych próbek: zawartości wody, aktywności wody, barwy, sypkości, gęstości nasypowej, jak również zwilżalności. Stwierdzono, że zmiana podstawowego składu surowcowego mieszanin, jak również zastosowanie procesu obróbki technologicznej w znaczącym stopniu wpłynęło na zmianę właściwości fizycznych badanych próbek. Proces aglomeracji oddziaływał istotnie na zawartość i aktywność wody, barwę, sypkość (skracając czas wysypu) i gęstość nasypową. Natomiast modyfi-kacja składu surowcowego i aglomeracja nie polepszyły odtwarzalności większości badanych pró-bek, za wyjątkiem tych, w których składzie dominowała sacharoza i/lub glukoza. Analizy statystyczne w większości przeprowadzonych badań wykazały statystycznie istotny wpływ aglomeracji na badane właściwości, natomiast nie określono jednoznacznego wpływu modyfikacji składu su-rowcowego. W oparciu o uzyskane wyniki wskazano mieszaninę, w której sacharozę częściowo zastąpiono mlekiem, jako alternatywę dla produktów rynkowych.
The aim of the study was to analyse the impact of raw material composition and agglomeration process on selected physical and chemical properties of cocoa powder products. The experimental material consisted of powder materials: cocoa, sucrose, glucose, milk for children, their mixtures and agglomerates. The scope of study included the analysis of selected physicochemical properties of test samples: water content, water activity, colour, flowability, bulk density, and wettability. It was found that a change of the basic composition of the raw material mixture as well as the use of the processing had a significant effect on the physical properties of the samples tested. The agglomeration process significantly influenced the water content and activity, colour, flowability (re-ducing the discharge time) and bulk density. In contrast, modification of fibre composition and ag-glomeration did not improve the reproducibility of a majority of the samples tested, with the exception of those whose composition was dominated by sucrose and/or glucose. In most cases, the statistical analysis showed a statistically significant effect of agglomeration on the properties investigated, but did not demonstrate any clear influence of modification of fibre composition. Based on the results obtained, a mixture in which sucrose was partly replaced by milk was indicated as an alternative to commercial products.
Źródło:
Acta Agrophysica; 2015, 22, 2
1234-4125
Pojawia się w:
Acta Agrophysica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza wybranych właściwości kaw rozpuszczalnych otrzymywanych różnymi metodami
Analysis of selected properties of soluble coffees obtained by different methods
Autorzy:
Kowalska, J.
Majewska, E.
Drużyńska, B.
Ciecierska, M.
Derewiaka, D.
Pakieła, A.
Powiązania:
https://bibliotekanauki.pl/articles/270725.pdf
Data publikacji:
2013
Wydawca:
Centralny Ośrodek Badawczo-Rozwojowy Aparatury Badawczej i Dydaktycznej, COBRABiD
Tematy:
kawa rozpuszczalna
liofilizacja
aglomeracja
polifenole
instant coffee
freeze
agglomeration
poliphenols
Opis:
Celem pracy była analiza wybranych właściwości fizyko-chemicznych kaw rozpuszczalnych produkowanych różnymi metodami technologicznymi, dostępnych na polskim rynku. Przeprowadzono pomiar takich właściwości fizycznych jak: zawartość suchej masy, aktywność wody, barwa oraz zwilżalność. Badania właściwości chemicznych obejmowały oznaczenie zdolności przeciwutleniających ekstraktów kawowych poprzez oznaczenie zawartości polifenoli ogółem oraz zdolności do inaktywacji rodników DPPH+. Badane kawy rozpuszczalne posiadały bardzo dobre właściwości przeciwutleniające. Stwierdzono wpływ procesu otrzymywania kaw na ich właściwości fizyczne.
The aim of this study was to analyze selected physico-chemical properties of soluble coffee produced by various methods which are available on the Polish market. In the research part, physical properties, such as dry matter content, water activity, color and wettability, were measured. The chemical properties of the antioxidant capacity of coffee extracts were indicated by determining the total polyphenol content and the ability to inactivate the DPPH+ radicals. Analysis of the test results led to the conclusion that soluble coffee have a very good antioxidant properties. It was also found that production technology have a very strong influence on the physical properties of the products.
Źródło:
Aparatura Badawcza i Dydaktyczna; 2013, 18, 4; 277-284
2392-1765
Pojawia się w:
Aparatura Badawcza i Dydaktyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Authors’ response (July 6, 2017) to the letter to the Editor concerning the paper “Impact of road traffic noise on sleep disturbances and attention disorders amongst school children living in Upper Silesian Industrial Zone, Poland”
Autorzy:
Skrzypek, Michał
Kowalska, Małgorzata
Czech, Elżbieta M.
Niewiadomska, Ewa
Zejda, Jan E.
Powiązania:
https://bibliotekanauki.pl/articles/2162815.pdf
Data publikacji:
2017-10-18
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
sleep
child
noise
attention
transportation
automobiles
Źródło:
International Journal of Occupational Medicine and Environmental Health; 2018, 31, 1; 127-127
1232-1087
1896-494X
Pojawia się w:
International Journal of Occupational Medicine and Environmental Health
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie korelacji pomiędzy zawartością polifenoli ogółem a zdolnością do dezaktywacji rodników DPPH w wybranych miodach pszczelich
The study of correlation between total poliphenol content and the capacity to deactivate the DPPH radicals in selected honeys
Autorzy:
Majewska, E.
Kowalska, J.
Drużyńska, B.
Derewiaka, D.
Ciecierska, M.
Powiązania:
https://bibliotekanauki.pl/articles/271185.pdf
Data publikacji:
2014
Wydawca:
Centralny Ośrodek Badawczo-Rozwojowy Aparatury Badawczej i Dydaktycznej, COBRABiD
Tematy:
miód pszczeli
polifenole
DPPH
korelacja
honey
poliphenols
correlation
Opis:
Celem pracy było wyznaczenie współzależności między zawartością polifenoli ogółem i zdolnością do dezaktywacji rodników DPPH wybranych miodów pszczelich. Materiał badawczy stanowiły 43 próbki nektarowych miodów pszczelich 12 różnych rodzajów, wśród których było 7 rodzajów miodów powszechnie spożywanych (wielokwiatowy, gryczany, akacjowy lipowy wrzosowy, nektarowo-spadziowy oraz rzepakowy) oraz 5 rodzajów miodów „niszowych”. Wyniki badań pozwoliły stwierdzić, że istnieje silna dodatnia korelacja pomiędzy zawartością polifenoli ogółem a zdolnością do dezaktywacji rodników DPPH, o czym świadczy wysoki współczynnik korelacji r = 0,976.
The aim of this study was to determine the relationship between total polyphenol content and the ability to deactivate the DPPH radicals selected honeys. The material consisted of 43 samples of honey nectar 12 different types, of which there were seven types of commonly consumed honey (multi-flower, buckwheat, acacia, lime, heather, honeydew and rape) and five types of honey “niche”. The results allow for the conclusion that there is a strong positive correlation between total polyphenol content and the ability to deactivate the DPPH radicals as evidenced by the high correlation coefficient r = 0.976.
Źródło:
Aparatura Badawcza i Dydaktyczna; 2014, 19, 2; 127-133
2392-1765
Pojawia się w:
Aparatura Badawcza i Dydaktyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bioactivity of PLGA-gel-derived bioglass composites
Autorzy:
Łączka, M.
Maślanka, E.
Pawlik, J.
Dziadek, M.
Zagrajczuk, B.
Cholewa-Kowalska, K.
Powiązania:
https://bibliotekanauki.pl/articles/93122.pdf
Data publikacji:
2018
Wydawca:
Państwowa Wyższa Szkoła Zawodowa w Tarnowie
Tematy:
polymer-ceramic composite
bioactive property
kompozyt polimerowo-ceramiczny
właściwość bioaktywna
Opis:
A series of PLGA (poly L-lactide-co-glycolide) based composites modified with gel-derived glasses in the form of foils were obtained by solvent casting procedure. As a modifier, glass particles with different chemical compositions from the CaO–SiO2, CaO–P2O5–SiO2,and Al2O3–SiO2 systems were used. All glasses were synthesized by the sol-gel process. Evaluation of bioactive properties of obtained composites was made on the basis of surface changes occurring during contact with simulated body fluid. The changes of Ca, P and Si ions concentration in SBF after incubation of composites were also measured. The result showed that all composites with bioglasses (CaO–SiO2, CaO–P2O5–SiO2) exhibit formation of calcium phosphates layer after SBF test, however, kinetics of Ca, Si ion release and P uptake from SBF was dependent on bioglass chemical composition. The higher solubility, as well as faster consumption of phosphorus from SBF, was observed for materials from CaO–SiO2 (T1/PLGA, S1/PLGA) compared to composites with respective bioglass particles from the CaO–P2O5–SiO2(T2/PLGA, S2/PLGA). Our results showed that rate of Si and Ca release from the gel-derived glasses and P uptake from SBF are dependent on both: the concentration of respective ions in the materials and the presence of phosphates in their structure. For materials modified with gel-derived glasses from Al2O3–SiO2 system no significant surface changes during contact with SBF were observed, and it seems that their behavior in physiological solution indicate that they are bio-inert materials.
Źródło:
Science, Technology and Innovation; 2018, 3, 2; 27-34
2544-9125
Pojawia się w:
Science, Technology and Innovation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of the essential oil from cone-berries of Juniperus communis L. (Cupressaceae)
Charakterystyka olejku eterycznego uzyskiwanego z szyszkojagód jałowca pospolitego Juniperus communis L. (Cupressaceae)
Autorzy:
Majewska, E.
Kozłowska, M.
Kowalska, D.
Gruczynska, E.
Powiązania:
https://bibliotekanauki.pl/articles/72358.pdf
Data publikacji:
2017
Wydawca:
Instytut Włókien Naturalnych i Roślin Zielarskich
Tematy:
essential oil
Juniperus communis
Cupressaceae
folk medicine
Opis:
Juniperus communis L. (Cupressaceae) is a plant widely cultivated in the Northern hemisphere. Juniper berries, the fruit of Juniperus communis L. are a highly valued, essential oil-rich plant material used traditionally in folk medicine as antiseptic, diuretic, antirheumatic, anti-inflammatory, antibacterial and antifungicidal agent. This paper reviews information on extraction methods of the essential oil from the juniper berries, its chemical composition and antimicrobial as well as antioxidant properties.
Jałowiec pospolity Juniperus communis L. (Cupressaceae) jest rośliną powszechnie występującą na całej półkuli północnej. Szyszkojagoda jałowca jest surowcem roślinnym dostarczającym cennego olejku eterycznego wykorzystywanego głównie w lecznictwie jako środek o właściwościach bakteriobójczych, moczopędnych, przeciwzapalnych, przeciwreumatycznych oraz przeciwgrzybiczych. W pracy przedstawiono charakterystykę olejku eterycznego uzyskiwanego z szyszkojagód jałowca pospolitego, metody jego ekstrakcji, skład chemiczny oraz właściwości przeciwbakteryjne i przeciwgrzybicze, jak również przeciwutleniające.
Źródło:
Herba Polonica; 2017, 63, 3
0018-0599
Pojawia się w:
Herba Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka wybranej żywności o obniżonej kaloryczności
Characteristic of energy-reduced functional foods
Autorzy:
Derewiaka, D.
Sobiecka, A.
Ciecierska, M.
Drużyńska, B.
Majewska, E.
Kowalska, J.
Powiązania:
https://bibliotekanauki.pl/articles/228113.pdf
Data publikacji:
2013
Wydawca:
Wyższa Szkoła Menedżerska w Warszawie
Tematy:
żywność
obniżona kaloryczność
cukier
tłuszcz
food
reduced calorific
sugar
fat
Opis:
Zgodnie z Rozporządzeniem (WE) Nr 1924/2006 określenie „o obniżonej zawartości”, również kaloryczności, może być stosowane w stosunku do produktów, w których obniżenie zawartości danego składnika wyniosło co najmniej 30% w porównaniu z podobnym produktem. W 78 spośród 150 badanych produktów obniżono zawartość tłuszczu i/lub zastosowano jego zamienniki, natomiast w 54 produktach obniżono zawartość cukru i/lub zastosowano środki słodzące. Spośród wszystkich produktów 1/4 posiadała na opakowaniu oświadczenie o obniżonej kaloryczności i faktycznie spełniała jego warunki.
Introduction: In accordance with Regulation EC No 1924/2006 the term „low in” including calories, it can be applied to products in which the decrease of the component was at least 30% compared to a similar product. In 78 products fat content was reduced and/or it replacement have been used, while in the 54 products, the energy-reduction was achieved by reducing sugar content and/or sweeteners were used. ¼ of all the products held on the package declaration about energy-reduction and actually meet the declaration conditions.
Źródło:
Postępy Techniki Przetwórstwa Spożywczego; 2013, 2; 70-74
0867-793X
2719-3691
Pojawia się w:
Postępy Techniki Przetwórstwa Spożywczego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka wybranych majonezow oraz wplyw temperatury i czasu przechowywania na ich stabilnosc
Autorzy:
Gruczynska, E
Kowalski, B.
Kowalska, M.
Smiechowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/827013.pdf
Data publikacji:
2006
Wydawca:
Polskie Towarzystwo Technologów Żywności
Tematy:
temperatura
monoglicerole
przechowywanie
diglicerole
emulsje spozywcze
majonezy
kwasy tluszczowe
stabilnosc
olej rzepakowy
destabilizacja
triacyloglicerole
Źródło:
Żywność Nauka Technologia Jakość; 2006, 13, 4; 154-166
1425-6959
Pojawia się w:
Żywność Nauka Technologia Jakość
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Chemia analityczna w badaniu i ochronie środowiska
Analytical chemistry in investigation and protection of the environment
Autorzy:
Krasnodębska-Ostręga, B.
Kowalska, J.
Kińska, K.
Sadowska, M.
Biaduń, E.
Powiązania:
https://bibliotekanauki.pl/articles/172128.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Chemiczne
Tematy:
woltamperometria
analiza specjacyjna
frakcjonowanie
fitoremediacja
fitochelatyny
voltammetric method
speciacion analysis
fractionation
phytoremediation
phytochelatins
Opis:
The main goal of studies carried in our reasearch group – analytical chemistry in investigation and protection of the environment is the evaluation of the impact of human activity on environmental pollution, and creation of analytical procedures that can be applied in environmental analysis. Detailed description of our research can be found on webpage http://www.chem.uw.edu.pl/labs/pcas. In this paper we would like to present only a few topics and analytical challenges that we were dealing with during the last years. The application of anodic and cathodic stripping voltammetry for trace analysis of hazardous metals (cadmium, lead, thallium, platinum, rhodium) in natural samples is described [4–6]. Voltammetry is also presented as a tool used in speciation analysis, which is particularly important in the case of elements which toxicity and assimilation depends on chemical form of the element that is present in the environment (e.g. As) [8]. Attention is also paid to fractionation, which is a specific case of speciation analysis, extremely important for evaluation of mobility and bioavailability of harmful or nutritious substances from soil. As environmental monitoring often requires carrying measurements at trace levels, it might be necessary to preconcentrate the analytes or simplify the composition of the sample before the analysis. For such purposes solid phase extraction (SPE) is widely used and frequently applied. Another analytical task presented in this work is recognition of the defense mechanisms developed by hyperaccumulating plants, e.g. white mustard. This species was investigated for synthesis of phytochelatins – sulphur-rich polipeptides induced by high concentrations of As, Tl, Cd, Pt, Pd and Rh [14]. It is worth noting that plant species that are able to cumulate high amounts of xenobiotics can be used for phytoremediation, which is one of so called “green technologies”, used for restitution of polluted environment, particularly soil [19].
Źródło:
Wiadomości Chemiczne; 2015, 69, 9-10; 735-749
0043-5104
2300-0295
Pojawia się w:
Wiadomości Chemiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Chloropropanole, chloropropanodiole i ich estry w żywności
Chloropropanols, chloropropandiols and their esters in food - formation, occurrence, determination, reduction of content
Autorzy:
Kowalska, D.
Gruczynska, E.
Kowalska, M.
Kozlowska, M.
Kowalski, B.
Powiązania:
https://bibliotekanauki.pl/articles/826437.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Technologów Żywności
Opis:
Związki: 3-monochloropropano-1,2-diol (3-MCPD), 2-monochloropropano-1,3-diol (2-MCPD), 1,3- i 2,3-dichloropropanole (1,3-DCP i 2,3-DCP) oraz ich estry należą do grupy tzw. zanieczyszczeń procesowych żywności. 3-MCPD wykryto jako pierwszy, w 1978 roku w produktach kwasowej hydrolizy białek roślinnych, a jego estry zidentyfikowano w 1980 r. W 2006 roku stwierdzono obecność dużych ilości estrów 3-MCPD w rafinowanych olejach roślinnych. Od ponad 35 lat prowadzone są badania nad mechanizmami powstawania wymienionych związków w żywności bogatej w tłuszcz, ogrzewanej do wysokiej temperatury. Do produktów narażonych na zanieczyszczenie związkami 3-MCPD i jego estrami w trakcie procesu technologicznego należą m.in. oleje rafinowane, frytki, chipsy, pieczywo, produkty wędzone. W pracy przedstawiono stan badań dotyczący powstawania 3-MCPD i jego estrów, występowania w żywności, aspektów analitycznych i toksykologicznych oraz uregulowań prawnych. Opisano także sposoby redukcji zawartości 3-MCPD i jego estrów w żywności.
3-MCPD, 2-MCPD, 1,2- and 2,3-DCP and their esters belong to the group of well known process-induced contaminants. The 3-MCPD was first identified in 1978 in acid-hydrolyzed vegetable proteins and its corresponding esters in 1980. Since their discovery more than 35 years later the exact mechanisms of their formation in foods is still studied. 3-MCPD and its esters occur in fat rich food that was thermally processed. In 2006 the huge quantities of 3-MCPD esters were detected in refined vegetable oils. The presented paper contains information on 3-MCPD and its esters formation, occurrence in foods, and on analytical and toxicological aspects. The strategies for the reduction of content of 3-MCPD and 3-MCPD-esters in foods are also briefly discussed.
Źródło:
Żywność Nauka Technologia Jakość; 2015, 22, 4
1425-6959
Pojawia się w:
Żywność Nauka Technologia Jakość
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative study of hydroxyapatite and hydroxyapatite mixed with bioglass coatings of metallic implants, deposited by PLD method
Autorzy:
Mróz, W.
Jedyński, M.
Burdyńska, S.
Prokopiuk, A.
Ślósarczyk, A.
Menaszek, E.
Ścisłowska-Czarnecka, A.
Łączka, M.
Cholewa-Kowalska, K.
Niedzielska, A.
Powiązania:
https://bibliotekanauki.pl/articles/286137.pdf
Data publikacji:
2008
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:
implants
hydroxyapatite
bioglasses
Opis:
Hydroxyapatite and bioglasses are important bioactive materials as they exhibit direct bonding with human bone. Therefore they are used as coatings for metallic implants. The aim of the present study was to compare two types of layers: monophase hydroxyapatite (HA) and composite-type HA+BG hydroxyapatite mixed with bioglass (BG) (BG 50% of weight) during the initial stage of their interaction with cell medium. In vitro studies were performed in order to determine the effect of the investigated layers on cell response. After 3 and 7 days the behaviour of the cells grown on the above surfaces was estimated through determination of the cell adhesion (CV colorimetric assay). Cell morphology and properties of biomaterials surfaces were analysed by atomic force microscopy (AFM).
Źródło:
Engineering of Biomaterials; 2008, 11, no. 81-84; 121-123
1429-7248
Pojawia się w:
Engineering of Biomaterials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of point clouds captured with terrestrial laser scanners with different technical characteristic
Autorzy:
Zaczek-Peplinska, J.
Kowalska, M. E.
Powiązania:
https://bibliotekanauki.pl/articles/115439.pdf
Data publikacji:
2014
Wydawca:
Fundacja na Rzecz Młodych Naukowców
Tematy:
terrestrial laser scanning
fitting plane
least square method
naziemne skanery laserowe
płaszczyzny montażu
metoda najmniejszych kwadratów
Opis:
Terrestrial Laser Scanners come with different technical parameters like the wavelength (laser colour), range or even the distance measuring method. Within this work the surface of a large-scale concrete – Rożnów Dam -structure was captured by three different Terrestrial Laser Scanners with different technical parameters - Leica C10, Riegl VZ -400 and the Z+F Imager 5010. The captured three dimensional point clouds were further evaluated by analysing the parameters of a fitted plane in each case that has been derived with the help of a least squares adjustment. This paper describes different analysis of registered point clouds. Presented results indicate significant differences between representations of scanned surface, measured in the same weather conditions, using three different scanner models. Analysis revealed differences in “grain” and texture of obtained visualization, as well as registered data completeness. These differences might play a significant role during conducting analysis of an engineering object changes and deformations based on point clouds registered in different time periods.
Źródło:
Challenges of Modern Technology; 2014, 5, 4; 39-43
2082-2863
2353-4419
Pojawia się w:
Challenges of Modern Technology
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies