Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "wax" wg kryterium: Temat


Tytuł:
From a Noble Substance to an Imitative Body. The Image and Meaning of Wax Figures in a Votive Offering
Autorzy:
Jagla, Jowita
Powiązania:
https://bibliotekanauki.pl/articles/1798729.pdf
Data publikacji:
2019-10-30
Wydawca:
Katolicki Uniwersytet Lubelski Jana Pawła II. Towarzystwo Naukowe KUL
Tematy:
wax, wax figure, votive offering, iconography, symbolism
Opis:
The Polish version of the article was published in Roczniki Humanistyczne vol. 62, issue 4 (2014). In a wealth of votive gifts, the wax ones undoubtedly deserve special attention. They were common as early as in the Middle Ages, and they were used until the 20th century. There was a variety of such votive offerings, starting with candles, through lumps of wax, and ending with full-scale wax figures that started being used as a votive gesture at the break of the 13th and 14th centuries in the north of Europe. In the 15th and 16th centuries this custom became popular among the wealthy German, Austrian and Italian noblemen. Making wax votive figures took a lot of skill so they were made by specially qualified artists (in Italy wax figures called Boti were produced by sculptors called Cerajuoli or Fallimagini). Religious orders collaborated with the artists-artisans, undertaking to supply wax, whereas the artisans prepared wooden frames, natural hair, glass eyes, paints, textiles and brocade. In the following centuries, the production of wax figures developed ever more dynamically, especially in the north of Europe, with less skilled wax modellers, artisans and gingerbread makers often being their producers. The latter ones mainly made smaller wax figures, cast or squeezed from two-part concave models (this type of items in their form and type reminded of figures made of gingerbread). Wax votive figures (especially of children aged three to 12) funded in the area of Upper and Lower Franconia (the Bamberg and Würzburg dioceses) from the mid-19th to the mid-20th century are a separate and rather unusual phenomenon. Popularity of this votive offering became stable about 1880, in the years 1900–1910 it reached its climax; and in the 1950s it came to an end. Franconian offerings were always constructed in a similar way: they had wax faces and hands (more rarely feet), and the other members were made of wood, metal and some other padding materials. Dolls were a dominating model for the production of these votes, and that is why, like dolls, they had wigs made of natural hair on their heads, glass eyes and open mouths. A very important role was played by clothing, in which figures were willingly dressed; they were children’s natural, real clothes (girls were often dressed in the First Communion dresses); moreover, the effigies had complete clothing, which means they had genuine underwear, tights, leather shoes. The figures were supplied with rosaries and bouquets held in their hands, and on the heads of girls there were garlands. The figures were put in cabinets and glass cases, sometimes with wallpaper on the back wall, and they had a longer text on the front glass with the name of the child, or possibly of its parents, and the time when the figure was offered. Despite the many features making the Franconian offering deposits different from votive figures from other regions, all these items are joined by a timeless and universal idea, in which—to quote H. Belting—“an artificial body has assumed the religious representation of a living body…”
Źródło:
Roczniki Humanistyczne; 2019, 67, 4 Selected Papers in English; 59-79
0035-7707
Pojawia się w:
Roczniki Humanistyczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of Gas Products from Pyrolysis Process of Waxes Used in Lost-Wax Casting Technology
Autorzy:
Żymankowska-Kumon, S.
Kolczyk-Tylka, J.
Powiązania:
https://bibliotekanauki.pl/articles/106933.pdf
Data publikacji:
2018
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
lost-wax casting
foundry wax
gas chromatography
mass spectrometry
Opis:
Foundry waxes currently used in lost-wax casting technology are composed of paraffin, stearin, and – to a lesser extent – ceresin, polyethylene wax, and other natural and synthetic waxes. Most of these compounds are non-toxic; however, they may release aromatic hydrocarbons as a result of exposure to high temperatures. Based on a chromatographic analysis (pyrolysis gas chromatography-mass spectrometry, Py-GC/MS), the compounds that are separated from the popular wax mixtures used in foundries were evaluated (as well as the impact they may have on foundry workers). For this purpose, the three main stages of the process (wax, burnout, and pouring) were analyzed, and the appropriate test temperature was chosen (similar to the actual conditions during the process).
Źródło:
Journal of Casting & Materials Engineering; 2018, 2, 3; 53-56
2543-9901
Pojawia się w:
Journal of Casting & Materials Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Od substancji szlachetnej do ciała imitacyjnego. Obraz i znaczenie figur woskowych w geście wotywnym
From a Noble Substance to an Imitative Body. The Picture and the Meaning of Wax Figures in a Votive Gesture
Autorzy:
Jagla, Jowita
Powiązania:
https://bibliotekanauki.pl/articles/1887742.pdf
Data publikacji:
2014
Wydawca:
Katolicki Uniwersytet Lubelski Jana Pawła II. Towarzystwo Naukowe KUL
Tematy:
wosk
figura woskowa
wota
ikonografia
symbolika
wax
wax figure
votive gifts
iconography
symbolism
Opis:
W bogatym zbiorze darów wotywnych na niewątpliwą uwagę zasługują wota woskowe powszechne już od wczesnego średniowiecza i wykorzystywane po wiek XX. Wota te miały dużą różnorodność, począwszy od świec po bryły wosku, aż wreszcie woskowe figury często naturalnych rozmiarów, które zaczęły być wykorzystywane w geście wotywnym na przełomie XIII i XIV wieku na północy Europy. W XV i XVI wieku zwyczaj ten upowszechnił się wśród majętnej szlachty niemieckiej, austriackiej i włoskiej. Wykonanie woskowych figur wotywnych wymagało znacznej wprawy, dlatego wytwarzali je specjalnie wykwalifikowani artyści (we Włoszech figury woskowe zwane Boti wytwarzali twórcy określani mianem Cerajuoli albo Fallimagini), klasztory współpracowały z artystami - rzemieślnikami zobowiązując się dostarczać wosk, natomiast rzemieślnicy przygotowywali materiał, czyli drewniane stelaże, naturalne włosy, szklane oczy, farby, tekstylia i brokat. W kolejnych stuleciach produkcja wotów woskowych rozwijała się coraz prężniej, szczególnie na północy Europy, przy czym wytwórcami powyższych obiektów stawali się często mniej zdolni modelatorzy woskowi, rzemieślnicy i piernikarze. Ci ostatni wykonywali głównie figury woskowe o mniejszych rozmiarach, odlewane bądź wyciskane z dwuczęściowych wklęsłych modeli (ten typ wotów przypominał w swojej formie i ujęciu figury z pierników). Odrębne i dość niezwykłe zjawisko stanowią wotywne figury woskowe (szczególnie dzieci w wieku od trzech do dwunastu lat) fundowane na obszarze Górnej i Dolnej Frankonii (diecezje Bamberg i Wiirzburg) od połowy XIX stulecia do połowy wieku XX. Aktywizacja popularności tego gestu wotywnego okrzepła mniej więcej około 1880 roku, punkt kulminacyjny osiągnął on w latach 1900-1910 i skończył się w latach pięćdziesiątych XX stulecia. Frankońskie wota konstruowano zawsze w podobny sposób: miały one woskowe twarze i dłonie (rzadziej stopy), pozostałe zaś członki wykonywano z drewna, metalu i różnych materiałów wyściełających. Dominującym wzorem dla produkcji owych wotów były lalki, dlatego tak jak lalki miały one na głowach peruki z naturalnych włosów, szklane oczy i otwarte usta. Niezwykle ważną rolę pełniły ubrania, w które odziewano figury, będące naturalnymi, prawdziwymi strojami dzieci (dziewczynki chętnie ubierano w sukienki z pierwszej komunii); co więcej wota te posiadały strój kompletny, a więc ubierano je w autentyczną bieliznę, pończochy, skórzane buciki. Figury ozdabiano różańcami i bukietami kwiatków trzymanych w dłoniach, oraz wiankami na głowach wotów dziewczęcych. Figury ustawiano w szklanych gablotach, witrynach i kasetach wyklejanych niekiedy z tyłu tapetą i podpisywanych na przedniej szybie dłuższym tekstem, który wyjaśniał dane wotantów (imię i nazwisko dziecka, ewentualnie jego rodziców) i czas ofiarowania figury. Mimo wielu cech różniących frankońskie wota od wotywnych figur z innych regionów, wszystkie te obiekty łączy ponadczasowa i ponadterytorialna idea, w której cytując H. Beltinga „sztuczne ciało przejęło religijną reprezentację żywego ciała [...]”.
In a rich arsenal of votive gifts wax ones undoubtedly deserve a special attention. They were common as soon as early Middle Ages and they were used until the 20th century. There was a variety of such votes, starting with candles, through lumps of wax, and ending with full-scale wax figures that started being used as a votive gesture at the break of the 13th and 14th centuries in the north of Europe. In the 15th and 16th centuries this custom became popular among the wealthy German, Austrian and Italian noblemen. Making wax votive figures took a lot of skill so they were made by specially qualified artists (in Italy wax figures called “Boti” were produced by sculptors called “Cerajuoli” or “Fallimagini”). Religious orders collaborated with the artists-artisans, undertaking to supply wax, whereas the artisans prepared wooden frames, natural hair, glass eyes, paints, textiles and brocade. In the next centuries the production of wax votes developed ever more dynamically, especially in the north of Europe, with less skilled wax modelers, artisans and gingerbread bakers often being their producers. The latter ones mainly made smaller wax figures, cast or squeezed from two-part concave models (this type of votes in its form and type reminded of figures made of gingerbread). Wax votive figures (especially of children aged three to twelve) founded at the area of Upper and Lower Franconia (the Bamberg and Würzburg Dioceses) from the middle of the 19th to the middle of the 20th century are a separate and rather unusual phenomenon. Popularity of this votive gesture became stable about 1880, in the years 1900-1910 it reached its climax; and in the 1950s it came to an end. Franconian votes were always constructed in a similar way: they had wax faces and hands (more rarely feet), and the other members were made of wood, metal and some other padding materials. Dolls were a dominating model for the production of these votes, and that is why, like dolls, they had wigs made of natural hair on their heads, glass eyes and open mouths. A very important role was played by clothing, in which figures were willingly dressed; they were children’s natural, real clothes (girls were often dressed in the First Communion dresses); moreover, the votes had complete clothing, which means they had genuine underwear, tights, leather shoes. The figures were supplied with rosaries and bouquets held in their hands, and on the heads of girls there were garlands. The figures were put in cabinets and glass cases, sometimes with wallpaper on the back wall, and they had a longer text on the front glass with the name of the child, or possibly of its parents, and the time when the figure was offered. Despite the many features making the Franconian votes different from votive figures from other regions, all these object are joined by a timeless and universal idea, in which – quoting H. Belting – “an artificial body has assumed the religious representation of a living body (…)”.
Źródło:
Roczniki Humanistyczne; 2014, 62, 4; 89-110
0035-7707
Pojawia się w:
Roczniki Humanistyczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of Physical Properties of Wax Mixtures Obtained From Recycling of Patterns Used in Precision Casting
Ocena właściwości fizycznych mieszanek woskowych uzyskanych na drodze recyklingu modeli dla odlewnictwa precyzyjnego
Autorzy:
Biernacki, R.
Haratym, R.
Bałkowiec, A.
Wawulska-Marek, P.
Matysiak, H.
Zdunek, J.
Kurzydłowski, K. J.
Powiązania:
https://bibliotekanauki.pl/articles/354030.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
investment casting
wax pattern
wax blends
pattern properties
odlewanie
mieszanki wosku
ocena właściwości
mieszanina modelowa
Opis:
The study investigated the properties of selected certified mixtures used to make wax patterns for the production of precision castings for the aerospace industry. In addition, an assessment of the recycled mixtures consisting of certified wax materials recovered during autoclaving was carried out. Hardness was tested via a proposed method based on penetration, creep related deformation, bending strength and linear contraction. The hardness was studied on laboratory specimens and patterns made with the use of injection molding equipment. For these patterns, linear contraction was estimated at variable pressure and for different temperature injection parameters. Deformations connected with creep and resistance were evaluated on cylindrical specimens. Differences in creep resistance in relation to the hardness were observed depending on the type of pattern mixtures. Recycled mixture has a greater resistance and smaller linear contraction than certified mixtures used for making sprue, raisers and other parts of filler system.
W pracy zbadano właściwości wybranych mieszanek modelowych atestowanych stosowanych do wykonywania modeli wytapianych przy produkcji odlewów precyzyjnych dla przemysłu lotniczego. Dodatkowo badaniom poddano masę z recyklingu składająca się z odzyskanych w procesie autoklawizacji mieszanek woskowych atestowanych. Zaproponowano badania twardości metodą penetracji, odkształceń związanych z pełzaniem, wytrzymałości na zginanie oraz skurczu liniowego. Twardość badano na próbkach laboratoryjnych oraz na modelach wykonanych na wtryskarce przemysłowej. Dla tych modeli oszacowano skurcz liniowy przy zmiennych parametrach ciśnienia i temperatury wytrysku. Odkształcenia związane z pełzaniem i wytrzymałość badano na modelach walcowych. Obserwuje się różnice odporności na pełzanie w odniesieniu do twardości w zależności od rodzaju mieszanki modelowej. Masa z recyklingu ma większą odporność i mniejszy skurcz liniowy niż masa atestowana stosowana na układy wlewowe.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 1; 345-349
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania nad wytwarzaniem emulsji woskowych metodą emulgowania wysokociśnieniowego oraz ultradźwiękowego
Research on the production of wax emulsions with high-pressure and ultrasonic emulsification
Autorzy:
Antosz, A.
Ptak, S.
Powiązania:
https://bibliotekanauki.pl/articles/1835425.pdf
Data publikacji:
2017
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
emulsje
emulsje woskowe
emulsions
wax emulsions
Opis:
We wstępnej części artykułu przedstawiono cztery zasadnicze metody wytwarzania emulsji. W części doświadczalnej zaprezentowano wyniki badań nad sporządzaniem emulsji woskowych przy użyciu dwóch różnych technik emulgowania: wysokociśnieniowego i ultradźwiękowego z zastosowaniem jonowych i niejonowych emulgatorów. Dokonano porównania wybranych właściwości fizykochemicznych wytworzonych emulsji.
The first part of the paper presents four basic methods of producing emulsion. In the experimental part, are presented, results of the research on wax emulsion production conducted using two different emulsification techniques: high-pressure and ultrasonic with the use of ionic and non-ionic emulsifiers. A comparison was made of selected physico-chemical properties of the produced emulsion.
Źródło:
Nafta-Gaz; 2017, 73, 3; 200-207
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Detailed characterization of the substrate specificity of mouse wax synthase
Autorzy:
Miklaszewska, Magdalena
Kawiński, Adam
Banaś, Antoni
Powiązania:
https://bibliotekanauki.pl/articles/1039576.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
fatty alcohols
lipids
wax esters
acyl-CoA
Opis:
Wax synthases are membrane-associated enzymes catalysing the esterification reaction between fatty acyl-CoA and a long chain fatty alcohol. In living organisms, wax esters function as storage materials or provide protection against harmful environmental influences. In industry, they are used as ingredients for the production of lubricants, pharmaceuticals, and cosmetics. Currently the biological sources of wax esters are limited to jojoba oil. In order to establish a large-scale production of desired wax esters in transgenic high-yielding oilseed plants, enzymes involved in wax esters synthesis from different biological resources should be characterized in detail taking into consideration their substrate specificity. Therefore, this study aims at determining the substrate specificity of one of such enzymes -; the mouse wax synthase. The gene encoding this enzyme was expressed heterologously in Saccharomyces cerevisiae. In the in vitro assays (using microsomal fraction from transgenic yeast), we evaluated the preferences of mouse wax synthase towards a set of combinations of 11 acyl-CoAs with 17 fatty alcohols. The highest activity was observed for 14:0-CoA, 12:0-CoA, and 16:0-CoA in combination with medium chain alcohols (up to 5.2, 3.4, and 3.3 nmol wax esters/min/mg microsomal protein, respectively). Unsaturated alcohols longer than 18°C were better utilized by the enzyme in comparison to the saturated ones. Combinations of all tested alcohols with 20:0-CoA, 22:1-CoA, or Ric-CoA were poorly utilized by the enzyme, and conjugated acyl-CoAs were not utilized at all. Apart from the wax synthase activity, mouse wax synthase also exhibited a very low acyl-CoA:diacylglycerol acyltransferase activity. However, it displayed neither acyl-CoA:monoacylglycerol acyltransferase, nor acyl-CoA:sterol acyltransferase activity.
Źródło:
Acta Biochimica Polonica; 2013, 60, 2; 209-215
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Foliar Micromorphological and Architectural Studies of Glory Lily (Gloriosa superba L.) – An Important Medicinal Plant
Autorzy:
Manokari, M.
Shekhawat, Mahipal S.
Powiązania:
https://bibliotekanauki.pl/articles/1192844.pdf
Data publikacji:
2016
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Gloriosa superb
Stomatal morphology
Crystals
Cuticular Wax
Opis:
Foliar micromorphological study of plants describes the distinct structure and functions of foliar tissues. The structural analysis of G. superba epidermal tissues and leaf architecture revealed the stomatal type, morphology and their orientation, cuticular wax deposition, crystal arrangement and venation pattern. The stomatal density was observed maximum on abaxial epidermis. The epidermis contained ordered stomatal pattern with anomocytic stomata. The stomatal density and stomatal index was 12.0 and 29.0 respectively. The parallel lower order veins and perpendicular higher order veins form a grid-like network of venation pattern in G. superba. Con-vallaria type of cuticular wax was observed. The results of the foliar features could be applied in systematic studies and also to predict the environmental factors responsible for the development of certain leaf parameters.
Źródło:
World Scientific News; 2016, 59; 63-73
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ioannis Motsianos and Karen S. Garnett (Eds), "Glass, wax and metal: lighting technologies in late antique, byzantine and medieval times", Oxford: Archaeopress, 2019 – book review
Autorzy:
Chrzanovski, Laurent
Powiązania:
https://bibliotekanauki.pl/articles/1634104.pdf
Data publikacji:
2020-01-15
Wydawca:
Uniwersytet Warszawski. Wydawnictwa Uniwersytetu Warszawskiego
Tematy:
lighting technologies
Byzantine
late antique
medieval
wax
Źródło:
Polish Archaeology in the Mediterranean; 2019, 28(1); 671-673
1234-5415
Pojawia się w:
Polish Archaeology in the Mediterranean
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Cobalt Aluminate Content and Pouring Temperature on Macrostructure, Tensile Strength and Creep Rupture of Inconel 713C Castings
Autorzy:
Rakoczy, Ł.
Grudzień, M.
Cygan, R.
Zielińska-Lipiec, A.
Powiązania:
https://bibliotekanauki.pl/articles/356407.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
pouring
investment casting
lost wax
superalloy
creep
Opis:
The effect of cobalt aluminate inoculant addition and melt-pouring temperature on the structure and mechanical properties of Ni-based superalloy was studied. The first major move to control the quality of investment cast blades and vanes was the control of grain size. Cobalt aluminate (CoAl2 O4 ) is the most frequently utilized inoculant in the lost-wax casting process of Ni-based superalloys. The inoculant in the prime coat of moulds and pouring temperature play a significant role in grain size control. The finest surface grains were obtained when the internal surface of shell mould was coated with cobalt aluminate and subsequently pouring was at 1480°C. The influence of selected casting parameters and inoculant addition on mechanical properties was investigated on the basis of tensile, creep and hardness testing. The effect of grain refinement on mechanical properties were consistent with established theories. Tests conducted at ambient temperature indicated a beneficial effect of grain refinement both on tensile strength and hardness. In contrast at elevated temperature during creep, the reverse trend was observed.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1537-1545
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ wybranego modyfikatora na właściwości asfaltu
The influence of the synthetic wax on rheological properties of bitumen
Autorzy:
Iwański, M.
Mazurek, G.
Powiązania:
https://bibliotekanauki.pl/articles/144058.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Komunikacji Rzeczpospolitej Polskiej
Tematy:
asfalt
wosk syntetyczny
reologia
asphalt
synthetic wax
rheology
Opis:
Celem badań była analiza wpływu nowoczesnego wosku alifatycznego na wybrane cechy lepko-sprężyste asfaltu. Przygotowano sześć wariantów modyfikacji poprzez dozowanie dodatku wosku syntetycznego, w zakresie od 1,5%(m/m) do 4%(m/m) ze zmianą co 0,5%(m/m). Temperatura badania została ustalona w zakresie od 50°C do 145°C. Wyniki przeprowadzonych badań ujawniły, że zastosowany modyfikator istotnie wpływa na oceniane właściwości reologiczne już przy zawartości około 1% w stosunku do masy modyfikowanego asfaltu.
The purpose of research was the analysis of the effect of modern synthetic wax on some rheological properties of bitumen. Six variants of the modification were prepared by application the synthetic wax in the range of 1,5% to 4% with changes every 0,5%. The temperature of examination was established in the scope from 50°C to 145°C. It was determined that the modifier indeed influences on examined rheological parameters of bitumen in amount of 1 % in relation to the bitumen.
Źródło:
Drogownictwo; 2011, 10; 313-317
0012-6357
Pojawia się w:
Drogownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rola pszczół i wosku pszczelego w tworzeniu głagolickich liter
The Role of Bees and Beeswax in Creating Glagolitic Letters
Autorzy:
Mikołajczak, Aleksander Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/1890685.pdf
Data publikacji:
2021-09-22
Wydawca:
Uniwersytet im. Adama Mickiewicza w Poznaniu
Tematy:
Glagolitic
St. Cyril the Philosophe
wax tablets
writing
bees
Opis:
The article shows what role the writing instruments, in particular wax tablets, used by St. Cyril the Philosopher, could play in shaping the material form of Glagolitic writing. In this research approach, writing is treated not only as a system of abstract signs, but also as their factual figure formed by a tool on a writing material. In the case of the Glagolitic alphabet, its creation was therefore both a mental and physical process involving objects such as wax tablets. The ease of engraving the shapes of new letters on a soft surface and the possibility of repeatedly erasing them allowed Cyril to experiment with their forms without consuming valuable parchment. Therefore, this process depended mainly on the material properties of the wax produced by honeybees, which was used to cover the wooden tablets designed for writing with a stylus. In this way, these insects participated in the creation of the material dimension of Slavic writing, on a par with people who took the stick from them, choosing the wax from the hives to further process it. This proves that Cyril did not force the Glagolitic letters formed in his mind onto passive material, but that beeshaped, writing wax affordances actively cooperated in this process.
Źródło:
Poznańskie Studia Slawistyczne; 2021, 20; 239-257
2084-3011
Pojawia się w:
Poznańskie Studia Slawistyczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Mould Material on the Mechanical Properties of Wax Models
Autorzy:
Kroma, Arkadiusz
Brzęk, P.
Powiązania:
https://bibliotekanauki.pl/articles/2079829.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
FDM
Fused Deposition Modeling
investment casting
wax models
mechanical properties
wax injection dies
odlewanie inwestycyjne
modele woskowe
właściwości mechaniczne
matryce do wtrysku wosku
Opis:
The article presents results of research on the influence of the mould material on selected mechanical properties of wax models used for production of casting in investment casting method. The main goal was to compare the strength and hardness of samples produced in various media in order to analyse the applicability of the 3D printing technology as an alternative method of producing wax injection dies. To make the wax injection dies, it was decided to use a milled steel and 3D printed inserts made using FDM (Fused Deposition Modeling) / FFF (Fused Filament Fabrication) technology from HIPS (High Impact Polystyrene) and ABS (Acrylonitrile Butadiene Styrene). A semi-automatic vertical reciprocating injection moulding machine was used to produce the wax samples made of Freeman Flakes Wax Mixture – Super Pink. During injection moulding process, the mould temperature was measured each time before and after moulding with a pyrometer. Then, the samples were subjected to a static tensile test and a hardness test. It was shown that the mould material influences the strength properties of the wax samples, but not their final hardness.
Źródło:
Archives of Foundry Engineering; 2021, 21, 3; 48-52
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie wpływu ciśnienia i temperatury na proces wytrącania parafin w ropie naftowej
Investigation of the influence of pressure and temperature on paraffin wax deposition in crude oil
Autorzy:
Szuflita, S.
Kuśnierczyk, J.
Powiązania:
https://bibliotekanauki.pl/articles/1835451.pdf
Data publikacji:
2017
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
parafiny
WAT
depozycja stałej fazy parafinowej
paraffins
paraffin wax deposition
Opis:
W publikacji rozważono tematykę wpływu ciśnienia i temperatury na wytrącanie się osadów parafinowych z płynów złożowych. Scharakteryzowano ważniejsze metody badawcze służące do określania temperatury depozycji stałej fazy parafinowej (Wax Apperance Temperature – WAT). Wykorzystując odpowiednio zmodyfikowaną aparaturę PVT, wyznaczono temperaturę początku wytrącania się parafiny (WAT), z uwzględnieniem wpływu ciśnienia i rozpuszczonego gazu w próbce ropy. Wykonane badania pozwoliły na określenie warunków równowagowych (w układzie ciśnienie–temperatura), przy których ma miejsce depozycja stałej fazy parafinowej. Na podstawie przeprowadzonych eksperymentów wyznaczona została granica rozdzielająca obszar parafinowy (występowanie parafin w fazie stałej) od obszaru bez parafiny. Dokładne określenie stref (w zakresie ciśnienia i temperatury) powstawania osadów parafinowych jest istotnym zagadnieniem w planowaniu wydobycia i transportu węglowodorów. Pozwala to uniknąć trudności w utrzymaniu przepływu wynikających z obecności parafinowego osadu oraz kosztów związanych z jego usuwaniem.
In this paper, the issue of pressure and temperature influence on paraffin wax deposition in reservoir fluids was raised. Typical research methods for determining wax appearance temperature (WAT) were briefly characterized. The wax appearance temperature was studied taking into account, pressure and the amount of gas dissolved in oil samples using a suitably modified PVT apparatus. Investigations performed allowed to determine the equilibrium conditions (of PT) at which the deposition of paraffin waxes occurs. On the basis of the conducted research, there was a zone determined with wax deposition hazard and another one without a risk of solid wax precipitation. The precise determination of wax precipitation zones is a significant issue in the planning of recovery and transport of hydrocarbons. It allows to avoid flow assurance problems caused by solid wax deposits, as well as the cost generated for their elimination.
Źródło:
Nafta-Gaz; 2017, 73, 6; 395-404
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structuring role of F-T synthetic wax in bitumen
Autorzy:
Iwański, M.
Mazurek, G.
Powiązania:
https://bibliotekanauki.pl/articles/202273.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bitumen
synthetic wax F-T
ductility
rheology
morphology
group type
Opis:
The reduction in asphalt mixture production and placement temperatures can be achieved by modifying bitumen 35/50 with the Fischer-Tropsch synthetic wax. To identify the role this modifier plays in the bitumen 35/50, a series of tests has been performed. The experiment was carried out for wax doses from 1.5% to 4.0%. Analysis of the modified binder properties such as ductility at 5, 15 and 25◦C, complex modulus G* with the parameter G*/sinx and LSV, susceptibility according to MSCR procedure, morphology and group type analysis helped describe the structuring function of the F-T wax in the binder. The optimum F-T wax content of 2.5% has been identified to provide the desired parameters required for modified binders.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2014, 62, 3; 525-534
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania możliwości powtórnego wykorzystania surowców odpadowych powstających w trakcie produkcji świec
Studies on the possibilities of reusing waste materials generated during candle production
Autorzy:
Antosz, Artur
Ptak, Stefan
Powiązania:
https://bibliotekanauki.pl/articles/31344048.pdf
Data publikacji:
2022
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
świeca
woski
masa palna
dekoloryzacja
candle
wax
flammable masse
discoloration
Opis:
W artykule omówiono dostępne surowce do komponowania mas palnych do produkcji świec, poczynając od różnego rodzaju wosków przez oleje roślinne po utwardzone oleje roślinne, oraz przedstawiono badania nad odbarwianiem i odwanianiem odpadowych mas palnych metodą rafinacji adsorpcyjnej ziemią odbarwiającą i węglem aktywnym. W procesach tych wykorzystywana jest zdolność glin naturalnych, glinokrzemianów syntetycznych, żelu glinowego, węgla aktywnego i innych substancji do adsorbowania na swojej powierzchni niektórych składników i zanieczyszczeń. Procesy rafinacji adsorpcyjnej ziemią bielącą i węglem aktywnym przeprowadzono dla wszystkich badanych surowców. Zrealizowano pięć procesów rafinacji adsorpcyjnej przy różnych parametrach temperaturowych przebiegu rafinacji z różnymi ilościami dozowania sorbentów. Procesy rafinacji ziemią bielącą prowadzono w dwóch stopniach. Następnie próbki oczyszczanych mas palnych zostały poddane ocenie wizualnej, zapachowej oraz zostały oznaczone wybrane podstawowe właściwości fizykochemiczne charakteryzujące masy palne do produkcji świec. Najlepsze efekty uzyskano w przypadku procesu rafinacji numer V, podczas którego zastosowano dozowanie ziemi bielącej na poziomie 4% (m/m) i 2% (m/m) węgla aktywnego, w temperaturze 130°C. W wyniku procesu o powyższych parametrach otrzymano po pierwszym stopniu biały kolor w próbce pomarańczowej i bardzo jasnożółty w próbce zielonej. Próbka koloru czerwonego zmieniła kolor na pasteloworóżowy. Po drugim stopniu rafinacji próbka pomarańczowa była śnieżnobiała, a próbka zielona została odbarwiona do koloru białego. Próbki pomarańczowa i zielona miały bardzo słaby zapach, natomiast próbka czerwona wykazywała zapach na poziomie słabym. Proces rafinacji adsorpcyjnej oprócz działania odbarwiającego pozwalał również na znaczne pozbycie się substancji zapachowych obecnych w badanych próbkach. Najtrudniejsza do odbarwienia okazała się próbka o kolorze czerwonym, z równie trudnym do usunięcia aromatem kwiatów róży. Przeprowadzone badania pozwoliły na potwierdzenie bardzo dużego potencjału do odbarwiania i odwaniania odpadowych mas palnych metodą rafinacji adsorpcyjnej ziemią odbarwiającą i węglem aktywnym.
The paper discusses available raw materials for composition of combustible masses for candle production starting from various kinds of waxes through vegetable oils to hardened vegetable oils, and presents research into decolorization and dehydration of waste combustible masses by adsorption refining with decolorizing earth and activated carbon. These processes use the ability of natural clays, synthetic aluminosilicates, aluminum gel, activated carbon and other substances to adsorb certain components and contaminants on their surface. The adsorption refining processes with bleaching earth and activated carbon have been performed for all the raw materials studied. Five adsorption refining processes were carried out under different temperature parameters of refining with different dosage amounts of sorbents. The bleaching earth refining processes were carried out in two stages. Then, the samples of the purified combustible masses were subjected to visual and olfactory evaluation and selected basic physicochemical properties characterizing the combustible masses for candle production were determined. The best results were obtained for refining process number V during which the dosage of bleaching earth was applied at the level of 4% (m/m) and 2% (m/m) of activated carbon, at the temperature of 130°C. The process with the above parameters resulted in a white color in the orange sample after the first step and a very light yellow color in the green sample. The red sample turned pastel pink. After the second refining step, the orange sample was snow white and the green sample was discolored to white. The orange and green sample had a very faint odor, while the red sample showed a faint odor. The adsorption refining process, in addition to the decolorization effect, also allowed the odorants present in the test samples to be significantly removed. Red color sample turned out to be the most difficult to decolorize with rose flower aroma equally difficult to remove. The conducted tests allowed us to confirm the very high potential for decolorization and deodorization of waste combustible masses by adsorption refining with decolorizing earth and activated carbon.
Źródło:
Nafta-Gaz; 2022, 78, 10; 760-775
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of drought stress on wettability of barley leaf surface
Wpływ stresu suszy na zwilżalność powierzchni liści jęczmienia
Autorzy:
Lukowska, M.
Powiązania:
https://bibliotekanauki.pl/articles/36073.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
higher plant
leaf
wax
drought stress
wettability
barley
leaf surface
Opis:
The aim of the study was to determine the changes of plant surface wettability caused by environmental drought stress. Two Polish cultivars of spring barley (Hordeum vulgare) Poldek and Stratus were tested. The low soil moisture was stabilised at pF 3.5 while the control soil moisture at pF 2.2. The wettability was determined by water contact angle. The measurements were performed on fresh leaves before and after washing in chloroform. Generally, drought led to hydrophobisation of the surface of plant leaves. The use of chloroform caused greater changes in contact angle values for stressed than for control plants, but this reaction was variety-specific and leaf-age dependent.
Celem badań było określenie zmian zwilżalności powierzchni liści jęczmienia spowodowane stresem suszy. Badano dwie polskie odmiany jęczmienia jarego (Hordeum vulgare) – Poldek i Stratus. Warunki niskiej wilgotności gleby ustalono przy pF 3.5, natomiast warunki kontrolne przy pF 2.2. Jako miarę zwilżalności powierzchni zastosowano statyczny kąt zwilżania wodą. Pomiary wykonano na żywych liściach przed i po ekstrakcji wosków za pomocą chloroformu. Stres suszy prowadził do dalszej hydrofobizacji powierzchni liści badanych roślin. Zastosowanie chloroformu spowodowało zmiany wartości kąta zwilżania dla roślin poddanych stresowi oraz dla roślin kontrolnych. Reakcja roślin na warunki stresu środowiskowego różniła się w zależności od odmiany jęczmienia oraz wieku liści.
Źródło:
Acta Agrophysica; 2015, 22, 3
1234-4125
Pojawia się w:
Acta Agrophysica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The effect of rubber and synthetic wax on the selected properties of bitumen 50/70
Wpływ gumy i syntetycznego wosku na wybrane właściwości asfaltu 50/70
Autorzy:
Iwański, M.
Orzechowski, R.
Powiązania:
https://bibliotekanauki.pl/articles/402393.pdf
Data publikacji:
2014
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
bitumen
rubber modification
synthetic wax
asfalt
modyfikacja gumy
wosk syntetyczny
Opis:
This article presents the results and the analysis of the study of the impact of rubber and synthetic wax on the properties of bitumen 50/70 with an addition of 5÷20% of granular rubber and 1÷2% of synthetic wax. The tests conducted within the study measured penetration, softening point, Fraass breaking point, elastic recovery and dynamic viscosity. Based on the study, the penetration index and the plasticity temperature range were calculated. The results show that the rubber modified with synthetic wax significantly improves the properties of bitumen 50/70.
Źródło:
Structure and Environment; 2014, 6, 2; 5-10
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Casting Technology Experiment and Computer Modeling of Ornaments from Bronze Age
Autorzy:
Garbacz-Klempka, A.
Suchy, J. S.
Kwak, Z.
Długosz, P.
Stolarczyk, T.
Powiązania:
https://bibliotekanauki.pl/articles/353122.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
archeometallurgy
copper alloys
investment casting technology
lost-wax casting
modeling
Opis:
The casting workshop was discovered with numerous artifacts, confirming the existence of the manufacturing process of metal ornaments using ceramic molds and investment casting technology in Lower Silesia (Poland) in 7-6 BC. The research has yielded significant technological information about the bronze casting field, especially the alloys that were used and the artifacts that were made from them. Based on the analyses, the model alloys were experimentally reconstructed. Taking advantage of the computer-modeling method, a geometric visualization of the bronze bracelets was performed; subsequently, we simulated pouring liquid metal in the ceramic molds and observed the alloy solidification. These steps made it possible to better understand the casting processes from the perspective of the mold technology as well as the melting and casting of alloys.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 3; 1329-1337
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania laboratoryjne określające wzrost potencjału parafinowania wraz ze spadkiem temperatury
Laboratory studies for the determination of the increase in the wax formation potential associated with the decrease in the temperature
Autorzy:
Szuflita, S.
Kuśnierczyk, J.
Wojnicki, M.
Warnecki, M.
Powiązania:
https://bibliotekanauki.pl/articles/1835111.pdf
Data publikacji:
2018
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
parafiny
WAT
WPC
depozycja stałej fazy parafinowej
paraffins
paraffin wax deposition
Opis:
W publikacji rozważono tematykę wpływu ciśnienia i temperatury na wytrącanie się osadów parafinowych z płynów złożowych. Wymieniono ważniejsze metody badawcze służące do określania temperatury depozycji stałej fazy parafinowej (wax appearance temperature – WAT). Omówiono metody pozwalające na wyznaczenie krzywej wytrącania parafiny – WPC (wax precipitation curve). Wykorzystując odpowiednio zmodyfikowaną aparaturę PVT, określono temperaturę początku wytrącania się parafiny (WAT), poniżej której na specjalistycznym filtrze wychwycono stałą fazę parafinową w różnych temperaturach. Na podstawie przeprowadzonych eksperymentów wyznaczona została granica rozdzielająca obszar parafinowy (występowanie parafin w fazie stałej) od obszaru bez parafiny. Pomiary ilości parafiny z wykorzystaniem filtra pozwoliły na wyznaczenie krzywej WPC, dzięki której otrzymujemy dodatkowe dane o ilości wytrąconego osadu parafinowego poniżej WAT. Szczególną zaletą opisanych badań jest możliwość wykonania pomiarów w szerokim zakresie ciśnień oraz nasycenie badanej próbki gazem złożowym, co pozwala na uzyskanie takiej próbki ropy, jaka występuje w rzeczywistych warunkach eksploatacyjnych. Większość znanych na świecie sposobów badań nie umożliwia takiego przygotowania próbki oraz pomiaru pod wpływem ciśnienia, tym samym otrzymane wyniki obarczone są błędem. Aspektem ekonomicznym stosowania omawianego sposobu jest możliwość prowadzenia eksploatacji z zachowaniem optymalnych warunków ciśnienia i temperatury, w których badane zjawisko nie zachodzi lub jest minimalne. Znajomość przebiegu krzywej wytrącania parafin (WPC) jest niezbędna do wybrania optymalnej, w danych warunkach, metody przeciwdziałania powstawaniu wytrąceń parafinowych blokujących przepływ mediów złożowych. Opracowany sposób pomiaru daje możliwość określenia skuteczności działania specjalistycznych inhibitorów parafin i asfaltenów oraz wyznaczenia ich optymalnego dawkowania. Takie podejście pozwala zarówno na ograniczenie kosztów, jak też na zminimalizowanie ryzyka zablokowania przepływu ropy z jednoczesnym zachowaniem ciągłości produkcji.
In this paper, the issue of pressure and temperature influence on the paraffin wax deposition in reservoir fluids was raised. Typical research methods for determining wax appearance temperature (WAT) were briefly characterized. Methods for the determination of wax precipitation curve (WPC) were discussed. Using the appropriately modified PVT apparatus the wax appearance temperature was determined, below which a solid waxy phase at various temperatures was captured on a specialized filter. On the basis of the research carried out, the boundary separating the wax deposition hazard zone (the occurrence of solid paraffin waxes) from the zone without wax was determined. Measurements of the amount of wax allowed to determine the WPC curve, thanks to which the additional data concerning the amount of solid wax deposited below WAT were obtained. A special advantage of the method is its ability to perform measurements in a wide range of pressures and the saturation of the tested sample with reservoir gas, which allows obtaining a sample of crude oil that occurs in real operating conditions. Most of the known research methods in the world do not allow for such sample preparation and measurement under pressure, thus the results obtained are flawed to a certain extent. The economic aspect of the discussed method is the ability to conduct operations while maintaining optimal pressure and temperature conditions in which the studied phenomenon does not occur or is minimal. Knowledge of the wax precipitation curve – WPC is necessary to select the optimal method for counteracting the formation of paraffin precipitates, which are blocking the flow of reservoir fluids for given conditions. The developed method of measurement gives the possibility to determine the effectiveness of specialist paraffin and asphaltene inhibitors and to determine their optimal dosage. This approach allows to reduce costs as well as minimize the risk of blocking oil flow while maintaining production continuity.
Źródło:
Nafta-Gaz; 2018, 74, 10; 759-767
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Temperature-dependent regulatory mechanism of larval development of the wax moth (Galleria mellonella).
Autorzy:
Cymborowski, Bronisław
Powiązania:
https://bibliotekanauki.pl/articles/1044435.pdf
Data publikacji:
2000
Wydawca:
Polskie Towarzystwo Biochemiczne
Tematy:
ecdysteroids
brain proteins
larval diapause
physiology
wax moth
Galleria mellonella
storage proteins
Opis:
The mechanisms underlying larval diapause in the wax moth (Galleria mellonella) is one of the most throughly studied aspects. At the low temperature of 18°C, the last instar larvae did not pupate but transferred to 30°C they initiated development and pupation in a circadian manner. Different types of surgical manipulations including head-ligation, nerve cord-severance, implantation of the brain, prothoracic glands, accompanied with ecdysteroid titre measurements indicated that diapausing arrest of larval development at 18°C might be due to the nervous inhibition of their prothoracic glands.
Źródło:
Acta Biochimica Polonica; 2000, 47, 1; 215-221
0001-527X
Pojawia się w:
Acta Biochimica Polonica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Klasyfikacja osadów deponowanych w instalacjach kopalnianych pod kątem doboru metod ich usuwania
Classification of sediments deposited in mining installations in terms of the selection of methods for their removal
Autorzy:
Kluk, D.
Powiązania:
https://bibliotekanauki.pl/articles/1835262.pdf
Data publikacji:
2018
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
ropa naftowa
osady
asfalteny
parafina
sole
crude oil
deposits
asphaltene
wax
salts
Opis:
W artykule przedstawiono zagadnienia związane z depozycją osadów w instalacjach transportujących ropę naftową i gaz ziemny. Omówiono czynniki wpływające na rodzaj deponowanych osadów. Szczególną uwagę zwrócono na osady parafinowoasfaltenowe, solne oraz inne – pochodzenia zarówno organicznego, jak i nieorganicznego. Istotnym zagadnieniem przedstawionym w artykule jest opis sposobów likwidowania zdeponowanych w instalacjach osadów. Materiał badawczy stanowiły osady zdeponowane w instalacjach kopalnianych. Na podstawie wyników fizycznych i chemicznych badań osadów zaproponowano dobór metod ich usuwania. Zaproponowane metody usuwania osadów dostosowane są indywidualnie do rodzaju osadu. Wybór metody dokonano na podstawie: oceny składu osadów zdeponowanych w rurociągach w powiązaniu z zawartością parafin, żywic, asfaltenów i węglowodorów aromatycznych, wyników efektywności rozpuszczania osadów w różnych rozpuszczalnikach w temperaturach 20°C i 50°C, podatności na biodegradację osadów, określonej podczas testów respirometrycznych, szybkość biodegradacji substancji ropopochodnych analizowano, wykorzystując zestaw OxiTop Control. W artykule przedstawiono również wytyczne postępowania związane z ograniczeniem deponowania osadów podczas wydobywania i transportu ropy naftowej. Na podstawie uzyskanych wyników eksperymentów sformułowano wnioski dotyczące zagadnień związanych z problematyką depozycji osadów w instalacjach transportujących płyny złożowe oraz określono wytyczne, zmierzające do zapobiegania ich powstawaniu.
The article discusses the issues associated with the deposition of sediments in pipelines. The factors influencing the type of deposited sediments are discussed. Particular attention has been paid to paraffin-asphaltic, salt and other organic and inorganic sources. An important issue described in the article, is the description of ways of liquidating sediments deposited in installations. The research material were sediments deposited in mine installations. Based on the results of physical and chemical tests of sediments, the methods of removing them were proposed. The proposed methods of removing sediments are adapted individually to the type of sediment. The choice was based on: evaluation of sediment deposited in pipelines in relation to the content of paraffin, resins, asphaltenes and aromatic hydrocarbons, results of solubilization efficiency in various solvents at 20°C and 50°C, susceptibility to biodegradation of sediments identified during respirometry tests; the rate of biodegradation of petroleum substances was analyzed using the OxiTop Control set. The article also presents guidelines for the reduction of sediment deposition during the extraction and transportation of crude oil. Based on the results of the experiments, conclusions were drawn on issues related to the deposition of sediments in fluid bed conveyor systems and guidelines were defined to prevent their formation.
Źródło:
Nafta-Gaz; 2018, 74, 3; 193-200
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of Investment Casting Technology from Bronze Age. Casting Workshop in Grzybiany (Southwest Poland)
Autorzy:
Garbacz-Klempka, A.
Suchy, J. S.
Kwak, Z.
Tokarski, T.
Klempka, R.
Stolarczyk, T.
Powiązania:
https://bibliotekanauki.pl/articles/352158.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
archeometallurgy
copper alloys
investment casting technology
lost wax casting
x-ray spectroscopy
Opis:
Investment casting technology that utilizes lost-wax casting is one of the most-important achievements of ancient society. In Lower Silesia, Poland (Grzybiany, Legnica county), a 7-6 BC casting workshop was discovered with numerous artifacts, confirming the existence of the manufacturing process of metal ornaments using ceramic molds. The paper presents the research of molds and casts from the Bronze and Early Iron Ages. Microscopic analyses of the casting molds were performed, along with radiographic and chemical composition tests of the artifacts (the latter employing the use of the X-ray fluorescence spectroscopy method). The clustering method was used for alloy classification. The microstructure was analyzed by means of Scanning Electron Microscopy with Energy Dispersive Spectroscopy. Conclusions from the research were utilized in further experiments.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 615-624
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rapid Prototyping of wax foundry models in an incremental process
Szybkie prototypowanie woskowych modeli odlewniczych w procesie przyrostowym
Autorzy:
Kozik, B.
Budzik, G.
Dziubek, T.
Grzelka, M.
Tutak, M.
Powiązania:
https://bibliotekanauki.pl/articles/380752.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
rapid prototyping
wax models
model 3D-CAD
prototypowanie szybkie
model woskowy
Opis:
The paper presents an analysis incremental methods of creating wax founding models. There are two methods of Rapid Prototyping of wax models in an incremental process which are more and more often used in industrial practice and in scientific research. Applying Rapid Prototyping methods in the process of making casts allows for acceleration of work on preparing prototypes. It is especially important in case of element having complicated shapes. The time of making a wax model depending on the size and the applied RP method may vary from several to a few dozen hours.
Artykuł przedstawia analizę przyrostowych metod wytwarzania woskowych modeli odlewniczych. W praktyce przemysłowej i badaniach naukowych stosuje się coraz częściej metody szybkiego prototypowania modeli woskowych w procesie przyrostowym. Zastosowanie metod RP w procesie wytwarzania odlewów pozwala na przyspieszenie prac nad przygotowaniem prototypów. Jest to szczególnie ważne w przypadku elementów o skomplikowanych kształtach. Czas wykonania modelu woskowego w zależności od gabarytów i zastosowanej metody Rapid Prototyping może wynieść od kilku do kilkudziesięciu godzin.
Źródło:
Archives of Foundry Engineering; 2011, 11, 2 spec.; 113-116
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An influence of contemporary oil coatings on the aesthetical properties and abrasion resistance of oak wood parquets
Autorzy:
Ślusarczyk, Karol
Różańska, Anna
Powiązania:
https://bibliotekanauki.pl/articles/2200146.pdf
Data publikacji:
2020
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
oak wood
resistance
properties
single-ingredient oil
two-ingredient oil
wax oil
Opis:
An influence of contemporary oil coatings on the aesthetical properties and abrasion resistance of oak wood parquets. The article analyses the influence of oil coatings on the colour, gloss, and abrasion resistance of parquets made of oak wood. Popular oil coatings of the same brand were compared: two-ingredient oil, single-ingredient oil and wax oil. A comparison of properties of several different kinds of oil manufactured by the same brand reveals that they do have influence on the changes in wood properties, when comparing to wood without finish. Single-ingredient and two-ingredient oil darken the colour, increase in red colour and in yellow colour to a similar extent, while wax oil darkens it and increase the share of red and yellow colour less. As to gloss, there are no statistically significant differences between the influence of the different oils. Two-ingredient oil practically does not change resistance to abrasion at all, while single-ingredient oil and wax oil reduce the rate of abrasion, and wax oil reduces abrasion 4 times less efficiently than single-ingredient oil.
Wpływ współczesnych powłok olejowych na właściwości estetyczne i ścieralność posadzek z drewna dębowego. Porównanie właściwości poszczególnych rodzajów oleju, produkowanych przez tą samą markę, dowodzi różnego ich wpływu na zmiany właściwości drewna wykończonego w porównaniu do drewna niewykończonego. Olej jedno i dwuskładnikowy przyciemniają barwę oraz zwiększają udział barwy czerwonej i żółtej w podobnym stopniu, a olejowosk w stosunku do w mniejszym stopniu. W przypadku połysku nie ma ewidentnie istotnych statystycznie różnic pomiędzy wpływem poszczególnych olejów. Olej dwuskładnikowy praktycznie nie ma wpływu na zmianę ścieralności, a olej jednoskładnikowy i olejowosk zmniejszają ścieralność, lecz w stosunku do oleju jednoskładnikowego olejowosk zmniejsza ścieralność czterokrotnie mniej.
Źródło:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology; 2020, 111; 83--93
1898-5912
Pojawia się w:
Annals of Warsaw University of Life Sciences - SGGW. Forestry and Wood Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The assessment of the resilient modulus of elasticity of asphalt concrete with low-viscosity modifier
Badania modułu sztywności sprężystej betonu asfaltowego z asfaltem niskowiskozowym
Autorzy:
Mazurek, G.
Powiązania:
https://bibliotekanauki.pl/articles/402471.pdf
Data publikacji:
2011
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
moduł sztywności sprężystej
nawierzchnia
wosk syntetyczny
resilient modulus of elasticity
surface
synthetic wax
Opis:
Based on the experiments it was found that the operating temperature significantly influenced the resilient modulus of elasticity of asphalt concrete. The study was intended for asphalt concrete used for the wearing course AC 11 S. In the experiment bitumen 35/50 was used which was modified with synthetic wax (Fisher-Tropsh) in the range of 1.5% - 4.0% with steps every 0.5%. The asphalt concrete has been compacted at the optimum characteristic temperature of 125°C. The study revealed a low susceptibility of temperature of asphalt concrete with asphalt low-viscosity in the range of 5°C to 25°C. In addition a negative impact of the lack of compaction level on resilient modulus of elasticity of the asphalt concrete was found.
Źródło:
Structure and Environment; 2011, 3, 1; 16-20
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies