Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Dryzek, M." wg kryterium: Autor


Wyświetlanie 1-9 z 9
Tytuł:
Positron Annihilation Lifetime Spectroscopy of ABS Objects Manufactured by Fused Deposition Modelling
Autorzy:
Dryzek, M.
Dryzek, E.
Powiązania:
https://bibliotekanauki.pl/articles/1033901.pdf
Data publikacji:
2017-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
61.41.+e
Opis:
Positron annihilation lifetime spectroscopy was used to study acrylonitrile butadiene styrene (ABS) specimens manufactured using fused deposition modelling to explore possibilities of identifying differences in molecular structure. The set of specimens was prepared including square tiles and long rectangular tiles (100 mm and 200 mm long) with all filament roads parallel to the longer edge. All types of tiles were produced with various infill line distance parameter resulting in different overlapping of the roads in horizontal and vertical directions. The slight increase of the ortho-positronium lifetime indicating increase of the mean free volume radius was observed for the longest tiles for which influence of weld interface is expected to be most pronounced. No differences were observed for different infill line distance parameters.
Źródło:
Acta Physica Polonica A; 2017, 132, 5; 1506-1508
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preferential Positron Annihilation in Binary Alloys
Autorzy:
Kuriplach, J.
Dryzek, E.
Dryzek, J.
Šob, M.
Powiązania:
https://bibliotekanauki.pl/articles/2008109.pdf
Data publikacji:
1999-04
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
71.60.+z
Opis:
The effect of preferential positron annihilation at individual constituent atoms in binary alloys is examined theoretically and experimentally. In particular, the results of recently studied alloys Fe-Al and Mg-Cd together with new preliminary results for the Sn-In system are discussed and summarised. In the case of the Sn-In system, the concentration dependencies of positron annihilation rates and Doppler broadening spectra are analysed.
Źródło:
Acta Physica Polonica A; 1999, 95, 4; 605-611
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reverse Transformation of Deformation Induced Martensite in Austenitic Stainless Steel
Autorzy:
Dryzek, E.
Sarnek, M.
Powiązania:
https://bibliotekanauki.pl/articles/1196051.pdf
Data publikacji:
2014-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
81.05.Bx
Opis:
Cumulative isochronal annealing of stainless steel 1.4307 samples deformed by compression was investigated using the Doppler broadening of the annihilation line measurements. Higher level of plastic deformation is accompanied not only by higher concentration of defects but also by higher amount of α' martensite. The annealing studies revealed creation of defects in the temperature range between 450C and 650C pointing out the reverse transition of α' martensite to austenite. This is confirmed by magnetic susceptibility and microhardness measurements.
Źródło:
Acta Physica Polonica A; 2014, 125, 3; 710-713
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Positron annihilation studies of high-manganese steel deformed by rolling
Autorzy:
Dryzek, E.
Sarnek, M.
Wróbel, M.
Powiązania:
https://bibliotekanauki.pl/articles/146593.pdf
Data publikacji:
2015
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
plastic deformation
positron annihilation
high-manganese steel
Opis:
Positron annihilation spectroscopy (PAS) has been used to study the annealing behavior of cold rolled Fe – 21 wt% Mn steel with 0.05 wt% C. After the initial annealing of defects shown by Doppler broadening of the annihilation line, a slight increase in the annihilation line shape parameter, i.e., the so-called S parameter and then its decrease in the temperature range between 225◦C and 450◦C indicates generation of new defects and their subsequent annealing. This temperature range coincides with X-ray diffraction measurements, which indicate reversion of deformation-induced ε-martensite. However, for annealing in this temperature range with slow cooling of the sample, the formation of ferrite already starts. The results are compared with our previous results for deformed austenitic stainless steel 1.4301 (EN) where only reversion of deformation-induced α'-martensite was detected.
Źródło:
Nukleonika; 2015, 60, No. 4, part 1; 709-712
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Annealing behaviour of plastically deformed stainless steel 1.4307 studied by positron annihilation methods
Autorzy:
Dryzek, E.
Sarnek, M.
Siemek, K.
Powiązania:
https://bibliotekanauki.pl/articles/148014.pdf
Data publikacji:
2013
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
plastic deformation
positron annihilation
stainless steel
Opis:
Isochronal and isothermal annealing of stainless steel 1.4307 samples deformed by compression were investigated using Doppler broadening measurements of the annihilation line. We made an attempt to describe the obtained dependencies in terms of vacancy migration and sinking to the grain boundaries. The model assumed spherical grains with a homogeneous initial distribution of vacancies. The model was capable of following the isochronal annealing data quite accurately. However, the obtained activation energy of vacancy migration equal to 0.44 plus or minus 0.05 eV seemed too low. The isothermal annealing dependency was reproduced less precisely. The reason for this may be the presence of the alfa'-martensite particles in the samples, which can introduce additional defects seen by positrons in the temperature range in which the martensite reversion takes place.
Źródło:
Nukleonika; 2013, 58, 1; 215-219
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bean cotyledons microporosity under hydration conditions
Autorzy:
Golonka, P.
Dryzek, J.
Kluza, M.
Powiązania:
https://bibliotekanauki.pl/articles/147053.pdf
Data publikacji:
2002
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
bound water
free volume
PAS
proton NMR
Opis:
Positron Annihilation Spectroscopy (PAS), proton Nuclear Magnetic Relaxation (NMR) and hydration kinetics measurements were applied to study the free volume formation process in the initial stages of bean cotyledons imbibition. These methods allowed us to analyse the behaviour of bound water in the bean cotyledon molecular structure, and to observe free volume regions formed there. They also made it possible to describe their dimensions and concentration quantitatively. Good correlation was found between the increase of the free volume radius and the amount of water bound to the bean cotyledon solid matrix.
Źródło:
Nukleonika; 2002, 47, 4; 137-140
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Free-Volume and Tensile Properties of Glass Fibre Reinforced Polyamide 6 Composites
Autorzy:
Dryzek, E.
Wróbel, M.
Juszyńska-Gałązka, E.
Powiązania:
https://bibliotekanauki.pl/articles/1033894.pdf
Data publikacji:
2017-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
61.41.+e
Opis:
The tensile properties and free volume of commercially available modified polyamid 6 and polyamid 6 composites with 15 and 30 wt% of glass fibre were the subject of the studies. The tensile test allowed us to obtain the stress-strain curves and determine the tensile properties of the polyamid 6 samples. The positron lifetime measurements were performed for the samples before the test and for the samples in the vicinity of the break after they failed. The composites exhibited slightly lower values of the ortho-positronium lifetime and therefore smaller size of the local free volumes in comparison to polyamid 6 without reinforcement. The analysis of the positron lifetime spectra indicated size distribution of the free volume. The initially narrower distributions for the composite samples became broader as a result of the deformation. The deformation caused also increase of the ortho-positronium intensity in the obtained positron lifetime spectra.
Źródło:
Acta Physica Polonica A; 2017, 132, 5; 1501-1505
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Estimate of the Crystallite Size for Nanocrystalline AISI 316L Stainless Steel and Armco Iron Processed by Hydrostatic Extrusion Using Variable Energy Positron Beam
Autorzy:
Sarnek, M.
Dryzek, E.
Horodek, P.
Pachla, W.
Powiązania:
https://bibliotekanauki.pl/articles/1033950.pdf
Data publikacji:
2017-11
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
stainless steel
Armco iron
plastic deformation
hydrostatic extrusion
variable energy positron beam
X-ray diffraction
Opis:
The paper presents the results of research of nanocrystalline AISI 316L type stainless steel and nanocrystalline Armco pure iron processed by severe plastic deformation using hydrostatic extrusion method. Surface and subsurface of the steel samples extruded at different pressure were investigated using variable energy positron beam. It enabled us to determine the positron diffusion length and compare its values with those for annealed AISI 304 stainless steel. Furthermore positron lifetime and microhardness were measured for all the samples and X-ray diffraction was used to estimate the crystallite size.
Źródło:
Acta Physica Polonica A; 2017, 132, 5; 1598-1601
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Slow Positron Beam Studies of the Stainless Steel Surface Exposed to Sandblasting
Autorzy:
Horodek, P.
Dryzek, J.
Kobets, A.
Kulik, M.
Lokhmatov, V.
Meshkov, I.
Orlov, O.
Pavlov, V.
Rudakov, A.
Sidorin, A.
Siemek, K.
Powiązania:
https://bibliotekanauki.pl/articles/1336525.pdf
Data publikacji:
2014-03
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
78.70.Bj
82.80.Yc
61.82.Bg
Opis:
The paper presents slow positron beam studies of the stainless steel grade 304 AISI samples annealed in the flow $N_2$ atmosphere and sandblasted under different pressure from 1 to 7 bar. Heating of specimens caused formation of an additional layer on the surface which can be identified as oxides. Sandblasting reduces the thickness of the oxide layer and also defects concentration (vacancies as we suppose) decreases in dependence on pressure applied during blasting. Additionally, the atomic concentrations of oxygen have been obtained using nuclear methods (Rutherford backscattering and nuclear reactions) in the near surface layers of the studied samples.
Źródło:
Acta Physica Polonica A; 2014, 125, 3; 714-717
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-9 z 9

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies