Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Gupta, P." wg kryterium: Autor


Tytuł:
Analysis and settlement evaluation of an end-bearing granular pile with non-linear deformation modulus
Autorzy:
Sharma, J. K.
Gupta, P.
Powiązania:
https://bibliotekanauki.pl/articles/178917.pdf
Data publikacji:
2018
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
end-bearing granular pile
relative stiffness
bearing stratum
granular pile
deformation modulus
settlement influence factor
Opis:
Ground improvement with granular piles increases the load-carrying capacity, reduces the settlement of foundations built on the reinforced ground and is also a good alternative to concrete pile. Granular piles or stone columns are composed of granular material, such as crushed stone or coarse dense sand. An analytical approach based on the continuum approach is presented for the non-linear behaviour of the granular pile. The formulation for pile element displacement is done considering the non-homogeneity of the granular pile as it reflects the true behaviour and also accounts for the changes in the state of the granular pile due to installation, stiffening and improvement effects. The present study shows that the settlement influence factor for an endbearing granular pile decreases with increase in the relative stiffness of the bearing stratum. The settlement influence factor decreases with increase in linear and non-linear non-homogeneity parameters for all values of relative length. For a shorter pile, the rate of decrease of the settlement influence factor is greater in comparison to that for a longer pile. Shear stress at the soil-granular pile interface reduces in the upper compressible portion of the granular pile and increases in the lower stiffer portion of the granular pile due to the non-homogeneity of an endbearing granular pile.
Źródło:
Studia Geotechnica et Mechanica; 2018, 40, 3; 188-201
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Antioxidant and anti-candida activity of selected medicinal plants of Indian origin
Autorzy:
Prajapati, S.
Bhardwaj, A.
Gupta, P.
Powiązania:
https://bibliotekanauki.pl/articles/2049066.pdf
Data publikacji:
2020
Wydawca:
Instytut Włókien Naturalnych i Roślin Zielarskich
Tematy:
fungal disease
antioxidant
medicinal plant
antifungal activity
Candida albicans
plant extract
Terminalia chebula
Thuja occidentalis
Syzygium jambolanum
przeciwutleniacze
medycyna tradycyjna
działanie przeciwgrzybicze
wyciąg roślinny
rośliny lecznicze
Opis:
Introduction: Fungal disseases are the most common opportunistic infection. Objective: The main aims of the study were to determine phenolic content and to evaluate the antioxidant and anti-candida activity of the selected Indian-origin plant extracts from the fruit pulp, stem, leaves, and seeds of three plants of Indian origin. Material and methods: The extracts from Terminalia chebula, Thuja occidentalic and Syzygium jambolanum were investigated. The total phenolic content, antioxidant potential of different crude extracts was accessed using the free radical, 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2’-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS). Anti-candida activity was evaluated using disk diffusion method and broth dilution assay against Candida albicans. Results: Ethanol and methanol extracts of Indian traditional plants possessed high radical scavenging activity: T. chebula 29.38±0.15, T. occidentalis 6.26±0.24 and S. jambolanum 25.64±0.18 at 0.32 mg/ml. The extracts exhibited good zones of inhibition diameters ranged between: for T. chebula 6.33±0.57 mm and 19.66±1.52 mm in diameter, S. jambolanum 7.00±00 mm and 23.33±1.52 and T. occidentalis 7.66±0.57 and 17.00±1.00 mm. C. albicans were susceptible to all three tested extract at different concentrations. The lowest MIC 1.95 mg/ml was recorded with S. jambolanum while the T. chebula and T. occidentalis inhibited the growth at 3.90 mg/ml, respectively, against the C. albicans. Conclusion: The study result paves an overall view on the bioactivities of three traditional Indian medicinal plants crude extracts.
Źródło:
Herba Polonica; 2020, 66, 3; 1-12
0018-0599
Pojawia się w:
Herba Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Unsteady convection flow of a magnetomicropolar fluid past a vertical porous plate
Autorzy:
Jain, N. C.
Gupta, P.
Sharma, B.
Powiązania:
https://bibliotekanauki.pl/articles/266073.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
źródło ciepła
pole magnetyczne
materiały porowate
prędkość poślizgu
heat source/sink
magnetic field
porous medium
slip velocity
unsteady
vertical plate
Opis:
The paper deals with an unsteady two dimensional laminar slip flow of a viscous incompressible magnetomicropolar fluid past a semi infinite porous plate embedded in a porous medium. The flow is under the influence of a transverse magnetic field and heat source/sink. The free stream velocity follows an exponentially increasing or decreasing small perturbation law. The porous surface absorbs the fluid with time varying suction velocity. Expressions are obtained for velocity and temperature fields, mean angular velocity, skin friction and the Nusselt number.
Źródło:
International Journal of Applied Mechanics and Engineering; 2013, 18, 1; 43-53
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Non-adiabatic universe and the redshift
Autorzy:
Gupta, Rajendra P.
Powiązania:
https://bibliotekanauki.pl/articles/1163142.pdf
Data publikacji:
2018
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Cosmic microwave background radiation
Cosmological constant
Cosmology theory
Distance scale
Distances and redshifts
Galaxies
General relativity
Hubble constant
Supernovae
Opis:
We have relaxed the constraint of adiabatic universe used in most cosmological models and shown that the new approach provides a better fit to the supernovae Ia redshift data with a single parameter, the Hubble constant, than the standard ΛCDM model with two parameters, the Hubble constant and the cosmological constant. The new approach, developed within the confines of the cosmological principle, yields the Hubble constant value 69.01 (±0.53) km s-1 Mpc-1. The cosmological constant may thus be considered as a manifestation of a non-adiabatic universe that is treated as an adiabatic universe.
Źródło:
World Scientific News; 2018, 110; 210-218
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of photoperiods on the growth performance of juvenile Trichogaster lalius (Hamilton, 1822)
Autorzy:
Awasthi, M.
Gupta, P.
Bano, F.
Serajuddin, M.
Powiązania:
https://bibliotekanauki.pl/articles/11469.pdf
Data publikacji:
2017
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Źródło:
International Letters of Natural Sciences; 2017, 65
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of periphery fixity on ballistic limit of thin aluminum plate subjected to blunt and ogival projectile impact
Autorzy:
Tiwari, G.
Iqbal, M. A.
Gupta, P. K.
Powiązania:
https://bibliotekanauki.pl/articles/955195.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
symulacja numeryczna
metoda elementów skończonych
aluminium
periphery fixity
blunt nosed projectile
ABAQUS
Opis:
Three-dimensional numerical simulations were carried out with the ABAQUS/explicit finite element code to study the influence of target boundary conditions on its ballistic limit. 1mm thick 1100-H12 aluminum target of 255 mm span diameter was hit by 19 mm diameter and 50.8 mm length blunt nosed projectile. The mass of the projectile was kept as 52.5 gm. The boundary condition effects on the ballistic limit were investigated by varying the target periphery boundary condition as fully clamped and partially clamped target (75%, 50% and 25%) subjected to projectile impact. The energy absorption and ballistic limit of the target was found to be significantly affected by the boundary conditions. Some of the finite element analysis results were compared with experimental and numerical results reported in international literature and a good agreement between the two was found.
Źródło:
International Journal of Applied Mechanics and Engineering; 2014, 19, 2; 379-395
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Perception of dental practitioners regarding the use of antioxidants in oral health
Autorzy:
Randhawa, R.K.
Gupta, N.
Bansal, M.
Arora, V.
Gupta, P.
Thakar, S.
Powiązania:
https://bibliotekanauki.pl/articles/875829.pdf
Data publikacji:
2016
Wydawca:
Narodowy Instytut Zdrowia Publicznego. Państwowy Zakład Higieny
Tematy:
perception
dental health
antioxidant
free radical
mouth cancer
oral health
Opis:
Background. Free radicals play a key role in the development of several pathological conditions. Therefore, antioxidants (AOs) are the first line of defense against free radical damage and are critical for maintaining optimum health and wellbeing. Objectives: To assess the perception of dental practitioners regarding use of antioxidants in oral health. Method. A cross-sectional questionnaire study was conducted among 296 dental practitioners in Tricity (Chandigarh, Mohali, Panchkula, India). A self-structured close-ended questionnaire was used to assess the perception of dentists regarding the use of antioxidants in their patients. It consisted of 12 questions with dichotomous response and five point likert scale ranging from strongly agree to strongly disagree. Descriptive statistics were used to summarize the data, followed by the Chi-square test to check significant differences between the responses. Correlation between responses were analysed through the Spearman’s rank correlation. Statistical analysis was done using Statistical Package for Social Sciences version 20 (Illinois, Chicago, USA). Results. A statistically significant difference was observed between genders, with females 181 (61%) having more knowledge than males 115 (39%) regarding the use of antioxidants in their clinical practice. It has been found that dental professionals in academics prescribes more antioxidants to their patients than the private practitioners. Postgraduates 76 (77.6%) had a higher level of knowledge than graduates 86 (43%). Conclusions. Knowledge about antioxidants should be highlighted in the health sciences curriculum. It is recommended to expand the use of antioxidants in oral health to bring down the burden of chronic diseases like periodontitis and catastrophic diseases like precancerous lesions and oral cancer.
Źródło:
Roczniki Państwowego Zakładu Higieny; 2016, 67, 3
0035-7715
Pojawia się w:
Roczniki Państwowego Zakładu Higieny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Association of occupational stress factors on nicotine dependence among patients visiting dental care unit of Indo-Tibetian border police force station in India
Autorzy:
Sandhu, Karandeep Singh
Arora, Vikram
Gupta, N.
Gupta, P.
Raja, Mitali
Mehta, Nishant
Powiązania:
https://bibliotekanauki.pl/articles/875894.pdf
Data publikacji:
2016
Wydawca:
Narodowy Instytut Zdrowia Publicznego. Państwowy Zakład Higieny
Tematy:
occupational stress
stress factor
nicotine
dependence
patient
smoking
India
Opis:
Background. Tobacco use is the foremost preventable cause of death and disease in the world today and work strain might be related with nicotine dependence by its provoking effect. Objective. To assess the association between occupational stress and nicotine dependence. Material and methods. A cross sectional survey was conducted among 200 subjects visiting a satellite dental clinic of Swami Devi Dyal Hospital and Dental College, Barwala, Panchkula, India. Nicotine dependence was measured using the Fagerstrom Test for Nicotine Dependence (FTND). The extent of the stress factors experienced at work was assessed using the Effort-Reward Imbalance scale (ERI). Chi-square test and multiple logistic regression analysis were employed for statistical analysis. Confidence level and level of significance were set at 95% and 5% respectively. Results. The results of bivariate analysis revealed association of occupational stress with age, marital status, educational status, level of nicotine dependence, frequency of cigarette smoking and religious attendance. However, multivariate analysis elicited the significant association of occupational stress with only two variables, level of nicotine dependence and frequency of smoking. Conclusion. Occupational stress was found to be associated with nicotine dependence in the present study implying a need of other tranquil measures to be incorporated for the relief of work related stress.
Źródło:
Roczniki Państwowego Zakładu Higieny; 2016, 67, 1
0035-7715
Pojawia się w:
Roczniki Państwowego Zakładu Higieny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A saturation theorem for combinations of Bernstein-Durrmeyer polynomials
Autorzy:
Agrawal, P.
Gupta, Vijay
Powiązania:
https://bibliotekanauki.pl/articles/1312031.pdf
Data publikacji:
1992
Wydawca:
Polska Akademia Nauk. Instytut Matematyczny PAN
Tematy:
linear combinations
compact support
inner product
Opis:
We prove a local saturation theorem in ordinary approximation for combinations of Durrmeyer's integral modification of Bernstein polynomials.
Źródło:
Annales Polonici Mathematici; 1992, 57, 2; 157-164
0066-2216
Pojawia się w:
Annales Polonici Mathematici
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Deep neural network and ANN ensemble for slope stability prediction
Autorzy:
Gupta, A.
Aggarwal, Y.
Aggarwal, P.
Powiązania:
https://bibliotekanauki.pl/articles/24200566.pdf
Data publikacji:
2022
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
upper clay
lower clay
peat
angle of internal friction
embankment
factor of safety
slope stability
deep neural network
ensemble
glina górna
glina dolna
torf
kąt tarcia wewnętrznego
nasyp
współczynnik bezpieczeństwa
stabilność zbocza
głęboka sieć neuronowa
zespół
Opis:
Purpose: Application of deep neural networks (DNN) and ensemble of ANN with bagging for estimating of factor of safety (FOS) of soil stability with a comparative performance analysis done for all techniques. Design/methodology/approach: 1000 cases with different geotechnical and similar Geometrical properties were collected and analysed using the Limit Equilibrium based Morgenstern-Price Method with input variables as the strength parameters of the soil layers, i.e., Su (Upper Clay), Su (Lower Clay), Su (Peat), angle of internal friction (φ), Su (Embankment) with the factor of safety (FOS) as output. The evaluation and comparison of the performance of predicted models with cross-validation having ten folds were made based on correlation-coefficient (CC), Nash-Sutcliffe-model efficiency-coefficient (NSE), root-mean-square-error (RMSE), mean-absolute-error (MAE) and scattering-index (S.I.). Sensitivity analysis was conducted for the effects of input variables on FOS of soil stability based on their importance. Findings: The results showed that these techniques have great capability and reflect that the proposed model by DNN can enhance performance of the model, surpassing ensemble in prediction. The Sensitivity analysis outcome demonstrated that Su (Lower Clay) significantly affected the factor of safety (FOS), trailed by Su (Peat). Research limitations/implications: This paper sets sight on use of deep neural network (DNN) and ensemble of ANN with bagging for estimating of factor of safety (FOS) of soil stability. The current approach helps to understand the tangled relationship of various inputs to estimate the factor of safety of soil stability using DNN and ensemble of ANN with bagging. Practical implications: A dependable prediction tool is provided, which suggests that model can help scientists and engineers optimise FOS of soil stability. Originality/value: Recently, DNN and ensemble of ANN with bagging have been used in various civil engineering problems as reported by several studies and has also been observed to be outperforming the current prevalent modelling techniques. DNN can signify extremely changing and intricate high-dimensional functions in correlation to conventional neural networks. But on a detailed literature review, the application of these techniques to estimate factor of safety of soil stability has not been observed.
Źródło:
Archives of Materials Science and Engineering; 2022, 116, 1; 14--27
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Performance evaluation of bucket based excavating, loading and transport (BELT) equipment – an OEE approach
Ocena działania systemu złożonego z urządzeń do urabiania, załadunku oraz transportu – podejście oparte o całościową ocenę efektywności
Autorzy:
Mohammadi, M.
Rai, P.
Gupta, S.
Powiązania:
https://bibliotekanauki.pl/articles/218889.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
całościowa ocena efektywności
pomiar wydajności
wykorzystanie sprzętu
tempo prac
ładowność
sprzęt górniczy
OEE
performance measurement
availability
utilization
speed factor
bucket capacity
mining equipment
Opis:
Overall Equipment Effectiveness (OEE) has been used since last over two decades as a measure of performance in manufacturing industries. Unfortunately, enough, application of OEE in mining and excavation industry has not been duly adopted. In this paper an effort has been made to identify the OEE for performance evaluation of Bucket based Excavating, Loading and Transport (BELT) equipment. The conceptual model of OEE, as used in the manufacturing industries, has been revised to adapt to the BELT equipment. The revised and adapted model considered the operational time, speed and bucket capacity utilization losses as the key OEE components for evaluating the performance of BELT equipment. To illustrate the efficacy of the devised model on real-time basis, a case study was undertaken on the biggest single bucket excavating equipment – the dragline, in a large surface coal mine. One-year data was collected in order to evaluate the proposed OEE model.
Podejście oparte o całościową ocenę efektywności używane jest od ponad dwóch dekad w analizach skuteczności działania urządzeń w przemyśle wytwórczym. Niestety podejście to nie zostało szeroko przyjęte w przemyśle górniczym. W pracy tej podjęto próbę dokonania całościowej oceny efektywności pracy układu złożonego ze sprzętu do urabiania, załadunku (koparki) oraz transportu. Model koncepcyjny podejścia całościowej oceny stosowany dotychczas w przemyśle wytwórczym został zaadaptowany by uwzględniać specyfikę systemów urabiania, ładowania i transportu. Odpowiednio zmodyfikowany model uwzględnia czas pracy układu, tempo pracy, spadek ładowności koparki i spowodowane w ten sposób straty, umożliwiając dokonanie całościowej oceny wydajności pracy systemu. Poprawność opracowanego modelu działającego w czasie rzeczywistym zbadano na przykładzie systemu do urabiania, załadunku i transportu wykorzystywanego w dużej kopalni odkrywkowej węgla. Do oceny poprawności modelu wykorzystano zebrane dane obejmujące cały rok pracy urządzeń.
Źródło:
Archives of Mining Sciences; 2017, 62, 1; 105-120
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of through transmission laser welding of Nylon6 by finite element simulation
Autorzy:
Gupta, S. K.
Pal, P. K.
Powiązania:
https://bibliotekanauki.pl/articles/407048.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
laser transmission welding
simulation
through transmission laser welding
glass transition temperature
finite element method
Opis:
Over the years laser welding has evolved as a fabrication process capable of overcoming the limitations of conventional joining methodologies. It facilitates the welding of diverse range of materials like metals, non-metals, polymers etc. Laser transmission welding is a technique employed for fabricating intricate shapes/contours in polymers with better precision compared to the other conventional processes. Nylon6, a synthetic semi-crystalline polymer is utilized as an engineering thermoplastic due to its high strength and temperature resistant properties. In the earlier researches, various welding techniques were employed for the fabrication of polymers and metals keeping the laser beam stagnant, and much emphasis was given only to temperature distribution along the different axes and limited attention was given to residual stress analysis. Therefore, in this research work, a three-dimensional time-dependent model using a moving laser beam is used to fabricate unreinforced Nylon6 specimens.
Źródło:
Management and Production Engineering Review; 2018, 9, 4; 56-69
2080-8208
2082-1344
Pojawia się w:
Management and Production Engineering Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical properties evaluation of banana fibre reinforced polymer composites: a review
Autorzy:
Gairola, Surya P.
Tyagi, Yogesh
Gupta, Nitin
Powiązania:
https://bibliotekanauki.pl/articles/2142873.pdf
Data publikacji:
2022
Wydawca:
Centrum Badań i Innowacji Pro-Akademia
Tematy:
banana fibers
epoxy
mechanical testing
composite material
natural fiber
błonnik bananowy
żywica epoksydowa
testy mechaniczne
materiał kompozytowy
włókno naturalne
Opis:
In today's fast-developing world, the use of composite materials is closely related to environmental pollution, renewable and biodegradable resources. A researcher is looking for environmentally friendly materials. Natural and synthetic fibres come in a wide range of shapes and sizes. Natural fibres include jute, straw wheat, rice husk banana fibre, pineapple leaf fibre, cotton, Sisal, Coir, Oats, and Bagasse. Every year, 13.5 tonnes of banana fibre are produced in India. Teabags, paper, and polymer composite reinforcement are just a few of the applications for banana fibre. This article focuses on the manufacture of banana fibre with epoxy and a variety of other natural fibres. By combining banana fibre with some current technology, waste will be reduced, and energy efficiency will be increased, all while supporting sustainability. Banana fibres are covered in this work, along with their uses, applications, and mechanical qualities, as well as how banana fibre might improve mechanical properties.
Źródło:
Acta Innovations; 2022, 42; 59-70
2300-5599
Pojawia się w:
Acta Innovations
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exploring computational protein fishing (CPF) to identify argonaute proteins from sequenced crop genomes
Autorzy:
Basu, P.
Ganguli, S.
Gupta, S.
Datta, A.
Powiązania:
https://bibliotekanauki.pl/articles/11424.pdf
Data publikacji:
2015
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
protein
argonaute
RNA interference
Arabidopsis
Oryza
crop plant
plant genome
Opis:
Plant RNA interference has been a very well studied phenomenon since its discovery. We are well versed with the types of small noncoding RNAs that are prevalent in the plant systems and their pathways of biogenesis and subsequent actions. However, apart from model plant systems such as Arabidopsis and Oryza, very little information is available regarding the other members of the RNA interference machinery; specially Argonaute proteins which acts as the major stabilizing factor for execution of the interference. This work focuses on the exploration of the sequenced crop genomes available on the web using a hybrid approach of computational protein fishing and genome mining. The results indicate that this hybrid approach was successful in the identification of argonaute proteins in the crop genomes under study.
Źródło:
International Letters of Natural Sciences; 2015, 06
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structural analyses of AC4 protein of Sri Lankan cassava mosaic virus
Autorzy:
Gupta, S.
Ganguli, S.
Basu, P.
Datta, A.
Powiązania:
https://bibliotekanauki.pl/articles/11568.pdf
Data publikacji:
2015
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
structural analysis
AC4 protein
cassava mosaic virus
RNA silencing
viral infection
viral suppressor
geminivirus
post transcriptional gene silencing
Opis:
RNA silencing is one of the important phenomenon in plant defense mechanism, it actively protect host plants against viral infections. Existing viruses must have developed counter defense strategies to survive this arms race. Such counter defense strategy is the viral silencing suppressor (VSRs) which have been reported to directly interfere with the various steps leading to the interference of viral RNAs. Most identified VSRs are multifunctional, besides being RNA-silencing suppressors, they often perform essential roles by functioning as coat proteins, helper components for viral transmission, replicases and movement proteins, proteases or transcriptional regulators. One such identified VSR is AC4 of Sri Lankan cassava mosaic virus strain. Trivial knowledge about the structure –function relationship of this VSR leads to this work, where we focus on the structure generation by modelling to identify the mode of interactions with the various effector molecules of the silencing pathways. Structural analyses have been performed to screen interacting residues. Results indicate conserved structural features which signify propensity of functional interactions and further shows that this VSR can be a potent tool for the analysis of RNA silencing mechanisms and the relationships between different silencing pathways and VSRs.
Źródło:
International Letters of Natural Sciences; 2015, 06
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Text mining approach to analyse the relation between obesity and breast cancer data
Autorzy:
Kumar, A.
Thakur, P.
Gupta, K.
Pal, A.
Powiązania:
https://bibliotekanauki.pl/articles/10908.pdf
Data publikacji:
2015
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Opis:
Biomedical research needs to leverage and exploit large amount of information reported in scientific publication. Literature data collected from publications has to be managed to extract information, transforms into an understandable structure using text mining approaches. Text mining refers to the process of deriving high-quality information from text by finding relationships between entities which do not show direct associations. Therefore, as an example of this approach, we present the link between two diseases i.e. breast cancer and obesity.Obesity is known to be associated with cancer mortality, but little is known about the link between lifetime changes in BMI of obese person and cancer mortality in both males and females. In this article, literature data for obesity and breast cancer was obtained using PubMed database and then methodologies which employs groups of common genes and keywords with their frequency of occurrence in the data were used, aimed to establish relation between obesity and breast cancer visualized using Pi-charts and bar graphs. From the data analysis, we obtained 1 gene which showed the link between both the diseases and validated using statistical analysis and disease-connect web server. We also proposed 8 common higher frequency keywords which could be used for indexing while searching the literature for obesity and breast cancer in combination.
Źródło:
International Letters of Natural Sciences; 2015, 44
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of inertia in the steady state pressurised flow of a non-Newtonian fluid between two curvilinear surfaces of revolution: Rabinowitsch fluid model
Autorzy:
Singh, U. P.
Gupta, R.S.
Kapur, V.K.
Powiązania:
https://bibliotekanauki.pl/articles/185617.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
efekt bezwładności
łożysko krzywoliniowe
zewnętrzny przepływ ciśnieniowy
curvilinear bearings
Rabinowitsch fluid model
inertia effect
externally pressurized flow
Opis:
In many practical situations fluids are normally blended with additives (viscosity index improvers, viscosity thickeners, viscosity thinners) due to which they show pseudoplastic and dilatant nature which can be modelled as cubic stress model (Rabinowitsch model). The cubic stress model for pseudoplastic fluids is adopted because Wada and Hayashi have shown that the theoretical results with this model are in good agreement with the experimental results. The present theoretical analysis is to investigate the pseudoplastic effect along with the effect of rotational inertia on the pressure distribution, frictional torque and fluid flow rate of externally pressurised flow in narrow clearance between two curvilinear surfaces of revolution. The expression for pressure has been derived using energy integral approach. To analyse and discuss the effects of pseudoplasticity and fluid inertia on the pressure distribution, fluid flow rate and frictional torque, the examples of externally pressurised flow in the clearance between parallel disks and concentric spherical surfaces have been considered.
Źródło:
Chemical and Process Engineering; 2011, 32, 4; 333-349
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study on Creep Behavior of Composite Solid Propellants Using the Kelvin-Voigt Model
Autorzy:
Bihari, B. K.
Rao, N. P. N.
Gupta, M.
Murthy, K. P. S.
Powiązania:
https://bibliotekanauki.pl/articles/358395.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
mechanical properties
viscoelasticity
propellant
creep
DMA
Opis:
A Kelvin-Voigt model consisting of a spring and a dashpot in parallel was applied for the viscoelastic characterization of solid rocket propellants. Suitable values of spring constants and damping coefficients were employed by a least squares fit of the errors to generate creep curves using a Dynamic Mechanical Analyzer (DMA) for composite solid propellants. Three different composite propellant formulations based on HTPB/AP/Al having burning rates of 5 mm/s, 15 mm/s and 20 mm/s were tested under different stress levels varying from 0.1 MPa to 3 MPa and at different temperatures varying from 35 °C to 85 °C. Creep behavior with recovery was studied and analyzed to evaluate the viscoelastic properties. The change in spring constants, representing elastic deformation, was very small compared to the damping coefficients for the propellants studied. For a typical propellant formulation, when the stress level was increased, the spring and damping coefficient both increased significantly whereas for an increase in temperature, they remained nearly constant. However, the ratio E/η was observed to be constant and independent of stress level. It was also observed that the variation of E and η varied linearly with increase in stress whereas their ratio showed a logarithmic variation. A mathematical correlation was developed to evaluate the viscoelastic properties during creep of composite propellants.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 3; 742-756
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Isolation and computational characterization of glutathione peroxidase gene from an aquatic fern - Salvinia molesta
Autorzy:
Rahaman, S.
Singh, P.K.
Basu, P.
Gupta, S.
Basu, M.
Ganguli, S.
Powiązania:
https://bibliotekanauki.pl/articles/11200.pdf
Data publikacji:
2016
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Opis:
Pteridophytes and more specifically ferns represent a large but threatened group of plants which often serve as important environmental markers for pollution. Reports regarding stress responses in ferns are rare, apart from a few studies involving the ecological distribution and molecular marker studies. This work isolates a glutathione peroxidase enzyme from an aquatic fern widely distributed in fresh and polluted water bodies adjacent to sources of environmental polluted sources. Further computational analyses were performed to study the structure of the protein encoded by the open reading frame. Results indicate the presence of a large number of binding pockets which serve as important binding sites in the interactions with the cognate ligands.
Źródło:
International Letters of Natural Sciences; 2016, 51
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Volumetric, Optical, Acoustical and Viscometric Study of Molecular Association in Binary Mixtures of Butylamine with 1-Butanol and Tert-Butanol
Autorzy:
Singh, S.
Parveen, S.
Shukla, D.
Gupta, M.
Shukla, J. P.
Powiązania:
https://bibliotekanauki.pl/articles/2047348.pdf
Data publikacji:
2007-06
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
43.35.+d
62.60.+v
82.60.Lf
Opis:
Density (ρ), refractive index (n), ultrasonic velocity (u), and viscosity (η) were measured for the binary mixtures formed by butylamine with 1-butanol and tert-butanol at temperatures 293, 303, and 313 K over the entire composition range. Excess molar volume V$\text{}_{m}^{E}$, molar refraction deviation ΔR$\text{}_{m}$, deviation in ultrasonic velocity Δu, viscosity deviation Δη, and excess Gibb's free energy of activation for viscous flow ΔG$\text{}^{*E}$ were derived from the experimental data and the computed results were fitted to the Redlich-Kister polynomial equation. The values of V$\text{}_{m}^{E}$, ΔR$\text{}_{m}$, Δu, Δη, and ΔG$\text{}^{*E}$ were plotted against the mole fraction of butylamine. The observed positive and negative values of excess parameters for both the mixtures were explained on the basis of intermolecular interactions present in these mixtures. The higher negative values of V$\text{}_{m}^{E}$ and ΔR$\text{}_{m}$ and positive values of Δu, Δη, and ΔG$\text{}^{*E}$ for butylamine + 1-butanol mixture suggest that specific interactions are taking place in butylamine + 1-butanol mixture, while weak dipole-dipole induced forces and dispersive forces seem to be responsible for butylamine + tert-butanol mixture. Furthermore, different empirical relations were used to correlate the binary refractive indices. An excellent agreement was found between experimental and theoretical values.
Źródło:
Acta Physica Polonica A; 2007, 111, 6; 847-858
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Endodontic treatment of immature tooth - a challenge
Autorzy:
Gupta, S.
Sodhi, S.P..
Brar, G.K.
Bansal, R.N.
Powiązania:
https://bibliotekanauki.pl/articles/2097446.pdf
Data publikacji:
2020
Wydawca:
Instytut Medycyny Wsi
Tematy:
mmature tooth
root apex
endodontic treatment
open apex
MTA
regenerative endodontics
Opis:
Root apex is an area of primary importance for an endodontist. When a tooth erupts in the oral cavity the apical foramen undergoes anatomical changes with age. Root development is completed and the root apex is closed three years after eruption of the tooth. Endodontic practice is influenced to a great extent by different stages of root development and the type of tissue present within the roots. Open apices pose a challenging problem for the success of root canal treatment because they favour the extravasation of the irrigating solution and/or sealer into periradicular tissues, thus jeopardizing apical healing. Regenerative endodontics (revascularization/pulpal regeneration) is a straightforward approach accomplished with currently available instruments and materials. A literature review suggests that Mineral Tri oxide Aggregate (MTA) is the most favourable and recommendable material for single-visit apexification, even in cases when regenerative endodontics cannot be performed. A plus point of MTA is its biocompatibility and hermetic apical seal with no micro-leakage. It should be considered as an effective alternate for treating immature teeth with necrotic pulps. Treatment of a tooth with open apex poses multiple challenges. However, it is not easy to decide which material should be used: Calcium hydroxide, Mineral Tri oxide Aggregate, Biodentine, Platlet Rich Fibrin (PRF), or White Portland Cement (WPC). The choice of treatment regimen depends on several factors, e.g. individual cases, experience of the operator, familiarity with handling various materials, and patient’s availability for follow-up appointments. This review highlights various challenges in the treatment of open apex, with emphasis on MTA compared with other materials.
Źródło:
Journal of Pre-Clinical and Clinical Research; 2020, 14, 3; 73-79
1898-2395
Pojawia się w:
Journal of Pre-Clinical and Clinical Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ashwagandha (Withania somnifera) – a herb with versatile medicinal properties empowering human physical and mental health
Autorzy:
Gupta, S.
Bansal, R.N.
Sodhi, S.P.S.
Brar, G.K.
Molhotra, M.
Powiązania:
https://bibliotekanauki.pl/articles/2098530.pdf
Data publikacji:
2021
Wydawca:
Instytut Medycyny Wsi
Tematy:
ashwagandha
Withania somnifera
herb
medicinal property
empowerment
physical health
mental health
Opis:
Introduction. Ashwagandha is a rasayana of Ayurveda system of medicines. It is a real potent regenerative tonic possessing several pharmacological properties like neuro-protective, anti-stress, anti-arthritic, antitumor, analgesic and anti-inflammatory. Objective. To illustrate applications and limitations of Ashwagandha in detail. Materials and method. Data was collected from various review and research publications. Literature review involved animal studies and human studies. Emphasis was given on versatility of medicinal properties. Results. Ashwagandha plays an important role in improving quality of life and performance at work and possess several pharmacologic actions. Each part of this herb i.e. from root to fruit possess medicinal properties. Conclusions. Ashwagandha possesses wide variety of therapeutic uses in each and every system of human body. The plant has also been widely studied for its various pharmacological activities like antioxidant, anxiolytic, adaptogen, memory enhancing, antiparkinsonian, antiinflammatory, antitumor properties. Irrespective of such large network of benefits this herb has some limitations of use in certain situations.
Źródło:
Journal of Pre-Clinical and Clinical Research; 2021, 15, 3; 129-133
1898-2395
Pojawia się w:
Journal of Pre-Clinical and Clinical Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Particle-inflow-gun-mediated genetic transformation of buffel grass [Cenchrus ciliaris L.]: optimizing biological and physical parameters
Autorzy:
Bhat, V
Dalton, S.J.
Kumar, S.
Bhat, B.V.
Gupta, M.G.
Morris, P.
Powiązania:
https://bibliotekanauki.pl/articles/2048302.pdf
Data publikacji:
2001
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
buffel grass
promoter
genetic transformation
physical parameter
Cenchrus ciliaris
biological parameter
grass
biotechnology
Źródło:
Journal of Applied Genetics; 2001, 42, 4; 405-412
1234-1983
Pojawia się w:
Journal of Applied Genetics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies