Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Jakubus, M" wg kryterium: Autor


Tytuł:
Rola preparatu ECO TABS™ w stabilizacji osadów ściekowych Cz. II: Ocena właściwości mikrobiologicznych osadów
ECO TABS™ preparation action in stabilization of sewage sludge Part II: Assessment of microbiological properties of sludge
Autorzy:
Wolna-Maruwka, A.
Jakubus, M.
Jordanowska, J.
Powiązania:
https://bibliotekanauki.pl/articles/126728.pdf
Data publikacji:
2016
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
biopreparat
mikroorganizmy
osad ściekowy
stabilizacja
biopreparation
microorganisms
sewage sludge
stabilization
Opis:
Powstające w procesach oczyszczania ścieków osady poddawane są najczęściej stabilizacji w otwartych komorach fermentacyjnych w celu zmniejszenia ich podatności do zagniwania oraz zmniejszenia ilości organizmów chorobotwórczych. Zawartość składników organicznych w osadach ściekowych (ok. 80% s.m. w osadzie surowym) jest czynnikiem determinującym stosowanie biopreparatów w celu przyspieszenia procesu biodegradacji masy organicznej. Biopreparaty tworzy się na bazie odpowiednio dobranych szczepów rodzimych lub allochtonicznych drobnoustrojów. Poddaje się je starannej selekcji, a następnie wprowadza do danych warunków środowiskowych. Z uwagi na aspekty praktyczne biopreparaty komercyjne wykazują szereg zalet, przede wszystkim są łatwe w pozyskaniu, magazynowaniu, jak również w dozowaniu. W skład biopreparatów, których zadaniem jest optymalizacja rozkładu materii organicznej, należą bakterie rodzaju Pseudomonas oraz Bacillus. Ich cechą charakterystyczną jest niezwykłe bogactwo nietypowych szlaków metabolicznych, wysokie zdolności adaptacyjne do różnych warunków środowiskowych, wytwarzanie endospor w przypadku Bacillus sp., degradacja złożonych i często toksycznych substancji, w tym również fakultatywne przełączanie aparatu metabolicznego na warunki beztlenowe (w przypadku Pseudomonas sp.). Celem przeprowadzonych badań było monitorowanie zmian liczebności heterotroficznych bakterii właściwych i grzybów pleśniowych, jak również poziomu aktywności dehydrogenaz w osadzie ściekowych po zastosowaniu biopreparatów ECO TABSTM POND TABLETS oraz ECO TABSTM ECO GRANULAR SHOCK. Obiektem badań były dwie frakcje osadu ściekowego pobieranego z otwartej komory fermentacyjnej, znajdującej się na terenie mechaniczno-biologicznej oczyszczalni ścieków komunalnych we Wrześni. Do komory fermentacyjnej w okresie od 27 kwietnia do 25 czerwca 2014 roku (codziennie) aplikowano 15 sztuk ECO TABSTM POND TABLETS i 15 sztuk ECO TABSTM ECO GRANULAR SHOCK firmy ECO TABS™ Europe. Już na początku eksperymentu zaobserwowano rozdział całej mieszaniny na 2 frakcje: cięższą opadającą na dół zbiornika i lżejszą unoszącą się w jego górnej części. W związku z tym do analiz mikrobiologicznych i biochemicznych pobierano próbki z obu frakcji jednocześnie, co 12-14 dni w kolejnych, sześciu terminach i po 25 dniach w ostatnim terminie badań (termin I - 27 kwietnia 2014, II - 5 maja, III - 22 maja, IV - 4 czerwca, V - 16 czerwca, VI - 30 czerwca, VII - 25 lipca 2014). Analizy mikrobiologiczne przeprowadzono z zastosowaniem metody płytkowej Kocha i polegały na oznaczeniu ogólnej liczebności bakterii heterotroficznych i grzybów pleśniowych. Osad ściekowy poddano również analizie biochemicznej, która polegała na określeniu metodą spektrofotometryczną poziomu aktywności dehydrogenaz. Na podstawie uzyskanych wyników badań stwierdzono, że zaaplikowanie biopreparatów ECO TABSTM POND TABLETS oraz ECO TABS TM ECO GRANULAR SHOCK przyczyniło się do istotnie statystycznego wzrostu ogólnej liczby heterotroficznych bakterii właściwych, grzybów pleśniowych, jak również poziomu aktywności dehydrogenaz w osadzie, pochodzącym zarówno z dolnej, jak i górnej części komory fermentacyjnej. Najsilniejsze namnażanie się mikroorganizmów oraz najwyższą ich aktywność odnotowano w ostatnich, trzech terminach analiz. Ponadto wykazano, że wyższą liczebnością oraz aktywnością analizowanych drobnoustrojów charakteryzowała się dolna frakcja osadu ściekowego.
Sludge produced in sewage treatment processes is usually stabilized in open fermentation chambers in order to reduce its rotting tendency and to reduce the amount of pathogenic organisms. The content of organic components in sewage sludge (about 80% of dry weight in raw sludge) is a factor that determines the use of biopreparations to accelerate the process of organic mass degradation. Biopreparations are based on appropriately selected native or allochthonous microorganisms. They are carefully selected to match the environmental conditions. Due to practical aspects commercial biopreparations exhibit a wide range of advantages - above all, they can be easily acquired, stored and dosed. Pseudomonas and Bacillus are the bacterial genera used as components in biopreparations. They are responsible for optimisation of decomposition of organic matter. They are characterised by unique richness of atypical metabolic pathways, high adaptability to different environmental conditions, formation of endospores (Bacillus sp.), degradation of complex and usually toxic substances and facultative switching of the metabolic apparatus to anaerobic conditions (Pseudomonas sp.). The aim of the study was to monitor variation in the population of heterotrophic eubacteria and moulds and to monitor dehydrogenases activity in sewage sludge after the application of ECO TABSTM POND TABLETS and ECO TABSTM ECO GRANULAR SHOCK biopreparations. The research objects were two fractions of sewage sludge collected from an open fermentation chamber located in a biomechanical sewage treatment plant in Września, Poland. From 27 April to 25 June 2014 15 pieces of ECO TABSTM POND TABLETS and 15 pieces of ECO TABSTM ECO GRANULAR SHOCK (ECO TABS™ Europe) were applied daily to the fermentation chamber. As early as the beginning of the experiment we observed that the mixture had split into two fractions: a heavier fraction, which dropped to the bottom of the container and a lighter fraction, which floated in the upper part of the container. In view of this fact, samples for microbiological and biochemical analyses were collected from both fractions simultaneously, every 12-14 days at six consecutive terms and after 25 days at the last term of the research (term I - 27 April 2014, II - 5 May, III - 22 May, IV - 4 June, V - 16 June, VI - 30 June, VII - 25 July 2014). The microbiological analyses consisted in applying Koch's plate technique to determine the total number of heterotrophic bacteria and moulds. The sewage sludge was also analysed biochemically, where spectrophotometry was applied to determine the level of dehydrogenases activity. The research findings revealed that the application of ECO TABS TM POND TABLETS and ECO TABS TM ECO GRANULAR SHOCK biopreparations caused a statistically significant increase in the total number of heterotrophic bacteria and moulds. The biopreparations also increased dehydrogenases activity in the sludge collected both from the upper and lower parts of the fermentation chamber. The greatest proliferation of microorganisms and their highest activity was observed at the last three terms of analyses. Apart from that, the lower fraction of the sewage sludge proved to have greater populations of the microorganisms under study and the microorganisms were more active.
Źródło:
Proceedings of ECOpole; 2016, 10, 1; 367-378
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Assessment of Resistance to Thermal Fatigue and Thermal Shock of Cast Iron Used for Glass Moulds
Autorzy:
Stradomski, G.
Gzik, S.
Jakubus, A.
Nadolski, M.
Powiązania:
https://bibliotekanauki.pl/articles/379733.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermal fatigue
high temperature parameters
cracking
cast iron
production of glass
zmęczenie termiczne
parametry wysokiej temperatury
pękanie
żeliwo
produkcja szkła
Opis:
Constantly developing production process and high requirements concerning the quality of glass determine the need for continuous improvement of tools and equipment needed for its production. Such tools like forms, most often made of cast-iron, are characterized by thick wall thickness compared to their overall dimensions and work in difficult conditions such as heating of the surface layer, increase of thermal stresses resulting from the temperature gradient on the wall thickness, occurrence of thermal shock effect, resulting from cyclically changing temperatures during filling and emptying of the mould. There is no best and universal method for assessing how samples subjected to cyclic temperature changes behave. Research on thermal fatigue is a difficult issue, mainly due to the instability of this parameter, which depends on many factors, such as the temperature gradient in which the element works, the type of treatment and the chemical composition of the material. Important parameters for these materials are at high temperature resistance to thermal shock and thermal fatigue what will be presented in this paper.
Źródło:
Archives of Foundry Engineering; 2018, 18, 3; 173-178
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena wpływu dodatków wzbogacających kompostowaną korę sosnową na liczebność bakterii i grzybów oraz ich aktywność enzymatyczną
Assessment of the Impact of Enriching Additives in Composted Pine Bark on the Number of Bacteria and Fungi and Their Enzymatic Activity
Autorzy:
Starzyk, J.
Jakubus, M.
Swędrzyńska, D.
Powiązania:
https://bibliotekanauki.pl/articles/1819248.pdf
Data publikacji:
2013
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
kora sosnowa
bakterie
grzyby
aktywność enzymatyczna
municipal solid waste
sewage sludge
soil
Opis:
In the composting process, microorganisms meet the primary role of which is related to the metabolic activity of the process of synthesis of humus. Properly made compost is characterized by a large value of fertilizer, often exceeding the fertilizer value of manure. However, in the production of compost main objective is to optimize the conditions of this process. The aim of this study was to determine the dynamics of changes in the number of selected groups of microorganisms and dehydrogenase activity levels occurring during the composting of pine bark, depending on the application of different organic additives and microbiological preparation and changes in pH and temperature. The experiment was established in 2011 in the Forest District Antonin in Wielkopolska. Composting was carried out in seven piles of pine bark supplemented with different doses of green mass of legumes, Effective Microorganisms solution and urea. During the composting process, samples were taken five times for microbiological analysis. It were analyzed number of mesophilic and thermophilic bacteria and fungi on selective substrates. Isolated colonies were used to determine the total number of tested microorganisms. Furthermore, were tested the enzymatic activity of microorganisms, determining the activity of the dehydrogenase, using the spectrophotometric method with TTC as a substrate. Also were analyzed the impact of differences in the composition of compost on the growth of microorganisms. The following terms were also tested the pH level and the temperature of the windrows. It was found that additives composted pine bark with the exception only of the preparation EM-A stimulating influence on the population growth of bacteria meso-and thermophilic composting in windrows. A particularly preferred combination proved to be a combination of the green mass of the plant with solution of Effective Microorganisms. Changes in the number of analyzed groups of microorganisms also fundamentally affect temperature changes during the composting process. During the high temperature composting piles was observed in a significant increase in the number of thermophilic bacteria and fungi. In most of the analyzed terms the largest number of thermophilic bacteria and fungi was observed in combination of pine bark, and extended to the highest dose of the green mass of the plants and EM-A. Dehydrogenase complex activity did not increase with the increase in the number of analyzed groups of microorganisms.
Źródło:
Rocznik Ochrona Środowiska; 2013, Tom 15, cz. 3; 2683-2696
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristics of Graphite Precipitates in Aluminium Cast Iron Treated with Cerium Mixture
Autorzy:
Soiński, M. S.
Jakubus, A.
Kordas, P.
Skurka, K.
Powiązania:
https://bibliotekanauki.pl/articles/381207.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metallography
cast iron
aluminium
spheroidization
graphite precipitates
metalografia
żeliwo
sferoidyzacja
wydzielenia grafitu
Opis:
The work determined the influence of aluminium in the amount from about 1% to about 7% on the graphite precipitates in cast iron with relatively high silicon content (3.4% to 3.90%) and low manganese content (about 0.1%). The cast iron was spheroidized with cerium mixture and graphitized with ferrosilicon. The performed treatment resulted in occurring of compact graphite precipitates, mainly nodular and vermicular, of various size. The following parameters were determined: the area percentage occupied by graphite, perimeters of graphite precipitates per unit area, and the number of graphite precipitates per unit area. The examinations were performed by means of computer image analyser, taking into account four classes of shape factor. It was found that as the aluminium content in cast iron increases from about 1.1% to about 3.4%, the number of graphite precipitates rises from about 700 to about 1000 per square mm. For higher Al content (4.2% to 6.8%) this number falls within the range of 1300 – 1500 precipitates/mm2. The degree of cast iron spheroidization increases with an increase in aluminium content within the examined range, though when Al content exceeds about 2.8%, the area occupied by graphite decreases. The average size of graphite precipitates is equal to 11-15 μm in cast iron containing aluminium in the quantity from about 1.1% to about 3.4%, and for higher Al content it decreases to about 6 μm.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1; 93-98
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Initial Assessment of Abrasive Wear Resistance of Austempered Cast Iron with Vermicular Graphite
Wstępna ocena odporności na ścieranie żeliwa z grafitem wermikularnym hartowanego izotermicznie
Autorzy:
Soiński, M. S.
Jakubus, A.
Powiązania:
https://bibliotekanauki.pl/articles/351080.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast iron
vermicular graphite
austempering
abrasive wear resistance
żeliwo
grafit wermikularny
odporność na ścieranie
hartowanie izotermiczne
Opis:
The work compares the abrasive wear resistance of cast iron containing vermicular graphite, measured in the as-cast state and after austempering carried out at 290°C, 340°C, or 390°C. Theexaminations were performed by means of the T-01M tribological tester using the pin-on-disc configuration. Specimens used for examinations were taken from the end tabs of the tensile specimens, these being cut out of the test walls of the double-leg keel block test castings. Examinations proved that the austempering process increases the abrasive wear resistance of vermicular cast iron by several times as compared with the as-cast material. A tendency for a slight decrease in abrasive wear with an increase in austempering temperature can be stated. The coefficient of friction took a little higher values for cast iron after thermal treatment than for the as-cast material. The work was completed with roughness examination by means of electron scanning microscopy.
W pracy porównano odporność na ścieranie żeliwa z grafitem wermikularnym w stanie lanym oraz po hartowaniu izotermicznym przeprowadzonym w temperaturach 290°C, 340°C i 390°C. Badaniaodporności na ścieranie przeprowadzono przy użyciu zestawu trybologicznego T-01M typu trzpień-tarcza. Próbki do badań pochodziły z próbek wytrzymałościowych wyciętych ze ścianek badawczych wlewków próbnych w kształcie odwróconej litery „U”. Badania wykazały, że poddanie żeliwa wermikularnego hartowaniu izotermicznemu prowadzi do kilkukrotnego wzrostu odporności tworzywa na ścieranie w porównaniu z żeliwem w stanie lanym. Zaobserwowano niewielki spadek zużycia wraz ze wzrostem temperatury hartowania. Współczynnik tarcia dla żeliwa po obróbce cieplej przybrał nieco większe wartości aniżeli w przypadku żeliwa w stanie lanym. W ramach pracy wykonano także badania chropowatości z wykorzystaniem mikroskopii skaningowej.
Źródło:
Archives of Metallurgy and Materials; 2014, 59, 3; 1073-1076
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Initial Assessment of Graphite Precipitates in Vermicular Cast Iron in the As-Cast State and after Thermal Treatments
Autorzy:
Soiński, M. S.
Jakubus, Aneta
Borowiecki, B.
Mierzwa, P.
Powiązania:
https://bibliotekanauki.pl/articles/2126913.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
vermicular cast iron
graphite precipitates
thermal treatments
austempering
żeliwo wermikularne
morfologia grafitu
obróbka termiczna
hartowanie
Opis:
The purpose of the work was to determine the morphology of graphite that occurs in vermicular cast iron, both in the as-cast state and after heat treatment including austenitization (held at a temperature of 890°C or 960°C for 90 or 150 min) and isothermal quenching (i.e. austempering, at a temperature of 290°C or 390°C for 90 or 150 min). In this case, the aim here was to investigate whether the heat treatment performed, in addition to the undisputed influence of the cast iron matrix on the formation of austenite and ferrite, also affects the morphology of the vermicular graphite precipitates and to what extent. The investigations were carried out for the specimens cut from test coupons cast in the shape of an inverted U letter (type IIb according to the applicable standard); they were taken from the 25mm thick walls of their test parts. The morphology of graphite precipitates in cast iron was investigated using a Metaplan 2 metallographic microscope and a Quantimet 570 Color image analyzer. The shape factor F was calculated as the quotient of the area of given graphite precipitation and the square of its perimeter. The degree of vermicularization of graphite was determined as the ratio of the sum of the graphite surface and precipitates with F <0.05 to the total area occupied by all the precipitations of the graphite surface. The examinations performed revealed that all the heat-treated samples made of vermicular graphite exhibited the lower degree of vermicularization of the graphite compared to the corresponding samples in the as-cast state (the structure contains a greater fraction of the nodular or nearly nodular precipitates). Heat treatment also caused a reduction in the average size of graphite precipitates, which was about 225μm2 for the as-cast state, and dropped to approximately 170-200 μm2 after the austenitization and austempering processes.
Źródło:
Archives of Foundry Engineering; 2021, 21, 4; 131--136
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigations of Ferritic Nodular Cast Iron Containing About 5-6% Aluminium
Autorzy:
Soiński, M. S.
Kordas, P.
Skurka, K.
Jakubus, A.
Powiązania:
https://bibliotekanauki.pl/articles/379726.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technology
innovative foundry material
metallography
Al-alloyed cast iron
spheroidization
graphite precipitates
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
metalografia
żeliwo stopowe
sferoidyzacja
wydzielenia grafitu
Opis:
The work presents results of investigations concerning the production of cast iron containing about 5-6% aluminium, with the ferritic matrix in the as-cast state and nodular or vermicular graphite precipitates. The examined cast iron came from six melts produced under the laboratory conditions. It contained aluminium in the amount of 5.15% to 6.02% (carbon in the amount of 2.41% to 2.87%, silicon in the amount of 4.50% to 5.30%, and manganese in the amount of 0.12% to 0.14%). After its treatment with cerium mixture and graphitization with ferrosilicon (75% Si), only nodular and vermicular graphite precipitates were achieved in the examined cast iron. Moreover, it is possible to achieve the alloy of pure ferritic matrix, even after the spheroidizing treatment, when both the aluminium and the silicon occur in cast iron in amounts of about 5.2÷5.3%.
Źródło:
Archives of Foundry Engineering; 2016, 16, 4; 141-146
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Production of Castings in the World and in Selected Countries from 1999 to 2013
Autorzy:
Soiński, M. S.
Jakubus, A.
Kordas, P.
Skurka, K.
Powiązania:
https://bibliotekanauki.pl/articles/383237.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
production of castings
cast iron
cast steel
non-ferrous alloys
produkcja odlewów
żeliwo
staliwo
stopy metali nieżelaznych
Opis:
The paper compares the foundry production in years 1999-2013 on a world scale, in countries counted among the leading producers of castings, and in Poland. Various types of foundry alloys were taken into account. It was found that the position of China – the leader in the world production of castings – was not changed over many years, however China's share in the total production of casting has stabilised at the level of 42-44% during the recent five years. In the analysed period of time Poland increased the share in the world production of castings from 1.07% to about 1.23%, so that Polish production of castings was almost doubled. There is a tendency on the world scale that the grey cast iron fraction in the total production of castings decreases, while an increase occurs as far as spheroidal graphite cast iron, cast steel, and aluminium alloy castings are concerned.
Źródło:
Archives of Foundry Engineering; 2015, 15, 1 spec.; 103-110
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure of Foundry Production in the World and in Poland over the 1974-2013 Period
Autorzy:
Soiński, M. S.
Skurka, K.
Jakubus, A.
Kordas, P.
Powiązania:
https://bibliotekanauki.pl/articles/381277.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
foundry production
cast iron
cast steel
aluminium alloy
nonferrous alloy
produkcja odlewnicza
żeliwo
staliwo
stop aluminium
stop nieżelazny
Opis:
The paper presents data illustrating the total production of castings in the world and in Poland over the 1974-2013 period. The fractions of basic casting alloys in the total amount of material used for the production of metal castings during the considered period of time were found. It was noticed that the fraction of grey cast iron castings in the total amount of the produced castings decreased significantly over the past 40 years, both on a global scale (from about 65-75% to about 45%) and in Poland (from about 75-80% to about 45-55%). The fraction of SG iron increased considerably, up to about 25% in the world, and up to about 12-16% in Poland. The fraction of malleable became almost negligible (about 1%). The fraction of cast steel took different course in Poland and in the world: it stabilised on a global scale at about 10% in recent years, but dropped down to the level of about 4-7% in Poland. The use of aluminium alloys for the production of casting grew dynamically; their fraction in the total production of casting rose from somewhat less than 4% to almost 15% on a global scale. As far as Poland is considered, this growth was ever more intensive: from about 6-8% to about 25-30% in the 1989-2013 period (the detailed data for the previous period of time are lacking).
Źródło:
Archives of Foundry Engineering; 2015, 15, 2 spec.; 69-76
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Aluminium on Graphitization of Cast Iron Treated with Cerium Mixture
Autorzy:
Soiński, M. S.
Jakubus, A.
Kordas, P.
Skurka, K.
Powiązania:
https://bibliotekanauki.pl/articles/380446.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast iron
aluminium
graphitization
cerium mixture
żeliwo
grafityzacja
cer
Opis:
The work determined the influence of aluminium in the amount from about 0.6% to about 8% on graphitization of cast iron with relatively high silicon content (3.4%-3.9%) and low manganese content (about 0.1%). The cast iron was spheroidized with cerium mixture and graphitized with ferrosilicon. It was found that the degree of graphitization increases with an increase in aluminium content in cast iron up to 2.8%, then decreases. Nodular and vermicular graphite precipitates were found after the applied treatment in cast iron containing aluminium in the amount from about 1.9% to about 8%. The Fe3AlCx carbides, increasing brittleness and deteriorating the machinability of cast iron, were not found in cast iron containing up to about 6.8% Al. These carbides were revealed only in cast iron containing about 8% Al.
Źródło:
Archives of Foundry Engineering; 2014, 14, 2; 95-100
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence of Aluminium on the Spheroidization of Cast Iron Assessed on the Basis of Wedge Test
Autorzy:
Soiński, M. S.
Jakubus, A.
Stradomski, G.
Powiązania:
https://bibliotekanauki.pl/articles/383125.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metallography
cast iron
aluminium
spheroidization
graphite precipitates
metalografia
żeliwo
sferoidyzacja
wydzielenia grafitu
Opis:
The paper discusses the influence of aluminium in quantities from about 1.9% to about 4.7% on both the alloy matrix and the shape of graphite precipitates in cast iron spheroidized with cerium mixture (added in the quantity of 0.11%) and inoculated with ferrosilicon (1.29%). The metallographic examinations were carried out for specimens cut out of the wedge test castings (22 mm base width, 120 mm height, 180 mm length) halfway along their length. It was found that the highest susceptibility to graphitization exhibits the cast iron containing about 2.8% Al. The alloy matrices were classified and the degrees of graphite spheroidization were determined. Microscopic observations were carried out along the wedge test casting height at several places, the first distant by 20 mm from the specimen apex, the next ones every 20 mm farther. Precipitates of nodular and vermicular graphite were found in the cast iron structure. The results of examination allow to state that cast iron spheroidized in the way described here is characterised by the degree of spheroidization which increase with an increase in aluminium content within the examined range.
Źródło:
Archives of Foundry Engineering; 2013, 13, 1 spec.; 163-168
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of small amounts of aluminium on the effectiveness of cast iron spheroidization with magnesium
Autorzy:
Soiński, M. S.
Jakubus, A.
Powiązania:
https://bibliotekanauki.pl/articles/379819.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metallography
aluminium
cast iron
spheroidization
graphite precipitates
metalografia
żeliwo
sferoidyzacja
wydzielenia grafitu
Opis:
The influence of aluminium added in amounts of about 1.6%, 2.1%, or 2.8% on the effectiveness of cast iron spheroidization with magnesium was determined. The cast iron was melted and treated with FeSiMg7 master alloy under industrial conditions. The metallographic examinations were performed for the separately cast rods of 20 mm diameter. They included the assessment of the shape of graphite precipitates and of the matrix structure. The results allowed to state that the despheroidizing influence of aluminium (introduced in the above mentioned quantities) is the stronger, the higher is the aluminium content in the alloy. The results of examinations carried out by means of a computer image analyser enabled the quantitative assessment of the considered aluminium addition influence. It was found that the despheroidizing influence of aluminium (up to about 2.8%) yields the crystallization of either the deformed nodular graphite precipitates or vermicular graphite precipitates. None of the examined specimens, however, contained the flake graphite precipitates. The results of examinations confirmed the already known opinion that aluminium widens the range of ferrite crystallization.
Źródło:
Archives of Foundry Engineering; 2013, 13, 3; 80-83
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Leading Role of Aluminium in the Growing Production of Castings Made of the Non-Ferrous Alloys
Autorzy:
Soiński, M. S.
Jakubus, A.
Powiązania:
https://bibliotekanauki.pl/articles/2079827.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
foundry production
non-ferrous alloys
aluminium alloys
produkcja odlewnicza
stopy metali nieżelaznych
stopy aluminium
Opis:
The paper presents changes in the production volume of castings made of non-ferrous alloys on the background of changes in total production of casting over the 2000-2019 period, both on a global scale and in Poland. It was found that the dynamics of increase in the production volume of castings made of non-ferrous alloys was distinctly greater than the dynamics of increase in the total production volume of castings over the considered period of time. Insofar as the share of production of the non-ferrous castings in the total production of castings was less than 16% during the first two years of the considered period, it reached the level of 20% in the last four years analysed. This share, when it comes to Poland, increased even to the greater degree; it grew from about 10% of domestic production of castings to over 33% within the regarded 2000-2019 period. The greatest average annual growth rate of production, both on a global scale and in Poland, was recorded for aluminium alloys as compared with other basic non-ferrous alloys. This growth rate for all the world was 4.08%, and for Poland 10.6% over the 2000-2019 period. The value of the average annual growth rate of the production of aluminium castings in Poland was close to the results achieved by China (12%), India (10.3%) and the South Korea (15.4%) over the same period of time. In 2019, the total production of castings in the world was equal to about 109 million tonnes, including over 21 million tonnes of castings made of non-ferrous alloys. The corresponding data with respect to Poland are about 1 million tonnes and about 350 thousand tonnes, respectively. In the same year, the production of castings made of aluminium alloys was equal to about 17.2 million tonnes in the world, and about 340 thousand tonnes in Poland.
Źródło:
Archives of Foundry Engineering; 2021, 21, 3; 33-42
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ dodatków organicznych oraz preparatu EM-A na właściwości fizyczne, chemiczne oraz na stan struktury poziomu orno-próchnicznego gleby uprawnej. Część I. Właściwości fizyczne i wodne
Impact of addition of organic additives and EM-A preparation on physical, chemical and structural state of the arable-humus soil horizon. Part I. Physical and water properties
Autorzy:
Kaczmarek, Z.
Gajewski, P.
Jakubus, M.
Owczarzak, W.
Mocek, A.
Powiązania:
https://bibliotekanauki.pl/articles/335112.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
właściwości fizyczne
obornik
słoma
mikroorganizmy efektywne
physical properties
manure
straw
effective microorganisms
Opis:
W pracy przedstawiono wyniki badań określające wpływ różnych dawek obornika, słomy oraz mikrobiologicznej szczepionki EM-A na wybrane właściwości fizyczne i wodne poziomu orno – próchnicznego uprawnej gleby mineralnej. Założono doświadczenie w kontrolowanych warunkach laboratoryjnych. Badano kombinacje z dwoma dawkami dodatku obornika i słomy. Testowano także wariant z dodatkową aplikacją szczepionki mikrobiologicznej efektywnych mikroorganizmów. W próbkach glebowych oznaczono następujące właściwości: skład granulometryczny, gęstość fazy stałej, wilgotność naturalną i higroskopową, maksymalną pojemność higroskopową, gęstość gleby, porowatość, współczynnik filtracji, pojemności wodne przy określonych potencjałach jej wiązania przez glebę. Stwierdzono, między innymi, że gęstość fazy stałej modyfikowana była jedynie przez ilość i jakość zastosowanych dodatków materii organicznej. Gęstość objętościowa najniższa była w materiale wyjściowym, a dodatek EM-A podnosił jej wartości. Najwyższą porowatość całkowitą uzyskano w próbce zerowej, a dodatek EM-A obniżał jej wartość. We wszystkich pozostałych kombinacjach udział efektywnych mikroorganizmów pogarszał właściwości wodno-powietrzne gleby. Wartości współczynnika filtracji malały wraz ze wzrostem udziału materii organicznej, a w poszczególnych wariantach dodatek EM-A wpływał na obniżenie się prędkości filtracji. Przebieg krzywych desorpcji wody był wyraźnie uzależniony od zastosowanych dawek obornika i słomy. Nie stwierdzono wpływu dodatku EMA na tę właściwość gleby. W świetle przeprowadzonych badań, jego stosowanie w podobnych wariantach wydaje się mało efektywne bądź wręcz nieuzasadnione.
The paper presents results of investigations whose aim was to determine the influence of different doses of farmyard manure, straw as well as EM-A microbiological vaccine on some selected physical and water properties of the arable-humic horizon of mineral soil. The experiment was established in controlled laboratory conditions. Combinations with two doses of farmyard manure and straw were investigated. Moreover, a combination with an additional microbiological vaccine application of effective microorganisms (EM) was also tested. The following properties were determined in the examined soil samples: texture, solid phase density, natural and hygroscopic moisture content, maximal hygroscopic capacity, soil density, porosity, filtration coefficient, water capacities at definite potentials of its binding by soil. It was found, among others that the solid phase density was modified only by the quantity and quality of the applied organic matter additives. Volumetric density was the lowest in the initial material and the addition of EM-A enhanced its value. The highest total porosity was obtained in the zero sample and the addition of EM-A reduced its value. In all the remaining combinations, the application of effective microorganisms deteriorated water-air conditions of the soil. Values of the filtration coefficient declined together with the increase in the proportions of organic matter and the addition of EM-A in individual combinations was found to reduce filtration velocity. Runs of water desorption curves depended very distinctly on the applied doses of farmyard manure and straw. The addition of EM-A preparation failed to affect this soil property. In the light of the obtained research results, its application in similar combinations appears to be not very effective or completely unjustified.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2013, 58, 3; 240-243
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ dodatków osadu i kompostu komunalnego oraz efektywnych mikroorganizmów na wybrane właściwości poziomu orno - próchnicznego gleby mineralnej. Część 1. Właściwości fizyczne i wodne
Impact of the addition of sewage sludge, communal compost and effective microorganisms on selected properties of the arable-humus level of mineral soil. Part 1. Physical and water properties
Autorzy:
Kaczmarek, Z.
Kruk, K.
Gajewski, P.
Jakubus, M.
Powiązania:
https://bibliotekanauki.pl/articles/335612.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
odpady komunalne
kompost
mikroorganizmy
gleby mineralne
poziom orno-próchniczy
badania
municipal waste
compost
micro-organisms
mineral soil
arable-carious level
experimentation
Opis:
W pracy przedstawiono wyniki badań określające wpływ różnych dawek kompostu i osadu komunalnego oraz mikrobiologicznej szczepionki EM-A na wybrane właściwości fizyczne i wodne poziomu orno - próchnicznego gleby płowej. Założono doświadczenie w kontrolowanych warunkach laboratoryjnych. Testowano kombinacje z dwoma dodatkami kompostu i osadu ściekowego, odpowiadającymi dawkom: agrotechnicznej oraz rekultywacyjnej. Dodatek EM-A zaaplikowano w ilości odpowiadającej opryskowi o wydatku 100 l/ha. Oznaczono następujące właściwości: skład granulometryczny, gęstość fazy stałej, wilgotność naturalną i higroskopową, maksymalną pojemność higroskopową, gęstość gleby, porowatość, współczynnik filtracji, pojemności wodne przy określonych potencjałach wiązania, porowatość drenażową. Stwierdzono - między innymi, że zmniejszenie się gęstości gleby i związany z tym wzrost porowatości całkowitej wystąpiły jedynie przy zastosowaniu wysokich (rekultywacyjnych) dawek kompostu i osadu, a dodatki EM-A nie powodowały takich zmian. Dodatek EM-A do gleby powodował znaczący wzrost jej wilgotności naturalnej, lecz nie wpływał na wzrost wartości tej właściwości przy zastosowaniu dodatków kompostu i osadu. Powodował on również wzrost wilgotności przy polowej pojemności wodnej w każdej kombinacji. Retencja użyteczna zwiększała się wyraźnie po dodaniu EM-A do próbki zerowej. W pozostałych przypadkach jej wielkości były zróżnicowane i nieregularne. Wszystkie zastosowane dodatki wpływały na znaczne obniżenie się współczynnika filtracji. Zastosowane dodatki - niezależnie od ich wysokości - wpływały na zmienność właściwości fizycznych i wodnych wyraźnie, lecz w niewielkim stopniu. W glebach nawożonych kompostami i osadami komunalnymi zastosowanie EM-A jako dodatkowego czynnika wydaje się więc być nieuzasadnione.
The paper presents results of investigations aiming at the determination of the effect of different doses of compost and communal sludge as well as EM-A microbiological inoculums on selected physical and water properties of the arable-humus level of grey-brown podzolic soil. The experiment was established in controlled laboratory conditions. The experimental design comprised treatments with two additions of compost and sewage sludge corresponding to agrotechnical and reclamation doses. The dose of the applied EM-A corresponded to spraying in the amount of 100 l/ha. The following properties were ascertained: texture, solid phase density, natural and hygroscopic moisture content, maximal hygroscopic capacity, soil density, porosity, filtration coefficient, water capacities at definite binding potentials and drainage porosity. It was found, among others, that soil density reduction and increased total porosity associated with it occurred only after the application of high (reclamation) doses of compost and sewage sludge and the addition of EM-A preparations failed to stimulate such changes. The addition of EM-A to soil resulted in a significant increase of its natural moisture content but it did not cause any increase in the value of this property when the soil was also supplemented with compost and sewage sludge. Furthermore, it led to increased moisture content at field water capacity in the case of each combination. Useful retention increased evidently after the addition of EM-A to the zero sample. In the remaining cases, its values varied and were irregular. All the applied additives reduced significantly the filtration coefficient. The applied additives - irrespective of the applied quantities - considerably affected variations in physical and water properties, although these variations were small. Therefore, the application of EM-A as an additional factor in soils fertilized with composts and communal sewage sludge does not seem justified.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2012, 57, 3; 186-189
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies