Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "water dispersion" wg kryterium: Temat


Wyświetlanie 1-10 z 10
Tytuł:
Wpływ montmorylonitu na właściwości reologiczne wodnych dyspersji karboksymetyloskrobi
Influence of montmorillonite on the rheological properties of water disperisons of carboxymethyl starch
Autorzy:
Antosik, A. K.
Powiązania:
https://bibliotekanauki.pl/articles/172201.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Chemiczne
Tematy:
karboksymetyloskrobia
montmorylonit
wodne dyspersje
carboxymethyl starch
montmorillonite
water dispersion
Opis:
Water dispersions are usually a colloidal system in which one of the phases is highly dispersed in a second of a continuous nature, called a dispersion medium (in this case it is water). Dispersal is also called the process of distraction and self- -disperse as such. Water dispersions of carboxymethyl starch are the basis for the preparation of many products that, due to their initial dispersion form, can be modified, e.g. by adding fillers such as biodegradable films that affect the rheological properties of the dispersion [1]. The carboxymethyl derivative of starch was synthesized for the first time in 1924. The carboxymethylation reaction has become one of the most important starch modifications used in the industry on a large scale. Carboxymethyl starch (CMS) is characterized by a good solubility in cold water and higher resistance to bacteria than unmodified starch [7–9]. The carboxymethyl starch is obtained by the reaction of carboxymethylation (etherification) of the alkaline starch consisting in the introduction of the substituents into the structure of the starch, by reaction with monochloroacetic acid sodium salt. This process is called Williamson’s synthesis and CMS with different degree of substitution can be obtained by means of the mentioned process [10, 11]. The degree of substitution of carboxymethyl starch has a significant influence on its rheological properties, water dispersion of CMS with DS = 0.87 showed five times higher viscosity than CMS with lower value of this parameter, i.e. 0.15. Water dispersions with an increase in the montmorillonite content showed a high viscosity increase (about twice the increase in viscosity with the addition of 3% by weight). In both cases, aqueous dispersions stored above one month may be subject to the environmental degradation. In addition, in cases of compositions containing MMT, a rapid drop in viscosity due to the montmorillonite sedimentation is observed [17]. Rheological research of water carboxymethyl starch dispersions has great importance for science and for the subsequent application possibilities of products obtained on their basis. The effect of fillers on viscosity, and thus on the possibility of mixing them with aqueous CMS dispersions, affects, for example, the production of biodegradable films based on CMS with MMT, where the film is obtained from an aqueous dispersion of CMS with MMT with the addition of glycerine and citric acid [22]. Moreover, water dispersion of carboxymethyl starch with the addition of montmorillonite can be used as an additive to drilling fluids, electro-reed liquids or foundry adhesives [17].
Źródło:
Wiadomości Chemiczne; 2018, 72, 11-12; 829-839
0043-5104
2300-0295
Pojawia się w:
Wiadomości Chemiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wodna dyspersja bezpostaciowej krzemionki jako dodatek poprawiający parametry technologiczne zaczynu cementowego
Aqueous dispersion of amorphous silica, as an additive improving the technological parameters of cement slurry
Autorzy:
Kremieniewski, M.
Rzepka, M.
Powiązania:
https://bibliotekanauki.pl/articles/1835297.pdf
Data publikacji:
2017
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
wodna dyspersja bezpostaciowej krzemionki
krzemionka
szkło wodne sodowe
parametry technologiczne zaczynu cementowego
sedymentacja
stabilność sedymentacyjna
water dispersion of amorphous silica
silica
water glass soda
technological parameters of cement slurry
sedimentation
sedimentation stability
Opis:
W celu uzyskania wymaganych parametrów technologicznych zarówno świeżego (płynnego), jak i stwardniałego zaczynu cementowego projektowane receptury poddawane są ciągłym modyfikacjom. Obecne w składzie zaczynu dodatki i domieszki wywierają wpływ na jego poszczególne właściwości, jednak zdarza się, że poprawa jednego parametru skutkować może jednocześnie pogorszeniem innego. Należy tak dobierać stosowane środki, aby w miarę możliwości uzyskać wymagane wartości konkretnych parametrów przy jednoczesnym zachowaniu na stałym (niezmiennym) poziomie pozostałych cech technologicznych zaczynu cementowego. Zdarza się, iż w trakcie prowadzenia prac badawczych uzyskuje się wyniki, które pozwalają stwierdzić, że stosowany dodatek powoduje poprawę wielu parametrów technologicznych zaczynu cementowego, co zostało omówione w niniejszym artykule. W trakcie realizacji prac badawczych wykazano korzystny wpływ dodatku wodnej dyspersji bezpostaciowej krzemionki na parametry świeżego i stwardniałego zaczynu cementowego i zastosowano dodatek szkła wodnego sodowego CB75 w określonej ilości w stosunku do ilości wody zarobowej. W celu potwierdzenia poprawy badanych parametrów technologicznych sporządzono kontrolne receptury zaczynów. Określone zostały takie własności zaczynu jak: parametry reologiczne, filtracja, czas gęstnienia, odstój wody, stabilność sedymentacyjna. Dla próbek stwardniałych zaczynów ustalono wpływ dodatku CB75 na parametry mechaniczne (wytrzymałość na ściskanie), parametry fizykomechaniczne (przyczepność do rur stalowych i przyczepność do formacji skalnej). Ponadto stwardniały zaczyn cementowy poddano analizom opisującym mikrostrukturę próbki i wykonano badania porowatości oraz przepuszczalności. W celu potwierdzenia poprawy parametrów świeżego i stwardniałego zaczynu badania przeprowadzone zostały dla receptur przeznaczonych do uszczelniania otworów w warunkach otworowych w temperaturze od 30°C do 90°C oraz przy ciśnieniu od 5 MPa do 35 MPa.
In order to obtain the required technological parameters of both fresh (liquid) and hardened cement slurry, the designed recipes are subjected to constant modifications. The additives and admixtures present in the cement slurries formulas affect the various parameters of cement slurry, however, it may happen that the improvement of a given parameter can result in the deterioration of another parameter. The additives should be selected so that, where possible, the required values of the specific parameters will be achieved while maintaining at the constant (unchanging) level the other technological characteristics of the cement slurry. It is sometimes the case that during the implementation of the research, obtained results show that the additive used improves many of the technological parameters of the cement slurry, as discussed in this article. During the research work, the beneficial effects of the addition of an aqueous dispersion of amorphous silica on the parameters of fresh and set cement slurry have been shown. The CB75 water glass was added in a specific quantity in relation to the amount of water used. In order to confirm the improvement of the tested technological parameters, base cement slurries were prepared. The properties of the cement slurry such as: theological parameters, fluid loss, thickening time, free water and sedimentation stability were determined. For samples of hardened cement slurry, the effect of the CB75 addition on the mechanical parameters (compressive strength), physico-mechaical parameters (adhesion to steel pipes and adhesion to rock formation) were determined. In addition, the set cement slurry was subjected to microstructure analysis and porosity and permeability tests were also performed. In order to confirm the improvement of the parameters of fresh and hardened cement slurry, tests were conducted for cement slurries designed to seal wells under hole conditions of 30°C to 90°C and pressure from 5 MPa to 35 MPa.
Źródło:
Nafta-Gaz; 2017, 73, 10; 750-759
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Water-based poly(urethane-urea) dispersions —meeting the European Union legislation
Dyspersje wodne poli(uretanowo-mocznikowe) w świetle wymagań prawodawstwa Unii Europejskiej
Autorzy:
Fernandes, I. P.
Costa, M. R.
Ferreira, M. J.
Barreiro, M. F.
Powiązania:
https://bibliotekanauki.pl/articles/947121.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Chemii Przemysłowej
Tematy:
poly(urethane-urea)
water-based dispersion
European Union legislation
N-methyl-pyrrolidone free products
poli(uretano-mocznik)
dyspersja wodna
prawodawstwo Unii Europejskiej
produkty wolne od N-metylo-pirolidonu
Opis:
This article discusses the synthesis methods of water-based poly(urethane-urea) dispersions (PUD), which over the past few decades have developed a solid reputation for high performance applications, particularly in the field of adhesives and coatings. PUDs are mostly environmentally compatible products since they do not contain or contain only low amounts of volatile organic compounds (VOC). This is an important feature in view of the present environmental policies, where governments and internal agencies are placing emphasis on developing sustainable processes, improving work conditions and reducing emissions of toxic and polluting substances into the atmosphere. In this context, this paper will discuss the main approaches applied to PUD synthesis in order to meet severe environmental restrictions resulting from the EU legislation.
Omówiono metody syntezy dyspersji wodnych poli(uretanowo-mocznikowych) (PUD), które znajdują coraz szersze zastosowanie, szczególnie w produkcji klejów i powłok. PUD są na ogół produktami bezpiecznymi dla środowiska, ze względu na brak lub małą zawartość lotnych związków organicznych (VOC), co jest ważne w świetle obecnej polityki ochrony środowiska. Przedstawione w pracy metody syntezy PUD uwzględniają wymagania wynikające z prawodawstwa Unii Europejskiej w zakresie spełniania surowych ograniczeń środowiskowych.
Źródło:
Polimery; 2015, 60, 9; 536-540
0032-2725
Pojawia się w:
Polimery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical dispersion of clay from soil into water: readily-dispersed and spontaneously-dispersed clay
Autorzy:
Czyz, E.A.
Dexter, A.R.
Powiązania:
https://bibliotekanauki.pl/articles/24323.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
mechanical dispersion
clay
soil
water
readily-dispersed clay spontaneously-dispersed clay
Opis:
A method for the experimental determination of the amount of clay dispersed from soil into water is described. The method was evaluated using soil samples from agricultural fields in 18 locations in Poland. Soil particle size distributions, contents of organic matter and exchangeable cations were measured by standard methods. Sub-samples were placed in distilled water and were subjected to four different energy inputs obtained by different numbers of inversions (end-over-end movements). The amounts of clay that dispersed into suspension were measured by light scattering (turbidimetry). An empirical equation was developed that provided an approximate fit to the experimental data for turbidity as a function of number of inversions. It is suggested that extrapolation of the fitted equation to zero inversions enables the amount of spontaneously-dispersed clay to be estimated. This method introduces the possibility of replacing the existing subjective, qualitative method of determining spontaneously-dispersed clay with a quantitative, objective method. Even though the disper-sed clay is measured under saturated conditions, soil samples retaina ‘memory’ of the water contents at which they have been stored.
Źródło:
International Agrophysics; 2015, 29, 1
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Functionalization of Gold Nanoparticles for the Detection of Heavy Metals in Contaminated Water Samples in the Province of Tayacaja
Autorzy:
Carbajal-Morán, Hipólito
Rivera-Esteban, Jesús M.
Aldama-Reyna, Claver W.
Mejía-Uriarte, Elsi V.
Powiązania:
https://bibliotekanauki.pl/articles/2173367.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
functionalisation
metallic colloid
AuNps-Cys
pulsed laser
water
heavy metals
sonication dispersion
Opis:
The work consisted in functionalizing gold nanoparticles to analytically detect heavy metals in contaminated water; in Tayacaja-Huancavelica-Peru, using physical method of laser ablation. The 450 mJ/p Nd:YAG was used as a pulsed laser generator for the production of colloids from AuNPs by the top-down approach; the target was a 1 cm x 1.5 cm high purity gold metallic plate with a thickness of 1 mm, inside a 20 ml cuvette of deionized water, containing 5 ml of L-Cysteine ≥ 75% purity. Nanoparticle colloids were characterized by UV-Vis spectroscopy from 200 to 1160 nm range. Using a convex lens, the gold metal plate was ablated by the laser equipment, located 10 cm from the focus; with λ = 1064 nm and λ = 532 nm with energy equivalent to 60.28 mJ/p and 32.99 mJ/p respectively, with a ratio of 2 Hz, for 30 and 60 min. All the samples produced were subjected to the dispersion process by sonication at 40 KHz for one hour. The functionalized nanoparticles presented a resonance displacement of the maximum wavelength peak with respect to the reference at approximately 22.51 nm; consequently, the increase in diameter occurred at 52.10 nm. The sensitive capacity of the functionalized nanoparticles was verified for different concentrations of analytes in water, made up of divalent heavy metal ions Cd2+, Pb2+, and trivalent nonmetal As3+. At a concentration greater than 500 uM, the color of the functionalized nanoparticles turned bluish, due to the presence of positive ions. Therefore, it was stated that the functionalized nanoparticles enable the detection of heavy metals in water by color variation.
Źródło:
Journal of Ecological Engineering; 2022, 23, 9; 88--99
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identification of transport parameters of chlorides in different soils on the basis of column studies
Autorzy:
Pietrzak, Damian
Kania, Jarosław
Kmiecik, Ewa
Wątor, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/94612.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet im. Adama Mickiewicza w Poznaniu
Tematy:
pore-water velocity
dispersion coefficient
dispersivity constant
CXTFIT
STANMOD
współczynnik dyspersji
stała dyspersyjności
Opis:
Knowledge of transport patterns of chemicals in groundwater is essential for environmental assessment of their potential impact. In the present study, the mobility of a chloride tracer injected into three different soils was investigated, using column experiments. The column tests were performed under steady-state conditions to determine parameters of chloride migration through soils. Based on breakthrough curves, pore-water velocity, dispersion coefficient and dispersivity constant were calculated for each soil sample using CXTFIT/STANMOD software. Pore-water velocity was in the range of 0.31 cm/min for fine sand, to 0.35 cm/min for silty sand and to 0.40 cm/min for vari-grained sand. The highest values of dispersion coefficient and dispersivity constant were observed for silty sand (0.55 cm2/min and 1.55 cm, respectively), while the lowest value was found for fine sand (0.059 cm2/min and 0.19 cm, respectively). Column experiments for chlorides (conservative tracer) are a preliminary stage for further research which will be undertaken to investigate migration parameters of selected neonicotinoids (reactive tracers) through different soils.
Źródło:
Geologos; 2019, 25, 3; 225-229
1426-8981
2080-6574
Pojawia się w:
Geologos
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The basics of oily water dispersion measurements
Podstawy pomiarów dyspersji w wodach zaolejonych
Autorzy:
Treichel, P.
Wiewióra, A.
Powiązania:
https://bibliotekanauki.pl/articles/258310.pdf
Data publikacji:
2007
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
mieszanka wodno-olejowa
dyspersja
wymiarowanie cząstek
średnica zastępcza
water-oil mixture
dispersion
particles sizing
equivalent diameters
Opis:
This paper presents the general features of oily water formation on vessels. Example quantities of the daily inflow of wastewater are given and the possible composites of the oil-water mixture are characterized. The problem of defining particle dispersion is illustrated. Major parameters applied to define particle dispersion are shown. The possible applications of this research for the description of ship water-oil mixtures are analyzed.
W artykule przedstawiono ogólną charakterystykę wód zaolejonych powstających na statkach. Zaprezentowano problematykę opisu stopnia dyspersji cząstek. Przedstawiono ważniejsze wielkości wykorzystywane do opisu dyspersji cząstek. Poddano analizie zasadność ich wykorzystania do opisu mieszanin wodno-olejowych pochodzących ze statków.
Źródło:
Problemy Eksploatacji; 2007, 3; 215-222
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
RESEARCH OPERATIONAL SAFETY OF PROCESS EQUIPMENT AT LOSS OF CALCIUM CARBONATE
BEZPIECZEŃSTWO UŻYTKOWANIA APARATURY BADAWCZEJ W ZAKRESIE TECHNOLOGICZNEJ UTRATY WĘGLANU WAPNIA
ДОСЛІДЖЕННЯ БЕЗПЕКИ ЕКСПЛУАТАЦІЇ ТЕХНОЛОГІЧНОГО ОБЛАДНАННЯ ПРИ ВИПАДАННІ КАРБОНАТУ КАЛЬЦІЮ
Autorzy:
Zoshchuk, Vitalii
Orlova, Alla
Martynov, Sergey
Powiązania:
https://bibliotekanauki.pl/articles/576962.pdf
Data publikacji:
2017
Wydawca:
Międzynarodowy Instytut Innowacji Nauka – Edukacja – Rozwój w Warszawie
Tematy:
water heating equipment, magnetic field, dispersion of sediment, the physico-chemical properties of water
Sprzęt do ogrzewania wody, pole magnetyczne, dyspersja osadu, właściwości fizyko-chemiczne wody
водонагревательное оборудование, магнитное поле, дисперсность осадка, физико-химические свойства воды
Opis:
W artykule opisano bezpieczeństwo użytkowania aparatury badawczej i sposób działania urządzeń ogrzewania wody, który wymaga przestrzegania określonego reżimu wodnego. Autor skupia się na konsekwencjach korzystania z urządzeń do ogrzewania wody oraz zasadach bezpiecznej pracy i procesu technologicznego utraty węglanu wapnia. Scharakteryzowano wyniki fizycznej i chemicznej analizy wody artezyjskiej.
The article describes the process of operation of water heating equipment, associated with water, which requires compliance with certain water regime. It is focused on the consequences and their elimination when using water heating equipment, and safe operation. The results of physical and chemical analyses of artesian water have been ordered.
В статье рассмотрен процесс эксплуатации водонагревательного оборудования связанного с водой, которое требует соблюдения определенного водного режима. Акцентируется внимание на последствиях и их устранении при использовании водогрейного устройства и безопасной эксплуатации. Приведены результаты физико-химических анализов артезианской воды.
Źródło:
International Journal of New Economics and Social Sciences; 2017, 5(1); 198-205
2450-2146
2451-1064
Pojawia się w:
International Journal of New Economics and Social Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vliania konstruktivnyh elementov ustrojstv na dispersnost kapel vody dla osaždeniâ produktov gorenia i sniżenia temperatury v obemah pomescenij vo vrema pożara
Investigation of the influence of structural elements devices on dispersed water droplets to precipitate the product of combustion and reduce the tempeature in the volume of the room during a firer
Wpływ elementów konstrukcyjnych urządzeń do wytwarzania rozproszonych strumieni wody na zmniejszenie produktów spalania i redukcje temperatury podczas pożaru
Autorzy:
Luŝ, V.
Loik, V.
Štangret, N.
Matuškevič, R.
Powiązania:
https://bibliotekanauki.pl/articles/136452.pdf
Data publikacji:
2017
Wydawca:
Szkoła Główna Służby Pożarniczej
Tematy:
hazardous fire factors
smoke and combustion products
temperature decrease
combustion products precipitation
water droplet dispersion
visibility increase
classification of water spraying methods
pneumo-hydraulic spraying
centrifugal nozzles
equivalent droplet diameter
produkty spalania
spadek temperatury
redukcja produktów spalania
dyspersja kropel wody
zwiększenie widoczności
klasyfikacja metod rozpylenia wody
rozpylanie pneumo-hydrauliczne
dysze odśrodkowe
równoważna średnica kropelek
Opis:
В статье рассмотрены устройства для осаждения продуктов горения, снижение температуры в объеме помещения и увеличение видимости. Основное внимание уделялось выбору способа распыления воды на мелкодисперсные частицы, влияния скорости потока воздуха на дисперсность капель, которые выходят из центробежной форсунки. Целью исследования является развитие метода расчета одного из главных параметров модели – эквивалентного диаметра капель струи распыленной воды. Ранее определение этого параметра было возможно лишь с помощью сложных экспериментальных измерений. В данной работе для его расчета применены ранее опубликованные литературные данные. Формула, полученная в работе, позволяет выполнять расчет эквивалентного диаметра капель на основе конструктивных параметров. Графические зависимости, полученные с помощью формулы, позволили определить зависимость эквивалентного диаметра капель от технических параметров. Применение формулы к математической модели теплозащиты позволило расширить ее возможности для практического применения. Также предлагается методика расчёта теплопоглощения порции воды в зависимости от диаметра монодиспергированых водяных капель и влияние дисперсности на интенсивность подачи воды для обеспечения тушения очага пожара.
In the article, are considered devices for depositing combustion products, reducing the temperature in the room volume and increasing visibility. The main attention was paid to the choice of the method for atomizing water into fine particles, the effect of air flow velocity on the dispersion of droplets that leave the centrifugal nozzle. The purpose of the study is to develop a method for calculating one of the main parameters of the model – the equivalent diameter of the droplets of a spray of water. Earlier, the definition of this parameter was possible only with the help of complex experimental measurements. In this paper, previously published literature data are used to calculate it. The formula obtained in the work makes it possible to calculate the equivalent droplet diameter on the basis of design parameters. Graphic dependencies obtained with the help of the formula made it possible to determine the dependence of the equivalent droplet diameter on technical parameters. Application of the formula to the mathematical model of heat protection has allowed expanding its possibilities for practical application. Also, a method is proposed for calculating the heat absorption of a portion of water as a function of the diameter of monodispersed water droplets and the effect of dispersion on the intensity of the water supply in order to extinguish the fire.
W artykule opisano wpływ dysz wodnych na redukcje produktów spalania, obniżenie temperatury w pomieszczeniu, a także poprawę widoczność w pożarze. Główną uwagę zwrócono na wybór metody rozpylania wody na drobne cząstki oraz wpływ prędkości przepływu powietrza na dyspersję kropel powstających w dyszach. Celem badania było opracowanie metody obliczania jednego z głównych parametrów modelu – równoważnej średnicy kropel rozpylanej wody. Dotychczas definicja tego parametru była możliwa do określenia tylko przy pomocy złożonych pomiarów doświadczalnych. W niniejszym artykule do określenia pożądanego parametru wykorzystano dane literaturowe. Wzór uzyskany w pracy pozwala obliczyć równoważną średnicę kropel na podstawie parametrów projektowych. Krzywe uzyskane przy pomocy wzoru określają zależność średnicy kropel względem parametrów technicznych urządzeń. W artykule proponuje się ponadto metodę obliczania absorpcji ciepła w zależności od średnicy kropel oraz wpływu dyspersji na intensywność podawania wody w trakcie pożaru.
Źródło:
Zeszyty Naukowe SGSP / Szkoła Główna Służby Pożarniczej; 2017, 4, 64; 125-149
0239-5223
Pojawia się w:
Zeszyty Naukowe SGSP / Szkoła Główna Służby Pożarniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Pierwotny zasięg występowania najstarszej soli kamiennej (Na1) w południowej części monokliny przedsudeckiej (SW Polska)
The original extent of the Oldest Halite (Na1) in the southern part of the Fore-Sudetic Monocline (SW Poland)
Autorzy:
Markiewicz, A.
Becker, R.
Powiązania:
https://bibliotekanauki.pl/articles/183859.pdf
Data publikacji:
2009
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
najstarsza sól kamienna
monoklina przedsudecka
badania hydrochemiczne
solna aureola rozproszenia
Oldest Halite
Fore Sudetic Monocline
water chemistry
salt dispersion aureole
Opis:
Obecnie udokumentowany, południowy zasięg najstarszej soli kamiennej (Na1) w SW części Polski przebiega "równoleżnikowo", generalnie wzdłuż linii pomiędzy Kożuchowem i Ostrzeszowem. Wyniki badań hydrochemicznych i petrograficzno-mineralogicznych wskazują m.in., że w bezsolnej strefie monokliny przedsudeckiej, tj. na południe od ww. granicy występowania soli Na1 doszło do "młodej" impregnacji anhydrytu dolnego i wapienia cechsztyńskiego solą kamienną - powstania tzw. solnej aureoli rozproszenia. Ponadto horyzont brekcji BrA1 stwierdzany na S od granicy występowania soli Na1 jest związany z tektonicznym kontaktowaniem anhydrytów górnych i dolnych. Do powstania tych zjawisk doszło głównie w trakcie deformacji śródławicowych, wyciskania i rozpuszczenia soli w okresie laramijskich ruchów tektonicznych. Powyższe obserwacje skłaniają do stwierdzenia, że najstarsza sól kamienna (Na1) pierwotnie występowała również w pozostałej, południowo-zachodniej części monokliny przedsudeckiej.
The recently documented southern limit of the Oldest Halite (Na1) unit in SW Poland runs "longitudinally", generally along the line between Kożuchów and Ostrzeszów. The results of hydrochemical analyses and petrographic-mineralogical investigations indicate that there was a process of "young" impregnation of the Lower Anhydrite (A1d) and Zechstein Limestone (Ca1) with halite. The process led to the formation of the so-called dispersion salt aureole within the salt-free zone of the Fore-Sudetic Monocline. Moreover, the breccia horizon BrA1, observed to the south of the Na1 unit limit, is associated with a contact of the Upper (A1g) and Lower (A1d) Anhydrites (so-called a tectonic weld). These phenomena developed mainly during the processes of intrastratal deformation, upward squeezing and dissolution of salts at time of Laramide tectonic movements. The above considerations imply that the Na1 salt unit occurred originally also in the southern-western part of the Fore-Sudetic Monocline.
Źródło:
Geologia / Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie; 2009, 35, 3; 327-348
0138-0974
Pojawia się w:
Geologia / Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-10 z 10

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies