Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "temperature development" wg kryterium: Wszystkie pola


Tytuł:
Temperature development of selected materials in a reduced model – experimental test
Autorzy:
Müllerová, Jana
Krajčír, Maroš
Powiązania:
https://bibliotekanauki.pl/articles/1933813.pdf
Data publikacji:
2020-12-17
Wydawca:
Wyższa Szkoła Bezpieczeństwa Publicznego i Indywidualnego Apeiron w Krakowie
Tematy:
combustion
temperature development
fire parameters
combustible materials
Opis:
The work is focused on an experimental test of temperature development in a scale model. Various types of combustible materials were used in the test in combination with the spruce wood. The work points to the influence of the fuel source on selected parameters of a fire in an enclosed space. The course of a fire is influenced by various factors. The course of a fire in an enclosed space differs from the course of a fire in an open space. As a part of the overall development of the fire, the temperature of the fire is affected. Therefore, one can state that the parameters affecting the development of an internal fire also have a direct effect on the temperature development. The main goal of this work is to compare different types of materials in terms of the properties they manifest during a fire. The practical part contains the analysis of the materials used in the experiment. Description of the scale model and of the measuring control panel are the content of another part of the work. In the end there is a comparison of the individual temperature curves.
Źródło:
Kultura Bezpieczeństwa. Nauka – Praktyka – Refleksje; 2020, 38(38); 79-88
2299-4033
Pojawia się w:
Kultura Bezpieczeństwa. Nauka – Praktyka – Refleksje
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sea surface temperature development of the Baltic sea in the period 1990-2004
Autorzy:
Siegel, H.
Gerth, M.
Tschersich, G.
Powiązania:
https://bibliotekanauki.pl/articles/48942.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
Sopot
regional variation
sea surface temperature
seasonal variation
conference
interannual variation
Baltic Sea
trend
Opis:
Sea Surface Temperature (SST) maps derived from NOAA weather satellites for the period 1990–2004 were used to investigate seasonal and inter-annual variations in the Baltic Sea. A comparison between monthly mean SST and in situ measurements at the MARNET station ‘Arkona Sea’ showed good agreement with differences in July and August. Monthly means reflect strong seasonal and interannual variations. The yearly means show a slight positive trend with an increase of 0.8 K in 15 years. In particular, summer and autumn months contribute to this positive trend, with stronger trends in the northern than in the southern Baltic. The winters are characterised by a slightly negative trend. The winter minimum SST in the Arkona Sea correlates best with the WIBIX climate index derived for the Baltic region.
Źródło:
Oceanologia; 2006, 48, S
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Temperature induced development of porous structure of bituminous coal chars at high pressure
Autorzy:
Howaniec, N.
Powiązania:
https://bibliotekanauki.pl/articles/92100.pdf
Data publikacji:
2016
Wydawca:
Główny Instytut Górnictwa
Tematy:
coal
char
pyrolysis
temperature
pressure
porous structure
węgiel
karbonizat
pyroliza
temperatura
ciśnienie
struktura porowata
Opis:
The porous structure of chars affects their reactivity in gasification, having an impact on the course and product distribution of the process. The shape, size and connections between pores determine the mechanical properties of chars, as well as heat and mass transport in thermochemical processing. In the study the combined effects of temperature in the range of 973e1273 _K and elevated pressure of 3 MPa on the development of porous structure of bituminous coal chars were investigated. Relatively low heating rate and long residence time characteristic for the in-situ coal conversion were applied. The increase in the temperature to 1173 _K under pressurized conditions resulted in the enhancement of porous structure development reflected in the values of the specific surface area, total pore volume, micropore area and volume, as well as ratio of the micropore volume to the total pore volume. These effects were attributed to the enhanced vaporization and devolatilization, as well as swelling behavior along the increase of temperature and under high pressure, followed by a collapse of pores over certain temperature value. This proves the strong dependence of the porous structure of chars not only on the pyrolysis process conditions but also on the physical and chemical properties of the parent fuel.
Źródło:
Journal of Sustainable Mining; 2016, 15, 3; 120-124
2300-1364
2300-3960
Pojawia się w:
Journal of Sustainable Mining
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of the relationship between drying rate and internal temperature development during microwave drying of porous materials
Określenie relacji między szybkością suszenia a rozkładem temperatury wewnętrznej podczas suszenia mikrofalowego materiałów porowatych
Autorzy:
Araszkiewicz, M.
Kozioł, A.
Sikorska-Maciejak, J.
Trusek-Hołownia, A.
Powiązania:
https://bibliotekanauki.pl/articles/2073033.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
porous material
drying kinetics
temperature
microwaves
drying
materiał porowaty
kinetyka suszenia
temperatura
mikrofale
suszenie
Opis:
The experimentally determined temperature and moisture removal relationships are discussed. The experiments were carried out for model material (gypsum spheres) dried at 200, 300, 400 and 500 W power level settings of microwaves. To compare microwave drying with convective diying the series of experiments with hot air at 150°C were performed. The temperature and mass readings were taken continuously during microwave drying using fibre optic sensors. A significant irregularity in both temperature and drying rate were revealed in microwave drying at high power levels.
W pracy omówiono wyznaczone na drodze doświadczalnej relacje między temperaturą a ubytkiem masy podczas procesu suszenia mikrofalowego. Eksperymenty zostały przeprowadzone na materiale modelowym (kulkach z gipsu) suszonym przy nastawie mocy mikrofal 200, 300, 400 i 500 W. W celu porównania procesu z wykorzystaniem promieniowania mikrofalowego oraz suszenia konwekcyjnego wykonano serię eksperymentów z gorącym powietrzem o temperaturze 150°C. Podczas suszenia rejestrowano w sposób ciągły zmiany masy (waga elektroniczna) i temperatury (czujniki światłowodowe). Przy wysokich poziomach mocy, zarówno w temperaturze jak i szybkości suszenia, zostały zaobserwowane istotne nieregularności.
Źródło:
Inżynieria i Aparatura Chemiczna; 2014, 5; 334--336
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of protruding rebar from casting element on temperature development and compressive strength of mass concrete
Wpływ wystającego z elementu betonowego zbrojenia na rozwój temperatury i wytrzymałość na ściskanie betonu w czasie jego dojrzewania
Autorzy:
Kaszyńska, M.
Skibicki, S.
Powiązania:
https://bibliotekanauki.pl/articles/230546.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wytrzymałość na ściskanie
temperatura
dojrzewanie
beton samozagęszczalny
pręt zbrojeniowy wystający
konstrukcja masywna
compressive strength
temperature
casting
self-consolidating concrete
protruding rebar
massive structure
Opis:
The influence of rebar, protruding from concrete element during casting, on temperature and strength development was analyzed. Test models of size 50 cm x 50 cm x 50 cm were made with and without protruding rebar. The rebar protruding from the sample simulated the conditions of the hardening of elements such as bridge abutments or pylons, which require technological break. Samples were cast in insulated formworks, to create semi-adiabatic conditions for concrete curing, simulating real conditions of curing of mass structures. The research utilized selfconsolidating concrete with two different rapid hardening cements: CEM I 42.5R and CEM I 52.5R, and blastfurnace cement CEM III/A 42.5N. Continuous registration of temperatures in the samples was performed for the first 7 days. Based on the results acquired and compressive strength, the amount and kinetics of the heat given off in the concrete was determined and an evaluation of its strength in conditions simulating actual conditions was performed. The research showed that the difference in temperature between the reinforced and non-reinforced sample was approximately 14.0° C.
W artykule przeanalizowano wpływ wystającego z elementu betonowego zbrojenia na rozwój temperatury i wytrzymałości betonu na ściskanie podczas wznoszenia konstrukcji. Wystające zbrojenie może symulować warunki panujące podczas betonowania takich elementach jak przyczółki mostowe czy pylony. Celem badań było ustalenie zależności między ilością generowanego ciepło i wczesną wytrzymałością na ściskanie dla samozagęszczalnych betonów dojrzewających w konstrukcjach masywnych. Wyniki badań mogą być wykorzystane przy opracowaniu technologii betonowania w budownictwie mostowym. W ramach badań wykonano w zaizolowanych termicznie systemowych szalunkach próbki o wymiarach 50 cm x 50 cm x 50 cm z wystającym z konstrukcji zbrojeniem (symulujące element podczas przerwy roboczej) oraz element referencyjny bez zbrojenia. Zastosowane pręty zbrojeniowe miały średnicę 2 cm i długość 80 cm. Jeden koniec pręta znajdował się 20 cm od dna szalunku i wystawał 33 cm ponad jego górną izolację termiczną. W próbce znajdowało się 36 równomiernie rozłożonych prętów zbrojeniowych, co daje stopień zbrojenia równy 4.5%. Temperatura była mierzona podczas dojrzewania betonu za pomocą termopary typu T osadzonej w betonie. Termopary były przymocowane do zbrojenia. Natomiast w próbce niezbrojonej termopary były umieszczone w betonie za pomocą specjalnego zaizolowanego pręta. Temperatura była mierzona przez 7 dni w 5 minutowym interwale czasowym, za pomocą aparatury ConReg 706. Próbka zbrojona i niezbrojona podczas badania były wykonane w tym samym czasie. Termopary były umieszczone w szalunku i podłączone do aparatury pomiarowej przed rozpoczęciem badania. Temperatura wewnątrz próbki była mierzona w trzech punktach: w środku próbki (punkt 1), 5 cm od bocznej krawędzi (punkt 2) oraz 5 cm od górnej krawędzi (punkt 3).
Źródło:
Archives of Civil Engineering; 2020, 66, 2; 211-233
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling temperature-dependent development and demography of Adalia decempunctata L.(Coleoptera: Coccinellidae) reared on Aphis gossypii (Glover) (Homoptera: Aphididae)
Autorzy:
Mojib-Haghghadam, Z.
Sendi, J.J.
Zibaee, A.
Mohaghegh, J.
Karimi-Malati, A.
Powiązania:
https://bibliotekanauki.pl/articles/65247.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Opis:
Development and demography of Adalia decempunctata L. were studied under laboratory conditions at seven constant temperatures (12, 16, 20, 24, 28, 32 and 36°C). First instar larvae failed to develop to second instar at 12°С and no development occurred at 36°C. The total developmental time varied from 47.92 days at 16°C to 15.94 days at 28°C and increased at 32°C. The lower temperature thresholds of 11.05 and 9.90°C, and thermal constants of 290.84 day-degree and 326.34 day-degree were estimated by traditional and Ikemoto- Takai linear models, respectively. The lower temperature threshold (Tmin) values estimated by Analytis, Briere-1, Briere-2 and Lactin-2 for total immature stages were 11.99, 12.24, 10.30 and 10.8°C, respectively. The estimated fastest developmental temperatures (Tfast) by the Analytis, Briere-1, Briere-2 and Lactin-2 for overall immature stages development of A. decempunctata were 31.5, 31.1, 30.7 and 31.7°C, respectively. Analytis, Briere-1, Briere-2 and Lactin-2 measured the upper temperature threshold (Tmax) at 33.14, 36.65, 32.75 and 32.61°C. The age-stage specific survival rate (sxj) curves clearly depicted the highest and lowest survival rates at 16 and 32°C for males and females. The age-specific fecundity (mx) curves revealed higher fecundity rate when fed A. gossypii at 24 and 28°C. The highest and lowest values of intrinsic rate of increase (r) were observed at 28 and 16°C (0.1945 d–1 and 0.0592 d–1, respectively). Also, the trend of changes in the finite rate of increase (λ) was analogous with intrinsic rate of increase. The longest and shortest mean generation time (T) was observed at 16 and 28°C, respectively and the highest net reproductive rates (R0) was estimated at 24 and 28°C. According to the results, the most suitable temperature seems to be 28°C due to the shortest developmental time, highest survival rate, and highest intrinsic rate of increase.
Źródło:
Journal of Plant Protection Research; 2019, 59, 2
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of induced temperature field on development of curvilinear crack with bonds between the faces in end zones
Autorzy:
Mirsalimov, V. M.
Mustafayev, A. B.
Powiązania:
https://bibliotekanauki.pl/articles/949294.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
curvilinear crack with interfacial bonds
thermoelastic stress field
cohesive forces
Opis:
Temperature changes near the end of a curvilinear cohesive crack and their influence on crack growth are investigated. The problem of local temperature changes consists in a delay or retardation of the cohesive crack growth. The bonds between the curvilinear crack faces in the end zones are modeled by application to the crack surface cohesive forces caused by the presence of bonds. The boundary value problem of equilibrium of the curvilinear crack with interfacial bonds in the end zones under action of external tensile loads, induced temperature field and tractions in the bonds preventing to its opening, is reduced to a system of singular integral equations with a Cauchy-type kernel. From the solution of this equation system, normal and tangential tractions in the bonds are found. Analysis of the limit equilibrium of the crack using the end zone model is performed on the basis of a criterion of bonds limiting stretching and includes: 1) establishment of tractions depending on opening of the crack faces; 2) evaluation of the stress state near the curvilinear crack with taking into account tensile loads, induced temperature field, tractions in the bonds; 3) determination of the critical external tensile loads.
Źródło:
Journal of Theoretical and Applied Mechanics; 2017, 55, 3; 765-778
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ temperatury inkubacji na rozwój i stosunki biotyczne między Trichoderma spp. a grzybami patogenicznymi
Effect of incubation temperature on development and biotic relations between Trichoderma spp. and pathogenic fungi
Autorzy:
Dluzniewska, J.
Powiązania:
https://bibliotekanauki.pl/articles/47198.pdf
Data publikacji:
2004
Wydawca:
Politechnika Bydgoska im. Jana i Jędrzeja Śniadeckich. Wydawnictwo PB
Tematy:
temperatura inkubacji
wzrost grzybni
Trichoderma harzianum
Trichoderma pseudokoningii
Trichoderma viride
stosunki biotyczne
grzyby chorobotworcze
Opis:
W przeprowadzonym doświadczeniu badano wpływ temperatury inkubacji na wzrost grzybni, kiełkowanie zarodników oraz indywidualny efekt biotyczny (IEB) grzybów Trichoderma harzianum, T. pseudokoningii i T. viride. Temperatury w zakresie 5-15oC hamowały wzrost grzybni i tworzenie strzępek kiełkowych badanych izolatów Trichoderma spp. Również wartość IEB zależała od temperatury. Wszystkie izolaty Trichoderma spp. silnie ograniczały wzrost patogenów tylko w temperaturze 20oC.
The present experiment investigated the effect of incubation temperature on growth of mycelium, spore germination and on the individual biotic effect (IBE) of Trichoderma harzianum, T. pseudokoningii and T. viride fungi. The incubation temperature from 5 to 15oC inhibited mycelium growth and sporogenous hypha formation of the isolates researched. Also the IBE value depended on temperature. All Trichoderma spp. isolates strongly inhibited the growth of pathogens only at the temperature of 20oC.
Źródło:
Acta Scientiarum Polonorum. Agricultura; 2004, 03, 2
1644-0625
Pojawia się w:
Acta Scientiarum Polonorum. Agricultura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ rozwoju terytorialnego Warszawy na warunki termiczne
Effect of Warsaw area development on temperature reconditions
Autorzy:
Kossowska-Cezak, Urszula
Powiązania:
https://bibliotekanauki.pl/articles/945189.pdf
Data publikacji:
1999
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
Warsaw
temperature reconditions
Opis:
In the paper changes of temperature differences between city centre of Warsawand south- -western peripheries during last 63 years (1933-1995) have been considered. Mean value ~t was 0.37 deg and increased about 0.01 deg per 5 years. The lowest ~t (0.22 deg) was in 1945-1955. It was caused by destruction of the city during the war (1944). The highest ~t (0.67deg) was in 1963-1965. This was caused by prevailing of atmospheric circulation from south-western sector.
W pracy omówiono zmiany różnic temperatury pomiędzy centrum Warszawy i południowo- -zachodnim krańcem miasta w okresie ostatnich 63 lat (1933-1995). Średnia wartość ~t wynosi 0,37 deg i wzrastała o około 0,01 degj5 lat. Najniższą wartość ~t (0,22 deg) notowano w latach 1945-1955, co było spowodowane zniszczeniami miasta w okresie wojny (1944). Najwyższa wartość ~t (0,67 de g) przypadająca na lata 1963-1965 jest efektem przewagi cyrkulacji atmosferycznej z sektora południowo-zachodniego.
Źródło:
Acta Universitatis Lodziensis. Folia Geographica Physica; 1999, 3
1427-9711
2353-6063
Pojawia się w:
Acta Universitatis Lodziensis. Folia Geographica Physica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of low temperature plasma nox control system for marine diesel engine
Autorzy:
Borkowski, T.
Myśków, J.
Hołub, M.
Kalisiak, S.
Powiązania:
https://bibliotekanauki.pl/articles/243384.pdf
Data publikacji:
2007
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
marine diesel engine
exhaust emission gas treatment
low temperature plasma reactor
Opis:
The control of nox emissions from marine engines proves a challenge. Diesel engine manufacturers have been investigating a variety of methods with aim of reducing nox emissions. Currently, the plasma technology is undergoing rapid development in application to diesel engine exhausts. A combination of non-thermal plasma with catalysts can be referred to plasma assisted catalysts technology. This paper briefly describes research efforts aimed at non-thermal plasma reactor development for ship use with primary focus on NO oxidation condition. The part scale plasma reactor models have been designed and manufactured for the purpose of this trial. Exhaust emission plasma after-treatment module was fitted on exhaust outlet path of the marine test bed engine for fractional exhaust gas stream examination. Subsequently, the comprehensive series of trials were performed to assess the exhaust flow properties of the main exhaust channel and plasma reactor by-pass duct. Emission measurements were carried out on engine at steady-state operation. The NO reaction activity was a major task of the experiment and throughout the measurements, the engine outlet nox levels (NO and NO2) were monitored with simultaneous NO, NO2, N2O level recording after NTP reactor.
Źródło:
Journal of KONES; 2007, 14, 3; 91-99
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of temperature on the development of Thrips nigropilosus Uzel (Thysanoptera: Thripidae) on Mentha x piperita L. and the impact of pest on the host plant
Autorzy:
Kucharczyk, H.
Kucharczyk, M.
Winiarczyk, K.
Lubiarz, M.
Tchórzewska, D.
Powiązania:
https://bibliotekanauki.pl/articles/12682489.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Tematy:
plant cultivation
greenhouse cultivation
mint
Mentha piperita
herbal plant
host plant
plant morphology
plant anatomy
morphological change
anatomical change
pest
plant pest
Thysanoptera
Thripidae
Thrips nigropilosus
foraging
life cycle
temperature effect
Opis:
Thrips nigropilosus Uzel is a polyphagous species occurring mainly in temperate climates. Its life cycle depends on photoperiodic and temperature conditions. T. nigropilosus feeds on different plant species, but it is considered one of the most serious pests of pyrethrum plants causing serious economic problems. However, several additional agricultural host plants have been affected by T. nigropilosus, including spearmint, cucumber, and lettuce, indicating that this insect can significantly widen its habitats and occurs especially frequently in greenhouses. We report that T. nigropilosus massively attacked Mentha × piperita L. cultivated in greenhouses in central Poland and destroyed the entire mint crops within a short time. The study provided insight into the harmful effect of the thrips and showed that the length of the thrips developmental cycle was reduced with temperature increases from 18 to 26.6°C. The lower threshold temperatures were 13.7, 10.2, 5.0, and 10.1 for eggs, larvae, pupae, and total development, respectively, and the thermal constant for the same developmental stages was 65.9, 90, 132.5, and 284.9-degree days. Both parameters were estimated by linear regression analysis. During our experiment, T. nigropilosus developed by thelytokous parthenogenesis. The morphological and anatomical changes in damaged plants were associated with the fact that the insect began feeding on the lower lamina surface close to the leaf midribs, but no damage to vascular bundles and glandular cells was observed.
Źródło:
Acta Scientiarum Polonorum. Hortorum Cultus; 2019, 18, 3; 219-233
1644-0692
Pojawia się w:
Acta Scientiarum Polonorum. Hortorum Cultus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effects of temperature on the development of the moth Acrobasis advenella (Zinck.) in the laboratory
Wpływ temperatury na długość rozwoju Acrobasis advenella (Zinck.) w warunkach laboratoryjnych
Autorzy:
Górska-Drabik, E.
Powiązania:
https://bibliotekanauki.pl/articles/2184868.pdf
Data publikacji:
2014
Wydawca:
Uniwersytet Przyrodniczy w Lublinie. Wydawnictwo Uniwersytetu Przyrodniczego w Lublinie
Źródło:
Annales Universitatis Mariae Curie-Skłodowska. Sectio EEE: Horticultura; 2014, 24, 2; 17-26
1233-2127
Pojawia się w:
Annales Universitatis Mariae Curie-Skłodowska. Sectio EEE: Horticultura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of environmental factors on reproduction of polar vascular plants
Autorzy:
Kellmann-Sopyla, W.
Pastorczyk, M.
Gielwanowska, I.
Powiązania:
https://bibliotekanauki.pl/articles/11942.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
environmental factor
plant reproduction
polar plant
vascular plant
climate change
generative reproduction
warming
flower development
seed formation
air temperature
ultraviolet radiation
reproductive phase
vegetation
Opis:
In the last few decades, changes of reproductive pattern of polar vascular plants have been observed, for the benefit of generative propagation. The reasons for this phenomenon are attributed to intensively following climate change, whose effects may be various. Warming causes the production of the greater number of generative structures, with higher quality. Our macroscopic observations conducted on specimens of polar vascular plants, cultivated in University of Warmia and Mazury greenhouse, indicate that the effect of temperature increase on flower development and seed formation is inconsistent. On the other hand enhanced levels of UV-B radiation can negatively affect seedlings. The complexity of the climate change causes tremendous difficulties in defining a clear and unquestioned way of modifications during the reproductive phase of the described plants.
Źródło:
Papers on Global Change; 2011, 18
2300-8121
1730-802X
Pojawia się w:
Papers on Global Change
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
In vitro culture of white lupin embryos as a stage for SSD technique
Autorzy:
Ogrodowicz, Piotr
Mikołajczak, Krzysztof
Kuczyńska, Anetta
Kaczmarek, Zygmunt
Ćwiek-Kupczyńska, Hanna
Surma, Maria
Adamski, Tadeusz
Święcicki, Wojciech
Barzyk, Paweł
Trzeciak, Renata
Kempa, Michał
Powiązania:
https://bibliotekanauki.pl/articles/2148491.pdf
Data publikacji:
2021-03-31
Wydawca:
Instytut Uprawy Nawożenia i Gleboznawstwa – Państwowy Instytut Badawczy
Tematy:
embryo development
single seed descent technique
survival rate
temperature regimes
type of growth
white lupin
Opis:
White lupin is an important source of proteins, the content of which amounts to 36–40% in its seeds. Breeding of new varieties usually takes several years. The present study aimed to shorten the breeding cycle by applying the single-seed descent technique together with in vitro culture of embryos dissected from immature seeds. The effects of temperature on embryo development were studied in indeterminate vs. determinate varieties in in vitro culture using the following temperature regimes:(1) 8 °C; (2) 16 °C in the first week, then 8 °C; (3) 20 °C in the first week, then 20/18 °C; and (4) 16 °C throughout the culture period. The embryos were cultured on the standard Murashige and Skoog medium. The observed growth rate of plantlets as well as the survival of plants ex vitro showed that at lower temperatures (8–16 °C) the plants developed slowly, but their ex vitro survival rate was higher compared to those grown at a higher temperature (20 °C). In addition, the results indicated that the in vitro embryo development rate of determinate varieties is significantly lower than that of indeterminate varieties.
Źródło:
Polish Journal of Agronomy; 2021, 44; 9-14
2081-2787
Pojawia się w:
Polish Journal of Agronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of multiple velocity and temperature probe sets for ventilated spaces
Autorzy:
Alimardani, R.
Hoff, S.J.
Powiązania:
https://bibliotekanauki.pl/articles/24933.pdf
Data publikacji:
2005
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
temperature measurement
temperature
ventilation
probe
development
thermistor
velocity
Źródło:
International Agrophysics; 2005, 19, 1
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of temperature and relative humidity on the development and hatching of larvae of the tick Dermacentor reticulatus [Fabricius, 1794] [Acari: Ixodida]
Autorzy:
Siuda, K.
Sebesta, R.
Powiązania:
https://bibliotekanauki.pl/articles/836294.pdf
Data publikacji:
1999
Wydawca:
Polskie Towarzystwo Parazytologiczne
Tematy:
parasite
Ixodida
humidity
temperature
Dermacentor reticulatus
Acari
development
larva
tick
Źródło:
Annals of Parasitology; 1999, 45, 4
0043-5163
Pojawia się w:
Annals of Parasitology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of temperature on guaiacol peroxidase of Pyrus communis
Autorzy:
Saeidian, S.
Ghasemifar, E.
Powiązania:
https://bibliotekanauki.pl/articles/10793.pdf
Data publikacji:
2013
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
temperature effect
guaiacol
Peroxidase
Pyrus communis
enzyme
plant growth
plant development
cell wall
Opis:
Peroxidase (EC 1.11.1.7; donor: hydrogen-peroxide oxidoreductase, POD) is one of the key enzymes controlling plant growth, differentiation and development. The enzyme participates in construction, rigidification and eventual lignification of cell walls, biosynthesis of ethylene from 1-aminocyclopropane-1-carboxylic acid and H2O2, regulation of auxin level through auxin catabolism, protection of tissue from damage and infection by pathogenic microorganisms, the oxidation of indoleacetic acid. For peroxidase activity in wild pears extract one pH optimum was observed at 6.5 that probably belong to atleast one isoenzyme. Activity of peroxidase in presence of guaiacol and H2O2 was optimum after incubation at 40 °C. Maximum activity of peroxidase is 300 % .Activity increased to 240 %, 300 %, 70 % and 10 % after 60 minute incubation at 30, 40, 45 and 60 °C for peroxidase. Incubation at high temperature (70 °C) was accompanied with decrease of activity to 10 % peroxidase activity.
Źródło:
International Letters of Natural Sciences; 2013, 05
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza scenariuszowa rozwoju reaktorów wysokotemperaturowych w Polsce
Development scenarios of high temperature reactors in Poland
Autorzy:
Terlikowski, P.
Paska, J.
Powiązania:
https://bibliotekanauki.pl/articles/283739.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
reaktor wysokotemperaturowy HTR
analiza SWOT
polski przemysł
polityka energetyczna
scenariusz rozwoju
High Temperature Reactor
SWOT analysis
polish industry
energy policy
development scenario
Opis:
W artykule przedstawiono opis technologii reaktorów wysokotemperaturowych (HTR), z wyszczególnionymi jej zaletami i wadami. Omówiono doświadczenia płynące z realizacji dotychczasowych projektów HTR na świecie, zarówno wersji demonstracyjnych, jak i wdrożeń komercyjnych. Przeprowadzono analizę zapotrzebowania na energię elektryczną, ciepło oraz wodór, które mogą być produkowane z wykorzystaniem HTR. Scharakteryzowano możliwości zaangażowania polskiego przemysłu w produkcję i wykorzystanie reaktorów wysokotemperaturowych. Przeprowadzono analizę SWOT metodą PEST, dotyczącą rozwoju HTR w Polsce. Przeprowadzone badania umożliwiły wyróżnienie dwóch czynników niepewności, to jest polityki energetycznej, prowadzonej przez rząd RP w sposób spójny lub chaotyczny, oraz otoczenia makroekonomicznego, wrogiego lub sprzyjającego inwestycji. W analizie krzyżowej tych czynników zidentyfikowano cztery wyróżnione obszary, będące podstawą do stworzenia scenariuszy rozwoju HTR w Polsce. Scenariusz Polska pionierem zakłada przekonanie otoczenia biznesowego o zasadności i opłacalności inwestycji, co przy sprzyjającej polityce państwa skutkuje budową pierwszego reaktora HTR. Scenariusz Dryf atomowy wskazuje na nieumiejętne zarządzanie oraz błędne decyzje na szczeblach politycznych, które sprawiają, że pomimo dużego zainteresowania technologią reaktorów wysokotemperaturowych wśród spółek energetycznych oraz konsumentów, dalsze prace nad tym projektem są ciągle odkładane na przyszłość. Scenariusz Polska bez atomu zakłada brak zainteresowania inwestorów w połączeniu z biernym stanowiskiem środowiska politycznego, co powoduje zaniechanie dalszych prac nad technologią HTR już w fazie projektowej. Natomiast w scenariuszu Pod prąd założono, że pomimo profesjonalnego podejścia rządu do rozwoju technologii HTR, brak inwestorów i zainteresowanych odbiorców sprawia, że projekt jest znacznie opóźniony w czasie i nie ma pewności, że kiedykolwiek zostanie sfinalizowany.
The article presents an overview of high temperature reactor (HTR) technology, with its advantages and disadvantages. The experience of existing HTR projects in the world, both demo versions and commercial implementations, is discussed. An analysis of the demand for electricity, heat and hydrogen that could be produced using HTR is performed. The ability of the Polish industry to engage in the production and use of high temperature reactors has been characterized. A SWOT analysis of HTR development in Poland is performed. It was implemented in accordance with the PEST methodology, which is to specify the relevance of political, economic, social and technological elements. Due to the aforementioned research, two axes of uncertainty factors can be distinguished: energy policy, conducted by the Polish government in a coherent or chaotic manner, and a macroeconomic environment, unfriendly or conducive to investment. The crossing of these factors identifies four areas that were the basis for the following development scenarios. The „Poland pioneer” scenario assumes the business environment of the legitimacy and cost-effectiveness of the investment, which with the favorable state policy results in the construction of the first HTR reactor. The “Atomic drift” scenario points to inadequate management and erroneous decisions at political levels that, despite high interest in HTR technology among utilities and consumers, continued work on this project is still postponed for the future. The „Poland without atom” scenario assumes a lack of interest among investors in connection with the passive attitude of the political environment, which leads to the abandonment of further work on the HTR technology. On the other hand, it is assumed in the „Upstream” scenario that despite the professional approach of the government in the development of HTR technology, the lack of investors and interested customers makes the project significantly delayed in time and there is no certainty that it will ever be finalized.
Źródło:
Polityka Energetyczna; 2018, 21, 1; 37-49
1429-6675
Pojawia się w:
Polityka Energetyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development on AI optimizing technology of NC program using tool free-cutting temperature for turning
Autorzy:
Tanabe, Ikuo
Isobe, Hiromi
Powiązania:
https://bibliotekanauki.pl/articles/2212054.pdf
Data publikacji:
2023
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
NC program
correction
free-cutting temperature
high productivity
tool condition
Opis:
In recent years, manufacturing must not only focus on high precision and productivity, but also on saving energy, resources and the environment. At the same time, there are increasing demands for high quality, high grade, wear resistance, heat-resisting property and high rigidity in machining workpieces. Therefore, for example, when creating NC programmes for machining difficult-to-machine materials such as titanium alloys and nickel alloys used in the aerospace industry, it has been very difficult to determine their optimum cutting conditions and create highly productive NC programmes due to lack of experience. Therefore, an AI optimizing technology of NC program using tool free-cutting temperatures for turning was developed and evaluated. The turning was used for this research and neural networks were used for AI optimizing. The algorithm for optimizing NC program using tool free-cutting temperature was firstly developed. Then the AI optimizing program for NC program was developed by C programming language. Previous NC program can rewrite for optimum condition by using the AI optimizing program. The proposed AI optimizing technology of NC program was evaluated by the several experiments. It is concluded from the results that; (1) The AI optimizing program for NC programmes using tool free-cutting temperatures in turning was developed, (2) The developed program was very useful for high productivity, long tool life and environmentally friendly.
Źródło:
Journal of Machine Engineering; 2023, 23, 1; 57--70
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of low temperatures on the development of eggs of Ascaris suum Goeze, 1782
Autorzy:
Dziekonska-Rynko, J.
Jablonowski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/838482.pdf
Data publikacji:
2004
Wydawca:
Polskie Towarzystwo Parazytologiczne
Tematy:
development
Ascaris suum
low temperature
egg
Źródło:
Annals of Parasitology; 2004, 50, 3
0043-5163
Pojawia się w:
Annals of Parasitology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of low temperatures on the development of eggs of Ascaris suum Goeze, 1782
Autorzy:
Dziekońska-Rynko, J.
Jabłonowski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/2147549.pdf
Data publikacji:
2004
Wydawca:
Polskie Towarzystwo Parazytologiczne
Tematy:
development
Ascaris suum
low temperature
egg
Opis:
Eggs of A. suum were kept at -10 and -20'C for 12 weeks and subsequently incubated in a thermostat at 28°C. During the incubation, their development was checked every 5 days. It was found that storage at low temperatures slows down their development and reduces the number of eggs successfully completing their embryogenesis.
Źródło:
Wiadomości Parazytologiczne; 2004, 50, 3; 509-512
0043-5163
Pojawia się w:
Wiadomości Parazytologiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of temperature and relative humidity on the embryonic development and egg hatch in Ixodes [Pholeoixodes] hexagonus Leach, 1815 [Acari: Ixodida: Ixodidae]
Autorzy:
Sebesta, R.
Siuda, K.
Powiązania:
https://bibliotekanauki.pl/articles/837500.pdf
Data publikacji:
1998
Wydawca:
Polskie Towarzystwo Parazytologiczne
Tematy:
Ixodida
Ixodidae
humidity
temperature
Polska
Acari
Ixodes hexagonus
tick
egg
Źródło:
Annals of Parasitology; 1998, 44, 3
0043-5163
Pojawia się w:
Annals of Parasitology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bioecology of the larger grain borer [Prostephanus truncatus Horn]
Autorzy:
Pradzynska, A
Powiązania:
https://bibliotekanauki.pl/articles/66774.pdf
Data publikacji:
1999
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pest
humidity
temperature
grain borer
fecundity
development
Prostephanus truncatus
maize
larger grain borer
Opis:
The larger grain borer (Prostephanus truncatus Horn) is one of the most dangerous pests of stored maize in tropical and subtropical countries. The most favourable conditions for reproduction and development of this insect is temperature 26°C and the maize grain with the moisture content 15,1-16,6%. In the dry grain (below 10% of moisture content) its development is not possible.
Kapturnik olbrzymek (P. truncatus) jest poważnym szkodnikiem magazynowanej kukurydzy w tropikalnych i subtropikalnych krajach. W literaturze zagranicznej (polskiej brak) podawany jest jako szkodnik kukurydzy powodujący większe straty niż łącznie cała grupa tradycyjnych szkodników przechowalni. Mając do czynienia z tak groźnym szkodnikiem ziarna wydawało się, że celowe będzie przeprowadzenie badań nad rozwojem i płodnością kapturnika olbrzymka w różnych warunkach hydrotermicznych i pokarmowych. Najkorzystniejsze warunki do rozmnażania i rozwoju kapturnika to prowadzenie hodowli w temperaturze 26°C na ziarnie kukurydzy nawilżonej do 15,1 i 16,6% w kontrolowanej wilgotności względnej powietrza 85 i 100%. Prostephanus truncatus może rozwijać się w temperaturze 20°C tylko na ziarnie kukurydzy o wilgotności powyżej 12%. Kapturnik olbrzymek hodowany w warunkach klimatu umiarkowanego na ziarnie kukurydzy o wilgotności 12,0; 13,3 i 14,5% w temperaturze 32°C, wykazał bardzo niską rozrodczość . Stadia rozwojowe ciepłolubnego owada okazały się bardzo wrażliwe na skoki termiczne. W pomieszczeniu, w którym sprawdzano próby notowano temperaturę 20 ± 2°C. Na cienkiej, luźno ułożonej, warstwic produktu, zmielonego lub całego ziarna kukurydzy, nie obserwowano wylęgu chrząszczy potomnych, nie stwierdzono również składania jaj. Owady z rodziny kapturnikowatych (Bostrychidae), do której należy badany gatunek, potrzebują do rozmnażania i rozwoju twardej osłony nasiennej, ewentualnie zbitej warstwy produktu.
Źródło:
Journal of Plant Protection Research; 1999, 39, 2
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spatial and seasonal variability of sub-daily water temperature dynamics in the lowland agricultural catchment of the Wkra River
Autorzy:
Skorupa, Weronika
Łaszewski, Maksym A.
Powiązania:
https://bibliotekanauki.pl/articles/28411638.pdf
Data publikacji:
2023
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
river water temperature
thermal fluctuations
Mazovia
Central Poland
hourly variations
thermal conditions
Opis:
The paper concentrates on seasonal and spatial variations of sub-daily water temperature dynamics in lowland agricultural streams. Temperature monitoring was carried out in 24 sampling sites distributed along the tributaries of the Wkra River during the hydrological year 2021. Statistical analysis of the obtained data documented the highest water temperature dynamics in the morning, from 5:00 to 9:00 CEST, while the lowest - from 14:00 to 18:00 CEST. Seasonally, greater water dynamics were noted in the winter, expressed by a coefficient of variation reaching up to 100%. Spatially, the highest dynamics occurred in sites with the lowest proportion of riparian vegetation, while the lowest dynamics was related to higher catchment area. In the winter, the minimum daily values were recorded most frequently in the morning hours, while maximum values in the afternoon. A similar pattern was observed in the summer, but with much lower dispersion of the relative frequencies. It was found that in the winter, the dominant influence on temperature dynamics was exerted in the upstream catchment area, while in the summer, a negative relationship with riparian shade was marked. The findings suggest that the presence of riparian vegetation reduces diurnal dynamics of water temperature and is simultaneously extremely important in prolonging the duration of optimum fluctuation, responsible for the proper development of poikilothermic organisms.
Źródło:
Journal of Water and Land Development; 2023, 59; 153--163
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The application of in vitro cattle embryo production system to study the influence of elevated temperature on oocyte maturation, fertilization and early embryonic development
Autorzy:
Rynkowska, A.
Rapala, L.
Trzeciak, P.
Duszewska, A.M.
Powiązania:
https://bibliotekanauki.pl/articles/80225.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
antioxidant
apoptosis
cattle
embryo
embryonic development
female reproductive system
fertilization
glutathione
heat shock protein
Hsp70 protein
hyperthermia
in vitro
oocyte
oocyte maturation
sperm
temperature
Źródło:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology; 2011, 92, 1
0860-7796
Pojawia się w:
BioTechnologia. Journal of Biotechnology Computational Biology and Bionanotechnology
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies