Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Gupta, K." wg kryterium: Autor


Wyświetlanie 1-7 z 7
Tytuł:
Thermoacoustical Excess Properties of Binary Liquid Mixtures - A Comparative Experimental and Theoretical Study
Autorzy:
Yasmin, M.
Singh, K.
Parveen, S.
Gupta, M.
Shukla, J.
Powiązania:
https://bibliotekanauki.pl/articles/1808024.pdf
Data publikacji:
2009-05
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
43.35.+d
62.60.+v
82.60.Lf
Opis:
Specific heat ratio (γ), pseudo-Grüneisen parameter (Γ), heat capacity $(C_p)$ and effective Debye temperature $(θ_{D})$ for binary system of tetrahydrofuran with o-cresol and methanol respectively, were calculated using the experimentally measured densities, velocities and viscosities of the pure liquids and their mixtures over the whole composition range and at T = 293, 303, 313 K. The excess pseudo-Grüneisen parameter $(Γ ^{E})$, excess molar isentropic compressibility $(K_{s}^{E})$ and excess acoustic impedance $(Z^{E})$ were also calculated. The excess deviation functions have been correlated using Redlich-Kister polynomial equation. The observed values of the excess parameters plotted against the mole fraction of tetrahydrofuran have been explained on the basis of intermolecular interaction suggesting strong interaction in tetrahydrofuran + o-cresol than in tetrahydrofuran + methanol. Partial molar isentropic compressibility at infinite dilution and their excess values were calculated for each component. Sanchez theory, Goldsach-Sarvas volume fraction statistics, Sudgen's relation, Flory-Patterson-Rastogi and Brock and Bird model were used with the Aurebach relation to compute theoretically the values of ultrasonic velocities at varying temperatures. The velocity deviations were estimated in terms of average percentage deviations. Internal pressure for both the systems were calculated theoretically and discussed on the basis of relative applicability of the models in theoretical estimations. The isothermal compressibility $(k_T)$, for these binary mixtures were theoretically evaluated by using the Flory statistical theory and five hard sphere models and compared with the experimental values.
Źródło:
Acta Physica Polonica A; 2009, 115, 5; 890-900
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Study on Creep Behavior of Composite Solid Propellants Using the Kelvin-Voigt Model
Autorzy:
Bihari, B. K.
Rao, N. P. N.
Gupta, M.
Murthy, K. P. S.
Powiązania:
https://bibliotekanauki.pl/articles/358395.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
mechanical properties
viscoelasticity
propellant
creep
DMA
Opis:
A Kelvin-Voigt model consisting of a spring and a dashpot in parallel was applied for the viscoelastic characterization of solid rocket propellants. Suitable values of spring constants and damping coefficients were employed by a least squares fit of the errors to generate creep curves using a Dynamic Mechanical Analyzer (DMA) for composite solid propellants. Three different composite propellant formulations based on HTPB/AP/Al having burning rates of 5 mm/s, 15 mm/s and 20 mm/s were tested under different stress levels varying from 0.1 MPa to 3 MPa and at different temperatures varying from 35 °C to 85 °C. Creep behavior with recovery was studied and analyzed to evaluate the viscoelastic properties. The change in spring constants, representing elastic deformation, was very small compared to the damping coefficients for the propellants studied. For a typical propellant formulation, when the stress level was increased, the spring and damping coefficient both increased significantly whereas for an increase in temperature, they remained nearly constant. However, the ratio E/η was observed to be constant and independent of stress level. It was also observed that the variation of E and η varied linearly with increase in stress whereas their ratio showed a logarithmic variation. A mathematical correlation was developed to evaluate the viscoelastic properties during creep of composite propellants.
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 3; 742-756
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Molecular Interaction Study of Binary Mixtures of THF with Methanol and o-Cresol - an Optical and Ultrasonic Study
Autorzy:
Parveen, S.
Singh, S.
Shukla, D.
Singh, K.
Gupta, M.
Shukla, J.
Powiązania:
https://bibliotekanauki.pl/articles/1585019.pdf
Data publikacji:
2009-12
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
43.35.+d
62.60.+v
82.60.Lf
Opis:
The refractive indices, densities and ultrasonic velocities of binary liquid mixtures of tetrahydrofuran (THF) with methanol and o-cresol over the entire composition range have been measured at 293, 303 and 313 K. Refractive index, density and ultrasonic velocity data have been used to evaluate the molar refraction deviation $ΔR_{m}$, deviation in ultrasonic velocity Δu, excess internal pressure $π_{i}^{E}$, excess molar enthalpy $H_{m}^{E}$ and excess free volume $V_{f}^{E}$. The computed results of $ΔR_{m}$, Δu, $π_{i}^{E}$, $H_{m}^{E}$ and $V_{f}^{E}$ were fitted to the Redlich-Kister polynomial equation. These results suggest that specific strong interactions are taking place in THF + o-cresol mixture while dispersive forces seem to be responsible for behaviour of THF + methanol mixture. Further, experimental refractive index and density data of these mixtures were also used to test the validity of the empirical/semi-empirical relations and models for refractive index and density, respectively.
Źródło:
Acta Physica Polonica A; 2009, 116, 6; 1011-1017
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nickelization Effect on the High Temperature Tensile Properties of Mg-0.7Y2O3 Nanocomposite
Autorzy:
Hassan, S. F.
Tun, K. S.
Patel, F.
Al-Aqeeli, N.
Gupta, M.
Powiązania:
https://bibliotekanauki.pl/articles/357046.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
magnesium
nanocomposite
high-temperature
tensile strength
deformation
Opis:
In this study, high performance magnesium-yttria nanocomposite’s room temperature, strength and ductility were significantly enhanced by the dispersion of nano-sized nickel particles using powder blending and a microwave sintering process. The strengthening effect of the dispersed nano-sized nickel particles was consistent up to 100°C and then it gradually diminished with further increases in the test temperature. The ductility of the magnesium-yttria nanocomposite remained unaffected by the dispersed nano-sized nickel particles up to 100°C. Impressively, it was enhanced at 150°C and above, leading to the possibility of the near net shape fabrication of the nanocomposite at a significantly low temperature.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1411-1415
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Studies on Aluminized, High Burning Rate, Butacene® Based, Composite Propellants
Autorzy:
Ghosh, K.
Behera, S.
Kumar, A.
Padale, B. G.
Deshpande, D. G.
Gupta, M.
Powiązania:
https://bibliotekanauki.pl/articles/358702.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
Butacene®
ferrocene
pressure exponent
Opis:
This paper reports on a Butacene® based composite propellant with high burning rate. The effect of replacing HTPB with Butacene® on the physical, mechanical and ballistic properties, and sensitivity towards impact and friction, has been studied. The ballistic properties were evaluated as burning rates at various pressures (7-11 MPa), pressure exponents, ignition temperatures etc. As expected, a remarkable enhancement in burning rate at low pressures was observed with increasing percentage of Butacene®. Comparatively lower n-values were observed for compositions containing Butacene® than for HTPB based propellants. The sensitivity of Butacene® based compositions, in terms of impact and friction, was found to be increased with an increasing percentage of Butacene®.
Źródło:
Central European Journal of Energetic Materials; 2014, 11, 3; 323-333
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Integrated biostratigraphy of the Jurassic strata of the Wagad Uplift, Kachchh, western India
Autorzy:
Rai, J.
Garg, S.
Gupta, M.
Singh, A.
Pandey, D. K.
Fürsich, F. T.
Alberti, M.
Garg, R.
Powiązania:
https://bibliotekanauki.pl/articles/2077328.pdf
Data publikacji:
2015
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
Jurassic
calcareous nannofossils
dinoflagellate cysts
ammonites
Oxfordian
Kimmeridgian
Wagad Uplift
Kachchh
jura
wapienie
bruzdnice
amonity
Oksford
Kimeryd
Opis:
An integrated study based on calcareous nannofossils, organic-walled dinoflagellate cysts, and ammonites from the Washtawa and Kanthkot formations of the Wagad Uplift have allowed a detailed documentation of the stratigraphic position of these formations within the Oxfordian and Kimmeridgian sediments of the Kachchh Basin, western India. The nannofossil assemblages from the lower part of the Nara Shale Member exposed in the Nara and Washtawa domes, the Kanthkot Ammonite Beds along the Trambau River section, and the Patasar Shale Member exposed along the Trambau River section and the Patasar Tank section in the eastern part of the Wagad Uplift belong to the NJ 14 Cyclagelosphaera margerelli Zone of the Early Oxfordian, the NJ 15a Lotharingius sigillatus Zone of the Middle Oxfordian, and the NJ 15b Cretarhabdus conicus of Early Kimmeridgian age, respectively. Zonation schemes, based on calcareous nannofossils, dinoflagellate cysts, and ammonites were calibrated highlighting their biostratigraphic potential. These studies may represent a reference biochronology for Oxfordian–Kimmeridgian age strata applicable to the Tethyan realm of which India was a part during Late Jurassic times.
Źródło:
Volumina Jurassica; 2015, 13, 2; 55--80
1896-7876
1731-3708
Pojawia się w:
Volumina Jurassica
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies