Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Jablonski, R." wg kryterium: Autor


Tytuł:
Indications for sexology consultation in women after surgical treatment due to breast cancer
Autorzy:
Streb, J.
Jabłonski, M.J.
Słowik, A.
Babczyk, D.
Jach, R.
Powiązania:
https://bibliotekanauki.pl/articles/2083232.pdf
Data publikacji:
2019
Wydawca:
Instytut Medycyny Wsi
Tematy:
mastectomy
sexual health
sexual dysfunction
desire
orgasm
Opis:
Introduction and objectives. Surgical treatment due to brest cancer have an impact on women sexuality. There is a need for research about effective indications for sexology consultation in women after such treatment. The aim of this study is to determine the indications for sexology consultation in women after surgical treatment for breast cancer. Materials and method. We tested 42 women patients diagnosed with breast cancer who had undergone mastectomy 3 months before the study. 3 months after the surgery the women were surveyed using the Polish version of FSFI assessing sexual functioning in women. The result of PL-FSFI were compared with the control group. Results. It was found that the mean score of PL-FSFI in the study group 3 months after the surgery was 13.33 points (score range: 1.2–31.7; median 8.3 points) with a statistically significant difference in terms of areas: desire, arousal, lubrication and orgasm in favour of the control group. The total score of PL-FSFI was significantly lower in women after mastectomy than in women after breast-conserving surgery. It has been shown that sexually active women in whom the surgery concerned the right breast (on the side of the dominant hand) scored lower on the scale “sexual functioning” of QLQ-BR-23 than women with surgery of the left breast, with this difference being statistically significant. There was a statistically significant correlation between the baseline performance status on the Zubrod scale and the scales: desire, lubrication and satisfaction of PL-FSFI. Living in a small town proved to be statistically significant for predicting a lower risk of sexual dysfunction among the surveyed women. Conclusions. The women who underwent surgery due to breast cancer had a higher risk of sexual dysfunction compared to the general population. Higher risk of sexual dysfunction especially concerns women after mastectomy, those who underwent breast surgery on the side of the dominant hand, and those with a worse preoperative overall level of functioning of ≥ 1 point on the Zubrod scale. A lower risk of disorders was observed in women living in smaller towns. The above factors indicate the advisability for sexology consultation in women with breast cancer.
Źródło:
Annals of Agricultural and Environmental Medicine; 2019, 26, 2; 379-384
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exchange coupling effects in naturally oxidised ultrathin iron film
Autorzy:
Dawczak-Dębicki, H.
Marczyńska, A.
Rogowska, A.
Wachowiak, M.
Nowicki, M.
Pacanowski, S.
Jabłoński, B.
Czajka, R.
Smardz, L.
Powiązania:
https://bibliotekanauki.pl/articles/1050673.pdf
Data publikacji:
2018-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.70.-i
75.70.Kw
Opis:
Oxidation process of Fe films under atmospheric conditions is depth limited such that an oxide covering layer with a well-defined thickness is formed by which the underlying metal is prevented from further oxidation. Iron thin film with an initial thickness d_{i}=4 nm was deposited onto 1.6 nm - V(110) buffer layer using UHV magnetron sputtering. The planar growth of Fe oxides was revealed by atomic force microscopy. X-ray photoelectron spectroscopy studies performed after 250 days of oxidation revealed formation of a hematite (α-Fe₂O₃) ultrathin film on the metallic rest of iron. Furthermore, low temperature magnetic measurements of the oxidised Fe ultrathin film revealed an exchange anisotropy which is imposed to the metallic rest. As a result, we have observed at low temperatures a shift and broadening of the hysteresis loops due to the exchange interaction at the metal-oxide interface.
Źródło:
Acta Physica Polonica A; 2018, 133, 3; 601-604
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Model-Based Design in algorithms’ prototyping for experimental acorn scarification rig
Zastosowanie metodyki projektowania opartej na modelu w prototypowaniu algorytmów dla badawczego stanowiska skaryfikacji żołędzi
Autorzy:
Przybyło, J.
Jabłoński, M.
Pociecha, D.
Tadeusiewicz, R.
Piłat, A.
Walczyk, J.
Kiełbasa, P.
Szczepaniak, J.
Adamczyk, F.
Powiązania:
https://bibliotekanauki.pl/articles/335729.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
scarification
acorn
Model-Based Design
control
skaryfikacja
żołędzie
projektowanie
model MBD
sterowanie
Opis:
Assessment of viability of oak seeds is mainly performed by mechanical scarification followed by visual assessment by trained employees. This procedure is slow and prone to human errors, thus automation of this process is desirable. Shortening the design of complex automation systems requires the use of modern methods, allowing for modeling and simulation of systems containing elements of mechanical, electrical and digital components. The article presents selected aspects of the design of control algorithms for the acorn scarification prototype. A virtual prototyping and Model-Based Design (MBD) approach have been used.
Jedną ze stosowanych metod badania zmian mumifikacyjnych nasion jest skaryfikacja mechaniczna, połączona ze wzrokową oceną żywotności nasion przez człowieka. Ręcznie wykonywana procedura jest powolna i podatna na błędy, dlatego też automatyzacja tego procesu jest pożądana. Skrócenie czasu projektowania złożonych systemów automatyki wymaga stosowania nowoczesnych metod, pozwalających na modelowanie i symulację systemów zawierających elementy zarówno mechaniczne, elektryczne, jak i podzespoły cyfrowe. W artykule zaprezentowano wybrane aspekty projektowania algorytmów sterujących stanowiska badawczego do skaryfikacji żołędzi. Do rozwoju stanowiska badawczego wykorzystano wirtualne prototypowanie oraz metodykę projektowania opartą na modelu (MBD - ang. Model-Based Design).
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2017, 62, 1; 166-170
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Automat wspomagający uzyskanie większej liczby sadzonek dębów
Autorzy:
Tadeusiewicz, R.
Jablonski, M.
Pilat, A.
Szczepaniak, J.
Adamczyk, F.
Frackowiak, P.
Tylek, P.
Walczyk, J.
Juliszewski, T.
Kielbasa, P.
Powiązania:
https://bibliotekanauki.pl/articles/852389.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Przyrodników im. Kopernika
Tematy:
drzewa lesne
dab
Quercus
nasiona
zoledzie
skaryfikacja
jakosc nasion
zywotnosc
rozmnazanie roslin
sadzonki
automat do skaryfikacji i oceny zoledzi
Źródło:
Wszechświat; 2017, 118, 07-09
0043-9592
Pojawia się w:
Wszechświat
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dopant-Based Charge Sensing Utilizing P-I-N Nanojunction
Autorzy:
Nowak, R.
Jabłoński, R.
Powiązania:
https://bibliotekanauki.pl/articles/220915.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
nanosensor
silicon
p-i-n junction
dopant
Kelvin Probe Force Microscope
Opis:
We studied lateral silicon p-i-n junctions, doped with phosphorus and boron, regarding charge sensing feasibility. In order to examine the detection capabilities and underlying mechanism, we used in a complementary way two measurement techniques. First, we employed a semiconductor parameter analyzer to measure I−V characteristics at a low temperature, for reverse and forward bias conditions. In both regimes, we systematically detected Random Telegraph Signal. Secondly, using a Low Temperature Kelvin Probe Force Microscope, we measured surface electronic potentials. Both p-i-n junction interfaces, p-i and i-n, were observed as regions of a dynamic behaviour, with characteristic time-dependent electronic potential fluctuations. Those fluctuations are due to single charge capture/emission events. We found analytically that the obtained data could be explained by a model of two-dimensional p-n junction and phosphorus-boron interaction at the edge of depletion region. The results of complementary measurements and analysis presented in this research, supported also by the previous reports, provide fundamental insight into the charge sensing mechanism utilizing emergence of individual dopants.
Źródło:
Metrology and Measurement Systems; 2017, 24, 2; 391-399
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evolution and selected implementation examples of ITS in the European Union
Autorzy:
Kozlowski, R.
Jablonski, J.
Adamek, R.
Powiązania:
https://bibliotekanauki.pl/articles/393944.pdf
Data publikacji:
2017
Wydawca:
Polskie Stowarzyszenie Telematyki Transportu
Tematy:
telecommunication
ITS
C-ITS
Intelligent Transportation Systems
telekomunikacja
inteligentny system transportowy
Opis:
Intelligent transportation systems (ITS) are evolving in response to a range of factors, which are discussed in this paper in conjunction with major directions of future ITS development. The technology of cooperation between the various elements of infrastructure and vehicles will determine further evolution of telematic solutions, leading to synergies arising from both existing and new applications, as well as from the advent of the Internet of things in transportation. The next step in the development of such systems is Cooperative ITS. It already has a solid foundation in the European Union’s strategic documents on transportation, and the first implementations are under way.
Źródło:
Archives of Transport System Telematics; 2017, 10, 3; 16-20
1899-8208
Pojawia się w:
Archives of Transport System Telematics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multirotor platform with sensory head for measurement of selected air parameters
Autorzy:
Jabłoński, K.
Czyba, R.
Grychowski, T.
Wiora, J.
Janik, M.
Łomnicka, N.
Galeja, M.
Powiązania:
https://bibliotekanauki.pl/articles/245005.pdf
Data publikacji:
2017
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
unmanned aerial vehicle
pollution measurement
on-line air monitoring
environmental monitoring
embedded gas sensing system
bezzałogowy statek powietrzny
pomiar zanieczyszczenia
monitoring powietrza on-line
monitoring środowiska
wbudowany system wykrywania gazu
Opis:
In this article, a project of an unmanned aerial system designed for monitoring of air pollution is presented. The system consists of an autonomous unmanned aerial vehicle (UAV) equipped with a measurement head with sensors of chemical and physical properties of atmospheric air, and a ground control station arranged to store and display the collected data. The head contains modern sensors selective to the most important components of air in view of environmental pollution. Measurement data are acquired locally as well as transmitted wirelessly to a ground station. The UAV can be programmed to a particular measurement missions. The ground station dispose of a software for flight control and for visualisation of measurement results on-line. In this paper, an architecture of the entire system, a data processing performing by each subsystem, and communication methods between them are presented. This paper also includes a specification of sensors with their principles of operation, description of their metrological properties and the way, in which they are implemented in the designed electrical circuits. Results of preliminary tests in a laboratory and in a field, during a short flight, are also presented.
Źródło:
Journal of KONES; 2017, 24, 1; 179-187
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Natural xidation of thin Fe films on V buffer layer
Autorzy:
Dawczak-Dębicki, H.
Marczyńska, A.
Rogowska, A.
Wachowiak, M.
Nowicki, M.
Pacanowski, S.
Jabłoński, B.
Kowalski, W.
Grembowski, J.
Czajka, R.
Smardz, L.
Powiązania:
https://bibliotekanauki.pl/articles/1055062.pdf
Data publikacji:
2017-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
75.70.-i
68.55.-a
Opis:
We have studied oxidation kinetics of Fe thin film under atmospheric conditions using the fact that metallic iron is a ferromagnet but ultrathin natural iron oxides are approximately nonmagnetic at room temperature. As a consequence, oxidation is associated with a loss in total Fe magnetic moment. Results show that the sample with an initial Fe thickness equal to 10 nm oxidize relatively fast (time constant τ=0.05 day), whereby a constant amount of 2.5 nm of metal is transformed into oxides. For lower iron initial thickness (d_{i}=4 nm) the time constant for oxidation significantly increases reaching a value of 2 days. Furthermore, X-ray photoelectron spectroscopy studies performed after 144 days of oxidation revealed formation of hematite (α-Fe₂O₃) thin film on the metallic rest of iron.
Źródło:
Acta Physica Polonica A; 2017, 132, 4; 1272-1276
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sterowanie napędem zespołu chwytno-pozycjonującego w automacie skaryfikującym nasiona dębu
Autorzy:
Tadeusiewicz, R.
Klocek, J.
Piłat, A.
Jabłoński, M.
Tylek, P.
Walczyk, J.
Adamczyk, F.
Szaroleta, M.
Powiązania:
https://bibliotekanauki.pl/articles/305017.pdf
Data publikacji:
2017
Wydawca:
Wydawnictwo Druk-Art
Tematy:
urządzenie chwytno-pozycjonujące
sterowanie napędem
nasiona dębu
gripping and positioning device
drive control
oak seeds
Opis:
W artykule opisano strukturę i zasadę działania układu sterowania i napędu dla zespołu chwytno-pozycjonującego, będącego częścią automatu przeznaczonego do skaryfikacji i oceny zdrowotności żołędzi. Urządzenie to, zaprojektowane wspólnie przez specjalistów z Uniwersytetu Rolniczego w Krakowie oraz inżynierów z AGH z Krakowa, PIMR z Poznania i zbudowane przez pracowników dwóch firm: OPTISTER z Krakowa i PROMAR z Poznania, ma za zadanie zwiększyć liczbę uzyskiwanych sadzonek dębów poprzez eliminację nasion nierokujących nadziei na to, że z nich wyrosną potrzebne sadzonki. Opis celu i zasady działania automatu był przedmiotem innych prac, cytowanych w wykazie literatury, natomiast w niniejszej pracy opisano wspomniany wyżej szczegółowy fragment rozważanej konstrukcji, a mianowicie układ sterowania i napędu dla zespołu chwytno-pozycjonującego. Prezentowane rozwiązanie zawiera interesujące nowatorskie rozwiązania konstrukcyjne, może więc zainteresować czytelników zajmujących się budową urządzeń chwytno-pozycjonujących o podobnym lub innym przeznaczeniu.
In paper the new gripping-positioning unit driver control in an automaton scarifying oak seeds is described and discussed. Such automaton was designed by specialists form Agricultural University in Krakow with engineers from AGH University of Science and Technology in Krakow and PIMR in Poznan. Discussed in presented paper part of scarifying automaton (the gripping-positioning unit with drivers and automatic control) was built in two factories: OPTISTER from Krakow and PROMAR from Poznan. Whole automaton is dedicated for increasing number of oak seeds by means of eliminating form sowing process acorns which are damaged in any form. This automatic selection can be very effective and fast, in contrast to manual processing performed up to day. The whole description of design and construction of considered automatom was given in previous publications by authors, listed in bibliography.
Źródło:
Napędy i Sterowanie; 2017, 19, 11; 82-87
1507-7764
Pojawia się w:
Napędy i Sterowanie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of Harris detector for determination of orientation of acorns in the process of automated scarification
Zastosowanie detektora Harrisa do określania orientacji żołędzi w procesie zautomatyzowanej skaryfikacji
Autorzy:
Pawlik, P.
Jabłoński, M.
Bubliński, Z.
Tadeusiewicz, R.
Walczyk, J.
Tylek, P.
Juliszewski, T.
Adamczyk, F.
Powiązania:
https://bibliotekanauki.pl/articles/337417.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
image analysis
image recognition
characteristic points
corner detector
acorn
scarification
analiza obrazów
rozpoznawanie obrazów
punkty charakterystyczne
detekcja narożników
skaryfikacja
żołędzie
Opis:
The article proposes an algorithm for detection of orientation of acorns during scarification process. This task is necessary for proper cut off of a part of acorn. Described algorithm uses Harris corner detector for location of acorn's remain of style. The performed tests have shown that proposed method is characterized by a sufficient sensitivity value as a unit of efficiency. Its specificity and precision are also high.
W artykule przedstawiono propozycję algorytmu detekcji orientacji żołędzi w procesie automatycznej skaryfikacji żołędzi. Określenie orientacji jest konieczne w celu właściwego wykonania odcięcia części nasiona. Opisany algorytm wykorzystuje detektor Harrisa do wykrywania korzenia zarodkowego. Przeprowadzone testy pokazały, że metoda cechuje się wystarczającą wartością czułości jako miary wydajności. Specyficzność oraz precyzja również są wysokie.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2017, 62, 1; 163-165
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of atomic force microscopy for studies of fractal and functional properties of biomaterials
Autorzy:
Kulesza, S.
Bramowicz, M.
Czaja, P.
Jabłoński, R.
Kropiwnicki, J.
Charkiewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/1075857.pdf
Data publikacji:
2016-10
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
06.30.Bp
68.37.Ps
68.35.bd
81.05.Bx
87.85.J-
Opis:
The paper presents results of numerical analysis of AFM images of a surface of sandblasted Ti6Al7Nb alloys before and after wet etching procedure usually used for preparing commercially viable dental implants. Obtained results demonstrate that etching procedure efficiently cleans the implants as it leaves almost pure Ti-Al-Nb surface with trace amounts of alkali metals and increased hydrophobicity. Apart of that, it turned out that simple statistical measures of the height variations (root mean square roughness) only slightly change upon the treatment procedure, especially for scan lengths below 20 μm. On the other hand, correlation analysis exhibits bifractal surface patterns composed of regular residues left on otherwise helical ridges of the base material. Etching leaves its fingerprint in fractal dimension, but not in the corner frequency.
Źródło:
Acta Physica Polonica A; 2016, 130, 4; 1013-1015
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New Approach to the Designing of Curtains – Decorative Multilayer Woven Structures
Nowe spojrzenie na projektowanie dekoracyjnych tkanin zasłonowych
Autorzy:
Szkudlarek, J.
Snycerski, M.
Kubiak, R.
Rutkowska, A.
Taranek, D.
Jabłoński, M.
Chojnacki, D.
Zimna, K.
Powiązania:
https://bibliotekanauki.pl/articles/232574.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
curtains
multilayer fabrics
woven structures
geometry of fabric’s structure
weaving structural modules
clearances
computer image analysis
zasłony
tkaniny wielowarstwowe
geometria struktury tkaniny
komputerowa analiza obrazu
Opis:
Special conditions of applying curtain fabrics, i.e. vertical hanging and lightening with transmitted light, require a different approach to designing. It was found that weaving patterns can significantly affect the continuity of the structure, particularly in the pattern area. In such cases, the effect of patterning may be disturbed by the light transmitted through uncontrolled clearances of a fabric. The study identifies the need to modify the structure, based on basic knowledge of the geometry of a fabric’s structure. A repair system aided by an original computer program was developed on such a basis. The method was validated for structures with a stratified system of thread that were produced with a Picanol rapier loom. For the purposes of results presentation, ImageJ software for computer image analysis was used.
Specjalne warunki stosowania tkanin zasłonowych, tj. pionowe zawieszenie, w oświetleniu światłem przechodzącym wymagają innego podejścia do projektowania. Stwierdzono, że wzorowanie splotowe może znacząco wpływać na ciągłość struktury, szczególnie w miejscach wzoru. W takich przypadkach efekt wzorowania może być zakłócony światłem przechodzącym przez niekontrolowane prześwity tkaniny. W pracy zidentyfikowano potrzebę modyfikacji struktury w oparciu o podstawową wiedzę z zakresu geometrii struktury tkaniny. Na jej podstawie opracowano system naprawczy wspomagany autorskim programem komputerowym. Walidację metody prowadzono na strukturach z nawarstwionym układem wątku, wykonanych na krośnie rapierowym Picanol. Do celów prezentacji wyników użyto program ImageJ do komputerowej analizy obrazu.
Źródło:
Fibres & Textiles in Eastern Europe; 2016, 6 (120); 94-98
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The launching phase analysis of the implementation of Polish largest intelligent transportation system
Autorzy:
Kozłowski, R.
Palczewska, A.
Jabłoński, J.
Powiązania:
https://bibliotekanauki.pl/articles/393229.pdf
Data publikacji:
2016
Wydawca:
Polskie Stowarzyszenie Telematyki Transportu
Tematy:
intelligent transportation system
implementation process
advanced technologies
inteligentny system transportowy
proces wdrażania
zaawansowane technologie
Opis:
The implementation of ITS is carried out with the use of standard project management tools. Therefore, it includes certain phases. One of the most difficult and risky phase of ITS implementation is launching of such projects. An important factor causing this difficulty is the fact that launching is being done on „living organism”. Thus it has to be time-consuming mostly due to the necessity of a proper real-time city traffic data collection. Additional factors are occurring failures (eg. the tram network or traffic lights system) or accidents. Another problem are social expectations, which does not take into account the specifics of ITS implementation. The citizens expect immediate results. The aim of people responsible for the launching phase of such systems is to ensure smooth operation of all its components and to provide local community with information on a relatively long system activation to its full operation. This article presents the analysis of the launching phase of the biggest ITS in Poland.
Źródło:
Archives of Transport System Telematics; 2016, 9, 2; 26-30
1899-8208
Pojawia się w:
Archives of Transport System Telematics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The role of fungus Beauveria bassiana in reducing the number of Pissodes castaneus (Col., Curculionidae) in young forests
Autorzy:
Skrzecz, I.
Popowska-Nowak, E.
Wolski, R.
Sowinska, A.
Jablonski, T.
Pezowicz, E.
Tumialis, D.
Przewloka, I.
Powiązania:
https://bibliotekanauki.pl/articles/38748.pdf
Data publikacji:
2016
Wydawca:
Instytut Badawczy Leśnictwa
Źródło:
Folia Forestalia Polonica. Series A . Forestry; 2016, 58, 4
0071-6677
Pojawia się w:
Folia Forestalia Polonica. Series A . Forestry
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System nowej generacji elementów połączeń nośnych kolejowej górnej sieci trakcyjnej
New generation of railway overhead line equipment system
Autorzy:
Knych, T.
Kwaśniewski, P.
Kisielewicz, G.
Mamala, A.
Ściężor, W.
Jabłoński, M.
Kowal, R.
Gaś, P.
Bogacki, A.
Greguła, R.
Błędowski, L.
Majewski, W.
Rojek, A.
Powiązania:
https://bibliotekanauki.pl/articles/250721.pdf
Data publikacji:
2015
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
sieć trakcyjna
podwieszenie
bezpieczeństwo
traction network
hanger
security
Opis:
W artykule zaprezentowano system podwieszań sieci trakcyjnej nowej generacji. Dla zaprojektowanego rozwiązania przedstawiono wyniki obliczeń numerycznych rozkładu naprężeń, a także współczynnika bezpieczeństwa w warunkach statycznych obciążeń eksploatacyjnych. Przeprowadzone badania potwierdziły, że opracowane elementy są bezpieczne z punktu widzenia nośności konstrukcji w warunkach obciążeń eksploatacyjnych.
Railway overhead line equipment is being produced in Poland based on the withdrawn industry standards and because of that those elements do not meet requirements of actual technical requirements. Design of currently used constructions is based on hot galvanized, commercially available simple shapes like channel and square sections made from S235JR grade steel. Because of that those elements have typically high mass and limited corrosion resistance. What is more outdated design present difficulties with assembly and daily use. Within this article concept of new generation of overhead line equipment is presented along with numerical (FEM) research results of stress and safety factor obtained with the use of applied operational load scheme. Conducted works showed that newly designed elements have safe level of effective stress and high safety factor - all tested under operational load scheme, existing in 3 kV DC railway systems.
Źródło:
TTS Technika Transportu Szynowego; 2015, 1-2; 57-60
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies