Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "Diesel engine" wg kryterium: Temat


Tytuł:
Marine diesel engine valve gear mechanism diagnostics problems
Autorzy:
Lus, T.
Powiązania:
https://bibliotekanauki.pl/articles/245681.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
marine diesel engine
diagnostics
valve gear
Opis:
Marine diesel engines have changed their construction last years because of electronic control implementation in fuelling process. Electronic control implementation could be also important in valve gear mechanism which is main part of the engine gas es exchange system. In this paper problems connected with of valve gear mechanisms operation and diagnostics have been presented. the diagnostic methods and processes which could impact diagnostic process will be shown together with examples from test bed and real vessels. diagnostic methods which based on vibration signals analysis are sensitive on engine load and speed change. separate engine cylinder 's loads generale differences in so called "dynamic valve gear diagrams " which will be shown for some marine engine types. opening and closing of inlet and exhaust valves generale vibration signals in entire engine structure. There are some tools available in signal analysis which gives opportunity to trace changes in signal patterns in real time monitoring systems. special diagnostic method based on vibration signal analysis worked out in the polish naval academy, gives opportunity to change engine maintenance philosophy from scheduled planed maintenance system to condition based maintenance system without fear about real operating engine conditions.
Źródło:
Journal of KONES; 2009, 16, 4; 287-292
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Procedures and treatments leading to reduction of toxic components emission in diesel engines exhaust gas
Autorzy:
Kalina, P.
Irzycki, A.
Snopkiewicz, K.
Powiązania:
https://bibliotekanauki.pl/articles/248119.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engine
pollution
reduction of emission
Opis:
The fight against global warming and Earth atmosphere pollution has been for years one of the most important tasks of governments and national economies of the European Union members. Abandonment of efforts leading to reduction mainly of carbon dioxide emission by heavy industry, electric power generation based on coal, passenger aviation and wheeled passenger transport will inevitably be leading to deterioration of health condition of our citizens. This article presents an overview of commonly used structural and technological treatments which have impact on reduction of toxic standardized exhaust pollutants in the surface transport, exemplified on SW 400 engine version of L2 / 3 and its turbocharged version 6CT 107 2/L2. The impact of: engine's adjustment parameters, catalytic afterburners, exhaust gas recirculation, modifications of injectors, turbochargers, supercharging air-cooling and particulates filter on carbon monoxide, hydrocarbons, nitrogen oxides and particulates emission was thoroughly examined. The parameters being compared were the results of toxicity tests according to ECE-R49 Regulation and a maximal smoke values on full-load characteristics. In conclusion, of the paper the limiting allowable values of toxic components emitted in Diesel engines exhaust gases in the following EU Emission Standards are presented.
Źródło:
Journal of KONES; 2012, 19, 1; 163-169
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of diesel fuel mixture and camelina oil ester on selected parameters of combustion process
Autorzy:
Orliński, P.
Powiązania:
https://bibliotekanauki.pl/articles/243639.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
camelina oil ester
combustion
diesel engine
Opis:
This paper presents the results of comparative research into basic physical and chemical properties of pure diesel fuel and two types of mixtures: Camelina oil ester (Camelina oil ester content in the mixture was 10% and 15%) and diesel fuel. Camelina oil ester was used to show that it can also be used as an additive plant to diesel fuel (according to the plans of the European Union). Similarly to on a large scale used ester of rapeseed oil. The base fuel in the research was clean diesel fuel (without the addition of ester as in the case of diesel fuel available at petrol stations).The use of fuels with different physical and chemical properties to supply the diesel engine and the use of measuring equipment used for determining the parameters of fast-changing operation resulted in the determination of the operating medium average pressure during the combustion process. On the basis of the experimental pressure characteristics of heat release were identified. Analysis of these characteristics determined the proportion of total combustion phases of kinetics and diffusion, depending on the type of fuel and operating conditions. Finally, the paper shows that the fuel with different physicochemical properties has a significant effect on the combustion process. A comparative assessment of the suitability of tested mixtures for operational use was made.
Źródło:
Journal of KONES; 2013, 20, 3; 291-298
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Residual stresses assessment in the marine diesel engine crankshaft 12V38 type
Autorzy:
Król, K.
Wikło, M.
Olejarczyk, K.
Kołodziejczyk, K.
Siemiątkowski, Z.
Żurowski, W.
Rucki, M.
Powiązania:
https://bibliotekanauki.pl/articles/244853.pdf
Data publikacji:
2017
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engine
crankshaft
simulation
residual stress
Opis:
In the paper, the measurement of the marine diesel engine crankshaft residual stresses is presented. The hole drilling strain gauge was chosen because of its simplicity and low cost. Moreover, deflection calculation was made for the load corresponding to its weight and the concentrated force in the chosen bearing conditions. Deflection of the journal and bending rigidity under the concentrated force was calculated as well. In that case, the crankshaft was supported in the neighbouring crank journals. The reduced stresses were calculated according to the Huber – Mises hypothesis. The residual stresses were measured in the marine diesel engine crankshaft type 12V38 after the finishing, with the hole-drilling method. It was found that the residual stresses reach the maximal value of 86 MPa, but for 50% of measuring points, the residual stresses did not exceed the value of 20 MPa. The squeezing stresses were found to be dominant. The measurement results provided important data for further consideration, especially for the correction of the bending deformation of the produced crankshaft.
Źródło:
Journal of KONES; 2017, 24, 2; 117-123
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved method of processing the output parameters of the diesel locomotive engine for more efficient maintenance
Autorzy:
Zvolenský, Peter
Barta, Dalibor
Grenčík, Juraj
Droździel, Pawel
Kašiar, Ľubomír
Powiązania:
https://bibliotekanauki.pl/articles/1841741.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
maintenance
locomotive
diesel engine
control parameters
Opis:
Modernization of aged rolling stock is one of the possibilities to adapt it to the current requirements for better environmental friendliness and economy of railway transport. However, some vehicle upgrades lead to new failures that were not observed in the original vehicles. The cause is the so-called “hybrid design”, built on a combination of original and selected new components. The aim of the work was to improve the situation with frequent failures and unavailability that occur on the modernized locomotive where a new diesel engine and new electronic control system was installed. Within the work, a simplified methodology for evaluating the outputs of diagnostic equipment was developped based on and applied to specific locomotive type and its diesel engine. The methodology resulted in a significant reduction of the time for assessing the condition of the vehicle’s diesel engine and more effective maintenance. The paper also presents other possibilities in the analysis of big data in the maintenance of rolling stock e.g. using fuzzy logic.
Źródło:
Eksploatacja i Niezawodność; 2021, 23, 2; 315-323
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact analysis of air humidity on operating parameters of diesel engine
Autorzy:
Haller, P.
Jankowski, A.
Kolanek, C.
Magdziak-Tokłowicz, M.
Wróbel, R.
Powiązania:
https://bibliotekanauki.pl/articles/246293.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
humidity
diesel engine
efficiency
engine power
engine torque
Opis:
A major problem in the combustion diesel engines is the different distribution of the mixture of air and fuel and also temperatures inside the combustion chamber. It helps the formation of points of the high and low oxygen concentration in the combustion chamber of the engine. In areas with a high concentration of oxygen, the combustion process produces very harmful NOx, and in places with low oxygen concentration, as a result of incomplete fuel combustion particles are created in the form of soot. This not regular distribution of the mixture of air and fuel and temperatures in the combustion chamber affect the limited maximum engine power and efficiency at his every operating cycle. One method for improving the combustion process is feeding into the engine air with high relative humidity. The study was conducted on a chassis dynamometer at the Department of Vehicles Engineering Wroclaw University of Technology. For the purposes of the study determined the external characteristics, including maximum engine power and maximum engine torque at different air relative humidity and quite similar air temperature. Analysis of the results of research shows that high air relative humidity has a positive effect on the work parameters of the diesel engine.
Źródło:
Journal of KONES; 2015, 22, 3; 37-42
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Issue of changes in technical states of a Diesel engiene as the result of wear of its tribological systems
Autorzy:
Girtler, J.
Powiązania:
https://bibliotekanauki.pl/articles/359783.pdf
Data publikacji:
2012
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
load
technical state
diesel engine
wear
Opis:
The paper shows a necessity to consider the processes of load on and wear of tribological systems in Diesel engines (and therefore the changes in their states) in real conditions as random processes. This means that mathematical models for these processes can be random functions with an argument which is time (t) and with values which are random variables such as loads and wear of particular tribological systems. The load properties for the tribological systems have been presented as the main causes of their failures. It has been signaled that a stochastic dependence should be expected between mechanical load and thermal load, whose the intensity (force) can be defined by Czuprow’s convergence coefficient. A proposal has been submitted to accept that the tribological system load in Diesel engines is a stationary process with asymptotically independent increments. The reasons for this proposal have been presented in the form of relevant hypotheses and an exemplary graph of changes in pressure and temperature in an engine cylinder under operation. Also it has been signaled that the models of wear processes in tribological systems may be stochastic processes with special properties called semi-Markov processes. The wear properties for these systems have been explained in the form of relevant hypotheses.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2012, 31 (103); 77-82
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of the shape of the combustion chamber on exhaust gases toxicity in T370 engine
Autorzy:
Kalina, P.
Kawalec, M.
Powiązania:
https://bibliotekanauki.pl/articles/243782.pdf
Data publikacji:
2015
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engine
combustion chamber
geometry
toxicity
Opis:
An important issue in construction of combustion chamber in compression-ignition engines is proper selection of its shape and size. Both features are dependent on several factors such as fuel injector location and angle, spray atomizer selection (amount of holes, their diameter and angular position), location of inlet valve and air turbulence. By doing research on prototype engine T370, an analysis of influence of combustion chamber size and its modifications going towards lip construction on flue gas toxicity was done. The diameter and depth of combustion chamber was being changed while maintaining the same compression ratio. After that, a modification of tested combustion chambers was made by creating so called “lip”, which aim was to create a swirl of injected fuel in the vertical plane. To visualize the changes in swirl, a numerical analysis of fuel injection into combustion chamber was made. In discussed study, emission tests were performed according to ECE-R49. During the research six combustion chambers with diameters 60, 63 and 66 mm (and their modification) were investigated. Tests were performed for several types of injectors and different injection timing. However, for analysis of combustion chamber size the results are presented for the same injectors but with optimized injection timing.
Źródło:
Journal of KONES; 2015, 22, 2; 104-108
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation prediction of operational parameters of a traction diesel engine with sequential rurbocharging at selection of turbochargers
Symulacyjne przewidywania parametrow pracy trakcyjnego silnika wysokopreznego z doladowaniem zakresowym przy doborze turbosprezarek
Autorzy:
Danilecki, K.
Powiązania:
https://bibliotekanauki.pl/articles/791980.pdf
Data publikacji:
2011
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
combustion engine
diesel engine
radial compressor
radial turbine
sequential turbo-charging
traction diesel engine
operational parameter
turbocharger
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2011, 11
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comperative analysis of emision from engine fuelled with diesel and bio-diesel
Autorzy:
Koszałka, G.
Hunicz, J.
Kordos, P.
Powiązania:
https://bibliotekanauki.pl/articles/242081.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engine
alternative fuel
bio-diesel
exhaust emissions
Opis:
The paper presents comparative analysis of operational parameters, smoke emission and toxic components contents in exhaust gases of a compression ignition engine fuelled with fossil diesel, commercial bio-diesel (fatty acid methyl ester) and their blend. Measurements were conducted on an older generation diesel engine equipped with in-line injection pump. Engine was operated in conditions of full load rotational speed characteristic and also ESC steady-state test cycle. Fourier Transform Infrared (FTIR) analytical system provided contents of 23 exhaust gas components. In particular chosen parameters of investigated fuels (on the base of quality reports), performance and fuel consumption characteristic versus rotational speed, smoke emission (D) and content of carbon monoxide (CO), unburned hydrocarbons (THC) and nitrogen oxides (NOx), sulphur dioxide (S02) and carbon dioxide (CO2) in exhaust gas of the engine fuelled with investigated fuels, emission of specific hydrocarbons of the engine fuelled with investigated fuels, of non-regulated compounds measured during the research, molar mass of analyzed exhaust compounds are presented in the paper.
Źródło:
Journal of KONES; 2009, 16, 3; 165-171
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dual - fuel low power generator with diesel engine using alternative fuels
Autorzy:
Imiołek, M.
Piętak, A.
Imiołek, A.
Powiązania:
https://bibliotekanauki.pl/articles/246549.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
alternative fuels
diesel engine
dual-fuel engine
biofuels
Opis:
At the moment, there is a growing interest in low-power generating units in dispersed system. The production of energy in small units located in the vicinity of the energy recipients offers considerable benefits. First and foremost, it lowers the cost of energy production and the cost of its transfer and also makes the recipient independent from the domestic supplier. Small cogeneration aggregates will facilitate the use of energy from dispersed renewable resources. Gas self-ignition engines in cogeneration system powered with biofuels can be used in construction industry as ecological sources of heat and electrical energy, limiting the need for fossil fuels. This paper presents the possibility of using alternative fuels for internal combustion engines. It describes the possibility of using liquid biofuels separately or natural gas fuel to power diesel engines in dual fuel system. The conception of supplying low-power generator with diesel engine with natural gas to a dose of liquid biofuels test case. Pointed to the factors determining the desirability of a particular concept. Indicated the modification of the engine power to supply the natural gas generator with a dose of liquid biofuels. New technologies of extracting and using biofuels and alternative fuels are being introduced and developed for generating heat and electric energy. Studies on the use of gas and liquid alternative fuels are directly linked to research on the production of renewable and alternative energy as well as environment protection by minimizing emissions of toxic substances into the atmosphere.
Źródło:
Journal of KONES; 2012, 19, 3; 171-176
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Elastyczność silnika ANDORIA 4CTi90
The flexibility of an engine ANDORIA 4CTi90
Autorzy:
Prajwowski, K.
Stoeck, T.
Powiązania:
https://bibliotekanauki.pl/articles/314207.pdf
Data publikacji:
2011
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
silnik Andoria
silnik wysokoprężny
Andoria engine
diesel engine
Opis:
W artykule opisana jest elastyczność silnika ANDORIA 4CTi90 obliczona na podstawie rzeczywistej charakterystyki prędkościowej ściągniętej na hamowni silnikowej AVL Dynoperform 160 w Katedrze Eksploatacji Pojazdów Samochodowych w Zachodniopomorskim Uniwersytecie Technologicznym w Szczecinie (była Politechnika Szczecińska).
In the article a flexibility of ANDORIA 4CTi90 engine is described which was calculated on speed characteristics taken or AVL Dynoperform 160 dynamometer in Faculty at Motor Vehicles Exploitation of West Pomeranian University of Technology, Szczecin (former Technical University of Szczecin).
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2011, 12, 5; 340-344
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A comparison of selected operating parameters of the diesel engine fuelled with mixtures of diesel oil or liquid bio - fuel and natural gas for low - power generators
Autorzy:
Boruta, G.
Imiołek, M.
Powiązania:
https://bibliotekanauki.pl/articles/241789.pdf
Data publikacji:
2012
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engine
dual-fuel engine
biofuels
alternative fuels
Opis:
Following the modern fuel market, one can notice that prices of liquid petroleum derivatives - petrol and diesel oil - which most often fuel piston internal combustion engines are increasingly higher. Similarly, the price of petroleum-derivative gas (LPG - the liquefied petroleum gas - simply speaking, a mixture of propane and butane) is also growing. Many academic and industrial institutions of science conduct research to determine whether it is possible to replace liquid petroleum-derivative fuels with some other potentially cheaper ones. It would also be beneficial if these new fuels were more "ecological" - so that their combustion products would not be harmful for the environment and if they were produced with the use of plants. Fuel stations commonly offer a fuel for diesel engines which is a mixture of fatty acids methyl esters (FAMEs) from vegetable oils, in Poland for instance from rape seeds. The paper presents a comparison of selected operating parameters of the Hatz 1B40 engine fuelled with mixtures of diesel oil or liquid bio-fuel and natural gas. Indicator diagrams, exhaust gases composition and vibration signals recorded on the engine body were analyzed. The study was conducted on the Hatz 1B40 diesel engine which is used among others in FOGO power generator sets, after replacing the original feeding system by common rail system for liquid fuels and after adding natural gas feeding system.
Źródło:
Journal of KONES; 2012, 19, 4; 111-116
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Water - fuel microemulsions influence on fuel consumption and exhaust gas emissions
Autorzy:
Cienciała, M.
Haller, P.
Jankowski, A.
Kardasz, P.
Powiązania:
https://bibliotekanauki.pl/articles/244361.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engine
diesel engine
microemulsion
fuel consumption
emissions
Opis:
Combustion in a diesel engine is a complex physicochemical process, changing the time at which the events take place simultaneously heat and mass transfer and chemical reactions. The development of internal combustion engines goes towards meeting the increasingly stringent requirements for toxic exhaust emissions, reducing fuel consumption and therefore reduce carbon emissions and protect the Earth's natural resources. The problem to solve in modern combustion engines is the emission of NOx. One way to reduce the emission of toxic NOx combustion engine power is water-hydrocarbon emulsions [1]. Research combustion engines water-hydrocarbon emulsions has been its tradition. So far, attempts were carried out using an emulsion obtained by a chemical. Emulsions of oil and water can be obtained by adding various detergents to prevent delamination of the oil and water. In this article, we consider the possibility of applying a mixture of water and oil as an alternative fuel used to power internal combustion engines used in heavy road transport. This work is preliminary work, also having to check whether this is the future direction of the work. The measurements of emissions of exhaust gases and fuel consumption. After analysing the test results confirmed that the improvement of the economic and environmental performance of modern diesel engines, it can be achieved by supplying synthetic diesel or gas oil water emulsions. It was found that the use of emulsion leads to a reduction of fuel consumption and NOx emissions.
Źródło:
Journal of KONES; 2013, 20, 3; 111-116
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A method for evaluating theoretical and real operation of diesel engines in energy conversion formulation taking into account their operating indices
Autorzy:
Girtler, J.
Powiązania:
https://bibliotekanauki.pl/articles/260600.pdf
Data publikacji:
2011
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
operation
energy
diesel engine
ship’s main engine
Opis:
The article proposes valuating the operation of an arbitrary diesel engine, based on the sample case of a ship’s main engine in which energy conversion processes take place in a given time. The above operation is understood as the energy transfer to the screw propeller in the given time in which the energy conversion into work and/or heat and its further transmission take place. The here proposed method for evaluating the operation of the main engines installed in marine power plants consists in comparing the operation of these engines to a physical quantity the measuring unit of which is the joule-second (joule×second). A new term is introduced which bears the name of the theoretical engine operation and is the standard (ideal) operation which can be compared to the operation of real engines revealing different levels of wear. It was shown that the calculations of the theoretical operation defined in the above way cannot make direct use of commonly known theoretical Diesel and Sabathe cycles. Instead they should use the cycles modified by heat abstraction taking place in accordance with the isobaric, or isothermal process. Other new terms introduced in the article are: the degree of excellence of energy conversion to work, considered as the measure of excellence of engine operation, and the degree of engine operation dissipation, being the measure of its real operation. It is shown that if in time t of engine operation the case takes place that: Li = idem and Le = idem, then the engine operation dissipation is equal to its mechanical efficiency.
Źródło:
Polish Maritime Research; 2011, 3; 31-36
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies