Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "eco-friendly" wg kryterium: Wszystkie pola


Tytuł:
Eco-friendly methods of protecting flax against weeds
Autorzy:
Praczyk, M.
Heller, K.
Powiązania:
https://bibliotekanauki.pl/articles/54995.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
dose reduction
herbicide
weed
proecological weed control
fibre flax
plantation protection
flax
herbicide rotation
weed control
Opis:
In cultivation of fibre flax the main yield is the fibre yield. This raw material, owing to its „processing-using” properties, belongs to so called ecofibres or green fibres. Thus, development of eco-friendly (also “plant-friendly”) technologies of using pesticides (including herbicides) seems necessary. Protection of flax plantations against weeds should combine efficiency and ecofriendly system of applying herbicides. Research done at the Institute of Natural Fibres in Poznań was focused on these issues. The green technologies of protecting flax against weed infestation comprise: • Reducing the doses of chemical herbicides by using adjuvants, especially based on natural plant oils (e.g. Lenmix 800 EC contain flaxseed oil); • Reducing herbicide doses by precise time of the treatment; • Applying repeated treatments with lower doses of herbicides (split application); • Precise application based on the analysis of weed infestation on field – the map of weed distribution; • Rotation of herbicides. Such a system allows for maintaining soil fertility, lowers environmental pollution and keeping pro-healthy properties of flax fibre.
Źródło:
Pestycydy; 2008, 3-4; 131-138
0208-8703
Pojawia się w:
Pestycydy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Projektowanie ekologicznych konstrukcji stalowych
Eco-friendly design steel construction
Autorzy:
Miczko, Marek
Zamorowski, Jan
Powiązania:
https://bibliotekanauki.pl/articles/2055945.pdf
Data publikacji:
2021
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja stalowa
projektowanie ekologiczne
rozwój zrównoważony
norma
LCA
ocena cyklu życia
ocena wielokryterialna
LEED
BREEAM
ocena środowiskowa
stal
technologia BIM
steel structure
ecological design
sustainable development
standard
life cycle assessment
multicriteria evaluation
environmental assessment
steel
BIM technology
Opis:
W artykule przedstawiono problematykę dotyczącą ekologicznego projektowania konstrukcji stalowych. O tym, czy konstrukcja może zostać uznana za ekologiczną, decydują kryteria zrównoważonego rozwoju. Przedstawiono założenia filozofii zrównoważonego rozwoju oraz narzędzie normowe umożliwiające ocenę stopnia zrównoważoności obiektu budowlanego. Jest nim metoda „oceny cyklu życia” (z ang. LCA - Life Cycle Assessment), którą można stosować w ocenie całego obiektu, jak i pojedynczych materiałów lub technologii. Coraz bardziej popularne w Polsce stają się wielokryterialne systemy oceny środowiskowej budynków. Projektując stalowy obiekt, należy mieć na uwadze cały cykl jego istnienia.
The article presents the issues related to ecological design of steel structures. The criteria of sustainable development determine whether a structure can be considered ecological. The assumptions of the philosophy of sustainable development and a standard tool enabling the assessment of the degree of sustainability of a building structure were presented. It is the „Life Cycle Assessment” (LCA) method, which can be used in the assessment of the entire facility as well as individual materials or technologies. Multi-criteria environmental assessment systems for buildings are becoming more and more popular in Poland. When designing a steel object, one should take into account its entire life cycle.
Źródło:
Przegląd Budowlany; 2021, 92, 11-12; 81--85
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Projektowanie ekologicznych konstrukcji stalowych
Eco-friendly design steel construction
Autorzy:
Miczko, Marek
Zamorowski, Jan
Powiązania:
https://bibliotekanauki.pl/articles/2055968.pdf
Data publikacji:
2021
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
konstrukcja stalowa
projektowanie ekologiczne
rozwój zrównoważony
norma
LCA
ocena cyklu życia
ocena wielokryterialna
LEED
BREEAM
ocena środowiskowa
stal
technologia BIM
steel structure
ecological design
sustainable development
standard
life cycle assessment
multicriteria evaluation
environmental assessment
steel
BIM technology
Opis:
W artykule przedstawiono problematykę dotyczącą ekologicznego projektowania konstrukcji stalowych. O tym, czy konstrukcja może zostać uznana za ekologiczną, decydują kryteria zrównoważonego rozwoju. Przedstawiono założenia filozofii zrównoważonego rozwoju oraz narzędzie normowe umożliwiające ocenę stopnia zrównoważoności obiektu budowlanego. Jest nim metoda „oceny cyklu życia” (z ang. LCA - Life Cycle Assessment), którą można stosować w ocenie całego obiektu, jak i pojedynczych materiałów lub technologii. Coraz bardziej popularne w Polsce stają się wielokryterialne systemy oceny środowiskowej budynków. Projektując stalowy obiekt, należy mieć na uwadze cały cykl jego istnienia.
The article presents the issues related to ecological design of steel structures. The criteria of sustainable development determine whether a structure can be considered ecological. The assumptions of the philosophy of sustainable development and a standard tool enabling the assessment of the degree of sustainability of a building structure were presented. It is the „Life Cycle Assessment” (LCA) method, which can be used in the assessment of the entire facility as well as individual materials or technologies. Multi-criteria environmental assessment systems for buildings are becoming more and more popular in Poland. When designing a steel object, one should take into account its entire life cycle.
Źródło:
Przegląd Budowlany; 2021, 92, 11-12; 81--85
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
PROEKOLOGICZNE ROZWIĄZANIA W OBIEKTACH HOTELARSKICH
ECO-FRIENDLY SOLUTIONS FOR HOTELS
Autorzy:
Kłos, Anna
Powiązania:
https://bibliotekanauki.pl/articles/475954.pdf
Data publikacji:
2013
Wydawca:
Wyższa Szkoła Turystyki i Języków Obcych. Wydawnictwo WSTiJO
Tematy:
proekologiczne rozwiązania
SZŚ
ekoetykiety
społeczność lokalna
Eco-friendly solutions
EMS
ecolabelling
local community
Opis:
Celem pracy jest przedstawienie proekologicznych rozwiązań w hotelarstwie oraz wynikających z nich korzyści. W wyniku wprowadzenia do polityki firmy proekologicznych narzędzi, takich jak systemy zarządzania środowiskowego (environmental management systems) czy ekocertyfikaty (ecolabels), następuje wiele wymiernych korzyści. Największymi zaletami jest wzrost konkurencyjności na rynku, pobudzenie świadomości ekologicznej zarówno wśród klientów jak i pracowników oraz znaczne obniżenie kosztów stałych. Efekty te można uzyskać również wprowadzając pojedyncze proekologiczne rozwiązania z zakresu odpowiedzialnego gospodarowania wodą, energia elektryczną, produktami oraz odpadami, współpracując z ludnością lokalną, jak również wykorzystując odnawialne źródła energii. Mimo, iż wszelkie powyższe działania pochłaniają wiele pieniędzy, nie można mówić o kosztach, lecz inwestycji długoterminowej./ALBO Wszelkie powyższe działania to nie koszta, lecz inwestycja długoterminowa.
The aim of this study is to provide eco-friendly solutions in the hotel industry and the benefits which they bring. As a result of the introduction of environmental policy instruments, such as environmental management systems and ecolabels, there is a lot of tangible benefits. The biggest advantages is to increase the competitiveness of the market, stimulate environmental awareness among customers and employees, and a significant reduction in fixed costs. These profits can also be achieved by introducing a single environment-friendly solutions into the responsible management of water resources, electric energy, products and waste, working with the local population, as well as the use of renewable sources of energy. Although all these activities consume a lot of money, you can not talk about the cost, but long-term investment. / All these activities are a long-term investment rather than a cost.
Źródło:
Zeszyty Naukowe. Turystyka i Rekreacja; 2013, 1(11)
1899-7228
Pojawia się w:
Zeszyty Naukowe. Turystyka i Rekreacja
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Emulsifiers from renewable materials: an eco-friendly synthesis and properties
Autorzy:
Szeląg, H.
Sadecka, E.
Pawłowicz, R.
Kuziemska, A.
Powiązania:
https://bibliotekanauki.pl/articles/778770.pdf
Data publikacji:
2013
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
fatty acid esters
polyglycerols
nonionic surfactants
emulsifiers
renewable fatty raw materials
Opis:
The focus of this study was the preparation of novel bio based polyglycerol emulsifiers characterized by a one pot synthesis, thus by modified properties with respect to interfacial activity and effectiveness as emulsion stabilizers. The final products of the esterification process, carried out in the presence of carboxylates were used directly as emulsifiers (without purification or fractionation). Polyglycerol emulsifiers obtained in proposed conditions can be tailored to stabilize the defined emulsion system. The modification of the surface activity of emulsifiers may be obtained by programming the fatty acid acyl group in the polyglycerol ester as well as the hydrocarbon chain length in sodium soap and concentration of this compound in the reaction mixture.
Źródło:
Polish Journal of Chemical Technology; 2013, 15, 2; 128-135
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sustainable Buildings. Development of Low Energy and Eco-Friendly Constructions
Autorzy:
Krawczyk, Dorota Anna
Bazzocchi, Frida
Brachi, Camilla
Cannone, Lapo
Ciacci, Cecilia
Di Naso, Vincenzo
Miceli, Serena
Mickevičienė, Vaiva
Ołtarzewska, Agata
Rodero Serrano, Antonio
Vaičienė, Marija
Valori, Aurora
Żukowski, Mirosław
Siuta-Olcha, Alicja
Javier Rey Martinez, Francisco
Powiązania:
https://bibliotekanauki.pl/books/2159264.pdf
Data publikacji:
2022-12
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Opis:
Monografia „Zrównoważone budownictwo – rozwój budownictwa niskoenergetycznego i ekologicznego” powstała w wyniku współpracy naukowej wykładowców i badaczy z europejskich uczelni: Politechniki Białostockiej (Polska), Uniwersytetu w Kordobie (Hiszpania), Uniwersytetu we Florencji (Włochy) oraz Wileńskiej Szkoła Technologii i Projektowania (Litwa). Zespół autorów obejmuje zarówno profesorów o uznanym dorobku naukowym, nauczycieli współpracujących z sektorem przemysłowym, jak też doktorantów rozpoczynających karierę zawodową. Publikacja powstała w wyniku pracy w projekcie ADD_ON_SKILLS (2020-1-PL01-KA226-HE-095244) realizowanym w ramach programu Erasmus+. W ostatnich latach obserwujemy znaczące zmiany w sektorze energetycznym i budowlanym. Zarówno wymagania prawne, jak i oczekiwania użytkowników w zakresie oszczędności energii oraz stosowania ekologicznych materiałów i rozwiązań, skutkują nowym podejściem do nowych i istniejących budynków.
Dostawca treści:
Biblioteka Nauki
Książka
Tytuł:
Eco-Friendly Soaking Process Using Tannic Acid as an Alternative Bactericide
Autorzy:
Zengin, A. C. A.
Çolak, S. M.
Zengin, G.
Kiliç, E.
Powiązania:
https://bibliotekanauki.pl/articles/204698.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bactericidal
leather industry
soaking
tannic acid
środek bakteriobójczy
przemysł skórzany
moczenie
tanina
Opis:
Eco-friendly leather processes based on the usage of natural products have become a potentially attractive issue for leather industry during the last few decades. Synthetic protective chemicals like bactericides used in most soaking process are known as hazardous substances and cause tannery effluents with high concentrations of Chemical Oxygen Demand (COD). In the present study, the effect of tannic acid on microorganisms, skin, wool and effluent were investigated in order to demonstrate the applicability of tannic acid in soaking process instead of commonly used bactericides. The bacterial load (cfu/ml), COD and Nitrogen Content (N) of the soaking effluents and Total Kjeldahl Nitrogen (TKN) content of skins and wools were investigated. Application of 0.5 and 1 wt% tannic acid concentrations was more effective than commercial bactericide, while comparable results were achieved by 0.1 and 0.3 wt% tannic acid. The application of tannic acid for soaking process resulted in lower COD and N values of effluents. The results show that tannic acid has the potential to be an alternative, eco-friendly bactericide for leather industry by reducing the pollution of leather soaking process.
Źródło:
Archives of Environmental Protection; 2014, 40, 1; 3-12
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study on fungi inhabiting indoor woods and their eco-friendly management
Autorzy:
Tapwal, A.
Kalyan, P.
Kumar, S.
Chandra, S.
Powiązania:
https://bibliotekanauki.pl/articles/11389.pdf
Data publikacji:
2016
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Źródło:
International Letters of Natural Sciences; 2016, 59
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efficient removal of imidacloprid pesticide by two eco-friendly activated carbons
Autorzy:
Mohammad, Somaia Gaber
El-Refaey, Ahmed A.
Powiązania:
https://bibliotekanauki.pl/articles/27312663.pdf
Data publikacji:
2023
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
activated carbon
hazelnut
imidacloprid
pesticide
regeneration
removal
walnut
Opis:
In this study, the removal of imidacloprid (IMD) pesticide onto activated carbon produced from nut shells of hazelnut (HAC), and walnut (WAC) has been investigated. The prepared activated carbons were characterised by total carbon, nitrogen and hydrogen content, surface areas and pore volume. Fourier-transform infrared (FTIR), and scanning electron microscopy (SEM) were studied before and after adsorption experiments. Effects of adsorbent dose (0.02-0.2 g), contact time (10-120 min), initial imidacloprid concentration (10-100 mg∙dm-3), and pH (1-8), and temperatures (25-50°C) on the removal of IMD pesticide by HAC and WAC in the batch mode were studied. The removal percentage of imidacloprid pesticide by HAC and WAC was 93.79% and 94.72%, respectively. The study showed that the pseudo-second-order kinetics model fitted well for both activated carbons. Moreover, adsorption isotherm results were evaluated using Freundlich, Langmuir and Temkin isotherm models. The adsorption results correlated well with the Langmuir isotherm model (R2 = 0.987 and 0.964) with maximum adsorption capacities of 76.923 and 83.333 mg∙g-1 for HAC and WAC, respectively, and an equilibrium time within 120 min. The nature of the adsorption of imidacloprid pesticide onto HAC and WAC is exothermic, spontaneous and physical in nature. The two prepared activated carbons (HAC, WAC) were successfully regenerated for three cycles and could be used as an effective and low-cost adsorbent for the removal of IMD pesticide from aqueous solutions. The production of the activated carbons of HAC and WAC will provide minimisation of these wastes in the environment.
Źródło:
Journal of Water and Land Development; 2023, 57; 220--230
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Eco-Friendly Principles on the Extraction of Humic Acids Intensification from Biosubstrates
Autorzy:
Malyushevskaya, Antonina
Koszelnik, Piotr
Yushchishina, Anna
Mitryasova, Olena
Mats, Andrii
Gruca-Rokosz, Renata
Powiązania:
https://bibliotekanauki.pl/articles/2202369.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
eco-friendly technology
environmental security
extraction
electric discharge
humic acid
biosubstrate
peat
Opis:
It is necessary to find innovative ways to improve the environmental performance of production processes and products. The technology of extracting valuable components from raw materials of plant origin is often used in technological processes of the food, pharmaceutical, chemical and other industries. Extraction is the most energy intensive step. The factors contributing to the extraction of humic acids from plant substrates under the action of electric discharge were studied. The purpose of the work was to study the efficiency of humic acids extraction from the biosubstrate under the action of electric discharges. The physical experiment showed that the main factor influencing the intensity of extraction is the degree of grinding of the solid phase of the biosubstrate-water suspension. The efficiency of electric discharge grinding depends on the pressure amplitude at the distance of the inner radius of the chamber and the number of discharge pulses. It was established that the number of chemical reagents (alkalis), usually used in the process of extracting humic acids from peat, can be reduced many times due to the appearance of radicals and peroxide compounds in the peat-water suspension resulting from the action of an electric discharge. The prospects of the non-thermal electric discharge method of intensification of the extraction of humic acids from biosubstrates were determined.
Źródło:
Journal of Ecological Engineering; 2023, 24, 2; 317--327
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluating eco-friendly botanicals (natural plant extracts) as alternatives to synthetic fungicides
Autorzy:
Al-Samarrai, G.
Singh, H.
Syarhabil, M.
Powiązania:
https://bibliotekanauki.pl/articles/49699.pdf
Data publikacji:
2012
Wydawca:
Instytut Medycyny Wsi
Źródło:
Annals of Agricultural and Environmental Medicine; 2012, 19, 4
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sustainable buildings. Designing and management of cost-effective and eco-friendly systems
Autorzy:
Krawczyk, Dorota Anna
Tejero-González, Ana
Cholewa, Tomasz
Data publikacji:
2022
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Opis:
The monograph “Sustainable buildings – designing and management of costeffective and eco‐friendly systems” has been developed as the result of scientific cooperation between lecturers and researchers from European universities: Bialystok University of Technology (Poland), the University of Cordoba (Spain), Rezekne Academy of Technologies (Latvia) and Vilnius College of Technologies and Design (Lithuania). The authors’ team includes professors with recognized scientific achievements, teachers who cooperate with the industrial sector as well as PhD students starting their career path. The cooperation was possible thanks to joint work in the ADD_ON_SKILLS project (Advanced Digital Design course ON modern buildings developing SKILLS for young engineers, 2020‐1‐PL01‐KA226‐HE‐095244) carried out within the framework of Erasmus+ programme. Sustainable buildings should be planned and managed using available, innovative technologies and systems. It is immensely important to implement modern solutions in the early stage of building design.
Dostawca treści:
Biblioteka Nauki
Książka
Tytuł:
Synthesis and Characterization of Slag-Sludge-Based Eco-Friendly Materials – Industrial Implications
Autorzy:
Lagrani, Saadia
Aziz, Ayoub
Bellil, Abdelilah
Felaous, Khadija
Achab, Mohammed
Fekhaoui, Mohamed
Powiązania:
https://bibliotekanauki.pl/articles/2202346.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
geopolymer mortar
non-incinerated sewage sludge
blast furnace slag
construction material
Opis:
Currently in Morocco, wastewater treatment plants (WWTPs) generate huge quantities of sludge from wastewater treatment. This sludge is a real concern for the environment. No regulatory text takes into account the future and management of sludge, its use in agriculture is not officially authorized and the solutions currently implemented for its elimination or recovery are done on an ad hoc basis and pose a number of difficulties for operators. The objective of the present study is to investigate the stabilization and solidification of a geopolymer based on sewage sludge and blast furnace slag (slag), as well as the possibility to use this geopolymer as a thermal insulation material. The sludge used comes from the AIN AOUDA-activated sludge type WWTP, the collected sludge is dehydrated and stabilized by slaked lime (Ca(OH)2) in the sludge treatment process. The blast furnace slag (slag) came from the plant in France. Four samples were prepared by substituting the slag with quantities (10 to 40%) of limed sludge, a quantity of sand, and a solution of sodium silicate and sodium hydroxide used as an alkaline activator. The effect of limed sludge on the physicochemical and microstructural properties of the synthesized geopolymers was evaluated using several analytical techniques, such as compressive strength, P-wave velocity, density and porosity tests, and X-ray diffraction. The results showed that the addition of 10 to 40% of limed sludge resulted in a progressive decrease in the compressive strength of the synthesized geopolymer and an increase in the thermal conductivity, which allows the use of the synthesized geopolymer as a material.
Źródło:
Journal of Ecological Engineering; 2023, 24, 1; 227--238
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New Eco-friendly Method for Paper Dyeing
Nowa, proekologiczna metoda barwienia papieru
Autorzy:
Blus, K
Czechowski, J
Koziróg, A
Powiązania:
https://bibliotekanauki.pl/articles/234110.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
paper dyeing
reactive dyes
retention agents
biocidal properties
pulp dyeing
reative dye derivatives
3’-carboxypyridinetriazine
przemysł papierniczy
barwienie papieru
barwniki reaktywne
środki retencyjne
właściwości biobójcze
pulpa
3'-carboxypyridinetriazine
Opis:
For economical and environmental reasons, the paper industry has shifted the production of paper products towards dyed products made from pulp grades with a high content of recovered paper. The basic method for dyeing paper products is pulp colouring with direct and basic dyes. Disadvantages of this method include coloured white water and so-called „bleeding” processes when using those products. „Bleeding” processes are undesired when using tissue products. A new eco-friendly method for dyeing pulp with adducts of reactive dyes and selected cationic aliphatic polyamine compouds was developed. A reactive dye is added to refined pulp and then a cationic polyamine compound. The dyeing substance is adsorbed on the entire surface of refined cellulose based semi finished products in a water medium with a pH near to neutral. After web consolidation, an uniform dye penetrated paper product is obtained, with high colour life and strength. Reactive dyes contain 3’-carboxypyridine-1,3,5-triazine systems that react with cellulose in a medium near to neutral and at a temperature similar to web drying. As polyamine compounds, polycondensates of guanidine with hexamethylene-1.6-diamine and octamethylene-1,8-diamine were used. As was proved by a test done on coloured paper, these compounds are characterised by bactericidal and fungicidal properties, which are advised for tissue paper. The polyamine compounds mentioned cause the quantitative adsorption of dyes on cellulose based pulp, increasing the retention of cellulose fibre fines, and the white water is practically colourless. In principle, this dyeing method does not change the strength, optical, structural and dimensional properties of selected paper products.
Ze względów ekonomiczno-ekologicznych przemysł papierniczy przestawił produkcję wyrobów papierniczych na barwne wyroby wytwarzane z mas papierniczych z dużym dodatkiem makulatury. Główną metodą barwienia wyrobów papierniczych jest barwienie masy barwnikami bezpośrednimi i zasadowymi. Wadą tej metody często są zabarwione wody podsitowe oraz tzw. procesy „krwawienia” w czasie użytkowania wyrobów. Procesy „krwawienia” są niepożądane w czasie użytkowania wyrobów higienicznych {produkty tissue). Opracowano nową proekologiczną metodę barwienia włóknistej masy papierniczej adduktami barwników reaktywnych i kationowych wyselekcjonowanych alifatycznych związków poliaminowych. Do zmielonej masy papierniczej jest dodawany barwnik reaktywny a następnie kationowy związek poliaminowy. Substancja barwiąca jest adsorbowana na całej powierzchni zmielonych półproduktów celulozowych w środowisku wodnym o pH zbliżonym do obojętnego. Po procesie konsolidacji wstęgi papierniczej otrzymuje się równomiernie przebarwiony wyrób papierniczy o dużej żywości i intensywności barwy. Barwniki reaktywne zawierają układy 3’-karboksypirydynotriazynowe wiążące się z celulozą w środowisku zbliżonym do obojętnego, w temperaturze zbliżonej do suszenia wstęgi papierniczej. Jako związki poliaminowe zastosowano polikondensaty guanidyny z heksametyleno-1,6-diaminą oraz oktametyleno-1,8-diaminą. Wymienione związki charakteryzują się właściwościami bakterio- i grzybobójczymi, co potwierdziły badania wykonane na wybarwionych papierach. Tego typu właściwości są wskazane w przypadku stosowania papierów higienicznych. Wymienione związki poliaminowe powodują praktycznie ilościową adsorpcję barwników na masie celulozowej, zwiększając jednocześnie zatrzymanie drobnych frakcji włókien celulozowych. Wody podsitowe są praktycznie bezbarwne. Ten sposób barwienia nie zmienia w zasadniczy sposób właściwości wytrzymałościowych, strukturalno-wymiarowych i optycznych wybranych wyrobów papierniczych.
Źródło:
Fibres & Textiles in Eastern Europe; 2014, 5 (107); 121-125
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of Eco-friendly Protective Compounds to Increase Crack Resistance of Timber Structures
Autorzy:
Shkarovskiy, Alexander
Mironova, Stefania
Mamedov, Shirali
Danilov, Egor
Powiązania:
https://bibliotekanauki.pl/articles/2174901.pdf
Data publikacji:
2022
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
timber structure
crack resistance
durability
eco-friendly material
protective material
Opis:
The paper presents the research results on using eco-friendly impregnation materials to reduce cracking in load-bearing timber elements. The behaviour of pine elements was studied when impregnation materials based on linseed oil were used. Statistical data are given on the reduction in the growth rate of the length and width of cracks, dependent on the number of protective layers of the finishing material. The effect of the absence of cracks on timber elements during atmospheric drying is described, considering the use of a three-layer paint and varnish coating. The effect of the increase in timber structures’ durability and corresponding cost and material consumption reduction in timber structures have been proven.
Źródło:
Rocznik Ochrona Środowiska; 2022, 24; 74--82
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Eco-friendly production of metal nanoparticles immobilised on organic monolith for pepsin extraction
Autorzy:
Alzahrani, Eman
Alkhudaidy, Ashwaq T.
Powiązania:
https://bibliotekanauki.pl/articles/779639.pdf
Data publikacji:
2020
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
polymer monolith
immobilization
metal nanoparticles
pepsin purifi cation
Opis:
Polymer monoliths modified by using nanoparticles (NPs) integrate high NP specific surface area with different monolith surface chemistry and high porosity. As a result, they have extensive applications within different fields, whereas nanomaterial-functionalised porous polymer monoliths have elicited considerable interest from investigators. This study is aimed at fabricating organic polymer-based monoliths from polybutyl methacrylate-co-ethylenedimethacrylate (BuMA-co-EDMA) monoliths prior to immobilization of gold or silver metal on the pore surface of the monoliths using reducing reagent (extracts of lemon peels). This was intended to denote a sustainable technique of immobilizing nanoparticles that are advantageous over physical and chemical techniques because it is safe in terms of handling, readily available, environmentally friendly, and cheap. Two different methods were used in the study to effectively immobilize nanoparticles on monolithic components. The outcomes showed that soaking the monolith rod in the prepared nano solution directly and placing it within ovens at temperatures of 80o C constituted the most effective method. Characterisation of the fabricated monolith was undertaken using SEM/EDX analysis, UV-vis. spectra analysis, and visual observation. The SEM analysis showed that nanoparticles were extensively immobilised on the surface polymers. Another peak was attained through EDX analysis, thus confirming the Au atom existence at 2.83% alongside another peak that proved the Ag atom existence at 1.92%. The fabricated components were used as sorbents for purifying protein. The ideal performance was achieved using gold nanoparticles (GNPs) immobilised organic monolith that attained a greater pepsin extraction recovery compared to silver nanoparticles (SNPs) immobilised organic monoliths alongside bare organic-based monolith.
Źródło:
Polish Journal of Chemical Technology; 2020, 22, 1; 18-28
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Resource Saving and Eco-Friendly Technology for Disposal of Used Railroad Engine Oils
Autorzy:
Zelenko, Yuliia
Bezovska, Maryna
Kuznetsov, Valeriy
Muntian, Antonina
Powiązania:
https://bibliotekanauki.pl/articles/1811621.pdf
Data publikacji:
2020
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
waste
engine oils
railway enterprises
restoration
treatment scheme
Opis:
The article deals with the problems of handling used motor oils on the railways of Ukraine. At the moment, this waste is transferred to other enterprises for disposal. But, based on international experience, it is advisable to be regenerated directly at the enterprise where it is formed. The purpose of this work is to develop a modern scheme for oil waste disposal. In this regard, various indicators were investigated, reflecting both the operational suitability of oils and their toxicological parameters. As a result, we proposed a scheme and selected special equipment for handling the used engine oils, which allows to reduce the technogenic load associated with their accumulation, handling and minimization, contributes to the return of oil to the technological process. The calculated value of the conditional environmental effect and the approximate payback period allowed us to draw conclusions about the undoubted environmental and economic effect of implementing the proposed scheme.
Źródło:
Rocznik Ochrona Środowiska; 2020, Tom 22, cz. 1; 171-180
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Integrated Eco-Friendly Outdoor Cooling System – Case Study of Hot-Humid Climate Countries
Autorzy:
Bani Khalid, Mohammad
Beithou, Nabil
Al-Taani, M. A. Sh.
Andruszkiewicz, Artur
Alahmer, Ali
Borowski, Gabriel
Alsaqoor, Sameh
Powiązania:
https://bibliotekanauki.pl/articles/2025812.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
hot climate country
open area
air conditioning
micro-climate
humidity control
recreation area
Opis:
This research proposed an integrated eco-system for conditioning an outdoor public area (park or sport) in a hothumid environment. It is accomplished by the use of a dehumidifier control machine driven by renewable solar power; after which air is distributed throughout a ducting system. The system will harvest moisture from the air, utilize it for drinking water production and plants irrigation as well as deliver low temperature, low humidity ratio air for controlling the outdoor air, which results in a comfortable outdoor relative humidity and temperature (24 °C, 50% RH). The Integrated Eco-Friendly Cooling System (IEFCS) is a sustainable self-dependent in energy and water sources. It provides a positive impact on the microclimate of the site, assists in night illumination, supplies water for drinking, plant irrigation, and allows people to enjoy a thermally comfortable atmosphere. The advantages include low maintaining cost as well as the possibility to be scaled and implemented anywhere according to the selected location.
Źródło:
Journal of Ecological Engineering; 2022, 23, 1; 64-72
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stabilność wysokotemperaturowa ekologicznych rezystorów grubowarstwowych
High temperature stability of eco-friendly thick-film resistors
Autorzy:
Kiełbasiński, K.
Szałapak, J.
Krzemiński, J.
Młożniak, A.
Jakubowska, M.
Szostak, S.
Powiązania:
https://bibliotekanauki.pl/articles/192252.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Materiałów Elektronicznych
Tematy:
rezystory bezołowiowe
stabilność wysokotemperaturowa
lead-free resistors
high temperature stability
Opis:
W związku z Dyrektywą RoHS, która weszła w życie w 2006 roku producenci materiałów elektronicznych zostali zmuszeni do wyeliminowania m.in. ołowiu i jego związków ze składów tych materiałów. Dyrektywa wymusiła zmianę składu past służących do wytwarzania rezystorów grubowarstwowych szeroko rozpowszechnionych w konsumenckim sprzęcie elektronicznym. Autorzy zaproponowali nowatorskie pasty rezystywne zdolne w pełni zastąpić pasty oparte o ołów i jego związki. Ponadto zostały przeprowadzone badania odporności na narażenia termiczno-prądowe, które ujawniły przewagę użytkową w aspektach stabilności rezystancji na cykliczne narażenia temperaturowe nowych past wobec past tradycyjnych.
Under the EU directive on the Restriction of Hazardous Substances (RoHS) implemented in 2006, producers of electronics materials were obliged to eliminate lead and its compounds from the compsition of their products. As a consequence of this directive the changes affected the compositions of pastes used in the production of thick-film resistors, widely used in mass electronics. The authors have developed new compositions for the resistive thick film pastes, to replace the ones based on lead. Moreover, the thermal and electrical studies showed the advantage of the new ompositions over the traditional ones in terms of resistance stability under temperature cyclic test.
Źródło:
Materiały Elektroniczne; 2016, T. 44, nr 2, 2; 17-26
0209-0058
Pojawia się w:
Materiały Elektroniczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
PEG mediated eco-friendly one pot sunthesis of benzylamine coumarin derivatives using multicomponent reactant
Autorzy:
Viradiya, D. J.
Kotadiya, V. C
Khunt, M. D.
Baria, B. H.
Bhoya, U. C.
Powiązania:
https://bibliotekanauki.pl/articles/412545.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
one pot reaction
benzylamine coumarin derivative
green synthesis
PEG-400
Opis:
A green resourceful, eco-friendly and facile protocol was developed for the synthesis of benzylamine coumarin derivatives by the reaction of 4-hydroxy coumarin, secondary amine and aromatic aldehyde in the presence of PEG400 as a solvent as well as catalyst at room temperature. A wide range of functional groups were tolerated in the developed protocol. The structures of all the synthesized compounds were confirmed by 1H NMR, IR, MASS and Elemental Analysis. The target molecules were obtained in good to excellent yield applying this method.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2014, 11, 2; 177-184
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Material recovery as an opportunity of immediate introduction of eco-friendly transport system (vehicles)
Autorzy:
Wojciechowski, A.
Wołosiak, M.
Doliński, A.
Pietrzak, K.
Powiązania:
https://bibliotekanauki.pl/articles/244327.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
road transport
material recovery
environmental protection
thermolysis
alternative fuels
transport drogowy
odzysk materiału
ochrona środowiska
termoliza
paliwa alternatywne
Opis:
The article presents an analysis of the need to introduce pro-ecological solutions at the fuel sector of industry, resulting from dynamic economic development, and environment protection requirements. The forecasts on the number of vehicles in the world and the subsequent growth of interest in alternative fuels are presented. The advantages of using these fuels as compared to petroleum fuels and electricity are described. The presented analysis emphasizes the context of EU legislation on environmental requirements. At the same time, it was pointed out the need to obtain the required technical and energy characteristics of alternative fuels, the competitive costs of their production, and important environmental aspects. Taking into account these premises and the principle of circular economy closed circuit, alternative fuels from organic waste, in particular from enormous amounts of organic non-biodegradable wastes (packaging, multi-material fabric, rubber, tires) were proposed. It has been shown that thermal decomposition by thermolysis, described briefly in the article, can be a method suitable for a wide economic application within the alternative fuel production system. Based on literature data and own experience, it has been found that the quality of fuels (oil, gas) obtained from the thermal decomposition of organic and mixed waste is not different from the requirements for the best quality raw materials used in the production of petrol and may even exceed the properties of petroleum. Introduction of the system of regional production and distribution of alternative fuels from waste could be remarkable driver of small towns and rural areas revitalization and development, while supporting build up and improvement of local communities.
Źródło:
Journal of KONES; 2018, 25, 1; 465-474
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterisation and Reverse Engineering of Eco-Friendly Historical Mortar: Qasr Tuba, Desert Castles in Jordan
Autorzy:
Ghrair, Ayoup M.
Said, Adi J.
Aldaoud, Naela
Miqdadi, Riham
Ahmad, Ahmad A. L.
Powiązania:
https://bibliotekanauki.pl/articles/1839137.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
mortar
grog
lime
gypsum
Qasr Tuba
compressive strength
flexural strength
eco-friendly
historical restoration
Opis:
The purpose of this study was to investigate the mineral composition of the historical mortars of Qasr Tuba and to re-produce them for the restoration process. The mortar samples were collected from the foundation and walls of Qasr Tuba. The chemical and mineral composition of the mortar was determined using several techniques. In addition, the quantitative minerals content was recalculated for the mortar samples utilizing the material balances equation. Moreover, 12 mixtures of mortar were prepared and tested for fresh and hardened properties, according to their respective national and international standards. The results revealed that two types of mortar were used: (i) the lime-based mortar was used for the foundation and joint mortars in the lower parts of the building walls with a gypsum-hydrated lime ratio of 1:3; and (ii) the gypsum-based mortar was used as joint mortar in the upper parts of the building walls for baked bricks at a gypsum-hydrated lime ratio of 4:1. A pozzolanic reaction in the Qasr Tuba mortar produced a new formation of Xonotlite, Stratlingite, and calcium aluminium hydrate as a secondary cementing mineral. In conclusion, the use of hydraulic lime mortar was considered for building an environment for capturing the CO2 gas.
Źródło:
Journal of Ecological Engineering; 2021, 22, 3; 121-134
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multi-Criteria Analysis and Design Ideas of Green Façade Systems as Eco-Friendly Architectural Solutions
Autorzy:
Kamińska, Patrycja
Michalak, Hanna
Powiązania:
https://bibliotekanauki.pl/articles/27314859.pdf
Data publikacji:
2023
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
green facade
innovation in architecture
urban greenery
aesthetics
eco-friendly solutions
modular system
zielona elewacja
innowacje w architekturze
zieleń miejska
estetyka
rozwiązania przyjazne środowisku
system modułowy
Opis:
The article discusses current trends in designing green and eco-friendly façades of buildings of different functions in Poland and around the world. Information collected on completed façade projects, associated research and conclusions formulated on the basis thereof, indicate trends and possibilities for the use of contemporary material solutions and technologies in designing various forms of vertical 'greenery’ which support sustainable development of urban areas. The main objective of the research was to identify the most important features of green façades as eco-friendly architectural solutions. A case study with descriptions of the features and qualitative elements of 100 of the most architecturally interesting buildings with characteristic external wall structures was constructed for research purposes. The sites selected for the case study represent a review of global trends. The data was then used for a multi-criteria analysis of green façade systems from the perspective of eco-friendly architectural solutions. The conducted research, analyses and discussions on solutions already in place were then implemented as guidelines for innovative architectural design solutions, which were presented at the Faculty of Architecture at Poznań University of Technology in the form of selected diagrams and student visualisations. These comprised highly aesthetic compositions, possible to implement in the near future.
Źródło:
Civil and Environmental Engineering Reports; 2023, 33, 4; 23--41
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Preliminary Tests of Innovative Eco-Friendly Furfuryl Resins and Foundry Sand Mixtures Based on These Resins
Autorzy:
Kamińska, Jadwiga
Puzio, Sabina
Angrecki, Michał
Stachowicz, Mateusz
Łoś, Anna
Powiązania:
https://bibliotekanauki.pl/articles/123922.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
loose self-hardening sand
furfuryl resin
environmental protection
mechanical tests
casting surface quality
Opis:
The foundry industry in Poland and EU member states is growing steadily. The alloys based on ferrous metals (cast steel and cast iron) largely contribute to this upward trend. Currently, foundries are facing the problem of increasing requirements, which enforce the production of castings characterized by high dimensional accuracy and surface smoothness with parallel elimination of casting defects. Castings are mostly made in moulding sand mixtures, which are also subject to more and more stringent requirements to meet the above-mentioned casting acceptance conditions. Additionally, moulding sands should ensure adequate mould stiffness to avoid the risk of dimensional deformations during the pouring of liquid metal to this mould and casting solidification. For these reasons, the production of this type of castings has been dominated by loose self-hardening sands with furfuryl resin, commonly called furan sands. In the group of self-hardening sands with synthetic resins, loose self-hardening sands with furfuryl resin enjoy the greatest popularity. What accounts for this fact is the high level of the reclamability of these sands, the possibility of obtaining castings with high dimensional accuracy, the ability to make intricate moulds and cores, the binding process taking place at ambient temperature, and low content of binder. Unfortunately, this technology also has some disadvantages, which include short lifetime of the sand mixture, harmful gases emitted from the sand, and currently also high cost of the sand mixture. The anticipated tightening of the environmental protection regulations in the EU countries, including limiting the content of free furfuryl alcohol in resins (<25% by mass) and reducing the emission of furfuryl alcohol, formaldehyde and BTEX compounds at workplaces, necessitated the development of a new generation of furfuryl resins friendly to the environment. The article compares the results of testing the strength properties of foundry moulding sands using two types of resins, i.e. the resin of a new generation synthesized by Grupa Azoty JRCh and a commercial resin used in the foundry industry. Additionally, derivatographic studies of the above mentioned sand mixtures were conducted, and the loss on ignition and the amount of gases emitted by the sand mixture were determined. Melting was also carried out to study the impact of the resin used on the surface quality of iron castings.
Źródło:
Journal of Ecological Engineering; 2019, 20, 9; 285-292
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of shifting towards eco-friendly transportation at the University of Baghdad, Al-Jadriya Campus (UBAC)
Autorzy:
Alrawi, Firas
Alali, Ali
Alaa, Sarah
Saad, Shurooq
Ameer, Araz
Powiązania:
https://bibliotekanauki.pl/articles/196626.pdf
Data publikacji:
2019
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
University of Baghdad
transportation
eco-friendly transportation
traffic congestion
emission
PCU
diesel bus
battery-electric buses
Uniwersytet w Bagdadzie
transport
transport przyjazny dla środowiska
korki uliczne
emisja
autobus z silnikiem diesla
autobus elektryczny
Opis:
In recent years, the UBAC has seen severe traffic congestion, resulting in various environmental and traffic problems at the university and its environs. This congestion was due to the significant expansions in buildings andan increase in the number of colleges in addition to the extensive use of private transport modes by students and university employees. This research was an attempt to find a solution for transportation problems in the UBAC, through studying the current transportation system inside the campus, and then suggesting alternatives to enhance the situation in the Campus and its environs as well. The study solutions focused on replacing the current diesel buses with battery-electric buses and restricting some of the private cars toward the Campus. This study supposes this transformation will reduce the CO2 emissions by (54%) in the morning peak hours and by (64%) in the afternoon peak hours, enhance the Passenger Car Unit (PCU) by (31%) in the morning peak hours and by (41%) in the afternoon peak hours, and will improve parking capacity by 114% inside the campus.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2019, 105; 5-14
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Removal of Fouling from Steel Plate Surfaces Based on Multi-Frequency Eco-Friendly Ultrasonic Guided Wave Technology
Autorzy:
Huang, Mingkun
Jin, Shuo
Nie, Gaoqian
Wang, Xiaopeng
Zhang, Quanpeng
An, Yang
Qu, Zhigang
Yin, Wuliang
Powiązania:
https://bibliotekanauki.pl/articles/31339786.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
fouling removal
cavitation
eco-friendly
ultrasonic guided waves
multi-frequency
Opis:
Fouling is inevitable on the surfaces of industrial equipment, especially on heat-exchanging surfaces in contact with fluids, which causes water pollution and destroys the ecological environment. In this paper, a novel fouling-removal methodology for plate structure based on cavitation by multi-frequency ultrasonic guided waves is proposed, which can remove fouling on stainless steel plates. A numerical simulation method has been developed to study the acoustic pressure distribution on a steel plate. According to the simulation results, the distribution of sound pressure on the plate under triple-frequency excitation is denser and more prone to cavitation than in single-frequency cases and dual-frequency cases, which improves fouling removal rate. The stainless steel plate is immersed in water for the descaling experiment, and the results show that the fouling removal rates of three water-loaded stainless steel plates under different single-frequency excitation seem unsatisfactory. However, the multi-frequency excitation improves the descaling performance and the removal rate of fouling reaches 80%. This new method can be applied to the surface descaling of large equipment plates, which is of great significance for purifying water quality and protecting the ecological environment.
Źródło:
Archives of Acoustics; 2023, 48, 4; 593-601
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Highly efficient and eco-friendly one-pot synthesis of penta substitute pyrrole derivatives under catalyst-free conditions
Autorzy:
Viradiya, D. J.
Baria, B. H.
Kakadiya, R.
Kotadiya, V. C.
Shah, A.
Powiązania:
https://bibliotekanauki.pl/articles/412605.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
one-pot synthesis
penta-substituted pyrrole derivatives
multi-component reactions
Opis:
An eco-friendly and efficient one-pot synthesis of penta-substituted pyrrole derivatives via a four-component reaction of maldrum’s acid, arylglyoxal monohydrate, dimethyl but-2-yne-dioate and amines under catalyst-free conditions in an environmentally friendly medium is described. The simple experimental procedure, catalyst-free reaction conditions, short period of conversion, and excellent yields are the advantages of the present method. Good chemical yields have been achieved without the need for chromatography and recrystallization or other purification methods.
Źródło:
International Letters of Chemistry, Physics and Astronomy; 2014, 11, 3; 257-264
2299-3843
Pojawia się w:
International Letters of Chemistry, Physics and Astronomy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of Selected Properties of Eco-Friendly Soybean and Other Fibres
Porównanie wybranych właściwości ekologicznych włókien sojowych
Autorzy:
Yilmaz, D
Karaboyaci, M
Kiliç, H
Kitapçi, K
Yelkovan, S
Powiązania:
https://bibliotekanauki.pl/articles/232900.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
soybean fibre
regenerated fibre
dyeing properties
biodegradable fibre
sustainable products
functional properties
flame resistance
błonnik sojowy
regenerowane włókno
właściwości barwienia
biodegradowalne włókna
zrównoważone produkty
właściwości funkcjonalne
ognioodporność
Opis:
Biodegradable and sustainable products are being employed to make contributions to efforts concerning environmental protection and the reduction of oil consumption. Biodegradable fibres present a simple and notable opportunity for providing sustainable textiles. Soybean fibre is a kind of regenerated and new-generation protein plant fibre. The present work aimed to analyse the many different properties of soybean fibres. Particularly it was focused on their performance, functional, comfort and dyeing properties. In literature, there are studies regarding soybean fibres but topics mostly involved the analysis of comfort properties of the fibre. In this study, fibre structure and composition, flame and UV resistance, strength, pilling behaviour, air and water vapour permeability, water absorption, drape and dyeing properties were studied. It was indicated that soybean fibre is capable of meeting the performance, comfort and functional requirements of classical and technical textile products. The fibre has many of the good qualities of natural fibres such as tenacity, moisture regain, soft-lustrous handle, dyeability and colour fastness properties, and also has some of the functional properties of synthetic fibres such as being flame retardant and anti-ultraviolet.
Produkty biodegradowalne i odnawialne są coraz powszechniej stosowane dla ochrony środowiska naturalnego i redukcji zużycia paliw. Takim problemem są włókna naturalne w tym sojowe, będące przykładem nowej generacji włókien proteinowych. W pracy przedstawiono analizę rożnych właściwości, w szczególności ich zastosowania, funkcjonalności komfortu użytkowania i wybarwialności. W literaturze znajduje się wiele publikacji związanych z komfortem produktów z włókien sojowych, natomiast w przedstawionych badaniach zwrócono uwagę na ich strukturę i skład a, także ich palność, odporność na promieniowanie UV, wytrzymałość, piling, przepuszczalność powietrza i pary wodnej, absorpcje wody, układalność i wybarwialność. Stwierdzono, że włókna sojowe mają wiele ważnych pozytywnych właściwości charakterystycznych dla innych włókien naturalnych.
Źródło:
Fibres & Textiles in Eastern Europe; 2015, 3 (111); 14-24
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Environment adult education as a part of the social security policy
Autorzy:
Tytarenko, Olga M.
Powiązania:
https://bibliotekanauki.pl/articles/1879442.pdf
Data publikacji:
2013
Wydawca:
Wyższa Szkoła Bezpieczeństwa Publicznego i Indywidualnego Apeiron w Krakowie
Tematy:
ecology
environment education
eco-friendly behavior
Opis:
Environmental adult education for community sustainability situates local knowledge within a global pedagogy and activism of survival. Practical and theoretical considerations of environmental popular education within indigenous people's social movements are explained, the environment and adult learning is explored. The aim of environmental adult literacy is to challenge scientific knowledge as the fundamental structure of learning, and to revalue people's experiential knowledge. A transformative ecological understanding of lifelong learning reconnects humans with nature and fosters social dialogue and action. Environmental adult education provides a rich and provocative discourse, and this article can be useful to readers seeking to connect social and ecological issues.
Źródło:
Security Dimensions; 2013, 10(10); 146-151
2353-7000
Pojawia się w:
Security Dimensions
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An evaluation of some eco-friendly biopesticides against Bemisia tabaci on two greenhouse tomato varieties in Egypt
Autorzy:
Abdel-Razek, Atef S.
Abd El-Ghany, Nesreen M.
Djelouah, Khaled
Moussa, Abdelhameed
Powiązania:
https://bibliotekanauki.pl/articles/961649.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bemisia tabaci
bio-rational insecticides
greenhouse
susceptibility tomato
Opis:
Th is study has two main approaches. First, it exploits the susceptibility of tomato cultivars as a prophylactic measure to detect auto resistance characters of the tested tomato varieties against Bemisia tabaci (Gennadius) (Homoptera: Aleyrodidae). Secondly, it evaluates the efficacy of different bio-rational insecticides against B. tabaci under greenhouse conditions. The results exhibited a special significance in B. tabaci infestation suitability between the two tomato varieties with a high infestation significance found in the Shifa F1 hybrid tomato variety compared to the Savera F1 hybrid tomato variety in the fi rst plantation period. Subsequently, in the second plantation period, there was a significant difference between the two tomato varieties. Bemisia tabaci showed a preference for the Shifa F1 hybrid over the Savera F1 hybrid tomato variety. Th ese diff erences occurred during the 1st, 2nd, 4th, 6th, 7th, 8th, and 10th weeks. In the experimental trial for the efficacy of eco-friendly biorational insecticides, spinosad, azadirachtin, Beauveria bassiana and Metarhizium anisopliae, there were significant differences between the treated and untreated plants during the two plantation periods. A high efficacy of spinosad on the B. tabaci population was found. Bemisia tabaci infestation under all the applications was reduced from 50 to 94.61% for the two plantation periods. This obvious decrease in B. tabaci population increase attention to benefits of the different bio-rational insecticides.
Źródło:
Journal of Plant Protection Research; 2017, 57, 1
1427-4345
Pojawia się w:
Journal of Plant Protection Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wool Fabric Treated with Eco-Friendly Insect Repellent
Obróbka tkaniny wełnianej przyjaznym dla środowiska środkiem odstraszającym owady
Autorzy:
Kreševič Vraz, S.
Vončina, B.
Powiązania:
https://bibliotekanauki.pl/articles/234411.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
wool
β-cyclodextrine
cedar oil
spectroscopy
gravimetry
moths
wełna
β-cyklodekstryna
olej cedrowy
spektroskopia
metoda grawimetryczna
mole
Opis:
In the research work presented, fabric made of wool was grafted with β-cyclodextrine (β-CD) using 1, 2, 3, 4 butanetetracarboxlic acid (BTCA) as a polyfunctional reagent. To reduce the grafting curing temperature, which could damage the wool fabric if too high, cyanamide (CA) in combination with ammonium dihydrogen phosphat (ADHP) were used as catalysts. The presence of cedar oil applied onto textile materials was determined by ATR FT-IR spectroscopy, as well as estimation of the add-on of cedar oil with the gravimetric approach, respectively. Finally the reduction in moths after being exposed to wool treated with a separate treatment formulation i.e. β-CD, cedar oil, and β-CD in combination with cedar oil was assessed visually after different time periods. Results showed that the wool after being treated with β-CD in combination with cedar oil shows significantly prolonged moth oppression activity compared to the wool treated with cedar oil only.
W pracy szczepiono tkaninę wełnianą b-cyklodekstryną (b-CD) przy użyciu kwasu 1, 2, 3, 4 butanotetrakarboksylowego (BTCA). W celu zmniejszenia temperatury utwardzania, która jeśli jest za wysoka, może uszkodzić tkaninę wełnianą, jako katalizatora użyto cyjanamidu (CA) w połączeniu z fosforem mono-amonowym (ADHP). Obecność oleju cedrowego na materiałach określono za pomocą spektroskopii ATR FT-IR, a dodatek oleju cedrowego oszacowano przy użyciu metody grawimetrycznej. Następnie oceniono wizualnie, po różnych okresach czasu, redukcję ilości motyli po ekspozycji na wełnę obrabianą b-cyklodekstryną, olejem cedrowym oraz środkiem powstałym z połączenia b-cyklodekstrynąy i oleju cedrowego. Stwierdzono, że wełna, po obróbce b-cyklodekstryną w kombinacji z olejem cedrowym wykazuje znaczne wydłużenie aktywności przeciwko molom w porównaniu z wełną obrabianą samym olejem cedrowym.
Źródło:
Fibres & Textiles in Eastern Europe; 2017, 4 (124); 102-105
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Current trends in the consumer behaviour towards eco-friendly products
Aktualne trendy w zachowaniach konsumentów wobec produktów ekologicznych
Autorzy:
Lorek, Agnieszka
Powiązania:
https://bibliotekanauki.pl/articles/435252.pdf
Data publikacji:
2015-06
Wydawca:
Uniwersytet Opolski
Tematy:
consumer behavior
green consumption
eco-friendly products
green market
Silesian Voivodeship
zachowania konsumentów
„zielona” konsumpcja
eko-produkty
„zielony” rynek
województwo śląskie
Opis:
Research on environmental liability issues were already taken in the 70s and 80s, when relatively few consumers were aware of the impact of products and services on the environment. Currently, "green consumption" (sustainable consumption) is a term commonly known and an important element of the "green consumerism" has become creating environmentally friendly consumption patterns. The main purpose of the article is to identification of current trends in the consumer behaviour towards “green” products on example of Silesian Voivodeship. In the first part of the article are presented trends in consumer behaviour on a green market in developed countries. The second part relates to the identification of consumer behaviour in relation to environmental goods and services in the Silesian province on the basis of surveys. Surveys were conducted among residents of the region in 1999/2000 and 2012/2014. The above analyses indicate that the trend to make purchase decisions based on ecological criteria is diminishing. The price is still the main criterion the respondents consider when shopping (above 80% of survey participants). An important motive for buying eco-friendly products are savings associated with using energy-efficient appliances. Currently, 37% of respondents declares buying organic food and the most important criterion in all rounds of the survey are health benefits. A positive tendency was observed with regard to the post-consumer waste management (according to the survey, waste is currently segregated in most households in Silesian Voivodeship) but significantly decreased the number of people repairing broken electronic equipment and appliances which contributes to increasing the quantity of such waste.
Badania nad problematyką odpowiedzialności środowiskowej były podejmowane już w latach 70. i 80. XX wieku, kiedy stosunkowo niewielu konsumentów miało świadomość jaki wpływ na środowisko wywierają produkty i usługi. Obecnie „zielona konsumpcja” (zrównoważona konsumpcja) jest terminem powszechnie znanym, a istotnym elementem tzw. „zielonego konsumeryzmu” stało się kształtowanie proekologicznych wzorców konsumpcji. Podstawowym celem artykułu jest identyfikacja trendów w zachowaniach konsumentów w stosunku do dóbr i usług ekologicznych na przykładzie województwa śląskiego. W pierwszej części artykułu przedstawiono tendencje w zachowaniach konsumentów na zielonym rynku w krajach wysoko rozwiniętych. Druga część dotyczy identyfikacji zachowań konsumentów w stosunku do dóbr i usług ekologicznych w województwie śląskim na podstawie badań ankietowych. Badania ankietowe były przeprowadzone wśród mieszkańców regionu w latach 1999/2000 i 2012/2014. Według wyników badań niezmiennie cena pozostaje głównym kryterium branym pod uwagę przy zakupach, maleje natomiast ilość osób kierujących się kryteriami ekologicznymi. Istotnym motywem zakupu „zielonych” produktów są oszczędności związane np. z używaniem energooszczędnych sprzętów AGD i elektroniki. 37% ankietowanych deklaruje obecnie zakup żywności ekologicznej, a najistotniejszym motywem przy takich zakupach są względy zdrowotne. Pozytywny trend został zaobserwowany odnośnie postępowania z odpadami (według wyników badań ankietowych segregacja ma miejsce w większości gospodarstw domowych w regionie śląskim) lecz znacząco spadła ilość osób naprawiających zepsuty sprzęt elektroniczny i AGD co przyczynia się do wzrostu ilości takich odpadów.
Źródło:
Economic and Environmental Studies; 2015, 15, 2(34); 115-129
1642-2597
2081-8319
Pojawia się w:
Economic and Environmental Studies
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Citric Acid as an Eco-Friendly Inhibitor for the EN AW-2024 Aluminum Alloy Corrosion in Acidic Medium
Autorzy:
Kamarska, Kalina
Powiązania:
https://bibliotekanauki.pl/articles/2202340.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
corrosion inhibition
aluminum alloy
citric acid
electrochemical technique
Opis:
The paper presents the results from a study on the possibility to use citric acid as an ecological inhibitor of corrosion in aluminum alloy EN AW-2024 in 0.5 М solution of H2SO4. The study has been carried out by using electrochemical techniques, such as open circuit potential and chronoamperometry. The results reveal that the presence of citric acid in the studied acid medium reduces the corrosion degree of the EN AW-2024 aluminum alloy. The inhibition efficiency increases together with increasing the concentration of the citric acid. The study shows that the citric acid can be used as an ecological inhibitor to fight corrosion in a solution of H2SO4.
Źródło:
Journal of Ecological Engineering; 2023, 24, 1; 307--311
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Eco Friendly Level of Mini Purse Seine Based on Catch Decapterus spp in Pekalongan Nusantara Fishing Port, Central Java, Indonesia
Autorzy:
Prasetyo, Adi
Hamdani, Herman
Astuty, Sri
Dewanti, Lantun P.
Powiązania:
https://bibliotekanauki.pl/articles/1109100.pdf
Data publikacji:
2018
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Decapterus spp.
Eco friendly
Mini purse seine
Opis:
Excessive exploitation of fish resources with the use of fishing gear that is not selective and not eco-friendly will have an impact on the sustainability of capture fisheries, and cause damage to fish resources and marine ecosystems. The mini purse seine is a fishing gear that is most widely used by fishermen in the sea of the north coast of Java. Research was undertaken the Nusantara Fisheries Port (PPN), Pekalongan. The purpose of this research is to analyze the level of eco friendliness of mini purse seine fishing based on the main catch, which is (Decapterus spp.). The research method used a survey method at PPN Pekalongan and follows the operation of 3 units of mini purse seine working the fishing ground on the North Coast of Central Java, in January-February 2018. Data taken included total catches, catch composition, diversity index and the size of the fork length. Data analysis used the proportion of the main catch and by-catch, as well as the proportion of fish worth catching and not catching. The results showed that the mini purse seine fishing gear caught 6 species with a total catch of 35,633 with a weight of 4,600 kg. The main catch is 51%, compared to 49% by-catch. The length of the main catch fish worth catching is 46% of all fish measured. Diversity index value is 1.42 (high diversity), based on a research mini purse seine operated in the the Java Sea. The results of our work indicate that mini purse seine fishing is not eco friendly - as seen from the criteria of catch composition.
Źródło:
World News of Natural Sciences; 2018, 21; 42-52
2543-5426
Pojawia się w:
World News of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A study on extending technologies lifespan for the environment safety
Autorzy:
Labidi, Amal
Tanabe, Ikuo
Takahashi, Satoshi
Powiązania:
https://bibliotekanauki.pl/articles/1428652.pdf
Data publikacji:
2021
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
Double-Eco model
eco-friendly
lifespan
lubrication
Opis:
In recent decades, the technological devices have become a big burden for the environment. In fact, the production processes are depleting the natural resources and the end-of-life processes are emitting big amounts of heavy pollutants and toxic gases. Today, there is an agreement among researchers that the environmental issues must be considered from a life cycle perspective. In order to reduce the negative impacts of technologies on the environment, the best scenario would be to extend their lifespan. However, an old device, is usually linked to low performances, low profit for the manufacturer, additional reparation costs, high risks, etc. In this paper, the Double-Eco (DE) model, an evaluation platform of the compromise between the performances, cost, ecology, safety and lifespan is developed. Also, the environmental impacts of the lifespan are highlighted through the example of personal computers (PCs) and the DE model is applied to three types of grease lubrication as case of study. The results show that (1) evaluating a technology with all its aspects is efficient when deciding whether to extend its lifespan (2) based on the DE model, the lubrication with the longest lifespan has a better evaluation than the two other studied cases.
Źródło:
Journal of Machine Engineering; 2021, 21, 1; 109-120
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An optimization study on an eco-friendly engine cycle named as Dual-Miller cycle (DMC) for marine vehicles
Autorzy:
Gonca, G.
Powiązania:
https://bibliotekanauki.pl/articles/259357.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
Dual-Miller cycle engine
engine performance
power density
finite-time thermodynamics
Opis:
The diesel engine is an indispensable part of technology and it is commonly used in land and marine vehicles. However, diesel engines release NOx emissions due to high combustion temperatures. They have harmful effects on the environment such as sources of photo-chemical fog and climate changes. Therefore, they must be reduced and limited. The Miller cycle application is a NOx control method and it is popular in the recent years to abate NOx produced from the internal combustion engines (ICEs). A performance investigation of a Dual-Miller cycle (DMC) engine in terms of power (PO), power density (PD) and effective efficiency (EE) has been performed using a new finite-time thermodynamics modeling (FTTM) in this study. The effects of engine design and operating parameters on the engine performance (EPER) have been examined. Additionally, the energy losses have been determined resulting from incomplete combustion (IC), friction (FR), heat transfer (HT) and exhaust output (EO). The results presented could be an essential tool for DMC marine engine designers.
Źródło:
Polish Maritime Research; 2017, 3; 86-98
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An eco-friendly strategy using flax/polylactide composite to tackle the marine invasive sponge Celtodoryx ciocalyptoides (Burton, 1935)
Autorzy:
Gentric, C.
Sauleau, P.
Powiązania:
https://bibliotekanauki.pl/articles/48062.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
artificial substance
biocomposite
Celtodoryx ciocalyptoides
sponge
polylactide
flax
ecofriendly management
Yellow Sea
China
Źródło:
Oceanologia; 2019, 61, 2
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
From an eco-fairy tale to an environmen-tally friendly lifestyle.An eco-friendly reading project by Agnieszka Marzęcka
Autorzy:
KAPUSTA, ANNA
Powiązania:
https://bibliotekanauki.pl/articles/628598.pdf
Data publikacji:
2012
Wydawca:
Fundacja Pro Scientia Publica
Tematy:
bibliotheraphy, biography, eco-fairy tale, late-modernity, style of life
Opis:
The article is concerning on the eco-critical literary phenomenon on the perspective of new species polish eco-fairy tale. The fabulous tale about ecological style of life (The meta-phorical ecology of human biography) was ilustrated by the Agnieszka Marzęcka’s modernity tune entitled The Victory of King of Cleanness
Źródło:
Journal of Education Culture and Society; 2012, 3, 1; 61-69
2081-1640
Pojawia się w:
Journal of Education Culture and Society
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synthesis and pharmacokinetic study of new thiazole derivatives containing pyrazole moiety
Autorzy:
Namera, Dipti L.
Bhoya, Umed C.
Shah, Anamik K.
Powiązania:
https://bibliotekanauki.pl/articles/1068636.pdf
Data publikacji:
2019
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Microwave irradiation
Pharmacokinetic
Pyrazole
Thiazole
eco-friendly
Opis:
For developed new eco-friendly synthetic route for the synthesis of organic compounds, here in, we have synthesized new series of thiazole derivatives 7(a-h) under microwave irradiation method using less amount of methanol as solvent and less hazardous K2CO3 as catalyst. Then after for the pharmacokinetic study, we can calculate Lipinski rules of five data using swiss ADME software, molecule 7f was fitted in ‘rules of five’ (Ro5) other compounds are showed violence in log P(o/w). The structures of all synthesized compounds are well characterized by Mass, 1H NMR, 13C NMR.
Źródło:
World Scientific News; 2019, 132; 277-284
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The analysis of environmental and human impacts of using Strong Alkaline Water for cooling during machining
Autorzy:
Da Silva, P.
Tanabe, I.
Junior, D. C. R.
Takahashi, S.
Powiązania:
https://bibliotekanauki.pl/articles/99481.pdf
Data publikacji:
2018
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
eco-friendly
strong alkaline water
emission
cooling
Opis:
An eco-friendly manufacturing approach is important for the environment. Enhancing machining performances is not only required to improve product’s quality, time saving, and reduces costs; it is also contributed to the environmental protection efforts. Cooling is important aspect for obtaining this purpose. Therefore the benefits of Strong Alkaline Water (SAW) cooling method was assessed and compared with conventional wet cutting method. An experiment was performed at Nagaoka University of Technology machining centre. Three machine tools including a milling machine, a drilling machine and a turning machine were used. The study shows that using SAW for cooling is far more efficient than conventional cooling method. It reduces annual global warming potential by 72.95%, acidification potential 98.18%, ozone depletion potential 99.6%, smog formation potential 85.71% and human toxicity potential 42.86% compare with conventional method. The study concludes that besides inhibiting corrosion, prolonging tool life, improving surface roughness of final cutting and reducing energy usage, strong alkaline water cooling is an environmentally friendly approach and has positive impact on human health.
Źródło:
Journal of Machine Engineering; 2018, 18, 1; 45-60
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Silica ash from waste palm fronds used as an eco-friendly, sustainable adsorbent for the Removal of cupper (II)
Autorzy:
Al-Qadri, Fatima A.
Alsaiari, Raiedhah
Powiązania:
https://bibliotekanauki.pl/articles/27311556.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
Cupper (II) adsorption
palm frond waste ash
silica
krzem
krzemionka
popiół
liście palmowe
Opis:
This study describes the creation of a low-cost silica material using a silicate extract as a precursor. This precursor is made from inexpensive palm frond waste ash through a simple calcination process at 500°C and a green extraction with water. Nitrogen adsorption-desorption, FTIR analyses, and transmission electron microscopy were used to characterize the samples. The surface area of the obtained mesoporous silica ash material was 282 m2/g1, and the pore size was 5.7 nm. For the adsorption of copper ions, an excellent adsorbent was obtained. The maximum copper ion adsorption capacity of this inexpensive silica ash-based adsorbent for removing heavy metal ions Cu(II) from aqueous solutions was 20 mg/g, and the eff ect of pH, temperature, and time on its adsorption capacity were also investigated. In addition, The adsorption isotherms were fi tted using Langmuir and Freundlich models, and the adsorption kinetics were evaluated using pseudo-first-order and pseudo-second-order models The results demonstrated that the synthesized adsorbent could effectively remove heavy metal ions from aqueous solutions at pH levels ranging from 2 to 5. The adsorption isotherms followed the Langmuir model, and the kinetic data fit the pseudo-second-order mode well. The thermodynamic results Negative values of G° indicate that the adsorption process was spontaneous, and negative values of entropy S° indicate that the state of the adsorbate at the solid/solution interface became less random during the adsorption process. According to the findings, prepared silica from palm waste ash has a high potential for removing heavy contaminating metal ions Cu (II) from aqueous solutions as a low-cost alternative to commercial adsorbents.
Źródło:
Archives of Environmental Protection; 2023, 49, 2; 30--39
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of diethylenetriaminepenta pentasodium salt as an eco-friendly depressant to effectively improve the flotation separation of scheelite and calcite
Autorzy:
Zhou, Hepeng
Wu, Handan
Guo, Jiangfeng
Tang, Xuekun
Huang, Wen
Luo, Xianping
Powiązania:
https://bibliotekanauki.pl/articles/27323649.pdf
Data publikacji:
2023
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
flotation
scheelite
calcite
diethylenetriaminepenta pentasodium salt
depressant
adsorption
Opis:
Diethylenetriaminepenta (methylene-phosphonic acid) pentasodium salt (DTPMPA), an eco-friendly reagent, was tried for the first time as a depressant for flotation separation of scheelite from calcite. Micro-flotation tests show that DTPMPA can selectively depress the floatability of calcite. In contrast, DTPMPA barely affects the flotation behavior of scheelite. Based on the selective depress effect, floatation separation of scheelite and calcite can be effectively achieved by using DTPMPA as depressant in artificially mixed minerals flotation tests. Based on a series of measurements, it found the surface of calcite was positively charged due to the existence of Ca ion site, which can be chelated with –PO3H- functional group on the surface of DTPMPA. In the flotation process, DTPMPA can be chemically absorbed on the surface of calcite to inhibit further collector adsorption. On contrast, little DTPMPA was adsorbed on the surface of scheelite due to the spatial site resistance and electrostatic repulsion induced by surface WO42+. All in all, these results exhibit DTPMPA has excellent selective depression ability on calcite, which can be potentially applied in the actual scheelite flotation process.
Źródło:
Physicochemical Problems of Mineral Processing; 2023, 59, 6; art. no. 174718
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New Eco-Friendly Method of Cellulosic Product Bleaching with Simultaneous Disinfection
Nowa ekologiczna metoda bielenia wyrobów celulozowych z jednoczesną dezynfekcją
Autorzy:
Sójka-Ledakowicz, J.
Walawska, A.
Filipowska, B.
Lewartowska, J.
Olczyk, J.
Kiwała, M.
Powiązania:
https://bibliotekanauki.pl/articles/233987.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
vaporised hydrogen peroxide
cotton bleaching
disinfection
microbiological purity
waporyzowany nadtlenk wodoru
bielenie włókien celulozowych
dezynfekcja
czystość mikrobiologiczna
Opis:
In this article, a bleaching method with simultaneous disinfection using hydrogen peroxide in the gas phase (Vaporised Hydrogen Peroxide - VHP) is presented as an innovative, environmentally friendly, low-temperature method without wastewater generation. After the process, the cellulose products are characterised by acceptable whiteness and microbiological purity. The method presented is an eco-friendly alternative for the conventional water- and energy intensive bleaching process with reference to products made of cellulosic fibres to be applied in special applications: medical (gauze, cotton wool, bandages) and hygienic (e.g. face masks used in the prophylaxis of bacterial and/or viral infections). After tests of the sensitising effect on animals, the bleached materials were considered safe for potential users.
W artykule zaprezentowany został innowacyjny, bezściekowy i niskotemperaturowy sposób bielenia z jednoczesną dezynfekcją wyrobów z włókien celulozowych z zastosowaniem nadtlenku wodoru w fazie gazowej (waporyzowanego nadtlenku wodoru). W wyniku obróbki uzyskuje się wyroby charakteryzujące się akceptowalną białością oraz czystością mikrobiologiczną. Prezentowana metoda jest proekologiczną alternatywą dla konwencjonalnego wodo- i energochłonnego procesu bielenia w odniesieniu do wyrobów z włókien celulozowych przeznaczonych do zastosowań specjalnych: medycznych (gaza, wata, bandaże) oraz higienicznych (m. in. maski zabezpieczające drogi oddechowe człowieka, stosowane w profilaktyce przenoszenia zakażeń bakteryjnych i/lub wirusowych). Rezultaty badań uczulających wykonanych na zwierzętach zgodnie z procedurą OECD pozwalają uznać materiały celulozowe poddane procesowi bielenia z jednoczesną dezynfekcją z zastosowaniem waporyzowanego nadtlenku wodoru za produkt bezpieczny dla potencjalnych użytkowników.
Źródło:
Fibres & Textiles in Eastern Europe; 2015, 3 (111); 115-119
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of the content of corn stalk fibres and additional heat treatment on properties of eco-friendly fibreboards bonded with lignosulphonate
Autorzy:
Mihajlova, Julia
Savov, Viktor
Simeonov, Tsvetan
Powiązania:
https://bibliotekanauki.pl/articles/2201362.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Drewna
Tematy:
dry-process fibreboards
eco-friendly
corn stalk fibres
lignosulphonate
additional heat treatment
Opis:
This study aims to find the possibility of producing eco-friendly thin Medium Density Fibrepanels (MDF) with the participation of corn stalk fibres and using lignosulphonate as a bio-based binder. The main novelty in the research is the establishment of the effect of additional heat treatment on the properties of MDF manufactured with the participation of non-wood lignocellulosic raw materials and bonded with bio-based adhesive – lignosulphonate. Panels with 15% lignosulphonate content and variation of the content of corn stalk fibres from 0% to 30% were manufactured. Previous experiments showed that when only lignosulfonate is used as a binder, the manufactured panels generally have low waterproofness. To reduce the effect of this main disadvantage, the panels were subjected additionally to heat treatment. The properties of the MDF with and without additional heat treatment were compared. The effect of both the content of corn stalk fibres and the additional heat treatment was found. As a whole, the additional heat treatment improves the properties of MDF produced with lignosulphonate. Still, in case of increased content of corn stalk fibres, it is necessary to apply softened regimes than the ones selected for this study.
Źródło:
Drewno. Prace Naukowe. Doniesienia. Komunikaty; 2022, 65, 209; Art. no. 1644-3985.395.06
1644-3985
Pojawia się w:
Drewno. Prace Naukowe. Doniesienia. Komunikaty
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Possibilities of application PVD coating nACRo4 deposited on high contact ratio gearing in interaction with the conventional and eco-friendly lubricant
Autorzy:
Fürstenzeller, A.
Tóth, F.
Kadnár, M.
Powiązania:
https://bibliotekanauki.pl/articles/95211.pdf
Data publikacji:
2018
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
FZG test
HCR gearing
eco-friendly oil
PVD coating
test FZG
uzębienie HCR
olej przyjazny dla środowiska
powłoka PVD
Opis:
The submitted article deals with the issue of the application of the PVD coating nACRo4 deposited on the High Contact Ratio gearing made of 16MnCr5 material in interaction with the conventional PP 90H lubricant and biological Biogear S150 lubricant. Experimental tests were carried out on an FZG test rig with closed performance flow, followed by measuring of the surface roughness change. In experiment, we followed the STN 65 6280 norm for FZG scuffing tests, from which we gained load values for different load levels. The results of experimental tests were statistically processed and, on basis on them, relations were established between surface roughness and load level for both used lubricants.
Źródło:
Journal of Mechanical and Energy Engineering; 2018, 2, 3; 169-174
2544-0780
2544-1671
Pojawia się w:
Journal of Mechanical and Energy Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of two alternative procedures for measuring airflow resistance of sound absorbing materials
Autorzy:
del Rey, R.
Alba, J.
Arenas, J. P.
Ramis, J.
Powiązania:
https://bibliotekanauki.pl/articles/176777.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
material characterization
airflow resistance
sound absorbing materials
eco-friendly material
Opis:
It is well known that sound absorption and sound transmission properties of open porous materials are highly dependent on their airflow resistance values. Low values of airflow resistance indicate little resistance for air streaming through the porous material and high values are a sign that most of the pores inside the material are closed. The laboratory procedures for measuring airflow resistance have been stan- dardized by several organizations, including ISO and ASTM for both alternate flow and continuous flow. However, practical implementation of these standardized methods could be both complex and expensive. In this work, two indirect alternative measurement procedures were compared against the alternate flow standardized technique. The techniques were tested using three families of eco-friendly sound absorbent materials: recycled polyurethane foams, coconut natural fibres, and recycled polyester fibres. It is found that the values of airflow resistance measured using both alternative methods are very similar. There is also a good correlation between the values obtained through alternative and standardized methods.
Źródło:
Archives of Acoustics; 2013, 38, 4; 547-554
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Eco-Friendly Absorption Method of Cu2+, Cd2+, and Pb2+ Using the Shells and Chitosan Derived from Solen vagina
Autorzy:
Maulani, Dyan
Nofianti, Kholis Amalia
Sugijanto, Noor Erma
Kartosentono, Sugijanto
Powiązania:
https://bibliotekanauki.pl/articles/1955429.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
Solen vagina
chitosan
mollusca shell
biosorbent ability
water pollution
zero waste
Opis:
The processing of Mollusca for food consumption generates a large amount of by-products; for instance, shells, which may contaminate and deposit in the marine coastal environment. Therefore, additional processing is needed to reduce and transform shells into valuable materials, such as chitosan or another derivate product. This study aimed to isolate and characterize the chitosan from Solen vagina (known as lorjuk shells in Indonesian) and to determine the application of chitosan. This is to be compared with Solen vagina shell powder that commonly functions as bio-sorbent of water pollutants Cu2+, Cd2+, and Pb2+. The isolated chitosan was characterized based on its physicochemical properties, namely purity as tested by using X-ray fluorescence (XRF), and functional group as confirmed by Fourier transform infrared (FTIR). In addition, bio-absorbent ability was evaluated through a column method, where the chitosan products are used and compared with Solen vagina shell powders. In this study, the chitosan isolated from Solen vagina shells yielded 15.92 ± 1.78% and showed a high deacetylation degree (DD) by 85.00 ± 3.98%. FTIR and physicochemical properties analysis confirmed that the isolated chitosan is of good quality, as standardized by industry regulator; thus, it could be used as food product and bioabsorbent material. Moreover, the bio-absorbent ability of chitosan demonstrated a similar value with S. vagina shell powders, which can absorb more than 92% of heavy metals around second elution. In conclusion, the S. vagina shell powder and the isolated chitosan have the potential as natural bio-absorbent to reduce the heavy metal contents in industrial wastewater.
Źródło:
Journal of Ecological Engineering; 2021, 22, 7; 212-222
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hotele przyjazne środowisku – utopia czy rzeczywistość? Studium przypadku miasta Poznania
Eco-friendly hotels − utopia or reality? Case study of the city of Poznań
Autorzy:
Graja-Zwolińska, Sylwia
Nowak, Patrycja
Powiązania:
https://bibliotekanauki.pl/articles/586970.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Ekonomiczny w Katowicach
Tematy:
Ekologiczny hotel
Polityka ekologiczna
Zachowania prośrodowiskowe
Ecological hotel
Ecological policy
Environmental behavior
Opis:
W dobie postępujących zmian klimatycznych wdrażanie postaw proekologicznych na każdej płaszczyźnie życia wydaje się być konieczne. Kwestia ta dotyczy także turystyki – szczególnie wobec rosnącego problemu tzw. overtourism. Niniejszy artykuł przedstawia wyniki badań przeprowadzonych na grupie poznańskich hoteli reprezentujących kategorię od 3 do 5 gwiazdek. Założono bowiem, że rozwiązania proekologiczne będą obecne w tej grupie obiektów i że będą one eksponowane w działaniach informacyjnych oraz promocyjnych hoteli. Do badań zastosowano metodę tajemniczego klienta, a konkretnie e-mailingu, polegającego na wysłaniu zapytania ofertowego do wybranych obiektów. Analizie poddano zakres udzielonych odpowiedzi, jak również opinie gości zamieszczane na portalach rezerwacyjnych. Celem opracowania było znalezienie odpowiedzi na następujące pytania: Jaki odsetek poznańskich hoteli najwyższej kategorii (od 3 do 5 gwiazdek) prowadzi działania na rzecz ochrony środowiska? Czy istnieją różnice w podejściu do badanego problemu między obiektami sieciowymi a niezależnymi? Czy i w jakim zakresie hotele wykorzystują działania proekologiczne w działaniach promujących obiekt? Czy goście analizowanych hoteli zwracają uwagę na aktywność prośrodowiskową? W świetle przeprowadzonych analiz można stwierdzić, iż poznańskie hotele należące do grupy reprezentującej obiekty od 3 do 5 gwiazdek realizują działania proekologiczne o bardzo podobnym zakresie (racjonalne gospodarowanie wodą, energią i segregacja odpadów), co wynika z konieczności przestrzegania przepisów prawa i wymogów kategoryzacyjnych. Aktywność na tej płaszczyźnie prezentują powszechnie (np. za pomocą witryn internetowych) hotele sieciowe, natomiast wśród obiektów niezależnych taką aktywność wykazał tylko jeden hotel. Badania ukazały także różnice w podejściu hotelarzy do działań przyjaznych środowisku (co stwierdzono na podstawie przekazanych informacji), co może świadczyć o zróżnicowanym poziomie wiedzy ekologicznej posiadanej przez pracowników. Uzyskane spostrzeżenia utwierdzają w przekonaniu, iż podnoszenie świadomości ekologicznej to proces złożony i długotrwały.
In the era of progressing climate change, it seems necessary to implement pro-ecological attitudes at every level of life. This issue also applies to tourism ̶ especially in view of the growing problem of the so-called overtourism. This article presents the results of research conducted on a group of Poznań hotels representing the category of 3 to 5 stars. The mystery shopper method was used, specifically e-mailing, consisting of sending an inquiry to selected objects. The scope of answers provided was analyzed, as well as guest reviews published on booking portals. The purpose of the study was to find answers to the following questions: What percentage of Poznań’s highest category hotels (from 3 to 5 stars) carry out activities for environmental protection? Are there any differences in the approach to the problem under investigation between network and independent objects? Do and to what extent hotels use environmentally-friendly actions in activities promoting the facility? Do the guests of the analyzed hotels pay attention to pro-environmental activity? In the light of the conducted analyzes, it can be stated that Poznań hotels belonging to the group representing objects from 3 to 5 stars carry out pro-ecological activities with a very similar scope (rational water, energy and waste segregation), which results from the need to comply with legal regulations and categorization requirements. Activity in this area is commonly presented (e.g. by means of websites) by network hotels, while among independent facilities only one hotel has demonstrated such activity. The research also showed differences in the hoteliers’ approach to environmentally friendly activities (which was confirmed on the basis of the information provided), which may indicate a diverse level of ecological knowledge possessed by employees. Observations confirm the belief that raising environmental awareness is a complex and long-term process.
Źródło:
Studia Ekonomiczne; 2020, 392; 7-18
2083-8611
Pojawia się w:
Studia Ekonomiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Eco-friendly accommodation facilities in Mladá Boleslav, Czechia: a case study
Przyjazna dla środowiska baza noclegowa w mieście Mladá Boleslavw Czechach: studium przypadku
Autorzy:
Scholz, Petr
Červová, Lenka
Powiązania:
https://bibliotekanauki.pl/articles/2032613.pdf
Data publikacji:
2021-12-21
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
„zielone” elementy i rozwiązania
środowisko naturalne
obiekt noclegowy
Czechy
green elements and measures
environment
accommodation facility
Czechia
Opis:
The purpose of this article is to evaluate the application of various green management measures in selected accommodation facilities in Czechia, namely in the town of Mladá Boleslav and its surroundings. This study was carried out using mixed research methods including semi-structured interviews with accommodation facility management staff. The interviews were complemented with a questionnaire survey which focused on the application of eco-friendly solutions in accommodation facilities. The total sample of participating facilities represented 39.6% of those in the town and its surroundings. In the data analysis stage, correspondence analysis was used. The results suggest that the higher the category, the stronger the trend to use eco-friendly methods in running accommodation facilities.
Celem artykułu jest ocena zastosowania różnorodnych rozwiązań w ramach „zielonego” zarządzania w wybranych obiektach noclegowych w Czechach, a konkretnie w mieście Mladá Boleslav i jego okolicach. Podczas badania korzystano z mieszanych metod badawczych, w tym wywiadów częściowo ustrukturyzowanych, przeprowadzonych z kadrą zarządzającą opisywanych obiektów. Wywiady uzupełniono badaniami ankietowymi, koncentrującymi się na problemie zastosowania w obiektach noclegowych rozwiązań nieszkodliwych dla środowiska. Całkowita próba podmiotów uczestniczących w badaniu stanowiła 39,6% wszystkich obiektów tego typu znajdujących się w mieście i okolicach. Na etapie obróbki danych zastosowano analizę odpowiedniości. Wyniki sugerują, że im wyższa klasa obiektu, tym silniejsza tendencja do korzystania w jego zarządzaniu z metod nieszkodliwych dla środowiska.
Źródło:
Turyzm; 2021, 31, 2; 103-116
0867-5856
2080-6922
Pojawia się w:
Turyzm
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Provisional eco-city - ekologiczne tymczasowe miasteczko kontenerowe na czasy klęsk humanitarnych
Provisional eco-city - eco-friendly temporary container city for times of humanitarian disaster
Autorzy:
Ujma-Wąsowicz, Katarzyna
Walentyński, Ryszard
Węgrzyn, Tomasz
Szczucka-Lasota, Bożena
Bartosik, Wiktoria
Jurkiewicz, Anna
Lipińska, Olga
Popielarczyk, Adrianna
Swoboda, Jakub
Wrona, Krystian
Powiązania:
https://bibliotekanauki.pl/articles/2086652.pdf
Data publikacji:
2022
Wydawca:
PWB MEDIA Zdziebłowski
Opis:
Klęski humanitarne to nieodłączny element życia na Ziemi. Z powodu różnych katastrof, naturalnych i powodowanych przez człowieka, w których budynki ulegają zniszczeniu, mieszkańcy terenów zurbanizowanych zmuszeni są niejednokrotnie do zamieszkiwania w odległych od swych dotychczasowych domostw miejscach. Ideą projektu było przeprowadzenie prac badawczo-projektowych mających na celu opracowanie kontenera nowej generacji, który mógłby być multiplikowany w sposób wertykalny, przybierać różne funkcje, być budowany i rozbierany przez samych użytkowników, składać sięw pewnych swych częściach z materiałów biodegradowalnych, w innych na tyle lekkich i wytrzymałych, by wykorzystać je wielokrotnie (zgodnie z ideą gospodarki obiegu zamkniętego - gospodarki cyrkularnej).
Humanitarian disasters are an integral part of life on Earth. Due to various disasters, natural and man-made, in which buildings are destroyed, residents of urban areas are often forced to live in locations far away from their existing homes. The intention of the authors was to conduct research and design work to develop a new generation container, that could be multiplied in a vertical way, take on different functions, be built and taken apart by its users, be composed of biodegradable materials in some parts, and in other parts be light and durable enough to be reused many times (in accordance with the idea of circular economy).
Źródło:
Builder; 2022, 26, 7; 44--48
1896-0642
Pojawia się w:
Builder
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies