Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

English (EN)·Polski (PL)·Yкраїнський (UK)
Przejdź do strony domowej biblioteki Centralna Biblioteka Wojskowa Link otwiera się w nowym oknie Logo biblioteki Prolib Integro - strona głównaCentralna Biblioteka Wojskowa

Wyszukujesz frazę "Kim, J.-G." wg kryterium: Autor

  Lista filtrów
Wyrównaj
Wyświetlanie 1-25 z 32
Tytuł:
Purification And Separation Of Rare Earth Elements From CCFL With Extraction Chromatography
Oczyszczanie i separacja metali ziem rzadkich z lamp fluorescencyjnych z zimną katodą (CCFL) przy użyciu chromatografii ekstrakcji
Autorzy:
Kim, J. G.
Powiązania:
https://bibliotekanauki.pl/articles/352470.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
extraction chromatography
CCFL
rare earth elements (REE)
amberite
recycling
chromatografia ekstrakcyjna
pierwiastki ziem rzadkich
recykling
Opis:
In this study, Amberite XAD-7HP was used as the solvent-impregnated resin to separate each REE from the standard solution, which was mixed with the REEs (e.g., La Eu, Tb, Y and Ba). About 100 ppm of each of the REEs was separated from DI water using extraction chromatography. REEs were separated by extraction chromatography using Amberite XAD-7HP resin, the changes in the pH values of the HCl and HClO4 were between 0.2 N and 5 N, and the extraction rate of the solution was between 0.5 and 3 ml/min. The La solution with the separated REEs was leached. The solid-state REEs were annealed between 1083K. The extraction result was analyzed with ICP-AES and an X-ray diffractometer. Each REE was successfully separated with HCl and HClO4 with pH values between 0.1 N and 3 N and with extraction rate between 1.0 m/min and 3.0 m/min.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1529-1533
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Magnetic Properties of (Nia-Znb)X Cu1-X Ferrite Nanoparticle Fabricated by Sol-Gel Process
Autorzy:
Yang, S.
Kim, J.-G.
Powiązania:
https://bibliotekanauki.pl/articles/352091.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ni-Zn-Cu ferrite
nanoparticle
soft magnetic property
sol-gel
Opis:
In future, more mobile devices with different frequencies will be used at the same time. Therefore, it is expected that the trouble caused by wave interference between devices will be further intensified. In order to prevent this trouble, investigation of selective frequency transmission or absorption material is required. In this paper, magnetic properties of nickel-zinc-copper ferrite nano powder was researched as wave absorber. (Nia-Znb)xCu1-xFe2O4(NZCF) nanoparticles were fabricated by the sol-gel method. The influence of copper substitution on lattice parameter change was analyzed by X-ray diffraction (XRD), particle size was analyzed by scanning electron microscopy (SEM), and Magnetic properties analyzed by vibrating sample magnetometer (VSM). The NZCF and Nickel-zinc ferrite (NZF) lattice parameter difference was 0.028 Å and particle size was calculated as 30 nm with the XRD peak. The VSM results of (Ni0.3-Zn0.3)0.6Cu1-0.6Fe2O4 annealed sample at 700°C for 3hous were 58.5 emu/g (Ms), 22.8 Oe (Hc). It was the most suitable magnetic properties for wave absorber in this investigation.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1197-1200
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study On The Separation And Extraction Of Rare-Earth Elements From The Phosphor Recovered From End Of Life Fluorescent Lamps
Badanie separacji i ekstrakcji metali ziem rzadkich z fosforu ze zużytych świetlówek
Autorzy:
Shin, D.-W.
Kim, J. G.
Powiązania:
https://bibliotekanauki.pl/articles/351714.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
recycle
yttrium
phosphor
end of life
recykling
itr
fosfor
świetlówki
Opis:
In this study, recovered phosphor from end of life three-wavelength fluorescent lamp was selected for reuse rare earth elements in the phosphor. The effect of a type of acid, concentration, and time was investigated as solubility of rare earth elements. In addition, precipitate heat-treated was investigated as possibility of reusable phosphor. The results showed that the amount of the rare earth elements was different values depending on the type of acid, and it was investigated with concentration of acid and reaction time. After precipitation reaction, the precipitate was sintered in electric furnace in order to reuse rare earth elements as phosphor. It was confirmed that yttrium, europium, oxygen, and carbon through X-ray diffraction and inductively coupled plasma analysis. Following the results, it can assume that rare earth oxide reuse the phosphor as three-wavelength fluorescent lamp.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1257-1260
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on Crystal Structure and Magnetic Properties of Ba4Co2Fe36O60 by Sol-Gel Method
Autorzy:
Jeong, K.-P.
Yang, S.-W.
Kim, J.-G.
Powiązania:
https://bibliotekanauki.pl/articles/351655.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
U-type ferrite
sol-gel method
nano-powder
Opis:
U-type ferrite typified by Ba4Co2Fe36O60 is used as a RAM (Radar Absorbing Materials) in the X-band (8-12 GHz). Ba4Co2Fe36O60 is known to have a complex crystal structure, which makes it difficult to obtain single phase and have low reproducibility. Previously known U-type ferrites have been fabricated based on a ceramic process that mixing (by a ball mill), calcining, grinding, binder mixing, drying, sieving, pressing and sintering. In contrast, the process of preparing the powder by the sol-gel method and its heat-treating is advantageous in that it can reduce the process steps and the required time. In addition, the precise stoichiometric control by the sol-gel method can effectively evaluate the effect of added or substituted elements. In this study investigates the crystal structure of Ba4Co2Fe36O60 synthesized by the sol-gel method and the morphology of U-type ferrite nano-powders according to various heat treatment conditions. Analysis of the crystal structure is used for XRD. Morphology and size are observed by SEM. In addition, VSM is performed to confirm the change of magnetic properties according to various heat treatment conditions.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1449-1452
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Substituted Elements on Reflection Loss of Ba-Ferrite Nanoparticle
Autorzy:
Yang, S.
Jeong, K.-P.
Park, S.-Y.
Kim, J.-G.
Powiązania:
https://bibliotekanauki.pl/articles/352041.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ba ferrite
substitutional m-type ferrite
reflection loss
sol-gel
additional atom
Opis:
Due to the rapid development of the information communication industries, it is expected that next-generation mobile communication devices in the data communication environment will be used at the same time in the L~X band (1–12 GHz). To mutual electric wave interference prevention, research on wave absorbers in L~X band is needed. In this paper, barium ferrite was researched as L~X band wave absorber. The Barium ferrite (BaM, Ba ferrite) substituted by divalent ions (Co2+, Cu2+, Ni2+, Zn2+) and tetravalent ion (Ti4+). The substituted Ba ferrite nanoparticles were fabricated by sol-gel process. Lattice parameter, particle size, magnetic properties, and reflection loss were analyzed by X-ray diffraction (X-RD), a Vibrating Sample Magnetometer (VSM), and a Network Analyzer. Lattice parameter of Ba ferrite was changed 0.0005 to 0.0078 Å in a-b direction, and 0.0187 to0.0445 Å in c-direction by substituted elements, and it influenced on magnetic anisotropy. In addition, Co-Ti substitution elements influenced that coercive force decrease 5,739 to 2,240 Oe. Moreover, reflection loss frequencies were shifted from 16.3 GHz to 14.4 and 17.4 GHz by substituted elements Co-Ti and Zn-Ti.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1201-1204
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hardness and Microstructure of Mixed Al-CNF Powder Extrusion
Autorzy:
Kim, D.-H.
Kim, T.-J.
Lim, S.-G.
Powiązania:
https://bibliotekanauki.pl/articles/351170.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Al-CNF composite
cold isotatic
presses
powder extrusion
LED
microstructure
Opis:
In this study, mechanical properties and microstructures of extruded aluminum matrix composites were investigated. The composite materials were manufactured by two step methods: powder metallurgy (mixture of aluminum powder and carbon fiber using a turbular mixer, pressing of mixed aluminum powder and carbon fiber using a cold isostatic pressing) and hot extrusion of pressed aluminum powder and carbon fiber. For the mixing of Al powder and carbon fibers, aluminum powder was used as a powder with an average particle size of 30 micrometer and the addition of the carbon fibers was 50% of volume. In order to make mixing easier, it was mixed under an optimal condition of turbular mixer with a rotational speed of 60 rpm and time of 1800s. The process of the hot-extrusion was heated at 450°C for 1 hour. Then, it was hot-extruded with a condition of extrusion ratio of 19 and ram speed of 2 mm/s. The microstructural analysis of extruded aluminum matrix composites bars and semi-solid casted alloys were carried out with the optical microscope, scanning electron microscope and X-ray diffraction. Its mechanical properties were evaluated by Vickers hardness and tensile test.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1267-1270
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optical Properties of Multi-Stacked InAs Quantum Dots Embedded in GaAs/InGaAs Strained Layer and its Annealing Behaviors
Autorzy:
Kim, D.
Kim, G.
Jeon, S.
Cho, M.
Choi, H.
Kim, M.
Lee, D.
Kim, J.
Eom, G.
Leem, J.
Powiązania:
https://bibliotekanauki.pl/articles/1537752.pdf
Data publikacji:
2010-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.67.Hc
78.55.Cr
81.05.Ea
Opis:
Multi-stacked InAs QDs embedded in ten periods of GaAs/$In_{0.1}Ga_{0.9}As$ strained layers were grown by MBE and their optical properties were investigated by using PL spectroscopy. For the QDs embedded in ten periods of GaAs/$In_{0.1}Ga_{0.9}As$ strained layers, the PL intensity is enhanced about 4.7 times and a narrower FWHM of 26 meV is observed compared to those of the conventional multi-stacked QDs. The PL spectra of the InAs QDs show blue-shifts of about 50 meV with increasing annealing temperature up to 850°C. At annealing temperature of 600°C, the FWHM of the PL peak is reduced to 16 meV and PL intensity is enhanced compared to those of the as-grown sample, which indicates improvement of size uniformity and crystal quality of the QDs.
Źródło:
Acta Physica Polonica A; 2010, 117, 6; 941-944
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Building of CBR’s DB Using Ontology for a Collision Avoidance System
Autorzy:
Park, G. K.
Kim, W. G.
Benedictos, J.
Powiązania:
https://bibliotekanauki.pl/articles/117348.pdf
Data publikacji:
2008
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
anticollision
ontology
Collision Avoidance System
Case Based Reasoning (CBR)
Fuzzy CBR Technique
CBR Data Base
Manoeuvring Situations
Risk of Collision
Opis:
We have proposed Fuzzy-CBR to find a solution from past knowledge retrieved from the database and adapted to the new situation. However, ontology is needed in identifying concepts, relations and instances that are involved in a situation in order to improve and facilitate the efficient retrieval of similar cases from the CBR database. This paper proposes the way to apply ontology for identifying the concepts involved in a new case, used as inputs, for ship collision avoidance support system and in solving for similarity through document articulation and abstraction levels. These ontologies will be used to build a conceptual model of a manoeuvring situation.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2008, 2, 4; 369-374
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of InAs Coverage on Transition of Size Distribution and Optical Properties of InAs Quantum Dots
Autorzy:
Kim, G.
Jeon, S.
Cho, M.
Choi, H.
Kim, D.
Kim, M.
Kwon, Y.
Choe, J.
Kim, J.
Leem, J.
Powiązania:
https://bibliotekanauki.pl/articles/1535820.pdf
Data publikacji:
2010-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.15.Hi
68.37.Ps
78.55.Cr
78.67.Hc
Opis:
The influence of InAs coverage on the formation of self-assembled quantum dots grown by molecular-beam epitaxy was investigated by atomic force microscopy and photoluminescence measurements. As the InAs coverage increased from 2.0 to 3.0 monolayers, the quantum dot density decreased from 1.1 × $10^{11}$ to 1.36 × $10^{10} cm^{-2}$. This result could be attributed to the coalescence of neighboring small InAs quantum dots resulting in the formation of much larger InAs quantum dots with lower quantum dot density. Atomic force microscopy results revealed that as the InAs quantum dot coverage increased, the transition of size distribution of InAs quantum dots from single-modal to multimodal occurred. The temperature-dependent photoluminescence spectra showed that the photoluminescence spectra red shifted and the photoluminescence peak intensity decreased as the InAs coverage increased. The thermal activation energy was strongly dependent on the InAs coverage, and for InAs quantum dots with 3.0 ML thick InAs coverage, this energy was estimated to be 147 meV.
Źródło:
Acta Physica Polonica A; 2010, 118, 4; 673-676
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Extraction Factor Of Pure Ammonium Paratungstate From Tungsten Scraps
Współczynnik ekstrakcji czystego parawolframianu amonu z odpadów wolframowych
Autorzy:
Pee, J-H.
Kim, G. H.
Lee, H. Y.
Kim, Y. J.
Powiązania:
https://bibliotekanauki.pl/articles/356567.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
raw material
recycling
ammonium paratungstate
tungsten scraps
extraction
surowce
recykling
parawolfrawian amonu
odpady wolframowe
ekstrakcja
Opis:
Typical oxidation process of tungsten scraps was modified by the rotary kiln with oxygen burner to increase the oxidation rate of tungsten scraps. Also to accelerate the solubility of solid oxidized products, the hydrothermal reflux method was adapted. By heating tungsten scraps in rotary kiln with oxygen burner at around 900° for 2hrs, the scraps was oxidized completely. Then oxidized products (WO3 and CoWO4) was fully dissolved in the solution of NaOH by hydrothermal reflux method at 150° for 2hrs. The dissolution rate of oxidized products was increased with increasing the reaction temperature and concentration of NaOH. And then CaWO4 and H2WO4 could be generated from the aqueous sodium tungstate solution. Ammonium paratungstate (APT) also could be produced from tungstic acid using by aqueous ammonium solution. The morphologies (cubic and plate types) of APT was controlled by the stirring process of purified solution of ammonium paratungstate.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1403-1405
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Growth and Characterization of Indium-Doped Zinc Oxide Thin Films Prepared by Sol-Gel Method
Autorzy:
Kim, M.
Yim, K.
Kim, S.
Nam, G.
Lee, D.
Kim, Jin
Kim, Jong
Leem, J.
Powiązania:
https://bibliotekanauki.pl/articles/1491351.pdf
Data publikacji:
2012-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.05.Dz
81.20.Fw
78.66.Hf
Opis:
Indium-doped ZnO thin films were deposited by sol-gel spin-coating method with various In content. The effects of In content on the structural and optical properties of the indium-doped ZnO thin films were investigated by scanning electron microscopy, X-ray diffraction, and UV-visible spectroscopy. The particle-like surface morphology and the crystallinity of the indium-doped ZnO thin films were affected by change in the In content, especially at the In content of 3 at.%. The values of direct band gap were decreased with increase in the In content. The width of localized states in the optical band gap of the indium-doped ZnO thin films were changed with In content and the Urbach energy $(E_{U})$ was changed inversely with optical band gap of the indium-doped ZnO thin films.
Źródło:
Acta Physica Polonica A; 2012, 121, 1; 217-220
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Extraction Factor Of Tungsten Sources From Tungsten Scraps By Zinc Decomposition Process
Współczynnik ekstrakcji związków wolframu z odpadów wolframowych w procesie rozkładu cynku
Autorzy:
Pee, J-H.
Kim, G. H.
Lee, H. Y.
Kim, Y. J.
Powiązania:
https://bibliotekanauki.pl/articles/354774.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
raw material
recycling
zinc decomposition process
tungsten carbide
tungstic acid
surowce
recykling
proces rozkładu cynku
węglik wolframu
kwas wolframowy
Opis:
Decomposition promoting factors and extraction process of tungsten carbide and tungstic acid powders in the zinc decomposition process of tungsten scraps which are composed mostly of tungsten carbide and cobalt were evaluated. Zinc volatility was suppressed by the enclosed graphite crucible and zinc volatilization pressure was produced in the reaction graphite crucible inside an electric furnace for ZDP (Zinc Decomposition Process). Decomposition reaction was done for 2hours at 650°, which 100% decomposed the tungsten scraps that were over 30 mm thick. Decomposed scraps were pulverized under 75μm and were composed of tungsten carbide and cobalt identified by the XRD (X-ray Diffraction). To produce the WC(Tungsten Carbide) powder directly from decomposed scraps, pulverized powders were reacted with hydrochloric acid to remove the cobalt binder. Also to produce the tungstic acid, pulverized powders were reacted with aqua regia to remove the cobalt binder and oxidize the tungsten carbide. Tungsten carbide and tungstic acid powders were identified by XRD and chemical composition analysis.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1311-1314
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and Characterization of GaN/Polymer Composite p-n Junction with PEDOT Nanoparticle Interface Layer
Autorzy:
Kim, M.
Jin, S.
Choi, H.
Kim, G.
Yim, K.
Kim, S.
Nam, G.
Yoon, H.
Kim, Y.
Lee, D.
Kim, Jin
Kim, Jong
Leem, J.
Powiązania:
https://bibliotekanauki.pl/articles/1505152.pdf
Data publikacji:
2011-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
73.61.Ey
81.15.Gh
Opis:
A heavily Si-doped GaN/polymer hybrid structure with p-type poly(3,4-ethylene-dioxythiophene):beta-1,3-glucan (PEDOT nanoparticle) interface layer has been fabricated. The Si-doped GaN thin film with carrier concentration of 1 × $10^{19} cm^{-3}$ was grown by metal-organic chemical vapor deposition. The PEDOT nanoparticle with various sizes ranging from 60 to 120 nm was synthesized via a miniemulsion polymerization process. The electrical conductivity of the PEDOT nanoparticle is less than 1.2 S/cm. The current-voltage (I-V) characteristic of the hybrid structure shows diode-like behavior. The I-V characteristic was examined in the framework of the thermionic emission model. The ideality factor of the structure without PEDOT nanoparticle interface layer is 12.9. However, the ideality factor of the hybrid structure with PEDOT nanoparticle interface layer is obtained as 1.9. The value of ideality factor is dramatically decreased by inserting the PEDOT nanoparticle interface layer.
Źródło:
Acta Physica Polonica A; 2011, 119, 6; 875-879
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
ZnO Nanorods on Nanofibrous ZnO Seed Layers by Hydrothermal Method and Their Annealing Effects
Autorzy:
Yim, K.
Jeon, S.
Kim, M.
Kim, S.
Nam, G.
Lee, D.
Kim, Jin
Kim, Jong
Leem, J.
Powiązania:
https://bibliotekanauki.pl/articles/1491348.pdf
Data publikacji:
2012-01
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
81.05.Dz
81.15.Lm
78.55.Et
Opis:
ZnO nanorods were grown by using the hydrothermal method on p-type Si (100) substrates with nanofibrous ZnO seed layers. Before the ZnO nanorods growth, nanofibrous ZnO seed layers were spin-coated onto the Si substrates. The structural and optical properties of ZnO nanorods were characterized by scanning electron microscopy, X-ray diffraction, and photoluminescence. The fibrous ZnO nanorods is possible due to the surface morphology of the nanofibrous ZnO seed layers. To investigate annealing effects of the ZnO nanorods, the post-annealing process was carried out at various temperatures ranging from 300 to 700C under argon conditions. The structural and optical properties of the ZnO nanorods were also affected by the post-annealing treatment.
Źródło:
Acta Physica Polonica A; 2012, 121, 1; 214-216
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of acute lipopolysaccharide-induced toxemia model on some neglected blood parameters
Autorzy:
Adam, G.O.
Lee, H.R.
Lee, S.J.
Kim, S.J.
Kim, G.B.
Kang, H.S.
Powiązania:
https://bibliotekanauki.pl/articles/2087627.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Toxemia
lipopolysaccharide
base excess
pH
animal model
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 4; 665-671
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preparation of Nickel Powders by Reduction of Nickel Hydroxide Using the Taylor Fluid Flow
Autorzy:
Park, I.-J.
Kim, D.-W.
Kim, G.-H.
Chae, H.-J.
Jung, H.-C.
Powiązania:
https://bibliotekanauki.pl/articles/355021.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ni(OH)2
nickel
Taylor fluid flow
fine powder
Opis:
In this study, Ni(OH)2 was synthesized by the continuous reaction by the Taylor fluid flow and compared with those prepared from the conventional batch type reaction. The nickel powders were synthesized by reduction of Ni(OH)2 in an aqueous solution with hydrazine hydrate acting as the reductant. And then the characteristics of the nickel powder according to the synthesis method were compared. The average particle size of the synthesized Ni(OH)2 using Taylor reactor was generally decreased about 1.5~2.5 times more than the batch reaction. The nickel powders prepared by the batch reaction highly agglomerated with non-uniform particles. In the Taylor reaction, the agglomeration of particles was broken and uniform nickel powder was produced.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1443-1447
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of Carbon Nanotubes On The Properties Of Spark Plasma Sintered ZrO2/CNT Composites
Wpływ nanorurek węglowych na właściwości spiekanych metodą sps kompozytów ZrO2/CNT
Autorzy:
Shim, D. H.
Jung, S. S.
Kim, H. S.
Cho, H.
Kim, J. K.
Kim, T. G.
Yoon, S. J.
Powiązania:
https://bibliotekanauki.pl/articles/351266.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
CNT
ZrO2
composite
SPS
kompozyty
Opis:
Zirconia matrix ZrO2/CNT composite materials reinforced with multiwall carbon nanotubes were fabricated using a spark plasma sintering technique. The effects of the amount of CNTs addition, sintering temperature and sintering pressure on the properties of the resulting ZrO2/CNT composites were examined. 0 to 9 vol. % CNTs were dispersed in zirconia powder, and the resulting mixture was sintered. The electrical conductivity, hardness, flexural strength, and density were measured to characterize the composites. The friction and wear properties of the composites were also tested. The flexural strength and friction coefficient of the composites were improved with up to 6 vol.% of CNT addition and the flexural strength showed a close relationship with the relative density of the composite. The electrical conductivity increased with increasing proportion of the CNTs, but the efficiency was reduced at more than 6 vol.% CNTs.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1315-1318
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of pier contact accident in busan new port of south Korea by System-Theoretic Accident Model and Processes (STAMP)
Autorzy:
Kim, S. R.
Wamugi, W. J.
Camliyurt, G.
Kim, D. W.
Park, Y. S.
Powiązania:
https://bibliotekanauki.pl/articles/24201437.pdf
Data publikacji:
2023
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
maritime accidents
investigation on maritime accidents
accident analysis
System-Theoretic Accident Model and Process
maritime safety
safety at sea
pilotage
lesson
Opis:
Marine accidents are caused by complex and diverse causes. Therefore, it is necessary to analyse accidents from the perspective of the whole system rather than the existing analysis models that focus on cause-effect. The STAMP analysis is a constraint-based model that focuses on improper management or enforcement of safety-related constraints in system operation. Thus, as a case study of the application of the STAMP technique in marine accident analysis, the Milano Bridge pier contact accident that occurred on April 6, 2020 in Busan New Port of South Korea was analysed by the STAMP technique in this study. Through this study, it was proposed to break away from the domestic accident investigation, which focused only on the punishment of the ship operator, and to suggest improvements that enable organizations related to the marine accidents to take initiative to take efforts for safety.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2023, 17, 2; 299--304
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Maritime traffic characteristics in waterway with time variant CPA
Autorzy:
Jeong, J.S.
Park, G.K.
Kim, K. I.
Powiązania:
https://bibliotekanauki.pl/articles/320550.pdf
Data publikacji:
2013
Wydawca:
Polskie Forum Nawigacyjne
Tematy:
maritime traffic management
operation rate
risk assessment
collision
CPA
TCPA
Opis:
This paper aims at evaluating the collision risk between the encountering vessels under time- -variant CPA situations and then assessing the maritime traffic characteristics. Radar and AIS data are collected from Mokpo VTS in Korea. All crossing vessels that are navigating within CPA 1 miles of Mokpo-Gu waterway are analyzed. The maritime traffic characteristics is analyzed by surveying the distribution of CPA as a function of TCPA. To make it clear, the traffic operating rate in the Mokpo waterway is also computed. The averages of CPA and TCPA were observed until the encountered vessels pass safety each other after they come in a certain ship domain. As a consequence, the distribution of CPA as a function of TCPA gives a useful information to evaluate the maritime traffic safety.
Celem artykułu jest ocena ryzyka kolizji statków w funkcji zmiany wartości czasu do kolizji, a na tej podstawie oszacowanie charakterystyk determinujących ruch morski. Dane z radarów oraz systemu AIS zostały zarejestrowane w systemie VTS Mokpo w Korei. Przeanalizowano wszystkie przypadki przecinania się tras statków na podejściu do Mokpo-Gu w przypadku, gdy odległość minimalna (CPA) była mniejsza niż jedna mila morska. Charakterystyka ruchu morskiego opisana została poprzez wyznaczenie rozkładu wartości największego zbliżenia statków jako funkcji czasu do nadmiernego zbliżenia (TCPA). Dla pełnej jasności obliczono również współczynnik przepustowości drogi wodnej Mokpo. Opisano średnie wartości odległości największego zbliżenia oraz czasu do wystąpienia CPA bez względu na przekroczenia granic domeny obserwowanych statków. W konsekwencji wyznaczono rozkład wartości CPA jako funkcję TCPA, co okazuje się użyteczne dla oceny bezpieczeństwa ruchu morskiego.
Źródło:
Annual of Navigation; 2013, 20; 49-58
1640-8632
Pojawia się w:
Annual of Navigation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Oxidation Behavior of Steel with Cr Content and Water Flow Rate
Autorzy:
Kim, D.-J.
Kim, K. M.
Shin, J. H.
Cheong, Y. M.
Lee, E. H.
Lee, G. G.
Kim, S. W.
Kim, H. P.
Choi, M. J.
Lim, Y. S.
Hwang, S. S.
Powiązania:
https://bibliotekanauki.pl/articles/351548.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
steel
flow accelerated corrosion
Cr content
flow rate
surface oxides
Opis:
Fast water flow facilitates ferrous ion transport leading to flow accelerated corrosion (FAC) of carbon steel and the possibility of a large accident through a failure of a secondary pipe in a nuclear power plant. Ion transport is directly linked to oxide properties such as the thickness, chemical composition and porosity. This work deals with a precise observation of the cross section of the corroded specimen focusing on an oxide passivity and its thickness using SEM (scanning electron microscope) and TEM (transmission electron microscope) as well as an apparent weight loss and a surface observation for the specimens corroded using a rotating cylindrical electrode autoclave system in pure water of pH 7 at 150°C having dissolved oxygen below 1 ppb within a flow rate range of 0 to 10 m/s. The Cr content in steel was changed from 0.02 to 2.4 wt%. Increasing the Cr content in the alloy, the FAC rate and oxide thickness decreased. The oxide porosity tends to decrease with the Cr content and immersion time owing to the development of Cr containing oxide. The oxidation behavior is not changed with the immersion time.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1383-1387
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recovery Of Electrodic Powder From Spent Nickel-Metal Hydride Batteries (NiMH)
Odzyskiwanie proszku elektrodowego ze zużytych akumulatorów niklowo-wodorkowych (NiMH)
Autorzy:
Shin, S. M.
Shin, D. J.
Jung, G. J.
Kim, Y. H.
Wang, J. P.
Powiązania:
https://bibliotekanauki.pl/articles/356110.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nickel-metal hybride (NiMH)
electrodic powder
nickel
rare earth elements (REE)
thermal treatment
akumulator niklowo-wodorkowy
proszek elektrodowy
nikiel
pierwiastki ziem rzadkich
obróbka termiczna
Opis:
This study was focused on recycling process newly proposed to recover electrodic powder enriched in nickel (Ni) and rare earth elements (La and Ce) from spent nickel-metal hydride batteries (NiMH). In addition, this new process was designed to prevent explosion of batteries during thermal treatment under inert atmosphere. Spent nickel metal hydride batteries were heated over range of 300°C to 600°C for 2 hours and each component was completely separated inside reactor after experiment. Electrodic powder was successfully recovered from bulk components containing several pieces of metals through sieving operation. The electrodic powder obtained was examined by X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) and image of the powder was taken by scanning electron microscopy (SEM). It was finally found that nickel and rare earth elements were mainly recovered to about 45 wt.% and 12 wt.% in electrodic powder, respectively.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1139-1143
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies on the effect of coal particle size on biodepyritization of high sulfur coal in batch bioreactor
Autorzy:
Singh, S.
Srichandan, H.
Pathak, A.
Gahan, Ch. S.
Lee, S.
Kim, D. J.
Kim, B. G.
Powiązania:
https://bibliotekanauki.pl/articles/778523.pdf
Data publikacji:
2015
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
biodepyritization
coal
pyrite
stirred tank bioreactor
Opis:
The moderate thermophilic mix culture bacteria were used to depyritize the Illinois coal of varying particle sizes (-100 μm, 100-200 μm, +200 μm). Mineral libration analysis showed the presence of pyrite along with other minerals in coal. Microbial depyritization of coal was carried out in stirred tank batch reactors in presence of an iron-free 9K medium. The results indicate that microbial depyritization of coal using moderate thermophiles is an efficient process. Moreover, particle size of coal is an important parameter which affects the efficiency of microbial depyritization process. At the end of the experiment, a maximum of 75% pyrite and 66% of pyritic sulphur were removed from the median particle size. The XRD analysis showed the absence of pyrite mineral in the treated coal sample. A good mass balance was also obtained with net loss of mass ranging from 5-9% showing the feasibility of the process for large scale applications.
Źródło:
Polish Journal of Chemical Technology; 2015, 17, 1; 97-102
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of SiC Particles On Sinterability Of Al-Zn-Mg-Cu P/M Alloy
Wpływ cząstek SiC na spiekalność proszku stopowego Al-Zn-Mg-Cu
Autorzy:
Rudianto, H.
Jang, G. J.
Yang, S. S.
Kim, Y. J.
Dlouhy, I.
Powiązania:
https://bibliotekanauki.pl/articles/351304.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metal matrix composites
powder metallurgy
sintering
heat treatment
kompozyty metalowe
metalurgia proszków
spiekanie
obróbka cieplna
Opis:
Premix Al-5.5Zn-2.5Mg-0.5Cu alloy powder was analyzed as matrix in this research. Gas atomized powder Al-9Si with 20% volume fraction of SiC particles was used as reinforcement and added into the alloy with varied concentration. Mix powders were compacted by dual action press with compaction pressure of 700 MPa. High volume fraction of SiC particles gave lower green density due to resistance of SiC particles to plastic deformation during compaction process and resulted voids between particles and this might reduce sinterability of this mix powder. Sintering was carried out under ultra high purity nitrogen gas from 565°-580°C for 1 hour. High content of premix Al-5.5Zn-2.5Mg-0.5Cu alloy powder gave better sintering density and reached up to 98% relative. Void between particles, oxide layer on aluminum powder and lower wettability between matrix and reinforcement particles lead to uncompleted liquid phase sintering, and resulted on lower sintering density and mechanical properties on powder with high content of SiC particles. Mix powder with wt90% of Alumix 431D and wt10% of Al-9Si-vf20SiC powder gave higher tensile strength compare to another mix powder for 270 MPa. From chemical compositions, sintering precipitates might form after sintering such as MgZn2, CuAl2 and Mg2Si. X-ray diffraction, DSC-TGA, and SEM were used to characterize these materials.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1383-1385
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of Surface Characteristics and Physical Properties on Biodegradable Magnesium-Calcium Alloys by Anodic Oxidation
Autorzy:
Kim, J.
Lee, J.
Yang, H.
Park, S.
Lim, H.
Oh, G.
Yun, K.
Powiązania:
https://bibliotekanauki.pl/articles/1191716.pdf
Data publikacji:
2016-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
87.85.jj
87.85.jc
Opis:
The purpose of this study was to determine the effect of calcium (Ca) on the surface characteristics and physical properties of magnesium-calcium alloys after anodization. A novel binary alloy Mg-xCa (in which x=0.5, 1, or 5 wt.%) was cast by combining magnesium (99.9%) and calcium (99.9%) in an argon gas (99.99%) atmosphere. A magnesium alloy rod having a diameter of 15 mm was cut into discs, each 2 mm thick. The specimens were subjected to anodic oxidation at 120 V for 15 minutes at room temperature in an electrolyte solution consisting of calcium gluconate, sodium hexametaphosphate, and sodium hydroxide. Surface and cross-sectional morphological changes were observed using scanning electron microscopy, and the microstructures and phases were detected by means of X-ray diffraction. Hardness and surface roughness were assessed by means of a Vickers hardness tester and a surface roughness meter, respectively. The results show that the physical properties of these magnesium-calcium alloys have been improved, because it was possible to control the dissolution rate according to the amount of calcium added.
Źródło:
Acta Physica Polonica A; 2016, 129, 4; 736-741
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
High Temperature Oxidation Property of SiC Coating Layer Fabricated by Aerosol Deposition Process
Autorzy:
Ham, G.-S.
Kim, S.-H.
Park, J.-Y.
Lee, K.-A.
Powiązania:
https://bibliotekanauki.pl/articles/352142.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
silicon carbide
aerosol deposition
coating
high temperature oxidation
Opis:
This study investigated the high temperature oxidation property of SiC coated layer fabricated by aerosol deposition process. SiC coated layer could be successfully manufactured by using pure SiC powders and aerosol deposition on the Zr based alloy in an optimal process condition. The thickness of manufactured SiC coated layer was measured about 5 μm, and coating layer represented high density structure. SiC coated layer consisted of α-SiC and β-SiC phases, the same as the initial powder. The initial powder was shown to have been crushed to the extent and was deposited in the form of extremely fine particles. To examine the high temperature oxidation properties, oxidized weight gain was obtained for one hour at 1000°C by using TGA. The SiC coated layer showed superior oxidation resistance property than that of Zr alloy (substrate). The high temperature oxidation mechanism of SiC coated layer on Zr alloy was suggested. And then, the application of aerosol deposited SiC coated layer was also discussed.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1347-1351
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Wyświetlanie 1-25 z 32

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies