Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Kim, B. S." wg kryterium: Autor


Tytuł:
A Bayesian virtual metrology for quality inspection of mobile repeater systems
Autorzy:
Kim, S. D.
Kim, J. S.
Mun, B. M.
Bae, S. J.
Powiązania:
https://bibliotekanauki.pl/articles/406820.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Bayesian approach
regression
conjugate priors
ICS repeater
Markov chain Monte Carlo
Opis:
The technology of wideband code division multiple access (WCDMA) has been applied to band selective interference cancellation system (ICS) repeaters. To inspect the telecommunication quality of the systems, quality engineers must check the shape of the signals at the corresponding frequency band of the repeaters. However, measuring the signal quality is a repetitive manual task which requires much inspection time and high costs. In the case of small-sized samples, such as the example of an ICS repeater system, Bayesian approaches have been employed to improve the estimation accuracy by incorporating prior information on the parameters of the model in consideration. This research proposes a virtual method of quality inspection for products using a correlation structure of measurement data, mainly in a Bayesian regression framework. The Bayesian regression model derives prior information from historical measurement data to predict measurements of other frequency bandwidths by exploiting the correlation structure of each measurement data. Empirical results show the potential for reducing inspection costs and time by predicting the values of adjoining frequency bandwidths through measured data of a frequency bandwidth in the course of quality inspections of ICS repeater systems.
Źródło:
Management and Production Engineering Review; 2016, 7, 4; 48-53
2080-8208
2082-1344
Pojawia się w:
Management and Production Engineering Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An analysis on the thermal characteristics according to the viscosity of bearing lubricant and the cooling condition for the high speed motor spindle
Autorzy:
Choi, D. B.
Lee, J. J.
Kim, S. T.
Kwon, H. D.
Kim, C. Y.
Powiązania:
https://bibliotekanauki.pl/articles/1429194.pdf
Data publikacji:
2008
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
high speed motor spindle
thermal displacement cooling condition
lubricant viscosity
Opis:
Thermal displacement of the high speed machine tools has a large influence on machining accuracy. The high speed motor spindle with many heat sources is widely used for the high speed machine tools recently. The important problem in this spindle is to reduce and minimize the thermal effects by motor and bearings. This paper presents the analysis on thermal characteristics for high speed motor spindle system with oil-air lubricated angular contact ceramic ball bearings and built-in motor. An analysis on the thermal characteristics of spindle is performed according to the cooling conditions and the viscosity of bearing lubricants by using finite element method. This results can be applied to the design and manufacturing for the high speed motor spindle.
Źródło:
Journal of Machine Engineering; 2008, 8, 4; 88-98
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Carbon Co-Deposition During Gas Reduction of Water-Atomized Fe-Cr-Mo Powder
Autorzy:
Ali, B.
Choi, S. H.
Seo, S. J.
Maeng, D. Y.
Lee, C. G.
Kim, T. S.
Park, K. T.
Powiązania:
https://bibliotekanauki.pl/articles/352709.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
water atomization
Fe-based powder
oxide reduction
powder metallurgy
sinter-hardening alloys
Opis:
The water atomization of iron powder with a composition of Fe-3Cr-0.5Mo (wt.%) at 1600°C and 150 bar creates an oxide layer, which in this study was reduced using a mixture of methane (CH4) and argon (Ar) gas. The lowest oxygen content was achieved with a 100 cc/min flow rate of CH4, but this also resulted in a co-deposition of carbon due to the cracking of CH4. This carbon can be used directly to create high-quality, sinter hardenable steel, thereby eliminating the need for an additional mixing step prior to sintering. An exponential relationship was found to exist between the CH4 gas flow rate and carbon content of the powder, meaning that its composition can be easily controlled to suit a variety of different applications.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1119-1124
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristics Of The Porous Body Sintered By Nano-Sized Fe-Cr-Al Alloy Powder
Charakterystyka porowatego korpusu spiekanego z nanometrycznego proszku stopu Fe-Cr-Al
Autorzy:
Lee, S.-I.
Lee, S.-H.
Gu, B.-U.
Lee, D.-W.
Kim, B.-K.
Powiązania:
https://bibliotekanauki.pl/articles/356635.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Fe-Cr-Al powder
metallic sponges
sintering temperature
oxidation resistance
proszek Fe-Cr-Al
proszek nanometryczny
temperatura spiekania
odporność na utlenianie
Opis:
Porous metal with uniform honeycomb structure was successfully produced by sintering using Fe-Cr-Al nano powder, which was prepared by the pulsed wire evaporation (PWE) in ethanol. Its process consisted of the several steps; 1) coating on the surface of polyurethane sponge with the liquid droplets generated from the ethanol-based slurry where the Fe-Cr-Al nano powders were uniformly dispersed, 2) heat treatment of debinding to remove the polyurethane sponge and 3) sintering of the porous green body formed by Fe-Cr-Al nano powders. The strut thickness of porous Fe-Cr-Al was increased by the increase of spraying times in ESP step. Also, The shrinkages and the oxidation resistance of the sintered porous body was increased with increase of sintering temperature. The optimal sintering temperature was shown to 1450°C in views to maximize the oxidation resistance and sinterability.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1275-1279
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CO Oxidation Properties Of Selective Dissoluted Metallic Glass Composites
Utlenianie wybranych rozcieńczonych kompozytów szkieł metalicznych
Autorzy:
Kim, S. Y.
Lee, M. H.
Kim, T. S.
Kim, B. S.
Powiązania:
https://bibliotekanauki.pl/articles/355092.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
CO oxidation
metallic glasses
porous metal
catalyst materials
utlenianie
szkło metaliczne
metale porowate
materiał katalityczny
Opis:
Porous metallic materials have been widely used in many fields including aerospace, atomic energy, electro chemistry and environmental protection. Their unique structures make them very useful as lightweight structural materials, fluid filters, porous electrodes and catalyst supports. In this study, we fabricated Ni-based porous metallic glasses having uniformly dispersed micro meter pores by the sequential processes of ball-milling and chemical dissolution method. We investigated the application of our porous metal supported for Pt catalyst. The oxidation test was performed in an atmosphere of 1% CO and 3% O2. Microstructure observation was performed by using a scanning electron microscope. Oxidation properties and BET (Brunauer, Emmett, and Teller) were analyzed to understand porous structure developments. The results indicated that CO Oxidation reaction was dependent on the specific surface area.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1227-1229
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combined Effect of Zr and Si on Isothermal Oxidation of Ti
Autorzy:
Ha, S.-H.
Kim, B.-H.
Yoon, Y.-O.
Lim, H.-K.
Kim, S. K.
Powiązania:
https://bibliotekanauki.pl/articles/353260.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ti
Zr
Si
silicide
oxidation
Opis:
In this study, the combined effect of Zr and Si on isothermal oxidation of Ti for 25 and 50h at 820°C, which is the temperature related to exhaust valves operation, was investigated. Si addition into Ti-5mass%Zr alloy led to a distribution of silicide Ti5Si3 phase formed by a eutectic reaction. The Ti sample containing only Zr showed more retarded oxidation rate than Ti-6Al-4V, the most prevalent Ti alloy, at the same condition. However, while a simultaneous addition of Zr and Si resulted in greater increase of oxidation resistance. The oxide layer formed after the addition of Zr and Si comprised TiO2, ZrO2, and SiO2.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1493-1495
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative study of ROS on embedded system for a mobile robot
Autorzy:
Kim, M. S.
Delgado, R.
Choi, B. W.
Powiązania:
https://bibliotekanauki.pl/articles/385189.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
Robot Operation System
mobile robot
embedded system
navigation
SLAM
path planner
Opis:
This paper presents a comparative study of Robot Operating System (ROS) packages for mobile robot navigation on an embedded system. ROS provides various libraries and tools in developing complex robot software. We discuss the process of porting ROS to an open embedded platform, which serves as the main controller for a mobile robot. In the case of driving the robot, ROS provides local path planners such as the base, elastic band, and timed elastic band. The local planners are compared and analyzed in terms of accuracy in tracking the global path conducted on a robot model using Gazebo, 3D simulation tool provided by ROS. We also discussed the difference in performance of deploying ROS packages on a personal computer and on the embedded environment. Experiments were performed by controlling two different mobile robots with results showing that tracking error is highly dependent on the goal tolerance. This study will serve as a promising metric in improving the performance of mobile robots using ROS navigation packages.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2018, 12, 3; 61-67
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Compositional Dependence of Hardness of Ge-Sb-Se Glass for Molded Lens Applications
Zależność stężeniowa twardości szkła Ge-Sb-Se do zastosowań na formowane soczewki
Autorzy:
Park, J. K.
Lee, J. H.
Shin, S. Y.
Yi, J. H.
Lee, W. H.
Park, B. J.
Choi, J. H.
Kim, N. Y.
Choi, Y. G.
Powiązania:
https://bibliotekanauki.pl/articles/352228.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
chalcogenide glasses
Ge-Sb-Se glass
infrared lens
molded lens
infrared camera
szkło
Ge-Sb-Se
soczewki formowane
twardość szkła
kamera termowizyjna
Opis:
Chalcogenide glass in the ternary Ge-Sb-Se system is inherently moldable, thus being considered as a strong candidate material for use in infrared-transmitting lens applications from the viewpoint of thermal and mechanical stability. In an effort to experimentally determine compositional region suitable for the molded lens applications, we evaluate its compositional dependence of hardness. Among the constituent atoms, Ge content turns out to exert a most conspicuous correlation with hardness. This phenomenological behavior is then explained in connection with the structural evolution that Ge brings about.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1205-1208
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Double Step Sintering Behavior Of 316L Nanoparticle Dispersed Micro-Sphere Powder
Dwuetapowe spiekanie mikrosferycznych nanocząstek proszku 316L
Autorzy:
Jeon, B.
Sohn, S. H.
Lee, W.
Han, C.
Kim, Y. D.
Choi, H.
Powiązania:
https://bibliotekanauki.pl/articles/355221.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
316L stainless steel
nanoparticle dispersed micro-sphere
pulse wire explosion
sintering
stal nierdzewna 316L
spiekanie dwuetapowe
mikrosferyczne nanocząstki
Opis:
316L stainless steel is a well-established engineering material and lots of components are fabricated by either ingot metallurgy or powder metallurgy. From the viewpoints of material properties and process versatility, powder metallurgy has been widely applied in industries. Generally, stainless steel powders are prepared by atomization processes and powder characteristics, compaction ability, and sinterability are quite different according to the powder preparation process. In the present study, a nanoparticle dispersed micro-sphere powder is synthesized by pulse wire explosion of 316L stainless steel wire in order to facilitate compaction ability and sintering ability. Nanoparticles which are deposited on the surface of micro-powder are advantageous for a rigid die compaction while spherical micro-powder is not to be compacted. Additionally, double step sintering behavior is observed for the powder in the dilatometry of cylindrical compact body. Earlier shrinkage peak comes from the sintering of nanoparticle and later one results from the micro-powder sintering. Microstructure as well as phase composition of the sintered body is investigated.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1155-1158
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect Of Different Mechanical Milling Processes On Morphology And Microstructural Changes Of Nano And Micron Al-Powders
Wpływ różnych procesów mielenia na morfologię i mikrostrukturę nanometrycznych i mikronowych proszków Al
Autorzy:
Kim, H.-S.
Madavali, B.
Eom, T.-J.
Kim, C.- M.
Koo, J.-M.
Lee, T. H.
Hong, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/355715.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Al alloys
high-energy ball milling
low energy ball milling
plastic deformation
stopy Al
wysokoenergetyczne mielenie kulkowe
mielenie energooszczędne
odkształcenia plastyczne
Opis:
In this research, effect of the various mechanical milling process on morphology and microstructural changes of nano and micron Al-powders was studied. The milling of Al-powders was performed by both high energy and low energy ball milling process. The influence of milling (pulverizing) energy on the structural changes of Al-powders was studied. Al-nanoparticles were agglomerated during the MA and its size was increased with increasing milling while micron Al-powder gets flattened shape during high energy ball milling due to severe plastic deformation. Meanwhile, structural evolution during high energy ball milling of the nano powder occurred faster than that of the micron powder. A slight shift in the position of X-ray diffraction peaks was observed in nano Al-powders but it was un-altered in macro Al-powders. The variation in lattice parameters was observed only for nano Al powders during the high energy ball milling due to lattice distortion.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2B; 1235-1239
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Ga2O3 Nanoparticles Dispersion on Microstructure and Thermoelectric Properties of p-Type BiSbTe Based Alloys
Autorzy:
Kim, E.-B.
Koo, J.-M.
Hong, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/351366.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermoelectric properties
Bi0.5Sb1.5Te3 alloys
Seebeck coefficient
mechanical alloying
spark plasma sintering
Opis:
In this study, p-type Bi0.5Sb1.5Te3 based nanocomposites with addition of different weight percentages of Ga2O3 nanoparticles are fabricated by mechanical milling and spark plasma sintering. The fracture surfaces of all Bi0.5Sb1.5Te3 nanocomposites exhibited similar grain distribution on the entire fracture surface. The Vickers hardness is improved for the Bi0.5Sb1.5Te3 nanocomposites with 6 wt% added Ga2O3 due to exhibiting fine microstructure, and dispersion strengthening mechanism. The Seebeck coefficient of Bi0.5Sb1.5Te3 nanocomposites are significantly improved owing to the decrease in carrier concentration. The electrical conductivity is decreased rapidly upon the addition of Ga2O3 nanoparticle due to increasing carrier scattering at newly formed interfaces. The peak power factor of 3.24 W/mK2 is achieved for the base Bi0.5Sb1.5Te3 sintered bulk. TheBi0.5Sb1.5Te3 nanocomposites show low power factor than base sample due to low electrical conductivity.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 993-997
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Mechanical Activation on the in situ Formation of TiB2 Particulates in the Powder Mixture of TiH2 and FeB
Autorzy:
Huynh, X.-K.
Kim, B.-W.
Kim, J. S.
Powiązania:
https://bibliotekanauki.pl/articles/355844.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mechanical activation
in situ formation
TiB2 particulate
Fe-matrix
specific ball-milling energy
Opis:
The in situ formation of TiB2 particulates via an interface reaction between Ti and FeB powders was studied. The effects of mechanical activation by high-energy milling on the decomposition of TiH2 and the interface reactions between Ti and FeB powders to form TiB2 were investigated. Powder mixtures were fabricated using planetary ball-milling under various milling conditions. The specific ball-milling energy was calculated from the measured electrical power consumption during milling process. High specific milling energy (152.6 kJ/g) resulted in a size reduction and homogeneous dispersion of constituent powders. This resulted in a decrease in the decomposition temperature of TiH2 and an increase in the formation reaction of TiB2 particulates in the Fe matrix, resulting in a homogeneous microstructure of nanoscale TiB2 evenly distributed within the Fe matrix. In contrast, the powder mixture milled with low specific milling energy (36.5 kJ/g) showed an inhomogeneous microstructure composed of relatively large Fe-Fe2 B particles surrounded by a thin layer of Fe-TiB2 within a finely dispersed Fe-TiB2 matrix region.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1393-1398
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Milling Time Parameter on the Microstructure and the Thermoelectric Properties of n-Type Bi2Te2.7Se0.3 Alloys
Autorzy:
Sharief, P.
Madavali, B.
Koo, J. M.
Kim, H. J.
Hong, S.
Hong, S.-J.
Powiązania:
https://bibliotekanauki.pl/articles/354418.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ball milling
milling time
microstructure
thermoelectric properties
ZT
Opis:
Nanostructured thermoelectric materials receiving great attention for its high thermoelectric performance. In this research, nanostructured n-type Bi2 Te2.7 Se0.3 alloys have prepared using high energy ball milling and followed by spark plasma sintering. Also, we have varied ball milling time to investigate milling time parameter on the thermoelectric properties of n-type Bi2 Te2.7 Se0.3 powder. The powders were discrete at 10 min milling and later particles tend to agglomerate at higher milling time due to cold welding. The bulk fracture surface display multi-scale grains where small grains intersperse in between large grains. The maximum Seebeck coefficient value was obtained at 20-min milling time due to their lower carrier density. The κ values were decreased with increasing milling time due to the decreasing trend observed in their κL values. The highest ZT of 0.7 at 350 K was observed for 30-min milling time which was ascribed to its lower thermal conductivity. The Vickers hardness values also greatly improved due to their fine microstructure.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 2; 585-590
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of acute lipopolysaccharide-induced toxemia model on some neglected blood parameters
Autorzy:
Adam, G.O.
Lee, H.R.
Lee, S.J.
Kim, S.J.
Kim, G.B.
Kang, H.S.
Powiązania:
https://bibliotekanauki.pl/articles/2087627.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Toxemia
lipopolysaccharide
base excess
pH
animal model
Źródło:
Polish Journal of Veterinary Sciences; 2018, 21, 4; 665-671
1505-1773
Pojawia się w:
Polish Journal of Veterinary Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and Characterization of CoCrFeNiMn High Entropy Alloy Powder Processed by Gas Atomization
Autorzy:
Park, T. G.
Lee, S. H.
Lee, B.
Cho, H. M.
Choi, W. J.
Kim, B. S.
Shin, K. S.
Kim, T.-S.
Powiązania:
https://bibliotekanauki.pl/articles/353649.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
high entropy alloy
gas atomization
spark plasma sintering
CoCrFeNiMn
Opis:
In this study, precisely controlled large scale gas atomization process was applied to produce spherical and uniform shaped high entropy alloy powder. The gas atomization process was carried out to fabricate CoCrFeNiMn alloy, which was studied for high ductility and mechanical properties at low temperatures. It was confirmed that the mass scale, single phase, equiatomic, and high purity spherical high entropy alloy powder was produced by gas atomization process. The powder was sintered by spark plasma sintering process with various sintering conditions, and mechanical properties were characterized. Through this research, we have developed a mass production process of high quality and spherical high entropy alloy powder, and it is expected to expand applications of this high entropy alloy into fields such as powder injection molding and 3D printing for complex shaped components.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 1055-1059
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies