Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "water channel" wg kryterium: Temat


Tytuł:
Performance of the Direct Sequence Spread Spectrum Underwater Acoustic Communication System with Differential Detection in Strong Multipath Propagation Conditions
Autorzy:
Schmidt, Jan H.
Kochańska, Iwona
Schmidt, Aleksander M.
Powiązania:
https://bibliotekanauki.pl/articles/31339747.pdf
Data publikacji:
2024
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
direct sequence spread spectrum
DSSS
m-sequences
Kasami codes
shallow-water channel
multipath propagation
underwater acoustic communications
UAC
Opis:
The underwater acoustic communication (UAC) operating in very shallow-water should ensure reliable transmission in conditions of strong multipath propagation, significantly disturbing the received signal. One of the techniques to achieve this goal is the direct sequence spread spectrum (DSSS) technique, which consists in binary phase shift keying (BPSK) according to a pseudo-random spreading sequence. This paper describes the DSSS data transmission tests in the simulation and experimental environment, using different types of pseudo-noise sequences: m-sequences and Kasami codes of the order 6 and 8. The transmitted signals are of different bandwidth and the detection at the receiver side was performed using two detection methods: non-differential and differential. The performed experiments allowed to draw important conclusions for the designing of a physical layer of the shallow-water UAC system. Both, m-sequences and Kasami codes allow to achieve a similar bit error rate, which at best was less than 10−3. At the same time, the 6th order sequences are not long enough to achieve an acceptable BER under strong multipath conditions. In the case of transmission of wideband signals the differential detection algorithm allows to achieve a significantly better BER (less than 10−2) than nondifferential one (BER not less than 10−1). In the case of narrowband signals the simulation tests have shown that the non-differential algorithm gives a better BER, but experimental tests under conditions of strong multipath propagation did not confirm it. The differential algorithm allowed to achieve a BER less than 10−2 in experimental tests, while the second algorithm allowed to obtain, at best, a BER less than 10−1. In addition, two indicators have been proposed for a rough assessment which of the detection algorithms under current propagation conditions in the channel will allow to obtain a better BER.
Źródło:
Archives of Acoustics; 2024, 49, 1; 129-140
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Formation of the Surface Runoff of the Rivers of the Carpathian Region during the Urbanization of Slope Areas
Autorzy:
Hnativ, Roman
Yakhno, Oleh
Hnativ, Ihor
Powiązania:
https://bibliotekanauki.pl/articles/24201783.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
anthropogenic load
water object
pollution of riverbed
erosion process
bottom sediment
ecological indicator
channel process
Opis:
Anthropogenic factors cause an increase in the impact on the natural system as a whole and its components. An increase in the intensity of this influence is predicted in the 21st century, and its forms are very diverse and unevenly distributed across the globe. This is most noticeable in industrialized countries, but at the same time this influence largely depends not only on the industrial potential and the level of technology, but also on the population density and urbanization of territories. Currently, much attention is being paid to the ecological problems of river catchments, which are significantly transformed as a result of technogenic influence on the natural environment. Surface runoff of water and sediments is usually formed in the river basin as slope runoff entering the river network. The river basin regulates the surface runoff formed as a result of atmospheric precipitation, which discretely falls on its surface, transferring a significant part of it into the underground runoff. The state of forest landscapes plays an important role in the formation of floods in the Dniester basin. The forest performs important ecological functions, including water protection and soil protection. Forests stabilize soils, preventing their erosion. The presence of a sufficient area of forests contributes to the regulation of surface runoff and the hydrological regime, the prevention of soil erosion and the stabilization of riverbeds. The use of water and mineral resources, construction on the banks of rivers and the laying of engineering communications through them are always different forms of artificial influence on the natural course of channel processes, which change it to varying degrees. Measures that change the channel-forming activity of the river, disrupt the flow of sediments, or radically change the hydraulic characteristics and structure of the flow have a particularly negative impact. The generalization of the dynamics of the channel process and ecological indicators within the territories of the Carpathian region will allow us to assess their impact on the state of the river network, the change in the quality of natural waters, and predict floods.
Źródło:
Journal of Ecological Engineering; 2023, 24, 5; 249--255
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spuścizny dziewięciowiekowej antropopresji w zlewni Skawy
Legacies of nine centuries of anthropopressure in the Skawa catchment
Autorzy:
Witkowski, Karol
Powiązania:
https://bibliotekanauki.pl/articles/37507190.pdf
Data publikacji:
2023
Wydawca:
Wadowickie Centrum Kultury im. Marcina Wadowity
Tematy:
fluvial anthropospheres
channel patterns
channelization
water milling
self-restoration
antroposfery rzeczne
kanalizacja
młynarstwo wodne
spław drewna
komunikacja
Opis:
The fluvial anthropospheres cover the river and its floodplains. They arise due to modifying or replacing natural processes with human-dominated ones. Fluvial anthropospheres are the legacy of past human activity. The article determines the beginning of the formation of fluvial anthropospheres in the Skawa catchment and the conditions of its functioning. The effects of anthropopressure were researched using a comparative analysis of maps from the 19th – 21st centuries. The impact on the natural environment was assessed on the basis of written sources and literature. Indirect causes of interference with the environment have changed over time, ranging from milling and rafting to water retention for municipal purposes. On the other hand, the immediate causes resulted from socio-economic and political changes. Technological progress and demographic development were responsible for the development of the milling industry. Periods of stagnation or regression have been caused by natural disasters and wars. Navigation development plans were part of the Habsburg imperial policy. The pro-industrial policy of the 1980s dictated the construction of the retention reservoir. Therefore, the directions of development of the fluvial anthropospheres can be treated as a result of national and international politics.
Antroposfery rzeczne pokrywają rzekę i jej równiny zalewowe. Powstają w wyniku modyfikacji lub zastąpienia procesów naturalnych procesami zdominowanymi przez człowieka. Antroposfery rzeczne są dziedzictwem dawnej działalności człowieka. W artykule określono początek powstawania antroposfer rzecznych w zlewni Skawy oraz warunki jej funkcjonowania. Skutki antropopresji zbadano za pomocą analizy porównawczej map z XIX – XXI w. Ocenę oddziaływania na środowisko naturalne przeprowadzono na podstawie źródeł pisanych i literatury. Pośrednie przyczyny ingerencji w środowisko zmieniały się z biegiem czasu, począwszy od młynarstwa i spławiania drewna, po retencję wody na cele komunalne. Z drugiej strony, bezpośrednie przyczyny wynikały ze zmian społeczno-gospodarczych i politycznych. Postęp technologiczny i rozwój demograficzny przyczyniły się do rozwoju przemysłu młynarskiego. Okresy stagnacji lub regresu spowodowane były klęskami żywiołowymi i wojnami. Plany rozwoju żeglugi były częścią polityki imperialnej Habsburgów. Proindustrialna polityka lat 80. XX w. podyktowała budowę zbiornika retencyjnego. Dlatego też kierunki rozwoju antroposfer rzecznych można traktować jako wynik polityki krajowej i międzynarodowej.
Źródło:
Wadoviana. Przegląd historyczno-kulturalny; 2023, 26; 169-184
1505-0181
Pojawia się w:
Wadoviana. Przegląd historyczno-kulturalny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of Channel Processes and the Need to Forecast Deformations of the Stryi Riverbed
Autorzy:
Hnativ, Ihor
Balkovskyi, Volodymyr
Cherniuk, Volodymyr
Panas, Natalia
Korinec, Yuri
Yakhno, Oleh
Hnativ, Roman
Powiązania:
https://bibliotekanauki.pl/articles/2086425.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
mountain river
surface water
channel processes
shore protection
riverbed deformation
denudation processes
Opis:
Deformations of the channel are a consequence of the development of denudation processes in the basin area, increase in the volume of solid runoff and deposition of debris of the rock, its fractional redistribution in the channels, which especially increase during floods and flooding. They cause changes in the hydrological regime and structure of the river system, the destruction of residential and commercial buildings, as well as the infrastructure in the floodplain. Trends, magnitudes and intensity of deformations of riverbeds are formed by a complex of natural and man-made factors. Neglecting the planned and high-altitude displacements of riverbeds often leads to unpredictable consequences. Washing the shore can cause a gas or oil pipeline to rupture, leading to a strong explosion and fire, as well as oil pollution and environmental damage. Channel processes are associated with the washing of bridge piers, power lines, significant material losses and even human casualties during floods and flooding. The aim of the work is to analyze the development of channel processes in the basin of the river Stryi and forecast the deformation of its channel. The results of the analysis show that the riverbeds of Prykarpattia are very unstable and are characterized by intense erosion of the banks and bottom, which is caused by the influence of various factors. It is a man-made activity that includes the development of gravel quarries in floodplains and riverbeds and their straightening, runoff regulation, changes in forestry and land use. Natural factors, such as climate change and water runoff, etc., are also affected. It was found that the bed of the river Stryi does not have a stable shape, significantly changed the configuration, significantly reduced multi-sleeved and increased its straightness, and in some places the river changed its position by 60–80 meters. Restoration works carried out in some parts of the riverbed during this period were not effective enough. Water in different parts of the riverbed washes the shores, which causes dangerous landslides that occur directly near the riverbed. In these areas, it is necessary to more effectively carry out measures to regulate runoff and restore shore protection.
Źródło:
Journal of Ecological Engineering; 2022, 23, 5; 187--195
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The combined approach to solving issues of the flood hazard assessment using water gauge records and spatial data
Lączone podejście do rozwiązywania zagadnień oceny zagrożeń powodziowych z wykorzystaniem danych wodowskazowych i danych przestrzennych
Autorzy:
Korbutiak, V.
Stefanyshyn, D.
Lahodniuk, O.
Lahodniuk, A.
Powiązania:
https://bibliotekanauki.pl/articles/2083854.pdf
Data publikacji:
2020
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
water discharges
channel transformations
anthropogenic impact
hydrological data
Opis:
The research deals with the combined approach to boost the reliability of hydrological estimates based on a series of observations being supported by spatial data. In particular, the application of various theoretical curves of probability distribution or situations that may occur at submountain sections of rivers (for example, alluvium accumulation or river bed erosion) is considered. Because of the obsolete cadastral data on the riverbeds and catchments, the necessity of the use of remote sensing is substantiated. Assessment of the dynamics of changes in the river cross-section profiles allows making conclusions concerning the direction of the channel deformations – deepening and straitening the river channels or increasing their cross dimensions. This information may complement the assessment of flood protection of the territories.
Źródło:
Acta Scientiarum Polonorum. Architectura; 2020, 19, 1; 111-118
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristics of carbon dioxideand product water exhausts in a directmethanol fuel cell with serpentine channels
Autorzy:
Nakashima, Kohei
Powiązania:
https://bibliotekanauki.pl/articles/246103.pdf
Data publikacji:
2019
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
direct methanol fuel cell
bubble
carbon dioxide
slug of carbon dioxide
product water
transparent cell
serpentine channel
Opis:
This study utilized a transparent direct methanol fuel cell, with serpentine channels with a width of 2 mm and an initial depth of 2 mm, and investigated the relationship between the behaviours of carbon dioxide (CO2) slugs, product water accumulations, and voltage fluctuation. It examined the exhaust volumes of CO2 slugs and product water accumulations from the channels over time, comparing an anode channel with a depth of 1.2 mm to one with a depth of 2 mm (without changing the cathode depth of 2 mm, nor the width of 2 mm in both the anode and the cathode). Results indicated that cell voltage fluctuated, rising while CO2 slugs were ejected, and falling between ejections. In the case of an anode channel depth of 2 mm and a lower methanol-water solution flow rate, CO2 slugs were ejected less frequently, so cell voltage fluctuated widely. (Product water accumulations in the cathode had a minimum effect on this cell voltage fluctuation.) In the case of a higher methanol-water solution flow rate, CO2 slugs were ejected more frequently, with less exhaust volume per CO2 slug, reducing the fluctuation in cell voltage. Finally, with an anode channel depth of 1.2 mm, the exhaust volume per CO2 slug became even smaller, and these small CO2 slugs were rapidly ejected. With this shallow depth, the cell voltage increased with a lower methanol-water solution flow rate, but decreased with a higher methanol-water solution flow rate by crossover.
Źródło:
Journal of KONES; 2019, 26, 3; 137-144
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Enhance the Capacity of MIMO Wireless Communication Channel using SVD and Optimal Power Allocation Algorithm
Autorzy:
Kumar, Neeraj
Kaur, Dalveer
Powiązania:
https://bibliotekanauki.pl/articles/226875.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
MIMO
water filling algorithm
singular value decomposition
channel state information
channel capacity
Opis:
Multiple input multiple output (MIMO) is a multiple antenna technology used extensively in wireless communication systems. With the ever increasing demand in high data rates, MIMO system is the necessity of wireless communication. In MIMO wireless communication system, where the multiple antennas are placed on base station and mobile station, the major problem is the constant power of base station, which has to be allocated to data streams optimally. This problem is referred as a power allocation problem. In this research, singular value decomposition (SVD) is used to decouple the MIMO system in the presence of channel state information (CSI) at the base station and forms parallel channels between base station and mobile station. This practice parallel channel ensures the simultaneous transmission of parallel data streams between base station and mobile station. Along with this, water filling algorithm is used in this research to allocate power to each data stream optimally. Further the relationship between the channel capacity of MIMO wireless system and the number of antennas at the base station and the mobile station is derived mathematically. The performance comparison of channel capacity for MIMO systems, both in the presence and absence of CSI is done. Finally, the effect of channel correlation because of antennas at the base stations and the mobile stations in the MIMO systems is also measured.
Źródło:
International Journal of Electronics and Telecommunications; 2019, 65, 1; 71-78
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dredging Volumes Prediction for the Access Channel of Santos Port Considering Different Design Depths
Autorzy:
Pion, L.M.
Bernardino, J.C.M
Powiązania:
https://bibliotekanauki.pl/articles/116091.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
Port of Santos
dredging
water level
dredging volumes prediction
Chart Datum (CD)
water level modeling
access channel
prediction method
Opis:
Santos is the most important Brazilian port, handling about 114 million of tons in 2016. In 2010, there was a great capital dredging in order to deepen the Access Channel to 15m deep (Chart Datum - CD). This depth was not achieved, due to inefficiency on dredging procedures. As deepening and maintaining design depths are indispensable, this study presents an analysis of sediment deposition in Santos Port Access Channel and an annual dredging volumes prediction, considering current bathymetric survey and design depths of 15, 16 and 17 m (CD).A numerical hydrodynamic and morphological model was developed for the interest area, by using Delft3D®, calibrated with waves, currents and water level data measured within Santos Port adjacen-cies. Sediment transport model was calibrated with suspended sediment data and historic series of dredged volumes from Santos Port Access Channel. Two different scenarios were simulated for each design depth, according to the regional environmental characteristics. For current bathymetric scenario, the model estimates that it would be necessary to dredge an annual average of about 4,325,000 m³ from Santos Port access chan-nel to maintain current depth condition. Regarding design depths of 15, 16, 17 meters, it would be an in-crease of 15%, 55%, and 80%.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2018, 12, 3; 505-514
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical study of hydrodynamic derivatives and course stability under ship-bank interaction
Autorzy:
Liu, H.
Ma, N.
Gu, X. C.
Powiązania:
https://bibliotekanauki.pl/articles/116925.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
safety at sea
ship-bank interaction
Reynolds-Averaged Navier-Stokes (RANS)
hydrodynamic derivatives
hydrodynamics
Planar Motion Mechanism (PMM)
Circulating Water Channel (CWC)
User Defined Functions (UDF)
Opis:
Since ship-bank interaction affects the manoeuvrability of a ship navigating close to a bank, the determination of hydrodynamic derivatives is of great importance to assess the ship manoeuvrability. To obtain the hydrodynamic derivatives of the KVLCC2 model ship with different water depths and ship-bank distances, the simulation of PMM tests are carried out using an unsteady Reynolds-Averaged Navier–Stokes (RANS) based solver. Hybrid dynamic mesh technique is proposed to realize the simulation of pure yaw tests in confined water. Studies on the grid convergence and time-step-size convergence are firstly performed. Hydrodynamic derivatives for the ship in different water depths and ship-bank distances are compared. The course stability is investigated based on time-domain simulations and eigenvalue analysis, and the results show that the ship-bank interaction and shallow water effect have a remarkable influence on the course stability.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2018, 12, 4; 747-753
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Perspektywy międzysezonowego magazynowania ciepła w płytkich warstwach wodonośnych z obszarów młodoglacjalnych na przykładzie Rynny Słuszewskiej Wysoczyzny Żarnowieckiej
Seasonal thermal energy storage perspectives in a shallow aquifer of young glacial areas on the example of Słuszewska Ice-Marginal valley in the Żarnowiec Morainic Plateau
Autorzy:
Lemoine, G.
Powiązania:
https://bibliotekanauki.pl/articles/203676.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
magazynowanie ciepła
warstwa wodonośna
gruntowe pompy ciepła
obszar młodoglacjalny
Wysoczyzna Żarnowiecka
Rynna Słuszewska
Równina morenowa Toronto
Scarborough
underground energy storage
ground water heat pump
late-glacial area
Żarnowiec Morainic Plateau
Słuszewska marginal channel
Toronto Morainic Plain
Opis:
W artykule omówiono możliwości magazynowania ciepła w warstwie wodonośnej (ang. ATES) położonej na Wysoczyźnie Żarnowieckiej (Pomorze) Rynny Słuszewskiej. Na wstępie zaproponowano krótkie przypomnienie historycznego kontekstu, który uwarunkował powstanie i rozwój systemów ATES w świecie podczas ubiegłego i początku bieżącego wieku. Następnie przedstawiono charakterystykę Wysoczyzny Żarnowieckiej jako obszaru młodoglacjalnego mogącego być przydatnym dla niskotemperaturowych zastosowań magazynowania ciepła w warstwie wodonośnej (ang. LT-ATES). Zauważywszy pewne podobieństwa, pod kątem płytkich warunków hydrogeologicznych, między Wysoczyzną Żarnowiecką a równiną morenową regionu Toronto w Kanadzie, podano przykład zrealizowanego w tym drugim regionie pilotażowego projektu LT-ATES w Canada Center Building w Scarborough, tj. podręcznikowy przykład niepowodzenia inwestycji. Zakładając przydatność Wysoczyzny Żarnowieckiej do zastosowań LT-ATES, oszacowano potencjał termiczny drugiego poziomu wodonośnego występującego w Rynnie Słuszewskiej, która została równocześnie wskazana jako potencjalna lokalizacja pilotażowego projektu.
The mains results of the first evaluation of environmental suitability of an area for seasonal ATES (Aquifer Thermal Energy Storage) development purpose was presented in the article. The site named the Słuszewska Trough is a marginal tunel valley located inside the Żarnowiec Morainic Plateau (Pomeranian region, Poland). Firstly, a briefly historical overview of ATES throughout the world is given concerning the emergence of this technology and its developments from the end of the last century to the begining of the current one. Secondly, the Żarnowiec Morainic Plateau is presented, as a young fluvio-glacial environment typicaly promising for low-temperature Aquifer Thermal Energy Storage (LT-ATES) applications. Thirdly, a comparative approach is proposed between the Żarnowiec Morainic Plateau and Toronto Morainic Plain in Canada, whith special regards to hydrogeological similaritys between these two regions and lessons learned in the second region by pilot project LT-ATES of the Canada Center Building in Scarborough. Finaly, after confirming a promising aspect of the possible localization of a LT-ATES pilot project in the Żarnowiec Morainic Plateau, an assement of thermal storage avalibility of the second aquifer layer was proposed, especially concerning the Słuszewska marginal tunel valley.
Źródło:
Technika Poszukiwań Geologicznych; 2018, R. 57, nr 2, 2; 55-77
0304-520X
Pojawia się w:
Technika Poszukiwań Geologicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the Effect of Channel Parameters between Filaments and Single Fabric Parameters on Air Permeability, Water Vapour Resistance and Thermal Resistance
Analiza wpływu wielkości parametrów kanału międzynitkowego i parametrów tkaniny pojedynczej na przepuszczalność powietrza, opór pary wodnej oraz opór cieplny
Autorzy:
Polipowski, M.
Więcek, P.
Więcek, B.
Pinar, A.
Powiązania:
https://bibliotekanauki.pl/articles/231662.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
air permeability
water vapor flow
thermal resistance
ANOVA
inter-yarn channel parameters
przepuszczalność powietrza
przepływ pary wodnej
opór cieplny
parametry kanału międzynitkowego
Opis:
The work presented is a continuation of research on the interthread channels of single fabric taking into account the parameters of fabric structure. The stereographic method of threedimensional structure analysis of a single fabric, the method of 3D microscopy of fabric fragments in structural light and analysis of microscopic images of the 4th generation were introduced. Statistical analysis of the air permeability, water vapour resistance and thermal resistance indicators for flat textile products showed significant dependences of these flow rates on channel parameters as well as other fabric parameters. The correlation between the parameters measured and the flow indicators was determined. Very strong correlations of the air permeability indicator were found with the channel clearance area, warp count and approximate channel volume. A strong correlation with the thickness of fabrics was obtained for the water vapour resistance indicator. For heat resistance there was a strong correlation with the diameter of channel inlets. Strong correlations between fabric parameters and channel parameters were obtained for the channel clearance area and approximate channel volume, warp and channel ground area, weft count and fabric thickness, channel inlet diameter, and fabric thickness.
Zaprezentowane prace są kontynuacją badań nad kanałami międzynitkowymi tkaniny pojedynczej z uwzględnieniem parametrów struktury tkaniny. Do identyfikacji kanałów międzynitkowych wprowadzono stereowizyjną metodę trójwymiarowej analizy struktury tkaniny pojedynczej, metodą mikroskanowania 3D fragmentów tkaniny w świetle strukturalnym oraz analizę obrazów mikroskopowych IV-ej generacji. Analiza statystyczna wskaźników przepuszczalności powietrza, oporu pary wodnej i oporu cieplnego płaskich wyrobów włókienniczych wykazała istotne zależności tych przepływów od parametrów kanału a także innych parametrów tkaniny. Określono korelacje między badanymi parametrami i wskaźnikami przepływowymi. Wykazano bardzo silne korelacje wskaźnika przepuszczalności powietrza z: polem prześwitu kanału, licznością osnowy i objętością przybliżoną kanału. Dla wskaźnika oporu pary wodnej uzyskano silną korelację z grubością tkaniny. Dla oporu cieplnego stwierdzono silną korelację ze średnicą wejścia do kanału międzynitkowego. Silne korelacje między parametrami tkaniny i parametrami kanału międzynitkowego uzyskano dla: pola powierzchni prześwitu kanału i objętości przybliżonej kanału, liczności osnowy i pola powierzchni prześwitu kanału, liczności wątku i grubości tkaniny, średnicy wejścia do kanału i grubości tkaniny. Badane wskaźniki przepływowe we wzajemnych zależnościach wykazały średni poziom korelacji. Eksperymentalne testy przepuszczalności powietrza, oporu pary wodnej oraz oporu cieplnego dla tkanin pojedynczych uzupełniły wiedzę o strukturze wyrobu i istotnego wpływu udziału surowca.
Źródło:
Fibres & Textiles in Eastern Europe; 2017, 5 (125); 79-86
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Concept of connection between the Mukhavets and the Bug river as an element of International Waterway E40 development on the Polish-Belarusian border
Koncepcja połączenia rzeki Muchawiec z rzeką Bug jako element rozwoju Międzynarodowej Drogi Wodnej E40 na granicy Polsko-Białoruskiej
Autorzy:
Kalinowski, M.
Kuszewski, W.
Powiązania:
https://bibliotekanauki.pl/articles/111510.pdf
Data publikacji:
2017
Wydawca:
Instytut Morski w Gdańsku
Tematy:
bypass water channel
AGN convention
E40 Inland Waterway
revitalization
inland navigation
kanał obejściowy
AGN
droga wodna E40
rewitalizacja
żegluga śródlądowa
Opis:
International waterway E40 is part of the European inland waterway network of transnational importance. It is a specific link between two seas: the Baltic and the Black Sea. The route runs through three countries, Poland, Belarus, and Ukraine.The article presents the problem of the missing link on E40 IWW, particularly, the lack of adequate quality connection between the Bug and Mukhavets rivers. This missing link is on the Polish-Belarusian border in the high historical value - the fortress of Brest. The article shows three variants of connection. The concepts should not be taken as final projects recommended by the countries through which the concerned section of E40 runs. The article will be useful to create a strategy for the revitalization of international waterway E40 in Poland and will facilitate the decision on the accession and signing of the AGN Convention. The article can also be initial material supporting policies and companies’ development conducting their business, based on infrastructure along the E40 waterway.
W artykule przedstawiono problem brakującego ogniwa MDW E40 w postaci braku odpowiedniej jakości połączenia rzeki Bug z rzeką Muchawiec. To brakujące ogniwo znajduje się na granicy Polsko-Białoruskiej w bezpośrednim sąsiedztwie obszaru o dużych walorach historycznych - twierdzy Brześć. Przedstawione w artykule trzy warianty połączenia mają charakter koncepcji i nie mogą być odbierane jako ostateczne projekty rekomendowane przez kraje przez które przebiega rozpatrywany odcinek drogi wodnej E40. Artykuł będzie przydatny do stworzenia strategii rewitalizacji międzynarodowej drogi wodnej E40 w Polsce oraz ułatwi podjęcie decyzji dotyczącej przystąpienia i podpisania przez Polskę konwencji AGN. Artykuł może również stanowić wstępny materiał wspomagający politykę i rozwój firm prowadzących swoją działalność w oparciu o infrastrukturę zlokalizowaną wzdłuż drogi wodnej E40.
Źródło:
Biuletyn Instytutu Morskiego w Gdańsku; 2017, 32, 1; 30-36
1230-7424
2450-5536
Pojawia się w:
Biuletyn Instytutu Morskiego w Gdańsku
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of tides and waves on near-surface suspended sediment concentrations in the English Channel
Autorzy:
Guillou, N.
Rivier, A.
Chapalain, G.
Gohin, F.
Powiązania:
https://bibliotekanauki.pl/articles/48548.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
suspended sediment concentration
spatial variability
temporal variability
coastal water
English Channel
bathymetry
numerical modelling
ROMS model
MERIS data
Opis:
Numerous ecological problems of continental shelf ecosystems require a refined knowledge of the evolution of suspended sediment concentrations (SSC). The present investigation focuses on the spatial and temporal variabilities of near-surface SSC in coastal waters of the English Channel (western Europe) by exploiting numerical predictions from the Regional Ocean Modeling System ROMS. Extending previous investigations of ROMS performances in the Channel, this analysis refines, with increased spatial and temporal resolutions, the characterization of near-surface SSC patterns revealing areas where concentrations are highly correlated with evolutions of tides and waves. Significant tidal modulations of near-surface concentrations are thus found in the eastern English Channel and the French Dover Strait while a pronounced influence of waves is exhibited in the Channel Islands Gulf. Coastal waters present furthermore strong SSC temporal variations, particularly noticeable during storm events of autumn and winter, with maximum near-surface concentrations exceeding 40 mg l1 and increase by a factor from 10 to 18 in comparison with time-averaged concentrations. This temporal variability strongly depends on the granulometric distribution of suspended sediments characterized by local bimodal contributions of silts and sands off coastal irregularities of the Isle of Wight, the Cotentin Peninsula and the southern Dover Strait.
Źródło:
Oceanologia; 2017, 59, 1
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The results of a mud and rock flow controlling new facility design study
Wyniki badań kontrolowanego spływu gruzowego - nowe studium projektowania obiektów
Autorzy:
Baljyan, P.
Tokmajyan, H.
Hayrapetyan, V.
Zaqaryan, G.
Powiązania:
https://bibliotekanauki.pl/articles/2065473.pdf
Data publikacji:
2017
Wydawca:
Politechnika Częstochowska
Tematy:
water
river
channel
flood
turbulence
reservoir
anti-mudflow
kanał
powódź
turbulencja
osady
spływy gruzowe
Opis:
The analysis of the mud-rock flow controlling facility operation enables to reveal regularities and, consequently, mechanisms providing passage of the given values of solid and liquid flow for different slopes of a channel and parameters of its cross section. To solve such problems it is assumed that if the mud-rock moving along a given slope of a prismatic bed with the maximum concentration, then its flow can be controlled and direct along small slopes of the channel, providing at that the constancy of the first value of sediment carrying capacity. At the same time, the sections of the channel where steepness of the bed is relatively gentle require corresponding design innovations of the mud-and-rock flow controlling facilities. The received design solutions for mudflow controlling structures enable reliable control of mudflows where downward grade is small.
Analiza działania układu kontrolującego zapewniającego spływ gruzowy (mieszaniny błota i skał) pozwala na wykrycie prawidłowości, a w konsekwencji mechanizmów zapewniających przepływ o określonych wartościach składników stałych i wody w przypadku różnego nachylenia kanału i parametrów jego przekroju. Aby rozwiązywać ten problem założono, że mieszanina błota i kamieni o maksymalnej gęstości porusza się w kierunku spadku pryzmatycznego złoża, wówczas jego przepływ może być kontrolowany i kierowany w strefę małych spadków kanału, zapewniając tym sposobem zdolność do przenoszenia osadów. Jednocześnie sekcje kanału, w których spadek koryta jest stosunkowo łagodny, wymagają wprowadzenia innowacji konstrukcyjnych urządzeń do regulowania spływu gruzowego. Otrzymane rozwiązania konstrukcyjne dla struktur regulujących spływ gruzowy umożliwiają niezawodną kontrolę przepływu błota i skał w kanałach o niewielkim nachyleniu.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2017, 2 (20); 109--114
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zmiany koryta dolnej i środkowej Wiernej Rzeki od XVIII wieku
Channel changes of lower and middle courses of the Wierna Rzeka River since the 18th century
Autorzy:
Chrabąszcz, Mariusz
Kalicki, Tomasz
Przepióra, Paweł
Frączek, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/765082.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
młyny wodne
kuźnice
Wierna Rzeka
anastomoza antropogeniczna
zmiany koryta
Water mills
forges
Wierna Rzeka River
anthropogenic anastomosis
river channel changes
Opis:
The aim of this work is to show the influence human activity on small retention and channel changes of the Wierna Rzeka River in last centuries. The Wierna Rzeka River is located in the south-western part of the Holy Cross Mts. region in the Polish Uplands. The Wierna Rzeka River is left tributary of the Biała Nida River. It is classified as a 35.7 km long upland river with an 2.32‰ average slope. The 313.8 km2 large basin has an elongated shape with a meridional extension. The catchment area was located in the south-western part of the Old Polish Industrial District. From the Middle Ages to the end of the 19th century there were at least four forges on the Wierna Rzeka River. There were also water mills built on the former forges infrastructure. The most of mills on the Wierna Rzeka River was built in the second half of the 19th c. and at the beginning of the 20th c. The activity of the forges and mills led to changes in the development of the riverbed and created a pattern of anthropogenic anastomosis. Those changes are documented in archival and cartographic materials. In the second half of the 20th c. the water mills activity was stopped. On the floodplain many remains of metallurgy and mills infrastructure facilities have survived, embankments, canals, mill ponds. Currently, on the Wierna Rzeka River in the abandoned mills area, there are sections of anastomosing channel pattern. As a result of the renaturalization process, many anthropogenic forms disappeared and the drained water reservoirs became part of the floodplain.
Celem opracowania jest przedstawienie wpływu działalności człowieka na zmiany małej retencji i koryta Wiernej Rzeki w ostatnich stuleciach. Wierna Rzeka położona jest w południowo-zachodniej części regionu świętokrzyskiego na obszarze Wyżyn Polskich. Rzeka jest lewobrzeżnym dopływem Białej Nidy. Sklasyfikowana jest jako rzeka wyżynna o długości 35,7 km ze średnim spadkiem 2,32‰. Zlewnia o powierzchni 313,8 km2 ma podłużny kształt o rozciągłości południkowej. Obszar zlewni znajdował się w południowo-zachodniej części Staropolskiego Okręgu Przemysłowego. Od średniowiecza do końca XIX wieku, na Wiernej Rzece funkcjonowały co najmniej cztery kuźnice. Działały tu także młyny, które budowano na dawnej infrastrukturze kuźnic. Najwięcej młynów na Wiernej Rzece wzniesiono w drugiej połowie XIX wieku oraz na początku XX wieku. Działalność kuźnic i młynów przyczyniła się do zmian w rozwinięciu koryta, doprowadzając do powstania anastomoz antropogenicznych. Zmiany te zostały udokumentowane w materiałach archiwalnych i kartograficznych. W drugiej połowie XX wieku działalność młynów została wstrzymana. Na równinie zalewowej zachowały się liczne pozostałości infrastruktury zakładów hutniczych i młynarskich (wały, kanały, stawy młyńskie). Współcześnie na Wiernej Rzece, w miejscu porzuconych młynów, występują odcinki wielokorytowe. W wyniku procesu renaturalizacji wiele form antropogenicznych zostało zatartych, a zdrenowane zbiorniki wodne stały się częścią równiny zalewowej.
Źródło:
Acta Universitatis Lodziensis. Folia Geographica Physica; 2017, 16
1427-9711
2353-6063
Pojawia się w:
Acta Universitatis Lodziensis. Folia Geographica Physica
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies